Dickinson Large Sea-B-Que Installation guide

PAGE 1
APPLIANCES
321
Village Marine
322 - 323
US Watermaker
324
Refrigeration
Nova Kool
326 - 330
Stoves, Parts & Accessories
Stoves & Ranges
331 - 335
Stove Pipe / Parts
335 - 336
Dickinson
337
Magma Grills
339 - 344
Tanks & Tank Lockers
345
Hose & Fittings
346 - 347
Dehumidi ers
348 - 349
Heaters
349 - 353
Heater Craft Heaters
349 - 351
Seaward Water Heaters
354
Torrid Water Heaters
355
Watermakers
BBQ's
Propane Fittings
Heating
322
Watermakers
Village Marine The Squirt & Stowaway Watermakers
A full featured unit with all of the bene ts of larger de-salination systems at
a fraction of the size, weight and cost. The Squirt will produce 200-800 U.S.
gallons per day of pure drinking water from the sea. The unit is easy to install, is compact and full featured making it ideal for pleasure
boats and light commercial applications.
• Magnetic drive low pressure pump provides over 10 feet boost pressure to the ltration system
• Maintenance-free air/oil separator lengthens the life of the membranes and pump
• 316 S/S, glycerine lled low pressure gauge for accurate reading of the high pressure pump
• Close coupled high pressure pump and motor eliminates belts and pulleys
• Easy to operate 316 S/S high pressure bypass valve controls the operating mode from cleaning/rinse to R.O.
• Adjustable 316 S/S pressure regulating valve for use in fresh, brackish or sea water
• Automatic diversion valve diverts water to discharge if water quality drops below acceptable standards
• Digital water quality monitor displays PPM TDS (parts per million total dissolved solids) of product water output
• Computer controlled diagnostics & electronics package with LCD message centre and digital PPM read-out
• Full one year limited warranty
• The Squirt is also available in a modular format
• Remote control included
APPLIANCES
Unit price does not include
membranes or fresh water ush
Please Order Separately
The Squirt
Village Marine The Stowaway Watermaker
The Stowaway is similar to the Squirt but separates
its pre- lter and boost pump from the main unit to
provide a smaller, more compact footprint.
The Squirt Watermaker
VIL SPW-400-110V*
VIL SPW-400-220V*
VIL SPW-600-110V*
VIL SPW-600-220V*
• 26" L x 16" W x 15" H
400 US GPD
400 US GPD
600 US GPD
600 US GPD
VIL STW-400D-110V*
VIL STW-400D-220V*
VIL STW-600D-110V*
VIL STW-600D-220V*
VIL STW-800-220V*
• 22" L x 14" W x 11" H
The Stowaway
400 US GPD
400 US GPD
600 US GPD
600 US GPD
800 US GPD
Pure Water Series Watermaker
The Pure Water series reverse osmosis desalinators are designed for continuous duty operation and are manufactured to truly industrial
strength. Additional standard equipment: complete electronics package, heavy duty, low-rpm, 5-piston pumps, and oversized, dual stage,
hi- ow pre- ltration improve reliability and reduce maintenance intervals in rugged conditions. Available in a self-contained framed, semimodular and completely modular con gurations with capacities ranging from 200 to 2,000 GPD.
• The Pure Water series shares all of the same features as listed for the Squirt series, with a belt driven hp pump
• Full one year limited warranty
Pure Water Self-Contained
400 US GPD
400 US GPD
600 US GPD
600 US GPD
2000 US GPD
2000 US GPD
2000 US GPD
VIL PW-400-110V*
VIL PW-400-220V*
VIL PW-600-110V*
VIL PW-600-220V*
VIL PW-2000-220V*
VIL PW-2000-240V*
VIL PW-2000M-220V*
Pure Water Modular
VIL PW-1200M-220V*
1200 US GPD
Pure Water Semi-Modular
VIL PW-1200SM220V*
1200 US GPD
Pure Water Vertical
VIL PW-1200V-240V*
1200 US GPD
Unit price does not include
membranes or fresh water ush
Please Order Separately
Pure Water Self Contained
All watermakers are ordered as request items.
► NOTE: Please call for additional information, availability
and ordering.
Seaward Products
gas ranges & stoves
• 100% safety shutoff devices
• Porcelain oven interiors
• Thermostatically controlled
electric cook tops
• Ceran glass with grey graphics
• 1,200 watt radiant elements
• Limiters prevent overheating
Water Heaters
• Electric/engine heat exchanger
• 120/240 volt-1500 watt element
• Ignition protected
coMposite lpg cylinders
• 30% lighter than steel
• Corrosion free
• Protective outer casing
Manufacturing Quality coMpact appliances for over 30 years
www.seawardproducts.com
323
Watermakers
Village Marine Little Wonder Watermakers
These units come equipped with a unique titanium high-pressure pump head, breglass pressure vessel (s)
and 316 stainless steel ttings. The Little Wonder is available in three styles: Modular, Semi-modular and
Vertical frame. The framed unit is the most convenient to install: simply connect the hoses, run the power
and you're in business. The modular system is ideal for sail boat applications by allowing the user the
freedom to install components where space permits. The LW system includes pre- lter, cleaning system,
cleaning chemicals, spare lter, boost pump, product water sample valve and manual freshwater ush..
• Titanium pump impervious to the corrosive sea water
environment and designed for maximum ef ciency
• Adjustable 316 S/S pressure regulating valve provides constant
pressure which no other unit in the market provides
• All 316 S/S high pressure piping for superior duty life
• 316 S/S glycerine lled high pressure gauge to assure accurate
reading of pressure from high pressure pump
• Product ow meter to monitor gallons per hour of product
Little Wonder Modular
water being produced
• The only 12 volt reverse osmosis unit that works in cold or
tropical sea water and brackish lake water
• Full one year limited warranty
Unit price does not include membranes
VIL LWM-145-12V*
145 US GPD
VIL LWM-200-12V*
200 US GPD
• LWM modular unit: 45" L x 8" W x 10" H, 48 lbs
Framed Units (Semi-Modular)
VIL LW-145-12V*
145 US GPD
VIL LW-200-12V*
200 US GPD
• LW Framed unit: 26.5" L x 11" W x 9.25" H, 63 lbs
Vertical Units
VIL LWV-145-12V*
145 US GPD
VIL LWV-200-12V*
200 US GPD
• LW Framed unit: 13" L x 13" W x 25" H, 70 lbs
** All units are available in 24 volts
Village Marine Hand Held Digital Tester
Battery operated, pocket sized instrument used
to measure PPM (parts per million) of TDS
(total dissolved solids) in your product water and
to evaluate your reverse osmosis membrane's
performance. Reads up to 1000 PPM TDS. Use with
PW, LW & Squirt units.
VIL 99-1990
Please call for more information on these
► NOTE: products or have us quote you on models for
land, sh camps, resorts & small communities.
Please Order Separately
Little Wonder Semi-Modular
Parts:
Part #
Description
Watermaker
VIL 20-2002
.125-Amp fuse
STW/SPW/PW
VIL 20-2022
2-Amp fuse
STW/SPW/PW
VIL 20-2042
4-Amp fuse
STW/SPW/PW
VIL 30-0405
"O-ring" for lter tank
PW
VIL 33-0005
5 mic. 30 S.F. lter cartridge
PW
VIL 33-0020
20 mic. 30 S.F. lter cartridge
PW
VIL 33-0052
5 mic 15 S.F. lter cartridge
VIL 33-0053
20 mic 15 S.F. lter cartridge
VIL 33-0117
5-MIC 10 S.F. Filter
STW/SPW/LW
VIL 33-0118
20-MIC 10 S.F. Filter
STW/SPW/LW
VIL 33-0311
Carbon Fresh H2O ush cartridge
SPW/STW/LW
VIL 33-0315
Charcoal Filter 15 S.F.
VIL 33-1034
Filter housing
VIL 35-0034
Plankton screen & lter housing
LW/STW/SPW
VIL 35-0030
Plankton lter
LW/STW/SPW
VIL 85-0036
600 gram #1 cleaner
PW
VIL 85-0037
600 gram #2 de-scaler
PW
VIL 85-0038
600 gram #3 preservative
PW
VIL 85-0042
#1 Cleaner 5 lb
PW
VIL 85-0043
#2 Cleaner 5 lb
PW
VIL 85-0044
#3 Chemical 5 lb
PW
SPW/STW/LW
VIL 85-0102
Cleaning lter Kit (#1 & #2)
STW/LW/SPW
VIL 85-0103
Preservation lter Kit (2 lters)
STW/LW/SPW
VIL 85-0050
High pressure pump oil Qt.
LW/SPW/PW/STW
VIL 90-0215
Manual fresh water ush
LW/SPW/STW
VIL 90-0135
PH Strip test kit
all
VIL 90-1783
Auto- ush
SPW/MPW
*Kits includes: cleaning chemical kit, drive belt, 16 oz. of pump oil,
seal kit, valve kit, two 5 micron lter cartridges.
APPLIANCES
Modular Units
Little Wonder Vertical
324
Watermakers
US Watermaker
Clearwater Super Compact Series
The Clearwater Super Compact series is a frame mounted unit
with manual start/stop and automatic freshwater ush. These are
available in 400, 600, 800 1200 & 1500 GPD sizes.
Standard equipment includes:
• CAT PUMPS hp pump w/316SS pump head (pump head
lifetime guarantee)
• Fibreglass pressure vessel (s) guaranteed for life
• Spiral wound membranes with three-year pro-rated warranty
• Complete digital electronic monitoring
• Remote control
• Automatic fresh water ush system
• Magnetic drive boost pump
• Pre- ltration
APPLIANCES
USW CW-400*
400 US GPD
USW CW-600*
600 US GPD
USW CW-800-2*
800 US GPD (2 x 40") + pressure vessels
USW CW-800-4*
800 US GPD (4 x 20") + pressure vessels
USW CW-1200*
1200 US GPD
USW CW-1500*
1500 US GPD
*Request Items
Available voltage: 115/230VAC
Frame size: 24” Wide x 14” Deep x 12” High
USWATERMAKER utilizes a 316SS pressure
regulating valve, powder coated aluminum
frames, all stainless steel ttings, and glycerin
lled pressure gauges. The Clearwater Series
offers exibility in installation as well.
US Watermaker
Island Explorer Series
The Island Explorer is an economical modular unit available in 500
or 900 GPD sizes. Designed for hard to t locations on powerboats
and sailing vessels.
Standard equipment includes:
• CAT PUMPS hp pump w/316SS pump head (pump head
lifetime guarantee)
• Fibreglass pressure vessel (s) guaranteed for life
• Spiral wound membranes with three-year prorated warranty
• Hand held digital tester
• Manual fresh water ush system
• Magnetic drive boost pump
• Pre- ltration
USW IE-500*
500 US GPD
USW IE-900*
900 US GPD
*Request Items
Available voltage: 115/230VAC
Parts:
USW 10211*
USW 10212*
USW 10725*
USW 10245*
USW 10229*
USW 10230*
*Request Items
2.5" x 10", 5 micron lter
2.5" x 10", 20 micron lter
2.5" x 10", carbon lter
2.5" x 10", plankton lter pleated
Filter wrench - standard housing
2.5" x 10" clear, lter housing
Speci cations
Production capacity: ..................400 to 1200 US gallons per day
Raw water ow: .........................3 gallons per minute
Waste water ow: ......................2.4 Gallons per minute
Motor: ........................................ Baldor 2 horsepower - 56C close coupled
Kw (max): .................................. 2.1 Kilowatts
Amps (max): .............................. 18.4 / 9.2
Volts:.......................................... 115 / 230
Phase: ....................................... Single
Service factor:............................ 1.15
High pressure pump: ................. General pump 316 stainless model WM
High pressure control: ............... Adjustable pressure regulator (1000 psi limit)
Pressure vessels: ...................... Composite 3,000 psi burst
Membranes:............................... Koch SW2540 high ow
Operating pressure:................... 825 psi
Pre lters: ................................... 2.5 X 10; cartridge type - disposable
Feed pump: ............................... 1/4 horse power magnetic drive 110 / 240 volt
Feed pressure: .......................... 5 psi
Raw water connection: .............. 3/4" hose barb
Waste water connection: ...........1/2" hose barb
Product water connection:.........1/2" hose barb
•
NOVA KOOL has manufactured quality marine
refrigeration products for over 20 years.




www.novakool.com
326
Refrigeration
Top of the line, Canadian made refrigerators that are powered by 12V DC (12V DC/115V AC
optional). They utilize a German built Danfoss compressor that is constructed with a traditional
crankshaft, connecting rod, and piston driven by a brushless DC electric motor. The compressor
automatically shuts down in low voltage conditions (below 10.5 volts) and kicks back in at 11.5
volts. If using an AC/DC unit, it automatically switches to AC, when AC power is available. The interior lining is made of impact resistant
polystyrene plastic with solid ll urethane insulation. Designed for marine use, they can operate at a constant angle of up to 30 degrees.
The quiet DC compressor will not interfere with other equipment, when operated solely on 12 volts.
*Contact us for direct crossover information if you are replacing a fridge or freezer*
Nova Kool Single Door Refrigerators
These units have a large interior volume with a small cut out dimension. Large reversible doors, with magnetic gaskets for a positive seal.
All stainless steel hinges. Construction is rugged 18 gauge epoxy coated satin coat steel frame with a galvanized steel outer cabinet shell.
Thermostat controlled for a wide range of settings. The removable door panel can be replaced to match differing interiors. Standard
freezer compartments with doors and ice tray, except the R2600. Amp draw is 2.2 amp 12VDC.
Volume
(cu.ft.)
Cut-Out
(H x W x D)
Flange
Panel max.
Weight
12/24 VDC
12/24 & 100/240 50/60 Hz
1.9
20-5/8” x 15-5/8” x 17-3/4”
21-3/8” x 16-3/8”
19-3/4" x 15-1/8”
40 lbs
12/24 VDC
2.1
28-3/8” x 16-3/4” x 14”
29-1/4” x 17-3/4”
27-7/8" x 16-9/16"
45 lbs
NOV R2600DC
NOV R2600ACDC
12/24 VDC
12/24 & 100/240 50/60 Hz
2.4
20-1/4" x 18" x 19-1/2"
21" x 18-3/4”
20-3/16” x 17-5/16”
39 lbs
NOV R-3800DC
NOV R3800ACDC
12/24 VDC
12/24 & 100/240 50/60 Hz
3.5
28-3/8” x 20-1/4” x 18”
29-1/4” x 21”
27-7/8” x 19-5/8”
54 lbs
NOV R4500DC
NOV R4500ACDC
12/24 VDC
12/24 & 100/240 50/60 Hz
4.3
28-3/8” x 20-1/4” x 21”
29-1/4” x 21”
27-7/8” x 19-5/8”
59 lbs
NOV R5810DC
NOV R5810ACDC
12/24 VDC
12/24 & 100/240 50/60 Hz
5.8
31-3/4" x 23-1/8" x 23-3/4"
33-1/8" x 24-1/2"
29-5/8" x 21-3/8"
69 lbs
Part #
NOV R1900DC
NOV R1900ACDC
APPLIANCES
NOV R-2300DC
Volts
R1900
R2600
R2300
R3800/R4500
R5810
Refrigeration
327
Nova Kool Two Door Refrigerators
The two door unit refrigerators draw 4.3 amps on 12VDC when running with the exception of the RFU8220/9000 series which draw 5.5
amps when running. Key features are positive latch system, reversible door swing, stainless steel fasteners and hinge hardware, rugged
steel cabinets and mounting anges.
Part #
Volts
Interior/Freezer
(cu.ft.)
Cut-Out
(H x W x D)
Flange
Panel 1
Panel 2
Weight
Under Counter Refrigerators
NOV RFS7501DC
NOV RFS7501ACDC
*
**
7.5 / 2.0
34” x 28” x 23”
35” x 29”
33-3/4” x 17-7/8”
33-3/4” x 9-5/16”
90 lbs
Upright Refrigerators
NOV RFU6200DC
*
NOV RFU6800DC
6 / 2.5
47-3/4” x 20-1/4” x 20-1/2”
48-3/4” x 21”
27-7/8” x 19-5/8”
17-5/16” x 20-3/16”
93 lbs
6.8 / 2.5
47-3/4” x 20-1/4” x 21-1/2”
48-3/4” x 21”
28” x 19-5/8”
17-5/16” x 20-3/16”
95 lbs
6.8 / 2.5
51-7/8” x 23-1/4” x 23-1/2”
53-13/16” x 24-1/2”
27-7/8” x 19-5/8”
17-1/4” x 19-5/8”
100 lbs
**
NOV RFU8220DC
NOV RFU8220ACDC
*
**
7.3 / 1.6
52-7/8” x 23-1/4” x 19-1/2”
53-1/4” x 24-3/4”
13-3/8" x 21-3/8"
29-5/8" x 21-3/8"
110 lbs
NOV RFU9000DC
NOV RFU9000ACDC
*
**
9.1 / 2.6
52-7/8” x 23-1/4” x 22-3/4”
53-1/4” x 24-3/4”
13-3/8" x 21-3/8"
29-5/8" x 21-3/8"
110 lbs
*12/24 VDC
** 12/24 & 100/240 50/60 Hz
RFS7501
RFU8000
RFU6200 / 6800
Replacing an Older Fridge or Freezer:
If you are replacing an older fridge or freezer, please refer to the
Crossover Chart on page 330
RFU8220/9000
APPLIANCES
NOV RFU8000DC
NOV RFU8000ACDC
328
Refrigeration / Icemakers
Nova Kool Top Load Refrigerator/Freezers
•
•
•
•
•
•
•
•
•
Replaceable door panels for a custom nish to your interior
Environmentally sound 134a refrigerant
CFC free urethane foam in cabinet and doors
Magnetic door gaskets for positive seal
Stainless fasteners & hinges used throughout
Maintenance friendly & ef cient static condenser
Low battery protection to help prevent full discharge of batteries
Low amperage fan
AC/DC: 12 & 24 VDC and 100-240 VAC 50/60HZ
Part #
Volts
NOV TL2500DC
NOV TL2500ACDC
*
**
Volume
(cu.ft.)
Cut-Out (H x W x D)
Flange
Panel max.
Weight
2.5
20-1/4" x 18" x 27”
21" x 18-3/4”
20-3/16” x 17-5/16”
55 lbs
*12/24 VDC
** 12/24 & 100/240 50/60 Hz
APPLIANCES
Nova Kool Freezers
Single door freezers draw 4.3 amps on 12VDC when running. Key features are
positive latch system, reversible door swing, stainless steel fasteners and hinge
hardware, rugged steel cabinets and mounting anges.
Part #
NOV F2600 DC
Volts
Volume
(cu.ft.)
Cut-Out
(H x W x D)
Flange
Panel max.
Weight
12/24 VDC
2.4
20-1/4” x 18” x 19-1/2”
21” x 18-3/4”
20-3/16” x 17-5/16”
43 lbs
U-Line
Ice Maker
Nova Kool
Compressor Cooler / Freezers
• 12/24 VDC/ optional 110 VAC
• Hermetic domus compressor w/low
voltage protection
• Temperature range: -18 to +10°C
• Removable carry handles
• Simple, secure lid lock
• Low voltage protection
• LED temperature display
• Low power consumption
• Auto reverse polarity protection
• Standard height for 2L bottles
• Quiet operation
Volume
HxDxW
Input
Weight
NOV BCD30
Part #
30 Litre
25.75" x 15.75" x 15"
35 W
40 lbs
NOV BCD45
45 Litre
25.75" x 15.75" x 17"
48 W
53 lbs
NOV BCD60
60 Litre
25.75" x 15.75" x 20.5"
55 W
55 lbs
Parts:
NOV BCD30CVR
NOV BCD45CVR
NOV BCD60CVR
NOV ACDC/ADPT
Insulated cover for BCD30
Insulated cover for BCD45
Insulated cover for BCD60
AC/DC adapter kit
Conserves water
and energy, making
over 23 lbs. of ice
cubes daily from
less than 3 gallons of
water and uses less
electricity than an
ordinary 75-watt light
bulb. Requires no drain, only a water line
connection. Can be installed free standing or built into your galley.
Stores 12 lbs. of ice and has an adjustable temperature control.
Door is eld reversible, accepts custom door panels and comes with
a locking pin.
ULI BI-95BTP
65 lbs, 110V
Lev-O-Gage Fridge Thermometer
Refrigerator/freezer thermometer mounts on inside
wall of refrigerator or stands up on solid shelf. Easy
to install with special adhesive tape. Tough acrylic
case. 2" High.
LEV 505
329
Refrigeration
Nova Kool Refrigeration Systems
The simple, reliable and ef cient means to convert an icebox into a refrigerator or even a freezer. It's a system engineered of
components designed speci cally for marine application. Three parts make up the system, a compressor assembly, a freezer unit, and
a thermostat. The 12 volt compressor draws a very low amperage. The average draw is only 1.5 to 2.5 amps per hour in an adequately
insulated box. The freezer unit is exactly like the freezer compartment in your household fridge, except smaller. The unit cools
the entire box as well as provides a freezer. Anywhere from a 1 - 8 cubic foot icebox can be accommodated, equipping it to be a
refrigerator, a full freezer or a combination refrigerator/freezer.
LT201-FL
Nova Kool Flex Line
LT201-F
LT201-RT6
LT201
Width ............... 2" - 18" spread width
Length.............. 16"
Depth ............... 11-3/8"
• Cooling capacity as freezer: 2-4cu.ft.
• Cooling capacity as fridge: 4-8cu.ft.
• Mounting: any position
NOV LT201-F
NOV LT-201-F1
NOV LT201-FL
Width ............... 6-3/4"
Length.............. 14-1/2"
Depth ............... 12"
• Cooling Capacity: 4-8 cu. ft.
• Insulation required: 3-4 inches
NOV LT201-RT6
LT 201 Speci cations
•
•
•
•
•
12-24 VDC
Variable speed compressor
Low battery protection
Compressor runs on a 30° angle
Over sized air cooled condenser for easy
installation in all high ambient temperatures
Freezer box & compressor
NOV LT-201-RT6-FLEX
Flex Line package
• Includes assembled freezer box, compressor & Flex line
Nova Kool Miscellaneous Items
NOV PS-110VAC
NOV LATCH75
NOV LIGHT24
NOV PANEL 26B
NOV PANEL 38B
NOV PANEL 38W
NOV THERMOSTAT
NOV THUMBLATCH L
NOV THUMBLATCH R
NOV FAN
NOV ICE TRAY-LRG
Power supply 110V
Molded plastic latch
24V light bulb
Black panel 17.375" x 20"
Black panel 19.75" x 28"
White panel 19.75" x 28"
Thermostat plus
S/S kit - left
S/S kit - right
12V fan
Ice tray
LT-201-RT6-FLEX
Flex Line systems come completely assembled,.
charged and ready for installation
Three plates & compressor
Single plate freezer unit
Single plate & compressor
NOV LT-201-F-FLEX
3 Plate freezer unit w/ exline
NOV LT-201-FL/FLEX
1 Plate freezer unit w/ exline
• Includes assembled three plates, compressor & Flex line
APPLIANCES
• Flex line evaporators are designed
to t our Ef cient LT201 and
LT210 Cooling Units
• Designed to stay exible during
installation, even if you don’t get it
right the rst try
• Can be coiled and uncoiled over
200 times
• Designed for mobile applications
including; marine, RV and trucking
• Flex line has been used in mobile
commercial refrigeration for over
10 years
• Uses reusable quick couplings
• Available on all Nova Kool
evaporators and can be uncoiled
from 2’ to 12’
Nova Kool Flange Kits
Flange kit for the R3800 and R4500
provides a way of converting these units
to t directly into the existing cabinets of
an older cut out of 32-7/8" H x 22" W
without expensive and time consuming
modi cations.
NOV FRAMEKIT-704
20 x 15 x 18
20 1/4 x 17 3/4 x 20 3/8
20 1/2 x 15 1/4 x 17 3/4
30 7/8 x 23 1/4 x 23 1/2
1.7
1.9
1.7
1.7
3.6
2.7
DC230
DC254
DC340
DE0040
DE0041
DE0051
20 1/4 x 17 3/4 x 20 3/8
20 1/2 x 18 1/2 x 21
30 7/8 x 20 1/2 x 20 1/8
30 3/8 x 20 1/2 x 20 3/4
20 1/2 x 15 1/4 x 17 3/4
30 7/8 x 23 1/4 x 23 1/2
20 1/2 x 18 1/2 x 21
52 7/8 x 23 1/4 x 23 3/4
30 7/8 x 20 1/2 x 20 1/8
30 7/8 x 23 1/8 x 23 1/4
30 7/8 x 23 7/8 x 23 1/4
30 7/8 x 23 1/4 x 23 1/2
52 1/2 x 23 1/8 x 23 1/4
52 7/8 x 23 1/4 x 23 3/4
32 7/8 x 22 x 21 7/8
51 7/8 x 23 15/16 x 23
51 7/8 x 23 15/16 x 23
1.9
2.8
2.8
1.6
3.1
1.9
6.3
2.8
3.1
3.1
6.3
6.3
3.2
6.2
6.2
DE251
DE351
DE390
DE400
DE440
DE441
DE451
DE461
DE490
DE540
DE541 or
DE541
DE560
DE561
RFU9000
RFU9000
R4500 &
FRAME704
RFU9000
RFU9000
R5810
R5810
R4500
RFU9000
R2600
R5810
R1900
R4500
R4500
R2600
R2600
RFU9000
R2600
R5810
R1900
R1900
R2600
R1900
R2600
MODEL#
9.1
9.1
4.3
9.1
9.1
5.8
5.8
4.3
9.1
2.4
5.8
1.9
4.3
4.3
2.4
52 7/8 x 23 1/4 x 22 3/4
52 7/8 x 23 1/4 x 22 3/4
28 3/8 x 20 1/4 x 21
52 7/8 x 23 1/4 x 22 3/4
52 7/8 x 23 1/4 x 22 3/4
31 5/8 x 23 1/8 x 23 3/4
31 5/8 x 23 1/8 x 23 3/4
28 3/8 x 20 1/4 x 21
52 7/8 x 23 1/4 x 22 3/4
20 1/4 x 18 x 19 1/2
31 5/8 x 23 1/8 x 23 3/4
20 1/2 x 15 5/8 x 17 3/4
28 3/8 x 20 1/4 x 21
28 3/8 x 20 1/4 x 21
20 1/4 x 18 x 19 1/2
20 1/4 x 18 x 19 1/2
52 7/8 x 23 1/4 x 22 3/4
9.1
2.4
20 1/4 x 18 x 19 1/2
2.4
20 1/2 x 15 5/8 x 17 3/4
1.9
31 5/8 x 23 1/8 x 23 3/4
20 1/2 x 15 5/8 x 17 3/4
5.8
20 1/4 x 18 x 19 1/2
1.9
20 1/2 x 15 5/8 x 17 3/4
1.9
2.4
20 1/4 x 18 x 19 1/2
HxWxD
2.4
VOL
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
RFU8220
RFU8320
RFU8220
RFU8320
R5810
RFU8220
RFU8220
R4500
R4500
R3800
RFU8220
R4500
R1600
R3800
R3800
RFU8220
R4500
R1600
R1600
R1600
MODEL#
RFU8220 and RFU9000 both have easily removed mounting anges that reduce depth by 3/4” to get thru tight spots
RFU8220 is ideal for applications where clearance thru do0rways etc is limited to get unit into boat
RFU8000 is ideal for applications where cut out height cannot be increased to 52 7/8” from original 51 7/8 (DE828/728)
Frame704 when used in conjunction with R4500 or R3800 to replace the DE704
DE828
DE728
DE704
52 7/8 x 23 1/4 x 24 3/4
7
1.9
DE0061
20 1/2 x 18 1/2 x 21
20 1/2 x 15 1/4 x 17 3/4
20 1/2 x 18 1/2 x 21
2.7
DC0051
HxWxD
VOL
MODEL#
NOVA KOOL
APPLIANCES
NORCOLD
7.3
7.3
7.3
7.3
5.8
7.3
7.3
4.3
4.3
3.5
7.3
4.3
1.3
3.5
3.5
7.3
4.3
1.3
1.3
1.3
VOL
52 7/8 x 23 1/4 x 19 1/2
45 1/2 x 23 1/4 x 21 3/4
52 7/8 x 23 1/4 x 19 1/2
45 1/2 x 23 1/4 x 21 3/4
31 5/8 x 23 1/8 x 23 3/4
52 7/8 x 23 1/4 x 19 1/2
52 7/8 x 23 1/4 x 19 1/2
28 3/8 x 20 1/4 x 21
28 3/8 x 20 1/4 x 21
28 3/8 x 20 1/4 x 18
52 7/8 x 23 1/4 x 19 1/2
28 3/8 x 20 1/4 x 21
20 1/2 x 15 5/8 x 13 3/4
28 3/8 x 20 1/4 x 18
28 3/8 x 20 1/4 x 18
52 7/8 x 23 1/4 x 19 1/2
28 3/8 x 20 1/4 x 21
20 1/2 x 15 5/8 x 13 3/4
20 1/2 x 15 5/8 x 13 3/4
20 1/2 x 15 5/8 x13 3/4
HxWxD
330
Refrigeration
Size Crossover Chart
Stoves
Seaward
Portable Butane Stove
An extremely safe and well constructed
portable stove. Constructed from stainless
steel and tted with a heavy duty regulator
and burner. Automatic piezo ignition and handy carrying case are
also included. Rated for indoor use this portable butane gas cooker
comes with the following safety features:
1) Flame failure device- switches off gas after 6 seconds if the
ame is extinguished.
2) Pressure sensitive safety device- ejects the gas cartridge at
unsafe pressure levels
3) In line safety cut out- cuts gas ow if over pressurized.
4) Prevention of accidental ignition- two step ignition
procedure
• Weight; 2.2kg.
• W: 13-1/2" x L: 11" x H: 3-1/2"
SWD BS100
A fully gimbaled marine stove which includes a low pro le
mounting bracket which allows the entire stove to be easily
detached and stowed when not in use. It features an all stainless
steel gimbaled “basket” with springs that secure the cooking pot.
The burner can be turned off and on instantly with no preheating
or priming necessary. A disposable propane cartridge gives up to 8
hours of hot, clean heat. A simple valve permits any ame intensity.
Designed to accept U.S. department of transportation approved
self-sealing propane bottles.
• 5000 BTU
• Dia: 8”, H: 7” (without fuel canister)
• Weight: 1.5 lbs
FRS 150000
Parts:
FRS 150007
Portable cooker
220 gram butane cartridge 4/pkg
Seaward
Built-In Butane Stove
A great replacement for alcohol stoves.
Compact design with a stainless steel lid
over a black enamel base. 100% safety
controls with high heat safety shut-off. Uses
replaceable butane gas cartridges.
• Overall size: 17-1/2" W x 12-1/2" D x
4-1/2" H
• Cut-out: 16-3/4" W x 11-3/4" D x 4-1/2" H
SWD 1203-1006
Dickinson
2-Burner Drop-In Propane Stove
Heavy duty stainless steel construction with
a 11,000 and 7,000 BTU burners. Comes
with CGA/AGA Safety gas valve and safe
push and turn electronic ignition. This unit is easily installed with
under counter brackets and is a shallow 4.75 inches in height. Unit
comes with pot holders, cutting board and will t standard cut outs.
• H: 4.75" x D: 12.5" x W: 21.5"
DIC 00-2BP
Forespar Marine Hot Spot Mini Galley
Mounting bracket only
Kit Includes:
•
•
•
•
2 Way gimbaled S/S burner with basket
Aluminum all purpose cooking/coffee pot
Plastic base
Mounting brackets
APPLIANCES
Parts:
SWD BU-6(BU5)
331
332
Propane Stoves / Ranges
Seaward Drop-In Propane Stoves
Low pro le counter top single and two burner stoves from Seaward. Designed for maximum cook top area in
minimal galley space. 100% safety controls - automatic shut-off thermal couple valves shut off fuel in case
ame blows out. Burners controlled by in nite adjustable valves. Automatic ignition. Porcelain enamel burner
grates and caps and black tempered glass tops.
Part #
APPLIANCES
Burners
Overall W x D x H
Cut-Out W x D x H
SWD 1273-1000
1 x 7,000 BTU
10" x 12" x 2-3/4"
9" x 11-1/8 x 2-3/4"
SWD 2276-1000
2 x 7,000 BTU
21" x 12" x 2-7/8"
20-3/8" x 11-3/8" x 2-7/8"
SWD 3276-1000
3 x 7,000 BTU
21-1/2" x 18-5/8" x 3"
20-1/4" x 17-1/2" x 3"
SWD G3278-1001
2 x 7,000 BTU
1 x 10,000 BTU
21-1/2" x 18-5/8" x 3"
20-1/4" x 17-1/2" x 3"
Seaward Drop-In Propane Stove
•
•
•
•
Stainless steel construction
Thermocouple protected burners with piezo ignition
Safety clips stop rattles even in the roughest sea conditions
Sea rail is standard
Part #
SWD 2272-1001
Accessories:
SWD 8330
Burners
Overall W x D x H
Cut-Out W x D x H
2 x 5,200 BTU
22-3/8" x 14-5/8" x 6-1/4"
22-7/16" x 13-3/4" x 6-3/8"
Wooden cutting board
Seaward Propane Ranges
The Princess models are constructed with a combination of stainless steel or ceramic
tops and doors. These stoves feature thermocouple protected burners, piezo ignition and
a thermostatically controlled full size oven. The oven is double coated with porcelain
enamel and has an adjustable oven rack. The one piece stove top grate (except the 33751002) and sealed burners make cleaning easy. Standard sea rail included.
Part #
Burners
Range
Top - Door
Holders
Overall W x D x H
Cut-Out W x D x H
SWD 2174-2001
2
Gimbaled
Stainless
0
21-3/8" x 17" x 22-1/16"
21-1/2" x 22-1/16 x N/A
SWD 2374-2002
2
Built-in
Stainless
1
21-3/4" x 15-1/4" x 22-1/16"
20-7/16" x 14-11/16" x 21-3/8"
SWD 3174-1000
3
Gimbaled
Black glass
1
21-3/8" x 21" x 22-1/16"
21-1/2" x 22-1/16" x N/A
SWD 3174-1002
3
Gimbaled
S/S - Black glass
1
21-3/8" x 21" x 22-1/16"
21-1/2" x 22-1/16" x N/A
SWD 3375-1002
3
Built-in
S/S - Black glass
0
21-3/4" x 19-7/16" x 22-1/16"
20-7/16" x 18-7/8" x 21-3/8"
SWD 3374-1000
3
Built-in
Black glass
1
21-3/4" x 19-7/16" x 22-1/16"
20-7/16" x 18-7/8" x 21-3/8"
SWD 3374-1002
3
Built-in
S/S - Black glass
1
21-3/4" x 19-7/16" x 22-1/16"
20-7/16" x 18-7/8" x 21-3/8"
Electric & Diesel Stoves / Ranges
Seaward
Electric Range
All new styling and all stainless steel
construction. Built for marine use, UL
marine approved. Extra large oven/broiler
with gleaming black door. Oven interior
is concealed until light is turned on. Two
high and one low speed surface burners.
In nite controls permit selection of exact
cooking temperatures. Standard sea rail.
Lift-up stainless steel lid provides extra shelf space and back splash
protection. Attractive butcher block cutting board. Automatic safety
switch cuts off current to burners when lid is in down position
while oven will continue to operate. Weight: approximately 90 lbs.
Wired for 120 volt service. Maximum operating load is 3.0 kW.
Selector switch prevents over loading of 20 amp circuit.
• Overall: 19-7/16" D x 22-1/16" H x 21-3/4" W
• Cutout: 18-7/8" D x 21-3/8" H x 20-7/16" W
Seaward Accessories
Rail Kits
Sea rail kits for drop in stoves, single
or two burner con guration available.
Complete kit includes stainless rail, pot
holders and mounting hardware.
SWD 93223
SWD 93224
2 burner kit
1 burner kit
Burner Grates
Replacement grates for non euro stoves.
SWD 70114
Cutting Boards
SWD 72146 For 24 series
SWD 8330 For 2272-1001
Seaward
Electric Cook Tops
• Bevelled edge
• Princess three burner Ceran glass
top electric stove
• Drop-in, frameless, ush mount
Ceran glass with black graphics
• 120V, three 1,200 watt radiant
elements
• Limiters in burners prevent overheating
• UL 858 or CE Certi ed
Dimensions
• Overall: 22" W x 20" D x 2-7/8" H
• Cutout: 21-3/8" W x 19-3/8" D x 2-7/8" H
SWD 3247-5100
Seaward
Two Burner Electric Stove
Dickinson stoves and heaters are manufactured with care by
experienced staff to a high standard of workmanship. Rugged
stainless steel construction, that's built to last. There are a variety
of diesel and solid fuel models to satisfy all of your cooking and
heating requirements.
Dickinson Beaufort
This stove is installed in many larger classic
yachts and work boats. Features a cast-iron
cooking surface of 24” x 36”. Dry heating,
hot water capability, large oven and a builtin utensil storage compartment make this
stove ideal for year round cruising.
Oven Size
Overall
W: 20" x D: 20" x H: 14"
W: 36" x D: 28.5" x H: 35.5"
Flue Size
5"
Drop-in, ush mount Ceran glass. Two 1000 W radiant elements at
120 V. Limiters in burners to prevent overheating. UL 858 or CE
Certi ed.
• Overall size:
22W x 13D x 2-7/8"
• Cut-out:
21-3/8 x 12-3/8D x 2-7/8"
Material
Stainless steel/cast-iron cooking top
Fuel
Diesel #2, #1 or Kerosene
Heat Output
Low 7750 BTU, High 32000 BTU
Burner
7" stainless steel 'Air ow'
SWD 2247-5100
Operation
Natural draft
Seaward
Electric Gourmet Cook Top
High tech electric stove top is a drop-in, ush mount unit with a
Ceran glass top and graphics. Elements are 1,200 watts each and
have built in limiters to prevent overheating. 120V.
• Overall:
22" W x 13" D x 2-7/8" H
• Cutout:
21-3/8" W x 12-3/8" D x 2-7/8" H
SWD G2247-5100
Draft Assist Fan
Standard
Hot Water Coil
Optional (1 or 2 turn)
Weight
360 lbs / 163.44 kg
DIC 00-BEA*
DIC 00-BEA1*
DIC 00-BEA4*
Diesel oil stove with 12 volt fan
12 volt fan & one turn hot water coil
32 volt fan & one turn hot water coil
*Request items
► Also See:
Diesel Heaters pg 352
APPLIANCES
SWD 3342-1112
333
334
Diesel Stoves
Dickinson Atlantic
Dickinson Bering
This large model is equipped with a bigger
natural draft diesel burner. Its cooking
capacity can serve a crew of 6-8 and for
boats 45-60ft.
Utility model for boats 36ft-40ft.
Manufactured with a single stainless steel
wall. This model has the chimney outlet
exiting from the right side of the cast-iron
top. Cooking surface and oven size is similar
to the Paci c though the stove is longer and
narrower.
Oven Size
Overall
W: 16" x D: 12-1/2" x H: 12"
W: 30.5" x D: 23" x H: 28.75"
Oven Size
5" / 12.7 cm
W: 10-1/2" x D: 13" x H: 10-1/2"
W: 24" x D: 16.5" x H: 20.5"
Material
S/S cast-iron cooking top
Flue Size
5"
Fuel
Diesel, Stove Oil or Kerosene
Material
Stainless steel cast-iron cooking top
Heat Output
BTU Low 8125 / High 24375
Fuel
Diesel (Stove oil or kerosene optional)
7" 'Air ow'
Heat Output
Low 6500 BTU, High 16250 BTU
Burner
6" / 15.2 cm 'Air ow'
Operation
Natural draft
Flue Size
Burner
APPLIANCES
Operation
Natural draft
Draft Assist Fan
Standard
Hot Water Coil
Optional (1 or 2 turn)
Weight
182 lbs
DIC 00-ATL*
DIC 00-ATL-32V*
DIC 00-ATL-1*
DIC 00-ATL-2*
DIC 00-ATL-1-32V*
DIC 00-ATL-2-32V*
Diesel oil stove with 12 volt fan
Stove with 32 volt fan
(one turn) hot water coil
(two turn) hot water coil
(one turn) hot water coil
(two turn) hot water coil
*Request items
Dickinson Bristol
Smallest model for boats up to
36ft. Features a small oven able to
accommodate a 9” x 9” baking dish. Ideal
for smaller vessels and designed primarily
for a fore and aft mount (facing port/
starboard).
Oven Size
Overall
W: 9" x D: 11-1/2" x H: 8-1/2"
W: 21" x D: 18.25" x H: 19.25"
Flue Size
4" / 10.16 cm
Material
Stainless steel/cast-iron cooking top
Fuel
Diesel (stove oil / kerosene optional)
Heat Output
Low 6500 BTU, High 16250 BTU
Burner
6" / 15.2 cm 'Air ow'
Operation
Natural draft
Draft Assist Fan
Standard
Hot Water Coil
Optional (1 turn )
Weight
82 lbs
DIC 00-BRI*
DIC 00-BRI-1*
*Request items
Diesel oil stove with 12 Volt fan
Stove with (one turn) hot water coil
Overall
Draft Assist Fan
Standard
Hot Water Coil
Optional (1 or 2 turn)
Weight
89 lbs
DIC 00-BER*
DIC 00-BER-1*
Diesel oil stove with 12V fan
Stove with (one turn) hot water coil
*Request items
Dickinson Paci c
Most popular model for boats 36ft-42ft.
Features a double, insulated stainless steel
outer surface, and an attractive appearance
that will enhance the interior of any vessel.
Its 22” maximum top width makes it the
most suitable size for most galley range
cutouts.
Oven Size
Overall
W: 10-1/2" x D: 13" x H: 10-1/2
W: 21.75" x D: 21.5" x H: 23.5"
Flue Size
5" / 12.7 cm
Material
Stainless steel/cast-iron cooking top
Fuel
Diesel (stove oil or kerosene optional)
Heat Output
Low 6500 BTU, High 16250 BTU
Burner
6" / 15.2 cm 'Air ow'
Operation
Natural draft
Draft Assist Fan
Standard
Hot Water Coil
Optional (1 or 2 turn)
Weight
DIC 00-PAC
DIC 00-PAC-1*
DIC 00-PAC-2*
DIC 00-PAC-32V*
*Request items
110 lbs
Diesel oil stove with 12V fan
Stove with (one turn) hot water coil
Stove with (two turn) hot water coil
Stove with 32 Volt fan
Diesel Stoves
335
Dickinson Stove Pipe and Elbow
Dickinson Adriatic
For medium & larger vessels.
Similar in appearance to the Paci c
for boats 40ft-50ft. Provides a larger
cooking surface and a wider oven that
is more accommodating.
Oven Size
Overall
W: 15" x D: 13" x H: 10-1/2"
W: 26.25" x D: 21.5" x H: 23.5"
Flue Size
5" / 12.7 cm
Material
Stainless steel cast-iron cooking top
Diesel (Stove oil or kerosene optional)
Heat Output
Low 6500 BTU, High 16250 BTU
Burner
6" / 15.2 cm 'Air ow'
Operation
Natural draft
Draft Assist Fan
Standard
Hot Water Coil
Optional (1 or 2 turn)
Weight
130 lbs
DIC 00-ADR*
DIC 00-ADR-1*
DIC 00-ADR-2*
Diesel oil stove with 12V fan
Stove with (one turn) hot water coil
Stove with (two turn) hot water coil
*Request items
Dickinson Fuel Filter
Fuel lter and water trap. Comes with manual shut off.
Ports are 1/4" female NPT.
• Length Overall: 5-1/4" Width: 2-1/2"
• **Not for use with gas**
DIC 16-000
DIC 16-040
DIC 18-040
3" x 22" stove pipe
3" x 45o elbow
5" x 45o elbow
Galvanized Stove Pipe Elbows
Galvanized steel elbows are fully adjustable and may be rotated
to form either 45o or 90o connections. Available in a full range of
sizes.
STO 243A
STO 244A
STO 45GE
STO 245A
STO 246A
3"
4"
4-1/2"
5"
6"
Stainless Stove Pipe Elbows
Heavy gauge all stainless steel elbows are fully
adjustable and may be rotated to form either 45o or 90o
connections. Available in a full range of sizes.
SSP 30 E
SSP 40 E
SSP 45 E
SSP 50 E
SSP 55 E
SSP 60 E
3"
4"
4-1/2"
5"
5-1/2"
6"
Galvanized Cloverleaf Caps
DIC 20-010
Galvanized steel stove pipe caps in a
full range of sizes.
Dickinson Accessories and Parts
STO 153
STO 154B
DIC 01-030
DIC 01-031
DIC 01-072
DIC 01-081
DIC 01-091
DIC 02-000
DIC 02-004
DIC 02-200
DIC 03-040
DIC 03-060
DIC 04-050
DIC 04-060
DIC 04-070
DIC 05-020
DIC 05-050
DIC 07-000
DIC 08-000
DIC 08-010
DIC 08-030
DIC 11-000
DIC 14-000
12V fan motor blade & bracket
12V motor blade & bracket for Newport & Alaska
12V speed control & switch S/S housing
24V speed control & switch S/S housing
32V speed control & switch S/S housing
#3 D/0 metering valve
#3 S/0 metering valve
Metering valve repair kit
6" S/S burner ring
6" tall superheater
7" S/S burner ring
7" cast iron leg ring
7" cast iron split ring
Isoline cement, 5lb box
Mica window
6-3/4" x 10" cast iron lid
5" aluminum ue collar
Old style 5" aluminum ue collar
3" aluminum ue collar
S/S pot holders
Lid lifter
3"
4-1/2"
Stainless Cloverleaf Caps
All stainless steel stove pipe caps in a
full range of sizes.
SSP 30 C
SSP 35 C
SSP 40 C
SSP 45 C
SSP 50 C
SSP 55 C
SSP 60 C
3"
3-1/2"
4"
4-1/2"
5"
5-1/2"
6"
APPLIANCES
Fuel
Stainless steel construction. Designed
especially for Dickinson stoves and heaters.
336
Stove Pipe
Galvanized Stove Pipe
Top quality stove pipe of galvanized steel.
Available in two lengths, 15" and 30" and a
full range of diameter sizes.
APPLIANCES
Part #
Diameter
Length
STO 363
3"
15"
STO 364A
4"
15"
STO 364B
4-1/2"
15"
STO 365A
5"
15"
STO 365B
5-1/2"
15"
STO 366
6"
15"
STO 354A
4"
30"
STO 355A
5"
30"
STO 355B
5-1/2"
30"
STO 356
6"
30"
Stainless Steel Stove Pipe
Heavy gauge all stainless steel stove pipe.
Available in two lengths. 15" and 30" and a
full range of diameter sizes. 304 SS.
Part #
Diameter
Length
SSP 3015
3"
15"
SSP 3515
3-1/2"
15"
SSP 4015
4"
15"
SSP 4515
4-1/2"
15"
SSP 5015
5"
15"
SSP 5515
5-1/2"
15"
SSP 6015
6"
15"
SSP 3030
3"
30"
SSP 3530
3-1/2"
30"
SSP 4030
4"
30"
SSP 4530
4-1/2"
30"
SSP 5030
5"
30"
SSP 5530
5-1/2"
30"
SSP 6030
6"
30"
Galvanized Tapered Stove Pipe
Top quality stove pipe taper of galvanized steel for adapting 4" pipe
to 5".
STO 392
Stainless Tapered Steel Stove Pipe
Stainless steel stove pipe tapers for adapting
• 4-1/2" pipe to 5" and 5" pipe to 5-1/2"
• 9" lengths
SSP 5"-4-1/2"
SSP 5-1/2"-5"
Dickinson
Dress Rings, Flue Caps and Accessories
Handsome electro-polished stainless steel ue caps with excellent
weather proo ng and draft characteristics.
Part #
Size
Style
DIC 16-090
3"
H-Cap
DIC 17-090
4"
H-Cap
DIC 18-090
5"
H-Cap
DIC 16-080
3"
DP ue cap
DIC 17-080
4"
DP ue cap
DIC 18-080
5"
DP ue cap
DIC 16-070
3"
Dress ring
DIC 17-070
4"
Dress ring
Dickinson Barometric Flue Dampers
Stainless steel construction. Required to
stabilize inconsistent draft conditions.
DIC 16-010
DIC 17-010
DIC 18-010
3" pipe, 7" long
4" pipe, 7" long
5" pipe, 9" long
Dickinson Flue Guards
Attractive brushed stainless steel guard provides
protection from hot stove pipes. Comes complete
with mounting clamps.
• 22" long
DIC 16-030
DIC 18-030
For 3" stove pipe
For 5" stove pipe
Dickinson Deck Fittings
Stainless steel deck tting kits come
complete with the deck tting, dress ring,
heavy rubber gasket and fasteners.
DIC 16-050
DIC 17-050
DIC 18-050
3"
4"
5"
Dickinson BBQ's
Dickinson Spit re 180 Marine Grill
• 20 gauge stainless steel
• Mirror polished top with a grain
nished bottom
• Front and side cool touch handles
• Electronic ignition
• Thermometer
• Top rack for grilling perfection
• 1/4” rod grills
• Removable drip tray
• Will not blow out in the wind
• Includes black canvas cover
• Three year warranty on burners
• 180 square inches of cooking surface
• 11,000 BTU of wind proof grilling
• Weight: 30 lbs
• 24” W (Overall) x 13” H x 15” D
Dickinson
Optional Mounting Accessories
Universal Rail Mount
• Made for use with any Dickinson BBQ
• Mounts on square or round rails, 7/8" to 1-1/4"
• Mounts horizontal or vertical
• Quick release snap latch for easy removal
DIC 15-150A
Includes table mount legs
DIC 00-SPT-180
Superb S/S propane marine barbecue/oven. Many standard features
including nonstick, no- are cooking surface, removable drip tray
and deck legs. Roll away hood.
Large
• 11,000 BTU
• Cooking surface: 20” x 11” (227 sq.
in.)
• Overall: W: 28" x D: 12" x H: 14"
• Weight: 26 lbs
DIC 00-SBQL
Small
• 10,000 BTU
• Cooking surface: 16” x 9-1/4” (148 sq. in.)
• Overall: W: 24” x D: 10” x H: 12”
• Weight: 18 lbs
DIC 00-SBQS
Dickinson Round Sea-B-Que
One of the largest and most robust round
stainless boat barbecues on the market.
7,000 BTU and excellent fuel ef ciency.
Deck legs included.
• 18 gauge, 304 stainless steel
construction
• 162 square inch cooking surface
• 14-3/8” dia. cooking surface
• Electric ignition
• Removable nonstick porcelain grill sections
• Weight: 21 lbs
• 18” W x 16” D x 14-1/4” H
'Scotty ' Post & Socket Mount
• Made for use with any Dickinson BBQ
• Attaches to a 'Scotty' type rod holder
• Quick release snap latch for easy removal
• Universal knuckle allows positioning at any angle
DIC 15-150P
Fishing Rod Holder Mount
• Made for use with any Dickinson BBQ
• Attaches to most types of rod holders
• Quick release snap latch for easy removal
• Knuckle allows positioning at any angle
DIC 15-150F
Taff Rail Mount With Sockets
• Stand off mount for cap or taff rails
• Stainless steel tubes and sockets
• Rails slide out and fold for storage
DIC 15-187
Dickinson Accessories
DIC 15-080
Drip tray for small/large SEA-B-QUE
DIC 15-103
Ignitor assembly for round BBQ
DIC 15-120
Universal BBQ thermometer
DIC 15-170
Round Sea-B-QUE Cover
DIC 15-173
Sea-B-QUE Mount sockets
DIC 15-184
Large SEA-B-QUE cover
DIC 15-185
Small SEA-B-QUE cover
DIC 15-180
Small food/drink tray with utensil hooks
DIC 15-181
Large food/drink tray with utensil hooks
DIC 15-182PS
*Small porcelain grill section
DIC 15-182SS
*Small S/S grill section
DIC 15-183PS
*Large porcelain grill section
DIC 15-183SS
*Large S/S grill section
DIC 15-061
Replacement burner – small
DIC 15-060
Replacement burner – large
DIC 15-101
Igniter assembly for large & small Sea-b-que
DIC 15-110
Regulator w/knob
DIC 15-200
Aussie grill, S/S for SBQS
DIC 15-201
Aussie grill, S/S for SBQL
DIC 15-202
Aussie grill, S/S for SBQR
DIC 15-203
Aussie grill, S/S for SPT 180-G
*Small & large BBQ's require 4 sections for a complete grill
APPLIANCES
Dickinson Sea-B-Que Grills
DIC 00-SBQ-R
337
Grills, Cookware & Accessories
M K-®
The World’s Most Popular Marine Grills
Combination Stove & Gas Grill
G S G
Grills Designed, Built, And Tested By Boaters For Boaters
“Cookware”
Magma offers the most
advanced and versatile
mounting hardware &
accessories anywhere!
www.magmaproducts.com
Magma Grills
339
Magma - Gourmet Series Grills Features
1 Full size inner safety shell
2 Reliable piezo crystal ignition
3 100% 18-9 mirror polished stainless steel
4 Convenient snap-out dual radiant plate
5 Large cooking grill
6 Large upper grill
7 Easy to read all S/S hermetically sealed thermometer
8 Oversized perfectly balanced lockable lid
9 Full-length handle
10 Front access, lock-in place grease tray
11 Swivelling valve regulator
12 Fold-Away legs
APPLIANCES
Magma Monterey
• Fold-away legs
• 12” x 24” cooking grill
Shown with optional mount &
• Large upper grill, for slow grilling serving shelf (sold separately)
or for warming food such as
vegetables or bread
• Easy to read all stainless steel hermetically sealed
thermometer, with 750-degree safety glass
• Grilling area: 420 sq. in.
Primary: 12” x 24”
Secondary: 5-1/2” x 24”
MGP A10-1225L
Parts:
MGP 10-265
MGP A10-224
MGP 10-1057
MGP 10-1254
MGP 10-960
Regulator, high output
Control valve, high output
Burner
Grill grate
Piezo ignitor
Parts:
MGP 10-264
MGP A10-223
MGP 10-1254
MGP 10-957
MGP 10-960
Regulator, medium output
Control valve, medium output
Grill grate
Burner
Piezo ignitor
Magma LPG Control Valves
• Fold-away legs
• 9” x 18” cooking grill
• Grilling area: 162 sq. in.
Parts:
MGP 10-263
MGP A10-220
MGP 10-954
MGP 10-957
MGP 10-960
• Fold-away legs
• 12" x 18" cooking grill
Shown with optional mount &
• Large upper grill, for slow grilling serving shelf (sold separately)
or for warming food such as vegetables or bread
• Easy to read all stainless steel hermetically sealed
thermometer, with 750-degree safety glass
• Grilling area: 315 sq. in.
Primary: 12” x 18”
Secondary: 5-1/2” x 18”
MGP A10-1218L
Magma Newport
MGP A10-918L
Magma Catalina
Shown with optional mount &
serving shelf (sold separately)
Regulator, low output
Control valve, low output
Grill grate
Burner
Piezo ignitor
For preregulated, low pressure, on-board LPG (propane) and CNG
(natural gas) systems. These stainless steel and brass control valves
are designed to connect to the low pressure side of the regulator.
Hose and ttings not included.
Magma offers the largest selection of mounting options and
accessories to customize your grill to your boat.
340
Magma Grills
Connoisseur Series Grills
•
•
•
•
•
•
•
•
Fold-Away legs
Inner Safety Shell
100% 18-9 mirror polished stainless steel
Convenient Snap-out radiant plate
Oversized perfectly balanced lockable lid
Full-length handle
Front access, lock-in-place grease tray
Swivelling valve/ regulator
Marine Kettle 2
Combination Stove & Gas Grills
•
•
•
•
•
•
•
•
Burner & hi-tech radiant plate & dome heat distribution design
Swivelling, windproof turbo venturi & control valve design
Hinged lid
Reliable Piezo Igniter
“Stay Cool” handle with air cooled supports
Cast 18-9 stainless L-bracket mount clamp
Double lined stainless steel inner safety shell
Patented design utilizes convection cooking
Magma Chefsmate
APPLIANCES
Wind tested for perfect even heat
distribution, this grill offers the
cooking performance usually only
found in large back yard grills.
• Fold-away legs: perfect for that
quick picnic on shore
• Front access, lock-in-place grease tray
• Grilling area: 162 sq. in. , Primary: 9" x 18"
* The fold-away legs are not recommended for use onboard.
Optional mounting hardware is available for mounting for on-board
use
MGP A10-803
Parts:
MGP 10-263
MGP 10-957
Control valve / Regulator, low output
Burner
Magma TrailMate
Small compact and powerful.
• Fold-away legs. perfect for that quick
picnic on shore
• Grilling area: 108 sq. in.
• Primary: 9” x 12”
MGP A10-801
Parts:
MGP 10-262
MGP A10-219
MGP 10-927
MGP 10-924
Regulator, extra low output
Control valve, extra low output
Burner
Grease catch pan
Magma Marine Kettle 2
• 9.5 lbs
• Grilling area: 15” diameter
Original size
MGP A10-207
• 11.8 lbs
• Grilling area: 17” diameter
MGP A10-217
Party size
Parts:
MGP 10-263
MGP A10-220
MGP 10-657
MGP 10-960
Regulator, low output
Control valve, low output
Burner
Piezo ignitor
► NOTE:
All Magma Gas Grills use standard disposable 1-lb.
propane canisters or adapt to on-board LPG (propane)
or CNG (natural gas) systems.
Magma Adventurer Electric Grill
120 Volt, 1500 watt electric
grill is perfect for use in
marinas that do not permit
open ame grilling or on
boats that use AC appliances.
Thermostatically controlled
temperature adjustment. 100%
mirror polished 18-9 stainless
steel for durable use in harsh
environments.
Includes:
• Fold-away legs
• Locking grease tray accessible from either side of the grill
• Locking lid
• Locking removable cord with heat control
• Stay cool lid/carrying handle for easy transport
Uses Magma single mount (SM) onboard mounting options for
rectangular grills.
*DO NOT USE LEGS ON BOAT
MGP A10-703E
Magma Gourmet & Connoisseur Mounts
341
Gourmet & Connoisseur Series Grill Mounts
Magma Dual Horizontal
Round Rail HD Mounts
Magma Pow'rGrip/LeveLock
Double Locking
All-Angle Adjustable Rod
Holder Mount HD
Incredibly strong and rigid, these rail
mounts will not slip on the rail. They
have a unique pivoting design which
allows them to attach to curved rails
or across the corner of a stern rail. Made of 18-8 stainless steel and
356 anodized aluminum, they instantly detach without tools for
compact storage leaving no hardware on the rail.
• Fasteners for attaching this mount to Gourmet series grills are
included with the grill.
Mount adjusts and locks in place at
both ends by joining the "LeveLock" adjustable sh rod holder
mount, with the "Pow'rGrip" adjustable sh rod holder mount.
This allows the "Pow'rGrip" portion of the mount to adjust to any
size rod holder and lock in place, while the "LeveLock" portion
of the mount, adjusts and locks your Magma rectangular grill:
Tournament Series Cleaning Station; or Bait/ Filet Mate™ Single
Mount Table to any desired position.
MGP T10-375
Most popular mount is "Hard
Anodized" to "aircraft quality" for the
greatest resistance to corrosion. Increased range of this already
highly adjustable mount; makes it extremely strong, corrosion
resistant, and versatile.
NOTE: The "New Style" LeveLock, T10-355 is compatible with
both the Bait/ Filet Mate Tables and the new Tournament Series
Cleaning Stations
MGP T10-355
Magma Single Horizontal
Round Rail Mount
Extremely strong and features 2-way
adjustment for perfect horizontal
levelling. Made of 18-8 stainless
steel and 356 anodized aluminum, it quickly detaches without tools
for compact storage leaving no hardware on the rail.
MGP T10-380
7/8” or 1”
1-1/8" or 1-1/4"
Magma Dual Extended
Horizontal Round Rail
Mount
This round rail, quick-disconnect,
mounting bracket is made entirely
of 18-8 stainless steel and hard and
356 anodized aluminum. Allows mounting of Gourmet Series Grills
out over the water. The quick-disconnect system allows quick
disassembly leaving no hardware on the rail.
MGP T10-680
MGP T10-685
1" horizontal round rails
1-1/4" horizontal round rails
Magma Dual Extended
Horizontal Square Rail
Mount
This all 18-8 stainless steel
mount extends your grill
or let table 8" in-board or
outboard and attaches to square or at rails up to 4-1/8" (104 mm)
high by any depth. Mount can also attach to any at vertical surface
such as bulkheads, gunnels, transoms, or cabin sides. Rod portion
of mount quickly disconnects for easy storage
MGP T10-641
Rails to 1"
Magma Socket Type Fish-Rod Holder Mount
Standard Duty
Magma Dual Extended Square Rail Mount
Fits Scotty®/Striker GripRod
holder sockets. These mounts
are designed to t the most
popular plastic rod holder
sockets. They quickly disconnect without tools for compact storage.
Designed to stow with grill while underway.
*Rod Holder Not Included
This all 18-8 stainless steel
mount extends your grill or let
table 8" in-board or outboard and
attaches to square or at rails up
to 2-1/4" (57 mm) high by any
depth. Mount can also attach
to any at vertical surface such as bulkheads, gunnels, transoms,
or cabin sides. Rod portion of mount quickly disconnects for easy
storage. Some fasteners required for installation.
MGP T10-365
MGP T10-640
Magma Single Locking
Flush Deck Socket Mount
Magma Dual Locking
Flush Deck Socket
Mount HD
This attractive mirror polished 18-8
stainless steel ush deck socket set
features a push button lock pin and
includes a ange gasket with integral ip-up water seal
cap. Some fasteners required for installation.
MGP T10-326
Two attractive mirror polished 18-8 stainless steel ush deck socket
sets features a push button lock pin to allow use while underway.
Includes a ange gasket with integral ip-up water seal cap. Some
fasteners required for installation.
MGP T10-526
APPLIANCES
Magma LeveLock All-Angle
Adjustable Fish Rod Holder
Mount HD
MGP T10-580
MGP T10-585
342
Magma Kettle Mounts
Marine Kettle Series Grill Mounts
Magma
Square/Flat Rail Mount or
Side (Bulkhead) Mount
Magma
Socket Type Rod Holder Mount
These rod holder mounts t the popular Scotty and many other
socket type rod holder mounts. They allow the “Marine Kettle”® to
be locked in 12 different positions and quickly disconnects for easy
storage without tools. Rod holder sockets not included.
• Fits Scotty rod holder sockets
• 18-8 stainless steel and durable all-weather plastic
This all 18-8 stainless steel mount
attaches to any vertical at surface such
as bulkheads, hulls, transoms or cabin sides. Also mounts to square
or at rails. Fits HORIZONTAL RAILS up to 2-1/4” (57 mm) high
by any depth or VERTICAL RAILS up to 1- 5/8” (41 mm) wide
by any depth. Rod portion of mount quickly disconnects for easy
storage. Some fasteners required for installation.
MGP A10-240
MGP A10-165
APPLIANCES
Magma
Round Rail Mount
This round rail, quick-disconnect, all
angle mounting bracket is made entirely
of 18-8 stainless steel and 356 anodized
aluminum. Fits any angle railing and
detaches quickly for storage without
tools leaving no hardware on the rail.
MGP A10-080
MGP A10-085
7/8 or 1”
1-1/8 or 1-1/4"
Magma
Flush Deck Socket Mount
This mount is made of 18-8 stainless steel.
A stainless detent pin lets the grill rotate
and lock in 8 different positions allowing
it to be moved inboard and outboard.
Mount includes a raincap. Rod portion of
mount quickly disconnects for compact
storage. Some fasteners required for installation.
MGP A10-126
Magma Mounting Bracket
• Fits Tempress Fish-On Rod
Holder Sockets
• 18-8 stainless steel
These rod holder mounts t the popular Tempress and many other
socket type rod holder mounts. They allow the "Marine Kettle" to
be locked in 12 different positions and quickly disconnects for easy
storage without tools. Rod holder sockets not included.
MGP A10-160
Magma offers the largest selection of mounting options and
accessories to customize your grill to your boat.
Magma Gas Grill Serving Shelves with Removable
Cutting Board
18-8 Stainless steel detachable serving
shelf with U.V. stabilized high-density,
FDA approved polyethylene cutting
board. Attaches and detaches instantly
for quick and easy clean-up or storage.
Stores inside of grill when not in use.
MGP A10-901
MGP A10-902
Magma
Pow'r Grip
Fish Rod Holder Mount
Made of 18-8 stainless steel and
durable all weather plastic, this vastly
improved versatile mount ts most
cylindrical type rod holders. It allows grills to mount in any
direction from the rod holder. Its unique quick disconnect system
allows instant installation or storage after use without tools.
Rod holder not included.
MGP A10-175
12”
17-1/4”
Magma
Third Mate Cockpit Tablet
This versatile table is made of the
same material and has all the great
features of the "Bait/Filet Mate"
with some additional features. The
windscreen, made of Paci c Blue
Sunbrella boat cover material, is supported by four stainless steel
uprights and provides protection against gusty wind and choppy
sea conditions. It also features a full length front guard rail and
a stainless steel towel and utensil rack. The windscreen detaches
quickly for compact storage. "Single-Mount" (SM) mounting
hardware is required for complete installation.
• 12" x 24"
MGP T10-306
Magma Accessories
Magma Bait/Filet Mate Table
with Levelock Mount
(Rod holder, let knives and
pliers not included)
• Excellent for leting sh or
serving food and beverages
• Made from FDA approved, high
density, polyethylene
• Will not crack, mildew or absorb
sh odours
• Features 2 let knife holders and a receptacle for pliers
• The slot at the back of the tables permits water drainage
• Levelock mount is made of heat treated stainless steel and hard
anodized aluminum
• Quick release cam-action design allows all-angle adjustment
• 1-1/2" 18-8 S/S tube ts into most cross-pin type rod holders
• Folds at for convenient storage
• 12-3/4” D x 20” W
MGP T10-312
Magma Pedestal Mount
Shown with the A10-1218 grill
The pedestal locks into the mounting base
and the grill or table locks to the pedestal.
The grill or table is instantly removable
from the pedestal with a simple pushbutton release. The pedestal also is
instantly removable from the mounting
base with a push-bottom release that
allows the pedestal to be unthreaded and
removed for storage. The low-pro le,
threaded twist-lock surface mount base
measure just 5/8” tall and 7’ in diameter
with a 5-3/4” bolt pattern. There is
no need to cut a hole in your deck. Made of durable anodized
Aluminum with a brushed satin nish. Height: 28”.
MGP T10-185
Magma
Universal Pedestal Adapter
Required when mounting Magma
rectangular grills to non Magma pedestal
mounts (Todd, Garelick, Spring eld)
MGP T10-180
Magma Storage Bag
• Safe, convenient and essential for boats
without approved propane or butane
gas storage lockers
• Stows 3 disposable butane or propane
canisters safely out-over-the-water
• Made of water and fade resistant heavy duty
nautical blue polyester boat cover material
• Has heavy nylon adjustable straps with snap connectors for
attaching to a horizontal rail or lifeline
MGP A10-210
343
Magma Grill Covers
• Water and fade resistant Sunbrella boat cover material
resists damage from sunlight and mildew
• 5 year warranty covers the fabric becoming unserviceable
because of loss of colour or strength from normal exposure
conditions, including sunlight, mildew, rot and atmospheric
chemicals
• 1 year warranty on all other components
Gourmet & Connoisseur Series
MGP A10-890JB
Trailmate, jet black
MGP A10-890PB
Trailmate, paci c blue
MGP A10-890RB
Trailmate, royal blue
MGP A10-990RB
Newport/Chefmate, royal blue
MGP A10-990JB
Newport/Chefmate, jet black
MGP A10-1290JB
Catalina, jet black
MGP A10-1290RB
Catalina, royal blue
MGP A10-1291JB
Monterey, jet black
MGP A10-1291RB
Monterey, royal blue
Marine Kettle Series
MGP A10-191JB
MGP A10-191RB
MGP A10-492JB
MGP A10-492RB
Original size, jet black
Original size, royal blue
Party size, jet black
Party size, royal blue
Magma Cookware Sets
A 10 piece 18-10 stainless steel
cookware set that nests for storage in
less than a 1/2 cubic foot of cabinet
space. Available in S/S or with DuPont
Te on Select non-stick coatings for
worry-free cooking and simple cleanup. The set includes three Sauce Pans
(1-1/2 qt., 2 qt., and 3 qt.), a Lid that
ts all three saucepans, a 5 qt. Stock
Pot, a 9-1/2 inch diameter Sauté Pan,
a lid for the Stock Pot and Sauté Pan, 2 removable handles, and
a convenient "Bungee" storage cord. All have triple clad bottoms
(stainless steel, aluminum, stainless steel) and are milled perfectly
at for even heat distribution on gas, electric or ceramic cooktops.
All the cookware is oven safe and dishwasher friendly.
MGP A10-360L
MGP A10-365L
Stainless steel
Te on
344
Magma Accessories
Magma LPG Hose Conversion Kit
Magma Boat Umbrellas
Used in conjunction with the MGP A10-224
high output valve, this kit allows you to connect
your Magma gas grill into your on-board,
preregulated, low pressure LPG (propane)
system. Includes all necessary brass ttings,
safety shutoff valve and 10 feet (3 m) of
preassembled, leak tested hose.
MGP A10-225
The 7/8” to 1” round rail mount adjusts
to t any angle on your vertical or
horizontal railing or stanchion. Made with
noncorroding materials, its new windproof
design will not allow the canopy to turn
inside out or lose it’s shape in gusty wind
conditions. A special patented annular
baf e is double stitched to the interior
and kept rigid by a stabilizing cord.
The canopy measures 6 feet across the
bow. Fade resistant acrylic coated fabric
is stretched over specially designed
polymer bow ribs that will not rust or
stain the fabric. The 5 foot long shaft is
made of exible double cored breglass and has a chrome brass
joint for compact storage in its own nylon carrying case. The extra
heavy load design of the clamp will not allow the boat umbrella
to slip on the rail. Made of 18-8 stainless steel and 356 anodized
aluminum, it quickly detaches without tools leaving no hardware
on the rail.
Magma Parts & Accessories
"L" Bracket & Clamp
MGP 10-164
Standard
MGP 10-664
Heavy duty
APPLIANCES
Round, plastic rail adapter
MGP 10-047
7/8" to 1" or 1-1/8" to 1-1/4"
Lever, Nylon Washer & Nut
MGP 10-043
Standard
MGP 10-043HD
Heavy duty
MGP B10-401
MGP B10-402
Multi-Colour
Blue
Parts:
MGP 10-481
Clamp assembly
Piezo ignitor
MGP 10-960
Notes
345
Propane Tanks / Lockers
Seaward Composite Tank Propane Locker
Propane Tanks
Type I, DOT approved steel propane
cylinders for camping, cooking, gas grills,
recreation vehicles, boat propane lockers,
etc.
Height
Diameter
Capacity
PRP PTS5-1OPD
Part #
10-7/8"
9-1/4"
4-1/4 lbs
PRP PTS10-1OPD
16-3/4"
9-1/4"
11 lbs
1OPD = Over ll protection type valve
Seaward Welded Aluminum Propane Tanks
All tanks DOT approved.
• Brass valve
• Will never rust out
APPLIANCES
A completely self-contained propane system for installation above
the water line. Rotational molded polyethylene construction. Sealed
lid with molded inserts holds tank secure even in the roughest
sea conditions. Vent port allows overboard venting. Hold down
brackets for easy installation. Quick release lid facilitates access
to tank, regulator, and leak test gauge. Systems include: breglass
tank, regulator, leak test gauge, vent kit and
solenoid.
• 16-1/2" x 13-1/2" x 18-1/2"
• 10 lb tank
Composite cylinders are manufactured using
wound breglass and special plastics creating a
strong, transparent and light weight container.
• 30% lighter than steel
• Corrosion free
• Protective outer casing
• All cylinders are pre-purged
• Approved by the DOT special permit
#13957
SWD 93272
Seaward Compact Propane Lockers
A completely self contained propane system. Rotational molded
polyethylene construction. Sealed lid with molded inserts holds
tank secure even in the roughest sea conditions. Vent port allows
overboard venting. Hold down brackets for easy installation. Quick
release lid top facilitates access to tank, regulator, and leak test
gauge. System includes: one gallon tank, regulator, leak test gauge,
vent kit and solenoid.
SWD 93268
5 lb locker kit with steel tank & solenoid
• W: 16" x D: 14-1/4" x H: 12-1/4"
Propane regulator only
Seaward Propane Tanks
Composite cylinders are manufactured using
wound breglass and special plastics creating a
strong, transparent and light weight container.
• 30% lighter than steel
• Corrosion free
• Protective outer casing
• Stackable
• Bar coded and serial numbered
• All cylinders are pre-purged
Approved by the DOT special permit #13957
Net
Propane
Dia
O.L.
Tank wt.
SWD LC10-BLUE
10 lbs
9.7"
17.3"
9.6 lbs
SWD LC20-BLUE
19 lbs
12.4"
18"
12.6 lbs
Part #
SWD 93136-M
• 20# Vertical. 5 gallons
• 12-3/8" W x 21" H
SWD 93137-M
• 10# Horizontal. 2.5 gallons
• 17" W x 11" H
SWD 93138-M
• 20# Horizontal. 5 gallons
• 21" W x 13" H"
SWD 93271
10 lb. locker kit with aluminum tank & solenoid
• W; 16-1/2" x D: 13-1/2" x H: 18"
Parts:
SWD 73509
SWD 93131-M
• 10# Vertical. 2.5 gallons
• 10-3/8" W x 17" H
* Re-certi cation date for all composite cylinders is 15 years
*Re-certi cation dates
for all aluminum tanks is
12 years*
346
Propane Hoses
Fairview Hose Assemblies
Fairview Hose Assemblies
Used to connect the stove to the regulator.
FS 3/8" x FS 3/8" ttings with rubber hose.
Part #
APPLIANCES
Hose I.D.
Length
PRP I4C120FS6FS6
1/4"
120"
PRP I6C60FS6FS6
5/16"
60"
MP 1/4" x QCC 1-5/16" x I.D. 1/4" ttings with rubber hose.
PRP I6C60FS6FS6
3/8"
60"
PRP I4C18MP4QCC
PRP I6C120FS6FS6
3/8"
120"
PRP I6C180FS6FS6
3/8"
180"
PRP I6C240FS6FS6
3/8"
240"
PRP I6C258FS6FS6
3/8"
258"
PRP I6C300FS6FS6
3/8"
300"
18"
Fairview Hose Assemblies
Fairview Hose Assemblies
BBQ hose to Add-A-Flow tee adapter #PRP 2012.
FC 1"-20 x MC 1"-20 Hose I.D. 1/4".
Length
Hose
PRP I4TC72FCMC
Part #
72"
Rubber
PRP I4TC144FCMC
144"
Thermoplastic
Used to connect the regulator to the tank.
MP 1/4" x Standard POL 1/4" ttings with rubber hose.
PRP I4C18MP4POL
PRP I4C24MP4POL
PRP OR-POL
18"
24"
Spare O-ring
Fairview Hose Assemblies
Fairview Hose Assemblies
• BBQ hose direct to tank. MC 1"-20 x POL H/W x I.D.
1/4"Thermoplastic hose
MI 1/4" x Standard POL 1/4" ttings with rubber hose.
PRP I4C18MI4POL
PRP I4C24MI4POL
18"
24"
PRP I4TC72MCPOLHW
PRP I4TC144MCPOL
72"
144"
347
Propane Fittings
Fairview Reserve Cylinder Adapter
Fairview Propane Pressure Gauges
• Brass construction
• Cylinder thread: 1"-20
• P.O.L. Female
PRP 2097
All pressure gauges have 1/4" MPT connection.
Fairview Tailpiece with O-Ring
Case
Material
Max.
Pressure
Case
Size
PRP PG-200CD2
Steel
200 P.S.I.
2" dia.
Back
PRP PG-300SD2
Steel
300 P.S.I.
2" dia.
Bottom
Part #
Mount
Fairview Two Stage Regulator
PRP GR-9950
Fairview Single Stage Regulator
Die cast zinc. Molded rubber diaphragms with
175,000 BTU capacity.
• Ideal for portable devices
• Mounting holes on 3 1/2" centre
• Inlet 1/4" FPT
• Outlet 3/8" FPT
PRP GR-800
Hand wheel for tailpiece
Fairview Manifold for Dual Tanks
• Inlet -1/4" inverted are
• Outlet -1/4" Male pipe
APPLIANCES
Die cast zinc, high quality, two stage (high- low) pressure regulator
with molded rubber diaphragms and 160,000 BTU capacity.
• Mounting holes on 3-1/2" centre
• Inlet 1/4" FPT
• Outlet 3/8" FPT
• Ideal for larger applications
• Weight 1 lb.
• 5-3/4" L x 3-1/8" W x 2-5/8" H
• 1/4" MPT
PRP 2003-T
PRP HW
PRP 2000
Fairview P.O.L. To QCC Adapter
• Brass construction
• QCC: Female
• P.O.L. Male
PRP 2087
Fairview Propane Thread Sealing Tape
Use for sealing threads on ttings used in propane
installations.
PRP 121M8-UL
1/2" x 236"
Fairview Auto Change-Over Regulator
The change-over feature of this regulator
gives the user the bene t of a continuous
gas supply by automatically changing to a
reserve cylinder when the service cylinder
is empty. It features a green indicator dome
which changes to bright orange when the
service cylinder needs to be re lled. A
gentle push on the sliding face plate will
change from the reserve cylinder back to the service cylinder.
► Also See:
Telfon Tape pg 369
Fairview Regulator Accessories
PRP GR-9984
Fairview Add-A-Flow Tee
This adaptor allows the use of the existing
regulator and supply line while providing
an outlet to supply fuel to a BBQ that has
its own regulator.
PRP 2012
Part #
PRP GR-240-32
Description
Mounting bracket
Use with Regulator
No.
GR-254-00 &
GR-290-00
348
Dehumidifiers / Mildew Control
Dri-Z-Air
Dehumidi er
Davis Instruments Air-Dryr
Removes excess moisture. Helps prevent
condensation on windows and ceilings. Units
come complete with one 368 gram (13 oz.)
package of crystals.
DRI DZA-UNIT
Parts:
DRI DZA-REFILL
DRI DZA-60
DRI DZA-T
13 oz re ll
60 oz re ll
Spill tray
APPLIANCES
Star brite
No Damp Ultra Dome
A super dry, concentrated pellet formula absorbs
more moisture per ounce than ake formulas. The
actual amount absorbed will vary depending on
temperature and relative humidity. The unique
design of the dome allows maximum air ow over and through the
pellets for peak ef ciency. This design, which locates the pellets
above the trapped moisture, allows collection of up to 50% more
humidity from the air than traditional dehumidi ers. The super
dry pellets remain effective much longer than other units. The
over-sized container safely holds trapped liquid for disposal. The
mesh dome also prevents articles of clothing or other items from
accidentally coming in contact with the pellets or liquid.
STA 85460
Safe, inexpensive and effective way to ght
mould and mildew 24 hours a day. Cool,
damp air is drawn through the bottom base
panel, then heated and released through
the top perforated surface. This unit has no
fans, thermostats, switches, or moving parts,
nothing to fail or to cause a spark. Safe for
use even in the engine compartment of a boat. 120V, UL listed.
Air-Dryr 1000 covers up to 1000 cubic feet of living space. Draws
only 1.1 amps, 130 watts.
• 13.5" Diameter x 4.25" H
DIN 1458
Air-Dryer 1000
Air-Dryr 500 covers up to 500 cubic feet of living space. Draws
only 0.6 amps, 70 watts.
• 14 x 5 x 4.5"
DIN 1459
Air-Dryer 500
Caframo Stor-Dry
• Internal blower circulates air for
enhanced ventilation
• Continuous trouble free operation
• Anodized aluminum
• Low current draw, inexpensive to operate
• Safe and effective
• Sparkless for RV and boat applications
• 120 Volt
• 2 year warranty
CAF 9406
24 oz
Caframo Compact Heater
Star brite
MDG Mildew Odour Control Bags
Each pack contains: 2 - 4 oz. bags, 2 - decor
holders and 2 - hang ties. Dries air to level where
mildew odours and associated musty odours will
not form. Nontoxic, formaldehyde free. Each bag
protects 400 cu. ft.
• Fresh scent
• Comes with display carton
STA 89900
2/pkg
Star brite
No Damp Hanging Moisture Absorber Bag
• Eliminates mildew odours and other musty
odours
• Helps prevent damage & stains caused by
excess airborne moisture
• For use in any inclosed area
STA 85470
14 oz
• 120 volts
• Heat output:
Hi - 5083 BTU/HR
Med - 3389 BTU/HR
Low - 1694 BTU/HR
• "Anti-Freeze" setting
• Fan only option (18 watts)
• 5 year limited warranty
• 11-1/4" L x 8" W x 5" H
CAF 9206CABBX
Heaters
349
Delta T Systems Dehumidi ers
Heater Craft 200 Series Hydronic Heaters
Designed for occasional or continuous use,
water simply drains through a hose into a sink,
grey-water tank or overboard. It can remove a
maximum of 2.6 gallons per week at 86° F at
80% humidity and .4 gallons in typical winter
conditions. It is one-third the size of traditional
compressor/condenser type units and uses a
fraction of the power, employing state-of-the-art
Peltech GEOtronic Technology, with a small,
solid-state heat pump
• Marine-grade materials and components
• 8-1/4" W x 13-1/3" H x 5-1/3" D
• 8.6 pounds
• Use as a portable device or install permanently
• Consuming merely 66 watts
• Ignition protected
Acu-Heat’s technology is similar to a car heater, using the hot water
generated by the engine’s cooling system. Each series is compatible
with a freshwater cooled I/O or inboard engine. Designed to
withstand the harsh marine environment.
12V
24V
Xtreme Bilge Heaters
True forced air heating circulates air
more effectively, heats more evenly for more
accurate climate control. Other “radiator”
style heaters rely on convection, leaving
cold areas in the engine compartment.
Forced air assures a more accurate and
consistent temperature in the entire engine
compartment.
• CFM: 32
• 120V
Automatic thermostat turns heater on at 40°F and off at 55°F
+/-3° the tightest tolerance on any bilge heater on the market. Other
heaters have a 5° tolerance in their thermostats, which can result in
an inaccurate reading and inconsistent temperature control.
Failsafe design cannot overheat. The temperature-limiting
characteristic heating technology is dynamic and self regulating.
Other heaters have no way of limiting their temperature should
something go wrong.
Certi ed Independently Tested to Meet:
• U.S. Coast Guard Ignition Protection Standards
• Transport Canada Ignition Protection Standards
• ABYC E-11
• SEA J1171
• ISO 8846
• MIL-SPEC 810E
Watts
BTU's
WxLxD
Amp
Draw
XTR XHEAT
300W
1023-1790
6" x 4" x 5-1/8"
3
XTR XXHEAT
450W
1535-2130
8" x 4" x 5-1/8"
4
XTR XXXHEAT
600W
2050-2725
8" x 4" x 5-1/8"
6
Part #
HCM 201-H-B
HCM 201-H-B 24V
HCM 203-H-B
12V, Includes two eurovents
24V, Includes two eurovents
12V, Includes one eurovent and one hot tube
Spare Parts:
HCM H-202
HCM H-205
Heater core 95 & up
Heater fan wheel
APPLIANCES
DTS 801-DRYBOAT-12
DTS 801-DRYBOAT-24
Perfect for the family runabout. 28,000 BTU/hr’s of glorious heat
is easily vented to bow or rear seating areas while second vent can
be ducted to the helm. Kit features: three-speed fan. Heater housing
is constructed of heavy duty marine grade aluminum and powder
coated to prevent corrosion.
• Amperage: Low 4.4, Med 5.8, High 8.5
• Max. est. BTU/h: 28,000
• Air ow: Low 230 cfm, Med 228 cfm, High 263 cfm.
• Hose barb: 5/8” or 3/4” (special)
Kit includes
1-Heater unit with wire harness.
2-Universal mounting brackets with screws
3-14” Heavy duty wire ties
1-Switch plate and indicator assembly
2-6’ lengths of 14 gauge wire.
2-6’ lengths of 3” vent hose
2-directional Euro vents Dim: 9.4" W x 6.4" H x 9.35" D
350
Heaters
Heater Craft 300 Series Hydronic Heaters
APPLIANCES
High output with lots of exibility. 40,000 BTU/hr of heat is ducted
to three separate areas of the boat. Features: three-speed fan. Heater
housing is constructed of heavy-duty marine grade aluminum and
powder coated to prevent corrosion.
• Amperage: Low 4.7, Med 6.3, High 9.2
• Max. est. BTU/h: 40,000
• Air ow: Low 188 cfm, Med 250 cfm, High 266 cfm.
• Hose barb: 5/8”
Kit includes:
1-Heater unit with wire harness.
2-Universal mounting brackets with screws
14” Heavy-duty wire ties
1-Switch plate and indicator assembly
2-6’ lengths of 14 gauge wire.
2-6’ lengths of 3” vent hose
• Dimensions: 15.95" W x 6.55" H x 9.4" D
HCM 301-H-B
HCM 303-H-B
HCM 317-H-4B
12V, includes three eurovents
12V, includes two eurovents and one hot tube
12V, includes four eurovents
Spare Parts:
HCM H-301
HCM H-304
Heater core
3-H, 4-H fan motor assembly
Heater Craft 700 Series Hydronic Heater
A low amp draw, heat delivery solution for larger boats or yachts
that utilize a fuel red boiler system. This 9790 BTU/h heater
delivers quiet, reliable heat with an amperage draw of only 0.95.
Unit features: single speed fan. Inside: long lasting tube and n
heater core with 3/4” hose barb is neatly kept within a heavyduty marine grade aluminum housing that is powder coated to
prevent corrosion. Heat is ducted through two 3” outlets to single
directional euro vent.
• Amperage: 0.95
• Max. est. BTU/h: 9790
• Air ow: 140 cfm
• Hose barb: 3/4”
Kit includes:
1-Heater unit with wire harness.
2-Universal mounting brackets with screws
4-14” Heavy-duty wire ties
2-6’ lengths of 3” vent hose
2-directional eurovents
HCM 702-H2-B
Heater Craft Mercury Optimax SportJet 200 Heater
Plumbing Kit
Our innovative design extracts heat energy from two cycle SportJet
power heads, then directs it to where it is needed the most–to the
passengers. This plumbing kit is used in conjunction with any of
Heater Crafts’ ducted or grilled 3/4” hose barb hydronic heater
assemblies. This exibility gives the boat owner a choice of 28,000
BTU/h or 40,000 BTU/h heat output and a multitude of venting
options.
• Two year warranty
Kit includes the following pieces:
• 50’-3/4” 150 psi. heater hose
• 5’- 5/8” 150 psi. heater hose
• 1-Pressure relief block-off plate with
5/8” hose barb
• 1-Thermostat and housing
• 1- 5/8” barbed thru-hull tting
• 2- #8 SS hose clamps
• 6- #10 SS hose clamps
• 8- 14” UV wire ties
• 1-Installation guide
HCM H-401SJ
Heater Craft Hot Tube Extendable Vent
Extended
Hot Tube extendable vent puts
Closed
heat where you want it. Pull out
Hot Tube vent and place under
jacket or towel lling air space with luxurious warmth. New
updated design allows regulation of air ow from wide open to
completely off. When not extended Hot Tube acts as a traditional
adjustable heating vent. Hot Tube accepts stylish accent rings sold
separately in choice of white, chrome or brushed aluminum. Comes
with a length of heater tube for installation.
HCM H-521-B
Heaters
Heater Craft Accessories
HCM E-112
HCM E-113-B
HCM H-207
HCM H-401
HCM H-501-3
HCM H-503
HCM H-504-B
HCM H-504-W
HCM H-505
HCM H-506-B
HCM H-510
HCM H-512-B
E-113
4 position rotary switch for 200, 300, 400 & 500H units
4 position rotary switch mounting plate for E-112
3-Speed motor fan assembly
Hose & tting kit, 25' of 5/8" hose with clamps and all the
pipe ttings required to connect to the engine
3" I.D. vent hose (sold by the foot)
3" “Y” tting
Eurovent - Black
Eurovent - White
Surface mount for eurovent
Surface mount 4" rotaire vent-Black
Surface mount for hot tube
Hot tube only w/black grill
351
H-207
H-503
H-506-B
H-510
H-512-B
Utilizes waste water heat produced by a water cooled engine or any circulating hot water source to generate forced air
heat. High quality stainless steel construction. Self contained units include either single or double high ef ciency 12V
fans and illuminated rocker switches. Flush mount frame or side mount brackets sold separately. Rear exit tting:
3/4" O.D. copper tubing.
BTU
Hour
Air Flow
(CFM)
Fans
Amps
Dimensions
W" x H" x D"
DIC 00-RAD-1
12,000
100
one, 12V
0.74
10-3/8 x 7 x 5
DIC 00-RAD-2
24,000
200
two, 12V
1.48
16-7/8 x 5 x 5
Part #
Parts:
DIC 22-001
DIC 22-002
DIC 22-003
DIC 01-041
Radex 1 & 2 side mount kit
Radex 1 frame mount kit
Radex 2 frame mount kit
12V fan only
Red Dot Auxiliary Heaters
Versatile and maintenance-free. Round tube and n design allows heater mounting in any position, using our multi-position leg brackets or
ush mount frame. The compact size, simple plumbing and high output are ideal in any application. Spot-welded, steel plate construction
nished in a decorative, chip resistant black paint. Use with fresh water cooling systems only. Comes complete for oor or bulkhead
mounting. Two speed fan motor. Rear exit ttings: 5/8" hose barb.
BTU/ hour
Air Flow
(CFM)
Motor (s)
Current Draw
(Amps)
RED R-254-0
16000
150
One, 12V
3.3
9-1/4 x 6-3/4 x 3-3/4
RED R-254-0-24
16000
150
One, 24V
1.7
9-1/4 x 6-3/4 x 3-3/4
RED R-255-0
30000
280
Two, 12V
6.6
16 x 6-3/4 x 3-3/4
RED R-255-0-24
30000
280
Two, 24V
3.3
16 x 6-3/4 x 3-3/4
Part #
Parts:
RED RD-5-10491-24P
RED RD-5-10491-OP
RED RD 5-8641-1P
RED RD 3133-9P
RED RD-1-0355-OP
24V Motor only F/(254/255OP)
12V Motor only F/(254/255OP)
12" Fan upgrade kit 24V
Fan only (254/255)
Heater core (254/256)
Dimensions
W" x H" x D"
APPLIANCES
Dickinson Radex Hot Water Forced Air Heaters
352
Heaters
Red Dot Heater Defroster
Dickinson Antarctic Heaters
A versatile and high-output heater/defroster
runs off of a fresh water cooling system. The
blower housing can be rotated 360 degrees
in four separate positions so heat and defrost
outlets are where you need them. The compact
design often allows under-dash or other compartment installation.
Along with a two-speed motor, a diversion door can be manually
or cable-operated to control defrost and heat output. Finished in
chip resistant black paint.
• BTU's hour: 20000 @ 100oF air temperature rise
• Air ow: 185 CFM
• Dry weight: 15.7 lbs.
• Single motor: 12V DC, 2 speed
• Current draw: 11 amps
• Fittings: 5/8" hose barb
Large oor mounted diesel heater for boats 36ft-40ft. Size of heater
produces greater heat output than the smaller heaters although fuel
consumption is the same. Dry comfortable heat and large ame
viewing window. Manufactured in stainless steel. For larger cabins
and live a boards.
Defroster
RED R-4013HP
APPLIANCES
Parts:
RED RD-3196-5P
RED RD-4156-108P
RED RD 3106-13P
3-1/2" Defroster adapter
3-1/2" x 9' Defroster hose
Motor only
WxDxH
13" x 13" x 24.5"
Flue Size
3" / 7.6 cm
Material
Stainless steel body cast-iron top
Fuel
Diesel (stove oil or kerosene)
Heat Output
Low 6500 BTU, High 16250 BTU
Burner
6" / 15.2 cm 'Air ow'
Operation
Natural draft
Draft Assist Fan
Standard
Hot Water Coil
Optional (1 or 2 turn)
Weight
29 lbs
DIC 00-ANT*
DIC 00-ANT-12-1*
Diesel oil heater with a 12 Volt Fan
Heater with 12 Volt Fan & 1 Turn Coil
* Request Items
Dickinson Alaska Heater
Small, compact, oor , mounted diesel heater for boats 30ft36ft Attractive, economical diesel burning replace producing
comfortable dry heat.
Dickinson Lofoten Heaters
Rectangular, oor mounted heater for boats 36ft-40ft. Similar to the
Antarctic in performance but with a larger top area and a cast-iron
lid providing a top cooking surface.
WxDxH
10.75" x 17" x 18"
Flue Size
4" / 10.16 cm
Weight
25 lbs
Material
Stainless steel
Fuel
Diesel (kerosene optional)
Heat Output
Low 6500 BTU, High 16250 BTU
Burner
6" / 15.2 cm Air ow
Draft Assist Fan
Standard
Valve Code
2 Diesel/1 Kerosene
DIC 00-LOF
DIC 00-LOF-1*
DIC 00-LOF-KER*
* Request Items
WxDxH
8.75" x 10" x 21"
Flue Size
3" / 7.6 cm
Material
Stainless steel body and top
Heat Output
Low 6500 BTU High 16250 BTU
Burner
6" / 15.2 cm 'Air ow'
Operation
Natural draft
Draft Assist Fan
Standard
Hot Water Coil
Optional (1turn)
Weight
20.5 lbs
* Request Items
DIC 00-ALA*
► Also See:
Diesel oil heater/12V fan
Same with 1/turn coil
Kerosene oil/12V fan
Diesel oil heater with 12 volt fan
Diesel Stoves pg 333-335
Heaters
Dickinson Newport Diesel Fireplace
Bulkhead mounted diesel replace. Ideal for boats 30/36 ft.
Should be mounted as low as possible on the bulkhead to provide
excellent, dry, comfortable heat convection, to provide good natural
draft and to reduce through deck stack temperatures. Manufactured
in stainless steel.
Dickinson Newport Propane Fireplaces
•
•
•
•
•
•
•
Easy to install-easy to use
Unaffected by wind
Large glass viewing area
Safe direct venting
Safe manual ignition
Stainless steel back panel
28" exible vent pipe, deck
tting, blower fan & ue cap
included
WxDxH
8.5" x 10.5" x 19.75"
Weight
22 lbs
Flue Size
3" / 7.6 cm
Material
Stainless steel body & top
Fuel
Diesel (stove oil or kerosene optional)
00-NEW-P9000
00-NEW-P12000
Heat Output
Low 6500 BTU, High 16250 BTU
WxDxH
8.5" x 5.5" x 14"
10" x 7.25" x 16"
Burner
6" / 15.2 cm 'Air ow'
Weight
15 lbs / 6.82 kg
22 lbs / 10 kg
Operation
Natural draft
Flue Size
Draft Assist Fan
Standard
Material
Stainless steel body
Valve code
3 (D, S or K)
Voltage
12 Volt / 0.17 amps
* Request Items
Dickinson Newport Solid Fuel Heater
Small heater designed for casual use. Burns wood, charcoal
briquettes and coal. Removable ash drawer and damper
control. Mounting brackets included.
WxDxH
7.88" x 10" x 14.75"
Flue Size
3" / 7.6 cm
Weight
12 lbs
Material
Stainless steel body & top
Fuel
Charcoal briquettes, wood re logs,
solid fuels.
DIC 00-NEWSF
Dickinson Heatex
The Heatex by Dickinson utilizes the heat produced by your stove's
exhaust. Obtain extra warmth where you need it - in the cabin, the
galley or the sleeping quarters. Simply install the Heatex in place
of your stovepipe and run the hoses to the area to be
heated. All stainless steel construction. Complete with
100 cfm 12V fan.
DIC 00-HEA3*
DIC 00-HEA4*
DIC 00-HEA5*
*Request items
Use with 3" ue
Use with 4" ue
Use with 5" ue
*Low pressure regulator required (not included)
Heat Output
2.5" OD double wall / 28" long
Low 5500 BTU
Low 7000 BTU
High 7500 BTU
High 9700 BTU
DIC 00-NEW-P9000
DIC 00-NEW-P12000
Parts:
DIC 19-000
DIC 19-150
28" Double walled exible S/S pipe extension
w/ connector sleeves
Low pressure regulator with mounting
bracket for 1 lb disposable propane bottles
APPLIANCES
Diesel oil heater/12 Volt Fan
Heater/24 Volt Fan
Heater with a one turn coil
DIC 00-NEW
DIC 00-NEW-24V*
DIC 00-NEW-1TC*
353
354
Water Heaters
Seaward Water Heaters
An economical, combination electric/engine heat exchanger, water heater. Heats water quickly from the 120/240 volt1500 watt, 13" electric element while on A.C. power or from the heat exchanger from the engine’s cooling system while
under way. Hold down brackets are welded directly to the aluminum tanks. Comes complete with a temperature pressure
relief valve, temperature & pressure drain tube and are ignition protected. Seaward tanks carry an extended 1 year
limited warranty on all parts and on tanks against leaks due to rust and corrosion.
• Domestic water ports: 1/2" IPT
• Heat exchanger: 5/8" hose barbs
• Re-settable 190° high limit switch
• Exterior choices are marine galvanized steel, powder coated aluminum or stainless steel
• UL & CE approved
• Rear exchangers have the 5/8" engine ttings on the back side
• Front exchangers have all connections on front side and are identi ed by an F in the beginning of the part number.
Part #
APPLIANCES
Heat Exchanger
Capacity
WxDxH
Material
SWD S300W
Side
3 Gallons
13" x 9" x 13"
Polycoated aluminum
SWD S600
Rear
6 Gallons
13" x 19" x 13"
Galvanized steel
SWD S600W
Rear
6 Gallons
13" x 19" x 13"
Powder coated white
SWD F600
Front
6 Gallons
13" x 19" x 13"
Galvanized steel
SWD F600W
Front
6 Gallons
13" x 19" x 13"
Powder coated white
SWD F700
Front
6 Gallons
13" x 19" x 13"
Stainless steel
SWD S700
Rear
6 Gallons
13" x 19" x 13"
Stainless steel
SWD S1100
Rear
11 Gallons
16" x 22" x 16"
Galvanized steel
SWD F1100
Front
11 Gallons
16" x 22" x 16"
Galvanized steel
SWD S1200
Rear
11 Gallons
16" x 22" x 16"
Stainless steel
SWD F1200
Front
11 Gallons
16" x 22" x 16"
Stainless steel
SWD S1900
Front
18 Gallons
20-1/4" x 20-1/4 x 27"
Stainless steel
SWD HF-2200
Front
20 Gallons
16” x 32” x 16”
Stainless steel
Spare Parts:
SWD 74031
SWD 73127
SWD 73129
SWD 74563
SWD 74556
120V heating element
Pressure relief valve
Thermostat
High limit switch 120 volts
Magnesium 3/4" anode
Water Heaters
355
Torrid Water Heaters
These glass-lined electric water heaters have a super fast recovery from either dock side or AC generator power supply.
Exclusive heat exchanger design provides ample hot water from engine cooling system while under way. Adjustable
electric thermostat: 120°-180°F. The unique Incoloy element is designed to operate without damage if the tank is
dry. Units are covered by a 5 year limited warranty against failure of the storage tank, any electrical component or
mechanical part. Model No. denotes capacity in US Gallons. Heat Exchanger threads are 3/4".
MH Series - Horizontal
A
B
C
D
E
F
G
H
TOR MH-6
Part #
21"
14-1/2"
16"
14-1/8"
11-1/8"
9-1/2"
5"
5"
TOR MH-10
29"
14-1/2"
24"
14-1/8"
11-1/8"
9-1/2"
5"
5"
APPLIANCES
MV Series - Vertical
Part #
A
B
C
D
E
F
Volts
TOR MV-6
14"
17-1/4"
12-5/8
2-1/2"
6-3/4"
10-5/8"
120V
TOR MV-10
16"
17-3/4"
12-5/8"
2-1/2"
6-3/4"
10-5/8"
120V
TOR MV-17
16"
28-1/4"
23-1/8"
2-1/2"
6-3/4"
10-5/8"
120V
TOR MV-20
20"
22-1/4"
16-1/2"
2-1/2"
6-3/4"
10-5/8"
120V
TOR MV-20-240V*
20"
22-1/4"
16-1/2"
2-1/2"
6-3/4"
10-5/8"
240V-3000W
TOR MV-30
20"
30-1/4"
24"
2-1/2"
6-3/4"
10-5/8"
120V
TOR MV-30 60HZ*
20"
30-1/4"
24"
2-1/2"
6-3/4"
10-5/8"
240V-60HZ
*Request Items
Parts:
TOR TPV
TOR AND12
TOR AND18
TOR AND24
Relief valve
Anode for MV6/10
Anode for MV20 & MH10
Anode for MV17/30 & MH17
**Torrid heaters are also available with a stainless steel exterior and dual heat exchangers. Please call for more information.