MITEL 5330 IP Phone User Guide Northwestern Michigan College

MITEL 5330 IP Phone User Guide
Northwestern Michigan College
®
The Mitel 5330 IP Phones is a full-featured, dual port, dual mode enterprise-class
telephone that provides voice communication over an IP network. It has a large
graphics display (160 x 320) and self-labeling keys. The 5330 IP Phone offers 24
programmable multi-function keys for one-touch feature access. The 5330 phone
provides ten fixed feature keys for convenient access to features such as Conferencing,
Redial, and many customizable user settings as well as navigational keys to access
various screens and application layers. The 5330 phone also feature a PC Companion
application, which is a PC-based desktop programming tool, that allows you to easily
configure your phone from your Personal Computer (PC).
The 5330 IP Phone
Feature
1) Display
2) Ring/Message
Function
Provides a large, high-resolution viewing area that assists you in selecting
and using phone features.
Flashes to signal an incoming call and to indicate a
message waiting in your voice mailbox.
2
3) Volume, Speaker Provide the following audio control
capability: and Mute controls
(UP) and
(DOWN) provide
volume control for the ringer, handset, and
handsfree speakers.
(SPEAKER) enables and disables Handsfree mode.
4) Fixed Function Keys
Gives you access to the following phone functions:
•
(APPLICATIONS): provides access to menus for your phone's
additional features.
(CANCEL): ends a call when pressed during the call, and,
•
when you are programming the phone, eliminates any input and
returns to the previous menu level.
(REDIAL): calls the last number dialed.
•
(HOLD): places the current call on hold.
•
•
(TRANS/CONF): initiates a call transfer or establishes a threeparty conference call.
•
(MESSAGE): provides access to your voice mailbox and flashes to
notify you of messages waiting in your voice mailbox.
Note : The Ring/Message indicator also flashes when messages are
waiting.
5) Keypad
Use to dial.
6) Navigation Page Keys
Use to display additional pages of information.
7) Programmable Feature Keys and Softkeys.
Provides 24 self-labeling keys that can be programmed as speed call
keys, fixed function keys, hard keys, applications, or line appearance
keys, according to your communication needs. On your home page, the
bottom key is always your Prime Line key. The top keys above the dark
line are softkeys.
8) Handsfree Speaker
Provides sound for Handsfree calls and background music.
9) Handset
Use for handset calls. If you are in headset or handsfree mode, you do
not need to use the handset.
3
Adjust the viewing angle
The stand built into your phone tilts to give you a better view of the
keys.
To tilt your telephone for better viewing:
1.
Turn the phone so that the front faces away from you.
2.
Hold the base unit firmly and press the release tabs on the sides of the stand
To detach the base unit.
3.
Hinge the hooks of the base unit into the notches on the back of the phone and
snap into place as follows:
a)
For a high-angle mount, hinge the two lower hooks into the bottom set of
notches and snap the two upper hooks into the middle set of notches.
b)
For a low-angle mount, hinge the two lower hooks into the middle set of notches
and snap the two upper hooks into the top set of notches.
4
5340 and 5330 IP Phone Window
1) Softkeys
Allow you to access specific call control features, which are context sensitive. Non-programmable
feature keys, which are specific to the application or state of the set. The 5330 provides three
softkeys.
2) Programmable Launch specific call control features
Use the Settings application or the PC Keys Companion application to program these keys.
The 5330 provides 8 per page (a maximum of 23 programmable keys plus 1 prime line
key). For instructions on programming the keys, see Programming Features on Your Keys.
3) Navigation Page
Display additional pages of information. The 5330 has two page navigation keys; back and next.
4) Status Line
Displays time, date, and icons indicating feature states as follows:
) - Indicates new voice mail.
Message Waiting (
) - Indicates that the phone is in headset mode.
Headset (
DND (
) - Indicates DND (Do not disturb) mode.
Logged in as ( ) - Indicates that a hot desk user is logged in.
Conference Unit (
) - Indicates that the Conference Unit is connected and
turned on.
5
5) Information Area
Provides prompts in most phone applications. Content changes based on the application.
6) Footer
Shows context and summary information based on information in the Programmable Keys area,
such as Page Indicators, numbers or items, and so forth.
MAKING AND ANSWERING CALLS
You can make a call using one of the following methods:
•
Dial the number using the dialpad (must dial 9 for outside dial tone).
•
Press the programmed key associated with the party you want to call. For more
information about programming keys, see Programming Features On Your Keys.
•
Use Phone Book (see Phone Book below).
Phone Book
To use Phone Book:
1. Press Phone Book (if available) or the key programmed as Phone Book.
2.
Enter the name of the desired party, as follows:
•
For each letter in the name, press the appropriate key on the keypad until the
letter is shown in the display. For example, if the letter C is required, press the
digit 2 three times.
•
Use the <— softkey to correct errors.
•
If the next letter in the name is on the same digit key as the previous letter,
press the —> softkey before proceeding.
•
If required, press —> softkey to add a space between the first and last name.
3.
Press the Lookup softkey.
4.
If no match exists, edit the original entry.
5.
If more than one match is found, press the Next softkey.
6.
Do one of the following:
•
To make the call, press the Call softkey.
•
To edit the entry, press the Backup softkey.
•
To exit, press Cancel or Superkey.
Answer a call
Do one of the following:
•
Select the programmable line key.
6
•
Lift the handset or press
(SPEAKER).
End a call
Do one of the following:
•
Press Hang Up or Cancel, (
•
Replace the handset.
•
Press the key that you have programmed as Cancel.
•
If you are in Handsfree mode, press
)
(SPEAKER).
Redial
To redial the last number that you manually dialed:
1.
Lift the handset (optional).
2.
Press
(REDIAL).
Redial – Saved Number
To save the last number that you manually dialed:
1. Lift the handset.
2. Dial *9
To Redial a saved number:
1. Lift the handset.
2. Dial #9
Handsfree Operation
To use Handsfree to make a call:
1.
If you want to use a Non–Prime Line, press a Line Appearance key.
Note: Your administrator must program Line Appearances to your phone.
2.
Dial the number.
3.
Begin speaking when the called party answers. Your phone's Handsfree microphone and
Handsfree speaker transmit and receive audio.
To use Handsfree operation to answer calls:
1.
Press the flashing line key.
2.
Begin speaking. Your phone's Handsfree microphone and Handsfree speaker transmit
7
and receive audio.
To hang up while using Handsfree operation:
•
Press
(SPEAKER).
To turn Mute on during Handsfree operation:
•
Press
(MUTE). The Mute key light turns ON.
To turn Mute off and return to conversation:
•
Press
(MUTE). The Mute key light turns OFF.
To disable Handsfree operation:
•
Lift the handset.
To return to Handsfree operation:
1.
Press
(SPEAKER).
2. Hang up the handset.
Mute
Mute lets you temporarily turn your phone's handset, headset or handsfree microphone off
during a call.
To turn Mute on during a call:
•
Press
(MUTE). The
(MUTE) light turns ON.
To turn Mute off and return to the conversation:
•
Press
(MUTE). The
(MUTE) light turns OFF.
Note: If you are on a Handsfree MUTED call and you lift the handset, the handset microphone is
automatically enabled and the MUTE light turns OFF.
CALL HANDLING
Hold
To place a call on Hold:
• Press
(HOLD).
To retrieve a call from Hold, do one of the following:
8
• Lift the handset and press the flashing line.
Transfer
To Transfer an active call:
1. Press
(TRANS/CONF).
2. Dial the number of the third party.
3. Do one of the following:
•To complete the Transfer, hang up.
•To announce the Transfer, wait for an answer, consult, and hang up.
(CANCEL).
•To cancel the Transfer, press
Conference
To form a Conference when a two–party call is already in place, or to add another party to an
existing Conference:
1. Press
(TRANS/CONF).
2. Dial the number of the next party.
3. Wait for an answer.
4. Press
(TRANS/CONF).
To leave a Conference:
• Hang up or press
(CANCEL).
Conference Split
To Split a Conference and speak privately with the original party:
• Press the Split softkey.
Add Held
To move a call on hold to another line appearance:
1. Press an available line key.
2. Press the AddHeld softkey.
3. Press the flashing line key.
To add a call on Hold to an existing conversation or conference:
1. Press the AddHeld softkey.
2. Press the flashing line key.
9
Swap
To call another party when you are in an established two–party call:
(TRANS/CONF).
1. Press
2. Dial the number.
To alternate between the two parties:
• Press the Trade Calls softkey.
Call Forwarding
Call Forward lets you redirect incoming calls to an alternate number when your phone is busy,
when you're not answering, or all the time.
USING QUICK CALL FORWARD ALWAYS
To program and enable Call Forward Always:
1.
2.
: and press Call Forwarding
Launch Applications •
If a number is already programmed, you can
 Press Activate to enable forwarding to the current number
or
 Enter a new destination number and then press Activate.
Note: Call Forward Always takes precedence over all other types of forwarding.
To deactivate Call Forward Always:
1.
2.
Launch Applications•
Press Deactivate.
: and press Call Forwarding
USING OTHER FEATURES
Callback
The Callback feature allows you to be notified when a busy phone becomes free or when a phone
has been used after a no-answer condition was encountered.
To request a Callback when you reach a busy or unanswered station:
1.
2.
Press Call Me Back.
Hang up.
When the party is available, your phone starts ringing, and the display shows the Callback ringing
indicator.
10
To answer a Callback:
•
When you see the Callback ringing indicator, lift the handset.
CANCEL CALLBACKS
To cancel a specific Callback:
1. Press ##1
2. Enter the Extension number to cancel.
To cancel All Callbacks:
1. Press #1
Call Pickup
To answer a call that is ringing at another extension in your Pickup Group:
1. Lift the handset.
2. Press the Pickup Softkey.
To answer a call that is ringing at another extension not in your Pickup Group:
1.
Lift the handset.
2.
Dial #7.
3.
Dial the number of the ringing station.
Speed Call
Speed Call is an application that allows you to dial a specific number with one key press. You
must program Speed Call on a Programmable key. For more information on programming this
key, see Program Feature Keys Using the Settings Application.
To make a Speed Call:
•
Press the key that you have programmed as your Speed Call key.
Speed Call – Personal
To Store a Personal Speed Call number:
1.
2.
3.
4.
5.
Lift the handset.
Dial *56.
Enter an index number between 00 and 09.
Dial the number to be stored.
Hang up.
To Dial a stored Personal Speed Call number:
11
1. Lift the handset.
2. Dial #56.
3. Enter an index number between 00 and 09.
Adjust the Ringer (Volume & Pitch)
To adjust the Ringer Volume/Pitch while the phone is idle:
1.
2.
3.
4.
6.
5.
Superkey (must be programmed to a key).
the No softkey until "Ringer Adjust?" appears.
“Ring Adjust”.
“Ringer Pitch”
OR
Press the No softkey to get to Ringer Volume
Press “Ringer Vol”.
Press
Press
Press
Press
For both settings
6.
7.
Press
(UP) or
(DOWN), to either adjust the volume or listen to the
different pitches – if adjusting pitch to save the desired pitch pick up the
handset and replace it.
Press Superkey.
Note: Adjusting ringer volume also adjusts cordless headset/handset ringer tone.
To adjust the Ringer Volume while the phone is ringing:
 Press
(UP) or
(DOWN).
Notes: If the phone is in talk state, this action adjusts the volume of the handset, headset or
speaker. If the phone is idle, this action adjusts the contrast.
USING YOUR PHONE APPLICATIONS
Your 5330 IP Phones provide applications that simplify the use of your phone.
To open the Applications window, press the blue Applications
window gives the current status of your phone’s applications.
key. The Applications home
To open an application, press the key beside the application name:
•
Call Forwarding: Use the Call Forwarding application to quickly set Call Forward Always
and to create Call Forward profiles that identify where to send your incoming calls. The Call
Forwarding window shows a list of your Call Forwarding profiles and indicates which one is
active. See Call Forward for more information on how to add, edit, delete, and activate Call
Forwarding profiles.
•
Call History: Use the Call History application to display lists of the calls that you have
missed, made, and answered. This feature allows you to filter the call records and display
information on each call on the list. See Using the Call History Application for more information.
•
Conference Unit: Use the Conference Unit application to control the 5310 IP
12
Conference Unit. Use this application to turn the conference unit off or on, to adjust the volume,
or to put the conference unit into Presentation mode. You can only run one Conference Controller
session at a time. The Conference Unit application is available only when your phone is
connected to a 5310 Conference Unit. See Using Your Phone with the 5310 Conference Unit for
more information.
•
Cordless Module and Accessories: Use the Cordless Module application to configure
and view status of cordless accessories. See Using the Cordless Module for more information.
•
Settings: Use the Settings application to display and quickly change your phone’s
current communications settings. See Using the Settings Application for more information.
•
Launch PC Application: Provides a launch point to the PC Companion Application. See
Using the PC Companion Application for more information.
•
Help: Provides access to Launch PC Help and Quick Help and displays a list of the key
icons.
•
Call Info: Use the Call Info application to display caller information on your phone’s
prime line. Call Info appears automatically on incoming calls if the Call Notification— Display Call
Info Setting is enabled and Call Info is available
Using the Settings Application
The Settings application provides a single location to access all your phone settings.
The Settings window provides access to the Settings application. Select any of the options below
to access a window where you can view and configure settings for your phone. The Settings
window provides the following:
•
Programmable Keys: Use to assign features to the Programmable Keys that are
available in the Phone application.
•
Languages: Allows you to select the language in which phone prompts and applications
appear. Supported languages are English, French, Spanish, German, Dutch, Italian, and
Portuguese. Note: The system can support up to three languages at one time. Language choices
appearing in the phone display are controlled by ICP programming.
•
Text Size: Allows you to specify the font size (large or small) for the 5340 IP Phone.
•
Call Notification: Use to specify that the Phone application behavior when incoming or
outgoing calls occur.
•
Brightness and Contrast: Allows you to adjust the display brightness and contrast of
your phone.
•
Screen Saver: Allows you to specify a specific time of inactivity on your phone that
triggers the screen saver to display.
•
Audio Feedback: This setting allows you to adjust the volume of the audio feedback as
well as the error beeps and enable or disable the setting.
•
Message Key Configuration: Allows you to configure the Message
key.
•
PC Connectivity: Allows you to enter a password that is used by the phone to establish
communications with the PC-resident 5330/5340 Companion application.
•
About 5330 IP Phone: This screen displays the software release.
13
Call History
Use this application to display logs of your most recent 50 calls. After the 50-call limit has been
reached, the oldest log is replaced each time a new call is missed, made, or answered.
From this application, you can
•
•
•
•
•
display logs by type
display call information (if available) for the logs
return missed calls by pressing a key
delete or modify digits before saving or dialing a call
delete logs
If you are a hot-desk user, you can view and maintain your call history logs when you are logged
into another extension.
View Call Log Details
key and then press Call History.
1. From the idle display, press the blue Applications
(Missed Calls) appears next to the key label if you have missed calls.
2. Press
•
•
•
•
Missed to view your missed calls (if any).
All to view a list of all logs (5340 IP only)
Answered to view logs of your incoming calls
Made to view logs of your outgoing calls.
3. Use the navigation keys at the bottom of the display to move to the
previous, first, or next page of logs. The total number of logs in the current list is shown in
the bottom left corner of the display. The bottom right corner shows the range of logs (for
example 1 -7) that are currently displayed.
4. Press the key to the left of the log to display the call details:
•
•
•
•
•
Name and number (if available)
Log type and number of attempts (for example 2x)
Type of call: Transfer (Tsf.) or Conference (Conf.)
Time and date of log
Duration of call in hours:minutes:seconds (for Made and Answered logs).
5. Do one of the following:
•
•
•
If necessary, use the keypad, Delete Digit, and Backspace keys to modify the
number. Press Dial to call the number
or at the bottom of the set to display details for
Press
another log.
Press Close to return to the previous list. Review Call Log Icons
Delete Logs
To delete an individual log press the key to the left of the log to display the call details and
14
then press Delete Log Entry.
To delete all logs by type
1. From the idle display, press the blue Applications
key and then press Call History.
or Press the Call History feature access key. (Missed Calls) appears next to the key
label if you have missed calls.
2. Press
•
•
•
•
3.
4.
Missed to view your missed calls (if any)
All to view all logs (5340 IP only)
Answered to view logs of your incoming calls
Made to view logs of your outgoing calls.
Press Delete List to delete all logs from the currently displayed list.
You are prompted to confirm the delete. Press Delete.
To access the 5330 IP Phone help and documentation:
1. Press the blue Applications
key.
2. Press Help. You have the following options:
•
•
Press Key Icons or Quick Help.
Press
or at the bottom of the set to view items for the selected
help option.
3. Press Close.
Specify User Information
To specify the phone number displayed on your phone:
1.
2.
3.
4.
5.
6.
7.
9.
Press Settings.
Press User Information.
Press Edit Name.
Using the dial pad, press the appropriate letters to spell your name.
Press Save.
Press Edit Number.
Using the dial pad, press the appropriate numbers for your line.
Press Save again.
Note: Press Cancel at any time to exit this application without making any changes or
press Clear to clear the entered name and number.
15
To Specify Language:
Press Settings.
Press the Language setting.
The phone displays the three language selections that are currently
programmed in the ICP.
3. Select the appropriate language and press Save. The phone displays your chosen language.
1.
2.
Specify Display Brightness and Contrast
You can adjust the brightness and display contrast either via the phone volume controls (when
the phone is idle) or via the Settings application. (Brightness adjustment on a 5330 IP Phone is
available on models with backlit displays only.)
To adjust the display contrast using the volume controls:
•
Repeatedly press
(UP) or
(DOWN).
Note: You can use this method only when the phone is idle. If the phone is ringing, this action
adjusts the ring volume. If the phone is in use, this action adjusts the handset, headset and
speakerphone volume.
To adjust the display brightness and contrast using the Settings application:
1.
2.
3.
Press Settings.
Press Brightness and Contrast.
Press the Brightness and Contrast keys to adjust the brightness and contrast of
your screen.
4.Press Save.
To Adjust the Feedback Volume:
1. Press Settings.
2. Press Audio Feedback.
3. Set the options using the appropriate actions described below:
Option Action
Turn audio feedback off for errors Press Turn Off.
Adjust audio for error beeps Press Volume + or Volume –
Turn audio feedback on for errors Press Play Error Tone
4. Click Save.
Specify Text Size :
To specify the text size that displays on the phone:
1.
1. Press Settings.
2.
2. Press Text Size.
3.
3. Select Large Text or Small Text.
4.
4. Press Save.
Program Feature Keys Using the Settings Application
16
To program a Phone Feature or hard key:
1. Press blue Applications
2. Press Settings .
3. Press Programmable Keys.
4. Press the key you wish to program.
5. Press View Features.
6. Use the Page Navigation keys to move through the features list.
7. Select the desired feature or fixed function key from the list. A default label is
automatically assigned to the key.
8. Enter the required information in the fields provided, if necessary.
9. Press Save.
10. Press Close.
To program a Phone Application:
1. Press blue Applications
.
2. Press Settings.
3. Press Programmable Keys.
3. Press the key you wish to program.
4. Press View Applications.
5. Select the desired application.
6. Press Save.
7. Press Close.
To program Speed Call:
1. Press blue Applications
.
2. Press Settings.
2. Press Programmable Keys.
3. Press the key you wish to program.
4. Press Speed Call.
17
5. Press Edit Label and enter the label for the Speed Call.
6. Press Save.
7. Press Edit Number and enter the phone number for the Speed Call:
- The maximum length is 26 characters.
- 0-9, # and *. Pause and Flash are not allowed.
- The hard dialpad cannot be used to enter the number.
8. Press Save, and then press Save again.
9. Press Close.
Clear Programming from a Key
You may wish to clear the programming from a key if you are no longer using it.
To clear the feature or application programming from a key:
1. Press blue Applications
.
2. Press Settings.
2. Press Programmable Keys.
3. Press the key you wish to clear.
4. Press Clear Key.
Either press Cancel or reprogram the key.
18