Seiki SE60GY24 User manual

USER MANUAL
SE60GY24
En
Read the User Manual carefully before using the TV
and keep it for further reference.
CONTENTS
CONTENTS
Important Safety Instructions
2
Safety Information
3
Preparation
What's Included
Front View
Rear View
Installing the Base Stand
Removing the Stand for Wall-Mounting
Remote Control
4
4
5
6
7
7
8
Connecting External Devices
9
Customizing TV Settings
Initial Setup
Navigating the On screen Display
Selecting Input Source
Picture Settings
Audio Settings
Time Settings
Setup Settings
Lock Settings
Channel Settings
10
10
11
12
12
13
14
15
16
17
Parental Control
18
Troubleshooting
20
22
Limited Warranty
23
1
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions – All the safety and operating instructions should be read before this product is
operated.
• Keep these instructions – The safety and operating instructions should be retained for future reference.
• Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
• Follow all instructions – All operating and use instructions should be followed.
• Do not use this apparatus near water – The appliance should not be used near water or moisture – for
example, in a wet basement or near a swimming pool, and the like.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles,
and at the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart or rack is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
• Unplug the apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in
any way, such as the power supply cord or plug is damaged, liquid has been spilled, or objects have fallen
into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
• Please keep the unit in a well-ventilated environment.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus should not be exposed to dripping or splashing. Objects filled with liquids,
such as vases should not be placed on the apparatus.
• WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• WARNING: The wall socket plug is used as disconnect device, the disconnect device shall remain
readily operable.
• This lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of non-insulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
• Warning: To reduce the risk of electric shock, do not remove cover (or back) as there
are no user-serviceable parts inside. Refer servicing to qualified personnel.
• The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions in the literature
accompanying the appliance.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way
that it does not require a safety connection to electrical earth.
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of
properly, have potential adverse effects on the environment and human health.
Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected
separately. As a consumer, you are responsible for ensuring that this product is disposed of properly.
This TV incorporates High-Definition Multimedia Interface (HDMI™) technology. HDMI, the HDMI logo and
High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
2
SAFETY INFORMATION
SAFETY INFORMATION
To ensure reliable and safe operation of this equipment, please read carefully all the instructions in
this user guide, especially the safety information below.
Electrical Safety
• The TV set should only be connected to a main power supply with voltage that matches the
label at the rear of the product.
• To prevent overload, do not share the same power supply socket with too many other
electronic components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on them, which may damage the leads.
• Hold the main plug, not the wires, when removing from a socket.
• During a thunderstorm, or when not using the television for extended period of time, turn off
the power switch on the back of the television.
• Do not allow water or moisture to enter the TV or power adapter. Do not use in wet, moist
areas, such as bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged,
liquid is spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally
penetrates the ventilation slots or if the set does not work normally.
• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service
personnel
the unit yourself is dangerous and may invalidate the product’s warranty.
must only service this apparatus.
• To avoid battery leakage, remove exhausted batteries from the remote control, or when not
using for long period.
• Do not break open or throw exhausted batteries on a
Physical Safety
• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure
at least 5cm (2’’) clearance all around.
• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care
of the remote control.
• To clean the TV use a soft dry cloth. Do not use solvents or petroleum based
• Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including
that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong, the wide blade, or the third prong is provided for your safety. If the provided
plug does not into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs.
• Unplug the apparatus during lightning storms or when unused for long periods.
• Refer all servicing to a
service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled, or objects have fallen into the apparatus, has been exposed to rain or moisture,
does not operate normally, or has been dropped.
• Please always connect your television to a power outlet with protective ground connection.
3
PREPARATION
PREPARATION
What is Included
TV Set
Remote Control with Batteries
Mount Stand
4
Base Stand
Ten Screws
User Manual
Quick
Start Guide
User Manual
Quick Start Guide
PREPARATION
Front View
1. VOL +/Press to adjust the volume.
2. CH
Press to select a channel.
3. MENU
Display the OSD (on screen display) menu.
4. SOURCE
Press to select among different input signal sources.
5. POWER
Switch the TV between On / Standby mode.
6. IR (Infrared Receiver)
Receive IR signals from the remote control.
7. POWER Indicator
Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby mode.
5
PREPARATION
Rear View
1. Power Cord
Connect to AC power outlet.
2. USB Port
only,cannot play
Update
multimedia
3. HDMI Inputs
(HD) signal
Connect to a
output device.
4. VGA Input
Connect to a computer or other devices
with a VGA interface.
5. PC AUDIO Input
Connect to a computer audio output.
6. COMPONENT Input
Connect to AV devices with component
(Y/Pb/Pr) video and audio output sockets.
7. AV Input
Connect to the composite VIDEO and
AUDIO (L/R) output sockets on external
video devices.
6
8. COAXIAL Digital Audio Output
Connect to the audio socket on the digital
audio system.
9. DTV/TV Input
Connect to the antenna(75Ω VHF/UHF)
Socket with the RF coaxial cable.
PREPARATION
Installing the Stand
• 1. Lay the TV face-down on a flat,
cushioned surface to avoid the screen
from damage or scratches.
• 2. Fix the Base Support to the Base
Stand using 4PCS screws.
• 3. Fix the base assembly to the main
unit using 6PCS provided screws.
2
1
• Lay the TV face-down on a flat,
cushioned surface to avoid the screen
from damage or scratches.
• Untighten the 6PCS screws holding
the stand assembly and remove them.
• Attach the wall-mount bracket to
the TV using the mounting holes on
the back of the TV. Mount this TV
according to the instructions included
in the wall-mount bracket.
WARNING: This apparatus is intended to be supported by UL Listed wall mount bracket.
7
PREPARATION
Remote Control
1.
1
2
2.
3.
4.
5.
6.
3
7.
4
6
5
7
8
9
10
12
11
14
13
15
17
16
18
19
8.
9.
10.
11.
12.
13.
14.
15.
20
21
22
23
25
24
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
8
: Switch the TV between on and
standby mode
: Mute and restore your TV sound
0~9: Select a program (ATV/DTV mode)
--: Enter multiple program channel
number such as 2-1
: Return to previous viewing channel
P.MODE: Select picture mode: dynamic/
movie/energy saving/user/standard
S.MODE: Select sound mode: standard/
music/movie/user
MTS: Switch among different audio
channels: STEREO/MONO/SAP
SLEEP: Set the TV sleep timer:
OFF/5/10…/180/240 min
SOURCE: Select among the different
input signal sources: TV/AV/Component/
HDMI1/HDMI2/HDMI3/VGA
INFO: Display the present screen
information such as the current channel
and input source
CH+/-: Select a channel
VOL+/-: Adjust the volume
A U TO : P r e s s t o a d j u s t t h e p i c t u r e
automatically in VGA
CC: Closed Caption selection: ON/OFF/
CC On Mute
V-CHIP: Set up parental control
A S P E C T: S e l e c t t h e a s p e c t r a t i o
settings:standard/wide/wide zoom/zoom/
Just Scan(only HDMI)/Dot to Dot(Only VGA)
OK: Confirm the selection in the OSD
menus
: Allows you to navigate the
OSD menus and adjust the system
settings to your preference.
MENU: Display the OSD (on screen
display) menu
EXIT: Exit the OSD menu
A/B/C/D: Single push>switch to FAV
channel>push and hold >store current
channel
CH.LIST: Display program list
ADD/ERASE: Add or delete Favorite
channels
FAV: Display the favorite channel list
FAV+/-: Add or delete favorite channels
HDMI: Select the HDMI mode directly
CONNECTING EXTERNAL DEVICES
CONNECTING EXTERNAL DEVICES
OR
HDMI Device
Headphone
Digital Audio System
Audio Cable
(not included)
RF Cable
(not included)
HDMI Cable
(not included)
Coaxial Cable
(not included)
3.5mm Audio Cable
(not included)
VGA Cable
(not included)
Component Cable
(not included)
AV Cable
(not included)
Blu-ray Player / Recorder
Computer
Video Camera
VCR
Game Console
Satellite
Antenna Cable
Satellite Receiver
9
CUSTOMIZING TV SETTINGS
CUSTOMIZING TV SETTINGS
Initial Setup
• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.
• In Standby Mode, press the
button on the main unit or on the remote control to
turn the TV on. The red LED indicator will turn blue.
• The first time you turn the TV on; it will go into the Setup Wizard. Press
buttons to select your desired mode and press OK to confirm.
Home Mode : The picture mode will be Standard if you select
this mode.
Retail Mode : Select Dynamic Mode if you would like your
picture to be brighter. At times this mode may use more energy
to operate the Volume/Sound Mode and Picture Mode.
• The SLEEP-MODE Power should be less than 1W.
10
CUSTOMIZING TV SETTINGS
• If channels cannot be found, this frame
will be displayed automatically.
Navigating the On-screen Display
• Press the MENU button to display the main menu.
• Use
buttons to navigate and select the available menus.
11
CUSTOMIZING TV SETTINGS
Selecting Input Source
• Press the SOURCE button on the
main unit or on the remote control to
display the Input Source list.
buttons to select your
• Press
desired input source among: TV/AV/
Component/HDMI1/HDMI2/HDMI3/
VGA and then press OK button to
Picture Settings
• Press the MENU button on the main
unit or on the remote control and
then press
buttons to select
PICTURE menu.
• Press
buttons to select the
following picture options and then
buttons to adjust each
press
option’s setting.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temperature
Blue Screen
12
Cycle among picture modes: Dynamic/Movie/User/
Standard.
Alternative: you may press the P.MODE button to
select the picture mode directly.
Adjust the difference between light and dark levels in
the pictures. (For User mode)
Increase or decrease the amount of white in the picture.
(For User mode)
Control the color intensity. (For User mode)
Adjust the balance between red and green levels.
Adjust the level of crispness in the edges between light
and dark areas of the picture. (For User mode)
Cycle among color temperature: Cool/Normal/Warm.
Allow the blue background to turn On/Off during weak or
no signal conditions.
CUSTOMIZING TV SETTINGS
Audio Settings
• Press the MENU button on the main
unit or on the remote control and then
buttons to select AUDIO
press
menu.
• Press
buttons to select the
following audio options and then
press the
button to adjust each
option’s setting.
Sound Mode
Bass
Treble
Balance
Surround Sound
Auto Volume
SPDIF Mode
Audio Language
Allow the selection of an audio-enhancement technique:
Standard/Music/Movie/User.
Alternative: you may press the S.MODE button to select
the sound mode directly.
Control the relative intensity of lower-pitched sounds. (For
User mode)
Control the relative intensity of higher-pitched sounds. (For
User mode)
Adjust the relative volume of the speaker in a multiple
speaker system.
Provide an enhanced listening experience.
Volume levels are automatically controlled.
Select the digital audio output mode between RAW/PCM.
Select audio language among: English, French, Spanish.
13
CUSTOMIZING TV SETTINGS
Time Settings
• Press the MENU button on the main
unit or on the remote control and then
buttons to select TIME
press
menu.
• Press
buttons to select the
following time options and then press
button to adjust each option’s
setting.
Sleep Timer
Time Zone
Daylight Saving Time
14
Select a period of time after which the TV automatically
switches to standby mode: OFF/5/10/…/180/240 min.
Alternative: You may press the SLEEP button
repeatedly to select the number of minutes directly.
Select a Time Zone among: Pacific/Alaska/Hawaii/
Eastern/Central or Mountain.
Select to turn On/Off daylight saving time.
CUSTOMIZING TV SETTINGS
Setup
• Press the MENU button on the main
unit or on the remote control and then
buttons to select SETUP
press
menu.
• Press
buttons to select the
following setup options and then
button to adjust each
press the
option’s setting.
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advanced
Closed Caption
DLC
Restore Default
Select menu language : English, French or Spanish. The
default on-screen menu language is English.
Select to turn On/Off transparency function.
Select zoom mode : Wide/Wide Zoom/Zoom/Standard/
Just Scan/Dot to Dot.
Note: Different input source, the zoom mode options may
differ.
Reduce the noise level of the connected device: Off/
Weak/Middle/Strong.
Adjust advanced option’s setting: H-POS, V-POS, Clock,
Phase or Auto. (VGA source mode only)
CC Mode
Select CC mode : On, Off or CC on Mute.
Basic
Basic Selection: CC1, CC2, CC3, CC4,
Selection
Text1, Text2, Text3, Text4.
Advanced
Advanced Selection: Service1, Service2,
Selection
Service3, Service4, Service5, and Service6.
Options: Mode, Font Style, Font Size, Font
OPTION
Edge Style, Font Edge Color, FG Color, BG
Color, FG Opacity and BG Opacity.
Select to turn On/Off the dynamic luminance control.
Restore the TV to factory default settings.
• Remarks: when select 'just scan' mode in HDMI option, the TV display as full screen,
when select 'Dot to Dot ' mode in VGA option,the TV display as full screen.
15
CUSTOMIZING TV SETTINGS
Lock Settings
• Press the MENU button on the main
unit or on the remote control and then
buttons to select LOCK
press
menu.
• Use the 0-9 buttons to input 4-digit
password to enter the LOCK menu.
• Press
buttons to select the
following options and then press the
buttons to adjust each option’s
setting.
Note: The default password is “0000”
Change Password
System Lock
US
Canada
RRT Setting
Reset RRT
Clear Lock
16
Use 0-9 buttons to input the old password and then input
the new 4-digit password. Re-enter new password for
confirmation.
Select to turn ON/OFF system lock. The following options
(US, Canada, RRT Setting and Reset RRT) will only be
accessible when you turn the system lock on.
TV RATING: Press OK button to lock or unlock
TV
TV rating.
Select MPAA rating among: N/A,G, PG, PGMPAA
13, R, NC-17,or X.
Canada
Select MPAA rating for English-speaking
English
Canada among: E, C, C8+, G, PG, 14+, 18+.
Select MPAA rating for Quebec Canada
Canada
among: E, G, 8 ans+, 13 ans+, 16 ans+, 18
French
ans+.
Set Rating Region Table.
Select to reset the RRT setting.
Clear all lock settings.
CUSTOMIZING TV SETTINGS
Channel Settings
• Press the MENU button on the main
unit or on the remote control and
buttons to select
then press
CHANNEL menu.
• Press
buttons to select the
following channel options and then
button to adjust each
press the
option’s setting.
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
Select antenna between Air and Cable.
First, select your cable system from Auto/STD/IRC/HRC.
Next, select the Auto Scan feature to scan your available
cable channels. It will perform the auto scan if the Air antenna
is selected.
Set the selected channel as favorite channels.
Show/Hide the selected channel.
Display the current channel number.
Display the current channel label.
Display the quality of current DTV signal.
17
PARENTAL CONTROL
PARENTAL CONTROL
Press the MENU button on the main unit or on the remote control and then press
buttons to select LOCK menu. Use the 0-9 buttons to input 4-digit password to enter
the LOCK menu. If used, this option feature can "block'' undesirable programming from
appearing on the TV. Parental Control offers the user a wide variety of options and settings
that restrict or "block'' the programming that can appear on the TV. Parental Control allows
the user the capability of defining which program rating they consider acceptable, to the
younger more sensitive viewer. It can be preset and turned either on or off by the user
who specifies the secret 4-number code, the password. The number of hours blocked are
specified. General audiences and children blocks should be both programmed into the
TV's memory. Viewer ratings are specified for both TV and the motion picture Industry; both
rating systems should be used, for complete coverage. The ratings are based on the ages
of children.
Overview
To ensure complete coverage for all TV programs, (movies and regular TV shows) choose
a rating for MPAA, from the selections below,as well as ratings from the TV Parental
Guidelines Rating Systems below, using the Age Block option for General Audiences, and
for children. In addition to those, you may wish to add additional restrictions from the content
block menu, and submenus examples below.
Things to Consider before Setting up Parental Control
Determine which rating you consider acceptable to the viewer. (For example,if you choose
TV-PG, more restrictive ratings will be automatically blocked; the viewer will not be able to
see: TV-PG,TV-14,or TV-MA rated programming.) Do you want to block the auxiliary video
source entirely? (Blocks the signal sent by the equipment, such as VCR, connected to the
TV Audio/VIdeo Input Jacks) Or leave unblocked, then choose allowable ratings. Block
program "Content" based on individual parameters such as: Strong Dialog, Bad Language,
Sex Scenes,Violence Scenes, or Fantasy. Violent Scenes; in Content Blk option. Select a
secret password, in the Set Password option, using the numbers keys on the remote control.
Do not forget the password, it is the only way you can access the Parental Control menu
and change rating selections, or turn Parental Control off.Do you want the Parental Control
to be active at all times? If not, you can turn it on or off with the Lock On/Off option.
• You can set different Parental Control viewing restrictions for general audiences and for
children, both can be active at the same time.
• Simply specifying one content block such as Sex Scenes, will not automatically restrict
the programming that appears from the video sources.
• Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will
automatically restrict the programming that appears from the video sources.
• You can not disable Parental Control by disconnecting the TV from power. Block
hours will be automatically reset to the original block time setting specified if power is
disconnected.
18
PARENTAL CONTROL
• Motion Picture Association of America (MPAA) Rating System
G
PG
Grade
General Audiences
Parental Guidance
Suggested
PG-13
Parents Strongly
Cautioned
R
Restricted
NC-17
X
No Rating
No children under
age 17
Hard Core Films
No Rating
Meaning
Content not offensive to most viewers.
Content is such that parents may not want their
children to view the program.
Program is inappropriate for preteens, with a greater
degree of offensive material suggested than a PG
rated program.
Not for children under 17, strong element of sex and/
or violence.
Not for children under 17 under any circumstances.
Strong sexual content.
Same as NC-17 rating.
MPAA Not Rated
• TV Parental Guideline Rating System
TV-Y
TV-Y7
Grade
All Children
Directed to Older
Children
TV-G
General Audience
TV-PG
Parental Guidance
Suggested
TV-14
TV-MA
Parents Strongly
Cautioned
Mature Audience
Only
Meaning
Content not offensive to most viewers.
Considered suitable for children over 7, may contain
fantasy violence scenes.
Considered suitable for all audience; children may
watch unattended.
Suggested unsuitable for younger children, may
contain suggestive language, bad language, sex and
violence scenes.
unsuitable for children under 14, may contain strong
language, bad language, sex and violence scenes.
Adults only, may contain strong language, bad
language, sex and violence scenes.
Canadian Rating:
Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG,14+, 18+).
Canadian French is used in Quebec (G,8 ans+, 13 ans+,16 ans+, 18 ans+).
Note: The V-Chlp will automatically block certain categories that are "more restrictive".If you block TV-Y
category,then TV-Y7 will be automatically blocked. Similarly,if you block TV-G category,then all the
categories in the "young adult" will be blocked (TV-G, TV-PG,TV-14,and TV-MA).
19
TROUBLESHOOTING
TROUBLESHOOTING
If your TV does not operate normally or cannot be turned on, please check
the following troubleshooting questions. Remember also to check any other
connected electronic device, such as DVD or blu-ray player to pinpoint the
problem. If the TV still fails to operate normally, please contact technical support.
The TV does not operate properly
The TV does not respond • The TV may freeze up during use. Disconnect the power
when pressing any
cord from the power socket for a few minutes. Reconnect the
buttons
power cord and try to operate it again as usual.
• Check that the TV is connected to the power supply.
TV cannot be switched on • Make sure all connected AV devices are switched off before
switching on your TV.
• Check to see if there are any objects between the TV and the
remote control causing an obstruction. Ensure that you are
The remote control does
pointing the remote control directly at the TV.
• Ensure that the batteries are installed with the correct polarity
not work
(+ to +, - to -).
• Install new batteries.
• Check the power of the TV. The power supply maybe
Power is suddenly turned
interrupted.
off
• Check if the sleep timer is set.
• Check whether the Auto Standby is activated.
The video function does not work
• Check whether the TV is switched on.
No picture & No Sound
• Try another channel. The problem may be caused by the
broadcaster.
• This is normal; the image is muted during the TV startup
Picture appears slowly
process. Please contact your service centre if the picture has
after switching on
not appeared after five minutes.
• Adjust the settings in the PICTURE menu.
No or poor color or poor
• Try another channel. The problem may be caused by the
picture
broadcaster.
• Check if video cables are connected properly.
Horizontal/Vertical bar or • Check for local interference such as an electrical appliance
picture shaking
or power tool.
• Station or cable channel may be experiencing problems, tune
to another station.
Poor reception on some
• Station signal is weak, reposition the antenna for better
channels
reception.
• Check for sources of possible interference.
Lines or streaks in
• Check antenna (change the position of the antenna.)
pictures
No pictures when
• Check if the input source is HDMI1/HDMI2/HDMI3.
connecting HDMI
Pictures appears in wrong • Adjust the Aspect Ratio settings in the SETUP menu or press
ratio
the ASPECT button on the remote control.
20
TROUBLESHOOTING
The audio function does not work
• Press the VOL +/- buttons.
• Sound muted? Press the MUTE button.
Picture OK but no sound
• Try another channel. The problem may be caused by the
broadcaster.
No output from one of the
• Adjust the Balance settings in the AUDIO menu.
speakers
• A change in ambient humidity or temperature may result in
Unusual sound from
an unusual noise when the TV is switched on or off and does
inside the TV
not indicate a fault with the TV.
No sound when
• Check if the input source is HDMI1/HDMI2/HDMI3.
connecting HDMI
• Keep the RF coaxial cable away from the other connected
Audio noise
cables.
Password
• Select the SET Password setting in the LOCK menu, then
enter the following master password “8899”. The master
Lost password
password clears your previous password and allows you to
enter a new password.
There is a problem in PC mode
The signal is out of range • Adjust the resolution, horizontal frequency, or vertical
(invalid format)
frequency.
Vertical bar or stripe on
background & Horizontal • Use Auto configures or adjust clock, phase, or H/V position.
Noise & Incorrect position
Screen color is unstable
• Check the signal cable.
or show a single color
• Reinstall the PC video card.
21
SPECIFICATION
SPECIFICATION
Panel Size
Display Type
Panel Technology
Panel 60 Hz Vs. 120 Hz
Display Resolution
HD Compatible
Panel Resolution
Aspect Ratio
Dynamic Contrast Ratio-Panel
Brightness (Centre Typ.) Cd/M²
Response Time (G To G)
Lamp Life (Typ. Hours)
Horizontal Viewing Angle (At CR>10)
Vertical Viewing Angle (At CR>10)
Wall-mount(LxW-mm)
60 inch diagonally
LED
TFT
60 Hz
1080P
Up to 1080P
1920 x 1080
16:9
3000:1
400
4 ms
30.000 hours
176
176
400*400 (mm)
The FCC Wants You to Know
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
or used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: 1) reorient or relocate the receiving
antenna; 2) increase the separation between the equipment and the receiver; 3) connect the
equipment to an outlet on a circuit different from that to which the receiver is connected; 4)
consult the dealer or an experienced radio/TV technician for additional suggestions.
Any changes or
not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Where shielded interface cables have
been provided with the product or
additional components or accessories elsewhere
to be used with the installation of the product, they must be used in order to ensure
compliance with FCC regulation.
Canadian DOC statement
Standard Television Receiving Apparatus Canada BETS-7
This Class B digital apparatus complies with Canadian ICES-003.
22
SEIKI LED TV’s LIMITED WARRANTY TO ORIGINAL CONSUMER
55 inches and Above Screen Size Models (the “Product”)
This Product (including any accessories included in the original packaging) as supplied and distributed in new condition,
is warranted by SEIKI DIGITAL INC. (SEIKI) to the original consumer purchaser against defects in material and workmanship
(“Warranty”) as follows:
1.
PARTS AND LABOR : For a period of one (1) year from date of original consumer purchase, if this Product or any functional
part is determined by SEIKI, or a SEIKI authorized service provider, to be defective, SEIKI will (i) supply, at no charge to the
original consumer, new or rebuilt replacement functional parts in exchange for defective functional parts, and/or (ii) repair
original consumer, or pay the labor charges to any SEIKI authorized service provider. After the applicable Warranty periods,
the consumer must pay for all parts and labor costs.
2.
IN-HOME SERVICE : During the Warranty period described above, this Warranty includes “in-home” service (subject to
availability) which includes an authorized service provider repairing the Product in the original consumer’s home or removal
of the Product for repairs at a SEIKI authorized service provider and returning the Product to the original consumer’s home.
“In-home” service is NOT available in all areas. In order for a consumer to receive “in-home” service, the Product must be
accessible to the SEIKI authorized service provider. If “in-home” service is unavailable, or the repair cannot be completed, SEIKI
may elect to (i) request that the customer transport their product to an SEIKI authorized service center, with the customer
being responsible for any transportation charges incurred to ship the Product or part(s) to SEIKI for diagnosis, repair or
To obtain Warranty Service and Troubleshooting information, please call the Toll Free Customer Service Line at:
1‐855‐MY‐SEIKI (1‐855‐697‐3454)
Please have your model and serial number available along with your date of purchase.
You can also visit us online and REGISTER your SEIKI product at:
www.SEIKI.com
To receive Warranty service, the original consumer purchaser must contact SEIKI for problem determination and service
procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the
applicable Warranty period(s), MUST be presented to SEIKI, or an authorized customer service provider, in order to obtain
the requested service.
Exclusions and Limitations
This Warranty covers manufacturing defects in materials and workmanship encountered in the normal, non‐commercial use of
the Product, and does not cover (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions,
improper installation or maintenance, alteration, accident, or excess voltage or current; (b) improper or incorrectly performed
repairs by non-authorized service facilities; (c) onsite consumer instruction or adjustments; (d) transportation, shipping, delivery,
insurance, installation or set‐up costs; (e) costs of product removal, transportation or reinstallation costs; (f ) ordinary wear and
part of the Product. In addition, this Warranty does not cover images “burnt” into the screen. This Warranty applies to the original
consumer only and does not cover products sold AS IS or WITH ALL FAULTS, or consumables (e.g., fuses, batteries, bulbs etc.), and
the Warranty is invalid if the factory-applied serial number has been altered or removed from the Product. This Warranty is valid
only in the United States and Canada, and only applies to products purchased and serviced in the United States and Canada. All
replaced parts and products, and products on which a refund is made, become the property of the Warrantor.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE
SHALL APPLY. THE WARRANTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED
ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE
PRODUCT SHALL BE BINDING ON THE WARRANTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE
PRICE ‐ AT THE WARRANTOR’S SOLE DISCRETION ‐ ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. THE WARRANTOR
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY
TO USE THE PRODUCT. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY SHALL NOT EXCEED THE
PURCHASE PRICE OF THE PRODUCT SOLD BY SEIKI. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on warranties, so
which vary from state to state.
Please send all correspondence to:
SEIKI DIGITAL INC.
c/o SEIKI Digital Customer Service
6880 Commerce Blvd., Canton, MI 48187 USA
customerservice@seikidigital.com
DO NOT SHIP PRODUCT TO THIS ADDRESS. PLEASE CONTACT CUSTOMER SERVICE TO
OBTAIN SHIPPING ADDRESSES FOR SERVICE.
23