Philips 32PFL3506/F7 User manual

Register your product and get support at
www.philips.com/support
32PFL3506
EN: For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S.Virgin Islands, contact Philips
Customer Care Center at 1-866-309-0841
• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00
Enter below the model and serial numbers located on the back and right side of the TV cabinet.
EN User Manual
FR Manuel d’Utilisation
FR: Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de
votre pays.
• Pour obtenir de l’aide aux États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines,
communiquez avec le centre de service à la clientèle Philips au : 1-866-309-0841
• Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips à
01 800 504 62 00
Entrer ci dessous le modèle et le numéro de série situés dérrière à droite sur le dos du téléviseur.
ES Manual del Usuario
ES: Para obtener más información, llame al servicio de soporte al cliente de su país.
• Para obtener asistencia en los Estados Unidos, en Canadá, Puerto Rico o en las Islas
Vírgenes de los Estados Unidos, comuníquese con Centro de atención al cliente de Philips al
1-866-309-0841
• Solo para Mexico CENTRO DE ATENCIÓN A CLIENTES LADA. 01 800 504 62 00 Solo
Para México.
Escriba a continuación el modelo y número de serie que estan localizados en lado derecho y parte
posterior de el gabinete de el televisor.
Lea esta manual antes de usar el producto
MODEL NUMBER
SERIAL NUMBER
1 Notice
2 Important
Product information
Screen care
Environmental care
Regulatory notices
3 Your TV
Side controls and indicators
Remote control
4 Get started
Supplied accessories
Mounting stand onto TV
Positioning the TV
Installing the remote control batteries
Connecting the antenna or cable
Managing cables
Plugging in the AC power cord
Switching on and initial setup
5 Use your TV
Switching on your TV and putting it in standby mode
Switching channels
Adjusting volume
Still mode
Watching channels from a set-top box
Watching connected devices
Watching a Blu-ray disc
Switching audio mode
6 Use more of your TV
Changing picture and sound settings
Sleeptimer
Child and rating locks
Closed caption
EasyLink
ECO
Set your location to home
Viewing photos and watching videos
on a USB storage device
7 Install channels
Selecting your menu language
Autoprogram
Channel list
Add channels
Optimizing the signal quality from your antenna
8 Upgrade your TV software
Checking your current software version
Preparing for the software upgrade
Upgrading software
4
5
5
5
5
5
6
6
6
8
8
8
8
8
9
10
10
11
9 Connect devices
27
27
28
29
Connection overview
Selecting your connection quality
Connecting your devices
10 Troubleshooting
31
31
31
Downloading an electronic copy
Contact us
11 Notes for the use of USB devices
32
12 Specifications
32
13 Warranty
33
14 Index
34
12
12
12
13
13
13
13
14
14
15
15
18
18
20
21
21
21
22
24
24
24
25
25
25
26
26
26
26
EN
1
English
Contents
Return your Product Registration Card or register online at
www.philips.com/support today to get the very most from your purchase.
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete
and return your Product Registration Card at once, or register online at www.philips.com/support to ensure:
*Product Safety Notification
*Additional Benefits
By registering your product, you'll receive notification
- directly from the manufacturer - in the rare case of
a product recall or safety defect.
Registering your product guarantees that you'll
receive all of the privileges to which you're
entitled, including special money-saving offers.
Know these
safety symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indicates uninsulated material
within your unit may cause an electrical shock. For the
safety of everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention to features for
which you should read the enclosed literature closely to
prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et
pousser jusqu’au fond.
Visit our World Wide Web Site at http://www.philips.com/support
2
EN
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and third grounding prong. The wide
blade or third prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. This product may contain lead or mercury. Disposal of these materials
may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the
Electronic Industries Alliance: www.eiae.org.
16. Damage Requiring Service - The appliance should be serviced by
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
English
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of its
cabinets design.
• Do not compromise these design standards by applying excessive pull
force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product damage
and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be mounted to a
wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mats and
supporting structure grounding of the lead-in wire to an antennadischarge unit, size of grounding connectors, location of antennadischarge unit, connection to grounding electrodes and requirements for
the grounding electrode. See Figure below.
21. Objects and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through openings.
a) Warning: To reduce the risk of fire or electric shock, this apparatus
should not be exposed to rain or moisture and objects filled with
liquids, such as vases should not be placed on this apparatus.
22. Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - alignment as marked on the
unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.)
• Remove batteries when the unit is not used for a long time.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE (NEC)
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Note to the CATV system installer: this reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.
EN
3
1 Notice
Specifications are subject to change without notice. Trademarks are
the property of Koninklijke Philips Electronics N.V. or their respective
owners. P&F USA reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the intended use
of the system. If the product, or its individual modules or procedures,
are used for purposes other than those specified herein, confirmation
of their validity and suitability must be obtained. P&F USA warrants
that the material itself does not infringe any United States patents. No
further warranty is expressed or implied.
P&F USA cannot be held responsible neither for any errors in the
content of this document nor for any problems as a result of the
content in this document. Errors reported to P&F USA will be adapted
and published on the P&F USA support website as soon as possible.
Pixel characteristics
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural property of the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Service
Centers and official repair shops. Failure to do so shall void any
warranty, stated or implied.
Any operation expressly prohibited in this manual, any adjustments, or
assembly procedures not recommended or authorized in this manual
shall void the warranty.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician
for help.
Declaration of Conformity
Trade Name :
PHILIPS
Responsible Party : P&F USA, Inc.
Model :
32PFL3506
Address :
PO Box 430 Daleville, IN 47334-0430 U.S.A.
Telephone Number : 1-866-309-0841
4
EN
Modifications
The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by Philips Consumer
Electronics may void the user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canadian notice
Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Copyright
All other registered and unregistered trademarks are the property of
their respective owners.
HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are tr ademar ks or
registered trademarks of HDMI Licensing LLC
in the United States and other countries.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
® Kensington and Micro Saver are registered
US trademarks of ACCO World corporation
with issued registrations and pending
applications in other countries throughout the
world.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television viewing for
children younger than two years of age.
Environmental care
English
2 Important
Registering your model with Philips makes you eligible for all of the
valuable benefits listed below, so don’t miss out.
Complete and return your Product Registration Card at once, or
register online at www.philips.com/support to ensure :
•
•
Product Safety Notification
By registering your product you receive notification - directly from
the manufacturer - in the rare case of a product recall or safety
defect.
Additional Benefits of Product Ownership
Registering your product guarantees that you receive all of the
privileges to which you’re entitled, including special money-saving
offers.
The packaging of this product is intended to be recycled. Contact your
local authorities for information about how to recycle the packaging.
For product recycling information, please visit - www.recycle.philips.com
End of life directives
For further assistance
For further assistance, call the customer support service in your country.
•
To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S.
Virgin Islands, contact Philips Customer Care Center at
1-866-309-0841
Product information
This TV consumes minimal energy in standby mode to minimize
environmental impact. The active power consumption is given on the
type plate at the back of the TV. The model and serial numbers of your
TV can be found on the back and right side of the TV as well as on the
packaging.
Screen care
•
•
•
•
•
Avoid stationary images as much as possible. Stationary images
are images that remain on-screen for extended periods of time.
Examples include : on-screen menus, black bars and time displays.
If you must use stationary images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV screen and frame with a soft cloth. Never use
substances such as alcohol, chemicals or household cleaners on the
TV screen.
Risk of damage to the TV screen! Never touch, push, rub or strike
the screen with any object.
To avoid deformations and color fading, wipe off water drops as
soon as possible.
This LCD TV contains a lamp with Mercury, please dispose of according
to all local, state and federal laws.
Philips pays a lot of attention to produce environment-friendly products
in green focal areas. Your new TV contains materials which can be
recycled and reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and
cadmium. Nevertheless, in many areas batteries may not be disposed
of with your household waste. Please ensure you dispose of batteries
according to local regulations.
Regulatory notices
Warning
To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or
moisture. Objects filled with liquids, such as vases, should not be placed on this apparatus.
Caution
To prevent electric shock, match the wide blade of the plug to the wide slot, fully inserted.
Do not place the unit on the furniture that is capable of being tilted by
a child and an adult leaning, pulling, standing or climbing on it.
A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this apparatus.
EN
5
3 Your TV
Remote control
Congratulations on your purchase, and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.philips.com/support
a
Side controls and indicators
b
c
s
e
r
q
p
*
d
e
d
f
c
b
g
o
h
n
i
a
a Standby indicator / remote control sensor
b . POWER
Switches the TV on or puts it in standby mode. The TV is not
powered off completely unless it is physically unplugged.
c CHANNEL + / −
Switches to the next or previous channel.
j
d MENU
Toggles the main menu on or off.
k
e VOLUME + / −
Increases or decreases volume.
m
*This button does not function on this unit.
6
EN
l
English
a . (Standby-On)
Switches the TV on or puts it in standby mode. The TV is not
powered off completely unless it is physically unplugged.
b SOURCE
Selects connected devices.
c FORMAT
Selects a picture format (see ‘Changing picture format’ on page 16).
d SAP
Digital Mode (DTV)
• Press to select the audio language.
Analog Mode (TV)
• Press to select the audio mode.
e FREEZE
Press to pause screen image.
f OK
Activates a selection or accesses the menu.
g Î ï Í Æ (Navigation buttons)
Navigates through the menus.
h INFO
Displays information about the TV channel or accessory device.
The quality and accuracy of the information depends on the
broadcaster. You might see a difference in broadcast time if the
broadcast is from a different time zone.
i CH + / −
Switches to the next or previous channel.
j MUTE
Mutes or unmutes audio.
k Number buttons
Select a channel, page or setting.
l
• (Dot)
Press the dot (•) for digital channels.
m PREV CH
Returns to the previously viewed channel.
n VOL + / −
Increases or decreases volume.
o MENU / EXIT
Turns the menu on or off.
p BACK
Returns to a previous screen.
q AUTO SOUND
Cycles through preset sound settings
(see ‘Changing auto sound mode’ on page 17).
r AUTO PIC
Cycles through preset picture settings
(see ‘Changing auto picture mode’ on page 15).
s SLEEP
Sets a delay after which the TV switches to standby.
EN
7
4 Get started
Positioning the TV
Warning
• Do not insert the AC power cord into the power socket outlet before all the
Supplied accessories
•
•
•
•
•
•
connections are made.
• Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.
• Before you move the TV, disconnect attached cables to prevent damage to connectors.
Remote Control
2 x AAA, 1.5V Batteries
M4 x 14 double sems screw x 3
Cable management tie
User Manual
Quick Start Guide
Mounting stand onto TV
Applicable to TVs without mounted stands.
1
In addition to reading and understanding safety instructions, consider
the following before positioning your TV :
• Ensure that you always have easy access to the AC power cord or
plug to disconnect the TV from the power.
• If the TV is mounted on a swivel base, ensure that no strain is
placed on the AC power cord when the TV is swiveled. Strain on
the AC power cord can loosen connections.
• The ideal viewing distance for watching TV is three times its screen size.
• Position the TV where light does not fall on the screen.
• Connect your devices before you position the TV.
Using a Kensington lock
There is a Kensington security slot on the back of the TV. Prevent theft
by looping a Kensington lock between the slot and a permanent object,
such as a heavy table.
2
Installing the remote control batteries
x3
Note
• To wall mount the TV, refer to the Quick Start Guide.
• If you lose the stand mounting screws, please purchase 3 Phillips head screws
(M4 × 14) at your local store.
1
2
3
Slide the battery cover off the back of the remote control.
Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −
ends of the batteries line up with the markings inside the case.
Slide the cover back into position.
Note
• Remove the batteries if not using the remote control for an extended period of time.
8
EN
Connecting the antenna or cable
If you connect a set-top box through RF IN / OUT
English
If the TV is connected to a cable box or satellite set-top box via a
coaxial connection, set the TV to channel 3 or 4, or to the channel
specified by the service provider.
cable
antenna
t
antenna
t
RF cable
set-top box
IN
IN
RF cable
IN
OUT
If you connect to an antenna
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
Contact your local content provider or your local electronics retailer if
you are unsure about what HDTV programs are available in your area.
Broadcasters are transitioning from analog to digital TV. This means that
a given broadcaster can have channels available either in analog or in
digital, or both analog and digital at the same time.
If you connect a set-top box through HDMI
If the TV is connected to a cable box or satellite set-top box via HDMI,
make sure you select the correct HDMI source by using SOURCE on
this unit’s remote control.
The TV produces stereo sound only if a stereo signal is broadcast.
If you connect to a cable
When your TV is connected to the cable socket, you might receive free
digital and high definition programs (depending on your cable provider).
The channel number for digital and high definition channels includes a
dot “•”. For example, 11.1, 46.30, 108.201. Contact your cable provider
for more information.
RF cable
set-top box
IN
OUT
IN
If you connect to a DBS (Direct Broadcast Satellite)
There are two main DBS systems : DirecTV and DishNetwork. These
systems require a separate, proprietary set-top box to decode signals
and send them to the TV. The set-top box contains a digital TV tuner for
receiving off-air digital broadcasts.
Contact your local DBS provider for more information about the
connections and the TV channels.
HDMI
If you connect a set-top box through component video input
If the TV is connected to a cable box or satellite set-top box via
component video input, make sure you select the correct component
video source by using SOURCE on this unit’s remote control.
If you connect to a set-top box
A cable box or satellite set-top box can be connected to the TV
through the following connections :
• ANT
• A/V (Composite Video and Audio)
• S-Video
• YPbPr (Component Video Input)
• HDMI
For information about how to connect a set-top box, see the Quick
Start Guide provided.
RF cable
audio L/R
set-top box
IN
OUT
IN
OUT
YPbPr
YPbPr
EN
9
Managing cables
Route your antenna cable and all other cables through the cable
management tie at the back of the TV. The holder helps keep your
cables tidy and easily manageable.
1
Attach the cable management tie as illustrated below.
2
Pass cables through the cable management tie to avoid tangles.
10
EN
Plugging in the AC power cord
Warning
• Verify that your power voltage corresponds with the voltage printed at the back of the
TV. Do not insert the AC power cord if the voltage is different.
Connect the AC power cord plug to the power outlet. Ensure that the
cord is tightly secured.
Press Í or Æ 5 times to select the side of the pictures that is the most
pleasing to you. then press OK.
Before you switch on the TV, check that the AC power cord is properly
connected. Press . POWER at the right side of the TV, or press . on
the remote control. The TV normally takes 25-30 seconds to start up
and the following screen appears the first time you turn on the TV.
Left side
Right side
Initial Setup
Select your menu language.
English
Seleccione el idioma para el menú.
Español
Sélectionnez la langue du menu.
Français
1/5 Select the picture setting that you prefer.
Select
OK
Next
BACK
Back
MENU
Exit
Press OK to finish [Settings assistant].
Select
OK
MENU
OK
Skip
Follow the on-screen instructions to select your language and complete
your TV setup. Installation takes approximately 10 minutes.
You have set up your viewing preferences.
Press Í or Æ to select the desired mode for energy saving, then press
OK.
OK
Store
BACK
Back
MENU
Exit
Finish the Setup.
Select “Retail” or “Home” for your location.
Note
• If you are not receiving a signal from your cable service, contact the CATV provider.
• If you press . or MENU during autoprogram, this setting will be canceled.
• The initial autoprogram function can be executed for either [Antenna] or [Cable]
Retail
•
Home
Select
only once. When you change the connection (Antenna / Cable), set autoprogram again.
(Refer to page 24.)
If there is no signal input from the antenna terminal and no operation for several
seconds after you turn on the TV, [Helpful Hints] appears. Follow the instructions
listed on the TV screen.
OK
Select [Retail] if you want backlight to be brighter.
Select [Home] to reduce power consumption.
You must set [Home]. Otherwise, personalized picture and sound
settings will not be memorized after the unit goes to standby mode.
• Select [Retail], the unit will be set up with predefined setting for
retail displays.
• Select [Home], the unit will be set to maximize energy efficiency.
Picture and sound settings can be adjusted and saved as per your
personal preferences.
Press OK to begin [Settings assistant].
Settings assistant helps you customize picture settings. You will
see a series of test pictures where the right side and left side
differ. Select the side that is most pleasing to you with the Left/
Right keys.
OK
Next
BACK
Back
MENU
Exit
EN
11
English
Switching on and initial setup
5 Use your TV
Switching channels
This section helps you perform basic TV operations.
Switching on your TV and putting it
in standby mode
To switch on
• Press . POWER at the side of the TV or press . (Standby-On)
on the remote control.
To switch to standby
• Press . POWER at the side of the TV or press . (Standby-On)
on the remote control again.
Note
• Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
12
EN
Press CHANNEL + / − on the side of the TV. For digital channels, press
a number (1 to 135) followed by a dot “•” and then the corresponding
sub channel number (1 to 135). e.g. 108.30.
• Press CH + / − or enter a number on the remote control.
• Press PREV CH to return to the previously viewed channel.
Still mode
English
Adjusting volume
You can pause the image shown on the TV screen.
Press FREEZE to pause the image shown on the TV screen.
Freeze
•
•
The sound output will not be paused.
If no signal is detected or protected signal is received during still
mode, the image remains paused and the sound output will be
muted.
• The still function will be released after 5 minutes.
To cancel still mode, press any button except . (standby-On).
Watching channels from a set-top box
To watch channels from a set-top box
1
Switch on the set-top box.
» The picture from your set-top box might appear automatically
on the TV screen.
2
Use the remote control of your set-top box to select channels.
If the picture does not appear
To increase or decrease volume
• Press VOL + / − on the remote control or press VOLUME + / − on
the side of the TV.
To mute or unmute sound
• Press MUTE on the remote control to mute the sound.
• Press MUTE again or VOL + / − to recover the original sound.
1
2
Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
Use the remote control of your set-top box to select channels.
Watching connected devices
To watch connected devices
1
Switch on the connected device.
» The picture from your connected device might appear
automatically on the TV screen.
2
Use the remote control of the device to select channels.
If the picture does not appear
1
2
Press SOURCE repeatedly to select the connected device and wait
a few seconds for the picture to appear.
Use the remote control of the device to select channels.
Automatic Power Shut Off
If there is no input signal and no operation for 15 minutes, the unit will
turn off automatically.
EN
13
Watching a Blu-ray disc
Switching audio mode
To watch a Blu-ray Disc
This section describes how to switch audio language in digital mode and
how to switch audio in analog mode.
1
2
Insert a Blu-ray Disc into your player.
Press ► (play) on the remote control of the Blu-ray Disc player.
» The Blu-ray Disc might automatically play on the TV.
DTV
1
If the picture does not appear
Press SAP to display the currently selected language and the
number of available languages.
11.1
English 1/3
1/3
English
2
•
1
2
Press SOURCE repeatedly to select the Blu-ray Disc player and
wait a few seconds for the picture to appear.
Use the remote control of the Blu-ray Disc player to play the disc.
Press SAP repeatedly to cycle through the available audio
languages.
Available languages differ depending on the broadcast. [Other]
is displayed when the audio language cannot be acquired, or the
acquired languages are other than English, Spanish or French.
Note
• SAP does not control external audio devices.
• The information display will automatically disappear in a few seconds.
TV
Press SAP to display the currently selected audio mode. While
receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
11.1
11
SAP
/ STEREO
English
1/3
When all audio are available
SAP / STEREO
SAP
STEREO
SAP / MONO
SAP
MONO
SAP / STEREO
SAP
STEREO
When stereo and monaural audio are available
MONO / STEREO
MONO
STEREO
MONO / STEREO
STEREO
When SAP and monaural audio are available
SAP / MONO
MONO
STEREO
SAP // MONO
MONO
STEREO
When only monaural audio is available
MONO
(Cannot be switched)
STEREO : Outputs stereo-audio
SAP
: Outputs second audio program
MONO : Outputs mono-audio
14
EN
6 Use more of your TV
Summary of picture settings
Changing picture and sound settings
•
•
•
You must set [Home] in [Location] (refer to page 21).
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes to standby mode.
•
•
•
•
Changing picture settings
English
The following picture settings can be configured. Depending on the
format of the picture source, some picture settings are not available.
[Auto Picture]: Sets all picture settings to the factory default.
[Brightness]: Adjusts the intensity and details of dark areas.
[Contrast]: Adjusts the intensity of bright areas, keeping dark areas
unchanged.
[Color]: Adjusts color saturation.
[Tint]: Adjusts the color balance in an image.
[Sharpness]: Adjusts the level of sharpness in image details.
[Color Temperature]: To set the color temperature to [Normal],
[Warm] or [Cool].
Changing auto picture mode
1
2
1
2
Press MENU on the remote control.
Press OK to enter the [Picture].
Picture
Settings assistant
Sound
Auto Picture
Setup
Brightness
30
Features
Contrast
60
Language
Color
36
USB
Tint
Noise Reduction
3
4
Press Î or ï to select one of the following settings:
• [Personal]: The customized settings you defined by using the
[Picture] menu.
• [Standard]: For normal TV viewing.
• [Sports]: Vivid picture settings for high action.
• [Movie]: Brilliant picture settings for a cinematic experience.
• [Game]: Optimized for PCs, games consoles and playstations.
Personal
0
Sharpness
Color Temperature
Press AUTO PIC to set your TV to a predefined picture setting.
0
Normal
On
Press Î or ï to select one of the picture settings, and press OK
to enter the setting.
Adjust the picture quality.
[Auto Picture]
Press Î or ï to select the desired setting, then press OK.
([Personal], [Standard], [Sports], [Movie] and [Game])
[Brightness], [Contrast], [Color], [Tint], [Sharpness],
[Color Temperature]
Press Î or ï to select the desired setting, then Press Í or Æ to
adjust.
[Noise Reduction]
Reduces the noise of the picture.
Press Î or ï to select the desired option, then press OK.
On
Reduces noise in an image.
Off
Sets noise reduction to off.
Note
• This function is disabled when PC input is selected. (Setting will be in gray.)
5
Press MENU to exit.
Note
• To cancel picture adjustment, press MENU.
EN
15
Changing picture format
1
For 4:3 video signal
Press FORMAT on the remote control.
[Normal]
2
[16:9]
Press Î or ï to select a picture format and press OK to confirm
your choice.
Summary of picture formats
[Movie Expand]
Display modes can be selected when the broadcasting station is sending
16:9 or 4:3 video signal. And 3 types of display modes can be selected
for PC input signal.
For 16:9 video signal
[Wide]
[Normal]
[4:3]
[Zoom]
Normal
Display a 4:3 picture at its original size. Sidebars appear on both
edges of the screen.
16:9
Display a 4:3 picture at a 16:9 size; the picture is stretched
horizontally to fill the screen.
[Movie Expand]
[Wide]
[Zoom]
Normal
Display a 16:9 picture at its original size.
4:3
Display a 16:9 picture at a 4:3 size; the picture is shortened
horizontally. Sidebars appear on both edges of the screen.
Movie Expand
Display a 4:3 picture at a 16:9 size; the picture is stretched more
vertically at the top of the screen. This crops out the top of the
picture.
Zoom
Display a 4:3 picture at a 16:9 size; at its maximum size that is more
vertically stretched to fill the screen. This crops out the top and
bottom of the picture.
Wide
Display the picture with its center at the original size and the edges
stretched horizontally to fill the screen.
For PC input signal through
HDMI1
input mode
Movie Expand
Display a 16:9 picture that is vertically stretched to fill the screen.
This only crops out the top of the picture.
Zoom
Display a 16:9 picture at its maximum size without changing its
horizontal and vertical ratio.
[Normal]
[Full]
Wide
Display a horizontally stretched picture. This crops out the left and
right sides of the picture.
[Unscaled]
Normal
Display a proportionately stretched picture. Sidebars appear on
both edges of the screen.
Full
Display a picture that is stretched out of proportion to fill the
screen.
Unscaled
Display a picture in its original size.
16
EN
[TV Speakers]
This option will allow you to select the audio output from the
unit’s speakers. If you connect this TV to an external amplifier
which is compatible with HDMI CEC, you can use volume controls
on this TV to control volume on the external amplifier.
Press Î or ï to select the desired option, then press OK.
Use an HDMI-DVI cable or an HDMI-DVI adaptor to connect a PC to
your TV. For sound, add an audio cable with a stereo mini jack.
Caution
• Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Supported screen resolutions
The following screen resolutions are supported in PC mode:
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 768
1360 x 768
1920 x 1080
Refresh rate
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
The sound will be output from the unit’s speakers.
Off
The sound will not be output from the unit’s speakers.
Speakers
EasyLink
You can control audio output from your connected
EasyLink Compliant Devices with VOL + / − by using
this unit's remote control.
[Audio Setting]
You can set the output mode as a default for the sound mode
(NTSC only).
This setting is not interlocked when you change the output mode
by pressing SAP. (see ‘Switching audio mode’ on page 14).
Press Î or ï to select the desired option, then press OK.
Changing sound settings
1
On
Press MENU on the remote control and select [Sound].
4
Stereo
Outputs stereo-audio
Mono
Outputs mono-audio
SAP
Outputs second audio program
Press MENU to exit.
Summary of sound settings
2
3
Picture
Auto Sound
Standard
Sound
Equalizer
Setup
Virtual Surround Sound
Features
Auto Volume Leveling
Off
Language
TV Speakers
Speakers EasyLink
USB
Audio Setting
Stereo
On
Press Î or ï to highlight a sound setting and press OK to select
the setting.
Adjust the following items.
[Auto Sound]
Press Î or ï to select the desired setting, then press OK.
([Personal], [Standard], [Movie], [Music] and [News])
[Equalizer]
Adjust tone quality for each frequency.
Press Í or Æ to select the specific frequency, then press Î or ï to
adjust the level.
[Virtual Surround Sound]
Sound mode for more spatial or surround sound reproduction.
Press Î or ï to select the desired option, then press OK.
On
The Virtual Surround Sound will be effective.
Off
The original sound will be output.
[Auto Volume Leveling]
Reduces sudden changes in volume, for example, during
commercials or when switching channels.
Press Î or ï to select the desired option, then press OK.
On
Select if you want to reduce volume differences
between the TV commercials and the programs.
Off
Select if you want to turn off the Auto Volume Leveling.
The following sound settings can be configured. Depending on the
sound source, some sound settings are not available.
• [Auto Sound]: Sets all sound settings to the factory default.
• [Equalizer]: Adjusts individual sound frequencies.
• [Virtual Surround Sound]: Sound mode for more spatial or
surround sound reproduction.
• [Auto Volume Leveling]: Reduces sudden changes in volume, for
example, during commercials or when switching channels. Select
[On] or [Off].
• [TV Speakers]: Select [On] or [Off], or output sound to an
EasyLink compliant device. When [Speakers EasyLink]
k is selected,
the TV speakers are disabled and TV sound outputs to the speakers
of the compatible EasyLink compliant device. Adjust the volume
using the unit’s remote control.
Note
• If the TV is connected to a non-EasyLink compliant device and [Speakers EasyLink]
k is
selected, the TV speakers will not be disabled and continue to output sound.
Changing auto sound mode
1
2
Press AUTO SOUND to set your TV to a predefined sound setting.
Press Î or ï to select one of the following settings:
• [Personal]: The customized settings you defined by using the
[Sound] menu.
• [Standard]: For normal TV viewing.
• [Movie]: Realistic sound settings for a cinematic experience.
• [Music]: Emphasize high and low freq. for instrument sound.
• [News]: Clear sound settings for human voice.
EN
17
English
Using your TV as a PC monitor
Sleeptimer
You can always put your TV in standby mode earlier or reset the
sleeptimer during the countdown.
Picture
Press SLEEP to set the sleep timer.
Setup
Sleep
Video
Sound
Component
HDMI 1
Features
Off
HDMI 2
Language
Sleep timer display appears on the TV screen.
HDMI 3
USB
40.1 DTV
Press SLEEP repeatedly to change the amount of time (in increments of
30 minutes up to 120 minutes).
Select
Sleep
•
•
Each press of SLEEP will increase the time by 30 minutes.
After setup, the sleep timer display can be called up for checking by
pressing SLEEP.
3
Tip
To Cancel the Sleep Timer
• Press SLEEP repeatedly until “Sleep Off ” is displayed on the TV screen.
Child and rating locks
You can prevent your children from watching certain programs or
certain channels by locking the TV controls and by using ratings.
Setting your PIN
1
2
Press MENU on the remote control and select [Features] >
[Child Lock]
k.
Enter a 4-digit PIN on the Number buttons, of the remote control.
• If you have not set up your PIN, enter 0000.
4
2
3
4
Press Î or ï and then press OK repeatedly to switch between
blocked and not blocked.
• A box with indicates that the channel or input source is
blocked.
• An empty box indicates that the channel or input source is
not blocked.
Press MENU to exit.
1
Press MENU on the remote control and select [Features] >
[Child Lock]
k > [US TV ratings lock]
k.
2
Press Î or ï or Í or Æ and then press OK repeatedly to switch
between blocked and not blocked.
Each rating has a box-graphic in front of it to indicate whether
programs carrying that rating are locked:
• A box with indicates that all items in the content ratings list
are blocked.
• An empty box indicates that no items in the content ratings
list are blocked.
• An empty box indicates that some content ratings are
deselected. For example, for rating TV-14, you can deselect
one or more of the following content ratings:[D] (Dialog),
[L] (Language), [S] (Sex), or [V] (Violence).
Press MENU on the remote control and select [Features] >
[Child Lock]
k > [Change PIN].
Enter a 4-digit PIN on the Number buttons of the remote control.
• If you have a PIN, enter your current PIN.
• If you do not have a PIN, enter 0000.
• If you have forgotten your PIN, unplug the AC power cord for
10 seconds to restore the PIN to 0000.
Enter your PIN again to confirm.
Press MENU to exit.
Picture
S
L
D
TV-14
Features
Language
USB
V
TV-MA
Setup
Press MENU on the remote control and select [Features] >
[Child Lock]
k > [Channel Lock]
k.
TV-PG
TV-G
TV-Y7
TV-Y
Select
Enter your PIN (see ‘Setting your PIN’ on page 18).
EN
FV
Sound
•
3
18
Back
If you receive channels through a set-top box or cable box connected
by HDMI, you cannot use the TV ratings lock. Your set-top box or cable
box must be connected through RF or AV connectors.
This section describes how to lock input sources or specified channels.
The channels can be selected but the screen is blanked out and the
audio is muted.
2
BACK
Your TV is equipped with a V-chip that allows you to control access to
individual programs based on their age rating and content rating. The
program content advisory data are sent by the broadcaster or by the
program provider.
Locking a channel or input source
1
View/Block
Using the TV ratings lock
Changing your PIN
1
OK
120min
OK
View/Block
BACK
Back
When you block a rating, all ratings in the younger age
categories are automatically blocked.
Press MENU to exit.
Summary of US movie ratings
Age rating
Content rating
TV-Y : Appropriate for children of all ages with
themes and elements suitable for children
aged 2-6.
TV-Y7 : Programs designed for children age 7 and
older.
TV-G : Programs suitable for all ages. These programs
contain little or no violence, no strong
language and little or no sexual dialog or
situations.
TV-PG : Programs contain elements that some parents
may find unsuitable for younger children
and which may need parental guidance. The
program may contain moderate violence,
sexual dialog and / or situations and some
strong language.
TV-14 : Programs contain elements that may not
be suitable for children under 14 years of
age. These programs include one or more
of the following: intense violence, intense
sexual situations, suggestive dialog and strong
language.
TV-MA : Programs are designed to be viewed by adults
and may be unsuitable for children under
the age of 17. These programs may contain
graphical violence, explicit sexual activity
and / or crude or indecent language.
None
[FV]
(Fantasy Violence)
None
Rating
NR
G
PG
PG-13
R
[D] (Dialog)
[L] (Language)
[S] (Sex)
[V] (Violence)
NC-17
X
[D] (Dialog)
[L] (Language)
[S] (Sex)
[V] (Violence)
Summary of Canadian English rating
[L] (Language)
[S] (Sex)
[V] (Violence)
Rating
E
C
C8+
Using the movie ratings lock
You can control viewing of movies based on their MPAA (Motion
Picture Association of America) rating.
1
2
3
Press MENU on the remote control and select [Features] >
[Child Lock].
Select one of the menus for movie ratings lock.
• In the USA, select [US Movie ratings lock].
• In Canada, select [Canadian English Rating] or
[Canadian French Rating].
14+
Description
Exempt program.
Programming suitable for children under the age of
8 years. No profanity or sexual content of any level
allowed. Minimal comedic violence.
Suitable for children ages 8 and over. Low intensity
violence and fantasy horror allowed.
Movies with a mild content, suitable for all ages.
Movies for which parental guidance is recommended.
They may contain a few racy or violent scenes or
maybe some bad language.
Programming intended for children ages 14 and over.
May contain intense scenes of violence, strong profanity,
and depictions of sexual activity within the context of
a story.
Programming intended for viewers ages 18 and over.
May contain strong violence, language, and sexual
activity.
Enter your PIN (see ‘Setting your PIN’ on page 18).
Summary of Canadian French rating
Picture
X
Sound
NC-17
Setup
R
Features
PG-13
Language
PG
USB
G
Rating
E
G
8ans+
13ans+
16ans+
NR
Select
5
G
PG
18+
» The following screen shows the ratings in
[US Movie ratings lock].
4
Description
Not rated.
Movies with a mild content, suitable for all ages.
Movies for which parental guidance is recommended.
They may contain a few racy or violent scenes or
maybe some bad language.
Movies for which parental guidance may be
recommended if under age 13.
Restricted. The movies usually contain offensive sex or
bad language and may be unsuitable for children under
the age of 17. Parental guidance or permission needed.
Even with parental permission, forbidden under age 17.
More offensive sex, violence or bad language.
Movies which generally focus on sex, violence and / or
bad language. Also known as pornography.
OK
View / Block
BACK
Back
18ans+
Description
Exempt program.
Appropriate for all ages with little or no violence and
little to no sexual content.
Appropriate for children 8 and up which may contain
little violence, some foul language and / or little to no
sexual content.
Appropriate for children 13 and up, with moderate
violence, language, and some sexual situations. Persons
under 13 should be accompanied by an adult.
Appropriate for children 16 and up, with strong
violence, strong language, and strong sexual content.
Only to be viewed by adults and contains extreme
violence and graphic sexual content / pornography.
Press Î or ï and then press OK repeatedly to switch between
blocked and not blocked.
• A box with indicates that all items in the rating are blocked.
• An empty box indicates that no items in the rating are not
blocked.
Press MENU to exit.
EN
19
English
Summary of TV ratings
Closed caption
Closed captioning is an assistive technology that allows persons with
hearing disabilities to access television programming. Closed captioning
displays the audio portion of programming as text superimposed over
the video.
TV
Selecting caption services
1
Note
• Closed captioning service may not be controlled by this unit’s menu options if you are
•
watching television through an external cable or satellite set top box. In which case
you will need to use the menu options on the external set top box to control Closed
Captioning.
The captions do not always use correct spelling and grammar.
Not all TV programs and product commercials include closed caption information.
Refer to your area TV program listings for the TV channels and times of closed caption
shows. The captioned programs are usually noted in the TV listings with service marks
such as [CC].
Selecting DTV caption services
2
Select a caption service for digital channels:
• Press MENU on the remote control and select [Features] >
[Closed Caption] > [Digital Caption Service].
• Press Î or ï to select one of the listed caption services, and
press OK to confirm your choice.
Off
Select if you do not want Digital Caption Service. This
is the default.
CS-1 to CS-6
Select one of these before changing any other item
in [Closed Caption] menu. Choose [CS-1] under
normal circumstances.
Press MENU to exit.
Selecting how captions are displayed
You can choose the size, font, color, background and other
Y
characteristics of the caption text.
x
1
Press MENU on the remote control and select [Features] >
[Closed Caption] > [Caption Style] > [User Setting].
Press Î or ï to select [On], then press OK.
2
Press Î or ï to highlight an option for digital captions, and press
OK to select the option.
3
Press Î or ï to highlight a setting for the option, and press OK to
confirm your choice.
4
Press MENU to exit.
Difficulties viewing closed captions on DTV programming
If you have difficulties viewing closed captions on DTV programming,
including HDTV, received from your subscription television provider, you
should:
• consult any consumer information and manuals / guides on closed
captions for DTV programming provided by your subscription
television provider;
• ensure that the captioning function on your set-top box, if
applicable, is turned on; and,
• ensure that the captioning function on your DTV is turned on.
If you are still unable to view closed captions on DTV programming, you
should contact your subscription television provider for assistance.
20
EN
Press MENU to exit.
Note
• Not all caption services are used by a TV channel during the transmission of a closed
caption program.
Summary of caption services
DTV
1
2
Select a caption service for analog channels:
• Press MENU on the remote control and select
[Features] > [Closed Caption] > [Caption Service].
• Press Î or ï to select one of the listed caption services, and
press OK to confirm your choice.
Service
CC-1 and T-1;
Description
are the primary caption and text services.
The captioning or text is displayed in the same language
as the program’s dialogue
(up to 4 lines of script on the TV screen, where it does
not obstruct relevant parts of the picture).
CC-3 and T-3;
serve as the preferred data channels.
The captioning or text is often a secondary language.
CC-2, CC-4, T-2 are rarely available and broadcasters use them only in
and T-4;
special conditions, such as when
[CC-1] and [CC-3] or [T-1] and [T-3] are not available.
• There are 3 display modes according to programs:
Paint-on mode:
Displays input characters on the TV screen immediately.
Pop-on mode:
Once characters are stored in memory, they are
displayed all at once.
Roll-up mode:
Displays the characters continuously by scrolling (max.
4 lines).
ECO
This function allows you to operate the linked functions between our
brand devices with EasyLink capabilities and this unit connected via a
HDMI cable.
You can set whether the power consumption is saved or not.
1
1
Press MENU on the remote control and select [Features] >
[EasyLink]
k.
Press MENU on the remote control and select [Features] > [ECO].
Picture
Closed Caption
Sound
Child Lock
Setup
ECO
EasyLink
Current Software Info
Picture
Master EasyLink
On
Sound
Auto Device Off
On
Features
Language
Setup
Auto TV On
On
USB
Features
Device List
Location
On
Home
Language
USB
2
2
3
Press Î or ï to highlight the desired setting and press OK to
select the setting.
Adjust the following items.
[Master EasyLink]
k
Set the EasyLink [On] or [Off]
f.
The following additional settings will be grayed out when you set
to [Off]
f.
Press Î or ï to select the desired option, then press OK.
On
Select if you have connected an external device that
is compatible with the EasyLink function.
Off
Disable all EasyLink function.
[Auto Device Off]
f
Press Î or ï to select the desired option, then press OK.
On
Your connected EasyLink device goes into standby mode
automatically when you put this unit into standby mode.
Off
Your connected EasyLink device stays on even if unit
goes into standby mode.
3
Press Î or ï to select the desired mode, then press OK.
On
Select if you want to reduce power consumption.
Off
Sets the backlight brighter.
Press MENU to exit.
Set your location to home
You can set the location of your TV to [Home] or [Retail].
Choosing [Home] gives you full flexibility to change predefined settings
for picture and sound.
1
Press MENU on the remote control and select [Features] >
[Location].
2
3
Select [Home] and press OK to confirm your choice.
Press MENU to exit.
Note
• You must set [Home]. Otherwise, personalized picture and sound settings will not be
memorized after the unit goes to standby mode.
[Auto TV On]
Press Î or ï to select the desired option, then press OK.
On
This unit turns on automatically when you turn on your
connected EasyLink device.
Off
This unit remains in standby mode even if you turn on
your connected EasyLink device.
[Device List]
This function lets you see the product name of connected devices.
Press Î or ï to select the desired HDMI device listed on the TV
screen, then press OK.
4
Press MENU to exit.
EN
21
English
EasyLink
Viewing photos and watching videos on a
USB storage device
Your TV is fitted with a USB connection that enables you to view
photos or watch Motion JPEG files stored on a USB storage device.
Disconnect a USB storage device
Caution
• To avoid damaging the USB storage device always exit the on-screen menu and wait
five seconds before you remove the USB storage device.
Supported formats
Not-supported formats
JPEG
Progressive JPEG files
FAT / DOS-formatted memory File names containing a dot character
devices
1
2
It is recommended that files to be played back in this unit are
recorded under the following specifications:
<JPEG>
• Upper limit
: 24Mpixel
<Motion JPEG>
• Size
: 320 x 240 (QVGA)
• Frame rate
: 30fps
• Audio type
: LPCM - Sampling frequency
- (32 kHz, 44.1 kHz or 48 kHz)
- Quantization bit rate (16 bit)
View your pictures on a USB storage device
1
Press MENU to exit the on-screen menu.
Wait five seconds then remove the USB storage device.
After connecting your USB storage device to the TV, press OK to
enter the [USB] menu.
» [Picture] is highlighted.
USB0
Picture
Picture
Image1.JPG
Video
Image2.JPG
Folder 1
Note
Folder 2
• Philips can not be held responsible if your USB storage device is not supported, nor
will Philips accept any liability for damage or loss of stored data.
• The USB storage device is not supplied with the TV.
• Motion JPEG file with an extension of “.avi” can only be recognized. An extension of
“.mov” is not supported.
1
• This unit doesn’t support “pause”, “forward” or “reverse” during video (Motion JPEG)
playback.
2
3
Connect a USB storage device
1
2
Turn on the TV.
3
4
Press OK to enter the [Picture] folder.
Press Î or ï to select a picture or an album on the USB storage
device.
» The pictures appear in a list or as thumbnails.
Connect the USB storage device to the USB port on the side of
your TV.
» The main menu appears automatically.
3
2 Thumbnails
Press “OK” key to play/pause.
4
Press a number 2 (Number buttons) to toggle between [List] and
[Thumbnails].
USB0
Press Î or ï select [USB].
Picture
Image1.JPG
Image1.JPG
Image2.JPG
USB0
Picture
Sound
Setup
Image3.JPG
This menu allows you to enjoy
your pictures and videos via
your USB device.
Image1.JPG
Features
Language
USB
1
2 Thumbnails
3
4
Press “OK” key to play/pause.
USB0
Image1.JPG
Picture
Image1.JPG
1
2 List
Press “OK” key to play/pause.
22
EN
3
4
6
Press OK to view the picture or to start a slideshow of pictures in
the album.
• Press the Number buttons on the remote control to perform
the function shown at the bottom of the screen.
• If the function bar at the bottom disappears, press any
Number buttons to make it reappear.
During slideshow, you can skip forward or backward picture by
pressing CH + / −.
Watch your Video on a USB storage device
1
2
3
4
Connect your USB storage device to the TV.
Press OK to enter the [USB] menu.
Select [Video].
Press OK to enter the video folder.
USB0
Press Í and select another picture or another album.
MOVIE1.avi
Video
MOVIE1.avi
Title:
Configure how the slideshow is played
MOVIE2.avi
Director:
You can configure the following features of your slideshow.
MOVIE3.avi
Date:
MOVIE4.avi
Duration: 00:06:37
Feature
[More details]
MOVIE5.avi
[Transitions]
[Slide time]
[Rotate]
[Zoom]
[Start show] /
[Stop show]
Description
Displays the picture name, date, size and next
picture in the slide show.
Displays a list of available transition styles of
the pictures.
Sets the amount of time that a picture is
shown.
Rotates a picture.
Displays a list of available magnifications.
Starts or stops a slide show.
English
5
1
2
MOVIE1.avi
2009/04/02
3
4
Supported format: motion jpeg, 320 x 240, 30FPS
5
Press Î or ï to select a video.
• To stop playback and return to the file list, press BACK, OK
or CH +.
• Press CH − to play back from the beginning.
• Press 1 to display file details below.
[Title], [Director], [Date] and [Duration].
Press 1 again to remove file details.
6
Press Í to select another video.
Note
• Motion JPEG file with an extension of “.avi” can only be recognized. An extension of
“.mov” is not supported.
• This unit doesn’t support “pause”, “forward” or “reverse” during video (Motion JPEG)
playback.
EN
23
7 Install channels
Autoprogram
Before you install channels, ensure that you are registered with your
cable TV provider and that your equipment is correctly connected.
The first time you set up your TV, you are prompted to select a menu
language and to install TV and digital radio channels (if available). This
chapter provides instructions on how to reinstall and fine-tune channels.
1
Selecting your menu language
1
Press MENU on the remote control and select [Language].
Press MENU on the remote control and select [Setup] >
[Autoprogram].
Picture
Autoprogram
Sound
Channel List
Setup
Add Channels
Features
Antenna
Language
USB
Picture
Sound
Select your menu language.
English
English
Seleccione el idioma para el menú.
Español
Sélectionnez la langue du menu.
Français
Setup
Features
Language
USB
Select a language and press OK to confirm your choice.
3
Press MENU to exit.
2
3
Press OK to start the installation.
If you run [Autoprogram] when you have locked channels, a
message appears asking to enter your PIN . Enter your PIN in
order to complete the installation.
If you have forgotten your PIN, reset it as described in ‘Changing
your PIN’ on page 18.
Select [Antenna] or [Cable] and press OK.
• When [Antenna] is selected, the TV detects antenna signals. It
searches for NTSC and ATSC channels available in your area.
• When [Cable] is selected, the TV detects signals supplied
by cable. It searches for NTSC, ATSC, and Cable channels
available in your area.
Picture
Sound
Back
Autoprogram will rescan all channels.
Auto programming may take more than 20
minutes to complete.
Setup
Features
Select your signal source.
Language
Antenna
Antenna
Cable
USB
Cable
•
4
24
EN
Or
ANT.IN
When autoprogramming is complete, the lowest memorized
channel will be displayed.
Follow the on-screen instructions to complete the installation.
Add channels
The channels selected here can be skipped when selecting the channels
using CH + / −.
This function lets you add the channels that were not added by the
autoprogram due to the receptible condition at the initial setup.
Those channels can still be selected with the Number buttons.
1
1
English
Channel list
Press MENU on the remote control and [Setup] > [Add Channels].
Press MENU on the remote control and select [Setup] >
[Channel List].
Picture
Autoprogram
Sound
Channel List
Autoprogram
Setup
Add Channels
Channel List
Features
Antenna
Setup
Add Channels
Language
Features
Antenna
USB
Picture
Sound
Language
USB
2
2
Press Î or ï to select the channel you want to remove, then
press OK.
DTV
40.1
Picture
Sound
DTV
40.2
Sound
DTV
40.3
Setup
Features
Highlight channels for Ch Up/Down key
selection.
•
Features
Language
Language
USB
USB
Ch Select
•
11
Picture
Setup
•
OK
Watch/Skip
BACK
Add channels
For analog channels,
select a channel to be
added using number keys.
For digital channels,
you must perform
Autoprogram function.
Back
The channel display for the removed channel darkens. You will not
be able to select the channel again using CH + / −.
To reactivate a removed channel, press Î or ï and press OK. The
registered channels are highlighted.
When you remove a major channel, its minor channels are
removed as well.
Note
Ch Change
3
BACK
Back
Press MENU to exit.
Note
• If setup completes successfully, [Added to the channel list] is displayed.
• If external input is used, it is not possible to register the channel and [Unavailable] will
be displayed on the TV screen.
• By pressing Î or ï you can select the memorized channels only.
• In most cases, digital channels are not broadcast on the RF channel on which they
appear on your TV. To add digital channels you need to know the RF channel on which
the digital channel is being broadcast. E.g. If there is a digital channel 9.1 which is being
broadcast on RF channel 25, you need to enter 25 while performing a weak channel
installation. To find out the RF channel on which a particular digital channel is being
broadcast, please contact your local service provider.
Installing digital channels using [Add channels] might not work for direct cable
connections and if the digital signal is too weak for the TV to process.
• The channel with the [DTV] indicated on the display is ATSC. Otherwise the channel
is NTSC.
3
Press a number (1 to 135) to enter the number of the channel you
want to add, then press OK.
Press MENU to exit.
Optimizing the signal quality from your antenna
You can optimize your signal quality by tuning in ATSC channels with
weak signals, and adjusting the antenna.
1
2
3
4
Press MENU on the remote control and select [Setup] > [Antenna].
Press OK to confirm your choice.
Press a number (1 to 135) or press CH + or CH − to select the
channel for which you want to check the digital signal strength.
Press MENU to exit.
EN
25
8 Upgrade your TV software
Upgrading software
1
Philips continuously tries to improve its products and we strongly
recommend that you upgrade the TV software when upgrades are available.
New software can be downloaded from our website at
www.philips.com/support using the model number of your TV (e.g.
32PFL3506) to find information.
2
3
Prepare the software upgrade (see ‘Preparing for the software
upgrade’ on page 26).
If the TV is on, press . POWER at the side of the TV.
Connect your USB storage device to the service terminal on the
side of your TV.
Checking your current software version
1
Press MENU on the remote control and select [Features] >
[Current Software Info].
» The version and a description of the current software is
displayed, then press OK.
Picture
Sound
Setup
Back
4
Switch on the TV.
» The TV scans the USB storage device for the upgraded
software and automatically enters upgrade mode.
5
Release Version:
XXXXXXX_XXX_X_XXXX
Read the on-screen instructions and confirm that you want to
continue with the installation.
Features
Language
USB
Software upgrade in progress. Please wait.
Do not remove the USB storage device or turn the TV off
while upgrade is in progress.
2
Press MENU to exit.
Downloading...
60%
Preparing for the software upgrade
You require the following equipment:
• A PC with web browsing capability.
• An archive utility that supports the ZIP-format (e.g. WinZip for
Windows or StuffIt for Mac OS).
• An empty clean formatted USB stick.
Note
• Only FAT/DOS-formatted portable memory is supported.
• New software can be downloaded from www.philips.com/support
• Use only software upgrades that can be found on the Philips web site.
6
7
8
When the software upgrade is complete, remove the USB storage
device.
Press . POWER at the side of the TV to make sure the unit goes
to standby mode.
Switch on the TV.
» The TV starts up with the new software.
• The following messages are displayed without starting
software upgrade when it doesn’t fulfill the upgrade
conditions.
Warning
• When the software upgrade is running, don’t press any buttons.
• Do not remove the USB storage device during the software upgrade.
• If an error occurs during the upgrade, retry the procedure or contact your dealer.
Downloading the software
1
2
3
4
26
On your PC, open a web browser and go to
www.philips.com/support
Find information and software related to your TV and download
the latest software upgrade file to your PC.
Decompress the ZIP-file.
Copy the upgrade file to the root directory of the USB storage
device.
EN
The version of this update file is the same or older
than the current version.
Please check the file and try again.
English
9 Connect devices
This section describes how to connect various devices with different
connectors and supplements examples provided in the Quick Start
Guide.
Connection overview
a
b
g
f
g
h
c
h
i
i
j
d
*
j
k
e
f
a S-Video input jack
S-Video input connector to be used with Audio L/R connectors for
camcorder, game console, etc. When you use the S-Video for video
signals, do not use Composite video for video signals.
b Composite video and audio input jack
Video input for analog devices such as DVD, camcorder, game
console, etc. To be used with audio input.
c HDMI 2 input jack
Second HDMI in connector.
Digital audio and video input from high definition digital devices
such as Blu-ray players.
h Analog audio output jack
Audio cable connection for an external device.
i Digital audio output jack
Digital audio output to home theaters and other digital audio
systems.
j Audio input jack for HDMI 1 and PC
k Antenna input jack
Signal input from an antenna, cable or satellite.
Caution
d USB terminal
Data input from USB storage devices only. Do not connect any
device to this terminal such as; digital camera, keyboard, mouse, etc.
• Disconnect the AC power cord before connecting devices.
e HDMI 1 input jack
First HDMI in connector.
• Different types of connectors may be used to connect a device to your TV, depending
Note
on availability and your needs.
f HDMI 3 input jack
Third HDMI in connector.
g Component video and audio input jack
Video input from analog devices such as DVD, receiver, game
console, etc. This connector is used with audio input.
EN
27
Selecting your connection quality
S-Video - Good quality
HDMI - Highest quality
S-Video cable and audio L/R cable (red / white)
Supports high-definition signals and gives highest picture and sound
quality. Video and audio signals are combined in one cable. You must use
HDMI for full high-definition video and to enable Philips EasyLink.
Tip
For analog connections. Use an S-Video cable together with an audio
L/R cable.
Composite - Basic quality
• To connect to a PC without an HDMI connector, use a HDMI-DVI adaptor and a
separate audio cable.
Note
• Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP
is a form of Digital Rights Management that protects high definition content in DVD
or Blu-ray Discs.
Component (Y Pb Pr) - High quality
Component video cable (red / green / blue) and audio L/R cable (red / white).
Supports high-definition signals but gives lower picture quality than
HDMI. Component cables combine a red / green / blue video cable with
a red / white audio L/R cable. Match the cable colors when you connect
to the TV.
28
EN
Composite video / audio cable (yellow / red / white)
For analog connections. Composite cables usually combine a yellow
video cable with a red / white audio L/R cable. Match the audio cable
colors when you connect to the TV.
Connecting your devices
English
Connecting a set-top box, DVD player / recorder via
component video connectors (YPbPr) and analog audio
This section describes how to connect a selection of devices with
different connectors. Different types of connectors can be used to
connect a device to your TV. The following sections describe examples
only, other configurations are possible.
OUT
set-top box
or
Connecting a set-top box, Blu-ray Disc player and
HD game console via HDMI
OUT
OUT
YPbPr
IN
audio
dio L/R
L/R
IN
DVD player / recorder
set-top box
or
Blu-ray Disc player
HD game console
Note
OUT
• When you connect cables, match the cable colors to the connectors on the TV.
IN
Connecting a set-top box, DVD recorder via composite
connectors and analog audio
HDMI
audio L/R + video
Connecting a DVD player / recorder via HDMI-DVI and
analog audio
IN
OUT
DVD recorder
IN
audio L/R
OUT
IN
RF IN
cable
OUT
set-top box
RF OUT
RF IN
HDM
HDMI
DMI
MI 1 IN
No
only
only
on
DVI OUT
DVD player / recorder
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals.
Note
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
• When you connect cables, match the cable colors to the connectors on the TV.
EN
29
Connecting a set-top box via an S-Video connector and
analog audio
Connecting a PC
If you connect a PC with an S-Video connector at the side
S-Video
S-Video
IN
IN
OUT
audio L/R
IN
IN
cable
PC
OUT
OUT
RF IN
OUT
set-top box
Note
If you connect a PC with a HDMI-DVI connector.
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
• When you connect cables, match the cable colors to the connectors on the TV.
Connecting a digital home theater amplifier using a
digital audio coaxial cable
AUDIO OUT
AUDIO
IN
HDM
HDMI
DMI 1 IN
D
No
only
nl
PC
DVI OUT
D GITAL AUD
DIGITAL
AUD O
AUDIO
IN
OUT
digital home theater amplifier
If you connect a PC with an HDMI or Display Port (HDMI-Display Port
conversion cable) connector.
Note
HDMI
• Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over
Digital Audio Output for certain channels, shows or segments during the broadcast.
OUT
PC
IN
30
EN
Problem
No power or
indicator light.
Possible cause and solution
The TV is not connected to the power.
Press . POWER at the side of the TV or on the
remote control.
Ensure that the AC power cord is connected
tightly to the TV power connector and to the
power socket outlet.
Remove the AC power cord from the power
socket outlet, wait 60 seconds and reconnect the
AC power cord.
Connect the TV to a different power socket
outlet.
Error message on HDCP authentication fail.
the screen with
Ensure that your HDMI cable is certified.
HDMI connection. Press SOURCE on the remote control to switch
to another source and then switch back to the
HDMI source.
Reset the accessory device and the TV.
Turn on the TV.
Select the HDMI channel.
Turn on the accessory device.
While the TV and the accessory device are
powered on, unplug either end of the HDMI cable
and then reinsert the cable.
No picture or
An incorrect HDMI input jack is connected or an
sound is detected audio cable is not connected.
from the PC.
Connect a HDMI-DVI cable to the HDMI 1 input
jack on the TV.
Connect an audio cable to the HDMI 1-IN on
the TV.
Press SOURCE on the remote control, and select
the HDMI 1 source.
TV does not
Batteries are installed incorrectly, or low battery
respond to the
power.
remote control.
Ensure the indicator light on the TV blinks when
you press the remote control buttons.
Ensure that you are using the TV remote control.
Ensure that the batteries are inserted correctly
and do not need to be replaced.
Remove the AC power cord from the power
socket outlet, wait 60 seconds and reconnect the
AC power cord.
The picture is
Broadcast video format.
distorted, stretched Press FORMAT on the remote control to select
out, or has black
the best picture format.
bars on the side
For some accessory devices, the picture format
or top.
must be set in the accessory device.
The picture is
Insecure / incorrect connection.
mostly red and
Ensure all the connections are made according to
green, or the
the color code.
picture misses red Push the component cables all the way into the
when connected to YPbPr sockets on the TV.
an accessory device
via component
cables.
No picture or
No picture or sound - ensure you have selected
sound.
the correct channel.
Incomplete channel installation.
If the TV receives channels via an AV connection,
set the TV to the correct source input.
If the TV is connected directly to the wall via a
coaxial connection, perform the auto-installation
again.
No sound on the
TV loudspeaker.
Volume level is set to zero - increase the volume.
Sound is muted - press MUTE on the remote
control.
Audio cable is not connected - for AV connection,
ensure that the Audio L/R cable is connected
as described in Connecting your devices (see
‘Connecting your devices’ on page 29). If you use
a component cable, ensure that you have not
crossed the red audio cable with the red video
cable.
Audio output setting for the accessory device is
incorrect. For HDMI connections, some accessory
devices have an HDMI audio output setting
that must be turned on for HDMI to HDMI
connections.
Check if [Sound] > [TV Speakers] > [Off]
f is set
to [On]. No sound will be output when
[TV Speakers] is set to [Off]
f.
Bad picture quality Standard definition channels are not as clear as
high definition channels - connect the devices via
with a coaxial
connection.
component or HDMI cables.
Cannot control
Confirm that the connected devices are EasyLink
your TV and
compliant and are connected to your TV via
connected devices an HDMI cable. Not all brands of devices such
as Blu-ray Disc players use the same system as
with one remote
control.
Philips EasyLink. Other brands might not work
with Philips EasyLink.
Downloading an electronic copy
To obtain a more elaborate and complete electronic copy of this manual :
1
2
3
4
5
Point your browser to www.philips.com/support
Choose your country of location.
Enter the model number or a keyword in the “ Find your product ”
field. Alternatively, you can browse the catalog.
Click the description or model.
Under Product support, click “ User manuals ”.
Contact us
If you cannot resolve your problem, refer to the FAQ for this TV at
www.philips.com/support
If the problem remains unresolved, contact the Customer Support
Center in your country.
Warning
• Do not attempt to repair the TV yourself. This may cause severe injury, irreparable
damage to your TV or void your warranty.
Note
• Please have available your TV model and serial number before contacting us. These
numbers are available on the back and side of your TV, as well as on the packaging.
EN
31
English
10 Troubleshooting
11 Notes for the use of USB
devices
12 Specifications
Note
Digital Content Issues
• Only FAT (DOS) formatted (initialized) portable memory is
supported. Errors in this formatting can result in unreadable
content. If such problems appear try to re-format the card. Be
aware that formatting the card will also delete all the content on it
(pictures, videos, …).
• Only linear JPEG picture formats are supported. Progressive JPEG
and JPEG2000 encodings are not supported.
• The length of a filename or directory name is limited to the length
specified by the FAT16/32 file systems.
• Max. levels of nested directories is 19.
• Never use the supported file type extensions (.jpg, .jpeg) as
extensions for directories as these directories will be treated as
corrupted files.
• The access and response time of the content on a device can differ
depending on the type or brand of the device.
• The access and response time of the content on a device will
increase the more unsupported or corrupted files are on the
device.
Digital Camera Issues
• If a USB connection between your digital camera and the TV isn’t
working, you can try the solutions below to resolve your problem.
• Make sure your digital camera is switched on and verify if the
configuration of your digital camera is correct (see the manual of
your digital camera for more information).
• Some digital cameras allow you to switch off the USB interface.
Make sure that the USB interface is switched on before connecting
to the TV.
• If you have a digital camera with only internal memory (no
removable memory) you can try to copy the content manually to
a USB memory device (e.g. Philips KEY product) using a personal
computer.
• Some digital cameras allow you to switch between PTP (Picture
Transfer Protocol) or “PC Link” and USB Mass Storage or “PC
Drive”. Make sure that you select USB Mass Storage or “PC Drive”
on your digital camera.
• If your camera supports different interface settings be sure to try
them one by one or contact the reseller of your camera to find
out the correct setting.
USB Memory Device Issues
• Devices connected to the USB port of your TV must be “Mass
Storage Class” compliant. If your device (digital camera, portable
hard disk, …) is not “Mass Storage Class” compliant it will not be
detected by the content browser of the TV.
• The following subsets of the Mass Storage Class specification are
supported.
• The implementation of the TV is based on the “Universal Serial
Bus Mass Storage Class Specification Overview” (v1.2, June 23,
2003) including all documents referenced by the document. The
document can be found on the USB standardization website
(www.usb.org).
• Full support of the USB Mass Storage Class Bulk-Only Transport
(bInterfaceProtocol = 50h).
• Full support of SubClass Code = 05h; SFF-8070i spec.
• Full support of SubClass Code = 06h; SCSI transparent command
set.
• For large USB memory devices, when you are in the Content
Browser, it may take a long time before you can access your files.
• When using a USB portable hard disk, and due to the high power
consumption of the hard disk, it is advised to use the external
power supply of the portable hard disk to guarantee proper
working under all conditions.
32
EN
• Specifications are subject to change without prior notice.
Picture enhancement
Type:
WXGA (1366 x 768 pixels 60Hz)
Aspect ratio:
16:9
Viewing angles:
170° (V) by 170° (H)
Built-in digital tuner:
ATSC
Sound enhancement
Mono / Stereo:
Mono, Stereo, Virtual Surround Sound
Power output
(RMS watts):
20 W
Equalizer:
5 band
Ease of use
Video modes:
For 16:9 video signal / Normal, 4:3,
Movie Expand, Zoom, Wide
For 4:3 video signal / Normal, 16:9,
Movie Expand, Zoom, Wide
For PC input signal / Normal, Full, Unscaled
PC input:
via HDMI
Photo slide show:
Yes (jpeg files only)
Video playback:
Yes (Motion JPEG 320 x 240, 30fps only)
Connections
Component video
input with audio L/R:
1, supporting video signals / 480i/p, 720p, 1080i,
1080p 60Hz
Composite video
input with audio L/R
and S-Video:
1
HDMI:
3
HDMI supporting video signals / 480i/p, 720p,
1080i, 1080p 24Hz-60Hz
For HDMI 1 / PC-input signal up to WXGA
Audio L/R integrated
with HDMI 1:
1
Digital audio output :
1, supporting Dolby Digital
Analog audio output : 1
USB:
1 (on the side of TV)
Power
Power requirements:
120V~ AC +/− 10%, 60Hz +/− 0.5%
English
13 Warranty
LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory, or (3)
refund the original purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company manufactured products that can be identified by the trademark, trade
name, or logo affixed to it. This Limited Warranty does not apply
to any hardware product or any software, even if packaged or
sold with the product, as manufacturers, suppliers, or publishers
may provide a separate warranty for their own products packaged with the bundled product.
The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained
within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited
Warranty.
or a part that has been modified without written company permission, or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS
IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1-866-309-0841
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc. PO Box 430 Daleville, IN 47334-0430
061708
EN
33
14 Index
A
Antenna, connect
Audio
Audio setting
Auto device offf
Auto picture mode
Auto sound mode
Auto TV on
Auto volume leveling
P
PC
Picture format
Picture settings
9
17
17
21
15
17
21
17
Ratings
Remote control
insert batteries
overview
Retail mode
S
C
Cables
component
composite
connection quality
HDMI
manage cables
S-Video
YPbPr
Channels
install
list
lock
Child lock
channel lock
PIN
ratings lock
Closed caption
Connections
Controls
Customer support service
D
Device List
E
EasyLinkk
Eco
Environmental care
Equalizerr
28
28
28
28
10
28
28
24
25
18
18
18
18, 19
20
9, 27, 29
6
5
21
21
21
5
17
Settings assistant
Signal quality
Sleeptimerr
Software
update
version
Sound settings
Speakers EasyLinkk
Specifications
Standby
Subtitles
T
Troubleshooting
TV
as PC monitor
connections
controls
menu
position
remote control
screen care
software
switch channels
switch on
TV Speakers
U
USB
18, 19
8
6, 7
11, 21
11
28
18
26
26
17
17
32
6, 12
20
31
16, 17, 30
9, 27, 29
6
15
8
6, 7, 8
5
26
12
11, 12
17
22, 32
V
H
Home mode
I
Initial setup
11, 21
11
Volume
adjust
auto volume leveling
mute
W
Warranty
L
Location (retail or home)
11, 21
Y
YPbPrr
M
Master EasyLinkk
Mounting stand onto TV
34
R
30
16, 17
15
EN
21
8
13
17
13
33
28
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura,
Huixquilucan Edo. de México
C.P. 52787
TELEVISOR A COLOR DE CRISTAL LIQUIDO (LCD)
MODELO
LCD
IMAGEN VISIBLE
ENERGIA
32PFL3506 / F7
32”(81,28cm)
80,00cm
120V ~ 60Hz 130W
Comercializado por :
P&F MEXICANA, S.A. DE C.V.
IMPORTADOR :
SOJITZ MEXICANA, S.A. DE C.V.
Av. Paseo de las Palmas No. 239-302
Col. Lomas de Chapultepec, C.P. 11000
México, D.F. Tel. 52 (55) 5202 - 7222
EXPORTADOR :
FUNAI ELECTRIC CO. ,LTD.
ENSAMBLADO EN :
MEXICO
GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
TELEVISOR A COLOR DE CRISTAL LIQUIDO (LCD)
MODELO
LCD
IMAGEN VISIBLE
ENERGIA
32PFL3506 / F7
32”(81,28cm)
80,00cm
120V ~ 60Hz 130W
Comercializado por :
P&F MEXICANA, S.A. DE C.V.
IMPORTADOR :
SOJITZ MEXICANA, S.A. DE C.V.
Av. Paseo de las Palmas No. 239-302
Col. Lomas de Chapultepec, C.P. 11000
México, D.F. Tel. 52 (55) 5202 - 7222
PAIS DE ORIGEN :
CHINA
GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
Philips and Philips Shield are used under license of
Koninklijke Philips Electronics N.V.
A17FVMA / A17FHUH / A17FGUH
★★★★