VoyagerTouch 60TM
VoyagerTouch 125HTM
VoyagerTouch 300TM
Video and touch system
Installation and Operation Manual vers. 1.0
LIMITED WARRANTY
Daxten warrants the VoyagerTouch™ to be in good working order for one year from the date of purchase
from Daxten or an authorised dealer. Should this product fail to be in good working order at any time
during this one year warranty period, Daxten will, at its option, repair or replace the Unit as set forth
below. Repair parts and replacement units will be either reconditioned or new. All replaced parts become
the property of Daxten. This limited warranty does not include service to repair damage to the Unit
resulting from accident, disaster, abuse, or unauthorised modification of the Unit, including static
discharge and power surges.
Limited Warranty service may be obtained by delivering this unit during the one year warranty period to
Daxten or an authorised repair centre providing a proof of purchase date. If this Unit is delivered by mail,
you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to
the warranty service location, and to use the original shipping container or its equivalent. You must call
for a return authorisation number first. Under no circumstances will a unit be accepted without a return
authorisation number. Contact an authorised repair centre or Daxten for further information
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER
EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME COUNTRIES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU.
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE
REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL DAXTEN
BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST SAVINGS OR
OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR THE
INABILITY TO USE SUCH PRODUCT, EVEN IF DAXTEN OR AN AUTHORISED DEALER HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
NOTE: This equipment complies with the requirements of European EMC directive 89/336 EEC in respect
of EN55022 Class B, EN 50082-1 and EN 60555-2.
This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
© Copyright 2003. All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any
means, electronic or mechanical, including photocopying and recording, without the prior written
permission of Daxten.
Printed in Denmark
Revision 1.0
Manual
Part
No:
1034-21Tman
2
INTRODUCTION
Thank you for choosing the Voyager Touch ™ system, designed for remote operation of
computers over long distances via CAT 5 cables.
By choosing the VoyagerTouch, you have assured that your installation is equipped for the
ever-increasing demands made in a modern computer-based information environment.
The Voyager touch system allows one computer to transmit a monitor image and
receive serial touch signals from a touchscreen.
Features
The Voyager Touch local unit connects directly to the computer
Different remote end units can be used:
•
•
•
•
•
•
VoyagerTouch 60 Remote for up to 60 m distance
VoyagerTouch 60PCB Remote for up to 60 m distance for building in monitors
VoyagerTouch 125H Remote for up to 125m distance
VoyagerTouch 300 Remote for up to 300 m distance
Up to 300 meters in one line without repeater
For distances up to 1200 m a video repeater and a video-delayline compensator
might be necessary.
Operation
The Voyager touch is simple to operate, no need for driver or software installation.
Compatibility
This product has been tested with a wide variety of Touch panels and LCD monitors.
However, it is impossible to guarantee correct operation with every monitor currently on the
market.
The VoyagerTouch is compatible with the following equipment:
• Monitor: VGA, SVGA, XGA, SXGA, UXGA
• Computers: all computers using a HD-15 VGA output and standard VGA signals
• RGB and two sync signals H/V
• Serial touch equipment with one way communication
3
GETTING STARTED
All versions of the models are listed here
Package Content
The VoyagerTouch 60 kit includes:
( 1034-01MTkit)
1
VoyagerTouch Local
1
VoyagerTouch 60 Remote
2
Power Transformer and mains cord*
1
VGA Cable
1
Serial Cable Crossed for Local
1This user manual
(1034-21TL)
(1034-01MTR)
(9014-00F-AW)
( 2051-02T )
((KT02-013880))
OR
The VoyagerTouch 125H kit includes:
1
1
2
1
1
1
( 1034-01HTkit)
VoyagerTouch Local
VoyagerTouch 125H Remote
Power Transformer and mains cord*
VGA Cable
Serial Cable Crossed for Local
This user manual
(1034-21TL)
(1034-01HTR)
(9014-00F-AW)
( 2051-02T )
(KT02-013880)
OR
The VoyagerTouch 300 kit includes:
1
VoyagerTouch Local
1
VoyagerTouch 300 Remote
2
Power Transformer and mains cord*
1
VGA Cable
1
Serial Cable Crossed for Local
1This user manual
( 1034-01Tkit)
(1034-21TL)
(1034-21MTR)
(9014-00F-AW)
( 2051-02T )
((KT02-013880))
* power supply type depends of the country.
On request you can get the VoyagerTouch 60 PCB buildt in, into your Touchscreen.
4
CONNECTORS ON VOYAGER TOUCH
VoyagerTouch 60
LCD/Touch
Please notice:
•
The »UTP IN« connector on the
back of some versions of the Local
box has no function in this
configuration.
PSU
230V AC
VoyagerTouch 60
Remote
Serial in
9-20V DC
VGA out
B
G
R
UTP in
PSU
UTP
230V AC
VoyagerTouch
Local
UTP OUT
VGA IN
PSU
230V AC
PC
VoyagerTouch 125H /300
Please notice:
•
LCD/Touch
The »UTP OUT« connector on the
front of some versions of the
Remote box has no function in this
configuration
PSU
UTP OUT
VGA IN
Remote
•
The »UTP IN« connector on the
back of some versions of the Local
box has no function in this
configuration
UTP IN
EQ GAIN
230V AC
9-24 V DC
PSU
UTP
230V AC
VoyagerTouch
Local
UTP OUT
PSU
230V AC
5
PC
VGA IN
CONNECTORS ON VOYAGER TOUCH
VoyagerTouch 60 Remote
LCD/Touch
Sharing supply with a monit
Serial
VGA
Power Cable
for LCD
9-20V DC
VGA out
B
G
R
UTP in
PSU
230V AC
LCD PSU 9-20 V DC
UTP
VoyagerTouch Remote 60
9-20V DC
VGA out
B
G
R
UTP in
The color and gain can be adjusted by turning the Blue Green and Red screws
If the light and brightness is still to weak use the adjustments on the monitor.
6
ADJUSTMENTS
VoyagerTouch Remote 125H
UTP IN
EQ GAIN
9-24 V DC
With EQ and Gain the picture can be adjusted for best quality.
VoyagerTouch Remote 300
UTP IN
EQ GAIN
9-24 V DC
With EQ and Gain the picture can be adjusted for best quality.
200-300 M
100-200 M
0-100 M
Please Notice ! inside the VoyagerTouch Remote 300 the distance of the cat5 cable is to be
set by microswitches.
200-300 M
100-200 M
0-100 M
R G B
R G B
As default the distance is set to maximum 300 M. Access to the switches changes is possible
by opening the top cover of the unit.
Before connecting the Voyager Touch extension please make sure that the Touch screen is
functioning correctly by connecting it directly to the PC’s serial port.
As mentioned previously, the system will work as a “plug & play” unit when connected. See
diagrams for connections.
7
TROUBLE SHOOTING
Video
No picture on the Remote.
If the Green LED on the unit is off - Power is missing
If the transmitter unit is working, check local out
Check the cables
Problems with colors.
Check the UTP cabling if you have problems with the colors
If the picture is unstable and contains noise, check the ground.
Touch is not responding
Make sure that the touch system is working when connected directly to the computer
If Touch system is not working when connected to the remote unit- check cables and
power supply.
Touchdriver on Pc is set to load automatically
SERVICE INFORMATION
Maintenance and repair
The unit does not contain any user-serviceable parts inside. Any malfunction of the unit should
be reported to a factory-authorised repair center for service. Any discrepancies in the
operation of the unit according to this manual should be reported to the Technical Support
Department of Daxten.
Technical support
If you cannot determine the nature of a problem, please call Daxten and ask for Technical
Support. If possible call from a phone located near the unit we may be able to solve your
problem directly over the phone. If we cannot solve your problem, and determine that the
fault is in the unit, we will issue a Return Material Authorisation (RMA) number that must
appear on the outside of all returned products. The unit should be double-packed in the
original container, insured, and shipped to the address given to you by our Technical Support
representative.
8
APPENDIX A. GENERAL SPECIFICATIONS
VoyagerTouch Local
Size
Weight
Power Consumption
Recommended Input Power
215 x 105 x 44 mm (8.46 x 4.13 x 1.73 in.)
0.80Kg (1.77lbs)
Max. 400mA (start peak 1,3A)
Regulated DC 12V/1,3A or 9V/2A
VoyagerTouch 125H Remote
Size
Weight
Power Consumption
Recommended Input Power
215 x 105 x 44 mm (8.46 x 4.13 x 1.73 in.)
0.80Kg (1.77lbs)
Max. 750 mA with UTPin module
Regulated DC 12V/1,3A or 9V/2A
VoyagerTouch 300 Remote
Size
Weight
Power Consumption
Recommended Input Power
215 x 105 x 44 mm (8.46 x 4.13 x 1.73 in.)
0.80Kg (1.77lbs)
Max. 750 mA with UTPin module
Regulated DC 12V/1,3A or 9V/2A
VoyagerTouch 60 Remote
Size
Weight
Power Consumption
Recommended Input Power
160 x 65 x 28 mm (6.30 x 2.56 x 1.10 in.)
0.35 Kg (0.77lbs)
Max. 120 mA
Regulated DC 12V/1,3A or 9V/2A
VoyagerTouch Remote 60 PCB
Size
Weight
Power Consumption
Recommended Input Power
160 x 65 x 28 mm (6.30 x 2.56 x 1.10 in.)
65 g (0.1 lbs)
Max. 150 mA
5V or 7-24V from moitor
Please note that these specifications are subject to change without prior notice.
9
Unit 5 Distribution Centre
Shannon Free Zone
Shannon, Co. Clare
1579 Lexington Road
Green Oaks, IL 60048
4 Harp Business Centre
Apsley Way
London NW2 7LW
Ireland
USA
United Kingdom
info.ie@daxten.com
www.daxten.ie
Tel: +353 (0) 61 23 4000
Fax: +353 (0) 61 23 4099
info.us@daxten.com
www.daxten.us
Tel: +1 847 816 1337
Fax: +1 847 816 4558
info.uk@daxten.com
www.daxten.co.uk
Tel: +44 (0) 20 8438 3800
Fax: +44 (0) 20 8438 3899
•
•
•
C/Florian Rey, 8
Entreplanta
50002 Zaragoza
B.P 04 - 77
Route de Cheptainville
91630 Marolles-enHurepoix
Udviklingsparken
Sønderhøj 46
8260 Viby J
France
info.dk@daxten.com
www.daxten.dk
Tel: +45 8734 5610
Fax: +45 8734 5611
España
info.es@daxten.com
www.daxten.com
Tel: +34 902 197 662
Fax: +34 976 219 943
•
info.fr@daxten.com
www.daxten.com
Tel: +33 (0)1 64 56 09 33
Fax: +33 (0)1 69 14 88 34
Denmark
•
•
Künstlergasse 11/4
1150 Wien
Salzufer 16, Geb. B
10587 Berlin
Seebahnstr. 231
8004 Zürich
Österreich
Deutschland
Schweiz
info.at@daxten.com
www.daxten.at
Tel: +43 (0)1 879 77 65
Fax:+43 (0)1 879 77 65 30
info.de@daxten.com
www.daxten.de
Tel: +49 (0) 30 8595 37-0
Fax:+49 (0) 30 8595 37-99
info.ch@daxten.com
www.daxten.com
Tel: +41 (0) 43 243 32 11
Fax: +41 (0) 43 243 32 16
•
•
•
www.daxten.com