AddPac VoiceFinder AP-MG3000N Installation guide

VoiceFinder AP1000
VoIP Gateway
Installation Guide
Release 1.0
June. 2003
AddPac Technology Co., Ltd.
2/ 3F, Jeong-Am Bldg, Kangnam-Gu,
Seoul, Korea. Zip 135-080
Phone (82 2) 568-3848
Fax (82 2) 568-3847
E-mail: info@addpac.com
http://www.addpac.com
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
[Contents]
About This Guide
Chapter 1. VoiceFinder AP1000 VoIP Gateway Overview ......................................................................10
Introduction to VoiceFinder AP1000 VoIP Gateway........................................................................10
Main Features .....................................................................................................................................12
Hardware Description ...................................................................................................................12
Voice over IP Service....................................................................................................................13
IP Routing Protocols .....................................................................................................................13
Network Managements .................................................................................................................14
Security Functions ........................................................................................................................14
PSTN Backup Functions...............................................................................................................14
Operation and Managements .......................................................................................................15
Other Scalability Features.............................................................................................................15
Hardware Configuration and Network Interfaces ...........................................................................16
VoiceFinder AP1000 Gateway Part & Description ........................................................................16
Front View of AP1000 ...................................................................................................................16
Rear View of AP1000....................................................................................................................17
Network Interface..........................................................................................................................19
Voice Processing Interfaces .........................................................................................................20
Chapter 2. Before Installation ...................................................................................................................21
Installation Requirements .................................................................................................................21
Electrical Requirements ................................................................................................................21
General Requirements..................................................................................................................22
Network Connection Requirements .................................................................................................23
Necessaries ..................................................................................................................................23
Ethernet Port .................................................................................................................................24
RS-232C Serial Console Port .......................................................................................................24
Chapter 3. Gateway Installation................................................................................................................25
Unpacking ...........................................................................................................................................25
VoiceFinder AP1000 Interfaces and Cable connection ..................................................................26
Async Serial Interface Connection................................................................................................26
Ethernet Interface Connection ......................................................................................................26
PSTN Interface Connection ..........................................................................................................28
FXS Voice Interface Connection ...................................................................................................29
AddPac Technology Co., Ltd.
42/ 2
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Booting................................................................................................................................................30
Use Console terminal with HyperTerminal....................................................................................32
Chapter 4. Appendix ..................................................................................................................................38
VoiceFinder AP1000 Gateway Technical Description.....................................................................38
Cable Specification ............................................................................................................................41
AddPac Technology Co., Ltd.
42/ 3
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
[Table of Figures]
Figure 1-1: The network diagram using VoiceFinder AP1000 Gateway .....................................................10
Figure 1-2: The exterior view of VoiceFinder AP1000 Gateway ................................................................. 11
Figure 1-3: VoiceFinder AP1000 Gateway front view..................................................................................16
Figure 1-4: The rear panel image of VoiceFinder AP1000 Gateway...........................................................18
Figure 3-1: Connect VoiceFinder AP1000 Gateway and Console PC ........................................................26
Figure 3-2: Connect VoiceFinder AP1000 Gateway with WAN and normal PC..........................................27
Figure 3-3: Connect VoiceFinder AP1000 Gateway and a PSTN line ........................................................28
Figure 3-4: Connect VoiceFinder AP1000 Gateway and a normal telephone ............................................29
Figure 3-7: MS-Windows Communication Emulator HyperTerminal...........................................................32
Figure 3-8: Assign a name for the new connection .....................................................................................33
Figure 3-9: Select the interface for Console cable ......................................................................................34
Figure 3-10: COM1 Properties ....................................................................................................................35
Figure 3-11: The HyperTerminal message of VoiceFinder AP1000 Gateway .............................................37
Figure 4-1: 10Base-T RJ-45 Connector ......................................................................................................42
AddPac Technology Co., Ltd.
42/ 4
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
[Table of Tables]
Table 1-1: The interfaces and explanation of the front panel of AP1000 ....................................................17
Table 1-2: The interfaces and explanation of the rear panel of AP1000 Gateway ......................................18
Table 3-1: VoiceFinder AP1000 Gateway package .....................................................................................25
Table 4-1: The transferred signal and Pinout specification .........................................................................41
Table 4-2: Signal and Pinout of Direct Ethernet Cable................................................................................42
AddPac Technology Co., Ltd.
42/ 5
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
About This Guide
This chapter outlines the structure of VoiceFinder AP1000 VoIP Gateway Installation
Guide and explains the symbols and legends.
[Organization]
The VoiceFinder AP1000 VoIP Gateway Installation Guide is offered to assist the
operation VoiceFinder AP1000 VoIP Gateway. This manual is composed of 4 chapters.
Experienced users may refer directly to the related chapters.
However, less
experienced users are highly recommended to thoroughly review this manual before
operation of the gateway.
z
Chapter 1 『VoiceFinder AP1000 VoIP Gateway Overview』provides an
introduction to the H/W and S/W of VoiceFinder AP1000 VoIP Gateway and how to
apply for the technical supports.
z
Chapter 2 『Before Installation』provides an explanation on the installation
environment and cable requirements along with recommendations for safe
operation of the equipment.
z
Chapter 3『Gateway Installation』explains the basic installation information on
connecting the gateway with cables, operating Console terminal and etc.
z
Chapter 4 『Appendix』includes the specification of the gateway, the cable and
etc.
AddPac Technology Co., Ltd.
42/ 6
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
For technical supports, please contact AddPac Technology Co. Ltd.
AddPac Technology Co., Ltd
2/ 3 Fl. Jeong-Am Bulding, 769-12 YeoksamDong, Kangnam-Ku, Seoul, Korea
Phone (02) 568-3848
Fax (02) 568-3847
E-mail: info@addpac.com
http://www.addpac.com
AddPac Technology Co., Ltd.
42/ 7
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
The revision history of VoiceFinder AP1000 VoIP Gateway Installation Guide is as
follows.
Revision No.
Date
Comments
Version 1.0
June 2003
1 Edition
AddPac Technology Co., Ltd.
st
Written by
AddPac
R&D Center
42/ 8
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
[Symbols and Legends]
The symbols and legends used in this User’s Manual are as follows:
z
Commands and Keywords are typed in Bold.
z
Variables that require user inputs are typed in Italic.
z
Square brackets ([]) are optional values.
z
Keywords that are required but need to be selected are grouped in braces ({}) and
are separated by Slashes (/).
z
Angle brackets (<>) are required parameters must be inputted.
The following conventions are also used to attract the user’s attention.
Danger
Danger
This symbol signals possible danger. Misuse could result in
physical injuries. Please follow the instructions to avoid any
electronic shocks.
Warning
Warning
It warns the users to be careful with the operation.
STOP
Caution
Otherwise, it
could result in hardware damage of the equipment or loss of
data.
Caution
This symbol calls for the user’s caution. Otherwise, it could result
in hardware damage of the equipment, loss of data or system
configuration.
Information
Information
This symbol indicates additional information offering detailed
information for understanding this user guide.
AddPac Technology Co., Ltd.
42/ 9
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Chapter 1.
VoiceFinder AP1000 VoIP Gateway
Overview
Introduction to VoiceFinder AP1000 VoIP Gateway
Information VoiceFinder AP1000 VoIP Gateway offers Voice over IP service by connecting Local
Area Networks, Wide Area Network or broadband network of ADSL.
The below is the network diagram using VoiceFinder AP1000 Gateway.
Figure 1-1: The network diagram using VoiceFinder AP1000 Gateway
AddPac Technology Co., Ltd.
42/ 10
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
It supports IEEE Spanning Tree Bridging function and it can be used for routing of both
small and large-scale networks.
VoiceFinder AP1000 Gateway supports inter-operability with carrier-class backbone
gateways, gatekeepers and routers along with existing AddPac VoIP gateway series
realizing easy installation and maintenance.
The below figure is the exterior view of VoiceFinder AP1000 Gateway.
Figure 1-2: The exterior view of VoiceFinder AP1000 Gateway
As a supplementary service, VoiceFinder AP1000 Gateway provides Packet Filtering
and Firewall function using Access List method.
The Firewall function restricts access
to the local network from outside networks using source and destination IP address
access list information at the Network Layer (IP Layer) and at the Transport Layer
(TCP/UDP Layer).
Also, using DHCP (Dynamic Host Configuration Protocol), this equipment can assign IP
addresses to network clients automatically (DHCP server mode) and can receive a
dynamically assigned IP address from a DHCP Server (DHCP client mode).
VoiceFinder AP1000 Gateway solves the IP address shortage problem by using NAT
(Network Address Translation) protocol.
AddPac Technology Co., Ltd.
42/ 11
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Main Features
Information VoiceFinder AP1000 Gateway provides high-performance Voice over IP (VoIP) solution
maintaining best voice quality with the latest voice compression algorithm and offers
high-speed Internet access service for small enterprises, government and other public
offices.
It is equipped with a WAN port (10Mbps Ethernet port) for XDSL modem
connection and up to 4 FXS voice interfaces.
Especially, VoiceFinder AP1000 Gateway is the ultimate solution for Small Medium
Enterprise (SME) environment with its superior price vs. performance ratio.
It is ideal
for both enterprise users and ordinary house with high-speed Internet subscribers of
ADSL and cable modem.
Also, VoiceFinder AP1000 Gateway is easy to install and operate, even for first time
users and offers Static, RIP v1/2 and OSPF v2 routing function.
It is the most
economic and effective solution for high-speed Internet access VoIP residential
gateway.
Hardware Description
VoiceFinder AP1000 Gateway offers the various network interface and ample system
memory based on latest Embedded H/W technology and system memory. The main
H/W features are as followings.
z
High Performance WAN-to-LAN Residential VoIP Gateway
z
High Performance 32bit RISC Microprocessor
z
Stable, Fixed Network interface structure
z
1-Port 10Mbps Ethernet Interface for WAN Interface (RJ45)
z
1-Port 10Mbps Ethernet Interface for LAN Service (RJ45)
z
4-Port FXS Voice Interface (RJ11)
z
1-Port PSTN Backup Port (RJ11)
z
1-Port Async Serial Interface for Console Port (RJ45)
z
Compact, stylish design
z
AC-DC External Power Supply Adapter
z
Various System LEDs
AddPac Technology Co., Ltd.
42/ 12
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Voice over IP Service
z
VoiceFinder AP1000 Gateway supports voice and data integration service, VoIP
service.
z
Offers 4-channel voice ports and offers VoIP service by interoperating with PBXs,
ordinary telephones and fax machines.
z
Supports industry standard VoIP protocols such as H.323, SIP and MGCP.
z
High performance DSP supports various voice compression algorithms such as
G.723.1, G.729.A, G.711 and etc.
z
Supports various voice-processing functions of VAD, DTMF & FAX Tone auto
detection, CNG, Echo Cancellation and etc.
z
Supports T.38 G3 FAX Relay.
z
Interoperable with H. 323 based Gateways and Gatekeepers
z
Interoperable with SIP Proxy Servers
z
Interoperable with MGCs
IP Routing Protocols
VoiceFinder AP1000 Gateway supports various IP routing protocols. The main IP
routing features are followings.
z
Supports various IP routing and bridging protocol
z
Static, RIP v1/v2, OSPF v2 routing protocols
z
Transparent Bridging (IEEE Spanning Tree Protocol)
AddPac Technology Co., Ltd.
42/ 13
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Network Managements
VoiceFinder AP1000 Gateway supports various network management protocols and
functions.
z
Standard SNMP Agent (MIB v2), MIB II, Bridge MIB Support
z
Consols function with Async. Port.
z
Remote Management using Console, Rlogin, Telnet.
z
Traffic Queuing
z
Web based Managements
Security Functions
VoiceFinder AP1000 Gateway supports various security functions.
z
Standard & Extended IP Access List for network security function.
z
Enable/Disable for Specific Protocols
z
Multi-level User Account managements
z
Auto-Disconnect for Telnet/Console Sessions
PSTN Backup Functions
VoiceFinder AP1000 Gateway supports PSTN Backup function.
z
Real-time monitoring and switching to PSTN in case of network failure
z
Real-time monitoring and shutting down the port or generating busy tone.
AddPac Technology Co., Ltd.
42/ 14
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Operation and Managements
VoiceFinder AP1000 Gateway supports following operation and maintenance features.
z
System Performance Analysis for Process, CPU, Connection I/F
z
Configuration Backup & Restore for APOS Managements
z
Debugging, System Auditing, and Diagnostics Support
z
System Booting and Auto-rebooting with Watchdog Feature
z
Data logging as various format
z
IP Traffic Statistics with Accounting
Other Scalability Features
VoiceFinder AP1000 Gateway supports various supplementary service functions.
z
DHCP server and relay function for easy IP management
z
NAT/PAT function for effective IP management
z
Remote S/W upgrade with TFTP & FTP
z
Industry standard Command Line Interface type operation
z
Network Time Protocol (NTP)
AddPac Technology Co., Ltd.
42/ 15
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Hardware Configuration and Network Interfaces
Information This chapter explains the external form and network interfaces of VoiceFinder AP1000
Gateway.
VoiceFinder AP1000 Gateway Part & Description
VoiceFinder AP1000 Gateway is made by the high intensity ABS with compact design.
The front panel of VoiceFinder AP1000 Gateway includes various LEDs indicating the
operational status of the device.
On the rear panel, there is a LAN0 interface for WAN
connection and LAN1 interface for LAN connection.
Front View of AP1000
The front panel of VoiceFinder AP1000 Gateway includes various LEDs indicating the
operational status of the device. The following figure is the external form of VoiceFinder
AP1000 Gateway.
Figure 1-3: VoiceFinder AP1000 Gateway front view
AddPac Technology Co., Ltd.
42/ 16
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Table 1-1 shows the functional explanation about each LED of VoiceFinder AP1000
Gateway.
Table 1-1: The interfaces and explanation of the front panel of AP1000
No.
LED
(1)
POWER
Power LED, display whether external power is supplied normally or
not. (Green)
LAN 0
(2)
Description
LINK/RUN
LAN 0 LED, display the Ethernet port’s status (Green)
RUN LED, display whether the equipment is operated normally or not.
(Orange)
LAN 1
(3)
LINK/RUN
LINK 1 LED, display whether Ethernet ports is in use or not. (Green)
RUN LED, display whether the equipment is operated normally or not.
(Orange)
(4)
(5)
(6)
(7)
(8)
PSTN
PSTN LED, display whether the LED is in use or not.
Back Up
Display of PSTN BackUp port’s activity status. (Yellow)
FXS 0/0
FXS 0/0, display whether this port is in use or not. (Yellow)
PHONE 0
Display the Operation Status of the number 0 Voice Port.
FXS 0/1
FXS 0/1, display whether this port is in use or not. (Yellow)
PHONE 1
Display the Operation Status of the number 1 Voice Port.
FXS 0/2
FXS 0/2, display whether this port is in use or not. (Yellow)
PHONE 2
Display the Operation Status of the number 2 Voice Port.
FXS 0/3
FXS 0/3, display whether this port is in use or not. (Yellow)
PHONE 3
Display the Operation Status of the number 3 Voice Port.
Rear View of AP1000
The rear side of the VoiceFinder AP1000 VoIP Gateway includes 10Mbps Ethernet
Interface ports for WAN/LAN interfaces, RS-232C serial port for management, and FXS
interface ports for voice signal processing.
It can also form network environment for
WAN-to-LAN routing service.
Following figure shows the standard configuration of the back panel of VoiceFinder
AP1000 gateway.
AddPac Technology Co., Ltd.
42/ 17
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Figure 1-4: The rear panel image of VoiceFinder AP1000 Gateway
The following Table 1-2 explains the rear side panel interface of AP1000 VoIP gateway.
Table 1-2: The interfaces and explanation of the rear panel of AP1000 Gateway
No.
Interface
(1)
DC Power
(2)
FXS (0, 1, 2, 3)
Explanation
External DC Power Supply Input
4 FXS Ports : As FXS Voice Interface Ports, Phone or Fax
Machine can be connected.(4 x RJ11)
Directly
(3)
PSTN
connected
with
PSTN
subscriber
lines
of
telecommunication service provider for PSTN Backup
service. (RJ11)
(4)
LAN0
10Mbps Ethernet Port for WAN interface (RJ45)
(5)
LAN1
10Mbps Ethernet Port for LAN interface (RJ45)
(6)
Console
RS-232C serial port for system management (RJ45)
AddPac Technology Co., Ltd.
42/ 18
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Network Interface
VoiceFinder AP1000 gateway supports the following network interfaces:
z
1 Port 10Mbps Ethernet Interface for WAN
z
1 Port 10Mbps Ethernet Interface for LAN
z
1 Port RS232C Asynchronous Serial Interface
With the above network interface, VoiceFinder AP1000 Gateway can establish WAN
and LAN network supporting TCP/IP network protocol.
So it can easily form VoIP
network on the broadband network of ADSL and Cable Modem. Also, the Console
port offers easy configuration of the gateway.
The next section explains the network interfaces of VoiceFinder AP1000 Gateway.
1-Port 10Mbps Ethernet WAN Interface (RJ45)
VoiceFinder AP1000 Gateway supports one (1) 10Mbps Ethernet Interface for WAN
environment formation. It is a RJ45 type standard interface.
1-Port 10Mbps Ethernet LAN Interface (RJ45)
VoiceFinder AP1000 VoIP Gateway offers one (1) 10Mbps Ethernet interface to form
Local Area Network (LAN). It is a RJ45 type standard interface.
1-Port Async. Serial Interface for Console Port (RJ45)
VoiceFinder AP1000 Gateway provides network management features using an RS232C asynchronous serial interface port.
AddPac Technology Co., Ltd.
42/ 19
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Voice Processing Interfaces
The fixed voice interface of VoiceFinder AP1000 Gateway can be connected to the
ordinary telephones, fax machines and PBX.
z
FXS Interface voice processing port
z
PSTN Backup Interface
VoiceFinder AP1000 Gateway is a network device offering not only data service, but
also voice service at one device.
4- Port FXS Voice Interface
VoiceFinder AP1000 Gateway supports four (4)-port FXS (Foreign Exchange Station)
Voice Interfaces. Using these FXS Voice Interfaces, VoiceFinder AP1000 Gateway
provides analog line interface solutions, which can interface to general phone, FAX
Machine, etc.
1-Port PSTN Backup Interface
VoiceFinder AP1000 Gateway offers one (1) PSTN Backup port, which can be
connected to PSTN line and make calls and receive calls directly.
AddPac Technology Co., Ltd.
42/ 20
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Chapter 2.
Before Installation
Installation Requirements
Warning
The following recommendation should be followed for safe operation of the product.
z
Ensure VoiceFinder AP1000 Gateway is in a dust-free environment before and
after installation.
z
Make sure to install VoiceFinder AP1000 Gateway on a flat and safe surface.
z
To prevent accidents, be careful with ties, scarf, sleeves, and any other loose
clothing from entangling with the chassis.
z
Avoid any actions that may effect the equipment or the operator.
Electrical Requirements
Danger
There are two main sources of electrical problems with VoiceFinder AP1000 Gateway:
the power supply and static electricity.
This section describes safety recommendations for each case.
z
Electrical Safety
9
Operate at a position where immediate shut-off of power supply is possible.
9
Turn off the power while installing the equipment.
9
Avoid operating the equipment alone at potentially dangerous environment.
9
Do not assume the power is switched off, but always confirm the power status.
9
Be extremely cautious when operating in a humid environment or with an
ungrounded power extension cable.
AddPac Technology Co., Ltd.
42/ 21
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
z
Prevention of Static Electricity
9
The main chip-set of the Gateway is very delicate and misuse may result in
static electrical damage.
9
If a static prevention wrist strap is available, strap it around the wrist and earth
the cord before operating the equipment.
9
If no wrist strap is available, earthening by holding a metal part of the Chassis
will help prevent static electricity.
General Requirements
Warning
VoiceFinder AP1000 Gateway is ready for use where other electronic products can be
used. However, the following conditions are recommended for maximum performance.
•
A flat and well ventilated location.
•
Secure the equipment safely at the desired place to install
•
Do not place any objects on top of the equipment.
•
A location without direct sunlight.
•
Keep away from flammable, chemical, or magnetic objects.
AddPac Technology Co., Ltd.
42/ 22
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Network Connection Requirements
Consider EMI Standard and distance limitation while installing VoiceFinder AP1000
Warning
Gateway.
The below explains PSTN cable, Ethernet cable, Console Cable of VoiceFinder AP1000
Gateway.
Necessaries
Unless ordered in advance, the tools and certain cables are not provided in the
package. Prepare the following equipments and tools before the installation.
z
Standard screwdriver set
z
Cables for LAN and Console port connection
z
9
RJ-45 to RJ-45 cable for LAN port
9
RS-232C Console cable with RJ-45 connector (included in the package)
Cable to connect Phone port
9
RJ-11 to RJ-11 ordinary telephone cable
AddPac Technology Co., Ltd.
42/ 23
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Ethernet Port
VoiceFinder AP1000 Gateway offers two (2) RJ45 type 10BaseTX Ethernet Ports on
the rear panel and LEDs are indicating the port status are on the front panel. The PIN
information of the Ethernet cable, refer to Chapter 4.
RS-232C Serial Console Port
VoiceFinder AP1000 Gateway offers one (1) RJ-45 type RS-232C connector on the
rear panel.
This port is for the initial configuration, monitoring and debugging.
The
PIN information of the RS-232C Console cable, refer to Chapter 4.
AddPac Technology Co., Ltd.
42/ 24
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Chapter 3.
Gateway Installation
Unpacking
Before unpacking, check for external damage to the packaging box.
If no external damages are found, confirm if the following items are enclosed.
Table 3-1: VoiceFinder AP1000 Gateway package
No.
1
Item
VoiceFinder AP100X Gateway
2
3
Main Body
Ethernet Cable
(RJ45 to RJ45)
Console Cable
(RJ45 to DB9)
Contents
Q’ty
1
1
1
Power supply
4
External Adapter
1
(110V/220V)
If any item is missing, immediately contact AddPac Technology Co. Ltd.
customer support.
AddPac Technology Co., Ltd.
42/ 25
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
VoiceFinder AP1000 Interfaces and Cable connection
z
Install VoiceFinder AP1000 Gateway at the suitable place illustrated at Chapter 2. .
Async Serial Interface Connection
z
Connect RJ45 connector of RS-232C serial console cable to the Console port and
connect the other side of the cable at the serial port of the PC.
Console Port
(RJ45)
RJ45 to DB9
(Rollover Cable)
RS-232C DB9
Serial Port
PC
Figure 3-1: Connect VoiceFinder AP1000 Gateway and Console PC
Ethernet Interface Connection
z
Connect LAN0 port of VoiceFinder AP1000 Gateway and WAN port of the LAN
AddPac Technology Co., Ltd.
42/ 26
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
device with RJ45 UTP cable. Also, connect LAN1 interface with LAN interface of PC.
Figure 3-2: Connect VoiceFinder AP1000 Gateway with WAN and normal PC
AddPac Technology Co., Ltd.
42/ 27
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
PSTN Interface Connection
z
Connect the PSTN line to the PSTN port with RJ11 cable.
Figure 3-3: Connect VoiceFinder AP1000 Gateway and a PSTN line
AddPac Technology Co., Ltd.
42/ 28
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
FXS Voice Interface Connection
z
Connect FXS port and analog phones with RJ11 cables.
Figure 3-4: Connect VoiceFinder AP1000 Gateway and normal telephones
AddPac Technology Co., Ltd.
42/ 29
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Booting
When power is supplied, the system is booted as described below
z
VoiceFinder AP1000 Gateway performs a self-test and checks basic operations of
the CPU, the memory and interfaces.
z
The boot loader is executed, and the boot loader seeks for proper software image
files.
z
The boot loader loads the gateway software from the flash memory.
If the boot loader cannot find proper software image file from the flash memory, the
boot loader stands by in the boot mode until it receives proper software from the
remote system.
(At this time, the boot loader can download software through
TFTP or FTP protocol.)
z
When the software is loaded, the gateway starts to operate according to
configuration information.
However, if there is no configuration information, it
operates according to the default values, and in this case, the operator shall set up
related items for normal operation of the network.
AddPac Technology Co., Ltd.
42/ 30
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Danger
After connecting all the interfaces, supply the power to VoiceFinder AP1000 Gateway.
Supply the power after connecting the adapter to VoiceFinder AP1000 Gateway.
connect the adapter to the power supply before connecting it to the gateway.
110V adapter in case the power supply is 110V.
Do not
Also, use
However, the gateway detects both
110V and 220V, so there is no additional setting required.
AddPac Technology Co., Ltd.
42/ 31
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Use Console terminal with HyperTerminal
z To use a PC as a Console terminal, the communication emulator application should
be installed. When the PC is MS-Windows line, use the HyperTerminal Application.
z
Figure 3-5: MS-Windows Communication Emulator HyperTerminal
AddPac Technology Co., Ltd.
42/ 32
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
z Assign a name to the connection.
“AddPac” is used at the below example.
Figure 3-6: Assign a name for the new connection
AddPac Technology Co., Ltd.
42/ 33
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
z
Select the interface whether the Console cable is connected.
Typically, the
Console cable is connected to the RS-232C 9Pin Serial Port, so select the right
port according to the user environment.
“COM1” is selected at the below example.
Figure 3-7: Select the interface for Console cable
AddPac Technology Co., Ltd.
42/ 34
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
z
Set the port information.
The below examples is based on “COM1” port.
Figure 3-8: COM1 Properties
AddPac Technology Co., Ltd.
42/ 35
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
z After the configuration, press “Enter” button, then the below message will be
displayed on the HyperTerminal. This message shows the routing S/W version,
Gateway H/W test result, memory and etc.
System Boot Loader, Version 1.4.6/MEM
Copyright (c) by AddPac Technology Co., Ltd. Since 1999.
System Bootstrap, Version 1.2
Decompressing the image:
#############################################
#############################################[OK]
VoiceFinder Gateway Series (AP1000)
Serial Number: AP1000-0050f4
32BIT RISC Processor With 33554432 Bytes System Memory
524288 Bytes System Flash Memory
2097152 Bytes 2nd System Flash Memory
1 RS232 Serial Console Interface
2 Ethernet/IEEE 802.3 Interface
AP1000 System software Revision 7.01
Released at Mon Dec 22 22:34:00 2003
Program is 1769316 bytes, checksum is 0xe2dac78
Local Time : Thu Jan 1 00:00:27 1970
Copyright (c) by AddPac Technology Co., Ltd. Since 1999.
Voice Module type (0): FXS
VOIP_INTERFACE_UP : (172.17.202.41)
AddPac Technology Co., Ltd.
42/ 36
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Voice Module Ready
DSP S/W download (0): .... OK
The System is ready. Please login to system.
Gatekeeper shutdowned.
login:
VoIP in service.
Figure 3-9: The HyperTerminal message of VoiceFinder AP1000 Gateway
z With the log-in message, input the user name “root” and the password “router”.
After the log-in process, the prompt “router#” is displayed on the console terminal.
z There are two types of prompts used for VoiceFinder AP1000 Gateway:
“router>”
and “router#”. The “ > ” prompt indicates that the user is not an administrator. With
this prompt, the user is unable to use certain commands: particularly the
configuration commands. The “ # ” prompt indicates that the user is an administrator
(or root), and the user is authorized to use all the functions and commands.
z Log-in as “Admin” allows changing settings. Therefore, it is advised to change the
default password for security purposes.
Refer to Quick Operation Guide & APOS
Operation Guide for password change and detailed configuration.
AddPac Technology Co., Ltd.
42/ 37
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Chapter 4.
Appendix
VoiceFinder AP1000 Gateway Technical Description
This Chapter explains the supported Technical Specification of VoiceFinder AP1000
VoIP Gateway.
(* means that the item is not yet implemented.)
IP Routing Service
IP Routing Protocols
Static
IEEE 802.1Q VLAN Routing
LAN Service
Ethernet Interface
10Mbps Ethernet Interface
Port Configuration
Configuration
Management
Secondary/Subnet Support
MTU Size Change
ARP Entry Revalidate Function
Transmit/Receive Connection Recovery Function
Voice over IP Service
ITU-T H.323 Protocol with ITU-T H.235 Security Feature
VoIP Protocols
Session Initiation Protocol (SIP)
MGCP
G.723.1 MP-MLQ, 6.3Kbps, 5.3Kbps
Voice Compression
G.729.A CS-ACELP, 8Kbps
G.711 PCM, 64Kbps
Voice Activity Detection (VAD)
T.38 Protocol (FAX)
Voice Processing
Dual Tone Multi Frequency (DTMF)
Comfort Noise Generation (CNG)
Echo Cancellation
AddPac Technology Co., Ltd.
42/ 38
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Network Managements
SNMP
Web
Others
Standard SNMP Agent MIB v2
Web Based Management using HTTP Server Interface
Traffic Queuing
Frame-Relay Flow Control
Security Functions
IP Access List
PPP User
Authentication
Standard and Extended IP Access List, IP Packet Filtering
Password Authentication Protocol (PAP)
Challenge Handshake Authentication Protocol (CHAP)
Access Control and Data Protections
Others
Enable/Disable for Specific Protocols
Multi-level User Account Management
Auto-disconnect for Telnet/Console Sessions
Operation and Managements
Console Port
Remote Management
System Performance
Analysis
APOS Management
RS-232C Based Async Serial Interface Support
Console, RlogIn, Telnet
Process, CPU, and Connection Interface
APOS Configuration Back-up and Restore
Remote Upgrade Function using FTP/TFTP
Debugging and System Auditing
Others
Data Logging and Diagnostics
System Booting, Auto-rebooting with Watch-dog Timer
IP Traffic Statistics with Accounting
Other Scalability Features
DHCP
NAT/PAT
Dynamic Host Configuration Protocol (DHCP) Server and
Relay Functions
Network Address Translation (NAT) Protocol
Port Address Translation (PAT) Protocol
IEEE Standard Spanning Tree Bridging Protocol
Bridging
Remote Bridging Support
Concurrent Bridging Support
AddPac Technology Co., Ltd.
42/ 39
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
User Interface
Others
Industry Standard Command Line Interface (CLI)
Network Time Protocol (NTP) Support
Hardware Specification
Microprocessor
32bit RISC Microprocessor
1-Port 10Mbps Ethernet Interface for WAN (RJ45)
Network Interface
1-Port 10Mbps Ethernet Interface for LAN (RJ45)
1-Port Async Serial Interface for RS-232C Console Port
(RJ45)
Voice Interface
4-Port FXS Voice Interface (4 x RJ11)
1-Port PSTN Backup Interface (1 x RJ11)
2MB Flash Memory
Memory
32MB SDRAM / Main Memory
512KB Boot Flash Memory
System LED
LAN, WAN, Power LED (Front Panel)
Power
DC External Power Supply (5V x 4A)
Power Requirement
Operating Temperature
Storage Temperature
Relative Humidity
Cooling Method
Width x Height x Depth
Weight
AddPac Technology Co., Ltd.
10 Watt
0°C ~ 55°C
-40°C ~ 85°C
5% ~ 95%
Internal heat resistance
50 x 210 x 210 (mm)
655g
42/ 40
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
Cable Specification
This Appendix provides information about the Pinout specifications of the following
cables used with VoiceFinder AP1000 Gateway.
z
Console Port Signal and Pinout (RJ-45 to DB9)
z
Ethernet Cable Assemble (RJ-45 to RJ-45) Pinout
[Console Port Signal & Pinout]
In order to connect the gateway console port with the Terminal Emulating PC, the RJ45 to DB9 (Female DTE Connector) cable is used. The transferred signal and Pinout
specifications are enlisted in the following table.
Table 4-1: The transferred signal and Pinout specification
Gateway
Console
Console Device
RJ-45
DB-9
Signal
RJ-45 Pin
DB-9 Pin
Signal
RTS
1
8
CTS
DTR
2
6
DSR
TxD
3
2
RxD
GND
4
5
GND
GND
5
5
GND
RxD
6
3
TxD
DSR
7
4
DTR
CTS
8
7
RTS
(DTE)
AddPac Technology Co., Ltd.
(PC)
42/ 41
VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
[Ethernet Cable Assemble (RJ-45 to RJ-45) Pinout]
In order to connect the gateway with other equipments (i.e. HUB), the RJ-45 to RJ-45
Ethernet Cable is used. The RJ-45 Connector Pin sequence is provided below and the
transferred signal and Pinout specifications are enlisted at the below table.
Figure 4-1: 10Base-T RJ-45 Connector
Table 4-2: Signal and Pinout of Direct Ethernet Cable
RJ-45
Signal
Direction
RJ-45 Pin
1
Tx +
→
1
2
Tx -
→
2
3
Rx +
←
3
4
-
-
4
5
-
-
5
6
Rx -
←
6
7
-
-
7
8
-
-
8
1. These specifications are for serial cables connecting the gateway and the HUB.
2. For gateway to gateway or gateway to PC connection, the Cross Cable must be
used.
AddPac Technology Co., Ltd.
42/ 42