MODEL
LC-60LE631X
LCD COLOUR TELEVISION
OPERATION MANUAL
cover_LC_60LE631X_B5.indd 1
10/24/2012 4:48:35 PM
cover_LC_60LE631X_B5.indd 2
10/24/2012 4:48:37 PM
Contents
Page
Page
Supplied accessories ................................................. 1
Dear SHARP customer............................................... 1
Important information ................................................ 1
Important Safety Precautions ................................... 2
Trademarks ................................................................. 2
Attaching the stand unit............................................. 3
Setting the TV ............................................................. 4
Connecting external devices ..................................... 5
Remote control unit.................................................... 6
Part names .................................................................. 7
Turning the TV on/off.................................................. 9
Supplying electric power to the antenna ................. 9
Initial auto installation ................................................ 9
Checking Signal information ..................................... 9
Auto installation ........................................................ 10
Programme setup ..................................................... 10
Selecting a preset AV mode .................................... 12
Menu operation ........................................................ 12
Picture menu ............................................................. 13
Audio menu ............................................................... 13
ECO menu ................................................................. 14
Setup menu ............................................................... 14
Option menu ............................................................. 16
Digital setup menu ................................................... 18
Programme Guide .................................................... 19
Info ............................................................................. 19
ATV (Analogue)/DTV/RADIO buttons ...................... 20
Switching the analogue audio format .................... 20
EPG ............................................................................ 22
Picture and still image ............................................. 23
Wide Mode ................................................................ 23
Teletext function ....................................................... 24
PC Control of the TV ................................................ 24
PC compatibility chart ............................................. 25
RS-232C commands list .......................................... 25
USB Media Player ..................................................... 26
Appendix ................................................................... 30
Specifications ........................................................... 31
Protection against overturning ............................... 32
Removing the stand ................................................. 32
Mounting the TV on a wall ....................................... 33
Dimensional drawings.............................................. 34
CLEARING THE PASSWORD ................................... 35
Supplied accessories
Remote control unit
“AA” size battery (g2)
Operation manual
Stand unit
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before using
this product.
Important information
This product qualifies for ENERGY STAR when “HOME” is selected for “TV location”.
Setting “TV Location” to “HOME” allows the TV to achieve an energy-saving status for household use.
1
LC_60LE631X_EN.indd 1
11/5/2012 10:57:04 AM
Important Safety Precautions
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product.
Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product.
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool
and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in
serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use
only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor
surface can cause the product to fall from the cart.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and
openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product
on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a sharp
object. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products
(including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special care
near children and pets.
• The LCD panel is a very high technology product with 2,073,600 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue,
green or red.
This is within product specifications and does not constitute a fault.
• Precautions when transporting the TV
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the TV
by two people holding it with two hands — one hand on each side of the TV.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC INPUT terminal on
the rear of the product.
• If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the
television to a suitable support.
• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
Trademarks
• TruSurround HD, SRS and the
symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
• SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich
bass, high frequency detail and clear dialog.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
• Products that have earned the ENERGY STAR® are designed to protect the environment through energy efficiency.
• DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
2
LC_60LE631X_EN.indd 2
11/5/2012 10:57:04 AM
4
Attaching the stand unit
• Before performing work, spread cushioning over the surface
on which you will be laying the TV. This will prevent it from
being damaged.
Attaching the stand cover.
1
2
Insert the stand cover.
Insert and tighten four short screws into the holes of
the stand cover.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
1
Confirm that there are screws with the stand unit.
(Eight long screws and four short screws)
2
Attach the supporting post for the stand unit onto
the base using the long screws with a screwdriver
as shown.
NOTE
• To detach the stand unit, perform the steps in reverse order.
• A screwdriver is not supplied with this product.
Supporting
post
Front
3
Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
Soft cushion
3
LC_60LE631X_EN.indd 3
11/5/2012 10:57:05 AM
Setting the TV
1 Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Antenna cable
(commercially available)
To antenna terminal
Room antenna terminal
(75-ohm type)
2 Connecting the AC cord
Plug the AC cord in to the AC outlet (product shape varies in some countries).
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC
CORD CONNECTED.
4
LC_60LE631X_EN.indd 4
11/6/2012 11:40:13 AM
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player,
Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from INPUT on the
remote control unit or INPUT on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV STB
(Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using the
INPUT 4/INPUT 5 or INPUT 6 terminals.
When using composite cable
(commercially available)
When using component cable
(commercially available)
Y
PB
(CB)
PR
(CR)
VIDEO
VCR/Game
console/
Camcorder
L
AUDIO
L
R
AUDIO
VCR/Game
console/
Camcorder
R
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the HDMI 1/ HDMI 2/ HDMI 3 or INPUT 6 terminals when connecting to a DVD player/Digital TV STB (Set
Top Box) and other audiovisual equipment.
When using HDMI-certified cable
(commercially available)
DVD player/
Digital TV STB
(Set Top Box)
When using component cable
(commercially available)
Y
PB
(CB)
PR
(CR)
DVD player/
Digital TV STB
(Set Top Box)
L
AUDIO
R
Connecting a PC
You can use the PC terminals when connecting to a PC.
Using Digital Audio Output
It is possible to output audio through the DIGITAL AUDIO
OUTPUT terminal. PCM audio outputs from the terminal.
ANALOG
RGB
Optical fibre cable
(commercially available)
PC
AUDIO
(L/R)
To optical digital input of
external audio devices
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers (The audio of the content you are viewing
is output from the terminal).
• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.
• The DIGITAL AUDIO OUTPUT terminal does not output any signal during HDMI digital input.
5
LC_60LE631X_EN.indd 5
11/5/2012 10:57:05 AM
Remote control unit
SLEEP
Set the Sleep timer.
0hr.30min.
1
2
3
4
5
6
12
Off
13
14
15
16
17
18
7
8
9
10
11
19
20
E
R
1
POWER (STANDBY/ON)
To switch the power on and off. (See pages 7 and 9)
2 0–9
Set the channel.
TELETEXT mode: Set the page. (See page 24)
3 A (Flashback)
Press A to return to the previous selected channel or external
input mode.
4 ATV
Press to access ATV mode. (See page 20)
5 DTV
Press to access DTV mode. (See page 20)
6 EPG
DTV mode: To display EPG (Electronic Programme Guide)
screen. (See pages 22 to 23)
7 a/b/c/d (Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
8 EXIT
Return to the default screen.
9 Colour (Red/Green/Yellow/Blue)
TELETEXT mode: Select a page. (See page 24)
0 FREEZE
Freeze a motion picture on the screen. (See page 23)
Q INFO
DTV mode: Display the programme information. (See page 19)
W DISPLAY
Display the channel or input information.
T
Y
U
I
O
P
1hr.00min.
2hr.30min.
1hr.30min.
2hr.00min.
AV MODE
Select an audio and video setting. (See page 12)
WIDE
Change the wide image mode. (See page 23)
MPX
Select the sound multiplex mode.
e (Mute)
Press e s Mutes sound.
Press e again s Restores sound.
Mute will be cancelled after 30 minutes. However, the TV will not
suddenly output loud sound as the volume level will be set to 0
automatically. Increase the volume level by pressing VOL k.
VOLk/VOLl
Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.
CHa/CHb
TV input mode: Select the channel.
(CHa) Increase the channel number.
(CHb) Decrease the channel number.
TELETEXT mode: Select the page. (See page 24)
INPUT (INPUT SOURCE)
Select an input source.
GUIDE
DTV mode: Display the programme list. (See page 19)
RADIO
Press to access RADIO mode. (See page 20)
MENU
Display the menu screen.
RETURN
MENU mode: Return to the previous menu screen.
m (TELETEXT)
Select the TELETEXT mode (all TV image, all TEXT image, TV/
TEXT image). (See page 24)
k (Reveal hidden for TELETEXT)
TELETEXT mode: Display hidden characters. (See page 24)
[ (SUBTITLE for TELETEXT)
To turn the subtitles on. (See page 24)
3 (Hold)
TELETEXT mode: Stop updating Teletext pages automatically.
Press 3 again to release the hold mode. (See page 24)
1 (Subpage)
Display the Teletext subpage directly when in Teletext mode.
(See page 24)
v (Top/Bottom/Full)
TELETEXT mode: Set the area of magnification.
(See page 24)
Inserting the battery
Before using the TV for the first time, insert a “AA” size battery (supplied). When the battery become depleted and the
remote control fails to operate, replace the battery with new “AA” size battery.
1 Open the battery cover.
2 Insert the supplied “AA” size battery.
3 Close the battery cover.
CAUTION
• Place batteries with their terminals corresponding to the
(e) and (f) indications in the battery compartment.
• Battery (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
• Do not mix batteries of different types.
• Do not mix old and new batteries.
6
LC_60LE631X_EN.indd 6
11/5/2012 10:57:06 AM
Part names
TV (Front)
POWER
MENU
INPUT
CH
VOL + /−
POWER
Remote
control
sensor
OPC sensor
POWER
indicator
SLEEP
OPC
SLEEP timer
indicator
OPC
indicator
POWER indicator
Light off
Power off.
Lighted (Red)
The TV is in standby mode.
Lighted (Green)
The TV is on.
7
LC_60LE631X_EN.indd 7
11/5/2012 10:57:06 AM
Part names (Continued)
TV (Rear)
9
10 11
12
1
13
2
1 HDMI 1 terminal*
2 HDMI 2 terminal
3 HDMI 3 terminal
4 RS-232C terminal
5 INPUT 4/INPUT 5 terminals
6 DIGITAL AUDIO OUTPUT terminal
7 INPUT 6 terminals
8 AUDIO OUT terminals
9 AUDIO IN (R/L) terminal
10 PC terminals*
11 Antenna input terminal
12 USB terminal
13 Headphone jack ( 3.5 mm)
• The speakers do not output
volume when headphones are
plugged in.
8
3
4
5
6
7
* The HDMI1 and PC terminals can both use the same audio input terminal. However, the proper item must be selected in the “PC
audio select” menu. (See page 16)
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Regarding the headphone jack
• Use headphones with a stereo mini plug ( 3.5 mm).
• Be sure to unplug headphones from the jack when they are not
in use.
• The speakers do not output volume when headphones are
plugged in.
• The “Audio” menu cannot be operated when headphones are
plugged in.
Volume display when headphones are plugged in
20
8
LC_60LE631X_EN.indd 8
11/5/2012 10:57:06 AM
Selected item
Turning the TV on/off
Turning on/off the power
Select “Yes” when your antenna is set-up
and connected independently.
No
Select “No” when you do not need to
supply voltage to your antenna, i.e. when
your antenna is connected to a community
antenna (The factory default setting of this
function is “No”).
• To turn on the power
Press POWER on the TV (After a few seconds, an image
appears with sound).
• To turn off the power
Switch it off by pressing POWER on the TV.
Standby mode
• To standby mode
If the TV is switched on, you can switch it to standby by
pressing POWER on the remote control.
• Switching on from standby
From standby, press POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time, be
sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
Initial auto installation
When the TV powers on for the first time after purchase,
the initial auto installation wizard appears. Follow the
menus and make the necessary settings one after
another.
1 Press POWER on the TV.
• The initial auto installation wizard appears.
2
Supplying electric power to the
antenna
When you set-up the DTV antenna for the first time, or
connect the antenna to a community antenna, you need
to proceed to set the antenna by following this manual.
1
2
3
4
5
6
Press DTV to access DTV mode.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Digital programme setup”,
and then press ENTER.
Press a/b to select “Antenna power”, and then
press ENTER.
Press c/d to select “Yes”, and then press
ENTER.
Description
Yes
Press c/d to select “HOME” or “STORE”, and
then press ENTER.
Press c/d to select your country channels listed
on the screen, and then press ENTER.
Press a/b/c/d to select “DTV”, “ATV” or “ATV
+ DTV”, and then press ENTER.
Press a/b to select the desired sound system,
and then press ENTER.
• Sound system is selectable when the signal search is set
to “ATV” or “ATV + DTV” mode only.
• Auto installation will be executed.
• You do not need to do anything during the auto search.
• HOME: “STANDARD” will be the default value for the “AV
mode” setting.
• STORE: “DYNAMIC (FIXED)” will be the default value for
the “AV mode” setting. If the “AV mode” is changed, the
TV will automatically switch back to “DYNAMIC (FIXED)”
when there is no further change to TV setting for 30
minutes.
• To change the STORE mode to HOME mode, please
refer to page 16 to reset the unit.
Checking Signal information
If you install a DVB-T antenna for the first time or relocate
it, you should adjust the alignment of the antenna to
receive a good reception while checking the antenna
setup screen.
1
2
3
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Digital programme setup”,
and then press ENTER.
9
LC_60LE631X_EN.indd 9
11/5/2012 10:57:07 AM
Checking Signal information
(Continued)
Digital settings
 Checking Signal information
Press a/b to select “Signal information”.
Auto search
Manual search
Manual adjust
Signal information
Programme setup
Channel number 68
Signal strength
Antenna power
Current 100
Signal quality
Maximum 100
Current 98
Maximum 98
You can reconfigure DTV services settings automatically
or manually.
1 Press MENU and the MENU screen displays.
2 Press c/d to select “Setup”.
3 Press a/b to select “Digital programme setup”,
and then press ENTER. If you have already set the
password, enter it here.
• See page 14 for setting a password.
4
Position and align the antenna so that the
maximum possible values for “Signal strength”
and “Signal quality” are obtained.
NOTE
• The values of “Signal strength” and “Signal quality” indicate
when to check the appropriate alignment of the antenna.
Auto installation
You can run auto installation again, even after setting up
the preset channels.
1 Press MENU and the MENU screen displays.
2 Press c/d to select “Setup”.
3 Press a/b to select “Auto installation”, and then
press ENTER.
4 If you have already set the password, enter it here.
4
5
Press a/b to select the desired menu item, and
then press ENTER.
Press c/d to select “Yes”, and then press
ENTER.
 Auto search (Digital)
Use this menu to add new services automatically after
auto installation has been completed.
 Manual search (Digital)
Add new services within a specified frequency band.
• Press c/d to select the frequency and then press ENTER.
 Manual adjust (Digital)
Configure various settings for each service using the
Colour (R, G, B) buttons.
Digital programme setup]
• See page 14 for setting a password.
5
6
Press c/d to select “Yes”, and then press
ENTER.
Press a/b/c/d to select “DTV”, “ATV” or “ATV
+ DTV”, and then press ENTER.
Press a/b to select the desired sound system,
and then press ENTER.
• Sound system is selectable when the signal search is set
to “ATV” or “ATV + DTV” mode only.
You do not need to do anything during the auto
search. Press MENU to exit.
1
2
Press a/b to select desired service.
Press the Colour button on the remote control
corresponding with the item you want to
reconfigure.
• Each time the Colour button is pressed, you can switch
the corresponding operation on/off.
Buttons for Manual adjust operation
Menu
items
Remote
control
buttons
Description
Lock
R
When the service is locked, you must
enter your password whenever you
tune to the service.
CH Skip
G
Services with “Skip” are passed over
when pressing r/s in the
TV/remote control unit.
Sort
B
The item position of services can be
sorted.
10
LC_60LE631X_EN.indd 10
11/5/2012 10:57:07 AM
Programme setup (Continued)
Search
The next channel will be search in order.
The item position of services can be sorted
Fine
1 Press a/b to select the service whose item
position you want to move, and then press B.
You can adjust the frequency to your desired position.
NOTE
DTV
005
Maori Television
DTV
022
Parliament TV
DTV
100
Freeview I HD
2 Press a/b to move it to the desired position, and
then press ENTER.
DTV
100
Freeview I HD
DTV
022
Parliament TV
DTV
005
Maori Television
3 Repeat steps 1 and 2 until all desired service
items are sorted.
Analogue settings
 Auto search (Analogue)
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
• Adjust while checking the background picture as a reference.
• Instead of pressing c/d to adjust the frequency, you can set
by directly entering the frequency number of the channel with
0 — 9.
EXAMPLE
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
Colour system
Select the optimum colour system to receive. (Auto, PAL,
SECAM, NTSC 4.43, PAL-60)
Sound system (Broadcasting system)
Select the optimum sound system (Broadcasting system)
to receive. (B/G, D/K, I)
Label
To enter the name of the channel. Maximum 5
alphanumeric can be input.
• Press a/b/c/d: To select a desired alphanumeric, and
then press ENTER.
Repeat until the name is fully spelt out.
Search
1
2
3
4
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Analogue programme
setup”, and then press ENTER.
If you have already set the password, enter it here.
Colour system [ Auto ]
Sound system [ B/G ]
Label
• See page 14 for setting a password.
5
6
Press a/b to select “Auto search”, and then
press ENTER.
Press c/d to select “Yes”, and then press
ENTER.
Press a/b to select the desired sound system,
and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
 Manual adjust (Analogue)
You can set some channel item manually.
1 Repeat steps 1 to 4 in Auto search.
2 Press a/b to select “Manual adjust”, and then
press ENTER.
3 Press c/d to select “Yes”, and then press
ENTER.
4 Press a/b/c/d to select the channel you want
to edit, and then press ENTER.
• The selected channel information displays.
5
6
Press a/b to select the desired menu, and then
press ENTER.
Press a/b or c/d to select the desired item or
adjust the item to the desired level. Press ENTER
if necessary.
Broadcasting station name settings
Fine
[
]
Booster
[ Off ]
Skip
[ Off ]
Lock
[ Off ]
A B C D E F G H I J CLEAR
KLMNOPQRST BACK
UVWXYZ+–._
0 1 2 3 4 5 6 7 8 9 END
• To exit, select END and then press ENTER.
• If the wrong alphanumeric is entered, select CLEAR to clear,
and then press ENTER.
Booster
Enhance the picture quality during weak signal. It is not
recommended to turn on during strong signal condition.
It may induced unwanted noise. (On, Off)
Skip
Channels with “Skip” set to “On” are passed over when
using CHr/s even if selected while watching the
image from the TV. (On, Off)
Lock
You can block the viewing of any channel. (On, Off)
NOTE
• See “Child lock” for setting a password.
• If “Lock” is set to “On” for a channel, “Child lock has been
activated” is displayed when you select the channel, and the
image and sound of the channel is blocked.
• When pressing ENTER while “Child lock has been activated”
is displayed, password input menu will be displayed. Inputting
the correct password lifts the child lock temporarily until the
power is turned off.
11
LC_60LE631X_EN.indd 11
11/5/2012 10:57:07 AM
Programme setup (Continued)
 Sort (Analogue)
Channel position can be sorted freely.
1
2
3
4
5
Repeat steps 1 to 4 in Auto search.
Press a/b to select “Sort”, and then press
ENTER.
Press c/d to select “Yes”, and then press
ENTER.
Press a/b/c/d to select the channel you want
to move, and then press ENTER.
Move it to the desired position by pressing
a/b/c/d, and then press ENTER.
Repeat the steps 4 and 5 until all desired channels
are sorted.
Selecting a preset AV mode
“AV mode” gives you several viewing options to choose
from to best match the system environment, which
can vary due to factors like room-brightness, type of
programme watched or the type of image input from
external equipment.
1 Press AV MODE.
2 Each time you press AV MODE, the mode
changes.
• You can also switch the mode in the “AV mode” menu
on the “Picture” menu screen.
Selected item
Description
STANDARD
For a highly defined image in a normally
bright room.
MOVIE
For a movie.
 Erase programme (Analogue)
GAME
For game play.
The individual programme can be erased.
PC
For PC (Available only when inputting an
HDMI or PC signal).
1
2
USER
Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC
(FIXED)
Changes the image and sound settings
to the factory preset values. No
adjustments are allowed.
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing.
6
3
4
5
6
Repeat steps 1 to 4 in Auto search.
Press a/b to select “Erase programme”, and
then press ENTER.
Press c/d to select “Yes”, and then press
ENTER.
Press a/b/c/d to select the channel you want
to erase, and then press ENTER.
Press ENTER to erase the channel.
Repeat the steps 4 and 5 until all desired channels
are erased.
NOTE
• You can select a different AV mode item for each input mode
(For example, select STANDARD for TV input and DYNAMIC
for VIDEO input).
• During PC input mode, only “STANDARD”, “PC” and “USER”
can be selected under the AV mode selection.
Menu operation
1
2
3
4
Press MENU and the MENU screen displays.
Press c/d to select the desired menu (Picture,
Audio, ECO, Setup, Option, Digital setup).
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
Press a/b or c/d to select the desired item or
adjust the item to the desired level. Press ENTER
if necessary.
12
LC_60LE631X_EN.indd 12
11/5/2012 10:57:08 AM
Active contrast
Picture menu
Picture
ECO
Audio
[STANDARD]
AV mode
[ Off ]
OPC
Backlight
[ +16 ] –16
+16
Contrast
[ +30 ]
0
+40
Brightness
[
0 ] –30
+30
Colour
[ + 4 ] –30
+30
Tint
[
0 ] –30
+30
Sharpness
[ + 2 ] –10
+10
Advanced
Automatically adjusts the contrast of an image according
to the scene. (On, Off)
3D-Y/C
Provides high quality images with minimal dot crawl and
cross colour noise. (On, Off)
NOTE
• 3D-Y/C is not selectable depending on the input signal type.
• 3D-Y/C may not operate depending on the input signal type
or noisy input signal.
Monochrome
Reset
 OPC (Optical Picture Control) setting
For viewing images in monochrome. (On, Off)
You can set the TV to automatically adjust the screen to
suitable backlight brightness according to the lighting
conditions.
DNR (Digital Noise Reduction)
Selected item
Description
On:Display
Displays the OPC effect on the screen while
adjusting the brightness of the screen.
On
Automatically adjusts.
Off
The brightness is fixed at the value set in
“Backlight”.
Reduces noise on screen and produces a clearer video
image. (Off, High, Low, Auto)
NOTE
• For resetting all Picture adjustment items to factory preset
values, press a/b to select “Reset”, press ENTER, press c/d
to select “Yes”, and then press ENTER.
Audio menu
Setup
ECO
Audio
NOTE
STANDARD
• Make sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.
Treble
[
0] –15
Bass
[
0] –15
+15
 Picture adjustments
Balance
[
0]
R
Selected item
c button
d button
+15
L
SRS TS HD
[ Off]
Bass enhancer
[On]
Reset
Backlight
The screen dims
The screen
brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness
For more brightness
Colour
For less colour
intensity
For more colour
intensity
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Tint
Skin tones become
reddish
Skin tones become
greenish
Balance
Decrease audio from
the right speaker
Decrease audio
from the left speaker
Sharpness
For less sharpness
For more sharpness
 Advanced
Colour temp. (Colour Temperature)
Adjusts the colour temperature to give the best white
image.
Selected item
High
Mid-High
Middle
Mid-Low
Low
 Audio adjustments
Selected item
c button
d button
 SRS TruSurround (TS) HD™
You can enjoy SRS TruSurround HD™ sound, the same
as you were in movie theatre.
Using SRS TS HD on the menu screen
You can produce SRS TruSurround HD™ effects from
the “Audio” setting.
Description
Selected item
White with bluish tone
SRS TruSurround HD™ creates a high
quality surround sound experience,
when watching DVD movies and TV
programmes broadcast in surround sound.
Off
Outputs the normal sound.
White with reddish tone
Quick shoot
Use Quick shoot to view fast-action images more clearly.
(On, Off)
NOTE
Description
On
 Bass enhancer powered by SRS Labs, Inc.
This function allows you to enjoy bass-enhanced sound.
Selected item
Description
• Quick shoot may cause image noise. If this occurs, set the
function to “Off”.
On
Bass enhancer function is on.
Film mode
Off
Outputs the normal sound.
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
film frame for high-definition picture quality. (On, Off)
NOTE
• For resetting all Audio adjustment items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
c/d to select “Yes”, and then press ENTER.
13
LC_60LE631X_EN.indd 13
11/5/2012 10:57:08 AM
ECO menu
Setup menu
MENU [ECO]
MENU [Setup]
Setup
ECO
Option
Setup
[ Enable]
No signal off
4 Power management
No operation off
Digital setup
Option
Auto installation
4 Analogue programme setup
[ 3hr.]
Digital programme setup
Ecology
Child lock
Input skip
4 Input label
Position
4 HDMI auto view
[ On]
WSS
 No signal off
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
 Power management (PC input mode only)
You can set the TV to automatically power off when no
image is displayed on PC.
Selected item
Description
Off
• No power management
• Factory preset value.
Mode1
• If no signal inputs for approximately
8 minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• You can turns on manually by pressing
POWER.
• If no signal inputs for approximately
8 seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on
automatically.
• You can turns on manually by pressing
POWER.
 No operation off
You can set the TV to automatically power off when no
TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
[Off]
Quick start
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving no
programme signals. (Enable, Disable)
Mode2
[Panorama]
4:3 mode
[ West Europe]
Text language
Identification
Reset
 Child lock (ATV and DTV input mode only)
Allows you to use a password to protect certain settings
from being accidentally changed.
Setting a password
1
2
3
4
5
Repeat steps 1 to 2 in Menu operation.
Press a/b to select “Child lock”, and then press
ENTER.
If you already set the password, enter it here.
Press a/b to select “Change password”, and
then press ENTER.
Enter the 4-digit number as a password using
0 — 9.
Change password
Enter your new password. Use 4 digits
Clear password
Parental rating
New password – – – –
Reconfirm – – – –
6
Enter the same 4-digit number as in step 5 to
confirm.
NOTE
• Five minutes before the power shuts down, the remaining
time displays every minute.
• To view a locked channel (Lock setting in Analogue
programme setup “Manual adjust” is set to “On”), you must
enter a password. When you select a locked channel, “Child
lock has been activated” is displayed.
• Press ENTER to display the password input window.
 Ecology
Clearing the password
When set to “Yes”, the TV activates the following power
saving mode.
Allow you to clear your password.
1 Repeat steps 1 to 3 in Setting a password.
2 Press a/b to select “Clear password”, and then
press ENTER.
3 Press c/d to select “Yes”, and then press
ENTER.
•
•
•
•
•
“OPC” set to “On”. (Page 13)
“No signal off” set to “Enable”. (Page 14)
“Power management” set to “Mode1”. (Page 14)
“No operation off” set to “3 hr.”. (Page 14)
“Quick start” set to “Off”. (Page 16)
NOTE
• Ecology mode cannot be deactivated by selecting “No”. Each
setting must be changed individually to deactivate Ecology
mode.
14
LC_60LE631X_EN.indd 14
11/5/2012 10:57:08 AM
 Input label
Setup menu (Continued)
You can assign each input source a label as you prefer.
Parental rating
This function allows TV channels to be restricted.
It prevents children from watching violent or sexual
scenes that may be considered inappropriate.
1
2
3
Repeat steps 1 to 3 in Setting a password.
Press a/b to select “Parental rating”, and then
press ENTER.
Press a/b to select your desired rating, and then
press ENTER.
1
2
3
4
5
Press INPUT to select the desired input source.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Input label”, and then press
ENTER.
Press a/b/c/d to select a desired
alphanumeric, and then press ENTER.
Repeat until the name is fully spelt out. Maximum
6 alphanumeric can be input.
When the country setting is set to “Australia”.
Selected item
External equipment name settings
Description
General and
above (G)
Content is not offensive to most viewers.
Parental
guidance and
above (PG)
Content is such that parents may
not want their children to view the
programme.
Mature and
above (M)
Mature audience only. This programme
is specifically designed to be viewed by
adults and therefore may be unsuitable
for children under 15.
Mature adult
and above (MA)
Mature adult only. Mature audience only.
This programme is specifically designed
to be viewed by adults and therefore
may be unsuitable for children under 15.
A B C D E F G H I J CLEAR
KLMNOPQRST BACK
UVWXYZ+–._
0 1 2 3 4 5 6 7 8 9 END
To exit, select END and then press ENTER.
If the wrong alphanumeric is entered, select
CLEAR to clear, and then press ENTER.
NOTE
• You cannot change labels if the input source is ATV and DTV.
 Position
For adjusting a picture’s horizontal and vertical position.
Selected item
Description
Adult violence
and above (AV)
Not for children under age 15. Strong
elements of sex and/or violence.
H-Position
Restricted and
above (R)
Not for children under age 18. Strong
elements of sex and/or violence.
Centres the image by moving it to the left
or right.
V-Position
No block (–)
Cancel the blocking.
Centres the image by moving it up or
down.
Reset
Reset position to factory preset values.
When the country setting is set to “New Zealand”.
 HDMI auto view (HDMI input mode only)
Block 5 age and below
Block 11 age and below
Selected item
Block 13 age and below
Enable/Disable
Block 15 age and below
Block 17 age and below
Description
Set whether or not to use the Auto
Selection of WIDE MODE based on
signal recognition, received from the
HDMI signal.
Block 18 age and below
 WSS
No block
 Input skip
This setting allows you to skip the HDMI or PC input on
the input source selection operation.
HDMI1
Skip input selection of HDMI
HDMI2
HDMI3
WSS allows a television to switch automatically among
the different screen formats. (On, Off)
NOTE
• Try to set the WIDE MODE manually if an image does not
switch to the correct screen format. When the broadcast
signal contains no WSS information, the function will not work
even if enabled.
• Not available for COMPONENT, PC and HDMI signal.
PC
Yes
No
15
LC_60LE631X_EN.indd 15
11/5/2012 10:57:08 AM
Setup menu (Continued)
Option menu
 4:3 mode
Option
PC audio select
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
Selected item
Output volume select
Auto volume
Clear voice
Description
Digital audio output
Wide image without side bars
Panorama
Digital setup
[HDMI1]
[Fixed]
[On]
[On]
[PCM]
Audio only
4 Game play time
Normal range keeping 4:3 or 16:9 aspect
ratio
Normal
4 Colour system
4 Fine sync.
DivX(R) Reg. Code
WSS signal 4:3 screen
4:3 mode “Panorama”
4:3 mode “Normal”
Version up
 PC audio select
When using the PC terminal or HDMI1 terminal, you
must select which terminal uses the AUDIO IN (R/L) jack
for analogue audio input.
Selected item
 Quick start
HDMI1
When connecting devices (including a
PC) with DVI/HDMI cable to the HDMI
1 terminal and inputting analogue audio
signals from the AUDIO IN (R/L) jack.
PC
When connecting a PC to the PC
terminal, and inputting analogue audio
signals from the AUDIO IN (R/L) jack.
You can reduce the TV’s start-up time after turning on
the power with the remote control unit.
Selected item
Description
On
The TV quickly starts up from standby,
more of power consumption is required
during standby.
Off
Power consumption is less than 1W.
 Text language
Select from among 3 kinds of language: West Europe,
Arabic, Farsi.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
 Identification
NOTE
• When connecting devices (including a PC) with digital audio
signal by using HDMI-certified cable to HDMI 1 terminal, you
must set to “PC”. If “HDMI1” is set, there will be no sound
output.
 Output volume select
Allows you to select what controls the audio output.
Selected item
• Sound via speakers is adjusted with
VOL k/l on the remote control unit
or the TV.
• Sound via the AUDIO OUT terminal is
not adjustable and constantly outputs.
Variable
• Sound via the AUDIO OUT terminal
is adjusted with VOL k/l on the
remote control unit or the TV.
• Sound via speakers is muted.
 Reset
• If you execute “Reset”, all the settings such as Picture, Audio
and Programme will be reset to the factory preset values.
Description
Fixed
You can check the current version of the software on the
screen.
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
NOTE
Description
NOTE
• During “Output volume select” is set to “Variable”, all Audio
menu item cannot be adjusted.
 Auto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from movie
to the advertisements. Auto volume solves this problem
and equalises the volume levels. (On, Off)
 Clear voice
This function emphasises speech against background
noise for greater clarity. (On, Off)
NOTE
• Clear voice only work when SRS TS HD is “On”.
16
LC_60LE631X_EN.indd 16
11/5/2012 10:57:09 AM
Option menu (Continued)
Adjusting the PC image automatically
 Digital audio output
This function allows you to select your favourite audio
output system.
Selected item
Dolby Digital
PCM
Description
Dolby Digital audio will be output when
there is a Dolby Digital audio signal. The
output will be in PCM when there is no
Dolby Digital audio signal.
The optical output format is normally in
PCM.
 Audio only
When listening to music from a music programme, you
can set the display off and enjoy audio only.
Selected item
 Fine sync. (PC input mode only)
Description
On
Audio is output without screen image.
Off
Both screen images and audio are
output.
Auto sync.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected with
a commercially available RGB cable, etc.
NOTE
• Auto sync. is likely to succeed when an input PC image has
wide vertical stripes (e.g. pattern with high contrast stripes, or
cross-hatched).
It may fail when an input PC image is solid (low contrast).
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as necessary
to change image position using Auto sync. In some
cases, however, manual adjustment is needed to
optimise the image.
Selected item
Description
H-Position
• When you make operations that change the picture on the TV
such as by changing the input source, the Audio only function
is set to “Off”.
Centres the image by moving it to the left
or right.
V-Position
Centres the image by moving it up or
down.
 Game play time
Clock
Adjusts when the image flickers with
vertical stripes.
Phase
Adjusts when characters have low
contrast or when the image flickers.
NOTE
This function displays the elapsed game time so you do
not lose track of the time.
To display the elapsed time, select “GAME” under
“AV mode” for the input mode of the terminal connected
to the game console before starting the game.
Selected item
Description
On
The elapsed time is displayed every
30 minutes when you switch to GAME
mode in external input mode.
Off
Hides the time.
 Colour system
You can change the colour system to one that is
compatible with the image on the screen. (Auto, PAL,
SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
NOTE
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g. PAL).
• “Colour system” is selectable only when inputting a
composite signal.
NOTE
• For resetting all adjustment items to the factory preset values,
press a/b to select “Reset”, press ENTER, press c/d to
select “Yes”, and then press ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
Input signal
• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it will display when the same signal
(resolution) is input again.
1280 g 768
1360 g 768
 DivX(R) Reg. Code
Please see page 29.
 Version up
This function is only for service personnel to use for
software updates.
17
LC_60LE631X_EN.indd 17
11/5/2012 10:57:09 AM
 Switching subtitle languages (DVB Subtitle)
Digital setup menu
Option
Digital setup
Each time you press [ on the remote control, the
subtitle switches when the broadcast contains subtitle
information.
Audio language
Set “Hearing impaired” to “On”
Subtitle language
Hearing impaired
[Off]
(Hearing impaired)
1st Language
Time zone
Summer time
[Off]
OAD setup
[Off]
Off
Set “Hearing impaired” to “Off”
 Selecting the language
Set up to two preferred multi audio languages to display
if the audio languages are available.
1
2
3
Press MENU and the MENU screen displays.
Press c/d to select “Digital setup”.
Press a/b to select “Audio language”, and then
press ENTER.
4 Press a/b to select “1st Language” or “2nd
Language”, and then press ENTER.
5 Press a/b/c/d to select the desired language,
and then press ENTER.
NOTE
• If audio for the selected languages is not included in a
received broadcast, audio will not be output for that language.
 Displaying subtitles for the hearing impaired
You can display subtitles for the hearing impaired in
the Teletext broadcast if the subtitle languages are
available.
1
2
3
Press MENU and the MENU screen displays.
Press c/d to select “Digital setup”.
Press a/b to select “Subtitle language”, and then
press ENTER.
4 Press a/b to select “1st Language” or “2nd
Language”, and then press ENTER.
5 Press a/b/c/d to select the desired language,
and then press ENTER.
NOTE
• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.
2nd Language
ssssssss
1st Language
Off
ssss
2nd Language
(Hearing impaired)
NOTE
• This function is valid only if broadcaster is transmitting
multilingual subtittles.
 Time zone
This function enables you to select your local time zone.
1
2
3
4
Press MENU and the MENU screen displays.
Press c/d to select “Digital setup”.
Press a/b to select “Time zone”, and then press
ENTER.
Press c/d to select the desired time zone and
then press ENTER.
NOTE
• This function lets you select the right time zone in case the
time displayed in the EPG does not match the local time of
your area.
 Summer time
When the Summer time is set to “On”, the Standard
Time is plus one hour. (Auto, On, Off)
 OAD setup
• This function is for automatically download the data
for the version update software over digital broadcasts
when the “OAD setup” is set to “On”.
• To download, follow the instructions when the
download message appears during a digital broadcast.
CAUTION
• Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the upgrade
to fail. If problem arises ask a qualified service
personnel before the software upgrade period expires.
18
LC_60LE631X_EN.indd 18
11/5/2012 10:57:09 AM
Programme Guide
Info
You can check the current schedule of DTV events and
view detailed information about current events.
1
2
Press GUIDE to display the programme guide list.
Press a/b to display your desired programme,
and then press ENTER.
While watching DTV you can check the extended
programme information on the screen using INFO on the
remote control.
1
2
3
• When you press ENTER, the TV jumps to the channel.
Channel list
020
[Mon.] 18/6 13:27
4
5
6
ABC HDTV
13:23 - 13:30
Dorothy The Dinosaur
002 ABC TV Sydne
Dorothy The Dinosaur
020 ABC HDTV
Dorothy The Dinosaur
021 ABC2
Gardening Australia
022 ABC TV
Dorothy The Dinosaur
ABC2
People Dimensions
13:30 - 14:00
Input Info.
Video : 576i
Audio : MPEG
Age :
09
General INFO screen
Select channel
Page up/down
3
4
ENTER
: Enter RETURN : Back MENU Exit
R Program informati..
Press R to view programme information.
Press RETURN or MENU to exit.
1
2
3
4
5
6
Station name
Title
Time for the current programme
Video system
Audio system (Dolby Digital or MPEG)
Parental rating
• If there is more information, pressing a/b allows you to go
to the next page or return to the previous page.
• You can cancel this info by pressing INFO or EXIT.
19
LC_60LE631X_EN.indd 19
11/5/2012 10:57:09 AM
ATV (Analogue)/DTV/RADIO buttons
Use the following buttons on the remote control to
operate the menu.
DTV
When the TV accesses to DTV mode for the first time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
1 To watch DTV broadcasts, select “DTV” from auto
installation menu. (See page 10)
2 After setting the channels, you can select a
channel using CH r/s or 0 – 9 on the remote
control unit. (See page 6)
Switching the analogue audio
format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches between
NICAM STEREO and MONO.
Stereo mode
ATV: Press to switch to ATV mode. After switching from
DTV, radio or external input mode to ATV mode, the TV
jumps to the most recently viewed ATV channel.
DTV: Press to switch to DTV mode. After switching from
ATV, radio or external input mode to DTV mode, the TV
jumps to the most recently viewed DTV channel.
RADIO: Press to switch to radio mode. After switching
from DTV, ATV or external input mode to radio mode, the
TV jumps to the most recently tuned radio channel.
When you watch the TV for the first time
When the TV powers on for the first time after purchase,
perform the auto installation.
ATV (Analogue TV)
You can run the auto installation to set channels
automatically.
1
2
To watch the analogue TV, select “Auto
installation” from Setup menu. (See page 10)
After setting the channels, you can select a
channel using CH r/s or 0 – 9 on the remote
control unit. (See page 6)
BBC1
ATV
PAL
NICAM
01
B/G
STEREO
BBC1
ATV
PAL
01
B/G
MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and MONO.
Bilingual mode
BBC1
ATV
PAL
NICAM
01
B/G
CH A
BBC1
ATV
01
PAL
NICAM
B/G
CH B
BBC1
ATV
PAL
BBC1
01
ATV
01
B/G
MONO
PAL
NICAM
B/G
CH AB
When receiving a monaural signal
Each time you press MPX, the mode switches between
NICAM MONO and MONO.
Monaural mode
BBC1
ATV
01
PAL
NICAM
B/G
MONO
BBC1
ATV
PAL
01
B/G
MONO
20
LC_60LE631X_EN.indd 20
11/5/2012 10:57:10 AM
Switching the analogue audio
format (Continued)
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches between
STEREO and MONO.
Stereo mode
BBC1
ATV
PAL
BBC1
01
ATV
B/G
STEREO
PAL
01
B/G
MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Bilingual mode
BBC1
ATV
PAL
BBC1
01
ATV
B/G
CH A
PAL
01
B/G
CH B
BBC1
ATV
PAL
01
B/G
CH AB
When receiving a monaural signal
When you press MPX, “MONO” displays.
Monaural mode
BBC1
ATV
PAL
01
B/G
MONO
NOTE
• “BBC1”, “01” and “PAL” are tentative network name, channel
and colour system.
21
LC_60LE631X_EN.indd 21
11/5/2012 10:57:11 AM
EPG
What is an EPG?
An “EPG (Electronic Programme Guide)” is a programme schedule, which is displayed on the TV screen. The EPG is
broadcasted together with DTV. The TV screen shows the EPG when the viewer presses EPG on the remote control,
provided that the TV is receiving the digital broadcasting signal. The EPG enables you to search for a programme, do
timer view the programme schedule in detail.
Basic Operation
 Display the EPG screen
1 Press EPG.
[Tue.] 19 [Wed.] 20 [Thurs.] 21 [Fri.] 22 [Sat.] 23
002
ABC TV Sydney
[Sun.] 24 [Mon.] DTV
Play School
13:30 - 13:55
13:30
ABC TV Syd..002
Play School
...
ABC HDTV
020
Play School
...
ABC2
021
People Dimensions
ABC TV
022
Play School
14:30
2
Australia Wide
...
3
: Select
ENTER
: Enter
MENU
: End
R
Previous d..
G
Next day
Y
Schedule
B
Reminder
2
2 Press c/d/R/G to select the time span you want to search.
• Continue to press d to display programmes in the next time span.
3 Press a/b to select the desired programme.
 Close the EPG screen
4 Press EPG again or MENU to exit.
NOTE
• For “New Zealand delivery model”, the EPG screen and operation differ due to the use of MHEG EPG. The EPG screen and
operation vary depending on the broadcasts.
Reminder timer setting
You can schedule a reminder for future programmes. Channel will automatically change on time as scheduled.
1
2
3
Press EPG.
Press a/b/c/d/R/G to select the programme you want to watch.
Press B to set reminder time.
4
Press ENTER to save reminder timer.
• “Timer Save Success” will display.
NOTE
• “Timer Overlap” will display if same time is set twice.
• “Timer Past” will display if past time is set.
5
Press ENTER to display the reminder schedule list.
6
Press MENU or EPG to exit.
22
LC_60LE631X_EN.indd 22
11/5/2012 10:57:11 AM
Manual Selection
EPG (Continued)
Viewing the reminder schedule list
1
2
3
4
Press EPG.
Press Y to display the reminder schedule list.
Press a/b to display next or previous screen.
Press MENU or EPG to exit.
Cancelling the reminder timer
setting
1
2
3
4
5
Press EPG.
Press Y to display the reminder schedule list.
Press a/b to select a programme you want to
cancel.
Press R to delete a programme from reminder list.
Press MENU or EPG to exit.
Picture and still image
You can freeze a motion picture on the Display.
1 Press FREEZE.
• A still image displays.
You can select different picture sizes that account for the
kind of each picture.
1
Press WIDE.
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable for the
type of video signal currently received.
2
Press WIDE or a/b while the WIDE MODE menu
displays on the screen.
• As you toggle down the options, each mode is
immediately reflected on the TV.
Selected item
Normal
For 4:3 “standard” pictures. A side bar
appears on each side.
Zoom14:9
For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
also see bars on the top and bottom
with some programmes.
Panorama
In this mode the picture is progressively
stretched toward each side of the
screen.
Full
For 16:9 squeeze pictures.
Cinema16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Cinema14:9
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Dot by Dot
Displays an image with the same number
of pixels on the screen (only when
receiving a 1080i/1080p/SXGA/SXGA+
signal)
Underscan
Display with an Underscan image only
when receiving a 720p signal. Display
with the High-Definition image adjusted
optimally. Noise may appear on the edge
of the screen with some programmes.
2
Press FREEZE or RETURN again to exit still
image.
NOTE
• The still image automatically goes out after 30 minutes.
• FREEZE doesn’t function for PC input (all resolution).
Wide Mode
Auto Selection
Description
If you set “WSS” and “4:3 mode” in the Setup menu, the
optimum WIDE mode is automatically chosen for every
broadcast containing the WSS information.
NOTE
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup menu
to “On”. (See page 15)
• Some picture size may not be displayable depending on the
input signal.
“4:3 mode” menu
To set the type of the wide screen, select “Panorama” or
“Normal” in the 4:3 mode menu. (See page 16)
4:3 mode set to “Panorama”
4:3 mode set to “Normal”
NOTE
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
23
LC_60LE631X_EN.indd 23
11/5/2012 10:57:12 AM
Teletext function
PC Control of the TV
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
News, weather reports, sports information, stock
exchange prices and programme previews are among
the many services available.
Turning on and off Teletext
1
2
3
Select a TV channel or external input source
providing the Teletext programme.
Press m to display the Teletext.
Each time you press m, the screen switches as
shown below.
TELETEXT
TELETEXT
NOTE
• If you select a programme with no Teletext signal, “No teletext
available.” is displayed.
• The same message displays during other modes if no Teletext
signal is available.
• New Zealand delivery model can receive MHEG data
broadcasting.
Button functions
Buttons
Description
CH (r/s)
Increase or decrease the page number.
Colour (Red/
Green/Yellow/
Blue)
You can select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control unit.
• When a programme is set, the TV can be controlled
from the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the
volume can be adjusted and various other adjustments
and settings can be made, enabling automatic
programmed playing.
• Attach an RS-232C cable cross-type (commercially
available) to the Din/D-sub RS-232C for the
connections.
NOTE
• This operation system should be used by a person who is
accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC
to match the communications conditions of the TV. The
communications settings of the TV are as follows:
Baud rate:
9,600 bps
Data length:
8 bits
Parity bit:
None
Stop bit:
1 bit
Flow control:
None
Communication procedure
Send the control commands from the PC via the
RS-232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time. Wait
until the PC receives the OK response before sending
the next command.
Command format
Eight ASCII codes e CR
0—9
Directly select any page from 100 to 899
by using 0 — 9.
v (Top/
Bottom/Full)
Switch the Teletext image to Top, Bottom
or Full.
Command 4-digits Parameter 4-digits Return code
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 – 9, space, ?
k (Reveal
hidden for
TELETEXT)
To reveal hidden information such as an
answer to a quiz.
Parameter
3 (Hold)
To stop updating Teletext pages
automatically or release the hold mode.
[ (Subtitle for
TELETEXT)
Display the subtitle during Teletext page.
• Subtitle will not be displayed when
the service does not contain subtitle
information.
Input the parameter values, aligning left, and fill with
space(s) for the remainder (Be sure that four values are
input for the parameter).
When the input parameter is not correct, “ERR” returns
(Refer to “Response code format”).
1 (Subpage)
Display the subpage during Teletext
page.
C1 C2 C3 C4 P1 P2 P3
0
0
0
9
a
3
0
Response code format
Normal response
O
NOTE
• Teletext can display only when it is sent by network. Not used
to convert between languages.
0
P4
K
Return code (0DH)
Problem response (communication error or incorrect
command)
E
R
R
Return code (0DH)
24
LC_60LE631X_EN.indd 24
11/5/2012 10:57:12 AM
PC compatibility chart
Horizontal
Frequency
Vertical
Frequency
VESA
Standard
Analogue
(D-Sub)
720 g 400
31.5 kHz
70 Hz
640 g 480
31.5 kHz


60 Hz



SVGA
800 g 600
XGA
1,024 g 768
37.9 kHz
60 Hz



48.4 kHz
60 Hz


WXGA

1,360 g 768
47.7 kHz
60 Hz



SXGA
1,280 g 1,024
64.0 kHz
60 Hz



SXGA+
1,400 g 1,050
65.3 kHz
60 Hz



Resolution
VGA
Digital (HDMI)
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
RS-232C commands list
Commands
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM
COMMAND
POWER SETTING
P
INPUT
SELECTION A
W
I
T
G
D
_
_
_
I
T
V
D
_
_
_
I
D
T
V
_
_
_
I
A
V
D
*
_
_
D
CHANNEL
H
*
_
*
_
_
_
CONTROL CONTENTS
CONTROL ITEM
COMMAND
PARAMETER
CONTROL CONTENTS
POWER OFF (STANDBY)
W
I
D
E
0
_
_
_
TOGGLE (AV)
_
INPUT SWITCHING (TOGGLE)
W
I
D
E
1
_
_
_
NORMAL (AV)
_
ATV (CHANNEL FIXED)
W
I
D
E
2
_
_
_
ZOOM 14:9 (AV)
_
DTV (CHANNEL FIXED)
W
I
D
E
3
_
_
_
PANORAMA (AV)
_
INPUT 1f7 (1f7)
W
I
D
E
4
_
_
_
FULL (AV)
_
ATV DIRECT CHANNEL
(1f99)
W
I
D
E
5
_
_
_
CINEMA 16:9 (AV)
W
I
D
E
6
_
_
_
CINEMA 14:9 (AV)
WIDE MODE
U
P
_
_
_
_
ATV CHANNEL UP
W
I
D
E
7
_
_
_
NORMAL (PC)
C
H
D
W
_
_
_
_
ATV CHANNEL DOWN
W
I
D
E
9
_
_
_
FULL (PC)
D
T
V
D
*
*
*
_
DTV DIRECT CHANNEL
(1f999)
W
I
D
E
1
0
_
_
DOT BY DOT (AV/PC)
W
I
D
E
1
1
_
_
UNDERSCAN (AV)
M
U
T
E
0
_
_
_
TOGGLE
M
U
T
E
1
_
_
_
MUTE ON
M
U
T
E
2
_
_
_
MUTE OFF
A
C
S
U
0
_
_
_
SRS TS HD TOGGLE
A
C
S
U
1
_
_
_
SRS TS HD ON
A
C
S
U
2
_
_
_
SRS TS HD OFF
A
C
H
A
_
_
_
_
TOGGLE
O
F
T
M
0
_
_
_
OFF
O
F
T
M
1
_
_
_
SLEEP TIMER 30 MIN
O
F
T
M
2
_
_
_
SLEEP TIMER 1 HOUR
O
F
T
M
3
_
_
_
SLEEP TIMER 1 HOUR
30 MIN
O
F
T
M
4
_
_
_
SLEEP TIMER 2 HOUR
O
F
T
M
5
_
_
_
SLEEP TIMER 2 HOUR
30 MIN
T
E
X
T
0
_
_
_
TEXT OFF
T
E
X
T
1
_
_
_
TEXT CHANGE TOGGLE
D
C
P
G
*
*
*
_
DIRECT PAGE JUMP
(100f899)
D
T
U
P
_
_
_
_
DTV CHANNEL UP
D
T
D
W
_
_
_
_
DTV CHANNEL DOWN
V
V
M
M
D
D
0
1
_
_
_
_
_
_
TOGGLE
V
M
D
2
_
_
_
MOVIE
A
V
M
D
3
_
_
_
GAME
A
V
M
D
4
_
_
_
USER
A
V
M
D
5
_
_
_
DYNAMIC (FIXED)
A
V
M
D
6
_
_
_
DYNAMIC
V
M
D
7
_
_
_
MUTE
STANDARD
A
A
POSITION
C
0
H
A
VOLUME
C
R
C
A
AV MODE
SELECTION
PARAMETER
O
SRS TS HD
AUDIO CHANGE
PC
V
O
L
M
*
*
_
_
H
P
O
S
*
*
*
_
VOLUME (0-60)
H-POSITION (AV) (–10f010)
H
P
O
S
*
*
*
_
H-POSITION (PC) (000f180)
V
P
O
S
*
*
*
_
V-POSITION (AV) (–20f020)
V
P
O
S
*
*
*
_
V-POSITION (PC) (000f120)
C
L
C
K
*
*
*
_
CLOCK (000f180)
P
H
S
E
*
*
*
_
PHASE (000f015)
SLEEP TIMER
TEXT
NOTE
• If an underbar (_) appears in the parameter column, enter a
space.
• If an asterisk (*) appears, enter a value in the range indicated
in brackets under CONTROL CONTENTS.
25
LC_60LE631X_EN.indd 25
11/5/2012 10:57:12 AM
USB Media Player
Connecting a USB device
Connect a USB device to the TV as shown below.
USB media
Press INPUT to select the “USB” mode or the TV
automatically switches to the USB mode when a USB
device is connected to the TV.
USB media
In this mode, you can enjoy viewing photos, listening to
music and watching videos from external USB devices.
NOTE
• You cannot enter the USB mode when there is no USB
device.
• “Wide mode” is fixed during “Photo mode”, “Music mode”
and “Movie mode”.
 Selecting modes
USB media player
• The TV automatically switches to the USB mode when
a USB device is inserted in the USB terminal.
• Depending on the USB device, the TV may not be able
to recognise the contained data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending on
character set) may not be displayed.
• Do not disconnect a USB device or memory card
from the TV while transferring files, when a screen is
switching to another or before you exit “USB” mode.
• Do not connect and disconnect a USB device from the
TV repeatedly.
CAUTION
Select mode
Photo mode
:Select
1
2
ENTER
Music mode
Movie mode
:Enter
Press c/d to select among “Photo mode”,“Music
mode” and “Movie mode”.
Press ENTER.
• Do not use a USB extension cable when connecting a USB
device to the USB terminal of the TV.
• Using a USB extension cable may prevent the TV from
performing correctly.
26
LC_60LE631X_EN.indd 26
11/5/2012 10:57:12 AM
USB Media Player (Continued)
 Viewing video
Movie mode
1
2
3
Press c/d to select “Movie mode”, and then
press ENTER.
Press a/b to select the desired folder or
directory, and then press ENTER.
Press a/b to select the desired video.
USB
Select movie
1/1
File name
Folder 1
Folder 2
Folder 3
Movie 1
Movie1.avi
XXX MBytes
XXX x XXX
Buttons for full screen display operation
Buttons
ENTER
Play/Pause the video.
a (Cursor)
Go to the previous file.
b (Cursor)
Go to the next file.
d (Cursor)
The FWD speed changes every time
you press d. After playing to the end,
the player goes to the next file and starts
to play.
c (Cursor)
The REW speed changes every time
you press c. After going back to the
beginning, the player starts to play the
same file.
RETURN
Return to the video list screen.
B button
Reveal/hide the guide display.
R button
Each time you press R button on the
remote control, the subtitle switches.
G button
Each time you press G button on
the remote control, the audio mode
switches.
Buttons for video mode
Buttons
Description
ENTER
When selecting a folder icon: Enter this
directory.
When selecting a video file: Display the
video in full screen.
a/b (Cursor)
Select a desired item.
c/d (Cursor)
RETURN
Page up/down.
Return to the USB select mode.
Description
27
LC_60LE631X_EN.indd 27
11/5/2012 10:57:12 AM
USB Media Player (Continued)
Photo mode
 Viewing thumbnails
Music mode
Select photo
Select music
1/1 Page
1 / 1 Page
Time
File name
USB g220\Audio\mp3
\USB g220\Audio\mp3
SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP3
SONG_08.MP3
SONG_09.MP3
SONG_10.MP3
3:05
3:15
3:02
6:05
4:52
9:25
3:13
3:23
3:33
3:43
Playing:
1
2
3
Press c/d to select “Music mode”, and then
press ENTER.
Press a/b to select the desired folder, and then
press ENTER.
Press a/b to select the desired music, and then
press ENTER.
Buttons for music mode
Buttons
Description
1
2
3
Press c/d to select “Photo mode”, and then
press ENTER.
Press a/b/c/d to select the desired folder, and
then press ENTER.
Press a/b/c/d to select the desired photo, and
then press ENTER.
Buttons for thumbnail operations
Buttons
Description
ENTER
When selecting a folder icon: Enter this
directory.
When selecting a photo thumbnail:
Display the photo in full screen.
a/b/c/d
(Cursor)
Select a desired item.
R button
Previous page.
G button
Next page.
Return to the USB select mode.
Y button
Selecting BGM (Background music).
R button
Stop music.
B button
Slide show.
G button
Play/Pause music.
B button
Audio only.
ENTER
When selecting a folder icon: Enter this
directory.
When selecting a music file: Play the
music.
a/b (Cursor)
Select a desired item.
c (Cursor)
Page up.
d (Cursor)
Page down.
RETURN
NOTE
• When there are invalid music files, the g mark will be
displayed for the file.
• The displayed play time may differ slightly from the actual play
time depending on the files.
NOTE
• When there are invalid photo files, the g mark will be
displayed for the file.
• You can see the file name, shooting date, file size and pixel
size of the selected photo in the lower-left corner of the
screen (shooting date is only available in the EXIF file format).
 Viewing photos in full screen
Buttons for full screen display operation
Buttons
Description
c/d (Cursor)
Go to the previous/next photo in the
same directory.
RETURN
Return to thumbnail mode.
R button
Rotate the photo by 90 degrees to the
left.
G button
Rotate the photo by 90 degrees to the
right.
B button
Reveal/hide the guide display.
NOTE
• Rotating photos only applies to the temporarily selected item
and this setting is not saved.
28
LC_60LE631X_EN.indd 28
11/5/2012 10:57:13 AM
USB Media Player (Continued)
DivX® setup
This is the function to confirm your registration code.
1 Press MENU and the MENU screen displays.
2 Press c/d to select “Option”.
3 Press a/b to select “DivX(R) Reg. Code”, and then press ENTER.
• Copy the 10 digit code down.
 DivX® VOD Code
You need to visit the DivX main page to register your TV. Please follow the online instruction to create DivX account and
DivX registration video download.
Your registration is complete when you play the DivX registration video on TV.
 DivX® Deactivate VOD Code
You can find the deregistration code (8~10 digit). Please use this code to deactivate on DivX website.
NOTE
• Visit vod.divx.com for more information about DivX® VOD.
List of files compatible with USB mode
USB device
USB Memory, USB card reader (Mass Storage class)
File system
FAT/FAT32/NTFS
Photo file format
JPEG (.jpg) (DCF2.0 compliant)
Music file format
MP3 (.mp3)
Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k, 96 k, 112 k, 128 k, 160 k, 192 k, 224 k, 256 k,
320 kbps
Sampling frequency: 32 k, 44.1 k, 48 kHz
Video file format
File extension
Container
Video
*.avi
AVI
DivX 3.11/4/4.12/5.x/6
XviD
H.264
MPEG2
*.mkv
MKV
H.264
MPEG2
MPEG1
*.mp4
MP4
DivX 3.11/4/4.12/5.x/6
XviD
H.264
*.vob
VOB
MPEG2
*.mpg/*.mpeg
PS
MPEG2
MPEG1
*.rm/*.rmvb
RM
RM codec
*.ts/*.trp/*tp
TS
H.264
MPEG2
*.divx
DivX
DivX 3.11/4/4.12/5.x/6
*.dat
DAT
MPEG2
MPEG1
NOTE
•
•
•
•
•
•
Progressive format jpeg files are not supported.
Files in USB 1.1 devices may not be played properly.
Operation using USB hubs is not guaranteed.
The compatibility of USB HDDs may not be guaranteed.
Some video file formats may not be played depending on the file.
Files may not be playable depending on the bitrate.
29
LC_60LE631X_EN.indd 29
11/5/2012 10:57:13 AM
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV
serviced.
Problem
Possible solution
• No power.
• Check if you pressed POWER on the remote control unit. (See pages 7 and 9)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See pages 7 and 9)
• Unit cannot be operated.
• External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
•
•
•
•
• Picture is cut off.
• Is the image position correct? (See page 17)
• Are screen mode adjustments such as picture size made correctly? (See pages 16, 17
and 23)
• Strange colour, light colour, or
dark, or colour misalignment.
•
•
•
•
•
• Power is suddenly turned off.
• The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the ECO setting. (See page 14)
• Is the sleep timer set? (See page 6)
• No picture.
•
•
•
•
•
•
• No sound.
• Is the volume too low? (See page 6)
• Make sure that headphones are not connected.
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to changes in temperature. This does not affect the TV’s performance.
Is battery inserted with polarity (e, f) aligned? (See page 6)
Is battery worn out? (Replace with new battery.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light shining on the remote control sensor?
Adjust the picture tone. (See page 13)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (See pages 11 and 17)
Check the input signal setting. (See page 17)
Check the HDMI auto view setting. (See page 15)
Is the connection to external equipment correct? (See page 5)
Has the input signal setup been performed correctly after connection? (See page 17)
Is the correct input selected?
Is the picture adjustment correct? (See page 13)
Is the antenna connected properly? (See page 4)
Is “On” selected in “Audio only”? (See page 17)
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This
is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
30
LC_60LE631X_EN.indd 30
11/5/2012 10:57:13 AM
Specifications
Item
Model
LC-60LE631X
LCD panel
60o (1525 mm) UV2A & BLACK TFT LCD
Resolution
2,073,600 pixels (1920 g 1080)
Video colour system
TV function
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV-standard
Receiving
channel
Analogue
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1
Digital
DVB-T
VHF/UHF
44.25—863.25 MHz
CATV
S1—S41ch (including Hyperband)
TV-tuning system
Auto Preset 99 ch
STEREO/BILINGUAL
NICAM: B/G, I, D/K A2 stereo: B/G
Viewing angles
H : 176º V : 176º
Audio amplifier
10 W g 2
3.2 g 15 cm 2pcs
Speakers
Terminals
Antenna input
UHF/VHF 75 q DIN type
HDMI 1
HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz,
1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz), AUDIO in (common use with
PC) ( 3.5 mm jack)
HDMI 2
HDMI 3
HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz,
1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz)
INPUT 4
VIDEO in, AUDIO in
INPUT 5
VIDEO in, AUDIO in
INPUT 6
AUDIO in, COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz,
1080I/50Hz, 1080I/60Hz)
AUDIO OUT
Audio out
AUDIO IN (R/L) (HDMI1/PC)
PC
3.5 mm jack*
15 pin mini D-sub, AUDIO in (common use with HDMI 1) ( 3.5 mm jack)
USB
USB
RS-232C
9 pin D-sub male connector
DIGITAL AUDIO OUTPUT
Optical Digital Audio Output
Headphones
3.5 mm jack
OSD language
English
Power requirement
AC 110 — 240 V, 50/60 Hz
Power consumption
Dimensions
188 W (0.5 W Standby)
without stand (mm)
1384 (W) g 839 (H) g 73 (D)
with stand (mm)
1384 (W) g 874 (H) g 341.5 (D)
Weight without stand (with stand)
25.5 kg (28.5 kg)
Operating temperature
0 °C — 40 °C
* The HDMI1 and PC terminals can both use the same audio input terminal.
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
Optional accessory
Some of the listed optional accessories may not be available
depending on the region.
Please check with your nearest Sharp Authorised Dealer for
current optional accessories as we may add more optional
accessories from time to time.
Part name
Model number
Wall mount bracket
AN-52AG4
CAUTION
• This TV should be mounted on the wall only with the listed (SHARP) wall mount bracket. The use of other wall mount brackets may
result in an unstable installation and may cause serious injuries.
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in
accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
31
LC_60LE631X_EN.indd 31
11/5/2012 10:57:13 AM
Protection against overturning
Removing the stand
There is a danger of the product overturning in the case
of a disaster or sudden collision. Carry out the following
tip-resistant measurement for your safety.
For wall mounting with the optional bracket (AN-52AG4)
remove the stand.
Anchoring the TV to the wall or a pillar
• Remove the connected cables (DVD, VCR, etc) from the
terminals.
• Detach the four caps at the 4 locations on the rear of the TV.
1
Affix the TV to the wall or a pillar using extra strong
ties and cup hooks.
Before setting TV on the wall
1
Unfasten the screws at the 4 locations on the rear
of the stand.
2
Detach the stand from the TV (hold the stand so it
will not drop from the edge of the base area).
 Cup hook (commercially available)
 Tie (commercially available)
Fixing the TV to the table
1
2
3
Place the TV on the table.
Pull the attached restraining bracket out so that it
is at a 90 degrees angle.
Insert commercially available screws in the holes
of the restraining bracket and tighten the screws
to secure the TV to the table.
• Use commercially available screws to firmly secure the
TV.
NOTE
• To attach the stand, perform the above steps in reverse order.
• As the TV is very heavy, be careful when moving it.
Stand
 Screw (commercially available)
 Restraining bracket (attached)
CAUTION
• As this product is heavy, use a table that is wide
enough to support the product and capable of
withstanding the product’s weight. The table should be
set where it will not be overturned.
• Be sure to use at least two people when moving the TV.
32
LC_60LE631X_EN.indd 32
11/5/2012 10:57:13 AM
Mounting the TV on a wall
To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV,
and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
1
2
1
• This TV should be mounted on a wall only with the wall mount bracket available from SHARP (See page 31). The use of
other wall mount brackets may result in an unstable installation and may cause serious injuries.
• Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
• When you mount the TV on a wall, you should attach the supporting post.
• Detach the AC cord holder on the rear of the TV before mounting the TV on a wall.
Hanging on the wall
About setting the TV angle
AN-52AG4 wall mount bracket
(see the bracket instructions for details).
Vertical mounting
Angular mounting
AN-52AG4
33
LC_60LE631X_EN.indd 33
11/5/2012 10:57:14 AM
Dimensional drawings
Unit: mm
1384
1333*1
1333
*1
341.5
400
386
438
178
10°
106
219
AN-52AG4
I
Active area
NOTE
• Dimensions do not include protrusions such as screws and some parts.
34
LC_60LE631X_EN.indd 34
11/5/2012 10:57:14 AM
CLEARING THE PASSWORD
If you forget the password, clear the password using the following procedure.
1
2
3
4
Press MENU to display the MENU screen, and then press c/d to select
“Setup”.
Press a/b to select “Child lock”, and then press ENTER and the
password input screen display.
If you enter “3001” using 0 – 9, the “Child lock” setting menu will be
displayed.
Enter the 4-digit number as a password using 0 – 9. The new password is
now set.
The Password is
.
NOTE
• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
35
LC_60LE631X_EN.indd 35
11/5/2012 10:57:15 AM
Memo
36
LC_60LE631X_EN.indd 36
11/5/2012 10:57:15 AM
cover2_LC_60LE630X_B5.indd 54
10/23/2012 6:12:27 PM
Printed in Malaysia
TINS-F665WJZZ
12P12-MA-NF
cover2_LC_60LE630X_B5.indd 55
10/23/2012 6:12:28 PM