Beijing Backbone Computer Technology IDRS-IPCAM1-H User manual

IDRS IP Camera IE Client User Manual
IDRS IP CAMERA (OR DVS)
IE Client
User Manual
Beijing Backbone Computer Technology Co.,Ltd
Tel: 86-10-62975811
Fax: 86-10-62979244
www.chinasecuritysystem.com
IDRS IP Camera IE Client User Manual
Content
1. FEATURES ........................................................................................................................................................ 3 2. PRODUCTS SHAPE ......................................................................................................................................... 4 3. IP SEARCH & SET ........................................................................................................................................... 5 4. IP CAMERA(OR DVS) TO IE CONNECTION & OPERATION ....................................................................... 6 4.1 FIRST TIME INSTALLATION WITH PLUG‐IN ............................................................................................................................. 6 4.2 MAIN INTERFACE ........................................................................................................................................................... 8 4.2.1 Operation introduction ................................................................................................................................... 9 4.2.2 Playback interface operation ...................................................................................................................... 10 4.2.3 Log search interface operation .................................................................................................................. 12 4.3 REMOTE SETTING OPERATION ......................................................................................................................................... 12 4.3.1 Configure parameters of server ................................................................................................................. 12 4.3.2 Channel parameters configuration ............................................................................................................ 14 4.3.3 Serial parameters set up............................................................................................................................. 18 4.3.4 Alarm parameters setup .............................................................................................................................. 19 4.3.5 User setup ..................................................................................................................................................... 21 4.3.6 Other functions ............................................................................................................................................. 22 5. SPECIFICATIONS ........................................................................................................................................... 24 2 / 30
IDRS IP Camera IE Client User Manual
1. Features
Camera
1/3" Sony Super HAD CCD
Horizontal resolution 540/480/420 TV Lines
Auto Day/Night Switch
Auto electronic shutter and auto gain control
IR LED: ¢5×36PCS
IR distance: 30m
Video Compression
H.264 compression algorithm with high compression ratio & good image quality
Set-able video quality and bit rate
Support up to D1 (4CIF) resolution
Multi-zone motion detection function
Support Mask function to mask sensitive area
Video signal loss alarm function
Position configurable OSD&LOGO function
Support both variable bit rate and variable frame rate
Support SD card
Network function
Support TCP, UTP, RTP, DHCP, etc
Support ADSL (PPPoE) dialup function
Remote parameters setup
Remote playback, download the recorded files in DVR
Remote record function
Remote upgrade function
Remote control PTZ
Support Internet Explore for network preview
Network voice talk
Related Software
IDRS- NVR Client software
IDRS- NVMS
IE Browser (Web function)
IDRS- PC Based DVRs Server Software
3 / 30
IDRS IP Camera IE Client User Manual
2. Products Shape
---------------------------------------IDRS-IPCAM1--------------------------------------------- IDRS-IPCAM2------------------------------------
----------------------------------------IDRS-IPCAM3--------------------------------------------------------IDRS-IPDOME3-----------------------
----------------------------------------------------------------------------IDRS401D----------------------------------------------------------------------
----------------------------------------------------------IDRS-401A/IDRS-402A/IDRS-404A-------------------------------------------------------
4 / 30
IDRS IP Camera IE Client User Manual
3. IP search & set
In the network camera software packages, there is a "search software SADP of IP Camera" folder,
including SADP software. SADP software is used to identify and configure all the cameras’ IP address
and mask address in the LAN (must be in an open state). SADP software uses unique search activated
equipment technology, when the user does not know or has forgotten network camera's IP address, can
find it via SADP software. This software can be run in Windows2000/XP system, and needed the support
from the operation of Wincap; users need to install software Wincap Package, The packages include
"WinPcap_3_1_beta_3" software.
SADP is not needed to be installed, can be run directly, the software will automatically search IP
cameras in the LAN after running, then displayed the cameras in the table form, as below:
IP address: 123.127.244.165
Initiative
Display the IP address; connect port and
Hardware series number of equipments
searched out
Here you can change the current equipment’s IP address and mask address, then input the one you
want, after that, click
.
Note:
The new IP address will take effect after restarting this equipment.
5 / 30
IDRS IP Camera IE Client User Manual
4. IP Camera(or DVS) to IE connection &
operation
4.1 First time installation with Plug-in
When you want to connect to the network camera, only need to input the network camera's IP address in
the IE Address bar, then click the "link" or the "Enter" button on the keyboard.
If it is your first time to access to the network cameras through the IE browser, the operating system will
prompt you to install a plug-in, as the following picture: (Take Windows XP-as the example, basically
similar to other operating systems.)
Click
to install this Active X. You need to wait different time according to different net
speed. (Usually between 20-120 sec)
After installation, the page will automatically enter into the user interface to verify the users,
Inputs the corresponding connects port, the user name and password, and selects the suitable stream
type (Master Stream, Sub Stream. See more information: 4.3.1), after all this, click OK, and then enter
the main browser interface, as below:
Default admin name:Admin
Default admin password:12345
Default connect port:8000
6 / 30
IDRS IP Camera IE Client User Manual
Note:
If no window displayed or no respond after clicking on the installation button, check whether there is
third-party software (such as firewalls, YAHOO assistant, 3721, and other software) to restrict the
installation, if there are restrictions from third-party software, please remove the restrictions, or
temporarily close the third-party software or firewall.
In addition, please make the following adjustments in the "IE security settings" of "Internet Options":
1)
Click the [customer level], then click [ok].As below:
2) Access to security settings of pages, use the settings circled in the bellowed picture. (This picture
shows Windows XP-option, Windows2000 similar to this).
7 / 30
IDRS IP Camera IE Client User Manual
4.2 Main interface
The logon interface will be displayed automatically after installation of plug-in. Input related user name
and passport, as below:
Notice:
Initiative User name: admin
Passport: 12345
8 / 30
IDRS IP Camera IE Client User Manual
4.2.1 Operation introduction
Device list,
double-click
: Connect
to image;
double-click
again:
disconnect
to image
Connect/disconnect image
Snapshot
Manual record
Talkback (available to talk to web servant positively)
PTZ control button: control pan / tilt/zoom/aperture, as
well as position of presetting
Notice: before control, preset control protocol/address
code/bit rate etc.
9 / 30
IDRS IP Camera IE Client User Manual
Adjust
saturation,
grayscale,
contrast,
brightness.
Real-timely adjust eavesdropping volume. Restore default
by pressing lower-right corner. Mouse-hovering appears
hint
4.2.2 Playback interface operation
Press
into search interface, like picture:
Play button provides play, stop, slow play, rapid play and
frame play. Mouse-hovering appears hint
During remote playback, support snapshot, instant store, adjust
playback volume. Press download button and wholly download video data selected.
10 / 30
IDRS IP Camera IE Client User Manual
Search criteria: time search or video type
search
Start to search
Search result list displays all related video
data, select and press “playback”
11 / 30
IDRS IP Camera IE Client User Manual
4.2.3 Log search interface operation
Select related search type on the right, press “search” button and display all logs needed. Press
button on the lower right corner and move logs to local computer.
4.3 Remote setting operation
4.3.1 Configure parameters of server
Press “Server parameters” item (like below picture) involves Server Configuration Information, Network
Configuration Information and Server Version Information.
12 / 30
IDRS IP Camera IE Client User Manual
Server Configuration Information:
Server name: max.32 characters or 16 Chinese characters.
Device number: 1.5 or more new version number is max. 255; 1.4 version number is max. 100.
Loop record: when HD space is full, press “yes” with continuing record and covering old file; press “no”
with stopping record.
Channel quantity, HD quantity, alarm-in quantity, alarm-out quantity, server type and
serial-number of server can not be revised.
IP address & port number & mask code: server’s fixed IP address, port number and mask code.
Default code of port: 8000.
Gateway address: when client visits server with cross-gateway, gateway IP must be put in.
13 / 30
IDRS IP Camera IE Client User Manual
Manage host IP & port number: IP address and port number of PC host of receiving alarm signal.
HTTP port number: used when visiting server by web pattern.
Physical address of server: PPPoE address can not be revised.
Server version information: main-control version, HD version, encode version and front panel version
can not be revised.
Setting finishes and press “save”. Some parameters require restart server for taking effect, press
“restart” button.
4.3.2 Channel parameters configuration
In remote configuration column, select “channel parameters”, like below picture
14 / 30
IDRS IP Camera IE Client User Manual
Main stream: main encode mode for device; record parameter for DVR
Sub stream: mainly applied for network transmission, suitable in unfavorable network.
Event parameter:when event trigger happens (e.g. Motion detection alarm, mask alarm, signal quantity
alarm), record parameter switches from timing record parameter to event compression parameter; when
event is over, event compression parameter switches back to timing record parameter. Event parameter
is optional.
Bit rate upper limit: select a parameter for limiting compression stream. 32K, 48K, 64K, 80K, 96K,
128K, 160K, 192K, 224K, 256K, 320K, 384K, 448K, 512K, 640K, 768K, 896K, 1M, 1.25M, 1.5M, 1.75M,
2M, customize
Video frame rate: full frame rate (PAL25f/s, NTSC30f/s), 20, 16, 12, 10, 8, 6, 4, 2, 1, 1/2, 1/4, 1/8, 1/16.
(Notice: 15, 18, 22 applies in dedicated servers)
Image quality: 6 gears optional ()
Resolution: default is CIF, others options include QCIF, 2CIF, DCIF, 4CIF. Sub stream options include
QCI and CIF.
Bit rate type: variable bit rate and fixed bit rate is optional
Set timing record:
Select “record plan”, also can set record time, and prerecord time and record delay. Press “setup”, enter
timing record plan interface, as below picture
15 / 30
IDRS IP Camera IE Client User Manual
Select timing record mode, set relevant period. If select 24-hours record, only can set record type.
Setting finishes, press “OK” for saving then exits configuration interface. When configuration is
unnecessary
Note: If set up the record method mobile detection or alarm video, and we should set up the mobile
detection and alarm deployment.
Pre-recorded time: the video took place before the alarm time, the options do not have to deal with, 5
seconds (default), 10 seconds, 15 seconds, 20 seconds, 25 seconds, 30 seconds, without restriction.
Delay Video: Video alarm occurs when the number of recorded time, there are options for 5 seconds, 10
seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes.
Mobile detection, video loss, blocks the view of the alarm, video cover:
Select the required set of options, you can set the region, deployment time and the way linked. Click "set
the region," come into the interface, as the following chart:
Display area: select "display area", will be able to view the original settings of the region
Regional settings: select "set up regional", holding down the【Ctrl】 keyboard keys, use the mouse to
set up regional location, at the same time hold down the left mouse button and drag the mouse, you can
16 / 30
IDRS IP Camera IE Client User Manual
draw a box in the region, after a good painting Release the left mouse button, they set up a regional.
Mobile can be set up to detect a number of regions, video can be set up to cover 4 regions, can only
block one area.
Choose Sensitivity: mobile detection can choose to 7, respectively, on behalf of the slider left to right:
"closed" and 0-5 sensitivity of seven options, the lowest sensitivity of 0, 5 the highest. The police can
choose to block 4, respectively, on behalf of the slider left to right: closed lower general and high
Click the "deployment time"; come into the set-up time interface, as the following chart:
Deployed in a specific period of time, an effective way to deal with the alarm.
Click the "linkage"; come into the Linkage interface settings, as the following chart:
17 / 30
IDRS IP Camera IE Client User Manual
Select video channel trigger: the trigger-channel video channel can be a can also be a number.
Set up to deal with the alarm: the choice of channel output linkage approach, you can select one or
more of the warning means.
Finished the setup, click "OK."Save the set up and come out the interface, not need to save click the
“cancel”, return to the control parameters setup interface
OSD attributes: can choose whether or not to display OSD, show the location, it shows the week, OSD
attributes (state show that: do not blink opaque, not transparent and blinking, blinking and transparency,
opaque blink, do not show), OSD type (Display format: XXXX - XX-XX (date), XX-XX-XXXXX (on
Japan-year), XXXX in XX on XX day, XX, XX on XXXX in, XX-XX-XXXX (in the sun), XX, XX on XXXX ).
Set channel name attribute: You can choose whether or not to display name of the channel as well as
the location of the show.
Superposition characters: can choose characters superimposed images, stacking up to 4 lines of 22
characters per line (44 characters).
Finished setting Parameter, click "OK." If the parameter can take effect only by restart click the "Restart"
button.
(Note: regular video, mobile detection, video loss, block, block the view of the alarm settings in the
name of the channel information and can not be copied to other channels)
4.3.3 Serial parameters set up
Choose the "serial parameters" in the remote set up, as the following chart
The interface can set up the RS232 and RS485‘s relevant parameters
18 / 30
IDRS IP Camera IE Client User Manual
Finished the setup of Parameter, click "OK." If the parameters can take effect only by restart, please
restart.
4.3.4 Alarm parameters setup
Choose the “alarm parameters” in the following chart; we can set up the alarm quantity parameters and
abnormal parameters in the interface.
19 / 30
IDRS IP Camera IE Client User Manual
Alarm input process:
Choose the process”, the police enter click "deployment time"; come into the report to the police
deployed in time as the following chart:
20 / 30
IDRS IP Camera IE Client User Manual
After setup the deployment time, click "OK" button to save and come out the configuration interface. If
not need save the set up click the "Cancel" button and return to the police parameter configuration
interface
Click the alarm input “linkage", come into the alarm input “linkage" interface, as the following chart:
After set up the deployment time, click "OK" button to save and come out the interface. If not need to
save ,click the “cancel” and return to the alarm parameters interface.
Unusual Information setup:
Unusual configuration information including full hard disk, hard disk errors, broken lines, IP address
conflicts, illegal access, input / output system does not match the video, and so on, also can choose the
alarming process method.
Finished the setup of Parameter, click "OK." If the parameters can take effect only by
restart ,please restart .
4.3.5 User setup
Choose the “user purview” in the remote setup, as the following chart::
21 / 30
IDRS IP Camera IE Client User Manual
We can mange the server in the interface. Including user names, passwords, we can added and the
abolition of authority by check on the” authorization”.
When users select the user's permission to view. If the user already exists, right-node when the user
pop-up menu, select "modify" the user to manage. Select the "delete" to delete the user. Super users
can not be deleted. If the user does not exist, choose "modify" the user add the user, select "Cancel" and
set out the setup.
Finished the setup of Parameter, click "OK." If the parameters can take effect only by restart ,please
restart .
Note: If you set up IP address binding, only the binding IP addressee’s PC can access the equipment,
not recommend to use.
4.3.6 Other functions
Choose the “other functions” in the remote setup. As the following chart:
22 / 30
IDRS IP Camera IE Client User Manual
You can remote upgrade the server and format the hard disk in the interface.
Select the "remote upgrade", click "Browse", choose the upgraded files. Click the "upgrade" to start
upgrading. Finished the upgrade, suggesting "success to upgrade the server and please restart it.”
Select "hard disk format", choose the hard disk need to operate(or a full hard drive), click the "format",
suggestion” formatting the hard disk ” finished the format, suggesting that " success formatting the
hard disk "
Notice :finished the remote upgrade and format the hard disk ,need to restart the device ,during
the course ,can’t be do other operation.
23 / 30
IDRS IP Camera IE Client User Manual
5. Specifications
Models
IDRS-IPCAM1-Q
IDRS-IPCAM1-H
Image Sensor
1/3″ SONY Super HAD CCD
Horizontal Resolution
540TVL
Efficiency Resolution
PAL: 704×576, NTSC:704×480(H ×V)
Electric Shutter
PAL=1/50 -1/100,000 s, NTSC=1/60 -1/100,000 s
Min. Illumination
0 Lux
S/N Ratio
> 48dB(AGC off)
Gamma
0.45
Lens Connector
CS
Video Output
1Channel, BNC(1.0Vp-p, 75Ω)
Back Compensation
on
Video Compression
H.264
Storage Medium
SD Card
Compression Resolution
QCIF/CIF/2CIF/DCIF/4CIF
Video Frame Rate
PAL: 1/16—25f/s, per channel NTSC: 1/16—30f/s per channel
Stream Type
Video &audio mixed stream or video stream
Video Bit Rate
32Kbps~2Mbps (Self-define)
Audio Output
1channel, RCA jack
Audio Input
1channel , RCA jack(2Vp-p, 1kΩ)
Communication Interface
1 RJ45 10M/100M UTP network interface,1 RJ45 RS-232 interface
Alarm Input
1
Alarm Output
1
Power Supply
DC 12V
Operating Temperature
-10˚C--+55˚C
Operating Humidity
10%--90%
Dimension
133×61×62mm(L × W × H)
Weight
0.42kg (N.W),0.49kg(G.W)
480TVL
24 / 30
IDRS-IPCAM1-D
420TVL
PAL:500×582, NTSC:510×492(H ×V)
IDRS IP Camera IE Client User Manual
Models
IDRS-IPCAM2-Q
Image Sensor
Horizontal Resolution
Pixel
IDRS-IPCAM2-H
IDRS-IPCAM2-D
1/3″SONY Super HAD CCD
540TVL
480TVL
PAL:752×582, NTSC:768×494(H ×V)
420TVL
PAL: 500×582
NTSC: 510×492(H ×V)
Electrical Shutter
PAL=1/50 -1/100,000 s, NTSC=1/60 -1/100,000 s
Min. Illumination
0 Lux
S/N Ratio
> 48dB(AGC off)
Gamma
0.45
Lens
12mm(6mm, 8mm,)
Back Compensation
on
IR LED
850nm
IR Distance
30m
IR Status
Light below 10 Lux, CDS automatically open
Video Compression
H.264
Storage Medium
SD Card
Compression Resolution
QCIF/CIF/2CIF/DCIF/4CIF
Video Output
1channel,BNC(1.0Vp-p,75Ω)
Video Frame Rate
PAL: 1/16—25f/s per channel ,NTSC: 1/16—30f/s per channel
Stream Type
Video &audio mixed stream or video stream
Video Bit Rate
32Kbps~2Mbps (Self-define)
Audio Output
1channel, RCA
Audio Input
1channel ,RCA(2Vp-p,1kΩ)
Communication Interface
1 RJ45 10M/100M UTP network interface
Alarm Input
1channel
Alarm Output
1channel
Power Supply
DC 12V
Operating Temperature
-10˚C--+55˚C
Relative Humidity
10%--90%
Dimension
200×83 ×83mm(L × W × H)
Weight
0.9kg (N.W)
25 / 30
IDRS IP Camera IE Client User Manual
Model
IDRS-IPCAM3-Q
IDRS-IPCAM3-H
Image Sensor
1/3″SONY SUPERHAD CCD
Resolution
540TVL
Pixel
PAL:752×582, NTSC:768×494(H ×V)
480TVL
IDRS-IPCAM3-D
420TVL
PAL: 500×582
NTSC: 510×492(H ×V)
Electric Shutter
PAL=1/50 -1/100,000 s, NTSC=1/60 -1/100,000 s
Min. Illumination
0 Lux
S/N Ratio
> 48dB(AGC off)
Gamma
0.45
Lens
12mm(4mm, 6mm, 8mm, 16mm)
Back Compensation
on
IR LED
850nm
IR Distance
30m
IR Status
Light below 10 Lux, CDS automatically open
Video Compression
H.264
Storage Medium
SD Card
Compression Resolution
QCIF/CIF/2CIF/DCIF/4CIF
Video Frame Rate
PAL: 1/16—25f/s, NTSC: 1/16—30f/s,
Stream Type
Video &audio mixed stream or video stream
Video Bit Rate
32Kbps~2Mbps (Self-define)
Communication Interface
1 RJ45 10M/100M UTP network interface
Alarm Input
1channel
Alarm Output
1channel
Power Supply
DC 12V
Operating Temperature
-10˚C--+55˚C
Relative Humidity
10%--90%
Dimension
226×83 ×80mm(L×W×H)
Weight
1.2kg
Protection Grade
IP66
26 / 30
IDRS IP Camera IE Client User Manual
Models
IDRS-IPDOME3-H
IDRS-IPDOME3-X
IDRS-IPDOME3-W
Camera
Image Sensor
1/4″SONY CCD Image Sensor
Effective Pixels
PAL:752×582 NTSC:768 x 494(H x v)
Horizontal
480TV lines
480TV lines
540TV lines
Manual/ Auto (IR Cut
Manual/ Auto (IR Cut
Removable Filter)
Removable Filter)
0.002Lux
Color:0.4 Lux
Resolution
Day/Nigh Function
Manual/ Auto
Min. Illumination
0.01Lux
B/W:0.001 Lux
Digital Slow Shutter: 0.006 Lux
Wide
Dymanic
No
Range
No
S/N Ratio
>50dB
Electric Shutter
PAL=1/50 -1/100,000 s, NTSC=1/60 -1/100,000 s
Lens
f=4-88mm
f =4.1~73.8mm
Zoom
Optical zoom 22X, Digital
Optical zoom 18X, Digital
zoom 10X
zoom 12X
Speed Dome
Pan Travel
360° continuous
Tilt Travel
90°
Pan/Tilt Speed
0.5°~300° per second
Pan/Tilt Accuracy
± 0.5°
Preset Positions
128
Preset Tours
6
Address Range
0~255
Protocol
Pelco-D, Pelco-P etc
Baud Rate
1200bps, 2400bps,4800bps,9600bps
Long-focus
Speed-limited
Built-in Memory To
Store The Setting
Home Position
With
With
The first preset position
IP Module
Video Compression
H.264
Storage Medium
SD card
Compression
Resolution
QCIF/CIF/2CIF/DCIF/4CIF Compression
Video Output
1 channel, BNC (1.0Vp-p, 75Ω)
Video Frame Rate
PAL : 1/16--25 fps, NTSC : 1/16--30 fps, adjustable
Stream Type
Video & audio mixed stream or video stream
Video Frame Rate
Communication
Interface
With
32Kbps~2Mbps (Self-define)
1 RJ45 10M / 100M UTP network interface
27 / 30
f=3.3~99mm
Optical zoom 30X, Digital
zoom 8X
IDRS IP Camera IE Client User Manual
General
Operating
Temperature
-30~65˚C
Relative Humidity
0 to 95% RH (Non condensing)
Power Supply
AC24V
Power
Consumption
60Hz/50Hz
70W
Protection Grade
IP66
Weight
3.6kg
Dimension
200x285mm
28 / 30
IDRS IP Camera IE Client User Manual
Model
IDRS401D
Video Compression
H.264
Compression Resolution D1,DCIF,2CIF,CIF,QCIF
Video Input
Video Signal
Frame Rate
1
BNC (Electrical Level: 1.0Vp-p, Resistance: 75Ω)
NTSC/ PAL System Auto Recognition
PAL: 1/16fps-25 fps per channel
NTSC: 1/16fps-30fps per channel
Stream Type
Video and audio Mixed stream or Video Stream
Video Bit Rate
32Kbps~2Mbps (Self-define)
Audio Input
1
Audio Input Signal
BNC (Linear Electrical Level , Resistance:1000Ω), SNR > 83DB
Audio Output
1 Channel, BNC (Linear Electrical Level)
Audio Compression
Ogg Vorbis
Audio Bit Rate
16Kbps
Voice Audio Input (MIC)
1 Input , RCA jack
Communication
1 RJ45 10M/100M Self-adaptable Ethernet Interface, 1 RS232 interface, 1 RS 485 interface for
Interface
PTZ
Alarm Input
4
Alarm Output
2
Power Supply
DC 12V
Power Consumption
Less than 4.5W
Operating Temperature
-10˚C-- + 50˚C
Relative Humidity
10%-90%
Dimensions(L×W×H)
100×68×41mm
Weight
0.3 Kg
29 / 30
IDRS IP Camera IE Client User Manual
Model
IDRS401A
Video Compression
H.264
IDRS402A
IDRS404A
2
4
Compression Resolution CIF,QCIF
Video Input
Video Signal
Frame Rate
1
BNC (Electrical Level: 1.0Vp-p, Resistance: 75Ω)
NTSC/ PAL System Auto Recognition
PAL: 1/16fps-25 fps per channel
NTSC: 1/16fps-30fps per channel
Stream Type
Video and audio Mixed stream or Video Stream
Video Bit Rate
32Kbps~2Mbps (Self-define)
Audio Input
1
Audio Input Signal
BNC (Linear Electrical Level , Resistance:1000Ω), SNR > 83DB
Audio Output
1 Channel, BNC (Linear Electrical Level)
Audio Compression
Ogg Vorbis
Audio Bit Rate
16Kbps
Voice Audio Input (MIC)
1 Input , RCA jack
Communication
1 RJ45 10M/100M Self-adaptable Ethernet Interface, 1 RS232 interface, 1 RS 485 interface for
Interface
PTZ
Alarm Input
4
Alarm Output
2
Power Supply
DC 12V
Power Consumption
Less than 4.5W
Operating Temperature
-10˚C-- + 50˚C
Relative Humidity
10%-90%
Dimensions(L×W×H)
123×198×39mm
Weight
1.5 Kg
2
30 / 30
4