Wybron Brochures

 ENTERTAINMENT EQUIPMENT SUPPLIES, S.L.
C/ Donostia 118
Apartado Postal 111
20115 ASTIGARRAGA (Guipúzcoa)
Tel. +34 943 33 71 50 . Fax +34 943 33 31 93
http://www.ees.es . E-Mail: info@ees.es BROCHURE 2011
Specifications–7.5-inch, Lrg. Frmt.
Color Changers
Power/Data
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
General
A component of the Wybron Infotrace Series
of Products
Color position /main address
user selectable 1-512
Remote fan and/or Time to Destination addresses
user selectable 1-512
Sub parameter addresses do not need to be
contiguous to main color position address
Outdoor-rated (IP 65), weather-resistant models
2 - 32 individual gel frames on 7.5” model
2 – 24 individual gel frames on the Six Light,
Eight Light and Large Format model
Color LCD display and 4 membrane buttons
for user settings
Front mounting plate for additional accessories
Parameters and features selectable
with Infotrace/RDM:
Base Address
Sub Parameter Address (Fan Remote / Time
to Destination)
Self Test Mode
Wide selection of fixture mounting plates
Integrated stainless steel safety cable
Infotrace/RDM feedback information
.063” aluminum sheet metal construction
Aperture Light Sensor
Voltage Sensor
3 second end to end string movement (32 frames)
Unit Temperature Sensor
Fan RPM
9 operating personalities for different
performance characteristics
Pass Through Current
Roller Stuck
Hours Since Last
Maintenance
Init Fail
“Time to Destination” option for gel movement
Gel Colors (on IT
equipped gel strings)
Fan Stopped
Accepts power and data on one cable
Gel Temperature Sensor
High Motor Current
4 pin XLR connector for power and data
Gel string Broken Alert
Low Voltage Alert
4 pin XLR connector output for
daisy chaining units
Gel string Replacement
Period Reached
Gel Wear Counter
Fan speed may be remote controlled or set to
one of three options
Reverse polarity protection, unit will not be
damaged by RAM II style PSUs
Made in USA
Specifications–7.5-inch, Lrg. Frmt.
Color Changers
Dimensions & Weights
Ordering Information
7.5-inch Model 87080
AQUARAM IT Color Changer
Model
Description
7.5-inch color changer
87080
85000
Large Format color changer
PS-SERIES Power Supply
820150
150W power Supply
820300
300W power Supply
820600
600W power Supply
AQUARAM IT Accessories
Power/Data Cable (XX=Length)*
7042-XX
AQUARAM IT Gel Strings**
87089–XX
7.5-inch gel string (XX=number of frames up to 32)
850019–XX Lrg Format gel string (XX=number of frames up to 24)
AQUARAM IT Mounting Plate INCLUDED. To specify size, see website.
3.92"/100mm
3.62"/92mm
1.47"/37mm
3.25"/82mm
13.89"/353mm
16.67"/424mm
11.72"/184mm
7.25"/184mm
7.38"/187mm
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
** See COLOREXPRESS Gel Strings for available colors
3.39"/
86mm
Weight: 10.0 lbs./4.6kg without mounting plate
Large Format Model 85000
3.77"/96mm
4.58"/116mm
4.21"/107mm
24.71"/628mm
25.88"/657mm
18.16"/461mm
18.16"/461mm
6.61"/
168mm
Weight: 15.5 lbs./7kg without mounting plate
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications-AUTOPILOT II 3-D Tracking System
®
3 - D Tra ck i n g S y s t e m
Power/Data
Accepts all standard voltages worldwide
(100-132 VAC 50/60 Hz and 170-240 VAC 50/60 Hz
XLR Connector Pin In/Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
Empty
5
Empty
Conductor Size
22 AWG
22 AWG
22 AWG
22 AWG
22 AWG
Control
General
Track up to 4 performers in three-dimensional
space and real time within a 2400 sq. ft. area
Rack mountable or stand alone
.063” aluminum sheet metal construction
Color LED display indicating power and data
An Autopilot System consists of:
4 Beltpacks/Beltpack Elements
8 Ceiling Receivers
Controller
PC-based,* and uses advanced software
to give you total point-and-click control from
your laptop
Adjustable Height Option lets you center the
light beam anywhere vertically on the
performer's body
Autosize Option allows you to hold constant light
beam size regardless of performer location
Customize Boundary Option lets you control fade
distance at edges of performance area
Configurable Dead Zone Option lets you create a
zone in which a highly active performer can move
without the lights moving
Zoning Option lets you sub-divide a performance
area into independent coverage zones, with
automatic spotlight cross-fading
5 pin XLR connector for DMX data
7 pin XLR connector for power and signal to
and from receivers
Made in the USA
* does not include computer
Uses DMX512-A Protocol
Setup, adjustment, operation and diagnostics are
now graphic, and an ease to use
Passes all console directed DMX data to lights
The system controller continuously generates
new pan & tilt information and inserts it into the
data stream as it’s sent to the corresponding lights
Control up to 60 moving lights–for a current list of
manufacturers see (http://www.wybron.com/
support/software/autopilot/
Specifications-AUTOPILOT II 3-D Tracking System
®
3 - D Tra ck i n g S y s t e m
Basic Setup - AUTOPILOT System
Dimensions & Weights
AUTOPILOT II Controller/System Model 5050*
16.72"/425mm
Ceiling
Receiver 3
Ceiling
Receiver 4
15.23"/387mm
DMX Signal Out
Ceiling
Receiver 5
DMX Signal In
Ceiling
Receiver 6
Ceiling
Receiver 2
Ultrasonic
Signal
DMX Signal In
Beltpack & Element
Ceiling
Receiver 1
1.27"/32mm
19.00"/483mm
Temperature Sensor
Ceiling
Receiver 7
Ceiling
Receiver 8
5.25"/
133mm
®
Lighting Console
Weight: 12.36 lbs./5.61kg
*includes eight receivers, four beltpacks, one controller,
temperature sensor, necessary cable, batteries, target,
tripod and tape measure
PC Laptop
System Controller
Manufactured under US Patent 5,504,477 & European Patent EP95902637-8
AUTOPILOT II Receiver Model 5085
3.38"/86mm
Ordering Information
3.38"/86mm
2.00"/51mm
2.00"/51mm
5.75"/146mm
7.50"/190mm
1.00"/25mm
AUTOPILOT 3-D Tracking System
Model
Description
5050
3-D Tracking System
AUTOPILOT 3-D Tracking System Accessories
5025-XX
Receiver cable (XX=25’, 50’, 100)
5080
Beltpack
5085
Receiver
5056
Temperture Sensor
Targets
505-03-03
505-08-10
Tripod
505-08-34
Tape Measure
Weight: 1.14 lbs./.52kg
AUTOPILOT II Beltpack Model 5080
3.55"/90mm
2.40"/61mm
.82"/21mm
1.15"/29mm
.82"/21mm
Weight: .24 lbs./.11kg
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Beam Luminaire
Specifications-CDM Source
Beam Luminaire Features
• 150 watt compact,
UHI light source
producing a minimum
of 600,000 Candelas
• Metal parabolic
reflector standard,
cold light coated
glass reflector
optional
• Compact design
• Superior
beam quality
• Precision spun
steel body
• 150 watt compact,
CDM light source
producing a minimum
of 350,000 Candelas
• Unique T-slot modular
connecting system for
unlimited hanging options
This compact, next generation beam projector uses the
BP-2 Dimensions
latest developments in optical and mechanical design,
to give today’s lighting designers another tool in their
ever expanding arsenal of lighting effects. The BP-2
Beam Luminaire produces an extremely intense soft
edge narrow 10°-13° beam (lamp dependent) of light
several times more intense than an ordinary spotlight
of similar wattage.
12.056"/306.22mm
15.474"/393.04mm
13.687"/347.65mm
18.99"/482.35mm
11.968"/303.99mm
17.91"/454.91mm
6.72"/170.69mm
13.775"/349.89mm
Built of rugged spun steel, with a metal parabolic
10.375"/263.53mm
16.718"/424.64mm
UHI light source. Its unique T-slot modular connection
system allows the designer to combine an unlimited
number of BP-2s in any desired array to satisfy any
lighting situation.
The BP-2 makes a statement by breaking through the
atmosphere on a stage or used architecturally as a
long-throw wash to light specific areas brillantly. And
the BP-2 is economical, easy-to-use and manufactured
with Wybron’s legendary reliability .
17.03"/432.56mm
11.208"/284.68mm
7.363"/187.02mm
reflector, it uses a high output, compact 150W CDM or
Specifications-CDM Source
Beam Luminaire
Physical
Housing: Precision spun, cold rolled 1mm steel housing
Photometrics–150W CDM Lamp @ 115V
Narrow Focus
Degree
Yoke: Flat steel with two mounting positions
13°
Accessories: Accepts up to two standard 12" accessories;
Standard spring-loaded safety latch
Field Lumens
Efficacy
Efficiency
390,000 (Cd)
1919
12.8 LPW
13.7%
Distance (ft)
30
50
100
150
Field Diameter (ft)
7.0
11.7
23.3
35
Illumination (fc)
433
156
39
17
13°
Beam Angle
5/8” T-slot mounting rails every 90°
Candlepower
Safety Cable: 3.5 ft./1.06m long cable included
Finish: High temperature black powder coat, other colors
available, consult factory
6°
Weight: 14.3 lbs. (6.5 kg)
Field Angle
High impact, thermally insulating handle
Optical
Reflector: Parabolic metal
Concentric ring system to control light spill
Candlepower Distribution
450,000
Tempered safety glass lamp containment & UV blocker
400,000
Candela
Lamp
Socket: G12 style, rated to 350º C
Tool free precision lamp alignment
350,000
300,000
250,000
200,000
150,000
Electrical
Power Supply: Ballast voltage 120-277VAC
100,000
Cable: 36" Teflon coated leads encased in heat resistant
black fiberglass sleeve
50,000
0
0
5
10
15
Degrees
Accessories
Optional malleable iron pipe clamp
Specifications as of 3/5/05 and may be subject to change
Optionally available with installed Stage pin, Twist lock &
Edison connectors
Lamp Data
Lamp Model
Lamp Watts(nominal)
CDM150T6830 UHI-S150DW/A/UVP
150
150
Rated Lumens
14,000
13,000
Rated Hours
10,000
10,000
Color Temp
3000K
3000K
85
80
93Lm/W
80Lm/W
Color Rendering Index
Efficacy
(Luminous Output)
Ordering Information
BP-2 Beam Luminaire
Model
Description
9520
BP-2 Beam Luminaire CDM (metal reflector)
BP-2 Beam Luminaire Accessories
256-08-21
Malleable Iron C-clamp
CDM150T6830
Lamp, CDM 150W w/UV Fade Block
UHI-S150DW/A/UVP
Lamp, UHI 150W
BP-2 AC Power Connectors
S
Stage Pin Connector
T
Twist Lock Connector
E
Edison Connector
TEL 800•624•0146 • TEL 719•548•9774 • FAX 719•548•0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Beam Luminaire
Specifications-Tungsten Source
Beam Luminaire Features
• Metal parabolic
reflector standard,
cold light coated
glass reflector
optional
• Compact design
• Precision spun
steel body
• Superior
beam quality
• 575W-750W tungsten
source producing a
minimum of 600,000
Candelas
• Unique T-slot modular
connecting system for
unlimited hanging options
This compact, next generation beam projector uses the
BP-2 Dimensions
latest developments in optical and mechanical design,
to give today’s lighting designers another tool in their
ever expanding arsenal of lighting effects. The BP-2
Beam Luminaire produces an extremely intense soft
edge narrow 10° beam of light several times more
13.687"/347.65mm
12.056"/306.22mm
11.968"/303.99mm
15.474"/393.04mm
13.775"/349.89mm
5.813"/147.65mm
Built of rugged spun steel, with either a metal or cold
light coated glass, modified-parabolic reflector, it may
10.375"/263.53mm
be lamped withup to a 800W 230V tungsten source.
16.718"/424.64mm
Its unique T-slot modular connection system allows
the designer to combine an unlimited number of BP2s in any desired array to satisfy any lighting situation.
The BP-2 makes a statement by breaking through the
atmosphere on a stage or used architecturally as a
long-throw wash to light specific areas brillantly. And
the BP-2 is economical, easy-to-use and manufactured
with Wybron’s legendary reliability .
11.208"/284.68mm
7.363"/187.02mm
intense than an ordinary spotlight of similar wattage.
Specifications-Tungsten Source
Beam Luminaire
Physical
Housing: Precision spun, cold rolled 1mm steel housing
Photometrics–Tungsten 575W GLC Lamp @ 115V
Narrow Focus
Degree
Yoke: Flat steel with two mounting positions
Accessories: Accepts up to two standard 12" accessories;
Standard spring-loaded safety latch
Field Lumens
Efficacy
Efficiency
600,000 (Cd)
5257
9.14 LPW
33.9%
Distance (ft)
30
50
100
150
Field Diameter (ft)
7.0
11.7
23.3
35
Illumination (fc)
665
239
60
27
10°
Beam Angle
10°
5/8” T-slot mounting rails every 90°
Candlepower
Safety Cable: 3.5 ft./1.06m long cable included
Finish: High temperature black powder coat, other colors
available, consult factory
5°
Weight: 11.3 lbs. (5.13 kg) (Metal Reflector Model)
Field Angle
High impact, thermally insulating handle
Optical
Reflector: Metal or dichroic coated cold light mirror
Candlepower Distribution
Concentric ring system to control light spill
700,000
Tempered safety glass lamp containment
600,000
500,000
Candela
Lamp
Socket: G9.5 style, rated to 350º C
Tool free precision lamp alignment
400,000
300,000
200,000
Electrical
Power Supply: Lamp line voltage-lamp dependent
100,000
Cable: 36" Teflon coated leads encased in heat resistant
black fiberglass sleeve
0
0
5
Accessories
Optional malleable iron pipe clamp
Optionally available with installed Stage pin, Twist lock &
Edison connectors
Lamp Data
ANSI
Code
Watts
Rated
VAC
Color
Temp
Rated
Hours
Rated
Lumens
GLC
575
115
3200
400
15500
GLA
575
115
3100
1500
13500
GKV
600
230
3200
400
15000
GLB
600
230
3100
1500
13000
6981P
750
115
3200
300
19000
GLE
750
115
3050
1500
17400
6982P
800
230
3200
250
20000
HX800
800
230
3200
250
20000
10
Degrees
15
Ordering Information
BP-2 Beam Luminaire
Model
Description
9500
BP-2 Beam Luminaire (metal reflector)
9510
BP-2 Beam Luminaire (glass reflector)
BP-2 Beam Luminaire Accessories
256-08-21
Malleable Iron C-clamp
287391
Lamp, GLC 115V
294322
Lamp, GLA 115V
363721
Lamp, GKV 230V
363739
Lamp, GLB 230V
134205
Lamp, 6981P 115V
92773
Lamp, GLE 115V
134203
Lamp, 6982P 230V
39754
Lamp, HX800 230V
BP-2 AC Power Connectors
S
Stage Pin Connector
T
Twist Lock Connector
E
Edison Connector
Specifications as of 3/3/05 and may be subject to change
TEL 800•624•0146 • TEL 719•548•9774 • FAX 719•548•0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
20
Specifications–4-inch, 7.5-inch & 10-inch
Color Changers
Power/Data
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
General
A component of the Wybron Infotrace Series
of Products
2 - 32 individual gel frames on 4” (Source Four)
& 7.5” models
2 – 24 individual gel frames on 10” model
Color LCD display and 4 membrane buttons
for user settings
Front mounting plate for additional accessories
Wide selection of fixture mounting plates
Color position /main address
user selectable 1-512
Remote fan and/or Time to Destination addresses
user selectable 1-512
Sub parameter addresses do not need to be
contiguous to main color position address
Parameters and features selectable
with Infotrace/RDM:
Base Address
Sub Parameter Address (Fan Remote / Time
to Destination)
Self Test Mode
Integrated stainless steel safety cable
.063” aluminum sheet metal construction
Infotrace/RDM feedback information
3 second end to end string movement (32 frames)
Aperture Light Sensor
Voltage Sensor
9 operating personalities for different
performance characteristics
Unit Temperature Sensor
Fan RPM
Pass Through Current
Roller Stuck
Hours Since Last
Maintenance
Init Fail
Accepts power and data on one cable
Gel Colors (on IT
equipped gel strings)
Fan Stopped
4 pin XLR connector for power and data
Gel Temperature Sensor
High Motor Current
4 pin XLR connector output for
daisy chaining units
Gel string Broken Alert
Low Voltage Alert
Gel string Replacement
Period Reached
Gel Wear Counter
Fan speed may be remote controlled or set to
one of three options
“Time to Destination” option for gel movement
Reverse polarity protection, unit will not be
damaged by RAM II style PSUs
The quietest, most reliable color changer
ever manufactured by Wybron
Made in USA
Specifications–4-inch, 7.5-inch & 10-inch
Color Changers
Dimensions & Weights†
4-inch Model 84520
7.5-inch Model 87110
3.60"/92mm
3.23"/82mm
12.81"/325mm
2.68"/68mm
3.01"/
76mm
11.34"/288mm
11.0"/279mm
7.50"/191mm
9.35"/237mm
5.0"/127mm
5.0"/127mm
7.50"/191mm
9.80"/249mm
2.68"/68mm
3.45"/88mm
3.05"/78mm
2.59"/
66mm
Weight: 4.5 lbs./2.04kg without mounting plate
Front Door: 6.25” accessory holder
Weight: 5.5 lbs./2.45kg without mounting plate
Front Door: 10.0” accessory holder
10-inch Model 810100
Ordering Information
3.18"/81mm
3.05"/78mm
2.68"/68mm
15.29"/388mm
2.62"/
66mm
Weight: 7.0 lbs./3.26kg without mounting plate
Front Door: 12.0” accessory holder
13.53"/344mm
10.0"/254mm
10.0"/254mm
COLORAM IT Color Changer
Model
Description
84520
4-inch color changer
87110
7.5-inch color changer
810100
10-inch color changer
PS-SERIES Power Supply
820150
150W power supply
820300
300W power supply
820600
600W power supply
COLORAM IT Accessories
Power/Data Cable (XX=Length)*
7042-XX
COLORAM IT Gelstrings**
84509–XX
4-inch gelstring (XX=number of frames up to 32)
87049–XX
7.5-inch gelstring (XX=number of frames up to 32)
810059–XX
10.0-inch gelstring (XX=number of frames up to 24)
COLORAM IT Mounting Plate INCLUDED. To specify size, see website.
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
** See COLOREXPRESS Gelstrings for available colors
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications–15-inch, Lrg. Frmt., & Eight Light
Color Changers
Power/Data
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
General
A component of the Wybron Infotrace Series
of Products
2 – 24 individual gel frames on the 15-inch, large
format and eight light models
Color LCD display and 4 membrane buttons
for user settings
Front mounting plate for additional accessories
Color position /main address
user selectable 1-512
Remote fan and/or Time to Destination addresses
user selectable 1-512
Sub parameter addresses do not need to be
contiguous to main color position address
Parameters and features selectable
with Infotrace/RDM:
Base Address
Sub Parameter Address (Fan Remote / Time
to Destination)
Self Test Mode
Wide selection of fixture mounting plates
Integrated stainless steel safety cable
Infotrace/RDM feedback information
.063” aluminum sheet metal construction
Aperture Light Sensor
Voltage Sensor
Unit Temperature Sensor
Fan RPM
Pass Through Current
Roller Stuck
Fan speed may be remote controlled or set to
one of three options
Hours Since Last
Maintenance
Init Fail
“Time to Destination” option for gel movement
Gel Colors (on IT
equipped gel strings)
Fan Stopped
Gel Temperature Sensor
High Motor Current
Gel string Broken Alert
Low Voltage Alert
Gel string Replacement
Period Reached
Gel Wear Counter
3 second end to end string movement (32 frames)
9 operating personalities for different
performance characteristics
Accepts power and data on one cable
4 pin XLR connector for power and data
4 pin XLR connector output for
daisy chaining units
Reverse polarity protection, unit will not be
damaged by RAM II style PSUs
The quietest, most reliable color changer ever
manufactured by Wybron
Made in the USA
Specifications–15-inch, Lrg. Frmt., & Eight Light
Color Changers
Dimensions & Weights
Eight Light Model 816080
15-inch Model 815010
3.15"/80mm
4.67"/119mm
3.67"/93mm
3.46"/88mm
20.27"/515mm
15.07"/383mm
17.90"/455mm
32.97"/837mm
25.30"/643mm
22.74"/577mm
11.50"/292mm
11.50"/292mm
14.18"/360mm
26.61"/676mm
20.33"/516mm
8.12"/
206mm
Weight: 13.0 lbs./5.8kg without mounting plate
6.36"/
162mm
Weight: 13.5 lbs./6.0kg without mounting plate
Large Format Model 816090
Ordering Information
3.57"/91mm
3.14"/80mm
22.28"/566mm
19.84"/504mm
6.35"/
161mm
25.27"/642mm
17.61"/447mm
16.42"/417mm
COLORAM IT Color Changer
Model
Description
815010
15-inch color changer
816090
Large format color changer
816080
Eight-light color changer
PS-SERIES Power Supply
820150
150W power supply
820300
300W power supply
820600
600W power supply
COLORAM IT Accessories
Power/Data Cable (XX=Length)*
7042-XX
COLORAM IT Gelstrings**
815009–XX
15-inch gelstring (XX=number of frames up to 24)
81609–XX
Lrg. frmt. gelstring (XX=number of frames up to 24)
816049–XX
8-light gelstring (XX=number of frames up to 24)
COLORAM IT Mounting Plate INCLUDED. To specify size, see website.
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
** See COLOREXPRESS Gelstrings for available colors
Weight: 15.5 lbs./7.0kg without mounting plate
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications–4-inch, 7.5-inch, 12-inch
Color Changers
Power/Data
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
General
A component of the Wybron Infotrace Series
of Products
Two individual gel strings with multiple densities
of CMY for exceptional color integration
432 distinct colors available
User definable end frames
Color LCD display and 4 membrane buttons
for user settings
Front mounting plate for additional accessories
Color position /main address,
user selectable 1-512
Remote fan and/or Time to Destination addresses,
user selectable 1-512
Sub parameter addresses do not need to be
contiguous to main color position address
Parameters and features selectable
with Infotrace/RDM:
Base Address
Sub Parameter Address (Fan Remote / Time
to Destination)
Self Test Mode
Wide selection of fixture mounting plates
Integrated stainless steel safety cable
Infotrace/RDM feedback information
.063” aluminum sheet metal construction
Aperture Light Sensor
Voltage Sensor
Multiple operating personalities for different
performance characteristics
Unit Temperature Sensor
Fan RPM
Pass Through Current
Roller Stuck
Hours Since Last
Maintenance
Init Fail
Gel Colors (on IT
equipped gel strings)
Fan Stopped
Accepts power and data on one cable
4 pin XLR connector for power and data
Gel Temperature Sensor
High Motor Current
4 pin XLR connector output for daisy chaining units
Gel string Broken Alert
Low Voltage Alert
Reverse polarity protection, unit will not be
damaged by RAM II style PSUs
Gel string Replacement
Period Reached
Gel Wear Counter
Fan speed may be remote controlled or set
to one of three options
“Time to Destination” option for gel movement
Made in USA
Specifications–4-inch, 7.5-inch, 12-inch
Color Changers
Dimensions & Weights
7.5-inch Model 87200
4-inch Model 84560
4.20"/107mm
4.58"/116mm
4.55"/116mm
3.78"/96mm
3.47"/
88mm
11.43"/290mm
7.50"/191mm
9.78"/248mm
5.00"/127mm
5.00"/127mm
7.50"/191mm
11.84"/301mm
10.69"/271mm
3.65"/93mm
12.99"/330mm
4.18"/106mm
2.99"/
76mm
Weight: 7.0 lbs./3.2kg without mounting plate
Front Door: 10.0” accessory holder
Weight: 6.0 lbs./2.6kg without mounting plate
Front Door: 6.25” accessory holder
Ordering Information
12-inch Model 812210
5.16"/131mm
5.46"/139mm
4.79"/122mm
19.40"/493mm
3.15"/
80mm
Weight: 10.5 lbs./4.8kg without mounting plate
Front Door: 14.0” accessory holder
16.10"/409mm
12.00"/305mm
12.00"/305mm
CXI IT Color Changer
Model
Description
84560
4-inch color changer
87200
7.5-inch color changer
812210
12-inch color changer
PS-SERIES Power Supply
820150
150W power Supply
820300
300W power Supply
820600
600W power Supply
CXI Accessories
Power/Data Cable (XX=Length)*
7042-XX
CXI IT Gelstrings
84569–Front
4-inch gelstring
84569–Back
4-inch gelstring
87169–Front
7.5-inch gelstring
87169–Back
7.5-inch gelstring
812219–Front
12.0-inch gelstring
812219–Back
12.0-inch gelstring
CXI IT Mounting Plate INCLUDED. To specify size, see website.
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications–Lrg. Frmt., Eight Light, MultiPAR
Color Changers
Power/Data
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
General
A component of the Wybron Infotrace Series
of Products
Two individual gel strings with multiple densities
of CMY for exceptional color integration
432 distinct colors available
User definable end frames
Color LCD display and 4 membrane buttons
for user settings
Front mounting plate for additional accessories
Color position /main address,
user selectable 1-512
Remote fan and/or Time to Destination addresses,
user selectable 1-512
Sub parameter addresses do not need to be
contiguous to main color position address
Parameters and features selectable
with Infotrace/RDM:
Base Address
Sub Parameter Address (Fan Remote / Time
to Destination)
Self Test Mode
Wide selection of fixture mounting plates
Integrated stainless steel safety cable
Infotrace/RDM feedback information
.063” aluminum sheet metal construction
Aperture Light Sensor
Voltage Sensor
Multiple operating personalities for different
performance characteristics
Unit Temperature Sensor
Fan RPM
Pass Through Current
Roller Stuck
Hours Since Last
Maintenance
Init Fail
Gel Colors (on IT
equipped gel strings)
Fan Stopped
Accepts power and data on one cable
4 pin XLR connector for power and data
Gel Temperature Sensor
High Motor Current
4 pin XLR connector output for daisy chaining units
Gel string Broken Alert
Low Voltage Alert
Reverse polarity protection, unit will not be
damaged by RAM II style PSUs
Gel string Replacement
Period Reached
Gel Wear Counter
Fan speed may be remote controlled or set
to one of three options
“Time to Destination” option for gel movement
Made in USA
Specifications–Lrg. Frmt., Eight Light, MultiPAR
Color Changers
Dimensions & Weights
Large Format Model 816050
Eight Light Model 816130
5.46"/139mm
5.58"/142mm
7.59"/
193mm
Weight: 22.5 lbs./10.2kg without mounting plate
5.15"/131mm
21.83"/555mm
14.25"/362mm
25.28"/642mm
15.00"/381mm
15.00"/381mm
25.30"/643mm
23.96"/609mm
24.27"/616mm
25.30"/643mm
5.15"/131mm
26.40"/670mm
6.36"/
161mm
Weight: 23.5 lbs./10.8kg without mounting plate
MultiPAR Model 87240
Ordering Information
7.04"/179mm
5.55"/141mm
4.05"/103mm
14.77"/375mm
12.33"/313mm
28.48"/723mm
24.34"/618mm
6.45"/164mm
CXI IT Color Changer
Model
Description
816050
Large Format color changer
816130
Eight Light color changer
87240
MultiPAR color changer
PS-SERIES Power Supply
820150
150W power Supply
820300
300W power Supply
820600
600W power Supply
CXI Accessories
Power/Data Cable (XX=Length)*
7042-XX
CXI IT Gelstrings
Large Format gelstring
816059–Front
Large Format gelstring
816059–Back
Eight Light gelstring
816139–Front
Eight Light gelstring
816139–Back
MultiPAR gelstring
87249–Front
MultiPAR gelstring
87249–Back
CXI IT Mounting Plate INCLUDED. To specify size, see website.
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
3.14"/
80mm
Weight: 14.0 lbs./6.4kg without mounting plate
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
CONTROL
•Simple user interface
•8 or 16 bit control mode for
precise color mixing
•Smooth fading with 3000:1
dimming ratio and instant
bumps
•RGB master mode allows you
to pick a color using RGB and
fade the selected color using
the slider. Dimming is consistent
with incandescent fixtures
•RGBW mode allows you to
use all four elements to select
exactly the color you want
•Strobe mode, with frequency
and duty cycle control; also
control color cycling
MECHANICAL
•Quiet, advanced thermal management system for longer life
•Rugged and compact aluminum
construction
•Mounting hardware allows units
to be grouped in lines or arrays
•Integral safety cable mount on
fixture
•Compact, elegant design allows
hanging on 12” centers
SPECIFICATIONS
•High-speed mode for flicker-
free high-shutter speed video or
Weight: 14.9 lb
film lighting
Dimensions:
•Standalone mode
8.0”H x 9.0”W x 14.0”L
•Master-slave capability
Power Consumption: 200W
•Variable color temperature
Peak Field Lumens: 4590
control, from 2800k to 7000k
Introducing the Cygnus MF200, representing a leap forward
for LED technology. The MF200 is astoundingly bright—as
much as five times as bright as competing fixtures, and is also
one of the one of the only luminaires in the world that uses integrated
RGBW LEDs for in-lens color mixing—meaning that the color you see
on the fixture is the color you’ll see on the stage. It’s also unbelievably efficient, which translates to marked energy savings, all without
dimmers, gels, lamp replacement or color changers. This means more
room on your rig and fewer lights to oversee. And with its excellent
color rendering—as high as 92 CRI—and tighter beam angle, Cygnus
MF200 is proof positive that Wybron continues to advance the art of
lighting.
TEL 800.624.0146 WEB www.wybron.com
OPTICS
•Multiple lens angles, rotatable,
diffusers available
•Integrated RGBW elements for
minimal rainbow shadows
•Very bright, extremely efficient
so fewer fixtures are needed
•Front mounting mechanism for
additional accessories
•RGBW elements allow for
efficiency and high-accuracy
whites
Lamp Life: 60,000 hours
Peak CRI: 92
Connectors: 5-pin XLR In and Out
for DMX/RDM control
Power Supply: 100-240 VAC
50-60Hz universal power supply
CONTROL
•Simple user interface
•8 or 16 bit control mode for
precise color mixing
•Smooth fading with 3000:1
dimming ratio and instant
bumps
•RGB master mode allows you
to pick a color using RGB and
fade the selected color using
the slider. Dimming is consistent
with incandescent fixtures
•RGBW mode allows you to
use all four elements to select
exactly the color you want
•Strobe mode, with frequency
and duty cycle control; also
control color cycling
MECHANICAL
•Quiet, advanced thermal management system for longer life
•Rugged and compact aluminum
construction
•Mounting hardware allows units
to be grouped in lines or arrays
•Integral safety cable mount on
fixture
•Compact, elegant design allows
hanging on 12” centers
SPECIFICATIONS
•High-speed mode for flicker-
free high-shutter speed video or
Weight: 14.9 lb
film lighting
Dimensions:
•Standalone mode
8.0”H x 9.0”W x 14.0”L
•Master-slave capability
Power Consumption: 200W
•Variable color temperature
Peak Field Lumens: 4590
control, from 2800k to 7000k
Beam Angle: 13°
OPTICS
Field Angle 25°
•Proprietary lens design
Lamp Life: 60,000 hours
Introducing the Cygnus VN200, representing a leap forward for LED
technology. The VN200, one of the newest additions to Wybron’s Cygnus
family, channels all of the astounding brightness of Cygnus into a tight, extrapowerful beam. It’s also one of the only luminaires in the world that uses integrated
RGBW LEDs for in-lens color mixing—meaning that the color you see on the fixture
is the color you’ll see on the stage. It’s also unbelievably efficient, which translates
to marked energy savings, all without dimmers, gels, lamp replacement or color
changers. This means more room on your rig and fewer lights to oversee. And with
its excellent color rendering—as high as 92 CRI—and tighter beam angle, Cygnus
VN200 is proof positive that Wybron continues to advance the art of lighting.
•Multiple lens angles, rotatable,
diffusers available
•Integrated RGBW elements for
minimal rainbow shadows
•Very bright, extremely efficient
so fewer fixtures are needed
•Front mounting mechanism for
additional accessories
•RGBW elements allow for
efficiency and high-accuracy
whites
Peak CRI: 92
Connectors: 5-pin XLR In and Out
for DMX/RDM control
Power Supply: 100-240 VAC
50-60Hz universal power supply
CONTROL
•Simple user interface
•8 or 16 bit control mode for
precise color mixing
•Smooth fading with 3000:1
dimming ratio and instant
bumps
•RGB master mode allows you
to pick a color using RGB and
fade the selected color using
the slider. Dimming is consistent
with incandescent fixtures
•RGBW mode allows you to
use all four elements to select
exactly the color you want
•Strobe mode, with frequency
and duty cycle control; also
control color cycling
MECHANICAL
•Quiet, advanced thermal management system for longer life
•Rugged and compact aluminum
construction
•Mounting hardware allows units
to be grouped in lines or arrays
•Integral safety cable mount on
fixture
•Compact, elegant design allows
hanging on 12” centers
SPECIFICATIONS
•High-speed mode for flicker-
free high-shutter speed video or
Weight: 8.9 lb
film lighting
Dimensions:
•Standalone mode
6.5”H x 6.25”W x 10.0”L
•Master-slave capability
Input Power: 105 watts peak
•Variable color temperature
Peak Field Lumens: 2250
control, from 2800k to 7000k
Beam Angle: 13°
OPTICS
Field Angle 25°
•Proprietary lens design
Lamp Life: 60,000 hours
Introducing the Cygnus VN100, representing a leap forward for LED
technology. The VN100, one of the newest additions to Wybron’s Cygnus
family, channels all of the astounding brightness of Cygnus into a tight, extrapowerful beam. It’s also one of the only luminaires in the world that uses integrated
RGBW LEDs for in-lens color mixing—meaning that the color you see on the fixture
is the color you’ll see on the stage. It’s also unbelievably efficient, which translates
to marked energy savings, all without dimmers, gels, lamp replacement or color
changers. This means more room on your rig and fewer lights to oversee. And with
its excellent color rendering—as high as 92 CRI—and tighter beam angle, Cygnus
VN100 is proof positive that Wybron continues to advance the art of lighting.
•Multiple lens angles, rotatable,
diffusers available
•Integrated RGBW elements for
minimal rainbow shadows
•Very bright, extremely efficient
so fewer fixtures are needed
•Front mounting mechanism for
additional accessories
•RGBW elements allow for
efficiency and high-accuracy
whites
Peak CRI: 92
Connectors: 5-pin XLR In and Out
for DMX/RDM control
Power Supply: 100-240 VAC
50-60Hz universal power supply
IRIS
Specifications- 1K, 2K & 24-inch
D ow s e r s
Power/Data
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Local control mode via keypad or remote pendant
General
A component of the Wybron Infotrace Series
of Products
Color LCD display and 4 membrane buttons
for user settings
Wide selection of fixture mounting plates
Integrated stainless steel safety cable
Fin position /main address, user selectable 1-512
Parameters and features selectable
with Infotrace/RDM:
Base Address
Operating Personality
Firmware Upgrade
.063” aluminum sheet metal construction
Multiple operating personalities for different
performance characteristics
Extremely accurate aperture-like dowsing
mechanism for smooth uniform light reduction
with no light loss
Teflon coated aperture blades are .028 thick
304 stainless steel
Aperture Speed-Fast cut: 1K-.98 seconds
2K- 1.03 seconds
Infotrace/RDM feedback information
Aperture Light Sensor
Unit Temperature Sensor
Pass Through Current
Hours Since Last Maintenance
Fan Stopped
Fan RPM
Low fan speed for quiet operation
High Motor Current
Accessory "ears" for color changers, diffusion
panels, etc. are standard.
Voltage Sensor
Accepts power and data on one cable
4 pin XLR connector for power and data
4 pin XLR connector output for daisy chaining units
Reverse polarity protection, unit will not be
damaged by RAM II style PSUs
Made in the USA
Init Fail
Low Voltage Alert
IRIS
Specifications- 1K, 2K & 24-inch
D ow s e r s
Dimensions & Weights
1K ECLIPSE IT IRIS Model 87250
24-inch ECLIPSE IT IRIS Model 823020
34.80"/884mm
14
.4
7"
/3
68
m
m
10.95"/278mm
32.33"/821mm
14.11"/358mm
24.00"/610mm
2.69"/68mm
14.11"/358mm
m
13.64"/346mm
8m
36
"/
0
.5
4.45"/
113mm
14
7.50"/191mm
14.11"/358mm
36.22"/920mm
0.76"/19mm
6.72"/171mm
7.50"/191mm
3.73"/95mm
10.88"/276mm
7.87"/200mm
4.99"/127mm
Weight: 4.60 lbs./2.09kg without mounting plate
Front Door: 6.25” accessory holder
16
m
.4
m
7"
18
/4
/4
18
7"
m
.4
m
16
11.28"/287mm
2K ECLIPSE IT IRIS Model 812020
11.75"/298mm
Weight: 31.96 lbs./14.5kg without mounting plate
20.55"/522mm
0.88"/22mm
12.00"/305mm
12.00"/305mm
Ordering Information
17.35"441mm
17.88"/454mm
3.95"/100mm
4.83"/123mm
2.99"/
76mm
Weight: 8.40 lbs./3.81kg without mounting plate
Front Door: 14.0” accessory holder
3.20"/81mm
ECLIPSE IT IRIS Dowser
Model
Description
87250
1K Dowser
812020
2K Dowser
823020
Large Format Dowser
PS-SERIES Power Supply
820150
150W power Supply
820300
300W power Supply
820600
600W power Supply
ECLIPSE IT IRIS Accessories
Power/Data Cable (XX=Length)*
7042-XX
ECLIPSE IT IRIS Mounting Plate INCLUDED. To specify size, see website.
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications-1k, 2k & Lrg. Frmt.
D ow s e r s
SHUTTER
Power/Data
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Local control mode via keypad or remote pendant
Fin position /main address, user selectable 1-512
General
A component of the Wybron Infotrace Series
of Products
Color LCD display and 4 membrane buttons
for user settings
Wide selection of fixture mounting plates
Parameters and features selectable
with Infotrace/RDM:
Base Address
Operating personality
Firmware Upgrade
Integrated stainless steel safety cable
.063” aluminum sheet metal construction
Multiple operating personalities for different
performance characteristics
Alternating vertical finshutter movement for
smooth uniform light reduction
Shutter Speed-Cross-fade Up to 60 seconds
Fast cut: 200 milliseconds (five times a second)
Strobe rate: 10CPS - 100ms (at 60% amplitude)
Infotrace/RDM feedback information
Aperture Light Sensor
Unit Temperature Sensor
Pass Through Current
Hours Since Last Maintenance
Fan Stopped
Low fan speed for quiet operation
Fan RPM
Accessory "ears" for color changers, diffusion
panels, etc. are standard.
High Motor Current
Accepts power and data on one cable
Init Fail
4 pin XLR connector for power and data
Low Voltage Alert
4 pin XLR connector output for daisy chaining units
Reverse polarity protection, unit will not be
damaged by RAM II style PSUs
Made in the USA
Voltage Sensor
SHUTTER
Specifications-1k, 2k & Lrg. Frmt.
D ow s e r s
Dimensions & Weights
1K ECLIPSE IT Model 89001
Lrg. Frmt. ECLIPSE IT Model 817000
3.12"/79mm
2.85"/72mm
2.38"/60mm
16.00"/406mm
16.00"/406mm
12.33"/313mm
15.47"/393mm
8.75"/222mm
8.00"/203mm
23.47"/596mm
2.17"/55mm
10.95"/278mm
2.18"/55mm
18.95"/481mm
8.87"/203mm
5.48"/
139mm
5.48"/
139mm
Weight: 5.52 lbs./2.51kg without mounting plate
Front Door: 6.25” accessory holder
Weight: 6.16 lbs./2.79kg without mounting plate
2K ECLIPSE IT Model 811010
2.73"/69mm
2.46"/62mm
2.18"/55mm
12.95"/329mm
Ordering Information
17.47"/444mm
11.00"/279mm
10.00"/254mm
5.35"/
136mm
ECLIPSE IT Dowser
Model
Description
89001
1K Dowser
811010
2K Dowser
817000
5K Dowser
PS-SERIES Power Supply
820150
150W power Supply
820300
300W power Supply
820600
600W power Supply
ECLIPSE IT Accessories
Power/Data Cable (XX=Length)*
7042-XX
ECLIPSE IT Mounting Plate INCLUDED. To specify size, see website.
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
Weight: 5.62 lbs./2.55kg without mounting plate
Front Door: 14.0” accessory holder
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications-4-inch, 7.5-inch
Color Changers
Power/Data
Receives 24v DC and DMX from Wybron
PS Series Power Supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control
Uses DMX512-A Protocol
General
Designed to be an entry level color changer
Fits the most common wash and ellipssoidal fixtures
16 individual gel frames on 4” (Source Four)
& 7.0” models
Features Wbron’s Autoload system for easy
gelstring loading
Wide selection of fixture mounting plates
Integrated stainless steel safety cable
.063” aluminum sheet metal construction
Accepts power and data on one cable
4 pin XLR connector for power and data
4 pin XLR connector output for daisy chaining units
Made in the USA
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications-4-inch, 7-inch
Color Changers
Dimensions & Weights
Ordering Information
4-inch Model 4540
FORERUNNER Color Changers
Model
Description
4540
4-inch color changer
7140
7-inch color changer
PS-SERIES Power Supply
820150
150W power Supply
820300
300W power Supply
820600
600W power Supply
FORERUNNER Accessories
Power/Data Cable (XX=Length)*
7042-XX
FORERUNNER Gelstrings**
4549–XX
4-inch gelstring (XX=number of frames up to 16)
7149–XX
7.0-inch gelstring (XX=number of frames up to 16)
FORERUNNER Mounting Plate INCLUDED. To specify size, see website.
3.25"/83mm
2.65"/67mm
2.99"/76mm
9.86"/248mm
10.13"/257mm
5.25"/133mm
5.25"/133mm
2.59"/
66mm
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
** See COLOREXPRESS Gelstrings for available colors
Weight: 3.0 lbs./1.361kg without mounting plate
Front Door: 6.25” accessory holder
7-inch Model 7140
3.34"/85mm
2.66"/68mm
3.0"/76mm
11.72"/298mm
11.07"/281mm
7.0"/176mm
7.0"/176mm
2.59"/
66mm
Weight: 3.38 lbs./1.53kg without mounting plate
Front Door: 10.0” accessory holder
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications
R D M G a t ewa y
Control Outputs
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Parameters and features selectable
with Infotrace/RDM:
RDM Gateway
Device Label
Firmware Upgrade
General
Infotrace/RDM feedback information
A component of the Wybron Infotrace Series
of Products
Controls any DMX/RDM device as well as the
following Wybron products:
• NEXERA LX Luminaires
Type of Device
Device Drop Warning
Dimensions & Weights
• CXI IT Color Changers
• COLORAM IT Color Changers
INFOGATE IT Model 4210
• ECLIPSE IT SHUTTER/ ECLIPSE IT IRIS Dowsers
Front & rear LEDs indicating signal and power
Integrated stainless steel safety cable
Truss or rack mountable; free standing
.063” aluminum sheet metal construction
RJ-45 Ethernet connector for input
Two 5 pin DMX connectors for input
9.78"/248mm
8.05"/204mm
Two 5 pin XLR connector for 2 DMX universes of output
3.32"/84mm
Made in USA
Power/Data*
Accepts all standard voltages worldwide
(100-132 VAC 50/60 Hz and 170-240 VAC 50/60 Hz)
Weight: 2.94 lbs./1.33kg
Sends/passes DXM/RDM
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
3.71"/94mm
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
Ordering Information
INFOGATE IT RDM Gateway
Model
4210
Description
RDM Gateway/Hub
*Not Compatible with Ram II Power Supplies
Control Inputs
DMX512-A inputs
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications–7.5-inch Mariner
Color Changers
Power/Data
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
General
A component of the Wybron Infotrace Series
of Products
Color position /main address,
user selectable 1-512
Remote fan and/or Time to Destination addresses,
user selectable 1-512
Sub parameter addresses do not need to be
contiguous to main color position address
Outdoor-rated (IP 65), weather-resistant models
Two individual gel strings with multiple densities
of CMY for exceptional color integration
432 distinct colors available
User definable end frames
Color LCD display and 4 membrane buttons
for user settings
Parameters and features selectable
with Infotrace/RDM:
Base Address
Sub Parameter Address (Fan Remote / Time
to Destination)
Self Test Mode
Front mounting plate for additional accessories
Wide selection of fixture mounting plates
Infotrace/RDM feedback information
Integrated stainless steel safety cable
Aperture Light Sensor
Voltage Sensor
.063” aluminum sheet metal construction
Unit Temperature Sensor
Fan RPM
Multiple operating personalities for different
performance characteristics
Pass Through Current
Roller Stuck
Hours Since Last
Maintenance
Init Fail
Gel Colors (on IT
equipped gel strings)
Fan Stopped
“Time to Destination” option for gel movement
Accepts power and data on one cable
Gel Temperature Sensor
High Motor Current
4 pin XLR connector for power and data
Gel string Broken Alert
Low Voltage Alert
4 pin XLR connector output for daisy chaining units
Gel string Replacement
Period Reached
Gel Wear Counter
Fan speed may be remote controlled or set
to one of three options
Reverse polarity protection, unit will not be
damaged by RAM II style PSUs
Made in USA
Specifications–7.5-inch Mariner
Color Changers
Dimensions & Weights
7.5”Mariner Model 87220
4.79"/122mm
4.42"/112mm
3.95"/100mm
15.21"/386mm
11.90"/302mm
7.25"/184mm
7.38"/187mm
3.58"/
91mm
Weight: 7.0 lbs./3.2kg without mounting plate
Ordering Information
CXI IT Color Changer
Model
Description
87220
7.5-inch Mariner color changer
PS-SERIES Power Supply
820150
150W power Supply
820300
300W power Supply
820600
600W power Supply
CXI Accessories
Power/Data Cable (XX=Length)*
7042-XX
CXI IT Gelstrings
87179–Front
7.5-inch Mariner gelstring
87179–Back
7.5-inch Mariner gelstring
CXI IT Mounting Plate INCLUDED. To specify size, see website.
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications
2 - Po r t N o d e
Control Outputs
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Parameters and features selectable
with Infotrace/RDM:
Device Label
Firmware Upgrade
General
Infotrace/RDM feedback information
A component of the Wybron Infotrace Series
of Products
Controls any DMX/RDM device as well as the
following Wybron products:
Type of Device
Device Drop Warning
• NEXERA LX Luminaires
Specifications
• CXI IT Color Changers
• COLORAM IT Color Changers
• ECLIPSE IT SHUTTER/ ECLIPSE IT IRIS Dowsers
Front & rear LEDs indicating signal and power
Dimensions & Weights
NET IT Model 20620
Integrated stainless steel safety cable
Truss or rack mountable; free standing
.063” aluminum sheet metal construction
RJ-45 ethernet connector for input
Two 5 pin XLR connector for 2 DMX univeres of output
Made in USA
9.31"/236mm
Power/Data*
8.66"/220mm
2.56"/65mm
Accepts all standard voltages worldwide
(100-132 VAC 50/60 Hz and 170-240 VAC 50/60 Hz
Sends/passes DXM/RDM
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
2.95"/75mm
Weight: 2.94 lbs./1.33kg
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Ordering Information
NET IT 2-Port Node
Model
20620
Description
2-Port Node
Control Inputs
Artnet over ethernet
ANSI E1.31-Interoperable ethernet transport
for DMX 512A
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications
2 - Po r t N o d e/
Powe r S u p p l y
Power/Data*
Accepts all standard voltages worldwide
(100-132 VAC 50/60 Hz and 170-240 VAC 50/60 Hz
Sends/passes 24v DC and DXM/RDM
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control Inputs
General
A component of the Wybron Infotrace Series
of Products
Control and power for the following Wybron products:
Artnet over Ethernet
ANSI E1.31-Interoperable ethernet transport
for DMX 512A
Control Outputs
• NEXERA LX Luminaires
Uses DMX512-A Protocol
• CXI IT Color Changers
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
• COLORAM IT Color Changers
• ECLIPSE IT SHUTTER/ECLIPSE IT IRIS Dowsers
• FORERUNNER Color Changers
Front & rear LEDs indicating signal and power
Integrated stainless steel safety cable
Truss or rack mountable; free standing
Parameters and features selectable
with Infotrace/RDM:
Device Label
Firmware Upgrade
.063” aluminum sheet metal construction
RJ-45 connector for ethernet input
Infotrace/RDM feedback information
Six 4 pin XLR connector for power and data
Type of Device
Two 5 pin XLR connector for 2 DMX universes of output
Voltage Output Sensor
Made in USA
Device Drop Warning
Specifications
2 - Po r t N o d e/
Powe r S u p p l y
Dimensions & Weights
Equipment Compatibility**
NET IT PS-600 Model 20610
The following is a chart of compatibility and capacity of
the NET IT PS-600 2-port Node/Power Supply and
the companion devices.
14.00"/356mm
2-port Node/600W Power Supply
NET IT PS-600
Model
20610
Output Power
600W
Maximum devices per Power Supply
7.98"/203mm
14.00"/356mm
4.41"/112mm
7.98"/203mm
Description
Model
Head Ft.
CXI IT 7.5”
87200
1500
24
CXI IT 4”
84560
1500
24
CXI IT Lg Format
816050
750
9
CXI IT 12”
812210
500
8
CXI IT 8-light
816130
750
12
CXI IT Mariner
87220
1500
24
CXI IT MultiPar
87240
1000
18
1500
32
NEXERA LX (CDM)
2560LX, 2570LX,
2640LX
2580LX, 2600LX,
2650LX
1500
24
COLORAM IT 7.5”
87110
1500
24
COLORAM IT 4”
84520
1500
24
COLORAM IT 10”
810100
1000
16
COLORAM IT Lg Frmt
816090
1000
24
4.80"/122mm
NEXERA LX (tungsten)
Weight: 7.90 lbs./3.58kg
COLORAM IT 15”
815010
1000
24
COLORAM IT 8-light
816080
1000
20
AQUARAM IT 7.5”
87080
1000
20
AQUARAM IT Lg Frmt
85000
1000
24
ECLIPSE IT SHUTTER 1K
89001
1500
32
ECLIPSE IT SHUTTER 2K
811010
1500
32
817000
1500
32
87250
1500
24
ECLIPSE IT IRIS 2K
812020
1500
24
ECLIPSE IT IRIS 24”
823020
750
12
FORERUNNER 4”
4540
n/a
64
FORERUNNER 7”
7140
n/a
64
ECLIPSE IT SHUTTER
Lg
Frmt
ECLIPSE IT IRIS 1K
1
Some watts/unit numbers are rounded up/down ** The above information
assumes devices are on different channels and all move simultaneously
Ordering Information
NET IT PS-600 Power Supply
Model
Description
20610
2-port Node 600W Power Supply
NET IT PS-600 Power Supply Accessories
Power/Data Cable (XX=Length)*
7042-XX
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
TM
Specifications–19°-26° Profile–CDM Source
Luminaire Series
Power/Data
Ballast voltage 120/277 VAC
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Cable: 36" Teflon coated leads encased in heat
resistant black fiberglass sleeve
Control
Uses DMX512-A Protocol
General
A component of the Wybron Infotrace Series
of Products
Integral Color Module provides a nearly infinite
color palette plus mechanical dimming via
4-channel DMX control
Gate Assembly: Four 20 gauge stainless steel
shutters operating in three independent planes,
with “M” size Gobo and Iris slot
150 watt compact, CDM light source
Integral electronic ballast
Precise, tool-free lamp optimization
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Color position /main address,
user selectable 1-512
Control input and daisy chain via 4 pin XLR
Parameters and features selectable
with Infotrace/RDM:
Base Address
Firmware Upgrade
Optical
Standard 6.25-inch accessory holders
Integral safety cable mount on fixture
Computer optimized optics
Color LCD display for user settings
Reflector: Dichroic coated borosilicate cold mirror
Front mounting plate for additional accessories
Lenses: High temperature borosilicate
Integrated stainless steel safety cable
Precision milled aluminum construction
Compact, elegant design allows hanging on
12" centers
Accepts power and data on one cable
4 pin XLR connector for power and data
4 pin XLR connector output for daisy chaining units
Extremely quiet, convection cooled, no fans
High impact, thermally insulating handles
Yoke: Flat steel with two mounting positions
UL Approved
Made in the USA
Accessories
Includes malleable iron pipe clamp
Optionally available with installed Stage pin,
Twist lock & Edison connectors
Black gobo holder
DX
TM
Specifications–19°-26° Profile–CDM Source
DX
Luminaire Series
Photometrics–150W CDM Lamp @ 115V
Dimensions & Weights
19°-26° Profile (CDM) Model 2650LX
Narrow Focus
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
19°
73,750 (Cd)
4150
27.7 LPW
29.6%
50
75
100
Field Diameter (ft)
8.4
16.8
25.3
33.7
Illumination (fc)
118
30
13
7
15°
19°
6.3"/160.0mm
11.9"/302mm
22.6"/573mm
9.7"/247mm
20.9"/532mm
Field Angle
25
Beam Angle
Distance (ft)
12.4"/314mm
8.3"/210mm
Wide Focus
14.4"/367mm
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
26°
48,825 (Cd)
4470
29.8 LPW
31.9%
30
Field Diameter (ft)
6.9
13.8
Illumination (fc)
217
54
20°
45
60
20.8
27.7
24
14
26°
Specifications as of 2/1/06 and may be subject to change
Lamp Data
Socket: G12 style, rated to 350º C
Tool-free precision lamp alignment
Lamp Watts(nominal)
150
Rated Lumens
14,000
Rated Hours
10,000
Color Temp
3000K
Color Rendering Index
85
Efficacy
93
13.9"/352mm
6.6"/168mm
Weight: Weight: 24.9 lbs. (11.3 kg)
Accessory holder: 6.25”
Field Angle
15
Beam Angle
Distance (ft)
9.3"/235mm
Ordering Information
NEXERA Luminaire
Model
Description
2650LX
NEXERA 19°-26° Profile (CDM)
NEXERA Accessories
703-03-09BK
Safety Cable
258-01-01P
Black Gobo Holder
287391
Lamp, GLC 115V
294322
Lamp, GLA 115V
363721
Lamp, GKV 230V
363739
Lamp, GLB 230V
7042-XX
Power/Data Cable (XX=Length)*
NEXERA Power Supply (PS-Series)
20600
Power Supply for 24 NEXERA Luminaires
20300
Power Supply for 12 NEXERA Luminaires
20150
Power Supply for 6 NEXERA Luminaires
NEXERA AC Power Connectors
PP2PGMC
Stage Pin Connector
LEV2311BK
Twist Lock Connector
HBL5266C
Edison Connector
*Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
TM
Specifications–19°-26° Profile–Tungsten Source
Luminaire Series
Power/Data
Lamp line voltage 120/240 VAC
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Cable: 36" Teflon coated leads encased in heat
resistant black fiberglass sleeve
Control
Uses DMX512-A Protocol
General
A component of the Wybron Infotrace Series
of Products
Integral Color Module provides a nearly infinite
color palette via 3-channel DMX control
Gate Assembly: Four 20 gauge stainless steel
shutters operating in three independent planes,
with “M” size Gobo and Iris slot
575 watt compact tungsten, high CRI source
(GLC/GLA)
Precise, tool-free lamp optimization
Integral safety cable mount on fixture
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Color position /main address,
user selectable 1-512
Control input and daisy chain via 4 pin XLR
Parameters and features selectable
with Infotrace/RDM:
Base Address
Firmware Upgrade
Optical
Color LCD display for user settings
Front mounting plate for additional accessories
Precision milled .063” aluminum construction
Integrated stainless steel safety cable
.063” aluminum sheet metal construction
Compact, elegant design allows hanging on
12" centers
Zoom adjust detents at 19º and 26º for quick setup
Computer optimized optics
Reflector: Dichroic coated borosilicate cold mirror
Lenses: High temperature borosilicate
Accessories
Includes malleable iron pipe clamp
Accepts power and data on one cable
Optionally available with installed Stage pin,
Twist lock & Edison connectors
4 pin XLR connector for power and data
Black gobo holder
4 pin XLR connector output for daisy chaining units
Extremely quiet, convection cooled, no fans
High impact, thermally insulating handles
Yoke: Flat steel with two mounting positions
UL Approved
Made in the USA
DX
TM
Specifications–19°-26° Profile–Tungsten Source
DX
Luminaire Series
Photometrics–Tungsten 575W GLC @115V
Dimensions & Weights
19°-26° Profile (Tungsten) Model 2640LX
Narrow Focus
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
19°
154,375 (Cd)
7030
12.2 LPW
45.3%
50
75
Field Diameter (ft)
8.3
16.7
25.0
33.3
Illumination (fc)
247
62
27
15
14°
19°
6.3"/160.0mm
100
11.9"/302mm
22.6"/573mm
9.7"/247mm
20.9"/532mm
Field Angle
25
Beam Angle
Distance (ft)
12.4"/314mm
8.3"/210mm
14.4"/367mm
Wide Focus
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
26°
105,625 (Cd)
7215
12.5 LPW
46.5%
50
75
100
Field Diameter (ft)
11.1
22.2
33.3
44.3
Illumination (fc)
169
42
19
11
17°
26°
Weight: Weight: 24.9 lbs. (11.3 kg)
Accessory holder: 6.25”
Specifications as of 2/1/06 and may be subject to change
Lamp Data
ANSI
Code
13.9"/352mm
6.6"/168mm
Field Angle
25
Beam Angle
Distance (ft)
9.3"/235mm
Watts
Rated
VAC
Color
Temp
Rated
Hours
Rated
Lumens
GLC
575
115
3200
400
15500
GLA
575
115
3100
1500
13500
GKV
600
230
3200
400
15000
GLB
600
230
3100
1500
13000
Ordering Information
NEXERA Luminaire
Model
Description
2640LX
NEXERA 19°-26° Profile (Tungsten)
NEXERA Accessories
703-03-09BK
Safety Cable
258-01-01P
Black Gobo Holder
287391
Lamp, GLC 115V
294322
Lamp, GLA 115V
363721
Lamp, GKV 230V
363739
Lamp, GLB 230V
7042-XX
Power/Data Cable (XX=Length)*
NEXERA Power Supply (PS-Series)
20600
Power Supply for 24 NEXERA Luminaires
20300
Power Supply for 12 NEXERA Luminaires
20150
Power Supply for 6 NEXERA Luminaires
NEXERA AC Power Connectors
PP2PGMC
Stage Pin Connector
LEV2311BK
Twist Lock Connector
HBL5266C
Edison Connector
*Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
Socket: G9.5 style, rated to 350º C
Tool-free precision lamp alignment
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
TM
Specifications–25°-40° Profile–CDM Source
Luminaire Series
Power/Data
Ballast voltage 120/277 VAC
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Cable: 36" Teflon coated leads encased in heat
resistant black fiberglass sleeve
Control
Uses DMX512-A Protocol
General
A component of the Wybron Infotrace Series
of Products
Integral Color Module provides a nearly infinite
color palette plus mechanical dimming via
4-channel DMX control
Gate Assembly: Four 20 gauge stainless steel
shutters operating in three independent planes,
with “M” size Gobo and Iris slot
150 watt compact, CDM light source
Integral electronic ballast
Precise, tool-free lamp optimization
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Color position /main address,
user selectable 1-512
Control input and daisy chain via 4 pin XLR
Parameters and features selectable
with Infotrace/RDM:
Base Address
Firmware Upgrade
Optical
Standard 6.25-inch accessory holders
Integral safety cable mount on fixture
Computer optimized optics
Color LCD display for user settings
Reflector: Dichroic coated borosilicate cold mirror
Front mounting plate for additional accessories
Lenses: High temperature borosilicate
Integrated stainless steel safety cable
Precision milled aluminum construction
Accessories
Compact, elegant design allows hanging on
12" centers
Includes malleable iron pipe clamp
Accepts power and data on one cable
Optionally available with installed Stage pin,
Twist lock & Edison connectors
4 pin XLR connector for power and data
4 pin XLR connector output for daisy chaining units
Extremely quiet, convection cooled, no fans
High impact, thermally insulating handles
Yoke: Flat steel with two mounting positions
UL Approved
Made in the USA
Black gobo holder
DX
TM
Specifications–25°-40° Profile–Tungsten Source
DX
Luminaire Series
Photometrics–Tungsten 575W GLC @115V
Dimensions & Weights
25°-40° Profile (Tungsten) Model 2570LX
Narrow Focus
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
19°
154,375 (Cd)
7030
12.2 LPW
45.3%
Distance (ft)
25
50
75
Field Diameter (ft)
8.3
16.7
25.0
33.3
Illumination (fc)
247
62
27
15
6.3"/160.0mm
100
20.7"/525mm
19°
Field Angle
14°
Beam Angle
11.9"/302mm
9.7"/247mm
19.1"/484mm
12.4"/314mm
8.3"/210mm
Wide Focus
14.4"/367mm
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
26°
105,625 (Cd)
7215
12.5 LPW
46.5%
25
50
75
100
11.1
22.2
33.3
44.3
Illumination (fc)
169
42
19
11
26°
Beam Angle
Field Diameter (ft)
17°
13.9"/352mm
6.6"/168mm
Weight: Weight: 24.9 lbs. (11.3 kg)
Accessory holder: 6.25”
Field Angle
Distance (ft)
Specifications as of 2/1/06 and may be subject to change
Lamp Data
ANSI
Code
9.3"/235mm
Watts
Rated
VAC
Color
Temp
Rated
Hours
Rated
Lumens
GLC
575
115
3200
400
15500
GLA
575
115
3100
1500
13500
GKV
600
230
3200
400
15000
GLB
600
230
3100
1500
13000
Ordering Information
NEXERA Luminaire
Model
Description
2570LX
NEXERA Profile
NEXERA Accessories
703-03-09BK
Safety Cable
258-01-01P
Black Gobo Holder
287391
Lamp, GLC 115V
294322
Lamp, GLA 115V
363721
Lamp, GKV 230V
363739
Lamp, GLB 230V
7042-XX
Power/Data Cable (XX=Length)*
NEXERA Power Supply (PS-Series)
20600
Power Supply for 24 NEXERA Luminaires
20300
Power Supply for 12 NEXERA Luminaires
20150
Power Supply for 6 NEXERA Luminaires
NEXERA AC Power Connectors
PP2PGMC
Stage Pin Connector
LEV2311BK
Twist Lock Connector
HBL5266C
Edison Connector
*Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
Socket: G9.5 style, rated to 350º C
Tool-free precision lamp alignment
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
TM
Specifications–25°-40 Profile–Tungsten Source
Luminaire Series
Power/Data
Lamp line voltage 120/240 VAC
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Cable: 36" Teflon coated leads encased in heat
resistant black fiberglass sleeve
Control
Uses DMX512-A Protocol
General
A component of the Wybron Infotrace Series
of Products
Integral Color Module provides a nearly infinite
color palette via 3-channel DMX control
Gate Assembly: Four 20 gauge stainless steel
shutters operating in three independent planes,
with “M” size Gobo and Iris slot
575 watt compact tungsten, high CRI source
(GLC/GLA)
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Color position /main address,
user selectable 1-512
Control input and daisy chain via 4 pin XLR
Parameters and features selectable
with Infotrace/RDM:
Base Address
Firmware Upgrade
Precise, tool-free lamp optimization
Standard 6.25-inch accessory holders
Integral safety cable mount on fixture
Color LCD display for user settings
Front mounting plate for additional accessories
Precision milled aluminum construction
Integrated stainless steel safety cable
Compact, elegant design allows hanging on
12" centers
Zoom adjust detents at 25º and 40º for quick setup
Optical
Computer optimized optics
Reflector: Dichroic coated borosilicate cold mirror
Lenses: High temperature borosilicate
Accessories
Includes malleable iron pipe clamp
Accepts power and data on one cable
Optionally available with installed Stage pin,
Twist lock & Edison connectors
4 pin XLR connector for power and data
Black gobo holder
4 pin XLR connector output for daisy chaining units
Extremely quiet, convection cooled, no fans
High impact, thermally insulating handles
Yoke: Flat steel with two mounting positions
UL Approved
Made in USA
DX
TM
Specifications–25°-40° Profile–CDM Source
DX
Luminaire Series
Photometrics–150W CDM Lamp @ 115V
Dimensions & Weights
25°-40° Profile (CDM) Model 2600LX
Narrow Focus
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
28°
55,650 (Cd)
5150
34.3 LPW
36.8%
20
30
40
Field Diameter (ft)
4.9
9.8
14.7
19.6
Illumination (fc)
555
139
62
35
17°
28°
6.3"/160.0mm
11.9"/302mm
22.6"/573mm
9.7"/247mm
20.9"/532mm
Field Angle
10
Beam Angle
Distance (ft)
12.4"/314mm
8.3"/210mm
Wide Focus
14.4"/367mm
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
43°
26,690 (Cd)
5060
33.7 LPW
36.1%
15
20
25
Field Diameter (ft)
7.7
11.8
15.6
19.5
Illumination (fc)
266
119
67
43
20°
26°
Specifications as of 2/1/06 and may be subject to change
Lamp Data
Socket: G12 style, rated to 350º C
Tool-free precision lamp alignment
Lamp Watts(nominal)
150
Rated Lumens
14,000
Rated Hours
10,000
Color Temp
3000K
Color Rendering Index
85
Efficacy
93
13.9"/352mm
6.6"/168mm
Weight: Weight: 24.9 lbs. (11.3 kg)
Accessory holder: 6.25”
Field Angle
10
Beam Angle
Distance (ft)
9.3"/235mm
Ordering Information
NEXERA Luminaire
Model
Description
2600LX
NEXERA 25°-40° Profile (CDM)
NEXERA Accessories
703-03-09BK
Safety Cable
258-01-01P
Black Gobo Holder
287391
Lamp, GLC 115V
294322
Lamp, GLA 115V
363721
Lamp, GKV 230V
363739
Lamp, GLB 230V
7042-XX
Power/Data Cable (XX=Length)*
NEXERA Power Supply (PS-Series)
20600
Power Supply for 24 NEXERA Luminaires
20300
Power Supply for 12 NEXERA Luminaires
20150
Power Supply for 6 NEXERA Luminaires
NEXERA AC Power Connectors
PP2PGMC
Stage Pin Connector
LEV2311BK
Twist Lock Connector
HBL5266C
Edison Connector
*Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
TM
Specifications–Wash–CDM Source
Luminaire Series
Power/Data
Ballast voltage 120/277 VAC
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Cable: 36" Teflon coated leads encased in heat
resistant black fiberglass sleeve
Control
Uses DMX512-A Protocol
General
A component of the Wybron Infotrace Series
of Products
Integral Color Module provides a nearly infinite
color palette plus mechanical dimming via
4-channel DMX control
Gate Assembly: Four 20 gauge stainless steel
shutters operating in three independent planes,
with “M” size Gobo and Iris slot
150 watt compact, CDM light source
Integral electronic ballast
Precise, tool-free lamp optimization
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Color position /main address,
user selectable 1-512
Control input and daisy chain via 4 pin XLR
Parameters and features selectable
with Infotrace/RDM:
Base Address
Firmware Upgrade
Optical
Standard 7.5-inch accessory holders
Integral safety cable mount on fixture
Computer optimized optics
Color LCD display for user settings
Reflector: Dichroic coated borosilicate cold mirror
Front mounting plate for additional accessories
Lenses: High temperature borosilicate
Integrated stainless steel safety cable
Precision milled aluminum construction
Compact, elegant design allows hanging on
12" centers
Accepts power and data on one cable
4 pin XLR connector for power and data
4 pin XLR connector output for daisy chaining units
Extremely quiet, convection cooled, no fans
High impact, thermally insulating handles
Yoke: Flat steel with two mounting positions
UL Approved
Made in the USA
Accessories
Includes malleable iron pipe clamp
Optionally available with installed Stage pin,
Twist lock & Edison connectors
Black gobo holder
DX
TM
Specifications–Wash–CDM Source
DX
Luminaire Series
Photometrics–150W CDM Lamp @ 115V
Dimensions & Weights
Wash (CDM) Model 2580LX
Narrow Focus
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
26°
77,200 (Cd)
4770
31.8 LPW
34.1%
Distance (ft)
20
30
40
50
Field Diameter (ft)
9.3
13.8
18.4
23.0
7.6"/193mm
198
86
14°
48
31
26°
8.5"/215mm
20.7"/525mm
19.1"/484mm
Field Angle
Illumination (fc)
Beam Angle
10.7"/271mm
12.4"/314mm
8.7"/221mm
14.4"/367mm
Wide Focus
9.3"/235mm
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
33°
44,940 (Cd)
5080
33.9 LPW
36.3%
15
20
25
Field Diameter (ft)
7.7
11.8
15.6
19.5
Illumination (fc)
266
119
67
43
19°
33°
Specifications as of 2/1/06 and may be subject to change
Lamp Data
Socket: G12 style, rated to 350º C
Tool-free precision lamp alignment
Lamp Watts(nominal)
150
Rated Lumens
14,000
Rated Hours
10,000
Color Temp
3000K
Color Rendering Index
85
Efficacy
93
6.6"/168mm
Weight: Weight: 24.9 lbs. (11.3 kg)
Accessory holder: 7.5”
Field Angle
10
Beam Angle
Distance (ft)
13.9"/352mm
Ordering Information
NEXERA Luminaire
Model
Description
2580LX
NEXERA Wash (CDM)
NEXERA Accessories
703-03-09BK
Safety Cable
258-01-01P
Black Gobo Holder
287391
Lamp, GLC 115V
294322
Lamp, GLA 115V
363721
Lamp, GKV 230V
363739
Lamp, GLB 230V
7042-XX
Power/Data Cable (XX=Length)*
NEXERA Power Supply (PS-Series)
20600
Power Supply for 24 NEXERA Luminaires
20300
Power Supply for 12 NEXERA Luminaires
20150
Power Supply for 6 NEXERA Luminaires
NEXERA AC Power Connectors
PP2PGMC
Stage Pin Connector
LEV2311BK
Twist Lock Connector
HBL5266C
Edison Connector
*Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
TM
Specifications–Wash–Tungsten Source
Luminaire Series
Power/Data
Lamp line voltage 120/240 VAC
Receives 24v DC and DXM/RDM from
Wybron PS Series Power supply
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Cable: 36" Teflon coated leads encased in heat
resistant black fiberglass sleeve
Control
Uses DMX512-A Protocol
General
A component of the Wybron Infotrace Series
of Products
Integral Color Module provides a nearly infinite
color palette via 3-channel DMX control
Gate Assembly: Four 20 gauge stainless steel
shutters operating in three independent planes,
with “M” size Gobo and Iris slot
575 watt compact tungsten, high CRI source
(GLC/GLA)
Precise, tool-free lamp optimization
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Color position /main address,
user selectable 1-512
Control input and daisy chain via 4 pin XLR
Parameters and features selectable
with Infotrace/RDM:
Base Address
Firmware Upgrade
Optical
Standard 7.5-inch accessory holders
Integral safety cable mount on fixture
Computer optimized optics
Color LCD display for user settings
Reflector: Dichroic coated borosilicate cold mirror
Front mounting plate for additional accessories
Lenses: High temperature borosilicate
Integrated stainless steel safety cable
Precision milled aluminum construction
Accessories
Compact, elegant design allows hanging on
12" centers
Includes malleable iron pipe clamp
Accepts power and data on one cable
Optionally available with installed Stage pin,
Twist lock & Edison connectors
4 pin XLR connector for power and data
4 pin XLR connector output for daisy chaining units
Extremely quiet, convection cooled, no fans
High impact, thermally insulating handles
Yoke: Flat steel with two mounting positions
UL Aproved
Made in the USA
Black gobo holder
DX
TM
Specifications–Wash–Tungsten Source
DX
Luminaire Series
Photometrics–Tungsten 575W GLC @115V
Dimensions & Weights
Wash (Tungsten) Model 2560LX
Narrow Focus
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
25°
116,000 (Cd)
6830
11.9 LPW
44.1%
Distance (ft)
20
30
40
50
Field Diameter (ft)
9.2
13.4
17.9
22.4
7.6"/193mm
290
130
12°
72
45
25°
8.5"/215mm
20.7"/525mm
19.1"/484mm
Field Angle
Illumination (fc)
Beam Angle
10.7"/271mm
12.4"/314mm
8.7"/221mm
14.4"/367mm
Wide Focus
9.3"/235mm
Candlepower
32°
67,500
Field Lumens
Efficacy
Efficiency
7250
12.6 LPW
46.8%
10
15
20
25
Field Diameter (ft)
5.8
8.3
11.5
14.3
Illumination (fc)
675
307
178
109
18°
32°
Beam Angle
Distance (ft)
Weight: Weight: 24.9 lbs. (11.3 kg)
Accessory holder: 7.5”
Specifications as of 2/1/06 and may be subject to change
Lamp Data
Socket: G9.5 style, rated to 350º C
Tool-free precision lamp alignment
ANSI
Code
13.9"/352mm
6.6"/168mm
Field Angle
Degree
Watts
Rated
VAC
Color
Temp
Rated
Hours
Rated
Lumens
GLC
575
115
3200
400
15500
GLA
575
115
3100
1500
13500
GKV
600
230
3200
400
15000
GLB
600
230
3100
1500
13000
Ordering Information
NEXERA Luminaire
Model
Description
2560LX
NEXERA Wash
NEXERA Accessories
703-03-09BK
Safety Cable
258-01-01P
Black Gobo Holder
287391
Lamp, GLC 115V
294322
Lamp, GLA 115V
363721
Lamp, GKV 230V
363739
Lamp, GLB 230V
7042-XX
Power/Data Cable (XX=Length)*
NEXERA Power Supply (PS-Series)
20600
Power Supply for 24 NEXERA Luminaires
20300
Power Supply for 12 NEXERA Luminaires
20150
Power Supply for 6 NEXERA Luminaires
NEXERA AC Power Connectors
PP2PGMC
Stage Pin Connector
LEV2311BK
Twist Lock Connector
HBL5266C
Edison Connector
*Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
PS-SERIES
Specifications-150W, 300W & 600W
Powe r S u p p l i e s
Power/Data
Accepts all standard voltages worldwide
(100-132 VAC 50/60 Hz and 170-240 VAC 50/60 Hz
Sends/passes 24v DC and DXM/RDM
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Control
General
A component of the Wybron Infotrace Series
of Products
Control and power for the following Wybron products:
• NEXERA LX Luminaires
• CXI IT Color Changers
• COLORAM IT Color Changers
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Parameters and features selectable
with Infotrace/RDM:
Device Label
Firmware Upgrade
• ECLIPSE IT SHUTTER/ ECLIPSE IT IRIS Dowsers
• FORERUNNER Color Changers
Front & rear LEDs indicating signal and power
Integrated stainless steel safety cable
Truss or rack mountable; free standing
.063” aluminum sheet metal construction
4 pin XLR connector for power and data
4 pin XLR connector for output
Made in the USA
Infotrace/RDM feedback information
Type of Device
Voltage Output Sensor
Device Drop Warning
PS-SERIES
Specifications-150W, 300W & 600W
Powe r S u p p l i e s
Dimensions & Weights
Equipment Compatibility**
PS-150 Model 820150
The following is a chart of compatibility and capacity of
the various models of the PS-Series Power Supply and
the companion devices.
Power Supply
PS-150 PS-300 PS-600
Model
820150 820300 820600
Output Power
150W
300W
600W
3.27"/83.10mm
7.60"/193.10mm
2.88"/73.10mm
Maximum devices per Power Supply
12.75"/323.90mm
Weight: 3.90 lbs./1.77kg
Description
Model
Head Ft.
CXI IT 7.5”
87200
1500
6
12
24
CXI IT 4”
84560
1500
6
12
24
CXI IT Lg Format
816050
750
2
5
9
CXI IT 12”
812210
500
2
4
8
CXI IT 8-light
816130
750
3
6
12
CXI IT Mariner
87220
1500
6
12
24
CXI IT MultiPar
87240
1000
4
9
18
1500
8
16
32
NEXERA LX (CDM)
2560LX, 2570LX,
2640LX
2580LX, 2600LX,
2650LX
1500
6
12
24
COLORAM IT 7.5”
87110
1500
6
12
24
COLORAM IT 4”
84520
1500
6
12
24
COLORAM IT 10”
810100
1000
4
8
16
COLORAM IT Lg Frmt
816090
1000
6
12
24
NEXERA LX (tungsten)
7.85"/199.40mm
2.96"/75.20mm
3.35"/85.10mm
PS-300 Model 820300
14.0"/355.60mm
Weight: 5.40 lbs./2.45kg
COLORAM IT 15”
815010
1000
6
12
24
COLORAM IT 8-light
816080
1000
5
10
20
AQUARAM IT 7.5”
87080
1000
5
10
20
AQUARAM IT Lg Frmt
85000
1000
6
12
24
ECLIPSE IT SHUTTER 1K
89001
1500
8
16
32
ECLIPSE IT SHUTTER 2K
811010
1500
8
16
32
ECLIPSE IT SHUTTER Frmt
Lg
817000
1500
8
16
32
ECLIPSE IT IRIS 1K
87250
1500
6
12
24
ECLIPSE IT IRIS 2K
812020
1500
6
12
24
ECLIPSE IT IRIS 24”
823020
750
3
6
12
FORERUNNER 4”
4540
n/a
16
32
64
FORERUNNER 7”
7140
n/a
16
32
64
1
Some watts/unit numbers are rounded up/down ** The above information
assumes devices are on different channels and all move simultaneously
PS-600 Model 820600
7.85"/199.40mm
4.03"/102.40mm
4.42"/112.30mm
Ordering Information
14.0"/355.60mm
PS-SERIES Power Supply
Model
Description
820150
150W Power Supply
820300
300W Power Supply
820600
600W Power Supply
PS-SERIES Power Supply Accessories
Power/Data Cable (XX=Length)*
7042-XX
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
Weight: 7.90 lbs./3.58kg
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
Specifications-450W Wall Mount
Powe r S u p p l y
Power/Data
Accepts all standard voltages worldwide
(100-132 VAC 50/60 Hz and 170-240 VAC 50/60 Hz)
Sends/passes 24v DC and DXM/RDM
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
24 Volts DC
Conductor Size
14 AWG
22 AWG
22 AWG
14 AWG
*Not Compatible with Ram II Power Supplies
Wiring Diagram
Three power & signal outputs
to CMX distribution box
(maximum of 3 @100W)
CMX distribution box
CMX distribution box
CMX distribution box
Two power &
100-132 VAC 50/60 Hz
signal outputs to
170-240 VAC 50/60 Hz
CMX distribution box
(maximum of 3 @100W)
General
A component of the Wybron Infotrace Series
of Products
Control and power for the following Wybron products:
• NEXERA LX Luminaires
• CXI IT Color Changers
• COLORAM IT Color Changers
• ECLIPSE IT SHUTTER/ ECLIPSE IT IRIS Dowsers
• FORERUNNER Color Changers
Front indicating signal and power
Control
Uses DMX512-A Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Parameters and features selectable
with Infotrace/RDM:
Device Label
Firmware Upgrade
.063” aluminum sheet metal construction
Power and data connections made on DIN rail
Infotrace/RDM feedback information
UL Approved
Type of Device
Made in USA
Voltage Output Sensor
Device Drop Warning
Specifications-450W Wall Mount
Powe r S u p p l y
Dimensions & Weights
Equipment Compatibility**
PS-450i Model 20250
The following is a chart of compatibility and capacity
of the PS-450i Power Supply and the companion devices.
Power Supply
PS-450i
Model
20250
Output Power/CMX Distribution Box (3Max)
100W
19.08"/485mm
Maximum devices per Power Supply
Description
Model
CXI IT 7.5”
87200
1500
4
12
CXI IT 4”
84560
1500
4
12
CXI IT Lg Format
816050
750
1
3
CXI IT 12”
812210
500
1
3
CXI IT 8-light
816130
750
2
6
CXI IT Mariner
87220
1500
4
12
CXI IT MultiPar
6.55"/166mm
Weight: 16.40 lbs./7.44kg
1
Total/PSU
87240
1000
2
6
1500
5
15
NEXERA LX (CDM)
2560LX, 2570LX,
2640LX
2580LX, 2600LX,
2650LX
1500
4
12
COLORAM IT 7.5”
87110
1500
4
12
COLORAM IT 4”
84520
1500
4
12
COLORAM IT 10”
810100
1000
2
6
COLORAM IT Lg Frmt
816090
1000
4
12
NEXERA LX (tungsten)
13.16"/334mm
Head Ft. per CMX
COLORAM IT 15”
815010
1000
4
12
COLORAM IT 8-light
816080
1000
3
9
AQUARAM IT 7.5”
87080
1000
3
9
AQUARAM IT Lg Frmt
85000
1000
4
12
ECLIPSE IT SHUTTER 1K
89001
1500
5
15
ECLIPSE IT SHUTTER 2K
811010
1500
5
15
ECLIPSE IT SHUTTER Frmt
Lg
817000
1500
5
15
ECLIPSE IT IRIS 1K
87250
1500
4
12
ECLIPSE IT IRIS 2K
812020
1500
4
12
ECLIPSE IT IRIS 24”
823020
750
2
6
FORERUNNER 4”
4540
n/a
10
30
FORERUNNER 7”
7140
n/a
10
30
Some watts/unit numbers are rounded up/down ** The above information
assumes devices are on different channels and all move simultaneously
Ordering Information
PS-450i Power Supply
Model
20250
PS-450i Accessories
7042-XX
Description
450W Power Supply
Power/Data Cable (XX=Length)*
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
SPLIT
Specifications
Opto Splitter
Control Inputs
SPLIT
RDM RESPONSES
POWER
DMX
IN
RDM
IN
1
2
3
4
5
DMX512-A/RDM
MODEL 4190
6
7
8
Control Outputs
Uses DMX512-A/RDM Protocol
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Parameters and features selectable
with Infotrace/RDM:
General
A component of the Wybron Infotrace Series
of Products
Splits one DMX/RDM line into eight segments and
works with the following Wybron products:
Device Label
Firmware Upgrade
Infotrace/RDM feedback information
• NEXERA LX Luminaires
Type of Device
• CXI IT Color Changers
• COLORAM IT Color Changers
• ECLIPSE IT SHUTTER/ ECLIPSE IT IRIS Dowsers
Individual front LEDs indicating signal and power
Integrated stainless steel safety cable
Device Drop Warning
Dimensions & Weights
SPLIT IT Model 4190
Truss or rack mountable; free standing
.063” aluminum sheet metal construction
One 5 pin XLR connector for one DMX/RDM
universe of input
Eight 5 pin XLR connectors that split one DMX/RDM
into 8 separate DMX/RDM lines within one DMX/RDM
universe
13.31"/338mm
5.79"/147mm
Made in USA
1.70"/43mm
Power/Data
Accepts all standard voltages worldwide
(100-240 VAC ~ 50/60 Hz 0.15-0.08A)
Weight: 2.88 lbs./1.30kg
Sends/passes DXM/RDM
XLR Connector Pin Out
XLR Pin #
Function
1
Ground
2
Data +
3
Data 4
not used
5
not used
2.10"/53mm
Conductor Size
14 AWG
22 AWG
22 AWG
Ordering Information
SPLIT IT Opto Splitter
Model
4190
Description
8-Port DMX/RDM signal splitter
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com
TRANSITION
Specifications–CMY Color-mixing Illuminator
Fiber Illuminator
Power/Data
Input voltage 120/240 VAC 50/60 Hz
DMX In: Male XLR 5-pin
DMX Out: Female XLR 5-pin
Circuit breaker protection
Optical
Reflector: Dichroic coated borosilicate cold mirror
Filters: CMY dichroic filters, quality controlled for
consistent color
Hexagonal color integration element insures even
color distribution
Socket: G12 style, rated to 350º C
General
Automatically optimized
A component of the Wybron Infotrace Series
of Products
Control
Integral Color Module provides a nearly infinite
color palette with uniform color integration
Uses four channels of DMX512-A Protocol ; cyan,
Accepts up to 38mm common end fiber bundles
Infotrace features available using
ANSI E1.20 – 2006 Remote Device Management
over USITT DMX512 standard
Integral electronic ballast & power supply
Uses four channels of DMX control; cyan, magenta,
yellow and a mechanical dimmer
Rugged high-temperature, powder coated .063”
aluminum sheet metal construction
Remote Device Management ready
magenta, yellow and a mechanical dimmer
Parameters and features selectable
with Infotrace/RDM:
Base Address
Firmware Upgrade
Fiber common end remains cool–will not
burn PMMA fiber
Lamp Data
Compact, elegant design with quick
color changing
Lamp Watts(nominal)
150
Rated Hours
10,000
10,000 hour lamp life
Color Temp
3000K or 4200K
150 watt compact, UHI/CDM light source
Color Rendering Index
85
UL Approved
Ordering Information
Dimensions & Weights
TRANSITION Model 8670, 8675, 8677
Weight:
8.10 lbs./3.68kg
11.90"/303mm
13.40"/341mm
7.40"/188mm
7.80"/197mm
6.30"/160mm
TRANSITION Fiber Illuminator
Model
Description
8670
CMY Color Mixing Illuminator
8675
CMY Color Mixing Illuminator w/Twinkle Wheel
8677
Fixed Color Illuminator
TRANSITION Fiber Illuminator Accessories
5000950
UHI 3000K Lamp
5000875
UHI 4200K Lamp
232728
CDM 3000K Lamp
373696
CDM 4200K Lamp
DMX 512 Cable (XX=Length)*
7033-XX
* Available in 3’, 5’, 10’, 15’, 25’, 50’, 75’, & 100’ lengths
TEL 800•624•0146 • TEL 719 • 548 • 9774 • FAX 719 • 548 • 0432 • EMAIL: info@wybron.com • WEBSITE: www.wybron.com