Compaq 4710s - ProBook - Core 2 Duo 2.53 GHz Specifications

HP ProBook 4710s Notebook PC
Maintenance and Service Guide
© Copyright 2009 Hewlett-Packard
Development Company, L.P.
AMD is a registered trademark of Advanced
Micro Devices, Inc.
Bluetooth is a trademark owned by its
proprietor and used by Hewlett-Packard
Company under license. Intel, Core, and
Celeron are trademarks of Intel Corporation
in the United States and other countries.
Microsoft, Windows, and Windows Vista are
U.S. registered trademarks of Microsoft
Corporation. SD Logo is a trademark of its
proprietor.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: April 2009
Document Part Number: 536498-001
MSG revision history
Revision
Publication date
Description
A
October 2009
●
Added information indicating support for DDR3 memory in the following
location: Memory module on page 46.
●
Updated commodities in the following location: Product description
on page 1.
●
Added newly supported memory modules to spare parts listings in the
following locations: Computer major components on page 16, Sequential
part number listing on page 29, Memory module on page 46.
●
Added newly supported processors to spare parts listings in the following
locations: Computer major components on page 16, Sequential part number
listing on page 29, Processor on page 79.
●
Added newly supported WLAN modules to spare parts listings in the
following locations: Computer major components on page 16, Sequential
part number listing on page 29, WLAN module on page 56.
●
Added newly supported hard drives to spare parts listings in the following
locations: Computer major components on page 16, Mass storage devices
on page 27, Sequential part number listing on page 29, Hard drive
on page 53.
●
Added a newly supported Bluetooth module to spare parts listings in the
following locations: Computer major components on page 16, Sequential
part number listing on page 29, Bluetooth module on page 55.
●
Added newly supported system boards to spare parts listings in the following
locations: Computer major components on page 16, Sequential part number
listing on page 29, System board on page 81.
●
Added newly supported AC adapter to spare parts listings in the following
locations: Miscellaneous parts on page 28, Sequential part number listing
on page 29.
●
Changes to top cover descriptions in the following locations: Computer major
components on page 16, Sequential part number listing on page 29, Top
cover on page 66.
●
Deleted display cable spare part from the following locations: Display
assembly components on page 24, Sequential part number listing
on page 29, Display assembly on page 60.
iii
iv
Revision
Publication date
Description
B
January 2011
●
Updated the WLAN modules in the following locations: Product description
on page 1, Computer major components on page 16, Sequential part
number listing on page 29, WLAN module on page 56.
●
Updated the hard drives in the following locations: Product description
on page 1, Computer major components on page 16, Sequential part
number listing on page 29, Hard drive on page 53.
●
Updated the AC adapters in the following locations: Miscellaneous parts
on page 28, Sequential part number listing on page 29.
●
Updated the processors in the following locations: Product description
on page 1, Computer major components on page 16, Sequential part
number listing on page 29, Processor on page 79.
●
Added the Hard Drive Hardware Kit in the following locations: Mass storage
devices on page 27, Miscellaneous parts on page 28, Sequential part
number listing on page 29, Hard drive on page 53.
●
Added the Battery Latch Kit in the following locations: Miscellaneous parts
on page 28, Sequential part number listing on page 29.
●
Updated the memory modules in the following locations: Computer major
components on page 16, Sequential part number listing on page 29,
Memory module on page 46.
MSG revision history
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on
a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer
and the AC adapter comply with the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment (IEC 60950).
v
vi
Safety warning notice
Table of contents
1 Product description ........................................................................................................................................ 1
2 External component identification ................................................................................................................ 6
Top components ................................................................................................................................... 6
Display components ............................................................................................................ 6
TouchPad ............................................................................................................................ 7
Buttons, lights, and speakers ............................................................................................... 8
Keys ..................................................................................................................................... 9
Front components .............................................................................................................................. 11
Right-side components ....................................................................................................................... 12
Left-side components ......................................................................................................................... 13
Bottom components ........................................................................................................................... 14
3 Illustrated parts catalog ............................................................................................................................... 15
Service tag ......................................................................................................................................... 15
Computer major components ............................................................................................................. 16
Display assembly components ........................................................................................................... 24
Plastics Kit .......................................................................................................................................... 25
Cable Kit ............................................................................................................................................. 26
Mass storage devices ......................................................................................................................... 27
Miscellaneous parts ............................................................................................................................ 28
Sequential part number listing ............................................................................................................ 29
4 Removal and replacement procedures ....................................................................................................... 35
Preliminary replacement requirements ............................................................................................... 35
Tools required .................................................................................................................... 35
Service considerations ....................................................................................................... 35
Plastic parts ....................................................................................................... 35
Cables and connectors ..................................................................................... 36
Drive handling ................................................................................................... 36
Grounding guidelines ......................................................................................................... 37
Electrostatic discharge damage ........................................................................ 37
Packaging and transporting guidelines ............................................. 38
vii
Workstation guidelines ..................................................................... 38
Equipment guidelines ....................................................................... 39
Component replacement procedures ................................................................................................. 40
Service tag ......................................................................................................................... 40
Computer feet .................................................................................................................... 41
Battery ............................................................................................................................... 42
Switch cover and keyboard ................................................................................................ 43
Memory module ................................................................................................................. 46
Optical drive ....................................................................................................................... 48
Speakers ............................................................................................................................ 50
Palm rest ............................................................................................................................ 51
Hard drive .......................................................................................................................... 53
Bluetooth module ............................................................................................................... 55
WLAN module .................................................................................................................... 56
Display assembly ............................................................................................................... 60
Top cover ........................................................................................................................... 66
Power button board ........................................................................................................... 68
Modem module .................................................................................................................. 69
USB connector module ...................................................................................................... 71
RTC battery ....................................................................................................................... 73
Heat sink and fan ............................................................................................................... 75
RJ-45 (network) jack .......................................................................................................... 77
Processor ........................................................................................................................... 79
System board ..................................................................................................................... 81
5 Computer Setup ............................................................................................................................................ 84
Computer Setup in Windows Vista and Windows XP ........................................................................ 84
Starting Computer Setup ................................................................................................... 84
Using Computer Setup ...................................................................................................... 84
Navigating and selecting in Computer Setup .................................................... 84
Restoring factory settings in Computer Setup ................................................... 85
Computer Setup menus .................................................................................... 85
File Menu .......................................................................................... 86
Security menu ................................................................................... 86
Diagnostics menu ............................................................................. 87
System Configuration menu ............................................................. 87
Computer Setup in Linux .................................................................................................................... 90
Starting Computer Setup ................................................................................................... 90
Using Computer Setup ...................................................................................................... 90
Navigating and selecting in Computer Setup .................................................... 90
Restoring factory settings in Computer Setup ................................................... 91
Computer Setup menus ..................................................................................................... 91
File menu .......................................................................................................... 91
viii
Security menu ................................................................................................... 91
Diagnostics menu .............................................................................................. 92
System Configuration menu .............................................................................. 92
6 Specifications ................................................................................................................................................ 95
Computer specifications ..................................................................................................................... 95
17.3-inch, HD+ display specifications ................................................................................................ 96
Hard drive specifications .................................................................................................................... 97
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe specifications ........ 98
Blu-ray ROM with LightScribe DVD±RW SuperMulti DL Drive specifications .................................... 99
DVD-ROM Drive ............................................................................................................................... 100
System DMA specifications .............................................................................................................. 100
System interrupt specifications ......................................................................................................... 101
System I/O address specifications ................................................................................................... 102
System memory map specifications ................................................................................................. 104
7 Screw listing ................................................................................................................................................ 105
Phillips PM2.0×3.0 screw ................................................................................................................. 105
Phillips PM2.5×4.5 screw ................................................................................................................. 109
Phillips PM3.0×4.0 screw ................................................................................................................. 111
Phillips PM2.5×3.0 screw ................................................................................................................. 112
Phillips PM2.0×2.0 broadhead screw ............................................................................................... 115
Phillips PM2.0×3.0 broadhead screw ............................................................................................... 116
Phillips PM2.0×4.0 screw ................................................................................................................. 117
Phillips PM2.5×9.0 screw ................................................................................................................. 118
Phillips PM2.5×10.0 captive screw ................................................................................................... 119
Phillips PM2.5×8.0 captive screw ..................................................................................................... 121
Torx T8M2.5×6.0 screw ................................................................................................................... 122
8 Backup and recovery .................................................................................................................................. 124
Backup and recovery in Windows Vista ........................................................................................... 124
Overview .......................................................................................................................... 124
Backing up your information ............................................................................................ 124
Performing a recovery ..................................................................................................... 125
Using the Windows recovery tools .................................................................. 126
Using f11 ......................................................................................................... 126
Using a Windows Vista operating system DVD (purchased separately) ......... 127
Backup and recovery in Windows XP .............................................................................................. 128
Overview .......................................................................................................................... 128
Backing up your information ............................................................................................ 128
Performing a recovery ..................................................................................................... 129
Recovering your information ........................................................................... 129
Recovering the operating system and programs ............................................ 129
ix
9 Connector pin assignments ....................................................................................................................... 130
Audio-in (microphone) ...................................................................................................................... 130
Audio-out (headphone) ..................................................................................................................... 130
External monitor ............................................................................................................................... 131
HDMI ................................................................................................................................................ 132
RJ-11 (modem) ................................................................................................................................ 133
RJ-45 (network) ................................................................................................................................ 134
Universal Serial Bus ......................................................................................................................... 134
10 Power cord set requirements .................................................................................................................. 135
Requirements for all countries and regions ...................................................................................... 135
Requirements for specific countries and regions ............................................................................. 136
11 Recycling ................................................................................................................................................... 137
Battery .............................................................................................................................................. 137
Display .............................................................................................................................................. 137
Index ................................................................................................................................................................. 143
x
1
Product description
Category
Description
Product Name
HP ProBook 4710s Notebook PC
Processors
Chipset
●
Intel® Core™2 Duo T5870, 2.0 GHz, 2-MB L2 cache, 667-MHz Front Side Bus
(FSB)
●
Intel Core2 Duo T6570, 2.1 GHz, 2-MB L2 cache, TJ 100, 800-MHz FSB
●
Intel Core2 Duo T6670, 2.2 GHz, 2-MB L2 cache, 800-MHz FSB
●
Intel Core2 Duo P7370, 2.0 GHz, 3-MB L2 cache, 1066-MHz FSB
●
Intel Core2 Duo P7570, 2.26 GHz, 3-MB L2 cache, 1066-MHz FSB
●
Intel Core2 Duo P8600, 2.4 GHz, 3-MB L2 cache, 1066-MHz FSB
●
Intel Core2 Duo P8700, 2.53 GHz, 3-MB L2 cache, 1066-MHz FSB
●
Intel Core2 Duo T9400, 2.53 GHz, 6-MB L2 cache, 35W, 1066-MHz FSB
●
Intel Core2 Duo T9600, 2.8 GHz, 6-MB L2 cache, 1066-MHz FSB
●
Intel Pentium® Dual-Core T4200 2.00 GHz, 1-MB L2 cache, 800-MHz FSB
●
Intel Pentium Dual-Core T4300 2.16 GHz, 1-MB L2 cache, 800-MHz FSB
●
Intel Pentium Dual-Core T4400 2.20 GHz, 1MB L2 cache, 800-MHz FSB)
●
Intel Celeron® 585, 2.16 GHz, 2-MB L2 cache, 800-MHz FSB
●
Intel Celeron 900, 2.20 GHz, 1-MB L2 cache, 800-MHz FSB
●
Intel Celeron Dual-Core T1600, 1.66GHz, 1-MB L2 cache, 667-MHz FSB
●
Intel Celeron Dual-Core T1700 1.83-GHz, 1-MB L2 cache, 667-MHz FSB
●
Intel Celeron Dual-Core T3000 1.8 GHz, 1-MB L2 cache, 800-MHz FSB
●
Intel Celeron Dual-Core T3100 1.9 GHz, 1-MB L2 cache, 800-MHz FSB
Northbridge: PM45 with up to 1066-MHz FSB
Southbridge: Intel ICH-9M
Graphics
AMD Discrete Graphics ATI-M92S2LP with Hypermemory support
512-MB DDR2-500MHz (64Mx16, Qty 4)
Panels
All display assemblies include 2 wireless local area network (WLAN) antennas
●
17.3-inch HD+ BrightView
●
17.3-inch HD+
1
Category
Memory
Description
●
17.3-inch HD+ BrightView with camera
●
17.3-inch HD+ with camera
2 customer-accessible/upgradable memory module slots
Supports dual-channel memory
Supports up to 8 GB of system RAM
PC2-6400, 800 MHz, DDR2
Supports the following configurations:
●
8192-MB total system memory (4096 × 2, dual-channel)
●
4096-MB total system memory (4096 × 1)
●
4096-MB total system memory (2048 × 2, dual-channel)
●
3072-MB total system memory (2048 + 1024)
●
2048-MB total system memory (2048 × 1)
●
2048-MB total system memory (1024 × 2, dual-channel)
●
1024-MB total system memory (1024 × 1)
PC3-10600, 1333 MHz, DDR3
Supports the following configurations:
Hard drives
●
8092-MB total system memory (4096 x 2, dual-channel)
●
4096-MB total system memory (4096 x 1)
●
4096-MB total system memory (2048 x 2, dual-channel)
●
3072-MB total system memory (2048 + 1024, dual-channel)
●
2048-MB total system memory (2048 x 1)
●
2048-MB total system memory (1024 x 2, dual-channel)
●
1024-MB total system memory (1024 x 1)
Supports 9.5-mm (2.5-inch) hard drives
Customer-accessible
Serial ATA
Supports the following drives:
●
500-GB, 7200-rpm
●
320-GB, 5400-rpm
●
320-GB, 7200-rpm
●
250-GB, 5400-rpm
●
250-GB, 7200-rpm
●
160-GB, 7200-rpm
HP 3D DriveGuard
2
Chapter 1 Product description
Category
Description
Optical drives
Fixed (removal of 1 screw required)
Customer-accessible
Serial ATA
12.7-mm tray load
Supports the following drives:
Diskette drive
●
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
●
Blu-ray ROM with LightScribe DVD±RW SuperMulti DL Drive
●
DVD-ROM Drive
Supports external USB diskette drive only
Supports boot from external USB diskette drive
Audio
HD+ audio-ADI1984AJCPZ
Integrated microphone
Stereo speakers (2)
Modem
56K v.92 MDC 1.5-inch data/fax modem with digital line guard
Ethernet
Marvell 10/100/1000 Ethernet network interface card (NIC)
S3/S4/S5 wake on LAN: AC-yes
Wireless
Integrated WLAN options by way of wireless module:
2 WLAN antennas built into display assembly
Support for no-WLAN option
Support for the following WLAN formats:
●
Broadcom 4322 802.11a/b/g/n
●
Broadcom 4312 802.11b/g
●
Intel 5100 802.11a/b/g
●
Intel 5100 802.11a/b/g/n
●
Intel Wi-Fi Link 1000, 802.11b/g
●
Intel Wi-Fi Link 1000, 802.11b/g/n
●
Broadcom 43224AGN 802.11a/b/g/n 2x2 WiFi Adapter
●
Atheros 9285G 802.11b/g/n WiFi Adapter
Integrated personal area network (PAN) options by way of Bluetooth® module:
Support for no-WPAN option
Bluetooth 2.0
Bluetooth 2.1
Media Card Reader
One ExpressCard/34 slot
3
Category
Description
Media Card Reader supporting Memory Stick (MS), Memory Stick Pro (MSP),
MultiMediaCard (MMC), MultiMediaCard (MMC) Plus, Secure Digital (SD) Memory
Card, Secure Digital High Capacity (SDHC) Memory Card, xD-Picture Card (XD), xDPicture Card (XD) Type H, and xD-Picture Card (XD) Type M
Ports
Audio-in (stereo microphone)
Audio-out (stereo headphone)
RJ-11 (modem)
RJ-45 (Ethernet, includes link and activity lights)
USB (4)
HDMI
VGA (Dsub 15-pin) supporting 1600 × 1200 external resolution at 75-GHz (hot plug/
unplug with auto-detect)
Multi-pin AC power
Keyboard/pointing
devices
17.3-inch keyboard with integrated numeric keypad
TouchPad only, with 2 TouchPad buttons and vertical scrolling (taps enabled as
default)
Power requirements
90-W Smart AC adapter with localized cable plug support (3-wire plug with ground
pin)
6-cell, 47-Wh Li-ion battery
8-cell, 63-Wh Li-ion battery
Security
Supports Kensington security lock
Operating system
Preinstalled:
●
Windows 7 Professional 32
●
Windows 7 Home Premium 32
●
Windows Vista® Home Basic 32
●
Windows Vista Home Premium 32
●
Windows Vista Business 32
●
Windows Vista Business 32 (with Windows® XP Pro images)
●
FreeDOS
●
Red Flag Linux (in the People's Republic of China only)
●
SUSE Linux
Restore media:
4
Chapter 1 Product description
Category
Description
●
Windows 7 Home Basic 32
●
Windows 7 Home Premium 32
●
Windows 7 Professional 32
●
Windows 7 Professional 64
●
Windows Vista Home Basic 32
●
Windows Vista Home Premium 32
●
Windows Vista Business 32
●
Windows Vista Business 64
●
Windows XP Professional
●
Red Flag Linux (in the People's Republic of China only)
●
SUSE Linux
●
Windows Vista (DRDVD)
●
Windows XP Pro (DRDVD)
●
Windows Vista (Office Ready; DVD)
Certified: Microsoft® WHQL
Web Support:
Serviceability
●
Windows Vista Home Basic 32
●
Windows Vista Home Premium 32
●
Windows Vista Business 32
●
Windows Vista Business 64
●
Windows XP Professional
●
SUSE Linux
End-user replaceable parts:
AC adapter
Battery (system)
Hard drive
Memory module
Optical drive
WLAN module
5
2
External component identification
Top components
Display components
Item
Component
Function
(1)
Internal display switch
Turns off the display if the display is closed while the
power is on.
(2)
WLAN antenna locations
Send and receive signals from one or more WLAN
devices.
NOTE: The antennas are not visible from the outside of
the computer. For optimal transmission, keep the areas
immediately around the antennas free from obstructions.
To see wireless regulatory notices, refer to the section of
the Regulatory, Safety and Environmental Notices that
applies to your country or region. These notices are
located in Help and Support.
(3)
6
Internal microphone
Chapter 2 External component identification
Records sound.
Item
Component
Function
(4)
Webcam light (select models only)
On: The integrated camera is in use.
(5)
Webcam (select models only)
Records audio and video and captures still photographs.
Item
Component
Function
(1)
TouchPad*
Moves the pointer and selects or activates items on the
screen.
(2)
Left TouchPad button*
Functions like the left button on an external mouse.
(3)
TouchPad scroll zone
Scrolls up or down.
(4)
Right TouchPad button*
Functions like the right button on an external mouse.
TouchPad
*This table describes factory settings. View or change pointing device preferences as follows:
●
In Windows Vista, select Start > Control Panel > Hardware and Sound > Mouse.
●
In Windows XP, select Start > Control Panel > Printers and Other Hardware > Mouse.
Top components
7
Buttons, lights, and speakers
Item
Component
Function
(1)
Caps lock light
On: Caps lock is on.
(2)
Speakers (2)
Produce sound.
(3)
Info Center/QuickLook button
Launches Info Center or QuickLook.
(4)
Info Center/QuickLook light
●
On: The computer is on.
●
Blinking (5 times):
●
8
Chapter 2 External component identification
◦
When the computer is on, press button to
launch Info Center.
◦
When the computer is off or in Hibernation,
press button to launch QuickLook.
Off: The computer is off or in the Standby or
Hibernation state.
Item
Component
Function
(5)
Power light
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state
(Windows Vista) or Standby (Windows XP).
●
Off: The computer is off or in Hibernation.
●
When the computer is off, press the button to turn
on the computer.
●
When the computer is on, press the button to shut
down the computer.
●
When the computer is in Standby, press the button
briefly to exit Standby.
●
When the computer is in Hibernation, press the
button briefly to exit Hibernation.
(6)
Power button
If the computer has stopped responding and Windows
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off the
computer.
Keys
Item
Component
Function
(1)
esc key
Displays system information when pressed in
combination with the fn key.
(2)
fn key
Executes frequently used system functions when pressed
in combination with a function key or the esc key.
(3)
Windows logo key
Displays the Windows Start menu.
(4)
Windows applications key
Displays a shortcut menu for items beneath the pointer.
Top components
9
10
Item
Component
Function
(5)
Integrated numeric keypad keys
Can be used like the keys on an external numeric keypad
when pressed in combination with the fn and num lk
keys.
(6)
Function keys
Execute frequently used system functions when pressed
in combination with the fn key.
Chapter 2 External component identification
Front components
Item
Component
Function
(1)
Drive light
●
Blinking turquoise. The hard drive or optical drive is
being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked
the hard drive.
(2)
Wireless switch
Turns the wireless feature on or off, but does not
establish a wireless connection.
NOTE: A wireless network must be set up in order to
establish a wireless connection.
(3)
(4)
Wireless light
Media Card Reader
●
On: An integrated wireless device, such as a
wireless local area network (WLAN) device, the HP
Broadband Wireless Module, and/or a Bluetooth
device, is on.
●
Off: All wireless devices are off.
Supports the following optional digital card formats:
●
Memory Stick (MS)
●
Memory Stick Pro (MSP)
●
MultiMediaCard (MMC)
●
MultiMediaCard (MMC) Plus
●
Secure Digital (SD) Memory Card
●
Secure Digital High Capacity (SDHC) Memory Card
●
xD-Picture Card (XD)
●
xD-Picture Card (XD) Type H
●
xD-Picture Card (XD) Type M
(5)
Audio-out (headphone) jack
Connects optional powered stereo speakers,
headphones, ear buds, a headset, or television audio.
(6)
Audio-in (microphone) jack
Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.
Front components
11
Right-side components
Item
Component
Function
(1)
USB ports (2)
Connect optional USB devices.
(2)
RJ-11 (modem) jack
Connects a modem cable.
(3)
Optical drive (select models only)
Reads optical discs and, on select models, also writes to
optical discs.
4)
Optical drive light (select models only)
On: The optical drive is being accessed.
(5)
Battery light
●
Amber: A battery is charging.
●
Turquoise: A battery is close to full charge capacity.
●
Blinking amber: A battery that is the only available
power source has reached a low battery level. When
the battery reaches a critical battery level, the
battery light begins blinking rapidly.
●
Off: If the computer is plugged into an external
power source, the light turns off when all batteries in
the computer are fully charged. If the computer is
not plugged into an external power source, the light
stays off until the battery reaches a low battery level.
(6)
12
Power connector
Chapter 2 External component identification
Connects an AC adapter.
Left-side components
Item
Component
Function
(1)
ExpressCard slot
Supports optional ExpressCards.
(2)
Security cable slot
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a
deterrent, but it may not prevent the computer from being
mishandled or stolen.
(3)
RJ-45 (network) jack
Connects a network cable.
(4)
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(5)
External monitor port
Connects an external VGA monitor or projector.
(6)
HDMI port
Connects an optional HDMI device.
(7)
USB ports (2)
Connect optional USB devices.
Left-side components
13
Bottom components
14
Item
Component
Function
(1)
Battery release latches (2)
Release the battery from the battery bay.
(2)
Battery bay
Holds the battery.
Chapter 2 External component identification
3
Illustrated parts catalog
Service tag
The service tag, affixed to the bottom of the computer, provides information that may be needed
when troubleshooting system problems. The service tag provides the following information:
(1) Product name: This is the product name affixed to the front of the computer.
(2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
(3) Part number/Product number (p/n): This number provides specific information about the product's
hardware components. The part number helps a service technician to determine what components
and parts are needed.
(4) Model description: This is the alphanumeric identifier used to locate documents, drivers, and
support for the computer.
(5) Warranty period: Describes the duration of the warranty period for this computer.
When ordering parts or requesting information, provide the computer serial number and model
description provided on the service tag.
Service tag
15
Computer major components
16
Item
Description
(1)
Display assembly (includes 2 WLAN antenna transceivers and cables)
Spare part number
17.3-inch, HD+ BrightView display assembly with camera
535777-001
17.3-inch, HD+ BrightView display assembly
535779-001
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
17.3-inch, HD+ display assembly with camera
535778-001
17.3-inch, HD+ display assembly
535776-001
Display internal components: (not illustrated)
Display bezel:
●
Models equipped with a webcam
535769-001
●
Models not equipped with a webcam
535770-001
Display Cable Kit (includes wireless antenna and webcam cables)
535771-001
Display hinges (left and right hinges)
535772-001
(2)
Switch cover
535758-001
(3)
Keyboard
For use in Arabia
535798-171
For use in Brazil
535798-201
For use in Bulgaria
535798-261
For use in Czech Republic
535798-221
For use in Denmark
535798-081
For use in Europe
535798-B31
For use in Europe A4
535798-A41
For use in French Canada
535798-121
For use in France
535798-051
For use in Greece
535798-DJ1
For use in Germany
535798-041
For use in Hungary
535798-211
For use in Iceland
535798-DD1
For use in Israel
535798-BB1
For use in Italy
535798-061
For use in Japan
535798-291
For use in South Korea
535798-AD1
For use in Latin America
535798-161
For use in Norway
535798-091
For use in Portugal
535798-131
For use in Russia
535798-251
For use in Sweden/Finland
535798-B71
For use in Slovakia
535798-231
For use in Spain
535798-071
Computer major components
17
Item
Description
Spare part number
For use in Switzerland
535798-BG1
For use in Thailand
535798-281
For use in Turkey
535798-141
For use in Taiwan
535798-AB1
For use in United Kingdom
535798-031
For use in the United States
535798-001
(4)
Palm rest (includes TouchPad)
535775-001
(5)
RJ-45 (network) cable (included in Cable Kit, spare part number 535757-001)
(6)
Speakers
535795-001
(7)
Top cover
535796-001
(8)
RJ-11 (modem) cable (included in Cable Kit, spare part number 535757-001)
(9)
Fan
535766-001
(10)
Heat sink (includes replacement thermal material)
535767-001
(11)
System board (includes replacement thermal material and the ExpressCard assembly)
For use in computers with DDR2 memory
574508-001
For use in computers with DDR3 memory
583077-001
Processor (includes replacement thermal material) (not illustrated)
Intel Core2 Duo processors:
●
T5870 (2.0 GHz, 800-MHz FSB, 2-MB L2 cache)
535835-001
●
T6570 (2.1 GHz, 800-MHz FSB, 2-MB L2 cache, TJ 100) (not available for Japan; only
available with Intel WLAN or no WLAN)
513598-001
●
T6670 (2.2 GHz, 800-MHz FSB, 2-MB L2 cache)
572927-001
●
P7370 (2.0 GHz, 1066-MHz FSB, 3-MB L2 cache) (only available with Intel WLAN)
507966-001
●
P7570 (2.26 GHz, 1066-MHz FSB, 3-MB L2 cache)
572930-001
●
P8600 (2.4 GHz, 1066-MHz FSB, 3-MB L2 cache)
507961-001
●
P8700 (2.53 GHz, 1066-MHz FSB, 3-MB L2 cache)
507960-001
●
T9400 (2.53 GHz, 1066-MHz FSB, 6-MB L2 cache, 35W)
507954-001
●
T9600 (2.8 GHz, 1066-MHz FSB, 6-MB L2 cache)
507952-001
Intel Pentium Dual-Core processors:
●
T4200 (2.0 GHz, 800-MHz FSB, 1-MB L2 cache)
513599-001
●
T4300 (2.16 GHz, 800-MHz FSB, 1-MB L2 cache)
572929-001
●
T4400 (2.20 GHz, 800-MHz FSB, 1MB L2 cache)
582496-001
Intel Celeron processors:
18
●
585 (2.16 GHz, 800-MHz FSB, 2-MB L2 cache)
519898-001
●
900 (2.20 GHz, 800-MHz FSB, 1-MB L2 cache)
534419-001
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
Intel Celeron Dual-Core processors:
●
T1600 (1.66GHz, 667-MHz FSB, 1-MB L2 cache)
532324-001
●
T1700 (1.83-GHz, 667-MHz FSB, 1-MB L2 cache)
534084-001
●
T3000 (1.8-GHz, 800-MHz FSB, 1-MB L2 cache)
572925-001
●
T3100 (1.9-GHz, 800-MHz FSB, 1-MB L2 cache)
572926-001
(12)
Battery connector board
(13)
Modem module
535754-001
For use in all countries and regions except Australia and New Zealand
510100-001
For use only in Australia and New Zealand
510100-011
(14)
Power button board and cable
574493-001
(15)
Power connector and cable (included in Cable Kit, spare part number 535757-001)
(16)
Optical disk drive connector board
(17)
WLAN module
535755-001
Broadcom 4322 802.11a/b/g/n WLAN modules:
●
Broadcom 4322 802.11a/b/g/n WLAN module for use in Antigua and Barbuda,
Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and
Tobago, the U.S. Virgin Islands, and the United States
504664-001
●
Broadcom 4322 802.11a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the
British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape
Verde, the Central African Republic, Chad, Chile, the People's Republic of China,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic,
Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El
Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong
Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan,
Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the
Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru,
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the
Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the
Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United
Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia,
and Zimbabwe
504664-002
Broadcom 4312 802.11b/g WLAN modules:
●
Broadcom 4312 802.11b/g WLAN module for use in Antigua and Barbuda, Barbados,
Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the
U.S. Virgin Islands, and the United States
504593-003
Computer major components
19
Item
Description
Spare part number
●
504593-004
Broadcom 4312 802.11b/g WLAN module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the
British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape
Verde, the Central African Republic, Chad, Chile, the People's Republic of China,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic,
Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El
Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong
Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan,
Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the
Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru,
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the
Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the
Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United
Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia,
and Zimbabwe
Intel Wi-Fi Link 5100 802.11a/b/g/n WLAN modules:
●
Intel Wi-Fi Link 5100 802.11a/b/g/n WLAN module for use in all countries and regions
480985-001
●
Intel Wi-Fi Link 5100 802.11a/b/g WLAN module for use in Russia and the Ukraine
482957-001
Atheros 9285G 802.11b/g/n WiFi Adapter WLAN modules:
●
20
Atheros 9285G 802.11b/g/n WiFi Adapter WLAN module for use in Antigua and
Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico,
Trinidad and Tobago, the U.S. Virgin Islands, and the United States
Chapter 3 Illustrated parts catalog
580101-001
Item
Description
Spare part number
●
580101-002
Atheros 9285G 802.11b/g/n WiFi Adapter WLAN module for use in Afghanistan,
Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba,
Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus,
Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina,
Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's
Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the
Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor,
Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji,
Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau,
Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the
Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia,
Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the
Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan,
Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland,
Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino,
Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South
Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the
Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan,
Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay,
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
Intel Wi-Fi Link 1000, 802.11b/g/n WLAN modules:
●
Intel Wi-Fi Link 1000, 802.11b/g/n WLAN module for use in Andorra, Antigua and
Barbuda, Argentina, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Barbados,
Belgium, Bolivia, Bosnia and Herzegovina, Brazil, Brunei, Bulgaria, Canada, Cayman
Islands, Chile, China, Colombia, Costa Rica, Croatia, Cyprus, the Czech Republic,
Denmark, the Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland,
France, French Guiana, Guadeloupe, Guam, Georgia, Germany, Ghana, Greece,
Guatemala, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland,
Israel, Italy, Ivory Coast, Jamaica, Japan, Jordan, Kenya, Kuwait, Kyrgyzstan, Latvia,
Lebanon, Liechtenstein, Lithuania, Luxembourg, Malawi, Malaysia, Malta, Martinique,
Mauritius, Mexico, Monaco, Montenegro, Morocco, the Nether Antilles, the
Netherlands, New Zealand, Nicaragua, Nigeria, Oman, Pakistan, Panama, Paraguay,
Peru, the Philippines, Poland, Portugal, Puerto Rico, Quatar, Romania, San Marino,
Saudi Arabia, Senegal, Singapore, Slovakia, Slovenia, South Africa, South Korea,
Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Tanzania, Thailand, Trinidad and
Tobago, Turkey, United Arab Emirates, the United Kingdom, the United States,
Uruguay, the U.S. Virgin Islands, Venezuela, and Vietnam
572520-001
●
Intel Wi-Fi Link 1000, 802.11b/g WLAN module for use in Russia and the Ukraine
585984-001
Broadcom 43224AGN 802.11a/b/g/n 2x2 WiFi Adapter WLAN modules:
●
Broadcom 43224AGN 802.11a/b/g/n 2x2 WiFi Adapter WLAN module for use in
Antigua and Barbuda, Aruba, the Bahamas, Barbados, Belize, Canada, Guam,
Guinea, Haiti, Jamaica, the Nether Antilles, Puerto Rico, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, the United States, and the U.S. Virgin
Islands
582564-001
Computer major components
21
Item
(18)
Spare part number
●
582564-002
Broadcom 43224AGN 802.11a/b/g/n 2x2 WiFi Adapter WLAN module for use in
Afghanistan, Albania, Algeria, Andorra, Angola, Argentina, Armenia, Australia, Austria,
Azerbaijan, Bahrain, Belarus, Belgium, Benin, Bermuda, Bhutan, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei, Bulgaria, Burkina Faso,
Burundi, Cambodia, Cameroon, Cape Verde, Cayman Islands, the Central African
Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the
Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana,
Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guinea-Bissau, Guyana, Honduras, Hong Kong, Hungary,
Iceland, India, Ireland, Italy, the Ivory Coast, Japan, Jordan, Kazakhstan, Kenya,
Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein,
Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru,
Nepal, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman,
Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland,
Portugal, Qatar, the Republic of Moldova, Romania, Rwanda, Samoa, San Marino,
Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South
Korea, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan,
Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
Base enclosure (includes rubber feet)
535752-001
Rubber Kit (not illustrated, contains 7 computer feet and 8 display bezel screw covers)
535793-001
(19)
USB connector and cable (included in Cable Kit, spare part number 535757-001)
(20)
Bluetooth cable (included in Cable Kit, spare part number 535757-001)
(21)
Bluetooth module
Bluetooth 2.0 module
398393-002
Bluetooth 2.1 module
537921-001
(22)
RTC battery
449137-001
(23)
Hard drive (includes hard drive bracket)
(24)
(25)
22
Description
500-GB, 7200-rpm
634920-001
320-GB, 5400-rpm
622643-001
320-GB, 7200-rpm
603783-001
250-GB, 5400-rpm
535763-001
250-GB, 7200-rpm
538972-001
160-GB, 7200-rpm
577972-001
Optical drive (includes bezel and bracket)
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
535761-001
Blu-ray ROM with LightScribe DVD±RW SuperMulti DL Drive
535759-001
DVD-ROM Drive
535760-001
Memory modules
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
For use in models that use DDR2 memory
●
1-GB (PC2-6400, 800-MHz, DDR2)
598861-001
●
2-GB (PC2-6400, 800-MHz, DDR2)
598858-001
For use in models that use DDR3 memory
(26)
●
2-GB (PC3-10600, 1333-MHz, DDR3)
598856-001
●
1-GB (PC3-10600, 1333-MHz, DDR3)
598859-001
8-cell, 63-Wh Li-ion battery
535753-001
Computer major components
23
Display assembly components
Item
Description
(1)
Display bezel
Display bezel with webcam
535769-001
Display bezel without a webcam
535770-001
Display Cable Kit, includes:
535771-001
(2a)
Webcam module cable
(2b)
Microphone cable
(2c)
Wireless antenna transceivers and cables
(2d)
Display panel cable
Display Hinge Kit, includes:
24
Spare part number
Chapter 3 Illustrated parts catalog
535772-001
(3a)
Display hinge bracket
(3b)
Display left and right hinges
(4)
Display enclosure
535768-001
Plastics Kit
Item
Description
Spare part number
Plastics Kit:
535780-001
(1)
ExpressCard slot bezel
(2)
Optical drive bezel
Plastics Kit
25
Cable Kit
Item
26
Description
Spare part number
Cable Kit
535757-001
(1)
TouchPad cable
(2)
RJ-11 (modem) jack cable
(3)
RJ-45 (network) jack cable
(4)
Bluetooth cable
(5)
USB cable
Chapter 3 Illustrated parts catalog
Mass storage devices
Item
Description
(1)
Optical drives (include bezel and bracket)
(2)
Spare part number
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
535761-001
Blu-ray ROM with LightScribe DVD±RW SuperMulti DL Drive
535759-001
DVD-ROM Drive
535760-001
Hard drives (include bracket)
500-GB, 7200-rpm
634920-001
320-GB, 5400-rpm
622643-001
320-GB, 7200-rpm
603783-001
250-GB, 5400-rpm
535763-001
250-GB, 7200-rpm
538972-001
160-GB, 7200-rpm
577972-001
Hard Drive Hardware Kit (not illustrated)
630891-001
Mass storage devices
27
Miscellaneous parts
Description
Spare part number
90W Smart AC Adapter RC/V 3W
613153-001
90W Smart AC Adapter RC/V EM 3W
613160-001
Power cords:
For use in the United States
246959-001
For use in Australia and New Zealand
246959-011
For use in Europe, the Middle East, and Africa
246959-021
For use in the United Kingdom
246959-031
For use in Italy
246959-061
For use in Denmark
246959-081
For use in Brazil
246959-201
For use in Japan
246959-291
For use in South Korea
246959-AD1
For use in Israel
246959-BB1
Screw Kit
535794-001
Screw Kit includes:
28
●
Phillips PM2.0×3.0 screw
●
Phillips PM2.0×4.0 screw
●
Phillips PM2.5×3.0 screw
●
Phillips PM2.5×4.5 screw
●
Phillips PM2.5×5.0 screw
●
Phillips PM2.5×9.0 screw
●
Phillips PM2.5×10.0 captive screw
●
Phillips PM2.0×2.0 broadhead screw
●
Phillips PM2.0×3.0 broadhead screw
●
Phillips PM3.0×4.0 screw
●
Torx T8M2.5×6.0 screw
Hard Drive Hardware Kit
630891-001
Battery Latch Kit (15.6/17.3)
602064-001
Chapter 3 Illustrated parts catalog
Sequential part number listing
Spare part
number
Description
246959-001
Power cord for use in the United States
246959-011
Power cord for use in Australia
246959-021
Power cord for use in Europe
246959-031
Power cord for use in the United Kingdom
246959-061
Power cord for use in Italy
246959-081
Power cord for use in Denmark
246959-201
Power cord for use in Brazil
246959-291
Power cord for use in Japan
246959-AD1
Power cord for use in South Korea
246959-AG1
Power cord for use in Switzerland
246959-BB1
Power cord for use in Israel
398393-002
Bluetooth 2.0 module for use in all countries and regions except Japan and Asia Pacific
449137-001
RTC battery
480985-001
Intel Wi-Fi Link 5100 802.11a/b/g/n WLAN module for use in all countries and regions
482957-001
Intel Wi-Fi Link 5100 802.11a/b/g WLAN module for use in Russia and the Ukraine
504593-003
Broadcom 4312 802.11b/g WLAN module for use in Antigua and Barbuda, Barbados, Belize, Canada, the
Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands, and the United States
504593-004
Broadcom 4312 802.11b/g WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua
and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan,
Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique,
Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland,
Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and
Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St.
Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania,
Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United
Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
504664-001
Broadcom 4322 802.11a/b/g/n WLAN module for use in Antigua and Barbuda, Barbados, Belize, Canada,
the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands, and the United
States
Sequential part number listing
29
30
Spare part
number
Description
504664-002
Broadcom 4322 802.11a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola,
Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan,
Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique,
Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland,
Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and
Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St.
Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania,
Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United
Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
507952-001
Intel Core2 Duo T9600 processor (2.8 GHz, 1066-MHz FSB, 6-MB L2 cache)
507954-001
Intel Core2 Duo T9400 processor (2.53 GHz, 1066-MHz FSB, 6-MB L2 cache, 35W)
507960-001
Intel Core2 Duo P8700 processor (2.53 GHz, 1066-MHz FSB, 3-MB L2 cache)
507961-001
Intel Core2 Duo P8600 processor (2.4 GHz, 1066-MHz FSB, 3-MB L2 cache)
507966-001
Intel Core2 Duo P7370 processor (2.0 GHz, 1066-MHz FSB, 3-MB L2 cache) (Only available with Intel
WLAN)
510100-001
Modem module for use in all countries and regions except Australia and New Zealand
510100-011
Modem module for use only in Australia and New Zealand
513598-001
Intel Core2 Duo T6570 processor (2.1 GHz, 800-MHz FSB, 2-MB L2 Cache, TJ 100) (not available for
Japan. Only available with Intel WLAN or no WLAN)
513599-001
Intel Pentium Dual-Core T4200 processor (2.0 GHz, 800-MHz FSB, 1-MB L2 cache)
519898-001
Intel Celeron 585 processor (2.16 GHz, 800-MHz FSB, 2-MB L2 cache)
532324-001
Intel Celeron Dual-Core T1600 processor (1.66GHz, 667-MHz FSB, 1-MB L2 cache)
534084-001
Intel Celeron Dual-Core T1700 processor (1.83-GHz, 667-MHz FSB, 1-MB L2 cache)
534419-001
Intel Celeron 900 processor (2.20 GHz, 800-MHz FSB, 1-MB L2 cache)
535752-001
Base enclosure (includes rubber feet)
535753-001
8-cell, 63-Wh Li-ion battery
535754-001
Battery connector board
535755-001
Optical disk drive connector board
535757-001
Display Cable Kit (includes microphone, wireless antenna, display panel, and webcam cables)
535758-001
Switch cover
535759-001
Blu-ray ROM with LightScribe DVD±RW SuperMulti DL Drive
Chapter 3 Illustrated parts catalog
Spare part
number
Description
535760-001
DVD ROM Drive
535761-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
535763-001
250-GB, 5400-rpm hard drive
535766-001
Broadcom Bluetooth module
535767-001
Heat sink (includes replacement thermal material)
535768-001
Display enclosure
535769-001
Display bezel with webcam
535770-001
Display bezel without a webcam
535771-001
Display Cable Kit
535772-001
Display hinge
535775-001
Palm rest with TouchPad
535776-001
17.3-inch, HD+ display assembly
535777-001
17.3-inch, HD+ BrightView display assembly with camera
535778-001
17.3-inch, HD+ display assembly with camera
535779-001
17.3-inch, HD+ BrightView display assembly
535780-001
Plastics Kit (includes ExpressCard slot bezel and optical drive bezel)
535793-001
Rubber Kit
535794-001
Screw Kit
535795-001
Speaker Kit
535796-001
Top cover
535797-001
Webcam module
535798-001
Keyboard for use in the United States
535798-031
Keyboard for use in the United Kingdom
535798-041
Keyboard for use in Germany
535798-051
Keyboard for use in France
535798-061
Keyboard for use in Italy
535798-071
Keyboard for use in Spain
535798-081
Keyboard for use in Denmark
535798-091
Keyboard for use in Norway
535798-121
Keyboard for use in French Canada
535798-131
Keyboard for use in Portugal
535798-141
Keyboard for use in Turkey
535798-161
Keyboard for use in Latin America
535798-171
Keyboard for use in Arabia
Sequential part number listing
31
32
Spare part
number
Description
535798-201
Keyboard for use in Brazil
535798-211
Keyboard for use in Hungary
535798-221
Keyboard for use in Czech Republic
535798-231
Keyboard for use in Slovakia
535798-251
Keyboard for use in Russia
535798-261
Keyboard for use in Bulgaria
535798-281
Keyboard for use in Thailand
535798-291
Keyboard for use in Japan
535798-A41
Keyboard for use in Europe A4
535798-AB1
Keyboard for use in Taiwan
535798-AD1
Keyboard for use in South Korea
535798-B31
Keyboard for use in Europe
535798-B71
Keyboard for use in Sweden/Finland
535798-BB1
Keyboard for use in Israel
535798-BG1
Keyboard for use in Swizerland
535798-DD1
Keyboard for use in Iceland
535798-DJ1
Keyboard for use in Greece
535835-001
Intel Core2 Duo T5870 processor (2.0 GHz, 800-MHz FSB, 2-MB L2 cache)
537921-001
HP Integrated Bluetooth 2.1 module for use in all countries and regions except Japan and Asia Pacific
countries and regions
538972-001
250-GB, 7200-rpm hard drive
572520-001
Intel Wi-Fi Link 1000, 802.11b/g/n WLAN module for use in Andorra, Antigua and Barbuda, Argentina,
Aruba, Australia, Austria, Azerbaijan, the Bahamas, Barbados, Belgium, Bolivia, Bosnia and Herzegovina,
Brazil, Brunei, Bulgaria, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Croatia, Cyprus, the
Czech Republic, Denmark, the Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France,
French Guiana, Guadeloupe, Guam, Georgia, Germany, Ghana, Greece, Guatemala, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan, Jordan,
Kenya, Kuwait, Kyrgyzstan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malawi, Malaysia,
Malta, Martinique, Mauritius, Mexico, Monaco, Montenegro, Morocco, the Nether Antilles, the Netherlands,
New Zealand, Nicaragua, Nigeria, Oman, Pakistan, Panama, Paraguay, Peru, the Philippines, Poland,
Portugal, Puerto Rico, Quatar, Romania, San Marino, Saudi Arabia, Senegal, Singapore, Slovakia,
Slovenia, South Africa, South Korea, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Tanzania, Thailand,
Trinidad and Tobago, Turkey, United Arab Emirates, the United Kingdom, the United States, Uruguay, the
U.S. Virgin Islands, Venezuela, and Vietnam
572925-001
Intel Celeron Dual-Core T3100 processor (1.9-GHz, 800-MHz FSB, 1-MB L2 cache)
572926-001
Intel Celeron Dual-Core T3000 processor (1.8-GHz, 800-MHz FSB, 1-MB L2 cache)
572927-001
Intel Core2 Duo T6670 processor (2.2 GHz, 800-MHz FSB, 2-MB L2 cache)
572929-001
Intel Pentium Dual-Core T4300 processor (2.16 GHz, 800-MHz FSB, 1-MB L2 cache)
572930-001
Intel Core2 Duo P7570 processor (2.26 GHz, 1066-MHz FSB, 3-MB L2 cache)
574493-001
Power button board (includes cable)
Chapter 3 Illustrated parts catalog
Spare part
number
Description
574508-001
System board for use in computers with DDR2 memory (includes replacement thermal material and the
ExpressCard assembly)
577972-001
160-GB, 7200-rpm hard drive
580101-001
Atheros 9285G 802.11b/g/n WiFi Adapter WLAN module for use in Antigua and Barbuda, Barbados, Belize,
Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands, and the
United States
580101-002
Atheros 9285G 802.11b/g/n WiFi Adapter WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas,
Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan,
Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique,
Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland,
Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and
Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St.
Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania,
Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United
Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
582564-001
Broadcom 43224AGN 802.11a/b/g/n 2x2 WiFi Adapter WLAN module for use in Antigua and Barbuda,
Aruba, the Bahamas, Barbados, Belize, Canada, Guam, Guinea, Haiti, Jamaica, the Nether Antilles, Puerto
Rico, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, the United States, and the
U.S. Virgin Islands
582564-002
Broadcom 43224AGN 802.11a/b/g/n 2x2 WiFi Adapter WLAN module for use in Afghanistan, Albania,
Algeria, Andorra, Angola, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahrain, Belarus, Belgium,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei,
Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Cayman Islands, the Central African
Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor,
Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea-Bissau, Guyana, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Italy, the Ivory Coast,
Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali,
Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Netherlands, New Zealand, Nicaragua,
Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines,
Poland, Portugal, Qatar, the Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and
Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, Swaziland, Sweden, Switzerland,
Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela,
Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
583077-001
System board for use in computers with DDR3 memory (includes replacement thermal material and the
ExpressCard assembly)
584296-001
Intel Pentium Dual-Core T4400 processor (2.20 GHz, 800-MHz FSB, 1MB L2 cache)
Sequential part number listing
33
34
Spare part
number
Description
585984-001
Intel Wi-Fi Link 1000, 802.11b/g WLAN module for use in Russia and the Ukraine
598856-001
2-GB memory module (PC3-10600, 1333-MHz, DDR3)
598858-001
2-GB memory module (PC2-6400, 800-MHz, DDR2)
598859-001
1-GB memory module (PC3-10600, 1333-MHz, DDR3)
598861-001
1-GB memory module (PC2-6400, 800-MHz, DDR2)
602064-001
Battery Latch Kit (15.6/17.3)
603783-001
320-GB, 7200-rpm hard drive
613153-001
90W Smart AC Adapter RC/V 3W
613160-001
90W Smart AC Adapter RC/V EM 3W
622643-001
320-GB, 5400-rpm hard drive
630891-001
Hard Drive Hardware Kit
634920-001
500-GB, 7200-rpm hard drive
Chapter 3 Illustrated parts catalog
4
Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Torx T8 screwdriver
●
Phillips P0 and P1 screwdrivers
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts.
Use care when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.
Preliminary replacement requirements
35
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to
unseat or seat the cables during removal and insertion. Handle cables by the connector whenever
possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in
such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex
cables with extreme care; these cables tear easily.
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to
the computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on, and then shut it down through the operating
system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and
be sure that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a staticproof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
36
Chapter 4 Removal and replacement procedures
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some
protection, but in many cases, ESD contains enough power to alter device parameters or melt
silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
CAUTION: To prevent damage to the computer when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines
described in this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Preliminary replacement requirements
37
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved containers or
packaging.
●
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●
Place items on a grounded surface before removing items from their containers.
●
Always be properly grounded when touching a component or assembly.
●
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive
foam.
●
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that
mechanized equipment used for moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate
electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
38
●
Cover the workstation with approved static-shielding material.
●
Use a wrist strap connected to a properly grounded work surface and use properly grounded
tools and equipment.
●
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle
these items only at static-free workstations.
●
Avoid contact with pins, leads, or circuitry.
●
Turn off power and input signals before inserting or removing connectors or test equipment.
Chapter 4 Removal and replacement procedures
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible
straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper
ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug
connectors, use alligator clips to connect a wrist strap.
●
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)
can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive strips
must be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●
Antistatic tape
●
Antistatic smocks, aprons, and sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Nonconductive foam
●
Conductive tabletop workstations with ground cords of one megohm resistance
●
Static-dissipative tables or floor mats with hard ties to the ground
●
Field service kits
●
Static awareness labels
●
Material-handling packages
●
Nonconductive plastic bags, tubes, or boxes
●
Metal tote boxes
●
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Preliminary replacement requirements
39
Component replacement procedures
This section provides removal and replacement procedures.
There are as many as 89 screws, in 15 different sizes, that must be removed, replaced, or loosened
when servicing the computer. Make special note of each screw size and location during removal and
replacement.
Service tag
The service tag, affixed to the bottom of the computer, provides information that may be needed
when troubleshooting system problems. The service tag provides the following information:
(1) Product name: This is the product name affixed to the front of the computer.
(2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
(3) Part number/Product number (p/n): This number provides specific information about the product's
hardware components. The part number helps a service technician to determine what components
and parts are needed.
(4) Model description: This is the alphanumeric identifier used to locate documents, drivers, and
support for the computer.
(5) Warranty period: Describes the duration of the warranty period for this computer.
40
Chapter 4 Removal and replacement procedures
Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare
part number 535793-001 . There are 7 rubber feet that attach to the base enclosure in the locations
illustrated below.
Component replacement procedures
41
Battery
Description
Spare part number
8-cell, 63-Wh Li-ion battery
535753-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface, with the battery bay toward you.
2.
Slide the battery release latches (1) to release the battery.
3.
Remove the battery (2) from the computer.
Install the battery by inserting it into the battery bay until you hear a click.
42
Chapter 4 Removal and replacement procedures
Switch cover and keyboard
Description
Spare part number
Switch cover
535758-001
Keyboards for use in the following countries or regions:
Arabia
535798-171
Japan
535798-291
Brazil
535798-201
Latin America
535798-161
Bulgaria
535798-261
Norway
535798-091
Czech Republic
535798-221
Portugal
535798-131
Denmark
535798-081
Russia
535798-251
Europe
535798-B31
Slovakia
535798-231
Europe A4
535798-A41
South Korea
535798-AD1
France
535798-051
Spain
535798-071
French Canada
535798-121
Sweden/Finland
535798-B71
Germany
535798-041
Switzerland
535798-BG1
Greece
535798-DJ1
Taiwan
535798-AB1
Hungary
535798-211
Thailand
535798-281
Iceland
535798-DD1
Turkey
535798-141
Israel
535798-BB1
United Kingdom
535798-031
Italy
535798-061
The United States
535798-001
Before removing the switch cover and keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
Component replacement procedures
43
Remove the switch cover and keyboard:
1.
Remove the following screws:
(1) Two screw covers and two Phillips PM2.5×3.0 screws
(2) Three Phillips PM2.0×3.0 broadhead screws
(3) Two Phillips PM2.0×3.0 screws
44
2.
Turn the computer right-side up, with the front toward you.
3.
Open the computer as far as possible.
4.
Slide the switch cover back (1) and lift it straight up (2) until it disengages from the computer.
Chapter 4 Removal and replacement procedures
5.
Remove the two PM2.5×4.5 screws that secure the keyboard to the computer.
6.
Slide the keyboard back (1), and rotate it forward (2) until it rests on the base enclosure.
7.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and
disconnect the keyboard cable (2) from the system board.
8.
Remove the keyboard.
Reverse this procedure to install the switch cover and keyboard.
Component replacement procedures
45
Memory module
NOTE: Older models use DDR2 memory, while newer models use DDR3 memory. You cannot use
model numbers to determine the type of memory a model uses.
NOTE: When adding a second memory module, be sure it is the same type and speed as the
installed memory module. DDR2 memory modules cannot be mixed with DDR3 memory modules.
Description
Spare part number
For use in models that use DDR2 memory:
2-GB (PC2-6400, 800-MHz, DDR2)
598858-001
1-GB (PC2-6400, 800-MHz, DDR2)
598861-001
For use in models that use DDR3 memory:
2-GB (PC3-10600, 1333-MHz, DDR3)
598856-001
1-GB (PC3-10600, 1333-MHz, DDR3)
598859-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the switch cover and keyboard (see Switch cover and keyboard on page 43)
Remove the memory module:
46
1.
Position the computer with the front toward you.
2.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Chapter 4 Removal and replacement procedures
3.
Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the
memory module slot.
Reverse this procedure to install a memory module.
Component replacement procedures
47
Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel.
Description
Spare part number
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
535761-001
Blu-ray ROM with LightScribe DVD±RW SuperMulti DL Drive
535759-001
DVD-ROM Drive
535760-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the switch cover and keyboard (see Switch cover and keyboard on page 43)
Remove the optical drive:
48
1.
Position the computer with the front toward you.
2.
Remove the slotted PM2.5×4.5 screw (1) that secures the optical drive to the computer.
3.
Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the
tab to the left to release the optical drive from the computer.
4.
Remove the optical drive (3) from the computer.
Chapter 4 Removal and replacement procedures
5.
If it is necessary to replace the optical drive bracket, position the optical drive with the rear
toward you.
6.
Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical
drive.
7.
Remove the optical drive bracket (2).
Reverse this procedure to reassemble and install an optical drive.
Component replacement procedures
49
Speakers
Description
Spare part number
Speaker Kit
535795-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the switch cover and keyboard (see Switch cover and keyboard on page 43).
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board and remove the speaker cable from the
clips and routing channel.
NOTE: The two speakers are connected with a single cable.
2.
Remove the four PM2.5×3.0 screws (2) that secure the speakers to the computer.
3.
Remove the speakers (3) from the computer.
Reverse this procedure to install the speakers.
50
Chapter 4 Removal and replacement procedures
Palm rest
Description
Spare part number
Palm rest (includes TouchPad)
535775-001
Before removing the palm rest, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42)
5.
Remove the switch cover and keyboard (see Switch cover and keyboard on page 43)
Remove the palm rest:
1.
Remove the three Phillips PM2.0×3.0 broadhead screws (1) from the system board.
2.
Slide the palm rest back (2), then lift and rotate the front edge until the palm rest rests on the
system board (3).
Component replacement procedures
51
3.
Release the ZIF connector (1) to which the TouchPad cable is connected, and then disconnect
the TouchPad cable (2) from the system board.
4.
Remove the palm rest.
Reverse this procedure to install the palm rest.
52
Chapter 4 Removal and replacement procedures
Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket.
Description
Spare part number
500-GB, 7200-rpm hard drive
634920-001
320-GB, 7200-rpm hard drive
603783-001
320-GB, 5400-rpm hard drive
622643-001
250-GB, 7200-rpm hard drive
538972-001
250-GB, 5400-rpm hard drive
535763-001
160-GB, 7200-rpm hard drive
577972-001
Hard Drive Hardware Kit
630891-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the switch cover and keyboard (see Switch cover and keyboard on page 43).
6.
Remove the palm rest (see Palm rest on page 51).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×4.0 screws (1) that secure the hard drive to the computer.
3.
Loosen the Phillips PM2.5×10.0 captive screw (2) that secures the hard drive to the computer.
4.
Grasp the Mylar tab (3) on the hard drive and slide the hard drive to the right to disconnect it
from the system board.
Component replacement procedures
53
5.
Remove the hard drive (4) from the hard drive bay.
6.
If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.0×4.0 hard drive
bracket screws (1) from each side of the hard drive.
7.
Lift the bracket (2) straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
54
Chapter 4 Removal and replacement procedures
Bluetooth module
NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The
Bluetooth module cable is included in the Cable Kit, spare part number 535757-001.
Description
Spare part number
Bluetooth 2.0 module
398393-002
Bluetooth 2.1 module
537921-001
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover and keyboard (see Switch cover and keyboard on page 43)
b.
Palm rest (see Palm rest on page 51)
c.
Hard drive (see Hard drive on page 53)
Remove the Bluetooth module:
1.
Disconnect the Bluetooth module cable (1) from the system board.
2.
Remove the Bluetooth module cable (2) from the routing path.
3.
Remove the Bluetooth module from the clip (3) that secures it to the base enclosure.
Component replacement procedures
55
Reverse this procedure to install the Bluetooth module.
WLAN module
Description
Spare part number
Broadcom 4322 802.11a/b/g/n WLAN modules:
●
Broadcom 4322 802.11a/b/g/n WLAN module for use in Antigua and Barbuda, Barbados,
Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the U.S.
Virgin Islands, and the United States
504664-001
●
Broadcom 4322 802.11a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin,
Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin
Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central
African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the
Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the
Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau,
Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory
Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon,
Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius,
Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia,
Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the
Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa,
San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra
Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South
Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines,
Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga,
Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United
Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
504664-002
Broadcom 802.11/b/g WLAN modules:
●
56
Broadcom 4312 802.11/b/g WLAN module for use in Antigua and Barbuda, Barbados,
Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the U.S.
Virgin Islands, and the United States
Chapter 4 Removal and replacement procedures
504593-003
Description
Spare part number
●
504593-004
Broadcom 4312 802.11/b/g WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the
Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda,
Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei,
Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic,
Chad, Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic,
East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji,
Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast,
Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway,
Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines,
Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino,
Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea,
Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and
Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
Intel Wi-Fi Link 5100 802.11a/b/g WLAN modules:
●
Intel Wi-Fi Link 5100 802.11a/b/g/n WLAN module for use in all countries and regions
480985-001
●
Intel Wi-Fi Link 5100 802.11a/b/g WLAN module for use in Russia and the Ukraine
482957-001
Atheros 9285G 802.11b/g/n WiFi Adapter WLAN modules:
●
Atheros 9285G 802.11b/g/n WiFi Adapter WLAN module for use in Antigua and Barbuda,
Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago,
the U.S. Virgin Islands, and the United States
580101-001
●
Atheros 9285G 802.11b/g/n WiFi Adapter WLAN module for use in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium,
Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the
British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the
Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia,
Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, GuineaBissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy,
the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar,
Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania,
Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua,
Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles,
Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa,
South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the
Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania,
Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda,
Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
580101-002
Component replacement procedures
57
Description
Spare part number
Intel Wi-Fi Link 1000, 802.11b/g/n WLAN modules:
●
Intel Wi-Fi Link 1000, 802.11b/g/n WLAN module for use in Andorra, Antigua and Barbuda,
Argentina, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Barbados, Belgium, Bolivia,
Bosnia and Herzegovina, Brazil, Brunei, Bulgaria, Canada, Cayman Islands, Chile, China,
Colombia, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, the Dominican
Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, French Guiana,
Guadeloupe, Guam, Georgia, Germany, Ghana, Greece, Guatemala, Haiti, Honduras, Hong
Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan,
Jordan, Kenya, Kuwait, Kyrgyzstan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg,
Malawi, Malaysia, Malta, Martinique, Mauritius, Mexico, Monaco, Montenegro, Morocco, the
Nether Antilles, the Netherlands, New Zealand, Nicaragua, Nigeria, Oman, Pakistan,
Panama, Paraguay, Peru, the Philippines, Poland, Portugal, Puerto Rico, Quatar, Romania,
San Marino, Saudi Arabia, Senegal, Singapore, Slovakia, Slovenia, South Africa, South
Korea, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Tanzania, Thailand, Trinidad and
Tobago, Turkey, United Arab Emirates, the United Kingdom, the United States, Uruguay, the
U.S. Virgin Islands, Venezuela, and Vietnam
572520-001
●
Intel Wi-Fi Link 1000, 802.11b/g WLAN module for use in Russia and the Ukraine
585984-001
Broadcom 43224AGN 802.11a/b/g/n 2x2 WiFi Adapter WLAN modules:
●
Broadcom 43224AGN 802.11a/b/g/n 2x2 WiFi Adapter WLAN module for use in Antigua and
Barbuda, Aruba, the Bahamas, Barbados, Belize, Canada, Guam, Guinea, Haiti, Jamaica,
the Nether Antilles, Puerto Rico, St. Kitts and Nevis, St. Lucia, St. Vincent and the
Grenadines, Suriname, the United States, and the U.S. Virgin Islands
582564-001
●
Broadcom 43224AGN 802.11a/b/g/n 2x2 WiFi Adapter WLAN module for use in Afghanistan,
Albania, Algeria, Andorra, Angola, Argentina, Armenia, Australia, Austria, Azerbaijan,
Bahrain, Belarus, Belgium, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina,
Botswana, Brazil, British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia,
Cameroon, Cape Verde, Cayman Islands, the Central African Republic, Chad, Chile, the
People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus,
the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor,
Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland,
France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guatemala, Guinea-Bissau, Guyana, Honduras, Hong Kong,
Hungary, Iceland, India, Ireland, Italy, the Ivory Coast, Japan, Jordan, Kazakhstan, Kenya,
Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein,
Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali,
Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Netherlands,
New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New
Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova,
Romania, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal,
Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, Swaziland, Sweden, Switzerland,
Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, the United Arab Emirates, the United Kingdom, Uruguay,
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
582564-002
Before removing the WLAN module, follow these steps:
58
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Chapter 4 Removal and replacement procedures
4.
Remove the battery (see Battery on page 42).
5.
Remove the switch cover and keyboard (see Switch cover and keyboard on page 43)
6.
Remove the palm rest (see Palm rest on page 51).
Remove the WLAN module:
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless
module authorized for use in the computer by the governmental agency that regulates wireless
devices in your country or region. If you replace the module and then receive a warning message,
remove the module to restore computer functionality, and then contact technical support through Help
and Support.
1.
Position the computer with the front toward you.
2.
Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE: The black WLAN antenna cable is connected to the WLAN module “Main” terminal.
The white WLAN antenna cable is connected to the WLAN module “Aux” terminal.
3.
Remove the two Phillips PM2.5×3.0 screws (2) that secure the WLAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
4.
Remove the WLAN module (3) by sliding the module away from the slot at an angle.
NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion into the
WLAN module slot.
Reverse this procedure to install the WLAN module.
Component replacement procedures
59
Display assembly
NOTE:
All display assembly spare part kits include 2 WLAN antenna transceivers and cables.
Description
Spare part number
17.3-inch, HD+ BrightView display assembly with camera
535777-001
17.3-inch, HD+ BrightView display assembly
535779-001
17.3-inch, HD+ display assembly with camera
535778-001
17.3-inch, HD+ display assembly
535776-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover (see Switch cover and keyboard on page 43)
b.
Keyboard (see Switch cover and keyboard on page 43)
c.
Speakers (see Speakers on page 50)
d.
Palm rest (see Palm rest on page 51)
Remove the display cable:
60
1.
Turn the computer right-side up, with the front toward you.
2.
Open the computer as far as possible.
3.
Disconnect the display panel cable (1) from the system board.
4.
Disconnect the camera and microphone module cables (2) from the system board, and then
remove the cables from the routing path (3).
Chapter 4 Removal and replacement procedures
5.
Remove the wireless antenna cables (4) from the clips and routing channels built into the top
cover.
Remove the display assembly:
1.
Remove the six Phillips PM2.5×4.5 screws (1) that secure the display assembly to the computer,
and then lift the display assembly straight up (2) and remove it.
CAUTION: Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other computer
components.
Component replacement procedures
61
2.
If it is necessary to replace the display bezel or display hinges, remove the eight rubber screw
covers (1) and the eight Phillips PM2.5×4.5 screws (2) that secure the display bezel to the
display assembly. The rubber screw covers are available in the Rubber Kit, spare part number
535793-001.
3.
Lift the top inside edge of the display bezel (1) to detach it from the display assembly.
4.
Lift the left and right inside edges of the of display bezel (2) to carefully detach them from the
display assembly.
5.
Carefully lift the bottom inside edge of the display bezel (3) to detach it from the display
assembly.
NOTE: Make note of the routing of the display cable and the wireless antenna cable.
6.
Carefully remove the upper hinge cover clips from the lower hinge covers on the display
assembly.
CAUTION: The lower hinge covers can be damaged if care is not taken when removing the
upper hinge cover clips.
7.
62
Remove the display bezel from the display assembly (4). The display bezel is available using
spare part numbers 535770-001 (for use only with models without a webcam) and 535769-001
(for use only with models with a webcam).
Chapter 4 Removal and replacement procedures
8.
If it is necessary to replace the display hinges, remove the four Phillips PM2.5×5.0 screws (1)
that secure the display panel to the display enclosure.
9.
Remove the display panel (2).
10. Remove the four Phillips PM2.0×3.0 screws (1) that secure each display hinge to the display
panel.
NOTE: When removing or replacing the eight Phillips screws, be sure to remove or replace
them in the same sequence as the numbering found on the display hinges (1, 2, 3, 4).
11. Remove the display hinges (2). The left and right display hinges are available in the Bracket Kit,
spare part number 535772-001.
12. If it is necessary to replace the wireless antenna cables, lift the tape (1) that secures the cables
to the display enclosure. The wireless antenna cables are included in the Display Cable Kit,
spare part number 535771-001.
13. Remove the wireless antennas (2).
Component replacement procedures
63
14. Remove the wireless antenna cables (3) from the clips and routing channels built into the top
cover.
15. If it is necessary to replace the webcam, gently pull the webcam cables (1) from the clips and
routing channels (2) built into the top cover. Lift the webcam (3) to remove it. The webcam cable
is included in the Display Cable Kit, spare part number 535771-001.
64
Chapter 4 Removal and replacement procedures
16. If it is necessary to replace the microphone, lift the microphone from the clip (1) and gently pull
the microphone cable from the routing channels (2). The microphone cable is included in the
Display Cable Kit, spare part number 535771-001
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures
65
Top cover
Description
Spare part number
Top cover
535796-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover and keyboard (see Switch cover and keyboard on page 43)
b.
Memory module (see Memory module on page 46)
c.
Optical drive (see Optical drive on page 48)
d.
Speakers (see Speakers on page 50)
e.
Palm rest (see Palm rest on page 51)
f.
WLAN module (see WLAN module on page 56)
g.
Hard drive (see Hard drive on page 53)
h.
Display assembly (see Display assembly on page 60)
Remove the top cover:
1.
66
Turn the computer right-side up, with the front toward you.
Chapter 4 Removal and replacement procedures
2.
Release the ZIF connector (1) to which the power button cable is connected, and then
disconnect the cable from the system board (2).
3.
Remove the 22 top cover Torx T8M2.5×6.0 screws.
4.
Lift the front edge of the top cover from beneath the audio jacks (1) until it disengages from the
base enclosure. Then lift the top cover (2) from the base enclosure.
Reverse this procedure to install the top cover.
Component replacement procedures
67
Power button board
Description
Spare part number
Power button board (includes cable)
574493-001
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover and keyboard (see Switch cover and keyboard on page 43)
b.
Optical drive (see Optical drive on page 48)
c.
Speakers (see Speakers on page 50)
d.
Palm rest (see Palm rest on page 51)
e.
Hard drive (see Hard drive on page 53)
f.
Display assembly (see Display assembly on page 60).
g.
Top cover (see Top cover on page 66)
Remove the power button board:
68
1.
Position the top cover upside-down with the rear toward you.
2.
Lift the power button board straight up and off the top cover.
Chapter 4 Removal and replacement procedures
Reverse this procedure to install the power button board.
Modem module
Description
Spare part number
For use in all countries and regions except Australia and New Zealand
510100-001
For use only in Australia and New Zealand
510100-011
Before removing the modem module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover and keyboard (see Switch cover and keyboard on page 43)
b.
Memory module (see Memory module on page 46)
c.
Optical drive (see Optical drive on page 48)
d.
Speakers (see Speakers on page 50)
e.
Palm rest (see Palm rest on page 51)
f.
WLAN module (see WLAN module on page 56)
g.
Hard drive (see Hard drive on page 53)
h.
Display assembly (see Display assembly on page 60)
i.
Top cover (see Top cover on page 66)
Remove the modem module:
1.
Remove the two Phillips PM2.5×3.0 screws (1) that secure the modem module to the system
board.
2.
Lift the rear edge of the modem module (2) to release it from the system board.
Component replacement procedures
69
3.
Lift the tape (3) to disconnect the modem module cable (4).
4.
Remove the modem module.
Reverse this procedure to install the modem module.
70
Chapter 4 Removal and replacement procedures
USB connector module
Description
Spare part number
Cable Kit
535757-001
Before removing the USB connector module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover and keyboard (see Switch cover and keyboard on page 43)
b.
Memory module (see Memory module on page 46)
c.
Optical drive (see Optical drive on page 48)
d.
Speakers (see Speakers on page 50)
e.
Palm rest (see Palm rest on page 51)
f.
WLAN module (see WLAN module on page 56)
g.
Hard drive (see Hard drive on page 53)
h.
Display assembly (see Display assembly on page 60)
i.
Top Cover (see Top cover on page 66)
Remove the USB connector module:
1.
Disconnect the USB cable from the system board (1).
2.
Lift up the USB cable from the routing channels in the base enclosure (2).
3.
Remove the short Phillips PM2.5×3.0 screw (3) and the long Phillips PM2.5×9.0 screw (4) that
secure the USB connector module to the base enclosure.
Component replacement procedures
71
4.
Remove the USB connector module (5).
Reverse this procedure to install the USB connector module.
72
Chapter 4 Removal and replacement procedures
RTC battery
Description
Spare part number
RTC battery
449137-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover and keyboard (see Switch cover and keyboard on page 43)
b.
Memory module (see Memory module on page 46)
c.
Optical drive (see Optical drive on page 48)
d.
Speakers (see Speakers on page 50)
e.
Palm rest (see Palm rest on page 51)
f.
WLAN module (see WLAN module on page 56)
g.
Hard drive (see Hard drive on page 53)
h.
Display assembly (see Display assembly on page 60)
i.
Top cover (see Top cover on page 66)
Remove the RTC battery:
1.
Position the base enclosure, with the front toward you.
Component replacement procedures
73
2.
Remove the RTC battery from the socket on the system board.
Reverse this procedure to install the RTC battery.
74
Chapter 4 Removal and replacement procedures
Heat sink and fan
NOTE:
The heat sink spare part kit includes replacement thermal material.
Description
Spare part number
Heat sink
535767-001
Fan
535766-001001
Before removing the heat sink and fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover and keyboard (see Switch cover and keyboard on page 43)
b.
Memory module (see Memory module on page 46)
c.
Optical drive (see Optical drive on page 48)
d.
Speakers (see Speakers on page 50)
e.
Palm rest (see Palm rest on page 51)
f.
WLAN module (see WLAN module on page 56)
g.
Hard drive (see Hard drive on page 53)
h.
Display assembly (see Display assembly on page 60)
i.
Top cover (see Top cover on page 66)
Remove the heat sink and fan:
1.
Following the 1 through 7 sequence stamped into the heat sink and fan, loosen the seven
Phillips captive screws (1).
2.
Disconnect the fan cable (2) from the system board.
Component replacement procedures
75
3.
Lift the heat sink and fan from the system board (3).
4.
To remove the fan, turn the heat sink upside down and remove the three Phillips PM2.0×3.0
screws (1) that secure the fan to the heat sink.
5.
Remove the fan (2).
Reverse this procedure to install the fan.
NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the left side
of the computer.
The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is
designed to turn on automatically when high temperature conditions exist. These conditions are
affected by high external temperatures, system power consumption, power management/battery
conservation configurations, battery fast charging, and software requirements. Exhaust air is
displaced through the ventilation grill located on the left side of the computer.
76
Chapter 4 Removal and replacement procedures
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the system board (1),
(2), and (3) and the heat sink components (4), (5), and (6) and must be replaced each time the heat
sink is removed. Replacement thermal material is included with all heat sink, system board, cable,
and processor spare part kits.
RJ-45 (network) jack
NOTE:
The Cable Kit includes replacement thermal material.
Description
Spare part number
Cable Kit
535757-001
Before removing the RJ-45 (network) jack, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover and keyboard (see Switch cover and keyboard on page 43)
b.
Memory module (see Memory module on page 46)
c.
Optical drive (see Optical drive on page 48)
d.
Speakers (see Speakers on page 50)
e.
Palm rest (see Palm rest on page 51)
f.
WLAN module (see WLAN module on page 56)
g.
Hard drive (see Hard drive on page 53)
Component replacement procedures
77
h.
Display assembly (see Display assembly on page 60)
i.
Top Cover (see Top cover on page 66)
j.
Heat sink and fan (see Heat sink and fan on page 75)
Remove the RJ-45 (network) jack:
1.
Disconnect the RJ-45 (network) cable from the system board (1) and remove the tape (2) that
secures the cable to the base enclosure.
2.
Lift the RJ-45 (network) jack (3) straight up from the retention clips to remove it.
Reverse this procedure to install the RJ-45 (network) jack.
78
Chapter 4 Removal and replacement procedures
Processor
NOTE:
All processor spare part kits include replacement thermal material.
Description
Spare part number
Intel Core2 Duo processors:
T5870 (2.0 GHz, 800-MHz FSB, 2-MB L2 cache)
535835-001
T6570 (2.1 GHz, 800-MHz FSB, 2-MB L2 cache, TJ 100) (not available for Japan. Only available
with Intel WLAN or no WLAN)
513598-001
T6670 (2.2 GHz, 800-MHz FSB, 2-MB L2 cache)
572927-001
P7370 (2.0 GHz, 1066-MHz FSB, 3-MB L2 cache) (Only available with Intel WLAN)
507966-001
P7570 (2.26 GHz, 1066-MHz FSB, 3-MB L2 cache)
572930-001
P8600 (2.4 GHz, 1066-MHz FSB, 3-MB L2 cache)
507961-001
P8700 (2.53 GHz, 1066-MHz FSB, 3-MB L2 cache)
507960-001
T9400 (2.53 GHz, 1066-MHz FSB, 6-MB L2 cache, 35W)
507954-001
T9600 (2.8 GHz, 1066-MHz FSB, 6-MB L2 cache)
507952-001
Intel Pentium Dual-Core processors:
T4200 (2.0 GHz, 800-MHz FSB, 1-MB L2 cache)
513599-001
T4300 (2.16 GHz, 800-MHz FSB, 1-MB L2 cache)
572929-001
T4400 (2.20 GHz, 800-MHz FSB, 1MB L2 cache)
584296-001
Intel Celeron processors:
Intel Celeron 585 (2.16 GHz, 800-MHz FSB, 2-MB L2 cache)
519898-001
Intel Celeron 900 (2.20 GHz, 800-MHz FSB, 1-MB L2 cache)
534419-001
Intel Celeron Dual-Core processors:
T1600 (1.66 GHz, 667-MHz FSB, 1-MB L2 cache)
532324-001
T1700 (1.83-GHz, 667-MHz FSB, 1-MB L2 cache)
534084-001
T3000 (1.8-GHz, 800-MHz FSB, 1-MB L2 cache)
572926-001
T3100 (1.9-GHz, 800-MHz FSB, 1-MB L2 cache)
572925-001
Before removing the processor, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Component replacement procedures
79
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover and keyboard (see Switch cover and keyboard on page 43)
b.
Memory module (see Memory module on page 46)
c.
Optical drive (see Optical drive on page 48)
d.
Speakers (see Speakers on page 50)
e.
Palm rest (see Palm rest on page 51)
f.
Hard drive (see Hard drive on page 53)
g.
WLAN module (see WLAN module on page 56)
h.
Display assembly (see Display assembly on page 60)
i.
Top cover (see Top cover on page 66)
j.
Heat sink and fan (see Heat sink and fan on page 75)
Remove the processor:
1.
Position the base enclosure, with the front toward you.
2.
Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
3.
Lift the processor (2) straight up and remove it.
NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned
with the triangle (4) embossed on the processor socket.
Reverse this procedure to install the processor.
80
Chapter 4 Removal and replacement procedures
System board
NOTE:
All system board spare part kits include the ExpressCard assembly.
NOTE:
All system board spare part kits include replacement thermal material.
Description
Spare part number
System board for use in computers with DDR2 memory (includes replacement thermal material
and the ExpressCard assembly)
574508-001
System board for use in computers with DDR3 memory (includes replacement thermal material
and the ExpressCard assembly)
583077-001
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 42).
5.
Remove the following components:
a.
Switch cover and keyboard (see Switch cover and keyboard on page 43)
b.
Memory module (see Memory module on page 46)
c.
Optical drive (see Optical drive on page 48)
d.
Speakers (see Speakers on page 50)
e.
Palm rest (see Palm rest on page 51)
f.
Hard drive (see Hard drive on page 53)
g.
Display assembly (see Display assembly on page 60)
h.
Top cover (see Top cover on page 66)
When replacing the system board, be sure that the following components are removed or
disconnected from the defective system board and installed on the replacement system board:
●
USB connector module cable (see USB connector module on page 71)
●
Bluetooth module cable (see Bluetooth module on page 55)
●
WLAN module cable (see WLAN module on page 56)
●
RTC battery (see RTC battery on page 73)
●
Heat sink and fan (see Heat sink and fan on page 75)
Component replacement procedures
81
●
RJ-45 (network) cable (see RJ-45 (network) jack on page 77)
●
Processor (see Processor on page 79)
Remove the system board:
82
1.
Position the base enclosure, with the front toward you.
2.
Lift the power connector (1) from the retention clips in the base enclosure and remove the power
cable (2) from the routing clips.
3.
Remove the battery connector board (1).
4.
Remove the two Phillips PM2.5×3.0 screws (2) that secure the optical drive connector board to
the base enclosure.
5.
Remove the Phillips PM2.5×3.0 screw (3) that secures the system board to the base enclosure.
Chapter 4 Removal and replacement procedures
6.
Lift the right side of the system board at an angle (1) and remove the optical drive board (2).
7.
Flex the left side of the base enclosure (1) until the external monitor connector and the HDMI
connector are clear of the openings in the base enclosure.
8.
Lift the right side of the system board at an angle (2) and remove it (3) from the base enclosure.
9.
Turn the system board upside down with the rear panel toward you to disconnect the power
cable.
Reverse this procedure to install the system board.
Component replacement procedures
83
5
Computer Setup
Computer Setup in Windows Vista and Windows XP
Starting Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating
system is not working or will not load.
NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your
computer.
NOTE: An external keyboard or mouse connected to a USB port can be used with Computer Setup
only if USB legacy support is enabled.
To start Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
2.
Press f10 to enter BIOS Setup.
Using Computer Setup
Navigating and selecting in Computer Setup
The information and settings in Computer Setup are accessed from the File, Security, Diagnostics,
and System Configuration menus.
To navigate and select in Computer Setup, follow these steps:
1.
84
Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
●
To select a menu or a menu item, use the tab key and the keyboard arrow keys and then
press enter, or use a pointing device to click the item.
●
To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the
screen, or use the up arrow key or the down arrow key.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc, and
then follow the on-screen instructions.
Chapter 5 Computer Setup
NOTE: You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the
keyboard to navigate and make selections in Computer Setup.
2.
Press f10 to enter BIOS Setup.
3.
Select the File, Security, Diagnostics, or System Configuration menu.
To exit Computer Setup menus, choose one of the following methods:
●
To exit Computer Setup menus without saving your changes, click the Exit icon in the lower-left
corner of the screen, and then follow the on-screen instructions.
– or –
Use the tab key and the arrow keys to select File > Ignore changes and exit, and then press
enter.
– or –
●
To save your changes and exit Computer Setup menus, click the Save icon in the lower-left
corner of the screen, and then follow the on-screen instructions.
– or –
Use the tab key and the arrow keys to select File > Save changes and exit, and then press
enter.
Your changes go into effect when the computer restarts.
Restoring factory settings in Computer Setup
NOTE:
Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
2.
Press f10 to enter BIOS Setup.
3.
Use a pointing device or the arrow keys to select File > Restore defaults.
4.
Follow the on-screen instructions.
5.
To save your changes and exit, click the Save icon in the lower-left corner of the screen, and
then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
Your changes go into effect when the computer restarts.
NOTE: Your password settings and security settings are not changed when you restore the factory
settings.
Computer Setup menus
The menu tables in this section provide an overview of Computer Setup options.
Computer Setup in Windows Vista and Windows XP
85
NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by
your computer.
File Menu
Select
To do this
System Information
●
View identification information for the computer and the
batteries in the system.
●
View specification information for the processor, cache
and memory size, system ROM, video revision, and
keyboard controller version.
Set System Date and Time
Set or change the date and time on the computer.
Restore defaults
Replace the configuration settings in Computer Setup with
the original factory settings. (Hard drive mode, password
settings, and security settings are not changed when you
restore the factory settings.)
Ignore changes and exit
Cancel any changes entered during the current session.
Then exit and restart the computer.
Save changes and exit
Save any changes entered during the current session. Then
exit and restart the computer. Your changes go into effect
when the computer restarts.
Security menu
NOTE:
Some of the menu items listed in this section may not be supported by your computer.
Select
To do this
Setup BIOS Administrator Password
Set up a BIOS administrator password.
User Management (requires a BIOS administrator
password)
●
Create a new BIOS user account.
●
View a list of ProtectTools users.
Password Policy (requires an administrator password)
Revise password policy criteria.
HP SpareKey
Enable/disable HP SpareKey (disabled by default).
Always Prompt for HP SpareKey Enrollment
Enable/disable HP SpareKey enrollment (disabled by
default).
Allow Reset of HP ProtectTools security keys
Enable/disable reset of HP ProtectTools security keys.
Change Password
Enter, change, or delete a BIOS administrator password.
HP SpareKey Enrollment
Enroll or reset HP SpareKey, which is a set of security
questions and answers used if you forget your password.
DriveLock Passwords
●
Enable/disable DriveLock on any computer hard drive
(enabled by default).
●
Change a DriveLock user password or master
password.
NOTE: DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting) the
computer.
86
Chapter 5 Computer Setup
Select
To do this
Automatic DriveLock
Enable/disable Automatic DriveLock support.
Disk Sanitizer
Run Disk Sanitizer to destroy all existing data on the primary
hard drive or the drive in the upgrade bay.
CAUTION: If you run Disk Sanitizer, the data on the
selected drive is destroyed permanently.
System IDs
Enter a user-defined computer asset tracking number and
ownership tag.
Diagnostics menu
Select
To do this
System Diagnostics Menu
●
System Information—Displays the following information:
◦
Identification information for the computer and the
batteries in the system.
◦
Specification information for the processor, cache
and memory size, system ROM, video revision,
and keyboard controller version.
●
Start-up Test—Verifies the system components needed
for starting the computer.
●
Run-In Test—Runs a comprehensive check on system
memory.
●
Hard Disk Test—Runs a comprehensive self-test on
any hard drive in the system.
●
Error Log—Displays a log file if any errors have
occurred.
System Configuration menu
NOTE:
Some of the listed System Configuration options may not be supported by your computer.
Select
To do this
Language
Change the Computer Setup language.
Computer Setup in Windows Vista and Windows XP
87
Select
To do this
Boot Options
●
Set a Startup Menu delay (in seconds).
●
Enable/disable Custom Logo (disabled by default).
●
Enable/disable Display Diagnostic URL (enabled by
default).
●
Enable/disable CD-ROM boot (enabled by default).
●
Enable/disable SD Card boot (enabled by default).
●
Enable/disable floppy boot (enabled by default).
●
Enable/disable PXE Internal NIC boot (disabled by
default).
●
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
●
Enable/disable USB legacy support (enabled by
default). When enabled, USB legacy support allows the
following:
Device Configurations
◦
Use of a USB keyboard in Computer Setup even
when a Windows® operating system is not
running.
◦
Startup from bootable USB devices, including a
hard drive, diskette drive, or optical drive
connected by a USB port to the computer.
●
Enable/disable fan always on while connected to an AC
outlet (disabled by default).
●
Enable/disable Data Execution Prevention (select
models only; disabled by default). When enabled, the
processor can disable some virus code execution,
which helps to improve computer security.
●
SATA (Serial Advanced Technology Attachment) device
mode. The following options are available:
◦
AHCI (Advanced Host Controller Interface)
◦
IDE (Integrated Drive Electronics)
NOTE: Availability of the options above varies by
computer model.
88
Chapter 5 Computer Setup
●
Enable/disable HP QuickLook 2 (enabled by default).
●
Enable/disable Virtualization Technology (select models
only; disabled by default).
●
Enable/disable Dual-Core CPU (enabled by default).
●
Enable/Disable Unified Extensible Firmware Interface
(UEFI) mode (enabled by default).
Select
To do this
Built-In Device Options
●
Enable/disable the wireless button state (enabled by
default).
●
Enable/disable embedded WWAN device radio
(enabled by default).
●
Enable/disable embedded Bluetooth device radio
(enabled by default).
●
Enable/disable the Network Interface Controller (LAN)
(enabled by default).
●
Set the wake on LAN state. Options include the
following:
Port Options (all are enabled by default)
◦
Disabled
◦
Boot to Network (set by default)
◦
Follow Boot Order
●
Enable/disable the optical disk drive (enabled by
default).
●
Enable/disable the microphone.
●
Enable/disable a modem device (enabled by default).
●
Enable/disable the embedded WLAN device (enabled
by default).
●
Enable/disable LAN/WLAN switching (disabled by
default).
●
Enable/disable the integrated camera (select models
only; enabled by default).
NOTE:
All port options are enabled by default.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
Set Security Level
Change, view, or hide security levels for all BIOS menu
items.
Restore Security Defaults
Restore the default security settings.
Computer Setup in Windows Vista and Windows XP
89
Computer Setup in Linux
Starting Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating
system is not working or will not load.
NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your
computer.
NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to
navigate and make selections.
NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB
legacy support is enabled.
To start Computer Setup, follow these steps:
1.
Turn on or restart the computer.
2.
Before your operating system opens and while the “F10=ROM Based Setup” message is
displayed in the lower-left corner of the screen, press f10.
Using Computer Setup
Navigating and selecting in Computer Setup
The information and settings in Computer Setup are accessed from the File, Security, Diagnostics,
and System Configuration menus.
1.
Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. Because
Computer Setup is not operating system based, it does not support the TouchPad. Navigation
and selection are by keystroke:
●
To choose a menu or a menu item, use the arrow keys.
●
To select an item, press enter.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc.
●
To view navigation information, press f1.
●
To change the language, press f2.
2.
Select the File, Security, Diagnostics, or System Configuration menu.
3.
To exit Computer Setup, choose one of the following methods:
●
To exit Computer Setup without saving your preferences, use the arrow keys to select File
> Ignore Changes And Exit. Then follow the instructions on the screen.
●
To save your preferences and exit Computer Setup, use the arrow keys to select File >
Save Changes And Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
90
Chapter 5 Computer Setup
Restoring factory settings in Computer Setup
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select File > Restore Defaults, and then press enter.
3.
When the confirmation dialog box opens, press f10.
4.
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes And Exit. Then follow the instructions on the screen.
NOTE: Your password settings and security settings are not changed when you restore the factory
settings.
Computer Setup menus
The menu tables in this section provide an overview of Computer Setup options.
NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by
your computer.
File menu
Select
To do this
System information
●
View identification information for the computer.
●
View specification information for the processor, cache
and memory size, and system ROM.
Restore Defaults
Replace the configuration settings in Computer Setup with
the original factory settings. (Password settings and security
settings are not changed when you restore the factory
settings.)
Ignore Changes And Exit
Cancel any changes entered during the current session.
Then exit and restart the computer.
Save Changes And Exit
Save any changes entered during the current session. Then
exit and restart the computer. Your changes go into effect
when the computer restarts.
Security menu
Select
To do this
Setup Password
Enter, change, or delete a setup password.
Power-On Password
Enter, change, or delete a power-on password.
Password Options
●
Enable/disable stringent security.
●
Enable/disable stringent security.
Computer Setup in Linux
91
DriveLock Passwords
●
Enable/disable DriveLock on any computer hard drive.
●
Enter, change, or disable DriveLock on an optional
MultiBay hard drive.
NOTE: DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting) the
computer.
System IDs
Enter a user-defined computer asset tracking number and
ownership tag.
Disk Sanitizer
Run Disk Sanitizer to destroy all existing data on the primary
hard drive. The following options are available:
●
Fast: Runs the Disk Sanitizer erase cycle once.
●
Fast: Runs the Disk Sanitizer erase cycle once.
●
Custom: Allows you to select the desired number of
Disk Sanitizer erase cycles from a list.
CAUTION: If you run Disk Sanitizer, the data on the
primary hard drive is destroyed permanently.
Diagnostics menu
Select
To do this
HDD Self-Test Option
Memory Check
Memory Check
Run a comprehensive check on system memory.
System Configuration menu
NOTE:
92
Some of the listed System Configuration options may not be supported by your computer.
Select
To do this
Language
Change the Computer Setup language.
Chapter 5 Computer Setup
Boot options
Device Configurations
●
Set an f9, f10, and f12 delay when starting up.
●
Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
●
Enable/disable internal network adapter boot.
●
Enable/disable MultiBoot, which sets a boot order that
can include most boot devices in the system.
●
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
◦
1st boot device: USB CD-ROM
◦
2nd boot device: USB floppy
◦
3rd boot device: USB SuperDisk
◦
4th boot device: Notebook hard drive
◦
5th boot device: USB hard disk
◦
6th boot device: Network controller
●
Swap the functions of the fn key and left ctrl key.
●
Enable/disable USB legacy support. When enabled,
USB legacy support allows the following:
◦
Use of a USB keyboard in Computer Setup even
when a your operating system is not running.
◦
Startup from bootable USB devices, including a
hard drive, diskette drive, or optical drive
connected by a USB port to the computer.
●
Enable/disable BIOS DMA data transfers.
●
Enable/disable fan always on while connected to an AC
outlet.
●
Enable/disable data execution prevention.
●
Enable/disable LAN power saving mode.
●
Enable/disable SATA Native Mode.
●
Enable/disable Dual-Core CPU.
●
Enable/disable HDD translation mode.
Computer Setup in Linux
93
Built-in device options
Port options
94
Chapter 5 Computer Setup
●
Enable/disable embedded WLAN Device Radio.
●
Enable/disable embedded Bluetooth Device Radio.
●
Enable/disable Network Interface Controller (NIC)
●
Enable/disable LAN/WLAN Switching.
●
Enable/disable Wake on LAN.
●
Enable/disable the integrated camera (webcam)
●
Enable/disable USB port.
●
Enable/disable ExpressCard slot.
6
Specifications
Computer specifications
Metric
U.S.
Depth
27.0 cm
10.6 in
Width
41.06 cm
16.17 in
Height (front to rear)
3.20 to 3.68 cm
1.23 to 1.45 in
Weight (equipped with optical drive, hard drive, and battery)
3.08 kg
6.8 lbs
Dimensions
Input power
Operating voltage
18.5 V dc @ 4.74 A-90 W
Operating current
4.74 A
Temperature
Operating (not writing to optical disc)
0°C to 35°C
32°F to 95°F
Operating (writing to optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Relative humidity
Operating
10% to 90%
Nonoperating
5% to 95%
Maximum altitude (unpressurized)
Operating
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating
-15 m to 12,192 m
-50 ft to 40,000 ft
Shock
Operating
125 g, 2 ms, half-sine
Nonoperating
200 g, 2 ms, half-sine
Random vibration
Operating
0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min sweep
rate
Computer specifications
95
Metric
Nonoperating
U.S.
1.50 g zero-to-peak, 10 Hz to 500 Hz, 0.5 oct/min sweep rate
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within
this range of temperatures.
17.3-inch, HD+ display specifications
Metric
U.S.
Height
38.21 cm
15.0 in
Width
20.83 cm
8.2 in
Diagonal
43.94 cm
17.3 in
Active area
38.21 × 21.49 cm
15.04 × 8.46 in
Weight (maximum)
570 g
1.26 lbs
Number of colors
Up to 16.8 million
Contrast ratio
500:1 (min)-BV, 300:1 (min)-AG
Brightness
200 nits (typical)
Dimensions
Pixel resolution
96
LCD mode
TN
Format
1600 × 900
Active area
HD+
Backlight
LED
Total power consumption
5.3 W
Viewing angle
SVA
Chapter 6 Specifications
Hard drive specifications
500-GB
320-GB*
250-GB*
160-GB*
Height
9.5 mm
9.5 mm
9.5 mm
9.5 mm
Width
70 mm
70 mm
70 mm
70 mm
Weight
101 g
101 g
101 g
101 g
Interface type
SATA
SATA
SATA
SATA
Transfer rate
100 MB/sec
100 MB/sec
100 MB/sec
100 MB/sec
Security
ATA security
ATA security
ATA security
ATA security
Single track
3 ms
3 ms
3 ms
3 ms
Average
13 ms
13 ms
13 ms
13 ms
Maximum
24 ms
24 ms
24 ms
24 ms
Logical blocks
976,754,000
625,122,560
488,376,120
312,560,640
Disc rotational speed
5400 rpm
5400 rpm
5400 rpm
5400 rpm
Dimensions
Seek times (typical read, including setting)
Operating temperature
5°C to 55°C (41°F to 131°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive
specifications may differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
Hard drive specifications
97
DVD±RW and CD-RW SuperMulti Double-Layer Combo
Drive with LightScribe specifications
Applicable disc
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CDROM, CD-ROM XA, MIXED MODE CD, CD-I,
CD-I Bridge (Photo-CD, Video CD),
Multisession CD (Photo-CD, CD-EXTRA,
Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVDROM (DVD-5, DVD-9, DVD-10, DVD-18), DVDR, DVD-RW, DVD+R, DVD+RW. DVD-RAM
CD-R, CD-RW, DVD+R, DVD
+RW, DVD-R, DVD-RW, DVDRAM, LightScribe
Access time
CD
DVD
Random
< 150 ms
< 160 ms
Cache buffer
2 MB
Data transfer rate
98
24X CD-ROM
3,600 KB/sec
8X DVD-ROM
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8X DVD+R
10,800 KB/sec
8x-DVD+RW
10.800 KB/sec
8X DVD-R
10,800 KB/sec
6X DVD-RW
8,100 KB/sec
5X DVD-RAM
6,750 KB/sec
4X-DVD+R Dual Layer
5,400 KB/sec
4X-DVD-R Dual Layer
5,400 KB/sec
Transfer mode
Multiword DMA Mode
Chapter 6 Specifications
Blu-ray ROM with LightScribe DVD±RW SuperMulti DL
Drive specifications
Applicable disc
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CDTEXT, CD-ROM, CD-ROM XA,
MIXED MODE CD, CD-I, CD-I
Bridge (Photo-CD, Video CD),
Multisession CD (Photo-CD, CDEXTRA, Portfolio, CD-R, CDRW), CD-R, CD-RW, DVD-ROM
(DVD-5, DVD-9, DVD-10,
DVD-18), DVD-R, DVD-RW, DVD
+R, DVD+RW. DVD-RAM, BDROM, BD-R, BD-RE
CD-R, CD-RW, DVD+R, DVD+R(9), DVD+RW, DVD-R,
DVD-R(9), DVD-RW, DVD-RAM, LightScribe
Access time
CD
DVD
Blu-ray
Random
< 110 ms
< 130 ms
230 ms
Cache buffer
2 MB
Data transfer rate
24X CD-ROM
3,600 KB/sec
8X DVD
10,800 KB/sec
4X BD
1,800 KB/sec
16X CD-R
1,200 KB/sec
16X CD-RW
1,500 KB/sec
8X DVD+R
10,800 KB/sec
8X DVD+RW
10,800 KB/sec
8X DVD-R
10,800 KB/sec
8X DVD-RW
8,100 KB/sec
4X DVD+R Dual Layer
5,400 KB/sec
4X DVD-R Dual Layer
5,400 KB/sec
5X DVD-RAM
6,750 KB/sec
Transfer mode
Multiword DMA mode 2
Blu-ray ROM with LightScribe DVD±RW SuperMulti DL Drive specifications
99
DVD-ROM Drive
Applicable disc
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE
CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CDEXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVD-ROM (DVD-5, DVD-9,
DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM
Access time
CD
DVD
Random
< 110 ms
< 110 ms
Cache buffer
512 KB
Data transfer rate
CD-ROM (24X)
3600 KB/s (150 KB/s at 1X CD rate)
DVD (8X)
10,800 KB/s (1,352 KB/s at 1X DVD
rate)
Multiword DMA mode 2
16.6 MB/s
System DMA specifications
Hardware DMA
System function
DMA0
Not applicable
DMA1*
Not applicable
DMA2*
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
DMA5*
Available for ExpressCard
DMA6
Not assigned
DMA7
Not assigned
*ExpressCard controller can use DMA 1, 2, or 5.
100 Chapter 6 Specifications
System interrupt specifications
Hardware IRQ
System function
IRQ0
System timer
IRQ1
Standard 101-/102-Key or Microsoft Natural P/S2 Keyboard with HP QLB
IRQ2
Mobile Intel® 4 Series Chipset PCI Express Root Port-2A41
IRQ3
Intel® ICH9 Family PCI Express Root Port1-2940
IRQ4
Intel® ICH9 Family PCI Express Root Port2-2942
IRQ5
Intel® ICH9 Family PCI Express Root Port3-2944
IRQ6
Intel® ICH9 Family PCI Express Root Port5-2948
IRQ7
Intel® ICH9 Family PCI Express Root Port6-294A
IRQ8
ATI Mobility Radeon HD 4330
IRQ9
Intel® WiFi Link 5100 ABG
IRQ12
Synaptics PS/2 Port TouchPad
IRQ13
Numeric data processor
IRQ16
Intel® ICH9 Family USB Universal Host Controller-2937
IRQ-17
High Definition Audio Controller
IRQ-18
Intel® ICH9 Family USB Universal Host Controller-2939
IRQ-19
Intel® ICH9 Family USB Universal Host Controller-293C
IRQ-20
Intel® ICH9 Family USB Universal Host Controller-293A
IRQ-21
Intel® ICH9M-E/M SATA AHCI Controller
IRQ-22
Intel® ICH9 Family USB Universal Host Controller-2935
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.
NOTE: ExpressCards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the
serial port may assert IRQ3 or IRQ4.
System interrupt specifications 101
System I/O address specifications
I/O address (hex)
System function (shipping configuration)
000-01F
Direct memory access controller
000-CF7
PCI Bus
020-021
Programmable interrupt controller
024-025
Programmable interrupt controller
028-029
Programmable interrupt controller
02C-02D
Programmable interrupt controller
02E-02F
Motherboard resources
030-031
Programmable interrupt controller
034-035
Programmable interrupt controller
038-039
Programmable interrupt controller
03C-03D
Programmable interrupt controller
040-043
System timer
04E-04F
Motherboard resources
050-053
System timer
060-060
Standard 101-/102-Key or Microsoft Natural P/S2 Keyboard with HP QLB
061-061
Motherboard resources
062-062
Microsoft ACPI-Compliant Embedded Controller
063-063
Motherboard resources
064-064
Standard 101-/102-Key or Microsoft Natural P/S2 Keyboard with HP QLB
065-065
Motherboard resources
066-066
Microsoft ACPI-Compliant Embedded Controller
067-067
Motherboard resources
070-070
Motherboard resources
070-077
System CMOS/real time clock
080-080
Motherboard resources
081-091
Direct memory access controller
092–092
Motherboard resources
093-09F
Direct memory access controller
0A0-0A1
Programmable interrupt controller
0A4-0A5
Programmable interrupt controller
0A8-0A9
Programmable interrupt controller
0AC-0AD
Programmable interrupt controller
0B0-0B1
Programmable interrupt controller
102 Chapter 6 Specifications
I/O address (hex)
System function (shipping configuration)
0C0-0DF
Direct memory access controller
0F0-0F0
Numeric data processor
200-27F
Motherboard resources
3B0-3BB
ATI Mobility Radeon HD 4330
3B0-3BB
Mobile Intel® 4 Series Chipset PCI Express Root Port-2A41
3C0-3DF
ATI Mobility Radeon HD 4330
3C0–3DF
Mobile Intel® 4 Series Chipset PCI Express Root Port-2A41
400-47F
Motherboard resources
4D0-4D1
Programmable interrupt controller
500-57F
Motherboard resources
0D00-FFFF
PCI bus
1000-1003
Motherboard resources
1010-101F
Motherboard resources
2000-20FF
Marvelll Yukon 88E88072 PCI-E Gigabit Ethernet Controller
2000-20FF
Intel® ICH9 Family PCI Express Root Port6-294A
3000-4FFF
Intel® ICH9 Family PCI Express Root Port5-2948
5000-6FFF
Intel® ICH9 Family PCI Express Root Port3-2944
7000-70FF
ATI Mobility Radeon HD 4330
7000-70FF
Mobile Intel® 4 Series Chipset PCI Express Root Port-2A41
8000-801F
Intel® ICH9M-E/M SATA AHCI Controller
8020-803F
Intel® ICH9 Family USB Universal Host Controller-2936
8040-805F
Intel® ICH9 Family USB Universal Host Controller-2935
8060-807F
Intel® ICH9 Family USB Universal Host Controller-2934
8080-809F
Intel® ICH9 Family USB Universal Host Controller-2939
80A0-80BF
Intel® ICH9 Family USB Universal Host Controller-2938
80C0-80DF
Intel® ICH9 Family USB Universal Host Controller-2937
CF8-CFB
80E0-80E7
Intel® ICH9M-E/M SATA AHCI Controller
80E8-80EF
Intel® ICH9M-E/M SATA AHCI Controller
80F0-80F3
Intel® ICH9M-E/M SATA AHCI Controller
80F4-80F7
Intel® ICH9M-E/M SATA AHCI Controller
EF80-EF9F
Motherboard resources
FE00-FE0F
Motherboard resources
System I/O address specifications 103
I/O address (hex)
System function (shipping configuration)
FE80-FE8F
Motherboard resources
FFFF—FFFF
Motherboard resources
System memory map specifications
Memory address
System function
000A0000-000BFFFF
ATI Mobility Radeon HD 4330
000A0000-000BFFFF
Mobile Intel® 4 Series Chipset PCI Express Root Port-2A41
000A0000-000BFFFF
PCI bus
C0000000-CFFFFFFF
ATI Mobility Radeon HD 4330
C0000000-CFFFFFFF
Mobile Intel® 4 Series Chipset PCI Express Root Port-2A41
C0000000-DFFFFFFFF
PCI bus
D0000000-D00FFFFF
Intel® 82801 PCI Bridge-2448
D0100000-D0103FFF
Marvelll Yukon 88E88072 PCI-E Gigabit Ethernet Controller
D0100000-D01FFFFF
Intel® ICH9 Family PCI Express Root Port6-294A
D0200000-D41FFFFF
Intel® ICH9 Family PCI Express Root Port5-2948
D4200000-D81FFFFF
Intel® ICH9 Family PCI Express Root Port3-2944
104 Chapter 6 Specifications
7
Screw listing
This chapter provides specification and reference information for the screws and screw locks used in
the computer. All screws listed in this section are available in the Screw Kit, spare part number
535794-001.
Phillips PM2.0×3.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
21
3.0 mm
2.0 mm
5.0 mm
Where used: 2 screws that secure the optical drive bracket to the optical drive
Phillips PM2.0×3.0 screw 105
Where used: 3 screws that secure the system board to the base enclosure
106 Chapter 7 Screw listing
Where used: 8 screws that secure the display hinges to the display panel
Where used: 3 screws that secure the fan to the heat sink
Where used: 3 screws that secure the system board to the base enclosure.
Phillips PM2.0×3.0 screw 107
Where used: 2 screws that secure the top cover and battery connector board to the base enclosure
108 Chapter 7 Screw listing
Phillips PM2.5×4.5 screw
Color
Quantity
Length
Thread
Head diameter
Black
21
4.5 mm
2.5 mm
5.0 mm
Where used: 4 screws that secure the display panel to the display assembly
Where used: 2 screws that secure the keyboard to the computer
Phillips PM2.5×4.5 screw 109
Where used: 8 screws that secure the display bezel to the display enclosure
Where used: 1 screw that secures the optical drive to the computer
Where used: 6 screws that secure the display assembly to the computer.
110 Chapter 7 Screw listing
Phillips PM3.0×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
4
4.0 mm
3.0 mm
5.0 mm
Where used: 4 screws that secure the hard drive bracket to the hard drive
Phillips PM3.0×4.0 screw 111
Phillips PM2.5×3.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
11
3.0 mm
2.5 mm
5.0 mm
Where used: 2 screws that secure the WLAN module to the system board
Where used: 2 screws that secure the switch cover to the computer
112 Chapter 7 Screw listing
Where used: 2 screws that secure the modem module to the computer
Where used: 4 screws that secure the speaker assembly to the computer
Phillips PM2.5×3.0 screw 113
Where used: 1 screw that secures the USB board to the computer
114 Chapter 7 Screw listing
Phillips PM2.0×2.0 broadhead screw
Color
Quantity
Length
Thread
Head diameter
Black
2
2.0 mm
2.0 mm
6.0 mm
Where used: 2 screws that secure the button board to the switch cover
Phillips PM2.0×2.0 broadhead screw 115
Phillips PM2.0×3.0 broadhead screw
Color
Quantity
Length
Thread
Head diameter
Black
6
3.0 mm
2.0 mm
6.0 mm
Where used: 3 screws that secure the switch cover to the base enclosure
Where used: 3 screws that secure the palm rest to the computer
116 Chapter 7 Screw listing
Phillips PM2.0×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
2
4.0 mm
2.0 mm
4.5 mm
Where used: 2 silver screws that secure the hard drive to the top cover
Phillips PM2.0×4.0 screw 117
Phillips PM2.5×9.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
1
9.0 mm
2.5 mm
5.0 mm
Where used: One screw that secures the USB board to the system board
118 Chapter 7 Screw listing
Phillips PM2.5×10.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Silver
6
10.0 mm
2.5 mm
5.0 mm
Where used: 5 captive screws that secure the heat sink to the system board
Phillips PM2.5×10.0 captive screw 119
Where used: One captive screw that secures the hard drive to the computer (screw is secured to the
hard drive bracket)
120 Chapter 7 Screw listing
Phillips PM2.5×8.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
2
8.0 mm
2.5 mm
5.0 mm
Where used: 2 captive screws that secure the heat sink to the computer
Phillips PM2.5×8.0 captive screw 121
Torx T8M2.5×6.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
25
6.0 mm
2.5 mm
5.0 mm
Where used: 22 screws that secure the top cover to the base enclosure.
122 Chapter 7 Screw listing
Where used: 3 screws that secure the system board to the base enclosure.
Torx T8M2.5×6.0 screw 123
8
Backup and recovery
Backup and recovery in Windows Vista
Overview
To protect your information, use the Backup and Restore Center to back up individual files and
folders, back up your entire hard drive (select models only), or create system restore points. In case
of system failure, you can use the backup files to restore the contents of your computer.
The Backup and Restore Center provides the following options:
●
Backing up individual files and folders
●
Backing up the entire hard drive (select models only)
●
Scheduling automatic backups (select models only)
●
Creating system restore points
●
Recovering individual files
●
Restoring the computer to a previous state
●
Recovering information using recovery tools
NOTE:
For detailed instructions, perform a search for these topics in Help and Support.
NOTE: In case of system instability, HP recommends that you print the recovery procedures and
save them for later use.
Backing up your information
Recovery after a system failure is as complete as your most current backup. You should create your
initial backup immediately after software setup. As you add new software and data files, you should
continue to back up your system on a regular basis to maintain a reasonably current backup.
You can back up your information to an optional external hard drive, a network drive, or discs.
Note the following when backing up:
●
Store personal files in the Documents folder, and back it up regularly.
●
Back up templates that are stored in their associated programs.
●
Save customized settings that appear in a window, toolbar, or menu bar by taking a screen shot
of your settings. The screen shot can be a time-saver if you have to reset your preferences.
124 Chapter 8 Backup and recovery
To create a screen shot:
1.
Display the screen you want to save.
2.
Copy the screen image:
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
3.
Open a word-processing document, and then select Edit > Paste.
The screen image is added to the document.
4.
●
Save the document.
When backing up to discs, use any of the following types of discs (purchased separately): CD-R,
CD-RW, DVD+R, DVD+R DL, DVD-R, DVD-R DL, or DVD±RW. The discs you use will depend
on the type of optical drive installed in your computer.
NOTE: DVDs and DVDs with double-layer (DL) support store more information than CDs, so
using them for backup reduces the number of recovery discs required.
●
When backing up to discs, number each disc before inserting it into the optical drive of the
computer.
To create a backup using Backup and Restore Center , follow these steps:
NOTE:
Be sure that the computer is connected to AC power before you start the backup process.
NOTE: The backup process may take over an hour, depending on file size and the speed of the
computer.
1.
Select Start > All Programs > Maintenance > Backup and Restore Center.
2.
Follow the on-screen instructions to back up your entire computer (select models only) or your
files.
NOTE: Windows includes the User Account Control feature to improve the security of your
computer. You may be prompted for your permission or password for tasks such as installing
software, running utilities, or changing Windows settings. Refer to Help and Support for more
information.
Performing a recovery
In case of system failure or instability, the computer provides the following tools to recover your files:
●
Windows recovery tools: You can use the Backup and Restore Center to recover information
you have previously backed up. You can also use Windows Startup Repair to fix problems that
might prevent Windows from starting correctly.
●
f11 recovery tools: You can use the f11 recovery tools to recover your original hard drive image.
The image includes the Windows operating system and software programs installed at the
factory.
NOTE: If you are unable to boot (start up) your computer, you must purchase a Windows Vista
operating system DVD to reboot the computer and repair the operating system. For additional
information, refer to the “Using a Windows Vista operating system DVD (purchased separately)”
section in this guide.
Backup and recovery in Windows Vista 125
Using the Windows recovery tools
To recover information you previously backed up, follow these steps:
1.
Click Start > All Programs > Maintenance > Backup and Restore Center.
2.
Follow the on-screen instructions to recover your entire computer (select models only) or your
files.
NOTE: Windows includes the User Account Control feature to improve the security of your
computer. You may be prompted for your permission or password for tasks such as installing
software, running utilities, or changing Windows settings. Refer to Help and Support for more
information.
To recover your information using Startup Repair, follow these steps:
CAUTION: Using Startup Repair completely erases hard drive contents and reformats the hard
drive. All files you have created and any software installed on the computer are permanently
removed. When reformatting is complete, the recovery process restores the operating system, as well
as the drivers, software, and utilities from the backup used for recovery.
1.
If possible, back up all personal files.
2.
If possible, check for the presence of the Windows partition and the HP Recovery partition. To
find the partitions, select Start > Computer.
NOTE: If the Windows partition and the HP Recovery partition have been deleted, you must
recover your operating system and programs using the Windows Vista operating system DVD
and the Driver Recovery disc (both purchased separately). For additional information, refer to
the “Using a Windows Vista operating system DVD (purchased separately)” section in this guide.
3.
Restart the computer, and then press f8 before the Windows operating system loads.
4.
Select Repair your computer.
5.
Follow the on-screen instructions.
NOTE: For additional information on recovering information using the Windows tools, perform a
search for these topics in Help and Support.
Using f11
CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files
you have created and any software installed on the computer are permanently removed. The f11
recovery tool reinstalls the operating system and HP programs and drivers that were installed at the
factory. Software not installed at the factory must be reinstalled.
To recover the original hard drive image using f11, follow these steps:
1.
If possible, back up all personal files.
2.
If possible, check for the presence of the HP Recovery partition. To find the partition, select
Start > Computer.
NOTE: If the HP Recovery partition has been deleted, you must recover your operating system
and programs using the Windows Vista operating system DVD and the Driver Recovery disc
(both purchased separately). For additional information, refer to the “Using a Windows Vista
operating system DVD (purchased separately)” section in this guide.
126 Chapter 8 Backup and recovery
3.
Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
4.
Press f11 while the “Press <F11> for recovery” message is displayed on the screen.
5.
Follow the on-screen instructions.
Using a Windows Vista operating system DVD (purchased separately)
If you are unable to boot (start up) your computer, you must purchase a Windows Vista operating
system DVD to reboot the computer and repair the operating system. Make sure that your most
recent backup (stored on discs or on an external drive) is easily accessible. To order a Windows Vista
operating system DVD, go to http://www.hp.com/support, select your country or region, and follow the
on-screen instructions. You can also order the DVD by calling technical support. For contact
information, refer to the Worldwide Telephone Numbers booklet included with the computer.
CAUTION: Using a Windows Vista operating system DVD completely erases hard drive contents
and reformats the hard drive. All files you have created and any software installed on the computer
are permanently removed. When reformatting is complete, the recovery process helps you restore the
operating system, as well as drivers, software, and utilities.
To initiate recovery using a Windows Vista operating system DVD, follow these steps:
NOTE:
This process takes several minutes.
1.
If possible, back up all personal files.
2.
Restart the computer, and then insert the Windows Vista operating system DVD into the optical
drive before the Windows operating system loads.
3.
When prompted, press any keyboard key.
4.
Follow the on-screen instructions.
5.
Click Next.
6.
Select Repair your computer.
7.
Follow the on-screen instructions.
Backup and recovery in Windows Vista 127
Backup and recovery in Windows XP
Overview
To protect your information, use the Windows Backup utility (select models only) to back up files
and folders or create recovery points. In case of system failure, you can use the backup files to
restore your computer.
Windows provides the following options:
●
Backing up individual files and folders
●
Backing up all files and folders
●
Scheduling automatic backups
●
Creating recovery points
●
Recovering information
NOTE:
For detailed instructions, perform a search for these topics in Help and Support.
NOTE: In case of system instability, HP recommends that you print the recovery procedures and
save them for later use.
Backing up your information
Recovery after a system failure is as complete as your most current backup. You should create your
initial backup immediately after software setup. As you add new software and data files, you should
continue to back up your system on a regular basis to maintain a reasonably current backup.
You can back up individual files or folders to an optional external hard drive or to a network drive.
Note the following when backing up:
●
Store personal files in the My Documents folder, and back it up periodically.
●
Back up templates stored in their associated programs.
●
Save customized settings that appear in a window, toolbar, or menu bar by taking a screen shot
of your settings. The screen shot can be a time saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document:
a.
Display the screen you want to save.
b.
Copy the screen image:
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c.
Open a word-processing document, click Edit > Paste.
The screen image is added to the document.
d.
Save the document.
To create a backup using the Windows Backup utility , follow these steps:
128 Chapter 8 Backup and recovery
NOTE:
Be sure that the computer is connected to AC power before you start the backup process.
NOTE: The backup process may take over an hour, depending on file size and the speed of the
computer.
1.
Click Start > All Programs > Accessories > System Tools > Backup.
2.
Follow the on-screen instructions.
Performing a recovery
In case of system failure or instability, the computer provides the following tools to recover your files:
●
Windows recovery tools (select models only): You can use the Windows Backup utility to
recover information you have previously backed up.
●
Operating System and Driver Recovery discs (included with your computer):
use the discs to recover your operating system and programs installed at the factory.
You can
Recovering your information
To recover information you previously backed up, follow these steps:
1.
If possible, back up all personal files.
2.
Click Start > All Programs > Accessories > System Tools > Backup.
The Backup or Restore Wizard opens.
3.
Click Restore files and settings, and then click Next.
4.
Follow the on-screen instructions.
NOTE: For additional information on initiating a recovery in Windows, perform a search for this topic
in Help and Support.
Recovering the operating system and programs
CAUTION: The recovery process reformats and completely erases the hard drive. All files you have
created and any software installed on the computer are permanently removed. The recovery process
reinstalls the original operating system, software, and drivers. Software, drivers, and updates not
installed by HP must be manually reinstalled.
To recover your operating system and programs,
follow these steps:
1.
If possible, back up all personal files.
2.
Insert the Operating System disc into the optical drive.
3.
Shut down the computer.
4.
Turn on the computer.
5.
Follow the on-screen instructions to install the operating system.
6.
After the operating system is installed, remove the Operating System disc and insert the Driver
Recovery disc.
7.
Follow the on-screen instructions to install the drivers and programs.
Backup and recovery in Windows XP 129
9
Connector pin assignments
Audio-in (microphone)
Pin
Signal
1
Audio signal in
2
Audio signal in
3
Ground
Audio-out (headphone)
Pin
Signal
1
Audio out, left channel
2
Audio out, right channel
3
Ground
130 Chapter 9 Connector pin assignments
External monitor
Pin
Signal
1
Red analog
2
Green analog
3
Blue analog
4
Not connected
5
Ground
6
Ground analog
7
Ground analog
8
Ground analog
9
+5 VDC
10
Ground
11
Monitor detect
12
DDC 2B data
13
Horizontal sync
14
Vertical sync
15
DDC 2B clock
External monitor 131
HDMI
Pin
Signal
1
Transition minimized differential signal (TDMS) data 2+
2
Transition minimized differential signal (TDMS) data 2 shield
3
Transition minimized differential signal (TDMS) data 2-
4
Transition minimized differential signal (TDMS) data 1+
5
Transition minimized differential signal (TDMS) data 1 shield
6
Transition minimized differential signal (TDMS) data 1 shield
7
Transition minimized differential signal (TDMS) data 0+
8
Transition minimized differential signal (TDMS) data 0 shield
9
Transition minimized differential signal (TDMS) data 0-
10
Transition minimized differential signal (TDMS) Clock +
11
Transition minimized differential signal (TDMS) data clock shield
12
Transition minimized differential signal (TDMS) data clock-
13
Consumer electronics control (CEC)
14
No connect
15
Display data channel (DDC) clock
16
Display data channel (DDC) data
17
Ground
18
+5V Power
19
Hot plug detect
132 Chapter 9 Connector pin assignments
RJ-11 (modem)
Pin
Signal
1
Unused
2
Tip
3
Ring
4
Unused
5
Unused
6
Unused
RJ-11 (modem) 133
RJ-45 (network)
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
Unused
5
Unused
6
Receive -
7
Unused
8
Unused
Universal Serial Bus
Pin
Signal
1
+5 VDC
2
Data -
3
Data +
4
Ground
134 Chapter 9 Connector pin assignments
10 Power cord set requirements
The wide range input feature of the computer permits it to operate from any line voltage from 100 to
120 volts AC or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the
country or region where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or
region where the computer is used.
Requirements for all countries and regions
The requirements listed below are applicable to all countries and regions:
●
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
●
All power cord sets must be approved by an acceptable accredited agency responsible for
evaluation in the country or region where the power cord set will be used.
●
The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage
rating of 125 or 250 V AC, as required by the power system of each country or region.
●
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320
Standard Sheet C13 connector for mating with the appliance inlet on the back of the computer.
Requirements for all countries and regions 135
Requirements for specific countries and regions
Country/region
Accredited agency
Applicable note number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
The Netherlands
KEMA
1
Norway
NEMKO
1
The People's Republic of China
CCC
5
South Korea
EK
4
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
The United Kingdom
BSI
1
The United States
UL
2
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance
coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region
where it will be used.
2.
The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3.
The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall
plug must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4.
The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
5.
The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
136 Chapter 10 Power cord set requirements
11 Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general
household waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
CAUTION: The procedures in this chapter can result in damage to display components. The only
components intended for recycling purposes are the liquid crystal display (LCD) panel and the
backlight. When you remove these components, handle them carefully.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display
assembly that might require special handling at end-of-life. Disposal of mercury may be regulated
because of environmental considerations. For disposal or recycling information, contact your local
authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must
be disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this chapter are general disassembly instructions. Specific
details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary
from one computer model to another.
Battery 137
Perform the following steps to disassemble the display assembly:
1.
Remove all screw covers (1) and screws (2) that secure the display bezel to the display
assembly.
2.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of
the display bezel until the bezel disengages from the display assembly.
3.
Remove the display bezel (3).
4.
Remove all screws (1) that secure the display panel assembly to the display enclosure.
138 Chapter 11 Recycling
5.
Remove the display panel assembly (2) from the display enclosure.
6.
Turn the display panel assembly upside down.
7.
Remove all screws that secure the display panel frame to the display panel.
8.
Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the
display panel frame.
9.
Remove the display panel frame (2) from the display panel.
10. Remove the screws (1) that secure the backlight cover to the display panel.
Display 139
11. Lift the top edge of the backlight cover (2) and swing it outward.
12. Remove the backlight cover.
13. Turn the display panel right-side up.
14. Remove the backlight cables (1) from the clip (2) in the display panel.
15. Turn the display panel upside down.
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
140 Chapter 11 Recycling
16. Remove the backlight frame from the display panel.
17. Remove the backlight from the backlight frame.
18. Disconnect the display panel cable (1) from the LCD panel.
19. Remove the screws (2) that secure the LCD panel to the display rear panel.
20. Release the LCD panel (3) from the display rear panel.
21. Release the tape (4) that secures the LCD panel to the display rear panel.
Display 141
22. Remove the LCD panel.
23. Recycle the LCD panel and backlight.
142 Chapter 11 Recycling
Index
A
AC adapter, spare part
number 28
antenna, disconnecting 59
audio, product description 3
audio-in (microphone) jack
location 11
pin assignments 130
audio-out (headphone) jack
location 11
pin assignments 130
B
backing up, Windows Vista 124
backing up, Windows XP 128
Backup and Restore
Center 124, 125
base enclosure, spare part
number 22, 30
battery
location 14
removal 42
spare part number 23, 30, 42
battery bay 14
battery connector board, spare
part number 30
battery latches 14
battery light 12
BIOS administrator password 86
Blu-ray ROM with LightScribe DVD
±RW SuperMulti DL Drive
precautions 36
removal 48
spare part
number 22, 27, 30, 48
specifications 99
Bluetooth module
removal 55
spare part
number 22, 29, 31, 55
boot options 88
boot order 88
bottom components 14
built-in device options 89
button components 8
buttons
Info Center 8
power 9
QuickLook 8
TouchPad 7
C
cables, service considerations 36
caps lock light 8
chipset, product description 1
components
bottom 14
buttons 8
display 6
front 11
keys 9
left-side 13
lights 8
pointing devices 7
right-side 12
speakers 8
top 6
TouchPad 7
computer feet
locations 41
spare part number 41
Computer Setup
accessing in Linux 90
accessing in Windows 84
Diagnostics menu in Linux 92
Diagnostics menu in
Windows 87
File menu 91
File menu in Windows 86
navigating and selecting in
Linux 90
navigating and selecting in
Windows 84
restoring factory settings in
Linux 91
restoring factory settings in
Windows 85
Security menu in Linux 91
Security menu in Windows 86
System Configuration menu in
Linux 92
System Configuration menu in
Windows 87
using in Linux 90
using in Windows 84
computer specifications 95
connectors
power 12
service considerations 36
D
device configurations 88
Diagnostics menu
Linux 92
Windows 87
discs
Driver Recovery 129
Operating System 129
Disk Sanitizer 87
diskette drive
precautions 36
product description 3
display
components 6
illustrated 6
display assembly
removal 60
spare part number 31, 60
Index 143
display bezel
removal 62
spare part number 17, 31, 62
display cable kit, spare part
number 31, 64
display component recycling 137
display components 6
display enclosure, spare part
number 16, 25, 31
display hinge
removal 63
spare part number 17, 31, 63
display panel, removal 63
display specifications 96
drive light 11
DriveLock password 86
DriveLock, automatic 87
Driver Recovery disc 129
drives
boot order 88
preventing damage 36
Dual-Core CPU 88
DVD-ROM Drive
spare part number 22, 27, 48
specifications 100
DVD±RW and CD-RW SuperMulti
Double-Layer Combo Drive with
LightScribe
spare part
number 22, 27, 31, 48
specifications 98
E
electrostatic discharge 37
esc key 9
Ethernet, product description 3
Execution Disable 88
ExpressCard assembly, spare part
number 18, 33
ExpressCard slot 13
ExpressCard slot bezel,
illustrated 25
external monitor port
location 13
pin assignments 131
F
f11 recovery 126
144 Index
fan
J
jacks
audio-in 11
audio-out 11
headphone 11
microphone 11
modem (RJ-11) 12
network (RJ-45) 13
removal 75
spare part number 18, 75
feet
locations 41
spare part number 41
File menu
Linux 91
Windows 86
fn key 9
front components 11
function keys 10
G
graphics, product description
grounding equipment and
methods 39
1
H
hard disk test 87
hard drive
precautions 36
product description 2
removal 53
spare part
numbers 22, 27, 31, 32, 33
, 34, 53
specifications 97
hard drive bracket, removal 54
hard drive recovery 126
HDMI port
location 13
pin assignments 132
headphone (audio-out) jack
location 11
pin assignments 130
heat sink
removal 75
spare part number 18, 31, 75
hinge
removal 63
spare part number 17, 63
HP QuickLook 2 88
I
I/O address specifications 102
Info Center 8
internal display switch 6
interrupt specifications 101
K
key components 9
keyboard
product description 4
removal 43
spare part numbers 17, 31, 43
keypad keys 10
keys
esc 9
fn 9
function 10
keypad 10
Windows applications 9
Windows logo 9
L
language, changing in Computer
Setup 87
left-side components 13
legacy support, USB 84, 88
light components 8
lights
battery 12
caps lock 8
drive 11
optical drive 12
power 9
wireless 11
M
mass storage devices, spare part
numbers 27
Media Card Reader 11
memory map specifications 104
memory module
product description 2
removal 46
spare part number 34
spare part numbers 46
microphone (audio-in) jack
location 11
pin assignments 130
microphone, internal 6
model name 1
modem (RJ-11) jack
location 12
pin assignments 133
modem module
product description 3
removal 69
spare part number 18, 30, 69
monitor port
location 13
pin assignments 131
N
network (RJ-45) jack
location 13
O
Operating System disc 129
operating system, product
description 4
optical disk drive connector board,
spare part number 30
optical drive
bezel 25
location 12
precautions 36
product description 3
removal 48
spare part numbers 22, 27, 48
specifications 98, 99, 100
optical drive light 12
P
packing guidelines 38
palm rest
removal 51
spare part number 31, 51
panels, product description 1
passwords 86
pin assignments
audio-in (microphone)
jack 130
audio-out (headphone)
jack 130
external monitor port 131
HDMI 132
headphone (audio-out)
jack 130
microphone (audio-in)
jack 130
modem (RJ-11) jack 133
monitor port 131
network (RJ-45) jack 134
RJ-11 133
Universal Serial Bus (USB)
port 134
plastic parts 35
Plastics Kit
contents 25
spare part number 25, 31
pointing device
description 4
illustrated 7
pointing device components
TouchPad 7
TouchPad buttons 7
TouchPad scroll zone 7
port options 89
ports
external monitor 13
HDMI 13
monitor 13
product description 4
Universal Serial Bus
(USB) 12, 13
power button 9
power button board
removal 68
spare part number 68
power connector 12
power connector cable,
illustrated 26
power cord
set requirements 135
spare part number 29
spare part numbers 28
power light 9
power requirements, product
description 4
processor
product description 1
removal 79
spare part
numbers 18, 30, 79
product description
audio 3
chipset 1
diskette drive 3
Ethernet 3
external media cards 3
graphics 1
hard drives 2
keyboard 4
memory module 2
modem module 3
operating system 4
optical drives 3
panels 1
pointing device 4
ports 4
power requirements 4
processors 1
product description 4
product name 1
security 4
serviceability 5
wireless 3
product name 1
Q
QuickLook 8
R
recovery partition 126
removal/replacement
preliminaries 35
procedures 40
restore security defaults 89
restore the factory settings 86
restoring the hard drive 126
right-side components 12
RJ-11 (modem) jack
location 12
pin assignments 133
RJ-11 (modem) jack cable,
illustrated 26
RJ-45 (network) jack
location 13
pin assignments 134
removal 77
spare part number 77
RJ-45 (network) jack cable,
illustrated 26
RTC battery
removal 73
spare part number 22, 29, 73
rubber kit, spare part
number 31, 41
run-in test 87
Index 145
S
SATA (Serial Advanced
Technology Attachment) devices
AHCI (Advanced Host
Controller Interface) 88
IDE (Integrated Drive
Electronics) 88
Screw Kit
contents 105
spare part number 28, 31
screw listing 105
security cable slot 13
Security menu
Automatic DriveLock 87
change password 86
Disk Sanitizer 87
DriveLock 86
HP SpareKey 86
HP SpareKey enrollment 86
Linux 91
password policy 86
set up BIOS Administrator
password 86
System IDs 87
user management 86
Windows 86
security, product description 4
service considerations 35
service tag 15, 40
serviceability, product
description 5
set security level 89
setup utility
Diagnostics menu in Linux 92
Diagnostics menu in
Windows 87
File menu 91
File menu in Windows 86
navigating and selecting in
Linux 90
navigating and selecting in
Windows 84
restoring factory settings in
Linux 91
restoring factory settings in
Windows 85
Security menu in Linux 91
Security menu in Windows 86
146 Index
System Configuration menu in
Linux 92
System Configuration menu in
Windows 87
speaker kit
spare part number 31
speakers
location 8
removal 50
spare part number 18, 50
specifications
Blu-ray ROM with LightScribe
DVD±RW SuperMulti DL
Drive 99
computer 95
display 96
DVD-ROM Drive 100
DVD±RW and CD-RW
SuperMulti Double-Layer
Combo Drive with
LightScribe 98
hard drive 97
I/O addresses 102
interrupts 101
memory map 104
optical drive 98, 99, 100
system DMA 100
start-up test 87
static-shielding materials 39
switch cover
removal 43
spare part number 17, 30, 43
switches
internal display 6
wireless 11
system board
removal 81
spare part number 18, 33, 81
System Configuration menu
Linux 92
Windows 87
system date and time 86
System Diagnostics menu 87
system DMA 100
system fan 88
system IDs 87
system information 86
system memory map 104
T
thermal material, replacement 77
tools required 35
top components 6
top cover
removal 66
spare part number 18, 31, 66
TouchPad 7
TouchPad buttons 7
TouchPad cable, illustrated 26
TouchPad scroll zone 7
transporting guidelines 38
U
Unified Extensible Firmware
Interface (UEFI) mode 88
USB cable, illustrated 26
USB connector and cable, spare
part number 22
USB connector module,
removal 71
USB legacy support 84, 88
USB port
location 13
pin assignments 134
USB port, location 12
V
vents 13
Virtualization Technology 88
W
webcam module, spare part
number 31
Windows applications key 9
Windows Backup utility 128, 129
Windows logo key 9
Windows recovery 125, 129
Windows Vista operating system
DVD 127
wireless light 11
wireless switch 11
wireless, product description 3
WLAN antennas
disconnecting 59
location 6
WLAN module
removal 56
spare part numbers 19, 56
workstation guidelines 38