Canon LV-7292S User`s manual

MULTIMEDIA PROJECTOR
User’s Manual
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and
ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and
matrix liquid crystal display (LCD) technology.
♦ Compact Design
♦ Helpful Maintenance Functions
This projector is designed compact in size
and weight. It is easy to carry and installed
anywhere you wish to use.
Lamp and filter maintenance functions
provide for better and proper maintenance of
the projector.
♦ Simple Computer System Setting
♦ Auto Setup Function
The projector has the Multi-scan system to
conform to almost all computer output signals
quickly (p.30). Up to WUXGA resolution can
be accepted.
♦ Useful Functions for Presentations
The digital zoom function allows you to
focus on the crucial information during a
presentation (p.37)
♦ Lamp mode
Brightness of the projection lamp can be
selected (pp.27, 54).
♦ Direct Power Off Function
With the Direct Power Off function, you can
disconnect the power cord from the wall outlet
or turn off the breaker even during projection
(p.23).
♦ Logo Function
The Logo function allows you to customize
the screen logo (pp.48-50). You can capture
an image for the screen logo and use it for the
starting-up display or between presentations.
♦ Multilanguage Menu Display
Operation menu is available in 20 languages:
English, German, French, Italian, Spanish,
Portuguese, Dutch, Swedish, Finnish, Polish,
Hungarian, Romanian, Russian, Turkish,
Kazakh, Vietnamese, Chinese, Korean,
Japanese and Thai (p.46).
♦ Security Function
2
The Security function helps you to ensure
security of the projector. With the Key lock
function, you can lock the operation on the top
control or remote control unit (p.54). PIN code
lock function prevents unauthorized use of the
projector (pp.22, 55-56).
This function enables Auto input and Auto PC
adjustment by simple pressing the AUTO SET
button on the top control (p.47).
♦ Colorboard Function
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color
from the preset four colors.
♦ Power Management Mode
The Power management mode function
reduces power consumption and maintains
the lamp life (p.51).
♦ Closed Caption
This is a printed version of the program
sound or other information displayed on
the screen. You can turn on the feature and
switch the channels. (p.53)
Table of Contents
Features and Design . . . . . . . . . . . . . .
Table of Contents . . . . . . . . . . . . . . . .
To the Owner . . . . . . . . . . . . . . . . . . . .
Safety Instructions . . . . . . . . . . . . . . .
2
3
4
5
Air Circulation
8
Installing the Projector in Proper Position8
Moving the Projector
8
Compliance . . . . . . . . . . . . . . . . . . . . . 9
Part Names and Functions . . . . . . . . 10
Front
10
Back
10
Bottom
10
Rear Terminal 11
Top Control
12
Remote Control Unit
13
Remote Control Unit Battery Installation14
Remote Control Unit Operating Range 14
Remote Control Code
14
Installation . . . . . . . . . . . . . . . . . . . . . 15
Positioning the Projector
Project vertically to the screen
Adjust the Height and the Incline angle
of the projected image
Connecting to a Computer
Connecting to VIDEO Equipment
Connecting to COMPONENT VIDEO
and SCART Equipment
Using the ferrite core
Connecting the AC Power Cord
15
16
16
17
18
19
20
20
Basic Operation . . . . . . . . . . . . . . . . . 21
Turning On the Projector
Turning Off the Projector
How to Operate the On-Screen Menu
Main Menu
Zoom and Focus Adjustment
Auto Setup Function
Keystone Correction
Remote control unit Operation
21
23
24
25
26
26
26
27
Auto PC Adjustment
Manual PC Adjustment
Image Mode Selection Image Adjustment
Aspect Setting
31
32
34
35
36
VIDEO Input . . . . . . . . . . . . . . . . . . . . 38
Input Source Selection (VIDEO,
S-VIDEO)
Input Source Selection (COMPONENT,
SCART)
VIDEO System Selection
Image Mode Selection Image Adjustment
Aspect Setting
38
39
40
41
42
44
Setting . . . . . . . . . . . . . . . . . . . . . . . . 46
Setting
46
Information . . . . . . . . . . . . . . . . . . . . . 59
Input Source Information Display
59
Maintenance and Cleaning . . . . . . . . 60
WARNING indicator
Replacing the Filter
Resetting the Filter Counter
Attaching the Lens Cap
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Lamp Replacement
60
61
61
62
62
62
63
Appendix . . . . . . . . . . . . . . . . . . . . . . 65
Troubleshooting
Menu Tree
Indicators and Projector Condition
Compatible Computer Specifications
Technical Specifications
Optional Parts
Attaching the Filter Cover to
the Projector
Configurations of Terminals
PIN Code Protection
Dimensions
65
68
70
71
72
73
74
74
75
76
Computer Input . . . . . . . . . . . . . . . . . 29
Input Source Selection (ANALOG PC:
COMPUTER)
Computer System Selection
29
30
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of
its respective corporation.
3
To the Owner
Before installing and operating this projector, read
this manual thoroughly.
This projector provides many convenient features
and functions.
Operating the projector properly enables you to
manage those features and maintains it in good
condition for many years to come. Improper
operation may result in not only shortening the
product-life, but also malfunctions, fire hazard, or
other accidents.
If your projector seems to operate improperly,
read this manual again, check operations and
cable connections and try the solutions in the
“Troubleshooting” section on pages 65-67 of this
manual. If the problem still persists, contact the
dealer where you purchased the projector or the
service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES
THAT DANGEROUS VOLTAGE
CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS
UNIT.
THIS SYMBOL INDICATES THAT
THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS
IN THE USER'S MANUAL WITH THIS
UNIT.
CAUTION
Not for use in a computer room as defined in
the Standard for the Protection of Electronic
Computer/Data Processing Equipment, ANSI/
NFPA 75.
NOTE FOR CUSTOMERS IN THE US
LAMP(S) INSIDE THIS PRODUCT
CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS.
4
Safety Precaution
WARNING:  THIS APPARATUS MUST BE EARTHED.
 TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
– This projector produces intense light from the
projection lens. Do not stare directly into the
lens, otherwise eye damage could result. Be
especially careful that children do not stare
directly into the beam.
– Install the projector in a proper position.
Improper positioning may reduce the lamp life
and result in severe accident or fire hazard.
– Allowing the proper amount of space on the
top, sides, and rear of the projector cabinet is
critical for proper air circulation and cooling of
the unit. The dimension shown here indicate the
minimum space required.
If the projector is to be built into a compartment
or similarly enclosed, these minimum distances
must be maintained.
SIDE and TOP
REAR
0.7’(20cm)
1.5’(50cm)
3’(1m)
3’(1m)
– Do not cover the ventilation slot on the projector.
Heat
build-up can reduce the service life of your
20cm
projector, and can also be dangerous.
– If the projector is unused for an extended time,
unplug the projector from the power outlet.
– Do not50cm
project the same
image for a long time.
1m
1m
The afterimage may remain on the LCD panels
by the characteristic of panel.
Do not set the projector in greasy,
wet, or smoky conditions such as IN a kitchen to prevent A Breakdown or a disaster. If The projector comes in contact with oil or chemicals, IT may become deteriorated.
READ AND KEEP THIS USER'S MANUAL FOR
LATER USE.
Safety Instructions
All the safety and operating instructions should
be read before the product is operated.
Read all of the instructions given here and retain
them for later use. Unplug this projector from
AC power supply before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for
cleaning.
Follow all warnings and instructions marked on
the projector.
For added protection to the projector during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet. This will prevent damage due to
lightning and power line surges.
Do not expose this unit to rain or use near
water... for example, in a wet basement, near a
swimming pool, etc...
Do not use attachments not recommended by
the manufacturer as they may cause hazards.
Do not place this projector on an unstable cart,
stand, or table. The projector may fall, causing
serious injury to a child or adult, and serious
damage to the projector. Use only with a cart
or stand recommended by the manufacturer, or
sold with the projector. Wall or shelf mounting
should follow the manufacturer’s instructions,
and should use a mounting kit approved by the
manufacturers.
An appliance and cart
combination should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom
of the cabinet are provided for ventilation, to
ensure reliable operation of the equipment and
to protect it from overheating.
The openings should never be covered with
cloth or other materials, and the bottom opening
should not be blocked by placing the projector
on a bed, sofa, rug, or other similar surface. This
projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in
installation such as a book case unless proper
ventilation is provided.
Never push objects of any kind into this projector
through cabinet slots as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the projector.
Do not install the projector near the ventilation
duct of air-conditioning equipment.
This projector should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supplied, consult your authorized dealer or local
power company.
Do not overload wall outlets and extension cords
as this can result in fire or electric shock. Do not
allow anything to rest on the power cord. Do
not locate this projector where the cord may be
damaged by persons walking on it.
Do not attempt to service this projector yourself
as opening or removing Covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
Unplug this projector from wall outlet and refer
servicing to qualified service personnel under
the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or
water.
d.If the projector does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions as improper adjustment
of other controls may result in damage and
will often require extensive work by a qualified
technician to restore the projector to normal
operation.
e.If the projector has been dropped or the
cabinet has been damaged.
f. When the projector exhibits a distinct change
in performance-this indicates a need for service.
When replacement parts are required, be sure
the service technician has used replacement
parts specified by the manufacturer that have
the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this
projector, ask the service technician to perform
routine safety checks to determine that the
projector is in safe operating condition.
5
Safety Instructions
WARNING
Immediately turn the power off, unplug the
projector, and contact your dealer under the
following conditions, otherwise a fire or an electric
shock may result.
– If smoke comes out from it.
– If it emits a strange odor, or makes a strange
noise.
– If lamp goes out with a loud bang.
– If water or any other liquid gets into it.
– If metal or foreign objects get inside it.
– If it is knocked down or dropped and the
cabinet is broken.
WARNING
Follow the instructions below when using the
power cable, otherwise a fire, an electric shock, or
injury may result.
– Do not place heavy objects on the power cord
or position the power cord under the projector.
Doing so may damage the power cord.
– Do not run the power cord under a carpet. As it
goes unnoticed, excessive load may be applied
on the cord unintentionally.
– Do not modify, bend forcibly, twist, or pull the
power cord.
– Do not place the power cord near heat
generating equipment or heat it.
– Do not bend, wind, or bind excessively the
power cord when using it.
– Be sure to connect the projector to a grounded
outlet. Failure to do so may result in an electric
shock.
– Do not continue to use a damaged power cord.
If the power cord is damaged, take it to your
dealer and have it replace.
– Use only the supplied power cord.
WARNING
Follow the instructions below when handling the
power plug or connector, otherwise a fire, an
electric shock, or injury may result.
– Use the projector within the voltage range
specified on the projector (AC 100 V– 240 V).
– Insert the power plug or connector into the
power outlet firmly. Do not use a damaged or
loosen power plug or connector.
– Be sure to hold the power cord plug or
connector when disconnecting it from the power
outlet. If the power cord itself is pulled, it may be
damaged.
– Do not plug or unplug the power cord with wet
hands.
– Disconnect the power cord from the power
outlet before cleaning the projector.
– Do not stick metal objects into the electrical
contacts of the power plug or connector.
6
– When an extension cord is necessary, be
sure that the total current load of all equipment
connected to the extension cord does not
exceed the specified rating of the extension
cord.
– Periodically unplug the power cord and remove
the dust that builds up on the power cord or
connector.
WARNING
Follow the instructions below to install or handle
the projector. Otherwise, a fire, an electric shock,
or injury may result.
– Do not touch the projector, power cord, or
cables when lighting begins.
– Do not use the projector in a bathroom or
shower room.
– Do not expose the projector to rain, snow, or
use near water.
– Do not insert metal objects into the projector
through the air vents.
– Do not place the containers with water on the
projector.
– Do not install in the locations exposed to oily
vapors or smoke (e.g., near a cooking table or
humidifier).
– Before moving the projector, turn the power off
and disconnect the power cord and all cables.
– Do not put spray cans in front of the exhaust
vent. When spray cans are exposed to heat, the
pressure in them will increase and explode.
– Do not open nor remove the cabinet. There are
high voltage components inside the projector.
Contact your dealer for inspection, adjustment,
and service.
– Do not attempt to disassemble the projector
(including expendable parts) or remote control
unit.
– Do not look into the lens while the projector
is used. Strong light may hurt your eyes. Be
especially careful that small children do not look
into the lens.
WARNING
Follow the instructions below when the lamp is
replaced or breaks.
– Always unplug the power cord before replacing
the lamp.
– When the lamp breaks, shards of glass may
scatter in the lamp housing. Contact your dealer
for cleaning or inspecting the projector, or
replacing the lamp.
WARNING
Follow the instructions below when handling the
batteries. Failure to do so may cause explosion,
heat generation, a fire, or leakage of the battery
fluid.
– Do not heat or disassemble the batteries, or
throw them into fire.
– Do not attempt to recharge the batteries.
Safety Instructions
– Remove the batteries when they have been
exhausted or not in use for an extended
period of time.
– Be sure to replace both batteries at the same
time. Do not mix batteries of different types.
– Insert batteries correctly according to the “+”
and “-“ markings.
– If a fluid from a battery leaks and comes in
contact with your skin, rinse the affected skin
thoroughly as soon as possible.
CAUTION
– Do not place heavy objects or step on the
projector. Be especially careful that small
children do not step on the projector. If not,
the projector may drop or break, causing
injury.
– Disconnect the power cord from the power
outlet if the projector is left unused for a long
period of time. Failure to do so may result in a
fire.
– Do not bring your hands to the peripheral part
of the exhaust vent on the cabinet. This area
becomes hot during use. Be especially careful
that small children do not touch the area.
Failure to do so may result in burn.
– Do not put metal objects in front of or near
the exhaust vent. They will become hot while
projector is being used.
– Do not place the projector on top of unstable
or slanted surfaces. The projector may fall
down and cause injury.
– Do not attach the lens cover while the
projector is being used or place any objects in
front of the lens. Failure to do so may result in
a fire.
– A buildup of dust inside the projector can
cause a fire or damage. Consult your dealer
for cleaning.
– When installing the projector to a ceiling,
consult your electrician or dealer. If the
projector is not fixed securely, accidents may
result.
CAUTION
– Never take out the lamp soon after the
projector is used. Let the projector cool for at
least 1 hour before taking out the lamp, as
burns may result.
– If the lamp replacement icon appears or the
LAMP REPLACE indicator lights orange,
immediately replace the lamp with a new one.
Otherwise, the lamp may burst.
– If the lamp burns out, the gas or dust
(containing mercury) inside the lamp may
escape from the air vents. Immediately open
the windows and ventilate the room. If you
inhale the gas or the gas gets into your eyes
or mouth, see a doctor at once.
– Dispose of a lamp containing mercury in the
same manner as fluorescent lamps according
to local regulations.
Precaution During Use
– This projector is a precision machine. Do
not subject the projector to strong shocks or
vibrations or knock it down. Remove the lens,
close the lens mounting hole with the front
cover, and retract the adjustable foot before
placing the projector into the carrying case.
The projector may be damaged if you place it
in the case without retracting the adjustable
foot.
– Place the projector into the specified case
when transporting it by courier or any other
transportation service. Consult your dealer for
the case.
– Keep space of 1 m or more at the sides of
the projector between the intake/exhaust
vents and walls. Poor ventilation may cause
malfunction.
– Do not install the projector in the locations
with heavy dust, high humidity, oily vapors, or
cigarette smoke.
A buildup of dust on the optical elements such
as lens or mirror may degrade image quality.
– Directly touching the lens may cause poor
image quality.
– If the projector is carried from a cold place
to a warm place or the room temperature is
raised rapidly, condensation may form on the
lens and mirror due to the moisture in the
atmosphere, resulting in a blurred picture.
Wait until condensation evaporates and
normal picture is shown.
– Do not install the projector in the locations
with great difference in temperature. Doing
so may cause malfunction. The ranges of the
operating and storage temperatures are as
shown below:
Operating temperature: 41˚F–95˚F [5˚C–35˚C]
Storage temperature: 10˚F–140˚F (-10˚C–
60˚C)
– Do not install the projector near high-voltage
electric power lines or power sources.
– Do not place the projector on a carpet or bed.
The internal temperature will rise, causing
malfunction.
– To avoid increase in the internal temperature,
do not block the intake/exhaust vents.
– Position the projector at a proper angle.
Incorrect positioning may cause troubles and
accidents. Do not roll the projector more than
20 degrees from the horizontal.
– Do not place any heat-sensitive objects on the
projector.
7
Safety Instructions
Installing the Projector in Proper
Position
Air Circulation
Openings in the cabinet are provided for
ventilation. To ensure reliable operation of the
product and to protect it from overheating, these
openings must not be blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken.
– Do not put any flammable object or spray can
near the projector, hot air is exhausted from the
ventilation holes.
– Keep the exhaust vent at least 3’ (1 m) away
from any objects.
– Do not touch a peripheral part of the exhaust
vent, especially screws and metallic parts.
These areas will become hot while the
projector is being used.
– Do not put anything on the cabinet. Objects put
on the cabinet will not only get damaged but
also may cause fire hazard by heat.
– Make sure that there is no object under the
projector to prevent from covering the bottom
openings.
Cooling fans are provided to cool down the
projector. The fans’ running speed is changed
according to the temperature inside the projector.
Air Intake Vent (Filter)
Install the projector properly. Improper installation
may reduce the lamp life and cause a fire hazard.
20°
20°
30°
30°
Do not roll the projector more
than 20 degrees from side to
side.
Do not pitch the projector more
than 30 degrees from above and
below.
Do not point the projector up to
project an image.
Do not point the projector down to
project an image.
Do not put the projector on either
side to project an image.
Moving the Projector
When moving the projector, retract the
adjustable foot to prevent damage to the cabinet
and use a suitable carrying case.
When this projector is not in use for an extended
period, put it into a suitable case to protect the
projector.
CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
Air Intake Vent
Exhaust Vent
(Hot air exhaust)
8
–Do not drop or bump the projector, otherwise
damages or malfunctions may result.
– When carrying the projector, use a suitable
carrying case.
– Do not transport the projector by courier or
any other transport service in an unsuitable
transport case. This may cause damage to the
projector. For information about transporting
the projector by courier or any other transport
service, consult your dealer.
– Do not put the projector in a case before the
projector is cooled enough.
Compliance
Federal Communications Commission Notice
Multimedia Projector, Model: LV-7292S, LV-7297S, LV-7392S
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions.
If such changes or modifications should be made, you could be required to stop operation of the
equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
Tel No. (516)328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
AC POWER CORD REQUIREMENT
The AC Power Cord supplied with this projector meets the requirement for use in the country you
purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that
the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be
unable to insert the plug into the outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
European Union (and EEA) only.
These symbols indicate that this product is not to be disposed of with your household waste,
according to the WEEE Directive (2002/96/EC), the Battery Directive (2006/66/EC) and/or your
national laws implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above, in accordance with the Battery
Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present
in this battery or accumulator at a concentration above an applicable threshold specified in the
Battery Directive.
This product should be handed over to a designated collection point, e.g., on an authorized onefor-one basis when you buy a new similar product or to an authorized collection site for recycling
waste electrical and electronic equipment (EEE) and batteries and accumulators. Improper
handling of this type of waste could have a possible impact on the environment and human
health due to potentially hazardous substances that are generally associated with EEE.
Your cooperation in the correct disposal of this product will contribute to the effective usage of
natural resources.
For more information about the recycling of this product, please contact your local city office,
waste authority, approved scheme or your household waste disposal service or visit
www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)
9
Part Names and Functions
① Top controls and Indicators
② Zoom Ring
③ Focus Ring
④ Infrared Remote Receiver
⑤ Projection Lens
⑥ Lens Cap
(See page 62 for attaching.)
Front
①
② ③
CAUTION
Do not turn on a projector with lens cap attached.
High temperature from light beam may damage
lens cap and result in fire hazard.
④
⑤
⑥
⑦
⑦ Air Intake Vent
CAUTION
Back
⑧
⑨
Internal fan is equipped in this projector, do not
block the Air Intake Vent, otherwise it may cause
a fire.
⑧ Lamp Cover
⑨ Terminals and Connectors
⑩ Power Cord Connector
Note:
Replace only with the same types of the supplied cords
or cables. Using improper cords or cables may cause an
electric shock or a fire.
⑪ Exhaust Vents
⑩ ⑪
Bottom
⑪

CAUTION
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
⑫
⑬
⑫ Air Intake Vent (Filter)
⑬ Adjustable Foot

Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
*Kensington is a registered trademark of ACCO
Brands Corporation.
10
Part Names and Functions
Rear Terminal
①
②
③
① CONTROL
When the projector is controlled by a
computer, connect to this jack with serial
control cable.
② COMPUTER IN /S-VIDEO IN /
COMPONENT IN
Connect output signal from a computer,
component video output, RGB scart 21pin video output or S-VIDEO output to this
terminal (pp.17-19).
③ VIDEO IN
Connect the composite video output signal
to this jack (p.18).
11
Part Names and Functions
Top Control
⑤
POWER
⑧
WARNING
④
③
⑦
LAMP REPLACE
AUTO SET
②
⑥
MENU
① OK button
–Execute the selected item (p.24).
–Zoom in or out the image in the Digital zoom
mode (p.37).
② POINT ▲▼◄► buttons
–Select an item or adjust the value in the OnScreen Menu (p.24).
–Pan the image in the Digital zoom +/- mode
(p.37).
③ AUTO SET button
Execute the setting of Auto setup (includes
Auto input and Auto PC functions) in the
setting menu (pp.26, 47).
④ POWER button
Turn the projector on or off (pp.21-23).
12
OK
①
⑤ POWER indicator
–Lights red when the projector is in stand-by
mode.
–Lights green during operations.
–Blinks green in the Power management
mode (p.51).
⑥ MENU button
Open or close the On-Screen Menu (p.24).
⑦ LAMP REPLACE indicator
Lights yellow when the projection lamp
reaches its end of life (pp.63, 70).
⑧ WARNING indicator
–Lights red when the projector detects an
abnormal condition.
–Blinks red when the internal temperature of
the projector exceeds the operating range
(pp.60, 70).
Part Names and Functions
Remote Control Unit
①
③ COMPUTER button
Select the COMPUTER input source.
(pp.29, 39)
②
④ VIDEO button
Select the VIDEO input source. (p.38)
③
⑤ S-VIDEO button
Select the S-VIDEO input source. (p.38)
⑱
④
⑰
⑤
⑥
⑦
⑯
⑧
⑮
⑨
⑭
⑬
⑫
⑩
⑪
⑥ Point ▲▼◄► buttons
– Select an item or adjust the value in the
On-Screen Menu. (p.24)
– Pan the image in the Digital zoom +/mode. (p.37)
⑦ ASPECT button
Select a screen mode. (pp.28,36-37,44-45)
⑧MENU button
Open or close the On-Screen Menu. (p.24)
⑨ FREEZE button
Freeze the picture on the screen. (p.27)
⑩ BLANK button
Temporarily turn off the image on the screen.
(p.28)
⑪ D.ZOOM +/- buttons
Zoom in and out the images. (pp.27, 37)
LV-RC07
⑫ IMAGE button
Select the image mode. (pp.28, 34, 41)
⑬ P-TIMER button
Operate the P-timer function. (pp.28, 52)
① POWER button
Turn the projector on or off. (pp.21-23)
② AUTO SET button
Execute the setting of Auto setup (includes
Auto input and Auto PC functions) in the
setting menu. (pp.26, 47)
⑭ LAMP button
Select a lamp mode. (pp.27, 54)
⑮ INFO. button
Operate the information function. (p.59)
⑯ KEYSTONE button
Correct keystone distortion. (p.26)
⑰ OK button
– Execute the selected item. (p.24)
– Zoom in or out the image in Digital zoom
mode. (p.37)
Note:
To ensure safe operation, please observe the
following precautions:
–Do not bend, drop or expose the remote control unit
to moisture or heat.
–For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any chemical material.
⑱ COMPONENT button
Select the COMPONENT input source. (p.39)
13
Part Names and Functions
Remote Control Unit Battery Installation
1
Open the battery
compartment lid.
2
Install new batteries
into the compartment.
3
Replace the
compartment lid.
Two AAA size
batteries
For correct polarity
(+ and –), be sure
battery terminals are
in contact with pins in
compartment.
WARNING
To ensure safe operation, please observe the following precautions :
●Use two (2) AAA type batteries.
●Always replace batteries in sets.
●Do not use a new battery with a used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control unit to moisture or heat.
●Do not drop the remote control unit.
●If the battery has leaked on the remote control unit, carefully wipe the case clean and install new
batteries.
●Risk of an explosion if battery is replaced by an incorrect type.
●Dispose of used batteries according to the instructions or your local disposal rule or guidelines.
Remote Control Unit Operating Range
16.4'
(5 m)
Point the remote control unit toward the projector
(Infrared Remote Receiver) when pressing the
buttons. Maximum operating range for the remote
control unit is about 16.4'(5 m) and 60 degrees in
front of the projector.
30°
30°
Remote control unit
Remote Control Code
The 2 different remote control codes (Code
1–Code 2) are assigned to this projector.
Switching the remote control codes prevents
interference from other remote control units when
several projectors or video equipment next to each
other are operated at the same time. Change the
remote control code for the projector first before
changing that for the remote control unit. See
"Remote control" in the Setting Menu on page 54.
MENU button
IMAGE button
Press and hold the MENU and IMAGE buttons
for more than five seconds to switch between
the Code 1 and Code 2. The initial code is set to
Code 1.
14
LV-RC07
Installation
Positioning the Projector
For projector positioning, see the figures below. The projector should be set perpendicularly to the
plane of the screen.
Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting
in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
(Inch Diagonal)
300"(tele )
300"(wide)
Max. Zoom
200"
150"
100"
40"
Min. Zoom
250
167
A
125
83
(Center)
B
For LV-7290, LV-7295
For LV-7292S, LV-7297S
A : B = 13:1
A:B = 6:1
Screen
Size
Screen
Size
mm
(W x(WH)x H)
mm
16:10 aspect ratio
4:3 aspect ratio
Zoom
(max)
Zoom
(max)
Zoom
(min)
Zoom
(min)
40”40”
100”
100”
150”
150”
200”
200”
300”
300”
862
x 538
813
x 610
2154
2032x x1346
1524
3231 xx2019
3048
2286
4308 xx2692
4064
3048
6462 xx 4039
6096
4572
4.0'(1.2m)
4.3’(1.30m)
10.1'(3.1m)
10.7’(3.26m)
12.1'(3.7m)
12.9’(3.92m)
15.1(4.6m)
16.1’(4.90m)
18.2'(5.5m)
19.4’(5.90m)
20.2'(6.2m)
21.5’(6.55m)
24.3'(7.4m)
25.8’(7.87m)
30.3'(9.3m)
32.3’(9.84m)
36.4'(11.1m)
38.7’(11.80m)
200”
300”
4.8'(1.5m)
5.1’(1.55m)
For LV-7392S
LV-7390
For
A :=
B 6:1
= 6:1
A:B
Screen
Size
Screen Size
(W x(W
H)x mm
H) mm
: 3 aspect
ratio
4:34aspect
ratio
Zoom
(max)
Zoom
(max)
Zoom
(min)
Zoom (min)
40”
40”
813
x 610
813
x 610
3.6’(1.1m)
3.6'(1.1m)
4.5’(1.4m)
4.5'(1.4m)
100”
100”
150”
150”
200”
300”
2032
1524
2032 x x1524
3048
2286
3048 xx2286
4064
3048
4064 xx3048
6096
4572
6096 x
x 4572
9.5’(2.9m)
9.5'(2.9m)
14.3’(4.4m)
14.3'(4.4m)
17.1’(5.2m)
17.1'(5.2m)
19.1’(5.8m)
19.1'(5.8m)
22.9’(7.0m)
22.9'(7.0m)
28.6’(8.7m)
28.6'(8.7m)
34.4’(10.5m)
34.4'(10.5m)
11.4’(3.5m)
11.4'(3.5m)
For LV-8225
A:B = 6:1
Screen Size
(W x H) mm
4 : 3 aspect ratio
40”
100”
150”
200”
300”
813 x 610
2032 x 1524
3048 x 2286
4064 x 3048
6096 x 4572
Zoom (max)
4.3'(1.30m)
10.7'(3.26m)
16.1'(4.90m)
21.5'(6.55m)
32.3'(9.84m)
Zoom (min)
5.1'(1.55m)
12.9'(3.92m)
19.4'(5.90m)
25.8(7.87m)
38.7'(11.80m)
15
Installation
Project vertically to the screen
Adjust the light axis vertically to the screen.
Note:
If the projector is too oblique to the screen, part of the
focus may be deviated.
90˚
Light axis
Screen
Adjust the Height and the Incline angle of the projected image
Projection angle can be adjusted up to 10.0
degrees with the adjustable foot.
Lift the front of the projector and push the foot
lock latch on the projector.
Release the foot lock latch to lock the adjustable
foot and rotate the adjustable foot to adjust the
position and tilt.
To retract the adjustable foot, lift the front of the
projector and push and undo the foot lock latch.
Foot Lock Latch
Adjustable Foot
Note:
Retract the adjustable foot when transporting the projector.

Tilt the projector within ±20 degrees horizontally
When moving the projector horizontally, make suer to tilt the projector within ±20 degrees, otherwise it
may result in lamp malfunction.

About the Keystone distortion adjust
The projection image will become distorted if the adjustable foot is lifted too high or the project angle is
too oblique to the screen. In these conditions, adjust the height of the support desk of the projector.
Note:
Keystone distortion of the projected image can be corrected by menu operation. (pp 26, 37, 45)

About the brightness of the room
Do not expose the screen directly to the sunlight or lamp light, because this will make the screen too
white to see the projection image clearly. When using the projector in a sufficient brightness room, slightly
lower the brightness of the room.
16
Installation
Connecting to a Computer
Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
Note:
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting cables.
Monitor
Output
VGA
cable
COMPUTER IN
/ S-VIDEO IN
/COMPONENT IN
17
Installation
Connecting to VIDEO Equipment
Cables used for connection • VIDEO Cable
• S-VIDEO Cable
• S-VIDEO-VGA Cable
Note:
U
nplug the power cords of both the projector and external
equipment from the AC outlet before connecting cables.
Video, DVD player, etc.
S-VIDEO Output
S-VIDEO
cable
S-VIDEOVGA cable
COMPUTER IN /
S-VIDEO IN
/COMPONENT IN
Note:
• See page 73 for ordering optional cables.
18
Composite VIDEO
VIDEO
cable
VIDEO IN
Installation
Connecting to COMPONENT VIDEO and SCART Equipment
Cables used for connection • Scart-VGA Cable
• COMPONENT Cable
• COMPONENT-VGA Cable
Note:
U
nplug the power cords of both the projector and external
equipment from the AC outlet before connecting cables.
Video, DVD player, etc.
RGB Scart 21pin Output
COMPONENT VIDEO Output
(Y, Pb/Cb, Pr/Cr)
COMPONENT
cable
ScartVGA
cable
COMPONENTVGA cable
COMPUTER IN / S-VIDEO IN /
COMPONENT IN
Note:
• See page 73 for ordering optional cables.
19
Installation
Using the ferrite core
Before using the AC Power Cord, attach the ferrite core (supplied) as shown below. (See below for
mounting location.)
The Power Cord with ferrite core must be used for RF interference suppression.
0.39" (10 mm)
Ferrite Core
AC Power Cord
Keep closing until it makes
a clicking sound.
Connecting the AC Power Cord
This projector uses nominal input voltages of
100-240 V AC and it automatically selects the
correct input voltage. It is designed to work with
single-phase power systems having a grounded
neutral conductor. To reduce the risk of electrical
shock, do not plug into any other type of power
system.
If you are not sure of the type of power being
supplied, consult your authorized dealer or
service center.
Connect the projector with all peripheral
equipment before turning the projector on.
Connect the AC power cord
(supplied) to the projector.
CAUTION
The AC outlet must be near this equipment
and must be easily accessible.
Note:
Unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with
the AC power cord, it is in Stand-by mode and consumes a little electric power.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC outlet side
For the U.S.A. and Canada
For Continental Europe
Ground
For the U.K.
Ground


To power cord
connector on your
projector.
20
To the AC outlet.
(120 V AC)
To the AC outlet.
(200 - 240 V AC)
To the AC outlet.
(200 - 240 V AC)
Basic Operation
Turning On the Projector
1
Complete peripheral connections (with a
computer, VCR, etc.) before turning on the
projector.
2
Connect the projector’s AC power cord into
an AC outlet. The POWER indicator lights
red. Open the lens cap.
3
Press the POWER button on the top control
or on the remote control unit. The POWER
indicator lights green and the cooling fans
start to operate. The preparation display
appears on the screen and the countdown
starts.
4
5
After the countdown, the input source that
was selected the last time and the Lamp
mode status icon (p. 54) appear on the
screen for about 4 seconds.
If there is no signal input when start on the
projector, or the current signal is missed
while operating the projector, the VIDEO/
PC selection window will be displayed on
the screen, please move the pointer to input
source desired by pressing the Point ▲▼
buttons and press the OK button. And then
follow the input signal guidance window to
correct the signal and connection.
If the projector is locked with a PIN code,
PIN code input dialog box will appear. Enter
the PIN code as instructed on the next
page.
16
The preparation display will disappear after 30
seconds.
Selected Input Source and Lamp mode
Lamp mode status
(See page 54 for Lamp mode status.)
Note:
The Filter warning and Lamp replacement icons
may appear on the screen depending on the
usage state of the projector.
PC Selection
Guidance for PC Input
Video Selection
Note:
• When the Logo select function is set to Off, the
logo will not be shown on the screen (p.48).
• When Countdown off or Off is selected in the
Display function, the preparation display will not
be shown on the screen (p.48).
• When the Auto input function is set to On 2, the
input signal will be searched automatically (p.47).
• When Off is selected in the Display function, the
VIDEO/PC selection window and the input signal
guidance window are not shown on the screen
(p.48).
Guidance for Video Input
21
Basic Operation
Enter a PIN code
Use the Point ▲▼ buttons to enter a number.
Press the Point ► button to fix the number and
move the red frame pointer to the next box. The
number changes to . If you fixed an incorrect
number, use the Point ◄ button to move the
pointer to the number you want to correct, and
then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the
pointer to “Set”. Press the OK button so that you
can start to operate the projector.
If you entered an incorrect PIN code, PIN code
and the number (    ) will turn red for
a moment. Enter the correct PIN code all over
again.
What is PIN code?
PIN (Personal Identification Number) code is a
security code that allows the person who knows
it to operate the projector. Setting a PIN code
prevents unauthorized use of the projector.
PIN Code Input Dialog Box
After the OK icon disappears,
you can operate the projector.
Note:
•If the PIN code number is not entered or wrong PIN
code number is entered within three minutes after the
PIN code dialog box appeared, the projector will be
turned off automatically.
•The “1234” is set as the initial PIN code at the factory.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no
longer be started. Take special care in setting
a new PIN code. Write down the number as a
reminder. Should the PIN code be missing or
forgotten, consult your dealer or service center.
A PIN code consists of a four-digit number. Refer
to the PIN code lock function in the Setting Menu
on pages 55-56 for locking operation of the
projector with your PIN code.
About the Power Management mode
This projector has the Power Management mode
function. When there is no signal input for more
than 30 seconds and also there is no operation to
the projector, the No signal image appears and
the countdown begins. After the countdown, the
lamp will be off. This function helps to save power
consumption and extend the lamp life. (p. 51)

Remaining Time until the lamp is off.
When set to Standby
The cooling starts when the countdown is finished and the lamp is off. During the cooling, the POWER
indicator blinks red, and do not do any operation to the projector.
The POWER indicator blinks green when the cooling is completed and it goes to the Power Management
mode. In this condition, the projection lamp will be turned on and image will be projected if the input signal
is reconnected or any button on the top control or remote control unit is pressed.
When set to Exit
The cooling starts when the countdown is finished and the lamp indicator is off. During the cooling, the
POWER indicator blinks red, and do not do any operation to the projector.
The power will be turned off and the projector goes to Standby mode when the cooling is completed.
22
Basic Operation
Turning Off the Projector
1
Press the POWER button on the top control
or on the remote control unit, and Power
off? appears on the screen.
2
Press the POWER button again to turn off
the projector. The POWER indicator starts
to blink red, and the cooling fans keep
running. (You can select the level of fans’
quietness and speed. See “Fan” on page
57.) At this time, you can unplug the AC
power cord even if the fans are still running.
3
When the projector has cooled down
enough, the POWER indicator stops
blinking and you can turn on the projector.
CAUTION
TO MAINTAIN THE LIFE OF THE LAMP,
ONCE YOU TURN THE PROJECTOR ON,
WAIT AT LEAST FIVE MINUTES BEFORE
TURNING IT OFF.
CAUTION
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN OFF
THE PROJECTOR AND LET STAND FOR
ABOUT AN HOUR IN EVERY 24 HOURS.
Power off? disappears after 4 seconds.
Direct Power Off Function
You can disconnect the power cord from the
wall outlet or turn off the breaker even during
projection without pressing the POWER
button.
Note:
• When using the Direct Power Off function,
you can not restart the projector immediately
after the power is disconnected. If the
external power supply is suddenly cut off,
the fans stop immediately. The lamp remains
high temperature and needs to be cooled.
Note:
• When the Direct power on function is set to On,
the projector will be turned on automatically by
connecting the AC power cord to an AC outlet
(p.51).
• The running speed of cooling fans is changed
according to the temperature inside the projector.
• Do not put the projector in a case before the
projector is cooled enough.
• If the WARNING indicator blinks or lights red, see
“WARNING indicator” on page 60.
• While the POWER indicator is blinking, the lamp
is being cooled down and the projector cannot be
turned on. Wait until the POWER indicator stops
blinking to turn on the projector again.
• The fan rotation will terminate directly if the AC
power cord is unplugged immediately after the
projector is turned off.
• The projector can be turned on after the POWER
indicator turns red. The waiting time to restart
will be shortened when the normal poweroff processing for fan cooling is completed,
compared with the time the AC power cord is
immediately unplugged after the power-off.
23
Basic Operation
How to Operate the On-Screen Menu
POWER
The projector can be adjusted or set via
the On-Screen Menu. The menus have a
hierarchical structure, with a main menu that is
divided into submenus, which are further divided
into other submenus. For each adjustment and
setting procedure, refer to respective sections in
this manual.
1
Press the MENU button on the top control
or the remote control unit to display the
On-Screen Menu.
2
Use the Point ▲▼ buttons to highlight or
select a main menu item. Press the Point
► or the OK button to access the submenu
items. (The selected item is highlighted in
orange.)
3
WARNING
Top Control
LAMP REPLACE
AUTO SET
POINT ▲▼◄► buttons
OK button
OK
MENU
MENU button
Remote control unit
Use the Point ▲▼ buttons to select the
desired submenu item and press the OK
button to set or access the selected item.
4
Use the Point ▲▼◄► buttons to adjust the
setting or switch between each option and
press the OK button to activate it and return
to the submenu.
5
Press the Point ◄ button to return to the
main menu. Press the MENU button to exit
the On-Screen Menu.
POINT ▲▼◄► buttons
OK button
MENU button
LV-RC07
When Main menu is selected
Point
► or OK
button
When Sub menu is selected
*

Point
◄ button
*
About the guide bar
Display the Select and Execute
buttons.
The right picture shows the Sub
menu guide bar.
24
MENU button
Close the menu screen
Point ▲▼ buttons
Select items
Point ◄ button
Go back to Main menu
OK button
Execute selected items
Point ► button
Adjust and select items
Basic Operation
Main Menu
For detailed functions of each menu, see “Menu Tree” on pages 68-69.
Main Menu
Sub-Menu
①
②
③
④
⑤
⑥
⑦
⑧
①Input
Used to select an input source from COMPUTER or VIDEO. (pp.29, 38-39)
②PC adjust
Select Auto PC, Fine sync, Total dots, Horizontal position, Vertical position, Current mode,
Clamp, Display area H, Display area V, Reset, Mode free and Store to adjust the parameters
to match with the PC input signal format. (pp.31-32)
③Image select
Used to select an image mode from among Presentation, Standard, High contrast, Cinema,
Blackboard(Green), Colorboard and User 1-4. (pp.34, 41)
④Image adjust
For Computer source, used to adjust computer image [Contrast, Brightness, Color temp.,
White balance (R/G/B), Sharpness, Gamma, Reset and Store]. (p.35)
For VIDEO source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color
temp., White balance (R/G/B), Sharpness, Gamma, Noise reduction, Progressive, Reset
and Store]. (pp.42-43)
⑤Aspect
For Computer source, used to adjust size of the image [ Normal, Full, 16:9, Zoom, True,
Custom, Custom adj., Digital zoom +/– , Keystone, Ceiling, Rear and Reset]. (pp.36-37)
For VIDEO source, used to set size of image [Normal, Full, 16:9, Zoom, Custom, Custom
adj., Keystone, Ceiling, Rear and Reset]. (pp.44-45)
⑥Setting
Used to set the projector’s operating configurations. (pp.46-58)
⑦Information
Display the input source information. (p.59)
⑧Guide
The key operation is displayed.
25
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Ring to zoom in and out.
Rotate the Focus Ring to adjust the focus of the
image.
Zoom Ring
Focus Ring
Auto Setup Function
Auto setup function is provided to automatically execute the setting of Auto setup (includes Auto input
and Auto PC functions) in the setting menu by just pressing the AUTO SET button on the top control or
the remote control unit. Refer to page 47 for the setting of the Auto setup
function.
POWER
Note:
• Fine sync, Total dots, Horizontal position and
Vertical position position of some computers
cannot be fully adjusted with the Auto PC
Adjustment function. When the image is not
provided properly with this operation, manual
adjustments are required (pp.32-33).
Top WARNING
Control
AUTO SET button
LAMP REPLACE
AUTO SET
POINT ▲▼ buttons
OK
MENU
Remote control unit
AUTO SET button
POINT ▲▼ buttons
KEYSTONE button
Keystone Correction
Press the KEYSTONE button on the remote
control unit. The Keystone dialog box appears.
Use the Point ▲▼ buttons to correct keystone
distortion. The keystone adjustment can be
stored (pp.37, 45).
Reduce the upper
width with the Point ▲
button.
26
Reduce the lower
width with the Point
▼ button.
•The white arrows indicate that there is no
correction.
•A blue arrow indicates the direction of
correction.
•An arrow disappears at the maximum
correction.
•If you press the KEYSTONE button on the
remote control unit once more while the
keystone dialog box is being displayed, the
keystone adjustment will be canceled.
•The adjustable range is limited depending on
the input signal.
LV-RC07
Basic Operation
Remote control unit Operation
Using the remote control unit for some frequently used operations is advisable. Just pressing one of
the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER, VIDEO, S-VIDEO and
COMPONENT buttons
Press the COMPUTER, VIDEO, S-VIDEO and
COMPONENT buttons on the remote control unit
to select the input source. See pages 29, 38-39
for details.
FREEZE button
Press the FREEZE button on the remote control
unit to freeze the picture on the screen. To cancel
the Freeze function, press the FREEZE button
again or press any other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Remote control unit
COMPUTER
button
VIDEO
button
COMPONENT
button
S-VIDEO
button
Fig.1
INFO. button
Display the input source information: Input,
H-sync freq., V-sync freq., Aspect, Language,
Lamp status, Lamp counter, Power
management mode, Key lock, PIN code lock,
Remote control and SERIAL NO. (p.59)
D.ZOOM buttons
Press the D.ZOOM buttons on the remote control
unit to enter to the Digital zoom +/– mode. See
page 37 for details.
INFO. button
FREEZE
button LAMP button
D.ZOOM
buttons
LV-RC07
Note:
See the next page for the description of other
buttons.
LAMP button
Press the LAMP button on the remote control
unit to select the lamp mode for changing the
brightness on the screen.
High............Brighter than the Normal mode.
Normal.......Normal brightness
Eco.............Lower brightness reduces the
lamp power consumption and
extends the lamp life.
27
Basic Operation
BLANK button
Press the BLANK button on the remote
control unit to black out the image. To restore
to normal, press the BLANK button again or
press any button. When the projected image
is captured and is set as User in the Logo
selection (p. 48), the screen changes each time
you press the BLANK button as follows.
Remote control unit
ASPECT button
P-TIMER button
BLANK button
IMAGE button
black out→ the captured image → normal
→• • • • •
LV-RC07
Note:
See the previous page for the description of other
buttons.
P-TIMER button
Press the P-TIMER button on the remote
control unit to operate the Count up/Count
down function. Refer to p.52 for detail of
Setting for the P-timer function.
To stop the count time, press the P-TIMER
button.
To restart the P-timer, press the P-TIMER
button again.
To cancel the P-timer function, press and hold
the P-TIMER button.
IMAGE button
Press the IMAGE button on the remote control
unit to select a desired image mode of the
screen. See pages 34, 41 for details.
ASPECT button
Select the screen size (See pages 36-37,
44-45 for details).
28
BLANK
Blank disappears after 4 seconds.
P-Timer
Computer Input
Input Source Selection (ANALOG PC: COMPUTER)
Direct Operation
Choose COMPUTER (ANALOG PC) by pressing the COMPUTER button on the remote control unit.
Remote control unit
COMPUTER button
COMPUTER (ANALOG PC)
COMPUTER (SCART)
Menu Operation
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Input and then press the
Point ► or the OK button.
Input Menu
LV-RC07
2
Use the Point ▲▼ buttons to select
COMPUTER and then press the OK button.
3
When COMPUTER is selected, press the
Point ► button to access the submenu
items. Use the Point ▲▼ buttons to select
the ANALOG PC input source and then
press the OK button.
COMPUTER
Note:
When the Auto input function is set to On 1 or On
2 in the Auto setup function, the input signal will
be searched automatically (p.47).
29
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers with its Multi-scan system and Auto
PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the
signal format and tunes to project a proper image without any additional settings. (Signal formats
provided in this projector are shown on page 71.)
One of the following messages may appear when:
Auto
When the projector cannot recognize
the connected signal conforming to
the provided PC systems, Auto is
displayed on the System Menu box
and the Auto PC Adjustment function
works to display proper images. If
the image is not projected properly,
a manual adjustment is required (pp.
32-33).
----
There is no signal input from the
computer. Check the connection
between your computer and the
projector. (See “Troubleshooting” on
p. 66.)
PC System Menu
Selected system in
the PC System Menu
is displayed.
Mode 1 The preset system is manually
adjusted in the PC adjust Menu. The
adjusted data can be stored in Mode
1-10 (pp. 32-33).
SVGA 1 PC Systems provided in this projector
is chosen. The projector chooses
a proper system provided in the
projector and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
PC System Menu
Customized Mode
(1–10) set in the PC
adjust Menu (pp.
32-33).
1 Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Input and then press the Point ► or
the OK button.
2 Use the Point ▲▼ buttons to select System
and then press the Point ► or the OK button.
3 Use the Point ▲▼ buttons to select the
desired system and then press the OK
button.
30
Systems in this dialog box
can be selected.
Computer Input
Auto PC Adjustment
When the image is not stable or flicker, or when the image is not in right position as inputing ANALOG
PC signal, press the AUTO SET button on the remote control unit to adjust the Fine sync, Total dots,
Horizontal position and Vertical position to obtain best display.
1
2
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select PC adjust and then press
the Point ► or the OK button.
Use the Point ▲▼ buttons to select Auto
PC and then press the OK button.
PC adjust Menu
Note:
• The adjusted parameters from the Auto PC
Adjustment can be stored in the projector. Once the
parameters are stored, the setting can be done just
by selecting a Mode (1–10) in the PC System Menu
(p.30). See also “Store” on page 33.
• The Auto PC Adjustment cannot be operated when
480i, 575i, 480p, 575p, 720p, 1035i or 1080i is
selected in the PC System Menu (p. 30).
When the image is not provided properly with Auto PC adjustment
When the image is not provided properly with Auto
PC, operate as bellows:
•Use Input menu to adjust the System mode to
match to the computer resolution. Refer to page
30 for details.
See operation example below.
Input Menu
•Use PC adjust menu to adjust the System
mode manually and store the adjusted
parameters in the Custom Mode. See page 33.
Operation Example
Resolution :1600 x 1200, Vertical Frequency: 60 Hz
1
2
3
4
5
6
Press the MENU button to display the
On-Screen Menu. Press the Point ▲▼ buttons
to select Input.
Press the Point ► button to access to
COMPUTER and then press the OK button.
Confirm the System mode displayed. If the
input signal is different from the computer
signal, operate the following steps.
Use the Point ▲▼ buttons to select System
and and press the OK button or the Point ►
button.
Use the Point ▲▼ buttons to select the input
computer signal and press the OK button.
Confirm System mode
Change System mode
Press the MENU button to exit the On-Screen
Menu and confirm the image.
Note:
• Refer to page 71 for the Compatible Computer
Specifications.
• Some signal formats may not be able to display
correctly.
• Only when input computer signal to the projector, PC
adjust will become available.
31
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this
projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those
signal formats. The projector has 10 independent memory areas to store those parameters manually
adjusted. It allows you to recall the setting for a specific computer.
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select PC adjust and then
press the Point ► or the OK button.
2
Use the Point ▲▼ buttons to select the
desired item and then press the OK button
to display the adjustment dialog box. Use
the Point ◄► buttons to adjust the setting
value.
PC adjust Menu
Fine sync
Use the Point ◄► buttons to adjust the value,
eliminating a flicker from the image displayed
(from 0 to 31).
Total dots
Use the Point ◄► buttons to adjust the
number of total dots in one horizontal period to
match your PC image.
Horizontal position
Use the Point ◄► buttons to adjust the
horizontal picture position.
Vertical position
Use the Point ◄► buttons to adjust the
vertical picture position.
Current mode
Press the OK button to show H-sync freq. and
V-sync freq. of the connected computer.
Clamp
Use the Point ◄► buttons to adjust the clamp
level. When the image has dark bars, try this
adjustment.
Display area H
Use the Point ◄► buttons to adjust the
horizontal area displayed by this projector.
Display area V
Use the Point ◄► buttons to adjust the vertical
area displayed by this projector.
Note:
• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the
PC System Menu (p.30).
32
Computer Input
Reset
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select Yes. All adjustments will return
to their previous figures.
Mode free
Mode free
To clear the stored data, select Mode free and
then press the Point ► or the OK button. Move
the highlight to the Mode that you want to clear
and then press the OK button.
This Mode has stored
parameters.
Store
To store the adjusted data, select Store and
then press the Point ► or the OK button. Move
the highlight to one of the Modes 1 to 10 in
which you want to store, and then press the OK
button.
Values of Total dots, Horizontal
position, Vertical position, Display area
H, and Display area V.
Store
Press MENU
button to close this
dialog box.
Vacant
Press OK button to
store the data.
33
Computer Input
Image Mode Selection
Direct Operation
Select the desired image mode among
Presentation, Standard, High contrast,
Cinema, Blackboard (Green), Colorboard,
User 1, User 2, User 3 and User 4 by pressing
the IMAGE button on the remote control unit.
IMAGE button
Remote control unit
Presentation
Standard
High contrast
Menu Operation
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Image select and then
press the Point ► or the OK button.
2
Cinema
Blackboard(Green)
LV-RC07
IMAGE
button
User 1
Use the Point ▲▼ buttons to select the
desired item and then press the OK button.
User 2
Presentation
For viewing pictures in a bright room.
User 3
Standard
Normal picture mode preset on the projector.
High contrast
Picture mode with improved halftone for
graphics.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected
on a blackboard. This is mainly effective on a
green colored board, not truly effective on a
black colored board.
Colorboard
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors.
Use the Point ▲▼ buttons to select
Colorboard and then press the Point ► or the
OK button to access the submenu. Press the
Point ▲▼ buttons to select items among Red,
Blue, Yellow and Green.
User 1-4
For viewing with the user preset image mode
in the Image Adjust Menu (see page 35).
34
Colorboard
User 4
Image select Menu
Computer Input
Image Adjustment
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Image adjust and then
press the Point ► or the OK button.
2
Use the Point ▲▼ buttons to select the
desired item and then press the OK button
to display the adjustment dialog box. Use
the Point ◄► buttons to adjust the setting
value.
Image Adjust Menu
Contrast
Press the Point ◄ button to decrease the
contrast; press the Point ►button to increase the
contrast (from 0 to 63).
Selected Image mode
Brightness
Press the Point ◄ button to decrease the
brightness; press the Point ►button to increase
the brightness (from 0 to 63).
Color temp.
Use the Point ◄► buttons to select the desired
Color temp. level (XLow, Low, Mid, or High).
Use the Point ◄►
buttons to adjust the
setting value.
White balance (Red / Green / Blue)
Press the Point ◄ button to lighten R/G/B tone;
press the Point ► button to deepen R/G/B tone
(from 0 to 63).
Sharpness
Press the Point ◄ button to decrease the
sharpness of the image; press the Point ►
button to increase the sharpness of the image
(from 0 to 15).
Store
Gamma
Use the Point ◄► buttons to adjust the gamma
value to obtain a better balance of contrast (from
0 to 15).
Reset
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select Yes. All adjustments will return to
their previous figures.
Store
To store the adjusted data, select Store and
press the Point ► or the OK button. Use the
Point ▲▼ buttons to select one from User 1 to
User 4 and press the OK button.
A confirmation box appears and then select Yes.
Stored data can be called up by selecting an
User (1-4) in the Image Mode Selection on page
34.
A confirmation box appears
and then select Yes.
Note:
• When White balance Red, Green or Blue is
adjusted, Color temp. will change to User.
• When Blackboard(Green) or Colorboard
is selected in Image select, Color temp. will
change to Blackboard or Colorboard.
35
Computer Input
Aspect Setting
This projector has the picture screen resize function, which enables you to customize the image size.
the MENU button to display the
1 Press
Aspect Menu
On-Screen Menu. Use the Point ▲▼
buttons to select Aspect and then press the
Point ► or the OK button.
2
Use the Point ▲▼ buttons to select the
desired item and then press the OK button .
Normal
Provide the image to fit the screen size.
Full
Provide the full screen image.
16:9
Provide the image at the 16:9 wide screen ratio.
Zoom
Scale the image proportionally to fit the entire
screen. Either side of image may go over the
screen.
True
Provide the image in its original size. When the
original image size is larger or smaller than the
screen size (1024 x 768), the projector enters
to the panning mode automatically. Use the
Point ▲▼◄► buttons to pan the image. When
adjusted, the arrows will turn blue. When reached
to the correction limits, the arrows will disappear.
Custom
Provide the last stored aspect screen
image.
Custom adj.
Adjust the screen scale and position manually
with this function. Press the Point ► button at
Custom adj. and the Custom adjustment menu
is displayed on the screen, you can use the Point
▲▼ buttons to choose the item you want to
adjust.
Scale H/V....... Adjust the Horizontal/Vertical
screen scale.
H&V................ When set to On, the aspect
ratio is fixed. The Scale V
appears dimmed and becomes
unavailable. Adjust Scale
H, then the screen scale is
automatically modified based on
the aspect ratio.
Position H/V... Adjust the Horizontal/Vertical
screen position.
Common........ Save the adjusted scale or
position to all the inputs. Press
the OK button at Common to
display a confirmation box. To
save the scale or position, press
the OK button at Yes. When
Custom is selected, the saved
scale or position is used.
Reset.............. Reset the all adjusted values.
Press the OK button at Reset
to display a confirmation box.
To reset, press the OK button at
Yes.
36
Note:
• This projector cannot display any resolution
higher than 1920 x 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to the
projector.
• The image data in other than 1024 x 768 is
modified to fit the screen size in initial mode.
• True and Digital zoom +/– are disabled and
cannot be displayed when 480i, 575i, 480p,
575p, 720p,1035i or 1080i is selected in the
PC System Menu (p. 30).
• When True is selected in the Aspect menu,
Digital zoom +/- can not be selected.
Custom adj.
Note:
• When no signal is detected, Normal is set
automatically .
• The adjustable range for Scale H/V and
Position H/V is limited depending on the input
signal.
Computer Input
Digital zoom +
Select Digital zoom +. The On-Screen Menu
disappears and D. zoom + appears. Press the
OK button to expand the image size. Use the
Point ▲▼◄► buttons to pan the image. The
Panning function can work only when the image
is larger than the screen size. A projected image
can be also expanded by pressing the D.ZOOM
+ or the OK button on the remote control unit.
Digital zoom –
Select Digital zoom –. The On-Screen Menu
disappears and D. zoom – appears. Press the
OK button to compress image size.
The projected image can be also compressed by
pressing the D.ZOOM – or the OK button on the
remote control unit.
To exit the Digital zoom +/– mode, press any
button except the D.ZOOM +/– buttons, OK and
Point buttons.
To return to the previous screen size, select a
screen size from the Screen Size Adjustment
Menu or select an input source from the Input
Source Selection Menu (see page 29) again,
or adjust the screen size with the D.ZOOM +/–
buttons.
Keystone
This function is used to adjust keystone
distortion of the projected image. Use the Point
▲▼ buttons to choose the item you want to
adjust.
Keystone
To correct keystone distortion, press the OK
button.
Keystone appears on the screen. Use the
Point ▲▼ buttons to correct keystone
distortion (p.26).
Store
To store or reset the keystone correction,
press the Point ► button.
Store...............Keep the keystone correction
even when the AC power cord
is plugged out or turning off
the projector.
Reset...............Release the keystone
correction when the AC power
cord is plugged out or turning
off the projector.
Ceiling
When this function is set to On, the picture will
be top/
bottom and left/right reversed. This function is
used to
project the image from a ceiling-mounted
projector.
Rear
When this function is set to On, the picture will
be left/right reversed. This function is used to
project the image from rear of the screen.
Reset
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select Yes. All adjustments will return
to their previous figures.
Remote control unit
POINT ▲▼◄►
buttons
OK button
D.ZOOM + button
D.ZOOM - button
Keystone
LV-RC07
Press the OK button.
Ceiling
Rear
Note:
• The minimum compression ratio is limited
depending on the input signal, when the Keystone
function is working or when the custom is selected
for the screen size.
• True and Digital zoom +/– are disabled and
cannot be displayed when 480i, 575i, 480p, 575p,
720p,1035i or 1080i is selected in the PC System
Menu (p.30).
• Digital zoom +/- cannot be selected when True is
selected.
• The minimum compression ratio is limited at
Normal screen size.
37
VIDEO Input
Input Source Selection (VIDEO, S-VIDEO)
Direct Operation
Choose VIDEO or S-VIDEO by pressing the
VIDEO or the S-VIDEO button on the remote
control unit.
Remote control unit
VIDEO button
VIDEO
S-VIDEO button
S-VIDEO
Menu Operation
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Input and then press the
Point ► or the OK button.
2
Use the Point ▲▼ buttons to select
VIDEO and then press the OK button.
VIDEO
When video input signal is
connected to the VIDEO jack, select
VIDEO.
VIDEO
LV-RC07
S-VIDEO
Use the Point ▲▼ buttons to select
COMPUTER. And then press the Point ►
button to access the submenu items. Use the
Point ▲▼ buttons to select the S-VIDEO and
then press the OK button.
S-VIDEO
When the input source is coming
from video equipment connected
to the COMPUTER IN/S-VIDEO
IN/COMPONENT IN terminal
with a S-VIDEO-VGA cable,
select S-VIDEO.
Note:
When the Auto input function is set to On 1 or On
2 in the Auto setup function, the input signal will
be searched automatically (p.47).
38
COMPUTER
Press the Point ▲▼ buttons to
select S-VIDEO.
VIDEO Input
Input Source Selection (COMPONENT, SCART)
Direct Operation
Choose COMPUTER (COMPONENT) or COMPUTER (SCART) by pressing the COMPONENT or the
COMPUTER button on the remote control unit.
Remote control unit
COMPUTER button
COMPUTER (ANALOG PC)
COMPUTER (SCART)
COMPONENT button
COMPUTER (COMPONENT)
Menu Operation
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Input and then press the Point ► or
the OK button.
2
Use the Point ▲▼ buttons to select
COMPUTER and then press the Point ►
button.
3
Use the Point ▲▼ buttons to select
COMPONENT or SCART and then press the
OK button.
Input Menu
LV-RC07
COMPONENT When the input source is coming
from video equipment connected
to the COMPUTER IN /S-VIDEO
IN/COMPONENT IN terminal
with a COMPONENT-VGA Cable,
select COMPONENT.
SCART
When the input source is coming
from video equipment connected
to the COMPUTER IN/S-VIDEO
IN/COMPONENT IN terminal
with a Scart-VGA Cable, select
SCART.
Press the Point ▲▼ buttons
to select COMPONENT or
SCART.
Note:
When the Auto input function is set to On 1
or On 2, the input signal will be searched
automatically (p.47).
39
VIDEO Input
VIDEO System Selection
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Input and then press the
Point ► or the OK button.
2
Select VIDEO, COMPUTER (S-VIDEO)
or COMPUTER (COMPONENT) input
source. (pp. 38-39)
3
Use the Point ▲▼ buttons to select
System and then press the Point ► or
the OK button. Use the Point ▲▼ buttons
to select the desired system and then
press the OK button.
AV System Menu (VIDEO or S-VIDEO)
VIDEO or S-VIDEO
Auto
The projector automatically detects an
incoming video system, and adjusts itself
to optimize its performance. When VIDEO
System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video
image, select a specific broadcast signal format
from among PAL, SECAM, NTSC, NTSC 4.43,
PAL-M and PAL-N.
COMPONENT
Auto
The projector automatically detects an
incoming video signal, and adjusts itself to
optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video
image, select a specific component video signal
format from among 480i, 575i, 480p, 575p,
720p, 1035i and 1080i.
Note:
The AV System Menu cannot be selected when
selecting SCART.
40
AV System Menu (COMPONENT)
Direct Operation
VIDEO Input
Image Mode Selection
Select the desired image mode among
Presentation, Standard, High contrast,
Cinema, Blackboard (Green), Colorboard,
User 1, User 2, User 3 and User 4 by pressing
the IMAGE button on the remote control unit.
Remote control unit
2
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Image select and then
press the Point ► or the OK button.
High contrast
Cinema
Blackboard (Green)
LV-RC07
IMAGE
button
Colorboard
User 1
Use the Point ▲▼ buttons to select the
desired item and then press the OK button.
User 2
Presentation
User 3
For viewing pictures in a bright room.
User 4
Standard
Normal picture mode preset on the projector.
High contrast
Picture mode with improved halftone for
graphics.
Presentation
Standard
Menu Operation
1
IMAGE button
Image select Menu
Cinema
Picture mode adjusted with fine
tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected
on a blackboard. This is mainly effective on a
green colored board, not truly effective on a
black colored board.
Colorboard
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors.
Use the Point ▲▼ buttons to select
Colorboard and then press the Point ► or the
OK button to access the submenu. Press the
Point ▲▼ buttons to select items among Red,
Blue, Yellow and Green.
User 1-4
For viewing with the user preset image mode in
the Image Adjust Menu (p. 43).
41
VIDEO Input
Image Adjustment
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Image adjust and then
press the Point ► or the OK button.
2
Use the Point ▲▼ buttons select the
desired item and then press the OK button
to display the adjustment dialog box. Use
the Point ◄► buttons to adjust the setting
value.
Contrast
Press the Point ◄ button to decrease the
contrast; press the Point ► button to increase
the contrast (from 0 to 63).
Image Adjust Menu
Selected Image mode
Brightness
Press the Point ◄ button to decrease the
brightness; press the Point ► button to
increase the brightness (from 0 to 63).
Color
Press the Point ◄ button decrease the
intensity of the color; press the Point ► button
increase the intensity of the color (from 0 to
63).
Tint
Press the Point ◄► buttons to adjust the tint
value to get a proper color balance (from 0 to
63).
Color temp.
Use the Point ◄► buttons to select the
desired Color temp. level (XLow, Low, Mid or
High).
Use the Point ◄► buttons to
adjust the setting value.
White balance (Red / Green / Blue)
Press the Point ◄ button to lighten R/G/B
tone; press the Point ► button to deepen
R/G/B tone (from 0 to 63).
Sharpness
Press the Point ◄ button to decrease the
sharpness of the image; press the Point ►
button to increase the sharpness of the image
(from 0 to 15).
Gamma
Use the Point ◄► buttons to adjust the
gamma value to obtain a better balance of
contrast (from 0 to 15).
Note:
• When the White balance Red, Green or Blue is adjusted, the Color temp. level will change to User.
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p. 40).
• When Blackboard (Green) or Colorboard is selected in Image select, Color temp. will change to
Blackboard or Colorboard.
42
VIDEO Input
Noise reduction
Noise interference on the screen can be
reduced. Select one of the following options to
get smoother images.
Off.........Disabled.
L 1.........Lower reduction
L 2.........Higher reduction
Progressive
An interlaced video signal can be displayed in
progressive mode. Select one of the following
options.
Off.........Disabled.
L 1.........For an active picture.
L 2.........For a still picture.
Film......For watching a film. With this function,
the projector reproduces pictures
faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select Yes. All adjustments will return
to their previous figures.
Store
Store Menu
To store the adjusted data, select Store and
press the Point ► or the OK button. Use the
Point ▲▼ buttons to select one from User 1 to
User 4 and press the OK button.
A confirmation box appears and then select
Yes. Stored data can be called up by selecting
an User (1-4) in the Image Mode Selection on
page 41.
A confirmation box
appears and then
select Yes.
Note:
Noise reduction and Progressive can not be
selected when the input signal is 480p, 575p,
720p, 1035i or 1080i (p.40).
43
VIDEO Input
Aspect Setting
This projector has the picture screen resize function, which enables you to customize the image size.
1
2
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Aspect and then press
the Point ► or the OK button.
Use the Point ▲▼ buttons to select
the desired item and then press the OK
button.
Aspect Menu
Normal
Provide the image to fit the screen size while
maintaining the aspect ratio of the input signal.
Full
Provide the full screen image.
16:9
Provide the image at the 16:9 wide
screen ratio.
Zoom
Pan the horizontal direction of the image and
cut the vertical direction of the image to fit the
screen size (16:9). Only for 4:3 video aspect
ratio signals.
Custom
Provide the last stored aspect screen
image.
Custom adj.
Adjust the screen scale and position manually with
this function.
Press the Point ► button at Custom adj. and
the Custom adjustment menu is displayed on the
screen, you can use the Point ▲▼ buttons to
choose the item you want to adjust.
Scale H/V....... Adjust the Horizontal/Vertical
screen scale.
H&V................ When set to On, the aspect ratio
is fixed. The Scale V appears
dimmed and becomes unavailable.
Adjust Scale H, then the screen
scale is automatically modified
based on the aspect ratio.
Position H/V... Adjust the Horizontal/Vertical
screen position.
Common........ Save the adjusted scale or
position to all the inputs. Press the
OK button at Common to display
a confirmation box. To save the
scale or position, press the OK
button at Yes. When Custom
is selected, the saved scale or
position is used.
Reset.............. Reset the all adjusted values.
Press the OK button at Reset to
display a confirmation box. To
reset, press the OK button at Yes.
44
Note:
• When no signal is detected, Normal is set
automatically and the Aspect adjustment menu
disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the input
signal.
VIDEO Input
Keystone
This function is used to adjust keystone
distortion of the projected image. Use the Point
▲▼ buttons to choose the item you want to
adjust.
Keystone
To correct keystone distortion, press the OK
button.
Keystone appears on the screen. Use the
Point ▲▼ buttons to correct keystone
distortion (p. 26).
Store
To store or reset the keystone correction,
press the Point ► button.
Store...........Keep the keystone correction
even when the AC power cord
is plugged out or turning off the
projector.
Reset...........Release the keystone correction
when the AC power cord is
plugged out or turning off the
projector.
Keystone
Ceiling
When this function is set to On, the picture
will be top/bottom and left/right reversed. This
function is used to project the image from a
ceiling-mounted projector.
Ceiling
Rear
When this function is set to On, the picture will
be left/right reversed. This function is used to
project the image from rear of the screen.
Rear
Press the OK button.
Reset
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select Yes. All adjustments will return
to their previous figures.
45
Setting
Setting
This projector has a Setting menu that allows you to set up the other various functions described
below.
1
Press the MENU button to display the
On-Screen Menu. Press the Point ▲▼
buttons to select Setting and press the
Point ► or the OK button to access the
submenu items.
2
Use the Point ▲▼ buttons to select the
desired item and then press the Point ► or
the OK button to access the selected item.
3
Use the Point ▲▼ buttons to select
the desired item and then press the OK
button.
Setting Menu
Language
The language used in the On-Screen Menu
is available in English, German, French,
Italian, Spanish, Portuguese, Dutch, Swedish,
Finnish, Polish, Hungarian, Romanian,
Russian, Turkish, Kazakh, Vietnamese,
Chinese, Korean, Japanese and Thai.
Menu position
This function is used to change the position of
the On-Screen Menu. Select Menu position
and press the OK button.
The Menu position changes each time you
press OK button as follows.
the center → the bottom left → the bottom right
→ the top left → the top right→.....
46
Language
Setting
Auto setup
Auto setup
This function enables Auto input and Auto PC
adjustment by pressing the AUTO SET button
on the top control or the remote control unit.
Settings for those functions can be altered as
follows:
Auto input
This function detects the input signal
automatically. When a signal is found, the search
will stop. Use the Point ▲▼ buttons to select
one of the following options.
Off........Auto input does not work.
On 1.....Auto input works under the following
situation.
–When pressing the AUTO SET button
on the top control or the remote
control unit.
On 2.....Auto input works under the following
situation.
–When turning on the projector by
pressing the POWER button on the
top control or the remote control unit.
–When pressing the AUTO SET button
on the remote control unit or the top
control.
– When the current input signal is cut
off.*
* If the Blank or Freeze function is active,
cancel it to activate the Auto input. It is
also unavailable when On-Screen menu is
displayed.
Auto PC
On.............Enables Auto PC Adjustment when
pressing the AUTO SET button on
the remote control unit or the top
control.
Off.............Disables Auto PC Adjustment.
Note:
• During Auto input is in progress, If the MENU
button or the POWER button is pressed, Auto
input will stop. If the COMPUTER button or
VIDEO or COMPONENT or S-VIDEO button is
pressed, Auto input will stop and go back to the
button's input signal.
• Auto input and Auto PC can not be set Off at the
same time.
• Fine sync, Total dots, Horizontal position and
Vertical position of some computers cannot
be fully adjusted with the Auto PC Adjustment
function. When the image is not provided properly
with this operation, manual adjustments are
required (pp. 32-33).
Note:
• While Auto input is set to On 1 or On 2, the
status of Input and Lamp are displayed every time
the signal is switched.
• Only the last selected input source can be
detected.
47
Setting
Background
Select the background screen for when no
input signal is detected. Press the Point ▲▼
buttons to switch between each option.
Blue........Project a blue background.
User........Project an image captured in the
Logo setting.
Black......Project a black background.
Display
This function decides whether to display
On-Screen Displays.
On.........................Show all the On-Screen
displays. Use this function
when you want to project
images after the lamp
becomes bright enough.
The factory default setting
is in this option.
Countdown Off....Show the input image
instead of the countdown
when turning on the
projector. Use this function
when you want to project
the image as early as
possible even when the
lamp is not bright enough.
Off.........................Hide the On-Screen
Displays except;
● On-Screen Menu.
● Power off? (p. 23)
● P-Timer display. (p. 28)
● No signal for Power
management (p. 51)
● Please wait ...
● Arrows for the True
function in the Aspect
Menu. (p. 37)
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the
screen logo with Logo select, Capture, Logo
PIN code lock and Logo PIN code change
functions.
Note:
When On is selected in the Logo PIN code lock
function, Logo select and Capture functions
cannot be selected.
Logo select
This function decides on the starting-up
display from among following options.
User........Show the image you captured.
Default....Show the factory-set logo.
Off...........Show the countdown display only.
48
Logo select
Setting
Capture
This function enables you to capture an image
being projected to use it for a starting-up display
or interval of presentations.
Capture
Select Capture and press the OK button.
A confirmation box appears and select Yes to
capture the projected image.
After capturing the projected image, go to the
Logo select function and set it to User. Then the
captured image will be displayed the next time
you turn on the projector or when you press the
BLANK button (p 28).
To cancel the capture function, select Yes in the
"Quit?" confirmation box.
Note:
• Before capturing an image, select Standard in
the Image select Menu to capture a proper image
(pp. 34, 41).
• A signal from a computer can be captured up to
panel size (1024 x 768).
• When capturing the image that has been adjusted
by the Keystone function, the adjusted data is
automatically reset and the projector captures an
image without keystone correction.
• When Logo PIN code lock function is set to On,
Logo select and Capture can not be selected.
• When starting to capture a new image, the
previously stored image is cleared even if you
cancel the capturing.
• When there is no captured image or it is
interrupted while capturing an image, User can
not be selected, you can only switch between
Default and Off.
Logo PIN code lock
This function prevents an unauthorized person
from changing the screen logo.
Logo PIN code lock
Off...........The screen logo can be changed
freely from the Logo Menu (p. 48).
On...........The screen logo cannot be changed
without a Logo PIN code.
If you want to change the Logo PIN code lock
setting, press the OK button and the Logo PIN
code dialog box appears. Enter a Logo PIN code
by following the steps below. The initial Logo
PIN code is set to “4321” at the factory.
49
Setting
Enter a Logo PIN code
Use the Point ▲▼ buttons to enter a number.
Press the Point ◄► buttons to fix the number
and move the red frame pointer to the next
box. The number changes to . If you fixed an
incorrect number, use the Point ◄► buttons
to move the pointer to the number you want to
correct, and then enter the correct number.
Repeat this step to complete entering a fourdigit number.
After entering the four-digit number, move the
pointer to Set. Press the OK button so that you
can start to operate the projector.
Enter a Logo PIN code
After a correct Logo PIN code
is entered, the following dialog
box appears.
Change the Logo PIN code lock setting
If you entered an incorrect Logo PIN code,
Logo PIN code and the number () will
turn red for a moment. Enter the correct Logo
PIN code all over again.
Change the Logo PIN code lock setting
Use the Point ▲▼ buttons to switch On or
Off, and then press the OK button to make a
choice.
Logo PIN code change
Logo PIN code can be changed to your desired
four-digit number. Press the OK button to
select Logo PIN code change. Current logo
PIN code dialog box appears, use the Point
▲▼buttons to enter the correct code. The New
Logo PIN code input dialog box appears. Set a
new Logo PIN code, confirmation box appears,
choose Yes to set the new Logo PIN code.
Be sure to note the new Logo PIN code and
keep it on hand. If you lost the number, you
could no longer change the Logo PIN code
setting.
caution:
when you have changed THE LOGO
PIn code, write down the NEW
PIN CODE as a reminder. should the LOGO pin code be lost or forgotten, the LOGO pin code setting can no longer be changed.
Note:
If you forget your Logo PIN code and unable to change
it, the Logo PIN code can be reset to the factory default
setting (4321) according to the following procedures.
When you reset the Logo PIN code, the PIN code and
Key lock will be reset, as well.
1. Unplug the AC Power Cord from the AC outlet.
2. Hold down the OK button on the projector and
connect the AC Power Cord into the outlet again.
Keep holding down the OK button until the POWER
indicator lights. The Logo PIN code returns to the
factory default setting while the Logo PIN code lock
state will remain the same as the previous set state.
50
Change the Logo PIN code
Setting
Power management mode
For reducing power consumption as well
as maintaining the lamp life, the Power
management mode function turns off the
projection lamp when the projector is not
operated for a certain period.
Select one of the following options:
Standby......... When the lamp has been fully
cooled down, the POWER
indicator changes to green
blinking. In this condition,
the projection lamp will be
turned on if the input signal
is reconnected or any button
on the top control or remote
control unit is pressed.
Exit................ When the lamp has been fully
cooled down, the power will
be turned off.
Off.................. Power management mode
function is off.
Timer............. If the input signal is
interrupted and no button
is pressed for more than 30
seconds, the timer display
with No signal appears. It
starts the countdown until the
lamp is turned off. Use the
Point ▲▼ buttons to set the
Timer (1~30min).
Power management mode
Time left before Lamp is off.
Note:
Factory default is Standby: 5 min.
Direct power on
When this function is set to On, the projector will
be automatically turned on just by connecting
the AC power cord to a wall outlet.
Note:
Be sure to turn off the projector properly (see
“Turning Off the Projector” on page 23). If
the projector is turned off in the incorrect
sequence, the Direct power on function will
not work properly.
51
Setting
Standby mode
This function can set the electric power when
the projector is standing by.
Serial....... Does not restrict functionality even
in standby mode.
Eco.......... Restricts some functions in
standby mode to reduce power
consumption.
Note:
• When selecting Serial, the cooling fans may be
running depending on the temperature inside
the projector even if the projector is turned off.
• When Eco is selected and the projector is in
Standby mode, the communication of RS-232C
serial port is not available.
X: disabled
O: enabled
Serial command
Direct power on
Eco
X
O
Serial
O
O
P-TIMER
P-timer display
P-timer
This function allows you to change the setting of
the P-timer and execute it.
Select one of the following options:
Count up........ The P-timer display 000:00
appears on the screen and the
count up starts (000:00-180:00)
Count down... The time set in the Timer setting
appears on the screen and the
countdown starts.
Timer.............. Use the Point ▲▼ buttons to set
the Timer (1-180 Min). Timer is
available in Count down only.
Factory default velue is 10 Min.
Start................ It executes the count up or count
down function. Press the OK
button at Start and the indication
changes into Stop. To stop
Count up or Count down, press
the OK button at Stop on the
screen menu, then the indication
changes into Restart. Press the
OK button at Restart to resume
Count up or Count down.
Reset.............. Reset the P-timer values.
Press the OK button at Reset to
return to the following value;
Count up ... "000:00"
Count down ... Timer that you
set
Exit................. To exit the P-timer operation.
Stop or Cancel the P-timer via Remote control unit
To stop the P-timer function, press the P-TIMER button.
To cancel the P-timer, press and hold the P-TIMER
button for a few seconds.
52
Setting
Closed Caption
Closed Caption is a printed version of the
program sound or other information displayed
on the screen. If the input signal contains closed
captions, you can turn on the feature and switch
the channels. Press the Point ▲▼ buttons to
select Off, CC1, CC2, CC3 or CC4.
If the closed caption is not clear, you can
change the text from Color to White.
Closed Caption
Press the Point ▲▼ buttons to
select Off, CC1, CC2, CC3 or CC4,
and then press the OK button.
Note:
The Closed Caption is available only under the
situation below.
• When the input signal is COMPONENT (for
adjustment only), VIDEO or S-VIDEO, and the
system is set to Auto, NTSC or 480i, the Closed
caption is available.
• If the system is set to Auto, and choose NTSC
or 480i as the input signal, the Closed caption
function will be available.
• Closed caption will be unavailable when under
other setting conditions.
• The Closed caption function is unavailable when
On-Screen menu and P-timer are displayed.
• The menu items of Closed Caption are displayed in
gray while it is not available.
53
Setting
Lamp mode
This function allows you to change brightness
of the screen.
High............Brighter than the Normal
mode.
Normal.......Normal brightness
Eco.............Lower brightness reduces the
lamp power consumption and
extends the lamp life.
Note:
• Lamp mode can not be changed for a while after
turning on the projector. Lamp needs some
time to stabilize after the power is turned on.
Stored lamp mode will be active after the lamp
is stabilized.
Remote control
This projector provides two different remote
control codes: the factory-set initial code
(Code 1) and the secondary code (Code 2).
This switching function prevents remote control
unit interference when operating several
projectors or video equipment at the same
time.
When operating the projector in Code 2, both
the projector and the remote control unit must
be switched to Code 2.
To change the code for the projector:
Select either Code 1 or Code 2 in this Setting
Menu.
To change the code for the remote control
unit:
Press and hold both the MENU and IMAGE
buttons together for 5 seconds or more. After
changing the code, make sure the remote
control unit operates properly.
Note:
• When different codes are set on the projector
and on the remote control unit, any operation
cannot be made. In that case, switch the code
on the remote control unit to fit the code on the
projector.
• If the batteries are removed from the remote
control unit for a long period of time, the remote
control code will be reset.
54
Remote control
Setting
Security (Key lock and PIN code lock)
This function allows you to use the Key lock and
PIN code lock function to set the security for the
projector operation.
Key lock
This function locks the top control and remote
control unit buttons to prevent operation by
unauthorized persons.
Select Key lock and then press the OK button,
and select the desired item by pressing the
Point ▲▼ buttons.
Key lock
..... .Unlocked.
..... .Lock the operation of the top
control. To unlock, use the remote
control unit.
..... .Lock the operation of the remote
control unit. To unlock, use the
top control.
If the top control accidentally becomes locked
and you do not have the remote control unit
nearby or there is something wrong with your
remote control unit, contact the dealer where
you purchased the projector or the service
center.
PIN code lock
This function prevents the projector from
being operated by unauthorized persons
and provides the following setting options for
security.
Off...........Unlocked.
On 1........Enter the PIN code every time
turning on the projector.
On 2........Enter the PIN code to operate
the projector once the power cord
is disconnected; as long as the
AC power cord is connected, the
projector can be operated without a
PIN code.
Whenever you change the PIN code lock
setting or the PIN code (the four-digit number),
you are required to enter the PIN code. The
“1234” is set as the initial PIN code at the
factory.
PIN code lock
When the projector is locked with
the PIN code, the Security icon
appears on the guide.
If you want to change the PIN code lock
setting, press the OK button and the PIN code
dialog box appears.
When the projector is locked with the PIN code,
the Security icon appears on the guide.
55
Setting
Enter a PIN code
Use the Point ▲▼ buttons to enter a number.
Press the Point ◄ ► buttons to fix the number
and move the red frame pointer to the next
box. The number changes to . If you fixed an
incorrect number, use the Point ◄ ► buttons
to move the pointer to the number you want to
correct, and then enter the correct number.
Enter a PIN code
Repeat this step to complete entering a fourdigit number.
After entering the four-digit number, move the
pointer to Set. Press the OK button so that you
can change the following PIN code lock setting.
Change the PIN code
If you entered an incorrect PIN code, PIN code
and the number () will turn red for a
moment. Enter the correct PIN code all over
again.
Change the PIN code lock setting
Use the Point ▲▼ buttons to select Off, On
1 or On 2, and then press the OK button to
make a choice.
OK button
Change the PIN code
The PIN code can be changed to your desired
four-digit number. Press the OK button to
select PIN code change. Pin code dialog box
appears, use the Point ▲▼ buttons to enter
the correct code. The New PIN code input
dialog box appears. Set a new PIN code.
caution:
when you have changed THE LOGO
PIn code, write down the NEW PIN
CODE as a reminder. If you forget your pin code, the projector can no longer be started.
Note:
If you forget your PIN code and unable to change it,
the PIN code can be reset to the factory default setting
(1234) according to the following procedures.
When you reset the PIN code, the Logo PIN code and
Key lock will be reset, as well.
1. Unplug the AC Power Cord from the AC outlet.
2. Hold down the OK button on the projector and
connect the AC Power Cord into the outlet again.
Keep holding down the OK button until the POWER
indicator lights. The PIN code returns to the factory
default setting while the PIN code lock state will
remain the same as the previous set state.
56
Enter current PIN code to
confirm
Enter new PIN code
Select Yes to finish the new
PIN code setting.
Setting
Fan
This function provides the following options in
the cooling fans’ operation when the projector is
turned off (p.23).
L 1..... Normal operation
L 2..... Slower, lower-sound and longish-time
than the normal operation (L 1).
Fan control
Choose the running speed of cooling fans from
the following options according to the ground
elevation under which you use the projector.
Off................ Normal
speed. Set this function
to Off when using the projector in
non-high altitude environment.
On 1............. Faster
than Off mode. Select this
mode when using the projector in
high altitudes (about 1,000 meters
to 2,000 meters above the sea
level) where the fans have less
cooling effect.
On 2............. F
aster than On 1 mode. Select this
mode when using the projector
in higher altitudes (about 2,000
meters to 3,000 meters above the
sea level) where the fans have
lesser cooling effect.
Note:
The fan noise becomes louder in On 1 and On 2.
Lamp counter reset
Video delay control
When you want to make a digital processing of a
projected image faster, set this function.
Use the Point ▲▼ buttons, select an item of Off
or On.
Note:
Noise reduction and Progressive can not be selected
when Video delay control function is set to On.
Lamp counter
Be sure to reset the Lamp replacement counter
after the lamp is replaced. (p.63)
Press the Point ▲▼ buttons to choose the
Lamp counter function and then press the Point
► or the OK button to access the submenu
items.
Lamp counter................This item shows the
total accumulated time
of the lamp usage.
Lamp counter reset.......Press the OK button to
choose Lamp counter
reset. Select Yes in
the confirmation box if
you want to reset the
lamp counter, and then
choose Yes in the
second confirmation
box to reset lamp
counter.
57
Setting
Filter counter
This function is used to set a frequency for the
filter cleaning.
Use the Point ▲▼ buttons to select Filter
counter and then press the Point ► or the OK
button to access the submenu items.
Filter counter.........Show the total
accumulated time of the
filter use timer setting.
Timer..................... To set a timer, when the
projector reaches the
time, the Filter warning
icon (Fig.1) appears on
the screen and the total
accumulated time turns
red, indicating that the filter
replacement is necessary.
Filter counter reset... After replacing the filter,
be sure to reset the timer.
The Filter warning icon will
not turn off until the filter
counter is reset. For details
about resetting the timer,
refer to “Resetting the Filter
Counter” on page 61.
Filter counter
Press the OK button to select
Timer, and then use the Point ▲▼
buttons to set the timer. Select from
(Off/2000H/3000H/4000H) depending on
the use environment.
Fig.1 Filter warning icon
Factory default
Filter warning icon appears on the screen at a
set time (Off/2000H/3000H/4000H).
Note:
• This icon also appears at turning on.
• The Filter warning icon (Fig.1) will not appear
when the Display function is set to Off (p.48),
during Freeze (p.27), or Blank (p.28).
Warning log
This function records anomalous operations
while the projector is in operation and use it
when diagnosing faults. Up to 10 warning logs
are displayed with the latest warning message
at the top of the list, followed by previous
warning messages in chronological order.
Note:
When the Factory default function is executed, all
the warning log records will be deleted.
Factory default
This function returns all setting values except
for the User logo, PIN code lock, Logo PIN
code lock, Lamp counter and Filter counter
to the factory default settings.
58
Information
Input Source Information Display
The Information Menu is used for checking the status of the image signal being projected and the
operation of the projector.
Direct Operation
Remote control unit
Press the INFO. button on the remote control
unit to display the Information Menu.
Menu Operation
Press the Point ▲▼ buttons to select the
Information. The Information Menu is displayed.
See below for displayed information.
INFO. button
Input
The selected input source is displayed.
H-sync freq.
The horizontal frequency of the input signal is
displayed in KHz, or - - - - KHz when no signal.
V-sync freq.
The vertical frequency of the input signal is
displayed in Hz, or - - - - Hz when no signal.
Numbers of Hz doubles when during Interlace.
LV-RC07
Information Menu
Aspect
The selected Screen size is displayed.
Language
The selected language is
displayed.
Lamp status
The selected lamp mode is
displayed.
Lamp counter
The cumulative lamp operating time is displayed.
Power management mode
Off, Standby or Exit, and Timer are displayed.
Key lock
The selected Key lock icon is displayed.
PIN code lock
Off or On 1 or On 2 is displayed.
Remote control
The selected remote code is displayed.
SERIAL NO.
The serial number of the projector is displayed.
The serial number is used to service the
projector.
59
Maintenance and Cleaning
WARNING indicator
The WARNING indicator shows the state of the function which protects the projector. Check the
state of the WARNING indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the
WARNING indicator is blinking red.
When the temperature inside the projector
reaches a certain level, the projector will be
automatically shut down to protect the inside of
the projector. The POWER indicator is blinking
while the projector is being cooled down. When
the projector has cooled down enough (to its
normal operating temperature), it can be turned
on again by pressing the POWER button.
Note:
The WARNING indicator continues to blink even
after the temperature inside the projector returns
to normal. When the projector is turned on again,
the WARNING indicator stops blinking.
Then check the matters below:
Top Control
POWER
WARNING
LAMP REPLACE
MENU
WARNING
blinking red
AUTO SET
OK
–Did you provide appropriate space for
the projector to be ventilated? Check the
installing condition to see if the air vents of
the projector are not blocked.
–Has the projector been installed near an AirConditioning/ Heating Duct or Vent? Move the
installation of the projector away from the duct
or vent.
–Is the filter clean? Clean the filter periodically.
The projector is shut down and the
WARNING indicator lights red.
When the projector detects an abnormal
condition, it is automatically shut down to
protect the inside of the projector and the
WARNING indicator lights red. In this case,
unplug the AC power cord and reconnect it, and
then turn the projector on once again to verify
operation. If the projector cannot be turned
on and the WARNING indicator still lights red,
unplug the AC power cord and contact the
service center.
WARNING
DO NOT LEAVE THE PROJECTOR WITH
THE AC POWER CORD CONNECTED
UNDER AN ABNORMAL CONDITION.
IT MAY RESULT IN FIRE OR ELECTRIC
SHOCK. 60
Top Control
POWER
WARNING
lights red
WARNING
LAMP REPLACE
MENU
AUTO SET
OK
Maintenance and Cleaning
Replacing the Filter
Filter prevents dust from accumulating on the optical elements inside the projector. Should the Filter
become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal
heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the
screen, replace the Filter immediately. Replace the filter by following the steps below.
Filter
Latch
1 Turn off the projector, and unplug the AC
power cord from the AC outlet.
2
Place the latch in the OPEN position and
pull out the filter in the arrow direction.
3
4
Slide the new filter (along the guide
rails. Make sure that the filter is inserted
completely.) Place the latch back in the
LOCK position.
Connect the AC power cord to the
projector and turn on the projector.
5
Reset the filter counter.
CAUTION
- Do not operate the projector with the filter
removed. Dust may accumulate on the optical
elements degrading picture quality.
- Do not put anything into the air vents. Doing so
may result in malfunction of the projector.
- Do not wash the filter with water or any other
liquid Matter. Otherwise the filter may be
damaged.
RECOMMENDATION
We recommend avoiding dusty/smoky
environments when you operate the
projector. Usage in these environments
may cause poor image quality.
When using the projector under dusty or
smoky conditions, dust may accumulate
on a lens, LCD panels, or optical elements
inside the projector degrading the quality of a
projected image. When the symptoms above
are noticed, contact your authorized dealer or
service center for proper cleaning.
LOCK
OPEN
Note:
• When replacing the
filter, it is required
a certain space to
pull out the filter
completely.
• When installing the
projector, install the
projector with keeping
a certain space for
replacing the filter.
Filter counter reset
Resetting the Filter Counter
Be sure to reset the Filter counter after cleaning
or replacing the filter.
1
2
3
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Setting and then press the Point ►
or the OK button.
Use the Point ▲▼ buttons to select Filter
counter and then press the Point ► or the
OK button. Use the Point ▲▼buttons to
select Filter counter reset and then press
the OK button. Filter counter Reset?
appears. Select Yes to continue.
Another confirmation dialog box appears,
select Yes to reset the Filter counter.
Filter counter Reset?
appears.
Select Yes, then
another confirmation
box appears.
Select Yes again
to reset the Filter
counter.
61
Maintenance and Cleaning
Attaching the Lens Cap
When moving this projector or while not using it
over an extended period of time, attach the lens
cap.
Attach the lens cap according to the following
procedures.
1
Thread the string through the hole on the
lens cap and then tie a knot in the string to
secure it in place.
2
To pass the other end of the string into the
hole on the bottom of the projector and pull
at it.
Cleaning the Projection Lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning
cloth that contains a small amount of nonabrasive camera lens cleaner, or use a lens
cleaning paper or commercially available air
blower to clean the lens.
Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents, or other harsh
chemicals might scratch the surface of the lens.
Cleaning the Projector Cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry
cleaning cloth. When the cabinet is heavily
soiled, use a small amount of mild detergent
and finish with a soft dry cleaning cloth. Avoid
using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals
might scratch the surface of the cabinet.
When the projector is not in use, put the
projector in an appropriate carrying case to
protect it from dust and scratches.
CAUTION
Do not use any flammable solvents or air
sprays on the projector and in its vicinity. The
explosion or fire hazard may occur even after
the AC power cord is unplugged because the
temperature inside the projector is extremely
high due to the lamps. In addition, there is a
risk that the internal parts may be damaged
not only by the flammable air spray but also
by the cold air.
62
Maintenance and Cleaning
Lamp Replacement
When the projection lamp of the projector
reaches its end of life, the Lamp replacement
icon appears on the screen and LAMP
REPLACE indicator lights yellow. Replace the
lamp with a new one promptly. The timing when
the LAMP REPLACE indicator should light is
depending on the lamp mode.
POWER
WARNING
Top Control
LAMP REPLACE
AUTO SET
LAMP
REPLACE
indicator
lights yellow
Lamp replacement icon
OK
MENU
Note:
• The image will be displayed for about 10 seconds.
• The Lamp replacement icon will not appear when the Display function is set to Off (p.48), during Freeze (p.27),
or Blank (p.28).
CAUTION
Allow a projector to cool for at least one hour
before you open the Lamp Cover. The inside
of the projector can become very hot.
CAUTION
CAUTION
For continued safety, replace with a lamp of the
same type. Do not drop a lamp or touch a glass
bulb! The glass can shatter and may cause
injury.
When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp
may be broken.
If replacing the lamp of a projector which has been installed on the ceiling, you should always
assume that the lamp is broken, and you should stand to the side of the lamp cover, not
underneath it. Remove the lamp cover gently. Small pieces of glass may fall out when the lamp
cover is opened. If pieces of glass get into your eyes or mouth, seek medical advice immediately.
Lamp Cover
Follow these steps to replace the lamp.
1
Unplug the AC power cord. Let the projector
cool for at least one hour.
2
3
Loosen the screw and open the lamp cover.
Loosen the three (3) screws that secure the
lamp. Lift the lamp out of the projector by
using the handles.
4
Replace the lamp with a new one and
secure the three (3) screws. Make sure that
the lamp is set properly. Close the lamp
cover and secure the screw.
5
Connect the AC power cord to the projector
and turn on the projector.
6
Reset the lamp counter.
See "Lamp Counter" on page 57.
Screw
Handles
Screw
Screw
Lamp
Screw
63
Maintenance and Cleaning
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give
the following information to the dealer.
● Model No. of your projector : LV-7292S, LV-7297S, LV-7392S,
● Replacement Lamp Type No.: LV-LP35
CAUTION
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and
properly.
Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use.
There is no guarantee of the same life for each lamp. Some lamps may fail or
terminate their life in a shorter period of time than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP
REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after
the projector has cooled down.
(Follow carefully the instructions in the Lamp Replacement section of this manual.)
Continuous use of the lamp with the LAMP REPLACE indicator lighted may
increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of
hours of use as its lifetime draws to an end. Risk of explosion may differ according
to the environment or conditions in which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE
TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately.
Contact an authorized service center for a checkup of the unit and replacement of the
lamp. Additionally, check carefully to ensure that there are no broken shards or pieces
of glass around the projector or coming out from the cooling air circulation holes. Any
broken shards found should be cleaned up carefully. No one should check the inside of
the projector except those who are authorized trained technicians and who are familiar
with projector service. Inappropriate attempts to service the unit by anyone, especially
those who are not appropriately trained to do so, may result in an accident or injury
caused by pieces of broken glass.
64
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
– Make sure you have properly connected the projector to peripheral equipment as described on
pages 17-19.
– Make sure all equipment is connected to AC outlet and the power is turned on.
–When the projector does not project an image from the connected computer, restart the computer.
Problem:
–Solutions
No power
–Plug the power cord of the projector into the AC outlet.
–See if the POWER indicator lights red.
–Wait until the POWER indicator stops blinking to turn on the
projector again. The projector can be turned on after the
POWER indicator turns red. See page 21.
–Check the WARNING indicator. If the WARNING indicator lights red, projector cannot be turned on. See page 65.
–Check the projection lamp. See page 63.
–Unlock the Key lock function for the projector. See page 55.
The initial display is not shown. – Make sure Off or Countdown off are not chosen at display
function. See page 48.
The initial display is not same – Make sure User or Off are not chosen at Logo (select)
as the default set. function. See page 48.
Input signal switches automatically.
(or does not switch automatically)
– Make sure Auto input function is adjusted properly.
See page 47.
When the projector is on and you press the input source buttons, an icon other than
the Lamp mode icon appears.
– That is the Filter warning icon. See page 55.
An icon other than Input mode – That is the Lamp replacement icon or the Filter warning icon.
or Lamp mode icon appears. See page 63 or 55.
Image is out of focus.
–Adjust focus of the projector. See page 26.
–Provide proper distance between the projector and the projection screen. See page 15.
–Check the projection lens to see if it needs cleaning.
See page 62.
–Moving the projector from a cool to warm place may result in moisture condensation on the projection lens. In such cases,
leave the projector off and wait until condensation evaporates.
Image is Left/Right reversed.
Image is Top/Bottom reversed.
Picture is not bright enough.
–Check the Ceiling/Rear function. See pages 37, 45.
–Check the Ceiling function. See pages 37, 45.
– Check if the Contrast or Brightness is adjusted properly.
See pages 35, 42.
– Check if Image mode is selected properly. See pages 34,41.
– Check the Lamp mode function. See pages 27, 54.
–Check the LAMP REPLACE indicator. If it lights, the end of lamp
life is approaching. Replace the lamp with a new one promptly.
See page 63.
65
Appendix
No image
–Check the connection between your computer or video equipment and the projector. See pages 17-19.
–See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer’s instruction manual for the setting.
–It takes about 30 seconds to display an image after turning on the projector. See page 21.
–Check the Input signal, color system, video system or computer
system mode.
–Make sure the temperature is not out of the specified Operating Temperature (41˚F–95˚F [5˚C–35˚C]).
– When Blank is operating, the image cannot be displayed. Press the BLANK button or any other button on the
remote control unit.
The color is strange.
–Check the Input signal, color system,video system or computer system mode.
–Make sure the Blackboard is not selected on Image select menu. See pages 34,41.
Some displays are not seen during the operation.
–Check the Display function. See page 48.
Auto PC adjustment function
does not work.
–Check the Input signal. Auto PC adjustment function can not work when 480p, 575p, 720p, 480i, 575i, 1035i or 1080i is selected. See page 30.
The setting does not remain –Make sure you selected Store after adjusting setting. Some after turning off power. settings can not be stored if not registered with Store. See
pages 35,43.
Power management mode
does not work.
– Power management mode function can not work while Freeze or BLANK function is running. See page 51.
Capture function does – Check the connection and the input signal to see if there is
not work.
signal.
Auto setup does not work properly.
– Make sure Off is not selected at any function of Auto setup. See page 47.
The image is distorted or runs off.
– Check PC adjust menu or Aspect menu and adjust them. See pages 32-33, 37.
PIN code dialog box appears –PIN code lock is being set. Enter a PIN code (the “1234” or at start-up. numbers you have set). See pages 22, 55-56.
66
Appendix
The Remote control unit does –Check the batteries.
not work.
–Make sure no obstruction is between the projector and remote
control.
–Make sure you are not too far from the projector when using the remote control unit. Maximum operating range is 16.4'(5 m). –Make sure the code of the remote control unit is conformed to
the projector’s code. See page 54.
–Unlock the Key lock function for the remote control unit
function. See page 55.
Indicator blinks or lights.
–Check the status of the projector with referring to "Indicators
and projector Condition". See page 70.
The exclamation mark appears – Your operation is invalid. Operate correctly.
on the screen.
Top control does not work. – The top control is not available if the top control is locked at
Key lock under Security of Setting section. See page 55.
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you
purchased the projector or the service center. Specify the model number and explain about the
problem. We will advise you how to obtain service.
67
Appendix
Menu Tree
Computer Input/VIDEO Input
Input
COMPUTER
ANALOG PC
COMPONENT
SCART
S-VIDEO
VIDEO
Image select
Presentation
Standard
High contrast
Cinema
Blackboard (Green)
Colorboard
Red/Blue/Yellow/Green
User 1
User 4
Setting
Language
Menu position
20 languages provided.
Auto setup
Auto input
Auto PC
Background
Blue/User/Black
Display
Off /On/Countdown off
Logo
Logo select
Off
Default
User
Capture
Yes/No
Logo PIN code lock
Off/On
Logo PIN code change
Power management mode
Standby
Exit
Off
Timer (1–30 Min)
Direct power on On/Off
Standby mode
P-timer
Information
Off/On 1/On 2
On/Off
Input Source Information Display
Closed Caption
Lamp mode
Eco/Serial
Count up
Count down
Timer
Start/Stop/Restart
Reset
Exit
Closed Caption Off/CC1/CC2/CC3/CC4
Color
Color/White
High/Normal/Eco
Remote control Code 1–Code 2
Security
Key lock
Off
Projector
Remote control
PIN code lock Off/On 1/On 2
PIN code change
Fan
L 1/L 2
Fan control
Off/On 1/On 2
Video delay control
Off/On
Lamp counter
Lamp counter
H
Lamp counter reset
Filter counter
Warning log
Factory default Yes/No
68
Yes/No
H
Filter counter
Off/2000H/3000H/4000H
Timer
Filter counter reset
Yes/No
Appendix
Computer Input
VIDEO Input
System (1)
System (2)
Image Adjust
Auto
1080i
1035i
720p
575p
480p
575i
480i
System (3)
Contrast
Brightness
Color
Tint
Color temp.
Red
Green
Blue
Sharpness
Gamma
Noise reduction
Progressive
Reset
Store
Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
0–63
0–63
0–63
0–63
XLow
Low
Mid
High
User
0–63
0–63
0–63
0–15
0–15
Off
L1
L2
Off
L1
L2
Film
Yes/No
User 1
SVGA 1
Mode 1
Mode 2
---* Systems displayed in the System Menu vary depending on an
input signal.
PC adjust
Store
Normal
Full
16:9
Zoom
Custom
Custom adj.
Keystone
Ceiling
Rear
Reset
Yes/No
Mode 1
Mode 10
Mode 1
Contrast
Brightness
0–63
0–63
Color temp.
XLow
Low
Mid
High
User
0–63
0–63
0–63
0–15
0–15
Yes/No
User 1
User 4
Red
Green
Blue
Sharpness
Gamma
Reset
Store
Aspect
Scale H
Scale V
H&V On/Off
Position H
Position V
Common Yes/No
Reset
Yes/No
0–31
Mode 10
Image Adjust
User 4
Aspect
Auto PC
Fine sync
Total dots
Horizontal position
Vertical position
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Normal
Full
16:9
Zoom
True
Custom
Custom adj.
Digital zoom +
Digital zoom –
Keystone
Ceiling
Rear
Reset
Scale H
Scale V
H&V
On/Off
Position H
Position V
Common Yes/No
Reset
Yes/No
69
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
POWER
red/green
Indicators
WARNING LAMP REPLACE
yellow
red
Projector Condition
The projector is off. (The AC power cord is
unplugged.)


The projector is in stand-by mode. Press the POWER
button to turn on the projector.

The projector is operating normally.

The projector is preparing for stand-by or the
projection lamp is being cooled down. The projector
cannot be turned on until cooling is completed and
the POWER indicator stops blinking.

The projector is in the Power management mode.
The lamp lights up when operating the projector, and
the projector begins to work.

The temperature inside the projector is abnormally
high. The projector cannot be turned on. When the
projector is cooled down enough and the temperature
returns to normal, the POWER indicator stops
blinking and the projector can be turned on. (The
WARNING indicator keeps blinking.)

The projector has been cooled down enough and
the temperature returns to normal. When turning on
the projector, the WARNING indicator stops blinking.
Please check the Air filter.

The projector detects an abnormal condition and
cannot be turned on. Unplug the AC power cord and
plug it again to turn on the projector. If the projector
is turned off again, unplug the AC power cord and
contact the dealer or the service center for service
and checkup. Do not leave the projector on. It may
cause an electric shock or a fire hazard.
Reaches recommended replacement time.
The icon
appearing on the top right corner of the
image indicates the replacement of the lamp.
Please replace the lamp as soon as possible.
The time before the LAMP REPLACE indicator
lighting up, depends on the operating conditions (the
state of the lamp mode).

• • • green.
• • • red
• • • yellow.
• • • off
• • • blinks green.
• • • blinks red.
 When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow.
When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 57,63)
70
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned
below and less than 140 MHz of Dot Clock.
When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLAY
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480p
575p
480i
575i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
MAC 19
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
RESOLUTION
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
768 x 575
640 x 480
768 x 576
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
H-Freq.
(KHz)
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
31.47
31.25
15.734
15.625
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
60.24
48.36
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
64.20
62.50
63.90
63.34
63.74
71.69
81.13
V-Freq.
(Hz)
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
59.88
50.00
60.00
(Interlace)
50.00
(Interlace)
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
75.08
60.00
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
77.07
75.70
86.96
(Interlace)
58.20
58.30
72.00
70.40
58.60
60.00
59.98
60.01
67.19
76.107
ON-SCREEN
DISPLAY
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
SXGA+ 1
SXGA+ 2
SXGA+ 3
MAC21
MAC
MAC
WXGA 1
WXGA 2
WXGA 3
WXGA 4
WXGA 6
WXGA 7
WXGA 8
WXGA 9
WXGA 10
WXGA 11
WXGA 12
WXGA 17
WXGA 18
WXGA 19
WXGA 20
WXGA 21
WXGA 22
WUXGA 1
WUXGA 2
WSXGA+ 1
WXGA+ 1
WXGA+ 2
UXGA 1
UXGA 2
UXGA 3
UXGA 4
720p
720p
1035i
1080i
1080i
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1400 x 1050
1400 x 1050
1400 x 1050
1152 x 870
1280 x 960
1280 x 1024
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1280 x 768
1280 x 768
1280 x 768
1280 x 800
1280 x 800
1280 x 800
1280 x 800
1280 x 800
1280 x 800
1280 x 800
1280 x 800
1280 x 768
1280 x 768
H-Freq.
(KHz)
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.97
61.85
46.43
63.79
91.146
63.97
65.35
65.12
68.68
75.00
80.00
48.36
47.70
48.36
56.16
47.776
60.289
68.633
49.600
41.200
49.702
63.98
58.289
60.044
62.790
71.553
55.993
57.675
V-Freq.
(Hz)
60.02
75.025
60.00
65.20
75.60
1920 x 1200
1920 x 1200
1680 x 1050
1440 x 900
1440 x 900
1600 x 1200
1600 x 1200
1600 x 1200
1600 x 1200
1280 x 720
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
74.556
74.038
65.290
55.935
74.918
75.00
81.25
87.5
93.75
45.00
37.50
33.75
33.75
28.125
59.885
59.950
59.954
59.887
60.000
60.00
65.00
70.00
75.00
60.00
50.00
RESOLUTION
86.00
(Interlace)
94.00
(Interlace)
60.01
72.00
66.00
86.70
(Interlace)
60.18
85.024
60.19
60.12
59.90
75.06
75.08
75.08
60.00
60.00
60.00
72.00
59.87
74.893
84.837
60.050
50.000
59.810
60.02
69.975
71.995
74.928
84.879
69.991
72.004
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
Note:
The specifications are subject to change without notice.
71
Appendix
Technical Specifications
Projector Type
Mechanical
Information
Dimensions (W x H x D)
Net Weight
Foot Adjustment
LCD Panel System
Panel
Resolution
Panel Resolution
1,024 x 768 dots
Number of Pixels
2,359,296 (1,024 x 768 x 3 panels)
Color System
Signal
SD/HD TV Signal
Compatibility
Input Scanning Frequency
Projection Image Size
(Diagonal)
Optical
Information
Throw Distance
Projection Lens
Projection Lamp
Brightness
Image
Information
Multi-media Projector
13.13” x 3.98” x 9.72” (333.5mm x 101.0mm x
247.0mm)
(Not including protrusions)
6.17 lbs (2.8 kg)
0˚ to 10˚
LV-7292S, LV-7297S: 0.55”;
LV-7392S: 0.63”
TFT Active Matrix type, 3 panels
(Lamp mode: “High” & Image
mode: “Presentation” )
Contrast ratio
(Lamp mode: “High” & Image
mode: “Presentation” )
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz
Adjustable from 40” to 300”
LV-7292S, LV-7297S: 4.3’ -38.7’ (1.3m - 11.8m)
LV-7392S: 3.6’ - 34.4’ (1.1m - 10.5m)
F 2.0 ~ 2.15 lens with f 18.38 mm ~ 22.06 mm
with manual zoom and focus
215 W
LV-7292S
LV-7297S
LV-7392S
2200lm
2600lm
3000lm
500:1
Uniformity
85%
VIDEO Input Jack
RCA Type x 1
Computer In/S-VIDEO In
Interface
Mini D-sub 15 pin x 1
/COMPONENT Input Jack
Control Port
D-sub 9 pin x 1
AC 100–120 V (3.6A Max. ), 50/60 Hz (The U.S.A and Canada)
Power
AC 100–240 V (3.6A -2.0A Max. ), 50/60 Hz (For other countries)
LV-7292S
LV-7297S
LV-7392S
Power
Lamp mode:
consumption Eco/Normal/ High
175W/218W/243W
175W/243W/263W
Standby
Power
Standby mode: Eco
0.49W
consumption
Operating Temperature
41˚F–95˚F (5 ˚C–35 ˚C)
Operating
Environment Storage Temperature
14˚F–140˚F (-10˚C–60 ˚C)
Battery
AAA Type 1.5V x 2
Operating Range
16.4' (5 m)/±30˚
Remote
control unit
Dimensions(W x H x D)
2.0" x 0.7" x 4.3" (52 mm x 18 mm x 110 mm)
Net Weight
2.37 oz (67 g) (including batteries)
72
Appendix
Accessories
User’s Manual (CD-ROM)
Important Information and Quick Start Guide
Warranty card
AC Power Cord
Remote controller and Batteries
VGA Cable
Lens Cap with String
PIN Code Label
Ferrite core
Filter Cover for Ceiling Mount
●
●
The specifications are subject to change without notice.
LCD panels are manufactured to the highest possible standards. Even though 99.99% of
the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the
characteristics of the LCD panels.
Optional Parts
The parts listed below are optionally available. When ordering those parts, specify the item name and
Model No. to the sales dealer.
Model No.
COMPONENT-VGA Cable
: LV-CA32
S-VIDEO-VGA Cable
: LV-CA33
Soft Carrying Case : LV-SC01
Remote controller : LV-RC07
Projector Attachment : LV-CL17
Ceiling Attachment
: LV-CL18
High Ceiling Attachment
: LV-CL19
Lamp
: LV-LP35
73
Appendix
Attaching the Filter Cover to the Projector
The supplied filter cover is designed for
preventing dust accumulation on the filter
when mounting the projector on the ceiling.
1
Turn over the projector.
2
Place the filter cover on the filter as the
picture shown below.
3
Attach the projector to the ceiling mount
in accordance with the instruction manuals
which come with the ceiling mount.
To Ceiling Mount
Drop-prevention Wire
(not supplied)
Hole
Filter Cover
(supplied)
Caps
Note:
• To keep the filter cover in position, be sure to
attach the drop-prevention wire by threading it
through the hole of the filter cover.
• If the LV-CL17 Projector Attachment is applied,
the supplied filter cover is unnecessary.
Projector
Front feet
Configurations of Terminals
COMPUTER IN / S-VIDEO IN/ COMPONENT IN
Terminal: Analog RGB (Mini D-sub 15 pin)
4
5
10
15
3
9
14
2
8
13
1
7
12
6
11
1
2
3
4
5
6
7
8
Red/Cr/S-C Input
Green/Y/S-Y Input
Blue/Cb/--- Input
----Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
9
10
11
12
13
14
15
+5V Power
Ground (Vert.sync.)
Ground
DDC Data
Horiz. sync. Input/Output (Composite H/V sync.)
Vert. sync.
DDC Clock
CONTROL CONNECTOR (D-sub 9 pin)
Serial
1
2
3
4
74
----RXD
TXD
-----
5
6
7
8
9
SG
-----------------
Appendix
PIN Code Protection
While the projector is locked with the PIN code.
Put the label below (supplied) on in a
prominent place of the projector's body while it
is locked with a PIN code.
75
Appendix
Dimensions
Unit: mm(inch)
Screw Holes for Ceiling Mount
Screw: M4
Depth: 12.0(0.47)
247.0(9.72)
138.0(5.43)
122.2(4.81)
80.2(3.16)
114.0(4.49)
2.9(0.11)
5.6(0.22)
4.6(0.18)
322.1(12.68)
67.3(2.65)
96.7(3.81)
99.5(3.92)
88.7(3.49)
10.0˚
126.3(4.97)
31.7(1.25) 64.6(2.54)
104.6(4.12)
85.2(3.35)
21.9(0.86)
101.0(3.98)
83.8(3.30)
28.6(1.13) 43.2(1.70)
17.1(0.67)
76
98.1(3.86)
122.3(4.48)
46.2(1.82)
3.7(0.15)
33.6(1.32) 35.9(1.41)
85.4(3.36)
195.5(7.70)
70.5(2.78) 71.7(2.82)
24.5(0.96)
71.5(2.81)
333.5(13.13)
137.3(5.41)
20.7(0.92)
40.7(1.60)
79.6(3.13)
105.6(4.16)
24.0(0.94)
CANON INC.
CANON España, S.A.
30-2, Shimomaruko 3-chome, Ohta-ku,
Tokyo 146-8501, Japan
Av. De Europa, 6 Alcobendas 28108 Madrid, Spain
U.S.A.
CANON PORTUGAL S.A.
Rua Alfredo da Silva, 14 Alfragide 2610-016
Amadora, Portugal
CANON Belgium N.V./S.A.
CANON U.S.A. INC.
Berkenlaan 3, 1831 Diegem (Mechelen), Belgium
One Canon Plaza, Lake Success, NY
11042-1198, U.S.A.
For all inquires concerning this product, call
toll free in the U.S. 1-800-OK-CANON
CANON Netherland NV
CANADA
CANON DANMARK A/S
Neptunusstraat 1, 2132 JA Hoofddorp,
The Netherlands
CANON LUXEMBOURG S.A.
Rue des Joncs 21, L-1818 Howald, Luxembourg
CANON CANADA INC. HEADQUARTERS
Knud Hoejgaards Vej 1 DK-2860 Soeborg,
Danmark
6390 Dixie Road, Mississauga, Ontario L5T
1P7, Canada
Huopalahdentie 24 PL 1 00351 Helsinki, Finland
CANON OY
CANON CANADA INC. MONTREAL BRANCH
CANON SVENSKA AB
5990, Cote-de-Liesse, Montreal Quebec H4T
1V7, Canada
CANON NORGE as
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E
7K7, Canada
For all inquiries concerning this product, call
toll free in Canada 1-800-OK-CANON
EUROPE, AFRICA & MIDDLE EAST
CANON EUROPE LTD.
Gustav III:s Boulevard 26 169 88 Solna, Sweden
Hallagerbakken 110, Postboks 33, Holmlia, 1201
Oslo, Norway
CENTRAL & SOUTH AMERICA
CANON LATIN AMERICA, INC.
703 Waterford Way, Ste. 400 Miami, FL 33126,
U.S.A.
3 The Square, Stockley Park, Uxbridge,
Middlesex, UB11 1ET United Kingdom
ASIA
CANON EUROPA N.V.
CANON (China) Co., Ltd.
Bovenkerkerweg 59-61, 1185 XB Amstelveen,
The Netherlands
15F Jinbao Building No.89 Jinbao Street,
Dongcheng District, Beijing 100005, China
CANON FRANCE S.A.S
CANON HONGKONG CO., LTD.
17, quai du President Paul Doumer, 92414
Courbevoie Cedex, France
19/F., The Metropolis Tower, 10 Metropolis Drive,
Hunghom, Kowloon, Hong Kong
CANON UK LTD.
CANON SINGAPORE PTE. LTD.
CANON DEUTSCHLAND GmbH
CANON KOREA CONSUMER IMAGING INC.
Woodhatch Reigate Surrey RH2 8BF,
United Kingdom
Europark Fichtenhain A10, 47807 Krefeld,
Germany
CANON ITALIA S.p.A.
Via Milano 8 I-20097 San Donato Milanese,
Milano, Italy
CANON Schweiz AG
1 HarbourFront Avenue, #04-01 Keppel Bay
Tower, Singapore 098632
Canon BS Tower 5F, #168-12, Samseong-dong,
Gangnam-gu, Seoul, Korea
OCEANIA
CANON AUSTRALIA PTY. LTD.
Geschaftsbereich Wiederverkauf,
Industriestrasse 12, CH-8305 Dietlikon,
Switzerland
1 Thomas Holt Drive, North Ryde, N.S.W. 2113,
Australia
CANON GMBH
Akoranga Business Park, Akoranga Drive,
Northcote, Auckland, New Zealand
Zetschegasse 11, A-1230 Wien, Austria
ML2PC
CANON NEW ZEALAND LTD.
© CANON INC. 2012