Belling Freestanding Gas HOB Service manual

1
BELLING F/S 60cms GAS
APPLIANCES
SERVICE MANUAL
2
INDEX
PRODUCT IDENTIFICATION
APPLIANCE RATING PLATE .............................................................
PAGE
3
USER GUIDE AND INSTALLATION HANDBOOK
USER GUIDE..........................................................................................
INSTALLATION INSTRUCTIONS.......................................................
TECHNICAL DATA...............................................................................
WIRING DIAGRAMS.............................................................................
PARTS LIST FSG 60DOP......................................................................
PARTS LIST FSG 60TC.........................................................................
PARTS LIST FSG 60TC LPG................................................................
4-29
30-35
36-37
38-40
48-57
58-66
67-74
REPAIR AND MAINTAINANCE
DISASSEMBLY PROCEDURES..........................................................
COMPONANT REMOVAL..................................................................
TECHNICAL SPECIFICATIONS.........................................................
FAULTFINDING GUIDES...................................................................
THIS MANUAL COVERS THE FOLLOWING MODELS :FSG 60DO
FSG 60 DOP
FSG 60TC
FSG 60TC LPG
77-85
86-93
94
96-98
3
PRODUCT IDENTIFICATION
Appliance rating plate location
The appliance rating plate is located on the right-hand side of the
front frame and also on the rear service panel
9
10
YEAR
4
1
8
MONTH
4
4
3
2
8
NUMBER OF PRODUCTION
FOR THE MONTH
4
4
4
0
0
2
8
PRODUCT IDENTIFICATION CODE
It is important that during all service calls the model and serial
numbers are recorded on all paper work.
Users Guide
& Installation
Handbook
Belling
Freestanding Gas AU
CONTENTS
Introduction
Before Using
Safety
Using the Hob
Using the Grill
Using the Ovens
Cleaning
Installation
Technical
Customer Care
Please keep this handbook for future reference, or for anyone else
who may use the appliance.
OUR WARRANTY
Should you need it . . . .
Inside the paperwork which has come with this appliance, there is a leaflet and card
explaining the terms of our extended warranty and guarantee. In order to apply for our
five year guarantee, simply fill in the details on the card and post it off, this will register
your appliance.
Should you wish to take out extended warranty, please fill in the details on the leaflet
and post this off to:
Glen Dimplex Australia
Unit 2, 205 Abbotts Road
Dandenong South
Victoria 3175
Australia
Ph: 1300 556 816
Fx: 1800 058 900
Glen Dimplex New Zealand Pty
38 Harris Road, East Tamaki
Auckland
New Zealand
Ph: 09 274 8265
Fx: 09 274 8472
If your appliance is covered by the warranty and guarantee, you will not be billed for
work undertaken should your appliance be faulty, terms and conditions do apply, so
please read through the literature carefully.
Please ensure that you have available your appliances model number and serial
number, there is a space at the back of this book for recording that information.
IMPORTANT NOTICE
Please note the cooling fan fitted to this appliance is an integral part of its safety
and functionality. When the appliance is installed care must be taken that the
cooling fans performance is not impeded by any objects coming into contact with
it. (Installation pipes, leads etc) Care must also be taken that there is sufficient air
flow at the rear of the appliance for the cooling fan to run at its optimum efficiency.
(Particularly Built In appliances) See clearance dimensions in the installation
section of the booklet. During use the Appliance must never be disconnected from
the Mains supply as this will seriously affect the safety and performance of the
appliance, particularly in relation to surface temperatures becoming hot and gas
operated parts not working efficiently. The cooling fan is designed to run on after
the control knob has been switched off to keep the front of the appliance and the
controls cool until the appliance has naturally cooled itself.
BEFORE USING THE PRODUCT
• Make sure that you have removed all
packaging and wrapping. Some of the
items inside this appliance may have
additional wrapping.
• It is advised that you turn the ovens
and/or grill on for a short while. This
will burn off any residues left from
manufacturing. There may be a smell
which accompanies this process - but this
is nothing to worry about and is harmless.
• It is recommend that you wash the
oven shelves, baking tray, grillpan and
grillpan trivet before their first use in
hot soapy water. This will remove the
protective oil coating.
SAFETY
Caution: This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
GENERAL
WARNING! -Accesible parts may become
hot during use. To avoid burns, young
children should be kept away from the
appliance.
Children should be supervised to ensure
that they do not play with the appliance.
This appliance is not intended for use by
persons (including children with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge)
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
WARNING:- Servicing should be carried out
only by authorised personnel.
• The appliance must never be
disconnected from the mains supply
during use, as this will seriously affect the
safety and performance, particularly in
relation to surface temperatures becoming
hot and gas operated parts not working
efficiently. The cooling fan (if fitted) is
designed to run on after the control knob
has been switched off.
Do not spray aerosols in the vicinity of this
appliance while it is in operation.
Do not store or use flammable liquids or
items in the vicinity of this appliance.
Do not modify this appliance.
OVEN/GRILL
✓ Always take care when removing food
from the oven as the area around the
cavity may be hot.
✓ Always use oven gloves when handling
any utensils that have been in the oven as
they will be hot.
✓ Always make sure that the oven
shelves are resting in the correct position
between two runners. Do not place the
oven shelves on top of the highest runner,
as this is not stable and can lead to
spillage or injury.
✓ Always use the Minute Minder (if fitted)
if you are leaving the oven unattended
- this reduces the risk of food burning.
✗ Do not place items on the door while it
is open.
✗ Do not wrap foil around the oven
shelves or allow foil to block the flue.
✗ Do not drape tea towels near the oven
while it is on; this will cause a fire hazard.
✗ Do not pull heavy items, such as
turkeys or large joints of meat, out
from the oven on the shelf, as they may
overbalance and fall.
✗ Do not use this appliance to heat
anything other than food items and do not
use it for heating the room.
GAS HOB
✓ Always ensure that pan bases are dry
and flat before using them on the hob.
✓ Always position pans over the centre of
the heat zone, and turn the handles to a
safe position so they cannot be knocked or
grabbed.
✓ Always use pans which are no smaller
than 100mm (4”), or larger than 250mm
(10”).
✓ Always match the size of pan to the
size heat zone – do not use large pans on
small zones or vice versa.
✓ Always make sure that the burner
caps, rings and pansupports are correctly
placed. This will prevent pans becoming
unstable while in use and ensure an
uninterrupted gas flow.
SAFETY
✗ Never use double pans, rim-based
pans, old or misshapen pans, or any pan
that is not stable on a flat surface.
✗ Never leave cooking fat, or oil,
unattended.
✗ Never use commercial simmering aids,
or heat diffusers, as they create excessive
heat and can damage the surface of the
hob.
✗ Never use the hob for any other
purpose than cooking food.
✗ Plastic cooking utensils can melt if
they come into contact with a warm hob.
Never leave them close to, or on top of
the hob.
In the event of a chip pan fire
• If your chip pan does catch fire - don’t
panic, and don’t move the pan. Serious
burns are often caused by picking up the
pan and running outside with it.
• If it is safe to do so, and you don’t
have to reach across the pan, turn off the
heat.
• Never throw water or use a fire
extinguisher.
• If you can, drape a damp cloth or
towel over the pan to smother the flames.
• Leave the pan to cool down for at least
half an hour.
✗ Never leave any heat zone alight
without a pan covering it. This causes a
fire hazard.
• If you can’t control the fire yourself,
close the door, get out and tell everybody
else to get out.
CHIP PAN FIRES
• Call the fire brigade. Don’t go back
inside whatever the reason.
What causes a chip pan fire?
• Chip pan fires start when oil of fat
overheats and catches fire, or when oil or
fat spills on to the cooker because the pan
has been filled too high.
• They can also start when wet chips are
put into hot oil, making it bubble up and
overflow.
Preventing a chip pan fire
• Never fill the pan more than a third
full with oil of fat.
• Never leave the pan alone with the
heat on - even for a few seconds.
• Ensure chips are dry before putting
them in the pan.
• Never put chips in the pan if the oil
has started smoking. Turn off the heat
and leave the oil to cool down.
USING THE HOB - GAS
• Use pans which are large enough to
avoid overflows onto the ceramic glass
hob surface.
• As soon as the water boils, turn the
cooking zones down to a lower setting;
this will help prevent pans boiling over.
• Do not leave an empty pan on a
heating zone.
• To simmer, turn the control knob to the
small flame symbol. This will ensure that
the flame is just large enough to gently
heat the contents of the pan.
• To turn off, turn the control knob
clockwise to the ‘off’ position.
• Nothing should ever be left lying on
the hob.
• Always make sure that your pans are
placed centrally on the burners and do not
allow the flame to extend over the base of
the pan.
• Pans should be placed in the centre of
the heating zone.
• Avoid the use of pans that overhang
the edges of the hotplate.
•
In the event of a power failure, or the
ignition not working, then a lighted match
or taper can be used to light the burner.
Wipe any spillage as soon as possible.
• Clean the hob top as regularly as
possible, this will prevent any build up of
grease which may be a fire hazard.
Energy Saving
• Never heat up a sealed tin of food, as
it may explode.
• Position pans centrally over the
elements.
• Do not use the hob surface for
storage.
• Only heat the amount of liquid you
need.
GAS HOB
• Once liquids have been brought to the
boil, reduce the heat setting to a simmer.
Use
• Consider using a pressure cooker if
possible.
• Vegetables cut into small pieces will
cook more quickly.
• Place your pan onto the pan supports
above the burner you wish to use.
• Use a pan which is a close match to
your element size.
• Push in and turn the selected control
knob to the full on symbol (large flame).
• Smaller elements are ideal for
simmering and stewing in smaller pans,
while the larger elements are ideal for
frying and boiling.
• If your hob has an ignition button or
switch on the fascia, press it in until your
burner lights. If your hob has automatic
ignition it will spark automatically when
you push in the control knob.
• Hold the control knob in for 15
seconds then release. If the burner fails
to light within this time, release the
control knob and wait one minute before
attempting to re-ignite.
LID
The Fold Down Lid
Caution: Glass lids may shatter when
heated. Turn off all the burners before
shutting the lid.
When opening and closing the lid, use the
cooler outer sides of the lid glass.
The lid must be opened fully, so there is no
danger of it closing while the hob is being
used.
The appliance is fitted with a safety
system, which will automatically turn off
the hot plate burner controls if they are
inadvertantly left on as the lid is closed.
The lid is not intended to be used as a
work surface, as it becomes hot when any
part of the cooker is in use, and the surface may be scratched if items with rough
or sharp surfaces are placed on it.
USING THE GRILL - GAS
Caution: Accessible parts maybe hot when the
grill is used. Young children should be kept
away.
Ignition
Open the grill door. Push in and turn the
grill control knob anticlockwise to the
“full-on” position. Hold the control knob
in for 15 seconds and press the ignition
switch (if fitted), or hold a lighted match or
taper to the burner, until the burner lights.
Do not hold the control knob in for longer
than 15 seconds. If the burner fails to light
within this time, release the control knob
and wait for one minute before attempting
further ignition.
Important: Keep the grill door open when
the grill is on. To turn off, push in the
control knob and turn it clockwise to the
“off” position.
Detachable grill pan handle
Place the handle over the edge of the grill
pan, at the narrow side edges. Slide the
handle to the centre, and locate between
the handle position indicators.
The handle should be removed from
the pan during grilling, to prevent
overheating.
The handle is designed for removing/
inserting the grill pan under the grill when
grilling.
If cleaning the grill pan when it is hot, use
oven gloves to move it. Do not use the
handle to pour hot fats from the grill pan.
Food for grilling should be positioned
centrally on the trivet.
grid
Preheating
For best cooked results, always preheat
the grill for about 3 minutes.
grill pan
handle handle position
indicators
USING THE GRILL - GAS
Aluminium foil
Using aluminium foil to cover the grill
pan, or putting items wrapped in foil
under the grill creates a fire hazard.
Using the grill
Push the grill pan towards the back of the
shelf, to position it under the grill.
Variation in grilling can be achieved by
setting the grill between the large and
small flame symbols.
Important: Never operate the grill between
the large flame and the off position.
The speed of grilling can also be
controlled by selecting a higher or lower
shelf position.
For toasting, and for grilling foods such as
bacon, sausages or steaks,use a higher
shelf position.
For thicker foods such as chops or chicken
joint pieces, use a middle to low shelf
position.
The grill trivet, inside the grill pan, can be
inverted to give a high or low position, or
it may be removed.
When you have finished grilling, check
that the control knob is returned to the off
position.
The cooling fan
When the grill is switched on, you will hear
the cooling fan come on this keeps the
fascia and control knobs of the appliance
cool during grilling. The fan may continue
to operate for a period after the grill
control has been switched off.
During oven use the fan may cycle on and
off. Should any fault occur with the cooling
fan, the appliance will require servicing.
Contact Customer Support.
USING THE GRILL - ELECTRIC (IN A GAS PRODUCT)
Caution: Accessible parts may be hot when
the grill is used - young children should be
kept away.
Open the top oven / grill door. Push in
and turn the top oven / grill control knob
clockwise to the ‘FULL ON’ position.
To switch off, turn the control knob
antclockwise to return it to the off position.
Important: The top oven / grill doormust
be fully open when the grill is used.
Preheating
For best cooked results, we recommend
that you preheat the grill for about 3
minutes.
The cooling fan
When the grill is switched on, you will hear
the cooling fan come on this keeps the
fascia and control knobs of the appliance
cool during grilling. The fan may continue
to operate for a period after the grill
control has been switched off.
During oven use the fan may cycle on and
off. Should any fault occur with the cooling
fan, the appliance will require servicing.
Contact Customer Support.
USING THE GRILL - ELECTRIC (IN A GAS PRODUCT)
Detachable grill pan handle
Using the grill
Push the grill pan towards the back of the
shelf, to position it under the grill.
grid
The speed of grilling can be controlled by
selecting a higher or lower shelf position.
For toasting, and for grilling foods such as
bacon, sausages or steaks, use a higher
shelf position.
For thicker foods such as chops or chicken
joint pieces, use a middle to low shelf
position.
grill pan
handle handle position
indicators
Place the handle over the edge of the grill
pan, at the narrow side edges. Slide the
handle to the centre, and locate between
the handle position.
The grill trivet, inside the grill pan, can be
inverted to give a high or low position, or
it may be removed.
The HIGH trivet position is suitable
fortoasting bread.
The LOW trivet position is suitable
forgrilling all types of meat & fish.
With the grill trivet removed the food is
placed directly on the base of the grill
pan - eg: when cooking whole fish or
browning dishes such as cauliflower
cheese.
The handle should be removed from
the pan during grilling, to prevent
overheating. The handle is designed for
removing / inserting the grill pan under
the grill when grilling.
If cleaning the grill pan when it is hot, use
oven gloves to move it. Do not use the
handle to pour hot fats from the grill pan.
Food for grilling should be positioned
centrally on the trivet.
When you have finished grilling, check that
the control knob is returned to the off position.
Using aluminium foil
Using aluminium foil to cover the grill
pan, or putting items wrapped in foil
under the grill creates a fire hazzard.
USING THE TOP OVEN - GAS
Using the top oven
Preheating
Ignition
Always preheat the top oven for 15
minutes. However, if the main oven
is being used at the same time, then
preheating may not be necessary. The
cooking time may need to be shortened
slightly, or the cooking temperature
adjusted, to allow for heat transfer from
the main oven to the top oven if both
ovens are used together.
Push in and turn the top oven control knob
anticlockwise to the ‘FULL ON’ position
(gas mark 9). Hold the control knob in,
and press the ignition switch or hold a
lighted match or taper to the burner, until
the burner lights. Hold the control knob
in for 15 seconds. Do not hold the control
knob in for longer that 15 seconds. If
the burner fails to light within this time,
release the control knob and wait one
minute before attempting further ignition.
Turn the control knob to the required
setting.
To switch off, return the control knob to the
off position.
Using the top oven
The top oven can be used in the same way
as the main oven, to cook the full range of
dishes, but it is a SECONDARY oven and
there are some differences.
Foods cooked in the top oven should be
in relation to the oven size. Larger dishes,
or food which may rise during cooking,
should be cooked in the main oven.
Large items, wide tins and tall items such
as rich fruit cakes should be cooked in the
main oven to obtain optimum results.
Notes:
As part of the cooking process, hot air
is expelled through a vent at the top of
the oven(s). When opening the oven
door, care should be taken to avoid any
possible contact with potentially hot air,
since this may cause discomfort to people
with sensitive skin. We recommend that
you hold the underneath of the oven door
handle.
If you are not preheating the oven, the
cooking times in the baking guide may
need to be extended, as they are based on
a preheated oven.
The oven must be preheated when
reheating frozen or chilled foods, and we
recommend preheating for yeast mixtures,
batters, soufflés and whisked sponges.
Put the oven shelves in the position
required before preheating the oven.
Oven light
Press the light button on the facia panel.
Zones of heat
The temperature at the centre of the oven
corresponds with the selected gas mark
and is slightly higher towards the top of
the oven and slightly lower towards the
oven base.
These zones of heat can be useful
as different dishes requiring different
temperatures can be cooked at the same
time, when more than one shelf is used.
The temperature at the oven base is
suitable for cooking baked vegetables,
baked fruit, milk pudding etc, and for
warming bread rolls, soup, coffee, or
ovenproof plates and dishes.
If you find that over a period of time,
the oven becomes hotter when used at a
particular gas mark, the thermostat may
need to be replaced.
USING THE TOP OVEN - GAS
Oven furniture
Slow cooking
Baking tray and roasting tins
Make sure that frozen foods are
thoroughly THAWED before cooking.
For best cooked results and even
browning, the maximum size baking trays
and roasting tins that should be used are
as follows;
Baking tray
350mm x 330mm
Roasting tin
370mm x 320mm
Position baking trays and roasting tins on
the middle of the shelves, and leave one
clear shelf position between shelves, to
allow for circulation of heat.
Oven shelves
Extra shelves may be ordered from your
local supplier.
The oven shelf must be positioned with the
upstand at the rear of the oven and facing
upwards.
The top oven shelf helps to ensure even
baking in the top oven. It has a rear
deflector fitted to it, and is not intended for
use in the main oven.
Do not slow cook joints of meat or poultry
weighing more than 2¼kg / 4½lb.
Always use the top half of the oven for
slow cooking.
For roasting joints of meat or poultry, and
for pot roasts preheat the oven to gas
mark 6 and cook for 30 minutes, then
adjust the oven control to the “S” slow
setting for the remainder of the cooking
time.
Slow cooking times will be about three
times as long as conventional cooking
times.
USING THE TOP OVEN - GAS
Top oven baking guide
Dish
Recommended
gas mark
Suggested
shelf
position
Approxiamte
cooking time
(preheated oven)
Scones
Meringues
7
“S” slow setting
top - middle
bottom
10 - 15 mins
2 - 3 hours
5
5
6
4
15 - 25 mins
20 - 30 mins
10 - 12 mins
20 - 35 mins
5
middle
middle
middle
middle
(side by side)
middle
7
6
6
6
middle
middle
middle
middle
cooking time
depends on
recipe & type
of filling
5
5
4
4
5
middle - top
middle
middle - top
middle - top
middle - top
Cakes
Small cakes
Whisked sponge
Swiss roll
Victoria sandwich
(2 x 180mm / 7” per shelf)
Genoese Sponge
(2 x 180mm / 7” per shelf)
25 - 30 mins
Pastry
Rough Puff
Flaky / Puff
Shortcrust
Flan
Biscuits
Shortbread fingers
Nut brownies
Brandy snaps
Flapjacks
Ginger nuts
Baking guide hints
The gas mark settings and times given
in the top baking guides are based on
dishes made wit block margarine. If tub
margarine is used, it may be necessary to
reduce the gas mark setting.
If a different gas mark setting to that
shown in our guide is given in a recipe,
the recipe instruction should be followed.
The cooking times given in the baking
guides are based on a preheated oven.
If you do not preheat the oven, cooking
times should be extended.
USING THE TOP OVEN - GAS
Traditional fruit cakes
Roast turkey
It should be remembered that ovens can
vary over time, therefore cooking times
can vary, making it difficult to be precise
when baking fruit cakes.
Roasting turkey involves cooking two
different types of meat - the delicate light
breast meat, which must not be allowed
to dry out, and the darker leg meat, which
takes longer to cook.
It is necessary therefore, to test the cake
before removal from the oven. Use a fine
warmed skewer inserted into the centre of
the cake. If the skewer comes out clean,
then the cake is cooked.
• Do not attempt to make Christmas
cakes larger than the oven can cope with,
you should allow at least 25mm (1 inch)
space between the oven walls and the tin.
• Always follow the temperatures
recommended in the recipe.
• To protect a very rich fruit cake during
cooking, tie 2 layers of brown paper
around the tin.
The turkey must be roasted long enough
for the legs to cook, so frequent basting
is necessary. The breast meat can be
covered once browned.
• Always make sure that the turkey is
completely thawed and that the giblets are
removed before cooking.
• Turkey should be roasted at gas mark
5 for 20 minutes per lb, plus 20 minutes,
unless packaging advises otherwise.
• The turkey can be open roasted,
breast side down, for half of the cook
time, and then turned over for the
remainder of the cooking time.
• We recommend that the cake tin is not
stood on layers of brown paper, as this
can hinder effective circulation of air.
• If the turkey is stuffed, add 5 minutes
per lb to the cooking time.
• Do not use soft tub margarine for rich
fruit cakes, unless specified in the recipe.
• If roasting turkey covered with foil, add
5 minutes per 1lb to the cooking time.
• Always use the correct size and shape
of tin for the recipe quantities.
To test if the turkey is cooked, push a fine
skewer into the thickest part of the thigh. If
the juices run clear, the turkey is cooked. If
the juices are still pink, the turkey will need
longer cooking.
Please note:- for all other Roasting guides refer to main oven section and see table.
USING THE TOP OVEN - GAS
Roasting guide
Notes:
The times given in the roasting guide are
only approximate, because the size and
age of the bird will influence cooking
times as will the shape of a joint and the
proportion of the bone.
• When cooking stuffed meat or poultry
calculate the cooking time from the total
weight of the meat plus the stuffing.
Frozen meat should be thoroughly thawed
before cooking. For large joints it is
advisable to thaw overnight.
Frozen poultry should be thoroughly
thawed before cooking. The time required
depends on the size of the bird - eg; a
large turkey may take up to 48 hours to
thaw.
Use of a trivet with a roasting tin will
reduce fat splashing and will help to keep
the oven interior clean. Alternatively, to
help reduce fat splashing, potatoes or
other vegetables can be roasted around
the meat / poultry.
• For joints cooked in foil or covered
roasters, and for lidded casseroles, add 5
minutes per 450g (1lb) to the calculated
cooking time.
• Smaller joints weighing less than
1.25kg (2½lb) may require 5 minutes per
450g (1lb) extra cooking time.
• Position the oven shelf so that the meat
or poultry is in the centre of the oven.
• It is recommended that the appliance
is cleaned after open roasting.
Cook in oven at Gas Mark 5
Approximate Cooking Time
(preheated oven)
Beef
Rare
Medium
Well done
20 minutes per 450g (1lb), plus 20 minutes
25 minutes per 450g (1lb), plus 25 minutes
30 minutes per 450g (1lb), plus 30 minutes
Lamb
Medium
Well Done
25 minutes per 450g (1lb), plus 25 minutes
30 minutes per 450g (1lb), plus 30 minutes
Pork
35 minutes per 450g (1lb), plus 35 minutes
Poultry
20 minutes per 450g (1lb), plus 20 minutes
USING THE MAIN OVEN - GAS
Using the main oven
Ignition
Push in and turn the main oven control
knob to the ‘FULL ON’ position (gas mark
9). Hold the control knob in, and press the
ignition switch or hold a lighted match or
taper to the burner, until the burner lights.
If after 15 seconds, the burner has
not lit, turn off the oven and leave the
compartment door open. Wait at least one
minute before a further attempt to ignite
the burner.
Do not hold the control knob in for more
than 15 seconds.
Turn the control knob to the required
setting.
To turn off, return the control knob to the
“off” position.
Preheat the main oven for 15 minutes.
If you are not preheating the oven, the
cooking times in the baking guides may
need to be extended, as they are based on
a preheated oven.
The oven must be preheated when
reheating frozen or chilled foods, and we
recommend preheating for yeast mixtures,
batters, soufflés and whisked sponges.
Put the oven shelves in the position
required before preheating the oven.
Oven light
Press the light button on the facia panel.
Zones of heat
The temperature at the centre of the oven
corresponds with the selected gas mark
and is slightly higher towards the top of
the oven and slightly lower towards the
oven base.
These zones of heat can be useful
as different dishes requiring different
temperatures can be cooked at the same
time, when more than one shelf is used.
The temperature at the oven base is
suitable for cooking baked vegetables,
baked fruit, milk pudding etc, and for
warming bread rolls, soup, coffee, or
ovenproof plates and dishes.
If you find that over a period of time,
the oven becomes hotter when used at a
particular gas mark, the thermostat may
need to be replaced.
Oven furniture
Baking tray and roasting tins
For best cooked results and even
browning, the maximum size baking trays
and roasting tins that should be used are
as follows;
Baking tray
350mm x 330mm
Roasting tin
370mm x 320mm
Position baking trays and roasting tins on
the middle of the shelves, and leave one
clear shelf position between shelves, to
allow for circulation of heat.
Oven shelves
Extra shelves may be ordered from your
local supplier.
The oven shelf must be positioned with the
upstand at the rear of the oven and facing
upwards.
Slow cooking
Make sure that frozen foods are
thoroughly THAWED before cooking.
Do not slow cook joints of meat or poultry
weighing more than 2¼kg / 4½lb.
Always use the top half of the oven for
slow cooking.
USING THE MAIN OVEN - GAS
For roasting joints of meat or poultry, and
for pot roasts preheat the oven to gas
mark 6 and cook for 30 minutes, then
adjust the oven control to the “S” slow
setting for the remainder of the cooking
time.
Slow cooking times will be about three
times as long as conventional cooking
times.
Main oven baking guide
Dish
Recommended Suggested shelf
gas mark
position
Approximate
cooking time
(preheated oven)
Scones
Meringues
7
“S” slow set
middle - top
bottom
8 - 15 mins
2 - 3 hours
5
5
6
4
middle - top
middle - top
middle - top
middle - top
15 - 25 mins
20 - 25 mins
10 - 12 mins
20 - 30 mins
4
3
3
2 or 3
middle
middle
middle
middle - top
20 - 30 mins
1 - 1¼ hours
1 - 1¼ hours
2½ - 3 hours
1 or 2
bottom
Cakes
Small cakes
Whisked sponge
Swiss roll
Victoria sandwich
(2 x 180mm / 7”)
Genoese sponge
Madeira (180mm / 7”)
Gingerbread
Semi rich fruit cake
(205mm / 8”)
Christmas cake
(205mm / 8”)
Dundee cake (205mm / 8”)
3
depending on
recipe
middle - bottom 2 - 2½ hours
Pastry
Rough Puff
Flaky / Puff
Shortcrust
Flan
7
6
6
6
middle - top
middle - top
middle - top
middle - top
Cooking time
depends on
recipe and type
of filling
Biscuits
Nut brownies
Brandy snaps
Flapjacks
Gingernuts
5
4
4
4
middle - top
middle - top
middle - top
middle - top
25 - 35 mins
10 - 12 mins
20 - 25 mins
10 - 20 mins
USING THE MAIN OVEN - GAS
Traditional fruit cakes
It should be remembered that ovens can
vary over time, therefore cooking times
can vary, making it difficult to be precise
when baking fruit cakes.
It is necessary therefore, to test the cake
before removal from the oven. Use a fine
warmed skewer inserted into the centre of
the cake. If the skewer comes out clean,
then the cake is cooked.
• Do not attempt to make Christmas
cakes larger than the oven can cope with,
you should allow at least 25mm (1 inch)
space between the oven walls and the tin.
• Always follow the temperatures
recommended in the recipe.
• To protect a very rich fruit cake during
cooking, tie 2 layers of brown paper
around the tin.
• We recommend that the cake tin is not
stood on layers of brown paper, as this
can hinder effective circulation of air.
• Do not use soft tub margarine for rich
fruit cakes, unless specified in the recipe.
• Always use the correct size and shape
of tin for the recipe quantities.
Roast turkey
Roasting turkey involves cooking two
different types of meat - the delicate light
breast meat, which must not be allowed
to dry out, and the darker leg meat, which
takes longer to cook.
The turkey must be roasted long enough
for the legs to cook, so frequent basting
is necessary. The breast meat can be
covered once browned.
• Always make sure that the turkey is
completely thawed and that the giblets are
removed before cooking.
• Turkey should be roasted at gas mark
5 for 20 minutes per lb, plus 20 minutes,
unless packaging advises otherwise.
• The turkey can be open roasted,
breast side down, for half of the cook
time, and then turned over for the
remainder of the cooking time.
• If the turkey is stuffed, add 5 minutes
per lb to the cooking time.
• If roasting turkey covered with foil, add
5 minutes per 1lb to the cooking time.
To test if the turkey is cooked, push a fine
skewer into the thickest part of the thigh. If
the juices run clear, the turkey is cooked. If
the juices are still pink, the turkey will need
longer cooking.
USING THE MAIN OVEN - GAS
Notes:
Roasting guide
The times given in the roasting guide are
only approximate, because the size and
age of the bird will influence cooking
times as will the shape of a joint and the
proportion of the bone.
Frozen meat should be thoroughly thawed
before cooking. For large joints it is
advisable to thaw over night.
Frozen poultry should be thoroughly
thawed before cooking. The time required
depends on the size of the bird - eg; a
large turkey may take up to 48 hours to
thaw.
Use of a trivet with a roasting tin will
reduce fat splashing and will help to keep
the oven interior clean. Alternatively, to
help reduce fat splashing, potatoes or
other vegetables can be roasted around
the meat / poultry.
• When cooking stuffed meat or poultry
calculate the cooking time from the total
weight of the meat plus the stuffing.
• For joints cooked in foil or covered
roasters, and for lidded casseroles, add 5
minutes per 450g (1lb) to the calculated
cooking time.
• Smaller joints weighing less than
1.25kg (2½lb) may require 5 minutes per
450g (1lb) extra cooking time.
• Position the oven shelf so that the meat
or poultry is in the centre of the oven.
• It is recommended that the appliance
is cleaned after open roasting.
Cook in oven at Gas Mark 5
Approximate Cooking Time
(preheated oven)
Beef
Rare
Medium
Well done
20 minutes per 450g (1lb), plus 20 minutes
25 minutes per 450g (1lb), plus 25 minutes
30 minutes per 450g (1lb), plus 30 minutes
Lamb
Medium
Well Done
25 minutes per 450g (1lb), plus 25 minutes
30 minutes per 450g (1lb), plus 30 minutes
Pork
35 minutes per 450g (1lb), plus 35 minutes
Poultry
20 minutes per 450g (1lb), plus 20 minutes
USING THE PROGRAMMER / CLOCK - GAS (if fitted)
The programmer buttons
Setting the minute minder
The ‘function’ button in the centre is used
for setting the minute minder and setting
up the automatic cooking. See below for
details.
To set the time of day
When the power is turned on to the appliance, the time of day starts from 0.00.
Press and release the
(minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the
and
buttons while the ‘dot’ beween the hours
and minutes is flashing.
To select an alarm tone
Press and hold the
(minus) button
to listen to the first tone. Release the
button and press it again to listen to the
second tone, etc. Releasing the button
after the tone has sounded will
automatically select that tone.
Press and release the function button. The
minute minder bell symbol will appear
and flash on the display. Use the plus and
minus buttons to set the required alarm
time. After setting, the display will revert to
show the time of day and the bell symbol
will stop flashing. Pressing the function
button will display the minutes remaining.
If the time has counted down to the last
minue, the remaining seconds are shown.
The tone will sound at the end of the time
set. To cancel the tone, press the function
button.
USING THE PROGRAMMER / CLOCK - GAS (if fitted)
Semi-automatic cooking
This clock funcion can be used when you
have started cooking a meal or a dish in
the oven and want to set the time for the
oven to switch off.
Press and release the function button
twice. The display will show the oven symbol flashing and also the A (auto) symbol
is shown. Use the plus and minus buttons to set the display to show the length
of cooking time required (eg, 2 hours *).
After setting, the display will revert to show
the time of day and the oven and auto
symbols will be shown in the display.
The function button can be pressed and
released twice to show how much cooking time remains on the clock. At the end
of the cooking time, the alarm will sound
and the oven will automatically switch off.
To switch off the alarm, press the function
button. If you wish to cancel the remaining cooking time on the clock before the
alarm sounds, press the minus button until
the display returns to 0.00.
NOTE - the minute minder function can
be used independantly from other timer
functions. Eg. it is still possible to use
the minute minder facility during a semi
automatic cooking function. When both
programs are running simultaneaously,
both the semi automatic indicator A, and
oven symbol will be displayed alongside
the minute minder bell indicator in the
time of day display.
* As shown
USING THE MINUTE MINDER (if fitted)
Setting the minute minder
%$#$3$.
1. Press and release the plus button to
change the display from clock to minute
minder - the bell symbol will light.
&
0
The digital timer enables you to set the
time of day (24 hour clock) and the minute
minder alarm.
Setting the “Time of Day”
1. Switch on the electricity supply to the
appliance.
The display will flash.
2. Press and release the time of day
button.
3. Set the time of day with the plus and
minus buttons.
4. The time will be set 7 seconds after the
last plus or minus operation.
Alarm tones
After setting the time of day, you can select
one of three alarm tones.
Press the minus button to listen to the first
tone, then release the minus button and
press it again to listen to the second tone,
etc.
Releasing the minus button after a tone
has sounded will automatically select that
tone.
2. Use the plus and minus buttons to set
the length of time before the alarm tone
will sound. The display will increase /
decrease in units of 10 seconds up to 99
minutes 50 seconds, and in units of 1
minute from 1 hour 40 minutes upwards.
The maximum period which may be set is
10 hours.
The display format will change after 99
minutes and 50 seconds to 1 hour and 40
minutes.
During countdown, the minute minder has
priority on the display, which will show (in
minutes : seconds, or hours : minutes) the
time remaining.
When countdown is complete, the tone will
sound for 7 minutes, or it can be reset with
one touch of any button.
To cancel the minute minder at any other
time, run down the set time with the minus
button.
The display will revert to show the time of
day.
CLEANING
GENERAL
• It is important to clean the product
regularly as a build up of fat can affect
its performance or damage it and may
invalidate your guarantee.
• Always switch off your appliance and
allow it to cool down before you clean any
part of it.
• Do not use undiluted bleaches,
products containing chlorides, wire wool
or abrasive cleaners on aluminium,
stainless steel, or plastic / painted parts
as they can damage the appliance. Nylon
pads can also be unsuitable.
• Take extra care when cleaning over
symbols on fascia panels. Excessive
cleaning can lead to the symbols fading.
Painted & Plastic parts
• Only use a clean cloth wrung out in
hot soapy water.
• Do not use abrasive cleaners, such
as “Cif”, wire or nylon cleaning pads on
these parts.
Stainless steel & Aluminium surfaces
• Only use a clean cloth wrung out in
hot soapy water, and dry with a soft cloth.
• Stubborn marks can be removed using
a stainless steel cleaner. Supplies can
be purchased from the Customer Care
Centre.
• Sharp objects can mark the surface
of stainless steel, but will become less
noticeable with time.
• Wipe any spillage immediately, taking
care to avoid burning your hands.
• Some foods are corrosive eg; vinegar,
fruit juices and especially salt - they can
mark or damage the metal if they are left
on the surface.
• Baby oil can be used to restore
stainless steel finishes - but only use a
few drops. Don’t use cooking oils as they
can contain salts, which will damage the
metal.
•
Do not use steam cleaners.
Enamel surfaces & parts
• Clean with warm, soapy water and a
clean cloth.
• If larger splashes of fat do not readily
disappear, you can use a mild cream
cleaner to remove them. More stubborn
marks can be removed using a soap filled
pad.
• Rinse well and dry with a soft clean
towel or cloth.
•
Do not use steam cleaners.
Glass parts
• Only use a clean cloth wrung out
in hot soapy water, or a specialist glass
cleaner.
• Rinse away any excess cleaner and dry
with a soft cloth.
• Do not use abrasives or polishes as
they will scratch and damage the glass.
Chrome plated parts
• Use a moist soap filled pad, or place
in a dishwasher.
REMOVING OVEN PARTS FOR CLEANING
Inner Door Glass
• The inner door glass panel can be
removed for cleaning but it must be
replaced the right way up. If there is any
writing on the glass, you must be able to
read it clearly when the cavity doors are
open.
• Always make sure that the glass is
pushed fully into the Stop position.
CLEANING
• To remove the glass panel, open the
door wide, hold the top and bottom edges
and slide out.
• Warning: DO NOT operate the appliance
without the glass panel correctly fitted.
• For your safety, glass door panels are
made of toughened glass. This ensures
that, in the unlikely event that a panel
breaks, it does so into small fragments to
minimise the risk of injury. Please take care
when handling, using or cleaning all glass
panels, as any damage to the surfaces
or edges may result in the glass breaking
without warning or apparent cause at
a later date. Should any glass panel be
damaged, we strongly recommend that it
is replaced immediately.
Shelf Runners
• Shelf runners can be removed to
enable you to clean then thoroughly.
Make sure they are cool to touch and then
grasp the runners and slide out of their
hanging holes.
GAS HOB
Burner caps and heads
• The slots in the burner head where the
flames burn should be cleared of deposits.
• Clean with a nylon brush, rinse and
then dry thoroughly. There may be brown
coloured markings on your burners; these
are carbon deposits or fat stains and can
be removed using a soap filled pad.
• Do not put burners in the dishwasher
or soak them. Using dishwasher powders,
washing up liquids and caustic pastes can
damage the burners.
• Burner caps and heads must be
repositioned correctly so that they sit
squarely on to the hob as shown. This is
particularly important with stainless steel
models as failure to reposition the caps
correctly may result in discolouration of
the stainless steel around the burners.
INSTALLATION INSTRUCTIONS - GAS PRODUCTS
Before you start: Please read the
instructions. Planning your installation will
save you time and effort.
Prior to installation, ensure that the local
distribution conditions (nature of the gas
and gas pressure) and the adjustment
of the appliance are compatible. The
adjustment conditions are stated on the
data badge.
This appliance is not connected to a
combustion evacuation device. It shall be
installed and connected in accordance
with current installation regulation.
Particular attention shall be given to
the relevant requirements regarding
ventilation.
The information below is crucial to
installing this appliance correctly and
safely.
Gas Safety (Installation & Use)
Regulations
This appliance must by an authorised
person in accordance with the
Australian Gas Installation Standard
AS5601 the manufacturers installation
instructions, local gas fitting
regulations, and any other relevant
statutory regulations.
Particular attention should be given
to relevant requirements regarding
ventilation.
Failure to install appliances correctly is
dangerous and could lead to prosecution.
Ventilation Requirements
Ventilation must be as specified by
AS 5601 Installation code. The room
conatining the appliance should have an
air supply.
An appliance should be installed in a
location for complete combustion of gas,
proper flueing and to maintain ambient
temperature of the immediate surrounding
at safe limits, under normal conditions.
Failure to install appliances correctly is
dangerous and could lead to prosecution.
WARNING - This appliance is unsuitable for
use in a marine environment.
If the appliance is placed on a base,
measures have to be taken to prevent it
slipping from the base.
Caution: The use of gas cooking appliance
results in the production of heat, moisure
and products of combustion in the room
in which it was installed. Ensure that
the kitchen is well ventilated especially
when the appliance is in use: keep
natural ventilation holes open or install a
mechanical ventilation device (mechanical
extractor hood).
INSTALLATION INSTRUCTIONS - GAS PRODUCTS
Windows and permanent vents should
therefore not be blocked or removed
without first consulting a competent gas
installer.
Failure to install appliances correctly is
dangerous and could lead to prosecution.
Whilst every care is taken to eliminate
burrs and raw edges from this product,
please take care when handling - we
recommend the use of protective gloves
during installation.
Clearances
No shelf or overhang or cooker hood
should be closer than a minimum of
650mm, but check with cooker hood
manufacturer’s recommendations.
The cooker must have a side clearance
above hob level of 90mm up to a height
of 400mm.
This cooker may be fitted flush to base
units. However, for models with side
opening doors, we recommend a side
clearance of 60mm between the cooker
and any side wall.
Moving the cooker
Please note that the weight of this
appliance is approximately 60kg
(unpacked). Take care if the appliance
needs to be lifted during installation
- always use an appropriate method of
lifting.
Do not attempt to move the cooker by
pulling on the doors or handles. Open
the door and grasp the frame of the
cooker, taking care that the door does not
shut on your fingers. Take care to avoid
damage to soft or uneven floor coverings
when moving the appliance. Some
cushioned vinyl floor coverings may not be
designed to withstand sliding appliances
without marking or damage.
Clearances & dimensions
Appliance dimensions
All sizes are nominal - some variation is to
be expected. The ‘depth’ of the cooker, as
given below, is to the front of the door &
excluding knobs & handles.
depth:
width:
height - lid down:
height - lid raised:
600mm
600mm
900 - 915mm
1430 - 1445mm
INSTALLATION INSTRUCTIONS - GAS PRODUCTS
Levelling Your Cooker
A stability bracket can be fitted as follows:
Place a spirit level on a baking sheet onto
an oven shelf.
Place the cooker in position and draw a
PENCIL LINE level with the front edge (2).
The cooker is fitted with LEVELLING FEET
(1). Level your cooker to your desired
height using the levelling feet at the front
and rear of the cooker.
Mark the centre of the cooker to give a
CENTRE LINE (3).
Remove the cooker and mark off 200mm
to the right of the centre line (4) on the
rear wall.
Measure from FLOOR LEVEL to the
ENGAGEMENT EDGE where the stability
bracket will rest and add 2mm (5).
Transfer this dimension to the rear wall
and secure the bracket to the wall at this
height (6) using the two off centre holes in
the single bracket.
Stability bracket
If the cooker is fitted with a flexible
connection, a stability bracket should be
fitted to engage in the back of the cooker.
A stability bracket can be bought from
your local supplier.
" ! INSTALLATION INSTRUCTIONS - GAS PRODUCTS
Connect to the electricity supply - Gas
Warning: This appliance must be earthed.
As the colours of the wires in the mains
lead for the appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
The flexible mains lead is supplied
connected to a BS 1363 fused plug, the
plug is fitted with the correct fuse.
1. The wire which is coloured green and
yellow must be connected to the terminal
marked E (Earth) or coloured Green.
Replace only with a fuse of the same
rating and type.
2. The wire which is coloured blue must
be connected to the terminal marked N
(Neutral), or coloured Black.
(mains ignition models only)
3. The wire which is coloured brown must
be connected to the terminal marked L
(Live), or coloured Red.
The wires in the mains lead are coloured
in accordance with the following code:
Green and yellow = Earth,
Blue
=
Neutral,
Brown
=
Live.
The plug and socket must be accessible
after installation. Should the mains lead of
the appliance ever require replacing, we
recommend that this is carried out by a
qualified electrician who will replace it with
a lead of the same size and temperature
rating.
Important: - ensure that you route all
mains and electrical cables and flexible
tubing well clear of any adjacent heat
source.
Under no circumstances should the mains
electric cable be allowed to come into contact
with the vertical oven flue tubes on the rear of
the appliance.
INSTALLATION INSTRUCTIONS - GAS PRODUCTS
Connect to the gas supply
Means of isolation shall be provided at the
shut off point by either an approved quick
connect device or a Type 1 manual shut
off valve. The outlet of the quick connect
device shall be at, or below, the horizontal
position.
Natural Gas - Flexible connections should
comply with BS 669. Parts of the appliance
likely to come into contact with a flexible
connector have a temperature rise of less
than 70°C.
After installation, make sure all connections
are gas sound.
Commissioning
Burner aeration
All burners have fixed aeration and no
adjustment is possible.
Pressure setting
Natural Gas @ 1.00kPa
Pressure test point
Connection to the gas supply should be
made using the Aquaknect AS/NZS 1869
class B hose assembly with an internal
diameter of not less than 10mm and
regulator (regulator for use with natural
gas)
NOTE: Maximum length of hose 900mm.
The temperature rise of the areas at the
rear of the cooker that are likely to come
into contact with the flexible hose do not
exceed 70˙C.
The inlet to the cooker is ½” BSP internal
situated at the rear right corner. Fit the
bayonet connection. This should be
located so as to ensure that the flexible
connector hose does not kink.
Under no circumstances should the flexible
connector be allowed to come into contact with
the vertical oven flue tubes on the rear of the
appliance.
Use a 900mm - 1125mm length of
flexible connector.
Ensure that all pipework is of the correct
rating for both size and temperature.
Use the oven injector.
Grill - Open the top oven / grill door.Push
in and turn the top oven / grill control
knob clockwise to the ‘FULL ON’ position.
Hold the control knob in, and press the
ignition switch (if fitted) or hold a lighted
match or taper to the burner. Hold the
control knob in for 15 seconds. Do not
hold the control knob in for longer that 15
seconds. If the burner fails to light within
this time, release the control knob and
wait one minute before attempting further
ignition. until the burner lights.
Hob burner - Turn the control knob to the
FULL ON position, wait a second before
pressing the ignition switch or holding a
lighted match or taper to the burner. Hold
the control knob in for 15 seconds. Do not
hold the control knob in for longer that 15
seconds. If the burner fails to light within
this time, release the control knob and
wait one minute before attempting further
ignition.
INSTALLATION INSTRUCTIONS - GAS PRODUCTS
Ovens - Open the oven door. Turn the
control to the FULL ON position and press
the ignition switch, or hold a lighted match
or taper to the burner. Hold the control
knob in for 15 seconds. Do not hold the
control knob in for longer that 15 seconds.
If the burner fails to light within this time,
release the control knob and wait one
minute before attempting further ignition.
Before leaving the installation
1. Place all the loose parts of the cooker
into position.
2. Show the customer how to operate
the cooker and give them this handbook.
Thank you.
TECHNICAL DATA
Type of gas:
Please see data badge your for specified
gas type.
Never attempt to convert an appliance unless the data badge states that you can.
Burner Aeration:
Fixed
Pressure setting:
Natural Gas - 1.0 kPa
Propane - 2.75 kPa
Electrical supply:
220 - 240V ~ 50Hz
Countries of destination: AUS
Injectors used (0.01mm)
Size
Natural
Gas
LP gas
Small
82
50
Medium
118
70
Large
142
87
Grill
140
83
Top oven
180
75
Main oven
144
82
TECHNICAL DATA
Data - Oven and Grill Products
Fuel Type
Hotplate Burner /
Element
Nominal Rate
Qn
Natural Gas
Hob - small
Hob - medium x 2
Hob - large
Grill
Main oven
3.2MJ/h
6.5MJ/h
9.5MJ/h
8.6MJ/h
9.0MJ/h
Total heat input
•
LP Gas
Hob - small
Hob - medium x 2
Hob - large
Grill
Main oven
43.3MJ/h
3.2MJ/h
6.5MJ/h
9.5MJ/h
9.4MJ/h
8.6MJ/h
Total heat input
•
43.6MJ/h
Data - Double Oven Products - with
Electric Grill
Load (wattage): 1560 - 1940W
Fuel Type
Hotplate Burner /
Element
Nominal Rate
Qn
Natural Gas
Hob - small
Hob - medium x 2
Hob - large
3.2MJ/h
6.5MJ/h
9.5MJ/h
Top Oven
Main oven
6.3MJ/h
9.0MJ/h
Total heat input
•
LP Gas
41.0MJ/h
Hob - small
Hob - medium x 2
Hob - large
3.2MJ/h
6.5MJ/h
9.5MJ/h
Top Oven
Main oven
6.3MJ/h
8.6MJ/h
Total heat input
•
40.6MJ/h
ISSUE A
B ELLING FSG 60DO - AU
Wiring colour code: Bk - Black, Bn - Brown, Bu - Blue, Gn - Green, Or - Orange, R - Red, W - White, Y - Yellow.
NC
Bn
GRILL T/OVEN
MICROSWITCH
102
Bn
LIGHT SWITCH
503
C
NO
58
58
Bn
Bn
58
W
Bn
W
467
COOLING
FAN
102
L120c
THERMAL
CUTOUT
616
616
503
Bn
IGNITION
SWITCH
F60c
THERMAL
OVERRUN
SWITCH
84
Y
MAIN
OVEN
LAMP
310
Y
W
R
W
84
W
Gn
64
64
W
310
Gn
53
579
579
Bn
Gn
W
616
Y
W
616
Y
64
Gn
463
L
N
SW SW
IGNITION
GENERATOR
GRILL ELEMENT
EARTH
PLATE
POINT
IGNITION ELECTRODES
08 27488 00
01.2010
ISSUE A
B elling FSG 60DOP - AU
MAIN OVEN
THERMOSTAT
THERMOCOUPLE
INTERUPTER
CONNECTION
POINT
EARTH
POINT
INNER
FASCIA
106
PROGRAMMER
Bk
N
Bu
125
503
NC
NO
C
GRILL T/OVEN
MICROSWITCH
05
L
Bn
LIGHT SWITCH
08-3008800
Wiring colour code: Bk - Black, Bn - Brown, Bu - Blue, Gn - Green, Or - Orange, R - Red, W - White, Y - Yellow.
483
R
Y
58
58
Bn
Bn
F60C
THERMAL
SWITCH
84
Bn
Bk
W
467
106
R
IGNITION
SWITCH
05
Y
COOLING
FAN
L120c
THERMAL
CUTOUT
616
Bu
503
616
MAIN
OVEN
LAMP
125
Bu
R
Y
53
84
W
W
64
Gn
Bu
64
Y
106
Gn
Bn
Bu
64
616
616
463
L L
579 Gn
Y
579
N
SW SW
IGNITION
GENERATOR
Gn
GRILL ELEMENT
EARTH
PLATE
POINT
IGNITION ELECTRODES
08 27489 00
01.2010
ISSUE A
B ELLING FSG 60TC - AU
Wiring colour code: Bk - Black, Bn - Brown, Bu - Blue, Gn - Green, Or - Orange, R - Red, W - White, Y - Yellow.
106
MINUTE MINDER
Bk
N
Bu
437
LIGHT SWITCH
Door Switch
Harness
08-28345-00
W
Bn
125
Bn 503
V
310
L
Or
DOOR
SWITCH
3-WAY
TERMINAL
BLOCK
Y
58
58
1
F60c
THERMAL
OVERRUN
SWITCH
Bk
Bu
W
310
IGNITION
SWITCH
Bn
COOLING
FAN
Y
106
503
Bn
125
MAIN
OVEN
LAMP
616
Bu
Y
616
Bn
1
Bu
Gn
32
32
Gn
106
32
Bn
Bu
Y
L
Y
N
SW SW
IGNITION
GENERATOR
Gn
EARTH
POINT
SNOWMAN
IGNITION ELECTRODES
08 27487 00
01.2010
CUSTOMER CARE
FAQs
What parts of the appliance can be washed in
a dishwasher?
• Any enamelled parts such as the
grillpan can be cleaned in a dishwasher,
as can oven shelves and shelf guides.
What parts must NOT be cleaned in a dishwasher?
• Parts such as burner skirts and caps,
control knobs and any cast iron items
must not be cleaned in a dishwasher, they
should be cleaned with hot soapy water
and a nylon brush once they are cool
enough.
There’s been a power failure and the product
won’t work.
•
Switch off the electricity supply.
• When the power returns switch the
electricity supply back on and re-set any
programmer/clock to the correct time of
day.
My oven is a single combined oven and grill
- can I use both functions together?
• No. You can only use one or the
other.
Why is there condensation on the doors?
• Condensation is caused by hot, moist
air meeting a cooler surface (i.e. the oven
door). You cannot always prevent it, but
you can minimise it when it happens by
doing the following:
o
Pre-heat the oven at a high
temperature before putting
food in the oven, and cover the
food you are cooking wherever
possible.
o
Whenever you can, cook wet
foods at higher temperatures.
o
Don’t leave food in the oven to
cool down.
• Automatic cooking will normally
produce condensation when the oven is
cooling down with food inside.
Should the cooling fan continue to run once
the appliance has been switched off?
• Yes. This is to make sure that you can
always touch the control knobs to make
temperature adjustments, and turn your
appliance off.
Can all gas appliances be converted from
Natural Gas to LP Gas?
• Not all gas appliances can be
converted. If Category II is stated on
the databadge, then the appliance may
be converted and a conversion kit must
be obtained if not already provided. If in
doubt, please contact Customer Care for
further advice - do not attempt to convert
an appliance if it is not compatible.
Why won’t the ignition work?
• Check there is a spark when the
ignition button is depressed. If there is
no spark, check the electricity supply is
switched on at the socket. Check that the
gas supply is switched on.
Call Customer Care for a Service
Engineer’s visit if:
You find that the oven becomes hotter at
a particular temperature - the thermostat
may need replacing.
The Cooling fan fails to work.
CUSTOMER CARE
CHANGING LIGHT BULBS (where fitted)
Warning: There is a risk of electric shock,
so always make sure you have turned off
and unplugged your appliance before
starting. Always allow the product to cool
down before you change a bulb.
Not all appliances have the same number
and type of bulbs. Before replacing your
bulb, open the oven door and see which
type you have. Then use the table to help
you change your bulb correctly.
Bulbs can be purchased from hardware
stores (always take the old bulb with you).
Please remember that bulbs are not covered
by your warranty.
No of Lamps
Bulb location
Oven Type
Instructions
2
Side
All
Remove the oven shelves. Grasp the
lens cover on the light fitting and pull
it away from the side of the oven. Unscrew the bulb and replace. Replace the
lens cover
1
Rear
Fanned/Multifunction Remove the oven shelves. Remove the
loose oven back by unscrewing the 4
securing screws (one at each corner)
and remove. Unscrew the lens cover by
turning anticlockwise. Remove the bulb
and replace. Replace the lens cover and
oven back.
1
Rear
Conventional
Remove the oven shelves. Unscrew the
lens cover by turning anticlockwise.
Remove the bulb and replace. Replace
the lens cover.
CONTACT US
Calling for a service
If you should experience any problems with your cooker please contact your retailer or
place of purchase.
Important note:
Service work is to be conducted by authorised persons only. It is also adviseable
that your cooker is checked regularly and maintained in good condition. An annual
maintenance is recommended.
Always check the instruction book before calling a service agent to make sure you have
not missed anything.
Glen Dimplex Australia Pty Ltd Customer Care:
Tel: Australia 1-300-556-816
New Zealand 09-274-8265
Before you contact a service agent, make sure that you have the following information to
hand:
Model Number
Serial Number
Date of Purchase
Postcode
Glen Dimplex Australia, Unit 2, 205 Abbotts Road, Dandenong,
South Victoria 3175, Australia
e-mail: sales@glendimplex.com.au
web: www.glendimplex.com.au
Model Names: Belling FSG 08 27486 00d
03.2010
PRODUCT:
COLOUR:
CODE:
ISSUE:
DATE:
Key
00358
00783
0314
0349
0604
0697
0701
0880
0880
0108
0280
0328
0499
0507
0544
0558
0589
0728
0728
0734
0736
0791
0792
0907
0912
0980
0108
0280
0287
0467
0499
0507
0558
0591
0728
0728
0734
0736
0792
0907
0912
0980
0001
0056
0056
0083
0084
0085
0102
BEL FSG 60 DOP AU
Stainless Steel
444440497
Product
073103203
602925404
082360801
082233400
081830501
503009800
562044130
082569400
081545401
082914200
073103448
081586001
082543400
503009900
082547603
082049500
926016900
080125000
612818331
081367387
080180676
081797200
081423974
082554300
081702001
082821300
082583419
080482801
073103627
081586001
082543400
082971400
082852416
080011121
082049500
080125000
612818332
080180676
081367387
081797200
081423974
081702001
081366700
083039701
080482801
073103828
503003000
082922401
082922400
082519304
082519406
082519506
082957700
Sta
Product Description
CHASSIS fs 60 g do
FRONTFRAME 60 std
mot
SLEEVE silicone (black)
FAN cooling DP203A-2123LST-C31
FOOT levelling long
PANEL rear 60 gas
PLINTH 60
blk
PLUG hole blanking 14.7mm
SWITCH thermal2455R/82/713F60
SWITCH thermal cutout L120C
MAIN OVEN fs 60 g light
BUSH cavity support
ELECTRODE tcouple oven DEL705
FLUE tube
INJECTOR oven 1.44mm
BURNER oven 17020
LAMP assy oven
LOCKNUT thermocouple BRAS
CAVITY assy 60main gaso1r pri
SCREW M3X6 TORQ PAN HEAD BZP
SCREW m6x30 pp mc
SEAL main ov 550HL
KB
SEAL tap 4mm COPRECI F3862-04
SPACER oven fan
SPACER oven burner
055 KB
THERMOCOUPLE 1500mm
THERMOSTAT fsg 60 au
WIRE ign 890mm
92
92-4
4
TOP OVEN fs 60 g vg
BUSH cavity support
ELECTRODE tcouple oven DEL705
Element gr/single 20.35720.000
HOLDER phial 180mm
INJECTOR oven 180 amal
BURNER oven 17020
LOCKNUT thermocouple BRAS
CAVITY assy 60top gasog pri
SCREW m6x30 pp mc
SCREW M3X6 TORQ PAN HEAD BZP
SEAL main ov 550HL
KB
SEAL tap 4mm COPRECI F3862-04
SPACER oven burner
055 KB
THERMOCOUPLE oven 1300mm
THERMOSTAT
WIRE ign 890mm
92-4
HOB MECH 60 g lid au
ACTUATOR arm
HINGE BRKT ASS SBS RH(RIVETTD)
HINGE BRKT ASS SBS LH(RIVETTD)
BURNERBOWL aux (injector 0.82)
BURNERBOWL s/rapid (inj 1.18)
BURNERBOWL rapid (inj 1.42)
BURNERSKIRT aux (serie 3)
FREESTANDING
TCO
Replace
Date
Qty
1
1
1
1
4
1
1
1
1
1
1
2
1
2
1
1
1
1
1
2
2
1.6
1
2
2
1
1
1
1
2
1
1
1
1
1
1
1
2
2
1.1
1
2
1
1
1
1
2
1
1
1
2
1
1
PRODUCT:
COLOUR:
CODE:
ISSUE:
DATE:
Key
0103
0104
0178
0281
0552
0580
0728
0736
0803
0876
0888
0889
0894
0895
0909
0979
0124
0637
0637
0637
0637
0905
0917
NR
0147
0392
0458
0459
0738
0823
00455
0392
0738
0835
0182
0420
0421
0749
0182
0411
0420
0421
0427
0749
0967
0057
0247
0303
0304
0428
0057
0256
0303
BEL FSG 60 DOP AU
Stainless Steel
444440497
Product
082957701
082957702
082520000
082532602
502427500
082938800
083011900
081423974
082303400
083007700
082964506
082964505
082964604
082964606
083007500
083007600
073104803
083008800
083011100
083040100
083011000
083040000
083007900
082998600
073104001
082533800
083001000
082979700
082979701
080180734
082494402
073104201
082905901
083001001
080180734
082963200
073104409
082101600
082917304
082917305
082917403
073104613
082101600
602517700
082917300
082917301
082283705
082917403
082518800
073107500
561776724
073105501
083006000
013009702
082557900
082557901
562989812
073106001
083006000
013009602
082557900
Sta
Product Description
BURNERSKIRT semi (serie 3)
BURNERSKIRT rapid (serie 3)
CLIP spring Defendi
ELECTRODE 1300mm DEL703
LID clip
NUT flanged locking
SCREW no2 x 5/8" pz pan bzp
SEAL tap 4mm COPRECI F3862-04
SPRING lid rs2
SWITCH thermocouple
TAP semi 0.39 bp lh set 52-54A
TAP aux 0.32 bp lh set 52-54A
TAP semi 0.39 bp rh set 52-54A
TAP rapid 0.45 bp rh set 65-70
THERMOCOUPLE
THERMOCOUPLE wire
FACIA MECH fs 60 ang g prog
CABLE assy timer to interupter
PIPE stat to t/ov burner fs600
PIPE stat to t/ov burner
PIPE stat to m/ov burner fs600
PIPE stat to m/ov burner
INTERUPTER thermocouple
TIMER GAS345/ESK1293-026
MAIN DOOR MECH fs 60
CATCH roller (nylon)
GLASS inner fs 60 main
HINGE bottom door
HINGE top door
SCREW m4x12 tt pcsk ch blk
STRIKER door (silver)
TOP DOOR MECH fs 60 do
HINGE drop down door (Zan)
GLASS inner fs 60 top
SCREW m4x12 tt pcsk ch blk
Counter support
FURNITURE MAIN 60 stop
CLIP tubular
GUIDE shelf large lh
1978
GUIDE shelf large rh
1979
SHELF main oven 452 wide 1970
FURNITURE TOP 60gdo stop
CLIP tubular
GRILLPAN std
mot
GUIDE shelf small lh
1974
GUIDE shelf small rh
1975
HANDLE grill pan
1041
SHELF main oven 452 wide 1970
WIRE TRIVET grill pan
1130
SIDE PANELS
blk
Outerside
MAIN DOOR AES fs 60 be Sta
BRACKET door handle
DOOR assy 60 main be
sta
END CAP LH door ext
Blk
END CAP RH door ext
Blk
HANDLE door be 60
sta
TOP DOOR AES fs 60 be do sta
BRACKET door handle
DOOR assy 60 top be
sta
END CAP LH door ext
Blk
FREESTANDING
TCO
Replace
Date
Qty
2
1
4
4
2
4
4
4
2
4
1
1
1
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
2
1
2
2
1
2
1
1
2
1
2
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
2
1
1
PRODUCT:
COLOUR:
CODE:
ISSUE:
DATE:
Key
0304
0428
0090
0091
0092
0111
0472
0551
0614
0032
0113
0114
0299
0299
0322
0525
0810
0878
0879
0477
0424
BEL FSG 60 DOP AU
Stainless Steel
444440497
Product
082557901
702989812
073105004
082957800
082957801
082957802
056900900
602895007
012903901
082249902
073106635
082566102
082588500
081811301
083003102
083003103
013009520
083000900
083005100
081811101
081811100
073107049
083111701
073107689
082748600
Sta
Product Description
END CAP RH door ext
Blk
HANDLE door be 60
sta
HOB AES 60 g wire lid-be blk
BURNERCAP aux (serie3)blk gls
BURNERCAP semi (serie3)blk gls
BURNERCAP rapid(serie3)blk gls
BUTTON hotplate Blk
HOTPLATE 60 gas fsd lid be blk
LID glass assy 60
blk
PANSUPPORT wire fs 55/60
FACIA AES fs 60gdop be au blk
BEZEL switch
nic
BUTTON timer
BUTTON switch
ENDCAP facia lh matt black
ENDCAP facia rh matt black
FACIA assy be 60fsg dop blk
KNOB cont bi-gas fs-gasBlk/Chr
STEM timer button
SWITCH ignition E2009
SWITCH light E1036
WIRING fs g do clock
GENERATOR ignition
LABELS be fsg 60dop au
HANDBOOK be FSG au
FREESTANDING
TCO
Replace
Date
Qty
1
1
1
1
2
1
4
1
1
2
1
2
3
2
1
1
1
6
3
1
1
1
1
1
1
0420
0421
0182
0420
0421
7
FURNITURE TOP OVEN
419
419
410
ALTERNATIVE SHELF GUIDES - KEY NUMBER FOR OPPOSITE HAND 420
427
967
420
411
419
749
THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY.
THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
FURNITURE MAIN OVEN
422
422
410
427
967
ALTERNATIVE SHELF GUIDES- KEY NUMBER FOR OPPOSITE HAND 421
421
411
422
749
THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY.
THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
PRODUCT:
COLOUR:
CODE:
ISSUE:
DATE:
Key
00358
00783
0314
0349
0604
0697
0876
0880
0108
0280
0328
0499
0507
0544
0558
0589
0728
0728
0734
0736
0791
0792
0907
0912
0980
0067
0108
0283
0495
0558
0728
0728
0733
0736
0882
0891
0906
0083
0084
0085
0102
0103
0104
0178
0281
0580
0736
0888
0889
444440494
BEL FSG 60 TC AU
FREESTANDING
Sta
444440494
Product
073103213
602925404
082360801
082233400
081830501
503009800
562044130
082578200
081545401
073103448
081586001
082543400
503009900
082547603
082049500
926016900
080125000
612818331
081367387
080180676
081797200
081423974
082554300
081702001
082821300
082583419
080482801
073103626
082377806
081586001
082271500
082837802
080125000
080180676
081367387
081797201
081423974
082961100
082548819
082469800
073103829
082519304
082519406
082519506
082957700
082957701
082957702
082520000
082532602
082938800
081423974
082964506
082964505
Product Description
CHASSIS fs 60 g tc
FRONTFRAME 60 std
mot
SLEEVE silicone (black)
FAN cooling DP203A-2123LST-C31
FOOT levelling long
PANEL rear 60 gas
PLINTH 60
blk
SWITCH door ROLD
SWITCH thermal2455R/82/713F60
MAIN OVEN fs 60 g light
BUSH cavity support
ELECTRODE tcouple oven DEL705
FLUE tube
INJECTOR oven 1.44mm
BURNER oven 17020
LAMP assy oven
LOCKNUT thermocouple BRAS
CAVITY assy 60main gaso1r pri
SCREW M3X6 TORQ PAN HEAD BZP
SCREW m6x30 pp mc
SEAL main ov 550HL
KB
SEAL tap 4mm COPRECI F3862-04
SPACER oven fan
SPACER oven burner
055 KB
THERMOCOUPLE 1500mm
THERMOSTAT fsg 60 au
WIRE ign 890mm
92-4
TOP GRILL fs 60 g
Burner grill(new venturi)32024
BUSH cavity support
ELECTRODE AB32302 DEL717
INJECTOR grill ng 1.41
LOCKNUT thermocouple BRAS
SCREW m6x30 pp mc
SCREW M3X6 TORQ PAN HEAD BZP
SEAL grill
KB
SEAL tap 4mm COPRECI F3862-04
THERMAL SWITCH L120C
TAP ng grill
THERMOCOUPLE with leads
HOB MECH 60g fsd
BURNERBOWL aux (injector 0.82)
BURNERBOWL s/rapid (inj 1.18)
BURNERBOWL rapid (inj 1.42)
BURNERSKIRT aux (serie 3)
BURNERSKIRT semi (serie 3)
BURNERSKIRT rapid (serie 3)
CLIP spring Defendi
ELECTRODE 1300mm DEL703
NUT flanged locking
SEAL tap 4mm COPRECI F3862-04
TAP semi 0.39 bp lh set 52-54A
TAP aux 0.32 bp lh set 52-54A
TCO
Replace
Date
Qty
1
1
1
1
4
1
1
1
1
1
2
1
2
1
1
1
1
1
2
2
1.6
1
2
2
1
1
1
1
1
2
1
1
1
2
1
1.3
1
1
1
1
1
1
2
1
1
2
1
4
4
4
4
1
1
PRODUCT:
COLOUR:
CODE:
ISSUE:
DATE:
Key
0894
0895
0909
0910
0637
0637
0916
0147
0392
0458
0459
0738
0823
0455
0738
0835
0182
0420
0421
0749
0182
0411
0420
0421
0427
0749
0967
0057
0247
0303
0304
0428
0057
0256
0303
0304
0428
0090
0091
0092
0111
0472
0614
0032
0113
0114
0299
0299
0322
0525
444440494
BEL FSG 60 TC AU
FREESTANDING
Sta
444440494
Product
082964604
082964606
082938701
082938700
073104802
083040000
083011000
082876800
073104001
082533800
083001000
082979700
082979701
080180734
082494402
073104202
082905900
080180734
082963200
073104409
082101600
082917304
082917305
082917403
073104607
082101600
602517700
082917300
082917301
082283705
082917403
082518800
073107500
561776724
073105501
083006000
013009702
082557900
082557901
562989812
073106016
083006000
013009605
082557900
082557901
702989812
073105006
082957800
082957801
082957802
056900900
602895007
082249902
073106632
082566102
082588500
081811301
083003102
083003103
013009517
083000900
Product Description
TAP semi 0.39 bp rh set 52-54A
TAP rapid 0.45 bp rh set 65-70
Thermocouple 500mm long
Thermocouple 300mm short
FACIA MECH fs 60 ang g mm
PIPE stat to m/ov burner
PIPE stat to m/ov burner fs600
TIMER m/minder green display
MAIN DOOR MECH fs 60
CATCH roller (nylon)
GLASS inner fs 60 main
HINGE bottom door
HINGE top door
SCREW m4x12 tt pcsk ch blk
STRIKER door (silver)
TOP DOOR MECH fs tc
HINGE drop down door (Zan)
SCREW m4x12 tt pcsk ch blk
Counter support
FURNITURE MAIN 60 stop
CLIP tubular
GUIDE shelf large lh
1978
GUIDE shelf large rh
1979
SHELF main oven 452 wide 1970
FURNITURE TOP 60 stop
CLIP tubular
GRILLPAN std
mot
GUIDE shelf small lh
1974
GUIDE shelf small rh
1975
HANDLE grill pan
1041
SHELF main oven 452 wide 1970
WIRE TRIVET grill pan
1130
SIDE PANELS
blk
Outerside
MAIN DOOR AES fs 60 be Sta
BRACKET door handle
DOOR assy 60 main be
sta
END CAP LH door ext
Blk
END CAP RH door ext
Blk
HANDLE door be 60
sta
TOP DOOR AES fs 60 be tc sta
BRACKET door handle
DOOR assy 60 grill be
sta
END CAP LH door ext
Blk
END CAP RH door ext
Blk
HANDLE door be 60
sta
HOB AES 60 g wire
blk
BURNERCAP aux (serie3)blk gls
BURNERCAP semi (serie3)blk gls
BURNERCAP rapid(serie3)blk gls
BUTTON hotplate Blk
HOTPLATE 60 gas fsd lid be blk
PANSUPPORT wire fs 55/60
FACIA AES fs be 60g tc au blk
BEZEL switch
nic
BUTTON timer
BUTTON switch
ENDCAP facia lh matt black
ENDCAP facia rh matt black
FACIA assy be 60 fsg au blk
KNOB cont bi-gas fs-gasBlk/Chr
TCO
Replace
Date
Qty
1
1
2
2
1
1
1
1
1
1
1
1
1
4
1
1
2
2
2
1
2
1
1
2
1
2
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
2
1
1
1
1
1
1
2
1
4
1
2
1
2
3
2
1
1
1
6
PRODUCT:
COLOUR:
CODE:
ISSUE:
DATE:
Key
0810
0878
0879
0477
0424
444440494
BEL FSG 60 TC AU
FREESTANDING
Sta
444440494
Product
083005100
081811101
081811100
073107047
081273002
83111700
073107681
082748600
Product Description
STEM timer button
SWITCH ignition E2009
SWITCH light E1036
WIRING fs 60g tc clock au
Connector 3 way
GENERATOR ignition
LABELS be 60tc au
HANDBOOK be FSG au
TCO
Replace
Date
Qty
3
1
1
1
1
1
1
1
0420
0421
0182
0420
0421
FURNITURE TOP OVEN
419
419
410
ALTERNATIVE SHELF GUIDES - KEY NUMBER FOR OPPOSITE HAND 420
427
967
420
411
419
749
THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY.
THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
FURNITURE MAIN OVEN
422
422
410
427
967
ALTERNATIVE SHELF GUIDES- KEY NUMBER FOR OPPOSITE HAND 421
421
411
422
749
THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY.
THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
PRODUCT:
COLOUR:
CODE:
ISSUE:
DATE:
Key
00358
00783
0314
0349
0604
0697
0876
0880
0108
0280
0328
0493
0507
0544
0558
0589
0728
0728
0734
0736
0791
0792
0907
0912
0980
0067
0108
0283
0495
0558
0728
0728
0733
0736
0882
0891
0906
0083
0084
0085
0102
0103
0104
0178
0281
0580
0736
0887
0888
BEL FSG 60 TC LPG AU
White
444440562
Product
073103213
602925404
082360801
082233400
081830501
503009800
562044130
082578200
081545401
073103465
081586001
082543400
503009900
082547605
082049500
926016900
080125000
612818331
081367387
080180676
081797200
081423974
082554300
081702001
082821300
082583420
080482801
073103633
082377806
081586001
082271500
082837801
080125000
080180676
081367387
081797201
081423974
082961100
082548820
082469800
073103865
082519302
082519404
082519504
082957700
082957701
082957702
082520000
082532602
082938800
081423974
082964608
082964508
Whi
Product Description
CHASSIS fs 60 g tc
FRONTFRAME 60 std
mot
SLEEVE silicone (black)
FAN cooling DP203A-2123LST-C31
FOOT levelling long
PANEL rear 60 gas
PLINTH 60
blk
SWITCH door ROLD
SWITCH thermal2455R/82/713F60
MAIN OVEN fs 60 lpg light
BUSH cavity support
ELECTRODE tcouple oven DEL705
FLUE tube
INJECTOR amal 0.82mm
BURNER oven 17020
LAMP assy oven
LOCKNUT thermocouple BRAS
CAVITY assy 60main gaso1r pri
SCREW M3X6 TORQ PAN HEAD BZP
SCREW m6x30 pp mc
SEAL main ov 550HL
KB
SEAL tap 4mm COPRECI F3862-04
SPACER oven fan
SPACER oven burner
055 KB
THERMOCOUPLE 1500mm
THERMOSTAT fs 60 lpg au
WIRE ign 890mm
92-4
TOP GRILL fs 60 lpg
Burner grill(new venturi)32024
BUSH cavity support
ELECTRODE AB32302 DEL717
INJECTOR grill lpg 0.83
LOCKNUT thermocouple BRAS
SCREW m6x30 pp mc
SCREW M3X6 TORQ PAN HEAD BZP
SEAL grill
KB
SEAL tap 4mm COPRECI F3862-04
THERMAL SWITCH L120C
TAP lpg grill
THERMOCOUPLE with leads
HOB MECH 60lpg fsd
BURNERBOWL auxillary (0.50jet)
BURNERBOWL semi rapid(0.70jet)
BURNERBOWL rapid (0.87jet)
BURNERSKIRT aux (serie 3)
BURNERSKIRT semi (serie 3)
BURNERSKIRT rapid (serie 3)
CLIP spring Defendi
ELECTRODE 1300mm DEL703
NUT flanged locking
SEAL tap 4mm COPRECI F3862-04
TAP rapid 0.45 bp rh
TAP semi 0.39 bp lh
FREESTANDING
TCO
Replace
Date
Qty
1
1
1
1
4
1
1
1
1
1
2
1
2
1
1
1
1
1
2
2
1.6
1
2
2
1
1
1
1
1
2
1
1
1
2
1
1.3
1
1
1
1
1
1
2
1
1
2
1
4
4
4
4
1
1
PRODUCT:
COLOUR:
CODE:
ISSUE:
DATE:
Key
0889
0889
0909
0910
0637
0637
0916
0147
0392
0458
0459
0738
0823
0455
0738
0835
0182
0420
0421
0749
0182
0411
0420
0421
0427
0749
0967
0057
0247
0303
0304
0428
0057
0256
0303
0304
0428
0090
0091
0092
0111
0614
0032
01
01
0113
0114
0322
0525
0810
BEL FSG 60 TC LPG AU
White
444440562
Product
082964607
082964507
082938701
082938700
073104802
083040000
083011000
082876800
073104001
082533800
083001000
082979700
082979701
080180734
082494402
073104202
082905900
080180734
082963200
073104409
082101600
082917304
082917305
082917403
073104607
082101600
602517700
082917300
082917301
082283705
082917403
082518800
073107501
561776701
073105503
083006000
013009701
082557900
082557901
562989811
073106079
083006000
013009606
082557900
082557901
702989811
073105049
082957800
082957801
082957802
267772000
082249902
073106633
082566102
563003100
563003101
082588500
082566202
013009518
083000901
083005100
Whi
Product Description
TAP semi 0.39 bp rh
TAP aux 0.32 bp lh
Thermocouple 500mm long
Thermocouple 300mm short
FACIA MECH fs 60 ang g mm
PIPE stat to m/ov burner
PIPE stat to m/ov burner fs600
TIMER m/minder green display
MAIN DOOR MECH fs 60
CATCH roller (nylon)
GLASS inner fs 60 main
HINGE bottom door
HINGE top door
SCREW m4x12 tt pcsk ch blk
STRIKER door (silver)
TOP DOOR MECH fs tc
HINGE drop down door (Zan)
SCREW m4x12 tt pcsk ch blk
Counter support
FURNITURE MAIN 60 stop
CLIP tubular
GUIDE shelf large lh
1978
GUIDE shelf large rh
1979
SHELF main oven 452 wide 1970
FURNITURE TOP 60 stop
CLIP tubular
GRILLPAN std
mot
GUIDE shelf small lh
1974
GUIDE shelf small rh
1975
HANDLE grill pan
1041
SHELF main oven 452 wide 1970
WIRE TRIVET grill pan
1130
SIDE PANELS
whi
Outerside
MAIN DOOR AES fs 60 be Whi
BRACKET door handle
DOOR assy 60 main be
whi
END CAP LH door ext
Blk
END CAP RH door ext
Blk
HANDLE door be 60
whi
TOP DOOR AES fs 60 be tc whi
BRACKET door handle
DOOR assy 60 top be
whi
END CAP LH door ext
Blk
END CAP RH door ext
Blk
HANDLE door be 60
whi
HOB AES fs 60 g wire
whi
BURNERCAP aux (serie3)blk gls
BURNERCAP semi (serie3)blk gls
BURNERCAP rapid(serie3)blk gls
BUTTON hotplate Whi
PANSUPPORT wire fs 55/60
FACIA AES fs be 60g tc au whi
BEZEL switch
nic
ENDCAP facia lh
whi
ENDCAP facia rh
whi
BUTTON timer
BUTTON switch
whi
FACIA assy be 60 fsg tc au whi
KNOB cont bi-gas fs-gasWhi/Chr
STEM timer button
FREESTANDING
TCO
Replace
Date
Qty
1
1
2
2
1
1
1
1
1
1
1
1
1
4
1
1
2
2
2
1
2
1
1
2
1
2
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
2
1
1
1
1
1
1
2
1
4
2
1
2
1
1
3
2
1
6
3
PRODUCT:
COLOUR:
CODE:
ISSUE:
DATE:
Key
0878
0879
0477
0424
BEL FSG 60 TC LPG AU
White
444440562
Product
081811101
081811100
073107047
083111700
081273002
073107722
082748600
Whi
Product Description
SWITCH ignition E2009
SWITCH light E1036
WIRING fs 60g tc clock au
GENERATOR ignition
connector 3 way
LABELS be 60 tc lpg au
HANDBOOK be FSG au
FREESTANDING
TCO
Replace
Date
Qty
1
1
1
1
1
1
1
FURNITURE TOP OVEN
419
419
410
ALTERNATIVE SHELF GUIDES - KEY NUMBER FOR OPPOSITE HAND 420
427
967
420
411
419
749
THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY.
THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
EV MAIN DOOR GLASS LH
432
147
459
823
304
057
428
303
ALTERNATIVE HANDLE DESIGN
790
309
428
398
247
713
458
THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY.
THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
FACIA FREESTANDING
319
879
879
878
917
ALTERNATIVE METAL FASCIA
319
878
905
300
124
299
113
32
114
525
527
DF
THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY.
THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
ONLY
FURNITURE MAIN OVEN
422
422
410
427
967
ALTERNATIVE SHELF GUIDES- KEY NUMBER FOR OPPOSITE HAND 421
421
411
422
749
THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY.
THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
1
BELLING
GAS FREESTANDING
REPAIR
AND
MAINTAINANCE
PROCEDURES
2
IMPORTANT
BEFORE CARRYING
OUT ANY SERVICING
WORK ALWAYS
DISCONNECT FROM
THE ELECTRICAL
SUPPLY
1) REMOVING THE MAIN OVEN DOOR
REMOVE THE 2 SCREWS FROM
THE LOWER HINGE AS
INDICATED.
REMOVE THE LOWER HINGE
AND SLIDE THE DOOR
DOWNWARDS AWAY FROM THE
TOP HINGE
ENSURE THAT THE DOOR IS
SUPPORTED AT ALL TIMES
2) REMOVING THE TOP OVEN DOOR
OPEN THE DOOR FULLY
RELEASE THE 2 CLIPS AND PUSH
FULLY BACK INTO POSITION
SHOWN
CLOSE DOOR TO REST POSITION
AND LIFT TO REMOVE DOOR AND
HINGE
WHEN REPLACING ENSURE THAT
HINGES ARE FULLY ENGAGED IN
THE HINGE BUSH
REMOVING THE HINGE FROM THE DOOR
REMOVE THE 2 SCREWS AS
INDICATED
PULL THE HINGE OUT OF THE
DOOR EXTRUSION
3) LID REMOVAL
WITH LID IN THE UPRIGHT
POSITION REMOVE 2 SIDE
PLATES BY LOOSENING THE 2
SCREWS
REMOVE THE 2 LID SPRINGS BY
RELEASING THE SPRINGS
FROM THE LOWER HOLES
REMOVE THE 2 LID CLIPS AND
CAREFULLY LIFT THE LID AWAY
FROM THE HOBTOP
ENSURE THAT THE LID IS
SUPPORTED AT ALL TIMES
AFTER REMOVAL OF THE LID
4) HOB TOP REMOVAL
REMOVE 4X HOTPLATE
BUTTONS AS SHOWN (2 ON
EITHER SIDE)
LIFT THE HOB TOP AWAY
WHEN REPLACING ALWAYS ENSURE THAT THE HOB TOP
LOCATES BENEATH THE FACIA
PANEL AND THAT THE BURNER
BOWLS LOCATE IN THE HOLES
CORRECTLY
5) REMOVAL OF SIDE PANELS
REMOVE 2X SCREWS AT REAR OF
APPLIANCE
REMOVE 2X SCREWS FROM FRONT
OF APPLIANCE
REMOVE SIDE PANEL
6) REMOVAL OF FACIA PANEL
CARRY OUT BOTH OPERATIONS IN
STEP 5 (REMOVAL OF SIDE PANELS)
REMOVE ALL CONTROL KNOBS
REMOVE 4 X HOLDING SCREWS 2
ON EACH SIDE
AND REMOVE THE FACIA PANEL
7) REMOVING THE REAR SERVICE PANEL
REMOVE BOTH FLUE TUBES
FROM REAR
REMOVE SECURING SCREWS X6
REMOVE REAR SERVICE PANEL
WITH CARE SO AS NOT TO
DISCONNECT ANY OF THE WIRES
CONNECTED TO THE IGNITION
GENERATOR
REAR SERVICE PANEL
REMOVED
8) GAINING ACCESS UNDERNEATH HOBTOP
THE HOB TOP CAN BE REMOVED WITHOUT REMOVING THE
LID USING THE FOLLOWING PROCEDURE
REMOVE THE 2 SCREWS HOLDING
THE SIDE PANEL
REPEAT FOR L/H SIDE PANEL
REMOVE THE CONTROL KNOBS
GENTLY PULL THE SIDE PANEL AWAY
FROM THE APPLIANCE AND REMOVE
THE 2 FACIA PANEL SECURING
SCREWS
REMOVE THE 4 HOTPLATE BUTTONS AS SHOWN IN STEP 4
THE HOB TOP MAY NOW BE LIFTED
TO GAIN ACCESS TO THE GAS TAPS/
THERMOSTATS/ELECTRODES ETC
TAKE CARE TO ENSURE THAT THE
HOB TOP IS SUPPORTED AT ALL
TIMES WHEN WORKING UNDERNEATH
WHEN REFITTING ALWAYS ENSURE
THAT THE BURNERBOWLS
PROTRUDE THROUGH THE HOLES IN
THE HOB TOP FULLY
REPLACEMENT OF COMPONANTS
A) ELECTRODES
FOLLOW STEP 8( PAGE 9 ) AND
REMOVE THE HOB TOP
REMOVE ELCTRODE CLIP BY
SQEEZING TOGETHER AND PULLING
TO REMOVE
REMOVE ELECTRODE FROM
BURNER BOWL AND IGNITION LEAD
FROM IGNITIION GENERATOR
ON REPLACING ALWAYS ENSURE
THAT THE RUBBER WASHER IS
REFITTED
B) HOB THERMOCOUPLES
FOLLOW STEP 8 (PAGE 9) AND REMOVE THE HOB TOP
REMOVE UPPER NUT USING A 7mm
SPANNER
REMOVE THE THERMOCOUPLE
FROM THE BURNERBOWL AND
DISCONNECT FROM HOB SHUT-OFF
MICROSWITCH
ON REPLACING ALWAYS ENSURE
THAT THE RUBBER WASHER IS
REPLACED TO REDUCE DISTURBANCE TO THE FLAME DUE TO THE
COOLING FAN
C) COOLING FAN
FOLLOW STEP 8 (PAGE 9) AND REMOVE THE HOB TOP
REMOVE THE 4 SECURING SCREWS
AND REMOVE THE FAN AND FAN
GUARD
DISCONNECT THE WIRES
WHEN RE-FITTING ALWAYS REFIT
THE FAN GUARD
D) GAS TAPS
FOLLOW STEP 8 (PAGE 9) LIFT HOB
TOP
FOLLOW STEP 6 (PAGE 7) REMOVE
FACIA PANEL
REMOVE 1 SCREW AS SHOWN ON
EITHER SIDE
PULL FORWARD INNER FACIA PANEL
TO GAIN ACCESS TO THE 2 TAP
SECURING SCREWS
UNDO BUNDY TUBE CONNECTION
AND REMOVE
DISCONNECT THERMOCOUPLE
REMOVE 2 GAS TAP SECURING
SCREWS AND REMOVE THE TAP
WHEN REPLACING TAP ALWAYS
ENSURE THAT A NEW TAP WASHER IS
FITTED (part number 081423974)
E) THERMOSTATS
FOLLOW STEP 8 (PAGE 9) REMOVE
HOB TOP
DISCONNECT BUNDY TUBE NUT AND
THERMOCOUPLE
REMOVE 2 T/STAT SECURING
SCREWS AND REMOVE THE T/STAT
FROM GAS RAIL
DISCONNECT THE T/STAT PHIAL
FROM INSIDE THE OVEN CAVITY (R/H
SIDE OF CAVITY IN BOTH OVENS
AND PULL THROUGH TO REMOVE
T/STAT FULLY
WHEN REPLACING ALWAYS ENSURE
THAT A NEW TAP SEAL IS FITTED
F) TIMER
FOLLOW STEP 6 REMOVE
FACIA PANEL
RELEASE TIMER FROM HOLDING
CLIPS BY GENTLY PUSHING IN CLIPS
WITH A SCREWDRIVER
G) IGNITION /LIGHT SWITCHES
FOLLOW STEP 6 (PAGE 7) REMOVAL OF FACIA
PANEL
REMOVE IGNITION/LIGHT SWITCH BY RELEASING
CLPIS AS REQUIRED
H) DOOR SEAL
THE DOOR SEAL IS REMOVED BY
JUST PULLING IT IS SECURED IN THE
GAP BETWEEN THE CAVITY AND
FRONFRAME AND REQUIRES NO
OTHER FIXING
TO REFIT PUSH IN ALWAYS ENSURE
THAT DOOR SEAL LIP IS FACING CORRECT WAY
I) GRILL ELEMENT
FOLLOW STEP 7 (PAGE ?) REMOVE
REAR SERVICE PANEL
DISCONNECT WIRES
REMOVE GRILL ELEMENT GUARD BY
LOOSENING 2 HIDDEN SCREWS
(POSITIONS INDICATED ) AND
SLIDING OFF
REMOVE 2 SECURING SCREWS FROM
ELEMENT BRACKET AND REMOVE
FROM CAVITY BY PULLING
FORWARD
J) TOP OVEN BURNER
LOOSEN HIDDEN SCREW IN BURNER
SHIELD( AS INDICATED ) AND SLIDE
AWAY
TO REMOVE THE BURNER REMOVE
THE SECURING NUT IN THE MIDDLE
OF THE BURNER
PULL THE BURNER FROM THE
BURNER HOUSING
THE ELCTRODE CAN NOW BE
REMOVED FROM THE BURNER
WITH THE BURNER SHIELD REMOVED THE THERMOCOUPLE CAN
BE REMOVED BY UNDOING THE
SECURING NUT AND PULLING THE
T/COUPLE FROM IT’S HOLDER
K) MAIN OVEN LIGHT FITTING
FOLLOW STEP 7 (PAGE 7) REMOVING
REAR SERVICE PANEL
REMOVE GLASS LAMP COVER BY
UNSCREWING
REMOVE THE EARTH LEAD
RELEASE 4 XCLIPS HOLDING LIGHT
FITTING IN PLACE
REMOVE BY PULLING LIGHT FITTING
FORWARD INTO CAVITY
L) IGNITION GENERATOR
REMOVE 2 X EARTHING SCREWS
RELEASE IGNITION GENERATOR BY
PUSHING IN CLIPS ON R/H SIDE OF
GENERATOR AS SHOWN
REMOVE THE GENERATOR BY
PULLING AWAY FROM REAR SERVICE
PANEL
TECHNICAL SPECIFICATIONS
NOMINAL RESISTANCES AT 20oC
*5,//(/(0(17Ÿ:
&22/,1*)$1NŸ
OVERHEAT CUT-OUTS
MAIN
120oC
FAN RUN-ON
60oC
20
BELLING
GAS FREESTANDING
COOKERS
FAULTFINDING
GUIDES
Gas freestanding Main oven not working
Customer reports main oven not
working – Hotplate – top oven or
grill OK.
Is the clock set
to manual?
YES
NO
Advise customer on
setting the timer
Does ignition start?
Can the customer
smell gas in the oven?
NO
NO
Replace micro switch
YES
Can the customer
smell gas in the oven?
YES
Replace Spark
generator
NO
YES
Can oven be lit with
a match?
YES
If new appliance possible
adjustment to electrode required –
If older appliance make sure
customer has not spilled
something on the burner?
Possible solenoid
fault check supply to
solenoid if ok replace
solenoid
Top oven not working
Customer reports top oven not
working
Does the
grill work?
YES
Does oven ignition
spark?
NO
NO
Possible gas supply problem
if whole appliance affected
customer to have supply
checked – if just top oven /
grill replace top oven t/stat
Can the customer
smell gas in the oven?
NO
YES
Can the customer
smell gas in the oven?
NO
YES
Replace micro switch
Replace ignition
generator
YES
Possible solenoid
fault – check supply
to solenoid if ok
replace solenoid
Can oven be lit with
a match?
If new appliance possible
adjustment to electrode required –
If older appliance make sure
customer has not spilled
something on the burner?
Oven with FSD won’t maintain temperature
Oven will not regulate
temperature
When the oven is lit
does the flame increase
to full rate
NO
YES
No
Have customer
re-fit inner
door glass
Send engineer
with FSD or Burner
assy
Does the customer have
the inner door glass
fitted?
YES
Ask customer to check for visual
signs of damage to oven door
seal – Is it damaged?
YES
NO
Possible thermostat fault send
part and engineer
Send door seal
and engineer