HP Pavilion 403 System information

HP Pavilion dv7 Entertainment PC
Maintenance and Service Guide
© Copyright 2010 Hewlett-Packard
Development Company, L.P.
Bluetooth is a trademark owned by its
proprietor and used by HewlettPackard Company under license. Intel and
Core are trademarks of Intel Corporation in
the U.S. and other countries. Microsoft,
Windows, and Windows Vista are
U.S. registered trademarks of
Microsoft Corporation. SD Logo is a
trademark of its proprietor.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
Second Edition: August 2010
First Edition: April 2010
Document Part Number: 597856-001
Revision A
Revision history
Revision
Publication date
Description
A
August 2010
●
●
ENWW
Chapter 1 — added new
descriptions for the following
components:
◦
Hard drive
◦
Processor
◦
WLAN module
Chapter 3 and Chapter 4 —
added new spare part numbers
and descriptions for the following
components:
◦
AC adapter
◦
Blu-ray ROM with LightScribe
DVD±R/RW SuperMulti DL
Drive
◦
Hard drive
◦
Processor
◦
Remote control
◦
System board
◦
WLAN module
iii
iv
Revision history
ENWW
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a
hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer
and the AC adapter comply with the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment (IEC 60950).
ENWW
v
vi
Safety warning notice
ENWW
Table of contents
1 Product description ........................................................................................................... 1
2 Components ..................................................................................................................... 6
Top components .......................................................................................................................
TouchPad .................................................................................................................
TouchPad buttons ......................................................................................................
Lights .......................................................................................................................
6
6
7
8
Buttons and Fingerprint Reader (select models only) ....................................................... 9
Keys ...................................................................................................................... 10
Front components ................................................................................................................... 11
Right-side components ............................................................................................................ 11
Left-side components ............................................................................................................... 12
Bottom components ................................................................................................................ 13
Display components ............................................................................................................... 14
Wireless antennas (select models only) ..................................................................................... 15
Additional hardware components ............................................................................................ 16
3 Illustrated parts catalog .................................................................................................. 17
Service tag ............................................................................................................................ 18
Computer major components ................................................................................................... 19
Display assembly components ................................................................................................. 26
Flush glass display assembly spare parts .................................................................... 26
Standard display assembly spare parts ...................................................................... 27
Mass storage devices ............................................................................................................. 29
Miscellaneous parts ................................................................................................................ 30
Sequential part number listing .................................................................................................. 31
4 Removal and replacement procedures ............................................................................ 39
Preliminary replacement requirements .......................................................................................
Tools required .........................................................................................................
Service considerations .............................................................................................
Plastic parts .............................................................................................
Cables and connectors .............................................................................
ENWW
39
39
39
39
40
vii
Drive handling ......................................................................................... 40
Grounding guidelines .............................................................................................. 41
Electrostatic discharge damage .................................................................. 41
Packaging and transporting guidelines ........................................ 42
Workstation guidelines .............................................................. 42
Equipment guidelines ................................................................. 43
Component replacement procedures ........................................................................................ 44
Service tag ............................................................................................................. 44
Computer feet ......................................................................................................... 45
Battery ................................................................................................................... 46
Primary hard drive cover .......................................................................................... 47
Hard drive ............................................................................................................. 48
Secondary hard drive .............................................................................................. 50
WLAN module ........................................................................................................ 52
RTC battery ............................................................................................................ 56
Memory module ...................................................................................................... 57
Optical drive .......................................................................................................... 58
Keyboard ............................................................................................................... 60
Top cover ............................................................................................................... 62
Power button board ................................................................................................. 66
Display assembly .................................................................................................... 68
System board ......................................................................................................... 78
USB board ............................................................................................................. 81
Bluetooth module .................................................................................................... 82
Speaker assembly ................................................................................................... 84
Optical drive connector ........................................................................................... 85
Subwoofer ............................................................................................................. 86
Power connector cable ............................................................................................ 88
Fan/heat sink assembly ........................................................................................... 89
Processor ............................................................................................................... 93
5 Setup Utility (BIOS) ......................................................................................................... 95
Starting Setup Utility ............................................................................................................... 95
Using Setup Utility .................................................................................................................. 96
Changing the language of Setup Utility ...................................................................... 96
Navigating and selecting in Setup Utility .................................................................... 96
Displaying system information ................................................................................... 97
Restoring default settings in Setup Utility ..................................................................... 97
Exiting Setup Utility ................................................................................................. 98
Setup Utility menus ................................................................................................................. 98
Main menu ............................................................................................................. 98
Security menu ......................................................................................................... 98
System Configuration menu ...................................................................................... 99
viii
ENWW
Diagnostics menu .................................................................................................... 99
6 Specifications ............................................................................................................... 100
Computer specifications ........................................................................................................ 100
17.3-inch, HD+ flush glass AntiGlare display specifications ...................................................... 101
17.3-inch, HD+ BrightView display specifications .................................................................... 102
Hard drive specifications ...................................................................................................... 103
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive ................................................. 104
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe specifications ........ 105
System DMA specifications .................................................................................................... 106
System interrupt specifications (discrete) .................................................................................. 106
System interrupt specifications (switchable graphics) ................................................................. 107
System interrupt specifications (UMA) ..................................................................................... 108
System I/O address specifications .......................................................................................... 109
System memory map specifications ......................................................................................... 111
7 Backup and recovery .................................................................................................... 112
Creating recovery discs ........................................................................................................ 113
Backing up your information .................................................................................................. 114
Using Windows Backup and Restore ....................................................................... 115
Using system restore points ..................................................................................... 115
When to create restore points .................................................................. 115
Create a system restore point ................................................................... 115
Restore to a previous date and time .......................................................... 116
Performing a recovery .......................................................................................................... 116
Recovering from the recovery discs .......................................................................... 116
Recovering from the dedicated recovery partition (select models only) ......................... 117
8 Connector pin assignments ........................................................................................... 118
Audio-in (microphone) .......................................................................................................... 118
Audio-out (headphone) ......................................................................................................... 118
External monitor ................................................................................................................... 119
HDMI ................................................................................................................................. 120
RJ-45 (network) .................................................................................................................... 121
Universal Serial Bus .............................................................................................................. 121
9 Power cord set requirements ........................................................................................ 122
Requirements for all countries or regions ................................................................................. 122
Requirements for specific countries or regions .......................................................................... 123
10 Recycling .................................................................................................................... 124
Battery ................................................................................................................................ 124
ENWW
ix
Display ............................................................................................................................... 124
Index ............................................................................................................................... 130
x
ENWW
1
Product description
Category
Description
Product Name
HP Pavilion dv7 Entertainment PC
Processors
Intel® Core™ i7 processors
Intel Core i7-840QM processor with 1.86-GHz, SC turbo up to 3.2-GHz, Quad
45W (select models only)
Intel Core i7-820QM processor with 1.73-GHz, SC turbo up to 3.06-GHz, Quad
45W (select models only)
Intel Core i7-740QM processor with 1.73-GHz, SC turbo up to 2.93-GHz, Quad
45W (select models only)
Intel Core i7-720QM processor with 1.6-GHz, SC turbo up to 2.8-GHz, Dual 45W
(select models only)
Intel Core i5 processors
Intel Core i5-540M processor with 2.53-GHz, SC turbo up to 3.06-GHz, Dual 35W
Intel Core i5-520M processor with 2.4-GHz, SC turbo up to 2.93-GHz, Dual 35W
Intel Core i5-450M processor with 2.4-GHz, SC turbo, Dual 35W
Intel Core i5-430M processor with 2.26-GHz, SC turbo up to 2.53-GHz, Dual 35W
Intel Core i3 processors
Intel Core i3-370M processor with 2.4-GHz, Dual 35W
Intel Core i3-350M processor with 2.26-GHz, Dual 35W
Intel Pentium® processors
Intel Pentium P6200 2.13-GHz processor (1066-MHz, 3 MB L3 cache)
Intel Pentium P6100 2.00-GHz processor (1066-MHz, 3 MB L3 cache)
Intel Pentium P6000 processor with 1.86GHz, 1066MHz/3MB L3
ENWW
Chipset
Intel HM55 Express
Graphics
Intel HD Graphics
1
Category
Description
Switchable discrete graphics memory (select models only)
●
ATI Mobility Radeon™ HD 5650 with 1024-MB (64-MB x 16 DDR3 x
800MHz x 8 PCs)
●
ATI Mobility Radeon HD 5470 with 512-MB (64-MB × 16 DDR3 x 800MHz ×
4 PCs)
Supports Blu-ray and/or HD-DVD playback with HD Decode, DX11 support and
HDMI Support (select models only)
Panels
Memory
●
17.3-in, SVA HD+ (1600 x 900) LED BrightView
●
17.3-in, SVA HD+ (1600 x 900) LED AntiGlare
●
Flush glass panel cover support
●
Support for lighted logo on top bezel
2 customer-accessible/upgradeable SODIMM slots
DDR3, 1333-MHz
Supports dual-channel support
Supports up to 8 GB of system RAM in the following configurations
Hard drives
●
8192-MB total system memory (4096-MB × 2, dual-channel)
●
6144-MB total system memory (2048-MB × 1 + 4096-MB × 1)
●
4096-MB total system memory (2048-MB × 2, dual-channel)
●
3072-MB total system memory (2048-MB × 1 + 1024-MB × 1)
●
2048-MB total system memory (1024-MB × 2, dual-channel)
●
2048-MB total system memory (2048-MB × 1)
Supports all Serial ATA (SATA) 9.5-mm/12.5-mm, 6.35-cm (2.50-in) hard drives
Supports up to 2 hard drives
Support for solid-state drives (SSD)
Support for HP ProtectSmart Hard Drive Protection
Dual hard drive configurations:
2
Chapter 1 Product description
●
2-TB (1-TB, 5400-rpm × 2)
●
1500-GB (750-GB, 5400-rpm × 2)
●
1280-GB (640-GB, 5400-rpm × 2)
●
1000-GB (500-GB, 7200-rpm x 2)
●
640-GB (320-GB, 7200-rpm × 2)
●
500-GB (250-GB, 7200-rpm × 2)
●
160-GB SSD + 500-GB, 7200-rpm
ENWW
Category
Description
Single hard drive configurations:
Optical drives
●
1-TB, 5400-rpm, 12.5 mm
●
750-GB, 5400-rpm, 12.5 mm
●
640-GB, 5400-rpm, 9.5 mm
●
500-GB, 7200-rpm, 9.5 mm
●
320-GB, 7200-rpm, 9.5 mm
●
250-GB, 7200-rpm, 9.5 mm
●
160-GB, SSD
12.7-mm tray load
Serial ATA
Fixed (1 screw for removal)
Support for the following optical drives:
Webcam
●
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
●
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive
Low-light VGA camera
Fixed (no tilt)
Activity LED
640 × 480 by 24 frames per second
Microphone
2 omnidirectional microphones, dual-array with appropriate software (supports
beam forming, echo cancellation, and noise suppression)
Audio
HD Audio (IDT)
Dolby advance audio
Beats Audio
Integrated subwoofer (select models only)
Supports Microsoft® Premium Requirements
Pavilion-branded Altec Lansing speakers
Ethernet
Integrated 10/100/1000 network interface card (NIC)
Wireless
Integrated wireless local area network (WLAN) options by way of
wireless module:
Atheros AR9285 802.11b/g/n module
Broadcom 4312G 802.11b/g WiFi and 2070 Bluetooth 2.1+EDR Combo Adapter
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo
adapter (BT3.0+HS ready)
ENWW
3
Category
Description
Broadcom 4322 802.11a/b/g/n WLAN module
Broadcom BCM94313 802.11b/g/n WLAN module
Intel 1000 802.11b/g/n WLAN module
Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo
Adapter (BT3.0+HS ready)
External media card
5-in-1 Digital Media Reader
Digital Media Slot supports Secure Digital (SD) Memory Card, MultiMediaCard
(MMC), Secure Digital High Capacity (SDHC), Memory Stick (MS), Memory Stick
Pro (MSP), xD Picture Card (XD)
Internal media card
One half-size mini-card slot for WLAN
Ports
Audio-in (stereo microphone)
Headphone/line out
eSATA (combined with USB)
High-Definition Multimedia Interface (HDMI) v1.3 supporting 1080p and
1920x1080 at 60Hz and 1920x1200 at 60Hz DVI Mode
Hot Plug/Unplug and auto detect for correct output to wide-aspect
RJ-45 (Ethernet, includes link and activity lights)
USB 2.0 (three ports)
VGA (Dsub 15-pin)
●
1600 x 1200 external resolution at 75Hz
●
1920 x 1200 external resolution at 75Hz
AC Smart Pin adapter
Keyboard/pointing devices
17-in full-size keyboard with numeric keypad
Dura-coat, Island style
Mylar clickpad cover
Clickpad
TouchPad supports 2-way scrolling
Multitouch gestures enabled as default
Taps enabled as default
Power requirements
6-cell 2.55-Ah Li-ion battery
6-cell 2.8-Ah Li-ion battery
9-cell 2.8-Ah Li-ion battery
120-W AC adapter (select models only)
90-W AC adapter (discrete models)
4
Chapter 1 Product description
ENWW
Category
Description
65-W AC adapter (select models only)
Security
Kensington security lock
Fingerprint reader with Digital Persona software support (select models only)
Operating system
Preinstalled:
Windows® 7 Professional (32 and 64 bit)
Windows 7 Home Premium (32 and 64 bit)
Windows 7 Home Basic (32 and 64 bit)
Serviceability
AC adapter
Battery (system)
Hard drives (2)
Memory module
Optical drive
WLAN module
ENWW
5
2
Components
Top components
TouchPad
Component
Function
TouchPad
Moves the pointer and selects or activates items on the screen.
To view or change the pointing device preferences:
6
1.
Select Start > Devices and Printers.
2.
Right-click the device representing the computer.
3.
Select Mouse settings.
Chapter 2 Components
ENWW
TouchPad buttons
Item
Description
Function
1
TouchPad On/Off button
Turns the TouchPad on and off. Press and hold
the button for two seconds to turn the TouchPad
on and off.
2
Left TouchPad button
Functions like the left button on an external
mouse.
3
Right TouchPad button
Functions like the right button on an external
mouse.
To view or change pointing device preferences:
ENWW
1.
Select Start > Devices and Printers.
2.
Right-click the device representing your computer.
3.
Select Mouse settings.
Top components
7
Lights
8
Item
Description
Function
1
Caps Lock light
On—The Caps Lock is on.
2
Power light
●
On—The computer is on.
●
Flashing—The computer is in Sleep.
●
Off—The computer is off or in Hibernation.
3
Volume Mute light
Amber—The computer sound is off.
4
Wireless light
●
White—An integrated wireless device, such as a wireless
local area network (WLAN) device and/or a Bluetooth®
device, is detected.
●
Amber—No wireless devices are detected.
5
TouchPad light
Amber—The TouchPad is disabled.
6
Fingerprint Reader light
●
White—The fingerprint was read.
●
Amber—The fingerprint was not read.
Chapter 2 Components
ENWW
Buttons and Fingerprint Reader (select models only)
Item
Description
Function
1
Power button
Press the Power button to:
●
Turn on the computer.
●
Initiate Sleep.
●
Exit Sleep.
●
Exit Hibernation.
If the computer has stopped responding and Windows shutdown
procedures are ineffective, press and hold the Power button for at
least 5 seconds to shut down the computer.
For more information about the power settings, select Start >
Control Panel > System and Security > Power Options.
2
Fingerprint Reader (select models only)
Allows a fingerprint logon to Windows, instead of a password
logon.
This table describes the factory settings. For information about changing the factory settings, see Help
and Support.
ENWW
Top components
9
Keys
10
Item
Description
Function
1
esc key
Press the esc and fn keys at the same time to display system
information.
2
fn key
Press the at the same time as a function key or the esc key to
execute frequently used system functions.
3
Windows Logo key
Displays the Windows Start menu.
4
Windows Applications key
Displays a shortcut menu for items beneath the cursor.
5
Integrated numeric keypad
Functions like the keys on an external numeric keypad.
6
Function keys
Press a function key and the fn key at the same time to execute
frequently used system functions.
Chapter 2 Components
ENWW
Front components
Description
Function
Speakers
Produce sound.
Right-side components
Item
Description
Function
1
Power light
●
On—The computer is on.
●
Flashing—The computer is in Sleep.
●
Off—The computer is off or in Hibernation.
●
White—The hard disk drive is active.
●
Amber—The hard disk drive is parked.
2
ENWW
Hard Disk Drive light
3
USB ports (2)
Connect optional USB devices.
4
Optical Drive light
Flashing—Accessing the optical drive.
5
Optical drive
Reads optical discs and, on select models, writes to optical discs.
6
AC Adapter light
●
On—The computer is connected to external power.
●
Off—The computer is not connected to external power.
7
Power connector
Connects an AC adapter.
8
Security Cable slot
Connects an optional security cable. The security cable is
designed to act as a deterrent, but might not prevent the computer
from being mishandled or stolen.
Front components
11
Left-side components
Item
Description
Function
1
Vents (2)
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool internal
components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.
2
External Monitor port
Connects an external VGA monitor or projector.
3
RJ-45 (network) jack
Connects a network cable.
4
HDMI port
Connects an optional video or audio device, such as a highdefinition television, or any compatible digital or audio
component.
5
eSATA/USB port (select models only)
Connects an optional high-performance eSATA component, such
as an eSATA external hard drive, or connects an optional USB
device.
NOTE: Depending on the computer model, the computer might
include only a USB port.
12
6
USB port
Connects an optional USB device.
7
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo array
microphone, monarural microphone.
8
Audio-out (headphone) jack
Produces sound when connected to optional powered stereo
speakers, headphones, ear buds, a headset, or television audio.
9
SD card reader
Reads SD cards that are inserted into the reader.
Chapter 2 Components
ENWW
Bottom components
Item
Description
Function
1
Battery bay
Holds the battery.
2
Battery Release latch
Releases the battery from the battery bay.
3
Vents (7)
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool internal
components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.
4
Primary Hard Drive bay
Holds the primary hard drive, the memory module, and the WLAN
module (select models only).
CAUTION: To prevent an unresponsive system, replace the
wireless module with a wireless module authorized for use by the
governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a
warning message, remove the module to restore computer
functionality, and then contact technical support through Help and
Support.
5
ENWW
Integrated subwoofer
Provides superior bass sound.
Bottom components
13
Display components
14
Item
Description
Function
1
Internal microphones (2)
Record sound.
2
Webcam light
On—The webcam is in use.
3
Webcam
Records video, and captures still photographs.
Chapter 2 Components
ENWW
Wireless antennas (select models only)
On select computer models, at least two antennas (1, 2) send and receive signals from one or more
wireless devices. These antennas are not visible from the outside of the computer.
NOTE: For optimal transmission, keep the areas immediately around the antennas free from
obstructions.
To review wireless regulatory notices, see the country-specific section of the Regulatory, Safety and
Environmental Notices chapter in Help and Support.
ENWW
Wireless antennas (select models only)
15
Additional hardware components
Item
Description
Function
1
Power cord*
Connects an AC adapter to an AC outlet.
2
AC adapter
Converts AC power to DC power.
3
Battery*
Provides power when the computer is not connected to an external
power source.
* Batteries and power cords vary in appearance by region and country.
16
Chapter 2 Components
ENWW
3
ENWW
Illustrated parts catalog
17
Service tag
When ordering parts or requesting information, provide the computer serial number and model
description provided on the service tag.
(1) Product name: This is the product name affixed to the front of the computer.
(2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
(3) Part number/Product number (p/n): This number provides specific information about the product's
hardware components. The part number helps a service technician to determine what components and
parts are needed.
(4) Warranty period: This number describes the duration of the warranty period for the computer.
(5) Model description: This is the alphanumeric identifier needed to locate documents, drivers, and
support for the computer.
18
Chapter 3 Illustrated parts catalog
ENWW
Computer major components
Item
Description
(1)
17.3-in display assembly:
Spare part number
HD+ AntiGlare display assembly with webcam and 2 microphones for use on
computer models equipped with a flush glass display assembly
ENWW
605325-001
Computer major components
19
Item
Description
Spare part number
HD+ BrightView display assembly with webcam and 2 microphones for use on
computer models equipped with a standard display assembly in black
605327-001
HD+ BrightView display assembly with webcam and 2 microphones for use on
computer models equipped with a standard display assembly in silver
605324-001
HD+ Brightview display assembly with webcam and 2 microphones for use on
computer models equipped with a standard display assembly in white
609788-001
NOTE: See Display assembly components on page 26 for more information on display assembly spare part
numbers.
(2)
Keyboard (includes keyboard cable)
605344-xxx
NOTE: For a detailed list of available keyboards, see Sequential part number
listing on page 31.
(3)
Power button board (includes cable)
(4)
Top cover (includes TouchPad and TouchPad buttons):
For use only with silver computer models equipped with a fingerprint reader, and
includes a fingerprint reader board
605346-001
For use only with black computer models not equipped with a fingerprint reader
605347-001
For use only with white computer models not equipped with a fingerprint reader
609789-001
(5)
Speaker assembly
605356-001
(6)
Power connector and cable
605364-001
(7)
Fan/heat sink assembly (includes replacement thermal material):
(8)
20
605358-001
For use only with computer models equipped with graphics subsystems with UMA
memory
603690-001
For use only with computer models equipped with ATI Mobility Radeon HD 5470
graphics subsystems with discrete memory
604787-001
For use only with computer models equipped with ATI Mobility Radeon HD 5650
graphics subsystems with discrete memory
603691-001
Processor (includes replacement thermal material):
Intel Core i7-840QM processor with 1.86-GHz, SC turbo up to 3.06-GHz, Quad
45W
612260-001
Intel Core i7-820QM processor with 1.73-GHz, SC turbo up to 3.06-GHz, Quad
45W
583053-001
Intel Core i7-740QM processor with 1.73-GHz, SC turbo up to 3.06-GHz, Quad
45W
612259-001
Intel Core i7-720QM processor with 1.6-GHz, SC turbo up to 2.8-GHz, Dual 45W
586170-001
Intel Core i5-540M processor with 2.53-GHz, SC turbo up to 3.06-GHz, Dual 35W
594188-001
Intel Core i5-520M processor with 2.4-GHz, SC turbo up to 2.93-GHz, Dual 35W
594187-001
Intel Core i5-450M processor with 2.40-GHz, SC turbo up to 2.53-GHz, Dual 35W
613585-001
Chapter 3 Illustrated parts catalog
ENWW
Item
ENWW
Description
Spare part number
Intel Core i5-430M processor with 2.26-GHz, SC turbo up to 2.53-GHz, Dual 35W
597624-001
Intel Core i3-370M processor with 2.40-GHz, SC turbo up to 2.53-GHz, Dual 35W
613584-001
Intel Core i3 350M processor 2.26-GHz, Dual 35W
597623-001
Intel Pentium P6200 2.13-GHz processor (1066-MHz, 3 MB L3 cache)
625831-001
Intel Pentium P6100 2.00-GHz processor (1066-MHz, 3 MB L3 cache)
613587-001
Intel Pentium P6000 1.86-GHz processor (1066-MHz, 3 MB L3 cache)
613586-001
(9)
Optical drive connector
603680-001
(10)
USB board (includes cable)
605348-001
(11)
System board (includes replacement thermal material):
With ATI Mobility Radeon HD 6550 discrete graphics subsystem, 1-GB of dedicated
memory (Quad Core), and subwoofer v.1.2
630979-001
With ATI Mobility Radeon HD 6550 discrete graphics subsystem and 1-GB of
dedicated memory (Quad Core), but without subwoofer
630978-001
With ATI Mobility Radeon HD 6550 discrete graphics subsystem, 1-GB of dedicated
memory (Dual Core), and subwoofer v.1.2
630981-001
With ATI Mobility Radeon HD 6550 discrete graphics subsystem and 1-GB of
dedicated memory (Dual Core), but without subwoofer
630980-001
With ATI Mobility Radeon HD 6370 discrete graphics subsystem, 512-MB of
dedicated memory (Quad Core), and subwoofer v.1.2
630983-001
With ATI Mobility Radeon HD 6370 discrete graphics subsystem and 512-MB of
dedicated memory (Quad Core), but without subwoofer
630982-001
With ATI Mobility Radeon HD 6370 discrete graphics subsystem, 512-MB of
dedicated memory (Dual Core), and subwoofer v.1.2
630985-001
With ATI Mobility Radeon HD 6370 discrete graphics subsystem and 512-MB of
dedicated memory (Dual Core), but without subwoofer
630984-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem, 1-GB of dedicated
memory (Quad Core), and subwoofer v.1.1
615313-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of
dedicated memory (Quad Core), but not subwoofer
615309-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem, 1-GB of dedicated
memory (Dual Core), and subwoofer v.1.1
615314-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of
dedicated memory (Dual Core), but no subwoofer
615310-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of
dedicated memory (Quad core) and v.1.0 subwoofer
615307-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of
dedicated memory (Dual core) and v.1.0 subwoofer
615308-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of
dedicated memory (Quad core)
605320-001
Computer major components
21
Item
Description
Spare part number
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of
dedicated memory (Dual core)
605321-001
With ATI Mobility Radeon HD 5470 discrete graphics subsystem, 512-MB of
dedicated memory (Dual Core), and subwoofer v.1.1
615315-001
With ATI Mobility Radeon HD 5470 discrete graphics subsystem and 512-MB of
dedicated memory (Dual Core), but no subwoofer
615312-001
With ATI Mobility Radeon HD 5470 discrete graphics subsystem and 512-MB of
dedicated memory (Dual Core) and v.1.0 subwoofer
609787-001
With ATI Mobility Radeon HD 5470 discrete graphics subsystem and 512-MB of
dedicated memory (Dual Core)
605319-001
With Intel HM55 HD UMA graphics subsystem and shared memory and v.1.1
subwoofer
615311-001
With Intel HM55 HD UMA graphics subsystem and shared memory and v.1.0
subwoofer
605322-001
(12)
Bluetooth module cable
605323-001
(13)
RTC battery
599516-001
(14)
Optical drive (includes bezel and bracket):
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive
616978-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
605416-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
605417–001
(15)
Bluetooth module (does not include a Bluetooth module cable)
537921-001
(16)
Memory modules DDR3, 1333-MHz:
1-GB memory module
598859-001
2-GB memory module
598856-001
4-GB memory module
599092-001
(17)
Hard drive cable
605415-001
(18)
Subwoofer
605357-001
(19)
Battery:
(20)
22
6-cell, 55-Wh, 2.55-Ah Li-ion battery for use with all computer models
593554-001
6-cell, 62-Wh, 2.8-Ah Li-ion battery for use with all computer models
593562-001
9-cell, 93-Wh, 2.8-Ah Li-ion battery for use with all computer models
593550-001
WLAN module:
Chapter 3 Illustrated parts catalog
ENWW
Item
ENWW
Description
Spare part number
Atheros AR9285 802.11b/g/n module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium,
Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon,
Cayman Islands, Canada, Cape Verde, Central African Republic, Chad, Chile,
People's Republic of China, Colombia, Comoros, Congo, Costa Rica, Croatia,
Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, East
Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji,
Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau,
Guam, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia,
Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya,
Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein,
Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, Maldives,
Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia,
Nauru, Nepal, Nether Antilles, Netherlands, New Zealand, Nicaragua, Niger,
Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
Peru, Philippines, Poland, Portugal, Puerto Rico, Qatar, Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi
Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and
Nevis, St. Lucia, St. Vincent and Gren, Suriname, Swaziland, Sweden, Switzerland,
Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United
Kingdom, Uruguay, the United States, Uzbekistan, US Virgin Islands, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, Zimbabwe
605560-005
Broadcom 4312G 802.11b/g WiFi and 2070 Bluetooth 2.1+EDR Combo Adapter
619997-001
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo
adapter (BT3.0+HS ready)
600370-001
Broadcom 4322 802.11a/b/g/n WLAN module for use in Antigua and Barbuda,
Aruba, Bahamas, Barbados, Belize, Canada, Guinea, Haiti, Jamaica, Guam, Nether
Antilles, Puerto Rico, St. Kitts and Nevis, St. Lucia, St. Vincent and Grenadines,
Suriname, and the United States
582564-001
Computer major components
23
Item
24
Description
Spare part number
Broadcom 4322 802.11a/b/g/n WLAN module for use in Afghanistan, Albania,
Algeria, Andorra, Angola, Argentina, Armenia, Australia, Austria, Azerbaijan,
Bahrain, Belarus, Belgium, Benin, Bermuda, Bhutan, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei, Bulgaria, Burkina Faso,
Burundi, Cambodia, Cameroon, Cape Verde, Cayman Islands, Central African
Republic, Chad, Chile, People's Republic of China, Colombia, Comoros, Congo,
Costa Rica, Croatia, Cyprus, Czech Republic, Zaire, Denmark, Djibouti, Dominica,
Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea-Bissau, Guyana, Honduras, Hong Kong, Hungary, Iceland, India, Ireland,
Italy, Ivory Coast, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan,
Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall
Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New
Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New
Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Republic of Moldova,
Romania, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia,
Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon
Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, Swaziland, Sweden,
Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and
Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, United Arab Emirates,
United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zambia, Zimbabwe
582564-002
Broadcom BCM94313 802.11b/g/n WLAN module for use in Afghanistan,
Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia,
Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina,
Botswana, Brazil, British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad,
Cayman Islands, Chile, People's Republic of China Colombia, Comoros, Congo,
Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Djibouti, Dominica,
Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guam,
Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Iraq, Ireland, Israel, Italy, Ivory Coast, Jamaica,
Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia,
Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, Nether
Antilles, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan,
Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal,
Puerto Rico, Qatar, Republic of Moldova, Romania, Russia, Rwanda, Samoa, San
Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra
Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South
Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and Grenadines,
Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania,
Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, USA,
Uzbekistan, US Virgin Islands, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia,
Zimbabwe
593836-001
Chapter 3 Illustrated parts catalog
ENWW
Item
(21)
(22)
(23)
ENWW
Description
Spare part number
Intel 1000 802.11b/g/n WLAN module for use in Andorra, Antigua, Barbuda,
Argentina, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Barbados, Belgium,
Bolivia, Bosnia and Herzegovina, Brazil, Brunei, Bulgaria, Canada, Chile, People's
Republic of China, Colombia, Costa Rica, Croatia, Cyprus, Czech Republic,
Denmark, Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland,
France, Georgia, Germany, Ghana, Greece, Guatemala, Haiti, Honduras, Hong
Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica,
Japan, Jordan, Kenya, South Korea, Kuwait, Kyrgyzstan, Latvia, Lebanon, Nether
Antilles, Martinique, Guadeloupe, French Guiana, Cayman Islands, Bermuda, Aruba,
Puerto Rico, Guam, US Virgin Islands, Liechtenstein, Lithuania, Luxembourg, Malawi,
Malaysia, Malta, Mauritius, Mexico, Monaco, Montenegro, Morocco, Netherlands,
New Zealand, Nicaragua, Nigeria, Norway, Oman, Pakistan, Panama, Paraguay,
Peru, Philippines, Poland, Portugal, Qatar, Romania, San Marino, Saudi Arabia,
Senegal, Serbia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka,
Sweden, Switzerland, Taiwan, Tanzania, Thailand, Trinidad and Tobago, Turkey,
Ukraine, United Arab Emirates, United Kingdom, Uruguay, USA, Venezuela, Vietnam
593530-001
Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter
(BT3.0+HS ready)
602992-001
Hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab, and 4 rubber isolators):
1-TB, 5400-rpm
603788-001
750-GB, 5400-rpm
603787-001
640-GB, 5400-rpm
603785-001
500-GB, 7200-rpm
603784-001
320-GB, 7200-rpm
603783-001
250-GB, 7200-rpm
605606-001
160-GB solid-state drive (SSD)
603781-001
Hard Drive Hardware Kit (not illustrated, includes left and right bracket rails,
connector cable, Mylar cover with tab, and 4 rubber isolators)
605415-001
Base enclosure (includes rubber feet)
605345-001
Base enclosure for use with silver computer models (includes rubber feet)
615443-001
Primary hard drive cover
605360-001
Computer major components
25
Display assembly components
Flush glass display assembly spare parts
26
Item
Description
Spare part number
(1)
Display enclosure (includes wireless antenna transceivers and cables and logo LED
board and cable)
605330-001
(2)
Webcam/microphone module
603660-001
(3)
Display Hinge Kit (includes right and left hinges)
605334-001
(4)
Flush glass display assembly (includes display panel cable)
605325-001
(5)
Display Cable Kit (includes display panel cable, and Webcam cable)
605333-001
(6)
Display hinge cover
605336-001
Display Screw Kit (not illustrated)
611251-001
Chapter 3 Illustrated parts catalog
ENWW
Standard display assembly spare parts
Item
Description
(1)
Display bezel
For use in silver computer models
605340-001
For use in all other computer models
615442-001
(2)
Display hinge cover
605343-001
(3)
Display Hinge Kit (includes left and right hinges)
605342-001
(4)
Display panel (includes display panel cable)
605337-001
(5)
Webcam/microphone module
605335-001
(6)
Display Cable Kit (includes display panel cable and Webcam cable)
605333-001
(7)
Wireless antenna (select models only)
605359-001
(8)
Display enclosure
For use on silver computer models
ENWW
Spare part number
605338-001
Display assembly components
27
Item
28
Description
Spare part number
For use on white computer models
605339-001
For use on black computer models
605331-001
Display Rubber Kit (not illustrated, includes display bezel rubber screw covers)
605341-001
Display Screw Kit (not illustrated)
605332-001
Chapter 3 Illustrated parts catalog
ENWW
Mass storage devices
Item
Description
(1)
Optical drive (includes bezel and bracket)
(2)
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive
616978-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
605416-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
605417–001
Hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab, and 4 rubber isolators):
●
1-TB, 5400-rpm
603788-001
●
750-GB, 5400-rpm
603787-001
●
640-GB, 5400-rpm
603785-001
●
500-GB, 7200-rpm
603784-001
●
320-GB, 7200-rpm
603783-001
●
250-GB, 7200-rpm
605606-001
●
160-GB, SSD
603781-001
Hard Drive Hardware Kit (not illustrated, includes left and right bracket rails,
connector cable, Mylar cover with tab, and 4 rubber isolators)
ENWW
Spare part number
605415-001
Mass storage devices
29
Miscellaneous parts
Description
Spare part number
AC adapter:
120-W HP Smart AC adapter PFC RC V
613154-001
90-W HP Smart AC adapter PFC RC V
613153-001
90-W HP Smart AC adapter PFC RC V EM
613160-001
65-W HP Smart AC adapter PFC RC V
613152-001
65-W HP Smart AC adapter PFC RC V EM
613161-001
Power cord:
30
Australia and New Zealand
490371-011
Belgium, Bulgaria, the Czech Republic, Finland, France, Germany, Greece, Hungary, Iceland,
the Netherlands, northwest Africa, Norway, Poland, Portugal, Russia, Slovakia, Spain, Sweden,
and Turkey
490371-021
Asia/Pacific region, French Canada, Latin America, Thailand, and the United States
490371-001
Brazil
490371-201
Denmark
490371-081
India
490371-D61
Israel
490371-BB1
Italy
490371-061
Japan
490371-291
South Africa
490371-AR1
South Korea
490371-AD1
Switzerland
490371-111
Taiwan
490371-AB1
The United Kingdom and Hong Kong
490371-031
Full-function remote control with teletext
465541-004
Rubber feet
605644-001
DVB-T TV tuner
581222-001
Chapter 3 Illustrated parts catalog
ENWW
Description
Spare part number
DVB-T antenna
581223-001
Screw Kit
605643-001
●
Phillips PM2.5×6.5 screw
●
Phillips PM2.5×5.0 screw
●
Phillips PM2.5×4.0 screw
●
Phillips PM2.5×3.0 screw
●
Phillips PM2.5×1.5 screw
●
Phillips PM2.0×3.0 screw
●
Phillips PM2.0×1.5 screw
Sequential part number listing
ENWW
Spare part
number
Description
465541-004
Full-function remote control with teletext
490371-001
Power cord for use in the Asia/Pacific region, French Canada, Latin America, Thailand, and the United
States
490371-011
Power cord for use in Australia and New Zealand
490371-021
Power cord for use in Belgium, Bulgaria, the Czech Republic, Finland, France, Germany, Greece,
Hungary, Iceland, the Netherlands, northwest Africa, Norway, Poland, Portugal, Russia, Slovakia, Spain,
Sweden, and Turkey
490371-031
Power cord for use in the United Kingdom and Hong Kong
490371-061
Power cord for use in Italy
490371-081
Power cord for use in Denmark
490371-111
Power cord for use in Switzerland
490371-201
Power cord for use in Brazil
490371-291
Power cord for use in Japan
490371-AB1
Power cord for use in the Taiwan
490371-AD1
Power cord for use in South Korea
490371-AR1
Power cord for use in South Africa
490371-BB1
Power cord for use in Israel
490371-D61
Power cord for use in India
537921-001
Bluetooth module (does not include a Bluetooth module cable)
581222-001
TV tuner, DVB-T
Sequential part number listing
31
32
Spare part
number
Description
581223-001
Antenna, DVB-T
582564-001
Broadcom 4322 802.11a/b/g/n WLAN module for use in Antigua and Barbuda, Aruba, Bahamas,
Barbados, Belize, Canada, Guinea, Haiti, Jamaica, Guam, Nether Antilles, Puerto Rico, St. Kitts and
Nevis, St. Lucia, St. Vincent and Grenadines, Suriname, and the United States
582564-002
Broadcom 4322 802.11a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahrain, Belarus, Belgium, Benin, Bermuda,
Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Cayman Islands, Central African Republic,
Chad, Chile, People's Republic of China, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus,
Czech Republic, Zaire, Denmark, Djibouti, Dominica, Dominican Republic, East Timor, Ecuador, Egypt, El
Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, GuineaBissau, Guyana, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Italy, Ivory Coast, Japan,
Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali,
Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua,
Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines,
Poland, Portugal, Qatar, Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and
Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, Swaziland, Sweden, Switzerland,
Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, United Arab Emirates, United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zambia, Zimbabwe
583053-001
Intel Core i7 820QM processor with 1.73-GHz, SC turbo up to 3.06-GHz, Quad 45W (select models
only)
586170-001
Intel Core i7 720QM processor with 1.6-GHz, SC turbo up to 2.8-GHz, Dual 45W (select models only)
593530-001
Intel 1000 802.11b/g/n WLAN module for use in Andorra, Antigua, Barbuda, Argentina, Australia,
Austria, Azerbaijan, Bahamas, Bahrain, Barbados, Belgium, Bolivia, Bosnia and Herzegovina, Brazil,
Brunei, Bulgaria, Canada, Chile, People's Republic of China, Colombia, Costa Rica, Croatia, Cyprus,
Czech Republic, Denmark, Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France,
Georgia, Germany, Ghana, Greece, Guatemala, Haiti, Honduras, Hong Kong, Hungary, Iceland, India,
Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan, Jordan, Kenya, South Korea, Kuwait,
Kyrgyzstan, Latvia, Lebanon, Nether Antilles, Martinique, Guadeloupe, French Guiana, Cayman Islands,
Bermuda, Aruba, Puerto Rico, Guam, US Virgin Islands, Liechtenstein, Lithuania, Luxembourg, Malawi,
Malaysia, Malta, Mauritius, Mexico, Monaco, Montenegro, Morocco, Netherlands, New Zealand,
Nicaragua, Nigeria, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Poland, Portugal,
Qatar, Romania, San Marino, Saudi Arabia, Senegal, Serbia, Singapore, Slovakia, Slovenia, South
Africa, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Tanzania, Thailand, Trinidad and Tobago,
Turkey, Ukraine, United Arab Emirates, United Kingdom, Uruguay, USA, Venezuela, Vietnam
593550-001
9-cell, 93-Wh, 2.8-Ah Li-ion battery for use with all computer models
593554-001
6-cell, 55-Wh, 2.55-Ah Li-ion battery for use with all computer models
593562-001
6-cell, 62-Wh, 2.8-Ah Li-ion battery for use with all computer models
Chapter 3 Illustrated parts catalog
ENWW
ENWW
Spare part
number
Description
593836-001
Broadcom BCM94313 802.11b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas,
Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia,
Cameroon, Canada, Cape Verde, Central African Republic, Chad, Cayman Islands, Chile, People's
Republic of China Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark,
Djibouti, Dominica, Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guam, Guatemala, Guinea, Guinea-Bissau, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iraq, Ireland, Israel, Italy, Ivory Coast,
Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, Maldives,
Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, Nether Antilles,
New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New
Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Puerto Rico, Qatar, Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South
Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and Grenadines, Suriname, Swaziland,
Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago,
Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom,
Uruguay, USA, Uzbekistan, US Virgin Islands, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia,
Zimbabwe
594187-001
Intel Core i5 520M processor with 2.4-GHz, SC turbo up to 2.93-GHz, Dual 35W
594188-001
Intel Core i5 540M processor with 2.53-GH, SC turbo up to 3.06-GHz, Dual 35W
597623-001
Intel Core i3 350M processor with 2.26-GHz, Dual 35W
597624-001
Intel Core i5 430M processor with 2.26-GHz, SC turbo up to 2.53-GHz, Dual 35W
598856-001
2-GB memory module
598859-001
1-GB memory module
599092-001
4-GB memory module
599516-001
RTC battery
600370-001
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo adapter (BT3.0+HS
ready)
602992-001
Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter (BT3.0+HS ready)
603660-001
Webcam/microphone module
603680-001
Optical drive cable
603690-001
Fan/heat sink assembly for use only with computer models equipped with graphics subsystems with UMA
memory (includes replacement thermal material)
603691-001
Fan/heat sink assembly for use only with computer models equipped with graphics subsystems with
discrete memory (includes replacement thermal material)
603781-001
160-GB solid-state drive
603783-001
320-GB, 7200-rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and 4 rubber isolators)
Sequential part number listing
33
34
Spare part
number
Description
603784-001
500-GB, 7200-rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and 4 rubber isolators)
603785-001
640-GB, 5400-rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and 4 rubber isolators)
603787-001
750-GB, 5400-rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and 4 rubber isolators)
603788-001
1-TB, 5400-rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and 4 rubber isolators)
604787-001
Fan/heat sink assembly for use only with computer models equipped with discrete memory
605319-001
System board with ATI Mobility Radeon HD 5470 discrete graphics subsystem and 512-MB of dedicated
memory (Dual Core), but no subwoofer
605320-001
System board with ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of dedicated
memory (Quad core), but no subwoofer
605321-001
System board with ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of dedicated
memory (Dual core), but no subwoofer
605322-001
System board with Intel HM55 HD UMA graphics subsystem and shared memory, but no subwoofer
605323-001
Bluetooth module cable
605324-001
17.3-inch HD+ standard display assembly with webcam and 2 microphones for use in silver computers
(includes wireless antenna transceivers and cables)
605325-001
17.3-inch HD+ flush glass AntiGlare display assembly with webcam and 2 microphones for use in silver
computers
605327-001
17.3-inch HD+ standard display assembly with webcam and 2 microphones for use in black computers
605330-001
Display enclosure for use with flush glass displays in silver computers (includes wireless antenna
transceivers and cables and logo LED board and cable)
605331-001
Display enclosure for use with standard displays in black computers (includes wireless antenna
transceivers and cables and logo LED board and cable)
605332-001
Display Screw Kit
605333-001
Display Cable Kit (includes display panel cable, and Webcam cable)
605334-001
Display Hinge Kit (includes right and left hinges) for use with flush glass displays
605336-001
Display hinge cover for use with flush glass displays
605337-001
BrightView display panel (includes display panel cable)
605338-001
Display enclosure for use in silver computer models with standard displays (includes wireless antenna
transceivers and cables and logo LED board and cable)
605339-001
Display enclosure for use in white computer models with standard displays (includes wireless antenna
transceivers and cables and logo LED board and cable)
605340-001
Display bezel for use with standard displays
605341-001
Display Rubber Kit (not illustrated, includes display bezel rubber screw covers)
Chapter 3 Illustrated parts catalog
ENWW
ENWW
Spare part
number
Description
605342-001
Display Hinge Kit (includes left and right hinges) for standard displays
605343-001
Display hinge cover for standard displays
605344-001
Keyboard for use in the United States
605344-031
Keyboard for use in the United Kingdom
605344-041
Keyboard for use in Germany
605344-051
Keyboard for use in France
605344-061
Keyboard for use in Italy
605344-071
Keyboard for use in Spain
605344-121
Keyboard for use in French Canada
605344-131
Keyboard for use in Portugal
605344-141
Keyboard for use in Turkey
605344-171
Keyboard for use in Saudi Arabia
605344-211
Keyboard for use in Hungary
605344-221
Keyboard for use in the Czech Republic
605344-251
Keyboard for use in Russia
605344-281
Keyboard for use in Thailand
605344-291
Keyboard for use in Japan
605344-A41
Keyboard for use in Belgium
605344-AB1
Keyboard for use in Taiwan
605344-AD1
Keyboard for use in South Korea
605344-B31
Keyboard for use internationally
605334-BA1
Keyboard for use Slovenia
605344-BB1
Keyboard for use in white computers in Israel
605344-BG1
Keyboard for use in Switzerland
605344-DH1
Keyboard for use in Denmark, Norway, and Sweden
605344-DJ1
Keyboard for use in Greece
605345-001
Base enclosure (includes rubber feet)
605346-001
Top cover for use only with silver computer models equipped with a fingerprint reader; and includes
fingerprint reader board (includes TouchPad and TouchPad buttons)
605347-001
Top cover for use only with black computer models not equipped with a fingerprint reader
605348-001
USB board (includes cable)
605356-001
Speaker assembly
Sequential part number listing
35
36
Spare part
number
Description
605357-001
Subwoofer
605358-001
Power button board (includes cable)
605359-001
Wireless antenna
605360-001
Plastic Kit
605364-001
Power connector and cable
605415-001
Hard Drive Hardware Kit (not illustrated, includes left and right bracket rails, connector cable, Mylar cover
with tab, and 4 rubber isolators)
605416-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
605417-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive
605560-005
Atheros AR9285 802.11b/g/n module for use in Afghanistan, Albania, Algeria, Andorra, Angola,
Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia,
Cameroon, Cayman Islands, Canada, Cape Verde, Central African Republic, Chad, Chile, People's
Republic of China, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark,
Djibouti, Dominica, Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guam, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast,
Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, Maldives,
Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Nether Antilles, Netherlands,
New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New
Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Puerto Rico, Qatar, Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South
Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and Gren, Suriname, Swaziland,
Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago,
Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom,
Uruguay, the United States, Uzbekistan, US Virgin Islands, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, Zimbabwe
605606-001
250-GB, 7200-rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and 4 rubber isolators)
605643-001
Screw kit
605644-001
Rubber feet
609787-001
System board for ATI Mobility Radeon HD 5470 discrete graphics subsystem and 512-MB of dedicated
memory (Dual Core) and subwoofer v.1.0
609788-001
17.3-inch HD+ standard display assembly with webcam and 2 microphones for use in white computers
609789-001
Top cover for use only with white computer models not equipped with a fingerprint reader
611251-001
Display Screw Kit for Flush glass display
612259-001
Intel Core i7-740QM processor with 1.73-GHz, SC turbo up to 3.06-GHz, Quad 45W (includes
replacement thermal material)
Chapter 3 Illustrated parts catalog
ENWW
ENWW
Spare part
number
Description
612260-001
Intel Core i7-840QM processor with 1.86-GHz, SC turbo up to 3.06-GHz, Quad 45W (includes
replacement thermal material)
613152-001
65-W HP Smart AC adapter PFC RC V
613153-001
90-W HP Smart AC adapter PFC RC V
613154-001
120-W HP Smart AC adapter PFC RC V
613160-001
90-W HP Smart AC adapter PFC RC V EM
613161-001
65-W HP Smart AC adapter PFC RC V EM
613584-001
Intel Core i3-370M processor with 2.40-GHz, SC turbo up to 2.53-GHz, Dual 35W (includes replacement
thermal material)
613585-001
Intel Core i5-450M processor with 2.40-GHz, SC turbo up to 2.53-GHz, Dual 35W (includes replacement
thermal material)
613586-001
Intel Pentium P6000 1.86-GHz processor (1066-MHz, 3 MB L3 cache, includes replacement thermal
material)
613587-001
Intel Pentium P6100 2.00-GHz processor (1066-MHz, 3 MB L3 cache, includes replacement thermal
material)
615307-001
System board with ATI Mobility Radeon HD 5650 discrete graphics subsystem with 1-GB of dedicated
memory (Quad core) and subwoofer v.1.0 (includes replacement thermal material)
615308-001
System board with ATI Mobility Radeon HD 5650 discrete graphics subsystem with 1-GB of dedicated
memory (Dual core) and subwoofer v.1.0 (includes replacement thermal material)
615309-001
System board with ATI Mobility Radeon HD 5650 discrete graphics subsystem with 1-GB of dedicated
memory (Quad core) but no subwoofer (includes replacement thermal material)
615310-001
System board with ATI Mobility Radeon HD 5650 discrete graphics subsystem with 1-GB of dedicated
memory (Dual core) but no subwoofer (includes replacement thermal material)
615311-001
System board with Intel HM55 HD UMA graphics subsystem shared memory and v.1.1 subwoofer
(includes replacement thermal material)
615312-001
System board with ATI Mobility Radeon HD 5470 discrete graphics subsystem with 512-MB of dedicated
memory (Quad core) and subwoofer v.1.1 (includes replacement thermal material)
615313-001
System board with ATI Mobility Radeon HD 5650 discrete graphics subsystem with 1-GB of dedicated
memory (Dual core) and subwoofer v.1.1 (includes replacement thermal material)
615314-001
System board with ATI Mobility Radeon HD 5650 discrete graphics subsystem with 1-GB of dedicated
memory (Dual core) and subwoofer v.1.1 (includes replacement thermal material)
615315-001
System board with ATI Mobility Radeon HD 5470 discrete graphics subsystem with 512-MB of dedicated
memory (Dual core) and subwoofer v.1.1 (includes replacement thermal material)
615442-001
Display bezel for use on standard display assemblies
615443-001
Base enclosure (includes rubber feet) for use only with silver computer models
616978-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive
619997-001
Broadcom 4312G 802.11b/g WiFi and 2070 Bluetooth 2.1+EDR Combo Adapter
Sequential part number listing
37
38
Spare part
number
Description
625831-001
Intel Pentium P6200 2.13-GHz processor (1066-MHz, 3 MB L3 cache; includes replacement thermal
material)
630978-001
System board with ATI Mobility Radeon HD 6550 discrete graphics subsystem and 1-GB of dedicated
memory (Quad Core), but without subwoofer (includes replacement thermal material)
630979-001
System board with ATI Mobility Radeon HD 6550 discrete graphics subsystem and 1-GB of dedicated
memory (Quad Core) and subwoofer v.1.2 (includes replacement thermal material)
630980-001
System board with ATI Mobility Radeon HD 6550 discrete graphics subsystem and 1-GB of dedicated
memory (Dual Core), but without subwoofer (includes replacement thermal material)
630981-001
System board with ATI Mobility Radeon HD 6550 discrete graphics subsystem and 1-GB of dedicated
memory (Dual Core) and subwoofer v.1.2 (includes replacement thermal material)
630982-001
System board with ATI Mobility Radeon HD 6370 discrete graphics subsystem and 512-MB of dedicated
memory (Quad Core), but without subwoofer (includes replacement thermal material)
630983-001
System board with ATI Mobility Radeon HD 6370 discrete graphics subsystem and 512-MB of dedicated
memory (Quad Core) and subwoofer v.1.2 (includes replacement thermal material)
630984-001
System board with ATI Mobility Radeon HD 6370 discrete graphics subsystem and 512-MB of dedicated
memory (Dual Core), but without subwoofer (includes replacement thermal material)
630985-001
System board with ATI Mobility Radeon HD 6370 discrete graphics subsystem and 512-MB of dedicated
memory (Dual Core) and subwoofer v.1.2 (includes replacement thermal material)
Chapter 3 Illustrated parts catalog
ENWW
4
Removal and replacement
procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
●
Flat-bladed screwdriver
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use
care when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
ENWW
Preliminary replacement requirements
39
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In
all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with
extreme care; these cables tear easily.
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the
computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on, and then shut it down through the operating
system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and
be sure that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
40
Chapter 4 Removal and replacement procedures
ENWW
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some
protection, but in many cases, ESD contains enough power to alter device parameters or melt
silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
CAUTION: To prevent damage to the computer when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines described
in this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
ENWW
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Preliminary replacement requirements
41
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
●
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●
Place items on a grounded surface before removing items from their containers.
●
Always be properly grounded when touching a component or assembly.
●
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive
foam.
●
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that
mechanized equipment used for moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate
electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
42
●
Cover the workstation with approved static-shielding material.
●
Use a wrist strap connected to a properly grounded work surface and use properly grounded tools
and equipment.
●
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle
these items only at static-free workstations.
●
Avoid contact with pins, leads, or circuitry.
●
Turn off power and input signals before inserting or removing connectors or test equipment.
Chapter 4 Removal and replacement procedures
ENWW
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps
with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground,
wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors,
use alligator clips to connect a wrist strap.
●
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)
can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive strips must
be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●
Antistatic tape
●
Antistatic smocks, aprons, and sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Nonconductive foam
●
Conductive tabletop workstations with ground cords of one megohm resistance
●
Static-dissipative tables or floor mats with hard ties to the ground
●
Field service kits
●
Static awareness labels
●
Material-handling packages
●
Nonconductive plastic bags, tubes, or boxes
●
Metal tote boxes
●
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
ENWW
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Preliminary replacement requirements
43
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 78 screws, in 13 different sizes, that must be removed, replaced, or loosened
when servicing the computer. Make special note of each screw size and location during removal and
replacement.
Service tag
When ordering parts or requesting information, provide the computer serial number and model
description provided on the service tag.
(1) Product name: This is the product name affixed to the front of the computer.
(2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
(3) Part number/Product number (p/n): This number provides specific information about the product's
hardware components. The part number helps a service technician to determine what components and
parts are needed.
(4) Warranty period: This number describes the duration of the warranty period for the computer.
(5) Model description: This is the alphanumeric identifier needed to locate documents, drivers, and
support for the computer.
44
Chapter 4 Removal and replacement procedures
ENWW
Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Feet Kit, spare
part number 605644-001. There are 4 rubber feet that attach to the base enclosure in the locations
illustrated below.
ENWW
Component replacement procedures
45
Battery
Description
Spare part number
6-cell, 55-Wh, 2.55-Ah Li-ion battery for use with all computer models
593554-001
6-cell, 62-Wh, 2.8-Ah Li-ion battery for use with all computer models
593562-001
9-cell, 93-Wh, 2.8-Ah Li-ion battery for use with all computer models
593550-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface.
2.
Slide the battery release latch (1) to release the battery.
3.
Pivot the battery (2) upward and remove it from the computer (3).
To insert the battery, insert the rear edge of the battery into the battery bay and pivot the front edge of
the battery downward until it is seated. The battery release latch automatically locks the battery into
place.
46
Chapter 4 Removal and replacement procedures
ENWW
Primary hard drive cover
Description
Spare part number
Primary hard drive cover
605360-001
Before removing the primary hard drive cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the primary hard drive cover:
1.
Loosen the five Phillips PM2.5×6.0 captive screws (1) that secure the primary hard drive cover to
the computer.
2.
Lift the primary hard drive cover (2) away from the computer.
Reverse this procedure to install the primary hard drive cover.
ENWW
Component replacement procedures
47
Hard drive
NOTE: The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar
cover with tab, and 4 rubber isolators.
Description
Spare part number
1-TB, 5400-rpm
603788-001
750-GB, 5400-rpm
603787-001
640-GB, 5400-rpm
603785-001
500-GB, 7200-rpm
603784-001
320-GB, 7200-rpm
603783-001
250-GB, 7200-rpm
605606-001
160-GB solid-state drive
603781-001
Hard Drive Hardware Kit (includes left and right bracket rails, connector cable, Mylar cover with
tab, and 4 rubber isolators)
605415-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
Remove the hard drive:
1.
48
Remove the four Phillips PM2.5×3.0 screws (1).
Chapter 4 Removal and replacement procedures
ENWW
ENWW
2.
Disconnect the hard drive by sliding it to the left (2), and then remove the hard drive (3) from the
computer.
3.
If it is necessary to replace the hard drive bracket or any of the hard drive bracket components,
remove the following:
●
(1) Hard drive adapter cable
●
(2) Four rubber isolators
●
(3) Four Phillips PM3.0×3.5 screws that secure the hard drive bracket rails and Mylar cover
to the hard drive
●
(4) Left and right hard drive bracket rails with Mylar cover
Component replacement procedures
49
Reverse this procedure to install the hard drive.
Secondary hard drive
NOTE: The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar
cover with tab, and 4 rubber isolators.
Description
Spare part number
1-TB, 5400-rpm
603788-001
750-GB, 5400-rpm
603787-001
640-GB, 5400-rpm
603785-001
500-GB, 7200-rpm
603784-001
320-GB, 7200-rpm
603783-001
250-GB, 7200-rpm
605606-001
160-GB, SSD
603781-001
Before removing the hard drive, follow these steps:
50
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
Chapter 4 Removal and replacement procedures
ENWW
Remove the secondary hard drive:
1.
Remove the four hard drive screws (1).
2.
Disconnect the hard drive by sliding it to the left (2), and then remove the hard drive (3) from the
computer.
Reverse this procedure to install the secondary hard drive.
ENWW
Component replacement procedures
51
WLAN module
52
Description
Spare part number
Atheros AR9285 802.11b/g/n module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan,
Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan,
Bolivia, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cambodia, Cameroon, Cayman Islands, Canada, Cape Verde, Central
African Republic, Chad, Chile, People's Republic of China, Colombia, Comoros, Congo, Costa
Rica, Croatia, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, East
Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland,
France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guam, Guyana, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica,
Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia,
Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Nether
Antilles, Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan,
Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Puerto Rico,
Qatar, Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and
Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and
Nevis, St. Lucia, St. Vincent and Gren, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, the
United States, Uzbekistan, US Virgin Islands, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, Zimbabwe
605560-005
Broadcom 4312G 802.11b/g WiFi and 2070 Bluetooth 2.1+EDR Combo Adapter
619997-001
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo adapter
(BT3.0+HS ready)
600370-001
Broadcom 4322 802.11a/b/g/n WLAN module for use in Antigua and Barbuda, Aruba,
Bahamas, Barbados, Belize, Canada, Guinea, Haiti, Jamaica, Guam, Nether Antilles, Puerto
Rico, St. Kitts and Nevis, St. Lucia, St. Vincent and Grenadines, Suriname, and the United States
582564-001
Chapter 4 Removal and replacement procedures
ENWW
ENWW
Description
Spare part number
Broadcom 4322 802.11a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahrain, Belarus, Belgium,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, British Virgin
Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Cayman
Islands, Central African Republic, Chad, Chile, People's Republic of China, Colombia, Comoros,
Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Zaire, Denmark, Djibouti, Dominica,
Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea-Bissau, Guyana, Honduras, Hong
Kong, Hungary, Iceland, India, Ireland, Italy, Ivory Coast, Japan, Jordan, Kazakhstan, Kenya,
Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall
Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand,
Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay,
Peru, Philippines, Poland, Portugal, Qatar, Republic of Moldova, Romania, Rwanda, Samoa, San
Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri
Lanka, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga,
Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, United Arab Emirates,
United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia,
Zimbabwe
582564-002
Broadcom BCM94313 802.11b/g/n WLAN module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin,
Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands,
Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central
African Republic, Chad, Cayman Islands, Chile, People's Republic of China Colombia, Comoros,
Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia,
Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guadeloupe, Guam, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iraq, Ireland, Israel, Italy, Ivory
Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar,
Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius,
Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia,
Nauru, Nepal, Netherlands, Nether Antilles, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines,
Poland, Portugal, Puerto Rico, Qatar, Republic of Moldova, Romania, Russia, Rwanda, Samoa,
San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri
Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and Grenadines, Suriname, Swaziland, Sweden,
Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago,
Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom,
Uruguay, USA, Uzbekistan, US Virgin Islands, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, Zimbabwe
593836-001
Component replacement procedures
53
Description
Spare part number
Intel 1000 802.11b/g/n WLAN module for use in Andorra, Antigua, Barbuda, Argentina,
Australia, Austria, Azerbaijan, Bahamas, Bahrain, Barbados, Belgium, Bolivia, Bosnia and
Herzegovina, Brazil, Brunei, Bulgaria, Canada, Chile, People's Republic of China, Colombia,
Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Dominican Republic, Ecuador, Egypt, El
Salvador, Estonia, Finland, France, Georgia, Germany, Ghana, Greece, Guatemala, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast,
Jamaica, Japan, Jordan, Kenya, South Korea, Kuwait, Kyrgyzstan, Latvia, Lebanon, Nether
Antilles, Martinique, Guadeloupe, French Guiana, Cayman Islands, Bermuda, Aruba, Puerto
Rico, Guam, US Virgin Islands, Liechtenstein, Lithuania, Luxembourg, Malawi, Malaysia, Malta,
Mauritius, Mexico, Monaco, Montenegro, Morocco, Netherlands, New Zealand, Nicaragua,
Nigeria, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Poland, Portugal,
Qatar, Romania, San Marino, Saudi Arabia, Senegal, Serbia, Singapore, Slovakia, Slovenia,
South Africa, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Tanzania, Thailand, Trinidad and
Tobago, Turkey, Ukraine, United Arab Emirates, United Kingdom, Uruguay, USA, Venezuela,
Vietnam
593530-001
Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter (BT3.0+HS
ready)
602992-001
Before removing the WLAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the primary hard drive (see Hard drive on page 48).
Remove the WLAN module:
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless
module authorized for use in the computer by the governmental agency that regulates wireless devices
in your country or region. If you replace the module and then receive a warning message, remove the
module to restore computer functionality, and then contact technical support through Help and Support.
1.
Disconnect the WLAN antenna cables (1) from the WLAN module.
NOTE: The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The
white WLAN antenna cable is connected to the WLAN module “Aux” terminal.
2.
54
Remove the two Phillips PM2.5×3.5 screws (2) that secure the WLAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
Chapter 4 Removal and replacement procedures
ENWW
3.
Remove the WLAN module (3) by pulling it away from the slot.
NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion into the
WLAN module slot.
Reverse this procedure to install a WLAN module.
ENWW
Component replacement procedures
55
RTC battery
Description
Spare part number
RTC battery
599516-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
Remove the RTC battery:
▲
Remove the RTC battery from the socket on the system board.
Reverse this procedure to install the RTC battery. Be sure that the RTC battery is installed with the “+”
sign facing up.
56
Chapter 4 Removal and replacement procedures
ENWW
Memory module
Description
Spare part number
1-GB memory module
598859-001
2-GB memory module
598856-001
4-GB memory module
599092-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
Remove the memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
2.
Remove the module (2) by pulling it away from the slot at an angle.
NOTE: Memory modules are designed with a notch to prevent incorrect insertion.
Reverse this procedure to install the memory module.
ENWW
Component replacement procedures
57
Optical drive
NOTE: The optical drive spare part kit includes an optical drive bezel and bracket.
Description
Spare part number
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive
616978-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
605416-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
605417-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
Remove the optical drive:
58
1.
Position the computer with the front toward you.
2.
Remove the Phillips PM2.5×3.0 screw (1) that secures the optical drive to the computer.
Chapter 4 Removal and replacement procedures
ENWW
3.
Remove the optical drive (2).
Reverse this procedure to reassemble and install the optical drive.
ENWW
Component replacement procedures
59
Keyboard
Description
Spare part number
Keyboard (includes keyboard cable)
605344-xxx
NOTE: For a detailed list of available keyboards, see Sequential part number listing
on page 31.
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
Remove the keyboard:
60
1.
Remove the two Phillips PM2.5×6.5 screws (1) that secure the keyboard to the computer.
2.
Slide the keyboard release switch (2) (in the battery bay) to the right.
3.
Turn the computer display-side up, with the front toward you, and open the computer as far as
possible.
Chapter 4 Removal and replacement procedures
ENWW
4.
Lift (1) and release (2) the keyboard until the keyboard connector on the system board is
accessible.
5.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is connected and
disconnect the cable (2) from the system board.
Reverse this procedure to install the keyboard.
ENWW
Component replacement procedures
61
Top cover
Description
Spare part number
Top cover (includes TouchPad and TouchPad buttons) for use only with silver computer models
equipped with a fingerprint reader; and includes fingerprint reader board
605346-001
Top cover (includes TouchPad and TouchPad buttons) for use only with black computer models
not equipped with a fingerprint reader
605347-001
Top cover (includes TouchPad and TouchPad buttons) for use only with white computer models
not equipped with a fingerprint reader
609789-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the hard drive (see Hard drive on page 48).
7.
Remove the secondary hard drive (see Secondary hard drive on page 50).
8.
Remove the optical drive (see Optical drive on page 58).
9.
Remove the keyboard (see Keyboard on page 60).
Remove the top cover:
62
1.
Turn the computer display-side down, with the front toward you.
2.
Remove the following screws:
●
4 Phillips 2.5×6.5 screws (one in each corner)
●
2 Phillips 2.5×6.5 screws (left side)
●
2 Phillips 2.5×6.5 screws (front side)
●
1 Phillips 2.5×6.5 screws (center)
●
5 Phillips 2.0×1.5 screws (in battery bay)
Chapter 4 Removal and replacement procedures
ENWW
3.
ENWW
Remove the following screws:
●
3 Phillips 2.5×2.0 screws (in the optical drive bay)
●
2 Phillips 2.5×1.5 screws (in secondary hard drive bay)
●
3 Phillips 2.5×6.5 screws (battery bay)
4.
Turn the computer display-side up, with the front toward you.
5.
Open the computer as far as possible.
Component replacement procedures
63
64
6.
Remove 2 Phillips 2.5×6.5 screws (under keyboard).
7.
Disconnect the fingerprint reader ribbon cable (1), TouchPad ribbon cable (2), and power button
ribbon cable (3) from the system board.
Chapter 4 Removal and replacement procedures
ENWW
8.
Lift the top cover (1) and remove from the computer (2).
Reverse this procedure to install the top cover.
ENWW
Component replacement procedures
65
Power button board
Description
Spare part number
Power button board (includes cable)
605358-001
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the hard drive (see Primary hard drive cover on page 47).
6.
Remove the hard drive (see Hard drive on page 48).
7.
Remove the secondary hard drive (see Secondary hard drive on page 50).
8.
Remove the optical drive (see Optical drive on page 58).
9.
Remove the keyboard (see Keyboard on page 60).
10. Remove the top cover (see Top cover on page 62).
Remove the power button board:
66
1.
Turn the top cover upside down with the front toward you.
2.
Remove the two Phillips PM2.0×3.0 screws (1) that secure the power button board to the top
cover.
Chapter 4 Removal and replacement procedures
ENWW
3.
Remove the power button board (2) and cable.
Reverse this procedure to install the power button board.
ENWW
Component replacement procedures
67
Display assembly
Description
Spare part number
17.3-inch HD+ flush glass AntiGlare display assembly with webcam and 2 microphones for use in
silver computers
605325-001
17.3-inch HD+ standard display assembly with webcam and 2 microphones for use in silver
computers
605324-001
17.3-inch HD+ standard display assembly with webcam and 2 microphones for use in black
computers
605327-001
17.3-inch HD+ standard display assembly with webcam and 2 microphones for use in white
computers
609788-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the hard drive (see Hard drive on page 48).
7.
Remove the secondary hard drive (see Secondary hard drive on page 50).
8.
Remove the optical drive (see Optical drive on page 58).
9.
Remove the keyboard (see Keyboard on page 60).
10. Remove the top cover (see Top cover on page 62).
68
Chapter 4 Removal and replacement procedures
ENWW
Remove the display assembly:
1.
Disconnect the WLAN cables (1) from under the system board and the display panel cable (2)
from the system board.
CAUTION: Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other computer
components.
2.
ENWW
Remove the two Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer.
Component replacement procedures
69
3.
Remove the display assembly (2).
NOTE: Steps 4 through 17 provide component removal information for computer models
equipped with a flush glass display assembly. See steps 18 through 29 for component removal
information for computer models equipped with a standard display assembly.
4.
If it is necessary to replace the display enclosure or any of the display assembly internal
components, remove the following screw covers and screws:
(1) Two rubber screw covers on the display bezel bottom edge. The rubber screw covers are
included in the Display Rubber Kit, spare part number 605341-001.
(2) Two Phillips PM2.5×7.0 screws.
70
Chapter 4 Removal and replacement procedures
ENWW
5.
Turn the display assembly upside down, with the bottom toward you.
6.
Lift and release the bottom of the display enclosure (1).
7.
Disconnect the display logo cable (2) from the display panel cable.
8.
Route the webcam cable and antenna cables (3) through the hinge channel.
9.
Remove the display enclosure (4). The display enclosure is available using spare part number
605330-001.
10. If it is necessary to remove the hinge cover, remove the four Phillips PM2.5×5.0 screws (1) that
secure the hinge cover to the display assembly, and then remove the cover (2). The hinge cover is
available using spare part number 605336-001.
11. If it is necessary to replace the webcam/microphone module, remove the Phillips PM2.0×4.0
screw (1) that secures the module to the display bezel.
12. Release the webcam/microphone module (2) as far as the webcam/microphone module cable
allows.
ENWW
Component replacement procedures
71
13. Disconnect the webcam/microphone module cable (3) and remove the webcam/microphone
module. The webcam/microphone module is available using spare part number 603660-001.
14. Disconnect the display panel cable from the display panel. The display panel cable is available in
the Display Cable Kit using spare part number 605333-001.
15. If it is necessary to replace the display hinges, remove the six Phillips PM2.5×5.0 screws (1) that
secure the display hinges to the top of the display panel.
16. Remove the four Phillips PM 2.0×5.0 screws that secure the hinges to the sides of the display
panel (2).
72
Chapter 4 Removal and replacement procedures
ENWW
17. Remove the display hinge assembly (3) by lifting it straight up. The Display Hinge Kit is available
using spare part number 605334-001. The Display Screw Kit is available using spare part
number 611251-001.
The left and right sides of the display hinge assembly are secured using four PM 2.5×4.0 screws
(1) to a bracket (2) as shown in the following image.
NOTE: Steps 18 through 29 provide component removal information for computer models
equipped with a standard display assembly. See steps 4 through 17 for component removal
information for computer models equipped with a flush glass display assembly.
ENWW
Component replacement procedures
73
18. If it is necessary to replace the display bezel or any of the display assembly internal components,
remove the following screw covers and screws:
(1) Two rubber screw covers on the display bezel bottom edge. The display rubber screw covers
are included in the Display Rubber Kit, spare part number 605341-001.
(2) Two Phillips PM2.5×5.0 screws
19. Slide off each hinge cover to remove from the display assembly.
20. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge of the
display bezel (3) until the bezel disengages from the display enclosure.
74
Chapter 4 Removal and replacement procedures
ENWW
21. Remove the display bezel (4). The display bezel is available using the spare part number
605340-001 for silver computer models or 615442-001 all other computer models.
22. If it is necessary to replace the display panel, remove the two Phillips PM2.5×5.0 screws from the
top corners and the six Phillips PM2.5×5.0 screws (1) from the display hinges.
23. Lift the top of the display panel (2) upward and release the display hinges.
24. Disconnect the display panel cable (3) from the back of the panel. The display panel is available
using spare part number 605337-001.
25. If it is necessary to replace the display hinges, remove the two Phillips PM2.0×3.0 screws (1) that
secure each display hinge to the display panel.
ENWW
Component replacement procedures
75
26. Remove the display hinges (2). The display hinges are available in the Display Hinge Kit, spare
part 605342-001. The display hinge screws are available in the Display Screw Kit, spare part
number 605332-001.
27. If it is necessary to remove the webcam/microphone module, lift the module (1) and then
disconnect the module cable (2). The webcam/microphone module is available using spare part
number 603660-001.
76
Chapter 4 Removal and replacement procedures
ENWW
28. If it is necessary to remove the wireless antennas, remove two Phillips PM2.0×3.0 screws (1) and
lift (2) the antennas and cables to remove from the display enclosure. The wireless antennas are
available using spare part number 605359-001.
29. If it is necessary to remove the display power panel which includes display panel cable and
Webcam cable, remove the adhesive plastic strip (1) from the display panel cable, and lift the
cable (2). Disconnect (3) the cable from the display panel and remove the cable (4). The display
panel cable is available in the Display Cable Kit using spare part number 605333-001.
Reverse this procedure to reassemble and install the display assembly.
ENWW
Component replacement procedures
77
System board
NOTE: The system board spare kit includes replacement thermal material.
78
Description
Spare part number
With ATI Mobility Radeon HD 6550 discrete graphics subsystem, 1-GB of dedicated memory
(Quad Core), and subwoofer v.1.2
630979-001
With ATI Mobility Radeon HD 6550 discrete graphics subsystem and 1-GB of dedicated memory
(Quad Core), but without subwoofer
630978-001
With ATI Mobility Radeon HD 6550 discrete graphics subsystem, 1-GB of dedicated memory
(Dual Core), and subwoofer v.1.2
630981-001
With ATI Mobility Radeon HD 6550 discrete graphics subsystem and 1-GB of dedicated memory
(Dual Core), but without subwoofer
630980-001
With ATI Mobility Radeon HD 6370 discrete graphics subsystem, 512-MB of dedicated memory
(Quad Core), and subwoofer v.1.2
630983-001
With ATI Mobility Radeon HD 6370 discrete graphics subsystem and 512-MB of dedicated
memory (Quad Core), but without subwoofer
630982-001
With ATI Mobility Radeon HD 6370 discrete graphics subsystem, 512-MB of dedicated memory
(Dual Core), and subwoofer v.1.2
630985-001
With ATI Mobility Radeon HD 6370 discrete graphics subsystem and 512-MB of dedicated
memory (Dual Core), but without subwoofer
630984-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem, 1-GB of dedicated memory
(Quad Core), and subwoofer v.1.1
615313-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of dedicated memory
(Quad Core), but not subwoofer
615309-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem, 1-GB of dedicated memory
(Dual Core), and subwoofer v.1.1
615314-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of dedicated memory
(Dual Core), but no subwoofer
615310-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of dedicated memory
(Quad core) and v.1.0 subwoofer
615307-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of dedicated memory
(Dual core) and v.1.0 subwoofer
615308-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of dedicated memory
(Quad core)
605320-001
With ATI Mobility Radeon HD 5650 discrete graphics subsystem and 1-GB of dedicated memory
(Dual core)
605321-001
With ATI Mobility Radeon HD 5470 discrete graphics subsystem, 512-MB of dedicated memory
(Dual Core), and subwoofer v.1.1
615315-001
With ATI Mobility Radeon HD 5470 discrete graphics subsystem and 512-MB of dedicated
memory (Dual Core), but no subwoofer
615312-001
With ATI Mobility Radeon HD 5470 discrete graphics subsystem and 512-MB of dedicated
memory (Dual Core) and v.1.0 subwoofer
609787-001
Chapter 4 Removal and replacement procedures
ENWW
Description
Spare part number
With ATI Mobility Radeon HD 5470 discrete graphics subsystem and 512-MB of dedicated
memory (Dual Core)
605319-001
With Intel HM55 HD UMA graphics subsystem and shared memory and v.1.1 subwoofer
615311-001
With Intel HM55 HD UMA graphics subsystem and shared memory and v.1.0 subwoofer
605322-001
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the following components:
a.
Hard drive (see Hard drive on page 48).
b.
Remove the secondary hard drive (see Secondary hard drive on page 50).
c.
Optical drive (see Optical drive on page 58)
d.
Keyboard (see Keyboard on page 60)
e.
Top cover (see Top cover on page 62)
f.
Display assembly (see Display assembly on page 68)
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
ENWW
●
RTC battery (see RTC battery on page 56)
●
Memory module (see Memory module on page 57)
●
WLAN module (see WLAN module on page 52)
●
Fan/heat sink assembly (see Fan/heat sink assembly on page 89)
●
Processor (see Processor on page 93)
Component replacement procedures
79
Remove the system board:
1.
Disconnect the following cables from the system board:
(1) USB board cable
(2) Power connector cable
(3) Subwoofer cable
(4) Speaker cable
2.
Remove the two Phillips PM2.5×5.0 screws (1) that secure the system board to the base
enclosure.
3.
Lift up on the right side of the system board until it is at approximately a 45-degree angle (2), and
then lift the system board to the right and up and out of the base enclosure (3).
Reverse this procedure to install the system board.
80
Chapter 4 Removal and replacement procedures
ENWW
USB board
Description
Spare part number
USB board (includes cable)
605348-001
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the following components:
a.
Hard drive (see Hard drive on page 48).
b.
Secondary hard drive (see Secondary hard drive on page 50).
c.
Optical drive (see Optical drive on page 58).
d.
Keyboard (see Keyboard on page 60).
e.
Top cover (see Top cover on page 62).
f.
Display assembly (see Display assembly on page 68).
Remove the USB board:
ENWW
1.
Disconnect the USB board cable (1) from the LIF connector on the system board.
2.
Remove the Phillips PM2.5×5.0 screw (2) that secures the USB board to the base enclosure.
Component replacement procedures
81
3.
Remove the USB board (3) from the base enclosure.
Reverse this procedure to install the USB board.
Bluetooth module
Description
Spare part number
Bluetooth module (does not include cable)
537921-002
Bluetooth module cable
605323-001
Before removing the Bluetooth module, follow these steps:
82
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the following components:
a.
Hard drive (see Hard drive on page 48).
b.
Secondary hard drive (see Secondary hard drive on page 50).
c.
Optical drive (see Optical drive on page 58).
d.
Keyboard (see Keyboard on page 60).
Chapter 4 Removal and replacement procedures
ENWW
e.
Top cover (see Top cover on page 62).
f.
Display assembly (see Display assembly on page 68).
Remove the Bluetooth module:
1.
Disconnect the Bluetooth module cable (1) from the system board.
2.
Slide the Bluetooth module out of the slot and remove the module (2) from the computer.
Reverse this procedure to install the Bluetooth module.
ENWW
Component replacement procedures
83
Speaker assembly
Description
Spare part number
Speaker assembly
605356-001
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the hard drive (see Hard drive on page 48).
7.
Remove the secondary hard drive (see Secondary hard drive on page 50).
8.
Remove the optical drive (see Optical drive on page 58).
9.
Remove the keyboard (see Keyboard on page 60).
10. Remove the top cover (see Top cover on page 62).
Remove the speaker assembly:
84
1.
Disconnect the speaker assembly cable (1) from the system board.
2.
Remove two Phillips PM2.5×5.0 screws (2).
Chapter 4 Removal and replacement procedures
ENWW
3.
Remove the speaker assembly (3).
Reverse this procedure to install the speaker assembly.
Optical drive connector
Description
Spare part number
Optical drive connector
603680-001
Before removing the optical drive connector, follow these steps:
ENWW
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the following components:
a.
Hard drive (see Hard drive on page 48).
b.
Secondary hard drive (see Secondary hard drive on page 50).
c.
Optical drive (see Optical drive on page 58).
d.
Keyboard (see Keyboard on page 60).
Component replacement procedures
85
e.
Top cover (see Top cover on page 62).
f.
Display assembly (see Display assembly on page 68).
g.
USB board (see USB board on page 81).
Remove the optical drive connector:
1.
Remove the two Phillips PM2.5×3.0 screws (1) that secure the optical drive connector to the base
enclosure.
2.
Remove the optical drive connector (2) .
Reverse this procedure to install the optical drive connector.
Subwoofer
Description
Spare part number
Subwoofer
605357-001
Before removing the subwoofer, follow these steps:
86
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Chapter 4 Removal and replacement procedures
ENWW
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the following components:
a.
Hard drive (see Hard drive on page 48).
b.
Secondary hard drive (see Secondary hard drive on page 50).
c.
Optical drive (see Optical drive on page 58).
d.
Keyboard (see Keyboard on page 60).
e.
Top cover (see Top cover on page 62).
f.
Display assembly (see Display assembly on page 68).
g.
USB board (see USB board on page 81).
Remove the subwoofer:
1.
Disconnect the subwoofer cable from the system board (1).
2.
Remove the three Phillips PM2.5×4.0 broadhead screws (2) that secure the subwoofer to the base
enclosure.
3.
Remove the subwoofer (3).
Reverse this procedure to install the subwoofer.
ENWW
Component replacement procedures
87
Power connector cable
Description
Spare part number
Power connector and cable
605364-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the following components:
a.
Hard drive (see Hard drive on page 48).
b.
Secondary hard drive (see Secondary hard drive on page 50).
c.
Optical drive (see Optical drive on page 58).
d.
Keyboard (see Keyboard on page 60).
e.
Top cover (see Top cover on page 62).
f.
Display assembly (see Display assembly on page 68).
g.
System board (see System board on page 78).
h.
USB board (see USB board on page 81).
Remove the power connector cable:
1.
88
Remove the Phillips PM2.5×3.0 screw (1) that secures the power connector and bracket (2) to the
base enclosure.
Chapter 4 Removal and replacement procedures
ENWW
2.
Remove the power connector cable (3).
Reverse this procedure to install the power connector cable.
Fan/heat sink assembly
NOTE: The fan/heat sink assembly spare kit includes replacement thermal material.
Description
Spare part number
For use only with computer models equipped with graphics subsystems with UMA memory
603690-001
For use only with computer models equipped with ATI Mobility Radeon HD 5470 graphics
subsystems with discrete memory
604787-001
For use only with computer models equipped with ATI Mobility Radeon HD 5650 graphics
subsystems with discrete memory
605363-001
NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the right side
and rear panel of the computer. The computer uses an electric fan for ventilation. The fan is controlled
by a temperature sensor and is designed to turn on automatically when high temperature conditions
exist. These conditions are affected by high external temperatures, system power consumption, power
management/battery conservation configurations, battery fast charging, and software requirements.
Exhaust air is displaced through the ventilation grill located on the left side of the computer.
Before removing the fan/heat sink assembly, follow these steps:
ENWW
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
Component replacement procedures
89
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the following components:
a.
Hard drive (see Hard drive on page 48).
b.
Secondary hard drive (see Secondary hard drive on page 50).
c.
Optical drive (see Optical drive on page 58).
d.
Keyboard (see Keyboard on page 60).
e.
Top cover (see Top cover on page 62).
f.
Display assembly (see Display assembly on page 68).
g.
System board (see System board on page 78).
h.
USB board (see USB board on page 81).
Remove the fan/heat sink assembly:
NOTE: Steps 1 through 4 apply only to models with discrete subsystem memory on the system board.
See steps 5 through 8 apply only to models with UMA subsystem memory on the system board.
90
1.
Turn the system board upside down, with the expansion port and external monitor port toward
you.
2.
Loosen the seven PM2.5×3.0 Phillips captive screws (1) that secure the fan/heat sink assembly to
the system board.
Chapter 4 Removal and replacement procedures
ENWW
3.
Remove the fan/heat sink assembly (2). Disconnect the fan cable (3) from the system board.
NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink assembly
from side to side to detach the assembly.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
assembly and the system board each time the fan/heat sink assembly is removed. Thermal paste is
used on the heat sink (1) and the processor (2). Thermal pads are used on the Northbridge
contact (3) and Northbridge chip (4), the graphics/heat sink contact (5) and graphics subsystem
chip (6), and graphics/heat sink contact (7) and capacitors (8). Replacement thermal material is
included with all fan/heat sink assembly, system board, and processor spare part kits.
4.
ENWW
Turn the system board upside down, with the expansion port and external monitor port toward
you.
Component replacement procedures
91
5.
Loosen the four Phillips PM2.5×3.0 captive screws (1) that secure the fan/heat sink assembly to
the system board.
6.
Remove the fan/heat sink assembly (2). Disconnect the fan cable (3) from the system board.
NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink assembly
from side to side to detach the assembly.
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly
and the system board each time the fan/heat sink assembly is removed. Thermal paste is used on
the heat sink (1) and the processor (2). Thermal pads are used on the Northbridge contact (3)
and Northbridge chip (4)..
Reverse this procedure to install the fan/heat sink assembly.
92
Chapter 4 Removal and replacement procedures
ENWW
Processor
NOTE: The processor spare part kit includes thermal material.
Description
Spare part number
Intel Core i7-840QM processor with 1.86-GHz, SC turbo up to 3.06-GHz, Quad 45W
612260-001
Intel Core i7-820QM processor with 1.73-GHz, SC turbo up to 3.06-GHz, Quad 45W
583053-001
Intel Core i7-740QM processor with 1.73-GHz, SC turbo up to 3.06-GHz, Quad 45W
612259-001
Intel Core i7-720QM processor with 1.6-GHz, SC turbo up to 2.8-GHz, Dual 45W
586170-001
Intel Core i5-540M processor with 2.53-GHz, SC turbo up to 3.06-GHz, Dual 35W
594188-001
Intel Core i5-520M processor with 2.4-GHz, SC turbo up to 2.93-GHz, Dual 35W
594187-001
Intel Core i5-450M processor with 2.40-GHz, SC turbo up to 2.53-GHz, Dual 35W
613585-001
Intel Core i5-430M processor with 2.26-GHz, SC turbo up to 2.53-GHz, Dual 35W
597624-001
Intel Core i3-370M processor with 2.40-GHz, SC turbo up to 2.53-GHz, Dual 35W
613584-001
Intel Core i3 350M processor 2.26-GHz, Dual 35W
597623-001
Intel Pentium P6200 2.13-GHz processor (1066-MHz, 3 MB L3 cache)
625831-001
Intel Pentium P6100 2.00-GHz processor (1066-MHz, 3 MB L3 cache)
613587-001
Intel Pentium P6000 1.86-GHz processor (1066-MHz, 3 MB L3 cache)
613586-001
Before removing the processor, follow these steps:
ENWW
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the primary hard drive cover (see Primary hard drive cover on page 47).
6.
Remove the following components:
a.
Hard drive (see Hard drive on page 48).
b.
Secondary hard drive (see Secondary hard drive on page 50).
c.
Optical drive (see Optical drive on page 58).
d.
Keyboard (see Keyboard on page 60).
e.
Top cover (see Top cover on page 62).
f.
USB board (see USB board on page 81).
Component replacement procedures
93
g.
Display assembly (see Display assembly on page 68).
h.
System board (see System board on page 78).
i.
Fan/heat sink assembly (see Fan/heat sink assembly on page 89).
Remove the processor:
1.
Turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.
2.
Lift the processor (2) straight up and remove it.
NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned
with the triangle icon (4) embossed on the processor socket.
Reverse this procedure to install the processor.
94
Chapter 4 Removal and replacement procedures
ENWW
5
Setup Utility (BIOS)
Starting Setup Utility
Setup Utility is a ROM-based information and customization utility is used even when the Windows
operating system is not working.
NOTE: The fingerprint reader (select models only) cannot be used to access Setup Utility.
The utility reports information about the computer and provides settings for startup, security, and other
preferences.
To start Setup Utility:
▲
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu screen appears, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu screen appears, press the esc key. When the Startup Menu appears, press the f10
key.
ENWW
Starting Setup Utility
95
Using Setup Utility
Changing the language of Setup Utility
To change the language of Setup Utility:
NOTE: If Setup Utility is not running, begin at step 1. If Setup Utility is running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu screen appears, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu screen appears, press the esc key. When the Startup Menu appears, press the f10
key.
2.
Use the arrow keys to select System Configuration > Language, and then press the enter
key.
3.
Use the arrow keys to select a language, and then press the enter key.
4.
When a confirmation prompt with your language selected appears, press the enter key.
5.
To save the change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press the enter key.
Changes go into effect immediately.
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows-based, it does not support the TouchPad. Navigation and
selections are by keystroke.
To navigate Setup Utility:
96
●
Use the arrow keys to choose a menu or a menu item.
●
Use either the arrow keys or the f5 or f6 keys to choose an item in a list or to toggle a field,
for example an Enable/Disable field.
●
Press the enter key to select an item.
●
Press the esc key to close a text box or return to the menu display.
●
Press the f1 key to display additional navigation and selection information.
Chapter 5 Setup Utility (BIOS)
ENWW
Displaying system information
Use Setup Utility to view the system time and date and information that identifies the computer.
To display the system information using Setup Utility:
NOTE: If Setup Utility is running, begin at step 1. If Setup Utility is not running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu screen appears, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu screen appears, press the esc key. When the Startup Menu appears, press the f10
key.
2.
Select the Main menu.
3.
To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press the enter key.
Restoring default settings in Setup Utility
To restore Setup Utility default settings:
NOTE: If Setup Utility is not running, begin at step 1. If Setup Utility is running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu screen appears, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu screen appears, press the esc key. When the Startup Menu appears, press the f10
key.
2.
Use the arrow keys to select Exit > Load Setup Defaults, and then press the enter key.
3.
When the Setup Confirmation screen appears, press the enter key.
4.
To save the change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press the enter key.
Setup Utility default settings go into effect when the computer restarts.
NOTE: Password, security, and language settings are not changed when you restore the factory
default settings.
ENWW
Using Setup Utility
97
Exiting Setup Utility
Exit Setup Utility with or without saving changes.
●
To exit Setup Utility and save the changes from the current session:
If the Setup Utility menus are not visible, press the esc key to return to the menu display. Use the
arrow keys to select Exit > Exit Saving Changes, and then press the enter key.
●
To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press the esc key to return to the menu display. Use the
arrow keys to select Exit > Exit Discarding Changes, and then press the enter key.
After either choice, the computer restarts in Windows.
Setup Utility menus
The menu tables provide an overview of Setup Utility options.
NOTE: Some of the Setup Utility menu items might not be supported by the computer.
Main menu
Select
Function
System information
●
View and change the system time and date.
●
View identification information about the computer.
●
View specification information about the processor, memory size,
system BIOS, and keyboard controller version (select models only).
Security menu
98
Select
Function
Administrator password
Enter, change, or delete an administrator password.
Power-On Password
Enter, change, or delete a power-on password.
Chapter 5 Setup Utility (BIOS)
ENWW
System Configuration menu
Select
Function
Language Support
Change the language of Setup Utility.
Virtualization Technology (select models only)
Enable/disable the processor Virtualization Technology.
LAN Power Saving (select models only)
Enable/disable LAN Power Saving. When enabled, saves power when
the computer is in DC mode.
Fan Always On
Enable/disable Fan Always On. When enabled, the computer fan is
always on.
Action Keys Mode
Enable/disable the Action Keys.
Boot Options
●
POST (power-on self test) f10 and f12 Delay (sec.)―Set the delay
for the f10 and f12 functions of Setup Utility in intervals of 5
seconds each (0, 5, 10, 15, 20).
●
CD-ROM Boot―Enable/disable boot from CD-ROM.
●
Floppy Boot―Enable/disable boot from diskette.
●
Internal Network Adapter Boot―Enable/disable boot from the
internal network adapter.
●
Boot Order―Set the boot order for:
◦
Notebook Hard Drive
◦
Internal CD/DVD ROM Drive
◦
USB Diskette on Key/USB Hard Drive
◦
USB CD/DVD ROM Drive
◦
USB Floppy
◦
Network Adapter
Diagnostics menu
ENWW
Select
Function
Primary Hard Disk Self Test
Run a comprehensive self-test on the hard drive.
Secondary Hard Disk Self Test (select models only)
Run a comprehensive self-test on a secondary hard drive.
Memory Test
Run a diagnostic test on the system memory.
Setup Utility menus
99
6
Specifications
Computer specifications
Metric
U.S.
Width
41.53 cm
16.35 in
Depth
27.42 cm
10.80 in
Height (front to back)
Flush glass display: 3.27 to 3.67 cm
1.29 to 1.44 in
Standard display: 3.18 to 3.58 cm
1.25 to 1.41 in
DF (IMR): 3.30 to 3.70 cm
1.30 to 1.46 in
Flush glass display: 3.63 kg
7.99 lbs
Standard display: 3.41 kg
7.50 lbs
DF (IMR): 3.25 kg
7.15 lbs
Second hard drive adds:
0.11 kg
0.24 lbs
Camera adds:
0.005 kg
0.01 lbs
Dimensions
Weight (with optical drive, hard drive,
and battery)
Input power
Operating voltage
18.5 V dc @ 3.5 A - 65 W
Operating current
3.5 A or 4.74 A
Temperature
Operating (not writing to optical disc)
0°C to 35°C
32°F to 95°F
Operating (writing to optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Relative humidity
Operating
10% to 90%
Nonoperating
5% to 95%
Maximum altitude (unpressurized)
Operating
100 Chapter 6 Specifications
-15 m to 3,048 m
-50 ft to 10,000 ft
ENWW
Nonoperating
Metric
U.S.
-15 m to 12,192 m
-50 ft to 40,000 ft
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this
range of temperatures.
17.3-inch, HD+ flush glass AntiGlare display
specifications
Metric
U.S.
Height
20.7 cm
12.15 in
Width
33.1 cm
17.03 in
Diagonal
43.9 cm
17.29 in
Number of colors
Up to 16.8 million
Contrast ratio
200:1 (typical)
Brightness
180 nits (typical)
Dimensions
Pixel resolution
ENWW
Pitch
0.197 × 0.197 mm
Format
1600 × 900
Configuration
RGB vertical stripe
Backlight
LED
Character display
80 × 25
Total power consumption
2W
Viewing angle
+/-65° horizontal, +/-50° vertical (typical)
17.3-inch, HD+ flush glass AntiGlare display specifications 101
17.3-inch, HD+ BrightView display specifications
Metric
U.S.
Height
23.3 cm
9.17 in
Width
39.8 cm
15.67 in
Diagonal
43.9 cm
17.29 in
Number of colors
Up to 16.8 million
Contrast ratio
200:1
Brightness
200 nits typical
Dimensions
Pitch resolution
Pitch
0.23868 × 0.23868 mm
Format
1600 × 900
Configuration
RGB vertical stripe
Backlight
LED
Character display
80 × 25
Total power consumption
2W
Viewing angle
+/-65° horizontal, +/–50° vertical typical
102 Chapter 6 Specifications
ENWW
Hard drive specifications
1-TB*
750GB**
640-GB*
500-GB**
320-GB**
250-GB**
160-GB**
Height
12.5 mm
12.5 mm
9.5 mm
9.5 mm
9.5 mm
9.5 mm
9.5 mm
Length
100.2 mm
100.2 mm
100.2 mm
100.35 mm
100.35 mm
100.35 mm
100.35 mm
Width
69.85 mm
69.85 mm
69.85 mm
69.85 mm
69.85 mm
69.85 mm
69.85 mm
Weight
152 g
152 g
98 g
110 g
110 g
105 g
105 g
Interface
type
SATA( 3
GB/sec)
SATA (3
GB/sec)
SATA (3
GB/sec)
SATA
SATA
SATA
SATA
Synchronous
(maximum)
97 MB/
sec
97 MB/
sec
106 MB/
sec
1.1 GB/sec
(internal)
1.1 GB/sec
(internal)
1.1 GB/sec
(internal)
1.1 GB/sec
(internal)
Security
ATA
security
ATA
security
ATA
security
ATA security
ATA security
ATA security
ATA security
Dimensions
Transfer rate
Seek times (typical read, including setting)
Single track
2 ms
2 ms
1.5 ms
1.5 ms
1.5 ms
1.5 ms
1.5 ms
Average (read/
write)
12/16 ms
12/16 ms
12/13 ms
11/13 ms
11/13 ms
11/13 ms
11/13 ms
Maximum
21 ms
21 ms
24 ms
22 ms
22 ms
22 ms
22 ms
Logical
blocks
1,953,52
5,168
1,465,14
9,168
1,250,26
3,728
976,773,168
625,142,448
488,397,168
312,581,808
Disc
rotational
speed
5200-rpm
5200-rpm
5400-rpm
7200-rpm
7200-rpm
7200-rpm
7200-rpm
Operating
temperature
0°C to 60°C (32°F to 140°F)
*1 TB = 1 trillion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
**1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
NOTE:
ENWW
Certain restrictions and exclusions apply. Contact technical support for details.
Hard drive specifications 103
Blu-ray ROM with LightScribe DVD±R/RW
SuperMulti DL Drive
Applicable disc
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CDTEXT,
CD-ROM, CD-ROM XA,
MIXED MODE CD, CD-I, CD-I Bridge
(Photo-CD, Video CD), Multisession CD
(Photo-CD, CD-EXTRA, Portfolio, CD-R,
CD-RW), CD-R, CD-RW,
DVDROM (DVD-5, DVD-9, DVD-10,
DVD-18), DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-RAM, HDROM (Single Layer), HD-ROM (Dual
Layer), HD DVD-R, HD DVD-R for
Dual Layer, HD DVD-RW
CD-R and CD-RW DVD+R, DVD+R(9),
DVD+RW, DVD-R, DVD-R(9),DVD-RW,
DVD-RAM
Access time
CD
DVD
HD
Random
170 ms
170 ms
230 ms
Cache buffer
8 MB
Data transfer rate
24X CD-ROM
3,600 KB/sec
8X DVD
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8X DVD+R
10,800 KB/sec
4X DVD+RW
5,400 KB/sec
8X DVD-R
10,800 KB/sec
4X DVD-RW
5,400 KB/sec
2.4X DVD+R(9)
2,700 KB/sec
5X DVD-RAM
6,750 KB/sec
1X BD-ROM
4,500 KB/sec
1X BD-R read
4,500 KB/sec
1X BD-RE read
4,500 KB/sec
Transfer mode
Multiword DMA Mode
104 Chapter 6 Specifications
ENWW
DVD±RW and CD-RW SuperMulti Double-Layer
Combo Drive with LightScribe specifications
Applicable disc
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT,
CD-ROM, CD-ROM XA, MIXED MODE
CD, CD-I, CD-I Bridge (Photo-CD,
Video CD), Multisession CD (PhotoCD, CD-EXTRA, Portfolio, CD-R, CDRW), CD-R, CD-RW, DVD-ROM
(DVD-5, DVD-9, DVD-10, DVD-18),
DVD-R, DVD-RW, DVD+R, DVD+RW,
DVD-RAM
CD-R and CD-RW
DVD+R, DVD+RW, DVD-R, DVD-RW,
DVD-RAM
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Access time
CD
DVD
Random
< 175 ms
< 230 ms
Full stroke
< 285 ms
< 335 ms
Cache buffer
2 MB
Data transfer rate
ENWW
24X CD-ROM
3,600 KB/sec
8X DVD
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8X DVD+R
10,800 KB/sec
4X DVD+RW
5,400 KB/sec
8X DVD-R
10,800 KB/sec
4X DVD-RW
5,400 KB/sec
2.4X DVD+R(9)
2,700 KB/sec
5X DVD-RAM
6,750 KB/sec
Transfer mode
Multiword DMA Mode
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe specifications 105
System DMA specifications
Hardware DMA
System function
DMA0
Not applicable
DMA1*
Not applicable
DMA2*
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
System interrupt specifications (discrete)
Hardware IRQ
System function
IRQ0
System timer
IRQ1
Standard PS/2 Keyboard
IRQ7
Intel 5 Series/3400 Chipset Family SMBus Controller-3B30
IRQ8
System CMOS/real time clock
IRQ12
Synaptics PS/2 Port TouchPad
IRQ13
Numeric data processor
IRQ16
Intel 5 Series/3400 Chipset Family USB Enhanced Host Controller - 3B3C
Intel 5 Series/3400 Chipset Family PCI Express Root Port 2 -3B44
Intel Management Engine Interface
Intel processor PCI Express Root Port 1 - D138
IRQ17
High Definition Audio Controller
Intel 5 Series/3400 Chipset Family PCI Express Root Port 1 -3B42
IRQ19
Intel 5 Series 4 Port SATA AHCI Controller
IRQ21
Intel® 5 Series/3400 Chipset Family USB Enhanced Host Controller - 3B34
IRQ22
High Definition Audio Controller
IRQ23
HP Mobile Data Protection Sensor
IRQ81-190
Microsoft ACPI-Compliant System
IRQ-2
ATI Mobility Radeon HD 5470
IRQ-4
Intel WiFi Link 1000 BGN
106 Chapter 6 Specifications
ENWW
System interrupt specifications (switchable graphics)
Hardware IRQ
System function
IRQ0
System timer
IRQ1
Standard PS/2 Keyboard
IRQ7
Intel 5 Series/3400 Chipset Family SMBus Controller -3B30
IRQ8
System CMOS/real time clock
IRQ10
Network Controller
IRQ12
Synaptics PS/2 Port TouchPad
IRQ13
Numeric data processor
IRQ16
Intel 5 Series/3400 Chipset Family PCI Express Root Port 2 - 3B44
IRQ17
High Definition Audio Controller
Intel® 5 Series/3400 Chipset Family PCI Express Root Port 1 -3B42
IRQ19
Intel 5 Series 4 Port SATA AHCI Controller - 3B29
Intel Turbo Boost Technology Driver
ENWW
IRQ21
Intel 5 Series/3400 Chipset Family USB Enhanced Host Controller - 3B34
IRQ22
High Definition Audio Controller
IRQ23
HP Mobile Data Protection Sensor
IRQ81–190
Microsoft ACPI-Compliant System
IRQ-2
Relatek PCIe GBE Family Controller
IRQ-3
ATI Mobility Radeon HD 5650
System interrupt specifications (switchable graphics) 107
System interrupt specifications (UMA)
Hardware IRQ
System function
IRQ0
System timer
IRQ1
Standard 101-/102-Key or Microsoft® Natural Keyboard
IRQ8
System CMOS/real-time clock
IRQ10*
Intel 5 Series/3400 Chipset Family SMBus Controller -3B30
IRQ12
Synaptics PS/2 TouchPad
IRQ13
Numeric data processor
IRQ16
IRQ16 Broadcom 4313 802.11b/g/n
IRQ17
Intel 5 Series/3400 Chipset Family PCI Express Root Port 1 -3B42
IRQ19
Intel Turbo Boost Technology Driver
IRQ21
Intel 5 Series/3400 Chipset Family USB Enhanced Host Controller - 3B34
IRQ22
High Definition Audio Controller
IRQ23
HP Mobile Data Protection Sensor
IRQ81-190
Microsoft ACPI-Compliant System
IRQ-2
Intel Graphics Media Accelerator HD
108 Chapter 6 Specifications
ENWW
System I/O address specifications
ENWW
I/O address (hex)
System function (shipping configuration)
00-1F
DMA Controller Channel 0-3
CF7
PCI Bus on MS ACPI-Compliant System
20 - 21
Programmable Interrupt Controller (Master Controller)
24 - 25
Programmable Interrupt Controller (Aliases)
28 - 29
Programmable Interrupt Controller (Aliases)
2C - 2D
Programmable Interrupt Controller (Aliases)
2E -2F
M/B Resource (LPC Controller)
30 - 31
Programmable Interrupt Controller (Aliases)
34 - 35
Programmable Interrupt Controller (Aliases)
38 - 39
Programmable Interrupt Controller (Aliases)
3C - 3D
Programmable Interrupt Controller (Aliases)
40 - 43
System Timer
4E - 4F
M/B Resource (LPC Controller)
50 - 53
System Timer
60
Standard PS/2 Keyboard
61
LPC
62
EC
63
LPC
64
Standard PS/2 Keyboard
65
LPC
66
EC
67
LPC
70
LPC
70 - 77
System CMOS/Real Time Clock
80
LPC
81 - 91
DMA Controller Channel 2
92
LPC
93-9F
DMA Controller
A0 - A1
Programmable Interrupt Controller (Slave Controller)
A4 - A5
Programmable Interrupt Controller (Aliases)
A8 - A9
Programmable Interrupt Controller (Aliases)
System I/O address specifications 109
I/O address (hex)
System function (shipping configuration)
AC - AD
Programmable Interrupt Controller (Aliases)
B0 - B1
Programmable Interrupt Controller (Aliases)
B2 - B3
LPC
B4 - B5
Programmable Interrupt Controller (Aliases)
B8 - B9
Programmable Interrupt Controller (Aliases)
BC - BD
Programmable Interrupt Controller (Aliases)
C0 - DF
DMA Controller Channel 4-7
F0
Numeric data processor
380 - 38E
LPC
3B0 - 3BB
VGA
3C0 - 3DF
VGA
400 - 47F
LPC
4D0 - 4D1
Programmable Interrupt Controller
500 - 57F
LPC
680 - 69F
LPC
800 - 80F
LPC
810 - 817
LPC
820 - 823
LPC
D00 - FFFF
PCI Bus on MS ACPI-Compliant System
164E - 164F
LPC
2000 - 2FFF
Intel® 5 Series/3400 Chipset Family PCI Express Root Port 2 -3B44
3000 - 3FFF
Intel 5 Series/3400 Chipset Family PCI Express Root Port 1 -3B42
4000 - 401F
Intel 5 Series/3400 Chipset Family SMBus Controller -3B30
4020 - 403F
Intel 5 Series 4 Port SATA AHCI Controller
4040 - 4047
Intel 5 Series 4 Port SATA AHCI Controller
4048 - 404F
Intel 5 Series 4 Port SATA AHCI Controller
4050 - 4057
Intel VGA
4058 - 405B
Intel 5 Series 4 Port SATA AHCI Controller
405C - 405F
Intel 5 Series 4 Port SATA AHCI Controller
110 Chapter 6 Specifications
ENWW
System memory map specifications
ENWW
Size
Memory address
System function
640 KB
00000000-0009FFFF
Base memory
128 KB
000A0000-000BFFFF
Video memory
48 KB
000C0000-000CBFFF
Video BIOS
160 KB
000C8000-000E7FFF
Unused
64 KB
000E8000-000FFFFF
System BIOS
15 MB
00100000-00FFFFFF
Extended memory
58 MB
04800000-07FFFFFF
Super extended memory
58 MB
04800000-07FFFFFF
Unused
2 MB
08000000-080FFFFF
Video memory (direct access)
4 GB
08200000-FFFEFFFF
Unused
64 KB
FFFF0000-FFFFFFFF
System BIOS
System memory map specifications 111
7
Backup and recovery
Recovery after a system failure is as complete as the most current backup. HP recommends creating
recovery discs immediately after software setup. As you add new software and data files, continue to
back up the system on a regular basis to maintain a reasonably current backup.
Tools provided by the operating system and HP Recovery Manager software are designed to help you
with the following tasks for safeguarding your information and restoring it in case of a system failure:
●
Creating a set of recovery discs (Recovery Manager software feature)—Recovery discs are used to
start up (boot) the computer and restore the operating system and software programs to factory
settings in case of system failure or instability.
●
Backing up your information regularly to protect your important system files.
●
Creating system restore points (operating system feature)—System restore points reverse
undesirable changes to the computer by restoring the computer to an earlier state.
●
Recovering a program or driver (Recovery Manager software feature)—This feature helps you
reinstall a program or driver without performing a full system recovery.
●
Performing a full system recovery (Recovery Manager software feature)—Recovery Manager
recovers the full factory image if you experience system failure or instability. Recovery Manager
works from a dedicated recovery partition (select models only) on the hard drive or from recovery
discs you create.
NOTE: If the computer includes a solid-state drive (SSD), a recovery partition might not be
included. Recovery discs are included for computers that do not have a partition. Use these discs
to recover the operating system and software. To check for the presence of a recovery partitions,
select Start > Computer. If the partition is present, an HP recovery drive is listed in the Hard
Disk Drives section of the window.
112 Chapter 7 Backup and recovery
ENWW
Creating recovery discs
HP recommends creating recovery discs so that the system can be restored to its original factory state if
you experience serious system failure or instability. Create these discs after setting up the computer for
the first time.
Handle these discs carefully and keep them in a safe place. The software creates only one set of
recovery discs.
NOTE: If the computer does not include an internal optical drive, use an optional external optical
drive (purchased separately) to create recovery discs, or purchase recovery discs from the HP website.
Before creating recovery discs:
●
You need high-quality DVD-R, DVD+R, BD-R (writable Blu-ray), or CD-R discs. All these discs are
purchased separately. DVDs and BDs have a much higher capacity than CDs. If you use CDs, up
to 20 discs might be required, whereas only a few DVDs or BDs are required.
NOTE: Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE
(rewritable Blu-ray) discs, are not compatible with the Recovery Manager software.
●
The computer must be connected to AC power during this process.
●
Only one set of recovery discs are created per computer.
●
Number each disc before inserting it into the optical drive.
●
If necessary, exit the program before you have finished creating the recovery discs. The next time
you open Recovery Manager, you are prompted to continue the disc creation process.
To create a set of recovery discs:
ENWW
1.
Select Start > All Programs > Recovery Manager > Recovery Disc Creation.
2.
Follow the on-screen instructions.
Creating recovery discs 113
Backing up your information
As you add new software and data files, back up your system on a regular basis to maintain a
reasonably current backup.
Back up your system at the following times:
●
At regularly scheduled times
NOTE: Set reminders to back up your information periodically.
●
Before the computer is repaired or restored
●
Before adding or modifying hardware or software
When backing up:
●
Create system restore points using the Windows System Restore feature, and periodically copy
them to disc.
●
Store personal files in the Documents library and periodically back up this folder.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your
settings. The screen shot is a time-saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document:
1.
Display the screen.
2.
Copy the screen:
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
3.
Open a word-processing document, and then select Edit > Paste.
4.
Save the document.
●
Back up your information to an optional external hard drive, a network drive, or discs.
●
When backing up to discs, use any of the following types of discs (purchased separately): CD-R,
CD-RW, DVD+R, DVD-R, or DVD±RW. The discs used depend on the type of optical drive installed
in the computer.
NOTE: DVDs store more information than CDs, so using them for backup reduces the number of
recovery discs required.
●
When backing up to discs, number each disc before inserting it into the optical drive of the
computer.
114 Chapter 7 Backup and recovery
ENWW
Using Windows Backup and Restore
To create a backup using Windows Backup and Restore:
NOTE: Be sure that the computer is connected to AC power before starting the backup process.
NOTE: The backup process might take over an hour, depending on file size and the speed of the
computer.
1.
Select Start > All Programs > Maintenance > Backup and Restore.
2.
Follow the on-screen instructions.
NOTE: Windows includes the User Account Control feature to improve the security of the computer.
You might be prompted for your permission or password for tasks such as installing software, running
utilities, or changing Windows settings. For more information, see Help and Support.
Using system restore points
When backing up your system, you are creating a system restore point. A system restore point saves
and names a snapshot of the hard drive at a specific point in time. You can then recover back to that
point if you want to reverse subsequent changes made to thesystem.
NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since
the last restore point.
Create additional restore points to provide increased protection for the system files and settings.
When to create restore points
Create restore points:
●
Before adding or extensively modifying software or hardware
●
Periodically, whenever the system is performing optimally
NOTE: If you revert to a restore point and then change your mind, reverse the restoration.
Create a system restore point
To create a system restore point:
ENWW
1.
Select Start > Control Panel > System and Security > System.
2.
In the left pane, click System Protection.
3.
Click the System Protection tab.
4.
Under Protection Settings, select the disk for which you want to create a restore point.
5.
Click Create.
6.
Follow the on-screen instructions.
Backing up your information 115
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning
optimally:
1.
Select Start > Control Panel > System and Security > System.
2.
In the left pane, click System protection.
3.
Click the System Protection tab.
4.
Click System Restore.
5.
Follow the on-screen instructions.
Performing a recovery
NOTE: Recover only files that you have previously backed up. HP recommends using HP Recovery
Manager to create a set of recovery discs (entire drive backup) as soon as you set up the computer.
Recovery Manager software repairs or restores the system if you experience system failure or instability.
Recovery Manager works from recovery discs or from a dedicated recovery partition (select models
only) on the hard drive. However, if the computer includes a solid-state drive (SSD), you might not have
a recovery partition. If that is the case, recovery discs are included with the computer. Use these discs
to recover the operating system and software.
NOTE: Windows has its own built-in repair features, such as System Restore. If you have not already
tried these features, try them before using Recovery Manager.
NOTE: Recovery Manager recovers only software that was preinstalled at the factory. Software not
provided with this computer must be downloaded from the manufacturer's website or reinstalled from
the disc provided by the manufacturer.
Recovering from the recovery discs
To restore the system from the recovery discs:
1.
Back up all personal files.
2.
Insert the first recovery disc into the optical drive, and then restart the computer.
3.
Follow the on-screen instructions.
116 Chapter 7 Backup and recovery
ENWW
Recovering from the dedicated recovery partition (select models
only)
NOTE: If the computer includes a solid-state drive (SSD), a recovery partition might not be included.
Recovery discs are included for computers that do not have a partition. Use these discs to recover the
operating system and software. To check for the presence of a recovery partitions, select Start >
Computer. If the partition is present, an HP recovery drive is listed in the Hard Disk Drives section of
the window.
On some models, a recovery from the partition can be performed on the hard drive. This restores the
computer to its factory condition.
To restore the system from the partition:
1.
Access Recovery Manager by either:
●
Selecting Start > All Programs > Recovery Manager > Recovery Manager.
– or –
●
ENWW
Turning on or restarting the computer, and then pressing the esc key when the Press the ESC
key for Startup Menu screen appears. Then, press the f11 key when the Press <F11> for
recovery screen appears.
2.
Click System Recovery in the Recovery Manager window.
3.
Follow the on-screen instructions.
Performing a recovery 117
8
Connector pin assignments
Audio-in (microphone)
Pin
Signal
1
Audio signal in
2
Audio signal in
3
Ground
Audio-out (headphone)
Pin
Signal
1
Audio out, left channel
2
Audio out, right channel
3
Ground
118 Chapter 8 Connector pin assignments
ENWW
External monitor
ENWW
Pin
Signal
1
Red analog
2
Green analog
3
Blue analog
4
Not connected
5
Ground
6
Ground analog
7
Ground analog
8
Ground analog
9
+5 VDC
10
Ground
11
Monitor detect
12
DDC 2B data
13
Horizontal sync
14
Vertical sync
15
DDC 2B clock
External monitor 119
HDMI
Pin
Signal
1
TMDS data 2+
2
TMDS data 2 shield
3
TMDS data 2–
4
TMDS data 1+
5
TMDS data 1 shield
6
TMDS data 1–
7
TMDS data 0+
8
TMDS data 0 shield
9
TMDS data 0–
10
TMDS clock+
11
TMDS clock shield
12
TMDS clock-
13
CEC
14
Not connected
15
DDC clock
16
DDC data
17
Ground
18
+5V power
19
Hot plug detect
120 Chapter 8 Connector pin assignments
ENWW
RJ-45 (network)
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
Unused
5
Unused
6
Receive -
7
Unused
8
Unused
Universal Serial Bus
ENWW
Pin
Signal
1
+5 VDC
2
Data -
3
Data +
4
Ground
RJ-45 (network) 121
9
Power cord set requirements
The wide range input feature of the computer permits it to operate from any line voltage from 100 to
120 volts AC or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the
country or region where the equipment is purchased.
Power cord sets for use in other countries or regions must meet the requirements of the country or region
where the computer is used.
Requirements for all countries or regions
The requirements listed below are applicable to all countries or regions:
●
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
●
All power cord sets must be approved by an acceptable accredited agency responsible for
evaluation in the country or region where the power cord set will be used.
●
The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage
rating of 125 or 250 V AC, as required by each country or region’s power system.
●
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320
Standard Sheet C13 connector for mating with the appliance inlet on the back of the computer.
122 Chapter 9 Power cord set requirements
ENWW
Requirements for specific countries or regions
ENWW
Country or region
Accredited agency
Applicable note number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
The Netherlands
KEMA
1
Norway
NEMKO
1
The People's Republic of China
CCC
5
South Korea
EK
4
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
The United Kingdom
BSI
1
The United States
UL
2
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
2.
The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3.
The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall plug
must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4.
The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
5.
The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
Requirements for specific countries or regions 123
10 Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general
household waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! The backlight contains mercury. Caution must be exercised when removing and
handling the backlight to avoid damaging this component and causing exposure to the mercury.
CAUTION: The procedures in this chapter can result in damage to display components. The only
components intended for recycling purposes are the liquid crystal display (LCD) panel and the
backlight. When you remove these components, handle them carefully.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display
assembly that might require special handling at end-of-life. Disposal of mercury may be regulated
because of environmental considerations. For disposal or recycling information, contact your local
authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this chapter are general disassembly instructions. Specific details,
such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one
computer model to another.
124 Chapter 10 Recycling
ENWW
Perform the following steps to disassemble the display assembly:
ENWW
1.
Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly.
2.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of
the display bezel until the bezel disengages from the display assembly.
3.
Remove the display bezel (3).
Display 125
4.
Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).
5.
Remove all screws (1) that secure the display panel assembly to the display enclosure.
6.
Remove the display panel assembly (2) from the display enclosure.
7.
Turn the display panel assembly upside down.
8.
Remove all screws that secure the display panel frame to the display panel.
9.
Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display
panel frame.
126 Chapter 10 Recycling
ENWW
10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel.
12. Lift the top edge of the backlight cover (2) and swing it outward.
13. Remove the backlight cover.
14. Turn the display panel right-side up.
ENWW
Display 127
15. Remove the backlight cables (1) from the clip (2) in the display panel.
16. Turn the display panel upside down.
17. Remove the backlight frame from the display panel.
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
128 Chapter 10 Recycling
ENWW
18. Remove the backlight from the backlight frame.
19. Disconnect the display cable (1) from the LCD panel.
20. Remove the screws (2) that secure the LCD panel to the display rear panel.
21. Release the LCD panel (3) from the display rear panel.
22. Release the tape (4) that secures the LCD panel to the display rear panel.
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
ENWW
Display 129
Index
A
AC adapter
identifying 16
spare part numbers 30
AC adapter, spare part
numbers 37
administrator password 98
antenna, spare part number 32
antenna, spare part numbers 31
antennas 15
applications key, Windows 10
audio, product description 3
audio-in (microphone) jack
pin assignments 118
audio-out (headphone) jack
pin assignments 118
audio/infrared board
removal 82
spare part number 82
B
backing up
customized window, toolbar,
and menu bar settings 114
personal files 114
templates 114
base enclosure, spare part
number 25
base enclosure, spare part
numbers 35, 37
battery
identifying 16
removal 46
spare part
numbers 22, 32, 46
battery bay, identifying 13
battery release latch,
identifying 13
130 Index
bays
battery 13
primary hard drive 13
Blu-ray Disc ROM Drive
precautions 40
specifications 104
Blu-ray ROM DVD±R/RW
SuperMulti DL Drive with
LightScribe, spare part
number 36
Blu-ray ROM DVD±R/RW
SuperMulti DL Drive, spare part
number 22, 29, 58
Blu-ray ROM with LightScribe DVD
±R/RW SuperMulti DL Drive,
spare part
number 22, 29, 37, 58
Bluetooth module
spare part number 22, 31
Bluetooth module cable, spare part
number 22, 34
boot options 99
boot order 99
buttons
left TouchPad 7
power 9
right TouchPad 7
TouchPad On/Off 7
C
cables, service considerations 40
caps lock light, identifying 8
changing the language of Setup
Utility 96
chipset, product description 1
compartments
memory module 13
components
additional hardware 16
bottom 13
display 14
front 11
left-side 12
right-side 11
top 6
computer feet
locations 45
spare part number 45
computer specifications 100
connectors
service considerations 40
connectors, power 11
cord, power 16
D
Diagnostics menu 99
diskette drive, precautions 40
display assembly
removal 68
spare part
numbers 19, 34, 36, 68
display bezel
illustrated 27
spare part
numbers 27, 34, 37
Display Cable Kit, spare part
number 26, 27, 34
display components
illustrated 26
recycling 124
display enclosure
illustrated 27
removal 70
spare part numbers 27, 34
display enclosure, flush glass
illustrated 26
spare part numbers 26, 71
ENWW
display hinge
illustrated 26, 27
removal 72
spare part
numbers 26, 27, 73
display hinge cover
spare part
numbers 27, 34, 35
display hinge cover, spare part
numbers 26
Display Hinge Kit
spare part numbers 34, 35
Display Hinge Kit, spare part
numbers 26, 27, 73
display panel
illustrated 27
spare part numbers 27, 34
display panel, flush glass
illustrated 26
spare part numbers 26
display panel, product
description 2
Display Rubber Kit
spare part number 34
Display Rubber Kit, spare part
number 28
Display Screw Kit, spare part
number 28, 34
Display Screw Kit, spare part
numbers 26, 36
display specifications 101, 102
displaying system information 97
drives
boot order 99
preventing damage 40
DVD±RW and CD-RW Combo
Drive
precautions 40
spare part
number 22, 29, 36, 58
specifications 105
E
electrostatic discharge 41
eSATA/USB port, identifying 12
esc key, identifying 10
Ethernet, product description 3
exiting Setup Utility 98
external media cards, product
description 4
ENWW
external monitor port
identifying 12
pin assignments 119
F
f11 117
fan always on 99
fan/heat sink assembly
removal 89
spare part
numbers 20, 33, 34, 89
feet
locations 45
spare part number 45
fingerprint reader, identifying 9
fn key, identifying 10
full system recovery 112
function keys, identifying 10
G
graphics, product description 1
grounding equipment and
methods 43
H
hard drive
precautions 40
product description 2
removal 48
spare part
numbers 25, 29, 33, 34, 36
, 48
specifications 103
hard drive cable, spare part
number 22
Hard Drive Hardware Kit, spare
part number 25, 29, 36, 48
hard drive self test 99
HDMI port
identifying 12
pin assignments 120
headphone (audio-out) jack
pin assignments 118
hinge
illustrated 26, 27
removal 72
spare part
numbers 26, 27, 73
I
I/O address specifications
integrated webcam light,
identifying 14
internal microphones,
identifying 14
interrupt
specifications 106, 107, 108
J
jacks
RJ-45 (network) 12
K
keyboard
product description 4
removal 60
spare part number 60
spare part
numbers 20, 35, 60
keypad keys, identifying 10
keys
esc 10
fn 10
function 10
keypad 10
Windows applications 10
Windows logo 10
L
LAN Power Saving 99
language support 99
latch, battery release 13
lights
caps lock 8
mute 8
power 8
TouchPad 8
volume mute 8
webcam 14
wireless 8
M
Main menu 98
mass storage devices, spare part
numbers 29
memory map specifications 111
memory module
product description 2
removal 57
spare part
numbers 22, 33, 57
109
Index 131
memory module compartment,
identifying 13
memory test 99
microphone (audio-in) jack
pin assignments 118
microphone, product
description 3
model name 1
monitor port
pin assignments 119
monitor port, external 12
mute light, identifying 8
N
navigating in Setup Utility
network jack, pin
assignments 121
96
O
operating system, product
description 5
optical drive
precautions 40
product description 3
removal 58
spare part
numbers 22, 29, 36, 37, 58
specifications 104, 105
optical drive cable
spare part number 33
optical drive connector
spare part number 21
P
packing guidelines 42
passwords 98
performing a recovery 116
pin assignments
audio-in 118
audio-out 118
external monitor 119
HDMI 120
headphone 118
microphone 118
monitor 119
network 121
RJ-45 121
Universal Serial Bus (USB) 121
Plastic Kit, spare part
number 25, 36
plastic parts 39
132 Index
pointing device, product
description 4
ports
eSATA/USB 12
external monitor 12
HDMI 12
product description 4
USB 11, 12
power button board
removal 66
spare part number 20, 36, 66
power button, identifying 9
power connector and cable
removal 88
spare part number 20, 36
power connector, identifying 11
power cord
identifying 16
set requirements 122
spare part numbers 30, 31
power cord, spare part
numbers 31
power lights, identifying 8
power requirements, product
description 4
power-on password 98
primary hard drive bay,
identifying 13
primary hard drive cover
removal 47
processor
product description 1
removal 93
spare part
numbers 20, 32, 33, 36, 37
, 37, 38, 93
product description
audio 3
chipset 1
display panel 2
Ethernet 3
external media cards 4
graphics 1
hard drives 2
keyboard 4
memory module 2
microphone 3
operating system 5
optical drives 3
pointing device 4
ports 4
power requirements 4
processors 1
product name 1
security 5
serviceability 5
webcam 3
wireless 3
product name 1
R
recovering a program or
driver 112
recovering from the dedicated
recovery partition 117
recovering from the recovery
discs 116
recovery discs 112, 113
Recovery Manager 112, 116
recovery partition 112
recovery, system 116
remote control, spare part
number 31
remote control, spare part
numbers 30
removal/replacement
preliminaries 39
procedures 44
restore points 115
restoring default settings 97
RJ-45 (network) jack
identifying 12
pin assignments 121
RTC battery
removal 56
spare part number 22, 33, 56
rubber feet
spare part number 36
Rubber Feet Kit, spare part
number 45
S
Screw Kit
spare part number 36
secondary hard drive self test 99
security cable slot, identifying 11
Security menu 98
security, product description 5
selecting in Setup Utility 96
service considerations 39
ENWW
service tag 18, 44
serviceability, product
description 5
slots, security cable 11
solid-state drive
spare part number 33
solid-state drive
(SSD) 112, 116, 117
speaker assembly
removal 84
spare part number 20, 35, 84
speakers 11
specifications
Blu-ray Disc ROM Drive 104
computer 100
display 101, 102
DVD±RW and CD-RW Combo
Drive 105
hard drive 103
I/O addresses 109
interrupts 106, 107, 108
memory map 111
optical drive 104, 105
system DMA 106
starting Setup Utility 95
static-shielding materials 43
subwoofer
removal 86
spare part number 22, 36
supported discs 113
system board
removal 78
spare part
numbers 21, 34, 36, 37, 38
, 38, 78
System Configuration menu 99
system DMA 106
system failure or instability 112
system information 98
system memory map 111
system recovery 116
system restore points 112, 115
T
thermal material,
replacement 91, 92
tools required 39
top cover
removal 62
ENWW
spare part number 62
spare part
numbers 20, 35, 36
TouchPad
buttons 7
identifying 6
On/Off button 7
TouchPad light, identifying 8
transporting guidelines 42
TV tuner, spare part number 31
TV tuner, spare part numbers 30
WLAN module
removal 52
spare part
numbers 22, 32, 33, 36, 37
, 52
workstation guidelines 42
U
Universal Serial Bus (USB) port
pin assignments 121
USB board
removal 81
spare part number 21, 35, 81
USB ports, identifying 11, 12
using Setup Utility 96
using system restore 115
V
vents, identifying 13
Virtualization Technology 99
volume mute light, identifying 8
W
webcam
product description 3
Webcam/microphone
spare part number 33
webcam/microphone module
illustrated 26, 27
removal 71
spare part number 26
spare part
numbers 27, 71, 76
Windows applications key,
identifying 10
Windows logo key,
identifying 10
wireless antenna
spare part number 36
wireless antennas 15
wireless light 8
wireless network (WLAN)
identifying 13
wireless, product description 3
Index 133