Samsung DVD-CM500 Instruction manual

DVD-VCR
DVD-CM500
GB
Instruction Manual
EJECT
STANDBY/ON
SELECT
PHONES
REC
S.MODE
COPY
PROG
VOL
P.SCAN
www.samsungvcr.com
Downloaded From Disc-Player.com Samsung Manuals
PAL
Contents
◆ FOREWORD
GB
■
Safety Instructions ...................................................................................................................
5
■
Disc Type and Characteristics .................................................................................................
6
◆ DVD-VCR OVERVIEWS
■
Front View of the DVD-VCR ....................................................................................................
7
■
Rear View of the DVD-VCR ....................................................................................................
7
■
Infrared Remote Control ..........................................................................................................
8
■
Display Indicators ....................................................................................................................
9
■
Accessories .............................................................................................................................
9
◆ CONNECTING YOUR DVD-VCR
■
Deciding How to Connect DVD-VCR ...................................................................................... 10
■
Connecting DVD-VCR to the TV using the Coaxial Cable ...................................................... 11
■
Connecting DVD-VCR to the TV using the SCART Cable ...................................................... 11
■
Connecting DVD-VCR to a Satellite Receiver or Other Equipment ......................................... 12
■
Plug & Auto Set up .................................................................................................................. 13
■
Tuning Your Television for the DVD-VCR ............................................................................... 14
■
Deck Control Keys ................................................................................................................... 15
■
Basic TV Tuner Operations ..................................................................................................... 16
■
Inserting Batteries in the Remote Control ................................................................................ 16
■
Copying from DVD to VCR....................................................................................................... 17
■
Setting the Date and Time ....................................................................................................... 18
■
Setting the Menu Language ..................................................................................................... 18
◆ SETTING UP YOUR DVD-VCR
■
Presetting the Stations Automatically ...................................................................................... 19
■
Presetting the Stations Manually ............................................................................................. 20
■
Clearing a Preset Station ......................................................................................................... 21
■
Changing the Preset Station Table ......................................................................................... 22
■
Selecting the RF OUT Sound Mode (B/G-D/K) .............................................................................. 23
■
Setting the DVD-VCR Output Channel .................................................................................... 23
■
Selecting the Colour Mode ...................................................................................................... 24
■
NICAM ..................................................................................................................................... 24
■
Intelligent Picture Control ........................................................................................................ 25
■
ShowView Extend ................................................................................................................... 26
■
Auto Power off.......................................................................................................................... 26
■
Screen Messages .................................................................................................................... 27
■
Selecting the Cassette Type .................................................................................................... 27
■
Repeat Play.............................................................................................................................. 28
■
S-VHS Play .............................................................................................................................. 28
◆ RECORDING TELEVISION BROADCASTS
■
Selecting the Recording Speed................................................................................................ 29
■
Protecting a Recorded Cassette .............................................................................................. 30
2 Disc-Player.com Samsung Manuals
Downloaded From
Contents
■
Recording a Programme Immediately......................................................................................
30
■
Recording a Programme with Automatic Stop .........................................................................
31
■
Using the ShowView ...............................................................................................................
32
■
Modifying ShowView Programming .........................................................................................
33
■
Using the Timer Programming Feature ....................................................................................
34
■
Checking a Preset Recording ..................................................................................................
35
■
Cancelling a Preset Recording.................................................................................................
35
◆ PLAYING BACK
■
Playing a Cassette ...................................................................................................................
36
■
Adjusting Picture Alignment Manually ......................................................................................
36
■
Selecting the Audio Output Mode ............................................................................................
37
■
Playing a Cassette in Slow Motion ..........................................................................................
37
■
Playing a Sequence at Variable Speeds ..................................................................................
38
■
Searching for a Specific Sequence ..........................................................................................
39
■
Using the Tape Counter ...........................................................................................................
41
■
Connecting an RCA Audio/Video Input Cable..........................................................................
42
■
Recoding from Another VCR or Camcorder.............................................................................
43
■
Audio Dubbing a Pre-recorded Cassette .................................................................................
44
■
Using the TV Buttons on the Remote Control ..........................................................................
45
◆ DVD FUNCTIONS
■
Choosing a Connection................................................................................................................
46
■
Setting Up the Language Features................................................................................................
47
■
Setting Up the Audio Options........................................................................................................
49
■
Setting Up the Parental Control ....................................................................................................
50
■
Setting Up the Display Options .....................................................................................................
51
■
S-Video Connections (for DVD) ....................................................................................................
51
■
Component Connections (for DVD) ...............................................................................................
52
■
Special Playback Features ...........................................................................................................
53
■
Adjusting the Aspect Ratio (EZ View) ............................................................................................
54
■
Using the Display Function (DVD/VCD/CD)....................................................................................
56
■
Changing the Camera Angle ........................................................................................................
57
■
Selecting the Subtitle Language....................................................................................................
57
■
Repeat Play................................................................................................................................
58
■
Using the Zoom (DVD/VCD).........................................................................................................
58
■
Repeat Chapter/Title ...................................................................................................................
59
■
Selecting the Audio Language ......................................................................................................
59
■
Using the Mark Function (DVD/VCD).............................................................................................
60
■
MP3-CD Playback.......................................................................................................................
61
■
WMA Play ..................................................................................................................................
62
■
MP3/WMA Play .........................................................................................................................
63
■
Program Play & Random Play ......................................................................................................
64
■
Picture CD Playback....................................................................................................................
65
Downloaded From Disc-Player.com Samsung Manuals
3
GB
Contents (cont.)
◆ APPENDIX A - ADVANCED CONNECTIONS
GB
■
Setting the Delay Time.................................................................................................................
67
■
About Speaker Setup .................................................................................................................
68
■
Sound Mode Function..................................................................................................................
70
■
Listening to the Radio ..................................................................................................................
71
■
Presetting Stations ......................................................................................................................
72
◆ SOLVING PROBLEMS
■
Technical Specifications...............................................................................................................
73
■
Problems and Solutions (VCR) .....................................................................................................
74
■
Troubleshooting Guide (DVD).......................................................................................................
75
This manuel is divided into two sections:
one describing the VCR; the other, the DVD.
Prior to undertaking anything, please verify in which section you actually are by
checking either the VCR or DVD symbols or the header of the chapter.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must by authorized by Macrovision Corporized by
Macrovision Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Symbols
1
Press/push
1 = Step number
4 Disc-Player.com Samsung Manuals
Downloaded From
1
☛
➢
Hold down
Important
Note
Safety Instructions
The following illustrations represent precautions.
GB
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
10%
75%
40°C
H
H
5°C
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or lightning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
Downloaded From Disc-Player.com Samsung Manuals
5
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos :
GB
Disc Types
(Logos)
Recording Disc Size
Types
DVD
12 Cm
Audio
+
Video
8 Cm
VIDEO-CD
12 Cm
Audio
+
Video
AUDIO-CD
Max.
Playing
Time
Characteristics
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
74 min.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
8 Cm
20 min.
12 Cm
74 min.
8 Cm
20 min.
Audio
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the
recording.
Disc Markings
PAL
• Playback
Region
Number
• PAL colour
system in U.K,
France, Germany,
etc.
NTSC
DIGITAL
SOUND
STEREO
• Stereo
• NTSC broadcast • Dolby
Digital disc
disc
system in USA,
Canada, japan,
South Korea, etc.
• Digital
Audio disc
• DTS disc
• ”DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
• Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
Playback Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6 Disc-Player.com Samsung Manuals
Downloaded From
Front View of the DVD-VCR
1
2
3
4
EJECT
STANDBY/ON
SELECT
PHONES
REC
5
6
1
2
3
4
5
6
7
8
9
7 8
S.MODE
COPY
9 10 11 12 13
DVD DECK
DVD OPEN/CLOSE
VCR DECK
VCR EJECT
STANDBY/ON
HEADPHONE JACK
STOP
REW/SKIP BACK BUTTON
PLAY/STILL
PROG
14
15
10
11
12
13
14
15
16
17
18
GB
VOL
P.SCAN
16
17
18
F.F/SKIP NEXT BUTTON
RECORD
SOUND MODE
COPY
FRONT PANEL DISPLAY
PROGRAMME /
PROGRESSIVE SCAN
SELECT DIAL
VOLUME DIAL
Rear View of the DVD-VCR
1
2
3
4
5
6
7
DVD & VCR
AUX
AUDIO
IN
RADIO ANT.
FM
75
COAXIAL
OUT
R
SPEAKERS
DVD Only
L
COMPONENT VIDEO OUT
FRONT R
FRONT L
WOOFER
AM
VIDEO
SURROUND R
SURROUND L
CENTER
S-VIDEO OUT
8
1
2
3
4
5
6
9 10
11
RF ANTENNA INPUT
RADIO FM ANTENNA INPUT
AUX AUDIO L, R IN/OUT SOCKETS
AV2 (DEC./EXT.) SCART (EURO-21) SOCKET
COOLING FAN
COMPONENT VIDEO OUT
12
7
8
9
10
11
12
Downloaded From Disc-Player.com Samsung Manuals
5.1CH SPEAKER OUT
RF OUT TO TV
RADIO AM ANTENNA INPUT
VIDEO IN/OUT SOCKETS
AV1 (EURO AV) IN/OUT SCART (EURO-21)
SOCKET
S-VIDEO OUT
7
Infrared Remote Control
GB
1
20
2
21
3
22
4
5
23
24
6
25
7
8
9
10
11
12
13
14
15
16
17
18
19
8 Disc-Player.com Samsung Manuals
Downloaded From
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
STANDBY/ON
SHUTTLE<< / >>
ANGLE/IPC
DVD SELECT
VCR SELECT
TV VOLUME
OPEN/CLOSE, EJECT
EZ VIEW
REWIND, SKIP BACK
STOP
DISC MENU
MENU
LEFT
RECORD
TEST
SPEAKER
TV/VCR
MODE, REPEAT
TITLE, SPEED
TV STANDBY/ON
0-9
ZOOM, INPUT SELECT
TV SELECT
FM/AM SELECT
AMP VOLUME
PROG/TRK ( , )
AUDIO
MUTE
FAST-FORWARD, SKIP NEXT
PLAY/STILL
CLEAR
RETURN, A.DUB
UP
OK
RIGHT
DOWN
INFO.
BASS
SOUND MODE
TREBLE
MARK, SEARCH
SUBTITLE, TIMER
Display Indicators
1
2
3
4
5
6
GB
7
8
1 The DVD Deck is active.
2 DVD or CD media is loaded.
3 The time, counter position, time remaining or current
deck status is indicated.
4 Recording is in progress (normal and timer).
5 VHS videotape is loaded.
6 The VCR Deck is active.
7 A DVD with a DTS soundtrack is loaded.
9
10
8 The Hi-Fi track of a VHS videotape is playing or
the current TV program or video is broadcast in
Stereo.
9 Timer Recording is in progress. When it blinks
an error has occurred. When recording is on, it
displays without the clock hands. It also blinks
when you pause the VCR.
10 COPY mode indicator
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
AUDIO & VIDEO CABLE
BATTERIES
Downloaded From Disc-Player.com Samsung Manuals
OWNER’S INSTRUCTIONS
AM ANTENNA CABLE
COAXIAL CABLE
FM ANTENNA CABLE
9
Deciding How to Connect DVD-VCR
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
GB
Your DVD-VCR is equipped with the following connectors.
Connector
Location
Type
Direction
Recommended Use
AV1 (EURO AV) Rear
SCART
In/Out
◆ Television
◆ Satellite receiver
◆ Other VCR
AV2 IN
Rear
SCART
In
◆ Satellite receiver
◆ Other VCR
Audio output
Rear
Audio RCA
Out
◆ Audio out
Aux
Audio/Video
In
R
◆ Audio in
Video in
Rear
RCA
Out
◆ Video out
S-JACK
Out
◆ S-Video out (DVD only)
75 Ω
Out
◆ Television
OUT
R
L
AUX
Rear
OUT
VIDEO output
EO
S-VIDEO
output
Rear
S-VIDEO OUT
OUT TO TV
Rear
coaxial
IN FROM ANT. Rear
75 Ω
In
◆ Cable television network
◆ Satellite receiver
coaxial
FM/AM Antenna Rear
Input
RADIO ANT.
75 Ω
coaxial
◆ Aerial
In
◆ FM Antenna
FM
75
COAXIAL
AM
☛
◆ AM Antenna
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
10 Disc-Player.com Samsung Manuals
Downloaded From
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
◆
◆
◆
◆
☛
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
DVD & VCR
AUX
AUDIO
IN
FM
75
COAXIAL
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75Ω coaxial socket marked
the rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the
DVD-VCR.
TV
AM
VIDEO
on
socket on your
TV
DVD & VCR
AUX
AUDIO
IN
RADIO ANT.
FM
75
COAXIAL
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
OUT
R
L
AM
VIDEO
4
5
GB
L
2
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1
4
OUT
R
RADIO ANT.
3
To obtain better pictures and sound quality on your television,
you can also connect your DVD-VCR to the television via the
SCART cable (see section below) if your television is equipped
with this type of connection.
Connecting DVD-VCR to the TV using the SCART Cable
Aerial
TV
DVD & VCR
AUX
AUDIO
IN
RADIO ANT.
FM
75
COAXIAL
OUT
R
L
2
AM
3
VIDEO
SCART Cable
RF coaxial cable
You can connect your DVD-VCR to the television using the SCART cable if the appropriate input is available
on the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
☛
◆ Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched
off.
◆ Make sure that both the television and the DVD-VCR are switched off before connecting the
cables.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the SCART cable to the AV1 (EURO AV) socket on the rear of the DVD-VCR.
3
Plug the other end into the appropriate connector on the television.
Downloaded From Disc-Player.com Samsung Manuals
11
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the
appropriate outputs are available on the equipment chosen. The following illustrations give a few
examples of the connection possibilities.
1. AV1(EURO AV): By means of 21-pin Scart Cable
GB
Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV1 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Aerial
Satellite Receiver or other Equipment
Aerial Connector
2
TV
DVD & VCR
1
AUX
AUDIO
IN
OUT
R
RADIO ANT.
SCART Cable
FM
75
COAXIAL
L
AM
VIDEO
RF coaxial cable
1. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of
the DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Aerial
Satellite Receiver or other Equipment
Aerial Connector
2
1
DVD & VCR
TV
AUX
AUDIO
IN
RADIO ANT.
FM
75
COAXIAL
OUT
R
L
AM
VIDEO
SCART Cable
RF coaxial cable
12 Disc-Player.com Samsung Manuals
Downloaded From
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
TV
DVD & VCR
AUX
AUDIO
IN
OUT
R
RADIO ANT.
FM
75
COAXIAL
1
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result:
The Language Set menu is displayed.
3
Select the required language by pressing the
4
Press OK to store the language selected.
Result:
A message appears.
5
Press OK button.
6
Press the or ❷ buttons to select your country.
☛ The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
7
GB
L
AM
VIDEO
or ❷ buttons.
2
Press OK to start the auto scanning.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
◆
8
The current time and date are displayed automatically.
Check the date and time.
if it is :
◆ Correct, Press RETURN button twice to exit the menu.
◆ incorrect, see page 18.
➢
Auto setup
Auto preset can be performed by pressing STOP ( ■ ) on
the VCR continuously for 5 seconds or more with no
tape inserted.
Please wait
00 %
Clock Set
Time
12 : 00
Auto Clock
Downloaded From Disc-Player.com Samsung Manuals
Date
Year
1 / JAN / 2004 THU
: On
13
Tuning Your Television for the DVD-VCR
You must tune your television for the DVD-VCR only if you are
not using a Scart cable
➢
GB
To view pictures from your DVD-VCR when a Scart
cable is used, the television must be set to the
audio/video mode (AV).
2
4
14 Disc-Player.com Samsung Manuals
Downloaded From
1
Switch on the television.
2
Switch on the DVD-VCR by pressing STANDBY/ON on the front
of the DVD-VCR or STANDBY/ON on the remote control.
3
Select a programme position on the television to be reserved for
use with your DVD-VCR.
4
Insert the video cassette in the DVD-VCR. Check that the
DVD-VCR starts reading the cassette; if not, press ❿II button.
5
Start a scan on your television or set the television to UHF
channel 36.
6
Fine tune the television until the pictures and sound are obtained
clearly.
7
If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 23 and Problems and Solutions on
page 75).
8
When the picture and sound are perfectly clear, store this
channel at the desired programme position on the television.
Result:
That programme is now reserved for use with your
DVD-VCR.
Deck Control Keys
The DVD-VCR uses one set of controls to operate both decks.
The following keys are helpful in successfully controlling each
deck.
1
2
DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to
show that the DVD deck is selected.
3
VCR Button
Press the VCR button on remote control when you want to
control the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to
show that VHS deck is selected.
4
GB
STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
STANDBY/ON
PHONES
1
1
4
2
3
INPUT SEL. BUTTON
Press the INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (PR##), AV1 (rear AV
input), AV2 (rear AV input), AUX (rear AV input).
◆ It is only available when VCR deck is selected.
➢
Before using the VCR operation of 19~45 pages, press
the VCR button on the remote control to select VCR
mode.
Before using the DVD operation of 46~66 pages, press
the DVD button on the remote control to select and
watch DVD.
Downloaded From Disc-Player.com Samsung Manuals
15
Basic TV Tuner Operations
4
GB
1
2
The following buttons are used when watching television via the
DVD-VCR’s built-in TV tuner.
1
TV/VCR Button
Press to switch between your TV’s tuner and the VCR’s internal
tuner.
2
PROG
Button
Press to change to the next or previous channel.
3
0-9 Buttons
Press to select channels directly.
4
INFO.
Press to display the channel you are watching.
◆ Also works in DVD and VCR mode.
2
3
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control
when you:
◆ Purchase the DVD-VCR
1
◆ Find that the remote control is no longer working
correctly
1
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AAA, RO3 or equivalent batteries, taking care to
respect the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢
16 Disc-Player.com Samsung Manuals
Downloaded From
Do not mix different battery types (manganese and
alkaline for example).
Copying from DVD to VCR
The DVD-VCR allows you to copy the contents of a DVD to a
VHS tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1
INSERT DISC
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2
Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
EJECT
STANDBY/ON
SELECT
PHONES
REC
PROG
EJECT
SELECT
S.MODE
COPY
PROG
Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆ The DVD will go into Play mode and the VCR will go into
Record mode.
Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆ You must stop the Copy process manually when the DVD
movie ends or the DVD may replay and record over and over
again.
☛
VOL
P.SCAN
PHONES
REC
4
COPY
1
STANDBY/ON
3
S.MODE
VOL
P.SCAN
2
ON
PHONES
REC
S.MODE
COPY
3
The NTSC DVD or VCD Copy process can not active.
4
4
Downloaded From Disc-Player.com Samsung Manuals
17
GB
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
GB
Language
You must set the date and time when:
◆ You purchase the DVD-VCR
: English
Install
User Set
Auto Power Off
Screen Messages
☛
: Off
: On
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or ❿ to select this option.
Result:
The Clock Set menu is displayed.
4
Press ➛ or ❿ to select the hour, minutes, day, month and year,
Auto Clock.
Result:
The option selected highlight.
5
Press the or ❷ buttons to increase or decrease the value.
Result:
The day of the week is displayed automatically.
Clock Set
Time
12 : 00
Date
Year
1 / JAN / 2004 THU
Auto Clock
Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
: On
➢
6
, ❷ buttons to select the Clock
You can hold the or ❷ buttons down to scroll more
quickly through the values.
On completion, press RETURN three times to exit the menu.
Setting the Menu Language
Language
: English
1
Open “MENU”
After pressing the MENU, press the OK or ❿ .
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
2
Select “Language”
Use the or ❷ buttons to highlight
“Language,” then press the OK or ❿ .
3
Set menu Language
Place the selection arrow next to your desired Language, then
press the OK button.
Language Set
English
Français
Deutsch
Español
Italiano
Nederlands
18 Disc-Player.com Samsung Manuals
Downloaded From
4
On completion, press RETURN twice to exit the menu.
VCR
Presetting the Stations Automatically
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ Plug & Auto Set up (see page 13)
◆ Automatically
◆ Manually (see page 20)
You can store up to 80 stations.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
Language
: English
GB
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
Install
3
4
, ❷ buttons to select the Install
Press the OK or ❿ to select this option.
Result:
The Install menu is displayed.
Press the corresponding
Auto Setup
Manual Setup
TV System
VCR Output CH
: K
: CH 36
or ❷ buttons, until the Auto
Setup is selected.
And then press the OK or ❿ to select this option.
The country selection is displayed.
Result:
5
Press the or ❷ buttons to select your country.
☛ The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
6
Press OK button.
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
7
Press OK to start the auto scanning.
Result:
◆ The Please Wait indication highlight on the
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The DVD-VCR then searches for the second station
and so on.
◆ When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢
8
Auto Setup
Your data will be lost
Press OK to continue
Menu to exit
Auto Setup
Please Wait
15%
The number of stations automatically stored by the DVDVCR depends on the number of stations that it has found.
If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
➢
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 21).
Downloaded From Disc-Player.com Samsung Manuals
19
VCR
Presetting the Stations Manually
☛
Language
: English
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or ❿ to select this option.
Result:
The Install menu is displayed.
4
Press the corresponding
Setup option is selected.
5
Press the OK or ❿ to select a Manual Setup option.
Result:
The TV STATION TABLE menu is displayed.
6
Press the
required.
7
Press the ❿ button to preset the station.
Result:
The MANUAL TUNING menu is displayed.
8
Press the ➛ or ❿ buttons to start scanning channel.
Result:
The frequency band is scanned and the first station
found is displayed.
9
Press the ❷ button, until the DECODER is selected.
10
Press the ❿ button to activate or deactivate use of the decoder
for the TV station, if necessary.
11
Press the or ❷ buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
12
To change the programme’s name, press the ❿ button.
The first letter of the name flashes.
Result:
13
To...
Then...
Select a character
in the name
Press the or ❷ button until the
required character is displayed
(letters, numbers or “-” character).
Move to the next or
previous character
Press the ➛ or ❿ buttons
respectively.
Install
GB
User Set
Auto Power Off
Screen Messages
: Off
: On
Install
Auto Setup
Manual Setup
TV System
VCR Output CH
: K
: CH 36
TV STATION TABLE
PR
CH
NAME
DEC
1
2
3
4
5
SWAPPING : OK
RETURN
DELETE : CLEAR
MANUAL TUNING
PR
:
CH
: ---
MFT
: -
DECODER
: OFF
NAME
: ----
You do not need to preset the stations manually if you
have already set them automatically.
14
or
❷
buttons, until the Manual
or ❷ buttons to select a programme number as
If you...
Then...
Wish to store the
station displayed
◆
◆
MEMORY : OK
RETURN
◆
Do not wish to
store the station
displayed
◆
◆
◆
20 Disc-Player.com Samsung Manuals
Downloaded From
, ❷ buttons to select the Install
Press the or ❷ buttons until the MFT
is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station
Press the or ❷ buttons until the CH
is selected.
Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step 9
15
Repeat this procedure from Step 9 onwards, until all the required
stations have been stored.
16
On completion, press the RETURN button three times to exit the
menu.
VCR
Clearing a Preset Station
If you have stored a TV station:
◆ That you do not require
Language
◆ At the wrong programme position
Install
you can cancel it.
User Set
Auto Power Off
Screen Messages
1
After pressing the MENU, press the OK or ❿ .
The Setup menu is displayed.
Result:
2
Press the corresponding
option.
3
Press the OK or ❿ to select this option.
Result:
The Install menu is displayed.
GB
: Off
: On
, ❷ buttons to select the Install
4
Press the corresponding
Setup option is selected.
5
Press the OK or ❿ to select a Manual Setup option.
Result:
The TV STATION TABLE menu is displayed.
6
Press the corresponding
or ❷ buttons, until the required
preset TV station (PR) is selected.
7
Press the CLEAR button.
8
: English
or
❷
Install
Auto Setup
Manual Setup
TV System
VCR Output CH
buttons, until the Manual
: K
: CH 36
TV STATION TABLE
Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
PR
CH
NAME
DEC
1
021
----
OFF
2
3
4
9
On completion, press the RETURN button four times to exit the
menu.
5
DELETE : CLEAR
Downloaded From Disc-Player.com Samsung Manuals
SWAPPING : OK
RETURN
21
VCR
Changing the Preset Station Table
Language
GB
You can rearrange the Station Table and give different
programme numbers to the stations listed according to your own
preferences.
: English
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or ❿ buttons to select this option.
The Install menu is displayed.
Result:
Install
Auto Setup
4
Manual Setup
TV System
VCR Output CH
TV STATION TABLE
CH
NAME
DEC
1
021
----
OFF
2
3
5
Press the OK or ❿ button to select this option.
The TV STATION TABLE menu is displayed.
Result:
6
Press the corresponding
or ❷ buttons, until the required
preset TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
7
To change the programme number assigned to a station press
the OK button on the remote control. (For example, To move a
TV station in programme 1 to programme 3)
8
Press the or ❷ buttons to select required position.
And then press OK again to swap the position.
9
On completion, press the RETURN button four times to exit the
menu.
4
5
DELETE : CLEAR
SWAPPING : OK
RETURN
TV STATION TABLE
PR
CH
NAME
DEC
021
----
OFF
1
2
3
4
5
DELETE : CLEAR
SWAPPING : OK
RETURN
22 Disc-Player.com Samsung Manuals
Downloaded From
or ❷ buttons, until the Manual
Setup option is selected.
: K
: CH 36
PR
Press the corresponding
, ❷ buttons to select the Install
VCR
Selecting the RF OUT Sound Mode (B/G-D/K)
You can choose the sound mode (B/G or D/K) according to the
TV set connected to your VCR.
1
After pressing the MENU, press the OK or ❿.
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or ❿ to select this option.
Result:
The Install menu is displayed.
4
Press the
selected.
or
❷
Language
Install
User Set
Auto Power Off
Screen Messages
buttons, until the TV System option is
Press the OK or ❿ buttons to select G or K.
6
On completion, press RETURN three times to exit the menu.
Install
Auto Setup
Manual Setup
TV System
VCR Output CH
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or ❿ to select this option.
Result:
The Install menu is displayed.
4
Press the or ❷ buttons, until the VCR Output CH option
is selected.
6
G
Language
: English
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
, ❷ buttons to select the Install
Select the required output channel (CH21~CH69) by pressing
the OK or ❿ buttons.
CH21
K
: K
: CH 36
VCR
Setting the DVD-VCR Output Channel
5
GB
: Off
: On
, ❷ buttons to select the Install
5
1
: English
. . CH36
Clock Set
Install
Auto Setup
Manual Setup
TV System
VCR Output CH
CH 21
:
CH 36
:
CH 69
: K
: CH 36
. . CH69
On completion, press RETURN three times to exit the menu.
Then tune your television again (see page 14).
Downloaded From Disc-Player.com Samsung Manuals
23
VCR
Selecting the Colour Mode
Language
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception
standard when you select AUTO.
: English
➢
Install
GB
User Set
Auto Power Off
Screen Messages
: Off
: On
◆
User Set
Colour System
: Auto
NICAM
IPC
ShowView Extend
: On
: On
: Off
◆
Auto
PAL
MESECAM
B/W
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVDVCR make a setting on the colour system according to
your TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
User Set option.
3
Press the OK or ❿ to select this option.
Result:
The User Set menu is displayed.
4
, ❷ buttons to select the
Press the corresponding
or
❷
buttons, until the Colour
System option is selected.
5
Press the OK or ❿ button to select Auto➝PAL➝MESECAM➝B/W.
Auto When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W
6
VCR
Black and White
On completion, press RETURN three time to exit the menu.
NICAM
Language
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard
mono sound broadcast and you can select the desired sound.
Please refer to page 37.
: English
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding , ❷ buttons to select the
User Set option.
Press the OK or ❿ to select this option.
Result:
The User Set menu is displayed.
3
User Set
Colour System
: Auto
NICAM
IPC
ShowView Extend
: On
: On
: Off
On
Off
4
Press the corresponding
options selected.
5
To...
Press OK or ❿, until...
Mono mode
Off is displayed.
Off: Only set at this position to record
the standard mono sound during a
NICAM broadcast if the stereo sound is
distorted due to inferior reception
conditions.
NICAM mode
On is displayed.
or
❷
buttons, until the NICAM
On: Normally set at this position.
24 Disc-Player.com Samsung Manuals
Downloaded From
6
On completion, press RETURN three times to exit the menu.
VCR
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
Language
1
During playback, press the MENU button on the remote control.
2
Press the OK or ❿ .
Result:
The Setup menu is displayed.
3
Press the corresponding
User Set option.
4
Press the OK or ❿ buttons to select this option.
Result:
The User Set menu is displayed.
5
Press the corresponding
selected.
6
Install
User Set
Auto Power Off
Screen Messages
or ❷ buttons, until the IPC option is
User Set
When intelligent picture control mode is On , the
sharpness of the image is adjusted automatically.
7
To adjust the sharpness manually, press the
the IPC mode Off.
8
Press the ➛ or ❿ buttons until the picture is displayed according
to your preferences.
➢
GB
: Off
: On
, ❷ buttons to select the
Press the OK or ❿ button to select IPC (Intelligent Picture
Control) option.
➢
9
: English
❷
Colour System
: Auto
NICAM
IPC
ShowView Extend
: On
: On
: Off
On
Off
button to turn
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
On completion, press the RETURN button.
➢
You can also directly Select function suing IPC button
on the remote control.
Downloaded From Disc-Player.com Samsung Manuals
25
VCR
ShowView Extend
Language
To prevent delays or over-runs, the VCR has a function called
ShowView Extend allowing you to extend the recording time by
up to 60 minutes.
: English
➢
Install
GB
User Set
Auto Power Off
Screen Messages
: Off
: On
User Set
Colour System
: Auto
NICAM
IPC
ShowView Extend
: On
: On
: Off
VCR
Off
10
20
30
40
50
60
Only use if PDC is not available or set to Off.
1
After pressing the MENU, press the OK or ❿ .
2
Press the corresponding
option.
3
Press the OK or ❿ buttons to select this option.
Result:
The User Set menu is displayed.
4
Press the corresponding or ❷ buttons, until the
ShowView Extend option is selected.
5
Press the OK or ❿ buttons to set the ShowView Extend time
by increments of 10 minutes.
6
To turn off, press OK or ❿ buttons repeatedly until Off shows.
, ❷ buttons to select the User Set
Auto Power Off
Language
The Auto Power Off feature automatically turns off your DVDVCR if no signal is received and you do not press any button for
the selected time.
: English
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
or
Power Off option is selected.
3
Press the OK or ❿ buttons, until you select the time of Auto
Power Off interval.
Off
Language
buttons, until the Auto
2Hour
3Hour
: English
4
Install
User Set
Auto Power Off
Screen Messages
1Hour
❷
: Off
: On
Off
1Hour
2Hour
3Hour
26 Disc-Player.com Samsung Manuals
Downloaded From
On completion, press RETURN twice to exit the menu.
VCR
Screen Messages
Your DVD-VCR displays most information on both the DVD-VCR
and the television.
You can choose to display or hide this information on the
television screen (except for the SEARCH, Programming MENU
and Timer functions, which cannot be hidden).
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
or ❷ buttons, until the Screen
Messages option is selected.
3
To...
Press OK or ❿, until...
Display on-screen information
On is displayed.
Hide on-screen information
Off is displayed.
4
Language
: English
GB
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
On
Off
On completion, press RETURN twice to exit the menu.
VCR
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining
on a cassette, you must indicate the type of cassette inserted.
Language
1
After pressing the MENU press the corresponding
buttons to select the VCR option.
,❷
2
Press the OK or ❿ buttons to select this option.
Result:
The VCR Setup menu is displayed.
3
Press the corresponding
Select option is selected.
4
Press the OK or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180
E 300
5
or
❷
: English
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
buttons, until the Tape
E240
E260
VCR Setup
Tape Select
: E180
Repeat Play
S-VHS
: Off
: Off
E180
E240
E260
E300
Press RETURN twice to exit the menu.
Downloaded From Disc-Player.com Samsung Manuals
27
VCR
Repeat Play
You can set repeat play to repeat the tape continuously from
beginning to end.
Language
GB
: English
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
1
After pressing the MENU, press the corresponding
buttons to select the VCR option.
2
Press the OK or ❿ buttons to select this option.
Result:
The VCR Setup menu is displayed.
3
Press the corresponding
or
❷
,❷
buttons, until the Repeat
Play option is selected.
4
VCR Setup
Tape Select
: E180
Repeat Play
S-VHS
: Off
: Off
Off
On
5
VCR
To...
Press OK or ❿, until...
Repeat play
On is displayed.
Do not wish to repeat play
Off is displayed.
On completion, press RETURN twice to exit the menu.
S-VHS Play
The DVD-VCR allows you to playback high quality S-VHS tapes.
Language
: English
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
VCR Setup
Tape Select
: E180
Repeat Play
S-VHS
: Off
: Off
1
During S-VHS play mode, press the MENU.
2
Press the corresponding
3
Press the OK or ❿ buttons to select this option.
The VCR Setup menu is displayed.
Result:
4
Press the corresponding
option is selected.
5
To...
Press OK or ❿, until...
S-VHS play
On is displayed.
Do not wish to S-VHS play
Off is displayed.
Off
On
6
28 Disc-Player.com Samsung Manuals
Downloaded From
, ❷ buttons to select the VCR option.
or ❷ buttons, until the S-VHS
On completion, press RETURN twice to exit the menu.
To watch S-VHS tapes, set the S-VHS mode to On in the VCR
Setup.
VCR
Selecting the Recording Speed
You can record a cassette at two different speeds:
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette...
Press the SPEED button on the
remote control, until...
In standard play mode
In long play mode
SP is displayed.
LP is displayed.
Downloaded From Disc-Player.com Samsung Manuals
Type
Recording Time (in SP)
E-180
180 mins. or 3 hours
E-240
240 mins. or 4 hours
E-260
260 mins. or
4 hours and 20 mins.
E-300
300 mins. or 5 hours
GB
29
VCR
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2
To re-record over a protected cassette (safety tab broken),
cover the hole with adhesive tape.
GB
1
VCR
Recording a Programme Immediately
Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
4
4
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
4
Select:
◆
The station to be recorded using the PROG (
or
6
or ) buttons
The AV1, AV2 or AUX source using the INPUT SEL. button
for a satellite tuner or external video source
The station number is displayed and the programme
Result:
can be seen on the television.
◆
5
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
6
Hold REC ( ●) down for a while to start recording.
The record indicator appears on the television and
Result:
DVD-VCR display. An index is recorded on the tape
(see page 39).
7
To stop recording, press ■ once.
7
➢
30 Disc-Player.com Samsung Manuals
Downloaded From
◆ If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
◆ If you reach the end of the tape while recording,
the cassette rewinds automatically.
VCR
Recording a Programme with Automatic Stop
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
EJECT
STANDBY/ON
SELECT
PHONES
REC
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
The DVD-VCR is switched on automatically.
Result:
4
Select:
◆
The station to be recorded using the PROG (
or
S.MODE
COPY
PROG
GB
VOL
P.SCAN
3
4
or ) buttons
4
The AV1, AV2 or AUX source using the INPUT SEL. button
for a satellite tuner or external video source
Result:
The channel number is displayed and the
programme can be seen on the television.
◆
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
6
Hold the REC ( ●) button down for a while to start recording.
The record indicator appears on the television screen
Result:
and DVD-VCR display. An index is recorded on the
tape (see page 39).
7
Press the REC ( ●) button several times to increase the
recording time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours
The length is displayed on the television displays.
Result:
The selected programme is recorded for the length of
time requested. At the end of that time, the DVDVCR stops recording automatically and power off.
8
6
5
LENGTH 2:30
SET LENGTH :
PRESS REC ●
If you wish to cancel the recording before the end, press
STANDBY/ON.
☛
☛
If the end of the tape is reached while recording:
◆ The recording stops and power off.
This function is not available in DVD recording
Downloaded From Disc-Player.com Samsung Manuals
31
VCR
Using the ShowView
Before presetting your DVD-VCR:
◆ Switch on both the television and your DVD-VCR
◆ Check that the date and time are correct
GB
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
1
Up to six programmes can be preset.
1
Timer Method
Standard
ShowView
To enter a ShowView, press the TIMER button.
Press the or ❷ and OK or ❿ buttons to select ShowView
Result:
A message is displayed to allow you to enter the
ShowView code.
☛
If all six programmes have been set, the message Timer
is full is displayed. Refer to page 35 if you wish to
cancel a preset recording.
2
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
➢
VideoPlus
Code
Code
Correct
: 0-9
:
3
Press the OK button.
The information concerning the programme is
Result:
displayed.
☛
PR
Day
Start
WE 01
19 : 00
19 : 30
Stop
:
:
:
:
:
:
:
:
:
:
Speed
SP
V/P
Off
When using the ShowView function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
or ❷ buttons. Refer to the following page
if:
◆ The programme number or times flash
◆ You wish to modify the programme
4
If the programme and times are correct, press the RETURN
button.
5
Press the STANDBY/ON button to activate the timer.
6
Refer to page 35 if you wish to:
◆ Check that your DVD-VCR has been programmed correctly
◆ Cancel a preset recording
☛
5
If you wish to correct the ShowView code that you are
entering:
◆ Press the ➛ button until the digit to be corrected is
cleared
◆ Enter the correct digit
The numbers next to each TV programme listing are
ShowView code numbers, which allow you to
programme your videorecorder instantly with the
remote control. Tap in the ShowView code for the
programme you wish to record.
™ ShowView is a trademark of Gemstar Development Corporation. The ShowView system
is manufactured under licence from Gemstar Development Corporation.
32 Disc-Player.com Samsung Manuals
Downloaded From
Modifying ShowView Programming
VCR
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press RETURN a second time to confirm.
If you wish to...
Then...
Select an input source other
than the tuner (AV1, AV2 or AUX)
◆ Press the ➛ or ❿ buttons, until the PR selection flashes.
◆ Press the
Result:
GB
or ❷ button to change the input source selection.
The programme number is replaced by:
• The AV1, AV2 or AUX source using the
or ❷
button for a satellite tuner or external video source
➢
Record a programme every day
(Monday to Sunday) at the same time
The input source must be selected before changing any other
value.
◆ Press the ➛ or ❿ buttons, until the Day selection flashes.
◆ Press the
or ❷ buttons, until the DLY (Daily) value is
displayed.
Record a programme every week
on the same day and at the same time
◆ Press the ➛ or ❿ buttons, until the Day selection flashes.
Extend the recording time
◆ Press the ➛ or ❿ buttons, until the Stop selection flashes.
◆ Press the
or ❷ buttons, until the W- (Week) value is
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
◆ Press the
Select the recording speed
or ❷ buttons to increase or decrease the stop time.
◆ Press the ➛ or ❿ buttons, until the recording speed selection flashes.
◆ Press the
or ❷ buttons until the correct indication is displayed:
• Auto (Auto Tape Speed Select) : see page 34
• SP (Standard Play)
• LP (Long Play)
Select the PDC recording
◆ Press the ➛ or ❿ buttons, until the PDC off flashes.
◆ Press the
☛
Downloaded From Disc-Player.com Samsung Manuals
or ❷ buttons until the “On” indication is displayed.
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC On
(by selecting “On” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
33
VCR
Using the Timer Programming Feature
Timer Method
Standard
ShowView
GB
The Timer Programming feature allows you to preset the DVDVCR to record a programme up to one month before that
programme is to be broadcast. Up to six programmes can be
preset.
☛
PR
Day
Start
WE 01
19 : 00
19 : 30
Stop
:
:
:
:
:
:
:
:
:
:
Speed
SP
V/P
Off
17
1
Insert the cassette and press TIMER on the remote control.
The Timer Method is displayed.
Result:
2
Press the OK or ❿ button to select Standard option.
The TIMER PROGRAMMING menu is displayed.
Result:
3
Press ❿ to select the input source.
4
Select the required station or input source (AV1, AV2 or AUX )
by pressing the , ❷ buttons.
5
Press ❿ to select the recording day.
6
Select the required day by pressing the
7
Press ❿ to select the recording start time.
8
Select the required hour value by pressing the
9
Press ❿ to select the minutes.
10
Select the required minute value by pressing the
buttons.
11
Press ❿ to select the recording stop time.
12
Select the required recording stop time by pressing the or ❷
buttons, following the same procedure as when selecting the
recording start time.
13
Press ❿ to select the recording speed.
14
Press the or ❷ buttons to select the SP (Standard Play), LP
(Long Play), Auto (Auto Tape Speed Select) recording speeds.
15
Press the
or ❷ buttons to toggle between the V/P mode
(marked On) and the non V/P mode (marked Off).
16
17
When you have finished, press the RETURN button.
or ❷ buttons.
or ❷ buttons.
or
❷
Press the STANDBY/ON button to activate the timer.
Before starting recording, the DVD-VCR compares
Result:
the timer duration with the remaining time on the
cassette.
➢
34 Disc-Player.com Samsung Manuals
Downloaded From
Before presetting a recording, check that the date and
time are correct.
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the
timer recording to the actual recording time remaining
on the tape loaded. If there is insufficient tape to
complete a timer recording in AUTO mode, the DVDVCR automatically switches to LP mode to record the
whole programme.
VCR
Checking a Preset Recording
You can check your preset recordings:
PR
◆ When you have finished presetting the DVD-VCR
Date
Start
Stop
Speed
V/P
WE 01
19 : 00
19 : 30
SP
Off
:
:
:
:
:
:
:
:
:
:
◆ If you have forgotten which programmes will be
recorded
1
Press TIMER on the remote control.
Result:
The Timer Method is displayed.
2
Press the OK button to select Standard option.
Result:
The TIMER PROGRAMMING menu is displayed.
3
Press the
4
Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
5
On completion, press RETURN three times.
GB
or ❷ buttons to select the required programme.
VCR
Cancelling a Preset Recording
You can cancel any programmes that are:
PR
◆ Incorrect
◆ No longer required
1
Press TIMER on the remote control.
Result:
The Timer Method is displayed.
2
Press the OK or ❿ button to select Standard option.
The TIMER PROGRAMMING menu is displayed.
Result:
3
Select the programme to be cancelled by pressing the
buttons.
4
Press the CLEAR button to cancel the selected programme.
All the recording information is deleted and the
Result:
broadcast will not be recorded.
5
On completion, press RETURN three times.
Date
Start
Stop
Speed
V/P
WE 01
19 : 00
19 : 30
SP
Off
:
:
:
:
:
:
:
:
:
:
or ❷
4
Downloaded From Disc-Player.com Samsung Manuals
35
VCR
Playing a Cassette
This function allows you to play back any pre-recorded cassette.
GB
1
Switch on both the television and your DVD-VCR.
2
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ❿ll.
Otherwise, the cassette is played automatically.
2
3
➢
3
EJECT
3
SELECT
VOL
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto
Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette rewind automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
To...
Then press...
Stop the playback
■ (STOP).
P.SCAN
Eject the cassette
VCR
(EJECT).
Adjusting Picture Alignment Manually
The Picture Adjustment feature allows you to adjust the
alignment manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK ( or ) buttons until the picture is clear
and stable.
Result:
◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
36 Disc-Player.com Samsung Manuals
Downloaded From
VCR
Selecting the Audio Output Mode
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are
available.
Option
GB
Description
L
Used to listen to the sound on the left Hi-Fi channel.
R
Used to listen to the sound on the right Hi-Fi channel.
MIX
Used to listen to the mixed sound of the Hi-Fi and
normal channels.
MONO
Used to listen to the sound on the normal mono
channel.
LR
Used to listen to Hi-Fi stereo sound on the left and right
channels.
➢
L
LR
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of
Mono.
R
MIX
MONO
To select the sound mode, simply press the AUDIO button on the
remote control until the required option is displayed.
VCR
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
➢
1
Press:
◆
◆
❿ll to start playing the cassette
❿ll button one more time to make still mode.
◆
❿❿ to start SLOW mode.
➛➛ or ❿❿ button as many times as required to decrease or
◆
increase the speed respectively
To return to the normal speed, press the ❿ll button twice.
◆
2
No sound is heard when playing back a cassette in
slow motion.
When playing back in slow motion, picture interference may
occur.
Press the TRK ( or ) buttons to minimize this effect.
☛
When you have been using the Slow Motion function
for more than about two minutes, the DVD-VCR will
automatically play to protect the:
1
1
2
2
◆ Cassette
◆ Video heads
Downloaded From Disc-Player.com Samsung Manuals
37
VCR
Playing a Sequence at Variable Speeds
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example:
You wish to analyze a sportsperson’s technique,
movement by movement.
GB
The Shuttle function is available on the Remote control
➢
1
1
1
Press:
◆
◆
◆
2
No sound is heard when playing a sequence at variable
speeds.
❿ll during playback
SHUTTLE (<<) to play the cassette backwards
SHUTTLE (>>) to play the cassette forwards
Each time you press a SHUTTLE button, the speed is changed
as shown in the following illustration.
REVERSE REVERSE REVERSE
PLAY
PLAY
PLAY
X9
X5
X3
38 Disc-Player.com Samsung Manuals
Downloaded From
STILL
SLOW
MOTION
X1/10
SLOW
MOTION
X1/5
PLAY
PLAY
X3
PLAY
X5
PLAY
X9
VCR
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
GB
➞
etc.
Prev
Seq. being
Next
Seq.
played
Seq.
2
➢
1
1
etc.
2
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
Go to [0:00:00] Stop
Use this feature when you want to search for the [0:00:00] counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to [0:00:00].
The VCR will rewind or fast forward, searching for the [0:00:00] counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding
buttons, until the Go To [0:00:00] option is selected.
2
Press the OK or ❿.
or
❷
End Search
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1
After pressing the SEARCH, press the corresponding
buttons, until the End Search option is selected.
2
Press the OK or ❿.
Downloaded From Disc-Player.com Samsung Manuals
or
❷
39
VCR
Searching for a Specific Sequence
Intro Scan
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2
Press the OK or ❿ .
3
Press the ➛➛ or ❿❿ buttons depending on the direction
where your desired programme is located.
4
When an Index mark is found the DVD-VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.
5
If you want to watch the tape from a particular Index, simply
press ❿II twice.
GB
INTRO SCAN
:
or ❷
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different
programmes on a tape and you have rewound the tape to the
beginning, by using this feature you can go directly to the start of
programme 2 simply by pressing the SEARCH button.
INDEX SEARCH :
- 06
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2
Press the OK or ❿ .
3
Press the ➛➛ or ❿❿ buttons twice more. This will take
you directly to the start of the desired programme is located.
4
These Index searches can be made forwards: (press ❿❿) or
backwards: (press ➛➛ ). (➛➛ -20
0
+20 ❿❿✌
●
5
3
3
40 Disc-Player.com Samsung Manuals
Downloaded From
●
●
●
To cancel an Index search simply press the ❿II or ■ button.
or ❷
Using the Tape Counter
VCR
The tape counter:
◆ Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the DVD-VCR
GB
◆ Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
◆ Press INFO. twice to display the counter
◆ Press CLEAR when you want to set the tape counter to
zero
3
When you are ready,
◆ Start playback or Recording.
◆ Press the ■ button.
◆ To fast-froward or rewind to the sequence at which the
counter was set to zero, press ➛➛ or ❿❿.
➢
0:00:00
2
2
Some DVD-VCR information, such as the counter, can
be displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 27).
Press INFO.:
◆ Once to display the current function, programme
number, recording speed, date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
Downloaded From Disc-Player.com Samsung Manuals
41
VCR
Connecting an RCA Audio/Video Input Cable
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available
on the equipment chosen.
DVD & VCR
AUX
AUDIO
IN
OUT
R
RADIO ANT.
GB
FM
75
COAXIAL
L
AM
VIDEO
1
Examples: ◆ You wish to copy a video cassette with the help of
a second VCR (see page 43).
◆ You wish to play back and/or copy pictures taken
with a camcorder (see page 43).
☛
DVD & VCR
AUX
AUDIO
IN
RADIO ANT.
FM
75
COAXIAL
◆ Make sure that both the television and the DVDVCR are switched off before connecting the cables.
3
OUT
R
1
Connect one end of the RCA video cable into the VIDEO INPUT
socket on the rear of the DVD-VCR.
2
Plug the other end of the video cable into the appropriate output
connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable supplied into the
AUDIO INPUT sockets on the rear of the DVD-VCR.
L
AM
VIDEO
3
➢
4
42 Disc-Player.com Samsung Manuals
Downloaded From
Take care to respect the colour coding of the left and right
channels.
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
VCR
Recoding from Another VCR or Camcorder
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
☛
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any form
without the permission of the owners of the
corresponding copyright.
1
Connect the DVD-VCR, from which the cassette is to be copied,
to the appropriate SCART input connectors on the rear of your
DVD-VCR, as indicated on page 12.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR
or camcorder).
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR:
◆ AV1, AV2 for the SCART input
◆ AUX for the RCA input
5
Start playing back the cassette to be copied.
6
Hold REC ( ● ) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press ■ on both VCR and
DVD-VCR.
➢
GB
EJECT
STANDBY/ON
SELECT
PHONES
REC
S.MODE
COPY
PROG
VOL
P.SCAN
2
6
7
If you wish to view the cassette being copied:
◆ Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
Downloaded From Disc-Player.com Samsung Manuals
43
VCR
Audio Dubbing a Pre-recorded Cassette
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
◆ A CD, DVD
◆ A microphone connected to a sound system
GB
◆ A cassette player
Restriction:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1
Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
2
Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the rear of your DVD-VCR.
3
Insert the pre-recorded cassette on which the audio track is to
be replaced, and press the ❿ll to start playback.
4
Search for the Audio Dubbing (ending) point using the ❿❿, and
set the counter to 0:00:00 by pressing INFO. and CLEAR.
5
Search back slightly beyond the Audio Dubbing start point using
the ➛➛ button.
6
Press the ❿ll button.
Press the ❿ll button one more time to make Still mode.
7
Press A.DUB.
Your DVD-VCR is now in the Audio dubbing Still mode.
Result:
8
On the sound system, locate the point on the cassette at which
you wish to start playback.
Example: The track that you wish to record on the cassette.
9
When you are ready:
◆
Start playback on the sound system
◆
Press the REC ( ● ) on the remote control.
The soundtrack is replaced on the pre-recorded
Result:
cassette.
10
The audio dubbing will finish when the counter reaches 0:00:00.
DVD & VCR
AUX
AUDIO
IN
RADIO ANT.
FM
75
COAXIAL
OUT
R
L
2
AM
VIDEO
7
A.DUB
-0:05:23
➢
44 Disc-Player.com Samsung Manuals
Downloaded From
The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 37).
VCR
Using the TV Buttons on the Remote Control
Your DVD-VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible, follow the
instructions below.
GB
1
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand
Codes
Brand
Codes
SAMSUNG
AKAI
GRUNDIG
LOEWE
PANASONIC
01 to 06
09, 23
09, 17, 21
02
08, 23 to 27
PHILIPS
SABA
SONY
THOMSON
TOSHIBA
02, 20, 22
13, 14, 22 to 24
15, 16
13, 14, 24
07, 16 to 19, 21
2
2
3
4
Result:
➢
If your television is compatible with the remote control,
it will switch off. It is now programmed to operate with
the remote control.
If several codes are indicated for your television brand,
try each one in turn until you find one that works.
☛
When you change the batteries in the remote control,
you must reprogramme the code, following the same
procedure.
4
5
You can then control the television using the following buttons.
5
Button
Function
TV STANDBY/ON ➀ Used to switch the television on and off.
TV or VCR ➁
Used to switch between the TV and VCR modes.
INPUT SEL. ➂
Used to select an external source.
VOL + or –
➃
Used to adjust the volume of the television.
PROG/TRK
( or )
➄
Used to select the required programme.
TV MUTE
➢
➅
6
Used to mute the volume of the television.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
Downloaded From Disc-Player.com Samsung Manuals
45
DVD
Choosing a Connection
The following show examples of connections commonly used to connect the DVD -VCR player with a TV
and other components. It is only available for DVD. The VCR out can not watch by this connection.
GB
Connection to an Television
Television
Television
COMPONENT VIDEO OUT
S-VIDEO OUT
Component
Jack
46 Disc-Player.com Samsung Manuals
Downloaded From
or
Super Jack
DVD
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language
in advance, they will come up automatically every time you watch
a movie.
Setup
Setup
Setup :
Display Setup
GB
Using the Disc Menu Language
This function changes the text language only on the disc
menu screens.
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using
3
Select Language Setup using
OK or ❿ button.
4
Select Disc Menu using
❿ button.
5
Use the , ❷ buttons to select ‘English’.
◆ Select “Others” if the language you want is not listed.
6
Press the OK button.
◆ English is selected and the screen returns to Language Setup
menu.
Language Setup
, ❷ buttons, then OK or ❿ button
, ❷ buttons, then press the
Disc Menu
Audio
Subtitle
: English
: English
: Automatic
, ❷ buttons, then press the OK or
Disc Menu Language
Disc Menu
Downloaded From Disc-Player.com Samsung Manuals
47
DVD
Setting Up the Language Features
Language Setup
Disc Menu
Audio
Subtitle
Using the Audio Language
: English
: English
: Automatic
GB
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using
3
Select Language Setup using
OK or ❿ button.
4
Select Audio using
5
Press the , ❷ buttons to select ‘English’ .
◆ Select “Original” if you want the default soundtrack language
to be the original language the disc is recorded in.
◆ Select “Others” if the language you want is not listed.
6
Press the OK button.
◆ English is selected and the screen returns to Language Setup
menu.
, ❷ buttons, then OK or ❿ button.
, ❷ buttons, then press the
,❷ buttons, then press the OK or ❿ button.
Using the Subtitle Language
Setup
Setup
Setup :
Display Setup
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using
3
Select Language Setup using
OK or ❿ button.
4
Select Subtitle using
5
Use the , ❷ buttons to select ‘English’.
◆ Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
◆ Select “Others” if the language you want is not listed.
Some discs may not contain the language you
select as your initial language; in that case the disc will use its
original language setting.
6
Press the OK button.
◆ English is selected and the screen returns to Language Setup
menu.
Language Setup
Disc Menu
Audio
Subtitle
: English
: English
: Automatic
Subtitle Language
Automatic
Subtitle
48 Disc-Player.com Samsung Manuals
Downloaded From
, ❷ buttons, then OK or ❿ button.
, ❷ buttons, then press the
,❷ buttons, then press the OK or ❿ button.
DVD
Setting Up the Audio Options
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using
3
Select Audio Setup using
❿ button.
4
Use the , ❷ buttons to select the desired item.
Then press the OK or ❿ button.
◆ Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
◆ Center SPK Time Delay (See Page 67)
◆ Surround SPK Time Delay (See Page 67)
➢
, ❷ buttons, then OK or ❿ button.
, ❷ buttons, then press the OK or
How to make the SETUP menu disappear or return to
menu screen during set up; Press RETURN or ➛ button.
Downloaded From Disc-Player.com Samsung Manuals
Setup
Setup
Setup :
Display Setup
Center SPK Time Delay
Surround SPK Time Delay
GB
: 0ms
: 0ms
49
DVD
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs
that have been assigned a rating - which helps you control the
types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
Setup
Setup
Setup :
Display Setup
GB
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using
3
Select Parental Setup using
❿ button.
4
Use OK or ❿ to select Yes if you want to use a password.
The Enter Password screen appears.
5
Enter your password. The Re-Enter Password
screen appears to confirm the password.
Enter your password again. The Parental Setup screen appears.
Parental Setup
Use Password
No
Yes
: No
~
Yes
50 Disc-Player.com Samsung Manuals
Downloaded From
➢
, ❷ buttons, then OK or ❿ button.
, ❷ buttons, then press the OK or
◆
About the Rating Level ;
The Rating Level will work only when Use Password is set
to Yes. To unlock the player, OK or ❿ to select No. Use
, ❷ to select Rating Level. Press OK.
- Use , ❷ to select the level(e.g. Level 6) and press OK.
Discs that contain Level 7 will now not play.
- To cancel the rating level, use OK or ❿ to select No in Use
Password.
◆
About the Change Password ;
- Use , ❷ to select Change Password.
Press OK. The Change Password screen appears.
- Enter your new password. Re-Enter the new password
again.
• How to make the SETUP menu disappear or return to menu
screen during set up; Press RETURN or ➛ button.
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.(See page 75)
DVD
Setting Up the Display Options
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using
3
Select Display Setup using
❿ button.
4
Use the , ❷ buttons to select the desired item. Then press the
OK or ❿ button.
, ❷ buttons, then OK or ❿ button.
, ❷ buttons, then press the OK or
Setup
Setup
Setup :
Display Setup
GB
◆ TV Aspect
Depending on the type of television you have, you may want to adjust
the screen setting (aspect ratio).
1. 4:3 L-Box :
Select when you want to see the total 16:9 ratio screen DVD supplies,
even though you have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
2. 4:3 Pan-Scan :
Select this for conventional size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and right side of movie
picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
◆ Black Level
Adjusts the brightness of the screen.(On/Off)
◆ NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance. If this is not
the case, you can choose to leave “ PAL 60Hz” as is.
◆ DVD Out
1. RGB: Sends RGB signal from the AV JACK(SCART terminal).
2. S-Video: Sends S-VIDEO signal from the S-VIDEO JACK.
3. Video: - Sends COMPOSITE VIDEO signal from the AV
JACK(SCART terminal).
Display Setup
: 4:3 L-Box
TV Aspect
Black Level
NTSC Disc Output
DVD Out
: PAL 60Hz
: RGB
- Sends COMPONENT INTERLACE signal from
COMPONENT JACK.
DVD
S-Video Connections (for DVD)
The S-Video is only for the DVD player. The tuner and VCR will
still be viewed through the RF or line inputs.
You must follow the “DVD Out” instructions above to activate
your alternative (S-Video) video selection.
If your television is equipped with S-Video input, you can enjoy
superior video quality when watching DVDs with your DVD-VCR.
1
Connect S-Video Out to TV
SPEAKERS
DVD Only
COMPONENT VIDEO OUT
FRONT R
1SURROUND R
FRONT L
SURROUND L
WOOFER
CENTER
S-VIDEO OUT
To S-Video Input on Your TV
Connect an S-Video cable from the S-Video Out on the back panel
of the DVD-VCR to the S-Video Input on your television.
Downloaded From Disc-Player.com Samsung Manuals
51
DVD
Component Connections (for DVD)
SPEAKERS
DVD Only
COMPONENT VIDEO OUT
FRONT R
FRONT L
WOOFER
1
GB
SURROUND R
SURROUND L
Component video output is available only for DVD playback. RF
and Line input are available for Tuner and VCR playback.
If your TV set supports Progressive Scan, it can transmit Pr, Pb, and
Y signals separately, so you can enjoy sharp and clear picture.
CENTER
S-VIDEO OUT
☛
To Component
Input on Your TV
1
Press "OK" to confirm
Prorgessive scan mode.
Otherwise press "RETURN".
Please set your TV to component
input. If your TV doesn't have
Progressive scan mode, there will
be no signal on the screen.
Connect the component output of the DVD player to your TV set.
Use the component cable to connect the component output on the
back panel of the DVD-VCR to the component input of your TV.
◆ If you mix up the connections when connecting the component cable,
the picture will appear reddish or bluish.
2
Set your TV to COMPONENT.
Select component input as your TV's AV input. At this point, even
if the picture appears reddish, it is normal.
3
Press the P.SCAN button on the front panel.
If the P.SCAN button on the front panel of the DVD-VCR is
pressed, a blue LED will light up and the following message will be
displayed:
To activate Progressive Scan, press OK.
The following message will be displayed and then the picture will
be played in Progressive Scan mode.
4
To deactivate Progressive Scan, press the P.SCAN button again.
If the P.SCAN button on the front panel of the DVD-VCR is
pressed again, a blue LED will light up and Progressive Scan
mode will be canceled. Select another mode as your TV's AV input
to view another output of the DVD-VCR.
➢
➢
52 Disc-Player.com Samsung Manuals
Downloaded From
What is Progressive Scan?
It is a set of jacks that can provide sharp and clear picture
quality by using twice the number of fields of lines than
component output.
This is available only for a TV set that supports Progressive Scan.
• While Progressive Scan is active, video, S-video, and SCART
output are not available.
• To activate Progressive Scan, the DVD-VCR must be in Stop
mode.
You can listen to audio sound through AUX audio output or 5.1CH
speakers while watching Component or S-Video output.
DVD
Special Playback Features
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the ❿ll
button.
1
GB
1
Still
Press the ❿ll button on the remote control during playback.
◆
◆
◆
2
The picture will still and the audio will mute.
To resume playback, press the ❿ll button.
If the player is left in Still mode for 5 minutes, it will stop
automatically.
SKIP Forward/Back
While a CD or DVD disc is in Play mode, press the ❿❿l / l➛➛
buttons on the remote control or front panel to jump forward and
backward through disc chapters/tracks.
◆
◆
◆
Skip Forward will jump to the next chapter/track.
Skip Back will jump to the beginning of the current chapter/track.
Press Skip Back again to jump to the beginning of the previous
chapter/track.
2
2
Search Forward/Back
While a disc is in Play mode, press and hold the ❿❿ /➛➛ buttons on
the remote control or front panel to visually search
forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed. Press
❿ll button to resume normal speed.
NOTE: CD search speed - 2X, 4X, 8X
3
Slow Motion
During playback, press the ❿ll button to Still the image. Then use
the ❿❿ to play in slow motion at variable speeds.
◆
◆
◆
◆
4
4
Each press increases the slow motion speed playback to 1/8,
1/4 or 1/2 normal speed.
Audio is muted during slow motion playback
Slow function operates only in the forward direction
Slow function is not available for CD
Stop/Resume
◆
◆
Press the ■ button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the ❿ll
button.
Press the ■ button twice to completely stop playback. The next
time you press ❿ll, the disc will start over from the beginning.
Downloaded From Disc-Player.com Samsung Manuals
53
DVD
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
GB
1
Press the EZ VIEW button.
• The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the screen setting in the initial DVD menu.
• To ensure correct operation of the EZ VIEW button, you should set the correct aspect ratio in the
initial setup (See page 51).
If you are using a 16:9 TV
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off. When playing a 2.35:1 aspect ratio disc, the black bars at the top
and bottom of the screen will disappear. The picture will look vertically stretched. (Depending on the type of disc,
the black bars may not disappear completely.)
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to
prevent the picture from looking horizontally stretched.
54 Disc-Player.com Samsung Manuals
Downloaded From
Adjusting the Aspect Ratio (EZ View)
DVD
If you are using a 4:3 TV
GB
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
• 4:3 Pan Scan
The left and right of the screen are cut off and displays the central portion of the 16:9 screen.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically
stretched.
• Zoom Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to
prevent the picture from looking horizontally stretched.
For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture would look vertically
stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
➢
• This function may behave differently depending on the type of disc.
Downloaded From Disc-Player.com Samsung Manuals
55
DVD
Using the Display Function (DVD/VCD/CD)
When Playing a DVD
GB
1
During play, press the INFO. button on the remote.
2
Use the
3
Use the ➛, ❿ buttons to make the desired setup.
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from the
desired time.
4
To make the screen disappear, press the INFO. button again.
1
➢
, ❷ buttons to select the desired item.
• What is a Chapter?
Each Title on a DVD is usually divided into chapters (similar to
tracks on an audio CD).
• What is a Title?
A DVD may contain several different titles. For example, if a
disc contains four different movies, each might be considered a
title.
TITLE
ENG
To access the desired title when there is more than one in the
disc. For example, if there is more than one movie on a DVD,
each movie will be identified.
ENG
MOVE
OK
CHAPTER
TIME
AUDIO
ENG
ENG
MOVE
SUBTITLE
OK
Most of DVD discs are recorded in chapters so that you can
quickly find a specific passage.
Allows playback of the film from a desired time.
You must ok the starting time as a reference.
Refers to the language of the film soundtrack. In the example,
the soundtrack is played in English 5.1CH. A DVD disc can
have up to eight different soundtracks.
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or,
if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
➢ When in VCD 2.0 mode (MENU ON), this function does
not work. Use the DISC MENU button in VCD 2.0 mode to
select MENU ON or OFF.
ENG
ENG
0~9
OK
56 Disc-Player.com Samsung Manuals
Downloaded From
DVD
Changing the Camera Angle
Using the ANGLE button
When a DVD contains multiple angles of a particular scene, you
can select the Angle function.
GB
1
Press the ANGLE button to see if an ANGLE
(
) mark is present at the upper left hand corner of the screen.
1
When an ANGLE mark is shown, press the ANGLE button, then
an ANGLE select icon will appear at the upper left hand corner
of the screen.
2
Use the ➛, ❿ buttons to select the desired screen angle.
3
To turn off the display, press the ANGLE button again.
5
DVD
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the
SUBITILE button.
Using the SUBTITLE button
1
Press the SUBTITLE button.
2
Use the ➛, ❿ buttons to select the desired subtitle language.
3
Use the , ❷ buttons to determine whether or not the subtitle
will be displayed.
• The subtitle languages are represented by abbreviations.
➢
1
ENG
On
ENG
Off
• This function depends on what languages are encoded
on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up
when ever you play a DVD; Refer to “Setting Up the
Language Features” on page 48.
Downloaded From Disc-Player.com Samsung Manuals
57
DVD
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or
all of the disc.
When playing a DVD
GB
1
1
Press the REPEAT button on the remote.
Repeat screen appears.
2
Select Chapter, Title or A-B using the ➛, ❿ buttons.
• Press the REPEAT button. Select A-B on screen with the ➛, ❿
buttons.
DVD
Off
• Press OK at the point where you want the repeat play to start (A).
The B is automatically highlighted.
Chapter Title A - B
• Press OK at the point where you want the repeat play to stop (B).
• To terminate the function, press the 'CLEAR' button.
• A-B REPEAT does not allow you to set point (B) until at least 5
seconds has elapsed after point (A) has been set.
VCD/CD
Off
3
Press OK.
4
To return to normal play, press REPEAT again, then press the
➛, ❿ buttons to select Off and press OK.
• It is available to press CLEAR button on the remote controller in
order to stop REPEAT play.
Track Disc A - B
➢ When in VCD 2.0 mode (MENU ON), this function does not work.
Use the DISC MENU button in VCD 2.0 mode to select MENU ON
or OFF.
DVD
Using the Zoom (DVD/VCD)
1
58 Disc-Player.com Samsung Manuals
Downloaded From
1
During play or still mode, press the ZOOM button on the remote. A
square will be displayed on screen.
2
Use the , ❷ or ➛, ❿ button to select the part of the screen you
want to zoom in on.
3
Press the OK button.
◆ During DVD play : press OK to zoom in 2X/4X/2X/Normal in
order.
◆ During VCD play, press OK to zoom in 2X/normal in order.
DVD
Repeat Chapter/Title
You can repeat a single chapter or a complete title.
1
Open Repeat Menu
GB
1
Press the REPEAT button while in Play mode to open the Repeat
menu.
◆ The current Repeat mode will be highlighted.
2
Select “Chapter”
Use the ➛, ❿ buttons to select “Chapter”.
◆
3
DVD
When you select Chapter “Chapter” will be highlighted.
Off
Chapter Title A - B
Repeat Chapter
Press the OK button to repeat the current chapter.
4
Select “Title”
Use the ➛, ❿ buttons to select “Title”.
◆ When you select Title “Title” will be highlighted.
5
Repeat Title
VCD/CD
Press the OK button to repeat the title.
Off
Of
Track Disc A - B
➢ DVD repeats play by chapter or title, VCD repeats play by
track or disc.
DVD
Selecting the Audio Language
DVD
You can select a desired audio language quickly and easily with the
AUDIO button.
ENG DOLBY DIGITAL 5.1CH
Using the AUDIO button
1
Press the AUDIO button.
2
Use the ➛, ❿ buttons to select the desired language on a DVD.
◆ The audio languages are represented by abbreviations.
3
VCD/CD
Use the ➛, ❿ buttons to select Stereo (On VCD/CD)
Stereo
➢
• This function depends on what audio languages are encoded on
the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up whenever you
play a DVD ; Refer to “Setting Up the Language Features” on
page 48.
Downloaded From Disc-Player.com Samsung Manuals
59
DVD
Using the Mark Function (DVD/VCD)
This feature lets you bookmark sections of a DVD or VCD so you
can quickly find them at a later time.
GB
Using the Mark Function (DVD)
1
3
1
During play, press the MARK button on the remote. The Mark
icons will be displayed.
2
Use the ➛, ❿ buttons to move to the desired Mark icon.
3
When you reach the scene you want to mark, press the OK
button. The icon will change to a number (1, 2, or 3).
4
Press the MARK button to turn off the display.
Recalling a Marked Scene
– – –
1
During play, press the MARK button on the remote.
2
Use the ➛, ❿ buttons to select a marked scene.
3
Press the ❿ll buttons to skip to the marked scene.
Clearing a Mark
1
During play, press the MARK button on the remote.
2
Use the ➛, ❿ buttons to select the mark number you want to
delete.
3
Press the CLEAR button to delete a mark number.
Press the MARK button to turn off the display.
➢ • Up to three scenes may be marked at a time.
• Depending on the disc, the mark function may not work.
• When in VCD 2.0 mode (MENU ON), this function does not
work.
60 Disc-Player.com Samsung Manuals
Downloaded From
DVD
MP3-CD Playback
MP3-CD Playback
Data CDs (CD-Rs, CD-RWs) encoded in MP3 (MPEG1 Audio Layer 3)
format can be played.
Off
ROOT
ROOT
CLASSIC
JPG
METAL
POP
WMA
WMAMP3
00:00:08
SONG4
Before You Begin...
GB
• Set the channel to "3" or use the TV/VIDEO button on the
TV to select the input source.
• Press the DVD button on the remote control to switch to
DVD mode.
1
2
Press the OPEN/CLOSE button to open the disc tray, and then
load the MP3 disc.
◆ The MP3 menu screen will appear. Depending on the MP3
disc, the appearance of the menu may be different.
Use
, ❷ buttons to select the folder, and then press the OK
button.
◆ A list of albums in the folder will appear.
- To view the next album, press the RETURN button.
Off
..
ROOT
CLASSIC
JPG
METAL
POP
WMA
WMAMP3
WMA
MP3
WMA
MP3
WMA
WMA
MP3
OK
3
Use ,❷ buttons to select ALBUM, and then press the OK button.
◆ Select the track, and then press the OK button. Playback
will start.
- To select the previous track or next track, press ➛➛ or ❿❿.
4
To change the album, press the ■ button, and then press
RETURN button.
◆ A list of albums in the MP3-CD will appear.
- To select another album and track, repeat Steps 2 and 3
above.
5
SONG1
SONG2
SONG3
SONG4
SONG5
SONG6
SONG7
REPEAT
Press the ■ button to stop playback.
Playback of MP3-CD track will stop.
◆
6
➢
Press the RETURN button to return to the initial MP3 menu.
• Depending the MP3 disc, it may take longer to start playing.
• The following types of data CDs can be played: ISO 9660
level 1, level 3, or Joliet format CD-ROMs, CD-Rs, and CDRWs; discs recorded with a compression/decompression
data rate greater than 128Kbps; and discs containing files
with the "MP3" or "mp3" extension.
• Multisession CDs with a blank segment and MP3 CD-Rs
encoded in VBR (Variable Bit Rate) format cannot be
played.
• MP3 files names should be 8 characters or less in length.
Korean characters or special characters cannot be
displayed.
• Each time you press the REPEAT button in PLAY mode, the
selection will switch a follows: Off Track Folder
RANDOM
Downloaded From Disc-Player.com Samsung Manuals
61
DVD
WMA Play
WMA Disc Playback
GB
Before You Begin...
• Set the channel to "3" or use the TV/VIDEO button on the TV to select the input source.
• Press the DVD button on the remote control to switch to DVD mode.
1
Press the OPEN/CLOSE button to open the disc tray, and then load the disc.
◆ Load the disc with the labeled side up.
2
Press the OPEN/CLOSE button to close the disc tray.
◆ As the disc tray is closing, the screen will appear.
3
Use ,❷ to select the song you want to play.
◆ To play back Press ❿ll button.
◆ To change the directory Press ■ button, and then
- Press RETURN button to move to the upper most directory and use
◆ To stop playback Press ■ button.
◆ To temporarily stop playback, Press ❿ll button.
◆ To resume playback, Press ❿ll button.
➢
Depending on the recording mode, some WMA CDs cannot be played.
62 Disc-Player.com Samsung Manuals
Downloaded From
,❷ to select the desired folder.
MP3/WMA Play
DVD
CD-R MP3/WMA discs
GB
When you record MP3 files on the CD-R, please refer to the following.
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with
Apple's Mac. These two formats are the most widely used.
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as the file
extension.
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+).
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you choose. Getting
CD audio sound requires an analog/digital sampling rate, that is conversion to MP3 format, of at least 128 Kbps
and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps will not be played properly.
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you choose. Getting
CD audio sound requires an analog/digital sampling rate, that is conversion to WMA format, of at least 64Kbps
and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played properly.
• Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected to prevent illegal copying. These files are of the following
types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM (registered trade mark of The SDMI
Foundation). You cannot copy such files.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will play MP3
recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
• This unit can play a maximum of 500 files and 300 folders per disc.
Downloaded From Disc-Player.com Samsung Manuals
63
DVD
Program Play & Random Play
PROGRAM
You can listen to songs randomly or in the desired sequence.
Up to 20 tracks can be programmed.
This function is available only with Audio CDs.
RANDOM
GB
Before You Begin...
• Set the channel to "3" or use the TV/VIDEO button on the
TV to select the input source.
• Press the DVD button on the remote control to switch to
DVD mode.
1
In STOP mode, press the REPEAT button.
The Playback Sequence menu will appear.
◆
Program Order
Track
01
05
09
13
02
06
10
14
03
07
11
15
04
08
12
16
-
-
-
-
RETURN
-
-
-
-
2
Use ➛, ❿ buttons to select PROGRAM, and then press the OK
button.
◆ The Selective Play screen will appear.
- Select <RANDOM> and press the OK button to play
tracks in random order.
3
Use , ❷ or ➛, ❿ buttons to select the desired track (CD), and
then press the OK button.
◆ The selected track will be added to the Program order.
- Press the CLEAR button. The track added last will be
deleted from the Program order.
CLEAR
4
To finish programming and start playback, press the ❿ll button.
Tracks will play in the order they are added.
◆
➢
• If the disc tray is opened during programming, Program Play will
be canceled.
• Program Play can be set only when the CD is not playing.
• To Cancel Programming
- Press the REPEAT or RETURN button.
The program will not be saved and the program screen
will disappear.
• To Cancel Program Play
- During playback or in Stop mode, press the CLEAR
button.
64 Disc-Player.com Samsung Manuals
Downloaded From
DVD
Picture CD Playback
Off
Before You Begin...
1
2
Press the OPEN/CLOSE button to open the disc tray, and then
load the disc.
◆ Load the disc with the labeled side up.
GB
Off
Press the OPEN/CLOSE button to close the disc tray.
As the disc tray is closing, the screen shown on the left will
appear.
ROOT
CLASSIC
JPG
METAL
POP
WMA
WMAMP3
◆
3
ROOT
CLASSIC
JPG
METAL
POP
WMA
WMAMP3
ROOT
• Set the channel to "3" or use the TV/VIDEO button on the
TV to select the input source.
• Press the DVD button on the remote control to switch to
DVD mode.
Use , ❷ buttons on the remote control to select the picture
you want to view, and then press the OK button.
The screen shown in the middle will appear. (Press ❿llto switch to
Slide Show mode.)
JPG
JPG
JPG
JPG
JPG
JPG
..
100K22
101K220
102K221
103K222
104K223
105K224
RETURN
•
Album: Displays thumbnail images.
•
In the thumbnail screen
- To view the next 6 pictures, press (❿❿I).
- To view the previous 6 pictures, press (I➛➛).
•
Rotate : Each time the OK button is pressed, the image
will rotate clockwise 90 degrees.
•
Zoom : Each time the OK button is pressed, the image will
enlarge up to 4X. (Normal ❖ 2X ❖ 4X ❖ 2X ❖ Normal)
•
Timer:
RETURN
Slide Show : Starts the slide show.
-
Fast : The pictures change automatically at about a 6-second
interval.
-
Normal : The pictures change automatically at about a 12second interval.
-
Slow : The pictures change automatically at about a 18-second
interval.
Album
➢
Photo: 481/537
481
482
483
484
485
486
If no buttons on the remote control are pressed for 10 seconds, the menu will disappear. Press
buttons on the remote to display the menu again.
Downloaded From Disc-Player.com Samsung Manuals
, ❷ or ➛, ❿
65
DVD
GB
Picture CD Playback
CD-R JPEG Discs
• Only files with the ".jpg" and ".JPG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special
characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
• Kodak Picture CDs are recommended.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc are over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc are over 300, only JPEG files in 300 folders can be played.
66 Disc-Player.com Samsung Manuals
Downloaded From
Setting the Delay Time
A delay effect can be added to the sound from the Center and Surround speakers to adjust the sound
according to the acoustic condition of the listening room. Initially, the delay time is set to ‘0 ms’.
• When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you
and each speaker is the same. You can set the Delay Time in the Center/Surround Speakers to
customize the sound to the acoustic of your room.
1
GB
Setting the Center Speaker
If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
(A)=Df-Dc
2
Setting the Surround Speakers
If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
(B)=Df-Ds
Ideal Center Speaker
Position
Ideal Surround
Speaker Positions
It is desirable to arrange all speakers
within this circle.
Downloaded From Disc-Player.com Samsung Manuals
Distance of (A) (m)
0.00
0.34
0.68
1.02
1.36
1.70
Setting (ms)
0
1
2
3
4
5
Distance of (B) (m)
0.00
1.02
2.04
3.06
4.08
5.10
Setting (ms)
0
3
6
9
12
15
67
About Speaker Setup
Ideal Speaker Arrangement
GB
SPEAKERS
FRONT R
FRONT L
WOOFER
DVD & VCR
AUX
AUDIO
IN
RADIO ANT.
FM
75
COAXIAL
OUT
R
SURROUND R
SURROUND L
CENTER
SPEAKERS
DVD Only
L
COMPONENT VIDEO OUT
FRONT R
FRONT L
WOOFER
AM
VIDEO
SURROUND R
SURROUND L
CENTER
S-VIDEO OUT
1
Center Speaker
Ideally, the center speaker should be positioned at the same height as the front speakers, but it may be placed
above or below your TV set.
2
Surround Speakers
It is better to place these speakers behind your listening position, facing slightly downwards, about 24 to 35
inches (60-90 cm) above your ear.
If your listening position is too close to the rear wall, place these speakers at the left and right of the listening
position so that they face each other.
3
Front Speakers
It is better to place these speakers so that their tweeters are at your ear level, facing inwards (about 45°)
toward you.
4
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
➢
Please do not set up the Subwoofer near by TV or monitor because the Subwoofer is not fully
magnetic shielded.
68 Disc-Player.com Samsung Manuals
Downloaded From
About Speaker Setup
To Set the Speaker Balance
1
Press the SPEAKER button.
Each time you press the button, the selection will change as
follows: FL C FR SR SL SU VOL.
GB
1
2
Press AMP VOL + and AMP VOL - buttons to adjust the speaker
volume.
The volume can be adjusted to a level between –10 and +10.
2
2
To Test the Speakers
1
2
In Stop mode, press the TEST button.
◆ The test tone will be output to the speakers in the following
order: FL (Front Speaker/L) C (Center Speaker) FR (Front
Speaker/R) SR (Surround Speaker/R)
SL (Surround
Speaker/L) SU (Subwoofer).
◆ A hissing sound from a speaker indicates that the speaker is
installed correctly.
To end the speaker test, press the TEST button again.
1,2
FL
C
FR
FRONT SPEAKER
LEFT
CENTER SPEAKER
FRONT SPEAKER
RIGHT
SUB
WOOFER
➢
• While the test tone is being produced, you can use the VOL
buttons to set the speaker balance for the selected channel.
SL
SUB WOOFER
SPEAKER
SURROUND SPEAKER
LEFT
SR
SURROUND SPEAKER
RIGHT
• While the subwoofer is being tested, a low bass sound of
100Hz or 125Hz will be heard.
1
To Set the Bass/Treble
1
Press the BASS or TREBLE button.
Each time you press the BASS or TREBLE button, the
corresponding setting will turn on or off.
2
Use AMP VOL + and AMP VOL - buttons to adjust the bass or
treble of the speakers.
The bass or treble can be adjusted to a level between –10 and
+10.
1
2
2
Downloaded From Disc-Player.com Samsung Manuals
69
Sound Mode Function
Sound Mode
Press the SOUND MODE button.
Each time you press the button, the mode will change as shown at
right.
◆ 4 STEREO/NATURAL/JAZZ/CONCERT/STADIUM – These
effects are available in DSP mode.
- NATURAL : When listening to regular audio (TV/Radio)
- JAZZ : When listening to jazz or pop songs
- CONCERT : When listening to classical music
- STADIUM : When listening to live music or sports broadcast
- 4 STEREO : When listening to the sound field effect close to
the original sound
- STEREO : When listening to the original sound using the front
speakers and subwoofer
◆ MATRIX./MOVIE/MUSIC (Dolby Pro Logic II) – These effects
are available in Dolby Pro Logic II mode.
- MOVIE : Select this when watching a movie.
(You can experience the feeling of actually being at
the movies.)
- MUSIC : Select this when there are many musical elements.
(You can experience the feeling of actually being at a
live concert.)
- MATRIX : Select this if the source is regular audio.
(You can listen to mono tunes in 5.1-Ch Surround
mode.)
GB
NATURAL [NATURAL]
JAZZ [JAZZ]
CONCE [CONCERT]
STA [STADIUM]
MOVIE [MOVIE]
MUSIC [MUSIC]
MA [MATRIX]
Dolby Pro Logic II
Dolby Pro Logic II is new form of multi-channel audio signal
decoding technique that is improved from the existing Dolby
Pro Logic.
Dolby Pro Logic II separates Dolby Sound recordings as well as
regular stereo audio (video audio, TV broadcast, external input)
into 5.1 channels (front left and right, center, and surround left and
right) so you can enjoy regular audio signals with 6 speakers.
In addition, you can set different modes depending on the content
and format of audio and more accurately adjust the sound field.
4 STEREO [4 STEREO]
STEREO [STEREO]
➢
• Depending the type of disc being played, the effect of each
surround mode may vary.
• During playback of a DVD encoded in 2 or more channels,
a surround mode cannot be selected.
• When you select a surround mode during playback of a
MP3, WMA or Audio CD, the 5.1-CH Surround Sound will
be selected.
70 Disc-Player.com Samsung Manuals
Downloaded From
Listening to the Radio
You can either automatically or manually tune in to an FM or AM
station.
Press the FM/AM button.
Each time you press the button, the selection will toggle between
FM and AM.
GB
Tune in to the desired station.
1
Automatic Tuning 1
Press PROG / button. A preset station will be selected on the
front panel display panel of the DVD-VCR.
2
1
Automatic Tuning 2
Press and hold l➛➛ or ❿❿l to begin automatic tuning.
3
1
Automatic Tuning 3
Press l➛➛ or ❿❿l to tune in to a lower or higher frequency.
2
Downloaded From Disc-Player.com Samsung Manuals
2
71
Presetting Stations
You can store up to 30 stations (20 FM stations and 10 AM
stations).
Example: Storing an FM station of 87.50 MHz into the preset
station number 01
1
GB
2
1
Press the FM/AM button to select "FM".
Each time you press the button, the selection will toggle between
FM and AM.
2
Use ➛➛ and ❿❿ to tune in to FM 87-50.
3
Press the ■ button or the OK button on the remote control. FM1
will blink on the display.
4
Select the reception mode and then select the preset station
number.
5
Press the ■ or OK button again to store 87-50 to FM 1.
6
Repeat steps 1 to 5 to store other stations. You can store up to 20
FM and 10 AM stations by using the PROG / button.
2
➢
3.5
6
6
72 Disc-Player.com Samsung Manuals
Downloaded From
If the station you tuned in to is broadcasting in stereo,
"STEREO" will be displayed.
Technical Specifications
Input
Output
Video input (Rear)
Euro Scart socket : 1.0Vp-p (unbalanced) 75Ω
Audio input (Rear)
Euro Scart socket : -8dBm, 47Kohm unbalanced
RF out
UHF 21-69 (Initial CH36)
Audio (DVD, VCR)
RCA jack, Euro Scart socket
Audio (DVD only)
Audio out (RCA jack)
Video (DVD, VCR)
RCA jack, Euro Scart socket
Video (DVD only)
Tape format
VCR
GB
S-Video out , Component out
RGB out : Euro Scart socket
VHS type video tape,
S-VHS type video tape (Playback only)
Color system
PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV
Tuning system
B/G, D/K
Video S/N
Above 43dB (standard recording)
Resolution
Above 240 lines (standard recording)
Audio S/N
Above 68dB (Hi-Fi), 39dB (Mono)
Audio frequency characteristics 20Hz - 20KHz (Hi-Fi)
DISC COMPATIBILITY
DVD
SYSTEM
RECEIVER
AMP
SPEAKER
CD, CD-R, CD-R/W, DVD-Video, CD-Digital Audio (5” and 3.5”),
MP3 files on CD-ROM, WMA, Video-CD
S/N RATIO
110 dB
DYNAMIC RANGE
100 dB
POWER REQUIREMENT
AC220~240V, 50 Hz, 95W
ENVIRONMENT
41-104ºF (5-40ºC); 10%-75% humidity
WEIGHT
13.0 lbs (Combo) + 22.5 lbs (SPEAKER) = 35.5 lbs
FM
AM
15 dB
64 dB
S/N RATIO
60 dB
35 dB
THD
0.5 %
2%
SENSITIVITY
FREQ. RESPONSE
20 Hz ~ 20 kHz
S/N RATIO
65 dB
CHANNEL SEPERATION
60 dB
SPEAKER SYSTEM
5.1 CHANNEL SPEAKER SYSTEM
FRONT/CENTER/SURROUND
IMPEDANCE
FREQ. RESPONSE
6Ω X 5
3Ω
140Hz ~ 20000Hz
40Hz ~ 900Hz
77dB
83dB
SPL
SIZE
FRONT
92(W)x153(D)x87.5(H)
SURROUND
CENTER
WEIGHT
244(W) x 405(D) x 333(H)
153(W)x104(D)x92(H)
FRONT
0.79Kg, 0.74Kg
SURROUND
CENTER
Downloaded From Disc-Player.com Samsung Manuals
SUBWOOFER SPEAKER
6.7Kg
0.83Kg
73
Problems and Solutions (VCR)
Before contacting the Samsung after-sales service, perform the following simple checks.
Problem
GB
Explanation/Solution
No power
◆
◆
Check that the power plug is connected to a wall outlet.
Have you pressed the STANDBY/ON button?
You cannot insert a video cassette
◆
A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television programme was not recorded
◆
◆
◆
Check the DVD-VCR aerial connections.
Is the DVD-VCR tuner properly set?
Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful
◆
◆
◆
Was the STANDBY/ON button pressed to activate the timer?
Re-check the recording start/stop time settings.
If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
No playback picture or the picture
is distorted
◆
Check to see if you are using a prerecorded tape.
You cannot see normal broadcasts
◆
◆
Check the TUNER/EXTERNAL setting. It should be on
TUNER.
Check the TV/VCR aerial connections.
Noise bars or streaks on playback
◆
Press the TRK (
When the ❿II button is pressed
during playback, the still picture
has severe “noise bars” streaks
◆
A still picture may have “noise bars”, depending on the
condition of the tape. Press the TRK ( or ) buttons
during SLOW motion to minimize this effect.
Video Head Cleaning
◆
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
If when tuning in your TV to the DVD-VCR
TV does not find the Screen
or the pattern when found suffers
from interference, it may be due to the
DVD-VCR output channel clashing with
the normal TV transmissions in your area.
To prevent this you will need to change the
DVD-VCR output channel in the following
way
1. Remove the aerial input plug from the socket marked (aerial
symbol) on the rear of the DVD-VCR.
2. Carry out the instructions “Tuning Your Television for the DVDVCR” (see page 14).
3. Carry out the instructions “Setting the DVD-VCR output
Channel” (see page 23), move the channel number
several channels down from the original setting.
(example: from 36 to 39).
4. Replace the aerial plug into the socket marked (aerial symbol)
on the rear of the DVD-VCR.
5. Re-tune your TV to the DVD-VCR again by following
instructions “Tuning Your Television for the DVD-VCR”
(page 14).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
or
) buttons to minimize this effect.
If you are unable to solve the problem after reading the above instructions, note:
◆ The model and serial number on the rear of your DVD-VCR
◆ The warranty information
◆ A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
74 Disc-Player.com Samsung Manuals
Downloaded From
Troubleshooting Guide (DVD)
Before requesting service (troubleshooting)
Problem
Disc does not play.
5.1 channel sound is not
being reproduced.
Action
Page
◆
◆
◆
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a
CD.
P6
◆
5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD-VCR player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
Check if your audio system is connected and working properly.
P46
P49
◆
◆
◆
The
icon appears on
screen.
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
Playback mode differs from
the Setup Menu selection.
◆
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
◆
The Screen Ratio is fixed on your DVDs.
No audio.
◆
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
◆
Press power on from a cold start with no disc in the unit. Press the
➛➛ and ❿❿ buttons simultaneously on the front panel for five
seconds. Switch off and on the DVD-VCR by pressing
STANDBY/ON button. The Parental Mode is now unlocked as
indicated on the display. You can now set your rating level and
change your password to a new number.
Forgot password
If you experience other
problems.
◆
◆
P47-65
P47-51
P51
P49
P50
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
Downloaded From Disc-Player.com Samsung Manuals
75
GB
Downloaded From Disc-Player.com Samsung Manuals
■ Oroi thı egguvhshı
1. H egguvhsh iscuvei eavn kai movno eavn to proiovn creiavzetai
service kai h kavrta egguvhshı evcei plhvrwı sumplhrwqeiv
kai sfragisqeiv apov to katavsthma agoravı. Epivshı
prevpei na proskomisqeiv kai to timolovgio hv h apovdeixh
lianikhvı pwvlhshı, pavnw sthn opoiva o seiriakovı ariqmovı
tou proiovntoı prevpei na eivnai eukrinhvı.
Thl. 210.629.3100
FOURLIS TRADE A.E.B.E.
L. Kruonerivou 112
145 68 Kruonevri, Apikhvı
Agaphtev pelavth,
Saı eucaristouvme gia thn empistosuvnh pou deivxate sthn
SAMSUNG me thn agorav authvı thı suskeuhvı.
To proiovn autov thı SAMSUNG eivnai egguhmevno gia
perivodo dwvdeka (12) mhnwvn apov thn hmeromhniva agoravı tou
gia antallaktikav kai ergatikav. Sthn perivptwsh pou qa
creiasteiv episkeuhv, to proiovn autov thı SAMSUNG qa
prevpei na staleiv hv na metaferqeiv sto exousiodothmevno
service, me evxoda tou agorasthv.
Exousiodothmevnoi antiprovswpoi kai exousiodothmevna
kevntra service se avlleı Eurwpaikevı cwvreı, qa apodecqouvn
touı ovrouı thı egguvhshı.
Plhroforiveı gia ta exousiodothmevna kevntra service sthn
Ellavda, mporeivte na pavrete apov thn
ELLAS (GREECE)
2. H upocrevwsh thı SAMSUNG aforav movno thn episkeuhv
tou proiovntoı
3. H episkeuhv tou proiovntoı prevpei na anativqetai movno se
exousiodothmevna kevntra service hv exousiodothmevnouı
antiproswvpouı thı SAMSUNG. Kamiva apozhmivwsh den
qa givnei apodekthv gia episkeuhv pou evcei givnei apov mh
exousiodothmevno apov thn SAMSUNG sunergeivo.
4. To proiovn autov den qa qewrhqeiv ellatwmatikov sta ulikav
hv sthn ergasiva episkeuhvı eavn qa prevpei na
prosarmosteiv, metatrapeiv hv ruqmisteiv wvste na
summorfwqeiv me tiı topikevı tecnikevı prodiagrafevı hv
prodiagrafevı pou iscuvoun se cwvra avllh apov authv gia
thn opoiva proorizovtan hv kataskeuavsthke.
H egguvhsh authv den kaluvptei apozhmiwvseiı giaÚ
* Kefalevı bivnteo kai kasetofwvnwn
* Kefalevı binteokavmeraı
* Gennhvtrieı aktinwvn Iaser sta CD, DVD
* Thleceiristhvria
* Lucniveı fouvrnwn mikrokumavtwn
* Prosarmogevı, metatropevı hv ruqmivseiı, anexavrthta
an eivnai epituchvı hv anepituchvı, ouvte opoiadhvpote
zhmiva proevrcetai ex autouv...
Downloaded From Disc-Player.com Samsung Manuals
5. H egguvhsh authv den kaluvptei kamiva apov tiı parakavtw
periptwvseiıÚ
* Periodikouvı elevgcouı, sunthvrhsh kai episkeuhv hv
antikatavstash merwvn pou ofeivlontai se fusiologikhv
fqorav
* Ta evxoda kai touı kinduvnouı metaforavı pou
scetivzontai me thn egguvhsh autouv tou proiovntoı
* Zhmiva se autov to proiovn pou proevrcetai apovÚ
A. Katavcrhsh hv kai kakhv crhvsh,
sumperilambanomevnhı allav kai mh periorismevnhı
seÚ
Mh crhvsh autouv tou proiovntoı gia touı skopouvı
pou fusiologikav proorivzetai hv suvmfwna me tiı
odhgiveı crhvsewı gia thn swsthv crhvsh kai
sunthvrhsh autouv tou proiovntoı
Thn egkatavstash kai crhvsh tou proiovntoı me
trovpouı pou antivkeintai stiı tecnikevı
prodiagrafevı asfaleivaı pou iscuvoun katav thn
crhvsh tou proiovntoı
B. Episkeuhv pou evgine apov mh exousiodothmevna
sunergeiva service
G. Atuchvmata, qeomhniveı hv opoiadhvpote aitiva pevra
tou elevgcou thı SAMSUNG,
sumperilambanomevnwn allav mh periorismevnwn twn
keraunwvn, tou nerouv, thı fwtiavı, twn dhmosivwn
anataracwvn, tou kakouv aerismouv klp.
FOURLIS TRADE A.E.B.E.
D. H egguvhsh authv den ephreavzei ta dikaiwvmata tou
katanalwthv pou problevpontai apov thn efarmosteva
eqnikhv nomoqesiva pou iscuvei, ouvte ta dikaiwvmata
twn katanalwtwvnv enantivon twn lianopwlhtwvnv pou
aporrevoun apov thn suvmbash pwvlhshı.
E. Se perivptwsh pou den upavrcei eqnikhv nomoqesiva
authv h egguvhsh qa eivnai h monadikhv kai
apokleistikhv kavluyh tou katanalwthv gia kavqe
zhmiav.
ELECTRONICS
AK68-00391A
Downloaded From Disc-Player.com Samsung Manuals