U
BLU-RAY DISC PLAYER
BD-S667
OWNER’S MANUAL
USB
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for future reference.
1
2
3
4
5
6
7
8
9
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10
11
12
13
14
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING:
CAUTION
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
• DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
• USE ONLY THE RECOMMENDED
ACCESSORIES.
• DO NOT REMOVE THE COVER (OR BACK);
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The socket outlet shall be installed near the equipment and easily
accessible. The mains plug of the power supply cord shall remain
readily operable.
To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from AC receptacle.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC SHOCK OR FIRE
HAZARD DUE TO OVERHEATING, ENSURE THAT
CURTAINS AND ANY OTHER MATERIALS DO NOT
OBSTRUCT THE VENTILATION VENTS.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Caution-i En
The exclamation point within an equilateral
triangle is intended to alert the user to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void
your authority, granted by the FCC, to use the product.
2 IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow
all installation instructions. Failure to follow instructions
could void your FCC authorization to use this product in the
USA.
3 NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will not
result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the
users manual, may cause interference harmful to the
operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., USA 6660 Orangethorpe Ave., Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party:
Address:
Yamaha Electronics Corporation, USA
6660 Orangethorpe Avenue
Buena Park, CA 90620
Telephone:
714-522-9105
1-800-492-6242 (toll free)
Fax:
714-228-3390
Type of Equipment: Blu-ray Disc Player
Model Name:
BD-S667
• This device complies with Part 15 of the FCC Rules.
• Operation is subject to the following conditions:
– This device may not cause harmful interference.
– This device must accept any interference received including
interference that may cause undesired operation.
See the “Troubleshooting” section at the end of this manual if
interference to radio reception is suspected.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying
blaring or distortion - and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic
Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive
volume levels.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
Caution-ii En
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
3
4
5
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this sound system in a well ventilated, cool, dry, clean
place-away from direct sunlight, heat sources, vibration, dust,
moisture, and/or cold. For proper ventilation, allow the
following minimum clearances.
Top : 10 cm (4 in)
Rear: 10 cm (4 in)
Side: 10 cm (4 in)
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
Avoid installing this unit where foreign object may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
6
7
8
9
10
11
12
13
14
15
16
17
Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
Do not plug in this unit to a wall outlet until all connections
are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and
may cause fire, damage to this unit, and/or personal injury.
Yamaha will not be held responsible for any damage resulting
from use of this unit with a voltage other than specified.
To prevent damage by lightning, keep the power cable
disconnected from a wall outlet or this unit during a lightning
storm.
Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit is
faulty.
Before moving this unit, press p to set this unit to the
standby mode, and disconnect the AC power plug from the
wall outlet.
Caution-iii En
18 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the
outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may become
warm. Turn the power off, then leave this unit alone for
cooling.
20 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
This unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off by p. This state is called the
standby mode. In this state, this unit is designed to
consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
The laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
PRODUIT LASER DE CLASSE 1
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
PRODUIT LASER DE CLASSE 1
CONTENTS
1. INTRODUCTION
1
4. SETTINGS
WHAT YOU CAN DO WITH THIS PLAYER........ 2
SUPPLIED PARTS .............................................. 2
ABOUT DISCS AND FILES................................. 3
Types of discs/files that can be used with this player..... 3
Disc precautions ............................................................. 4
Loading a disc................................................................. 4
CONTROLS AND FUNCTIONS .......................... 5
Front panel...................................................................... 5
Remote control ............................................................... 6
SETUP MENU .................................................... 26
Example of SETUP menu operation............................. 27
General Setting.............................................................. 28
Display Setting.............................................................. 30
Audio Setting ................................................................ 31
System Information....................................................... 31
About the audio output formats .................................... 32
About the video output formats .................................... 32
SOFTWARE UPGRADE .................................... 34
2
3
4
Upgrading the software ................................................. 34
2. CONNECTION
INTRODUCTION TO CONNECTIONS ................ 8
5
5. ADDITIONAL INFORMATION
Rear panel ....................................................................... 8
TROUBLESHOOTING ....................................... 35
HDMI CONNECTION ......................................... 10
Power ............................................................................ 35
Basic operation.............................................................. 35
Disc playback................................................................ 35
Picture ........................................................................... 35
Sound ............................................................................ 36
Network......................................................................... 36
Messages on the screen ................................................. 36
Connecting to the HDMI terminal................................ 10
VIDEO CONNECTIONS .................................... 11
Connecting to the component/video jack ..................... 11
AUDIO CONNECTIONS .................................... 12
Connecting to the digital audio jack/terminal............... 12
Connecting to the audio jacks....................................... 13
NETWORK AND USB CONNECTION .............. 14
Connecting to the NETWORK terminal and USB/BD
STORAGE terminal................................................. 14
OTHER CONNECTIONS ................................... 15
Connecting to the REMOTE CONTROL jacks ........... 15
Connecting the power cable ......................................... 15
GLOSSARY ....................................................... 37
SPECIFICATIONS ............................................. 38
General .......................................................................... 38
Audio performance ....................................................... 38
Input/output................................................................... 38
Copyright ...................................................................... 39
About fonts.....................................................................39
3. PLAYBACK
INITIAL WIZARD/EASY SETUP........................ 16
Setting with the Initial Wizard/Easy Setup................... 16
HOME MENU ..................................................... 17
Playing back photo/music/video................................... 17
Using network content.................................................. 19
PLAYING VIDEOS FROM NETFLIX ................. 20
Checking the activation code........................................
Preparing for watching video on your computer ..........
Playing the video ..........................................................
Operations for watching videos....................................
20
20
20
21
ADVANCED PLAYBACK OPERATION............ 22
On Screen menu............................................................
Status menu...................................................................
Using Bookmark...........................................................
Program play.................................................................
Using search .................................................................
Enjoying BONUSVIEW and BD-Live.........................
Using Picture in Picture function
(secondary audio/video playback) ...........................
Using the feature of BD-Live .......................................
22
23
24
24
24
25
25
25
■ About this manual
– This manual describes how to operate this Player
using a remote control except when it is not
available. Some of these operations are also
available using the front panel buttons.
– Notes contain important information about safety
and operating instructions. Hint(s) indicates a tip for
your operation.
– This manual is printed prior to production. Design
and specifications are subject to change in part as a
result of improvements, etc. In case of differences
between the manual and the product, the product has
priority.
The icons used in this manual
Icons are used to indicate available buttons/functions for a
particular format.
English
BD : BD-Video
DVD : DVD-Video, DVD-VR, DVD+VR
CD : Audio CD
MUSIC : MP3, WMA
VIDEO : AVCHD, WMV
PHOTO : JPEG
1 En
INTRODUCTION
WHAT YOU CAN DO WITH THIS PLAYER
\
p. 16
\
p. 22
\
p. 25
\
p. 17
Play back Video, Music, Photo files on a disc/USB memory device* \
p. 17
Easy setting for language, resolution, screen aspect ratio
You can perform language and TV settings.
Play back commercially-released BD/DVD/CD discs*
In addition to BD discs, this Player also supports playback of a variety of other discs.
Play back BONUSVIEW, BD-Live, etc.*
You can enjoy additional movies on the latest BD discs.
Play back Video, Music, Photo files on a disc*
This Player can play back discs you recorded.
Files recorded on discs/USB memory devices can be played back with this Player.
Play back Video, Music, Photo files on a Home Network Server* **
\
p. 19
\
p. 20
\
p. 28
PC contents can be played back with TV or AV receiver by connecting this Player to a network
server.
Streaming Playback contents on the Netflix**
You can instantly enjoy movies and TV programs over the internet with this Player.
Operation with the remote control of TV, AV receiver, etc.
Connecting devices with an HDMI cable, you can control devices with a single remote control
using the HDMI Control function.
* For details on playable disc and format, see page 3.
** Network setting is needed to use this function.
SUPPLIED PARTS
Make sure the following accessories are provided with the product.
Remote control
TRANSMIT
MARKER SETUP
A
B
C
CLEAR
SEARCH
PROGRAM
DIGEST
PIP
2ND
AUDIO
D
REPEAT
HOME
TOP
MENU
A B
POP-UP
MENU
ENTER
ON
SCREEN
RETURN
SUBTITLE
ANGLE
STATUS
2 En
ZOOM
AUDIO
Batteries (×2)
(AAA, R03, UM-4)
Audio/Video cable
Power cable
1
ABOUT DISCS AND FILES
– 12 cm (5”) and 8 cm (3”) discs can be played back in
this Player. Do not use an 8 cm (3”) to 12 cm (5”)
adapter.
– Use discs that conform to compatible standards as
indicated by the presence of official logos on the
disc label. Playback of discs not complying with
these standards is not guaranteed. In addition, the
image quality or sound quality is not guaranteed
even if the discs can be played back.
Recording
Format
Disc Type
BD-Video
--
DVD-ROM
DVD-Video
-WMV/MP3/WMA/
JPEG
DVD+R/DVD+R
DL/DVD+RW
DVD-Video/
DVD+VR/AVCHD/
Data Disc
WMV/MP3/WMA/
JPEG
CD-ROM
CDDA/HDCD
--
CD-R/CD-RW
CDDA/Data Disc
WMV/MP3/WMA/
JPEG
USB
--
WMV/MP3/WMA/
JPEG
Network
--
WMV/MP3/WMA/
JPEG
Region management information
BD-Video
Region code “A” or
“ALL”
DVD-Video
Region number “1”
or “ALL”
1
Asia
Region code “A” or
“ALL”
Region code “A” or
“ALL”
Region code “B” or
“ALL”
ALL
Region number “4”
or “ALL”
4
Europe
ALL
Region number “3”
or “ALL”
3
Central and South
America
BD-Video
Region code “B” or
“ALL”
ALL
Region number “2”
or “ALL”
Russia
Region code “C” or
“ALL”
Region number “5”
or “ALL”
5
Region code “C” or
“ALL”
ALL
ALL
Region number “6”
or “ALL”
ALL
– BD/DVD video players and discs have region codes,
which dictate the regions in which a disc can be
played.
– BD/DVD Video operations and functions may be
different from the explanations in this manual and
some operations may be prohibited due to disc
manufacturer’s settings.
– If a menu screen or operating instructions are
displayed during playback of a disc, follow the
operating procedure displayed.
Notes
– Playback for some of the discs in the left side
column tables may not be possible depending on the
disc.
– Finalize all recording media that is played back in
this player.
– “Finalize” refers to a recorder processing a recorded
disc so that it will play in other players/recorders as
well as this Player. Only finalized discs will play
back in this Player. (This Player does not have a
function to finalize discs.)
– Playback of all files on the disc, USB memory
device and network is not guaranteed.
MP3/WMA audio file requirement
– Sampling frequency: within 32 - 48 kHz
– Bitrate: within 8 - 320 kbps (MP3), 32 - 192 kbps
(WMA)
WMV file requirement
– WMV9, maximum resolution is 1,920 × 1,080.
English
2
DVD-Video
Region number “4”
or “ALL”
4
China
DVD-R/DVD-R DL/ DVD-Video/DVDDVD-RW
VR/AVCHD/Data
Disc
U.S.A. and Canada
Australia
Data Format
BD-ROM/BD-R/
BD-RE
Destination
Region management information
Destination
INTRODUCTION
■ Types of discs/files that can be
used with this player
ALL
3 En
ABOUT DISCS AND FILES
■ Disc precautions
Be careful of scratches and dust
– BD, DVD and CD discs are sensitive to dust,
fingerprints and especially scratches. A scratched
disc may not be able to be played back. Handle discs
with care and store them in a safe place.
■ Loading a disc
– Insert the disc with the label face up.
– In case of the disc recorded on both sides, face down
the side to play back.
Proper disc storage
Notes
Place the disc in the center of the disc case
and store the case and disc upright.
Avoid storing discs in locations subject to
direct sunlight, close to heating appliances
or in locations of high humidity.
Do not drop discs or subject them to
strong vibrations or impacts.
Avoid storing discs in locations where
there are large amounts of dust or
moisture.
Handling precautions
– If the surface is soiled, wipe gently with a
soft, damp (water only) cloth. When
wiping discs, always move the cloth from
the center hole toward the outer edge.
– Do not use record cleaning sprays,
benzene, thinner, static electricity
prevention liquids or any other solvent.
– Do not touch the surface.
– Do not stick paper or adhesive labels to the disc.
– If the playing surface of a disc is soiled or scratched,
the Player may decide that the disc is incompatible
and eject the disc tray, or it may fail to play the disc
correctly. Wipe any dirt off the playing surface with
a soft cloth.
Cleaning the pick up lens
– Never use commercially available cleaning discs.
The use of these discs can damage the lens.
– Request the nearest service center approved by
Yamaha to clean the lens.
4 En
– Playback may begin automatically, depending on the
disc and setting of this Player.
– The menu may be displayed first, depending on the
disc.
– The disc load time may vary depending on the disc.
1
CONTROLS AND FUNCTIONS
INTRODUCTION
■ Front panel
USB
1 2
3
4
1 p (On/Standby)
5
6 7 8
4 Front panel display
8
(Search forward/Skip forward):
Press to skip forward, and press and hold to search
forward.
9
(Eject) (p. 4)
Loading the batteries in the remote
control
(Play)
0
(Pause)
A
(Stop)
Approximate operating range of
remote control
3
2
1
Remote control sensor
USB
30˚
Notes
30˚
6 m (20 ft)
TRANSMIT
MARKER SETUP
A
B
C
CLEAR
2ND
AUDIO
D
SEARCH
PROGRAM
DIGEST
PIP
REPEAT
HOME
TOP
MENU
A B
POP-UP
MENU
ENTER
ON
SCREEN
RETURN
SUBTITLE
ANGLE
ZOOM
AUDIO
STATUS
English
– Do not subject the remote control unit to shock,
water or excessive humidity.
– The remote control unit may not function if the
Player’s remote sensor is in direct sunlight or any
other strong light.
– Incorrect use of batteries may cause them to leak or
burst. Read the battery warnings and use the
batteries properly.
– Do not mix old and new batteries, or mix different
brands.
– Remove the batteries if you will not use the remote
control unit for an extended period of time.
– Dispose of batteries according to your regional
regulations.
A
(Search backward/Skip backward):
Press to skip backward, and press and hold to search
backward.
5 Disc tray (p. 4)
6
0
7
2 USB port (p. 14)
3 Indicator: Lights up while this Player is starting up.
9
5 En
CONTROLS AND FUNCTIONS
■ Remote control
1
2
3
4
5
6 Number buttons: Enters numbers, or during
playback, jumps to the track/chapter corresponding to
the number you input.
R
Q
TRANSMIT
MARKER SETUP
A
B
C
D
7 CLEAR: Clears entered number/set item.
8 PROGRAM CD DVD : Sets the order of playback
(p. 24). You can set up to 15 tracks (for Audio CD) or
titles/chapters (DVD-Video).
9 PIP BD : Turns on/off the Picture in Picture (p. 25).
PIP Mark (
) is displayed on the screen when this
function is available. You can also select this item from
On Screen menu (p. 22).
6
7
8
9
0
A
B
CLEAR
PROGRAM
DIGEST
PIP
2ND
AUDIO
REPEAT
HOME
TOP
MENU
C
D
E
F
SEARCH
P
O
N
A B
M
POP-UP
MENU
L
ENTER
ON
SCREEN
RETURN
SUBTITLE
ANGLE
ZOOM
AUDIO
K
J
I
Note
– PIP Mark is displayed only when the PIP Mark is set
to on (p. 29).
0 2ND AUDIO BD : Turns on/off the secondary audio
of the Picture in Picture (p. 25) or audio
commentaries. The Secondary Audio Mark (
) is
displayed on the screen when this function is
available. You can also select this item from On
Screen menu (p. 22).
Note
– Secondary Audio Mark is displayed only when
Secondary Audio Mark is set to on (p. 29).
A HOME: Displays the HOME menu screen (p. 17).
G
STATUS
H
B TOP MENU BD DVD : Displays the top menu
screen (p. 38) if the disc contains a menu. Select the
desired item using 5/a /2/3 and ENTER.
Note
– Specific operations may be different depending on
the disc. Follow the instructions of each menu
screen.
Note
–
will appear on the top left corner of the screen
when the pressed button is not available.
1 Infrared signal transmitter: Outputs infrared
signal. Aim this window to the remote control sensor
(p. 5).
2 TRANSMIT: Flashes while the remote control is
sending infrared signal.
3 MARKER DVD VIDEO : Sets Bookmark (p. 24) at
a specified point of a movie. After Bookmark is set,
you can jump to the point you set using this function.
You can set up to 12 Bookmarks.
4
: Opens/closes the disc tray.
5 Color buttons BD : Use these buttons according to
on-screen instructions.
6 En
C Cursor buttons (5/a /2/3): Moves the focus in
the menu screen.
ENTER: Selects the focused menu/item.
D RETURN: Returns to the previous menu or screen,
etc.
E ANGLE BD DVD : Changes the camera angle if
video is recorded with multiple angles. The Angle
Mark (
) is displayed on the screen when this
function is available. You can also select this item
from On Screen menu (p. 22).
Note
– Angle Mark is displayed only when the Angle Mark
is set to on (p. 29).
F SUBTITLE BD DVD VIDEO : Changes subtitle
languages (p. 38) if available . You can also select this
item from On Screen menu (p. 22).
CONTROLS AND FUNCTIONS
G Control buttons
BD
DVD
CD
VIDEO
MUSIC
PHOTO
: Stops playback. To stop playback completely,
press this button twice.
: Pauses playback.
: Plays back contents.
/
: Skips backward/forward.
: Repeats the title being played back.
: Repeats the chapter being played back.
: Repeats all tracks/files on the disc/folder.
: Repeats the track/file being played back.
1
INTRODUCTION
/
: Searches backward/forward. The search
speed will change each time you press the button
(search backward/forward: 5 steps each). Press
to
resume normal playback.
( )/ ( ) BD DVD : Performs slow
backward/forward. Slow playback speed will change
each time you press the button (slow backward/
forward: 4 steps each).
These buttons also perform frame advance/reverse
playback during pause.
Press
to resume normal playback.
N REPEAT BD DVD CD VIDEO MUSIC :
Changes repeat mode. Repeat mode shown below will
change each time you press the button.
O DIGEST PHOTO : Shows 12 photo thumbnails.
When thumbnails are displayed, you can proceed to
the next/previous page with
/
.
P SEARCH BD DVD CD VIDEO MUSIC :
Jumps to a specified point during playback. For details
on this function, refer to “Using search” (p. 24). You
can also select this item from status menu (p. 23).
Q p: Turns this Player on or sets it to the standby mode.
R SETUP: Displays SETUP menu screen (p. 26).
Notes
– Some BD/DVD discs are not compatible with frame
advance/reverse playback.
– The Player resumes playback from the point that
where the Player was previously stopped. To play
back from the beginning, press
and then
.
H STATUS: Displays the playback information (p. 23).
I AUDIO BD DVD : Changes the audio language or
format. You can also select this item from On Screen
menu (p. 22).
J ZOOM DVD VIDEO PHOTO : Zooms in/out.
The size of the screen will change each time you press
the button (zoom in/out: 3 steps each).
K ON SCREEN: Displays On Screen menu (p. 22).
L POP-UP MENU BD DVD : Displays pop-up
menu. The menu contents displayed vary depending
on the disc. For details on how to see and operate the
pop-up menu, refer to the manual for the disc.
The top menu screen may be displayed by pressing
POP-UP MENU depending on the DVD.
M A/B BD DVD CD VIDEO MUSIC :
Plays back a specific part you want to repeat.
1 Press A/B at the scene where you want to set the
start point. “A-” is displayed on the screen.
2 Press A/B again at the scene where you want to set
the end point. “A-B” is displayed on the screen.
Repeat playback starts.
English
3 To cancel the repeat playback, press A/B. “A-B”
disappears and the repeat playback is finished.
Note
– This function cannot be performed depending on the
specifications of the disc.
7 En
CONNECTION
INTRODUCTION TO CONNECTIONS
Find the corresponding connection method on your video/audio equipment. We recommend that you use the HDMI
terminal which provides high quality digital audio and video on a single connection. If you use the other terminals/jacks,
connect the video first. Then connect the audio.
Connect video and audio to AV
receiver with HDMI cable.
HDMI terminal on
AV receiver? *
HDMI terminal on TV?
Refer to owner’s manual
of AV receiver.
HDMI terminal on TV?
START
Connect video to TV with HDMI cable.
Use AV receiver?
Connect video to AV receiver.
HDMI terminal on TV?
Connect video and audio to TV with HDMI cable.
Connect video to TV.
Yes
* When you connect to an AV receiver that cannot output the sound
input via its HDMI terminal, refer to the owner’s manual of your AV
receiver.
No
■ Rear panel
1 2
DIGITAL OUT
AUDIO OUT
COAXIAL
L
3
4
5
HDMI
NETWORK
VIDEO OUT
COMPONENT
Y
PB
OUT
OPTICAL
0
8 En
R
VIDEO
9
PR
IN
USB BD STORAGE
REMOTE CONTROL
8
7
6
2
CONNECTION
Video and audio connection to
AV receiver
A HDMI (p. 10)
Video connection
Audio connection to AV receiver
to TV
A’ HDMI (p. 10)
Connect audio to AV
receiver.
D COAXIAL (p. 12)
or
to AV receiver
E
B COMPONENT (p. 11)
OPTICAL (p. 12)
or
or
F L/R (p. 13)
C VIDEO (p. 11)
Video and audio connection to TV
A’ HDMI (p. 10)
Audio connection to TV
Video connection to TV
Connect audio to TV.
D’ COAXIAL (p. 12)
or
B’ COMPONENT (p. 11)
E’ OPTICAL (p. 12)
or
or
C’ VIDEO (p. 11)
F’ L/R (p. 13)
1 COAXIAL (p. 12)
6 AC inlet (p. 15)
2 L/R (AUDIO OUT) (p. 13)
7 REMOTE CONTROL (IN/OUT) (p. 15)
3 COMPONENT (p. 11)
8 USB/BD STORAGE (p. 14)
4 HDMI (p. 10)
9 VIDEO (p. 11)
5 NETWORK (p. 14)
0 OPTICAL (p. 12)
English
9 En
HDMI CONNECTION
■ Connecting to the HDMI terminal
–
–
–
–
You can enjoy high quality digital picture and sound through the HDMI terminal.
Firmly connect an HDMI cable (commercially available) to the HDMI terminals.
See page 32 for information on the audio/video output formats.
Use HIGH SPEED HDMI cables that have the HDMI logo (as shown on the back cover).
Caution!
Do not connect the power cable of this Player until all connections are completed.
This Player
DIGITAL OUT
AUDIO OUT
COAXIAL
L
VIDEO OUT
COMPONENT
Y
PB
HDMI
OPTICAL
R
VIDEO
PR
NETWORK
USB BD STORAGE
Hints
– When you use the HDMI Control function,
refer to the “HDMI Control” (p. 28).
– For information on the output mode of HDMI
terminal, refer to the “HDMI” (p. 31).
To HDMI terminal
HDMI cable
(commercially available)
A
A’
To HDMI input terminal
HDMI IN
AV receiver
10 En
TV
VIDEO CONNECTIONS
■ Connecting to the component/video jack
Caution!
Do not connect the power cable of this Player until all connections are completed.
This Player
DIGITAL OUT
AUDIO OUT
COAXIAL
L
This Player
DIGITAL OUT
VIDEO OUT
COMPONENT
Y
PB
PR
VIDEO
(Red)
(Blue)
(Green)
R
AUDIO OUT
COAXIAL
L
HDMI
OPTICAL
2
CONNECTION
– You can enjoy accurate color reproduction and high quality images through the component jacks.
– Firmly connect a component video cable (commercially available) or an Audio/Video cable to the COMPONENT
jacks/VIDEO jack.
– See page 32 for information on the video output formats.
VIDEO OUT
COMPONENT
Y
PB
HDMI
NETWORK
OPTICAL
USB BD STORAGE
R
VIDEO
PR
To COMPONENT
jacks
NETWORK
USB BD STORAGE
(Yellow)
To VIDEO
jack
Component video cable
(commercially available)
B
B’
Audio/Video cable
(supplied)
C
C’
To video
input jack
To component
input jacks
COMPONENT IN
(Yellow)
(Yellow)
Y
(Green)
(Green)
(Yellow)
PB
(Blue)
(Blue)
PR
(Red)
(Green)
(Blue)
(Red)
(Red)
VIDEO
AV INPUT
AV receiver
TV
AV receiver
TV
Note
– If you play back the image via VCR, the image may deteriorate due to the copy guard function.
English
11 En
AUDIO CONNECTIONS
■ Connecting to the digital audio jack/terminal
– You can connect audio equipment or the TV to the COAXIAL jack/OPTICAL terminal.
– Firmly connect a Coaxial digital audio cable (commercially available) or optical cable (commercially available) to
the coaxial digital audio jack or optical digital audio terminal.
– See page 32 for information on the audio output formats.
Caution!
Do not connect the power cable of this Player until all connections are completed.
This Player
DIGITAL OUT
AUDIO OUT
COAXIAL
L
DIGITAL OUT
VIDEO OUT
COMPONENT
Y
PB
R
VIDEO
PR
AUDIO OUT
COAXIAL
L
HDMI
OPTICAL
This Player
VIDEO OUT
COMPONENT
Y
PB
HDMI
NETWORK
OPTICAL
USB BD STORAGE
R
VIDEO
PR
USB BD STORAGE
To COAXIAL
jack
To OPTICAL
terminal
Coaxial digital audio cable
(commercially available)
D
D’
Optical cable
(commercially available)
E
To coaxial
input jack
AV receiver
NETWORK
E’
To optical
input terminal
COAXIAL
OPTICAL
AV INPUT
DIGITAL AUDIO IN
TV
AV receiver
TV
Hint
– For information on the output mode of COAXIAL jack/OPTICAL terminal, refer to the “COAXIAL/OPTICAL”
(p. 31).
12 En
AUDIO CONNECTIONS
■ Connecting to the audio jacks
– You can connect audio equipment or the TV to the AUDIO OUT L/R jacks.
– Firmly connect an Audio/Video cable (supplied) to the AUDIO OUT L/R jack.
– See page 32 for information on the audio output formats.
2
Caution!
CONNECTION
Do not connect the power cable of this Player until all connections are completed.
This Player
DIGITAL OUT
AUDIO OUT
VIDEO OUT
COMPONENT
Y
PB
COAXIAL
L
HDMI
USB BD STORAGE
(Red)
To AUDIO OUT
L/R jack
PR
VIDEO
R
(White)
OPTICAL
NETWORK
Audio/Video cable
(supplied)
F
F’
To audio L/R
input jack
(White) (Red)
AV receiver
R
(Red)
L
AUDIO IN
(White)
(Red)
(White)
AUDIO
TV
English
13 En
NETWORK AND USB CONNECTION
■ Connecting to the NETWORK terminal and USB/BD STORAGE terminal
– PC contents can be played back by connecting this Player to the network.
– You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live
compatible discs. Refer to page 25 regarding further information on BD-Live functions.
– You can connect a USB memory device (2 GB or greater and formatted with FAT 32/16) to the USB/BD
STORAGE terminal to save the BD-Live data or to upgrade the software of this Player.
– Firmly connect a network cable (commercially available) and a USB memory device (commercially available) to
the NETWORK terminal and USB/BD STORAGE terminal.
– Use only an STP (shielded twisted pair) network cable.
– When using the internet, a broadband internet connection as shown below is required.
– Connect the other connector of the network cable to the hub/broadband router.
– The USB memory device connected to the USB port on the front panel works same as the one connected to the
USB/BD STORAGE terminal on the rear panel.
Before using the USB memory device
This Player
CAUTION:
– Do not remove the USB memory device
or unplug the power cable while the
operations for BUDA (p. 37) or software
upgrade are being performed.
– Do not use a USB extension cable when
connecting a USB memory device to the
USB/BD STORAGE terminal of the
Player. Using a USB extension cable
may prevent the Player from performing
correctly.
DIGITAL OUT
AUDIO OUT
VIDEO OUT
COMPONENT
Y
PB
COAXIAL
L
HDMI
OPTICAL
R
VIDEO
PR
NETWORK
USB BD STORAGE
To USB/BD
STORAGE
Terminal
To NETWORK
terminal
Note
– Yamaha cannot guarantee that all brands’
USB memory devices will operate with
this Player.
USB memory device
(commercially available)
Network cable
(commercially available)
Notes
– When using a broadband internet
connection, a contract with an internet
service provider is required. For more
details, contact your nearest internet service
provider.
– Refer to the operation manual of the
equipment you have as the connected
equipment and connection method may
differ depending on your internet
environment.
– Use a network cable/router supporting
10BASE-T/100BASE-TX.
To LAN
terminal
LAN
Internet
Modem
Hub or
broadband router
After connecting
– When you set the Network setting manually, refer to “Network” (p. 29).
– To play back the PC contents on your network, refer to “Using network content” (p. 19).
14 En
PC
OTHER CONNECTIONS
■ Connecting to the REMOTE
CONTROL jacks
■ Connecting the power cable
– After all connections are completed, plug the
supplied power cable into the AC inlet on the rear of
the Player. Then plug into AC outlet.
2
CONNECTION
– You can transmit and receive the remote control
signals by connecting to the REMOTE CONTROL
(OUT/IN) jacks.
– Firmly connect monaural 3.5 mm mini plug cables
(commercially available) to the REMOTE
CONTROL (OUT/IN) jacks.
– If your AV receiver is a Yamaha product and has the
capability to transmit SCENE control signals, you
can use the SCENE function.
– You can connect a Yamaha component (such as CD
player) corresponds with the SCENE function to the
REMOTE CONTROL (OUT) jack of this Player.
Caution!
Do not connect the power cable of this
Player until all connections are completed.
This Player
To AC inlet
NETWORK
OUT
IN
To AC outlet
REMOTE CONTROL
USB BD STORAGE
Note
To REMOTE
CONTROL
(OUT) jack
Monaural 3.5 mm
mini plug cable
(commercially
available)
To REMOTE
CONTROL (IN)
jack
– TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH THE UN-INSULATED PARTS OF
ANY CABLES WHILE THE POWER CABLE IS
CONNECTED.
Monaural 3.5 mm mini
plug cable
(commercially available)
To remote
control out
jack
To remote
control in
jack
REMOTE CONTROL IN
Yamaha component
REMOTE CONTROL OUT
Infrared signal receiver
or Yamaha component
(such as AV receiver)
Hints
English
– For details about the SCENE function, refer to the
owner’s manual supplied with your Yamaha AV
receiver.
15 En
PLAYBACK
INITIAL WIZARD/EASY SETUP
■ Setting with the Initial Wizard/
Easy Setup
Initial Wizard/Easy Setup allows you to set language,
resolution, and screen aspect ratio easily. Initial Wizard
screen is displayed when you turn this Player on for the
first time after purchase or upgrade. Same setting can be
performed from SETUP menu = System = Easy Setup.
4 Press 5/a to select the screen aspect ratio, then press
ENTER. For details on setting items, see “TV Screen”
(p. 30).
Easy Setup is completed.
1 When Easy Setup screen is displayed, Press ENTER to
start Easy Setup.
Note
– When no picture is displayed after Initial Wizard/
Easy Setup is completed, refer to
“TROUBLESHOOTING” (p. 35).
2 Press 5/a to select the language you want to display
on the screen, then press ENTER.
3 Press 5/a to select the resolution, then press ENTER.
For details on setting items, see “Resolution” (p. 30).
16 En
HOME MENU
HOME menu allows you to browse and play multi-media
files on data discs, USB memory devices and your
network.
Note
– For details on playable disc and format, see page 3.
Basic operation
5/a : Moves the focus.
2: Returns to the parent folder.
3: Checks/unchecks single folder/file.
HOME: Moves to/exits HOME menu screen.
ENTER: Confirms the folder/file.
POP-UP MENU: Opens Edit Menu.
CLEAR
Note
– Stop the playback of the video before you move to
HOME menu screen.
1 Press HOME to display HOME menu screen.
Press 2/3 to select HOME, then press ENTER.
3
SEARCH
PROGRAM
DIGEST
PIP
2ND
AUDIO
Example: Selecting a movie file on a USB memory
device
PLAYBACK
■ Playing back photo/music/video
Common operations for playing back
files in a selected folder
REPEAT
HOME
TOP
MENU
A B
POP-UP
MENU
2 HOME screen appears.
ENTER
ON
SCREEN
RETURN
SUBTITLE
ANGLE
ZOOM
AUDIO
Icons on the top of HOME screen
: Plays back the disc on the tray, or displays contents
in the data disc.
: Displays contents in the USB memory device
connected to the USB port and/or USB/BD STORAGE
terminal.
: Searches for a DLNA (p. 19) server on the network.
: Displays contents on the connected DLNA server.
: Connects to Netflix (p. 20).
: Displays playlist (p. 18).
3 Select the item which contains the file you want to play
back, then press ENTER.
English
17 En
HOME MENU
4 Select the Photo, Music, Video or AVCHD folder you
want to play back, then press ENTER.
To return to the parent folder, press 2 or select
.
Hint
– To enjoy slide show with music, press HOME to
return to the HOME screen while music is played
back, and select photo file.
Note
– The displayed file may not be played back
depending on the content.
Operations for viewing photos
Note
– Note that the only the file type selected on this step
will be displayed in the following step. For example,
if you selected Photo folder in this step, only photo
files are displayed after this step. When you play
back other than photo, return to this hierarchy and
select file type again.
5 Select the folder(s) containing the file you want to play
back.
While viewing photos, the buttons on the remote control
work as shown below.
: Stops slide show and returns to the file browser.
: Pauses a slide show.
: Plays a slide show.
: Moves to a next photo/Makes a slide show faster in
3 steps.
: Moves to a previous photo/Makes a slide show
slower in 3 steps.
5: Inverts a photo.
a : Reflects a photo.
2: Rotates a photo counterclockwise.
3: Rotates a photo clockwise.
ZOOM: Zooms in/out a photo (zoom in/out: 3 steps each).
5/a /2/3: Pan in zoom mode when a photo is larger
than the screen.
DIGEST: Switches to thumbnail mode (p. 7). When
thumbnails are displayed, you can proceed to the next/
previous page with
/
.
Using playlist
You can add favorite files to a playlist, and play back the
favorite files from the Playlist folder on HOME screen.
1 Press POP-UP MENU when the folder/file you want
to add to/remove from the playlist is displayed.
6 Select the file you want to play back, then press
ENTER.
When a video file is selected, playback starts.
When a music file is selected, status screen is displayed
and playback starts.
When a photo file is selected, slide show starts.
2 Select the item below in the pop-up menu.
Add to Playlist: Adds files in the focused/checked
folder or focused/checked file to the playlist.
Remove from Playlist: Removes the focused/
checked folder/file from the playlist.
Select all: Checks all folders/files in the folder being
opened. You can check up to 100 folders/files at once.
Clear all: Unchecks all folders/files in the folder
being opened.
Cancel: Closes Edit Menu.
Hint
– You can also check/uncheck the focused file/folder
by pressing 3.
Note
– When you move to another folder before you add the
checked folders/files to the playlist, the folders/files
will be unchecked.
18 En
HOME MENU
3 To play back a file in playlist, select the file you want
to play back under the playlist folder on HOME screen.
Note
– When a disc/USB memory device which contains
the file added to the playlist is removed, the file will
be removed from the playlist.
■ Using network content
4 Select the file you want to play back.
Notes
– The playback and operating quality may be affected
by your home network condition.
– The files from removable media such as USB
memory devices or DVD-drive on your media
server, may not be shared properly.
About DLNA
3
PLAYBACK
This Player is a DLNA certified digital media player. You
can manage photo, music and video contents stored on
DLNA servers on your home network.
– The file requirements may not always be compatible.
There may be some restrictions depending on file
features and DLNA sever capability.
DLNA (Digital Living Network Alliance) provides easy
sharing of digital media through network in the home, and
you can enjoy digital contents stored on your DLNAserver-software-installed PC or other DLNA compatible
device with your TV via this Player. To connect this
Player to your DLNA servers, some settings for the
DLNA server or device are required. For details, refer to
your DLNA server software or DLNA device.
Playing back shared contents
1 To play back files on your PC, install a DLNA server
software, such as Windows Media Player 12, and share
files you want to play back.
Windows Media Player is a registered trademark or
trademark of Microsoft corporation in the United
States and/or other countries.
2 Turn on the PC with DLNA server software installed or
the DLNA device connected to your home network.
3 Press HOME to display HOME menu screen. Then
select HOME to move to HOME menu. The DLNA
servers connected to the network are listed on the
screen.
Notes
English
– If your DLNA server is not listed, select DLNA
Search to find it.
– Depending on the DLNA server, this Player may
need to be permitted from the server.
– To play the file on the DLNA server, this Player and
the server must be connected to the same access
point.
19 En
PLAYING VIDEOS FROM NETFLIX
You can instantly watch movies and TV episodes from
Netflix over the internet using this Player. To be a Netflix
member, visit http://www.netflix.com.
■ Checking the activation code
Before you watch videos from Netflix, you need to get the
activation code displayed on your TV.
1 Press HOME to display HOME menu screen.
Press 2/3 to select Netflix, then press ENTER.
Notes
– When software upgrade is required, an update notice
appears when you select Netflix. In this case,
perform the software upgrade (p. 34).
– For details on the Netflix, refer to Netflix website on
http://www.netflix.com.
– To deactivate Netflix, refer to “Netflix Info” (p. 29).
■ Preparing for watching video on
your computer
You need to complete the activation of this Player through
the internet with your computer. After that procedure, you
can add your desired videos in your instant queue. Your
instant queue is also displayed on your TV via your
Player, so your selections are available for watching at
anytime.
1 Enter the activation code displayed on your TV to
complete activation of Netflix function in this Player.
2 Press 5/a to select “yes - activate instant streaming
from Netflix”, then press ENTER.
2 Click “Watch Instantly” tab, then select the desired
video and click “Add to instant”.
For details on operations of instant queue, refer to
Netflix website on http://www.netflix.com.
■ Playing the video
After you add your desired videos in your instant queue,
you can watch them on your TV.
1 Press HOME to display HOME menu screen.
Press 2/3 to select Netflix, then press ENTER.
2 Press 2/3 or
press ENTER.
/
to select the video, then
Hint
– You can also select “no - start my FREE trial”. For
details on free trial, refer to Netflix website on http://
www.netflix.com.
3 The activation screen appears and it displays the
activation code on your TV.
3 Press 5/a to select “play”. Then payback starts.
Activation code
20 En
PLAYING VIDEOS FROM NETFLIX
■ Operations for watching videos
While watching videos from Netflix, the buttons on the
remote control work as shown below.
: Plays back the video.
: Pauses playback.
/5/HOME: Stops video and displays instant queue.
ENTER: Pauses playback and performs frame advance/
reverse playback.
2/3: Pauses playback and performs frame advance/
reverse playback.
/
: Pauses playback and performs search
backward/forward. To play back from the desired point,
press ENTER/
. To resume the playback from the
point you pauses the video at, press 5.
RETURN: Returns to HOME menu.
HOME
TOP
MENU
PLAYBACK
2ND
AUDIO
3
A B
POP-UP
MENU
ENTER
ON
SCREEN
RETURN
SUBTITLE
ANGLE
ZOOM
AUDIO
STATUS
Note
– While you watch videos from Netflix, the audio and
video quality may be compromised based on your
speed of broadband internet connection. The
recommended internet connection speed is 1.5 Mbps
or higher. For the best audio and video quality, 4.0
Mbps is required. For the details on your internet
connection speed, contact your internet service
provider.
English
21 En
ADVANCED PLAYBACK OPERATION
This chapter explains playback of commercially available
BD and DVD discs (like movies), CDs, and recorded
DVD-RW/R discs.
Note
– For the basic playback operation, see page 6.
■ On Screen menu
This allows you to operate some functions from the On
Screen menu. To display On Screen menu, press ON
SCREEN. After that, press 5/a /2/3 to select an item,
then press ENTER to operate the desired function.
Hint
– When a DVD is played back, you can select Random
All, Random TT (title), Random CH (chapter),
Shuffle All, Shuffle TT (title) and Shuffle CH
(chapter).
Audio BD DVD VIDEO :
Shows audio language/signal of BD/DVD disc currently
selected. You can select the desired type of audio.
Angle BD DVD :
Shows the currently-selected angle number. If the video is
recorded with multiple angles, you can change the angle.
Subtitle BD DVD VIDEO :
Shows the currently-selected subtitle language. If subtitles
are provided in other languages, you can change to your
preferred language.
Subtitle Style BD :
Shows the currently-selected subtitle style. This function
is available only for Video-file external subtitle. You can
select the desired text style of subtitle.
On Screen menu contains following items.
Bitrate BD DVD CD VIDEO MUSIC :
Shows bitrate of the audio/video signal.
Title BD DVD VIDEO :
Shows the title number being played back. You can skip to
the desired title by selecting it from this item.
Second Video BD :
Turns the PIP on/off (p. 6).
Chapter BD DVD VIDEO :
Shows the chapter number being played back. You can
skip to the desired chapter by selecting it from this item.
Track/File CD VIDEO MUSIC PHOTO :
Shows track/file number being played back. You can skip
to the desired track/file by selecting it from this item.
Time BD DVD CD VIDEO MUSIC :
Shows the playback time. Select display type from the
following:
– Elapsed playback time of the title, chapter, disc,
track or file
– Remaining playback time of the title, chapter, disc,
track or file
Mode/Play Mode
DVD CD VIDEO MUSIC PHOTO :
Shows current playback mode. You can select playback
mode from the following:
– Normal: Normal playback.
– Shuffle: Each track/file must play once without
repetition.
– Random: Real random playback. Repetition may
happen.
22 En
Second Audio BD :
Turns the secondary audio on/off (p. 6).
Still Off BD :
On some BD/DVD discs, the video pauses at a designated
point during playback. This releases pause and restarts
playback.
Ins Search
BD
DVD
CD
VIDEO
MUSIC :
Skips 30 seconds.
Ins Replay
BD DVD CD VIDEO MUSIC :
Replays the content from 10 seconds before.
Slide Show PHOTO :
Shows slide show speed. You can select the slide show
speed from Slow/Medium/Fast.
Transition PHOTO :
Shows haw photo appears on the screen. You can select
the transition type.
Code Page VIDEO :
Selects character code of subtitle.
ADVANCED PLAYBACK OPERATION
■ Status menu
This allows you to adjust various settings, such as
subtitles, angle settings and the title selection for direct
playback. To display status menu, press STATUS. Status
menu contains following menus.
When playing Audio CD or music file
Example: Icons when playing music file
123 4
5
6
7
When playing BD-Video/DVD-Video or
video file
3
Example: Icons when playing BD
2
3
8 7
4
5
PLAYBACK
1
6
8
1
2
(Playback status)
(Disc type/video file icon)
1
(Playback status)
2
(Repeat mode): Shows current repeat mode (p. 7).
3
(Disc type/music file icon)
4 (Artwork) MUSIC : Displays artwork if the file
contains it.
3
(Title number being played): You can jump to
specified title with SEARCH button (p. 7).
5
4
(Chapter number being played): You can
jump to specified chapter with SEARCH button (p. 7).
6 (Information) MUSIC : Displays music information
if the file contains them.
5
(Elapsed playback time): You can jump to
specified point with SEARCH button (p. 7).
7
6
(Subtitle currently selected): You can change
the subtitle language with SUBTITLE button.
8 (Progress bar) MUSIC : Shows progress status of
current song.
7
(Audio currently selected): You can change the
audio language or format with AUDIO button.
When viewing photo
8
(Repeat mode): Shows current repeat mode (p. 7).
(Track/file number being played): You can
jump to specified track with SEARCH button (p. 7).
(Elapsed playback time): You can jump to
specified point with SEARCH button (p. 7).
1
(Playback status)
2
(Photo file icon)
3
(File number being displayed)
4
(Repeat mode): Shows current repeat mode (p. 7).
5 (Slide show speed)
English
23 En
ADVANCED PLAYBACK OPERATION
■ Using Bookmark
DVD
VIDEO
This allows you to set Bookmark at the specified point of
the video. After Bookmark is set, you can move to the
point you set using this function. You can set up to 12
Bookmarks.
1 Press MARKER during playing back the movie to set
Bookmark. Bookmark number, and the status are
displayed.
2 Press ENTER to program playback order.
For CD, press 5/a to select a desired track then press
ENTER.
For DVD disc, select a desired title (shown as TT) and
chapter (shown as CH) instead of a track.
To clear a set track, select the track you want to clear,
then press CLEAR.
Press RETURN to cancel the Program play.
2 After Bookmark is set, press and hold MARKER to
display Bookmark select bar.
3 Press 2/3 to select the Bookmark you want to play
back, then press ENTER.
Press CLEAR to delete the selected Bookmark.
Note
– When playback is finished (e.g., ejecting the disc,
pressing
twice), Bookmarks are automatically
deleted.
■ Program play
DVD
CD
3 After programming is finished, press
start program playback.
to set and
4 To cancel program play, stop playback completely by
pressing
twice.
■ Using search
BD
DVD
CD
VIDEO
MUSIC
This allows you to program playback order of CD tracks
or DVD chapters.
Press PROGRAM during playback to display the
PROGRAM window to program playback order.
You can program up to 15 tracks/chapters.
This allows you to jump to the specified point during
playback.
Example: Programming the playback order of CD tracks
2 Press 5/a /2/3 to select one of the item below, then
press ENTER.
1 Press PROGRAM during playback.
1 Press SEARCH during playback. Status bar appears.
BD DVD :
– Title number (shown as
)
– Chapter number (shown as
)
– Elapsed title time (shown as
)
– Elapsed chapter time (shown as
)
CD :
– Track number (shown as
)
– Elapsed track time (shown as
)
– Elapsed disc time (shown as
VIDEO
)
MUSIC :
– File number (shown as
)
– Elapsed file time (shown as
)
3 Press 5/a or number buttons to set/adjust the value of
the focused item, and press ENTER to jump to the
specified point.
4 To close the status bar, press STATUS.
24 En
ADVANCED PLAYBACK OPERATION
■ Enjoying BONUSVIEW and BDLive
■ Using the feature of BD-Live
This player supports BONUSVIEW (p. 37) (BD-ROM
Profile 1 Version 1.1) and BD-Live (p. 37) (BD-ROM
Profile 2) playback functions.
1. Set the Network setting (p. 29).
Note
■ Using Picture in Picture function
(secondary audio/video playback)
BD-Video that includes secondary audio and video
compatible with Picture in Picture can be played back
with secondary audio and video simultaneously as a small
video in the corner.
Primary video
Secondary video
BD-Live data is saved in BUDA (p. 37) (USB
memory device connected to this Player). To enjoy
these functions, connect a USB memory device
(2 GB or greater and formatted with FAT 32/16)
supporting USB 2.0 High Speed (480 Mbit/s) to the
USB/BD STORAGE terminal (p. 14) on the rear
panel.
– BUDA folder is created automatically in the USB
memory device when necessary.
– If there is insufficient storage space, the data will not
be copied/downloaded. Delete unneeded data or use
a new USB memory device.
– Some time may be required for the data to load
(read/write).
3
PLAYBACK
– Functions and playback method vary depending on
the disc. See the guidance on the disc or the supplied
user’s manual.
2. Connect the USB memory device
to this Player (p. 14).
Notes
While PIP Mark (
) or Secondary
Audio Mark (
) is displayed, press
PIP to turn the Picture in Picture
function on/off.
Notes
– To listen to secondary audio, make sure that the
Audio Output setting (COAXIAL/OPTICAL or
HDMI) is set to PCM or Reencode (p. 31).
– Depending on the disc, to listen to secondary audio,
you may need to set secondary audio to on on the top
menu of the disc (p. 6).
– The secondary audio and video for Picture in Picture
may automatically play back and be removed
depending on the content. Also, playable areas may
be restricted.
– Yamaha cannot guarantee that all brands’ USB
memory devices will operate with this Player.
– Do not use a USB extension cable when connecting
a USB memory device to the USB/BD STORAGE
terminal of the player. Using a USB extension cable
may prevent the player from performing correctly.
3. Play back the disc.
4. Run BD-Live according to the
instructions on the disc.
Notes
25 En
English
– Regarding playback method of BD-Live contents,
etc., perform the operations in accordance with the
instructions in the BD disc manual.
– To enjoy BD-Live functions, perform the network
connection (p. 14) and Network settings (p. 29).
– Refer to “BD-Live Connection” (p. 30) regarding the
setup to restrict access to BD-Live contents.
– The time required to download the provided
programs into the USB memory device connected to
this Player varies depending on the internet
connection speeds and the data volume of the
programs.
– BD-Live programs provided through the internet
may not be able to display the connection depending
on the status (upgrading) of the provider. In such
cases, take out the disc and try again.
– If the BD-Live screen does not appear for a while
after you select the BD-Live function in the BD disc
menu, the USB memory device may not have
enough free space. In such cases, eject the disc from
the player, and then erase the data in the USB
memory device using the “Fmt BUDA” menu in the
“BUDA” (p. 29).
SETTINGS
SETUP MENU
The SETUP menu enables various audio/visual settings and adjustments for functions using the remote control unit.
Menu/Submenu
Item
System
Screen Saver
Sets screen saver on/off.
28
Disc Auto Playback
Sets this Player to start disc playback automatically.
28
HDMI Control
Sets this Player to receive control signal from the remote
control of your TV/AV receiver.
28
Disc Auto Upgrade
Sets the auto upgrade to on/off.
29
Load Default
Resets all settings to the default setting except Security
setting.
29
General Setting
Language
Playback
Security
Network
TV
Display Setting
Video Process
26 En
Function
Page
Upgrade
Performs upgrade of this Player.
29
Easy Setup
Sets language, resolution, screen aspect ratio.
29
BUDA
Manages BUDA (p. 37) (format, information display, status
of use).
29
OSD
Selects the language for On Screen Display.
29
Menu
Prioritizes the language for disc menu.
29
Audio
Prioritizes the language for audio.
29
Subtitle
Prioritizes the language for subtitle.
29
Closed Caption
Sets the closed caption to on/off.
29
Angle Mark
Sets to display the Angle Mark when BD/DVD with multiple
angles is played back.
29
PIP Mark
Sets to display the PIP Mark when BD/DVD with Picture in
Picture is played back.
29
Secondary Audio
Mark
Sets to display the Secondary Audio Mark when BD/DVD
with secondary audio is played back.
29
Netflix Info
Deactivates this Player from Netflix and displays ESN
(Electric Serial Number).
29
Change Password
Changes password for Parental Control and Country Code.
29
Parental Control
Sets the Parental Control depending on the disc content.
29
Country Code
Sets your Country Code.
29
Internet Connection
Sets the internet connection to Enable/Disable.
29
Information
Displays network information screen.
30
Connection Test
Performs the network connection test.
30
IP Setting
Sets the IP setting to Auto/Manual.
30
BD-Live
Connection
Sets the BD-Live connection to Permitted/Partial Permitted/
Prohibited.
30
DLNA
Sets the DLNA to Enable/Disable.
30
Proxy Setting
Sets the proxy setting.
30
TV Screen
Sets the screen aspect ratio of the connected TV, and adjust
the video output.
30
Resolution
Selects the resolution of output video.
30
TV System
Selects the TV System from PAL/NTSC/Multi.
30
Color Space
Selects Color Space from RGB/YCbCr/ YCbCr422.
30
HDMI Deep Color
Selects HDMI Deep Color from 30 bits/36 bits/Off.
30
HDMI 1080p 24Hz
Sets HDMI 1080p 24Hz to on/off.
31
Video Adjust
Adjusts the video brightness, contrast, hue and saturation.
31
Sharpness
Selects the sharpness level from High/Medium/Low.
31
SETUP MENU
Menu/Submenu
Item
Audio Output
Function
Page
COAXIAL/
OPTICAL
Selects the output mode of COAXIAL jack/OPTICAL
terminal from Bitstream/PCM/Reencode/Off.
31
HDMI
Selects the output mode of HDMI terminal from Bitstream/
PCM/Reencode/Off.
31
Downsampling
Selects the digital audio signal down sampling frequency
from 48k/96k/192k.
31
DRC
Sets the DRC (Dynamic Range Compression).
31
Sets the audio output from AUDIO OUT L/R jack.
31
Audio Setting
Speaker Setting
Displays software version and MAC address (p. 38).
31
■ Example of SETUP menu
operation
You need to call up the SETUP menu screen to perform
settings for this Player. The following is the explanation
for basic operations of the SETUP menu.
TRANSMIT
B
C
CLEAR
Note
– Some items cannot be set during playback. In this
case, press
twice to stop playback completely
before setting.
D
Press SETUP to display the SETUP menu screen.
Press 2/3 to select General Setting, then press
ENTER or a .
SEARCH
PROGRAM
PIP
2ND
AUDIO
Example: Setting Parental Control to KID SAFE
1. Display the SETUP menu screen.
MARKER SETUP
A
SETTINGS
System
Information
4
DIGEST
HOME
TOP
MENU
REPEAT
A B
POP-UP
MENU
ENTER
ON
SCREEN
RETURN
SUBTITLE
ANGLE
ZOOM
AUDIO
2. Select a Submenu.
Press 5/a to select Security, then press ENTER or
3.
English
27 En
SETUP MENU
3. Select a menu item.
Press 5/a to select Parental Control, then press
ENTER or 3.
■ General Setting
The default settings are marked with “ * ”.
System
Screen Saver
You can set the screen saver to on/off.
When set to on, this Player will switch to screen saver
mode if there is no operation for 3 minutes. After that, this
Player will turn to standby mode when there is no
operation for 6 minutes.
On*, Off
Disc Auto Playback
You can set Disc Auto Playback to on/off. When set to on,
a disc will play back automatically after loading.
On*, Off
4. Enter password.
Enter your password with number buttons.
– The default password is 0000.
– You cannot move to the next setting screen until
you have input the correct password.
– To change the password, refer to “Change
Password” (p. 29).
5. Select a next item.
Press 5/a to select the Parental Control Level for
BD/DVD, then press ENTER.
HDMI Control
You can set the Player to receive control signal from a
TV/AV receiver compatible with the HDMI Control
function via an HDMI cable (p. 10).
On, Off*
Using HDMI Control function
Using the HDMI Control function, you can interactively
operate this Player with your TV (HDMI Control
function supported).
When you connect this Player to the TV compatible with
the HDMI Control function using an HDMI cable and
set HDMI Control in the SETUP menu to on (p. 28), you
can perform the function listed below.
• Automatic input select function
When you start playback of this Player, the input
selector of the TV (and an AV receiver if this Player is
connected to the TV via the AV receiver) is switched
to this Player automatically. TV Power is turned on
automatically depending on the TV.
• Automatic power off function
When you turn off the TV while this Player is in stop
mode and the SETUP menu screen is not displayed,
the power of this Player is also turned off
automatically.
Notes
6. Exit the menu screen.
Press 2 to return to the previous menu.
28 En
– HDMI Control function may not work properly
depending on the TV.
– Functions other than ones shown above may work
depending on the TV or AV receiver.
– In order to make the HDMI Control function
available, set up settings for the HDMI Control
function on ALL components (this Player, TV,
and AV receiver). Certain operation may also be
required.
– Each function may be set independently to
activate/deactivate depending on the TV.
– Refer to the operation manuals supplied with the
TV and/or AV receiver for details regarding setup.
SETUP MENU
Disc Auto Upgrade
You can set Disc Auto Upgrade to on/off. When set to on, this
Player will upgrade the software after loading the disc which
contains the upgrade file package. For details on software
upgrade, refer to “SOFTWARE UPGRADE” (p. 34).
On*, Off
Load Default
You can reset all settings of this Player to default setting
except Security setting (p. 29). For details on default
settings, see pages 26-31.
Easy Setup
You can perform Easy Setup (p. 16).
BUDA
You can manage BUDA (p. 37) (format, information
display, status of use). To format (empty) the BUDA
folder in the USB memory device, press ENTER when
“Fmt BUDA” is focused on the screen.
) when BD/
On*, Off
PIP Mark
You can set to display the PIP Mark (
) when BD with
picture in picture (p. 25) is played back.
On*, Off
Secondary Audio Mark
You can set to display the Secondary Audio Mark (
when BD with secondary audio is played back.
On*,
Off
Netflix Info
You can deactivate this Player from Netflix and display
ESN (Electric Serial Number).
To activate this Player again, refer to “PLAYING
VIDEOS FROM NETFLIX” (p. 20).
ESN (Electronic Serial Number) is a unique number that
allows you to use Netflix streaming.
Security
OSD
You can select the language for On Screen Display which
is the messages or menu displayed on the screen such as
SETUP menu.
Change Password
You can set the password for changing the Parental
Control Level and Country Code. Refer to “Parental
Control” (p. 29) and “Country Code” (p. 29).
Nederlandse , Svenska ,
,
Menu
You can prioritize the language for disc menu.
English*, Français ,
, Español , Deutsch , Italiano ,
Nederlandse , Portuguese, Danish, Svenska , Finnish,
Norwegian,
, Korean, Japanese, More
Audio
You can prioritize the audio language for BD/DVD
playback. For details on setting items, see “Menu” (p. 29).
Subtitle
You can prioritize the language for Subtitle.
4
Yes, No*
Language
English*, Français , Deutsch , Español , Italiano ,
)
SETTINGS
Upgrade
You can upgrade the software manually from Disc, USB
Storage or Network. For details on software upgrade, refer
to “SOFTWARE UPGRADE” (p. 34).
Angle Mark
You can set to display the Angle Mark (
DVD with multiple angles is played back.
Note
– The default password is 0000.
Parental Control
In some BD/DVD discs, a control level for disc viewing is
set depending on the age of the viewer. You can set the
Parental Control shown on the screen depending on the
disc content.
The password (see “Change Password” on p. 29) needs to
be entered before the Parental Control Levels is set.
After you set the Parental Control, when you play back a
disc with level higher than current Parental Control Level,
or you want to change the Parental Control Level, a dialog
box will pop up to ask you to enter the password.
Off*, KID SAFE, G, PG, PG-13, PGR, R, NC-17, ADULT
English, Français ,
, Español , Deutsch , Italiano ,
Nederlandse , Portuguese, Danish, Svenska , Finnish,
Norwegian,
, Korean, Japanese, More, Off*
Playback
Closed Caption
You can set to display the closed caption (p. 37) when BD/
DVD with closed caption is played back.
On*, Off
Country Code
You can set the Country Code you live in. The password
(see “Change Password” on p. 29) needs to be entered
before the Country Code is set. This setting may be used
for rating of Parental Control and disc playback.
Network
Enable*, Disable
29 En
English
Internet Connection
Set this item to Enable when you use BD-Live (p. 25), DLNA
(p. 19) and software upgrade from the network (p. 34).
SETUP MENU
Information
You can display network information screen. On this
screen, you can view the information of Interface
(Ethernet), Address Type, IP Address, Subnet Mask,
Default Gateway, and DNS.
Connection Test
You can perform a test for both cable connection and IP
settings, and it will ping default gateway. If the test is
failed, please check “IP Setting” (p. 30) and perform the
test again.
Original
image size
BD-Live Connection
You can set access restriction to BD-Live contents.
Permitted*
Allows all BD-Live discs to connect the network.
Partial
Permitted
Allows only discs with owner certification.
Prohibited
Prohibits all BD-Live discs to connect the network.
16:9 Normal
4:3
Original
image size
IP Setting
You can set IP Setting to Auto/Manual. When set to Auto,
IP address is allocated automatically by system. When set
to Manual, IP Address, Subnet Mask, Default Gateway
and DNS should be set manually.
Auto*, Manual
On 16:9 (wide screen) TV
16:9 Full
On 4:3 TV
4:3 Pan Scan
4:3 Letterbox
16:9
Resolution
You can select the video output resolution from Auto,
480i/576i, 480p/576p, 720p, 1080i, and 1080p. When set
to Auto, resolution is set to the maximum resolution
according to the connected TV. For more details on output
formats, refer to “About the video output formats” (p. 32).
Auto*, 480i/576i, 480p/576p, 720p, 1080i, 1080p
DLNA
You can set the DLNA (p. 19) to Enable/Disable. When
you do not use the DLNA function, set to Disable.
Enable*, Disable
Proxy Setting
You can set Proxy Setting. Set to Disable for normal use.
Disable*
Sets proxy server to disable. Select this item when
proxy server is not used.
Proxy Host
Sets the proxy host.
Proxy Port
Sets the proxy port.
■ Display Setting
The default settings are marked with “ * ”.
TV System
You can select TV System from PAL, NTSC and Multi.
Set the same TV System as your TV set. For more details
on output formats, refer to “About the video output
formats” (p. 32).
NTSC*, PAL, Multi
Note
– When no picture is displayed after this setting is
changed, press and hold
on the front panel for
around 5 seconds to switch NTSC/PAL manually.
Color Space
You can select the Color Space (p. 37) output from
HDMI. This function is available when this Player is
connected with an HDMI cable.
RGB
Outputs video signal at normal signal range.
TV
YCbCr*
Sets Color Space to YCbCr.
TV Screen
You can set the screen aspect ratio of the connected TV,
and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected TV
changes, you will have to change the TV Screen setting.
YCbCr422
Sets Color Space to YCbCr422.
16:9 Full
Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
16:9 Normal* Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
4:3 Pan Scan Select this when this Player is connected to a TV
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
4:3 Letterbox Select this when this Player is connected to a TV
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
30 En
Note
– This function is only available on TVs that support
this function.
HDMI Deep Color
When your TV and/or AV receiver is compatible with
Deep Color (p. 37), set this item according to your TV/AV
receiver. This function is available when this Player is
connected with an HDMI cable.
30 bits, 36 bits, Off*
SETUP MENU
HDMI 1080p 24Hz
This outputs the BD-Video encoded in 24Hz frame rate in
HDMI 1080p 24Hz. Smoother video playback may be
available with this function. This function is available
when your TV/AV receiver support this function, and this
Player is connected with an HDMI cable. For more details
on output formats, refer to “About the video output
formats” (p. 32).
On, Off*
HDMI
You can select the output mode of HDMI ternminal. For
details on setting items, see “COAXIAL/OPTICAL” (p. 31).
For more details on output formats, refer to “About the audio
output formats” (p. 32).
Downsampling
You can select digital audio signal down-sample
frequency. This function is effective for the audio signal
output from the COAXIAL jack/OPTICAL terminal.
The highest sampling rate of digital PCM output is
48 kHz.
– This setting is disabled when output resolution is
other than 1080p.
96k
The highest sampling rate of digital PCM output is
96 kHz.
192k
The highest sampling rate of digital PCM output is
192 kHz.
Video Process
Video Adjust
You can adjust the visual image. Press 5/a to select the
parameter, then press 2/3 to adjust the figure.
Brightness
Adjusts the overall brightness of the image. To
render a brighter image, increase this figure. To
render a darker image, decrease this figure.
Contrast
Adjusts the bright areas (white levels) in the image.
To increase the contrast clarity of the image, increase
this figure. To decrease the contrast clarity of the
image, decrease this figure.
Hue
Adjusts the tint of the projected image. To render a
greenish image, increase this figure. To render a
reddish image, decrease this figure.
Saturation
Adjusts the richness of the color in the projected
image. To render a richer color, increase this figure.
To render a lighter color, decrease this figure.
DRC
You can set the DRC (Dynamic Range Compression)
(p. 37) to on/off/Auto. When set to Auto, DRC is
automatically turned on for a source with DRC
information in Dolby TrueHD format. DRC makes the
strong sound such as plosive sound lower, and
conversations more audible. It is useful when you watch
movies in the night.
Off, On, Auto*
Speaker Setting
You can set the output from AUDIO OUT L/R depending
on the connected speaker or amplifier.
1 Select the Lt/Rt or Stereo depending on the connected
amplifier’s function.
The default settings are 0.
Lt/Rt
Sharpness
You can set the sharpness of objects in the video.
Select this item when this Player is connected to an
amplifier compatible with Dolby Pro Logic.
Stereo*
Select this item when this player is connected to a
stereo amplifier.
High
Renders a sharper image.
Medium
Renders a moderately sharp image.
Low*
Renders a softer image.
■ Audio Setting
The default settings are marked with “ * ”.
Audio Output
4
SETTINGS
48k*
Note
2 Adjust the volume level output of the left/right
speakers.
Trim
-10 to 10 db (in 0.5 db step)
The default setting is 0 db.
3 Set the distance between the listener and the left/right
speakers.
Delay
0 to 1,000 cm (in 5 cm step)
COAXIAL/OPTICAL
You can select the output mode of COAXIAL jack and
OPTICAL terminal. For more details on output formats,
refer to “About the audio output formats” (p. 32).
■ System Information
Bitstream*
Outputs digital signal without any processing.
Secondary Audio is not output.
Software version and MAC address (p. 38) are displayed.
PCM
Outputs 2-channel PCM.
Reencode
Outputs Bitstream with Secondary Audio. The audio
signal is output in DTS signal.
Off
Mutes sound.
The default setting is 0 cm.
English
31 En
SETUP MENU
■ About the audio output formats
HDMI
Source format
Bitstream
PCM 2ch
COAXIAL/OPTICAL
PCM
Reencode
Bitstream
PCM
PCM 2ch
PCM 2ch
PCM 5.1ch
PCM 5.1ch
PCM 2ch
PCM 7.1ch
PCM 7.1ch
PCM 2ch
Dolby Digital
Dolby Digital with SA* or
BCS**
Dolby Digital
PCM 5.1ch
Dolby Digital
Plus
with SA* or
BCS**
Dolby Digital
Plus
PCM up to
7.1ch
Dolby
TrueHD
PCM up to
7.1ch
DTS
PCM up to
7.1ch
DTS HD High
Resolution
with SA* or
BCS**
DTS HD High
Resolution
PCM up to
7.1ch
DTS-HD
Master Audio with SA* or
BCS**
DTS-HD
Master Audio
PCM up to
7.1ch
Dolby
TrueHD
DTS
with SA* or
BCS**
with SA* or
BCS**
DTS
Dolby Digital
Plus
Dolby Digital
Dolby Digital
PCM 2ch
Dolby Digital
PCM 2ch
DTS
Dolby
TrueHD
Dolby Digital
Dolby Digital
PCM 2ch
DTS
DTS HD High
Resolution
DTS
Dolby Digital
DTS
DTS
L/R
Reencode
2ch
DTS
DTS
PCM 2ch
DTS
PCM 2ch
DTS
DTS
DTS
DTS
DTS-HD
Master Audio
DTS
DTS
PCM 2ch
DTS
DTS
* “SA” is a Secondary Audio.
** “BCS” is a button click sound, the sound effect for pop-up menus, etc.
Note
– When COAXIAL/OPTICAL or HDMI is set to Bitstream, secondary audio is not output. (p. 31)
■ About the video output formats
When TV System is set to NTSC
HDMI
Resolution
Auto
480i/576i
480p/576p
720p
1080i
HDMI
1080p 24Hz
–
–
–
–
–
Max
480i
480p
720p 60 Hz
1080i 60 Hz
480p
480p
480p
480i
480p
720p 60 Hz
1080i 60 Hz
480i
480i
Playback BD
others
Playback
commerciallyCOMPONENT released DVD
Playback BD
others
VIDEO
32 En
Playback BD
others
480i
480i
480i
1080p
On
Off
1080p 24 Hz
1080p 60 Hz
1080p 60 Hz
480p
off
1080i 60 Hz
1080i 60 Hz
off
480i
480i
SETUP MENU
When TV System is set to PAL
Auto
480i/576i
480p/576p
720p
1080i
HDMI
1080p 24Hz
–
–
–
–
–
Max
576i
576p
720p 50 Hz
1080i 50 Hz
576p
576p
576p
576i
576p
720p 50 Hz
1080i 50 Hz
576i
576i
576i
Playback BD
HDMI
others
Playback
commerciallyCOMPONENT released DVD
Playback BD
others
Playback BD
VIDEO
others
576i
576i
1080p
On
Off
1080p 24 Hz
1080p 50 Hz
1080p 50 Hz
576p
off
1080i 50 Hz
1080i 50 Hz
off
576i
576i
4
SETTINGS
Resolution
When TV System is set to Multi
Resolution
Auto
480i/576i
480p/576p
720p
1080i
HDMI
1080p 24Hz
–
–
–
–
–
480i/576i
480p/576p
720p 60/50 Hz
1080i 60/50
Hz
480i
480p
720p 60 Hz
1080i 60 Hz
1080p 60 Hz
480p/576p
480p/576p
480p/576p
720p 60/50 Hz
1080i 60/50
Hz
Playback BD
Playback
other video
HDMI
Max
others
Playback
commerciallyreleased DVD
COMPONENT Playback BD
480p/576p
480i/576i
480p/576p
Playback
other video
others
480p
480i
480p
720p 60 Hz
Playback
other video
others
On
Off
1080p 24 Hz
1080p 60/50
Hz
1080p 60/50
Hz
1080i 60/50
Hz
off
1080i 60/50 Hz
1080i 60 Hz
Playback BD
VIDEO
1080p
1080i 60 Hz
off
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
480i
480i
480i
480i
480i
480i/576i
480i
480i/576i
480i
Notes
–
–
–
–
–
–
–
“Max” in the table means that resolution is set to the maximum resolution supported by the connected TV.
HDMI 1080p 24Hz setting is disabled when output resolution is other than 1080p.
When HDMI 1080p 24Hz setting is on, video signal is output from HDMI during BD playback.
When commercially-released DVD is played back with component output, maximum resolution is 480p/576p.
When TV System is set to NTSC and video source is not 60 Hz, the video output signal is converted to 60 Hz.
When TV System is set to PAL and video source is not 50 Hz, the video output signal is converted to 50 Hz.
When TV System is set to Multi:
– while video is played back, video signal is output at the same frequency as the source.
– while a menu screen such as SETUP menu is displayed, video signal is output at the same frequency as NTSC.
English
33 En
SOFTWARE UPGRADE
Some of the newly released BD discs cannot be played
back unless you upgrade this Player software to the latest
version. We recommend upgrading the software of this
Player with software upgrade so that this Player is
operated based on the latest software.
3 Select the item which contains the upgrade file
package from Disc/USB Storage/Network.
To check for the availability of a software upgrade, visit
http://download.yamaha.com/downloads/service/top/
?site=europe.yamaha.com&language=en
Hint
– When Disc Auto Upgrade (p. 29) is set to on,
software upgrade is automatically started after
loading the disc which contains upgrade file
package.
Notes
– If software upgrade is performed, settings other than
Security setting (p. 29) are reset to their default
setting.
– Do not remove the disc/USB memory device, set this
Player to standby mode or unplug the power cable/
LAN cable while the software upgrade is being
performed.
■ Upgrading the software
3. The system will search for
upgrade file package.
4. Press ENTER to start upgrade.
1. Prepare for the software upgrade.
When you upgrade the software from Disc/USB
Storage:
1 Save the upgrade file package to the appropriate
folder on the disc/USB memory device. For more
details, refer to the procedure document attached
with the upgrade file package.
2 Load the disc or connect the USB memory
device.
When Disc Auto Upgrade is set to on, software
upgrade is started automatically. Skip step 2.
When you upgrade the software from Network:
Confirm that this Player is connected to the
network.
2. Select the upgrade method and
start upgrade from SETUP menu.
1 Press SETUP to display SETUP menu screen.
2 Select General Setting = System = Upgrade.
34 En
5. Upgrade is completed. The system
will restart and go to Initial Wizard
(p. 16) screen.
ADDITIONAL INFORMATION
TROUBLESHOOTING
Refer to the table below when this Player does not function properly. If the problem you are experiencing is not listed
below or if the instruction below does not help, turn off this Player, disconnect the power cable, and contact the nearest
authorized Yamaha dealer or service center.
■ Power
Problem
Possible causes and solutions
No power.
– Connect the AC power cable properly.
– Press (p) on the front panel to turn on the power.
The Player power is turned off.
– The power will be automatically turned off after 10 continuous minutes of inactivity (no
playback).
5
■ Basic operation
Possible causes and solutions
– Use the remote control within its operating range. (p. 5)
– Replace the batteries. (p. 5)
Buttons do not work.
– Press and hold p on the front panel for around 5 seconds to restart this Player.
– To completely reset this Player, unplug the power cable from the AC outlet for 5 - 10
seconds, plug the power cable to the AC outlet again, and then turn on this Player.
■ Disc playback
Problem
Possible causes and solutions
The Player cannot play a disc.
–
–
–
–
–
–
–
Video stops.
– The Player will stop if it senses shock or vibration.
The Player makes a snapping sound
when starting playback or loading a
disc.
– These sounds are not malfunctions of the Player but are normal operating conditions.
Take out the disc and clean it. (p. 4)
Make sure that the disc is loaded properly (aligned in disc tray and label-side up). (p. 4)
Use a disc supported by the Player. (p. 3)
Remove the disc and then check whether the Player supports the disc or not. (p. 3)
Check the region code. (p. 3)
Check whether the disc is defective by trying another disc.
The CD-R/RW, DVD+R/RW/R DL, and DVD-R/RW/R DL must be finalized. (p. 3)
ADDITIONAL INFORMATION
Problem
The remote control does not work.
■ Picture
Problem
Possible causes and solutions
– Make sure that the cables are connected correctly. (p. 8)
– Make sure that the connected TV or the AV receiver is set to the correct input. (p. 8)
– Connect this Player to the TV with VIDEO jack (p. 11) using the supplied Audio/Video
cable and set Resolution properly. (p. 30)
– If picture is still not displayed with the unit connected to the VIDEO jack, press and
hold
on the front panel for around 5 seconds to switch NTSC/PAL.
Screen freezes and operation buttons
do not work.
– Press , then restart playback.
– Turn off the power and turn on the power again.
– Press and hold p on the front panel for around 5 seconds to restart this Player.
Video is not output with the desired
resolution.
– Set to the desired resolution. (p. 30)
Widescreen video appears vertically
stretched, or black bands appear at the
top and bottom of the screen. Or 4:3
video appears horizontally stretched.
– Change the aspect ratio of your TV. (p. 30)
Square noise (mosaic) appears on the
screen.
– Blocks in images may be visible in scenes with rapid movement due to the
characteristics of digital image compression technology.
English
No picture.
35 En
TROUBLESHOOTING
The playback screen will be disturbed if
DVD video is recorded to a VCR, or
played back through a VCR.
– This Player complies with analog copy protection. Some discs contain a copy
prohibiting signal. If you try to play back such discs through a VCR, or record to a VCR
and play back the signal, the copy protection will prevent normal playback.
Audio is not output, or images are not
played back properly.
– The audio may not be output or the images may not be played back properly for some
discs in which copyright-protected contents are recorded.
■ Sound
Problem
Possible causes and solutions
No sound, or sound is distorted.
– Turn the volume up.
– There is no sound during still mode, slow motion playback, fast forward and fast
reverse. (p. 7)
– Check that the audio cable is connected correctly. (p. 8)
– Audio may not be output depending on the audio recording status, such as when audio
other than an audio signal or non-standard audio is recorded for the audio content. (p. 3)
Left and right channels of audio are
reversed, or sound comes out of only
one side.
– Check the audio connection. (p. 8)
Audio is not output, or images are not
played back properly.
– The audio may not be output or the images may not be played back properly for some
discs in which copyright-protected contents are recorded.
Cannot hear the desired audio type and/
or number of channels.
– Refer to Audio Output setting and “About the audio output formats”. (p. 31, 32)
Cannot hear the sound of PIP
(secondary audio).
– Set COAXIAL/OPTICAL or HDMI to PCM/Reencode. (p. 31)
– To hear secondary audio, press 2ND AUDIO. (p. 6)
– Depending on the disc, you may need to set secondary audio to on on the top menu of
the disc. (p. 6)
■ Network
Problem
Possible causes and solutions
Cannot connect to the Internet.
–
–
–
–
Cannot download BD-Live contents.
– Connect the Network cable properly. (p. 14)
– Connect USB memory device properly. Check that the USB memory device is
connected to the USB port or USB/BD STORAGE terminal of this Player. (p. 14)
– Check if the BD disc supports BD-Live.
– Check the setting for “Internet Connection”. (p. 29)
– Connect the USB memory device formatted in FAT16 or FAT32.
– It is recommended to connect the USB memory device with at least 2 GB of free space.
If there is not enough free space, format the USB memory device. (p. 29)
Cannot detect the DLNA server.
–
–
–
–
–
Cannot a play the file on the home
network server.
– Make sure the file is playable. (p. 3)
– Check your DLNA server’s setting.
– The playback and operating quality may be affected by your home network condition.
Connect the Network cable properly.
Turn on the connected equipment, such as broadband router or modem.
Connect the broadband router and/or modem properly.
Set the proper value(s) in the network setting. Check “Network”. (p. 29)
Connect the network cable properly.
Turn on the connected equipment, such as broadband router or the server.
Confirm the Player and the server are connected to the same access point.
Set the proper value(s) in the network setting. Check “Network”. (p. 29)
Depending on the DLNA server, the Player may need to be permitted from the server.
■ Messages on the screen
– The following messages appear on the TV screen in case the disc you tried to play back is not appropriate or the
operation is not correct.
Error message
Possible causes and solutions
Not Support This File!
– The file is not supported with this Player. See “Types of discs/files that can be used with this player”
(p. 3).
Wrong region code!
– The disc is an incompatible region code. See “Region management information” (p. 3).
Network has FAILED.
– This Player cannot be connected to the network. Check connection (p. 14) and Network setting (p. 29).
Network is OK, proxy has
FAILED.
– This Player cannot be connected to the proxy server. See “Proxy Setting” (p. 30).
36 En
Error message
Possible causes and solutions
The Setting is prohibited,
please setup again.
– BD-Live connection is prohibited. See “BD-Live Connection” (p. 30).
No valid upgrade file is
found!
– Check if the upgrade file is in the appropriate folder.
Upgrade has failed for some
reason!
– Upgrade is failed. Check if the upgrade file is corrupted or unreadable.
GLOSSARY
AVCHD
AVCHD is a new format (standard) for high definition
video cameras that can be used to record and play highresolution HD images.
BD-Live
BDMV
BDMV (Blu-ray Disc Movie, BD-MV) refers to one of
the application formats used for BD-ROM which is one
of the Blu-ray Disc specifications. BDMV is a recording
format equivalent to DVD-Video of the DVD
specification.
BONUSVIEW
BONUSVIEW compatible discs let you simultaneously
enjoy video sub-channel for two screens, audio subchannel and sub-titles. A small screen appears within
the main screen during playback (Picture in Picture).
BUDA (Binding Unit Data Area)
It is used as an auxiliary memory when Blu-ray Disc is
played back.
Closed caption
Closed captions are kind of subtitle, and the difference
between subtitles and captions is that subtitles are
intended for hearing persons and captions are for the
hearing impaired. Subtitles rarely show all of the audio.
For example, captions show sound effects (e.g., “phone
ringing” and “footsteps”), while subtitles do not. Before
you select this setting, please ensure that the disc
contains closed caption information.
Color Space
Color Space is a color range that can be represented.
RGB is a color space based on the RGB color model
(red, green and blue) and is typically used for PC
monitors. YCbCr is a color space based on a luminance
signal (Y) and two color difference signals (Cb and Cr).
Deep Color
Dolby Digital Plus
A sound system developed as an extension to Dolby
Digital. This audio coding technology supports 7.1
multi-channel surround sound.
Dolby TrueHD
Dolby TrueHD is a lossless coding technology that
supports up to 8 channels of multi-channel surround
sound for the next generation optical discs. The
reproduced sound is true to the original source bit-forbit.
DRC (Dynamic Range Control)
DRC lets you adjust the range between the loudest and
softest sounds (dynamic range) for playback at average
volume. Use this when it is hard to hear dialog, or
during times when playback may disturb neighbors.
5
DTS
This is a digital sound system developed by DTS, Inc.
for use in cinemas.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a new technology
developed for the next generation high definition optical
disc format.
DTS-HD Master Audio
DTS-HD Master Audio is a lossless audio compression
technology developed for the next generation high
definition optical disc format.
DTS-HD Master Audio | Essential
DTS-HD Master Audio | Essential is a lossless audio
compression technology developed for the next
generation high definition optical disc format.
HDMI
HDMI (High-Definition Multimedia Interface) is an
interface that supports both video and audio on a single
digital connection. The HDMI connection carries
standard to high definition video signals and multichannel audio signals to AV components such as HDMI
equipped TVs, in digital form without degradation.
Letterbox (LB 4:3)
A screen size with black bars on the top and bottom of
the image to allow viewing of wide-screen (16:9)
material on a connected 4:3 TV.
37 En
English
Deep Color refers to the use of various color depths in
displays, up from the 24-bit depths in previous versions
of the HDMI specification. This extra bit depth allows
HDTVs and other displays go from millions of colors to
billions of colors and eliminate on-screen color banding
for smooth tonal transitions and subtle gradations
between colors. The increased contrast ratio can
represent many times more shades of gray between
black and white. Also Deep Color increases the number
of available colors within the boundaries defined by the
RGB or YCbCr color space.
A sound system developed by Dolby Laboratories Inc.
that gives movie theater ambience to audio output when
the product is connected to a Dolby Digital processor or
amplifier.
ADDITIONAL INFORMATION
BD-Live compatible discs support all the functions of
BONUSVIEW while also enabling this Player to go
online and enjoy promotion videos and other data.
Dolby Digital
SPECIFICATIONS
Linear PCM Sound
Subtitles
Linear PCM is a signal recording format used for Audio
CDs and on some DVD and Blu-ray discs. The sound on
Audio CDs is recorded at 44.1 kHz with 16 bits. (Sound
is recorded between 48 kHz with 16 bits and 96 kHz
with 24 bits on DVD discs and between 48 kHz with 16
bits and 192 kHz with 24 bits on BD discs.)
Mac address
The Mac address is a unique value assigned to a network
device for identification purposes.
Pan Scan (PS 4:3)
A screen size that cuts off the sides of the image to allow
viewing of wide-screen (16:9) material on a connected
4:3 TV.
These are the lines of text appearing at the bottom of the
screen which translate or transcribe the dialog. They are
recorded on many DVD and BD discs.
Top menu
In a BD-Video/DVD-Video, this is the menu for
selecting things like the chapter to be played back and
the subtitle language. In some DVD-Videos, the top
menu may be called the “Title Menu”.
x.v.Color
x.v.Color reproduces a greater range of color than
before, showing almost all of the colors that the human
eye can detect.
SPECIFICATIONS
■ General
■ Input/output
Power supply
[U.S.A. and Canada models].................................. AC 110–240 V, 60 Hz
[Central and South America models]................AC 110–240 V, 50/60 Hz
[Australia model] ................................................... AC 110–240 V, 50 Hz
[Europe and Russia models] .................................. AC 110–240 V, 50 Hz
[Asia model]......................................................AC 110–240 V, 50/60 Hz
[China model] ........................................................ AC 110–240 V, 50 Hz
Power consumption (Normal) .............................................................. 30 W
Power consumption (Standby) .................................................... 1 W or less
Dimensions (W × H × D) ............................................. 435 × 86 × 257 mm
(17-1/8 × 3-3/8 × 10-1/8 in)
Weight ..................................................................................3.0 kg (6.6 lbs.)
HDMI output.............................................................. Type A connector × 1
480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz,
Deep Color, x.v. Color support
Component video output ..............................................Y: 1 Vp-p (75 ohms)
PB, PR: 0.7 Vp-p (75 ohms)
Video output......................................................................1 Vp-p (75 ohms)
Digital output ..........................................................Optical × 1, Coaxial × 1
Analog audio output .................................................................. L/R 2ch × 1
USB ............................................................................ Type A connector × 2
Other output equipments ............................................. Remote IN/OUT × 1,
Ethernet × 1
■ Audio performance
Audio output level (1 kHz, 0 dB, BD/DVD/CD-DA).................... 2 ± 0.3 V
Signal to nose ratio (BD/DVD/CD-DA) ..............................110 dB or more
Dynamic range (BD/DVD/CD-DA).................................... 100 dB or more
Harmonic distortion (1 kHz, BD/DVD/CD-DA) ................. 0.003 % or less
Frequency response
BD/DVD ............................................ 4 Hz to 22 kHz (48 kHz Sampling)
4 Hz to 44 kHz (96 kHz Sampling)
CD-DA ...............................................................................4 Hz to 20 kHz
38 En
Specifications are subject to change without notice.
SPECIFICATIONS
■ Copyright
Fonts are (c) Bitstream (see below). DejaVu changes are in public domain.
Glyphs imported from Arev fonts are (c) Tavmjong Bah (see below)
Bitstream Vera Fonts Copyright
-----------------------------Copyright (c) 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a
trademark of Bitstream, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts
accompanying this license (“Fonts”) and associated documentation files (the “Font
Software”), to reproduce and distribute the Font Software, including without limitation
the rights to use, copy, merge, publish, distribute, and/or sell copies of the Font
Software, and to permit persons to whom the Font Software is furnished to do so,
subject to the following conditions:
The above copyright and trademark notices and this permission notice shall be included
in all copies of one or more of the Font Software typefaces.
The Font Software may be modified, altered, or added to, and in particular the designs
of glyphs or characters in the Fonts may be modified and additional glyphs or
characters may be added to the Fonts, only if the fonts are renamed to names not
containing either the words “Bitstream” or the word “Vera”.
This License becomes null and void to the extent applicable to Fonts or Font Software
that has been modified and is distributed under the “Bitstream Vera” names.
The Font Software may be sold as part of a larger software package but no copy of one
or more of the Font Software typefaces may be sold by itself.
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT,
TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE
GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO
USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT
SOFTWARE.
5
ADDITIONAL INFORMATION
Except as contained in this notice, the names of Gnome, the Gnome Foundation, and
Bitstream Inc., shall not be used in advertising or otherwise to promote the sale, use or
other dealings in this Font Software without prior written authorization from the Gnome
Foundation or Bitstream Inc., respectively. For further information, contact: fonts at
gnome dot org.
Arev Fonts Copyright
-----------------------------Copyright (c) 2006 by Tavmjong Bah. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts
accompanying this license (“Fonts”) and associated documentation files (the “Font
Software”), to reproduce and distribute the modifications to the Bitstream Vera Font
Software, including without limitation the rights to use, copy, merge, publish,
distribute, and/or sell copies of the Font Software, and to permit persons to whom the
Font Software is furnished to do so, subject to the following conditions:
The above copyright and trademark notices and this permission notice shall be included
in all copies of one or more of the Font Software typefaces.
The Font Software may be modified, altered, or added to, and in particular the designs
of glyphs or characters in the Fonts may be modified and additional glyphs or
characters may be added to the Fonts, only if the fonts are renamed to names not
containing either the words “Tavmjong Bah” or the word “Arev”.
This License becomes null and void to the extent applicable to Fonts or Font Software
that has been modified and is distributed under the “Tavmjong Bah Arev” names.
The Font Software may be sold as part of a larger software package but no copy of one
or more of the Font Software typefaces may be sold by itself.
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT,
TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL TAVMJONG BAH BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING
ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE
FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.
Except as contained in this notice, the name of Tavmjong Bah shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Font Software
without prior written authorization from Tavmjong Bah. For further information,
contact: tavmjong @ free. fr.
39 En
English
– Audio-visual material may consist of copyrighted
works which must not be recorded without the
authority of the owner of the copyright. Refer to
relevant laws in your country.
– This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be authorized
by Rovi Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi Corporation. Reverse
engineering or disassembly is prohibited.
– Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
– Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide
patents issued & pending. DTS is a registered
trademark and the DTS logos, Symbol, DTS-HD and
DTS-HD Master Audio | Essential are trademarks of
DTS, Inc. ©1996-2008 DTS, Inc. All Rights Reserved.
–
is a trademark.
– “BD-LIVE” logo is a trademark of Blu-ray Disc
Association.
– “BONUSVIEW” is a trademark of Blu-ray Disc
Association.
–
is a trademark of DVD Format/Logo
Licensing Corporation.
– HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
– “x.v.Color” and “x.v.Color” logo are trademarks.
– “AVCHD” and the “AVCHD” logo are trademarks
of Panasonic Corporation and Sony Corporation.
– Java and all Java-based trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or other
countries.
– This product is licensed under the AVC patent
portfolio license and VC-1 patent portfolio license
for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the
AVC Standard and VC-1 Standard (“AVC/VC-1
Video”) and/or (ii) decode AVC/VC-1 Video that
was encoded by a consumer engaged in a personal
and non-commercial activity and/or was obtained
from a video provider licensed to provide AVC/VC1 Video. No license is granted or shall be implied for
any other use. Additional information may be
obtained from MPEG LA, LLC.
See http://www.mpegla.com.
– DLNA and DLNA CERTIFIED are trademarks and/
or service marks of Digital Living Network Alliance.
– Netflix and the Netflix logo are the registered
trademarks of Netflix, Inc.
■ About fonts
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION:
LASER RADIATION WHEN OPEN.
DO NOT STARE INTO BEAM.
DANGER:
LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO THE BEAM.
LASER Specification:
Class 1 LASER Product
Wave length: 790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser output: max. 1 mW
LASER SAFETY
This unit employs a laser. Due to possible eye injury, only
a qualified service person should remove the cover or
attempt to service this device.
DANGER
This unit emits visible laser radiation when open. Avoid
direct eye exposure to beam. When this unit is plugged
into the wall outlet, do not place your eyes close to the
opening of the disc tray and other openings to look into
inside.
© 2010 Yamaha Corporation
Printed in China
BD-S667_U