SpeedDome® Ultra VI
Extended Security Technologies™
Features
Wide Dynamic Range
Infrared mode
• Compact, attractive, low-profile
design
• Supports SensorNet, RS422, and
Manchester protocol
• Continuous autofocus
• Two mounting base options
• Proportional high speed pan/tilt • On-screen direction indicators
• Advanced DSP CCD camera
• 23X optical zoom with 8X
digital magnifier (184X total
zoom)
• Zoom Adjusted Programming
• Dome-generated on-screen text
• Open shutter to capture images
in very low light
• Up to eight privacy zones
• Programmable Presets, Patterns
and Area names
• 96 Presets (controller dependent)
• Alarm inputs and outputs
• Password protection and
automatic home position
• Automatic proportional flip and
Automatic Gain Control,
line-lock and white balance
(user selectable on/off)
The SpeedDome Ultra VI Advanced Programmable Dome Camera is a state-of-the-art programmable dome
that incorporates all of the industry's cutting edge dome features. The dome's internal multi-protocol
receiver enables the dome to be connected directly to a host of systems.
The camera’s 23X optical zoom, combined with its 8X digital zoom, provides the power of 184X total
zoom. And the sixth generation digital signal processing (DSP6) provides enhanced clarity, color and
detail.
Privacy zones can be set up to prevent users from viewing sensitive areas. The direction indicators, which
can be displayed on the monitor, denote the direction the dome is pointing, the direction in which it is
moving, and the dome’s azimuth (degree of tilt).
The dome supports up to 16 user-definable Areas. The dome’s advanced alarm handling enables alarms to
be processed internally by the dome, externally by the controller, or by both the dome and the controller.
A “home position” feature allows users to establish a default view or pattern when no one is using it.
SpeedDome Ultra VI provides two "twist-lock" mounting base options. The standard base is the low-cost
mounting base alternative; the I/O board base provides unsurpassed ease of installation, service, and
maintenance. The SpeedDome Ultra Outdoor Housing is available to extend surveillance to outdoor
environments.
The SpeedDome Ultra VI is a part of Sensormatic’s Extended Security Technologies™ suite of integrated
products and services.
www.sensormatic.com
Select from a choice of two mounting base options – an I/O base or a standard base
FEATURES
The camera’s new 23X optical zoom is combined with an 8X digital
magnifier, providing the power of 184X total zoom.
User selectable and automatic Wide Dynamic Range Modes.
• The dome’s advanced low-light performance can clearly distinguish
scenes and colors in lighting conditions as low as 0.5 lux.
Light levels as low as 0.01 lux in black & white Infrared mode and
0.009 lux in black & white mode with an open shutter.
• Privacy zones can be set up to prevent users from viewing sensitive areas.
These privacy zones do not interfere with normal surveillance operations
because they block out only the sensitive areas – even one as small as a
combination lock – rather than the entire scene.
• The dome can display its direction indicators on the monitor. These
indicators show users the direction the dome is currently pointing, as
well as the direction in which it is moving. In addition, the direction
indicators display the dome’s azimuth (degree of tilt).
• Users can adjust the white balance manually or have the camera set
it automatically. White balance is normally compensated for by the
Automatic Tracing White Balance (ATW); however, in some lighting
conditions it may be necessary to manually adjust the red and blue
settings for optimal viewing.
• Users can set the Automatic Gain Control (AGC) on/off, and when it is
turned off, users can manually set the gain to a desired dB level offset.
AGC helps compensate for low lighting conditions that could result in
poor video.
• Zoom Adjusted Program (ZAP) automatically adjusts pan and tilt speeds
in proportion to zoom position, even at 184X magnification.
• Users can program zoom pause as well as maximum zoom stop settings.
The default zoom pause is 35X and the default zoom stop is 92X.
• Focus Preference provides continuous autofocus with manual override.
• Users can set automatic dome flip on/off. With this feature turned on,
the dome will automatically turn 180° when the camera tilts to its lower
limits and stays in that position for a brief speed-proportional delay.
With this feature turned off, users can still manually flip the dome.
• The dome supports up to three Patterns. Preprogrammed default spiral
pan pattern ("apple peel") covers the entire viewing area.
• The dome supports up to 96 Presets when used with suitably
equipped controllers.
• Alarms can be processed internally by the dome, externally by the
controller, or by both the dome and the controller. Each of the dome’s
alarm inputs can automatically call a Preset or run a Pattern when the
alarm is activated.
• The dome supports up to 16 Areas. Users can assign names (up to
19 characters long) and boundaries to these Areas; each Area can be a
different size.
• “Home position” is the position that a dome returns to after it remains
inactive for a specific period of time. This ensures that even when the
dome is unattended, it will always be pointing to a key area of the facility.
The user can define that Preset or Pattern, and also how long
(from 1 to 60 minutes) before a dome returns to its home position.
• The dome generates on-screen text, including Dome, Area, Preset,
Pattern, and Alarm names, as well as direction indicators. On-screen
text also indicates zoom, focus, and iris status. All name information is
user-definable and can be turned on or off at the user’s discretion.
• The overlay text is user selectable: solid or translucent white, and with
or without black outline.
www.sensormatic.com
• On-screen text supports six languages: English, French, Italian, Spanish,
German and Portuguese.
• In order to prevent unauthorized use of the configuration utility, the
dome offers password protection.
• The dome incorporates an innovative twist-lock release from the
mounting base for easy installation and servicing.
• The fully isolated power supply helps eliminate ground loops.
• Users can set line-lock on or off. Line-lock is enabled to help prevent
vertical rolling in multi-camera applications.
• Vertical sync phase adjustment is provided to help compensate for
different phases of power when line-lock is enabled, making it ideal for
single and multi-phase power installations.
• Sensing of 50/60 Hz line is automatic and does not require
manual adjustment.
• Surge protection.
Allows daisy chain configuration of control wiring.
– For RS422: 10 domes at a maximum distance of 1 km (3000 ft) on,
two 22 AWG shielded twisted pairs (STP).
– For SensorNet: 32 devices at a maximum distance of 1 Km (3000 ft)
on one 22 AWG unshielded twisted pair (UTP).
– For Manchester: 3 domes at a maximum distance of 1500 meters
(5000 ft) on one 18 AWG shielded twisted pair (STP).
• The outstanding surveillance and performance features of the
SpeedDome Ultra VI can be extended to outdoor environments via the
SpeedDome Ultra Outdoor Housing. The outdoor housing, designed
especially for the SpeedDome Ultra’s small, unobtrusive size, makes it
the perfect protection for the dome.
TWO MOUNTING BASE OPTIONS
The housing/eyeball assembly twist-locks into both mounting bases.
The I/O board base connects the housing/eyeball assembly in one step.
Power, communication, and video cables (or composite cable) are
connected one time to an I/O PC board in the mounting base, so the
assembly is simply “twist-locked” onto the base. Service and maintenance
are extremely easy and can be accomplished – without a ladder or lift –
via the Installation/Removal Tool. The I/O board mounting base supports
four alarm inputs and four alarm outputs.
The standard base connects the housing/eyeball assembly in two steps.
First, power, communication, and video cables (or composite cable) are
inserted through the base and attached to the assembly. Then the assembly
is connected to the base. The standard mounting base supports one alarm
input and one alarm output. The Installation/Removal Tool cannot be
used to install this configuration.
Mounting
Base with
Integral
I/O Board
Lanyard
Housing
and Eyeball
Assembly
Standard
Mounting
Base
Connectors
Plug into
Housing/
Eyeball
Assembly
Housing
and Eyeball
Assembly
SpeedDome Ultra VI provides you with the power of a 184X Zoom with Continuous Autofocus
SPECIFICATIONS
Operational
Manual Pan/Tilt Speed .......................... 1° to 100° per second (based on
zoom position)
Preset Pan/Tilt Speed .............................. 220° per second, maximum
Pan Travel ................................................... 360° continuous
Tilt Travel ................................................... 105°
Pan/Tilt Accuracy .................................... ± 0.5°
Zoom/Focus Accuracy ............................ ± 0.5%
Total Zoom ................................................ 184X
Optical Zoom ............................................ 23X
Digital Zoom ............................................. 8X
Zoom Pause ............................................... 23X or 35X (default)
Zoom Stop ................................................. Selectable: 23X, 35X (zoom pause
default), 46X, 69X, 92X (zoom stop
default), 115X, 138X, 161X, 184X
Programmable Presets
VM16/ADTT16 (SensorNet) ............ 96
VM16/ADTT16
(with Code Converter) ........................ 96
VM32/AD32 (SensorNet) .................. 96
VM32/AD32
(with Code Converter) ........................ 96
AD2150 (Manchester) ........................ 64
AD2150 (RS422 via
AD2083-02A) ........................................ 16
VM96 ....................................................... Unlimited
AD168 (Manchester via
CCM or AD2091) ................................. 64
AD168 (RS422 via CCM) ................... 64
AD168 (RS422 via
AD2083-02A) ........................................ 16
AD168 (SensorNet via CCM) ........... 64
MegaPower 1024 (Manchester
via AD2091) ........................................... 64
MegaPower 1024 (RS422 via
AD2083-02A) ........................................ 16
MegaPower 48 (SensorNet) ............... 96
MegaPower 48 (Manchester) ............ 64
MegaPower 48 (RS422) ...................... 96
Programmable Patterns ......................... 3
Programmable Areas ............................... 16
Programmable Privacy Zones ............... 8
Direction Indicators ................................ Yes
Auto Synchronization
Line-Locked ........................................... Remote V-phase adjustment
Internal ................................................... Built-in sync generator
Address Range
RS422 ...................................................... 1-99
Manchester ............................................ 1-64
SensorNet ............................................... 1-255
Alarm Inputs
With I/O Board ..................................... 4 dry contacts/3.5 mA sink
Without I/O Board .............................. 1 dry contact/3.5 mA sink
Alarm Outputs
With I/O Board (40 mA) .................... 4 open-collector drivers at 12 VDC
Without I/O Board (40 mA) ............. 1 open collector driver at 12 VDC
Menu Languages ...................................... English, French, German, Italian,
Spanish, Portuguese
Electrical
Input Voltage ............................................ 24 to 30 VAC, 50/60 Hz Class 2 LPS
Design Tolerance ...................................... 20 to 36 VAC, 50/60 Hz
Power ........................................................... 16 watts
Power On In-Rush Current ................... 1.5 amps
Surge Protection
Video ........................................................ Series resistor of 3.9 Ω;
low-capacitance Zener suppressor
of 6.5 V, 1500 watts
SensorNet/Manchester ...................... Isolation transformer coupled,
2000 Vrms; PTC resettable fuse
protects transformer; TVS rated at
5.6 V, 40 A, 0.1 joules; 10 kA impulse
rated gas tube
RS422 ...................................................... Series resistors of 33 Ω; TVS rated at
5.6 V, 40 A, 0.1 joules
Alarm Input ........................................... Series resistors of 33 Ω; TVS rated at
5.6 V, 40 A, 0.1 joules
Power Line .............................................. TVS rated at 60 V, 250 A, 1.5 joules
Cameras
Imager ......................................................... Interline transfer 1/4 inch
CCD array
Scanning System ...................................... 2:1 interlace
Video Output ............................................ 1.0 Vp-p, 75 Ω composite
S/N Ratio .................................................... 50 dB (typical)
Horizontal Resolution ........................... 470 lines at center
Minimum Illumination ......................... Better than 1.0 lux (20 IRE, AGC) on
.5 lux with open shutter
.01 lux in black and white IR mode
.009 lux in black and white mode
with open shutter
White Balance ........................................... Through the Lens (TTL) Automatic
Tracing White Balance (ATW)
NTSC
Effective Pixels ...................................... 768 (H) x 494 (V) pixels
Scanning ................................................. 525 lines, 60 fields, 30 frames
Horizontal .............................................. 15.734 kHz
Vertical .................................................... 59.9 Hz
PAL
Effective Pixels ...................................... 752 (H) x 582 (V) pixels
Scanning ................................................. 625 lines, 50 fields, 25 frames
Horizontal .............................................. 15.625 kHz
Vertical .................................................... 50 Hz
Lens
Design ......................................................... Aspherical
Focal Length .............................................. 3.6 to 82.8 mm
Aperture ...................................................... f1.6
4 mm ........................................................ 54.0° (H) x 40.5° (V)
88 mm ..................................................... 2.5° (H) x 1.9° (V)
Field of View Formulas
Horizontal View = (.845 x A) / B, Vertical View = (.634 x A) / B
A = distance from camera in meters or feet, B = zoom power (e.g. 23X)
Mechanical
Height .......................................................... 205 mm (8 in)
Diameter ..................................................... 120 mm (4.7 in)
Weight
Housing and Eyeball ............................... 1.18 kg (2.6 lbs)
Base (standard) ..................................... 0.09 kg (0.20 lbs)
Base (with I/O board) ......................... 0.16 kg (0.35 lbs)
SpeedDome Ultra VI’s Wide Dynamic Range capability enables it to see images in virtual darkness
MOUNTS AND ADAPTERS
Environmental
Operating Temperature ......................... -10° to 50° C (14° to 122° F)
Relative Humidity .................................... 0 to 95% (non-condensing)
Storage Temperature .............................. -20˚ to 65˚C (-4˚ to 149˚F)
Regulatory
Emissions ................................................... FCC: 47 CFR Part 15,
Subpart B Class A
CE: EN55022 Class B
CE: EN6100-3-2
CE: EN6100-3-3
AS/NZS 3548, Class A
CISPR22
ICES-003
Immunity ................................................... CE: EN50130-4
Safety ........................................................... UL: UL1950
cUL: CSA 22.2 No. 950
CE: EN60950, IEC950
For outdoor mounting structures, refer to the “SpeedDome Ultra
Series Outdoor Housing” data sheet. The “Dome Mounts” data sheet
contains detailed information, e.g. dimensions, weight, materials, etc., for
all outdoor mounts and adapters.
RHIUTH
RHIUHC
Top Hat housing with trim ring
Hard ceiling bracket (requires RHIUTH)
RHIUFB
RHIUAB
RHIU2X2M
Fixed bracket
Adjustable bracket
2’ x 2’ Tile mount (Top Hat included)
(both brackets require RHIUTH)
RHIU2X2P*
2’ x 2’ Tile pendant mount
Product Codes
RHINCM*
Ceiling pendant mount
(this mounting assembly includes both a ceiling flange
and a pendant base)
Housing/Eyeball Assembly Without Mounting Base
Color NTSC (black camera body) ............. RAS816LS
Color NTSC (white camera body) ............ RAS816WLS
Color PAL (black camera body) ................. RAS816LS-1
Mounting Base Without Housing/Eyeball Assembly
Standard Base (black base) ..................... RUPTB
Standard Base (white base) ..................... RUWPTB
I/O Board Base (black base) ................... RUIOB
I/O Board Base (white base) ................... RUWIOB
RHIUPNDT*
RHIUIBM*
Ceiling pendant mount
I-Beam mount assembly
(this mounting assembly does not include a
ceiling flange; it only includes a pendant base)
The dome can also be ordered pre-configured with the mounting base of preference.
Dome With Standard Base
Color NTSC (black assembly & base) ....... RAS816LSP
Color NTSC (white assembly & base) ....... RAS816WLSP
Color PAL (black assembly & base) ........... RAS816LSP-1
Dome With I/O Board Base
Color NTSC (black assembly & base) ....... RAS816LSI
Color NTSC (white assembly & base) ....... RAS816WLSI
Color PAL (black assembly & base) ........... RAS816LSI-1
RHIUIB*
RHIUTBAR
I-Beam clamp
T-Bar mount
RHIUCM*
RHIULWM*
Wall/corner mount
Long 0.6 m (24 in) wall/corner mount
Options
Optional Bubbles for Top Hat Mount
RUCLR .................................................... Clear Bubble (f1.0)
RUSLV ..................................................... Silver Bubble (f1.5 - f2.0)
RUSMK ................................................... Smoked Bubble (f1.0)
RUGLD ................................................... Gold Bubble (f1.5 - f2.0)
RHIU3X3*/RHIU4X4*
RHSDA
3” x 3”/4” x 4” mounting plate
SpeedDome housing adapter
ADCBRD
* RHIUTH Top Hat housing/dome
assembly also mounts to structure.
Note: Bubble diameter = 176 mm (6.93 in); bubble depth = 86.5 mm (3.4 in);
bubble weight = 4.4 oz (with trim ring).
Installation and Removal Accessory
RHIRT ..................................................... Installation and Removal Tool
Cobra Dome Back Box adapter bracket
Product specifications and availability subject
to change without notice.
Certain product names mentioned herein may be trade names
and/or registered trademarks of other companies.
Sensormatic Electronics Corporation
951 Yamato Road, Boca Raton, Florida, 33431, U.S.A.
Telephone: 561.989.7000 Toll Free: 800.368.7262
VSD109-01-C 07/01 L
©2001 Sensormatic Electronics Corporation