Specifications ///
Product Information
EBG 184-EN
MITSUBISHI
ELECTRIC
FACTORY AUTOMATION
Type
FR-D720S-008-EC
FR-D720S-014-EC
FR-D720S-025-EC
FR-D720S-042-EC
FR-D720S-070-EC
FR-D720S-0100-EC
FR-D740-012-EC
FR-D740-022-EC
FR-D740-036-EC
FR-D740-050-EC
FR-D740-080-EC
FR-D740-120-EC
FR-D740-160-EC
200 V Type
400 V Type
ND (normal duty)
150 %
200 %
50 °C
Rated
current [A] *
0.8
1.4
2.5
4.2
7.0
10.0
1.2
2.2
3.6
5.0
8.0
12
16
Rated motor
capacity [kW] *
0.1
0.2
0.4
0.75
1.5
2.2
0.4
0.75
1.5
2.2
3.7
5.5
7.5
WxHxD
(mm)
68 x 128 x 80.5
68 x 128 x 80.5
68 x 128 x 142.5
68 x 128 x 162.5
108 x 128 x 155.5
140 x 150 x 155.5
108 x 128 x 129.5
108 x 128 x 129.5
108 x 128 x 135.5
108 x 128 x 155.5
108 x 128 x 165.5
220 x 150 x 155
220 x 150 x 155
FR-D700
H
Overload capacity
60 seconds overload
3 seconds overload
Ambient temperature
D
W
W
Frequency Inverters
The micro-drive solution
Small, cost-effective, reliable
* Standard operation / initial value
Operating conditions
Voltage
Ambient temperature
Storage temperature
Ambient humidity
Altitude
Specifications
1-phase, 200 – 240 V (–15 %, +10 %) or
3-phase, 380 – 480 V (–15 %, +10 %)
–10 ºC to +50 °C (non freezing)
–20 °C to +65 °C
Max. 90 % relative humidity (non condensing)
Max.1000 m above sea level
EUROPEAN BRANCHES
EUROPEAN REPRESENTATIVES
MITSUBISHI ELECTRIC EUROPE B.V.
FRANCE
25, Boulevard des Bouvets
F-92741 Nanterre Cedex
Phone +33 (0)1 / 55 68 55 68
MITSUBISHI ELECTRIC EUROPE B.V.
GERMANY
Gothaer Straße 8
D-40880 Ratingen
Phone +49 (0)21 02 / 4 86-0
MITSUBISHI ELECTRIC EUROPE B.V.
IRELAND
Westgate Business Park, Ballymount
IRL-Dublin 24
Phone +353 (0)1 / 419 88 00
MITSUBISHI ELECTRIC EUROPE B.V.
ITALY
Viale Colleoni 7
I-20041 Agrate Brianza (MI)
Phone +39 039 / 60 53 1
MITSUBISHI ELECTRIC EUROPE B.V.
SPAIN
Carretera de Rubi, 76-80
E-08190 Sant Cugat del Vallés
Phone +34 93 / 565 31 31
MITSUBISHI ELECTRIC EUROPE B.V.
UK
Travellers Lane
UK-Hatfield Herts. AL10 8 XB
Phone +44 (0)1707 / 27 61 00
GEVA
Austria
Wiener Straße 89
AT-2500 Baden
Phone: +43 (0)2252 / 85 55 20
TEHNIKON
BELARUS
Oktyabrskaya 16/5, Off. 703-711
BY-220030 Minsk
Phone: +375 (0)17 / 210 46 26
KONING & HARTMAN B.V. BELGIUM
Woluwelaan 31
BE-1800 Vilvoorde
Phone: +32 (0)2 / 257 02 40
AKHNATON
BULGARIA
4 Andrej Ljapchev Blvd. Pb 21
BG-1756 Sofia
Phone: +359 (0)2 / 97 44 05 8
INEA CR d.o.o.
CROATIA
Losinjska 4 a
HR-10000 Zagreb
Phone: +385 (0)1 / 36 940 - 01/ -02/ -03
AutoCont CS s.r.o. CZECH REPUBLIC
Jelinkova 59/3
CZ-721 00 Ostrava Svinov
Phone: +420 (0)59 / 5691 150
AutoCont CS s.r.o. CZECH REPUBLIC
Technologická 374/6
CZ-708 00 Ostrava - Pustkovec
Phone: +420 595 691 150
MITSUBISHI
ELECTRIC
FACTORY AUTOMATION
B:TECH, a.s.
CZECH REPUBLIC
Na Ostrove 84
CZ-58001 Havlickuv Brod
Phone: +420 (0)569 / 408 841
B:TECH, a.s.
CZECH REPUBLIC
Headoffice, U Borové 69
CZ-58001 Havlickuv Brod
Phone: +420 569 777 777
Beijer Electronics A/S
DENMARK
Lautruphoj 1-3
DK-2750 Ballerup
Phone: +45 (0)70 / 26 46 46
Beijer Electronics Eesti OÜ ESTONIA
Pärnu mnt.160i
EE-11317 Tallinn
Phone: +372 (0)6 / 51 81 40
Beijer Electronics OY
FINLAND
Jaakonkatu 2
FIN-01620 Vantaa
Phone: +358 (0)207 / 463 500
UTECO A.B.E.E.
GREECE
5, Mavrogenous Str.
GR-18542 Piraeus
Phone: +30 211 / 1206 900
MELTRADE Ltd.
HUNGARY
Fertõ utca 14.
HU-1107 Budapest
Phone: +36 (0)1 / 431-9726
Operating conditions
Protection
Shock resistance
Vibration resistance
Certifications
SHERF MOTION TECHN. Ltd. ISRAEL
Rehov Hamerkava 19
IL-58851 Holon
Phone: +972 (0)3 / 559 54 62
Kazpromautomatics Ltd. KAZAHSTAN
2, Scladskaya str.
KAZ-470046 Karaganda
Phone: +7 3212 / 50 11 50
Beijer Electronics SIA
LETTONIA
Vestienas iela 2
LV-1035 Riga
Phone: +371 (0)784 / 2280
Beijer Electronics UAB LITHUANIA
Savanoriu Pr. 187
LT-02300 Vilnius
Phone: +370 (0)5 / 232 3101
INTEHSIS srl
MOLDOVA
bld. Traian 23/1
MD-2060 Kishinev
Phone: +373 (0)22 / 66 4242
Beijer Electronics A/S
NORWAY
Postboks 487
NO-3002 Drammen
Phone: +47 (0)32 / 24 30 00
KONING&HARTMANB.V. NETHERLANDS
Haarlerbergweg 21-23
NL-1101 CH Amsterdam
Phone: +31 (0)20 / 587 76 00
Specifications
IP20
10 G
Max. 0.6 G
CE/UL/cUL/GOST/RoHS
MPL Technology Sp. z o.o. POLAND
Ul. Krakowska 50
PL-32-083 Balice
Phone: +48 (0)12 / 630 47 00
Sirius Trading & Services ROMANIA
Aleea Lacul Morii Nr. 3
RO-060841 Bucuresti, Sector 6
Phone: +40 (0)21 / 430 40 06
CONSYS
RUSSIA
Promyshlennaya st. 42
RU-198099 St. Petersburg
Phone: +7 812 / 325 36 53
ELECTROTECHNICAL SYSTEMS RUSSIA
Derbenevskaya st. 11A, Office 69
RU-115114 Moscow
Phone: +7 495 / 744 55 54
ELEKTROSTILY
RUSSIA
Rubzowskaja nab. 4-3, No. 8
RU-105082 Moscow
Phone: +7 495 / 545 3419
RPS-AUTOMATIKA
RUSSIA
Budennovsky 97, Office 311
RU-344007 Rostov on Don
Phone: +7 8632 / 22 63 72
STC DRIVE TECHNIQUE
RUSSIA
Poslannikov per. 9, str 1
RU-105005 Moscow
Phone: +7 495 / 790 72 10
Craft Co. & Engineering d.o.o. SERBIA
Bulevar Svetog Cara Konstantina 80-86
SER-18106 Nis
Phone: +381 (0)18 / 292-24-4/5 , 523 962
INEA SR d.o.o.
SERBIA
Karadjordjeva 12/260
SER-113000 Smederevo
Phone: +381 (0)26 / 617 163
CS MTrade Slovensko
SLOVAKIA
Vajanskeho 58
SK-92101 Piestany
Phone: +421 (0)33 / 7742 760
INEA d.o.o.
SLOVENIA
Stegne 11
SI-1000 Ljubljana
Phone: +386 (0)1 / 513 8100
Beijer Electronics AB
SWEDEN
Box 426
S-20124 Malmö
Phone: +46 (0)40 / 35 86 00
Econotec AG
SWITZERLAND
Hinterdorfstr. 12
CH-8309 Nürensdorf
Phone: +41 (0)44 / 838 48 11
GTS
TURKEY
Darulaceze Cad. No. 43 KAT. 2
TR-34384 Okmeydani-Istanbul
Phone: +90 (0)212 / 320 1640
CSC Automation Ltd.
UKRAINE
15, M. Raskova St., Fl. 10, Office 1010
UA-02002 Kiev
Phone: +380 (0)44 / 494 33 55
Simple, time-saving startup
CBI Ltd.
SOUTH AFRICA
Private Bag 2016
ZA-1600 Isando
Phone: + 27 (0)11 / 928 2000
Flexible and versatile in application
Space-saving installation thanks to compact design
Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany
Tel.: +49(0)2102-4860 /// Fax: +49(0)2102-4861120 /// info@mitsubishi-automation.com /// www.mitsubishi-automation.com
Specifications subject to change /// Art. no. 213988-A /// 04.2008
All trademarks and copyrights acknowledged.
Higher energy savings with the OEC function
The ultra compact
standard inverter
Flexible concept
쐽 Compact installation
Due to the ultra-compact dimensions the
FR-D700 can be mounted directly side by
side. A line within the FR-D700 series allows
effective, space-saving heat dissipation
through an approx. 1 cm thick cooling plate
(“flat plate”, up to 3.7 kW).
Simple operation
쐽 Simple cabling
The integrated spring clamps to connect
control and power lines quickly ensure reliable and simple cabling.
쐽 Easy parameterization
With the help of the parameterization software FR-Configurator a series of easy functions such as graphical machine analysis to
optimize the drive system are available.
쐽 Integrated control unit
The integrated Digital Dial gives the user
direct access to all important parameters
much more quickly than would be possible
with normal keys.
Door and gate drives are only some of the multiple applications of the new FR-D700 series.
The FR-D700 is especially advantageous for
standard applications by virtue of its userfriendliness. It is the correct choice in both
simple and more sophisticated applications.
Typical applications are feeder and conveyor drives, machining tools or gate and
door drives.
쐽 Short service times
The fans are designed as compact units that
can be replaced in less than 10 seconds for
cleaning or in the event of failure.
More standard
functions
To protect both staff and valuable machinery, the FR-D700 has innovative functions
that enable it to respond with great sensitivity to a variety of external factors.
쐽 Sensorless vector control
The sensorless vector control of the
FR-D700 also makes it possible to achieve
exceptional speed and torque performance
even without a motor with sensor. This
saves additional hardware costs.
쐽 Controlled deceleration during brief
power failures
The frequency inverter can respond to
power failures using regenerative energy to
perform controlled deceleration of the
motor. This prevents uncontrolled rundown and damage, for example, to textile
machines.
쐽 Automatic restart after power
failures
In pump and fan applications you can configure the inverter to resume power after
brief power failures. The system then
catches the coasting motor and automatically accelerates it back to the preset speed.
쐽 Integrated emergency stop
function*
The FR-D700 series has an emergency stop
input for safe shutdown. This ensures safe
operation in compliance with the European
Machinery Directive without installation of a
second protection mechanism. The FR-D700
thus conforms to the ISO13849-1 (EN954-1)
cat. 3 and IEC60204-1 cat. 0 standards.
Removable comb-like cable
bushing
* available from summer 2008
Cabling and fan replacement made easy
Simple and safe operability, compact design
as well as improved performance features
were the focus during the development of
the new FR-D700 frequency inverter. A drive
was created that set new standards in the
field of compact drives.
Conveyor belts and chain conveyors are an ideal application for the FR-D700.
Compliance to international standards such
as CE, UL, cUL, GOST, RoHS guarantees
worldwide use.
In addition to entering and displaying various parameters, the integrated four-digit
LED display also monitors and displays current operating values and alarm messages.
Entry into the drive
universe
Improved functions and device properties
such as simplified cabling thanks to spring
clamps, the integrated Digital Dial with LED
display, improved performance yield in the
low-speed range as well as the integrated
emergency stop function make the FR-D700
the new standard in the ultra compact class.
쐽 Simple network connection
The standard configuration of the FR-D700
has a serial interface (RS485) which allows
communication with a PC and a PLC.
Modbus RTU also is supported.
Upgraded functional
scope
The built-in multi-user panel with Digital Dial
쐽 Failure safety with self-diagnostics
This inverter actively monitors its own functional safety. If, for example, the fan rpm
decreases to 50 %, a pre-alarm is triggered.
An internal measuring program monitors
the ageing of the capacitors and an operating hours counter enables the operator to
plan the best time for servicing. Protection
and overload functions like the phase failure monitoring system for both the input
and output circuits ensure trouble-free
operation.
쐽 Independent motor setting
The independent motor setting is based on
the Autotuning function that can read out
all the parameters needed for the motor
model in less than a minute even when it is
not running.
쐽 High overload capacity of 200 %
The maximum short-term overload capacity of 200 % for 0.5 s minimizes downtimes
caused by overload alarms.
쐽 Integrated brake chopper
The built-in brake transistor of the FR-D700
supports direct connection of an external
braking resistor to improve stopping
power.
Additional energy
savings
The FR-D700’s OEC function helps to further
optimize current and hence power consumption of the motor. The result is an
additional decrease in energy requirement
compared to a conventional inverter.
Long service life
Only one protection mechanism is needed.
The FR-D700 is designed for a service life of
over 10 years. This is made possible, among
other things, by high-performance heatresistant capacitors, cooling fans with sealed
bearings and special lubricating grease. The
flow of cooling air comes into contact only
with the heat sinks and not electronic components. This ensures that no dust or dirt
can collect on the components. The circuit
boards are protected against aggressive
environments with single or double layer
conformal coating – another feature that
ensures longer service life.
The ultra compact
standard inverter
Flexible concept
쐽 Compact installation
Due to the ultra-compact dimensions the
FR-D700 can be mounted directly side by
side. A line within the FR-D700 series allows
effective, space-saving heat dissipation
through an approx. 1 cm thick cooling plate
(“flat plate”, up to 3.7 kW).
Simple operation
쐽 Simple cabling
The integrated spring clamps to connect
control and power lines quickly ensure reliable and simple cabling.
쐽 Easy parameterization
With the help of the parameterization software FR-Configurator a series of easy functions such as graphical machine analysis to
optimize the drive system are available.
쐽 Integrated control unit
The integrated Digital Dial gives the user
direct access to all important parameters
much more quickly than would be possible
with normal keys.
Door and gate drives are only some of the multiple applications of the new FR-D700 series.
The FR-D700 is especially advantageous for
standard applications by virtue of its userfriendliness. It is the correct choice in both
simple and more sophisticated applications.
Typical applications are feeder and conveyor drives, machining tools or gate and
door drives.
쐽 Short service times
The fans are designed as compact units that
can be replaced in less than 10 seconds for
cleaning or in the event of failure.
More standard
functions
To protect both staff and valuable machinery, the FR-D700 has innovative functions
that enable it to respond with great sensitivity to a variety of external factors.
쐽 Sensorless vector control
The sensorless vector control of the
FR-D700 also makes it possible to achieve
exceptional speed and torque performance
even without a motor with sensor. This
saves additional hardware costs.
쐽 Controlled deceleration during brief
power failures
The frequency inverter can respond to
power failures using regenerative energy to
perform controlled deceleration of the
motor. This prevents uncontrolled rundown and damage, for example, to textile
machines.
쐽 Automatic restart after power
failures
In pump and fan applications you can configure the inverter to resume power after
brief power failures. The system then
catches the coasting motor and automatically accelerates it back to the preset speed.
쐽 Integrated emergency stop
function*
The FR-D700 series has an emergency stop
input for safe shutdown. This ensures safe
operation in compliance with the European
Machinery Directive without installation of a
second protection mechanism. The FR-D700
thus conforms to the ISO13849-1 (EN954-1)
cat. 3 and IEC60204-1 cat. 0 standards.
Removable comb-like cable
bushing
* available from summer 2008
Cabling and fan replacement made easy
Simple and safe operability, compact design
as well as improved performance features
were the focus during the development of
the new FR-D700 frequency inverter. A drive
was created that set new standards in the
field of compact drives.
Conveyor belts and chain conveyors are an ideal application for the FR-D700.
Compliance to international standards such
as CE, UL, cUL, GOST, RoHS guarantees
worldwide use.
In addition to entering and displaying various parameters, the integrated four-digit
LED display also monitors and displays current operating values and alarm messages.
Entry into the drive
universe
Improved functions and device properties
such as simplified cabling thanks to spring
clamps, the integrated Digital Dial with LED
display, improved performance yield in the
low-speed range as well as the integrated
emergency stop function make the FR-D700
the new standard in the ultra compact class.
쐽 Simple network connection
The standard configuration of the FR-D700
has a serial interface (RS485) which allows
communication with a PC and a PLC.
Modbus RTU also is supported.
Upgraded functional
scope
The built-in multi-user panel with Digital Dial
쐽 Failure safety with self-diagnostics
This inverter actively monitors its own functional safety. If, for example, the fan rpm
decreases to 50 %, a pre-alarm is triggered.
An internal measuring program monitors
the ageing of the capacitors and an operating hours counter enables the operator to
plan the best time for servicing. Protection
and overload functions like the phase failure monitoring system for both the input
and output circuits ensure trouble-free
operation.
쐽 Independent motor setting
The independent motor setting is based on
the Autotuning function that can read out
all the parameters needed for the motor
model in less than a minute even when it is
not running.
쐽 High overload capacity of 200 %
The maximum short-term overload capacity of 200 % for 0.5 s minimizes downtimes
caused by overload alarms.
쐽 Integrated brake chopper
The built-in brake transistor of the FR-D700
supports direct connection of an external
braking resistor to improve stopping
power.
Additional energy
savings
The FR-D700’s OEC function helps to further
optimize current and hence power consumption of the motor. The result is an
additional decrease in energy requirement
compared to a conventional inverter.
Long service life
Only one protection mechanism is needed.
The FR-D700 is designed for a service life of
over 10 years. This is made possible, among
other things, by high-performance heatresistant capacitors, cooling fans with sealed
bearings and special lubricating grease. The
flow of cooling air comes into contact only
with the heat sinks and not electronic components. This ensures that no dust or dirt
can collect on the components. The circuit
boards are protected against aggressive
environments with single or double layer
conformal coating – another feature that
ensures longer service life.
Specifications ///
Product Information
EBG 184-EN
MITSUBISHI
ELECTRIC
FACTORY AUTOMATION
Type
FR-D720S-008-EC
FR-D720S-014-EC
FR-D720S-025-EC
FR-D720S-042-EC
FR-D720S-070-EC
FR-D720S-0100-EC
FR-D740-012-EC
FR-D740-022-EC
FR-D740-036-EC
FR-D740-050-EC
FR-D740-080-EC
FR-D740-120-EC
FR-D740-160-EC
200 V Type
400 V Type
ND (normal duty)
150 %
200 %
50 °C
Rated
current [A] *
0.8
1.4
2.5
4.2
7.0
10.0
1.2
2.2
3.6
5.0
8.0
12
16
Rated motor
capacity [kW] *
0.1
0.2
0.4
0.75
1.5
2.2
0.4
0.75
1.5
2.2
3.7
5.5
7.5
WxHxD
(mm)
68 x 128 x 80.5
68 x 128 x 80.5
68 x 128 x 142.5
68 x 128 x 162.5
108 x 128 x 155.5
140 x 150 x 155.5
108 x 128 x 129.5
108 x 128 x 129.5
108 x 128 x 135.5
108 x 128 x 155.5
108 x 128 x 165.5
220 x 150 x 155
220 x 150 x 155
FR-D700
H
Overload capacity
60 seconds overload
3 seconds overload
Ambient temperature
D
W
W
Frequency Inverters
The micro-drive solution
Small, cost-effective, reliable
* Standard operation / initial value
Operating conditions
Voltage
Ambient temperature
Storage temperature
Ambient humidity
Altitude
Specifications
1-phase, 200 – 240 V (–15 %, +10 %) or
3-phase, 380 – 480 V (–15 %, +10 %)
–10 ºC to +50 °C (non freezing)
–20 °C to +65 °C
Max. 90 % relative humidity (non condensing)
Max.1000 m above sea level
EUROPEAN BRANCHES
EUROPEAN REPRESENTATIVES
MITSUBISHI ELECTRIC EUROPE B.V.
FRANCE
25, Boulevard des Bouvets
F-92741 Nanterre Cedex
Phone +33 (0)1 / 55 68 55 68
MITSUBISHI ELECTRIC EUROPE B.V.
GERMANY
Gothaer Straße 8
D-40880 Ratingen
Phone +49 (0)21 02 / 4 86-0
MITSUBISHI ELECTRIC EUROPE B.V.
IRELAND
Westgate Business Park, Ballymount
IRL-Dublin 24
Phone +353 (0)1 / 419 88 00
MITSUBISHI ELECTRIC EUROPE B.V.
ITALY
Viale Colleoni 7
I-20041 Agrate Brianza (MI)
Phone +39 039 / 60 53 1
MITSUBISHI ELECTRIC EUROPE B.V.
SPAIN
Carretera de Rubi, 76-80
E-08190 Sant Cugat del Vallés
Phone +34 93 / 565 31 31
MITSUBISHI ELECTRIC EUROPE B.V.
UK
Travellers Lane
UK-Hatfield Herts. AL10 8 XB
Phone +44 (0)1707 / 27 61 00
GEVA
Austria
Wiener Straße 89
AT-2500 Baden
Phone: +43 (0)2252 / 85 55 20
TEHNIKON
BELARUS
Oktyabrskaya 16/5, Off. 703-711
BY-220030 Minsk
Phone: +375 (0)17 / 210 46 26
KONING & HARTMAN B.V. BELGIUM
Woluwelaan 31
BE-1800 Vilvoorde
Phone: +32 (0)2 / 257 02 40
AKHNATON
BULGARIA
4 Andrej Ljapchev Blvd. Pb 21
BG-1756 Sofia
Phone: +359 (0)2 / 97 44 05 8
INEA CR d.o.o.
CROATIA
Losinjska 4 a
HR-10000 Zagreb
Phone: +385 (0)1 / 36 940 - 01/ -02/ -03
AutoCont CS s.r.o. CZECH REPUBLIC
Jelinkova 59/3
CZ-721 00 Ostrava Svinov
Phone: +420 (0)59 / 5691 150
AutoCont CS s.r.o. CZECH REPUBLIC
Technologická 374/6
CZ-708 00 Ostrava - Pustkovec
Phone: +420 595 691 150
MITSUBISHI
ELECTRIC
FACTORY AUTOMATION
B:TECH, a.s.
CZECH REPUBLIC
Na Ostrove 84
CZ-58001 Havlickuv Brod
Phone: +420 (0)569 / 408 841
B:TECH, a.s.
CZECH REPUBLIC
Headoffice, U Borové 69
CZ-58001 Havlickuv Brod
Phone: +420 569 777 777
Beijer Electronics A/S
DENMARK
Lautruphoj 1-3
DK-2750 Ballerup
Phone: +45 (0)70 / 26 46 46
Beijer Electronics Eesti OÜ ESTONIA
Pärnu mnt.160i
EE-11317 Tallinn
Phone: +372 (0)6 / 51 81 40
Beijer Electronics OY
FINLAND
Jaakonkatu 2
FIN-01620 Vantaa
Phone: +358 (0)207 / 463 500
UTECO A.B.E.E.
GREECE
5, Mavrogenous Str.
GR-18542 Piraeus
Phone: +30 211 / 1206 900
MELTRADE Ltd.
HUNGARY
Fertõ utca 14.
HU-1107 Budapest
Phone: +36 (0)1 / 431-9726
Operating conditions
Protection
Shock resistance
Vibration resistance
Certifications
SHERF MOTION TECHN. Ltd. ISRAEL
Rehov Hamerkava 19
IL-58851 Holon
Phone: +972 (0)3 / 559 54 62
Kazpromautomatics Ltd. KAZAHSTAN
2, Scladskaya str.
KAZ-470046 Karaganda
Phone: +7 3212 / 50 11 50
Beijer Electronics SIA
LETTONIA
Vestienas iela 2
LV-1035 Riga
Phone: +371 (0)784 / 2280
Beijer Electronics UAB LITHUANIA
Savanoriu Pr. 187
LT-02300 Vilnius
Phone: +370 (0)5 / 232 3101
INTEHSIS srl
MOLDOVA
bld. Traian 23/1
MD-2060 Kishinev
Phone: +373 (0)22 / 66 4242
Beijer Electronics A/S
NORWAY
Postboks 487
NO-3002 Drammen
Phone: +47 (0)32 / 24 30 00
KONING&HARTMANB.V. NETHERLANDS
Haarlerbergweg 21-23
NL-1101 CH Amsterdam
Phone: +31 (0)20 / 587 76 00
Specifications
IP20
10 G
Max. 0.6 G
CE/UL/cUL/GOST/RoHS
MPL Technology Sp. z o.o. POLAND
Ul. Krakowska 50
PL-32-083 Balice
Phone: +48 (0)12 / 630 47 00
Sirius Trading & Services ROMANIA
Aleea Lacul Morii Nr. 3
RO-060841 Bucuresti, Sector 6
Phone: +40 (0)21 / 430 40 06
CONSYS
RUSSIA
Promyshlennaya st. 42
RU-198099 St. Petersburg
Phone: +7 812 / 325 36 53
ELECTROTECHNICAL SYSTEMS RUSSIA
Derbenevskaya st. 11A, Office 69
RU-115114 Moscow
Phone: +7 495 / 744 55 54
ELEKTROSTILY
RUSSIA
Rubzowskaja nab. 4-3, No. 8
RU-105082 Moscow
Phone: +7 495 / 545 3419
RPS-AUTOMATIKA
RUSSIA
Budennovsky 97, Office 311
RU-344007 Rostov on Don
Phone: +7 8632 / 22 63 72
STC DRIVE TECHNIQUE
RUSSIA
Poslannikov per. 9, str 1
RU-105005 Moscow
Phone: +7 495 / 790 72 10
Craft Co. & Engineering d.o.o. SERBIA
Bulevar Svetog Cara Konstantina 80-86
SER-18106 Nis
Phone: +381 (0)18 / 292-24-4/5 , 523 962
INEA SR d.o.o.
SERBIA
Karadjordjeva 12/260
SER-113000 Smederevo
Phone: +381 (0)26 / 617 163
CS MTrade Slovensko
SLOVAKIA
Vajanskeho 58
SK-92101 Piestany
Phone: +421 (0)33 / 7742 760
INEA d.o.o.
SLOVENIA
Stegne 11
SI-1000 Ljubljana
Phone: +386 (0)1 / 513 8100
Beijer Electronics AB
SWEDEN
Box 426
S-20124 Malmö
Phone: +46 (0)40 / 35 86 00
Econotec AG
SWITZERLAND
Hinterdorfstr. 12
CH-8309 Nürensdorf
Phone: +41 (0)44 / 838 48 11
GTS
TURKEY
Darulaceze Cad. No. 43 KAT. 2
TR-34384 Okmeydani-Istanbul
Phone: +90 (0)212 / 320 1640
CSC Automation Ltd.
UKRAINE
15, M. Raskova St., Fl. 10, Office 1010
UA-02002 Kiev
Phone: +380 (0)44 / 494 33 55
Simple, time-saving startup
CBI Ltd.
SOUTH AFRICA
Private Bag 2016
ZA-1600 Isando
Phone: + 27 (0)11 / 928 2000
Flexible and versatile in application
Space-saving installation thanks to compact design
Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany
Tel.: +49(0)2102-4860 /// Fax: +49(0)2102-4861120 /// info@mitsubishi-automation.com /// www.mitsubishi-automation.com
Specifications subject to change /// Art. no. 213988-A /// 04.2008
All trademarks and copyrights acknowledged.
Higher energy savings with the OEC function