CD-E800W(A) TINSE0908AWZZ
MINI COMPONENT SYSTEM
MODEL
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please
read this manual carefully. It will guide you in operating
your SHARP product.
CD-E800W Mini Component System consisting of
CD-E800W (main unit) and CP-E800 (speaker system).
CD-E800W
OPERATION MANUAL
03/8/27
CD-E800W(A)FR.fm
TINSE0908AWZZ
1
CD-E800W
Special notes
Important Instruction
Warning:
! When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit. When the ON/
STAND-BY button is set at STAND-BY position, the unit may be
brought into operation by the timer mode or remote control.
! This unit contains no user serviceable parts. Never remove covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any
service operation and when not in use for a long period.
! To prevent fire or shock hazard, do not expose this appliance to
dripping or splashing. No objects filled with liquids, such as
vases, should be placed on the apparatus.
Note for users in Australia:
Copyright may exist in material you wish to record. Copying or
broadcasting such material without permission of the relevant licensees or owners of the copyright is prohibited by law. SHARP is
not in a position to authorise the copying or broadcasting of copyright materials and nothing in this OPERATION MANUAL should be
implied as giving that authority.
CAUTION
! This product is classified as a CLASS 1 LASER product.
! Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
As the laser beam used in this compact disc player is harmful to
the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
Laser Diode Properties
Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
For other countries:
Audio-visual material may consist of copyrighted works which must
not be recorded without the authority of the owner of the copyright.
Please refer to the relevant laws in your country.
1
03/8/27
CD-E800W(A)1.fm
TINSE0908AWZZ
CD-E800W(A) TINSE0908AWZZ
Accessories
Contents
Please confirm that the following accessories are included.
CD-E800W
" General Information
Page
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 6
" Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 9
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
" Basic Operation
"AA" size battery (UM/SUM-3,
R6, HP-7 or similar) 2
Sound control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
" CD Playback
Listening to a CD (CDs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 14
Advanced CD playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 16
" Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 18
AM loop aerial 1
Note:
Only the above accessories are included.
FM aerial 1
" Tape Playback
Listening to a cassette tape (TAPE 1) . . . . . . . . . . . . . . . . . . . 19
Listening to a cassette tape (TAPE 2) . . . . . . . . . . . . . . . . . . . 20
" Karaoke
Playing karaoke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 22
" Tape Recording
General Information
Remote control 1
Recording to a cassette tape . . . . . . . . . . . . . . . . . . . . . . . 23, 24
" Advanced Features
Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . .25 - 27
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
" References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 30
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 32
2
03/8/27
CD-E800W(A)1.fm
TINSE0908AWZZ
2
CD-E800W
Precautions
" General
! Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free
space along the sides, top and back of the equipment.
10 cm (4") 10 cm (4")
10 cm (4")
General Information
10 cm (4")
! Use the unit on a firm, level surface free from vibration.
! Keep the unit away from direct sunlight, strong magnetic fields,
excessive dust, humidity and electronic/electrical equipment
(home computers, facsimiles, etc.) which generate electrical
noise.
! Do not place anything on top of the unit.
! Do not expose the unit to moisture, to temperatures higher than
60°C (140°F) or to extremely low temperatures.
! If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
! In case of an electrical storm, unplug the unit for safety.
! Hold the AC power plug by the head when removing it from the
wall socket, as pulling the lead can damage internal wires.
! Do not remove the outer cover, as this may result in electric
shock. Refer internal service to your local SHARP service
facility.
! The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
! No naked flame sources, such as lighted candles, should be
placed on the apparatus.
! Attention should be drawn to the environmental aspects of battery disposal.
! This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage other than that
which is specified.
" Volume control
The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
" Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collection and player.
! Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
! Keep your discs away from direct sunlight, heat, and excessive
moisture.
! Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
NO
YES
Correct
3
03/8/27
CD-E800W(A)1.fm
TINSE0908AWZZ
Controls and indicators
CD-E800W
1
1
2
12
3
4
5
6
7
8
9
13
14
15
16
17
18
19
10
11
20
21
22
23
24
25
26
27
28
29
Reference page
1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Timer Set Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3. Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . 12, 16, 18
4. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 25
6. Timer/Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 27
7. Tuning and Time Up Button . . . . . . . . . . . . . . . . . . . . . 12, 17
8. Tuning and Time Down Button . . . . . . . . . . . . . . . . . . . 12, 17
9. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
10. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . 23, 24
11. Tape 1 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 19
12. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . 11
13. Extra Bass/Demo Mode Button . . . . . . . . . . . . . . . . . . . 9, 11
14. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
15. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 13
16. Disc Skip Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
17. Microphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
18. Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 20
19. Microphone Level Control . . . . . . . . . . . . . . . . . . . . . . . . . . 21
20. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
21. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 20
22. CD or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . 14, 19, 20
23. Tape 2 Reverse Play Button . . . . . . . . . . . . . . . . . . . . . . . . 20
24. CD Track Down or Fast Reverse, Tape 2 Fast Wind,
Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . 14, 18, 20
25. Tape 2 Reverse Mode Select Button . . . . . . . . . . . . . . . . . 20
26. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
27. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
28. CD Play or Repeat, Tape 1 Play,
Tape 2 Forward Play Button . . . . . . . . . . . . . . . 13, 15, 19, 20
29. CD Track Up or Fast Forward, Tape 2 Fast Wind,
Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . . . . 14, 18, 20
General Information
" Front panel
4
03/8/27
CD-E800W(A)1.fm
TINSE0908AWZZ
CD-E800W
Controls and indicators (continued)
" Display
1 2
3
4 5 6 789
12
13
10
11
General Information
14 15 16
4
5
6
7
8
1
2
" Rear panel
Reference page
1. Cooling Fan
2. AC Voltage Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8
4. FM 75 Ohms Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. FM Aerial Earth Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6. AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7. Span Selector Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8. Video/Auxiliary (Audio Signal) Input Sockets . . . . . . . . . . 28
9. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8
9
3
1
2
1. CD Pause Indicator
2. Extra Bass Indicator
3. Disc Number Indicators
4. Tape 2 Record Indicator
5. FM Stereo Mode Indicator
6. FM Stereo Receiving Indicator
7. Timer Play Indicator
8. Sleep Indicator
9. Timer Recording Indicator
10. CD Play Indicator
11. CD Repeat Play Indicator
12. Karaoke Mode Indicator
13. Tape Reverse Mode Indicator
14. Tape 2 Reverse Play Indicator
15. Tape 1 Play or Tape 2 Forward Play Indicator
16. Memory Indicator
3
Note:
This product is equipped with a cooling fan inside, which begins to
run at a specified volume level for better heat radiation.
4
5
" Speaker system
1. Super Tweeters
2. Woofer
3. Tweeter
4. Passive Radiator
5. Speaker Wire
5
03/8/27
CD-E800W(A)1.fm
TINSE0908AWZZ
CD-E800W
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . 13, 16, 23
3. CD Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4. Programme Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5. Echo Level Up and Down Buttons . . . . . . . . . . . . . . . . . . . 21
6. Karaoke Mode Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
7. CD Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. CD Track Down or Fast Reverse,
Tape 2 Fast Wind Button . . . . . . . . . . . . . . . . . . . . . . . . . 14, 20
9. Tape 2 Reverse Play Button . . . . . . . . . . . . . . . . . . . . . . . . . 20
10. CD or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . 14, 19, 20
11. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . . . 23, 24
12. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
13. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 20
14. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
15. CD Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
16. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
17. Tuner Preset Up and Down Buttons . . . . . . . . . . . . . . . . . . . 18
18. CD Track Up or Fast Forward,
Tape 2 Fast Wind Button . . . . . . . . . . . . . . . . . . . . . . . . . 14, 20
19. CD Play or Repeat, Tape 1 Play,
Tape 2 Forward Play Button . . . . . . . . . . . . . . . . 13, 15, 19, 20
20. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
21. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . . 11
22. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . 11
23. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
24. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
General Information
! Remote control
Buttons with " " mark in the illustration or highlighted in bold on the
right can be operated on the remote control only.
6
03/8/27
CD-E800W(A)1.fm
TINSE0908AWZZ
CD-E800W
System connections
! Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal
can be received.
FM aerial
AM loop aerial
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Right speaker
Preparation for Use
Left speaker
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Wall
Screws
(not supplied)
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.
External
FM aerial
Wall socket
(See page 8.)
75 ohm
coaxial
cable
Red
Black
Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
7
03/8/27
CD-E800W(A)1.fm
TINSE0908AWZZ
CD-E800W
! Speaker connection
! Connecting the AC power lead
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug the
unit first, the unit will enter the demonstration mode (see page 9).
Notes:
" The unit will start the tape initialisation when plugged in to the AC
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
Incorrect
! Placing the speaker system
The left and right speakers have individual shapes. For best performance, place the speakers according to the diagram below.
Left speaker
230V
240V
Right speaker
Wall socket
Preparation for Use
Caution:
" Use speakers with an impedance of 6 ohms
or more, as lower impedance speakers can
damage the unit.
" Do not mistake the right and the left channels. The right speaker is the one on the right
side when you face the unit.
" Do not let the bare speaker wires touch
each other.
" Do not stand or sit on the speakers. You may
be injured.
2
Note:
The speaker grilles are not removable.
(230 - 240 V, 50/60 Hz)
! Setting the AC voltage selector
Check the setting of the AC voltage selector located on the rear
panel before plugging the unit into a wall socket. If necessary, adjust
the selector to correspond to the AC power voltage used in your
area.
Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230
V - 240 V AC).
8
03/8/27
CD-E800W(A)1.fm
TINSE0908AWZZ
CD-E800W
System connections (continued)
! Setting the FM/AM span selector
! Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
Preparation for Use
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The demonstration mode will be
cancelled and the display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
The International Telecommunication Union (ITU) has established
that member countries should maintain either a 100 kHz or a 50 kHz
interval between broadcasting frequencies of FM stations and 10
kHz or 9 kHz for AM station. The illustration shows the 50/9 kHz
zones (regions 1 and 3), and the 100/10 kHz zone (region 2).
Before using the unit, set the SPAN SELECTOR switch (on the rear
panel) to the interval (span) of your area.
To change the tuning zone:
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Set the SPAN SELECTOR switch (on the rear panel) as follows.
" For 50 kHz FM interval (9 kHz in AM) 50/9
" For 100 kHz FM interval (10 kHz in AM) 100/10
3 Whilst pressing down the button and the X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears.
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
9
03/8/27
CD-E800W(A)1.fm
TINSE0908AWZZ
CD-E800W(A) TINSE0908AWZZ
Remote control
! Battery installation
1
2
3
Remove the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
Replace the cover.
CD-E800W
Notes concerning use:
" Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
" Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
" Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
" Keep the remote control away from moisture, heat, shock, and
vibrations.
2
Check the remote control after checking all the connections (see
pages 7 - 8).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
Remote sensor
Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Installing the batteries incorrectly may cause the unit to malfunction.
Preparation for Use
! Test of the remote control
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leakage.
3
0.2 m - 6 m
(8" - 20')
10
03/8/27
CD-E800W(A)1.fm
TINSE0908AWZZ
CD-E800W
Sound control
! Bass control
Basic Operation
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
(X-BASS) button.
X-BASS indicator
! Equaliser
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeatedly until the desired sound mode appears.
FLAT
The sound is not modified.
! Volume control
ROCK
Bass and treble are emphasised.
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
CLASSIC Treble is cut a little.
POPS
Bass and treble are slightly emphasised.
Remote control operation:
Press the VOLUME ( or ) button to increase or decrease the volume.
VOCAL
Vocals (midrange tones) are emphasised.
JAZZ
Treble is slightly emphasised.
0
1
2 ..... 29 30 MAXIMUM
11
03/8/27
CD-E800W(A)2.fm
TINSE0908AWZZ
Setting the clock
CD-E800W
4
Press the TUNING/TIME ( or ) button to adjust the hour
and then press the MEMORY/SET button.
3
" Press the TUNING/TIME ( or ) button once to advance
the time by 1 hour. Hold it down to advance continuously.
" When the 12-hour display is selected, "AM" will change automatically to "PM".
Press the TUNING/TIME ( or ) button to adjust the minutes and then press the MEMORY/SET button.
In this example, the clock is set for the 24-hour (0:00) display.
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK button and within 5 seconds, press the
MEMORY/SET button.
Press the TUNING/TIME ( or ) button to select 24-hour or
12-hour display and then press the MEMORY/SET button.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset. [Refer to "Clearing all the memory (reset)" on
page 30 for details.]
" Press the TUNING/TIME ( or ) button once to advance
the time by 1 minute. Hold it down to change the time in 5minute intervals.
" The hour will not advance even if minutes advance from "59"
to "00".
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 5
seconds.
Basic Operation
5
Note:
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not flashing in step 2, step 3 (for selecting the 24-hour or 12-hour display)
will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 30 for details.]
2 Perform "Setting the clock" from step 1.
12
03/8/27
CD-E800W(A)2.fm
TINSE0908AWZZ
CD-E800W
Listening to a CD (CDs)
This system can also play audio CD-R and CD-RW discs, but cannot record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of disc or the device that was used for recording.
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to
turn the disc tray, then place the CD in the open position.
" CDs can be placed on any open position on the disc tray.
" Be sure to place 8 cm (3") CDs in the middle of the disc positions.
CD Playback
12 cm (5") 8 cm (3")
5
Press the OPEN/CLOSE
Total number of tracks on
the CD whose number is
flashing
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the CD button.
Press the OPEN/CLOSE
button to open the disc tray.
button to close the disc tray.
Total playing time of the CD
whose number is flashing
6
To select the CD you want to listen to first, press one of the
1 - 3 buttons on the remote control.
7
Press the (
) button to start playback.
" Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will
automatically start playback.
" When the last track on the third disc has finished playing, the
CD player will automatically stop.
" When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will begin to play.
13
03/8/27
CD-E800W(A)2.fm
TINSE0908AWZZ
CD-E800W
! To locate the beginning of a track
button.
To stop playback:
Press the button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the
DISC SKIP button to rotate the disc tray and remove the remaining
disc.
Caution:
" Do not place two CDs in one disc tray.
" Do not play discs with special shapes (heart- or octagonshaped). It may cause malfunctions.
" Do not push the disc tray whilst it is moving.
" Do not turn the disc tray by hand. This may cause malfunctions.
" If the power fails whilst the tray is open, wait until the power is
restored.
" If the disc tray is stopped with force, "ER-CD10" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
" If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
" If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
4
Notes:
" You can locate the beginning of a track on a single disc only.
or
button
" You can skip to any track by pressing the
repeatedly until the desired track number appears.
! To locate the desired portion
For audible fast forward:
Press and hold down the
For audible fast reverse:
Press and hold down the
button during playback.
button during playback.
Notes:
or
button is
" Normal playback will resume when the
released.
" You can locate the desired portion on a single disc only.
" When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.
CD Playback
To interrupt playback:
Press the CD button on the remote control.
To resume playback from the same point, press the
14
03/8/27
CD-E800W(A)2.fm
TINSE0908AWZZ
CD-E800W
Advanced CD playback
! Direct search of the track
! Repeat play
By using the direct search buttons, the desired tracks can be played.
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
1
Whilst in the stop mode, press one of the 1 - 3 buttons
on the remote control or DISC SKIP button to select the desired disc.
2
Use the direct search buttons
on the remote control to select
the desired track.
Selected track number
" The direct search buttons allow you to select up to number 9.
" When selecting number 10 or more, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
CD Playback
To repeat all tracks on up to 3 discs:
Press the (
) button twice.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed play" section on page 16
and then press the (
) button twice.
To cancel repeat play:
Press the (
) button again. " " will go out.
! Random play
The tracks on the disc(s) can be played in random order automatically.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
3
Press the
button to start playback.
Playback of the selected track is started. When the end of last
track of the disc selected is reached, the next disc will be automatically started.
To stop playback:
Press the button.
Notes:
" The selected track can be started simply by pressing the direct
search buttons during playback. (It is not necessary to press the
button.)
" A track number higher than the number of tracks on the disc cannot be selected.
" During random play, direct search is not possible.
Press the RANDOM button on the remote control to begin random play.
To cancel random play:
Press the
button.
Notes:
button during random play, you can move
" If you press the
to the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous track. The beginning of the track being played will be located.
" In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
ton. Otherwise, the disc(s) will play continuously.
but-
15
03/8/27
CD-E800W(A)2.fm
TINSE0908AWZZ
CD-E800W
You can choose up to 32 selections for playback in the order you
like.
1
2
Whilst in the stop mode, press
one of the 1 - 3 buttons on
the remote control to select
the desired disc.
Selected disc number
Press the direct search buttons on the remote control to
select the desired track.
Selected track number
You can also select a track by pressing the
or
button.
3
Press the MEMORY/SET (MEMORY) button to save the
track number.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track will
be cleared, beginning with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
" Opening the disc tray automatically cancels the programmed
sequence.
" Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed selections will not be cleared.
" During programme operation, random play is not possible.
Playback order
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5
Press the
(
4
CD Playback
! Programmed play
) button to start playback.
16
03/8/27
CD-E800W(A)2.fm
TINSE0908AWZZ
CD-E800W
Listening to the radio
3
Press the TUNING/TIME ( or ) button to tune in to the desired station.
Manual tuning:
Press the TUNING/TIME button as many times as required to
tune in to the desired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Radio
Notes:
" When radio interference occurs, auto scan tuning may stop
automatically at that point.
" Auto scan tuning will skip weak signal stations.
" To stop the auto tuning, press the TUNING/TIME button
again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " " will appear when an FM broadcast is in stereo.
FM stereo mode indicator
! Tuning
1
2
Press the ON/STAND-BY button to turn the power on.
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
FM stereo receiving indicator
" If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer.
Note:
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
17
03/8/27
CD-E800W(A)2.fm
TINSE0908AWZZ
CD-E800W
! Memorising a station
! To recall a memorised station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
This can be operated by pressing the TUNER PRESET ( or )
button on the remote control.
Perform steps 1 - 3 in "Tuning" on page 17.
Press the MEMORY/SET button to enter the preset tuning
saving mode.
! To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1
3
4
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
Within 30 seconds, press the MEMORY/SET button to store
that station in memory.
2
Press the PRESET ( or ) button for more than 0.5 seconds.
" The preset number will flash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
" This can be operated by pressing the TUNER PRESET ( or
) button on the remote control.
Press the PRESET ( or ) button again when the desired station is located.
! To erase entire preset memory
1
2
Press the ON/STAND-BY button to enter the stand-by mode.
Whilst pressing down the TUNER (BAND) button and the XBASS/DEMO button, press the ON/STAND-BY button until
"TUNER CL" appears.
5
Radio
1
2
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset station.
When a new station is stored in memory, the station previously
memorised will be erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or if the AC lead is disconnected.
18
03/8/27
CD-E800W(A)2.fm
TINSE0908AWZZ
CD-E800W
Listening to a cassette tape (TAPE 1)
Tape Playback
Before playback:
" For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not recommended.)
" Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1
2
3
Press the ON/STAND-BY button to turn the power on.
4
Load a cassette into the TAPE 1
cassette compartment with the
side to be played facing toward
you.
5
Press the
Press the TAPE (1
2) button to select TAPE 1.
Open the cassette door by pushing the area marked "PUSH
EJECT ".
(
) button to start playback.
To stop playback:
Press the button.
Note:
You cannot fast-forward or rewind the cassette in the TAPE 1 compartment.
19
03/8/27
CD-E800W(A)2.fm
TINSE0908AWZZ
Listening to a cassette tape (TAPE 2)
CD-E800W
Load a cassette into the TAPE 2
cassette compartment with side A
facing you.
5
Press the
button to choose one
side or both sides.
6
... To listen to both sides.
... For endless repeat play of both sides.
... To listen to one side.
6
Press the
(
) button to listen to side A, or the
[(TAPE-2) ] button for side B.
To play both sides ( ), start from side A. When playback starts
from side B, side A will not be played.
To stop playback:
Press the button.
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the TAPE (1
2) button to select TAPE 2.
Open the cassette door by pushing the area marked "PUSH
EJECT ".
Fast forward/rewind on side A:
To advance the tape, press the
the
button.
button. To rewind it, press
Fast forward/rewind on side B:
To advance the tape, press the
the
button.
button. To rewind it, press
Tape Playback
4
Caution:
" To remove the cassette, press the button, and then open the
compartment.
" Before changing from one tape operation to another, press the
button.
" If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
20
03/8/27
CD-E800W(A)2.fm
TINSE0908AWZZ
CD-E800W
Playing karaoke
You can enjoy karaoke to CDs, radio, cassettes, and other external
devices by connecting a separately available microphone to this
unit.
3
4
Press the ON/STAND-BY button to turn the power on.
5
Adjust the volume of the audio source using the VOLUME
control.
6
Turn the MIC LEVEL control towards MAX to increase the
microphone volume and towards MIN to decrease it.
7
Press the ECHO LEVEL + button on the remote control to
increase the microphone echo, and the ECHO LEVEL - button to decrease it.
Press the CD, TUNER (BAND), TAPE (1 2) or VIDEO/AUX
button to select the audio source and play it.
Karaoke
Notes:
! When you sing too loud through the microphone, your voice may
be distorted depending on the devices connected. If this happens, lower the microphone volume.
! If an extremely sensitive microphone is used, howling may be
generated.
! Unidirectional microphone is more appropriate for vocal use.
If squealing occurs:
! Reduce the microphone volume.
! Change the direction of the microphone.
! Reduce the volume of the main unit.
! Move the microphone away from the speakers.
1
Set the MIC LEVEL control to MIN to protect the speakers
from shock noise and to avoid disturbing noises.
2
Connect the microphone to the MIC socket.
Caution:
! When not using the microphone, remove it from the MIC socket.
! When connecting or disconnecting the microphone, set the MIC
LEVEL control to MIN.
! Use a microphone with a 6.3 mm (1/4") plug, an impedance
of 600 ohms.
! Use a standard plug adaptor when using a microphone with
a 3.5 mm (1/8") diameter plug.
21
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
CD-E800W
Sound of the playback source can be switched among the STEREO, L-CH, R-CH, and V-CANCEL (VOCAL CANCEL) modes.
The audio mode function is used when the left and right channels
have individual signals from each other.
Press the KARAOKE MODE button on the
remote control until the desired audio
mode is displayed.
Each time the KARAOKE MODE button is
pressed, the mode will change as follows:
STEREO
L-CH
R-CH
V-CANCEL
STEREO
Sounds on the left and right channels are played.
L-CH
Sounds on the left channel only are played.
R-CH
Sounds on the right channel only are played.
V-CANCEL
The main vocal is lowered.
Notes:
! The initial audio mode setting is "STEREO".
! In any mode other than the STEREO mode, " " will appear.
! The setting will remain unchanged when you change the disc,
you set the unit to the stand-by mode or the function is changed
from the CD to another function.
! When playing a sound multiplexed disc on which a vocal and
music have been separately recorded, select the audio mode as
desired.
" To change general stereo source to karaoke
source
Even ordinary discs and tapes not recorded specifically for karaoke
can be used for karaoke just by toning down the main vocal.
Press the KARAOKE MODE button on the remote control until
"V-CANCEL" appears in the display.
" " will appear.
Notes:
! Use discs recorded in stereo. The function will not work with
mono sources.
! With some discs and tapes the original vocals may still be heard.
Notes on sound multiplexed karaoke discs:
Sound multiplexed karaoke discs are discs on which the main vocal
and the BGM (Background music) have been recorded on one of
the two channels and only the BGM on the other.
! The function will not work properly with discs which do not belong
to this group.
! Discs on which vocal has been recorded on the left channel and
music on the right may not play properly.
" Recording of mixed sound to a cassette tape
You can record mixed sound from the microphone and CD, TUNER,
TAPE 1 or VIDEO/AUX.
1 Perform steps 1 - 3 in "Playing karaoke" on page 21.
2 Press the CD, TUNER (BAND), TAPE (1 2) or VIDEO/AUX
button to select the audio source.
3 Load a cassette into the TAPE 2 cassette compartment with side
A facing you.
4 Perform steps 5 - 7 in "Playing karaoke" on page 21.
5 Press the
button to choose one side or both sides.
6 Press the REC PAUSE (TAPE-2
) button.
7 Press the (
) button to record on side A, or the [(TAPE2) ] button for side B.
7
Karaoke
" To change the audio mode
" Recording of the microphone signals only to a
cassette tape
1
2
3
Perform step 1 above.
Press the TAPE (1 2) button until "TAPE 2" appears on the display.
Perform steps 3 - 7 above.
22
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
CD-E800W
Recording to a cassette tape
Tape Recording
Before recording:
! When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
! SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
! The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
! For recording, use only normal tapes. Do not use metal or
CrO tapes.
! Recording can be operated in the TAPE 2 compartment. The
TAPE 1 is for playback only.
Erase-prevention tab of cassette tapes:
! When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
! To protect the recorded sound, remove
the tab after recording. Cover the tab
hole with adhesive tape to record on the
tape without the tab.
" Recording from a CD (CDs)
You can record 3 CDs continuously.
1
2
Press the ON/STAND-BY button to turn the power on.
3
4
Press the CD button and load the desired disc.
5
Press one of the 1 - 3 buttons on the remote control to
select the disc to be recorded first.
6
Press the REC PAUSE (TAPE-2
) button.
Side A
Tab for
side B
Tab for
side A
Load a cassette into the TAPE 2 cassette compartment with
side A facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Press the
button to choose
one side or both sides.
... To record on both sides.
... To record on only one side.
Recording will be paused.
7
Press the
(
) button to record on side A, or the
[(TAPE-2) ] button for side B.
! To record on both sides, begin with side A. (If recording is
started from side B, the tape will not switch over to side A.)
! Recording is started from the selected CD. When the playback of the last disc is finished or the end of the tape is
reached, the CD and the cassette will stop automatically.
! CD playback will start approximately 7 seconds after the tape
starts.
To perform programmed recording:
1 Programme discs and tracks. (See page 16.)
2 Press the REC PAUSE (TAPE-2
) button.
3 Press the (
) button to record on side A, or the
2) ] button for side B.
[(TAPE-
To stop recording:
Press the button.
The CD and tape will stop.
23
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
CD-E800W
" Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1
2
Press the ON/STAND-BY button to turn the power on.
" Recording from the radio
Load a prerecorded cassette into the TAPE 1 cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment.
It is recommended that the recording tape is the same length as
the master tape.
1
2
Tune in to the desired station. (See page 17.)
3
Load a cassette into the TAPE 2 cassette compartment with
side A facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Press the TAPE (1
2) button
until "TAPE 1" appears on the
display.
The reverse mode will be set to " ".
4
3
Press the
button to choose
one side or both sides.
... To record on both sides.
... To record on only one side.
Press the REC PAUSE (TAPE-2
) button.
5
4
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
5
Press the
(
) button to record on side A, or the
[(TAPE-2) ] button for side B.
To record on both sides, begin with side A. (If recording is started from side B, the tape will not switch over to side A.)
To interrupt recording:
Press the REC PAUSE (TAPE-2
) button.
To resume recording, press the same recording button you pressed
in step 5. Other buttons do not allow resuming.
To stop recording:
Press the button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
Tape Recording
Note:
Whilst recording, OPEN/CLOSE button is deactivated. It is recommended to perform CD recording after closing the disc tray.
Auto restart function:
If the recording side is switched from side A to B during recording,
the system will record the interrupted track on side B from its beginning. The recording will be made without cutting the beginning of the
track on side B.
Recording will be paused.
Press the
(
) button to start dubbing.
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
" Erasing recorded tapes
1
2
3
4
5
Load the tape to be erased into the TAPE 2 cassette compartment with the side to be erased facing toward you.
Press the TAPE (1 2) button until "TAPE 2" appears on the display.
Set the
button to " " to erase only one side and to " " to
erase both sides.
Press the REC PAUSE (TAPE-2
) button.
Press the (
) button to erase side A, or the [(TAPE-2) ]
button to erase side B.
To erase both sides, begin with side A. (If erasing is started from
side B, the tape will not switch over to side A.)
Note:
Make sure that the TAPE 1 is not in use.
24
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
8
CD-E800W
Timer and sleep operation
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at
the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
" Timer playback or timer recording
Before setting timer:
1
2
Advanced Features
Sleep operation:
The radio, compact disc and cassette tape can all be turned off
automatically.
Press the CLOCK button to check that the clock is set to the
correct time. (Refer to page 12.)
For timer playback:
Load a cassette or discs to be played.
For timer recording:
Load a cassette for recording in the TAPE 2 cassette compartment.
1
2
Press the ON/STAND-BY button to turn the power on.
3
Adjust the volume using the VOLUME control.
Press the CD, TUNER (BAND) or TAPE (1 2) button to select the desired function.
To select the timer playback source:
Press CD, TUNER (BAND) or TAPE (1 2).
To select the timer recording source:
Press TUNER (BAND).
When you select the TUNER (BAND), tune into the desired
station.
Do not turn the volume up too high.
4
Press the TIMER/SLEEP button repeatedly to select timer
playback or timer recording.
Display the white " " for timer playback and the red " " for
timer recording.
White
Red
25
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
CD-E800W
Press the TUNING/TIME ( or ) button to specify the hour
to start, then press the MEMORY/SET button.
The illustrations show the timer playback setting.
6
Press the TUNING/TIME ( or ) button to specify the minutes, then press the MEMORY/SET button.
To reset or change the timer setting:
Perform "Timer playback or timer recording" from the beginning.
Note:
When performing timer playback or recording using another unit
connected to the VIDEO/AUX IN sockets, select "VIDEO/AUX" in
step 2.
At this time, only this unit will be turned on or enter the power standby mode automatically. It will enter the power stand-by mode when
the end of the recording tape is reached in timer recording or 1 hour
after the playback starts in timer playback. However, another unit
will not be turned on or off.
Advanced Features
5
The unit will enter the timer stand-by mode automatically.
To cancel the timer playback/timer recording:
Press the ON/STAND-BY button to turn the power on.
7
When the preset time is reached, playback or recording will
start.
The volume will increase gradually until it reaches the volume
you were listening to before your system entered the timer
stand-by mode.
In timer playback:
If you select CD or TAPE, the unit will enter the stand-by mode
after the playback. If you select TUNER, it will enter the standby mode one hour after the timer playback starts.
In timer recording:
When the recording tape reaches its end, the timer recording
will end, and the unit will enter the stand-by mode.
26
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
9
CD-E800W
Timer and sleep operation (continued)
! Sleep operation
1
2
Play back the desired sound source.
Press the TIMER/SLEEP button repeatedly until "SLEEP" is
displayed.
! To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
Advanced Features
1
2
To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME (
or ) button.
(Maximum: 3 hours - Minimum: 1 minute)
" 3 hours - 5 minutes 5-minute intervals
" 5 minutes - 1 minute 1-minute intervals
3
4
Press the MEMORY/SET button.
Your system will enter the power stand-by mode automatically after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
Set the sleep time (see left, steps 1 - 3).
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 25 - 26).
Sleep timer setting
Timer playback setting
1 minute - 3 hours
Sleep operation will
automatically stop.
Timer playback
start time
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
27
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
Enhancing your system
CD-E800W
The connection lead is not included. Purchase a commercially available lead as shown below.
VCR, DVD, etc.
To the line
output sockets
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE (TAPE-2
4
Press the
5
Play the VCR, DVD, etc.
(
) or
[(TAPE-2)
) button.
] button.
Red
! Headphones
Red White
RCA lead
(not supplied)
" Before plugging in or unplugging the headphones, reduce the
volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control.
! Listening to the playback sounds from VCR,
DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
3
4
Press the ON/STAND-BY button to turn the power on.
Advanced Features
White
! To record on a tape
Press the VIDEO/AUX button.
Play the connected equipment.
Note:
To prevent noise interference, place this unit away from a television.
28
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
9
CD-E800W
Troubleshooting chart
Many potential problems can be resolved by the owner without calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
References
! General
Symptom
Possible cause
" The clock is not set to the " Did a power failure occur? Reset
correct time.
the clock. (Refer to page 12.)
" When a button is pressed, " Set this unit to the power standthe unit does not respond.
by mode and then turn it back on.
" If the unit still malfunctions, reset
it. (Refer to page 30.)
" No sound is heard.
" Is the volume level set to "0"?
" Are the headphones connected?
" Are the speaker wires disconnected?
" Is the karaoke mode set to "LCH", "R-CH" or "V-CANCEL"?
! CD player
Symptom
Possible cause
" Playback does not start.
" Is the disc loaded upside down?
" Playback stops in the mid- " Does the disc satisfy the standle or is not performed
dards?
properly.
" Is the disc distorted or
scratched?
" Playback sounds are
" Is the unit located near excessive
skipped, or stopped in the
vibrations?
middle of a track.
" Is the disc very dirty?
" Has condensation formed inside
the unit?
! Tuner
Symptom
" The radio makes unusual
noises continuously.
Possible cause
" Is the unit placed near the TV or
computer?
" Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
! Cassette deck
Symptom
" Cannot record.
Possible cause
" Is the erase-prevention tab removed?
" Cannot record tracks with " Is it a normal tape? (You cannot
proper sound quality.
record on a metal or CrO tape.)
" Cannot erase completely.
" Sound skipping.
" Is there any slack?
" Cannot hear treble.
" Sound fluctuation.
" Cannot remove the tape.
" Is the tape stretched?
" Are the capstans, pinch rollers,
or heads dirty?
" If a power failure occurs during
playback, the heads remain engaged with the tape. Do not open
the compartment with great
force.
29
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
CD-E800W
! Karaoke
Symptom
" The vocal part of a multiplexed disc is not heard.
! Clearing all the memory (reset)
Possible cause
" Is the karaoke mode set to "LCH", "R-CH" or "V-CANCEL"?
1
2
Press the ON/STAND-BY button to enter the power stand-by
mode.
Whilst pressing down the button and the X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears.
! Remote control
Possible cause
" Is the AC power lead of the unit
plugged in?
" Is the battery polarity correct?
" Are the batteries dead?
" Is the distance or angle incorrect?
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
" Does the remote control sensor
receive strong light?
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
! If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
! Condensation
References
Symptom
" The remote control does
not operate.
! Before transporting the unit
1
2
3
4
5
Press the ON/STAND-BY button to turn the power on.
Press the CD button.
Press the OPEN/CLOSE button to open the disc tray.
Remove all CDs inserted in the unit.
Press the OPEN/CLOSE button to close the disc tray.
Make sure that "NO DISC" is displayed.
Press the ON/STAND-BY button to enter the stand-by mode,
and then unplug the AC power lead from the wall socket.
30
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
10
CD-E800W
Maintenance
Specifications
! Cleaning the tape-handling parts
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
" Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
" When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
A
TAPE 1
C
B D
E
B
B
C
C
! General
Power source
Power
consumption
Dimensions
References
TAPE 2
Weight
Playback head
Capstan
Pinch roller
Erase head
Recording/Playback head
" After long use, the deck's heads and capstans may become magnetised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
Width: 270 mm (10-5/8")
Height: 330 mm (13")
Depth: 355 mm (13-15/16")
8.8 kg (19.4 lbs.)
! Amplifier
Output power
Output terminals
! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
AC 110/127/220/230 - 240 V, 50/60 Hz
140 W
Input terminals
Caution:
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunctions.
MPO: 620 W (310 W + 310 W) (10 % T.H.D.)
RMS: 340 W (170 W + 170 W) (10 % T.H.D.)
RMS: 280 W (140 W + 140 W) (0.9 %
T.H.D.)
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
Microphone: 1 mV/600 ohms
31
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
CD-E800W
! CD player
D/A converter
Frequency
response
Dynamic range
3-disc multi-play compact disc player
Non-contact, 3-beam semiconductor laser
pickup
1-bit D/A converter
20 - 20,000 Hz
Type
90 dB (1 kHz)
Maximum input
power
Rated input power
Impedance
Dimensions
! Tuner
Frequency range
FM: 88 - 108 MHz
AM: 531 - 1,602 kHz
! Cassette deck
Frequency
response
Signal/noise ratio
Wow and flutter
Weight
3-way 4-speaker system with passive radiator
Super tweeter 2
5 cm (2") tweeter
16 cm (6-1/2") woofer
16 cm (6-1/2") passive radiator
340 W
170 W
6 ohms
Width: 277 mm (10-7/8")
Height: 330 mm (13")
Depth: 273 mm (10-3/4")
5.1 kg (11.2 lbs.)/each
50 - 14,000 Hz (normal tape)
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
0.3 % (WRMS)
References
Type
Signal readout
! Speaker
32
03/8/27
CD-E800W(A)3.fm
TINSE0908AWZZ
10
MEMO
03/8/27
CD-E800W(A)MEMO.fm
TINSE0908AWZZ
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in materials and manufacture for a period of twelve (12) months
from the date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories, defects or injuries caused by or resulting from causes not
attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused
by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermin
infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and
remedies under any relevant legislation in the country of sale.
0212A
03/8/27
CD-E800W(A)WA.fm
TINSE0908AWZZ
IMPORTANT
DO NOT RETURN THIS PAGE TO SHARP
For your reference, please enter the particulars of your purchase below and retain, with your purchase
documentation.
Model No.
Serial No.
Date of Purchase
Retailer
FOR LOCATION ENQUIRIES WITHIN
FOR PRODUCTS PURCHASED IN
AUSTRALIA
NEW ZEALAND
REGARDING YOUR
LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.au
OR CALL SHARP
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
SHARP CUSTOMER SERVICES
TELEPHONE: 09 - 573 0111
FACSIMILE: 09 - 573 0113
WEB: www.sharpnz.co.nz
LOCAL CALL
1 300 135 022
SHARP CORPORATION OF NEW ZEALAND LIMITED
59 Hugo Johnston Drive, Penrose Auckland
SHARP CORPORATION OF AUSTRALIA PTY. LIMITED
A.B.N. 40 003 039 405
1 Huntingwood Drive Blacktown NSW 2148
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
SHARP CORPORATION
03/8/27
9906
CD-E800W(A)BA.fm
0212B
TINSE0908AWZZ
03J R HK 1
TINSE0908AWZZ