«A complete range of high-performance laboratory instruments»
MTX 3250 Multimeter – Analyser
MTX 3240 LF Generator – Tester
MTX 3252 - MTX 3352 - MTX 3354 Oscilloscopes – Analysers
So smart you could choose them
for their curves!
Innovative design for effective, comfortable use
A lightweight, compact casing and a friendly user interface
A display of unrivalled dimensions and readability
100%-digital calibration for high accuracy at a reasonable cost
Entirely-programmable versions that comply with the SCPI standard
New intelligent display technology
(Smart Persistence Oscilloscope)
Advantages which make it ideal for Education and Industry
Your Distributor
1694, 1694/1 Prachasongkhro Road,
Dindaeng, Dindaeng, Bangkok 10400
Tel. 02-692-3980, Fax. 02-692-3978
MTX 3250 : the built-in multimeter-analyser
A cutting-edge
of multimeter
It all begins with a connection reduced to 3 terminals which limits maneuvers and errors and
allows complete current “AUTORANGING”
between 50 µA and 20 A. Then with its 3-way
display, the MTX 3250 gives measurement
combinations that meet current applications
simply and efficiently, such as bandwidth measurement (attenuation in dB and frequency
Like the generator of the same family, the
MTX multimeter is an exceptional, multifunctional device. Thanks to its signal analysis,
there is no need for the user to use other
instruments (an oscilloscope for example)
when verifying the measurements made.
For metrology control, the “SPEC” Mode calculates and displays the instrument’s uncertainties according to the ranges and the
measured value
performance service with its associated PC
The frequent errors, often ignored, due to an
excessively high crest factor, are impossible
to make. Indeed, the MTX 3250 measures
rapid peaks at 500 µs non-stop and lets you
know when it finds a fault. Better still, when
“AUTO PEAK” Mode is validated, the multimeter automatically switches to the range
best suited to the type of signal measured.
Since the crest factor is displayed you can
also make an initial quantitative diagnosis
on signals.
Temperature is measured directly using a Pt
100 or Pt 1000 probe, as is frequency up to 1
MHz, with period and duty cycle.
gives a direct reading of the
measured quantity, as well as the corresponding physical unit.
“Surveillance” Mode
records the minima and maxima so as to capture and date
“RELATIVE” Mode, expressed in absolute, percentage or dB (ratio), allows direct
terms operation.
The MTX 3250 is a rational investment for it
is also a frequency meter, a thermometer
and even a logger, which means that it is
not necessary to purchase instruments that
you don’t use that often. Also for recording
up to 4 channels and 12 parameters in the
laboratory, the “data logger” version of this
multi-purpose instrument offers high-
And in order to meet your expectations
regarding automated systems, a 100% programmable version of this instrument exists
via an SCPI-compatible, RS232 optical link
at 57,600 bauds.
VDC ranges
and basic
VAC ranges and
basic accuracy
IDC ranges and
basic accuracy
IAC ranges and
basic accuracy
50,000 counts
LCD 50 x 140 mm
3-way display
500 mV 500 V &
1000 V
500 mV - 600 V
(50,000 counts)
100 kHz
500 µA - 500 mA & 10 A
5 µA – 500 mA & 10A
10 kHz
Other measurements: continuity test, diode test, 50 nF – 50 mF capacitance, frequency
1 Hz-1 MHz, duty cycle 0.01% to 100%, temperature – 200 to +800°C, Pt100 and Pt1000.
PEAK HOLD function: Pk+/- 500 µs on I & V, crest factor
Additional features: SURV = dated MIN/MAX/MATH =dB, dBm, ax+b/ OFFSET
(Offset, nil, delta%) / Data HOLD & Auto HOLD
Ohm ranges
and basic
500 - 50 MΩ
MTX 3250-P
MTX 3250-A
170 x 270 x 190 mm
Weight: 2.3 kg
Optical RS232
57,600 bauds
Additional features on the MTX 3250-P: PRINT, 0.5 s to 10 h rate, clock and calendar,
RS232 optical drive
Additional features on the MTX 3250-A:DATA LOGGER with 1,500 stored measurements,
1 or 3 values at a time.
Accessories and information for ordering
Standards: safety as per IEC 61010-1, 2001 and EMC as per NF 61326-1, 1998
Warranty: 3 years
The MTX 3250 multimeter is supplied with 1 mains power cable, 1 set of measurement leads, a user’s manual and an interactive presentation of
the instrument on CD-ROM.
To order
50,000-count Benchtop Multimeter
50,000-count Benchtop Multimeter + RS232
Supplied with an RS232 optical link, a programming manual and Labwindows / Labview drivers on CD-ROM
50,000-count Benchtop Multimeter + Logger
Supplied with an RS232 optical link, a programming manual and Labwindows /
Labview drivers and the SX-DMM data logger software on CD-ROM
MTX 3240: the stand-alone meter-generator
A generator
with innovative features
Its advanced technology allows each user to
benefit from its new, essential functions:
Combined functions
Another advantage of these innovations: complete functionality. The MTX 3240’s combined functions enable autonomous operation which means that, when simply testing settings, you can avoid
the systematic use of an oscilloscope or multimeter.
Frequency settings – guarantees stability to
the nearest digit, and intelligent accelerator
with automatic range change for frequency
Frequency control loop and display
AMPLITUDE VPP (peak/peak) and OFFSET
VDC check and display
Duty cycle check and display
The MTX 3240 is also a rational investment
for it is also a 100 MHz frequency meter
(300 V CAT I ), which means that it is not
necessary to purchase an instrument for
occasional use.
Automatic range changing optimised for
And in order to meet the user’s requirements
in terms of automated systems in an economical way, a 100% programmable version of
this generator is available, using a rapid,
SCPI-compatible link.
Variable duty cycle with fixed frequency
•“LOGIC “ function
for a fast and simple solution to generating logic signals with directly adjustable
A rugged generator with protected
60 VDC / 40 VDC outputs
MTX 3240
avec fréquencemètre
frequency meter
MTX 3240-P
LCD 50x 140 mm
Main display
20 mm
4 variables at a
0.1 Hz to 5.1 MHz
7 ranges + finetuning to the
nearest digit +
Accuracy: 0.05%
Sine, square,
pulse, ramp,
< 0.5%
1/ Main: up to
20 VPP open circuit,
automatic range
2/ TTL
Protection: overload
60 VDC / 40 VAC
1 / 50 min 10 ms
to 10 s internal
or external
0.1 Hz to 100 MHz
Accuracy: 0.05%
Input CAT I 300 V
Automatic sensitivity
115 V – 230 V 170X270X 190 mm Optical
– 240 V
Weight/ 2.8 kg
50 / 60 Hz
CAT II 300 V
Accessories and information for ordering
Standards: safety as per IEC 61010-1, 2001 and EMC as per NF 61326-1, 1998
Warranty: 3 years
The MTX 3240 generator is supplied with a mains power cable, a user’s manual and a interactive presentation of the instrument on CD-ROM
To order
Functions Generator 5.1 MHz
Functions Generator 5.1 MHz + RS232
Supplied with an RS232 optical link, a programming manual and Labwindows / Labview drivers on CD-ROM
MTX3252, MTX3352 and MTX3354:
2 or 4-channel oscilloscopes – analysers, 60 to 150 MHz!
Man-Machine Interface,
simplicity serving
Communication experts
The instrument can be controlled using
the mouse or the keyboard
Simplified, user-friendly adjustments
using the 21 direct-access keys on the
front panel and the "Windows-like" environment
Detailed online help in 5 languages available at all times with the
Equipped with an RS232 link, a Centronics
interface and a USB connection for communicating with a PC or printer
Remote management due to the Ethernet
link and the HTML server included in each
These instruments are lightweight and
compact and are equipped with a handle.
A special “Site Kit” is available allowing
the oscilloscope to be implemented
without removing it from its carrying bag
Cursors can be positioned on the signals
at any time for precise measurements.
Thanks to its 50,000-point memory depth,
the "Winzoom" horizontal trace zoom can
enlarge up to x100 by displaying the
actual points acquired.
An exceptional vertical dynamic range
from 2.5 mV to 100 V per div.
The "full trace" function allows you to split
the screen in two in order to make it easier
to read the curves.
Up to 4 curves displayed on the screen
and possibility of making comparisons
between two curves.
To simplify and save considerable time,
users can select and display 2 automatic
measurements among 19.
Complex analysis functions are accessible in "advanced" mode; in "standard"
mode, these are masked to keep the
display simple.
MTX3252, MTX3352 and MTX3354:
2 or 4-channel oscilloscopes – analysers, 60 to 150 MHz!
A vast memory
for recording
The 50,000-point memory depth is a reference in this category of oscilloscopes
Recording duration and sampling frequency 20 times higher than a traditional
The oscilloscopes in the MTX COMPACT
range possess an exceptional resolution
of 100 GS/s in repetitive mode and 200
MS/s in one-shot mode, allowing time
base calibres ranging from 200 s/div to
Integrated instruments
for a "global tool"
All the oscilloscopes are equipped with
a function for real-time, multi-channel
FFT analysis of the signal
For Electrical Engineering users, we also
propose 31-order multi-channel harmonic analysis as an option
Lastly, for people who need to monitor
the variations of physical or mechanical
phenomena over time, a fast digital
recorder can be integrated into the
instrument as a software module
Recording and on-screen retrieval of curves
Possibility of saving files in the instrument
and printing them or exporting them onto
a PC for subsequent processing in
spreadsheets, printing, images, etc.)
The traces and files recorded are
The files are generated in standard formats: .gif, .pcl, .txt, .bmp, .eps, .prn, etc.
Performance within everyone's reach
The oscilloscopes in the MTX COMPACT
range possess a 5.7" colour LCD with
backlighting for excellent reading accuracy
There is a wide choice as MTX COMPACT offers three 2 and 4-channel instruments with bandwidths of 60MHz,
100MHz or 150MHz which are ideal for
both Education and Industry
There are 5 different trigger modes:
Pulse, trigger on pulse width, Delay, trigger on pulse edges with delay, TV, trigger
on TV signal, Count, trigger on edges
with counting of events, and Mains, trigger on rising or falling edge of the
50/60Hz mains voltage
As well as these multiple parameterization modes, Hold-off is available on the
majority of these trigger functions
, an “analogue-type” display
technology capable of showing the changes in the signal
(modulations, jitters, etc.) and
the one-off phenomena (transients, glitches, etc.)
, Smart Persistence Oscilloscope:
An essential tool for smart display!
The new generation of MTX COMPACT oscilloscopes is equipped with an "
" mode which can be used, like an analogue model, to show
the changes in the signal over time, such as jitters, modulations and unstable phenomena.
This display mode can also be used to reveal one-off phenomena such as transients and glitches.
SPO technology
The "
" technology allows the acquisitions to persist for a preset duration so that
cumulated traces can be observed. The brightness or colour assigned to the point on the
screen will fade if it is not renewed during a subsequent acquisition.
Acquisition therefore takes place in three dimensions:
- time
- amplitude
- occurrence
Thanks to its 50,000-point memory depth, the oscilloscope acquires and processes
the information in parallel
The number of acquisitions per second can be multiplied by more than 1,000, thus
considerably reducing the time between successive acquisitions
On-screen representation of the 50,000 points acquired by means of a smart compression system
The "occurrence" dimension provides a statistical view of the distribution of the samples. The colour or brightness shows the irregularities of the signal
Display durations for the points acquired: 100ms, 200ms, 500ms, 1s, 2s, 5s, 10s and
Video signal
AM or FM modulation
Noise characterization
One-off or transient
N acquisitions = one display
processing Parallel
MTX3252, MTX3352 & MTX3354 :
60, 100 and 150MHz Oscilloscopes – Analysers
MTX 3354
MTX 3352
MTX 3252
Man-Machine Interface
5.7" colour LCD (115 x 86 mm)
320 x 240 + CCFL backlighting
5.7" monochrome or colour LCD (115 x 86 mm) –
320 x 240 + CCFL backlighting
Number of curves on screen
4 curves + 4 references
21 direct shortcut keys + 1 encoder + 1 "help" key
"Windows-like" menu – all commands accessible using the mouse
Choice of language via the menu (FRA/ENG/SP/IT/GER)
Vertical Deflection
Number of channels
150 M
(15 MHz, 1.5 MHz and
5KHz bandwidth limiter)
100 MHz
(15 MHz bandwidth limiter)
60 MHz
(15 MHz bandwidth limiter)
4 channels – class 1 – CAT II 300V
2 channels – class A – CAT II 300V
2.5 mV to 100 V/div +
vertical expansion up to x10
(max. sensitivity 250 µV/div)
2.5 mV to 100 V/div + "Winzoom"
vertical expansion up to x10
Rise time
< 3 ns
< 3.5 ns
Horizontal Deflection
Sweep rate
1 ns to 200 s/div – Graphic "Winzoom" function up to x100
AAuto, Normal, One-shot, Auto 50%
Edge, Pulse Width, Delay, Event Counting, TV Line Counter, Hold-off
CH1, CH2, CH3, CH4, Mains
CH1, CH2, EXT and Mains
Digital Memory
Max. sampling rate
Repetitive = 100 GS/s
One-shot = 200 MS/s
9-bit converter
Memory depth
50,000 points – 4 references + 16 curves of 50 kpts
Display modes
Glitch, Envelope, Averaging, Digital XY
SPO (Smart Persistence Oscilloscope)
100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s 100 s and Infinite
Monochrome or colour
Acquisition rate
50 kwaveform/s max. per channel – 19 MS processed per s and per channel
Recorder mode
Acquisition rate
Sampling interval from 40 µs to 54 µs (2 s to 31 days' recording)
Direct time/date-stamping, conversion and units of physical quantities,
measurements using cursors and event search function, files usable in standard spreadsheet software
Harmonic analyseur mode
Analysis range
31 orders simultaneously on 1 to 4 channels
Permanent display: RMS value of THD – Selected order: %F, phase, freq, Vrms
RS232, Centronics, USB, Ethernet with HTML server
General specifications
210 x 177 x 200 – 2.5 Kg – IP30
Power supply
100 to 240 VAC – 47 to 63 Hz
IEC 1010-1 (2001) – Power supply overvoltage CAT II 240 V –
Overvoltage on measurement inputs CAT II 300V
NF EN 61326-1 07/97 + A1 10/98
To order :
- MTX3354E-C : 4 channels Digital
Oscilloscope-analyser, Colour 150 MHz, Ethernet
- MTX3354E-CK : MTX3354E-C
+ SX-METRO/P Software
- MTX3252BE-C : 2 channels Digital
Oscilloscope-analyser, Colour 60 MHz, Ethernet
- MTX3352BE-C : 2 channels Digital
Oscilloscope-analyser, Colour 100 MHz, Ethernet
- MTX3252BED : MTX3252BE-C
+ differential probe MTX1032-B
- MTX3352BED : MTX3352BE-C
+ differential probe MTX1032-C
Efficiency displayed with elegance
An attractive structure
and a shape that makes room
A leader in technology,
innovative to the fingertips
The MTX family’s appealing and modern design, which is especially compact, will fit
perfectly into your workspace.
Placed directly on a counter top, their design leaves great room in front of
them. Their height has been calculated so they fit nicely in half-shelf
spaces. Having a standard length and not very deep, they can be placed
on top of another instrument.
Since they have a built-in handle and are
light in weight, these instruments are
easy to displace and carry.
The qualities of the MTX are not limited to
their looks.
With the latest 16 or 32-bit microprocessors,
downloadable software and 100% digital
calibration, these instruments are smart too.
As for safety, resettable electronic protection
eliminates the need for the mains fuse on
certain models.
All the models in the MTX Compact family
can be fitted with high-performance communications interfaces and communication standard SCPI.
Even the selection keyboard is the
latest technology with its
microswitch contacts that have
an exceptionally long life span:
more than 100,000 maneuvers.
The markings on the keys are
made with permanent laser engraving.
Even at a distance or in poor light (sun, neon), the measurements are perfectly readable,
perfectly legible thanks to its large (50 x 140 mm), dark background display and
adjustable led-matrix backlighting as well as the exceptional height of the main display
of 20 mm (MTX 3240 and MTX 3250).
The very attractive adjustable LCD screen of the MTX 3352 and MTX 3252 is available
in monochrome and colour versions, with also excellent readability.
Situated on the front panel, the operations zones of the whole MTX Compact
family are large, coherent, and organized; and the measurement connections are
easily accessible.
On the generator and multimeter, primary functions are selected directly with
keys that are marked with their function and a led. A high-performance encoder
makes it possible to make settings, and contextual keys located at the edge of the
screen clearly show the configuration.
In addition to direct access via the keyboard, the oscilloscope is also controlled via the mouse,
under a “Windows-like” environment, facilitating learning. Unprecedented in this device
1694, 1694/1 Prachasongkhro Road,
Dindaeng, Dindaeng, Bangkok 10400
Tel. 02-692-3980, Fax. 02-692-3978
AD.COM- Code : 906211055 - Ed.4 - 12/2007 - • Non contractual document. Confirm specifications before ordering.
A user-friendly, man-machine interface
with exceptional readability
With the MTX family, Metrix makes it possible
for each professional to access instruments
which are the best of the best.