Akai ALED2405T User manual

ALED 1605TBK/TWE, 1905TBK/TWE, 2205TBK/TWE, 2405TBK/TWE,
2605TBK/TWE, 3205TBK/TWE
User manual
1
Contents
Features.........................................................................1
Managing Stations: Favorites......................................... 14
Introduction ....................................................................1
Button Functions............................................................ 14
Preparation ....................................................................1
Managing Stations: Sorting Channel List........................ 14
Safety Precautions .........................................................2
On-Screen Information................................................... 15
Power.......................................................................2
Media Playback Using Media Browser ........................... 15
Connection to a Television Distribution
Viewing Photos via USB ................................................ 16
System (Cable TV etc.) from Tuner ..........................3
Media Browser Settings ................................................. 16
Package Contents..........................................................4
Changing Image Size: Picture Formats .......................... 17
Environmental Information..............................................4
Configuring Picture Settings........................................... 18
Repair Information....................................................4
Operating Picture Settings Menu items .......................... 19
Remote Control Buttons .................................................5
PC Picture Settings........................................................ 19
LCD TV and Operating Buttons......................................6
Configuring Sound Settings ........................................... 20
Viewing the Back side Connections................................6
Operating Sound Settings Menu Items........................... 20
Viewing the Connections – Side Connectors ..................7
Sound Settings Menu Items ........................................... 20
Power Connection..........................................................7
Configuring Your TV´s Settings...................................... 20
Using Digital Multimedia Connectors ..............................8
Operating Setting Menu Items........................................ 20
USB Memory Connection .........................................8
Setting Menu Items ........................................................ 20
Connecting the LCD TV to a PC.....................................8
Using a Conditional Access Module ............................... 21
Using Side AV Connectors .............................................8
Viewing Conditional Access Menu (*)............................. 21
Connecting to a DVD Player via HDMI ...........................8
Configuring Language Preferences................................ 21
Connecting to a DVD Player via Component
Language Settings ......................................................... 22
Sockets (YPbPr) or Scart Cable .....................................9
Parental Control............................................................. 22
Remote Control Handset................................................9
Parental Settings Menu Operation ................................. 22
Inserting Batteries ...................................................9
Timers ........................................................................... 22
Switching On/ Off ...........................................................9
Settings Sleep Timer...................................................... 22
To Switch the TV On ..............................................9
Settings Programme Timers........................................... 23
To Switch the TV Off ..............................................9
Adding a Timer .............................................................. 23
Input Selection ...............................................................10
Editing a Timer............................................................... 23
Basic Operations............................................................10
Deleting a Timer ............................................................ 23
Operation with the Buttons on the TV .....................10
Configuring Date/Time Settings ..................................... 23
Volume Setting ...................................................10
Configuring Source Settings........................................... 23
Program Selection
Configuring Other Settings............................................. 24
( Previous or Next Program ) ..............................10
Operation....................................................................... 25
Program Selection ( Direct Access) ....................10
Other Features............................................................... 26
Teletext.......................................................................... 26
Viewing Electronics Program Guide (EPG).....................10
Tips................................................................................ 26
First Time Installation .....................................................11
Appendix A: PC Input Typical Display Modes................. 27
Installation......................................................................12
Appendix B: AV and HDMI Signal
Automatic Channel Scan
Compatibility ( Input Signal Types)................................. 27
(Retune) Menu Operation...............................................12
Appendix E: Software Upgrade ...................................... 28
Manual Tuning ...............................................................12
Specifications................................................................. 29
Digital Manual Search ....................................................13
MOBIL TV INSTRUCTION MANUAL ............................. 30
Analogue Manual Search ...............................................13
Analogue Fine Tune.......................................................13
Clear Service List (*) ......................................................13
Managing Stations: Channel List ....................................13
Operating the Channel List.............................................13
Moving a Channel ..........................................................13
Deleting a Channel.........................................................14
Renaming a Channel......................................................14
Locking a Channel .........................................................14
2
Features
Introduction
•
Remote controlled colour LCD TV.
Please read the corresponding instructions of this
•
Fully integrated Terrestrial digital video and
handbook prior to the first usage of the device, even
audio. this connection is also designed to
when the usage of electronic devices is familiar to
accept high definition signals.
you. Notice especially the chapter SAFETY
•
USB input
PRECAUTIONS. carefully keep the handbook as
•
1000 programmes (analogue+digital).
future reference. When selling the device or giving it
•
OSD menu system.
•
Integrated tuner MPEG2 compatible.
•
Scart socket for external devices ( such as
away, absolutely give these direction for use.
Thank you for choosing this product. This manual
will guide you for the proper operation
of your TV. Before operating the TV,
video, video games, audio set, etc.).
please read this manual thoroughly.
•
Stereo sound system. (German+Nicam)
•
Teletext, fastext, TOP text.
•
Headphone connection.
•
Automatic programming system.
•
Forward or backward manual tuning.
•
Sleep timer/ Child lock.
sources possible ( receiver, DVD player, DVD
•
Automatic sound mute when no transmission.
recorder,
•
NTSC playback.
VCR, PC etc.) This device is only suitable for the
•
AVL (Automatic Volume Limiting).
operation in dry interiors. this appliance is intended
•
Auto power down.
solely for private domestic use and may not be used
•
PLL ( Frequency Search).
for industrial
•
PC input
and commercial purposes. we exclude liability in
•
Plug & Play for Windows 98, ME, 2000, XP,
principle, if the device is not used as intended, or
vista, Windows 7.
unauthorized modifications have been made. To
Game Mode
operate your LCD TV in extreme ambient conditions
•
Please do keep this manual in a safe place for
future references.
This devices is intended to receive and display TV
programs. The different connection options make an
additional expansion of the reception and display
may cause the damage of the device.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top of
the set. Use this device in moderate climates.
3
Safety Precautions
Heat and Flames
Read the following recommended safety
The set should not be placed near to open
precautions carefully for your safety.
flames and sources of intense heat such
as an electric heater. Ensure that no open
Power
flame sources, such as lighted candles,
•
Always use the provided AC adaptor.
are placed on top of the TV. Batteries should not be
•
Operate only from the power source specified on the
exposed to excessive heat such as sunshine, fire or the
AC adaptor.
like.
The power adaptor may become hot during normal
Lightning
•
operation. This is not a mafuction.
•
In case of storm and lightning or when
Please make sure that the adaptor is not coverd while
going on holiday, disconnect the power
in operation. Leave a space of 15 cm (minimum)
cord from the wall outlet.
around the AC adaptor.
•
Replacement Parts
the rating information and safety caution of the AC
When replacement parts are required, make sure that the
adaptor are provided on the adaptor.
WARNING: when the set is not in use for a long time.
service technician has used replacement parts, which are
disconnect from the power.
specified by the manufacturer or have the same
Power Cord
specifications as the original one. Unauthorized
substitutions may result in fire, electrical shock or other
Do not place the set, a piece of furniture, etc. on the power
hazards.
cord (mains lead) or pinch the cord. Handle the power cord
Servicing
by the plug. Do not unplug the appliance by pulling from
the power cord and never touch the power cord with wet
Please refer all servicing to qualified
hands as this could cause a short circuit or electric shock.
personnel. Do not remove the cover
Never make a knot in the cord or tie it with other cords.
yourself as this may result in an electric
The power cords should be placed in such a way that they
shock.
are not likely to be stepped on, A damaged power cord can
Waste Disposal
cause fire or give you an electric shock. When it is
•
damaged and needs to be replaced, it should be done by
Instructions for waste disposal:
Packaging and packaging aids are recyclable and should
qualified personnel.
principally be recycled. Packaging materials, such as foil
Moisture and Water
bag, must be kept away from children. Batteries, including
Do not use this device in a humid and
those which are heavy metal-free, should not be disposed
damp place (avoid the bathroom, the
of with household waste. Please dispose of used battery in
sink in the kitchen, and near the
an environment friendly manner. Find out about the legal
washing machine). Do not expose
regulations which apply in your area.
this device to rain or water, as this
• Don´t try to recharge batteries. Danger of explosion.
may be dangerous and do not place
Replace batteries only with the same or equivalent type.
objects filled with liquids, such as flower vases, on top.
This symbol on the product or on its
Avoid from dripping or splashing. If any solid object or
packaging means that your electrical
liquid falls into the cabinet, unplug the TV and have it
and electronic device should be
checked by qualified personnel before operating it any
disposed at the end of its service life
further.
separately from your household
Cleaning
wastes. There are separate
collection systems for recycling in EU. For more
Before cleaning, unplug the TV set
information, please contact the local authority or the dealer
from the wall outlet. Do not use
where you purchased the product.
liquid or aerosol cleaners. Use soft
and dry cloth.
Disconnecting the Device
Ventilation
The mains plug is used to disconnect TV set from the
mains and therefore it must remain readily operable.
The slots and openings on the TV set ate intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.
4
The Standby Off/On button doesn´t separate this device
Headphone Volume
completely from mains. Moreover the device consumes
Excessive sound pressure from earphones
power in the standby operation. In order to separate the
and headphones can cause hearing loss.
device completely from mains, the mains plug has to be
Installation
pulled from the mains socket. Because of that the device
To prevent injury, this device must be securely attached to
should be set up in a way, that an unobstructed access to
the wall in accordance with the installation instructions
mains socket is guaranteed, so that in case of emergency
when mounted to the wall ( if the option is available)
the mains plug can be pulled immediately. To exclude the
LCD Screen
danger of fire, the power cord should principally be
separated from the mains socket prior to a longer period of
The LCS panelô is a very high technology product with
non-usage, i.e. during vacations.
about a million thin film transistors, giving you fine picture
details. Occasionally, a few non-active pixels may appear
Electrical device not in the hands of
on the screen as a fixed blue, green or red point. Please
children
note that this does not effect the performance of your
Never let children use electrical device unsupervised.
product.
Children can´t always recognize properly the possible
Warning! Do not leave your TV in standby or operating
dangers. Batteries/ accumulators can be life threatening
mode when you leave your house.
when swallowed. Store batteries unreachable for small
Connection to a Television
children. In case of swallowing a battery medical aid has to
be sought immediately. Also keep the packaging foils away
Distribution System ( Cable TV etc.)
from children. There is danger of suffocation.
from Tuner
Licence Notification (optional)
Device connected to the protective earthing of the building
Manufactured under license from Dolby Laboratotries.
installation through the mains connection or through other
apparatus with a connection to protective earthing-and to a
TRADEMARK ACKNOWLEDGMENT
television distribution system using coaxial cable, may in
“Dolby” nad the double – D symbol are
some circumstances create a fire hazard.
tradematks of Dolby Laboratories.
Connection to a cable distribution system has therefore to
be provided through a device providing electrical isolation
below a certain frequency range (galvanic isolator, see EN
60728-11).
Note: The HDMI connection between PC and TV may
cause radio interference in which case it is recommended
to use VGA (DSUB-15) connection.
5
Package Contents
Environmental Information
• This television is designed to consume less energy to
save environment.
You not only help to save the environment but also you
can save money by reducing electricity bills thanks to the
energy efficiency feauture of this TV. To reduce energy
consumption, you should take the following steps:
• You can Power Save Mode setting, located in the
Feature menu. If you set Power Save Mode as On, the TV
will switch to energy- saving mode and luminance level of
TV set will be decreased to optimum level. Note that some
picture settings will be unavailable to be changed when the
TV is in Power Save Mode.
•
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.
•
Disconnect power when going away for longer time.
•
Note that annually , using the TV set in Power Save
Mode has more efficiency than disconnecting the TV
from the mains plug instead of keeping stand-by
mode. Therefore it is highly recommended to active
Power Save Mode setting to reduce your annual
power consumption. And also it is recommended to
disconnect the TV from the mains plug to save
energy more when you do not use.
•
Please help us to safe environment by following these
steps.
Repair Information
Please refer all servicing to qualified personnel. Only
qualified personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for
further information.
Note: You should check the accessories after purchasing.
Make sure that each accessory is included.
6
Remote Control Buttons
1.
Standby
2.
Image size/ Expand (in TXT mode)
3.
Sleep timer
4.
Numeric buttons
5.
Return/ Exit (in DTV mode)/ Index page (in TXT
mode)
6.
Cursor up/ Page up (in TXT mode)
7.
Cursor left
8.
Programme up (Page down in DTV mode)
9.
Programme down (Page up in DTV mode)
10. Mono-Stereo / Dual I-II / Current language
11. Previous Programme/ Swap
12. Electronic programme guide
13. Info/ Reveal (in TXT mode)
14. Picture mode selection
15. Source selection
16. Red button / Zoom videos (in Media Browser video
video mode)
17. Green button
18. Yellow button
19. Menu on-off
20. Blue button
21. OK / Edit Channel list / Hold (in TXT mode)
22. Cursor right / Subpage ( in TXT mode)
23. Cursor down / Page down (in TXT mode)
24. Volume up
25. Volume down
26. Mute
27. Teletext/ Mix
28. Subtitle on-off (in DTV mode) / TXT Subtitle
29. FAV (*) (Favourite Selection) (in DTV mode)
30. No Function
31. Media Browser playback buttons. (in DTV mode)
(*) Only for EU country option.
Note: Buttons that are not indicated with a number on the
remote control illustration are not functional on TV mode.
7
1. HDMI 1: HDMI Input
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capavle of displaying High Definition picture from
devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component
Socket. These sockets can accept either 720p or 1080p (Optional) signals. No sound connection is needed for an HDMI to HDMI connection.
2.
RF Input connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an
appropriate antenna cable, as shown in the illustration in the following pages.
3.
Scart input or output for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your
external device ( such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Note: S-VHS signal is supported via the scart socket.
4.
PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on yout PC.
Note: You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via PC input.
5.
S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.
8
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input
6. DC 12 V Input is used for connecting the supplied power adaptor.
Viewing the Connections – Side Connectors
1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe
to. For more information, see “Conditional Access” section.
2. Side USB input.
3. TV control buttons.
4. Side audio-video connection input is used for connecting video and audio signals
of external devices. To make a video connection, you must use the supplied AV
connection cable for enabling connection. First, plug singular jack of the cable to the
TV´s Side AV socket. Afterwards, insert your video cable´s ( not supplied) connector
into the YELLOW input (located on the plural side) of the supplied AV connection cable.
Colours of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV
connection cable. Afterwards, insert your device´s audio cable´s connectors into the RED
and WHITE jack of the supplied side AV connection cable. Colours of the connected
jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound
connection when connecting a device to your TV by using PC or COMPONENT VIDEO input.
5. Headphone jack is used for connecting an external headphone to the system. Connect to the
HEADPHONE jack to listen to the TV from headphones (optional).
Power Connection
IMPORTANT: The TV set is designed to operate on 12 V DC. For this, an adaptor is used which
gives 12 V voltage. Connect this adaptor to a system that supplies 110-240V AC, 50/60Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect
the set to the mains.
9
reguirements. Resolution information can be found in the
Using Digital Multimedia Connectors
•
appendix parts.
You can connect USB devices to your TV by using the USB
input of the TV. This feature allows you to display/ play JPG,
MP3 and video files stored in a USB stick.
•
It is possible that certain types of USB devices ( e.g. MP3
Players) may not be compatible with this TV.
•
You may back up your files before making any connections to
the TV set in order to avoid any possible data loss. Note that
manufacturer will not be responsible for any file damage or data
loss.
•
Do not pull out USB module while playing a file.
CAUTION: Quickly plugging and unplugging USB devices,
is a very hazardous operation. Especially, do not repeatedly
quickly plug and unplug the drive. This may cause physical
damage to the USB player and especially the USB device
itself.
Using Side AV Connectors
You can connect a range of optional aquipment to your LCD TV
USB Memory Connection
using side connectors of the TV.
•
IMPORTATN: The TV should be switched off while
For connecting a camcorder or camera, you should use AV
plugging or unplugging a USB device. Plug your USB devices
socket (side). To do this, you must use the supplied video/audio
to the USB input of the TV. You can connect a usb devices to
connection cable. First, plug single jack of the cable to the TV´s
the USB input of the TV. You can connect a usb device to your
AV IN socket (side). Afterwards, insert your camera cable´s (not
TV by using the USB input of the TV.
supplied) connectors into the plural part of the video/ audio
Note: It is possible certain types of hard disk drives are not
connection cable. Colours of the connected jacks should match.
See illustration below.
supported.
•
Connecting the LCD TV to a PC
Afterwards, you should switch do Side AV source. See the
section Input selection in the following sections for more
For displaying your computer´s screen image on your LCD TV,
information.
you can connect your computer to the TV set. Power off both
computer and display before making any connections. Use 15pin D-sub display cable to connect a PC to the LCD TV. When
the connection is made, switch to PC source. See “Input
selection” section. Set the resolution that suits your viewing
•
To listen the TV sound from headphones, you should connect
headphones to your TV by using the HEADPHONE jack as
illustrated above.
Connecting to a DVD Player via HDMI
Please refer to your DVD player´s instruction book for
additional information. Power off both the TV and the device
•
before making any connections.
to the connected HDMI source. See, Input Selection section for
Note: Not all cables shown in the illustration are supplied.
•
When you connect to DVD player as illustrated above, switch
more information on changing sources.
If your DVD player has an HDMI socket, you can connect
via HDMI for better video and audio quality.
10
•
Connecting to a DVD Player via
Note: These three methods of connection perform the same
function but in different levels of quality. It is not necessary to
Component Sockets (YPbPr) or Scart
connect by all three methods.
Cable
•
Some DVD players are connected through COMPONENT
Remote Control Handset
SOCKETS (YPbPr). YPbPr can be used only when you connect
Inserting Batteries
a device that has a YPbPr to PC cable (YPbPr cable is not
supplied).
•
•
“Input selection” section.
•
Remove the battery cover located on the back of the handset
by gently pulling backwards from the indicated part.
When the connection is made, switch to YPbPr source. See,
•
Insert two AAA/R3 or equivalent type batteries inside.
Observe the correct polarity (+/-) when inserting batteries and
To enable audio connection, use the VGA/ Component
replace the battery cover.
Audio cable. First, plug single jack of the cable to the TV.
Afterwards, insert your DVD player´s audio cable´s connectors
into the plural part of the VGA/Component audio connection
cable (see illustration below). Colours of the connected jacks
should match (RED & WHITE).
•
When the connection is made, switch to YPbPr source. See,
Input selection section.
•
Note: Remove the battery from remote control handset when it
You may also connect through the SCART
is not to be used for a long period. Otherwise it can be damaged
input.
due to any leakage of batteries. Remote range is approximately
7m/23ft.
Switching On/Off
To switch the TV On
•
Connect the poser cord to the 110-240V AC, 50/60 Hz. Then
the standby LED lights up. ( The led will blink during the
standby On/Off)
•
•
To switch on the TV from standby mode either:
•
Press the
the remote
•
•
button, P+/ P- or a numeric button on
control.
Press the button, - or + button on the TV. The TV will then
switch on.
•
Note: If you switch on your TV via PROGRAM UP/ DOWN
•
buttons on the remote control or on the TV set, the program that
you were watching last will be reselected.
•
By either method the TV will switch on.
•
To Switch the TV Off
•
•
Press the button on the remote control or press the
switch on the TV, so the TV will switch to standby
•
mode.
•
•
To power down the TV completely, unplug the power cord
from the mains socket.
•
Note: When the TV is switched to standby mode, standby LED
•
can blink to indicate that features such as Standby Search, Over
Air Download or Timer is active.
•
11
Input Selection
Volume Setting
Once you have connected external systems to your TV, you can
•
switch to different input sources. Press “SOURCE” button on
Press “V+” buttons to increase the volume. Press “V-“
button to decrease the volume. A volume level scale
your remote control consecutively for directly changing sources.
(slider) will be displayed on the screen.
Program Selection (Previous or Next
Program)
•
Press “P-“ button to select the previous program.
•
Press “P+” button to select the next program.
Program Selection (Direct Access)
•
Press numeric buttons on the remote control to select
programs between 0 and 9. the TV will switch to the
selected program. To select programs between, press the
numeric buttons consecutively. When the pressing time is
due for the second numeric button, only the first digit
program will be displayed. Press directly the program
number to reselect single digit programs.
Viewing Electronic Program Guide (EPG)
You can view the electronic program guide (EPG) to view
information about available programs. To view the EPG menu
please press EPG button on the remote control.
Note: YPbPr mode can be used only when you connect a device
•
Press
buttons to navigate through channels.
that has a YPbPr output through the PC input with YPbPr to PC
•
Press
buttons to navigate through the program list.
cable (not supplied).
•
EPG menu displays available information on all channels.
Basic Operations
•
Please note that event information is updated
You can operate your TV using both the remote control and
automatically. If there are no event information data
onset buttons.
available for channels, EPG will be displayed with
Operation with the Buttons on the TV
blanks.
Main menu OSD cannot be displayed via control buttons “+/-“
buttons will perform as default after a short while.
Volume Setting
•
Press “P/V/AV” button once and then use “+/-“ buttons to
increase or decrease volume, so a volume level scale
(slider) will be displayed on the screen. While Tv is on, +/button can use as volume + or volume – as default.
Program Selection
OK (Options): Displays program options including
•
“Select Channel” option.
Press “P/V/AV” button once and then use “+/-“ buttons to
change channel. By pressing “+/-“ button, you can select
INFO (Event Details): Displays the programs in detail.
the next or previous program.
Green button: Program schedule will be listed
Yellow button: Display EPG data in accordane with timeline
AV Mode
schedule.
•
Hold the “P/V/AV” button, source OSD will be displayed
in a few second.
Operation with the Remote Control
•
The remote control of your TV is designed to control all
the functions of the model you selected. The functions will
be described in accordance with the menu system of your
TV.
12
Blue button (Filter): Views filtering options.
First Time Installation
IMPORTANT: Ensure that the aerial is connected before
switching on the TV for the first time installation.
•
When the TV is operated for the first time, installation
wizard will guide you through the process. First, language
selection screen will be displayed:
Red button (Prev Time Slice): Displays the programs of
previous time slice.
Green button (Next Time Slice): Displays the programs of the
next time slice.
Yellow button (Prev Day): Displays the programs of previous
day.
Blue button (Next Day): Displays the programs of the next day.
Numeric buttons (Jump): Jumps to the preferred channel
•
directly via numeric buttons.
Use
buttons to select your language
OK (Options): Displays program options including “Select
and press OK button to set selected language and
Channel” option.
continue.
•
Text button (Filter): Views filtering options.
After selecting the language, “Welcome!” screen will be
displayed, requiring you to set Country, Teletext
INFO (Details): Displays the programs in detail.
Language and Scan Encrypted options.
•
Red buttons (Prev Day): Display the programs of previous day.
Green button (Next day): Display the programs of the next
By pressing
button, select the country you
want to set and press
button to highlight Teletext
day.
Language option. Use
Yellow button (Zoom): Expands program information.
desired Teletext Language.
•
Blue button (Filter): Views filtering options.
INFO (Details): Displays the programs
in detail.
Press
button to select
button after setting Teletext Language
option. Scan Encrypted will be then highlighted. You can
Numeric buttons (Jump): Jumps to the preferred channel
set Scan Encrypted as Yes if you want to scan coded
directly via numeric buttons.
station. Afterwards select the desired Teletext Language.
•
OK (Options): Displays program options including “Select
Channel” option.
Press OK button on the remote control to continue and the
following message will be displayed on the screen:
Text (Search): Displays “Guide Search” menu.
SUBTTILE: Press SUBTITLE button to view Select Genre
menu. Using this feature, you can search the program guide
database in accordance with the genre. Info available in the
program guide will be searched and results matching your
criteria will be listed.
(Now): Shows the current program.
13
Installation
Press “MENU” button on the remote control and select
Installation by using
button. Press OK button
and the following menu screen will be displayed.
To select the “Yes” or “No” option, highlight the item by using
buttons and press OK button.
Afterwards, the following OSD will be displayed on the screen
and the digital television will search for digital terrestrial TV
broadcasts.
Select Automatic Channel Scan (Retune) by using
button and press OK button. Automatic Channel Scan (Retune)
options will be displayed. You can select Digital Aerial,
Note: You can press “MENU” button to cancel.
Analogue or Digital Aerial- Analogue tuning using
•
After all the available stations are stored, Channel List will
and OK buttons.
be displayed on the screen. If you like the sort channels,
Automatic Channel Scan (Retune) Menu
according to the LCN, please select “YES” and than press
Operation
“OK”.
Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analogue stations.
Full: Searches and stores both analogue and aerial DVB stations.
•
Whenever you select an automatic search type and press
OK button, a confirmation screen will appear on the
screen. To start installation process, select Yes, to cancel
select No by using.
•
•
and OK button.
After auto channel scan type is set and selected and
confirmed, installation process will start and progress bar
Press OK button to quit channel list and watch TV.
will move along. Press “MENU” button to cancel process.
In such a case, located channels are not stored.
Manual Tuning
HINT: This feature can be used for direct broadcast entry.
•
Select Manual Channel Scan from the Installation menu
by using
and OK buttons. Manual Scan
options screen will be displayed.
•
Select the desired Search Type using
or
button. Manual search option will change accordingly. Use
button to highlight an item and then press
to
button to set an option. You can press
“MENU” button to cancel.
14
Digital Manual Search
Press OK to cancel. Select Yes by pressing
button and press OK to delete all of the channels.
Managing Stations: Channel List
In manual channel scan, the number of the multiplex or
frequency are entered manually and only that multiplex or
The TV sort all stored stations in the Channel List. You can edit
frequency are searched for the channels. After selecting search
this channel list, set favourites or set active stations to be listed
type as Digital, you can enter the multiplex or frequency are
by using the Channel List options.
searched for the channels. After selecting search type as Digital,
•
Press “MENU” button to view main menu. Select Channel
you can enter the multiplex or frequency number using the
List item by using
numeric buttons and press OK button to search.
view menu contents.
button. Press OK to
Analogue Manual Search
After selecting search type as analogue, you can use
Select Edit Channel List to manage all stored channels. Use
button to highlight an item and then press
OK
button to set an option.
and OK buttons to select Edit Channel List.
Operating the Channel List
Enter the channel number or frequency using the numeric
buttons. You can then press OK button to search. When the
channel is located, any new channels that are not on the list will
be stored.
Analogue Fine Tune
•
Select Analogue Fine Tune from the Installation menu by
using
and OK buttons.
Analogue fine tune screen will be displayed. Analogue
Fine Tune feature will not be available if there are no
•
analogue channels, digital channels and external sources
button to select the channel that
will be processed. Press
stored.
•
Press
button to select a
function on Channel List menu.
Press OK button to proceed. Use
•
Use P+/P- buttons to move page up or down.
button to set Fine Tune. When finished, press OK button
•
Press BLUE button to view filtering options.
again.
•
Press “MENU” button to exit
Clear Service List (*)
Moving a Channel
(*) This setting is visible only when the Country option is
•
set to Denmark, Sweden, Norway or Finland.
Use this setting to cleat channels stored. Press
First select the desired channel. Select Move option in the
channel list and press OK button.
•
or
button to select Clear Service List and then press OK. The
Edit Number screen will be displayed. Enter the desired
channel number by using the numeric buttons on the
following OSD message will be displayed on the screen:
remote control. If there is a previously
15
•
stored channel on that number, a warning screen will be
Managing Stations: Favourites
displayed. Select Yes if you want to move the channel and
You can create a list of favourite programs.
press OK.
•
•
Press OK button to process. Selected channel is now
List item by using
moved.
button. Press OK to
view menu contents.
Deleting a Channel
•
Select Favourites to manage favourite list. Use
and OK buttons to select Favourites.
You can press GREEN button to tag/ untag all channels,
•
YELLOW button to tag/ untag channel.
•
Press “MENU” button to view main menu. Select Channel
Select the channel that you want to delete and select Delete
You can set various channels as favourites so that only the
favourite channels are navigated.
option. Press OK button to continue.
•
A warning screen will appear. Select YES to delete, select
No to cancel. Press OK button to continue.
Renaming a Channel
•
Select the channel that you want to rename and select Edit
Name option. Press OK button to continue.
•
Pressing
button moves to the
previous/next character. Pressing
button toggles the current character, i.e., “b” character becomes
“a” by
and “c” by
Pressing the numeric buttons
•
“0…9” replaces the highlighted character with the characters
Select a channel by using
button. Press OK
printed above the button is pressed.
button to add selected channel to favourites list. Press OK
•
button again to remove.
When finished, press OK button to save. Press “MENU”
Button Functions
to cancel.
Locking a Channel
•
OK: Add/ remove a station.
You can press GREEN button to tag/ untag all channels:
•
YELLOW: Tag/ untag a channel.
YELLOW button to tag/ untag a single channel.
•
GEERN: Tag/ untag all channels.
•
Select the channel that you want to lock and select Lock
•
BLUE: Displays filtering options.
option. Press OK button to continue.
Managing Stations: Sorting Channel List
You will be asked to enter parental control PIN. Default
You can select broadcasts to be listed in the channel list. To
PIN is set as 0000. Enter the PIN number.
display specific types of broadcast, you should use Active
•
channel list setting.
Select Active channel list from the Channel list menu by using
button
•
. Press OK button to continue.
Press OK button when the desired channel is highlighted to
lock/ unlock the channel. Lock symbol will be displayed
next to the selected channel.
You can select a broadcast type option from the list by using
and OK buttons.
16
ON-Screen Information
You can press “INFO” button to display on-screen information.
Details of the station and current program will be displayed on
the information banner.
The information banner gives information on the channel
selected and the programs on it. The name of the channel is
When you select Videos from the main options, available video
displayed, along with its channel list number. Hint: Not all
files will be filtered and listed on this screen. You can use
channels broadcast the program data. If the name and time of the
button to select a video file and press
program are not available, then information banner will be
OK button to play a video. If you select a subtitle file and press
displayed with blanks.
OK button , you can select or deselect that subtitle file.
If the selected channel is locked, you must enter the correct fourdigit numeric code to view the channel (default code is 0000).
Jump (Numeric buttons): The TV will jump to the
“Enter PIN” will be displayed on the screen in such a case:
file starting with the letter you input via the numeric buttons on
Media Playback Using Media Browser
your remote control.
Play This (OK button): Plays the selected file.
If the USB stick is not recognized after power off/on or First
Play (
Time Installation, first, plug the USB device out and power
off/on the TV set. Plug the USB device in again.
Lang (Play Preview): Display selected file in a small preview
To display Media Browser window, press either “MENU”
screen.
button on the remote control and then select Media Browser by
pressing
button) : Plays all media files starting with selected
one.
INFO: Change filter options.
button. Press OK button to
FAV: Sorts files by name.
continue. Media Browser menu options will be displayed.
The following menu will be displayed while playing a video file:
Also, when you plug USB devices, media browser screen will
be displayed automatically:
Play (
button): Starts the video playback.
Stop (
button): Stops the video playback.
Pause (
button): Pause the video playback.
Rewind (
Forward (
button ): Goes backward.
button): Goes forward.
Subtitle/ Audio (LANG. button): Sets subtitle/ Audio.
Yellow: Opens subtitle time correction menu
You cam play music, picture and video files from the connected
USB memory stick. Use
button to select
Videos, Photos, Music or Settings.
Viewing Videos via USB
Press RETURN button to switch back to previous menu.
17
INFO: Displays help screen.
Viewing Photos via USB
When you select Photos from the main options, available image
Viewing Music via USB
files will be filtered and listed on this screen.
When you select Music from the main options, available audio
files will be filtered and listed on this screen.
Jump (Numeric buttons): Jump to selected file using the
numeric buttons.
0..9 (Numeric buttons): The TV will jump to the file starting
OK: Views the selected picture in full screen.
Slideshow (
with the letter you input via the numeric buttons on your remote
button): Starts the
control.
slideshow using all images.
Play This (OK button): Plays the selected file.
Loop/ Shuffle (GREEN button): Press once to enable Loop.
Press again to enable both Loop and Shuffle. Press once more
enable only Shuffle. Press again to disable all. You can follow
the disabled functions with the change of the icons.
RED: Sorts files by date.
GREEN: Views images in thumbnails.
Previous/ Next (Left/Right buttons): Jumps to previous or next
INFO: Changes filter options.
file to play.
BLUE: Switch between music, photo, video and all
FAV: Sorts files by Title, Artist or Album.
YELLOW: Change view style
Note: If the Viewing Style is set to Folder in Media Browser
Slide Options
Settings, Music folder will be displayed as sorted and there is no
need to sort files again by pressing FAV button.
INFO: Changes filter options.
Loop/Shuffle (Blue button): Press once to disable Loop. Press
again to disable both Loop and Shuffle. Press once more to
enable only Shuffle. Press again to enable all. You can follow
the disabled functions with the change of the icons.
Zoom (RED button): Zooms picture.
Media Browser Settings
Previous /next (Left/ Right buttons): Jumps to previous or next
file on slideshow.
Rotate ( Up/ Down buttons): Rotates the image using up/ down
buttons.
Loop/ Shuffle (GREEN button): Press once to disable Loop.
Press again to disable both Loop and Shuffle. Press once mote to
enable only Shuffle. Press again to enable all. You can follow
the disabled functions with the change of the icons.
RETURN: Back to file list.
18
View Style: Sets default browsing mode.
Slide Show Interval: Sets slide show interval time.
Show Subtitle: Sets subtitle enabling preference.
Subtitle Language: Sets supported subtitle language.
Subtitle Position: Sets subtitle position as up or down.
Subtitle Front Size: Sets subtitle front size (max. 54pt).
Changing Image Size: Picture Formats
•
You can change the aspect ratio (image size) of the TV for
viewing the picture in different zoom modes.
•
Press “SCREEN” button repeatedly to change the image
size. Available zoom modes are listed below.
Auto
When AUTO is selected, the aspect ratio of the screen is
adjusted by the information provided by the selected source (if
available).
The format being displayed in AUTO mose is completely
independent of WSS information which could be included in the
broadcast signal or the signal from an external device.
Note: Auto mode only will be available in HDMI, YPbPr and
DTV sources.
16:9
This uniformly stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the wide TV screen.
•
For 16:9 aspect ratio pictures that have been squeezed into
a normal picture (4:3 aspect ratio), use the 16:9 mode to
restore the picture to it ´s original shape.
Panoramic
Subtitle
This stretches the left and right sides of a normal picture (4:3
This zooms up the wide picture (16:9 aspect ratio) with subtitles
aspect ratio) to fill the screen, without making the picture appear
to the full screen.
unnatural.
19
Contrast: Sets the lightness and darkness values of the screen.
Brightness: Setts the brightness values for the screen.
Sharpness: Sets the sharpness value for the objects displayed on
the screen.
Color: Sets the color value, adjusting the colors.
Color Shift: Adjust the desired color tone.
Color Temp: Sets the desired color tone.
Setting Cool option gives white colors a slight blue stress.
The top and bottom of the picture are slightly cut off.
For normal colors, select Normal option.
Cinema
Setting Warm option gives white colors a slight red stress.
Noise Reduction: If the broadcast signal is weak and the picture
This zooms up the wide picture (16:9 aspect ratio) to the full
is noisy, use Noise Reduction setting to reduce the noise
screen.
amount. Noise Reduction can be set to one of these options:
Low, Medium, High or Off.
Game mode: When Game Mode is set to On, specific game
mode settings, which are optimized for better video quality, will
be loaded.
Note: When Game Mode is on, some items in the Picture
Settings menu will be unavailable to be set.
Picture Zoom: Sets the picture size to Auto, 16:9, Subtitle, 14:9,
14:9 Zoom, 4:3, Panoramic or Cinema.
Reset: Resets the picture settings to factory default settings.
While in VGA (PC) mode, some items in Picture menu will be
unavailable. Instead, VGA mode settings will be added to the
Picture Settings while in PC mode.
Configuring Picture Settings
PC Picture Settings
You can use different picture settings in detail. Press “MENU”
For adjusting PC picture items, do the following: Press
button and select the Picture icon by using
button to select Picture icon. Picture menu
button. Press OK button to view Picture Settings menu.
appears on the screen.
Contrast, Brightness, Color, Color Temp and Picture Zoom
settings in this menu are identical to settings defined in TV
picture menu under “Main Menu System”.
Sound, Settings and Source settings are identical to the settings
explained in main menu system.
PC Position: Select this to display PC position menu items.
Operating Picture Settings Menu Items
Picture Settings Menu Items
Mode: For your viewing requirements, you can set the related
mode option. Picture mode can be set to one of these options:
Cinema, Game, Dynamic and Natural.
20
Equalizer: Press OK button to view equalizer submenu.
Autoposition: Automatically optimizes the display. Press OK to
optimize.
H Position: This item shifts the image horizontally to right hand
side or left hand side of the screen.
V Position: This item shift the image vertically towards the top
or bottom of the screen
In equalizer menu, the preset can be changed to Music, Movie,
Dot Clock: Dot Clock adjustments correct the interference that
Speech, Flat, Classic and User. Press the “MENU” button to
appear as vertical banding in dot intensive presentations like
return to the previous menu.
spreadsheets or paragraphs or text in smaller fonts.
Note: Equalizer menu settings can be changed manually only
Phase: Depending on the resolution and scan frequency that you
when the Equalizer Mode in User.
input to the TV set, you may see a hazy or noisy picture on the
Balance: This setting is used for emphasizing left or right
screen. In such a case you can use this item to get a clear picture
speaker balance.
Headphone: Sets headphone volume.
by trial and error method.
AVL: Automatic Volume Limiting (AVL) function sets the
Configuring Sound Settings
sound to obtain fixed output level between programs (For
Sound settings can be configured according to your personal
instance, volume level of advertisements tend to be louder than
preferences.
programs).
Press “MENU” button and select the first icon by using
Dynamic Bass: Dynamic Bass is used to increase bass effect of
button. Press OK button to view Sound
the TV set.
Settings menu.
Digital Out: Sets digital out audio type.
Configuring Your TV´s Settings
Detailed settings can be configured to suit your personal
preferences.
Press “MENU” button and select Settings icon by using
button. Press OK button to view Settings menu.
Operating Sound Settings Menu Items
•
Press
button to highlight a menu
item.
•
Use
•
Press “MENU” button to exit.
button to set an item.
Sound Settings Menu Items
Volume: Adjusts volume level.
21
Operating Settings Menu Items
Configuring Language Preferences
•
Press
You can operate the TV´s language settings using this menu.
•
Press OK button to select an item.
•
Press “MENU” button to exit.
button to highlight a menu item.
Press “MENU” button and select the fifth icon by using
button. Press OK button to view Settings menu.
Use
Settings Menu Items
button to highlight Language and press OK
to continue:
Conditional Access: Controls conditional access modules when
available.
Language: Configures language settings.
Parental: Configures parental settings.
Timers: Sets timers for selected programs.
Date/Time: Sets date and time.
Sources: Enables or disables selected source options.
Other Settings: Displays other setting options of the TV set.
Using a Conditional Access Module
IMPORTANT: Insert or remove the CI module only when
the TV is SWITCHED OFF.
•
Use
In order to watch certain digital channels, a conditional
access module (CAM) can be necessary. This module must
Menu: display the system language.
be inserted in the CI slot of your TV.
•
•
•
Obtain the Conditional Access Module (CAM) and the
Preferred
viewing card by subscribing to a pay channel company,
These settings will be used if available. Otherwise the current
then insert those to the TV using the following procedure.
settings will be used.
Insert the CAM and then the viewing card to the slot that is
•
Audio: Sets the preferred audio language.
located in the terminal cover at the rear side of the TV.
•
Subtitle: Sets the subtitle language. Selected language will
insert fully if reversed. The CAM or the TV terminal may
•
Teletext: Sets teletext language.
be damaged if the CAM is forcefully inserted.
•
Guide: Sets the preferred Guide language.
The CAM should be correctly inserted, it is impossible to
be seen in subtitles.
Connect the TV to the mains supply, switch on and then wait for
Current (*)
few moments until the card is activated.
•
(*) These settings can be changed if only the broadcaster
When no module is inserted, “No Common Interface
supports. Otherwise, settings will not be available to be changed.
module detected” message appears on the screen.
•
button to set an item. Settings are stored
automatically.
Audio: Changes the audio language for the current channel.
Refer to the module instruction manual for details of the
•
settings.
Note: If the Country option is set to Denmark, Sweden, Norway
Viewing Conditional Access Menu (*)
or Finland, the Language Settings menu will function as
(*) These menu settings may change depending on the service
described below:
provider.
Press “MENU” button and select the icon by
using
Subtitle: Sets the subtitle language for the current channel.
button. Press OK
button to view Settings menu. Use
button to highlight Conditional Access and press OK to view
menu items.
22
Language Settings
Parental Settings Menu Operation
•
Select an item by using
•
Use
•
Press OK button to view more options.
button.
button to set an item.
Menu Lock: Menu lock setting enables or disables the menu
access. You can disable access to the installation menu or the
In the configuration menu, highlight the Language Settings item
whole menu system.
by pressing
Maturity Lock (optional): When set, this option gets the
buttons. Press OK and Language Settings submenu will be
maturity information form the broadcast and if this maturity
displayed on the screen:
Use
level is disabled, disables access to the broadcast.
buttons to highlight the menu item that will be
adjusted and then press
Child Lock (optional): When Child Lock is set, the TV can
button to set.
only be controlled by the remote control. In this case the control
Notes:
•
•
•
panel buttons will not work, except for the Standby Off/On
System Language determines the on-screen menu
button. When Child Lock is activated you are able to switch the
language.
TV into Standby mode with the Standby mode with the Standby
Audio Language is used for selecting the soundtrack of a
Off/On button. To switch the TV on again, you need the remote
channels.
control. Hence, if one of those buttons is pressed. Child Lock Is
Primary settings are the first priority when multiple choices
On will be displayed on the screen when the menu screen is not
are available on a broadcast. Secondary settings are the
visible.
alternatives when the first options are not available.
Set PIN: Defines a new PIN number. Use numeric buttons to
enter a new pin number. You will need to code your new pin a
Parental Control
second time for verification purposes.
To prohibit viewing of certain programs, channels and menus
IMPORTANT: The factory default pin number is 000, if you
can be locked by using the parental control system.
change the pin number make sure you write it down and keep it
This function enables or disables the menu protection system
safe.
and allows the PIN code to be changed.
Timers
Press “MENU” button and select the icon by using
To view Timers menu, press “MENU” button and select
button. Press OK button to view Settings menu.
Use
Channel List icon by using
button to highlight Parental and press OK to
button. Press OK button
to view Channel List menu. Use
continue:
button to
highlight Timers and press OK to continue:
Setting Sleep Timer
This setting is used for setting the TV to turn off after a certain
time.
To display parental lock menu options, PIN number should be
•
Highlight Sleep Timer by using
•
Use
button.
button to set. The timer can be
entered. Factory default PIN number is 0000. After coding the
programmed between Off and 2.00 hours (120 minutes) in
correct PIN number, parental settings menu will be displayed:
steps of 30 minutes.
23
Setting Program Timers
Configuring Date/ Time Settings
You can set program timers for a particular program using this
Select Date/Time in the Settings menu to configure Date/Time
feature.
settings. Press OK button.
Press
button to set timers on an event. Program timer
function buttons will be displayed on the screen.
Adding a Timer
•
Press YELLOW button on the remote control to add a
timer. The following menu appears on the screen:
Channel: Changes network type by using
Timer Type: This feature is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric buttons.
End: Enter an ending time using the numeric buttons.
•
Duration: Displays duration between the starting and ending
buttons to highlight
Date/Time.
time.
Date, Time, Time Settings Mode and Time Zone Setting will be
Repeat: Sets a timer to be repeated as Once, Daily or Weekly.
Use
•
Use
available.
buttons to select an option.
Press GREEN button to save the timer. Press RED button
Use
to cancel.
Settings Mode. Time Settings Mode is set using
buttons to highlight the Time
Change/ Delete: Controls parental settings on timers.
buttons. It can be
Editing a Timer
•
or MANUAL.
Select the timer you want to edit by pressing
When AUTO is selected, Date/Time and Time Zone options will
not be available to be set. If MANUAL option is selected as the
button.
•
Time Zone can be altered:
Press GREEN button. Edit Timer menu screen will be
•
displayed.
•
By pressing
buttons select Time
Zone. Use
buttons to change the
When finished with editing, press GREEN button to save.
You can press “MENU” button to cancel.
Time Zone between GMT-12 or GMT+12. Date/Time on
Deleting a Timer
•
set to AUTO
the top of the menu list will then change according to the
Select the timer you want to delete by pressing
selected Time Zone.
•
button.
•
Press RED button.
•
Select YES by using
Changes are automatically stored. Press “MENU” to exit.
Configuring Source Settings
You can enables or disable selected source options. The TV will
buttons to
not switch to the disabled source options when “SOURCE”
delete the timer. Select NO to cancel.
button is pressed.
24
proper operation, please ensure that the TV is set to standby
mode.
•
Select Sources in the Settings menu and press OK button.
•
Press
•
Use
buttons to select a source.
button to enable or disable
the selected source. Changes ate automatically stores.
Note: YPbPr mode can be used only when you connect a device
You can enable or disable automatic upgrade by setting
that had a YPbPr output through the PC input with YPbPr to PC
Automatic Scanning option.
cable (not supplied).
You can manually search for new software by selecting Scan for
Configuring Other Settings
upgrade.
Hard of Hearing: If the broadcaster enables any special signal
To view general configuration preferences, select Other
concerning the audio, you can set this setting as On to receive
Settings in the Settings menu and press OK button.
such signals.
Audio Description: Audio description refers to an additional
narration track for blind and visually impaired viewers of visual
media, including television and movies. The description narrator
talks through the presentation, describing what is happening on
the screen during the natural pauses in the audio (and sometimes
during dialogue, if deemed necessary). You can use this feature,
only if the broadcaster supports that additional narration track.
Auto TV Off: You can set the timeout value of auto off feature.
After the timeout value is reached and the TV is not operated for
selected time, the TV will go off.
Standby Search (optional)
Use
Operation
and then press
•
Press
button to select Standby Search
button to set this setting as
On or Off. If you change Standby Search to Off, this function
buttons to select an item.
will be unavailable. To use Standby Search as On.
•
Use
•
Press OK button to view a sub-menu.
If the Standby Search is set to On, when the TV is in standby
button to set an option.
mode, available broadcasts will be searched. If the TV locates
any new or missing broadcasts, a menu screen will be displayed,
Menu Timeout: Changes timeout duration for menu screens.
asking you whether or not to execute these changes.
Scan Encrypted: When this setting is on, search process will
locate the encrypted channels as well. If it is set as Off,
encrypted channels will not be located in automatic search or
manual search.
Backlight (optional): This setting controls the backlight level
and it can be set Auto, Maximum, Minimum, Medium and Eco
Mode.
Power Save Mode: Use
button to
select Power Save Mode. Press
button
to set Power Save Mode as On or Off. See the section,
“Environmental Information “ in this manual for further
information on Power Save Mode.
Note: Backlight function will be invisible if Power Save Mode is
set to on.
Blue Background: Activates or deactivates blue background
system when the signal is weak or absent.
Software Upgrade: To ensure that your TV always has the most
update information, you can use this setting. In order for the
25
Other Features
is present. Pressing
Displaying TV Information: Program Number, Program Name,
commands will
request the next or previous page respectively.
Sound Indicator, time,. teletext, channel type and resolution
Tips
information is displayed on the screen when a new program is
Screen Care: Clean the screen with a slightly damp, soft cloth.
entered or “INFO” button is pressed.
Do not use abrasive solvents as they may damage the coating
Mute function: Press
button to display sound. Mute
layer of the TV screen. For your safety, unplug the mains plug
indicator will be displayed in the upper side of the screen. To
when cleaning the set. When moving the TV, hold it properly
cancel mute, there are two alternatives: the first one is pressing
from the bottom part.
the
Image Persistence: Please note that ghosting may occur while
button and the second one is increasing the
displaying a persistent image. LCD TVs´image persistence may
volume level.
disappear after a short time.
Picture Mode Selection: By pressing PRESETS button, you
Try turning off the TV for a while.
can change Picture Mode settings in accordance with your
To avoide this, do not leave the screen in still picture for
viewing requirements. Available options are Dynamic, Natural
extended periods.
and Cinema.
No Power: If your TV system has no power, please check the
Displaying Subtitles: You can enable subtitles by pressing the
main power cable and connection to the mains socket outlet.
SUBTITLE button of the remote control. Press SUBTITLE
Poor Picture: Have you selected the correct TV system? Is your
button again to disable subtitle function.
TV set or house aerial located too close to a non-earthed audio
Teletext
equipment or neon lights, etc.? Mountains or high buildings can
Teletext system transmits information such as news, sports and
cause double pictures or ghost images. Sometimes you can
weather on your TV. Note that is the signal degrades, for
improve the picture quality by changing the direction
example in poor/adverse weather conditions, some text errors
of the
aerial. Is the picture or teletext unrecognisable? Check if you
may occur or the teletext mode may be aborted.
have entered the correct frequency. Please retune the channels.
Teletext function buttons are listed below:
The picture quality may degrade when two peripherals are
Teletext/ Mix: Activates teletext mode when pressed
connected to the TV at the same time. In such a case, disconnect
once. Press again to place the teletext screen over the program
one of the peripherals.
(mix). Pressing again will quit the teletext mode.
No Picture: Is the aerial connected properly? Are the plugs
“RETURN” Index: Selects the teletext index page.
connected tightly to the aerial socket? Is the aerial cable
“INFO” Reveal: Shows hidden information (e.g. solutions of
damaged? Are suitable plugs used to connect the aerial? If you
games).
are in doubt, consult your dealer. No Picture means that your TV
“OK” Hold: Holds a text page when convenient. Press again to
is not receiving a transmission. Have you selected the correct
resume.
button on the remote control? Try once more. Also make sure
Subcode Pages: Selects subcode pages if
the correct input source has been selected.
available when the teletext is activated.
Sound: You can not heat any sound. Did you perhaps interrupt
P+/ P- and numbers (0-9): Press to select a page.
button? Sound is coming from only
Note: Most TV stations use code 100 for their index pages.
the sound, pressing the
Colord Buttens (RED/ GREEN/
one of the speakers. Is the balance set to one extreme? See
Sound Menu.
YELLOW/ BLUE)
Remote control: Your TV no longer responds to the remote
Your TV supports both FASTEXT and TOP text systems.
control. Perhaps the batteries are axhausted. If so you can still
When these systems are available, the pages are divided into
use the local buttons on the TV.
groups or topics. When FASTEXT system is available, sections
Input Sources: If you cannot select an input source, it is
in a teletext page will become color-coded and can be selected
possible that no device is connected. Check the AV cable and
by pressing the colored buttons. Press a colored button that
connections if you have tried to connect a device.
corresponds to with your needs. The colored writing will appear,
showing you which colored buttons to use when TOP text
transmission
26
Appendix A: PC Input Typical Display
Modes
The display has a maximum resolution of 1360 x 768. The
following table is an illustration of some of the typical video
display modes. Your TV may not support different resolutions.
Supported resolution modes are listed below. If you switch your
PC to an unsupported mode a warning OSD will appear on the
screen.
(X: Not Available, O: Available)
In some cases a signal on the LCD TV may
not be displayed properly. The problem may
be an inconsistency with standards from the
source equipment (DVD, Set-top box, etx.).
If you do experience such a problem please
contact your dealer and also the
manufacturer of the source equipment.
27
Appendix C: Supported DVI Resolutions
When connecting devices to your TV´s connectors by using DVI converter cables (not supplied),
you can refer to the following resolution information.
28
Appendix E: Software Upgrade
•
Your TV is capable of finding and updating new software upgrades over broadcast channels.
•
For broadcast channels search, TV looks the available channels stored in your settings. So
before software upgrade search, it is advised to auto search and update all available channels.
1) Software upgrades search via user interface
•
It is possible manually to check if there is a new software upgrade for your TV set.
•
Simply navigate on your main menu. Choose Settings and select Other Settings menu. In
Other Settings menu navigate on to the Software Upgrade item and press OK button to open
Upgrade Options menu.
•
In upgrade Options menu select Scan for upgrade and press OK button.
•
If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the
remaining download progress. When download completes with success a message is displayed for
reboot to activate new software. Press OK to continue with the reboot operation
2) 3.AM search and upgrade mode
•
If automatic scanning in Upgrade Options menu is enabled, TV wakes up at 03:00 and
searches broadcast channels for new software upgrade. If new software is found and
downloaded successfully, with next power up TV opens with new software version.
Note on reboot operation: Reboot is the last step in software upgrade operation if download of
new software is finished successfully. During reboot TV makes final initializations. In reboot
sequence panel power is closed and front led indicates the activity with blinking. Around 5
minutes later TV restarts with new software activated,
•
If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV
should open with new software safely. If you still can not get TV working, please kindly
repeat unplug and plug sequence a few times more. If your set still can not operate, please call
the service personnel to fix the problem for you.
Caution: While led is blinking during reboot do not unplug your TV´s power. Doing this
may cause your TV not to re-open again and can only be fixed by service personnel.
29
Specifications
TV BROADCASTING
PAL/ SECAM B/G D/K K´ I/I´ L/L´
RECEIVING CHANNELS
VHF (BAND l/lll)
UHF (BAND U)
HYPERBAND
NUMBER OF PRESET CHANNELS
1000
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
110-240V AC, 50/60 Hz.
AUDIO
German + Nicam Stereo
AUDIO OUTPUT POWET (W
2 x 2,5
) (10% THD)
RMS.
POWER CONSUMPTION (W)
20W (max)
<1 W (Standby)
PANEL
16” Screen Size
DIMENSION (mm)
DxLXH (With foot): 118 x 390 x 286
Weight (Kg): 2,40
DxLxH (Without foot): 49,9 x 390 x 256
Weight (Kg): 2,20
30
MOBIL TV INSTRUCTIONAL MANUAL
Switching the TV On Using 12 Volt
1.
Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to the battery of
car, making sure to observe the correct polarity.
2.
Plug the other side of 12 volt cable to DC 12 socket at the back of the TV. Then the standby LED lights up.
3.
Press the
button, P+/ P- or a numeric button on the remote control or press the
button, - or + button on
the TV. The TV will then switch on.
4.
Adjust for best picture through antenna position or set TV channels again if necessaty.
Switching the TV Off
1.
Press the
button on the remote control or press the
mode.
2.
Unplug cable connectors and power plugs-
31
switch on the TV, so the TV will switch to standby
Contents
Features................................................................................... 32
Features
General Properties................................................................32
Safety Information ...................................................................33
General Properties
Notes on Discs .........................................................................33
•
On handling discs..................................................................33
DVD/ CD/ CD-R/ CD-RW/ MP3/ JPEG/ MPEG/
DivX playback
On cleaning...........................................................................33
•
NTSC/ PAL playback (according to disc content)
How to Watch a DVD..............................................................33
•
LPCM audio via coaxial digital audio output.
DVD Control Panel Buttons ....................................................34
•
LPCM audio via coaxial digital audio output.
Licence Notification ................................................................33
Overview of the Remote Control .............................................34
(optional)
General Operation....................................................................35
•
General Playback .....................................................................36
Multi-Audio (up to 8) support (According to disc
content)
Basic Play ............................................................................36
•
For your reference:.............................................................36
Multi-Subtitle (up to 32) support (According to disc
content)
Notes on Playback: ...............................................................36
Setup Menu Items ....................................................................36
•
8 level parental control
Video Setup Page...................................................................36
•
Fast forward and rewind in 5 different speeds. (2x,
TV Type.............................................................................36
4x, 8x, 16x, 32x)
DivX VOD.........................................................................36
•
Language Setup .......................................................................36
OSD LANG ........................................................................36
Slow motion playback in 4 different speeds. (1/2x,
1/4x, 1/8x, 1/16x forward)
AUDIO ................................................................................36
•
Frame by frame forward playback
DISC MENU ......................................................................36
•
Search Mode
Preferences...............................................................................37
•
Repeat
DEFAULT ...........................................................................37
•
Coaxial audio output (optional)
DOWNMIX .........................................................................37
•
Copied disks may be incompatible.
SUBTITLE ..........................................................................36
PASSWORD (Change Password):.......................................37
Note
SPDIF OUTPUT..................................................................37
•
Troubleshooting.......................................................................37
This DVD player may not support some MP3
The picture quality is poor (DVD) .........................................37
recordings due to differences in recording formats or
Disc does not play..................................................................37
disc type.
•
Wrong OSD language ............................................................37
Some functions (Angle. Zoom etc.)do not work79
Please read the owner´s manual about MP3
playback.
No picture ..............................................................................38
•
No sound................................................................................38
CD-R/ CD-RW discs recorded by CD-DA method
Distorted sound......................................................................38
can be played. Some CD-R/ CD-RW discs may be
No response from remote control...........................................38
incompatible due to laser pick-up and discs may be
If nothing works.....................................................................38
incompatible due to laser pick-up and disc design.
Definition of Terms .................................................................38
•
Disc Types Compatible with This Unit....................................39
DVD-R/ RW discs recorded by DVD-Video method
can be played. Some DVD-R/RW discs may be
Supported File Formats............................................................40
incompatible due to laser pick-up and disc design.
Specifications...................................................................40
•
Some discs may be incompatible with JPEG Viewer
function due to different recording format or
condition of the discs.
32
Safety Information
CAUTION
On cleaning
DVD Player is a class 1 laser product. However this
•
product uses a visible beam which could cause hazardous
Before playing, clean the disc with a cleaning
cloth. Wipe the disc from center out.
radiation exposure. Be sure to operate the player correctly
as instructed.
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
•
intended to alert the user to the presence
Do not use solvents such as benzene, thinner,
commercially available cleaners or anti-static spray
of uninsulated “dangerous voltage”
intended for vinyl LPs.
within the product´s enclosure that may
Licence Notification
be of sufficient magnitude to constitute a
•
risk of electric shock of persons.
This product incorporates copyright protection
technology that is protected by U.S. patents and
The excalamation point within an
other intellectual property rights. Use of this
equilateral triangle is itended to alert the
copyright protection technology must be authorized
user to the presence of important
by Rovi Corlporation, and is intended for home and
operating and maintenance (servicing) instructions in the
other limited viewing uses only unless otherwise
literature accompanying the appliance.
outhorized by Rovi Corporation. Revese
engineering and disassembly are prohibited.
Notes on Discs
How to Watch a DVD
On handling discs
•
When placing a disc into the loader, labeled side of the
To keep the disc clean, handle the disc by its edge.
disc should be on the front:
Do not touch the surface.
•
Do not stick paper or tape on the disc.
•
If the disc is contaminated with any substance like
glue remove before using it.
•
When TV set is turned on, first switch to DVD source
Do not expose the disc to direct sunlight or heat
by using the SOURCE button on the remote control.
sources such as hot air ducts, or leave it in a cat
Press play on the remote control, or directly press play
parked in direct sunlight as the temperature can rise
button at the front panel. If there is no disc inside the
quickly and damage the disc.
•
loader, place a DVD first and press play.
After playing, store the disc in its case.
33
DVD Control Panel Buttons
A.
Disc loader
B.
Play/ Pause
Plays/ pauses the disc. When DVD menu (root menu) is active, this button function as “button
select” (selects the highlighted item in menu) if this is not prohibited by the disc.
C.Stop / Eject
Stop playing disc/ Eject or load the disc Note:
•
You cannot eject the disc via the remote control.
•
While playing a file, you should press STOP button three timer to eject.
Overview of the Remote Control
1.
Standby
2.
Numeric buttons
3.
Return back
4.
Language selection (Set language)
5.
Display time/ DVD menu
6.
Clear
7.
Stop
8.
No function
9.
Rapid Reverse
10. Rapid advance
11. Info
12. Zoom
13. Repeat
14. Root
15. Menu
16. Title
17. OK/ Select
18. Navigation Buttons
19. Subtitle
20. Angle
21. Search mode
22. Play
23. Pause
24. Skip next
25. Skip previous
34
General Operation
You can operate DVD, movie CD, music or picture CD´s content by using the proper buttons on your remote control. Below
are main functions of commonly used remote control buttons.
(*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit
key to switch one digit titles (example: to select 5, press 0 and 5.
35
11. Reverse stepping is not available.
General Playback
12. For your convenience:
Basic Play
If you attempt to enter a number greater than the total time of the
1.
Press on the power button
2.
Please insert a disc to the loader.
current title, the time search box disappears and
Input Invalid”
message appears on up-left corner of screen.
The disc will be automatically loaded and play commences if the
13. Slide Show is disabled when the ZOOM mode is on.
disc does not have any menus recorded on it.
Setup Menu Items
A menu may appear on the TV screen after a few moments or the
Video Setup Page
film may start immediately after the introduction of the Film
Company. This behaviour depends on the disc content and may
change.
Note: Step 3 and 4 is available only when a menu is recorded on the
disc.
3.
Press
or the number button (s) to select the
preferred title.
4.
Press SELECT.
Play of the selected items now starts. The played item may be a
TV Type
motion picture, a still picture or another submenu depending on the
TV Type is only available as “PAL”. The TV set also supports
disc.
NTSC signal: however, the signal will be converted to PAL when it
For your reference:
appears on the screen.
If an action corresponding to a button is prohibited the
DivX VOD
DivX VOD provides the convenience of streaming video in terms of
symbol appears.
quality and performance.
Notes on Playback:
Language Setup
1.
No sound will be heard during Rapid advance or Rapid reverse.
2.
No sound will be heard during Slow motion play.
3.
Reverse slow motion play is not available.
4.
In some cases, the subtitle language is not changed
immediately to the selected one.
5.
When the preferred language is not selected even after pressing
the button several times, it means that the language is not available
on the disc.
6.
When the player is restarted or the disc is changed, the subtitle
OSD LANG
selection is automatically changed back to the initial settings.
You can select the default OSD language of the player menus.
7.
AUDIO
If a language is selected, not supported by the disc, the subtitle
language will automatically be set to the disc´s priority language.
You can select the default audio language if supported by the DVD
8.
disc.
Usually a circulation will happen while switching to another
language, that is you can cancel the subtitle by pressing this button a
DISC MENU
number of times until “Subtitle Off” appears on the screen.
You can select the DVD´s disc menu language among these
9.
languages. Disc menu appears in the selected language, if supported
When the power is turned on or the disc is removed, the
language heard is the one selected at the initial settings. If this
by the DVD disc.
language is not recorded on the disc, only the available language on
SUBTITLE
the disc will be heard.
You can select the default subtitle language if supported by the
10. Some DVDs may not contain root and/ or title menus.
DVD disc.
36
SPDIF OUTPUT
Preferences
You can set Spdif Output as PCM or RAW. If you select PCM
DEFAULT
from SPDIF Output in DVD menu and play DVD with Dolby
If you choose RESET and press SELECT, the factory-presets are
audio, you can get audio autput with two channels via the
loaded. Parental level and parental password does not change.
speakers and the SPDIF Out. If you select RAW from SPDIF
DOWNMIX
Output in DVD menu and play DVD with Dolby audio, speakers
This mode can be selected when the digital audio output of the
will be muted and you can get 5+1 Dolby audio via the SPDIF
TV is used.
Out.
SURROUND: Surroung soung output.
STEREO: Two channels stereo.
Troubleshooting
PARENTAL (Parental Level)
The picture quality is poor (DVD)
•
Make sure the DVD disc surface is not damaged. (Scratch,
fingerprint etc.)
•
Clean the DVD disc and try again.
See instructions described in “Notes on Discs” to clean your disc
properly.
•
Ensure that the DVD disc is in the drawer with the label
uppermost.
•
A damp DVD disc or condensation may effect the
equipment. Wait for 1 to 2 hours in Stand-by to dry the
equipment.
Disc does not play
Playing some DVDs can be limited depending on the age of
•
users. The “Parental Control” function allows playback limitation
No disc in the machine.
Place a disc into the loader.
level to be set by the parent.
Parental Level can be adjusted to one of the eight levels. Level
•
“8ADULT” adjustment let you watch all off the DVD titles
Ensure that the DVD disc is in the drawer with the label
ignoring the DVD disc´s parental level. You can watch the DVD
uppermost.
discs, which has the same or lower parental level than the player´s
•
Disc incorrectly loaded.
Wrong type of disc. The machine cannot play CD-ROMS
etc.
level only.
PASSWORD (Change Password):
•
Using this item you can change the current password.
Wrong OSD language
To change the password you will be prompted to enter your old
•
Select the language in the set-up menu.
password. After you have entered your old password, you can
•
The language for the sound or subtitles on a DVD cannot be
The region code of the DVD must match the player.
changed.
now enter the ne 4-digit password.
•
You can use C key to delete the incorrect entry.
Note: Factory preset of the password is “0000”. You have the
Multilingual sound and/ or subtitles not recorded on the
DVD.
•
enter XXXX digital password every time you want to change the
Try to change the sound or subtitles using DVD´s title menu.
parental level. If you forget your password please contact
Some DVD´s do not allow the user to change these settings
technical service.
without using the disc´s menu.
37
Some functions (Angle, Zoom etc) do not work
signals. Incorporating a new video compression technology
•
These functions are not available on the DVD.
(MPEG ll) and high-density recording technology. DVD enables
•
Angle can only be changed when the angle symbol is
aesthetically pleasing full-motion video to be recorded over long
periods of time (for instance, a whole movie can be recorded).
displayed.
DVD has a structure consisting of two 0.6-mm thin discs, which
No picture
•
are adhered to each other. Since the thinner the disc, the higher
Have you pressed the correct buttons on the remote control?
the density at which the information can be recorded, a DVD disc
Try once more.
has a greater capacity than a single 1.2 mm thick disc. Since the
No sound
two thin discs are adhered to each other., there is the potential to
•
Check the volume is set to an audible level.
achieve double-sided play sometime in the future for even longer
•
Make sure you have not switched the sound off accidentally.
duration play.
Distorted sound
Subtitles
•
These are printed lines appearing at the bottom of the screen,
Check that the appropriate listening mode setting is correct.
which translate or transcribe the dialogue. They are recorded on
No response from remote control
the DVD discs.
•
Make sure the remote control is in the correct mode.
•
Check batteries are fitted correctly.
•
Change the batteries.
Time number
This indicates the playtime, which has elapsed from the start of a
disc or a title. It can be used to find a specific scene quickly. (Not
If nothing works
all discs permit the time search feature to be used. Availability is
If you have tries the above solutions and none seem to work, try
determined by the disc´s manufacturer.)
switching your TV-DVD off and on again. If this does not work,
Title Number
contact your supplier or TV-DVD repair technician. Never
These numbers are recorded on DVD discs. When a disc contains
attempt to repair a defective TV-DVD yourself.
two or more movies, these movies are numbered as title 1, title 2.,
Definition of Terms
etc.
Angle
Track Number
Recorded onto some DVD discs are scenes, which have been
These numbers are assigned to the tracks, which are recorded on
simultaneously shot from a number of different angles ( the same
AudioCDs. They enable specific tracks to be located quickly.
scene is shot from the front, from the left side, from the right side,
LPCM
etc.). With such discs, the ANGLE button can be used to view the
LPCM stands for Pulse Code Modulation and is digital audio.
scene from different angles.
MPEG
Chapter Number
Short for Moving Picture Experts Group. This is an international
These numbers are recorded on DVD discs. A title is subdivided
standard for compression of moving images. On some DVDs
into many sections, each of which are numbered, and specific
digital audio has been compressed and recorded in this format.
parts of video presentations can be searched quickly using these
DivX
numbers
DivX is a digital video compression technology based on MPEC-
DVD
4 and developed by DivX Networks Inc.
This refers to a high-density optical disc on which high-quality
pictures and sound have been recorded by means of digital
38
39
Note: It is not guaranteed that all DivX formats are supported.
40