Datasheet | Switches
RAPIER 'i' SERIES
WAN Capable Layer 3 Fast Ethernet Switches
Rapier 16fi
16 port 100FX (SC or MT-RJ) Fast Ethernet
Layer 3 switch with 2 uplink bays and WAN
access bay
Rapier 24i
24 port 10/100TX Fast Ethernet Layer 3
switch with 2 uplink bays and WAN access
bay
Rapier 48i
48 port 10/100TX Fast Ethernet Layer 3
switch with 2 uplink bays
Performance
Allied Telesis' Rapier 'i' series of 10/100Mbps
Layer 3 switches deliver an unprecedented level
of integration, feature richness and switching
performance at affordable prices. With wirespeed
Layer 2 switching and wirespeed Layer 3 IP
routing on all ports, these switches are designed
for high-performance desktop connectivity,
workgroup and server farm aggregation or
backbone applications. In addition to the
impressive switching performance, the Rapier 'i'
series brings a large set of optional high-level
Layer 3 and security features for more advanced
networking applications.
Progressive Features
All Allied Telesis' Layer 3 switches come with the
feature rich operating system AlliedWare, which
includes Layer 3 IP Static Routing, RIP, RIPv2,VRRP
and OSPFv2 routing protocols. For advanced
networking applications Allied Telesis offers the
Rapier 'i' series with three optional feature
licenses: Full Layer 3 upgrade, Advanced Layer 3
upgrade, and Security upgrade. The Full Layer 3
upgrade enables a set of additional routing
protocols such as IPX, DVMRP, VRRP, PIMDM/SM and RSVP. The Advanced Layer 3
upgrade provides a set of the specialized
protocols consisting of IPv6, BGP4, and Load
Balancer. The Security upgrade offers an ICSAcertified Stateful Inspection Firewall as well as
both SMTP and HTTP application gateways.
Allied Telesis
WAN Support - Rapier Switch/Router
Key Features
The Rapier 16fi and 24i models support an
optional Network Services Module (NSM) with
a variety of Port Interface Cards (PICs) to
provide Wide Area Network connectivity for
E1,T1, PRI ISDN, BRI ISDN, Asynchronous and
Synchronous communications, Frame Relay and
X.25.The AlliedWare operating system provides
Layer 3 IP static routing, RIP, RIPv2,VRRP and
OSPFv2 routing protocols, while optional
specialized protocols are also available such as
BGP4, IPX, RSVP and the multicast routing
protocols of DVMRP and PIM-DM/SM.These
routing features give the Rapier 16fi and 24i the
ability to not only act as a managed Layer 3
switch, but also as a fully specified router with
four WAN interfaces.
•
•
•
•
Switching Features
The Rapier 'i' series of switches are some of the
most powerful switches on the market. All
Rapier 'i' Layer 3 switches include a suite of
advanced switching features such as IEEE
802.1Q VLAN Tagging, IGMPv2, 802.1p Traffic
Prioritization of packets at Layer 3 and Layer 4,
and broadcast and multicast traffic control.The
Quality of Service (QoS) features offered by the
Rapier 'i' series are particularly useful for multitenant unit, multi business unit,Telco, or
Network Service Provider applications.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Wirespeed Layer 2 - Layer 7 filtering
Wirespeed Layer 3 IP routing
Wirespeed Layer 2 switching
Non-blocking at full line rate for all packet
sizes (Rapier 16fi & Rapier 24i)
Port trunking with link aggregation
Stacking with open standards based interfaces
Stateful Inspection Firewall
BGP-4 option
IPv6 option
Load Balancer option
Support up to 255 VLANs
Private VLANs
Bandwidth limiting
Broadcast and multicast traffic control
MVR
IPsec
L2TP
IP RIP v1 and v2
OSPF v2
VRRP
TACACS+
802.1x
SNMPv3
Redundant power supply option
2 uplink bays
Return on Investment
Today's economy demands that network
investments provide a Return On Investment
sooner rather than later. Cost effectiveness is
achieved three ways. First, Rapier 'i' is the first
Layer 3 switch with an integrated WAN router.
Networks using a Layer 3 switch that does not
support WAN routing need to incorporate
additional router equipment at extra expense.
Second, Rapier 'i' has three optional feature
licences so you only pay for the specialized
features you need. Third, the Rapier 'i' series of
switches offer the greatest variety of uplinks at
the lowest cost.
www.alliedtelesis.com
RAPIER 'i' SERIES | WAN Capable Layer 3 Fast Ethernet Switches
Choose from 100FX, copper Gigabit, or fiber
Gigabit modules. Alternatively, choose
unpopulated GBIC module and populate it with
one of five GBIC types from Allied Telesis.
asymmetric and each port can be set to
different values. An additional benefit is that loop
back ports are not required.
Stacking
The Rapier 'i' series offers an unmatched
combination both switching and routing
capabilities coupled with a flexible set of
specialized features and uplink options.
Fabulous Fiber
With 16 fiber 100FX ports the Rapier 16fi is
uniquely suited to demanding environments
where not only the full-feature richness and
switching performance of the Rapier 'i' switch is
needed, but also where cable security and
electro-magnetic immunity (EMI) are
considerations. As well as performing under
these demanding environments the 16fi offers
the flexibility to provide access to the end
station or to perform as an aggregation device.
Due to the exceptional cable length afforded by
16fi's 100FX ports, networks that require an
aggregation switch that provides routing
between distant sites of up to 2000 meters can
be comfortably met.
Stacking provides Web and CLI based
management of up to nine switches with the
same effort as for one switch.The Allied Telesis
solution uses open standards interfaces as
stacking links so that many switches can be
stacked across different sites, which is not
possible using the proprietary stacking cable
solutions. Also the use of open standards
interfaces avoids the use of expensive
specialized hardware with limited topologies.
Redundant Power Supply
AC models of Rapier 'i' series switches have a
Redundant Power Supply (RPS) connector on
their rear panel, and use the AT-RPS8000
(redundant power supply).The AT-RPS8000 is a
chassis that holds up to four removable ATPWR8000 RPS units.To provide backup power
to Rapier 'i' series switches, each switch must be
connected to an AT-PWR8000 power unit, and
the power unit must be installed in an ATRPS8000 chassis.
IPv6 - The Future
Don't be shut out of the next generation of the
Internet Protocol, IPv6.The Rapier series
enables networks to take advantage of IPv6's
important benefits:
• Addresses are 16Bytes long in contrast to
IPv4's 4Byte addresses.
• Globally unique addresses with more levels of
addressing hierarchy, to reduce the size of
routing tables.
• Auto-configuration of addresses by hosts.
• Improved scalability of multicast routing, by
adding a 'scope' field to multicast addresses.
• A new type of address, the 'anycast address,'
which is used to send a packet to any one of
a group of devices.
Bandwidth Limiting
All Rapier 'i' series switches come with
asymmetric bidirectional bandwidth limiting, per
port or per QoS traffic class, at no additional
cost. With bandwidth limiting, Network Service
Providers can define throughput levels for each
customer and sell their various service levels at
tiered prices.These features are ideal to manage
different applications like VoIP, Web browsing,
Video and email to manage fee-based
customers.The Rapier 'i' bandwidth limiting
feature provides the smallest granulation
available in Layer 3 products. Service Providers
can define ingress limits down to 64Kbps
segments and egress limits down to 1Mbps
segments.The segment definitions can be
Allied Telesis
About Allied Telesis
Allied Telesis was founded in 1987 and now has
offices around the globe, more than 2,800
employees and over $500M of worldwide
annual revenue.The attributes which have led
Allied Telesis to achieve its leading position in
the enterprise, operator and connectivity
business segments can be summarised by four
key elements: its business focus on networking
technology for professional markets, where
Allied Telesis has proved to be the only
company capable of providing a total end-toend solution at a high price/performance ratio;
the ability to handle every aspect of its own
products from design to marketing; the
development of components and solutions
which accommodate flexible, efficient and
reliable network construction; and support from
sound warranty terms and quality services.
Allied Telesis connects the IP world efficiently
thanks to affordable and highly reliable network
solutions. For more information see:
www.alliedtelesis.com
Performance
Rapier 16fi: 9.6Gbps switching fabric, 5.4Mpps
forwarding rate
Rapier 24i: 9.6Gbps switching fabric, 6.6Mpps
forwarding rate
Rapier 48i: 9.6 x 2 = 19.2Gbps switching fabric,
10.1Mpps forwarding rate
14,880pps for 10Mbps Ethernet
148,800pps for 100Mbps Ethernet
1,488,000pps for 1000Mbps Ethernet
Advanced switching ASIC
MAC addresses 8K
Buffer Memory 4MB
VLANs 255
Half/Full Duplex
Auto-negotiation
Auto-MDI/MDIX
Reliability
Rapier 16fi 120,000 MTBF
Rapier 24i 640,000 MTBF
Rapier 48i 197,000 MTBF
Interface Connections
10/100TX Shielded RJ-45
100FX Multi-Mode fiber SC or MT
1000SX Multi-Mode fiber SC
1000LX Single-Mode fiber SC
1000T Shielded RJ-45
Power Characteristics
Voltage: 100-240vAC
Frequency: 50-60Hz
Power consumption max: 95W
Environmental Specifications
Operating Temp: 0°C to 40°C (32°F to 104°F)
Non-Operating Temp: -25°C to 70°C (-13°F
to 158°F)
Relative Humidity: 95% non-condensing
Operating Altitude: 3,050 Metres (10,000ft)
Acoustic Noise
46.0 dB
Physical Characteristics
Rapier 16fi, Rapier 24i and Rapier 48i,
Height: 66mm (2.6") 1.5 RU
Width: 440mm (17.3")
Depth: 356mm (14")
Service and Support
Rapier 16fi
Allied Telesis provides value-added support
services for its customers under its Net.CoverSM
programs. For more information on Net.CoverSM
support programs available in your area, contact
your Allied Telesis sales representative or visit
our website: www.alliedtelesis.com
Unit weight: 6.4kg (14.1lbs)
Packaged weight: 8.0kg (17.6lbs)
Mounting: 19" rackmountable, hardware included
Rapier 24i
Unit weight: 6.2kg (13.7lbs.)
Packaged weight: 7.8kg (17.2lbs)
Mounting: 19" rackmountable, hardware included
www.alliedtelesis.com
RAPIER 'i' SERIES | WAN Capable Layer 3 Fast Ethernet Switches
Rapier 48i
Standards and Protocols
Unit weight: 6.8kg (15.0lbs)
Packaged weight: 8.4kg (18.5lbs)
Mounting: 19" rackmountable, hardware included
Software Release 2.9.1
Redundant Power Supplies
AT-RPS8000-xx
4 slot redundant power supply chassis (includes
one power module)
Height without rubber feet: 66mm (2.6")
Height with rubber feet: 71mm (2.8")
Width: 440mm (17.3")
Depth excluding projections: 357mm (14.1")
Depth including projections: 400mm (15.8")
Weight: 6.9kg (15.2lbs), packed weight 8.7kg
(19.2lbs)
Where xx =
10
20
30
40
50
for U.S. power cord
for no power cord
for U.K. power cord
for Asia/Pacific power cord
for European power cord
AT-PWR8000
Redundant Power Supply module
Height: 64mm (2.52")
Width: 108mm (4.25")
Depth: 300mm (11.81")
Weight: 1.1kg (2.4lbs), packed weight 1.9kg
(4.2lbs)
Electrical/Mechanical Approvals
UL 1950
CSA 22.2 No. 950
EN 60950 (TUV)
FCC Class A
EN55022 Class A
EN500082-1
VCCI Class A
Country of Origin
Singapore
Allied Telesis
BGP-4
RFC 1771 Border Gateway Protocol 4
RFC 1997 BGP Communities Attribute
RFC 1998 Multi-home Routing
RFC 2385 Protection of BGP Sessions via the TCP MD5
Signature Option
RFC 2439 BGP Route Flap Damping
RFC 2858 Multiprotocol Extensions for BGP-4
RFC 2918 Route Refresh Capability for BGP-4
RFC 3065 Autonomous System Confederations for BGP
RFC 3392 Capabilities Advertisement with BGP-4
Encryption
RFC 1321 MD5
RFC 2104 HMAC
RFC 2451 The ESP CBC-Mode Cipher Algorithms
FIPS 180 SHA-1
FIPS 186 RSA
FIPS 46-3 DES
FIPS 46-3 3DES
Ethernet
RFC 894 Ethernet II Encapsulation
IEEE 802.1D MAC Bridges
IEEE 802.1Q Virtual LANs
IEEE 802.2 Logical Link Control
IEEE 802.3ab 1000BASE-T
IEEE 802.3ac VLAN TAG
IEEE 802.3ad (LACP) Link Aggregation
IEEE 802.3u 100BASE-T
IEEE 802.3x Full Duplex Operation
IEEE 802.3z Gigabit Ethernet
GARP
GVRP
Frame relay
RFC 1490, 2427 Multiprotocol Interconnect over Frame
Relay
ANSI T1S1 Frame relay
General Routing
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 903 Reverse ARP
RFC 925 Multi-LAN ARP
RFC 950 Subnetting, ICMP
RFC 1027 Proxy ARP
RFC 1055 SLIP
RFC 1122 Internet Host Requirements
RFC 1144 Van Jacobson's Compression
RFC 1256 ICMP Router Discovery Messages
RFC 1288 Finger
RFC 1332 The PPP Internet Protocol Control Protocol
(IPCP)
RFC 1378 The PPP AppleTalk Control Protocol (ATCP)
RFC 1518 CIDR
RFC 1519 CIDR
RFC 1542 BootP
RFC 1552 The PPP Internetworking Packet Exchange
Control Protocol (IPXCP)
RFC 1570 PPP LCP Extensions
RFC 1582 RIP on Demand Circuits
RFC 1661 The Point-to-Point Protocol (PPP)
RFC 1701 GRE
RFC 1702 GRE over IPv4
RFC 1762 The PPP DECnet Phase IV Control Protocol
(DNCP)
RFC 1812 Router Requirements
RFC 1877 PPP Internet Protocol Control Protocol
Extensions for Name Server Addresses
RFC 1918 IP Addressing
RFC 1962 The PPP Compression Control Protocol (CCP)
RFC 1968 The PPP Encryption Control Protocol (ECP)
RFC 1974 PPP Stac LZS Compression Protocol
RFC 1978 PPP Predictor Compression Protocol
RFC 1990 The PPP Multilink Protocol (MP)
RFC 2125 The PPP Bandwidth Allocation Protocol (BAP)
/ The PPP Bandwidth Allocation Control Protocol (BACP)
RFC 2131 DHCP
RFC 2132 DHCP Options and BOOTP Vendor Extensions.
RFC 2390 Inverse Address Resolution Protocol
RFC 2516 A Method for Transmitting PPP Over Ethernet
(PPPoE)
RFC 2661 L2TP
RFC 2822 Internet Message Format
RFC 2878 PPP Bridging Control Protocol (BCP)
RFC 3046 DHCP Relay Agent Information Option
RFC 3232 Assigned Numbers
RFC 3993 Subscriber-ID Sub-option for DHCP Relay
Agent Option*
"IPX Router Specification", v1.2, Novell, Inc., Part
Number 107-000029-001
AppleTalk
http://www.iana.org/assignments/bootp-dhcp-parameters
BootP and DHCP parameters
General Routing and Firewall
RFC 3022 Traditional NAT
draft-ietf-ipsec-nat-t-ike-08.txt Negotiation of NATTraversal in the IKE
draft-ietf-ipsec-udp-encaps-08.txt UDP Encapsulation of
IPsec Packets
IP Multicasting
RFC 1075 DVMRP
RFC 1112 Host Extensions
RFC 1812 Router Requirements
RFC 2236 IGMPv2
RFC 2362 PIM-SM
RFC 2715 Interoperability Rules for Multicast Routing
Protocols
RFC 3973 PIM-DM
draft-ietf-idmr-dvmrp-v3-9 DVMRP
draft-ietf-magma-snoop-02 IGMP and MLD snooping
switches
IPsec
RFC 1828
RFC 1829
RFC 2395
RFC 2401
RFC 2402
RFC 2403
RFC 2404
IP Authentication using Keyed MD5
IPsec algorithm
IPsec Compression - LZS
Security Architecture for IP
AH - IP Authentication Header
IPsec Authentication - MD5
IPsec Authentication - SHA-1
www.alliedtelesis.com
RAPIER 'i' SERIES | WAN Capable Layer 3 Fast Ethernet Switches
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
2405
2406
2407
2408
2409
2410
2411
2412
3173
IPsec Encryption - DES
ESP - IPsec encryption
IPsec DOI
ISAKMP
IKE
IPsec encryption - NULL
IP Security Document Roadmap
OAKLEY
IPComp - IPsec compression
IPv6
RFC 1981 Path MTU Discovery for IPv6
RFC 2080 RIPng for IPv6
RFC 2365 Administratively Scoped IP Multicast
RFC 2375 IPv6 Multicast Address Assignments
RFC 2460 IPv6
RFC 2461 Neighbour Discovery for IPv6
RFC 2462 IPv6 Stateless Address Autoconfiguration
RFC 2463 ICMPv6
RFC 2464 Transmission of IPv6 Packets over Ethernet
Networks
RFC 2465 Allocation Guidelines for Ipv6 Multicast
Addresses Management Information Base for IP Version
6: Textual Conventions and General Group
RFC 2466 Management Information Base for IP Version
6: ICMPv6 Group
RFC 2472 IPv6 over PPP
RFC 2526 Reserved IPv6 Subnet Anycast Addresses
RFC 2529 Transmission of IPv6 over IPv4 Domains
without Explicit Tunnels
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 2711 IPv6 Router Alert Option
RFC 2851 Textual Conventions for Internet Network
Addresses
RFC 2893 Transition Mechanisms for IPv6 Hosts and
Routers
RFC 3056 Connection of IPv6 Domains via IPv4 Clouds
RFC 3307 Allocation Guidelines for IPv6 Multicast
Addresses
RFC 3513 IPv6 Addressing Architecture
RFC 3315 DHCPv6
RFC 3484 Default Address Selection for IPv6
RFC 3587 IPv6 Global Unicast Address Format
RFC 3596 DNS Extensions to support IPv6
RFC 3810 Multicast Listener Discovery Version 2 (MLDv2)
for IPv6
Management
RFC 1155 MIB
RFC 1157 SNMP
RFC 1212 Concise MIB definitions
RFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1515 Definitions of Managed Objects for IEEE
802.3 MAUs
RFC 2011 SNMPv2 MIB for IP using SMIv2
RFC 2012 SNMPv2 MIB for TCP using SMIv2
RFC 2096 IP Forwarding Table MIB
RFC 2576 Coexistence between V1, V2, and V3 of the
Internet-standard Network Management Framework
RFC 2578 Structure of Management Information Version
2 (SMIv2)
RFC 2579 Textual Conventions for SMIv2
RFC 2580 Conformance Statements for SMIv2
RFC 2665 Definitions of Managed Objects for the
Ethernet-like Interface Types
Allied Telesis
RFC 2674 Definitions of Managed Objects for Bridges
with Traffic Classes, Multicast Filtering and Virtual LAN
Extensions (VLAN)
RFC 2790 Host MIB
RFC 2819 RMON (groups 1,2,3 and 9)
RFC 2856 Textual Conventions for Additional High
Capacity Data Types
RFC 2863 The Interfaces Group MIB
RFC 3164 Syslog Protocol
RFC 3289 Management Information Base for the
Differentiated Services Architecture
RFC 3410 Introduction and Applicability Statements for
Internet-Standard Management Framework
RFC 3411 An Architecture for Describing SNMP
Management Frameworks
RFC 3412 Message Processing and Dispatching for the
SNMP
RFC 3413 SNMP Applications
RFC 3414 User-based Security Model (USM) for SNMPv3
RFC 3415 View-based Access Control Model (VACM) for
the SNMP
RFC 3416 Version 2 of the Protocol Operations for
SNMP
RFC 3417 Transport Mappings for the SNMP
RFC 3418 MIB for SNMP
RFC 3636 Definitions of Managed Objects for IEEE
802.3 MAUs
RFC 3768 VRRP
draft-ietf-bridge-8021x-00.txt Port Access Control MIB
IEEE 802.1AB LLDP
OSPF
RFC 1245 OSPF protocol analysis
RFC 1246 Experience with the OSPF protocol
RFC 2328 OSPFv2
QoS
RFC 2205 Reservation Protocol
RFC 2211 Controlled-Load
RFC 2474 DCSP in the IPv4 and IPv6 Headers
RFC 2475 An Architecture for Differentiated Services
IEEE 802.1p Priority Tagging
RIP
RFC 1058 RIPv1
RFC 2082 RIPv2 MD5 Authentication
RFC 2453 RIPv2
Security
RFC 959 FTP
RFC 1413 IDP
RFC 1492 TACACS
RFC 1779 X.500 String Representation of Distinguished
Names.
RFC 1858 Fragmentation
RFC 2284 EAP
RFC 2510 PKI X.509 Certificate Management Protocols
RFC 2511 X.509 Certificate Request Message Format
RFC 2559 PKI X.509 LDAPv2
RFC 2585 PKI X.509 Operational Protocols
RFC 2587 PKI X.509 LDAPv2 Schema
RFC 2865 RADIUS
RFC 2866 RADIUS Accounting
RFC 2868 RADIUS Attributes for Tunnel Protocol Support
RFC 3280 X.509 Certificate and CRL profile
RFC 3580 IEEE 802.1X Remote Authentication Dial In
User Service (RADIUS) Usage Guidelines
draft-grant-tacacs-02.txt TACACS+
draft-IETF-PKIX-CMP-Transport-Protocols-01 Transport
Protocols for CMP
draft-ylonen-ssh-protocol-00.txt SSH Remote Login
Protocol
IEEE 802.1x Port Based Network Access Control
PKCS #10 Certificate Request Syntax Standard
Diffie-Hellman
draft-ylonen-ssh-protocol-00.txt SSH Remote Login
Protocol
IEEE 802.1x Port Based Network Access Control
PKCS #10 Certificate Request Syntax Standard
Diffe-Hellman
Services
RFC 854 Telnet Protocol Specification
RFC 855 Telnet Option Specifications
RFC 856 Telnet Binary Transmission
RFC 857 Telnet Echo Option
RFC 858 Telnet Suppress Go Ahead Option
RFC 932 Subnetwork addressing scheme
RFC 951 BootP
RFC 1091 Telnet terminal-type option
RFC 1179 Line printer daemon protocol
RFC 1305 NTPv3
RFC 1350 TFTP
RFC 1510 Network Authentication
RFC 1542 Clarifications and Extensions for the Bootstrap
Protocol
RFC 1945 HTTP/1.0
RFC 1985 SMTP Service Extension
RFC 2049 MIME
RFC 2156 MIXER
RFC 2217 Telnet Com Port Control Option
RFC 2821 SMTP
SSL
RFC 2246 The TLS Protocol Version 1.0
draft-freier-ssl-version3-02.txt SSLv3
STP / RSTP
IEEE 802.1Q - 2003 MSTP (802.1s)1
IEEE 802.1t - 2001 802.1D maintenance
IEEE 802.1w - 2001 RSTP
VoIP
RFC 2543 SIP
G.711 A/µ law Pulse code modulation (PCM) of voice
frequencies
G.723.1 Dual rate speech coder for multimedia
communications transmitting at 5.3 and 6.3 kbit/s
G.729 A/B (Optional) Coding of speech at 8 kbit/s
using conjugate-structure algebraic-code-excited linearprediction (CS-ACELP)
H.323 v2 Packet-based multimedia communications systems
X.25
RFC 1356 Multiprotocol Interconnect on X.25 and ISDN
in the Packet Mode
ITU-T Recommendations X.25 (1988), X.121 (1988). X.25
1
It is not possible to guarantee correct L3 switching
between two VLANS that are members of different
MSTP instances.
www.alliedtelesis.com
RAPIER 'i' SERIES | WAN Capable Layer 3 Fast Ethernet Switches
Ordering Information
Network Service Modules
AT-AR040 Network Service Module2
GBIC Modules3 (for use with AT-A42)
AT-RP16fi/SC-xx
100FX (SC) 16 port managed Layer 3 switch, with 2
expansion bays and a WAN access bay
Order information: 990-001109-xx (RoHS Compliant)
4 PIC slots
Order number: 990-001299-00
1000T GBIC Copper
Order number: 990-97208-00
AT-AR041 Network Service Module
AT-G8SX-01
8 BRI ISDN (S/T) ports
Order number: 990-001300-00
500m SX GBIC, based on 50 micron MMF
220m SX GBIC, based on 62.5 micron MMF
Order number: 990-02023-00
AT-RP16fiMT-xx
100FX (MT) 16 port managed Layer 3 switch, with 2
expansion bays and a WAN access bay
Order information: 990-11937-xx (Not RoHS compliant)
AT-RP24i-xx
10/100TX 24 port managed Layer 3 switch, with RJ-45
connectors, 2 expansion bays and a WAN access bay
Order information: 990-001317-xx (RoHS Compliant)
AT-RP48i-xx
10/100TX 48 port managed Layer 3 switch, with RJ-45
connectors and 2 expansion bays
Order information: 990-11935-xx (Not RoHS compliant)
Where xx =
10
20
30
40
50
80
for
for
for
for
for
for
U.S. power cord
no power cord
U.K. power cord
Australia power cord
Europe power cord
-48v DC power supply
WAN Access Options
Port Interface Card (PIC) Options
AT-AR020
Single software configurable E1/T1 interface that
supports channelized / unchannelized Primary Rate
ISDN / Frame Relay2
Order Number: 990-001304-00
AT-AR021S (V2)
SSingle basic rate ISDN S/T interface
Order Number: 990-001103-00
AT-AR023
Single synchronous port up to 2Mbps to an external
CSU/DSU (AT-V.35-DTE-00 or AT-V.21-DTE-00 cable
required)
Order number: 990-001104-00
AT-AR024
Four asynchronous RS-232 interfaces to 115Kbps
Order number: 990-001105-00
AT-AR027
Two VoIP FXS ports
Order number: 990-001356-00
Allied Telesis
AT-G8T
AT-AR042 Network Service Module
4 BRI ISDN (S/T) ports
Order number: 990-001303-00
AT-G8LX10
Encryption/Compression Module
AT-G8LX25
10km LX GBIC, based on 9 micron SMF
Order number: 990-11138-00
(for use with Rapier 16fi and Rapier 24i only)
AT-AR061
25km LX GBIC, based on 9 micron SMF
Order number: 990-11643-00
EPAC encryption/compression card
Order number: 990-11933-00 (Not RoHS compliant)
AT-G8LX40
Uplink Modules
AT-A35SX/SC
1 x 1000SX (SC) Gigabit fiber
Order information: 990-001086-00
40km LX GBIC, based on 9 micron SMF
Order number: 990-11644-00
AT-G8LX70
70km LX GBIC, based on 9 micron SMF
Order number: 990-11645-00
AT-A35LX/SC
1 x 1000LX (SC) Gigabit fiber
Order information: 990-001091-00
AT-A39/T
1 x 10/100/1000T (RJ-45) Gigabit copper
Order information: 990-11345-00 (Not RoHS compliant)
AT-A40/SC
1 x 100FX (SC) multimode fiber
Order information: 990-11920-00 (Not RoHS compliant)
Redundant Power Supplies
AT-RPS8000-xx
4 slot redundant power supply chassis (includes one
power module)
Order number: 990-11126-xx
Where xx = 10
20
30
40
50
for
for
for
for
for
U.S. power cord
no power cord
U.K. power cord
Asia/Pacific power cord
European power cord
AT-A40/MT
1 x 100FX (MT) multimode fiber
Order information: 990-11921-00 (Not RoHS compliant)
AT-PWR8000
Redundant Power Supply module
Order number: 990-11152-00
AT-A41/SC
1 x 100FX (SC) singlemode fiber
Order information: 990-11922-00 (Not RoHS compliant)
AT-A41/MT
1 x 100FX (MT) singlemode fiber
Order information: 990-11923-00 (Not RoHS compliant)
AT-A42
1 x Unpopulated GBIC module
Order information: 990-001092-00
2
Only two AT-AR020 allowed in AT-AR040
3
Please check for availability
www.alliedtelesis.com
RAPIER 'i' SERIES | WAN Capable Layer 3 Fast Ethernet Switches
Software Upgrade Options
AT-AR-RPFL3UPGRD
Rapier Full Layer 3 Upgrade
• IPX routing
• RSVP
• PIM DM
• PIM SM
• DVMRP
Order number: 980-10002-y
AT-RPADVL3UPGRD
Rapier Series Advanced Layer 3 Upgrade
• IPv6
• BGP4
• Load balancing4
Order number: 980-10024-y
AT-RPSecPK-00
Rapier Security Pack Upgrade
• Firewall SMTP
• Proxy
• HTTP Proxy
Order number: 980-10030-y
AT-AR-3DES
3DES Encryption option (requires AR061)
Order number: 980-10000-y
Where y =
00 for 1 shot
01 for 1 licence
05 for 5 licences
10 for 10 licences
25 for 25 licences
50 for 50 licences
100 for 100 licences
250 for 250 licences
4
Load balancer requires release 2.5.1 or later and
AT-RPSecPK.
USA Headquarters | 19800 North Creek Parkway | Suite 200 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
www.alliedtelesis.com
© 2006 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-00434-00 Rev V