VideoJet X10/X20/X40 SN Video Encoder

Video | VideoJet X10/X20/X40 SN Video Encoder
VideoJet X10/X20/X40 SN Video Encoder
▶ High-quality MPEG‑4 video over IP
▶ H.264 Baseline Profile encoding
▶ Units with one, two, or four video inputs
▶ Built-in Intelligence-at-the-Edge
▶ Network-attached RAID storage via iSCSI
▶ Local recording on CF card or USB hard drive
▶ ONVIF conformant
Bosch VideoJet X SN encoders belong to a family of highperformance, single-, dual-, or quad-input CCTV video
encoders that feature DVD-like quality MPEG‑4 video, at
up to 25/30 images per second, over IP networks. The
units support PAL and NTSC sources and provide
bidirectional audio communication in parallel to video.
They are built into a housing that can be easily rackmounted. These powerful and flexible devices represent
the cutting edge of high-performance Video-over-IP for
CCTV today.
Functions
Flexibility
VideoJet X SN encoders offer unparalleled recording
flexibility. Stream video across the network and store it
using Network Video Recorders (NVRs). Record locally on
CompactFlash, an external USB hard drive, or networkattached RAID iSCSI storage devices. The built-in iSCSI
support enables the VideoJet X SN encoders to act as
conventional DVRs while streaming high-performance live
video across the network.
Dual Streaming
The VideoJet X SN encoders use Dual Streaming to
generate two independent IP video streams per channel if
sufficient computational power is available. This allows
viewing and recording at two different quality levels to
save disk space and bandwidth. On alarm, they can send
an e‑mail with JPEG images attached.
Dual Recording
You can record the streams independently on different
media. Thus video can be recorded centrally on iSCSI
drives managed by VRM Video Recording Manager and
redundantly on the local media. If necessary, for example
in case of a network failure VRM can fill up the gap in the
central recording (ANR, Automatic Network
Replenishment).
Recording Profiles
The encoders feature a highly flexible recording scheduler,
providing up to ten programmable recording profiles and
allowing individually assigned camera profiles. With these
profiles, you can accelerate the frame rate as well as
increase the resolution on alarm, saving recording space
during non-alarm periods.
www.boschsecurity.com
2 | VideoJet X10/X20/X40 SN Video Encoder
H.264 Baseline Profile Encoding
Firmware 4.0 enables the Bosch VideoJet X encoders to
use H.264 Baseline Profile to encode the video signal. This
allows reducing the required bit rate for a given quality
setting, or increasing the quality when keeping the bit rate
setting.
Frame Rates and Resolution
When one or two inputs are used, the encoders deliver
MPEG‑4 video over IP at a full frame rate of 25 (PAL) or
30 (NTSC) images per second with up to 4CIF resolution
on every channel. If four inputs are used, the maximum
frame rate is 12.5/15 images per second at 4CIF
resolution and no Dual Streaming is possible.
Bosch offers more advanced video content analysis (VCA)
applications with its Intelligent Video Analysis (IVA). A
licensable option, it bases the IVA algorithm on digital
imaging technology that uses multi-level image analysis of
pixel, texture, and motion (trajectory) changes.
Viewing
View the VideoJet X SN encoder video on a PC using a
Web browser, in the Bosch Video Management System, or
integrate it into another video management system. By
routing the IP video to a high-performance VIP XD video
decoder or a VIDOS Monitor Wall, you can present the
video with ultimate clarity.
Camera control
Because H.264 Baseline Profile does not support field
encoding, interlaced video is not possible, thus resolution
is limited to a maximum of 2CIF. H.264 encoding requires
the double performance in respect to MPEG‑4. Frame rate
values must therefore be divided by two.
Configure and control your camera or dome using one of
the various pre-defined control protocols. VideoJet X SN
encoders provide a serial interface and alternatively
support Bilinx communication over coax cable.
The maximum frame rates listed in the tables below
depend on the resolution, picture content and movement,
and the number of inputs used.
Remotely upgrade the VideoJet X SN encoders whenever
new firmware becomes available. This ensures up-to-date
products, thus protecting investment with little effort.
MPEG‑4
4 inputs
2 inputs
1 input
ONVIF conformance
4CIF
12.5/15 ips
25/30 ips
25/30 ips
2/3 D1
25/30 ips
25/30 ips
25/30 ips
2CIF
25/30 ips
25/30 ips
25/30 ips
ips = frame rate in images per second
H.264
4 inputs
2 inputs
1 input
2CIF
12.5/15 ips
25/30 ips
25/30 ips
Easy Upgrade
Firmware 4.10 introduces conformance to the ONVIF
(Open Network Video Interface Forum) specification
guaranteeing interoperability between network video
products regardless of manufacturer. ONVIF conformant
devices are able to exchange live video, audio, metadata
and control information and ensure that they are
automatically discovered and connected to network
applications such as video management systems.
ips = frame rate in images per second
Access Security
Certifications and Approvals
The VideoJet X SN encoders offer various security levels
for accessing the network, the unit, and the data
channels. As well as password protection with three
levels, they support 802.1x authentication using a RADIUS
server for identification. You can secure Web browser
access by HTTPS using a SSL certificate that is stored in
the unit. For total data protection, each communication
channel—video, audio, or serial I/O—can be independently
AES encrypted with 128‑bit keys, once the Encryption Site
License has been applied.
Approvals
Intelligence
Safety
With built-in video content analysis, VideoJet X SN
encoders reinforce the Intelligence-at-the-Edge concept
where edge devices become increasingly intelligent. The
VideoJet X SN comes with built-in MOTION+ video motion
detection. This motion detection algorithm is based on
pixel change and includes object size filtering capabilities
and sophisticated tamper detection capabilities.
Region
Certification
Europe
CE
VideoJet X10/X20/X40 SN
VideoJet X10/X20/X40 SN Power Supply
USA
UL
VideoJet X10/X20/X40, X40 SN
VCS UL online certifications directory
(link)
Region
Number
IEC 60950
VideoJet X10/X20/X40 SN Video Encoder | 3
Electromagnetic Compatibility
1
USB
Region
Number
2
Video input 1 (2, 3, and 4 where applicable)
EU
EN55103-1 Video and audio equipment
3
2‑channel audio input (1‑channel for X10)
4
1‑channel audio output
5
LED CF (only operates if CF card is mounted)
6
LED Connect
EN50130-4 Alarm systems
EN55022 ITE
EN55024 ITE
Rear Connectors and Indicators
EN61000-3-2
EN61000-3-3
AUS/NZ
AS/NZS 3548 Class B
US
FCC 47 CFR Chapter 1 Part 15
Installation/Configuration Notes
1
2
3
VideoJet X SN series—rear
1
Ethernet
2
Compact Flash slot
3
Alarm input, relay output, serial interface, and power input on separate connector blocks
Rack Mounting Kit (Optional)
Dimensions in mm (inches)
Front Connectors and Indicators
Parts Included
Quantity Component
1
VideoJet X10 SN encoder with 1 video input, or
VideoJet X20 SN encoder with 2 video inputs, or
VideoJet X40 SN encoder with 4 video inputs
1
2
VideoJet X40 SN—front
3
4
5
6
1
Quick Installation Guide
1
CD-ROM with software and documentation
1
Set of spring clamp contact connectors
An optional power supply with primary adaptors for EU,
US, UK, and AUS can be ordered separately.
www.boschsecurity.com
4 | VideoJet X10/X20/X40 SN Video Encoder
Technical Specifications
Electrical
Audio
Standard
G.711; 300 Hz to 3.4 kHz
Data rate
80 kbps at 8 kHz sampling rate
Power supply
Via external unit or external battery
Input voltage
10 to 30 VDC
Network
Power consumption
X10: approx. 11 VA, fully equipped
Ethernet
10/100 Base‑T, auto-sensing, half/full duplex,
RJ45
Protocols
RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP,
DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP,
SNTP, SNMP (V1, MIB‑II), 802.1x
Encryption
TLS 1.0, SSL, AES (optional)
X20/X40: approx. 19 VA, fully equipped
Input/output
Video
X10: 1 x input
X20: 2 x input
•
•
•
X40: 4 x input
Control
connector
BNC
Software update
Flash ROM, remote programmable
impedance
75 ohm, switchable
Configuration
Configuration Manager or Web browser
signal
Analog composite, 0.7 to 1.2 Vpp, NTSC or
PAL
Camera control
Via serial interface;
supported* protocols and devices:
Audio
X10: 1 x mono line in, 1 x mono line out
X20/X40: 2 x mono line in, 1 x mono line out
•
•
•
connector
2 x 3.5 mm stereo jack
signal line in
9 kohm typical, 5.5 Vpp max
signal line out
3.0 Vpp at 10 kohm / 1.7 Vpp at 16 ohm typical
Alarm
•
•
4 x input
connector
Clamp (non-isolated closing contact)
activation resistance
10 ohm max
Relay
•
•
4 x output
connector
Clamp
signal
30 Vpp (SELV), 2 A
COM port
•
•
•
•
•
•
•
•
•
•
•
Bosch
Autodome, HSPT, MIC1-300 IP, TC8x00
Canon
VCC1, VC-C4R
CBC
SMD 12P/12PII/20P
JVC
TK-C676
Panasonic
WV-CS850
Pelco
Spectra D/P
Sensomatic
SpeedDome Ultra
Sony
EVI D30/31/D100
Ultrak
KD6
VT
VPT4x
Clamp, RS‑232/422/485
* Basic functions only, no claim for full functionality valid. Bosch may not be made responsible
if functions are not implemented or not working under all circumstances.
Connections
Video
Standards
H.264 Baseline Profile (ISO/IEC 14496‑10),
MPEG‑4, M‑JPEG, JPEG
CompactFlash
1 x CF slot for optional standard Type I/II CompactFlash memory card
Data rates
9.6 kbps to 6 Mbps per channel
USB port
1 x USB 2.0 high-speed port, 2.5 W max feed
Resolution
Horizontal x vertical PAL/NTSC
Mechanical
•
4CIF (MPEG‑4 on- X10/X20: 704 x 576/480 (25/30 ips*)
ly)
X40: 704 x 576/480 (12.5/15 ips*; all inputs
used)
•
•
•
•
•
2CIF
704 x 288/240 (25/30 ips*)
2/3 D1
464 x 576/480 (25/30 ips*)
1/2 D1
352 x 576/480 (25/30 ips*)
CIF
352 x 288/240 (25/30 ips*)
QCIF
176 x 144/120 (25/30 ips*)
* Depending on encoding algorithm, picture
content and movement
GOP structure
I, IP
Overall IP delay
120 ms
Frame rate
1 to 50/60 (PAL/NTSC)
Dimensions (H x W x D)
33 x 142 x 178 mm (1.3 x 5.6 x 7 in)
Weight
Approx. 0.6 kg (1.3 lb)
Environmental
Operating temperature
0 °C to +50 °C (+32 °F to +122 °F) ambient
temperature
Relative humidity
20 to 80% atmospheric humidity, non-condensing
Thermal value
X10: 37 BTU/h max, fully equipped
X20/X40: 65 BTU/h max, fully equipped
VideoJet X10/X20/X40 SN Video Encoder | 5
Ordering Information
VJT‑X10SN
VideoJet X10 SN for normal temperature
with 1 video input
VJT-X10SN
VJT‑X20SN
VideoJet X20 SN for normal temperature
with 2 video inputs
VJT-X20SN
VJT‑X40SN
VideoJet X40 SN for normal temperature
with 4 video inputs
VJT-X40SN
Accessories
VJT‑XACC‑PSN
VJX10/20/40 wide‑range power supply
VJT-XACC-PSN
VJT‑XACC‑RMK
VideoJet X SN rack-mount kit for 3 units
VJT-XACC-RMK
DVA-12T-04100RA iSCSI Diskarray 12bay
4 HDD, 4 TB
DVA-12T-04100RA
DVA-12T-12100RA iSCSI Diskarray 12bay
12 HDD, 12 TB
DVA-12T-12100RA
DSA-N2B20-06AT
iSCSI disk array, base unit with 6 x 1 TB SATA
hard disk
DSA-N2B20-06AT
DSA-N2B20-12AT
iSCSI disk array, base unit with 12 x 1 TB SATA hard disk
DSA-N2B20-12AT
DSA-N2B50-20AT
Base unit with 20 x 1 TB SATA hard disk
DSA-N2B50-20AT
Software Options
MVC-FIVA4-ENC1
IVA 4.x VCA software license for single channel encoder (e‑license)
MVC-FIVA4-ENC1
MVC-FIVA4-ENC2
IVA 4.x VCA software license for dual channel
encoder (e‑license)
MVC-FIVA4-ENC2
MVC-FIVA4-ENC4
IVA 4.x VCA software license for quad channel encoder (e‑license)
MVC-FIVA4-ENC4
MVC-FENC-AES BVIP AES 128 Bit
Encryption
BVIP AES 128‑bit encryption site license.
This license is required only once per installation. It enables encrypted communication between BVIP devices and management stations.
MVC-FENC-AES
www.boschsecurity.com
6 | VideoJet X10/X20/X40 SN Video Encoder
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 011 | Data subject to change without notice
T4402089227 | Cur: en-US, V18, 29 Aug 2011
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698
apr.securitysystems@bosch.com
www.boschsecurity.asia
Represented by