Samsung MM-C6 Instruction manual

MICRO COMPONENT SYSTEM
MP3-CD/CD-R/RW PLAYBACK
MM-C6
Instruction Manual
Downloaded From Disc-Player.com Samsung Manuals
Safety Warnings
Thank you for buying this
SAMSUNG micro-component system.
Contents
Please take time to read these instructions.
They will allow you to operate your
system with ease and take full advantage
of its features.
GB
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product.
Use of controls adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION
WHEN OPEN AND INTER LOCKS
DEFEATED, AVOID EXPOSURE TO BEAM.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
This symbol indicates that dangerous voltage which can cause electric shock is
present inside this unit.
This symbol alerts you to important operating and maintenance instructions
accompanying the unit.
SAFETY WARNINGS .................................................................................................................................................................................. 2
INSTALLING YOUR MICRO-COMPONENT SYSTEM
Front Panel View ........................................................................................................................................................................................4
Remote Control ..........................................................................................................................................................................................5
Rear Panel View ........................................................................................................................................................................................6
Where to Install your Micro-Component System........................................................................................................................................7
Connecting your System to the Power Supply ..........................................................................................................................................7
Inserting Remote Control Batteries ............................................................................................................................................................7
Connecting to an External Source ............................................................................................................................................................8
Speaker Connection ..................................................................................................................................................................................8
Connecting the AM (MW)/LW Aerial ..........................................................................................................................................................9
Connecting the FM Aerial ..........................................................................................................................................................................9
Connecting the SW Aerial(option) ..............................................................................................................................................................9
Demo/Dimmer Function............................................................................................................................................................................10
Setting the Clock ......................................................................................................................................................................................10
CD-PLAYER
To replay the CD/MP3-CD........................................................................................................................................................................10
Regarding the playback of CD-R/RW ......................................................................................................................................................11
Selecting a Track ......................................................................................................................................................................................11
Selecting the MP3-CD album and track ..................................................................................................................................................11
Shuffle Play Function................................................................................................................................................................................11
Searching for a Specific Music Passage on a CD ..................................................................................................................................12
Function to skip through 10 tracks at a time ..........................................................................................................................................12
Last Memory Function ............................................................................................................................................................................12
Repeating One or All Tracks on the Compact Discs................................................................................................................................13
Repeat A
B Function ....................................................................................................................................................................13
Programming the Order of Playback ................................................................................................................................................13
Checking or Changing Programmed Tracks ..........................................................................................................................................14
TUNER
Searching for and Storing the Radio Stations..........................................................................................................................................14
Selecting a Stored Station........................................................................................................................................................................15
Improving Radio Reception ......................................................................................................................................................................15
TAPE DECK
Listening to a Cassette ............................................................................................................................................................................16
Recording a Compact Disc ......................................................................................................................................................................16
Recording a Radio Program ....................................................................................................................................................................16
Selecting the Cassette Playback Mode....................................................................................................................................................17
Tape Counter............................................................................................................................................................................................17
OTHER FUNCTIONS
Timer Function ........................................................................................................................................................................................18
Cancelling the Timer ................................................................................................................................................................................18
Power Sound Function ........................................................................................................................................................................19
EQ/S.BASS (Super Bass) Function ..........................................................................................................................................................19
Sleep Timer ............................................................................................................................................................................................20
MUTE Function......................................................................................................................................................................................20
Connecting Headphones ...................................................................................................................................................20
Microphone Function(option)...............................................................................................................................................20
RECOMMENDATIONS FOR USE
Safety Precautions.................................................................................................................................................................................. 21
Cleaning your Micro-Component System............................................................................................................................................... 21
Precautions When Using Compact Discs ................................................................................................................................................22
Precautions When Using Audio Cassette ................................................................................................................................................22
Before Contacting the After-Sales Service ..............................................................................................................................................22
Technical Specifications ..........................................................................................................................................................................23
Symbols
Press
2
Downloaded From Disc-Player.com Samsung Manuals
Push
Important
Note
3
GB
Front Panel View
Remote Control
1
25
24
17
16
15
14
13
1
2
3
4
5
6
7
12
8
9
10
1.
STANDBY/ON
2.
TAPE PLAY
3.
DEMO/DIMMER
4.
11.
PUSH EJECT
(CASSETTE DOOR OPEN/CLOSE)
TUNER / BAND
VOLUME CONTROL
CD SYNC./REC/PAUSE
5.
AUX
14.
CD OR TAPE REPEAT A
6.
MP3-CD PLAY/PAUSE
15.
EQ/SUPER BASS
7.
HEADPHONE JACK
16.
POWER SOUND
8.
SKIP OR SEARCH REWIND
17.
PUSH EJECT(CD DOOR OPEN/CLOSE)
STOP/TUNING MODE
10.
SKIP OR SEARCH FORWARD
23
3
22
4
5
21
20
6
7
19
18
8
17
9
10
16
15
11
12
14
13
11
12.
13.
9.
2
4
Downloaded From Disc-Player.com Samsung Manuals
B
1.
PROGRAM / SET
14.
TAPE FAST-FORWARD
2.
STANDBY/ON
15.
TUNING UP OR DOWN SEARCH/
3.
TUNER/BAND
4.
AUX
16.
TUNING MODE / CD+10
5.
SLEEP
17.
CD PLAY/PAUSE
6.
REVERSE MODE
18.
SHUFFLE PLAY
7.
CD SKIP OR SEARCH
19.
COUNTER RESET
8.
CD STOP
20.
TAPE SPEED
9.
CD REPEAT
21.
REPEAT A-B /FM MONO/STEREO
10. VOLUME CONTROL
22.
TIMER ON/OFF
11. TAPE REWIND
23.
MUTE
12. TAPE STOP
24.
EQ/SUPER BASS
13. TAPE PLAY
25.
TIMER/CLOCK
ALBUM SELECT
5
Where to Install Your
Micro-Component System
Rear Panel View
Inserting Remote Control Batteries
GB
GB
To take full advantage of your new micro-component system, follow these installation instructions before connecting the unit.
5
1
2
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 6 inches (15 cm) on the
sides and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the compact disc
compartment easily.
Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.
3
Insert or replace remote control batteries when you:
Purchase the micro-component system
Find that the remote control is no longer operating correctly
When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.
1
Place your thumb on the position marked
on the battery
compartment cover (rear of the remote control) and push the cover in
the direction of the arrow.
2
Insert two AAA, LR03 or equivalent batteries, taking care to respect
the polarities:
+ on the battery against + in the battery compartment
– on the battery against – in the battery compartment
3
Replace the cover by sliding it back until it clicks into position.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
6
4
7
Connecting your System to the
Power Supply
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check
the voltage setting (OPTIONAL). If the voltage of the socket does
not correspond to the setting on the rear of the unit, you may
seriously damage your system.
1
Check the position of the Voltage selector on the rear of the system
(OPTIONAL).
2
3
Plug the main lead into an appropriate socket.
1. SW Aerial Connector Terminal (option)
2. FM Aerial Connector Terminal
3. AM Aerial Connector Terminals
Press the STANDBY/ON button to switch your micro-component system
on.
4. Voltage selector (option)
5. Microphone Jack (option)
6. AUX-Input
7. Loudspeakers Connector Terminals
6
Downloaded From Disc-Player.com Samsung Manuals
7
Connecting to an External Source
Speaker Connection
Connecting the AM (MW)/LW Aerial
GB
GB
The auxiliary input can be used to take advantage of the
sound quality of your micro-component system when listening
to other sources.
Examples: A television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect to the external source, the source must have an
audio output. In addition, you need an RCA connection cable.
1
Set the system to standby mode and disconnect it and the external
source from the main socket.
2
Connect the audio cable to the rear of the micro-component system.
Connect the...
To the connector marked...
Red jack
White jack
R (right)
L (left)
The loudspeaker connector terminals are located on the rear
of the system (red and black tabs).
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM aerial connector terminals are located on the rear of the system and are marked AM .
There are four terminals on the system:
Two for the left speaker (marked L)
Two for the right speaker (marked R)
To avoid noise interference, check that the loudspeaker wires do not run close to the
aerial wires.
Always keep them at least 2 inches (5 cm) away.
To achieve the correct sound quality, connect the:
Red wire to the + terminals
Black wire to the - terminals
(Right Speaker)
(Left Speaker)
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the main socket and press Standby/On
(
) to switch it on.
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
5
6
Switch the external source on.
6
4
Adjust the volume and balance as required:
Volume
Equalizer
Connecting the FM Aerial
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 14 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation of
the speaker.
Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the
speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.
6
6
6
3
Connecting the SW Aerial (option)
4
How to connect a SW TYPE aerial .
Spread the SW aerial out and attach the ends to a wall,in the
position providing the best reception.
If reception is poor (e.g.distance from transmitter too great,walls
blocking the radio waves ,etc),install an outdoor aerial.
MIC
8
Downloaded From Disc-Player.com Samsung Manuals
Regarding the playback of CD-R/RW
Demo/Dimmer Function
GB
All functions available on the system can be viewed on the
display and the display's brightness can be switched
between "on" and "off".
1
In the case of an original CD-R(Recordable) recorded in
audio CD format, CD-RW(Rewritable) and editing by the
1
Press the DEMO/DIMMER button.
Result: All functions available on the system appear on the front
panel display.
2
user, playback is processed on the respective
completed status. (The player may not be played back
2
Press the DEMO/DIMMER button again.
Result: The Dimmer function is selected and the display darkens.
3
Press the DEMO/DIMMER button once again to brighten the front
panel display.
A display brightness control can only be performed while the
system power is on.
The album and track of the MP3-CD desired to listen may be
selected on stopping or during playbacks.
1
You can select the album by pressing TUNING/ALBUM button
on the remote control.
2
To move the album, press the
according to the characteristics of the CD or recorded
4,6
3,5,7
status.)
Each of these are explained in detail in this guide. Please refer
to the relevant section.
Selecting the MP3-CD album and
track
4,6
The CD-RW is comparably less reflexive than CD which
Result: ALBUM is displayed.
causes more time delay to read.
or
button.
Album Movement
Track Movement
To replay the CD/MP3-CD
This unit has been designed to playback the CDs: Audio CD,
CD Text, CD-R, CD-RW and MP3-CD.
To move the track .
If the
,
button is pressed .
Result: TRACK is displayed and the track number is moved.
Selecting a Track
Continued use of irregular shape CDs (heart-shape, octagonal,
etc.) can damage the unit.
Select the CD function by pressing MP3-CD(
3
Place your disc in the compartment, with the label on the disc facing
upwards.
1
4
Setting the Clock
5
our system is equipped with a clock which allows you to turn
your system on and off automatically.
You should set the clock:
When you first purchase the micro-component system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
2
Switch the system on by pressing Standby/On (
)
Press PROGRAM /SET.
Result: The hour flashes.
4
To...
6
7
) button.
2
To start playback at the beginning of the...
Press the PUSH EJECT ( ) button.
Result: The compartment opens.
) button
Press the MP3-CD(
) button.
Your CD Player will take a few moments to scan through all
the tracks recorded on a particular MP3-CD
The English name of the song may be indicated on the display
only if directly downloaded from the PC or if the purchased
MP3-CD is sorted according to titles(directory).
(Other languages besides English may not be indicated.)
The English name of the track may not be indicated depending on the characteristics of the MP3-CD.
To stop playback temporarily, press the MP3-CD (
Press the STOP (
Press...
2,4
Increase the hours ..............................................
When the correct hour is displayed, press PROGRAM /SET.
Result: The minutes flash.
6
To...
once
Previous track
twice
or
the
appropriate number
of times.
Shuffle Play Function
You can listen to the tracks on a compact disc in a different
order each time, as the various tracks will be selected automatically in a random sequence.
1
Press the SHUFFLE button.
If this button is pressed when the CD(SHUFFLE)or MP3-CD(RANDOM)
is being played back or stopped, any track recorded in the CD may be
selected to playback again..
2
When playing tracks in a random order, you can:
Move on to the next track (selected at random) by pressing
/
Search quickly for a specific point in the current track by pressing and
holding down
/
more than one second.
3
When you have finished the random playback, press
SHUFFLE button again.
) button when you have finished.
Decrease the hours ..............................................
5
once
Current track
1,2
) button.
) again to continue playing the disc.
2
Press...
Next track
Track of your choice
Close the compartment by pressing the PUSH EJECT (
again until it clicks into place.
Press MP3-CD (
Press TIMER /CLOCK twice.
Result: CLOCK is displayed.
3
You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
1
2
Press...
Decrease the minutes ....................................
1,3
Increase the minutes ..........................................
7
When the correct time is displayed, press PROGRAM /SET.
Result: The clock starts and is displayed, even when the system is in
standby mode.
3
1, 5, 6
You can display the time, even when you are using another
function, by pressing TIMER /CLOCK once.
10
Downloaded From Disc-Player.com Samsung Manuals
or press the
Repeat and CD Synchro function are not available in Shuffle playing
mode.
2
7
2
GB
GB
Function to skip through 10
tracks at a time
What is MP3?
MP3 means MPEG1 Layer 3, the global standard for audio
signal compression technology. It uses digital compression
technology to compress original sound data by up to 12 times
without sound quality degradation.
File Compatibility
The unit will playback files created in MP3 format
(Mpeg1.Layer3) with *.mp3 as their extension.
Files created in MP2 format (Mpeg1.Layer2) with
*.mp2 as their extension can also be played back.
How many MP3 files can a CD-R or CD-RW disc record?
Press the +10 button briefly while playing back a
CD. The track 10 tracks after the current one will then
be played back.
Example: If you want to select track 43 during playback of track
15, press the +10 button three times, and then press
the
button three times.
Repeating One or All Tracks
on the Compact Discs
15 ➝ 20 ➝ 30 ➝ 40 ➝ 41 ➝ 42 ➝ 43
2
+10
+10
You can decide for yourself:
The order in which you listen to the tracks
The tracks to which you do not wish to listen
To repeat...
Press Repeat on the Front Panel
one or more times until...
The current track indefinitely
All songs
REPEAT 1 is displayed
REPEAT ALL is displayed
When you wish to stop the Repeat function, press
(This function is only available during playback of a CD.
GB
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
1
Programming the Order of Playback
button.
This feature can be combined with the CD Repeat function.
1
2
is displayed.
3
Select the required track by pressing the SKIP buttons:
to move forwards through the tracks
to move backwards through the tracks
4
Press PROGRAM / SET.
is displayed.
Result:
2
).
Press PROGRAM / SET.
Result:
+10
The maximum capacity of one CD-R or CD-RW disc is
680MB.
Normally, one MP3 file has a capacity of 4MB, therefore
approximately 170 files can be recorded on a single disc.
If necessary, stop the player by pressing Stop (
5
To select other tracks, repeat Steps 3 and 4.
6
When you have finished selecting the tracks, press MP3-CD (
) to
start listening to the selection, in the order in which the tracks were
programmed.
7
Press Stop (
You can programme up to 24 tracks.
1
Playback sequence of albums and tracks
In case of Window Explorer display.
The arrows indicates playback sequence of albums and
tracks.
Tracks with jpg, wav or doc only are not audio files and
therefore will be skipped.
(E) CD-ROM drive
(This function is not available during playback of MP3-CD.)
Album 01
+10
Skipped
Kevin01.mp3
Kevin02.mp3
Kevin03.mp3
Kevin04.mp3
) twice to cancel the selection when the disc is playing.
REPEAT A-B Function
Kevin.jpg
Life.doc
When you select CD(TAPE) REPEAT A
B playback, the music
passages to which you were listening are repeated 3 times.
Album 04
1
Press MP3-CD(
) or TAPE button.
Result:The CD(TAPE) player starts playing.
2
Press REPEAT A
B button.
Result:The indications appear: START
The flashes appear: A
A Time is memorised.
3
Press REPEAT A
B button.
Result:The indications appear: END
B Time is memorised.
Your selected passages are repeated 3 times.
4
When you have finished the Repeat playback,
Press REPEAT A
B.
Album 02
Summer05.mp3
Summer06.mp3
Garden.mp3
Garden.mp3
Album 03
Last Memory Function
Album 05
Michael07.mp3
Michael08.mp3
Water.mp3
Water.mp3
(This function is only available during playback of MP3-CD.)
Skipped
Album 06
Kenny01.wav
Kenny02.wav
Album 07
Butterfly.mp3
Piano14.mp3
John15.mp3
Searching for a Specific Music
Passage on a CD
When MP3-CD playback is selected again after your CD
player has been stopped or turned off, this function allows
playback from the start of the track that you last listened
to.
Press the PROGRAM/SET button while your MP3-CD is being
played . The LAST ON and LAST OFF may be repeatedly selected.
2,4
3
1,7
6
3
When listening to a compact disc, you can quickly search for a
specific music passage on a track.
To search through the tracks...
Forwards
Backwards
Press and hold down...
for at least one second
for at least one second
It is recommended that you turn the volume down before using
this function.
2,3,4
1
12
Downloaded From Disc-Player.com Samsung Manuals
1
13
Searching for and Storing the Radio
Stations
Checking or Changing Programmed
Tracks
Searching for and Storing the Radio
Stations(continued)
Selecting a Stored Station
GB
GB
You can check or change your selection of tracks at any time.
You must have selected at least one track.
1
2
Press Stop (
) once if you have started listening to the selection.
Press PROGRAM / SET.
Result: The following indications are displayed:
Each time you press Program/Set, the next selection is displayed.
3
4
5
6
Press PROGRAM / SET one or more times until the track to be changed
is displayed.
Press
or
to select the new track.
You can store up to:
15 FM stations
15 AM stations
15 FM stations
8 MW stations
7 LW stations
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
1
2
3
Press PROGRAM / SET.
Press MP3-CD (
) to start listening to the selection.
Result: The first track selected is played.
8
(option)
(option)
(option)
Switch the system on by pressing Standby/On (
4
9
To store any other radio frequencies required, repeat Steps 3 to 6.
You can listen to a stored radio station as follows:
1
2
3
4
Switch the system on by pressing Standby/On (
Select the required frequency band by pressing TUNER/BAND again.
Result:The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW(OPTION)
Long Wave
To search for a station ...
).
Select the TUNER function by pressing TUNER/BAND .
Select the required frequency band by pressing TUNER/BAND.
Select the radio station as follows.
To listen to ...
Press ...
A stored station........................... a Press the TUNING MODE button
until “PRESET” is displayed.
b TUNING
and
required station.
Select the TUNER function by pressing TUNER/BAND .
SW1, SW2(OPTION)
You can change one or more tracks in your initial selection.
)
If you do not want to store the radio station found, revert to Step 4 and
search for another station.
Otherwise:
a Press PROGRAM/SET
Result: The program number is displayed for a few seconds.
b Press TUNING
and
to assign a program number between 1
and 15.
c Press PROGRAM/SET to store the radio station.
Result: The program number is no longer displayed and the station is
stored.
The PROGRAM function can be used to assign a new station to
an existing program number.
to select the
Press TUNING MODE again to exit the stored station selection
function.
Short Wave
1
8
Press Tuning Mode ...
Manually.......................................One or more times until MANUAL is
2,3
displayed.
Automatically................................One or more times until AUTO is
displayed.
2,3,5
4
5
1
4
6
6
7
Select the station to be stored by pressing
,
on the front panel
to decrease or increase the frequency respectively.
To scroll through the frequencies faster when searching manually,
hold down the
,
on the front panel .
The automatic search procedure may stop on a frequency that does
not correspond to a radio station.
If this happens, use the manual search mode.
Adjust the volume by:
Turning the VOLUME knob on the front panel
or
Pressing the VOLUME+, - button on the remote control.
Select the FM stereo or mono mode by pressing MO/ST on
the remote control.
8
4
8
+10
4
4
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
1
Testing the positions of the FM and AM(MW) aerials
before fixing them permanently
If reception from a specific FM radio station is poor, press MO/ST
to switch from stereo mode to mono. The quality of the sound will
be improved.
2,3
5
5
2,3
14
Downloaded From Disc-Player.com Samsung Manuals
6
5
4
7
5
2,3
15
You can record a compact disc on a cassette in two different ways:
Listening to a Cassette
Synchronised recording
Direct recording
Selecting the Cassette
Playback Mode
Synchronised recording
GB
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
2
3
Switch the system on by pressing Standby/On (
4
5
6
Insert the pre-recorded cassette with the open edge of the tape facing
downwards.
).
Select the TAPE function by pressing TAPE on the front panel.
Open the cassette deck by pushing on the corner of the cover marked PUSH
EJECT until you hear a click and then release it.
1
2
Switch the system on by pressing (
Press the PUSH/EJECT button ( ) to open the cassette door,
insert a cassette, and then close the cassette door.
Insert the cassette with the safety tabs.
Close the deck by pushing on it until it clicks into place.
) button.
Press the TAPE(
Side A
TAPE (
) once
Side B
TAPE (
) twice
Result: The cassette starts playing.
7
3
-10%SPEED
8
Load a compact disc.
Press the OPEN/CLOSE button (
Press TAPE SPEED to adjust the speed of the tape playing.And each
time the button is pressed,the mode changes as follows.
+10%SPEED
NORMAL
Press the MP3-CD(√/») button.
Use the CD selection (
,
5
Press...
Rewind the cassette...................
/
Fast-forward the cassette...........
/
The cassette player stops automatically when the beginning or end of
the cassette is reached.
9
To stop the playback or search, press Stop (
When playing a cassette, a counter is displayed to enable you to
take note of the counter value at the start of each track and thus
start playback at the beginning of the track to which you wish to
listen.
When the display indicates... The micro component system plays
back...
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note
of the counter values at the beginning of each track, reset the
counter by pressing COUNTER RESET.
) to close
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.
) buttons to select the desired song.
Press and hold CD SYNCHRO button.
When stopped, press the button to start the recording from the
first piece of music.
Press and hold CD SYNCHRO button during the playback of CD
to start the recording from the first part of the music being played.
When the cassette is stopped, select one of the following functions as
required.
To...
) to open the CD door.
Insert a CD and press the OPEN/CLOSE button (
the CD door.
4
Your micro component system has three cassette playback
modes which enable you to listen to both sides of a cassette
automatically.
Press REV.Mode until the appropriate symbol is displayed.
).
Insert a blank cassette in Deck.
Tape Counter
6
To stop recording, press
button.
1
) button.
5
4
1
4
4
6
Recording a Radio Program
8
9
You can record a radio program of your choice.
2,6
9
You do not need to adjust the volume, as it has no effect on
the recording.
8
3,5
Recording a Compact Disc
Direct recording
The direct recording mode enables you to start recording with
any track on the compact disc.
1
2
3
4
Switch the system on by pressing Standby/On (
5
Press REC/PAUSE.
Result: REC is displayed and recording starts.
6
To stop recording, press STOP ( )button.
You do not need to adjust the volume, as it has no effect on the recording.
1
2
3
4
Switch your system on by pressing Standby/On (
Insert a blank cassette in Deck.
Load a compact disc.
5
Press the REC/PAUSE button.
Result: Recording will begin.
6
To stop recording, press Stop ( )button.
Press the MP3-CD(
) button.
Use the CD selection (
,
).
Insert a blank cassette in Deck.
Select the TUNER function by pressing TUNER/BAND.
Select the radio station that you wish to record by pressing
or
button on the front panel or
or
on the remote control.
).
1
) buttons to select the desired song.
5
3
4
4
16
Downloaded From Disc-Player.com Samsung Manuals
6
17
GB
Timer Function
Power sound function
GB
This machine is equipped with the function of POWER SOUND,
which amplifies bass treble output to twice as much for powerful
surround-sound.
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
2
3
4
Switch the system on by pressing Standby/On (
Press Timer/Clock until
1,9
/
2
To cancel this function, press POWER SOUND again.
OFF is displayed for a few seconds.
Result:
Press EQ/S. BASS on the front panel or EQ/S. BASS on the remote
control until the required option is selected.
Select...
Normal balance (linear)............................................PASS
Balance suitable for pop music............................POP
Balance suitable for rock music ..........................ROCK
Balance suitable for classic music.......................CLASSIC
Balance suitable for jazz music............................JAZZ
Balance suitable for s-bass music.......................S-BASS
Press PROGRAM/SET.
Result:ON TIME is displayed for a few seconds, followed by any switchon time already set; you can set the timer switch-on time.
Set the timer switch-on time.
a Set the hour by pressing
b Press PROGRAM/SET.
Press the POWER SOUND button on the front panel.
P.SOUND is displayed for a few seconds.
Result:
A more powerful resonant sound is diffused.
Your Micro Component system has a bass amplification function
and equipped with a preset equalizer that allows you to
choose the most appropriate balance between treble and bass
frequencies , according to the type of music you are listening
to.That is called EQ/S.BASS.
This function makes the sound more powerful and real.
To obtain a...
3,4,5,6,7,8
).
TIMER is displayed.
.
4,5,6,7
Result: The minutes flash.
c Set the minutes by pressing
/
.
d Press PROGRAM/SET.
Result: OFF TIME is displayed for a few seconds, followed by any
switch-off time already set; you can now set the timer switch-off
time.
5
Set the timer switch-off time.
a Set the hour by pressing
/
.
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing
/
.
d Press PROGRAM/SET.
Result: VOL 10 is displayed, where 10 corresponds to the volume already
set.
6
Press
/
to adjust the volume level and press PROGRAM/SET.
Result:The source to be selected is displayed.
7
Press
/
switches on.
to select the source to be played when the system
4,5,6,7
Cancelling the Timer
After having set the timer, it will start automatically as shown by
the timer indication on the display. If you no longer wish to use
the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
If you select...
You must also...
TAPE (cassette)
TUNER (radio)
8
9
2
1
EQ /S.BASS (Super Bass) Function
Insert a recorded cassette in the deck.
.• Select the FM or AM (MW/LW) frequency
band by pressing
/
.
• Press PROGRAM/SET.
• Select a preset station by pressing
/
.
CD (compact disc)
Load a compact disc.
Press PROGRAM/SET to confirm the timer.
To...
Press TIMER ON/OFF...
Cancel the timer........................... Once.
Result:
is no longer displayed.
Restart the timer.......................... Twice.
Result:
is displayed again.
Press STANDBY/ON to set the system to standby mode.
Result:
is displayed on the top right of the time, indicating that the timer has
been set. The system will switch on and off automatically at the required
times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
You can use
/
/
button on the front panel instead of
button on the remote control.
18
Downloaded From Disc-Player.com Samsung Manuals
19
GB
Sleep Timer
GB
Connecting Headphones
You can set the system to switch off automatically.
Example: You wish to fall a sleep to music.
1
Press SLEEP on the remote control.
Result: The following indications are displayed:
2
Press SLEEP one or more times to indicate how long the system should
continue playing before it switches off:
90 MIN
OFF
60 MIN
15 MIN
45 MIN
30 MIN
You can connect a set of headphones to your micro
component system so that you can listen to music or radio
programs without disturbing other people in the room.
The headphones must have a 3.5 mm connector or
appropriate adaptor.
The following diagrams illustrate the precautions to be taken
when using or moving your micro-component system.
Connect the headphones to the Phones connector on the rear panel
(or top right corner).
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
Prolonged use of headphones at a high volume may damage your
hearing.
Ambient operating conditions:
Ambient temperature
5°C-35°C
Humidity
10-75%
To cancel the sleep timer function, press SLEEP one or more times until
OFF is displayed and the word SLEEP disappears.
GB
To obtain the best possible results from your
micro-component system, you must clean the following
elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Result: The loudspeakers are no longer used for sound output.
At any time, you can:
Check the remaining time by pressing SLEEP
Change the remaining time by repeating Steps 1 and 2
3
Cleaning Your
Micro-Component System
Safety Precautions
Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
Compact Disc Player
1
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
2
Regularly clean the player with a special cleaning disc (available from
your local dealer).
Tape Decks
1,2,3
1
2
Microphone Function (option)
The microphone enables the user to mix in his or her vocals to
sing -along with the music.
Preparation
Plug the microphone with a 3.5mm jack into microphone terminal.
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to lightning could damage the unit.
Press PUSH EJECT(
) to open the cassette deck.
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
3
MUTE Function
VOLUME
UP
You can turn the sound off temporarily.
Example: You wish to answer a telephone call.
1
2
DOWN
MIC
1
Press MUTE button.
2
To switch the sound back on (at the same volume as before), press
MUTE again, or press the VOLUME +, - button.
20
Downloaded From Disc-Player.com Samsung Manuals
Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment (fire
hazard) and can cause electric
shock.
Do not remove any equipment panels.
The inside of the unit
contains live components, which
cause electric shock.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odour when in use, unplug it
from the main supply and contact the after-sales service.
21
Precautions When Using Compact
Discs
Before Contacting the After-Sales
Service
Technical Specifications
GB
GB
Handle your compact discs with care. Always hold them by the
edges to avoid leaving fingerprints on the shiny surface.
When you have finished playing a compact disc, always put it back
in its case.
Do not fix paper or adhesive tape to the discs and do not write on
the label.
Clean them with a special-purpose cloth.
Store your compact discs in a clean place, out of direct sunlight,
where they will not be exposed to high temperatures.
Always use compact discs marked
.
It always takes a little time to become familiar with a new appliance.
If you have any of the problems listed below, try the solutions given.
They may save you the time and inconvenience of an unnecessary
service call.
RADIO
Problem
The system does not work
COMPACT
DIGITAL AUDIO
G
E
N
E
R
A
L
Precautions When Using Audio
Cassettes
Check that the tape in the cassette is sufficiently taut.
To prevent erasing a cassette that you wish to keep, remove the
safety tab on the upper edge of the cassette. To record a cassette,
where the tab has been broken, simply cover the opening with
adhesive tape.
When you have finished playing a cassette, always put it back in its
case.
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they place unnecessary strain
on the tape mechanism.
SAMSUNG strives to improve its products at all times. Both the design specifications and these user
instructions are thus subject to change without notice.
There is no sound
C
A
S
S
E
T
T
E
S
R
A
D
I
O
SW(option)
• The main lead is not correctly plugged into
a wall socket or the wall socket is not
switched on.
• The remote control batteries need replacing
or the polarity has not been respected.
• The STANDBY/ON button has not been
pressed.
Usable sensitivity
• The volume has been completely turned
down.
• The correct function (TUNER, MP3-CD,
TAPE, AUX) has not been selected.
• You have connected a set of earphones.
• The loudspeaker wires have been
disconnected.
• The MUTE button has been pressed.
Signal/noise ratio
35 dB
Usable sensitivity
54 dB
Total harmonic distortion
2%
The Timer does not work
• The timer has been stopped by pressing
TIMER ON/OFF.
In case it does not work, even the
action is taken as above.
• Press the P.SOUND button for 5 seconds in
power ‘OFF’(standby), then it is returned the
original position (RESET)
40 dB
LW(option)
Usable sensitivity
60 dB
AM (MW)
FM
Signal/noise ratio
55 dB
Usable sensitivity
15 dB
Total harmonic distortion
1%
• The CD function has not been selected.
• The disc has been inserted face down or is
either dirty or scratched.
• The laser sensor is dirty or dusty.
• The system has not been installed on a flat,
horizontal surface.
• Condensation has formed in the player;
leave the system in a warm, airy room for at
least one hour.
COMPACT DISC PLAYER
Channel separation
45 dB
The MP-3 CD player cannot be
played.
• Use the PC to confirm if the extension is
*.mp3.
Disc sizes
Diameter: 120 or 80 mm. Thickness: 1.2 mm
The tape does not start playing
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
TAPE DECK
Frequency range
125 Hz ~ 8 KHz
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Signal/noise ratio
40 dB
Channel separation
30 dB
Erasing effect
45 dB
Reception is poor or no radio
stations are received at all
• The TUNER function has not been selected.
• The radio frequency has not been correctly
selected.
• The aerial has been disconnected or is not
facing the right way. Turn it until you find the
best orientation.
• You are in a building that blocks radio
waves; you must use an outside aerial.
C
D
The compact disc player does not
/
start playing
M
P
3
C
D
Checks/Explanation
If the above guidelines do not allow you to solve the problem, take a
note of:
The model and serial numbers, normally printed on the rear of
the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG after-sales service.
22
Downloaded From Disc-Player.com Samsung Manuals
Frequency range
20 Hz - 20 KHz
Signal/noise ratio
70 dB (at 1 KHz) with filter
Distortion
0.1 % (at 1 KHz)
AMPLIFIER
Output power (6 Ω)
2 X 20 Watts RMS (total harmonic distortion : 10%)
Channel separation
40 dB
Signal/noise ratio
70 dB
GENERAL
Dimensions
145(W) x 226 (H) x 282(D) mm
23
THIS APPLIANCE IS MANUFACTURED BY:
AH68-01683K
Downloaded From Disc-Player.com Samsung Manuals