CHIP AND DUST EXTRACTION SYSTEMS

CHIP AND DUST EXTRACTION SYSTEMS
„
Large range of accessories
Suction hose connection Ø 100 mm
WOOD PROCESSING
TECHNOLOGY
„
Chip and dust extractor
system SPA 1101
Special advantages
„ Aerodynamically shaped fan
wheel made of impact-resistant
ABS plastic for high air output,
low noise and long service life
„ BIA-tested dust filter of G
category
„ The purity value of 0.2 mg/m³ is
maintained continuously.
„ With the GS mark H2, the
machine corresponds to the
cleanliness and safety
requirements.
„ Mobile; stable stand with
supported chip collection bag
„ Costly dust tests at the workplace are not needed
„ For single phase alternating
current
„ For three phase current
Comparative device characteristics
Dimensions L x W x H
Max. vacuum
Max. volume flow
Filter surface
Chip bag capacity
Rated input power
Weight
Standard equipment
Type
Order no.
SPA 2002 W
Chip and dust extractor
system SPA 1702 W
SPA 2002 D
Chip and dust extractor
system SPA 2002 W
Chip and dust extractor
system SPA 2002 D
y
y
y
y
y
y
COMPRESSED AIR SYSTEMS
SPA 1702 W
y
y
y
y
y
y
y
820 x 450 x 1.950 mm
1.300 Pa
842 m³/h
2 m²
60 l
0,37 kW
25 kg
882 x 562 x 1.671 mm
1.730 Pa
1.010 m³/h
1,1 m²
90 l
0,75 kW
24 kg
1.085 x 735 x 1.974 mm
2.430 Pa
1.038 m³/h
3,45 m²
135 l
1,4 kW
95 kg
1.085 x 735 x 1.974 mm
2.430 Pa
1.038 m³/h
3,45 m²
135 l
2 kW
95 kg
Suction hose
100 x 2500 mm
Suction hose
100 x 2500 mm
Suction hose
100 x 2500 mm
Suction hose
100 x 2500 mm
SPA 1101
0130011004
0130011012 GB 230 V
SPA 1702 W
0130170100
SPA 2002 W
0130200100
SPA 2002 D
0130200110
| 273
WATER AND PUMP TECHNOLOGY
SPA 1101
GRINDING MACHINES
WELDING TECHNOLOGY
EQUIPMENT FEATURES
„
For connecting to all wood processing machines
„
Healthy air at the workplace: Clean air – clean work
„
High suction output
„
Mobile use, easy to connect
CHIP AND DUST EXTRACTOR UNITS
Suction adapter
Filter cartridges
„
Filters the finest dust
particles
Order no.
100 mm
diameter-Ø
Suitable for
58 mm
44 mm
diameter-Ø
Order no.
SPA 1000, SPA 1100,
SPA 1101
SPA 1700 D, SPA 1701 W,
SPA 1702 W
SPA 2001 W, SPA 2001 D,
SPA 2002 W, SPA 2002 D
Filter area 5.2 m²
Ø 327 x 857 mm
Filter area 5.2 m²
Ø 327 x 857 mm
Set of pocket filters with
mounted filter plate
(as spare)
0913005058
Suitable for
Packing unit
Order no.
SPA 1000, SPA 1100,
SPA 1101
SPA 1700 D, SPA 1701 W,
SPA 1702 W
SPA 2001 W, SPA 2001 D,
SPA 2002 D, SPA 2002 W
10
0913007123
bore-Ø
44 mm
58 mm
0920016529
100 mm
bore-Ø
0913059441
bore-Ø
44 mm
58 mm
Suction adapter Multi
for KGS 255 / KGS 305 / TS 250
for KGS 303 only with chip and
dust extractor unit order no.
0910057561
0910058010
0910031260
Suction adapter - nozzles
For the connection of wet/dry
vacuum cleaners to the wood
processing machines
Including 2 locking plugs for any
bypass holes there may be in the
suction connection (Secanta)
Chip collector bags
99 mm
diameter-Ø
92-95 mm
diameter-Ø
99 mm
diameter-Ø
10
0913017617
10
0913059433
Universal adapter
As a coupling for transition
ring or extraction adaptor
nozzle DH 330
As a hose connection for the
cleaning nozzle
0913031288
Diversions
Order no.
Suction hoses, Ø 100 mm
99 mm
diameter-Ø
Length
m
Diameter
mm
Order no.
2,5
5
10
100
100
100
7854018544
7854112915
7854115035
Diversion
For connecting 2 hoses to the
chip and dust extractor unit
93 mm
bore-Ø
Y-pieces
Hose connection set, Ø 100 mm
„
„
0913031296
Order no.
For the length extension of the
standard hose of the chip and dust
extraction systems
Incl. adapter and transition ring
58 mm
bore-Ø
100 mm
diameter-Ø
Y-piece
„ With locking plug 58 mm
0910060090
100 mm
bore-Ø
Order no.
Hose connection set SPA 1101/1702
Length: 2.5 m
Suitable for: SPA 1000, SPA 1100, SPA 1101, SPA 1700 D,
SPA 1701 W, SPA 1702 W
Hose connection set SPA 2002
Length: 2 m
Low flammability with inserted earth cable
Suitable for: SPA 2000 D, SPA 2001 W, SPA 2001 D,
SPA 2002 D, SPA 2002 W
0913010779
0913013565
Order no.
Nozzles
Order no.
Cleaning nozzle
For cleaning floors and
machines
99 mm
diameter-Ø
0913031270
Transition rings
Order no.
99 mm
diameter-Ø
100 mm
bore-Ø
274 |
Transition ring
As a coupling for the universal
adapter and for the diversion
Comes as standard with all chip
and dust extractor units
Automatic switch-on devices
„ Automatic switching on and off of the chip and dust extraction
system after the wood processing machine has been switched
on or off
„ Time-delayed: in this way, even residual dust is extracted
0913031300
Automatic switch-on device ALV 1
2 alternating current sockets (230 V)
200 VA - 2300 VA
IP 44
340 g
Mains voltage: 220-240 V
Mains frequency: 50 - 60 Hz
Dimensions: 158 x 116 x 60 mm
Suitable for: SPA 1000, SPA 1100,
SPA 1701 W, SPA 2001 W, SPA 1101,
SPA 1702 W, SPA 2002 W
Automatic switch-on device ALV 10
2 alternating current sockets (230 V)
2 three-phase sockets (400 V)
Mains connection with phase inverter
Mains voltage: 220-240 V / 380-400 V
4 screwing options M 5 x 7.2 mm
IP 44
Mains voltage: 230/400 V
Mains frequency: 50 - 60 Hz
Fuse protection: T 16 A
Dimensions: 235 x 106 x 155 mm
Suitable for: SPA 1000, SPA 1700 D,
SPA 2000 D, SPA 1100, SPA 1701 W,
SPA 2001 W, SPA 2001 D, SPA 1101,
SPA 1702 W, SPA 2002 W, SPA 2002 D
0913014626
0913014634
LATHES
„
For ideal working height and secure base
Robust, powder-coated sheet steel construction
0912003612
Driver prong
Order no.
Driver tip Ø 80 mm
0912003760
Lathe chuck
WELDING TECHNOLOGY
„
GRINDING MACHINES
Order no.
WOOD PROCESSING
TECHNOLOGY
Stands
EQUIPMENT FEATURES
„
Four speeds
„
Thick galvanised steel pipes for outstanding quality
„
For large workpieces
„
Galvanised and powder-coated for permanent protection
of machine
„
Quiet
„
Large range of accessories
„
Ideal adaptation to all material qualities and sizes
Order no.
Lathe
HDM 1000
Comparative device characteristics
Height without stand
Height with stand
Overall length
Distance between centres
Height of centres
Max. height of centres
Spindle thread
Spindle speed
Sleeve taper
Sleeve stroke
Rated input power
Output power
Diameter of surface plate
Diameter of front lathe dog
Standard equipment
0912003620
0912003639
Drill chuck protection
470 mm
1.170 mm
1.000 mm
160 mm
320 mm
M 20 x 1,5
700/1.100/1.600/2.200 /min
MK3
50 mm
0,67 kW
0,45 kW
150 mm
30 mm
Order no.
Cover for the lathe chuck
0912003647
Lathe chuck set
Order no.
Consisting of:
Bung chuck Ø 30 mm / Ø 70 mm
and screw chuck Ø 59 mm
0912003728
Copying equipment
Surface plate, front lathe dog,
revolving centre
Order no.
For side grain copying following a template
Ideal for the production of small-scale series
production parts
„ With universal chisel
Copying template not included in scope of delivery
„
0912003655
„
Type
Order no.
HDM 1000
0122100022
0122100073
GB
230 V
| 275
COMPRESSED AIR SYSTEMS
3-jaw lathe chuck with clamping collar
Max. opening of jaws, inside Ø 120 mm,
outside Ø 150 mm, M 20 x 1.5
4-jaw lathe chuck with clamping collar
Max. opening of jaws, inside Ø 130 mm,
outside Ø 165 mm, M 20 x 1.5
WATER AND PUMP TECHNOLOGY
HDM 1000
LATHES
Universal chisel for copying equipment
Sanding sheets for disc sanding equipment
Order no.
With replaceable cutting tip and
protective screen
To be used in combination with copying
equipment
Cutting tips for universal chisel,
1 pair
Spare cutting tips with fastening
screw
Grit
Diameter
mm
Order no.
K 60 KP 31 B
K 80 KP 31 B
250
250
9131077820
9131077839
0912003671
0912029280
Geared chuck
Order no.
Geared chuck taper arbor
Chuck capacity: 3 - 16 mm
Templates for copying attachment
0912000982
Order no.
To be used in combination with
copying equipment
1 x neutral, 6 x cam templates
„
0912003663
Flexible shaft
Order no.
Interior diameter turning steel
Order no.
Drilling depth max. 100 mm
Drilling diameter max. 80 mm
0912003752
Capacity: 0 - 8 mm
Length: 1.2 m
Additional support
Order no.
„
„
For processing thin glazing bars
and rods Ø 10 - 135 mm
With three adjustable
start-up rollers
0912005070
Turning chisel set
Order no.
Consisting of:
3 gouges (10/18/24 mm), 2 flat chisels (15/25 mm),
2 pointed chisels (13/16 mm)
and a round chisel (16 mm)
0912003698
Disc sanding equipment
Order no.
For easy grinding of wooden parts
0912003680
including sanding sheets K60 and K80
(1 each)
Grinding plate Ø: 250 mm
Grinding table dimensions:
150 x 220 mm
„
276 |
0911001004
LOG CUTTING SAWS
„
GRINDING MACHINES
WELDING TECHNOLOGY
„
Sturdy welded construction – therefore no corrosion
and suitable for tough continuous use
For three phase current
WOOD PROCESSING
TECHNOLOGY
EQUIPMENT FEATURES
„
Ready mounted
„
Suitable for thickest logs
„
With wheel Set and phase inverter
„
Optimum work safety
Firewood
jigsaw
BW 600
Special advantages
„ Optimum pivotal point
for easy work
Firewood
jigsaw
BW 750
Circular saw blades
„
y
„
„
Comparative device
characteristics
Dimensions L x W x H
Saw blade diameter
Cutting diameter
- With reversing tool
Working height
Balance surface, left
Balance surface, right
Cutting speed
Rated input power
Standard equipment
Type
Order no.
„
1.225 x 795 x
1.050 mm
600 mm
210 mm
320 mm
900 mm
540 mm
155 mm
45,5 m/s
4,2 kW
760 x 620 x
960 mm
700 mm
240 mm
350 mm
780 mm
500 mm
200 mm
55 m/s
7,4 kW
Circular saw blade
with peg tooth (56
teeth), chassis
Carbide-tipped
circular saw blade
with alternately
bevel-ground tips
(42 teeth), chassis
BW 600
0106004200
Material
Top cutting results thanks to teeth ground on
all sides and high accuracy of flatness and
concentric running
Tungsten carbide blades: Long service life
thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Dimensions
mm
Tooth
pitch
Version
Order no.
56
Peg tooth
0910003445
600 x 3,8 x 30
26
Alternatively 0910003470
bevel-ground
tips
For BW 750 HW
Electro steel
700 x 3,2 x 30
56
Peg tooth
0910003399
Chrome700 x 3,2 x 30
vanadium steel
56
Peg tooth
0910003453
Tungsten
carbide
42
Alternatively 0910003488
bevel-ground
tips
For BW 600
Chrome600 x 2,8 x 30
vanadium steel
Tungsten
carbide
700 x 4,2 x 30
BW 750
0190707500
| 277
COMPRESSED AIR SYSTEMS
BW 750
WATER AND PUMP TECHNOLOGY
BW 600
LOG SPLITTERS
EQUIPMENT FEATURES
„
With mobile stand – for a back-friendly working height
and easy transportation
„
Guide plates directly at the splitting point for better guidance
of shorter wooden pieces
„
5 tonne splitting force for firewood up to 250 mm Ø
„
Motor with 2200 Watt power and for protection with overload
switch
„
Optimum protected two-hand safety circuit
„
For adjusting to the wood length: stroke adjustable in three
steps and additionally adjustable piston length
„
For single phase alternating current
EQUIPMENT FEATURES
„
Easy and safe handling by 2-lever safety circuit
„
Hardened splitting wedge
„
Large recessed safety handles for protection and for
maximum safety
„
Wheel set for easy transportation
„
Foldable hoop guard protects the splitting material from
breaking apart and falling in an uncontrolled manner
„
Table can be adjusted to three levels for the processing
of longer logs
„
Closed lower housing section for more stability.
Optimum
protection for the hydraulic system.
„
Ergonomically located on/off switch
HS 5000 W
HS 6001 W
HS 6001 D
NEW
NEW
NEW
Log splitter
HS 5000 W
Comparative device characteristics
Splitting force
Split length (maximum)
Max. stroke height
Feed
Return
Dimensions L x W x H
Rated input power
Weight
5t
520 mm
320 mm
4,5 cm/s
9,5 cm/s
1.200 x 260 x 485 mm
2,2 kW
50 kg
Log splitter
HS 6001 W
Special advantages
Phase inverter
„ For single phase
alternating current
„ For three phase current
Rated input power
Weight
Type
Order no.
278 |
HS 5000 W
0170005000
y
„
Comparative device
characteristics
Splitting force
Split length (maximum)
Max. stroke height
Feed
Return
Dimensions L x W x H
Type
Order no.
Log splitter
HS 6001 D
y
y
6t
1.040 mm
480 mm
4 cm/s
14 cm/s
860 x 930 x
1.040 mm
3 kW
122 kg
6t
1.040 mm
480 mm
5 cm/s
14 cm/s
860 x 930 x
1.040 mm
3,5 kW
125 kg
HS 6001 W
0170006001
HS 6001 D
0170006101
LOG SPLITTERS
„
For pushing onto the splitting blade
Number of operating cycles and required time is halved
Order no.
Cross cutter SW6 / SD6 / SD 6-1000
0910007815
Cross cutter HS 6000 W/D HS 8000 D Combi
Pot-galvanised
0910057570
Cross cutter HS 6001 W/D
0910063936
Splitting wedge width extension
HS 8000 D
Combi
Order no.
For pushing onto the splitting blade
Pot-galvanised
Suitable for: HS 6000 W, HS 6000 D
and HS 8000 D Combi
„
Log splitter
HS 8000 D Combi
Type
Order no.
8t
1.085 mm
475 mm
7,3 cm/s
23,7 cm/s
730 x 520 x 1.120 mm
4 kW
126 kg
Hydraulic oil
Order no.
To top up oil in the event of oil
shortage
1 litre
„
0910011936
HS 8000 D Combi
0170800001
| 279
WATER AND PUMP TECHNOLOGY
Comparative device characteristics
Splitting force
Split length (maximum)
Max. stroke height
Feed
Return
Dimensions L x W x H
Rated input power
Weight
0910058614
GRINDING MACHINES
„
COMPRESSED AIR SYSTEMS
Cross cutters
WELDING TECHNOLOGY
WOOD PROCESSING
TECHNOLOGY
EQUIPMENT FEATURES
„
Easy and safe handling by 2-lever safety circuit
„
Hardened splitting wedge
„
Large recessed safety handles for protection
and for maximum safety
„
Wheel set for easy transportation
„
Foldable hoop guard protects the splitting material from
breaking apart and falling in an uncontrolled manner
„
Phase inverter
„
Two swivelling splitting tables for 3 stages
„
For three phase current