D-Link Air Xpert
DWL-AG520
Tri-mode Dualband
Wireless PCI Adapter
Manual
Building Networks for People
TM
Contents
Package Contents ................................................................................3
Introduction............................................................................................4
Wireless Basics ....................................................................................6
Getting Started ....................................................................................10
Using the Configuration Utility ..............................................................13
Networking Basics ..............................................................................20
Troubleshooting ...................................................................................33
Technical Specifications ......................................................................38
Contacting Technical Support ..............................................................40
Warranty and Registration ...................................................................41
2
Package Contents
Contents of Package:
! D-Link Air Xpert TM DWL-AG520
Tri-mode Dualband Wireless PCI Adapter
! Manual, Warranty and Drivers on CD
! Printed Quick Installation Guide
If any of the above items are missing, please contact your reseller.
System Requirements for Configuration:
! A desktop computer with an available 32-bit PCI 2.2
slot, with an operating voltage of 5V
! Windows XP, Windows 2000, Windows Me, or Windows 98SE
! At least 128 MB of memory and a 500 MHz processor
! An 802.11a, 802.11b or 802.11g Access Point (for Infrastructure Mode) or another 802.11a, 802.11b, or 802.11g wireless
adapter (for Ad-Hoc; Peer-to-Peer networking mode).
3
Introduction
TM
The D-Link Air Xpert DWL-AG520 Tri-Mode Dualband Wireless PCI Adapter, when
installed into your desktop PC, provides you a versatile way to wirelessly connect to any
one of three available wireless networks - 802.11b and the newer, faster 802.11g and
802.11a that operate in two discrete, non-interfering frequency bands, 2.4GHz and 5GHz.
The versatile 802.11a/b/g compatible DWL-AG520 gives you an immediate way to expand
to your existing 802.11b network and protect your overall wireless network investment.
When you add an 802.11a/b/g access point (D-Link Air Xpert DWL-7000AP) or router (DLink Air Xpert DI-774), your network will be capable of handling up to four times the user
load of your current 802.11b network.
Along with compatibility to earlier 802.11b networks, the DWL-AG520 also offers the
robust speed (up to 54Mbps) of the newer 802.11g and 802.11a standards, so that
everyone can work faster and more efficiently. Additionally, the 802.11a 5GHz band
offers a way to quickly transfer data in a frequency range that does not experience
interference or interruptions from cordless phones, microwave ovens and other devices
that use the 2.4GHz frequency band.
In addition to offering faster data transfer speeds when used with other 802.11a or
802.11g products, the DWL-AG520 has the newest, most advanced security features
available today, using the draft 802.11i security standard. These additional security
features are optional. You may choose to continue using the familiar WEP security, or
you may not wish to utilize security features at all. However, if you do choose to use the
DWL-AG520’s powerful security features with other WPA (WiFi Protected Access) and
802.1x compatible products in a network with a RADIUS server, the security features
will include:
WPA*: A new security feature, Wi-Fi Protected Access authorizes and identifies users
based on a secret key that changes automatically at a regular interval.
WPA uses TKIP (Temporal Key Integrity Protocol) to change the temporal
key every 10,000 packets (a packet is a kind of message transmitted over a
network). This ensures much greater security than the standard WEP security.
(By contrast, the older WEP encryption required the keys to be changed
manually).
802.1x: Authentication is a first line of defense against intrusion. In the Authentication
process the server verifies the identity of the client attempting to connect to the
network. Unfamiliar clients would be denied access.
Users that choose not to incorporate a RADIUS server in their network may also use the
optional enhanced security features, or they may wish to continue using the standard
WEP security, or they may choose to use no security at all. However, if you do wish to
experience the enhanced security of the DWL-AG520 in conjunction with other draft
802.11i compatible products, without a RADIUS server, the Pre Shared Key mode of
WPA will assign a new security key every time the DWL-AG520 connects to the draft
802.11i Access Point. If you choose to enable the enhanced security features of the
DWL-AG520, you need only to input your encryption information once in the configuration
menu. No longer will you have to manually change the WEP key to ensure security with the DWL-AG520, you will automatically receive a new key every time you connect,
vastly increasing the safety of your communications.
*WPA will be available Q3 2003 as a driver download
4
Features
!
Dualband versatility - With the DWL-AG520, you have the option of using one
of two frequencies. If the 2.4GHz frequency band is experiencing interruptions
and interference from cordless phones, and microwave ovens, you have the option of using the 5GHz band with 802.11a enabled devices.
!
Compatible with 802.11a, 802.11b and 802.11g Devices - Fully compatible
with the IEEE 802.11a, 802.11b and 802.11g standards, the DWL-AG520
can connect with existing 802.11b routers, access points and cards. That means
you can still communicate with colleagues and friends while you have the ability
to link to even more wireless networks.
! Better Security with 802.1x and WPA* -With the DWL-AG520 in your desktop
PC you can securely connect to a wireless network using 802.1x for wireless
authentication, as well as WPA (Wi-Fi Protected Access) providing you a much
higher level of security for your data and communications than has previously
been available. To use the DWL-AG520’s 802.1x security features, your Operating System and all the devices in your network must support it. Windows XP
supports 802.1x and a free 802.1x upgrade is available for Windows 2000. Check
the manufacturer’s website for available 802.1x upgrades for other operating systems.
!
32-bit PCI Performance/Plug & Play Connectivity -The DWL-AG520 is a
powerful 32-bit PCI adapter that installs quickly and easily into desktop PCs,
and when used with other D-LinkAirXpert ABG products will automatically
connect to the network out of the box.
!
User-friendly configuration and diagnostic utilities
LEDs
LED stands for Light-Emitting Diode. The DWL-AG520 has the following
LEDs:
LED
LED Activity
Activity
A blinking light indicates data is being transmitted
Power
A steady light indicates a connection to an Access Point
*WPA will be available Q3 2003 as a driver download
5
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-touse and compatible high-speed wireless connectivity within your home, business
or public access wireless networks. D-Link wireless products will allow you
access to the data you want, when and where you want it. You will be able to
enjoy the freedom that wireless networking brings.
A WLAN is a cellular computer network that transmits and receives data with
radio signals instead of wires. WLANs are used increasingly in both home and
office environments, and public areas such as airports, coffee shops and
universities. Innovative ways to utilize WLAN technology are helping people to
work and communicate more efficiently. Increased mobility and the absence of
cabling and other fixed infrastructure have proven to be beneficial for many
users.
Wireless users can use the same applications they use on a wired network.
Wireless adapter cards used on laptop and desktop systems support the same
protocols as Ethernet adapter cards.
6
Wireless Basics (continued)
People use WLAN technology for many different purposes:
Mobility - Productivity increases when people have access to data in any
location within the operating range of the WLAN. Management decisions based
on real-time information can significantly improve worker efficiency.
Low Implementation Costs – WLANs are easy to set up, manage, change
and relocate. Networks that frequently change can benefit from WLANs ease
of implementation. WLANs can operate in locations where the installation of
wiring may be impractical.
Installation and Network Expansion - Installing a WLAN system can be
fast and easy and can eliminate the need to pull cable through walls and ceilings.
Wireless technology allows the network to go where wires cannot go - even
outside the home or office.
Inexpensive Solution – Wireless network devices are as competitively priced
as conventional Ethernet network devices.
Scalability – WLANs can be configured in a variety of ways to meet the needs
of specific applications and installations. Configurations are easily changed
and range from peer-to-peer networks suitable for a small number of users to
larger infrastructure networks to accommodate hundreds or thousands of
users, depending on the number of wireless devices deployed.
The DWL-AG520 is compatible with the following wireless products:
! D-Link Air Xpert DWL-AG650, D-Link AirPro DWL-A650, D-Link
AirPlus DWL-650+, D-Link AirPlus Xtreme G DWL-G650,
D-Link AirPro DWL-AB650
Wireless Cardbus Adapters used with laptop computers
! D-Link AirPro DWL-A520 and D-Link AirPlus DWL-520+,
D-Link AirPlus Xtreme G DWL-G520, another D-Link Air Xpert
DWL-AG520, and D-Link AirPro DWL-AB520
Wireless PCI cards used with desktop computers
! D-Link AirPlus DWL-900AP+, D-Link AirPlus Xtreme G DWL2000AP and D-Link Air Xpert DWL-7000AP
Wireless Access Points
! D-Link AirPlus DI-614+, D-Link AirPlus Xtreme G DI-624 and
D-Link Air Xpert DI-774
Wireless Broadband Routers
7
Wireless Basics (continued)
Standards-Based Technology
The DWL-AG520 Wireless Cardbus Adapter utilizes the 802.11a, 802.11b and
802.11g standard.
The IEEE 802.11g standard is an extension of the 802.11b standard. It
increases the data rate up to 54 Mbps within the 2.4GHz band. The 802.11a
standard also increases the data rate up to 54 Mbps, but within the 5GHz band.
Both 802.11a and 802.11g utilize OFDM technology.
This means that in most environments, within the specified range of this device,
you will be able to transfer large files quickly or even watch a movie in MPEG
format over your network without noticeable delays. This technology works by
transmitting high-speed digital data over a radio wave utilizing OFDM (Orthogonal
Frequency Division Multiplexing) technology. OFDM works by splitting the radio
signal into multiple smaller sub-signals that are then transmitted simultaneously
at different frequencies to the receiver. OFDM reduces the amount of crosstalk
(interference) in signal transmissions. The D-Link DWL-AG520 will automatically
sense the best possible connection speed to ensure the greatest speed and
range possible.
The DWL-AG520 offers the most advanced network security features available
2
today, including: WPA and 802.1x.
In addition to its compatibility with 802.11g and 802.11a devices, the DWLAG520 is compatible with 802.11b devices. This means that if you have an
existing 802.11b network, or a network with a mixture of 802.11g, 802.11a and
802.11b, the devices in that network will be compatible with the DWL-AG520.
1 WPA will be available Q3 2003 as a driver or firmware download
8
Wireless Basics (continued)
Installation Considerations
TM
The D-Link Air Xpert DWL-AG520 lets you access your network, using a
wireless connection, from virtually anywhere within its operating range. Keep
in mind, however, that the number, thickness and location of walls, ceilings, or
other objects that the wireless signals must pass through, may limit the range.
Typical ranges vary depending on the types of materials and background RF
(radio frequency) noise in your home or business. The key to maximizing
wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the DWL-AG520 and
other network devices to a minimum - each wall or ceiling can reduce
your D-Link wireless product’s range from 3-90 feet (1-30 meters.) Position
your devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is
1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3
feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters)
thick! Position devices so that the signal will travel straight through a wall or
ceiling (instead of at an angle) for better reception.
3. Building materials can impede the wireless signal - a solid metal door or
aluminum studs may have a negative effect on range. Try to position wireless
devices and computers with wireless adapters so that the signal passes
through drywall or open doorways and not other materials.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
devices or appliances that may generate extreme RF noise.
9
Getting Started
There are basically two modes of networking:
!
Infrastructure – using an Access Point or Wireless Router,
such as the DWL-7000AP or DI-774.
!
Ad-Hoc – directly connecting to another computer, for peer-topeer communication, using wireless network adapters on
each computer, such as two or more DWL-AG520 wireless
network PCI adapters.
On the following pages we will show you an example of an Infrastructure
Network and an Ad-Hoc Network.
An Infrastructure network contains an Access Point or a Wireless Router.
The Infrastructure Network example shown on the following page contains
the following D-Link network devices (your existing network may be
comprised of other devices):
!
A wireless Router - D-Link Air Xpert DI-774
!
A laptop computer with a wireless adapter D-Link Air Xpert DWL-AG650, D-Link AirPlus Xtreme G DWLG650, D-Link AirPro DWL-AB650,or D-Link AirPlus DWL-650+
!
A desktop computer with a wireless adapter D-Link Air Xpert DWL-AG520
!
A Cable modem - D-Link DCM-200 or DCM-201
10
Getting Started
Setting up a Wireless Infrastructure Network
1
2
3
5
4
DWL-AG520
DWL-AG650
For a typical wireless setup at home (as shown above), please do the
following:
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office)
Consult with your Cable or DSL provider for proper installation of the modem
Connect the Cable or DSL modem to your broadband router (see the Quick
Installation Guide included with your router).
Install the D-Link Air Xpert DWL-AG520 wireless PCI adapter into an available
PCI slot on your desktop computer.
(See the Quick Installation Guide included with the network adapter).
If you are connecting a laptop computer to your network, you can install the
drivers for the D-Link DWL-AG650 wireless Cardbus adapter into a laptop
computer. You may also install the DWL-A650, DWL-G650, DWL-AB650 or
other compatible D-Link wireless Cardbus adapter.
(See the Quick Installation Guide included with the wireless Cardbus adapter).
11
Getting Started
Setting up a Wireless Ad-Hoc Network
Install the D-Link DWL-AG520 Wireless PCI adapter into a desktop
computer. (See the Quick Installation Guide included with the product for
installation instructions).
Install a DWL-AG650 into a laptop computer, or you can install
another DWL-AG520 wireless PCI adapter into a desktop computer.
(See the Quick Installation Guide included with the product).
Set the wireless configuration for the adapters to Ad-Hoc mode, set
the adapters to the same channel, and assign an IP Address to
each computer on the Ad-Hoc network. (See Box below)
IP Address
When assigning IP Addresses to the computers on the network, please
remember that the IP Address for each computer must be in the same
IP Address range as all the computers in the network, and the subnet
mask must be exactly the same for all the computers in the network.
For example: If the first computer is assigned an IP Address of 192.168.0.2
with a Subnet Mask of 255.255.255.0, then the second computer can be
assigned an IP Address of 192.168.0.3 with a Subnet Mask of 255.255.255.0,
etc.
IMPORTANT: If computers or other devices are assigned the same IP
Address, one or more of the devices may not be visible on the network.
12
Using the Configuration Utility
If you wish to change the default settings or optimize the performance of the
DWL-AG520, D-Link has included a configuration utility for this purpose. However, in Windows XP, you can use either the Zero Configuration Utility or you
can use the D-Link Configuration utility.
To use the D-Link configuration utility with XP, click on the Zero Configuration
Utility icon in the taskbar in the lower corner of your computer screen and
uncheck the box in the Properties window that enables Windows configuration.
After you have done this, you can then use the D-Link Configuration utility with
XP.
Before you use the configuration utility for the DWL-AG520, you must install the
drivers and the configuration utility from the CD-ROM that came with the
DWL-AG520. (Please see the Quick Installation Guide that came with the
product.) After you have completed this installation and restarted your computer, you can access the Configuration Utility at any time by clicking on this
icon that will appear on your desktop.
After double-clicking the icon on the desktop (shown at right),
the Link Info window shown on the next page will appear:
13
Configuration Utility
Link Info
Status: Displays
the MAC Address of
the Access Point
that is associated
with the DWLAG520.
default
SSID: The Service
Set Identifier is the
name assigned to
the wireless
network. The factory
SSID setting is set
to default.
Frequency: The
DWL-AG520 is a tri-mode, dualband wireless PCI adapter. In this instance
802.11b indicates that the DWL-AG520 is communicating in the 2.4GHz band.
Wireless Mode: Either Infrastructure or Ad-Hoc will be displayed here.
Encryption: You can see if WEP is enabled or disabled here
TxRate: The default setting is Auto; TxRate settings are automatically
determined by the DWL-AG520 depending on the distance from the access
point at this default setting.
Channel: Displays the channel information. By default, the channel is set to
Auto and selection is automatically determined by the DWL-AG520.
Signal Strength: The Signal Strength represents the wireless signal between
the access point and the DWL-AG520. The percentage coincides with the
graphical bar.
Packet Count: Displays the statistics of data packets transmitted and
received.
14
Configuration Utility
D-Link AirPlus DWL-650+ 2.4GHz Wireless Cardbus
Configuration
Adapter
default
SSID - (Service Set Identifier) is a
name that identifies a wireless
network. Access Points and
wireless clients attempting to
connect to a specific WLAN
(Wireless Local Area Network)
must use the same SSID. The
default setting is default.
Wireless Mode - Click on the pulldown menu; select from the
following options:
Infrastructure - connecting
the WLAN using an Access
Point.(The default setting).
Ad-Hoc – wireless mode used when
connecting directly to a computer
equipped with a wireless adapter in a
peer-to-peer environment.
Data Encryption – select Enabled or
Disabled
IP Settings
Authentication – choose one of the following
modes:
Open Authentication – the DWLAG520 is visible to all devices on the
network
Shared Authentication – allows
communication only with other
devices with identical WEP settings
Auto – will automatically adjust to the
Authentication mode of the wireless
access point or router
Key Length – select the key length and either ASCII (e.g., a word) or hexadecimal
format.
Keys 1-4 - select the default key
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
IP Settings - Click IP Settings and the screen above will appear. You can configure
the IP Settings in this window.
Click Apply to save the changes.
15
Configuration Utility
Advanced
Frequency - Select the Frequency here. Auto is the default setting.
Starting Ad-Hoc Network – Each ,wireless
Ad-Hoc adapter
mode communicating in
must have the same setting here.
Turbo Mode - To enable Turbo mode, all devices must have the same setting
Ad-Hoc Channel - All devices in the Ad-Hoc network must have the same channel
Encryption Type– Select the Encryption type
Profile IP Settings -You can Enable or Disable the IP Settings portion of your
profile here. If you select Disable you will need to configure the IP Address
information each time you connect to a network. If you select Enable you will
maintain the same IP Address information that you have configured each time you
connect to a network.
Launch Utility on Startup– Select Enable or Disable
Data Packet Parameter - Select the parameters here
Fragmentation Threshold - This value should remain at its default setting of 2346.
If you experience a high packet error rate, you may slightly increase your
Fragmentation Threshold within the value range of 256 to 2,346. Setting the
Fragmentation Threshold too low may result in poor performance.
RTS Threshold - This value should remain at its default setting of 2346. If
inconsistent data flow is a problem, only a minor modification should be made.
16
Configuration Utility
Site Survey
Available Network
The top section of the window displays the Available Networks. Scroll up
and down the list and highlight the network to which you wish to connect.
Click on the Connect button.
Profile
In the lower half of the screen, you can manage the profiles that you have
created. Scroll up and down and highlight the profile that you wish to
configure. You can ADD or REMOVE a profile, or configure the Properties
of the profile in order to connect with an available network.
Advanced
When you click Advanced, this screen will
appear. Make the appropriate selections
for your network and click OK.
Rescan
Reorders profiles, with most accessible
listed first.
Add
Click on Add and the screen on the next page will appear.
17
Configuration Utility
Add New Profile
In this window you can configure all the properties of a profile in order to
connect with a network of your choice.
After you have entered your changes in this window, click OK to save the
changes.
18
Configuration Utility
About
The ABOUT screen gives you information about the MAC Address
and the Utility and Driver Versions and Support Frequency of the
DWL-AG520.
Networking Basics
Using the Network Setup Wizard in Windows XP
In this section you will learn how to establish a network at home or work,
using Microsoft Windows XP.
Note: Please refer to websites such as http://www.homenethelp.com
and http://www.microsoft.com/windows2000 for information about networking
computers using Windows 2000, ME or 98SE.
Go to Start>Control Panel>Network Connections
Select Set up a home or small office network
When this screen appears, click Next.
20
Networking Basics
Please follow all the instructions in this window:
Click Next
In the following window, select the best description of your computer. If your
computer connects to the internet through a gateway/router, select the
second option as shown.
Click Next
21
Networking Basics
Enter a Computer description and a Computer name (optional.)
Click Next
Enter a Workgroup name. All computers on your network should have the
same Workgroup name.
Click Next
22
Networking Basics
Please wait while the Network Setup Wizard applies the changes.
When the changes are complete, click Next.
Please wait while the Network Setup Wizard configures the computer.
This may take a few minutes.
23
Networking Basics
In the window below, select the option that fits your needs. In this example, Create a
Network Setup Disk has been selected. You will run this disk on each of the
computers on your network. Click Next.
Insert a disk into the Floppy Disk Drive, in this case drive A.
Click Next
24
Networking Basics
Please read the information under Here’s how in the screen below. After you complete
the Network Setup Wizard you will use the Network Setup Disk to run the Network
Setup Wizard once on each of the computers on your network. To continue click Next.
25
Networking Basics
Please read the information on this screen, then click Finish to complete the
Network Setup Wizard.
The new settings will take effect when you restart the computer. Click Yes to
restart the computer.
You have completed configuring this computer. Next, you will need to run the
Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use.
26
Networking Basics
Naming your Computer
To name your computer, please follow these directions:In Windows XP:
! Click Start (in the lower left corner of the screen)
!
Right-click on My Computer
!
Select Properties and click
! Select the Computer
Name Tab in the System
Properties window.
! You may enter a Com-
puter Description if you
wish; this field is optional.
! To rename the computer
and join a domain, Click
Change.
27
Networking Basics
Naming your Computer
! In this window, enter the
Computer name
! Select Workgroup and enter
the name of the Workgroup
! All computers on your network
must have the same
Workgroup name.
! Click OK
Checking the IP Address in Windows XP
The wireless adapter-equipped computers in your network must be in the same IP Address range (see Getting Started in this manual for a definition of IP Address Range). To
check on the IP Address of the adapter, please do the following:
! Right-click on the
Local Area
Connection icon
in the task bar
! Click on Status
28
Networking Basics
Checking the IP Address in Windows XP
This window will appear.
!
Click the
Support tab
!
Click Close
Assigning a Static IP Address in Windows XP/2000
Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable Gateway/Router you
will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP
Address, please follow these instructions:
!
Go to Start
!
Double-click on
Control Panel
29
Networking Basics
Assigning a Static IP Address in Windows XP/2000
! Double-click on
Network
Connections
! Right-click on Local Area
Connections
! Double-click on
Properties
30
Networking Basics
Assigning a Static IP Address
in Windows XP/2000
AG-520
! Click on Internet Protocol
(TCP/IP)
! Click Properties
! In the window below, select Use the following IP address. Input your IP
address and subnet mask. (The IP Addresses on your network must be
within the same range. For example, if one computer has an IP Address of
192.168.0.2, the other computers should have IP Addresses that are
sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be
the same for all the computers on the network).
IP Address:
e.g., 192.168.0.2
Subnet Mask:
255.255.255.0
Default Gateway:
Enter the LAN IP address of
the wireless router. (D-Link
wireless routers have a LAN IP
address of 192.168.0.1)
! Select Use the following
DNS server addresses.
Enter the LAN IP address of
the Wireless Router. (D-Link
wireless routers have a LAN
IP address of 192.168.0.1)
! Click OK
You have completed the assignment of a Static IP Address. (You do not need to assign
a Static IP Address if you have a DHCP-capable Gateway/Router).
31
Networking Basics
Checking the Wireless Connection by Pinging in Windows XP and
2000
! Go to Start > Run >
type cmd. A window
similar to this one
will appear. Type
ping
xxx.xxx.xxx.xxx,
where xxx is the IP
Address of the
Wireless Router or
Access Point. A
good wireless
connection will show
four replies from the
Wireless Router or
Access Point, as
shown.
Checking the Wireless Connection by Pinging in Windows Me and
98SE
! Go to Start > Run
> type command.
A window similar to
this will appear.
Type ping
xxx.xxx.xxx.xxx
where xxx is the IP
Address of the
Wireless Router or
Access Point. A
good wireless
connection will
show four replies
from the wireless
router or Access
Point, as shown.
32
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and
operation of the DWL-AG520. Read the following descriptions if you are having problems.
(The examples below are illustrated in Windows XP. If you have a different operating
system, the screenshots on your computer will look similar to the following examples).
1. Check that the drivers for the DWL-AG520 are installed properly.
! Go to Start >
My Computer >
Properties
! Select the
Hardware
Tab
! Click Device
Manager
33
Troubleshooting
! Double-click
on Network
Adapters
! Right-click on D-Link
DWL-AG520 Wireless
PCI Adapter
D-Link
Air Xpert DWL-AG520
D-Link AirPro DWL-AB650 Wireless Cardbus Adapter
! Select Properties
to check that the
drivers are installed properly
D-Link Air Xpert DWL-AG520
! Look under Device
Status to check that the
device is working
properly
TM
D-Link AirXpert DWL-AG520
Tri-mode Dualband Wireless PCI Adapter
Cardbus
! Click OK
34
Troubleshooting
2. I cannot connect to the Access Point or the wireless Router.
!
Make sure that the SSID on the DWL-AG520 PCI adapter is
exactly the same as the SSID on the Access Point or wireless
Router.
!
Move the DWL-AG520 and Access Point or wireless Router into
the same room and then test the wireless connection.
!
Disable all security settings. (WEP, MAC Address Control, AES)
!
Make sure that the Access Point/Router is not locked down to a
different frequency
!
Turn off your Access Point and the computer with the
DWL-AG520. Turn on the Access Point, and then turn on the
computer with the DWL-AG520.
!
Refresh the DWL-AG520 Utility
3. The DWL-AG520 Power and Link lights are not on.
!
Check to see if the DWL-AG520 PCI adapter is firmly inserted
into the PCI slot of your desktop computer.
4. I forgot my Encryption key.
!
Reset the Access Point to its factory default settings and restore the
DWL-AG520 Wireless PCI Adapter to the factory default settings.
5. The computer does not recognize the DWL-AG520 Wireless Adapter.
!
Make sure that the DWL-AG520 Wireless Adapter is properly seated
in the computer’s PCI slot.
!
If Windows does not detect the hardware upon insertion of the
adapter, make sure to completely remove drivers that were
previously loaded. To remove the drivers, do the following:
35
Troubleshooting
A. Under Tools> select Folder Options…> select View
> under Hidden files and folders > select Show
hidden files and folders
B. Uncheck Hide extension for known file types > click
on Apply
C. Search for previously loaded driver files. Remove these
files from the INF and SYSTEM32 (DRIVERS) folders
in the Windows directory. Note: Windows XP and
Windows 2000 will rename .inf files that have not
received WHQL certification into oem.inf files (e.g.,
oem1.inf).
6. The computer with the DWL-AG520 installed is unable to connect to
the wireless network and/or the Internet.
!
Check that the LED indicators for the broadband modem are
indicating normal activity. If not, there may be a problem with the
broadband connection.
!
Check that the LED indicators on the wireless router are functioning
properly. If not, check that the AC power and Ethernet cables are
firmly connected.
!
Check that the IP Address, subnet mask, gateway, and DNS settings
are correctly entered for the network.
!
In Infrastructure mode, make sure the same Service Set
Identifier (SSID) is specified on the settings for the wireless clients
and access points. The SSID factory default setting for the D-Link
products is default. (Double-click on the WLAN icon in the taskbar.
The Link Info screen will display the SSID setting).
!
In Ad-Hoc mode, both wireless clients will need to have the same
SSID. Please note that it might be necessary to set up one client to
establish a BSS (Basic Service Set) and wait briefly before setting
up other clients. This prevents several clients from trying to establish
a BSS at the same time, which can result in multiple singular BSSs
being established, rather than a single BSS with multiple clients
associated to it.
36
Troubleshooting
!
Check that the Network Connection for the wireless client is
configured properly. Select AP (Infrastructure) when connecting
to an access point and select Ad-Hoc mode when connecting
without an access point. Double-click on the WLAN icon in the
taskbar > click on Configuration to change the settings for the
wireless adapter.
!
If Security is enabled, make sure that the correct encryption keys
are entered on both the DWL-AG520 and the access point. Doubleclick on the WLAN icon in the taskbar > click Encryption. Check to
see that the key selected is set to the same key as other devices on
the network.
!
If Turbo mode is enabled, make sure that Turbo mode is enabled
on all Turbo mode compatible devices in your network, in order to
communicate.
7. How can I troubleshoot distance issues using the DWL-AG520.
!
Move the DWL-AG520 and Access Point or wireless Router into
the same room and then test the wireless connection.
!
Change the channel of the Access Point.
!
Move devices within the line of sight
37
Technical Specifications
Standards
! IEEE 802.11a
! IEEE 802.11b
! IEEE 802.11g
Bus Type
! PCI 2.2
! PCI 32-bit Interface
Temperature
! Operating: 32ºF to 149ºF (0ºC to 55ºC)
Humidity:
! 95% maximum, non-condensing
Internal Antenna Type:
! Omni Directional Dipole Antenna with 2~4 dbi gain
Security:
! 64, 128-bit WEP
! 802.1x
! WPA* - Wi-Fi Protected Access (64-,128-WEP with TKIP, MIC, IV
Expansion, Shared Key Authentication)
! Supports Advanced Encryption Standard (AES)
Physical Dimensions:
! L = 5.24 inches (133mm)
! W = 4.72 inches (120mm)
! H = 0.87 inches (22mm)
Weight:
! 0.14 lb. (63 grams)
Operating Voltage:
! 5 VDC +- 10%
* WPA will be available Q3 2003 as a driver or firmware download
38
Technical Specifications
Data Rates:
With Automatic Fallback
! 54Mbps; 48Mbps; 36Mbps; 24Mbps; 18Mbps; 12Mbps; 11Mbps;
9Mbps; 6Mbps; 5.5Mbps; 2Mbps; 1Mbps
Media Access Control:
! CSMA/CA with ACK
Frequency Range:
! 2.4GHz to 2.462GHz
! 5.150GHz to 5.850GHz
Range*:
! Indoors: Up to 328 feet (100 meters)
Modulation Technology:
! Orthogonal Frequency Division Multiplexing (OFDM)
! Complementary Code Keying (CCK)
! Direct Sequence Spread Spectrum (DSSS)
Receiver Sensitivity:
!
!
!
!
!
!
54Mbps OFDM, 10% PER,-73dBm
48Mbps OFDM, 10% PER,-76dBm
36Mbps OFDM, 10% PER,-82dBm
24Mbps OFDM, 10% PER,-85dBm
18Mbps OFDM, 10% PER,-88dBm
12Mbps OFDM, 10% PER,-89dBm
!
!
!
!
!
!
11Mbps CCK, 8% PER, -91dBm
9Mbps OFDM, 10% PER,-90dBm
6Mbps OFDM, 10% PER,-91dBm
5.5Mbps CCK, 8% PER,-92dBm
2Mbps QPSK, 8% PER,-93dBm
1Mbps BPSK, 8% PER,-94dBm
LEDs:
! Link
! Activity
Transmitter Output Power:
! 15dBm ± 2dB
Certifications:
! FCC part 15b
* Environmental factors may adversely affect wireless signal range
39
Air Xpert™ DWL-AG520
Contacting Technical Support
You can find the most recent software and user documentation on the
D-Link website.
D-Link Technical Support over the Internet:
http://support.dlink.com
When contacting technical support, please provide the following
information:
• Serial number of the unit
•
Model number or product name
•
Software type and version number
40
Air Xpert™ DWL-AG520
Warranty and Registration
Wichtige Sicherheitshinweise
1. Bitte lesen Sie sich diese Hinweise sorgfältig durch.
2. Heben Sie diese Anleitung für den spätern Gebrauch auf.
3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen.
Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient
ein angefeuchtetes Tuch zur Reinigung.
4. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur
Zubehörteile verwenden, die vom Hersteller zugelassen sind.
5. Das Gerät is vor Feuchtigkeit zu schützen.
6. Bei der Aufstellung des Gerätes ist auf sichern Stand zu achten. Ein
Kippen oder Fallen könnte Verletzungen hervorrufen. Verwenden Sie
nur sichere Standorte und beachten Sie die Aufstellhinweise des
Herstellers.
7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor
Überhitzung schützt. Sorgen Sie dafür, daß diese Öffnungen nicht
abgedeckt werden.
8. Beachten Sie beim Anschluß an das Stromnetz die Anschlußwerte.
9. Die Netzanschlußsteckdose muß aus Gründen der elektrischen
Sicherheit einen Schutzleiterkontakt haben.
10.Verlegen Sie die Netzanschlußleitung so, daß niemand darüber fallen
kann. Es sollete auch nichts auf der Leitung abgestellt werden.
11.Alle Hinweise und Warnungen die sich am Geräten befinden sind zu
beachten.
12.Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten
Sie es vom Stromnetz trennen. Somit wird im Falle einer
Überspannung eine Beschädigung vermieden.
13.Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder
Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.
Elektrischen Schlag auslösen.
41
Air Xpert™ DWL-AG520
14.Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der
elektrischen Sicherheit nur von authorisiertem Servicepersonal
geöffnet werden.
15.Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu
trennen und von einer qualifizierten Servicestelle zu überprüfen:
a –Netzkabel oder Netzstecker sint beschädigt.
b –Flüssigkeit ist in das Gerät eingedrungen.
c –Das Gerät war Feuchtigkeit ausgesetzt.
d –Wenn das Gerät nicht der Bedienungsanleitung ensprechend
funktioniert oder Sie mit Hilfe dieser Anleitung keine
Verbesserung erzielen.
e –Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.
f – Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.
16.Bei Reparaturen dürfen nur Orginalersatzteile bzw. den Orginalteilen
entsprechende Teile verwendet werden. Der Einsatz von
ungeeigneten Ersatzteilen kann eine weitere Beschädigung
hervorrufen.
17.Wenden Sie sich mit allen Fragen die Service und Repartur betreffen
an Ihren Servicepartner. Somit stellen Sie die Betriebssicherheit des
Gerätes sicher.
42
Air Xpert™ DWL-AG520
Limited Warranty
Hardware:
D-Link warrants its hardware products to be free from
defects in workmanship and materials, under normal use
and service, for the following periods measured from date of
purchase from D-Link or its Authorized Reseller:
Product Type
Warranty Period
Complete products
One year
Spare parts and spare kits
90 days
The one-year period of warranty on complete products
applies on condition that the product's Registration Card is
filled out and returned to a D-Link office within ninety (90)
days of purchase. A list of D-Link offices is provided at the
back of this manual, together with a copy of the Registration
Card. Failing such timely registration of purchase, the
warranty period shall be limited to 90 days.
If the product proves defective within the applicable
warranty period, D-Link will provide repair or replacement of
the product. D-Link shall have the sole discretion whether
to repair or replace, and replacement product may be new or
reconditioned. Replacement product shall be of equivalent
or better specifications, relative to the defective product, but
need not be identical. Any product or part repaired by
D-Link pursuant to this warranty shall have a warranty
period of not less than 90 days, from date of such repair,
irrespective of any earlier expiration of original warranty
period. When D-Link provides replacement, then the
defective product becomes the property of D-Link.
Warranty service may be obtained by contacting a D-Link
office within the applicable warranty period, and requesting
a Return Material Authorization (RMA) number.
43
Air Xpert™ DWL-AG520
If a Registration Card for the product in question has not
been returned to D-Link, then a proof of purchase (such as a
copy of the dated purchase invoice) must be provided. If
Purchaser's circumstances require special handling of
warranty correction, then at the time of requesting RMA
number, Purchaser may also propose special procedure as
may be suitable to the case.
After an RMA number is issued, the defective product must
be packaged securely in the original or other suitable
shipping package to ensure that it will not be damaged in
transit, and the RMA number must be prominently marked
on the outside of the package. The package must be mailed
or otherwise shipped to D-Link with all costs of
mailing/shipping/insurance prepaid; D-Link will ordinarily
reimburse Purchaser for mailing/shipping/insurance
expenses incurred for return of defective product in
accordance with this warranty. D-Link shall never be
responsible for any software, firmware, information, or
memory data of Purchaser contained in, stored on, or
integrated with any product returned to D-Link pursuant to
this warranty.
Any package returned to D-Link without an RMA number
will be rejected and shipped back to Purchaser at
Purchaser's expense, and D-Link reserves the right in such a
case to levy a reasonable handling charge in addition mailing
or shipping costs.
44
Air Xpert™ DWL-AG520
Software:
Warranty service for software products may be obtained by
contacting a D-Link office within the applicable warranty
period. A list of D-Link offices is provided at the back of this
manual, together with a copy of the Registration Card. If a
Registration Card for the product in question has not been
returned to a D-Link office, then a proof of purchase (such as
a copy of the dated purchase invoice) must be provided when
requesting warranty service. The term "purchase" in this
software warranty refers to the purchase transaction and
resulting licence to use such software.
D-Link warrants that its software products will perform in
substantial conformance with the applicable product
documentation provided by D-Link with such software
product, for a period of ninety (90) days from the date of
purchase from D-Link or its Authorized Reseller. D-Link
warrants the magnetic media, on which D-Link provides its
software product, against failure during the same warranty
period. This warranty applies to purchased software, and
to replacement software provided by D-Link pursuant to this
warranty, but shall not apply to any update or replacement
which may be provided for download via the Internet, or to
any update which may otherwise be provided free of charge.
D-Link's sole obligation under this software warranty shall
be to replace any defective software product with product
which substantially conforms to D-Link's applicable product
documentation. Purchaser assumes responsibility for the
selection of appropriate application and system/platform
software and associated reference materials. D-Link makes
no warranty that its software products will work in
combination with any hardware, or any application or
45
Air Xpert™ DWL-AG520
system/platform software product provided by any third
party, excepting only such products as are expressly
represented, in D-Link's applicable product documentation
as being compatible. D-Link's obligation under this
warranty shall be a reasonable effort to provide compatibility,
but D-Link shall have no obligation to provide compatibility
when there is fault in the third-party hardware or software.
D-Link makes no warranty that operation of its software
products will be uninterrupted or absolutely error-free, and
no warranty that all defects in the software product, within
or without the scope of D-Link's applicable product
documentation, will be corrected.
46
Air Xpert™ DWL-AG520
LIMITATION OF WARRANTIES
IF THE D-LINK PRODUCT DOES NOT OPERATE AS
WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY
SHALL BE, AT D-LINK'S OPTION, REPAIR OR
REPLACEMENT. THE FOREGOING WARRANTIES AND
REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER
IN FACT OR BY OPERATION OF LAW, STATUTORY OR
OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. D-LINK NEITHER ASSUMES NOR AUTHORIZES
ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE,
INSTALLATION MAINTENANCE OR USE OF D-LINK'S
PRODUCTS.
D-LINK SHALL NOT BE LIABLE UNDER THIS WARRANTY IF
ITS TESTING AND EXAMINATION DISCLOSE THAT THE
ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR
WAS CAUSED BY THE CUSTOMER'S OR ANY THIRD
PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION
OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR
ANY OTHER CAUSE BEYOND THE RANGE OF THE
INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING OR
OTHER HAZARD.
LIMITATION OF LIABILITY
IN NO EVENT WILL D-LINK BE LIABLE FOR ANY DAMAGES,
INCLUDING LOSS OF DATA, LOSS OF PROFITS, COST OF
COVER OR OTHER INCIDENTAL, CONSEQUENTIAL OR
INDIRECT DAMAGES ARISING OUT THE INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE OR
INTERRUPTION OF A D- LINK PRODUCT, HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY.
47
Air Xpert™ DWL-AG520
THIS LIMITATION WILL APPLY EVEN IF D-LINK HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
IF YOU PURCHASED A D-LINK PRODUCT IN THE UNITED
STATES, SOME STATES DO NOT ALLOW THE LIMITATION
OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU.
D-Link Offices for Registration and Warranty Service
The product's Registration Card, provided at the back of this
manual, must be sent to a D-Link office. To obtain an RMA
number for warranty service as to a hardware product, or to
obtain warranty service as to a software product, contact the
D-Link office nearest you. An addresses/telephone/fax list
of D-Link offices is provided in the back of this manual.
Trademarks
Copyright 2002 D-Link Corporation.
Contents subject to change without prior notice.
D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc.
All other trademarks belong to their respective proprietors.
Copyright Statement
No part of this publication may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from D-Link
Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976
48
49
Air Xpert™ DWL-AG520
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with this user’s guide, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CE Mark Warning
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
Warnung!
Dies ist ein Produkt der Klasse A. Im Wohnbereich kann dieses Produkt
Funkstoerungen verursachen. In diesem Fall kann vom Benutzer
verlangt werden, angemessene Massnahmen zu ergreifen.
Precaución!
Este es un producto de Clase A. En un entorno doméstico, puede
causar interferencias de radio, en cuyo case, puede requerirse al
usuario para que adopte las medidas adecuadas.
Attention!
Ceci est un produit de classe A. Dans un environnement domestique, ce
produit pourrait causer des interférences radio, auquel cas l`utilisateur
devrait prendre les mesures adéquates.
Attenzione!
Il presente prodotto appartiene alla classe A. Se utilizzato in ambiente
domestico il prodotto può causare interferenze radio, nel cui caso è
possibile che l`utente debba assumere provvedimenti adeguati.
BSMI Warning
50
Air Xpert™ DWL-AG520
Offices
Australia
D-Link Australasia
Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069 Australia
TEL: 61-2-9417-7100 FAX: 61-2-9417-1077
TOLL FREE (Australia): 1800-177100
TOLL FREE (New Zealand): 0800-900900
URL: www.dlink.com.au
E-MAIL: support@dlink.com.au & info@dlink.com.au
Level 1, 434 St. Kilda Road, Melbourne, Victoria 3004 Australia
TEL: 61-3-9281-3232 FAX: 61-3-9281-3229 MOBILE: 0412-660-064
Canada
D-Link Canada
2180 Winston Park Drive, Oakville, Ontario, L6H 5W1 Canada
TEL: 1-905-829-5033 FAX: 1-905-829-5095 BBS: 1-965-279-8732
TOLL FREE: 1-800-354-6522 URL: www.dlink.ca
FTP: ftp.dlinknet.com E-MAIL: techsup@dlink.ca
Chile
D-Link South America
Isidora Goyeechea 2934 of 702, Las Condes, Santiago, Chile, S. A.
TEL: 56-2-232-3185 FAX: 56-2-232-0923 URL: www.dlink.cl
E-MAIL: ccasassu@dlink.cl & tsilva@dlink.cl
China
D-Link China
2F, Sigma Building, 49 Zhichun Road, Haidan District, 100080 Beijing, China
TEL: 86-10-88097777 FAX: 86-10-88096789 URL: www.dlink.com.cn
E-MAIL: liweii@digitalchina.com.cn
Denmark
D-Link Denmark
Naverland 2, DK-2600 Glostrup, Copenhagen, Denmark
TEL: 45-43-969040 FAX:45-43-424347 URL: www.dlink.dk
E-MAIL: info@dlink.dk
Egypt
D-Link Middle East
7 Assem Ebn Sabet Street, Heliopolis, Cairo, Egypt
TEL: 20-2-635-6176 FAX: 20-2-635-6192 URL: www.dlink-me.com
E-MAIL: support@dlink-me.com & fateen@dlink-me.com
Finland
D-Link Finland
Thlli-ja Pakkahuone Katajanokanlaituri 5, FIN– 00160 Helsinki
TEL: 358-9-622-91660 FAX: 358-9-622-91661 URL: www.dlink-fi.com
France
D-Link France
Le Florilege #2, Allee de la Fresnerie, 78330 Fontenay le Fleury, France
TEL: 33-1-3023-8688 FAX: 33-1-3023-8689 URL: www.dlink-france.fr
E-MAIL: info@dlink-france.fr
51
Air Xpert™ DWL-AG520
Germany
D-Link Central Europe/D-Link Deutschland GmbH
Schwalbacher Strasse 74, D-65760 Eschborn, Germany
TEL: 49-6196-77990 FAX: 49-6196-7799300 URL: www.dlink.de
BBS: 49-(0) 6192-971199 (analog) BBS: 49-(0) 6192-971198 (ISDN)
INFO: 00800-7250-0000 (toll free) HELP: 00800-7250-4000 (toll free)
REPAIR: 00800-7250-8000 E-MAIL: info@dlink.de
India
D-Link India
Plot No.5, Kurla-Bandra Complex Rd., Off Cst Rd., Santacruz (E),
Bombay, 400 098 India
TEL: 91-22-652-6696 FAX: 91-22-652-8914 URL: www.dlink-india.com
E-MAIL: service@dlink.india.com
Italy
D-Link Mediterraneo Srl/D-Link Italia
Via Nino Bonnet n. 6/b, 20154, Milano, Italy
TEL: 39-02-2900-0676 FAX: 39-02-2900-1723
URL: www.dlink.it E-MAIL: info@dlink.it
Japan
D-Link Japan
10F, 8-8-15 Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan
TEL: 81-3-5434-9678 FAX: 81-3-5434-9868 URL: www.d-link.co.jp
E-MAIL: kida@d-link.co.jp
Netherlands
D-Link Benelux
Fellenoord 1305611 ZB, Eindhoven, the Netherlands
TEL: 31-40-2668713 FAX: 31-40-2668666 URL: www.d-link-benelux.n
Norway
D-Link Norway
Waldemar Thranesgt. 77, 0175 Oslo, Norway
TEL: 47-22-991890 FAX: 47-22-207039
Russia
D-Link Russia
Michurinski Prospekt 49, 117607 Moscow, Russia
TEL: 7-095-737-3389 & 7-095-737-3492 FAX: 7-095-737-3390
URL: www.dlink.ru
E-MAIL: vl@dlink.ru
Singapore
D-Link International
1 International Business Park, #03-12 The Synergy, Singapore 609917
TEL: 65-774-6233 FAX: 65-774-6322 E-MAIL: info@dlink.com.sg
URL: www.dlink-intl.com
South Africa
D-Link South Africa
102 – 106 Witchhazel Avenue, Einstein Park 2, Block B, Highveld Technopark,
Centurion, South Africa
TEL: 27 (0) 12-665-2165 FAX: 27 (0) 12-665-2186 URL: www.d-link.co.za
E-MAIL: attie@d-link.co.za
52
Air Xpert™ DWL-AG520
Spain
D-Link Iberia
C/Sabino De Arana, 56 Bajos, 08028 Barcelona, Spain
TEL: 34 93 4090770 FAX: 34 93 4910795 URL: www.dlinkiberia.es
E-MAIL: info@dlinkiberia.es
Sweden
D-Link Sweden
P. O. Box 15036, S-167 15 Bromma, Sweden
TEL: 46-(0) 8-564-61900 FAX: 46-(0) 8-564-61901
URL: www.dlink.se
Taiwan
E-MAIL: info@dlink.se
D-Link Taiwan
2F, No. 119 Pao-Chung Rd, Hsin-Tien, Taipei, Taiwan
TEL: 886-2-2910-2626 FAX: 886-2-2910-1515 URL: www.dlinktw.com.tw
E-MAIL: dssqa@tsc.dlinktw.com.tw
Turkey
D-Link Middle East
Deniz Bilgisayar, Buyukdere Cad. Naci Kasim Sk., No. 5 Mecidiyekoy,
Istanbul, Turkey
TEL: 90-212-213-3400 FAX: 90-212-213-3420
E-MAIL: smorovati@dlink-me.com
U.A.E.
D-Link Middle East
CHS Aptec (Dubai), P.O. Box 33550 Dubai U.A.E.
TEL: 971-4-366-885 FAX: 971-4-355-941 E-MAIL: Wxavier@dlink-me.com
U.K.
D-Link Europe
th
4 Floor, Merit House, Edgware Road, Colindale, London NW9 5AB United
Kingdom
TEL: 44 (0) 20-8731-5555 FAX: 44 (0) 20-8731-5511
BBS: 44 (0) 181-235-5511
URL: www.dlink.co.uk E-MAIL: info@dlink.co.uk
U.S.A.
D-Link U.S.A.
53 Discovery Drive, Irvine, CA 92618, USA
TEL: 1-949-788-0805 FAX: 1-949-753-7033
BBS: 1-949-455-1779 & 1-949-455-9616
INFO: 1-800-326-1688 URL: www.dlink.com
E-MAIL: tech@dlink.com & support@dlink.com
53