- No category
advertisement
Vacuum Venturi VAK 200
spectro pur
Dimensions: Vacuum Venturi VAK 200 propellant gas waste gas
Vacuum Venturi VAK 200
Product features
• All gas-wetted parts made of stainless steel
SS 316L
• High surface quality
• Connectors: In-/Outlet UNF 9/16-18
(1/4” VCR-compatible)
Product description
• By applying a vacuum in the course of a purge cycle the dilutional effect of purge and process gas can be improved significantly
• The vacuum venturi VAK 200 offers a simple and cost-effective alternative to a vacuum pump and can achieve an effective vacuum of up to 200 mbar
(abs) with a propellant gas pressure of approx. 7 bar
Technical Data
Materials body: venturi:
Propellant gas pressure
Weight
Inlets
Outlet
Temperature range
SS 1.4435 ESU/VAR
(SS 316L remelted)
SS 1.4404 ESU/VAR
(SS 316L remelted)
R a
< 0,25 µm Surface roughness
Pressure ranges
Propellant gas pressure: 6 - 8 bar
Achievable abs. pressure: max. 200 mbar s. flow curves
100 g
9/16-18 UNF
(1/4” VCR- male)
1/2”-tube
-20 to +70 °C
Propellant gas consumption and achievable absolute pressure on the vacuum side as a function of propellant gas inlet pressure
00 00
00 11 22 33 44
Absolute Pressure
55 66 77 88 99
Propellant gas consumption
Data sheet DES VAK200 - Edition 1007
Subject to alteration without prior notice
© Messer Cutting & Welding GmbH
Messer Cutting & Welding GmbH
Lärchenstr. 139a, D-65933 Frankfurt
Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 [email protected]
www.messer-cw.de
Vacuum Venturi VAK 200
spectro pur
Vacuum Venturi VAK 200
Vacuum as a function of the pressure on the waste gas side with a constant propellant gas pressure of 8 bar (absolute)
Absolute pressure
Vacuum side
00
Specifications
•
• SPECTROPUR - components guarantee maximum quality by using high grade materials
All parts which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning process SPECTROCLEAN and are then baked out. They then undergo the MEGACLEAN process in a cleanroom class 100/10, are
® assembled and packed in PE foil under an atmosphere of inert gas.
• SPECTROPUR - components undergo a 100%
Helium-leak-test and optionally a particle test
• Analysis of the metallic surfaces by the methods AES, ESCA and SEM (scanning electron microscopy) are available upon request.
Important note regarding component selection
• In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting components.
• The function of the vacuum venturi, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.
Data sheet DES VAK200 - Edition 1007
Subject to alteration without prior notice
© Messer Cutting & Welding GmbH
Messer Cutting & Welding GmbH
Lärchenstr. 139a, D-65933 Frankfurt
Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 [email protected]
www.messer-cw.de
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project