Converters.TV 15353 Operation Manual

HDBaseT-Lite HDMI over CAT5e/6/7

Transmitter and Receiver with IR and high

Bandwidth

- # 15353

Operation Manual

Introduction

Applications

The HDMI Extender over single CAT5e/6 incorporating IR signal transfer allows for a more efficient system setup and is easy to install.

Uncompressed video and audio can be transmitted to distances of up to 60 meters

(1080p) and supports High Definition Audio and 3D signals.

Designed with HDBaseT technology for greater flexibility in custom installations with full

HDMI and control signal transfer over a single CAT5e/6 cable.

3

4

1

2

5

Residential entertainment sharing and control

University lecture hall display and control

Retail sales display and control

Meeting room presentation and control

Commercial advertising display and control

System

Requirements

HDMI source equipment such as DVD/Blu-ray player/PC and TV/ monitor/projector with HDMI input and HDMI to CAT5e/6 cables.

Features

•

•

•

•

•

•

•

HDMI with 3D, 4K×2K support, HDCP and DVI compliant

Supports HDMI (including HDCP) over a single CAT5e/6 up to 60m

Full HD resolution support (1080p@60Hz/36-bit), 3D, 4Kx2K and PC resolution support (VGA to WUXGA) over CAT5e/6 cable

HDMI input up to 15m with 8-bit resolution or 10 m with 12-bit resolution

HDMI output up to 15 m with 8/12-bit resolution

Supports HDCP repeater and CEC bypass

Supports High Definition LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-

HD Master Audio transmission

Compact size with stylish design •

Note: Displaying HDMI 4k x 2k resolution require the standard 4kx2k HDMI cable and display in order for proper image displaying.

Operation Transmitter Front and Rear Panels

Controls and

Functions

1. IR1 OUT/Blaster

Connect to the supplied IR Blaster for IR signal transmission to the source equipment from IR1 IN's IR signal. Place the IR Blaster in direct line-of-sight of the equipment to be controlled.

2. HDMI IN

Connect to the HDMI input source devices such as a DVD player or a Set-top Box with HDMI cable or DVI to HDMI cable.

3 IR2 IN/Extender

Connect to the supplied IR Extender cable for IR signal reception and transmission to

IR2 OUT. Ensure that remote being used is within the direct line-of-sight of the IR

Extender.

4 DC 5V

Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.

5 CAT5e/6 OUT

Connect to the Receiver unit with a single CAT5e/6 cable for transmission of all data signals. The yellow LED will illuminate when both Transmitter and Receiver are connected together with power supply. The green LED will illuminate when the power supply is connected to the device.

Receiver Front and Rear Panels

1 DC 5V

Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.

2 CAT5e/6 IN

Connect to theTransmitter unit with a single CAT5e/6 cable for transmission of all data signals. The yellow LED will illuminate when both Transmitter and Receiver are connected together with power supply. The green LED will illuminate when the power supply is connected to the device.

3 IR1 IN/Extender

Connect to the supplied IR Extender cable for IR signal reception and transmission to

IR1 OUT. Ensure that remote being used is within the direct line-of-sight of the IR

Extender.

4 HDMI OUT

Connect to a HDMI equipped TV/monitor for display of the HDMI input source signal.

5 IR2 OUT/Blaster

Connect to the supplied IR Blaster for IR signal transmission to the display side from IR2

IN's IR signal. Place the IR Blaster in direct line-of-sight of the equipment to be controlled.

Transmitter and Receiver Top Panels

IR Pin Assignment

Specifications

Video Bandwidth

Transmitter

Inputs

Outputs

Receiver

Inputs

Outputs

ESD Protection

Power Supply

Dimensions

340 MHz/10.2 Gbps

1×HDMI, 1×IR Extender

1×RJ45, 1×IR Blaster

1×RJ45, 1×IR Extender

1×HDMI, 1×IR Blaster

Human Body Model:

±8kV (air-gap discharge)

±4kV (contact discharge)

2×5 V/2.6 A DC (US/EU standards, CE/

FCC/UL certified)

55 mm (W)×75.5 mm(D)×22.5 mm (H)/Jacks

Excluded

55 mm (W)×82.2 mm(D)×22.5 mm (H)/Jacks

Weight

Chassis Material

Included

60 g (TX), 66 g (RX)

Plastic

Silkscreen Color White

Operating Temperature 0 ˚C~40 ˚C/ 32 ˚F~104 ˚F

Storage Temperature

Relative Humidity

Power Consumption

−20 ˚C~60 ˚C/−4 ˚F~140 ˚F

20~90 % RH (non-condensing)

3 W (TX), 5.5 W (RX)

Connections