Matsui Freeview TV receiver User`s manual

Quick Start Guide
English
1. Checking Accessories
Quick Start Guide
User’s Manual
Remote Control
& Batteries
HDMI Cable
Manual &
Quick Start Guide
HUMAX Wi-Fi USB Adapter
(Supplied with HDR-2000T/1TB/WD)
Ethernet Cable
AC Adapter
(Supplied with HDR-2000T, HDR-2000T/1TB/WD)
Note:
• The accessories may vary according to area.
• HUMAX Wi-Fi USB Adapter is available as optional accessory for other Humax models.
2. Product Overview
Front Panel
STANDBY
Switches between operation
and standby modes.
Status LED
Blue lights while in operation, red lights
while in standby or while recording.
VOL-/VOL+ CH∧/CH∨
USB port
Connect a USB storage device.
(Only for HDR-2000T, HDR-2000T/1TB/WD)
Note: The image shown may differ from the actual product.
1
Quick Start Guide
Rear Panel
ANTENNA IN
Connect your main aerial.
ANTENNA OUT
Connect to the TV or VCR using
an RF cable.
TV SCART
Connect to the TV using a TV
SCART cable.
VIDEO
Connect to the TV or VCR
using an RCA cable.
AUDIO
Connect to the TV or VCR
using an RCA cable.
SPDIF
Connect to the audio
system using an S/PDIF
cable (digital audio).
ETHERNET
Connect an Ethernet cable.
USB Port
Connect a USB storage
device.
HDMI
Connect to the TV using
an HDMI cable.
DC
Connect the AC adapter.
Note: The image shown may differ from the actual product.
2
Quick Start Guide
English
Remote Control (Only for HDR-2000T, HDR-2000T/1TB/WD)
To control the product please make sure that the PVR mode is selected on the remote control.
1
➊
PVR
Controls your PVR.
TV
Controls your TV.
STANDBY
Switches between operation and standby modes.
MUTE
Mutes audio
TEXT
Enters the digital text service
LIST
Displays the channel list.
TV Portal
Access to Humax TV Portal.
MENU
Displays the main menu.
Playback
Control
Buttons
REC Record, tt Rewind, u/II Play/Pause,
uu Fast Forward,
Instant Replay, Stop,
Skip
MEDIA
Displays the media list.
2
GUIDE
Displays the programme guide
Arrow
Moves the cursor up, down, left or right.
OK
Selects a menu or confirms.
EXIT
Exits all On-Screen Display (OSD) screens
BACK
Returns to the previous screen.
VOLUME
YELLOW
BLUE
GREEN
Adjusts the audio
volume.
YELLOW
BLUE
GREEN
RED
RED
YELLOW
BLUE
GREEN
RED
Note:
• The image shown may differ from the actual product.
• Some playback control buttons may not function depending on the content/media files you are
viewing.
3
Quick Start Guide
➋
i
Displays the channel and programme information.
OPT+
Displays the channels attributes.
P ∧/∨
Changes the channel or page.
Colour
Colour keys for interactive applications.
Numeric
0-9
SUB
Displays the subtitle language list.
AD
Displays the audio description.
2
Inserting Batteries
4
Battery
1. Press the hook upward and lift the
battery cover off.
2. Insert the batteries (supplied)
matching the plus(+) and minus(-)
at each end.
3. Close the cover.
4. Press the PVR button at the top of
the remote control.
Quick Start Guide
English
Remote Control (Only for HDR-1800T)
1
➊
MUTE
Mutes audio.
TV/RADIO
Switches between TV and radio modes.
STANDBY
Switches between operation and standby modes.
SUB
Changes the subtitle language.
AUDIO
Displays the audio description.
TEXT
Enters the digital text service.
WIDE
Sets the display format.
LIST
Displays the channel list.
Playback
Control
Buttons
REC Record, tt Rewind, u/II Play/Pause,
uu Fast Forward,
Instant Replay, Stop,
Skip
MEDIA
Displays the media list.
GUIDE
Displays the programme guide
2
Arrow
Moves the cursor up, down, left or right.
OK
Selects a menu or confirms.
EXIT
Exits all On-Screen Display (OSD) screens
BACK
Returns to the previous screen.
VOLUME
YELLOW
BLUE
GREEN
Adjusts the audio
volume.
YELLOW
BLUE
GREEN
RED
RED
YELLOW
BLUE
GREEN
RED
Note:
• The image shown may differ from the actual product.
• Some playback control buttons may not function depending on the content/media files you are
viewing.
5
Quick Start Guide
➋
i
Displays the channel and programme information.
OPT+
Displays the channels attributes.
P ∧/∨
Changes the channel or page.
Colour
Colour keys for interactive applications.
Numeric
0-9
TV Portal
Access to HUMAX TV Portal.
MENU
Displays the main menu.
2
Inserting Batteries
6
Battery
1. Press the hook upward and lift the
battery cover off.
2. Insert the batteries (supplied)
matching the plus(+) and minus(-)
at each end.
3. Close the cover.
Quick Start Guide
English
3. Connections
This section describes how to connect your product to match your particular devices setup and to gain
optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other
devices. Select the most appropriate procedure depending on the device you have.
Note: If you encounter any problems setting up your product, please contact your local retailer or Humax
Customer Helpline.
HDMI
TV SCART
DVI Connecter
RCA Cable
SCART Cable
3
HDMI Cable
HDMI Cable
1
2
4
S/PDIF Cable
5
Ethernet Cable
WLAN USB Dongle
LAN
Router
Wireless Router
7
Quick Start Guide
Connecting the Antenna
Connect the aerial to the ANTENNA IN.
Connecting the TV
You can select one of the following connections depending on the device you have.
➊ TV with the HDMI connector
For the best picture quality, connect the product and TV using an HDMI cable.
When using an HDMI cable it is not necessary to also use a scart cable.
➋ TV with the DVI connector
For very good picture quality, connect the product and TV using an HDMI cable and a HDMI-to-DVI
converter for video.
You will also require an RCA cable(Audio L/R) connected to the necessary connection(s) on your TV/
Display for Audio.
Please refer to your TV/Display user manual for further information on the connections required for Audio.
➌ TV with the SCART connector
For good picture quality, connect the product and TV using a SCART cable.
For additional audio connections you can either
1. Connect the product and TV using an RCA cable (Audio L/R).
2. When using the digital audio system, connect the product and the digital audio system using
an S/PDIF cable.
Connecting the Network
➍ Connecting to the LAN
Connect one end of the Ethernet cable to the receiver and the other end to the LAN router.
➎ Connecting to the Wireless LAN
You can connect to the wireless network with HUMAX Wi-Fi USB Adapter (Optional accessory).
1.
2.
3.
4.
5.
Insert the HUMAX Wi-Fi USB Adapter into a USB port.
Go to Menu > Settings > System > Internet Setting > Configure Wi-Fi.
If the Configure Wi-Fi menu is disabled, check that the Wi-Fi USB Adapter is inserted correctly.
Select the network name from the list of available wireless networks.
Select the Security Type of your wireless network. The default is WPA-PSK(TKIP).
Select Password and press the OK button. Enter the password and press the YELLOW button to
confirm. Select APPLY and press the OK button.
6. After the wireless network is connected, press the OK button.
Note: HUMAX Wi-Fi USB Adapter is supplied free with HDR-2000T/1TB/WD but available as optional
accessory for other Humax models.
8
Quick Start Guide
English
4. Powering On
1. Connect the power cord of the product to a wall outlet.
2. Power on by pressing the STANDBY button on the remote control or touching the STANDBY button
at the front of the product.
Note:To control the product please make sure that the PVR mode is selected on the remote
control. (Only for HDR-2000T, HDR-2000T/1TB/WD)
9
Quick Start Guide
5. Installation Wizard
When powering on your product for the first time after purchase or performing the factory default in
menu, the Installation Wizard will appear on your TV screen.
If you do not see the Installation Wizard please check:
1. Your TV is switched on.
2. The cables between the product and your TV are connected correctly.
3. Your TV is on the correct input (AV channel) for the connection you are using. (Please refer to your
TV/Display user manual for further information to select the correct Input/channel.)
Note: If you exit the installation wizard without fully completing the channel searching procedure, you
may not have all of the channels available. In this case, you can use the Settings > Installation
menu to search for more channels.
1. Preferred Language
Select a language for audio and subtitles and
press the OK button.
2.Display
Set the video output settings you require.
To continue to the next step select Next and
press the OK button.
Screen Ratio:
16:9 - Widescreen TV
4:3: Traditional TV
Display Format:
Select your Required Display Format, the
image at the bottom of the screen will indicate
how the picture will appear on your TV.
Resolution:
Select your Required Video Resolution (576i, 576p, 720p, 1080i, 1080p)
Note: Some TVs/Displays may not support all Video Resolutions, to change this in the future please press
the OPT+ button and select Resolution.
10
Quick Start Guide
English
3. Automatic Search
Channel search will begin automatically.
When the search has completed press the OK
button to save the channels found during the
search.
4.Result
The results of the Installation Wizard are
displayed on screen.
Select Finish and press the OK button to
complete the Installation Wizard.
11
Quick Start Guide
6. Menu Overview
Preferences
• Parental Control
• Language
• Time
• Video
• Audio
• Recording
• Screen Display
Channel List
TV Guide
Video
Music
Photo
HUMAX TV Portal
Settings
Edit Channels
• Edit Channel List
• Edit Favourite List
Installation
• Automatic Search
• Manual Search
• Software Update
• Antenna Power
• Factory Default
System
• System Information
• Signal Detection
• Power Management
• Data Storage
• Internet Setting
How to Navigate
Displays the Menu OSD
GREEN
RED
BLUE
GREEN
or
BLUE
YELLOW
GREEN
BLUE
GREEN
YELLOW
BLUE
12
YELLOW
Selects (Enters) a menu or confirms a selection
BLUE
GREEN or adjusts
RED
Changes
the option
YELLOW
Goes back
to the previous screen
RED
GREEN
REDthe number (0~9)
Enters
RED
RED
BLUE
Moves among menus or options
GREEN
RED
Exit all On-Screen
GREEN
RED
BLUE
Basic Operation
English
Changing Channels
You can change the channels in several ways.



Press the P∧/P∨ button.
Enter the channel number directly. (0-9)
Go to the channel list or TV guide and select a channel.
Volume / Mute / Audio Description


To adjust the audio volume, press the +/- button.
To mute the audio temporarily, press the MUTE button.
Setting Audio Description
You can set to narrate the on-screen visuals which is used for visually impaired viewers.
1. Press the AD or AUDIO button.
Each time you press this button, the Audio
Description soundtrack will be selected.
2. Select the audio direction (if available) using
the t/u arrows.
Note:
• The mute function remains set while you
change channels.
• You cannot set the audio direction when the
programme is broadcast in Dolby Digital.
Subtitle
You can select the subtitle language when subtitle
information is provided.
Press the SUB button.
Each time you press this button, the subtitle
language changes.
Note:
• You can choose to always display the subtitle
when available.
• The icon appears when the DVB subtitle is
supported.
13
Basic Operation
Programme Information (i-plate)
The i-plate is an information banner that is displayed for a certain period of time whenever you change
channels. Press the i button while watching a progamme to display the i-plate. Press the EXIT button to
hide.
Playing time
Icons
Programme name
Channel number and name
Signal strength and quality
Current time and date
Group name
 Viewing detailed programme information
Press the i button again while the i-plate is displayed.
 Viewing previous/next programme information
Press the t/u button while the i-plate is displayed. Press the OK button to set reminders for future
programmes.
 Viewing programme information of other channels
Press the p/q button while the i-plate is displayed. Press the OK button to change to the selected channel.
Icons
The icons represent the information and services provided.
AD
Locked programme
Series Programme
Pay TV / encrypted programmes (CAS icons)
Resolution
Parental guidance programme
HD programme
Scheduled programme
(Red: Record, Blue: Reminder)
Multiaudio
Subtitle
Dolby Digital audio
Dolby Digital Plus audio
Audio Description
Note: Programme information is not displayed when there is no programme information.
Text and Interactive Services
If your chosen channel has digital text features, you can access them. Digital text services often load
automatically shortly after the digital text window is displayed. In which case, simply follow the on screen
instructions. (Press colour buttons)
14
1. Press the TEXT button to access digital text.
2. Press the TEXT button again to return to normal viewing.
3. Press the P∧/P∨ button to exit this service.
Channel List
English
Editing Channels in Channel List
You can lock or delete each channel in the channel list, as well as in menu. To edit the multiple channels,
go to MENU >Settings > Edit Channels.
Locking / Deleting Channels
1. Select a channel you want to edit and press
the GREEN button.
2. Select an option.
 Lock: Select On or Off.
 Delete: Press the OK button.
3. Select OK to save and exit.
Note: The default password is 0000. If you have
forgotten your password, please contact
Humax Customer Support.
Setting Favourite Channels
YELLOW
BLUE
GREEN
Display
RED
Select
YELLOW groups.
BLUE
You can select your favourite channels and include them in the five favourite
1.
2.
3.
4.
Confirm
GREEN
Select a channel and press the GREEN button.
Select Favourite.
YELLOW
BLUE
GREEN
Select a favourite group you want to include the channel in and press the OK button.
To remove a channel from a favourite group, select the group and press the OK button again.
Select OK to save and exit.
RED
RED
15
ELLOW
Managing Channels
Editing Channels
The Edit Channel List menu will help you delete or lock multiple channels.
MENU  Settings  Edit Channels  Edit Channel List
Group name
Marked / Total channels
YELLOW
BLUE
GREEN
RED
Function buttons
: Coloured button
Select
YELLOW BLUE
BLUE
GREEN
Mark/Confirm
GREEN
RED
RED
YELLOW
BLUE
Page up/down
GREEN
RED
Note:
•
: Locked channel, : Pay TV / encrypted programmes (CAS icons)
• Press
or EXIT
YELLOW the MENU
BLUE
GREEN button
RED to exit. Press the BACK button to return to the previous screen.
Deleting Channels
1. Select the channels using the p/q and OK button.
2. Press the RED button.
Locking / Unlocking Channels
1. Select the channels using the p/q and OK button.
2. Press the BLUE button.
3. Select Lock. To unlock, select Unlock.
16
Managing Channels
English
Advanced Options
Changing Group
To list the channels of other groups, press the GREEN button and select a group you want.
Changing Background
You can change the channel displayed in the background while editing.
1. Select the channel you want to watch.
2. Press the YELLOW button. The displayed channel will change.
Selecting / Releasing All Channels
1. Press the BLUE button.
2. Select Select All.
3. To release all, select Release All.
17
OW
Managing Channels
Editing Favourite Channels
The Edit Favourite List menu will help you add or remove channels from the favourite groups.
MENU  Settings  Edit Channels  Edit Favourite List
Group name
Marked / Total channels
Favourite group name
Function buttons
: Coloured or OPT+ button
Select
YELLOW BLUE
BLUE GREEN
GREEN
Mark/Confirm
RED
RED
YELLOW
BLUE
Page up/down
GREEN
RED
Note: Press the MENU or EXIT button to exit. Press the BACK button to return to the previous screen.
Adding / Removing Favourite Channels
YELLOW
BLUE
GREEN
RED
1. Press the YELLOW button and select the favourite group you want to edit.
2. To add channels to the favourite list, select the channels you want to add using the p/q and OK
button in the left column and then press the RED button. The added channels will appear in the right
column.
3. To remove channels from the favourite list, select the channels you want to remove in the right
column and then press the RED button.
Moving Channels
1. Select the channels using the p/q and OK button.
2. Press the RED button.
3. Move the selected channels to the location you want using the p/q and OK button.
Note: You can move the channels in the right column only.
Renaming Favourite Groups
1.
2.
3.
4.
18
Press the YELLOW button and select the favourite group you want to edit.
Press the OPT+ button
Select Rename.
Enter the name in the keyboard.
Managing Channels
English
Advanced Options
Changing Group
To list the channels of other groups in the left column, press the GREEN button and select a group you
want.
Changing Background
To list the channels of other groups in the left column, press the BLUE button and select a group you want.
Selecting / Releasing All Channels
1. Press the OPT+ button.
2. Select Select All.
3. To release all, select Release All.
19
TV Guide
The TV guide is an on-screen guide of grid type which displays the programme information of channels in
time and date order.
You can access the TV guide in several ways.
v Press the GUIDE button.
v Press the MENU button and select TV Guide.
Note: Press the GUIDE or EXIT button to exit. Press the BACK button to return to the previous screen.
Preview
Current time and date
Information of the selected
programme: channel number & name,
programme name, simple information,
favourite group, and icons
Time bar
Function buttons
: Coloured button
Select
YELLOW
YELLOW
BLUE BLUE
Tune/Reserve
GREEN GREEN
RED
Page up/down
RED
Note:
• Press the i button to view the detailed programme information.
• YELLOW: Scheduled
programme
(Red:
Record, Blue: Reminder), : Recording programme,
BLUE
GREEN
RED
: Present time
Watching Programmes
1. Select a programme and press the OK button. The programme will be displayed in the preview.
2. Press the OK button again to exit the TV guide and watch the programme.
20
TV Guide
English
Setting Reminders
1.
2.
Select a future programme and press the OK button.
Select Reminder and press the OK button.
Press the OK button again to cancel the reservation.
The reserved programmes will be added automatically in Schedule.
Note:
• If the programme is overlapped with another programme, adjust the reservation appropriately.
• If the channel is locked, you will be prompted to enter your password before watching.
The default password is 0000. If you have forgotten your password, please contact Humax Customer
Support.
• In standby mode the product will switch on to the channel when the programme starts.
• You can reschedule reminders or recordings. (Refer to Scheduling Reminders and Recordings.)
Advanced Options
Quick Navigation
Press the t/u button to move to the previous/next programme.
Press the tt/uu button to jump back/ahead two hours.
Press the / button to move to the previous/next day.
Changing Group
To list the channels of other groups, press the BLUE button and select a group you want.
Note: To search specific programmes, go to Find by pressing the GREEN button. (Refer to Finding
Programmes.)
21
TV Guide
Finding Programmes
Find will help you find the programmes more specifically using the keyword or genre.
By Keyword
1.
2.
3.
4.
Press the GREEN button.
Select Keyword and press the u button.
Select a keyword and press the OK button.
Press the YELLOW button to confirm.
Note: To enter a new keyword, select New
Keyword.
By Genre
1.
2.
3.
4.
Press the GREEN button.
YELLOW
BLUE
Select Genre and press the u button.
Select a genre and press the OK button.
Select the specific genre and press the OK
button. (if provided)
GREEN
RED
Display
Confirm
Select
Page
up/down
YELLOW
BLUE
GREEN
RED
BLUE
GREEN
RED
BLUE
GREEN
RED
Note: YELLOW
YELLOW
BLUE
GREEN
RED
• Press the i button to view the detailed programme information.
• Press the OK button to watch a found programme. (Refer to Changing Channels.)
• You can set reminders or recordings for future programmes. (Refer to Setting Reminders or
Recordings.)
Scheduling Reminders and Recordings
Schedule list of reminders and recordings will
help you to manage them in more detail.
1. Press the YELLOW button.
2. You can add, edit or delete your reminders.
 To add, select New Reminder and press the OK
button.
 To edit, select a reminder and press the OK
button.
 To delete, select a reminder and press the BLUE
button.
3. Reservation will pop up. You can change
the options you want using the p/q/t/u,
NUMERIC(0~9) and OK buttons.
4. Select OK to save and exit.
YELLOW
BLUE
Display
Page
GREEN
Confirm
RED
YELLOW
Note:
up/down
• Press the i button to view the detailed
YELLOW
BLUE
GREEN
RED
programme
information.
YELLOW
BLUE
GREEN
RED
• You can easily set reminders or recordings in TV Guide, Find or i-plate navigation mode.
22
Select
UE
Recording and Playback
English
You can record programmes in the built-in hard disk drive and playback the recorded programmes
whenever you want.
Recording
You can watch another channel while recording a channel or record programmes from two different
channels at the same time.
Instant Recording
You can record the currently watching programme
instantly and change the recording duration.
To instantly record the current programme you are
watching, press the REC button.
The recording will start from the current broadcast
point and the record banner will be displayed for a
few seconds.
Press the STOP button to stop recording the
programme.
The recording will continue till the end of the
current programme. However, if the programme ends in less than ten minutes, it will continue till the end
of the next programme. When no programme information is provided, the recording will continue for two
hours.
Note: You can also press the REC button while in the Guide to start recording a current programme on a
different channel.
Delayed Recording
You can record the scenes of a live broadcast you have been watching until now by rewinding with the
time shifted recording function.
Find the starting point you want to record by using the REWIND, t or u buttons, then press the REC
button.
The recording will start from the point you select.
Changing Recording Duration
GREEN
1. Press the REC button on the currently
REDrecording channel.
2. Set the duration manually or select till the
end of the current prorgramme or the next
programme.
Record
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
23
Recording and Playback
Scheduled Recording
You can easily set the recording reservations in TV
Guide, Schedule or i-plate navigation mode.
While in the TV Guide highlight a future
programme and press the OK button.
 Select from:
Record Whole Series
Record the Whole Programme
 Press the OK button on a future programme
in i-plate and select either Record Series or
Record the Whole Programme.
(Refer to Programme Information.)

The recording will start at the scheduled time and the record banner will be displayed for a few seconds.
Press the STOP button to stop recording the programme.
Note:
• Press the GUIDE button to go to TV Guide.
• Press the GUIDE button and press YELLOW button to go to Schedule.
• Press the i button while watching a progamme to display the i-plate.
Editing Recording Schedule
You can edit or delete your reservations in
Schedule.
 To edit, select a reservation and press the OK
button. You can change the options such as
channel, date, time, repeat mode, etc.
 To delete, select a reservation and press the
OPT+ button.
BLUE
GREEN
24
RED
Record
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
UE
Recording and Playback
English
Recording Conflict
You can watch another channel while recording a channel or record programmes from two different
channels at the same time.
Recording Duration Conflict
When an instant recording conflicts with one of
the scheduled recordings (or reminders), you can
either;
 Record for the automatically modified duration.
 Cancel either of the scheduled recordings (or
reminders).
 Cancel the previous recording.
Watching Conflict
When a scheduled recording starts on a different
channel while you are watching a channel and
recording another channel, a record notice
will pop-up 30 seconds before the scheduled
recording starts.
 OK: The channel will change at the start time and
the scheduled recording will start automatically.
 Cancel: The scheduled recording will be
cancelled.
Scheduling Conflict
When a new scheduled recording conflicts
with one of the previously set recordings (or
reminders), you will be prompted to select up to
two programmes you want to keep.
Select the programme using the p/q and OK
button.
GREEN
RED
Record
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
25
Recording and Playback
Setting Recording Option
MENU  Settings  Preferences  Recording
Setting Padding Time
You can set the recording padding time in case
the recording starts earlier or ends later than
scheduled.
 Start Padding Time : Additional recording time
before the recording starts.
 End Padding Time : Additional recording time
after the recording ends.
Setting Jump Time
You can set the jump time to replay or skip scenes
during playback or time shifted recording.
 Instant Replay Time : 7 sec, 15 sec, 30 sec
 Skip Forward Time : 30 sec, 60 sec, 120 sec, 240 sec
Setting Automatic Option
Auto Delete: The oldest programme is deleted automatically to make the space for new programmes.
BLUE
Note:
• You can record radio programmes also.
• The record banner will be displayed with the i-plate whenever pressing the i button.
• You can change the recording duration by using the REC button for instant recording or by going to
MENU > TV Guide > Schedule for scheduled recording.
• When a new scheduled recording starts while a recording is already in progress, the record banner
will be displayed for a few seconds to inform you that the recording has been started. If you are not
watching the channel being recorded, a record notice will pop-up 30 seconds before the scheduled
recording starts, and the channel will switch to the scheduled programme automatically at the start
time.
• Pressing the STANDBY button while recording will not stop the recording. New recordings will start
even in standby mode.
• While watching a recording programme, you can trick-play using the playback control buttons such as
pause, fast rewind, instant replay, etc.
• You can record the digital TV or radio programmes only. The external AV inputs cannot be recorded.
• Make sure that there is enough free space before recording. If the free space on the hard disk drive is
insufficient, recording will stop. Recording HD programme requires more space than SD programme.
GREEN Recording
RED
one hour of HD and SD programmes may require 8 GB and 2~3 GB of hard disk space,
respectively. The space for recording one hour programme may differ depending on the programme.
• To view the recorded programme list, press the MEDIA or MENU button and select Video. (Refer to
Using Video List.)
26
Record
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
UE
Recording and Playback
English
Playback
You can playback the recorded programmes that are stored in the built-in hard disk drive.
Playing Recordings (Video)
You can access the recorded file list easily and play the recorded programmes.


Press the MEDIA button.
Press the MENU button and select Video.
Select a file and press the OK button. Playback will
start.
You can perform fast rewind, fast forward, and
pause while playing back a recorded file. The
green playbar is displayed when pressing the
PLAY/PAUSE, REWIND or FAST FORWARD button
while playing.
Play status
Present time
Start time
Play pointer
YELLOW
BLUE
GREEN
RED
YELLOW
BLUE
GREEN
RED
GREEN
Total time
RED
Playback Controls
RED
Play / Pause
Stop playback and go to live TV
Rewind
Fast Forward
Replay the scene
GREEN
RED
Skip the scene
Note:
• When you press the BACK button during playback, the playback stops.
• Chapters are made by dividing the recorded programme into eight portions.
• Refer to Media List > Using Video List for more details about the recorded files.
Record
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
27
Recording and Playback
Pausing and Rewinding Live TV (TSR)
Time Shifted Recording (TSR) allows you to pause a live broadcast and return to it later and continue
where you left off.
The TSR function automatically saves the programmes you watch to the built-in hard disk drive
temporarily.
TSR lasts for 120 minutes.
To pause the programme you are watching,
Press the PLAY/PAUSE button. Press the button again to return. Pause makes a time gap between the live
broadcasting point and watching point. The time gap is equivalent to the period the programme has been
paused.
Press the STOP button to close the time gap and go to live programme.
To rewind and watch missed scenes,
Press the REWIND button. Press the PLAY/PAUSE button at the point where you want to start watching.
You can pause, rewind or fast forward within the programme.
You can fast rewind to the start point. If you reach the start point while rewinding, the
programme is automatically played at the normal speed.
To fast forward and skip scenes,
Press the FAST FORWARD button. You can fast forward only when there is a time gap between the current
watching point and the live broadcasting point caused by pause or fast rewind. You can fast forward
up to the current broadcasting point. If you reach the live broadcasting point while fast forwarding, the
programme is automatically played at normal speed.
Note: Press the INSTANT REPLAY or SKIP button to instantly replay or skip scenes at regular intervals you
set in the menu. (Refer to Setting Jump Time.)
To record the Time Shift Recording buffer
Rewind to the point you wish to record and press the REC button on t he remote control.
Note: The recording will not appear immediately in the Media list as time is required to transfer the buffer
into a recording.
BLUE
GREEN
28
RED
Record
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
Media List
English
You can retrieve video, music or photo files from the built-in hard disk drive, the USB storage devices, or
with home network devices.
You can access Media List in several ways.



Press the MEDIA button.
Press the MENU button and select Video, Music or Photo.
Connect a USB storage device for media and select your desired media type.
Video
Lists TV/Radio recordings or video files.
Music
Lists music files.
Photo
Lists photo files.
Note:
• Press the MEDIA or EXIT button to exit. Press the BACK button to return to the previous screen.
• When you connect a USB storage device, the media type menu is displayed automatically.
• Select Copy to copy the media files to the different devices. (Refer to Using the Video List > Editing
Files.)
Switching Storage
1. Press the BLUE button to switch the storage.
2. Select the storage and press the OK button.
HDD: Displays the internal HDD.
USB: Displays each partition of the connected
USB storage devices. Select a USB.
Network: Displays the connected home network
devices. Select the server.
Switching Media
1. Press the YELLOW button to switch the media
type.
2. Select the media type and press the OK
button.
Video, Music, Photo
YELLOW
BLUE
GREEN
RED
Media On/Off
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
29
Media List
Note:
• USB ports on your product supply 800mA in total. This 800mA is shared among all devices connected
to product.
• Please connect power to a USB storage device which requires an external power supply. If not, the
device may not be recognized.
• Please connect a USB storage device with the cable offered by the device maker. If you use a cable
which is not offered by the device maker or an excessively long cable (max 5m), the device may not be
recognized.
• If the USB storage device is connected in standby mode, it will automatically be recognized when the
product is turned on.
• A USB storage device using an automatic recognition programme may not be recognized.
• A USB storage device which uses its own driver may not be recognized.
• The recognition speed of a USB storage device may depend on each device.
• Please do not disconnect or turn off the USB storage device while playing back. When the USB
storage device is suddenly separated or unplugged, the stored files or the USB storage device may be
damaged.
• Be sure to back up important files since data stored in a USB storage device may be damaged. We will
not be responsible for any data loss.
• If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up
to 4 partitions or USB memory devices.
• If the USB memory stick does not work properly, disconnect and reconnect it.
• Some USB storage devices may not be supported or operated smoothly.
• How fast a USB storage device is detected differs from device to device.
• USB storage devices below USB 2.0 are supported as well. But they may not work properly.
• The system may require a longer time to read large amounts of data stored in a USB device.
• Only one USB icon will appear even when there are more than one USB.
• The network icon is displayed only when the network has been connected.
• HUMAX cannot guarantee compatibility (operation and/or bus power) with all USB mass storage
devices and assumes no responsibility for any loss of data that may occur when connected to this unit.
YELLOW
30
BLUE
GREEN
RED
Media On/Off
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
Media List
English
Using Video List
You can play TV/Radio recordings or video files from the built-in hard disk drive, the USB storage devices,
or home network devices.
MENU  Video
Note:
• Press the YELLOW button to switch the media type.
• Press the BLUE button to switch the storage.
• Press the i button to view the detailed programme information.
Path
Storage
New recorded file
Recording file
Playing file
video file
Function buttons
: Coloured or OPT+ button
Note:
•
: Recording icon, : Playing icon ,
: HD icon, : CAS icon, : Lock icon
• When you record the whole series of the programme, the programmes will be recorded in the same
series folder.
Playing Files
Select a file and press the PLAY/PAUSE button. Playback will start from the recently viewed point.
To play multiple files successively, select the files using the RED button and press the PLAY/PAUSE button.
Using Play Options
1. Select a file and press the OK button.
2. Select a play option.
Resume Play: Plays from the recently viewed point.
Play from the Start: Plays from the start.
Delete: Deletes the selected files.
Rename: Renames the selected file.
Lock/Unlock: Locks or unlocks the selected files.
3. Press the OK button.
You can perform fast rewind, fast forward, and pause while playing back a recorded file. Refer to
YELLOW
BLUE Playback
GREEN
RED
Recording
and
> Playback
for details on playback control and playbar.
Media On/Off
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
31
Media List
Note:
• To play multiple files successively, select the files using the RED button and press the OK button.
When multiple files are selected, Resume Play and Rename are not available in Play Options.
• You will be prompted to enter the password when playing the locked files or the files with guidance
policy.
• Some playback control buttons may not function depending on the contents.
Editing Files
Deleting Files
1. Select the file(s) you want to delete and press
the OPT+ button.
2. Select Delete and press the OK button.
3. Select Yes and press the OK button.
Sorting Files
1. Press the OPT+ button.
2. Select Sort and press the OK button. The files
will be sorted in alphabetical order.
3. To sort the files in time order, repeat the above
procedure.
Note: Sorting files is available for video files only.
Locking Files
1.
2.
3.
4.
Select the file(s) you want to lock and press the OPT+ button.
Select Lock and press the OK button.
To unlock, press the OPT+ button again and select Unlock.
Enter the password.
Moving / Copying Files
1. Select the file(s) you want to move and press
the OPT+ button.
2. Select Move/Copy and press the OK button.
3. Select the folder or storage you want to move
the file(s) to and press the OK button.
Moving the file(s) within the same storage:
Select the folder you want to move the file(s) to
and press the OK button.
Copying the file(s) to another storage: Select
the storage and then select the folder to copy
the file(s) to. Press the OPT+ button to create the
folder.
Note:
• When moving a locked file, you will be prompted to enter the password.
• When a file is moved to a different storage, it will be copied. However, video recordings cannot be
YELLOW
GREEN
RED
copied
to other BLUE
storage devices.
32
Media On/Off
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
Media List
English
Renaming Files
1. Select the file you want to rename and press the OPT+ button.
2. Select Rename and press the OK button.
3. Enter the name of the file in the keyboard and press the YELLOW button.
Creating Folder
1. Press the OPT+ button.
2. Select New Folder and press the OK button.
3. Enter the name of the folder in the keyboard and press the YELLOW button.
YELLOW
BLUE
GREEN
RED
Media On/Off
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
33
Media List
Using Music List
You can play music files from the built-in hard disk drive, the USB storage devices, or with home network
devices.
MENU  Music
Note:
• Press the YELLOW button to switch the media type.
• Press the BLUE button to switch the storage.
Path
Storage
Title, Artist, Album
Function buttons
: Coloured or OPT+ button
Playing Files
Select a file and press the OK or PLAY/PAUSE button. All files in the folder will be played successively.
To play the selected files only, select the files using the RED button and press the OK or PLAY/
PAUSEbutton.
YELLOW
34
BLUE
GREEN
RED
Media On/Off
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
Media List
English
Music Player
The music player is displayed while playing the
music file(s).
YELLOW
GREEN
BLUE
GREEN
RED
RED
YELLOW
YELLOW
BLUE
GREEN
GREEN
RED
GREEN
BLUE
GREEN
RED
RED
Play / Pause
BLUE
BLUE
YELLOW
Stop the music player and display the list
RED
Play the previous song
Play the next song
Change the play mode
Exit the music player and go to live TV
Editing Files
Deleting, moving, renaming the music files or creating new folders are the same as in the video list. Refer
to Using Video List > Editing Files.
YELLOW
BLUE
GREEN
RED
Media On/Off
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
35
Media List
Using Photo List
You can play photo files from the built-in hard disk drive, the USB storage devices, or with home network
devices.
MENU  Photo
Note:
• Press the YELLOW button to switch the media type.
• Press the BLUE button to switch the storage.
Path
Storage
Thumbnail
Function buttons
: Coloured or OPT+ button
Photo Slideshow
Select a file and press the OK or PLAY/PAUSE
button. All files in the folder will be shown
successively.
To slideshow the selected files only, select the files
using the RED button and press the OK or PLAY/
PAUSE button.
The info banner is displayed while slideshow is
paused.
YELLOW
EN
RED
OW
BLUE
BLUE
GREEN
RED
YELLOW
GREEN
YELLOW
BLUE
GREEN
BLUE
GREEN
RED
RED
Play / Pause
Stop slideshow and display the photo list
Show the previous photo
Show the next photo
RED
Exit slideshow and go to live TV
YELLOW
36
BLUE
GREEN
RED
Media On/Off
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
Media List
English
Editing Files
Deleting, moving, renaming the photo files or creating new folders are the same as in the video list. Refer
to Using Video List > Editing Files.
Slide Mode
You can play music files during slideshow.
1. Press the OPT+ button.
2. Select Slide Mode and press the OK button.
Display Time: The duration a photo is displayed
Music Play: Select On to play music files during
slideshow.
Folder: Select the folder the music files in located
in using the RED button.
3. Select OK to save and exit.
YELLOW
BLUE
GREEN
RED
Media On/Off
Select
YELLOW
YELLOW
BLUE
GREEN YELLOW
Confirm
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
Enter 0~9
37
HUMAX TV Portal
English
TV APPS is the new name of HUMAX TV Portal which provides catch-up TV services and various web
applications.
You can access TV APPS in several ways.
Press the TV Portal button.
Press the MENU button and select HUMAX TV
Portal.
Note:
• Press the EXIT button to exit.
• Make sure to connect the network before
using this service.
• TV APPS service is subject to change without
notice.
• Read and agree to Privacy Policy to use certain
applications.
•
Creating Account
This screen shot will be different depending on
model type.
1. Go to the HUMAX server http://www.myhumax.net.
2. Click New account and follow the instruction to create your personal account.
Note:
• You need to enter the registration code to register your receiver to the HUMAX server.
Go to MENU > HUMAX TV Portal and select REG. CODE. The registration code is valid for 3 hours.
• You can create up to 4 personal accounts.
• To use social network service on your receiver, go to HUMAX server > My Page > Manage App
Account and connect your personal account to your social network account.
Featured APPS
Popular apps with agreement between HUMAX and content providers are displayed for promotion.
BBC iPlayer
You can watch live TV or radio programmes and watch them again for seven days after they are broadcast.
BBC News
You can get the latest, breaking news and see the top stories from the UK and around the world.
(Available on HDR-2000T only)
BBC Sport
You can get the latest sports news, live action and highlights. (Available on HDR-2000T only.)
YouTube
You can browse popular videos and view them on your TV.
Picasa
You can access Picasa to view photos on your TV. (Available on HDR-2000T only)
Note:
• You cannot add or delete featured apps.
• Featured APPS are subject to change without notice.
38
HUMAX TV Portal
English
MY APPS
My Apps differ depending on model type.
You can browse and download various apps from App Market.
The apps displayed in MY APPS may differ according to a personal account.
Note: You can sort, move and delete the apps.
Disclaimer: You agree that your use of the HUMAX TV Portal Service (“Service”) is at your sole risk and
acknowledge that the Service and anything contained therein, including, but not limited to, content,
services, goods or advertisements (the “Items”) are provided “AS IS” and that HUMAX makes no warranty
of any kind, express or implied, as to the Items, including, but not limited to, merchantability, no
infringement, title or fitness for a particular purpose or use. HUMAX is not responsible for the quality of
the broadband, and any disruptions or discontinuation of the Services as a result of broadband provided
by your Internet Service Provider (“ISP”).
HUMAX does not warrant that the Service is compatible with your equipment or that the Service is free
of errors or viruses and is not liable for any damage you may suffer as a result of such destructive features.
You agree that HUMAX, its Suppliers and its third-party agents shall have no responsibility or liability
for any injury or damages, whether caused by the negligence of HUMAX, its employees, subcontractors,
agents, Suppliers or otherwise arising in connection with the Service and shall not be liable for any lost
profits, losses, punitive, incidental or consequential damages or any claim against HUMAX by any other
party or any fault, inaccuracy, omission, delay or any other failure in the Service caused by your equipment
or arising from your use of the Service on such equipment. For any issues or questions about the
compatibility with your broadband, please contact your ISP.
39
Preferences
In this chapter you can set options for parental control, language, time, video, audio and screen display.
Note: Press the MENU or EXIT button to exit. Press the BACK button to return to the previous screen.
Parental Control
MENU  Settings  Preferences  Parental Control
You will be prompted to enter the password to access this menu.
Note: The default password is 0000. If you have forgotten your password, call HUMAX Customer Support
on 0344 318 8800 or e-mail uksupport@humaxdigital.co.uk
Guidance Policy
You can set the guidance on the recordings or
internet contents during the watershed which is
the time period (21:00 to 05:30) for adult contents.
1. Select Guidance Policy.
2. Select an option.
All Content
All Guidance Marked Content
Internet Content Only
Off
3. Press the OK button.
Note: The password is required to view the
blocked programmes.
Changing Password
You can change the current password. This
password is prompted every time a password
blocked menu is accessed.
1. Select Change STB Password.
2. Enter the new password.
3. Enter the new password for verification.
Menu On/Off
40
Select
YELLOW
YELLOW
BLUE
YELLOW
GREEN
BLUE
RED
GREEN YELLOW
Confirm
BLUE
GREEN
RED
BLUE
RED
GREEN
RED
Enter 0~9
Preferences
English
Language Setting
MENU  Settings  Preferences  Language
You can set the preferred language for audio and
subtitle.
1. Select Preferred Language.
2. Select the language.
Note:
• You can change the subtitle language by
pressing the SUB button while watching a
programme.
• The Preferred Language will be the priority
when you change channels or restart the
product.
Setting Power On/Off Timer
MENU  Settings  Preferences  Time
1. To turn on the product automatically, select
Power On Timer and select Set Timer.
2. Enter the time.
3. Set the options for the power on timer.
Channel: Select the channel to be displayed
when powering on.
Volume: Adjust the volume of the audio when
powering on.
Repeat: Select the repeat mode of the power on
timer.
4. To turn off the product automatically, select
Power Off Timer and select Set Timer.
5. Enter the time.
Note: The power on time and power off time should be set different from each other.
Menu On/Off
Select
YELLOW
YELLOW
BLUE
YELLOW
GREEN
BLUE
RED
GREEN YELLOW
Confirm
BLUE
GREEN
RED
BLUE
RED
GREEN
RED
Enter 0~9
41
Preferences
Video Setting
MENU  Settings  Preferences  Video
Setting TV Screen Ratio
You can select the screen ratio of your TV.
1. Select Screen Ratio.
2. Select an option.
16:9 - 4:3
Setting Display Format
You can select the display format according to the
screen ratio of your TV.
1. Select Display Format.
2. Select an option.
Screen ratio 4:3: Auto - Letterbox 16:9 -
Letterbox 14:9 - Centre
Screen ratio 16:9: Auto - Pillarbox - Zoom
Screen ratio
Display Format
4:3
Auto
Letterbox16:9
Letterbox14:9
Auto
Pillarbox
Zoom
Centre
16:9
Setting Resolution
You can select the resolution of the screen.
1. Select Resolution.
2. Select an option.
576i - 576p - 720p - 1080i - 1080p
3. Select OK to change the resolution.
Note: When connected with a SCART cable you can set the resolution to 576i only.
Setting TV SCART
You can select the video signal output option for the TV SCART.
1. Select TV SCART.
2. Select an option.
CVBS – RGB
Menu On/Off
42
Select
YELLOW
YELLOW
BLUE
YELLOW
GREEN
BLUE
RED
GREEN YELLOW
Confirm
BLUE
GREEN
RED
BLUE
RED
GREEN
RED
Enter 0~9
Preferences
English
Audio Setting
MENU  Settings  Preferences  Audio
Setting Audio Description
You can set to narrate the on-screen visuals which
is used for visually impaired viewers. 1. Select Audio Description.
2. Select an option. On - Off
Note: Not all channels/programmes will provide
Audio Description; for further information
please contact the Broadcaster.
Setting Digital Audio Output
You can select the digital audio signal output of your product.
1. Select Digital Audio Output.
2. Select an option.
Multi - channel - Stereo
Setting Lip-Sync
You can adjust the sound difference of audio and video.
1. Select Lip-Sync.
2. Adjust the lip-sync using the t/u button. Pressing the right button increases the audio speed and
pressing the left button decreases it.
Menu On/Off
Select
YELLOW
YELLOW
BLUE
YELLOW
GREEN
BLUE
RED
GREEN YELLOW
Confirm
BLUE
GREEN
RED
BLUE
RED
GREEN
RED
Enter 0~9
43
Preferences
Screen Display
MENU  Settings  Preferences  Screen Display
Setting Info Display Time
You can set the duration the information box is
displayed every time the channel is switched.
1. Select Info Display Time.
2. Select an option.
Off - 1~20 sec
Setting Transparency
You can set the transparency of the On-Screen
Display.
1. Select Transparency.
2. Select an option.
Off - 25% - 50% - 75%
Setting Subtitle Display
You can set to display the subtitle automatically or not.
1. Select Subtitle Display.
2. Select an option.
On - Off
Setting Subtitle Font
You can adjust the subtitle font.
1. Select Subtitle Font.
2. Select an option.
Variable - Fixed
Menu On/Off
44
Select
YELLOW
YELLOW
BLUE
YELLOW
GREEN
BLUE
RED
GREEN YELLOW
Confirm
BLUE
GREEN
RED
BLUE
RED
GREEN
RED
Enter 0~9
Installation
English
Installation menu allows you to search the available TV and radio channels. Software update, antenna
power and factory default setting are also available in this section.
MENU  Settings  Installation
Note:
• You will be prompted to enter the password to access this menu. The default password is 0000. If you
have forgotten your password, call HUMAX Customer Support on 0344 318 8800 or e-mail
uksupport@humaxdigital.co.uk.
• Press the BACK button to save the changes and return to the previous screen. Press the MENU or EXIT
button to exit.
Automatic Search
You can search channels automatically without entering any other information.
1. Select Automatic Search. Channel search
starts.
2. Select Save and press the OK button to save
the results.
Note: Select Stop and press the OK button to
stop the channel search.
45
Installation
Manual Search
You can search channels manually by searching parameters.
1. Select Manual Search.
2. Configure the search options.





Channel: Select the channel.
Frequency: Enter the frequency.
Transmission: Select DVB-T or DVB-T2.
Bandwidth: Select the bandwidth.
Network Search: Select On or Off.
3. Select Search and press the OK button.
4. Select Save and press the OK button to save
the results.
Note:
• Select Stop and press the OK button to stop the channel search.
• For information on the correct channel numbers to use in your area please visit http://www.digitaluk.
co.uk. Please select the “I am in the aerial installation trade” option when searching your postcode.
Software Update (OTA)
In order to maintain proper performance of the product, it is essential to have the most up-to-date
software. Visit the HUMAX website to check the latest news and newly released software versions. (http://
www.humaxdigital.com) It is recommended that you periodically check for the availability of
software update.
OTA, an abbreviation of Over–the-Air, means that the software can be downloaded through your aerial.
The manufacturer reserves the right to decide when and where to release software by this process.
You can also search and download new software manually.
MENU  Settings  Installation  Software Update
Automatic Update
1. Select Automatic Update and press the OK
button to search for new software
2. When new software is detected, select Yes to
start the update process now.
46
Installation
English
Manual Update
1. Select Manual Update and press the OK
button.
2. Enter the options manually
 Channel: Select the channel.
 Frequency : Enter the frequency. The
corresponding frequency value will be
automatically displayed.
 Transmission: Select DVB-T or DVB-T2.
3. Select Search and press the OK button to
search for new software.
4. When new software is detected, select Yes to
start the update process now.
Please wait until the update is complete. When
completing the software update, the product
is automatically powered off and on again.
Note:
• It may take 5~10 minutes to update software.
• Other functions such as scheduling programmes will not activate while software update takes place.
• The software updates will only be downloaded over air if you are receiving the HD channels available.
If you do not receive the HD channels at the current time please visit http://www.humaxdigital.co.uk/
update to upgrade via USB.
• Be sure to update software when the signal strength and quality is high. If the weather is not favorable
and the signal strength and quality are not recommendable, perform the software update later.
• The product will search new software automatically during standby. If new software is detected, you
can choose either to download immediately or later when you switch into operation mode. If you
select Later, the message will be displayed again when you power on.
Caution:
• Please be careful to keep the power on and the power cord plugged in during software update. If the
power is off during software update, fatal damage may be caused to the product.
• Please be careful not to pull out the signal line (RF cable) during software update. Update may be
interrupted and the product may not operate.
47
Installation
Antenna Power
MENU  Settings  Installation  Antenna Power
Active antenna is a portable or indoor antenna which needs power supply from the product because it
does not have power cord for itself. Connect an active antenna to the ANTENNA IN on the rear of the
product.
1. Select 5V Antenna Power.
2. Select an option.
 On: 5V power is supplied from the active antenna cable.
 Off: No power supplied
Note: Most domestic aerial installation will not
require the Antenna Power option to be
switched on. Please check with your aerial
installer if this is required for your aerial.
Factory Default
MENU  Settings  Installation  Factory Default
1. Select Factory Default.
2. A popup will appear. Select Yes.
3. You will be prompted to enter the password.
Enter the password.
Note:
• The default password is 0000. If you have
forgotten your password, please contact
Humax Customer Support.
• To format the HDD, mark Format HDD.
Warning:
• Please note that once you perform Factory
Default, all user configuration/settings will be reset to the Factory settings. After completing the
factory default, the installation wizard will appear automatically in a few seconds.
48
System
English
In System, system information, signal detection, power management, data storage and internet setting
are available.
Note: Press the MENU or EXIT button to exit. Press the BACK button to return to the previous screen.
System Information
MENU  Settings  System  System Information
The system information is displayed.
Signal Detection
MENU  Settings  System  Signal Detection
You can check the signal strength and quality of
the searched channels.
Note: We recommend that the Signal Strength
is above 30% and the Signal Quality is
above 70% in order to receive the channels
without picture/sound breakup.
Menu On/Off
Select
YELLOW
YELLOW
BLUE
YELLOW
GREEN
BLUE
RED
GREEN YELLOW
Confirm
BLUE
GREEN
RED
BLUE
RED
GREEN
RED
Enter 0~9
49
System
Power Management
MENU  Settings  System  Power Management
Setting Power Saving in Standby
You can minimise the standby power consumption
to below 0.5W.
1. Select Power Saving in Standby.
2. Select On to deactivate the certain features
and minimise the power consumption.
Setting Automatic Power Down
The receiver automatically enters standby mode
for power saving if no user interaction occurs for
3 hours.
1. Select Automatic Power Down.
2. Select On to enter standby mode automatically if no user interaction occurs for 3 hours.
Note: When Power Saving in Standby is switched On the Time on the front display will not appear when
in standby, nor will the Antenna Out loop-through the signal to a connected device.
Menu On/Off
50
Select
YELLOW
YELLOW
BLUE
YELLOW
GREEN
BLUE
RED
GREEN YELLOW
Confirm
BLUE
GREEN
RED
BLUE
RED
GREEN
RED
Enter 0~9
System
English
Data Storage
MENU  Settings  System  Data Storage
You can check the size of the internal HDD or
external USB storage device.
1. Select storage to display the details for the
storage.
2. Select HDD Test to test your hard disk drive for
errors.
3. To format the selected storage, select
Format Storage. If you select Yes, you will be
prompted to enter the password.
Note: The default password is 0000. If you have
forgotten your password, please contact
Humax Customer Support.
Menu On/Off
Select
YELLOW
YELLOW
BLUE
YELLOW
GREEN
BLUE
RED
GREEN YELLOW
Confirm
BLUE
GREEN
RED
BLUE
RED
GREEN
RED
Enter 0~9
51
System
Internet Setting
MENU  Settings  System  Internet Setting
Configuring Wi-Fi
The HDR models can be connected wirelessly to your home network with our optional Wi-Fi USB Adapter,
all models can be connected directly with the
supplied Ethernet Cables.
Make sure that a USB Wi-Fi dongle is connected
first.
1. Select Configure Wi-Fi.
2. The Wi-Fi network list will appear. Select your
Wi-Fi network and press the OK button.
3. If your Wi-Fi network is not listed, select Input
network name and enter the name in the
keyboard.
4. Configure the Wi-Fi setting options.
Network Name: The Wi-Fi network name
Security Type: The Wi-Fi security type
Password: The Wi-Fi password
Configuring LAN
1. You can configure the Ethernet setting options.
DHCP: Apply the options according to the DHCP.
Manual: Enter the options manually, Select
Apply and press the OK button.
Note:
• When entering the IP address manually, enter
3 digits in a row.
• The network is connected by LAN when both
WiFi and LAN are activated.
• HUMAX recommends the network connection
over a direct LAN.
Content Share
You can find video, music and photo files in the HDD and play them on your TV or send those files to other
devices. (Make sure the network is connected to both devices.)
1. Select Content Share.
2. Select On to connect to the HD from other devices.
FTP Server
You can transfer the media files in the internal HDD into your PC with FTP programme.
1. Select FTP Server.
2. Select On to make the receiver work as FTP server.
Note: To access to the internal HDD, enter the IP address assigned to the receiver on PC.
Menu On/Off
52
Select
YELLOW
YELLOW
BLUE
YELLOW
GREEN
BLUE
RED
GREEN YELLOW
Confirm
BLUE
GREEN
RED
BLUE
RED
GREEN
RED
Enter 0~9
Appendix
English
Service and Support
Information concerning troubleshooting, software upgrade and product support is provided in the
following websites and call centers. Should your product require warranty service, please contact HUMAX
to obtain the appropriate authorization.
Customer Support
UK
Tel:
Opening Hours:
E-mail:
Website:
Language:
0344 318 8800
Mon - Fri 09:00 – 17:30 (excluding Bank Holidays)
uksupport@humax-digital.co.uk
www.humax-digital.co.uk
English
53
Appendix
Safety Warning
This product has been manufactured to comply with international safety standards. Please read the
following safety precautions carefully.
Safety Instructions and Precautions
1. MAINS SUPPLY
• Operate this product only from the type of power supply indicated on the marking label. If you are not sure of
the type of power supplied to your home, consult your local power company.
• Disconnect the product from the mains before you start any maintenance or installation procedures.
2.OVERLOADING
• Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.
3.LIQUID
• The product should not be exposed to liquid of any kind. In addition, no objects filled with liquid should be
placed on the apparatus.
4.CLEANING
• Disconnect the product from the wall outlet before cleaning.
• Use a light damp cloth (no solvents) to dust the product.
5.VENTILATION
• The slots on top of the product must be left uncovered to allow proper airflow into the unit.
• Do not stand the product on soft furnishings or carpets.
• Do not stack electronic equipments on top of the product.
6.ATTACHMENTS
• Do not use any unsupported attachments as these may be hazardous or cause damage to the product.
7. LIGHTNING, STORM OR NOT IN USE
• Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left
unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and
power-surges.
8. EXTRANEOUS OBJECTS
• Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or
damage parts.
9. REPLACEMENT OF PARTS
• When replacement of parts is required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitution may
result in additional damage to the unit.
10. CONNECTION
54
[Satellite] CONNECTION TO THE SATELLITE DISH LNB
• Disconnect the product from the mains before connecting or disconnecting the cable from the satellite dish.
Failure to do so can damage the LNB.
[Cable] CONNECTION TO THE CABLE TV SIGNAL
• Connect all components before plugging any power cords into the wall outlet. Always turn off the product, TV
and other components before you connect or disconnect any cables.
[Terrestrial] CONNECTION TO THE AERIAL
• Disconnect the product from the mains before connecting or disconnecting the cable from the aerial. Failure to
do so can damage the aerial.
Appendix
English
11.CONNECTION TO THE TV
• Disconnect the product from the mains before connecting or disconnecting the cable from the TV. Failure to do
so can damage the TV.
12. LOCATION
• Place the product indoors to avoid exposing it to lightning, rain or sun. Do not place it near a radiator or heat
register.
• We recommend that the product has 10 cm clearance from any other appliances susceptible to electromagnetic
influences, such as a TV or a VCR.
• Do not block the openings with any object, and do not place the product on a bed, sofa, rug, or other similar
surface.
• If you place the product on a rack or a bookcase, ensure that there is adequate ventilation and that you have
followed the manufacturer’s instructions for mounting.
• Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall. A falling product
can cause serious injury to a child or adult, and serious damage to the appliance.
Warning
1. To avoid damage of the power cord or plug;
•
•
•
•
•
Do not modify or process the power cord or plug arbitrarily.
Do not bend or twist the power cord.
Make sure to disconnect the power cord holding the plug.
Keep heating appliances as far as possible from the power cord in order to prevent the cover vinyl from melting.
The mains plug, as a disconnection device, shall remain readily accessible by the user.
2. To avoid electrical shock;
•
•
•
•
•
Do not open the main body.
Do not insert metal or inflammable objects inside the product.
Do not touch the power plug with wet hands.
Disconnect the power cord in case of lightning.
Unplug the power cable before you install the antenna cable.
3. To avoid damage of product;
• Do not use the product when it is out of order. If you continue to use the product when defective, serious
damage can be caused. Make sure to contact your local product distributor if the product is out of order.
• Do not insert metal or alien substance into the slots for the modules or Smartcards. (where applicable) It may
cause damage to the product and reduce its life span.
4. To avoid damage of the hard disk drive (PVR only)
• Do not move the product or turn the power off suddenly while the hard disk drive is running.
• The company shall not be liable for any corruption of data on the hard disk drive caused by carelessness or
misuse.
55
Appendix
Trouble Shooting
Before contacting your local service centre, please read the tips below carefully. If the problem persists
after completing the following procedure, please contact your local product distributor or service centre
for further instructions.
1. No message displayed / no lights appear on the front display. (The product will not switch on.)
•
•
•
•
Check the main power cable and make sure it is plugged into a suitable power outlet.
Check that the mains supply is switched on.
Connect the power cable to a different power outlet.
Check that the power switch is on at the rear of the product. (where applicable)
2. No picture
•
•
•
•
•
•
•
•
•
Make sure that the product is powered on and in operation mode. (Press the STANDBY button)
Make sure that the AV cable is firmly connected to the TV.
Make sure that the antenna cable is properly connected to the product.
Make sure that you have selected the correct AV Channel / Input on your TV set (refer to your TV user manual for
more information)
Be sure to activate channel search.
Check the brightness level of the TV.
Check if the channel is currently on air. Contact the broadcaster to ensure that the channel is running.
Press the SOURCE button if the product is in external input mode. (where applicable)
Satellite: Make sure that the antenna setting in the menu is correct.
3. Poor picture/sound quality
•
•
•
•
Install the antenna in an obstacle-free place.
Make sure there is no mobile phone or microwave oven near the product.
Keep the power and the antenna cables apart from each other.
Check the signal levels and adjust your antenna if the level is too low. The signal level may be affected by
weather conditions.
Note: If the antenna is covered with snow or the RF is weakened by heavy rain, the condition of the sound
and picture may temporarily be poor. However, the poor sound and picture quality due to weather
conditions cannot be accepted as a malfunction of product.
•
•
•
•
•
•
[Satellite] Check that your dish alignment is correct.
[Satellite] Change the satellite dish for a larger one as this will increase the signal levels received.
[Satellite] Replace the LNB with a lower noise factor in cases where the noise factor is too high.
[Satellite] Replace the LNB with a new one in case it is damaged or out of order.
[Terrestrial] Adjust the antenna direction to get a better picture.
[Terrestrial] Set the antenna power in menu to On, if you use the active antenna to improve the reception.
(where applicable)
4. No or poor sound
•
•
•
•
Check that your AV cable is connected correctly.
Check the volume levels of your TV set and the product.
Check if the product or TV is on mute.
Check audio type or soundtrack option in the AV menu. (where applicable)
5. Remote control does not operate.
• To control the product, the top end of the remote control should point directly towards the receiving part of the
product.
• Remove and reinsert the batteries in the remote control.
• Replace the batteries in the remote control for a new set.
• Set the remote control to STB or PVR mode, if you are using the universal remote control. (where applicable)
56
Appendix
English
6. Cannot make reservations.
• Check that no previous reservations are conflicting with the new reservation.
7. No password information is given.
• The default password is always 0000.
8. Channel search does not work.
• Satellite: Make sure that the antenna setting in the menu is correct.
• Terrestrial: Make sure that the antenna is connected correctly.
• Terrestrial: Use the appropriate antenna capable of receiving VHF or UHF channels for your area.
9. Cannot update new software.
• You can get an update. If the product does not show a message requesting update, this means no software is
available.
10.The product makes a humming noise. (PVR only)
• The noise is from the fan; the hard disk is operating normally. This kind of noise is inevitable but seldom
noticeable.
11.Cannot record progammes. (PVR only)
• The hard disk is full. Delete unnecessary programmes and make space for new recording. • Check if recording is overlapped with another channel. Stop the current recording or wait until the recording is
finished.
• Check that the product is switched on when recording starts.
12.Cannot operate TSR (Time Shifted Recording). (PVR only)
• TSR may not be available during recording. Wait until recording is finished.
• Delete unnecessary programmes and make space for new recording.
13.Cannot playback. (PVR only)
• To playback the recorded file of a scrambled channel, use the Smartcard. In case it has been a long time since
you last recorded, this may not work. Contact the product distributor.
• The signal during recording may be weak or the hard disk too full.
14.Cannot change channels while recording. (PVR only)
• Certain channels may not be changed due to restriction of the tuner or connection type.
57
Appendix
Error Message
Error message
No or bad signal
[Satellite]
No or bad signal
[Cable]
No or bad signal
[Terrestrial]
The channel is
scrambled or not
available.
The audio is not
available.
Possible causes
The satellite dish is not pointing at the
satellite.
Adjust dish alignment.
Signal is too weak.
Increase the LNB voltage or connect a
signal amplifier.
Satellite dish is too small.
Change to a larger dish.
Problem with LNB.
Change the LNB.
Wrong antenna setting.
Set the antenna correctly.
The cable is not connected.
Make sure the cable is connected
correctly.
The cable may be damaged or
defective.
Exchange the cable.
The channel is not broadcasting.
Exchange the cable.
The aerial is not pointing properly.
Adjust aerial. Check the cable from
the aerial. If you cannot resolve the
problem, you may need to have your
aerial and installation tested by a
professional.
The channel has a signal, but no audio
or video.
Confirm if the channel is currently on
air.
The channel has been deleted by the
broadcasting company.
Check if the channel is currently on air
The channel is for data broadcasting.
Remove the channel from the channel
list and check for new transponder
details.
The channel has a video signal, but no
audio.
Press the audio button to confirm that
the channel has audio options.
No access
Make sure you are subscribed to the
channel.
No authorization.
If the product has been turned off for
a long time (standby or power off ),
please wait for authorization. It may
take up to 60 minutes.
No access
58
What to do
Appendix
English
Remote Control Code List (HDR-2000T models only)
1. Using the Universal Remote Control
1. Select the TV button on the remote control. The button will blink once.
2. Keep pressing the button for 3 seconds until the button lights on.
3. Enter the 3-digit code. Every time a number is entered, the button will blink.
When the third digit is entered, the button will blink twice.
4. If a valid 3-digit code is entered, the product will power off.
5. Press the OK button and the mode button will blink three times. The setup is complete.
6. If the product does not power off, repeat the instruction from 3 to 5.
Note:
• When no code is entered for one minute the universal setting mode will switch to normal mode.
• Try several setting codes and select the code that has the most functions.
Remote Control Function List
The keys on the remote control function as in the list below.
Note: Some keys may not function depending on the product.
Button
TV
PVR
Button
BACK
TV
TV
LAST
+
VOLUME UP
-
VOLUME DOWN
STANDBY
POWER
MUTE
MUTE
i
TEXT
TEXT
OPT+
INFO
LIST
P^
PAGE UP
TV Portal
Pv
PAGE DOWN
REC
PIP MOVE
RED
RED
MENU
MENU
GREEN
GREEN
tt
PIP OFF
YELLOW
YELLOW
u/II
TEXT EXPAND
BLUE
BLUE
uu
PIP
1
1
TEXT MIX
2
2

PIP INPUT
3
3
TEXT GREEN
OFF
4RED
4
GREEN
5RED
5
YELLOW
BLUE
YELLOW
MEDIA BLUE
GUIDE
GUIDE
6
6
OK
OK
7
7
UP
UP
8
8
LEFT
LEFT
9
9
RIGHT
RIGHT
0
0
DOWN
DOWN
SUB
SUBTITLE
Exit
EXIT
AD
59
YELLOW
BLUE
GREEN
RED
Appendix
2. TV Code List
Brand
Code
Graetz
144, 087, 061, 023, 053, 065, 211
Acer
261, 278, 305
Grundig
Acoustic Solutions
210, 312, 324, 370, 386, 428, 477
102, 006, 030, 087, 142, 005, 108, 498, 476,
448, 447, 445, 430, 405, 370, 271, 267, 250,
225, 135, 121, 010, 101, 096, 028, 077
Akai
102, 006, 098, 144, 145, 111, 061, 043, 074,
148, 232, 280, 128, 122, 461, 109, 462, 489,
094, 084, 083, 065, 035, 034, 033, 028, 023,
011, 004, 002, 154, 321
Grunkel
211
Hannspree
262, 263, 264, 342, 401, 402, 463
Hantarex
006, 002, 094, 190, 260, 289
Hinari
006, 043, 036, 005, 002, 033, 059, 077, 443
Hisense
102, 092, 165, 254, 265, 366, 491
Hitachi
006, 098, 124, 204, 208, 005, 019, 037, 146,
152, 153, 163, 169, 193, 197, 007, 206, 210,
217, 227, 295, 296, 330, 377, 399, 424, 483,
020, 021, 023, 027, 035, 054, 056, 060, 076,
081, 083, 084, 085, 089, 091, 094, 018, 106,
107, 011
Humax
505, 299, 506, 507, 245, 319, 322, 411, 433,
479
Hyundai
164, 190, 192, 241, 244, 271, 291, 317, 338,
340, 341, 439
Inno Hit
036, 002, 011, 035, 045, 047, 094, 211
Irradio
006, 036, 002, 047, 065, 147
JVC
111, 036, 005, 129, 130, 015, 029
065, 072, 137, 149, 207, 264, 362
408, 496
Keymat
258, 300, 398, 436, 437
Lenoir
002, 214
LG
102, 006, 144, 145, 138, 061, 064, 248, 281,
354, 367, 368, 384, 396, 416, 417, 425, 426,
215, 209, 067, 047, 035, 034, 027, 023, 002,
001, 236, 257
Alba
006, 144, 134, 204, 087, 064, 036, 005, 108,
473, 455, 447, 388, 099, 084, 077, 072, 065,
059, 034, 023, 002
Bang & Olufsen
014
Beko
006, 144, 086, 145, 111, 064, 072, 172, 361,
405
BenQ
223, 328, 329
Black Diamond
444, 204, 211
Brionvega
006, 014, 062
Bush
102, 006, 144, 134, 204, 138, 087, 061, 043,
036, 005, 108, 376, 373, 370, 361, 355, 352,
327, 388, 430, 431, 432, 440, 448, 451, 473,
476, 477, 478, 002, 033, 035, 044, 045, 056,
059, 065, 066, 095, 133, 164, 210, 213, 229,
232, 250
cello
397, 410, 418, 419, 420
Crown
006, 144, 134, 204, 086, 145, 087, 111, 143,
064, 361, 135, 072, 071, 053, 033, 002
Daewoo
102, 006, 124, 444, 036, 441, 406, 341, 338,
271, 249, 195, 192, 190, 164, 133, 119, 091,
079, 066, 035, 034, 002
Dell
235, 278
DMTech
260, 438, 449, 454, 456
Ferguson
006, 120, 098, 103, 030, 204, 012, 020, 029,
046, 052, 054, 077, 292, 447, 476
Loewe
006, 064, 014, 048, 093, 094, 123
131, 167, 414, 434
Finlux
102, 006, 144, 145, 333, 327, 172, 122, 118,
094, 089, 084, 083, 070, 055, 035, 023, 018,
017, 014, 011, 010
Logik
204, 001, 003, 029, 162, 195, 224, 292, 376,
464, 465, 466
Fujitsu
002, 011, 032, 035, 042, 137, 173, 187
Logix
134, 095
Fujitsu General
002, 032, 035, 137
Luxor
098, 204, 061, 023, 033, 035, 047, 055, 056,
060, 083, 084, 122, 211
Fujitsu Siemens
172, 211, 230, 246, 268, 369
Manhattan
006, 134, 204, 164, 192, 237, 293
Funai
144, 134, 043, 275, 336, 369, 407
Marantz
102, 006, 071, 140, 277, 317
GoldStar
006, 144, 145, 111, 061, 001, 007, 020, 023,
027, 034, 035, 047, 067
Marks and Spencer
420
Matsui
102, 006, 144, 030, 204, 087, 005, 080, 074,
153, 195, 097, 094, 369, 445, 077, 447, 065,
059, 056, 052, 044, 035, 033, 028, 011, 008,
004, 003, 002
Mitsubishi
102, 006, 204, 005, 019, 014, 015, 027, 093,
096, 191, 311
Mivar
034, 035, 047, 048, 094, 112
Gooding
087
Goodmans
102, 006, 120, 144, 103, 134, 124, 444, 204,
087, 043, 036, 005, 478, 211, 232, 477, 250,
476, 271, 445, 355, 370, 373, 440, 376, 382,
383, 386, 002, 004, 011, 035, 047, 052, 054,
065, 066, 084, 091, 094, 119, 121, 133, 172,
195, 210
60
Appendix
English
NEC
005, 002, 003, 025, 035, 040, 049, 066, 140,
239, 379
Sharp
005, 130, 216, 015, 029, 088, 094, 177, 274,
334, 365, 409, 166, 288
Nokia
098, 113, 111, 061, 023, 033, 049, 053, 055,
056, 066, 083, 084, 089, 122
Siemens
006, 030, 028, 096, 101
SKY
006, 195, 271, 300, 307, 308, 340, 341, 342,
343, 344, 391, 400, 421
Sonoko
006, 043, 002, 035, 045
Sony
006, 301, 005, 446, 412, 393, 375, 360, 325,
255, 203, 185, 174, 058, 003
Strong
210, 211
Technika
422, 428, 465, 468, 480, 493
TechniSat
102, 131, 237
Technisson
144, 242, 361
Technosonic
102, 120, 091, 195, 256, 258, 436, 437, 451,
468
Telefunken
006, 120, 144, 103, 086, 320, 202, 105, 090,
082, 055, 054, 052, 046, 020, 016, 012, 348
Tevion
102, 006, 144, 134, 204, 208, 468, 405, 403,
376, 355, 327, 298, 246, 242, 232, 230, 172,
128
Thomson
006, 120, 103, 020, 046, 052, 054, 056, 082,
335
Toshiba
030, 204, 005, 115, 129, 092, 447, 364, 313,
304, 242, 212, 211, 183, 100, 039, 022, 020,
010, 009, 004, 236, 257
Tosumi
451
Vestel
006, 134, 204, 035, 211, 333, 370
Videocon
092
Viewsonic
307, 308, 323, 335, 349, 391, 394, 259, 331
Wharfedale
102, 006, 095, 189, 256, 327, 370, 452, 453,
477, 502
Nordmende
006, 144, 103, 030, 020, 046, 054, 242, 280,
499
Onida
207, 226
Orion
102, 006, 144, 204, 467, 458, 457, 456, 448,
445, 443, 385, 218, 195, 131, 097, 094, 077,
071, 059, 050, 049, 003
Orline
Ormond
006, 036
134, 204
Orsowe
094
Pacific
102, 144, 204, 208, 077, 256
Packard Bell
254, 293
Panasonic
006, 098, 061, 129, 038, 023, 063, 094, 187,
251, 294, 353, 359, 279, 306
Panavision
006, 070
Philco
006, 064, 014, 021, 072
Philips
102, 006, 061, 459, 435, 429, 395, 310, 302,
297, 247, 125, 110, 101, 073, 066, 054, 029,
014, 002
Phonola
102, 006, 014, 029, 034
Pioneer
006, 086, 061, 064, 020, 023, 024, 046, 073,
093, 136, 159, 233, 277, 286, 381
Pionier
086, 064, 327
Radiomarelli
006, 014, 094
Relisys
190, 192, 193, 194, 220, 221, 271, 310, 333,
338, 341, 355, 390
Saba
120, 098, 144, 103, 061, 014, 020, 023, 046,
052, 054, 090, 094, 335
Yamaha
169, 314, 330, 184
Sagem
113, 080, 182, 253, 337
Zanussi
032, 035
Samsung
102, 006, 043, 064, 108, 115, 231, 252, 276,
287, 332, 345, 350, 351, 372, 442, 474, 488,
490, 492, 228, 176, 175, 127, 095,047, 035,
034, 033, 027, 023, 011, 009, 002
Sanyo
204, 064, 005, 019, 442, 370, 363, 358, 357,
356, 222, 200, 150, 140, 097, 053, 048, 035,
034, 033, 025, 023, 017, 011, 008, 003, 002,
240
Schaub Lorenz
098, 144, 086, 111, 061, 056, 066, 215, 256,
267
Schneider
102, 006, 144, 134, 204, 061, 208, 036, 451,
450, 293, 128, 097, 095, 065, 056, 054, 042,
035, 023, 010
SEG
006, 134, 204, 087, 043, 036, 005, 285, 211,
210, 119, 062, 056, 035, 034, 002
Sei-Sinudyne
006, 014, 032, 094, 097
Seleco
023, 032, 042, 055, 062, 065, 070, 075, 099
61
Appendix
TV/VCR Combo
TV/VCR/DVD Combo
Aiwa
445
Grundig
448
Amstrad
026
Orion
448
Beko
086
Daewoo
444, 119
GoldStar
006
Grundig
102, 006, 030, 101, 445
Irradio
147
LG
027
Philips
102, 006
Saba
120
Samsung
442
Sanyo
442
Sharp
015
Thomson
120
United
445
If the code for your equipment is not listed, visit the following website and see MDB1.3 for a complete list of
supported codes.
(http://www.humaxdigital.com/global/support/rcucodelist.asp)
62