Eizo FLEXSCAN T1502-B - User`s manual

PRECAUTIONS
Notice for this monitor
CONTENTS
Chapter 1 Features and Overview
1-1 Features
1-2 Buttons and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Screen Adjustment
2-3 Color Adjustment
Important
Please read this User’s Manual, and the
Setup Manual (separate volume) carefully
to familiarize yourself with safe and
effective usage.
2-4 Off Timer Settings
2-5 Power Indicator/EIZO Logo Display Settings
2-6 Locking Buttons
2-7 Setting Adjustment Menu Position
2-8 Viewing Information/Setting Language
2-9 Setting BrightRegulator
2-10 Resumption of Default Setting
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
The latest User’s Manual is available for
download from our web site:
http://www.eizo.com
Chapter 4 Troubleshooting
Chapter 5 Reference
5-1 Attaching an Arm
5-2 Power Saving Mode
5-3 Specifications
5-4 Glossary
5-5 Preset Timing
How to Setup
Please read the Setup Manual (separate volume)
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure to abide by the information in a WARNING may
result in serious injury and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION may
result in moderate injury and/or property or product
damage.
Indicates a prohibited action.
Indicates a mandatory action that must be followed.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless
prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specifications are subject to change without notice.
Apple, ColorSync, eMac, iBook, iMac, iPad, Mac, MacBook, Macintosh, Mac OS, PowerBook, and QuickTime are registered trademarks of
Apple Inc.
Windows, Windows Media, Windows Vista, SQL Server, and Xbox 360 are registered trademarks of Microsoft Corporation in the United States
and other countries.
VESA is a registered trademark of Video Electronics Standards Association.
EIZO, the EIZO Logo, ColorEdge, DuraVision, FlexScan, FORIS, RadiCS, RadiForce, RadiNET, Raptor, and ScreenManager are registered
trademarks of EIZO NANAO CORPORATION in Japan and other countries.
All other company and product names are trademarks or registered trademarks of their respective owners.
This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this
region, the product may not perform as stated in the specifications.
PRECAUTIONS
IMPORTANT
• This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specified in the specifications.
• To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on
the monitor.
[Location of Caution Statement]
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes
strange noises, disconnect all power connections immediately and contact
your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment
damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in
fire, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into
the cabinet may result in fire, electric shock, or equipment damage.
If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit
checked by a qualified service engineer before using it again.
PRECAUTIONS
1
WARNING
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
Use the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)
• Do not place in a dusty or humid environment.
• Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.).
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidifier.
• Do not place in a location where the product is subject to direct sunlight.
• Do not place in an inflammable gas environment.
To avoid danger of suffocation, keep the plastic packing bags away from
babies and children.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Failure to do so may result in fire or electric shock.
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to another voltage
than specified in this User’s Manual may cause fire, electric shock, or equipment damage.
• Do not overload your power circuit, as this may result in fire or electric shock.
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire
or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
2
PRECAUTIONS
WARNING
When attaching an arm stand, please refer to the user’s manual of the arm
stand and install the unit securely.
Not doing so may cause the unit to become unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
When reattaching the tilt stand, please use the same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
If some physical symptoms result, please consult your doctor.
Fluorescent backlight lamps contain mercury (the products that have LED
backlight lamps contain no mercury), dispose according to local, state or
federal laws.
PRECAUTIONS
3
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord
attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
• Do not place any objects on the ventilation slots.
• Do not install the unit in a closed space.
• Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or
equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the
power cord from the wall socket after turning off the power switch for the
safety and the power conservation.
4
PRECAUTIONS
Notice for this monitor
This product is suited to general purposes like creating documents, viewing multimedia content.
This product may not be covered by warranty for uses other than those described in this manual.
The specifications noted in this manual are only applicable when the following are used:
• Power cords provided with the product
• Signal cables specified by us
Only use optional products manufactured or specified by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain
stable display.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to
“Cleaning”).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on
the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a fixed lifetime. When the screen becomes dark or begins to flicker, please contact
your local EIZO representative.
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt to
brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may
occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the
dew condensation disappears, otherwise it may cause some damage to the monitor.
(Cautions for the Use of the Touch Panel)
• During touch operation
Be careful of the following points. Otherwise, damage may occur to the monitor.
-- Do not strongly press, scratch, or poke the panel.
-- Do not touch the panel with hard objects such as ballpoint pens or metals.
PRECAUTIONS
5
Cleaning
Attention
• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or
panel, and also quality deterioration of the image.
• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.
• Do not allow liquid to enter the clearance between the panel and the panel frame.
NOTE
• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.
If necessary, the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the
environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
6
PRECAUTIONS
CONTENTS
Cover
. ............................................................ 1
PRECAUTIONS....................................................... 1
Notice for this monitor............................................... 5
Cleaning.................................................................. 6
To use the monitor comfortably............................ 6
CONTENTS.............................................................. 7
Chapter 5 Reference.......................................... 24
5-1 Attaching an Arm............................................ 24
5-2 Power Saving Mode........................................ 25
5-3 Specifications................................................. 26
5-4 Glossary.......................................................... 29
5-5 Preset Timing.................................................. 30
Chapter 1 Features and Overview...................... 8
1-1 Features............................................................. 8
1-2 Buttons and Indicators..................................... 8
1-3 Functions and Basic Operation....................... 9
Chapter 2 Settings and Adjustments............... 11
2-1 Utility Disk........................................................11
2-2 Screen Adjustment......................................... 12
Digital Input........................................................... 12
Analog Input......................................................... 12
2-3 Color Adjustment............................................ 15
Simple Adjustment [FineContrast Mode]........... 15
Advanced Adjustments [Adjustment Menu]...... 16
2-4 Off Timer Settings........................................... 17
2-5 Power Indicator/EIZO Logo Display Settings...
. ........................................................................ 18
2-6 Locking Buttons............................................. 18
2-7 Setting Adjustment Menu Position............... 19
2-8 Viewing Information/Setting Language........ 19
2-9 Setting BrightRegulator................................. 19
2-10 Resumption of Default Setting...................... 20
Chapter 3 Connecting Cables........................... 21
3-1 Connecting Two PCs to the Monitor............. 21
Chapter 4 Troubleshooting................................ 22
CONTENTS
7
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• Dual-input compliant (DVI-D and D-sub mini 15-pin connectors)
• DVI digital input (TMDS) compliant
• Horizontal scan frequency: Analog: 24.8 - 60 kHz
Digital: 31 - 49 kHz
• Vertical scan frequency: Analog: 55 - 75 Hz
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
• Resolution: 1024 dots × 768 lines
• Stereo speakers
• Smoothing (soft - sharp) function
• BrightRegulator function incorporated
• FineContrast mode to allow the best mode for screen display
• Touch Panel provided
• Touch Panel Pointer “TP1” is available (optional)
NOTE
• The stand of the unit can be replaced
with an arm or another stand. (Refer
to “5-1 Attaching an Arm” on page
24.)
1-2 Buttons and Indicators
Adjustment menu (*ScreenManager ® )
Buttons
NOTE
1.
2.
3.
4.
5.
6.
7.
8.
• While the screen is displayed, the
blue power indicator that is lighting
blue can be turned off (see “To turn
off the Power indicator while a screen
is displayed [Power Indicator]” on
page 18).
• For the power indicator status with
“Off Timer” set, refer to “To set
monitor power-off time [Off Timer]”
on page 17.
Sensor (BrightRegulator)
Volume control button
Input signal selection button
Mode button
Control buttons (Left, Right)
Enter button
Power button
Power indicator
Indicator status
Operation status
Blue
The screen is displayed
Orange
Power saving
Off
Power off
* ScreenManager
8
®
is an EIZO’s nickname of the Adjustment menu.
Chapter 1 Overview and Features
1-3 Functions and Basic Operation
To adjust the screen and color
Main menu (Refer to page 10 for operation)
(for analog signal input only)
Adjustment
1 Screen
(Automatic
Adjustment)
• The Adjustment menu and the FineContrast mode
cannot be displayed at the same time.
FineContrast mode
Page 15
Color Adjustment
(Simple adjustment) [FineContrast mode]
This function allows easy selection of a desired mode
from three modes according to monitor application.
Page 12
● To adjust flickering and position
[Screen]……………………………… see page 12
● To adjust color gradation automatically
[Range]……………………………… see page 14
Adjustment
2 Screen
(Advanced Adjustment)
Page 12
[Adjustment menu]
[At analog signal input]
[At digital signal input]
● To eliminate vertical bars [Clock*]…… see page 13
● To remove flickering or blurring
[Phase*]………………………………… see page 13
● To correct screen position
[Hor. Position*]………………………… see page 13
[Ver. Position*]………………………… see page 13
● To modify blurred characters/lines
[Smoothing]… ………………………… see page 14
*
Brightness Adjustment
Press
or
to adjust brightness.
Items marked with * can be adjusted with analog
input.
Color Adjustment
(Advanced Adjustment)
Page 16
Volume Adjustment
1 Press
.
2 Press
or
● “Brightness,” “Contrast,” “Temperature,”
“Gamma,” and “Gain” can be set for each mode
(Custom/sRGB/Text).
Settable functions vary with the display mode.
to adjust volume.
Resumption of Default Setting
● To reset color adjustment [Reset]…… see page 20
Chapter 1 Overview and Features
9
To make useful settings/adjustments
Adjustment menu (Refer to below for operation)
Information
Page 19
● To check settings, usage time, etc. [Information]
Language
Setting Input Signal Selection
● To set input signal selection
[Input Signal]… ……………………… see page 21
Page 19
● To set a language to be displayed [Language]
Off Timer Setting
● To set monitor power-off time
[Off Timer]……………………………… see page 17
Setting Adjustment Menu Position
● To adjust the menu position
[Menu Position]… …………………… see page 19
EIZO Logo Display Setting
BrightRegulator setting
● To set automatic brightness adjustment
[BrightRegulator] ……………………… see page 19
● To display EIZO logo [EIZO Logo Appearing
Function]… ………………………… see page 18
Locking Buttons
Power Indicator Setting
● To turn off the Power indicator while a screen is
displayed
[Power Indicator]……………………… see page 18
● To lock operation [Adjustment Lock]
… …………………………………… see page 18
Connecting Cables
● Connecting Two PCs to the Monitor
… …………………………………… see page 21
Resumption of Default Setting
● To reset all settings
[Reset]… ……………………………… see page 20
Basic operation of Adjustment menu
[Displaying Adjustment menu and selecting function]
(1) Press
. The main menu appears.
(2) Select a function with
or
, and press
. The sub menu appears.
(3) Select a function with
or
, and press
. The adjustment/setting menu appears.
(4) Adjust the selected item with
or
, and press
. The setting is saved.
[Exiting Adjustment menu]
(1) Choose <Return> from the sub menu and press
(2) Choose <Exit> from the main menu and press
.
.
NOTE
• The Adjustment menu can also be exited by pressing
10
Chapter 1 Overview and Features
twice quickly.
Chapter 2 Settings and Adjustments
2-1 Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the application software programs.
● Disk contents and software overview
The disk includes a touch panel driver, an application software program for adjustment, and User's Manual. Refer to
“Readme.txt” on the disk for software startup procedures or file access procedures.
Item
Overview
For Windows
For Macintosh
√
−
Available for easy adjustments of the
monitor screen following adjustment
patterns and procedures on the
screen.
√
−
Driver for touch panel
√
−
A “Readme.txt” file
Screen Adjustment Program
Touch Panel Driver
User’s Manual of this monitor (PDF file)
User’s Manual for Touch Panel Driver (PDF file)
Chapter 2 Settings and Adjustments
11
2-2 Screen Adjustment
Digital Input
When digital signals are input, images are displayed correctly based on the
preset data of the monitor.
Analog Input
The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for
the first time or when the settings of the PC in use are updated.
1 To adjust screen automatically [Screen]
.
(1) Choose <Screen> from the <Auto Adjustment> menu, and press
(2) Select “Execute” with
or
, and press
.
(3) Flickering, screen position, and screen size are corrected by the autoadjustment function.
If satisfactory adjustment cannot be obtained with the autoadjustment function, perform the adjustment following the
procedure below. When the screen is displayed correctly, go to step
4 “Range Adjustment”.
Advanced Adjustment
2 Run the Screen Adjustment Program.
Load the EIZO LCD Utility Disk on the PC, and start the Screen
Adjustment Program.
After the program starts up, perform the adjustment in step 3 following the
instructions of the program.
12
NOTE
• Use “Screen Adjustment Program” on
the supplied EIZO LCD Utility Disk.
The auto-adjustment function works in the following cases:
• When a signal is input into the monitor for the first time
• When a signal is input into the monitor for the first time after the
resolution or refresh rate of input signals is changed
[Adjustment Procedure]
Automatic Adjustment
Attention
• Wait 30 minutes or more from
monitor power on before starting
adjustments.
Chapter 2 Settings and Adjustments
Attention
• This function works correctly when
an image is fully displayed over
the display area. It does not work
properly when an image is displayed
only on a part of the screen (DOS
prompt window, for example) or
when a black background (wallpaper,
etc.) is in use.
• This function does not work correctly
with some graphics boards.
• “Auto in Progress” appears on the
screen during auto adjustment.
NOTE
• If no adjustment program is available
for your PC, display a checkerboard
pattern on the screen (see below) and
go to the following steps.
3 Perform advanced adjustments for the following using the
NOTE
• Press the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
proceed to [Phase] to remove
flickering or blurring.
<Screen> menu of the Adjustment menu.
● To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and press
The <Clock> menu appears.
(2) Adjust the clock with
or
The adjustment is completed.
, and press
.
.
Attention
• Flickering or blurring may not be
eliminated depending on your PC or
graphics board.
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
“To eliminate vertical bars [Clock].”
(Clock → Phase → Position)
● To remove flickering or blurring [Phase]
(1) Choose <Phase> from the <Screen> menu, and press
The <Phase> menu appears.
(2) Adjust the phase with
or
The adjustment is completed.
, and press
.
.
● To correct screen position
[Hor. Position], [Ver. Position]
Since the number of pixels and the pixel positions are fixed on
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
(1) Choose <Hor. Position> and or <Ver. Position> from the <Screen>
.
menu, and press
The <Hor. Position> or <Ver. Position> menu appears.
(2) Adjust the position with
or
to display the image properly
in the display area of the monitor.
Chapter 2 Settings and Adjustments
13
4 Adjust the signal output range.
● To adjust color gradation automatically [Range]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Choose <Range> from the <Auto Adjustment> menu, and press
.
(2) Select “Execute” with
or
, and press
.
(3) Color gradation is adjusted correctly by the auto-adjustment
function.
The output range is adjusted automatically.
When using the “Screen Adjustment Program”, the program is finished.
5 Change the smoothing setting.
● To modify blurred characters/lines [Smoothing]
When a low-resolution image is displayed, the characters or lines of
the displayed image may be blurred.
(1) Choose <Smoothing> from the <Screen> menu, and press
The <Smoothing> menu appears.
.
(2) Select a suitable level from 1 to 5 (where 1 = soft and 5 = sharp)
with
or
, and press
.
The smoothing adjustment is completed.
14
Chapter 2 Settings and Adjustments
2-3 Color Adjustment
Simple Adjustment [FineContrast Mode]
This function allows you to select the best display mode for monitor brightness,
etc.
● FineContrast mode
An appropriate display mode is selectable out of three modes.
Mode
Purpose
Custom
Available for making desired setting.
sRGB
Suitable for color matching with sRGB compatible
peripherals.
Text
Suitable for displaying texts for word processing or
spreadsheets.
FineContrast mode name
Example) Custom
Displays current mode.
● To select FineContrast mode
(1) Press
NOTE
.
The FineContrast mode changes at every time pressing
(2) Choose desired mode and press
The setting completes.
.
• The Adjustment menu and the
FineContrast mode cannot be
displayed at the same time.
.
Chapter 2 Settings and Adjustments
15
Advanced Adjustments [Adjustment Menu]
Attention
Independent setting and saving of color adjustment are available for each
FineContrast mode.
● To select an appropriate mode for images
√ : Adjustment available
Icon
FineContrast mode
Function
Custom
sRGB
Text
Brightness
√
√
√
Contrast
√
−
√
Temperature
√
−
√
Gamma
√
−
√
Gain
√
−
−
Reset
√
√
√
Menu
Brightness
−: Invalid for adjustment
Description
Adjustment range
To adjust the full screen
brightness as desired
NOTE
0 to 100%
NOTE
• You can also adjust the brightness by pressing
or
button while the adjustment menu is not displayed.
• Press
Contrast
after adjustment.
To adjust the contrast of the 0 to 100%
image
Temperature To select a color
temperature
4000K to 10000K in units of 500K
(including 9300K).
NOTE
• Setting the value to “Off” presents the natural color of the
panel.
• The values shown in the Kelvin (K) are available only as
reference.
Gamma
Gain
To set a gamma value
1.8, 2.0, 2.2
To adjust red, green, and
0 to 100%
blue to a desired color tone Adjust the respective brightness of
respectively
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
NOTE
• Values shown in percentage are available only as reference.
• When using the <Gain> setting, the <Temperature> setting is
set to “Off”.
Reset
To reset the color settings of the selected FineContrast mode to
the default settings
● To set/adjust color
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Select a desired function from the <Color> menu, and press
The selected function menu appears.
(3) Adjust the selected item with
or
The adjustment is completed.
16
• Perform [Range Adjustment] before
starting color adjustment for analog
input signals.
Refer to “To adjust color gradation
automatically” on page 14.
• Wait 30 minutes or more from
monitor power on before starting the
color adjustment.
• Choose “Reset” in the <Color> menu
to revert to the default settings (factory
settings) of hue of the color mode
selected.
• The same image may be seen in
different colors on multiple monitors
due to their monitor-specific
characteristics. Make fine color
adjustment visually when matching
colors on multiple monitors.
Chapter 2 Settings and Adjustments
, and press
.
.
• The Adjustment menu and the
FineContrast mode cannot be
displayed at the same time.
• Adjustable functions vary depending
on the type of FineContrast mode.
2-4 Off Timer Settings
● To set monitor power-off time [Off Timer]
This function allows the monitor to automatically turn off after a specified time
has passed. This function serves to reduce afterimages caused when the monitor
screen is left on for a long time period without use. Use this function when an
image is displayed throughout the day.
Attention
• The Off Timer functions even in the
power saving mode, but the advance
notice is disabled. The monitor power
is turned off without advance notice.
[Off Timer System]
Timer
ON time (1H - 23H)
Monitor
Power Indicator
Operating
Blue
Last 15 min. in “ON time” Advance Notice*
Flashing blue
“ON time” expired
Off
Power Off
* When
is pressed during the advance notice period, the monitor continues to operate for
additional 90 minutes. Extension of operation time can be set without limitation.
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Off Timer> from the <Others> menu, and press
The <Off Timer> menu appears.
(3) Select “Enable” with
or
, and press
(4) Set a monitor ON time (1 to 23 hours) with
The Off Timer setting is completed.
.
.
.
or
, and press
.
[Resumption Procedure]
• Press
.
Chapter 2 Settings and Adjustments
17
2-5 Power Indicator/EIZO Logo Display
Settings
● To turn off the Power indicator while a screen is displayed
[Power Indicator]
This function enables to turn off the Power indicator (blue) while a screen is
displayed.
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Power Indicator> from the <Others> menu, and press
NOTE
• The Power indicator lights up at
power on with the default setting.
.
The <Power Indicator> menu appears.
(3) Select “Disable” with
or
, and press
.
The Power Indicator setting is completed.
● To display EIZO logo [EIZO Logo Appearing Function]
When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
(1) Press
(2) Press
to turn off the unit.
again while pressing
to turn on the unit.
The EIZO Logo display/non-display function is toggled.
2-6 Locking Buttons
● To lock operation [Adjustment Lock]
This function locks the buttons to retain the status adjusted or set once.
Buttons that can be
locked
•
Buttons that cannot
be locked
•
•
•
•
•
(1) Press
(2) Press
(Enter button) Adjustments/settings using
Adjustment menu
/
(Control buttons)
(Volume control button)
(Input Signal Selection button)
(Mode button)
(Power button)
to turn off the unit.
again while pressing
.
The screen is displayed with the adjustment lock.
[Unlocking]
to turn off the unit.
(1) Press
(2) Press
again while pressing
.
The screen is displayed with the adjustment lock released.
18
Chapter 2 Settings and Adjustments
NOTE
• The logo appears with the default
setting.
2-7 Setting Adjustment Menu Position
● To adjust the menu position [Menu Position]
Adjust the menu position using the following procedure.
NOTE
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Menu Position> from the <Others> menu, and press
.
The <Menu Position> menu appears.
(3) Select a menu position with
or
The menu position setting is completed.
, and press
• Five positions (center/ upper right/
lower right/ upper left/ lower left) can
be selected.
.
2-8 Viewing Information/Setting Language
● To check settings, usage time, etc. [Information]
NOTE
• The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
This function allows you to check settings, model name, serial number, and
usage time of the monitor.
(1) Choose <Information> from the Adjustment menu, and press
.
The <Information> menu appears.
(2) Then, press
to check settings, etc.
● To set a language to be displayed [Language]
Select the Adjustment menu language.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Simplified Chinese/
Traditional Chinese/Japanese
.
(1) Choose <Language> menu from the Adjustment menu, and press
The <Language> menu appears.
(2) Choose a language with
or
The language setting is completed.
, and press
.
2-9 Setting BrightRegulator
● To set automatic brightness adjustment [BrightRegulator]
The sensor on the front side of the monitor detects the environmental brightness
to adjust the screen brightness automatically and comfortably.
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose < BrightRegulator> from the <Others> menu, and press
The BrightRegulator setting window appears.
(3) Select “Enable” or “Disable” with
The BrightRegulator setting is completed.
or
, and press
.
.
Chapter 2 Settings and Adjustments
19
2-10 Resumption of Default Setting
● To reset color adjustment [Reset]
NOTE
The hue in the color mode currently set will revert to the default settings (factory
settings).
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Reset> from the <Color> menu and press
.
.
The <Reset> menu appears.
(3) Select <Reset> with
or
The reset operation is completed.
, and press
.
● To reset all settings [Reset]
Reset all adjustments/settings to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Reset> from the <Others> menu, and press
.
The <Reset> menu appears.
(3) Select <Reset> with
or
The reset operation is completed.
20
, and press
Chapter 2 Settings and Adjustments
.
.
• For default settings, refer to “Main
default settings (factory settings)” on
page 27.
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-D and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
D-sub mini
DVI-D connector 15-pin Connector
Attention
• The touch panel monitor is designed
to use connecting to one PC. If
connecting two PCs, connect the
touch panel monitor to one PC only
(touch operation side) with a USB
cable (MD-C93) or RC-232C cable
(FD-C38-K).
To PC 2
To PC 1
DVI-D connector
D-sub mini 15-pin
Connector
Signal cable (Digital)
FD-C39 (supplied)
Signal cable
MD-C87 (supplied)
Selecting input signal
Input Signal Selection button
Switch the input signal with
. Input signal switches each time
is pressed.
When the signal is switched, the active signal type (Analog or Digital) appears
at the top right corner of the screen for three seconds.
● To set input signal selection [Input Signal]
Setting
Function
Auto
When PC displayed on the monitor is turned off or
enters the power-saving mode, the monitor automatically
displays signals of another PC.
Manual
The monitor does not detect the PC’s signals
automatically. Select an input signal with .
[Procedure]
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Input Signal> from the <Others> menu, and press
The <Input Signal> menu appears.
(3) Select “Auto” or “Manual” with
or
, and press
.
.
The Input Priority setting is completed.
Chapter 3 Connecting Cables
21
Chapter 4 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
• No-picture problems → See No.1 - No.2.
• Imaging problems → See No.3 - No.11.
• Other problems → See No.12 - No.13.
• Touch panel problems → See No.14 - No.17.
Problems
1. No picture
• Power indicator does not light.
Possible cause and remedy
• Check whether the power cord is connected correctly.
• Press .
• Power indicator is lighting blue.
• Set each RGB adjusting value in <Gain> to higher level.
(page 16)
• Power indicator is lighting orange.
• Switch the input signal with .
• Operate the mouse or keyboard.
• Turn on the PC.
2. The message below appears.
This message appears when the signal is not input
correctly even when the monitor functions properly.
• This message appears when no signal is input.
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• Switch the input signal with .
• The message below shows that the input signal is
out of the specified frequency range. (Such signal
frequency is displayed in red.)
Example:
• Select an appropriate display mode using the graphics
board’s utility software. Refer to the manual of the
graphics board for details.
3.
Display position is incorrect.
• Adjust image position so that it is displayed properly
within the display area using the <Hor.Position> and
<Ver.Position> adjustment.
• If the problem persists, use the graphics board’s utility
software if available to change the display position.
4. Vertical bars appear on the screen or a part of the
image is flickering.
• Adjust using <Clock>.
5. Whole screen is flickering or blurring.
• Adjust using <Phase>.
6. Characters are blurred.
• Adjust using <Smoothing>.
7. The screen is too bright or too dark.
• Adjust <Brightness>. (The LCD monitor backlight has a
fixed life span. When the screen becomes dark or begins
to flicker, contact your local dealer.)
22
Chapter 4 Troubleshooting
Problems
8. Afterimages appear.
Possible cause and remedy
• Use a screen saver or off timer function for a long-time
image display.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
9. Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a
on the screen.
failure.
10. The display image is appeared in lengthwise.
• Check whether the kind of cables connected with the
monitor and the PC. (Connect the monitor and cables
correctly by referring to “Connecting Cables” in Setup
Manual (page 3).)
11. The Main menu of Adjustment menu does not start. • Check for Adjustment Lock function.
• Check whether the FineContrast menu is running. (Refer
to “1-3Functions and Basic Operation” on page 9.)
12. The auto-adjustment function does not work
correctly.
• This function does not work when digital signal is input.
• This function works correctly when an image is fully
displayed over the display area.
It does not work properly when an image is displayed
only on a part of the screen (DOS prompt window, for
example) or when a black background (wallpaper, etc.) is
in use.
This function does not work correctly with some graphics
boards.
13. No audio output
• Check whether volume is set to “0”.
• Check the settings of the PC and the audio playback
software.
Touch panel problems
Problems
Possible cause and remedy
14. Cursor position is not correct. / Cursor jumps.
• Turn off and on the monitor. If the symptom is not
improved, perform the calibration on the monitor.
• Touch with one finger only.
• Connect the monitor to the PC with the cable indicated
in the Setup Manual or User’s Manual of the monitor.
Using a conversion adapter, the touch panel may not
operate properly.
15. Touch operation is not effective.
• Check whether “Use EEPROM” in the “Device” menu
is not checked in the “Properties” settings of the touch
panel driver. If the check is already applied, perform the
calibration.
• Other login user may have changed the setting. Set the
touch panel driver again.
• Restart “DMC Touch Panel Configuration”, or reboot the
PC.
16. Some deflection may appear on the surface of
touch panel portion.
• Due to the touch panel structural characteristics, the
deflection may occur on the touch panel surface in high
temperature/high humidity operating environment.
This is not a trouble.
17. No touch-sound.
• The touch-sound may not be output from the external line
out of the PC depending on the hardware configuration.
• Under Windows 7, touch-sound is only output through
the audio output terminal of the PC. To hear touchsound, connect speakers.
Chapter 4 Troubleshooting
23
Chapter 5 Reference
5-1 Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor.
[Attaching]
1 Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
2 Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the
screwdriver.
3 Attach the monitor to the arm or stand.
Secure the monitor to the arm or stand using the screws specified in the
user’s manual of the arm or stand.
• Clearance between the screw holes when attach an arm or stand:
In case of 75mm × 75mm
• Clearance between the screw holes when attach an arm or stand:
In case of 100mm × 100mm
24
Chapter 5 Reference
Attention
• When attaching an arm or stand,
follow the instructions of their user’s
manual.
• When using another manufacturer’s
arm or stand, confirm the following in
advance and select one conforming to
the VESA standard. Use M4 × 12 mm
screws supplied with the monitor.
– Clearance between the screw holes:
75 mm × 75 mm or
100 mm × 100 mm
–Thickness of plate: 2.6 mm
–Strong enough to support weight of
the monitor unit (except the stand)
and attachments such as cables.
• When using an arm or stand, attach it
to meet the following tilt angles of the
monitor.
–Up 45 degrees, down 0 degrees
(horizontal display)
• Connect the cables after attaching an
arm.
5-2 Power Saving Mode
Analog input
This monitor complies with the VESA DPM standard.
[Power Saving System]
PC
Operating
Power saving
Power
Indicator
Monitor
STAND-BY
SUSPENDED
OFF
Operating
Blue
Power saving
Orange
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen.
Attention
• Unplugging the power cord
completely shuts off power supply to
the monitor.
• Do not setup Standby function for the
PC. When the PC is under the standby
status, the monitor is not resumed by
the touch operation.
• When the monitor is not resumed
by the touch operation, operate the
mouse or keyboard.
Digital input
This monitor complies with the DVI DMPM standard.
[Power Saving System]
The monitor enters the power saving mode in five seconds in connection with
the PC setting.
PC
Monitor
Power Indicator
Operating
Operating
Blue
Power saving
Power saving
Orange
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen.
Chapter 5 Reference
25
5-3 Specifications
LCD Panel
15-inch (38 cm) TFT color LCD with anti-glare hard coating
Viewing angle: Horizontal 160°, Vertical 130° (CR: 10 or more)
Dot Pitch
0.297 mm
Horizontal Scan Frequency
Analog: 24.8 - 60 kHz
Digital: 31 - 49 kHz
Vertical Scan Frequency
Analog: 55 - 75 Hz (Non-interlace)
Digital: 59 - 61 Hz, (VGA Text: 69 - 71 Hz) (Non-interlace)
Resolution
1024 dots × 768 lines
Max. Dot Clock
Analog: 80 MHz
Digital: 65 MHz
Max. Display Colors
Approx. 16.19 million colors
Display Area (H × V)
304.1 mm × 228.1 mm
Touch Panel
OS
Microsoft Windows 7 Service Pack 1 (32 bit/64 bit)
Microsoft Windows Vista Service Pack 2 (32 bit)
Microsoft Windows XP Service Pack 3 (32 bit)
(Not compatible with Mac OS)
Communication
protocol
RS-232C serial (T1501-B)/USB serial (T1502-B)
Detective method
Analog resistive technology
Power Supply
100 - 120 VAC ±10% 50/60 Hz, 0.5 A
200 - 240 VAC ±10% 50/60 Hz, 0.3 A
Power Consumption
Maximum (usually): 21 W (speaker not working)/25 W (speaker working)
Power saving mode: 1 W or less (for single signal input without USB, and no line
input connector connected)
Power switch Off: 1 W or less
Input Signal Connectors
DVI-D connector, D-sub mini 15-pin connector
Analog Input Signal (Sync)
H/V Separate, TTL, Positive/Negative
Analog Input Signal (Video)
0.7 Vp-p/75 Ω Positive
Digital Signal Transmission System
TMDS (Single Link)
Video Signal Memory
Analog Signal: 18 (preset: 13)
Audio output
Speaker output: 0.5 W + 0.5 W (8 Ω, THD: 10% or less)
Headphone output: 2mW + 2mW
Line input
Input impedance 47 kΩ (typ.)
Input level: 1.0 Vrms (Max.)
Plug & Play
VESA DDC 2B/EDID structure 1.3
Dimensions (Main unit)
346 mm (W) × 379.5 mm (H) × 175 mm (D)
(13.6” (W) × 14.9” (H) × 6.9” (D))
Dimensions (without stand)
346 mm (W) × 280 mm (H) × 69 mm (D) (13.6” (W) × 11.0” (H) × 2.7” (D))
Weight (Main unit)
Approx. 6.1 kg (13.4 lbs)
Weight (without stand)
Approx. 4.1 kg (9.0 lbs)
Environmental
Conditions
Temperature
Operating temperature: 0 °C - 35 °C
Storage temperature: –20 °C - 60 °C
Humidity
Operating humidity: 20% - 80% R.H. (no condensation)
Storage humidity: 10% - 80% R.H. (no condensation)
Pressure
Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
26
Chapter 5 Reference
Main default settings (factory settings)
BrightRegulator
Disable
Smoothing
3
FineContrast Mode
Custom
Input Signal
Auto
Off Timer
Disable
Language
English
Outside Dimensions
unit : mm (inch)
313(12.3)
81(3.19)
35°
35°
SWIVEL
TILT 3
0°
69(2.72)
38.5
(1.52)
100(3.9)
90(3.54)
65.5(2.58)
419.5(16.5)
123(4.8)
99.5(3.56)
229.3(9)
280(11)
379.5(14.9)
100(3.9)
90(3.54)
123(4.8)
119(4.7)
346(13.6)
305.4(12)
200(7.9)
175(6.9)
217(8.5)
43.5
(1.71)
Chapter 5 Reference
27
Connector Pin Assignment
• DVI-D connector
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
TMDS Data 2-
9
TMDS Data1-
17
TMDS Data 0-
2
TMDS Data 2+
10
TMDS Data1+
18
TMDS Data 0+
3
TMDS Data2/4 Shield
11
TMDS Data1/3 Shield
19
TMDS Data 0/5 Shield
4
NC*
12
NC*
20
NC*
5
NC*
13
NC*
21
NC*
6
DDC Clock (SCL)
14
+5V Power
22
TMDS Clock shield
7
DDC Data (SDA)
15
Ground (return for +5V,
Hsync and Vsync)
23
TMDS Clock+
8
NC*
16
Hot Plug Detect
24
TMDS Clock(NC*: No Connection)
• D-sub mini 15-pin connector
3
4
5
10
9
1
2
8
7
6
14 13 12 11
15
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
Red
6
Red ground
11
NC*
2
Green
7
Green ground
12
Data (SDA)
3
Blue
8
Blue ground
13
H. Sync
4
NC*
9
NC*
14
V. Sync
5
Ground
10
Ground
15
Clock (SCL)
(NC*: No Connection)
• RS-232C port (Mini DIN 6 pin) (T1501-B)
Pin No.
5
6
4
3
2
1
Signal
1
TXD
2
CTS
3
RTS
4
GND
5
RXD
6
GND
• USB port (T1502-B)
Upstream
Contact No.
Signal
VCC
Cable power
2
– Data
Serial data
3
+ Data
Serial data
4
Ground
Cable ground
Option List
Cleaning Kit
EIZO ScreenCleaner
Touch Panel Pointer
TP1
28
Chapter 5 Reference
Remarks
1
5-4 Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in
use, when the analog input signal is converted to a digital signal for image display.
This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. One is
a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and analog signal
inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and “Active Off
(power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light
passing through the panel color filter. Red, green and blue are the three primary colors. All the colors on the screen
are displayed by combining these three colors. The color tone can be changed by adjusting the light intensity (volume)
passing through each color’s filter.
Gamma
Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma Characteristic”.
A small gamma value produces a low-contrast image, while a large gamma value produces a high-contrast image.
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to
adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation. It is recommended that range
adjustment be made before color adjustment.
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. The display
panel of this monitor consists of 1024 horizontal pixels and 768 vertical pixels. At a resolution of 1024 x 768, images
are displayed as a full screen (1:1).
sRGB (Standard RGB)
International standard for “color reproduction and color space” among peripheral devices (such as monitors, printers,
digital cameras, scanners). sRGB allows Internet users to closely match colors as a simple color matching means for
the Internet use.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen
becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature.
5000K: Slightly reddish white
6500K: Warm white like paper white
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
A signal transmission system for digital interface.
VESA DPM (Video Electronics Standards Association - Display Power Management)
VESA provides the standardization of signals from PC (graphics board) for power saving of PC monitors. DPM
defines the signal status between PC and monitor.
Chapter 5 Reference
29
5-5 Preset Timing
The following table shows factory preset video timing (for analog signal only).
Mode
Dot clock
VGA 640×480@60Hz
25.2 MHz
VGA TEXT 720×
400@70Hz
28.3 MHz
PC-9801 640×400@56Hz
21.1 MHz
PC-9821 640×400@70Hz
25.2 MHz
VESA 640×480@72Hz
31.5 MHz
VESA 640×480@75Hz
31.5 MHz
VESA 800×600@56Hz
36.0 MHz
VESA 800×600@60Hz
40.0 MHz
VESA 800×600@72Hz
50.0 MHz
VESA 800×600@75Hz
49.5 MHz
VESA 1024×768@60Hz
65.0 MHz
VESA 1024×768@70Hz
75.0 MHz
VESA 1024×768@75Hz
78.8 MHz
30
Chapter 5 Reference
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Frequency
Horizontal: kHz
Vertical: Hz
31.47
59.94
31.47
70.09
24.83
56.42
31.48
70.10
37.86
72.81
37.50
75.00
35.16
56.25
37.88
60.32
48.08
72.19
46.88
75.00
48.36
60.00
56.48
70.07
60.02
75.03
Polarity
Negative
Negative
Negative
Positive
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Negative
Negative
Negative
Negative
Positive
Positive
Attention
• Display position may be deviated
depending on the PC connected,
which may require screen adjustment
using Adjustment menu.
• If a signal other than those listed in
the table is input, adjust the screen
using the Adjustment menu. However,
screen display may still be incorrect
even after the adjustment.
• When interlace signals are used, the
screen cannot be displayed correctly
even after screen adjustment using the
Adjustment menu.
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: FlexScan T1501-B/T1502-B
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
*
*
*
*
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the
limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (enclosed)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
31
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a)Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät
und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der
zugehörenden Bedienungsanleitung angegeben.
b)Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher
als die Augenhöhe eines Benutzers in sitzender Position ist.
c)Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der
Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt.
d)Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach
hinten ≥ 5°).
e)Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale
Kraftaufwand dafür muß weniger als 100 N betragen.
f)Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g)Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h)Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position
kippsicher sein.
„Maschinenlärminformations-Verordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“
Nicht für Bildschirm - Arbeitsplätze geeignet
32
5th Edition-November, 2012
Copyright © 2009-2012 EIZO NANAO CORPORATION All rights reserved.
03V22645E1
(U.M-T1501-B)