Avenview W-HDM3D5G-20M-KIT Specifications

Wireless 5G HDMI Transmitter, Receiver & 4 Port Switch
With 1080p and 3D compatible
MODEL #: W-HDM3D5G-20M-KIT
© 2012 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no
representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the
right to make changes to specifications and product descriptions at any time without notice. No license, whether express, implied,
or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and
Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products of Avenview Inc. is strictly prohibited.
www.avenview.com
Page|1
TABLE OF CONTENTS
SECTION 1: GETTING STARTED........................................................................................................ 3
1.1
IMPORTANT SAFEGUARDS ................................................................................................ 3
1.1
SAFETY INSTRUCTIONS ..................................................................................................... 3
1.3
REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) .......... 4
2.
INTRODUCTION ................................................................................................................. 5
2.1
PACKAGE CONTENTS ........................................................................................................ 5
2.2
BEFORE INSTALLATION ..................................................................................................... 6
2.3
APPLICATION DIAGRAM .................................................................................................... 7
3.
PANEL DESCRIPTION ......................................................................................................... 8
4.
INSTALLATION FULL PACKAGE (W-HDM3D5G-20M) .................................................... 9
5.
INSTALLATION FULL PACKAGE (W-HDM3D5G-20M-KIT) .......................................... 10
6.
OPERATION (W-HDM3D5G-20M-KIT) ............................................................................ 10
7.
IR REMOTE FUNCTIONS (W-HDM3D5G-20M-KIT) ....................................................... 11
8.
ADD OR DELETE TRANSMITTER ..................................................................................... 12
9.
GENERAL TROUBLESHOOTING ..................................................................................... 13
www.avenview.com
Page|2
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover











1.1
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification,
or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
SAFETY INSTRUCTIONS
The Avenview W-HDM3D5G-20M-KIT, Wireless Extender has been tested for conformity to safety regulations
and requirements, and has been certified for international use. However, like all electronic equipment’s, the
W-HDM3D5G-20M-KIT should be used with care. Read the following safety instructions to protect yourself from
possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage or
other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the
housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning .
www.avenview.com
Page|3
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols
Description
ONLY USE THE PROVIDED POWER CABLE OR
POWER ADAPTER SUPPLIED. DO NOT TAMPER
WITH THE ELECTRICAL PARTS. THIS MAY
RESULT IN ELECTRICAL SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO
WILL VOID THE WARRANTY AND CONTINUED
USE OF THE PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO
STATIC. PLEASE ENSURE IF RACK MOUNTED OR
INSTALLED ON A SURFACE, IT SHOULD BE IN A
GROUNDED ENVIROMENT.
www.avenview.com
Page|4
2. INTRODUCTION
W-HDM3D5G-20M-KIT, wireless extender and 4 Port Multi Input Switch set runs at 5GHz operation frequency
to deliver uncompressed HD video/audio 20 meters in open field. This device kit make wireless connection by using
WHDI Technology from HD media Source Devices such as HD Disc player, PC, Game Console, Set-to –Box to any
display Device for example LCD Plasma or LED TV and projector while keeping wire –equivalent quality and no
latency.
-
2.1
WHDI Technology no latency
Extends HDMI or DVI signals up to 20M (open Space) or 12M (indoor)”
Supports HDMI, EDID 1.1, Support HDCP 2.0
Supports resolution up to 3D supported HDTV / 1080Pp/60Hz, Vesa (1920 x 1080)
Real time compression audio is embedded within the HDMI output stream
Suitable for use with Home Cinema and Computer Equipment
Extends IR and CEC Signals for remote control of AV Equipment
Supporting the point to point transmission function currently which can be expanded to the
multi-point to point transmission function.
Multi Input Switch to accommodate 4 Sources into the Transmitter
PACKAGE CONTENTS
Before you start the installation of W-HDM3D5G-20M-KIT, please check the B. FULL package contents.
1
-
Wireless Transmitter
Wireless Receiver
4 Port Switch Adapter
x1
x1
x1
2
-
Power Adapter (5VDC)
x2
3
-
Remote Control
x1
www.avenview.com
Page|5
4
5
HDMI Cable & IR Ext Cable
User’s Manual
x1
B. FULL PACKAGE (HDMI SWITCH +IR EXTENSION
1 X WIRELESS HDMI TRANSMITTER
1 X WIRELESS HDMI RECEIVER
1 X REMOTE CONTROL
2 X DC 5V POWER ADAPTER
1 X IR EXTENSION CABLE (4 X IR EYE)
1 X HDMI CABLE
1 X HDMI SWITCH
1 X USER GUIDE
2.2 BEFORE INSTALLATION




Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or
malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may
cause a fire.
Do not twist or pull by force ends of the HDMI cable. It can cause malfunction.
www.avenview.com
Page|6
2.3 APPLICATION DIAGRAM
It is ideal when your media player is located in your living room, while you want to watch your Full HD Movies on
Your LCD, Plasma or LED display device in your bedroom. You can install the Wireless HD Transmitter and Receiver
Kit and let the wireless transmission do the work via the WHDI Technology. Furthermore, you can operate the media
player with the original remote control in your bedroom.
The Wireless Extender can be used horizontal or vertical mode, depending on your requirement; however for
optimum performance is it recommended to operate in vertical mode. To use the extender in vertical mode simply
slide the foot, on the bottom edge of each unit until it creates a 90 ˚ angle with the body of the unit.


Each transmitter and receiver after pairing support only point to point operation. It
cannot support signals broadcasting by wireless.
Important before starting the insulation please ensure that all devices are powered off
www.avenview.com
Page|7
3. PANEL DESCRIPTION
INPUT PANEL (Transmitter, W-HDM3D-20M-S)
1
4
5
2
6
3
7
OUTPUT PANEL (Receiver, W-HDM3D-20M-R)
10
11
00
12
13
8
9
www.avenview.com
Page|8
INPUT PANEL (4 Port Switch- W-HDM5G-4X)
4. INSTALLATION FULL PACKAGE (W-HDM3D5G-20M)
To setup Avenview W-HDM5G-20M-KIT please follow these steps for connecting to a device:
1.
2.
3.
4.
5.
6.
Place the Transmitter with 4 port unit in close proximity to the 4 HDMI source devices.
Connect all 4 HDMI sources to the 4 HDMI IN ports of the 4Port Switch connected to the Transmitter by
using 4 standard HDMI cables.
Connect the IR Extension cable to the port on the transmitter unit.
Place the other end of the 4 IR Extension cables near the IR port on the 4 HDMI source devices.
Place the Receiver unit near your HDMI display/projector, Connect the HDMI display /projector to the
HDMI Output port of the Receiver.
Connect the power adapter (included) to the DC IN ports of the Transmitter and Receiver.
Once these steps have been completed the Extender is ready to use, simply power on all devices to begin
operation.
www.avenview.com
Page|9
5. INSTALLATION FULL PACKAGE (W-HDM3D5G-20M-KIT)
1.
2.
3.
4.
5.
6.
7.
Place the Transmitter unit in close proximity to the HDMI source device.
Connect the HDMI Switch to the Transmitter
Connect the HDMI source device to HDMI IN port of the Transmitter by using a standard HDMI cable.
Connect the IR Extension cable to the IR port on the HDMI Switch.
Place the other end of the IR Extension cable near the IR port on the HDMI source device.
Place the Receiver unit near the HDMI display/projector, Connect the HDMI display /projector to the HDMI
Output port of the Receiver.
Connect the power adapter (included) to the DC IN ports of the Transmitter and Receiver.
Once these steps have been completed the Extender is ready to use, simply power on all devices to begin
operation.
6. OPERATION (W-HDM3D5G-20M-KIT)
Once all equipment is turned on, the Extender will initiate a Wireless link successful connection of the link will be
shown by the blue
Wireless Link LED on Both the Transmitter and Receiver. Once this has been completed the
blue Link Led will be lit on both units.
Whilst the Extender is creating the video link it is normal for the HDMI display to flicker ON and OFF. With both the
wireless and video Link LED illuminated the Extender is ready to transmit video. If your HDMI source and display
devices support CEC then the source device can simply be controlled using the display remote control.
www.avenview.com
Page|10
7. IR REMOTE FUNCTIONS (W-HDM3D5G-20M-KIT)
BUTTON
MENU
EXIT
SOURCE
ADD
DELETE
OK
SHIFT
A1- A4
B1 – B4
GUEST
DESCRIPTION
Enter Setup Mode
Exit Setup Mode
Wireless Transmitter List
Searching and adding a new Wireless Transmitter
Delete a Wireless Transmitter
Enter or Confirm Function
Transmitter name character editing
Switch 4 Video Source for Local HDMI Display
Switch 4 Video Source for Wireless HDMI Transmitter
User HOT Key ,
Default as Sleep Mode function with HDMI Switch (B and C Package)
MENU/Character Selection
www.avenview.com
Page|11
8. ADD OR DELETE TRANSMITTER
1.
2.
Use the supplied remote control to search and add a new transmitter or delete a Transmitter.
First turn on your Wireless HDMI Transmitter and Receiver, Remote control point to Transmitter. Press the
remote control MENU button, HDMI Display show.
www.avenview.com
Page|12
9. GENERAL TROUBLESHOOTING
PROBLEM
POSSIBLE SOLUTION

THE WIRELESS OR VIDEO
LINK LED IS NOT LIT



THE SCREEN IS BLANK


THE IR EXTENDER DOES NOT
WORK


If the transmitter and /or Receiver are positioned horizontally
move the units to vertical position. Power cycle both extender
units (OFF 30 sec then ON).
Reduce the distance between the Transmitter and Receiver
units. Power cycle both extender units
(OFF 30 sec then ON).
Re-check all connections and verify they are in the correct
positions and verify the units are powered.
Check that the wireless and Video Link LEDs are LIT
Check the IR Extender cable is connected to the Transmitter
unit
Check that the IR EYE is visible and not being obstructed and
the transmission of IR from the remote can be sent.
Reposition the IR Flasher to another location near the IR port
of your source device
SECTION 2: SPECIFICATIONS
ITEM
UNITS
UNIT DESCRIPTION
OPERATING FREQUENCY
RF COMMUNICATION
AUDIO FORMAT
SUPPORTED
SUPPORTED RESOLUTION
& DISTANCE
HDMI CONNECTOR
ANTENNA
IMAGE DELAY
IR CMFS
MODULATION
TRANSMISSION POWER
DIMENSIONS (L X W X H)
POWER SUPPLY
DESCRIPTION
W-HDM3D5G-S-20M (Transmitter)
W-HDM3D5G-R-20M (Receiver)
W-HDM5G-4X
WIRELESS Transmitter/4 Port SW
5.1GHz to 5.9 GHz
MIMO
WIRELESS Receiver
5.1GHz to 5.9 GHz
MIMO
PCM,DTS,DOLBY DIGITAL
TV-Up to 480P,576P,720P,1080i1080p60Hz @ 20 meters (66 feet)
PC Up to 1920x1080 Pixels
4 HDMI FEMALE Plug (input)
HDMI FEMALE Plug (input)
High Performance Internal Antenna
<1ms
38KHz
OFDM
12dBm+- 2dBm
11.5” x 1.3” x .5”
AC Input 100-240V,DC Output 5V
ENVIRONMENTAL
OPERATING
TEMPERATURE
STORAGE TEMPERATURE
RELATIVE HUMIDITY
32˚ ~ 104˚F (0˚ to 40˚C)
-4˚ ~ 140˚F (-20˚ ~ 60˚C)
20~90% RH (no condensation)
www.avenview.com
Page|13
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission
of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss
of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use
of the Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve
reliability, function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or
implied warranties regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a
particular purpose, and non-infringement.
www.avenview.com
Page|14