DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` A
mac001
1200DPI 100LPI
HELP LINE Number ; 0870 100 2525
With queries, please quote the page number,
reference number and model number.
HDD/DVD Recorder
DHR-9105P
User Manual
250GB
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 1
mac001
1200DPI 100LPI
Safety Instructions
INTRODUCTION
Please keep the product’s guarantee sheet and receipt in a safe place.
Precautions
• Read this booklet carefully.
• Make sure the rating of your household electricity supply matches that
shown on the back of your product.
• Read this page and chapter ‘Setting up your product’ to help you set up
and adjust your product correctly.
• Do not put the product in a hot or humid place.
• Do not open the product. Get a qualified technician to carry out any
repairs.
• Do not connect the product to the power supply if you have just moved
it from a cold environment to a warm room. This can lead to
condensation inside the product, which can damage it. Wait for approx.
2 hrs for it to reach room temperature.
• Make sure the product is placed at least 10 cm apart from other home
appliances or obstacles to ensure sufficient ventilation.
• The product should not be exposed to dripping or splashing and no
objects filled with liquids, such as vases should be placed on top of the
product.
• Before a storm and/or lightning, unplug the product from the mains
supply and aerial.
• Put the product on a steady flat surface.
• Only clean the product with a soft, lint-free cloth. Do not use harsh or
alcohol- based cleaning agents.
For your own Safety
• There are no components in this product you can service or repair
yourself.
• Do not open the case of the product. Only allow a qualified engineer to
repair or service your product.
• This product is designed to work continuously. Switching it off (stand-by
mode) does not disconnect it from the mains. To disconnect it from the
mains you have to unplug it.
1
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 2
mac001
1200DPI 100LPI
Important Safeguards
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
‘dangerous voltage‘ within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and servicing
instructions in the literature accompanying the
appliance.
IMPORTANT FOR LASER PRODUCTS
LASER
This Digital Video Disc Player employs
a Laser System. To ensure proper use
of this product please read this
owner’s manual carefully and retain for
future reference. Should the unit
require maintenance, contact an
authorized service location - see
service procedure.
Use of control adjustments or the
performance of procedures other than
those specified may result in
hazardous radiation exposure.
To prevent direct exposure to the laser
beam, do not try to open the enclosure.
Visible laser radiation when open and
interlocks defeated.
DO NOT STARE INTO THE BEAM.
DANGER Visible laser radiation when open and
interlock failed or defeated.
Avoid direct exposure to beam.
CLASS 1
LASER PRODUCT
WARNING TO REDUCE THE RISK OF FIRE OR
CAUTION
CAUTION
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
Any changes or modification in
construction of this device which
are not expressly approved by the
party responsible for compliance
could void the user’s authority to
operate the equipment.
2
Downloaded From Disc-Player.com Daewoo Manuals
CAUTION Do not open the top cover. There are
no user serviceable parts inside the
Unit; leave all servicing to qualified
service personnel.
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 3
mac001
1200DPI 100LPI
Important Safeguards
1
READ INSTRUCTIONS
All the safety and operating instructions should
be read before the unit is operated.
2
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
3
HEED WARNINGS
All warnings on the unit and in the operating
instructions should be adhered to.
4
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5
CLEANING
Unplug this unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6
ATTACHMENTS
Do not use attachments unless recommended by
the unit’s manufacturer as they may cause
hazards.
7
WATER AND MOISTURE
Do not use this unit near water- for example, near
a bath tub, wash bowl, kitchen sink or laundry
tub, in a wet basement, or near a swimming pool.
8
ACCESSORIES
Do not place this unit on an unstable cart, stand,
tripod, bracket, or table. The unit may fall,
causing serious injury to a child or adult as well
as serious damage to the unit. Use this unit only
with a cart, stand , tripod, bracket, or table
recommended by the manufacturer.
8A A unit and cart combination
should be moved with care.
Quick stops, excessive force,
and uneven surfaces may
cause the product and cart
combination to overturn.
9
PORTABLE CART WARNING
(symbol provided by RETAC)
VENTILATION
Slots and openings in the case are provided for
ventilation to ensure reliable operation of the unit
and to protect it from overheating. These
openings must not be blocked or covered. These
openings must not be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This
unit should never be placed near or over a
radiator or heat radiator. This unit should not be
placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have
been adhered to.
10 POWER SOURCES
This unit should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of power supply to
your home, consult your dealer or local power
company. For units intended to operate from
battery power, or other sources, refer to the
operating instructions.
11 POWER-CORD PROTECTION
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, mains sockets, and
the point where they exit from the unit.
12 LIGHTNING
For added protection for this unit during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the
unit due to lightning and power line surges.
13 DISC TRAY
Keep your fingers well clear of the disc as it is
closing. It may cause serious personal injury.
14 OVERLOADING
Do not overload wall outlets of extension cords
as this can result in a risk of fire or electric shock.
15 OBJECT AND LIQUID ENTRY
Never push objects of any kind into this unit
through openings as they may touch dangerous
voltage points or ‘short-out’ parts that could
result in a fire or electric shock. Never spill liquid
of any kind on the unit.
16 BURDEN
Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the
3
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
This set has been designed and manufactured to
assure personal safety. Improper use can result in
electric shock or fire hazard. The safeguards
incorporated in this unit will protect you if you
observe the following procedures for installation, use
and servicing. This unit is fully transistorized and does
not contain any parts that can be repaired by the user.
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 4
mac001
1200DPI 100LPI
Important Safeguards
product.
17 DISC
Do not use a cracked, deformed or repaired
disc. These discs are easily broken and may
cause serious personal injury and product
malfunction.
18 SERVICING
Do not attempt to service this unit yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19 DAMAGE REQUIRING SERVICE
A.
B.
C.
D.
E.
F.
Unplug this unit from the wall outlet and refer
servicing to qualified service personnel under
the following conditions.
When the power-supply cord or plug is
damaged.
If liquid has been spilled, or objects have fallen
into the unit.
If the unit has been exposed to rain or water.
If the unit does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions. Improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the unit to its normal operation.
If the unit has been dropped or the cabinet has
been damaged.
When the unit exhibits a distinct change in
performance-this indicates a need for service.
20 REPLACEMENT PARTS
When replacement parts are required, have the
service technician verify that the replacements
he uses have the same safety characteristics as
the original parts. Use of replacements
specified by the unit manufacturer can prevent
fire, electric shock, or other hazards.
21 SAFETY CHECK
Upon completion of any service or repairs to
this unit, ask the service technician to perform
safety checks recommended by the
manufacturer to determine that the unit is in
safe operating condition.
22 WALL OR CEILING MOUNTING
The product should be mounted to a wall or
ceiling only as recommended by the
manufacturer.
4
Downloaded From Disc-Player.com Daewoo Manuals
23 HEAT
The product should be situated away from heat
sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
24 To prevent battery electrolyte leakage, which
may result in injury and damage to the unit or
other objects, observe the following
precautions;
A. All batteries must be installed with the proper
polarity.
B. Do not mix new with old or used batteries.
C. Only use batteries of the same type and brand.
D. Remove the batteries when they are not to be
used for a long period time.
E. When the batteries have become discharged,
they must be disposed of in a safe manner
which complies with all applicable laws.
25 WEEE (Waste of electrical and electronic
equipment)
The meaning of the symbol on
the product, its accessory or
packaging indicates that this
product shall not be treated as
household waste. Please,
dispose of this equipment at
your applicable collection
point for the recycling of
electrical & electronic equipments waste. In the
European Union and Other European countries
which there are separate collection systems for
used electrical and electronic product. By
ensuring the correct disposal of this product,
you will help prevent potential hazards to the
environment and to human health, which could
otherwise be caused by unsuitable waste
handling of this product. The recycling of
materials will help conserve natural resources.
Please do not therefore dispose of your old
electrical and electronic equipment with your
household waste. For more detailed information
about recycling of this product, please contact
your local city office, your household waste
disposal service or the shop where you
purchased the product.
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 5
mac001
1200DPI 100LPI
Table of Contents
Recording
Safety Instructions ____________________________1
Important Safeguards _________________________2
Table of Contents ______________________________5
Overview ______________________________________6
Identification of Controls ______________________10
Basic Recording________________________________41
Connections
Connecting Antenna/Cable ____________________15
Connecting a TV _______________________________15
Connecting an Amplifier/Receiver _____________16
Connecting Optional Equipment ______________17
Connecting a Digital Camcorder ______________17
Recording to DVD or HDD
One Touch Record (OTR)
To Pause the Recording
Playing under recording
41
41
42
42
Timer Recording _______________________________42
Timer Recording using Manual Set
Record Screen
Timer Recording using VideoPlus
system
Canceling a Timer Recording
Stopping a Timer Recording in
Progress
Timer Recording Troubleshooting
42
43
44
44
44
Recording from an External Input _____________45
Dubbing _______________________________________46
Media files Copying ___________________________47
Setup
Initial Installation ______________________________18
Setup menu____________________________________19
Setup Menu Overview
Menu Navigation
INSTALLATION Settings
RECORDING OPTIONS Settings
LANGUAGE Settings
PREFERENCES / Video Settings
PREFERENCES / Audio Settings
PREFERENCES / Parental Controls
PREFERENCES / Auto Settings
PREFERENCES / Hard Disk
System Information
Restore Defaults
19
19
19
22
23
24
25
26
28
29
31
31
On-Screen Display Overview __________________32
Editing
HDD Playback and Editing ____________________49
Playing a HDD title
Deleting a HDD title
Editing a HDD title
Sorting a HDD title
Dubbing a HDD title to DVD disc
49
49
50
52
52
Disc Manager __________________________________53
Disc Editing in DVD±RW disc
Disc Editing in DVD±R, DVD-RW disc
Title Editing
Advanced Disc Editing
53
55
56
57
Playback
Reference
DVD Playback _________________________________34
Playing a Picture, Music or DivX files _________36
Time shifting & Saving ________________________39
Troubleshooting _______________________________59
Technical Specifications ________________________61
Time shifting in HDD mode
Saving to HDD
39
40
5
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
Introduction
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 6
mac001
1200DPI 100LPI
Overview
Overview
Which discs you can use
Time Shifting
The following discs can be used in your HDD/DVD
Recorder:
: Simultaneous video recording and playback
• Pause and resume the live TV broadcast. Issue
trick mode commands like fast forward, fast
rewind, jump and instant replay
• Play a previously recorded program while
another program is being simultaneously
recorded
Program Recording
Playback and recording
DVD+RW (Digital Versatile Disc + ReWritable)
DVD+R (Digital Versatile Disc + Write-Once)
DVD-R (DVD-Recordable) / DVD-RW (DVDRewritable): Recording with +VR Format (Dual
media support).
: Recording from TV tuner or analog AV input
• Full support for VideoPlus technologies - simply
enter the program code number (published in
newspapers or on the internet) to setup timer
recording
• Manually set up timer recording for a TV
program or a recurring TV program
These discs can only be played back in other DVD
players or recorders if the recording was made in
‘Video mode‘ and the recording was finalised.
Personal video copying by external input
CD-R (CD recordable) Audio, MP3 and DivX files
• Analog and DV camcorder tapes
• VCR tapes
High-speed dubbing
• Select program(s) from HDD and copy them to
DVD
Also copy from DVD to HDD (Available with
+VR Format, JPEG, MP3, DivX)
• Watch a TV program while high-speed dubbing
is in progress
Simple, easy video editing
• Rename programs, Delete programs, Split
programs, Segment programs
• Identify and keep the desired video and remove
the parts you do not need.
Playback only
DVD Video (Digital Versatile Disc)
Audio CD (Compact Disc Digital Audio)
CD-RW (CD rewritable) Audio, MP3 and DivX files
VCD, SVCD
Not all recordable CDs may be played by your
player.
About Symbols
About the
Symbol
‘ ‘ may appear on the TV screen during operation.
This icon means the function explained in this
User's Guide is not available on that specific disc.
DVD Playback
DVD, DivX, VCD, SVCD, MPEG file video,
MPEG-1 Layer 2, MP3, CD stereo audio, Dolby
Digital& DTS digital audio output.
Regional code
If the region number on your DVD disc does not
correspond to the region number of this player, the
disc cannot be played.
2
6
Downloaded From Disc-Player.com Daewoo Manuals
ALL
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 7
mac001
1200DPI 100LPI
Overview
DVD, DVD+R, DVD+RW?
Supporting Disc
±RW / ±R
Recording Format
±Disc + VR format
Finalize
-RW, -R, +R
After finalising other DVD playback
What is a DVD?
All discs can playback
Consumer
Does not need selection
(recording format)
Remark :
A DVD Recorder that supports ‘dual media’
recording allows DVD+RW format recording (+VR)
on either DVD-R, DVD-RW, DVD+R or DVD+RW
media. Any editing feature that is available with the
+RW logical format is available on any of the media
types. This system allows the flexibility for the
consumer to use any of the above media formats for
recording in the same system. Since the +VR format
is DVD-Video compatible, the consumer can take
any disk recorded on this platform and should be
capable of playing it back on the majority of DVD
players on the market.
DVD (Digital Versatile Disc) is a storage medium
that combines the convenience of the compact disc
with the latest digital video technology. DVD video
uses modern MPEG2 data compression technology
that enables an entire feature film to be stored on a
single five inch disc.
How good is the resolution of DVD compared with
VHS?
The razor-sharp digital images have more than 500
lines of resolution at 720 pixels per line. This is
more than twice as high as VHS and even better
than laser disc quality. DVD picture quality is easily
comparable to the digital masters produced in
recording studios.
What is a DVD+RW?
DVD+ReWritable uses ‘phase change‘ media, the
same technology on which rewritable CDs are
based. A high-performance laser is used to change
the reflective properties of the recording layer; this
process can be repeated more than a thousand
times.
What is a DVD+R?
Disc-related Terms
Title (DVD only)
The main film, accompanying feature content, or
music album. Each title is assigned a title reference
number enabling you to locate it easily.
Chapter (DVD only)
Sections of a movie or a musical piece that are
smaller than titles. A title is composed of one or
several chapters. Each chapter is assigned a
number to enable you to easily locate the chapter
you want. Depending on the disc, chapters may not
be labeled.
Track (Audio CD only)
Sections of a movie or a musical piece on an audio
CD. Each track is assigned a number, enabling you
to easily locate the track you want.
Unlike a DVD+RW disc, a DVD+R (write-once DVD)
can only be written to once. If it is not finalised
after a recording, further recordings can be added to
it. Old recordings can be deleted but they can no
longer be overwritten. The deleted recordings
(titles) are marked 'deleted title'.
Before a DVD+R can be played in a DVD player, it
must be finalised in the HDD/DVD Recorder. Once
this process is complete, no further recordings can
be added.
What can I do with my HDD/DVD Recorder?
Your HDD/DVD Recorder is a machine for recording
and playing back digital video discs with ‘two-way‘
compatibility with the universal DVD video
standard. This means:
• existing DVD video discs can be played on the
recorder.
• recordings made on your HDD/DVD Recorder
can be played on other DVD video players and
DVD-ROM drives.
7
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
Dual Media
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 8
mac001
1200DPI 100LPI
Overview
What is DV?
Using DV, also known as i.LINK, you can connect a
DV-equipped camcorder to the HDD/DVD Recorder
using a single DV cable for input and output of
audio, video, data and control signals.
The i.LINK interface is also known as IEEE 13941995.
‘i.LINK’ and the ‘i.LINK’ logo are trademarks.
• The HDD/DVD Recorder is only compatible with
DV-format (DVC-SD) camcorders. Digital
satellite tuners and Digital VHS video recorders
are not compatible.
• You cannot connect more than one DV
camcorder at a time to the HDD/DVD Recorder.
• It may not always be possible to control the
connected camcorder via the DV IN jack.
• Audio input to the DV IN jack should be 32 or
48kHz (not 44.1kHz).
• Picture disturbance on the recording may occur
if the source component pauses playback or
plays an unrecorded section of tape, or if the
power fails in the source component, or if the
DV cable becomes disconnected.
About DVD Recording
Notes on Recording
• The recording times shown are not exact
because the HDD/DVD Recorder uses variable
bit-rate video compression. This means that the
exact recording time will depend on the
material being recorded.
• When recording a TV broadcast, if the
reception is poor or the picture contains
interference, the recording times may be
shorter.
• Discs recorded at high speeds (equal to or
greater than 2X) may not be recognized.
• If you record still pictures or audio only, the
recording time may be longer.
• The displayed times for recording and time
remaining may not always add up to the exact
length of the disc.
• The available recording time may decrease if
you heavily edit a disc.
• When using a DVD+R disc, you can keep
recording until the disc is full, or until you
8
Downloaded From Disc-Player.com Daewoo Manuals
finalise the disc. Before you start a recording
session, check the amount of recording time
left on the disc.
Recording TV Audio Channels
The HDD/DVD Recorder can record one or two
channel audio. For TV broadcasts, this usually
means mono or stereo, but some programs are
broadcast in bilingual audio channel. You can
record either BIL I, BIL II or both.
Restrictions on Video Recording
• You cannot record copy-protected video using
this HDD/DVD Recorder. Copy-protected video
includes DVD-Video discs and some satellite
broadcasts. If copy-protected material is
encountered during a recording, recording will
pause or stop automatically and an error
message will be displayed on-screen.
• Video that is ‘copy-once only’ can only be
recorded using DVD+RW discs with CPRM.
Copyright Notice
• Audio and video recordings you make using the
HDD/DVD Recorder are for your personal use
only. You may not sell, lend, or rent them to
other people.
• This product incorporates copyright protection
technology that is protected by method claims
of certain U.S.patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision corporation. Reverse engineering
or disassembly is prohibited.
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 9
mac001
1200DPI 100LPI
Overview
Caution
Do not mix old and new batteries. Never mix
different types of batteries (standard, alkaline, etc.).
Handling the Unit
When shipping the unit
The original shipping carton and packing
materials come in handy. For maximum
protection, re-pack the unit as it was originally
packaged at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or
radio may be distorted during playback. In this
case, position the unit away from the TV, VCR,
or radio, or turn off the unit after removing the
disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide
spray, near the unit. Do not leave rubber or
plastic products in contact with the unit for a
long period of time. They will leave marks on
the surface.
Cleaning the Unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are
extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do
not use strong solvents such as alcohol,
benzine, or thinners, as these might damage
the surface of the unit.
To obtain a clear picture
The HDD/DVD Recorder is a high-tech,
precision device. If the optical pick-up lens and
disc drive parts are dirty or worn, the picture
quality will be poor. Regular inspection and
maintenance are recommended after every
1,000 hours of use. (This depends on the
operating environment.) For details, please
contact your nearest dealer.
Remote Control Operation Range
Point the remote control at the remote sensor and
press the buttons.
Distance: Within 23 ft (7 m) of the remote sensor.
Angle: Within 30° in each direction of the remote
sensor.
Remote Control Battery Installation
Detach the battery cover on
the rear of the remote control,
and insert two AAA batteries.
Make sure the polarities (+ and
-) are aligned correctly.
Notes on Discs
Handling Discs
Do not touch the
playback side of the
disc. Hold the disc by
the edges so that
fingerprints will not get on the surface. Do not stick
paper or tape on the disc.
Storing Discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources
of heat, or leave it in a parked car exposed to direct
sunlight, as there may be a considerable
temperature increase inside the car, which could
distort the disc.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc
from the centre outward.
Do not use strong solvents such as alcohol, benzine,
thinners, commercially available cleaners, or antistatic spray
intended for
older vinyl
Yes
No
records.
Note on HDD
•
•
•
•
Do not move the recorder immediately after
switching it off. Wait at least 2minutes after
power-off.
If the HDD/DVD Recorder is used improperly or
in an unsuitable environment, it is possible that
the HDD will fail.
Power failure may cause data loss on the HDD.
We recommend that you back up your
important data to DVD discs in order to protect
against accidental loss or possible HDD failure.
9
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
Precautions
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 10
mac001
1200DPI 100LPI
Identification of Controls
Front Panel
$
!
@
( ) 1
! Disc Tray (DVD deck)
Insert a disc here.
@ Front Panel Display
Shows the current status of the HDD/DVD
Recorder.
# OPEN/CLOSE (DVD)
Opens or closes the disc tray.
$ PLAY/PAUSE (ENTER)
Starts playback of a disc or HDD. Pauses
playback or recording temporarily.
% STOP
Stops playback.
^ PREV/REW
Skips to previous chapter. Searches backward.
& NEXT/FF
Skips to next chapter. Searches forward.
* STANDBY/ON
Turns the HDD/DVD Recorder on and off.
( REC
Starts recording. Press repeatedly to set the
recording time.
) SELECT DVD/HDD
Toggles control between the DVD mode and
the HDD mode.
1 MENU
Accesses media browser or return to previous
menu.
2 PR+/– (…/†)
Scans up or down through memorized channels.
Also moves up and down in menus.
10
Downloaded From Disc-Player.com Daewoo Manuals
#
2
%
^
*
&
3 4 5
3 DV Input
Connects to the DV output of an external
source (VCR, Camcorder, etc.).
4 AVF Input (VIDEO, L-AUDIO-R)
Connects to the audio/video output of an
external source (VCR, Camcorder, etc.).
5 S-VIDEO Input
Connects to the S-Video output of an external
source (VCR, Camcorder, etc.).
• HDD capacity is displayed in front panel or
Setup-Preferences-Hard Disk.
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 11
mac001
1200DPI 100LPI
Identification of Controls
INTRODUCTION
Front Panel Display
DVD MODE
HDD MODE
HDD/DVD Recorder is
recording.
Disc is loaded
HDD Timer Recording is set
DVD Timer Recording is set
FRONT DISPLAY MESSAGE:Indicates
clock,channel,current mode,OTR
time,etc.
Channel
PR23
Recording on HDD
TV Channel
Input mode
11:15
Indicates a Timer recording on HDD
is set.
11:15
Indicates a Timer Recording on HDD
is in standby mode.
Au-1
AV1 input
11:15
Indicates the HDD is recording.
DV
DV input
0:30
OTR Recording mode
Recording on disc
11:15
Indicates a DVD Timer recording is
set.
Indicates a DVD Timer Recording is
in standby mode.
11:15
Indicates the DVD is recording.
0:30
OTR Recording mode
RECP
Recording Pause mode
11:15
Others
SAFE
Indicates when the HDD/DVD
Recorder is locked. The front panel
is locked by pressing and holding
the [√] button over 5 seconds on
the remote control and is unlocked
by pressing any key on the remote
control.
TV
Indicates the HDD/DVD Recorder is
in TV mode (set by [TV/DHR]
button).
I-S
Indicates when the HDD/DVD
Recorder is outputting the video
signal in Interlaced Scan mode.
P-S
Indicates when the HDD/DVD
Recorder is outputting the video
signal in Progressive Scan mode.
NO
No disc or unreadable disc
11
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 12
mac001
1200DPI 100LPI
Identification of Controls
Remote Control
- Turns the HDD/DVD Recorder on and off.
- Locks the front panel by pressing and holding it over 5 seconds.
Opens and closes the disc tray.
Selects DVD mode.
HDD
DV
INPUT
Selects HDD mode.
Selects DV Input mode.
Switches the HDD/DVD Recorder input to RF (Tuner), AV1, AV2, AVF or SVIDEO.
- Selects numbered options in menus.
- Selects TV channels.
Clears previous setting of timer-recording or file name.
Adds the title in Dubbing or Copying menu.
Accesses media browser (or title menu) or return to previous menu.
Displays or exits the main setup menu.
Displays the edit menu for DVD or HDD.
Displays information about the currently loaded disc, HDD or TV channel.
- œ √…† : Selects menu options.
- PR +/– : Selects channels.
Confirms menu selections.
- Starts playback.
- Pauses playback or recording temporarily. Press again to exit Pause mode.
Skips to the next or previous chapter/track.
Searches backward/forward.
Increases or decreases the slow motion speed when playing a DVD or HDD.
Stops playback or recording.
12
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 13
mac001
1200DPI 100LPI
Identification of Controls
INTRODUCTION
Starts recording. Press repeatedly to set the recording time. For more
details, Refer to One Touch Record (OTR) on page 41.
DUB
Displays the Dubbing or Copy menu.
Selects Recording mode. (Approx.)
[DVD] HQ (1 hr), SP (2 hrs), EP (4 hrs), SLP (6 hrs)
[HDD] HQ (51 hrs), SP (105 hrs), EP (204 hrs), SLP (310 hrs)
Displays the Timer Recording menu and VideoPlus menu.
Selects a subtitle language, if available.
Selects an audio language (DVD), audio channel (CD) or audio type (TV).
Enlarges the video image.
Repeats the current chapter, track, title or the entire disc.
Repeats playback between two points (A and B).
Searches for a specific title or a chapter.
TV/DHR
TITLE/PBC
P.SCAN
Switches between the HDD/DVD Recorder tuner and your TV tuner.
Displays a disc’s Title menu, if available.
Press and hold for 5 seconds to switch between Progressive Scan and
Interlace Scan mode.
Progressive Scan Mode
• If your TV supports Progressive Scan, you can view high quality video by setting the
HDD/DVD Recorder to Progressive Scan mode. If your TV does not support
Progressive Scan, do NOT change to Progressive Scan mode.
If you do so accidentally, press and hold the [P.SCAN] button for 5 seconds to
restore normal viewing.
• When video output mode is changed from RGB to Interlace or Progressive (Scart 1)
will not be correct colour for Component video.
• As component outputs have their own Jacks on the back side, change the TV input
into Component input, after connecting the component cables from the HDD/DVD
Recorder to the TV.
• Changing from Interlace or Progressive to RGB, should be the opposite of above.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS
ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN THE CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY 'WITH THIS MODEL 525p
DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE.
13
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 14
mac001
1200DPI 100LPI
Identification of Controls
Rear panel
!
@
#
&
$
%
*
(
! S-VIDEO OUT
Connect to a TV with an S-Video Input.
@ AUDIO OUT (L, R)
Connect to a TV or other equipment with audio
inputs.
# COMPONENT VIDEO OUT (Y Pb Pr)
Connect to a TV with Component Video (Y Pb
Pr) inputs.
$ Scart socket 2
Connection of an additional device (satellite
receiver, set-top box, video recorder,
camcorder, etc.)
% ANT IN
Connect to your antenna or cable TV outlet.
14
Downloaded From Disc-Player.com Daewoo Manuals
^
)
^ AC Power Cord
Plug into a power outlet.
& COAXIAL/OPTICAL (Digital Audio Out)
Connect to an amplifier with a coaxial (or
optical) digital audio input.
* Scart socket 1
Connection of a TV set. Composite-output and
RGB-output
( ANT OUT
Connect to a TV with an RF input.
) Cooling Fan
Caution
• Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause
permanent damage to the HDD/DVD Recorder.
DG-M32D1P-2A(GB)
2006.5.16 4:39 PM
˘
` 15
mac001
1200DPI 100LPI
Connections
Connecting a TV
Choose one of the following TV connections,
depending on the capabilities of your equipment.
Rear of TV
S-VIDEO
INPUT
Pr
S
ANTENNA
INPUT
COMPONENT/PROGRESSIVE VIDEO INPUT
Pb
C
Y
V
R
Connecting Antenna/Cable
1
Disconnect the antenna/cable from the rear of
your TV.
2
Connect this cable to the jack marked ANT IN
(FROM ANT.) on the rear panel of the HDD/DVD
Recorder.
Antenna
Antenna
Cable TV
Wall Jack
Flat Wire
(300ohm)
300/75ohm Adapter
(Not supplied)
OR
OR
Rear of HDD/DVD Recorder
RF Connection
Connect the ANT OUT (TO TV) jack on the HDD/DVD
Recorder to the antenna in jack on your TV using the
supplied 75-ohm RF cable (R).
This set doesn’t have a modulator output. However
it still applies the RF through Output.
Scart Connection
1 Plug a scart cable into the scart socket EURO
AV1 at the back of the HDD/DVD Recorder and
the corresponding scart socket at the back of
the TV set. (V)
2
Rear of HDD/DVD Recorder
Plug a scart cable into the blue scart socket
EURO AV2/DECODER at the back of the
HDD/DVD Recorder and the corresponding
scart socket at the back of the Decoder.
15
Downloaded From Disc-Player.com Daewoo Manuals
CONNECTIONS
Caution
• Make sure the HDD/DVD Recorder is
connected directly to the TV, and the TV is set
to the correct video input.
• Do not connect the HDD/DVD Recorder’s
AUDIO OUT jack to the phone in jack (record
deck) of your audio system.
• Do not connect the HDD/DVD Recorder via
your VCR. The DVD image could be distorted
by the copy protection system.
If your cable wire is connected to your TV without a
converter or descrambler box, unscrew the wire
from your TV and attach it to the RF IN (FROM ANT.)
jack on the rear panel of the HDD/DVD Recorder.
Use the supplied RF cable to connect between the
HDD/DVD Recorder’s OUT (TO TV) jack and the
antenna input jack on your TV. With this connection,
you can receive all midband, superband, and
hyperband channels (all cable channels).
INTRODUCTION
• There are a variety of ways to connect the
HDD/DVD Recorder to your TV and other
equipment. Use only one of the connections
described below. Whichever TV connection
you use will work with all input sources.
• Please refer to the manuals for your TV, VCR,
stereo system, or other devices as necessary to
make the best connections.
• For better sound reproduction, connect the
HDD/DVD Recorder’s AUDIO OUT jacks to the
audio in jacks of your amplifier, receiver,
stereo, or audio/video equipment. See
‘Connecting an Amplifier/Receiver‘ on page 16.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 16
mac001
1200DPI 100LPI
Connections
S-Video Connection
1 Connect the S-VIDEO OUT jack on the
1
Connect the HDD/DVD Recorder’s DIGITAL
AUDIO OUT jack (Coaxial or Optical) to the
corresponding in jack on your amplifier. Use an
optional digital coaxial (or optical) audio cable.
(X)
2
You will need to activate the HDD/DVD
Recorder’s digital output; see ‘Audio’ Settings
on page 25.
HDD/DVD Recorder to the S-Video in jack on
your TV using an S-Video cable (S).
2
Connect the Left and Right AUDIO OUT jacks
from the HDD/DVD Recorder to the left/right
audio in jacks on your TV using the audio
cables.
Component Video Connection
• If your television is a high-definition or ‘digital
ready‘ television, you may take advantage of
the HDD/DVD Recorder’s Progressive Scan
output for the highest video resolution possible.
• If your TV does not accept the Progressive Scan
format, the picture will appear scrambled.
1
Connect the COMPONENT VIDEO OUT jacks on
the HDD/DVD Recorder to the corresponding in
jacks on your TV using a Y Pb Pr cable (C) if the
component (Y, Pb, Pr) is available on your TV.
2
Connect the Left and Right AUDIO OUT jacks
from the HDD/DVD Recorder to the left/right
audio in jacks on your TV using the audio
cables.
• Be sure to set the HDD/DVD Recorder to
Progressive Scan mode by pressing and
holding [P.SCAN] for 5 seconds (or changing
the ‘Video Output’ in the Setup Menu; see
page 24).
• Progressive Scan does not work with the RF,
Audio/Video or S-Video connections.
Connecting an Amplifier/Receiver
Digital Multi-Channel Sound?
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
audio/video receiver that supports one or more of
the audio formats provided by your HDD/DVD
Recorder (MPEG 2, Dolby Digital, and DTS). Check
the receiver manual and the logos on the front of
the receiver.
• Due to the DTS Licensing agreement, the
digital output will be in DTS digital out when
the DTS audio stream is selected.
• If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
• 5.1 channel digital surround sound via the
digital connection can only be obtained if your
receiver is equipped with a digital multichannel decoder.
• To see the audio format of the current DVD on
the on-screen display, press [AUDIO].
The HDD/DVD Recorder does not perform internal
(2- channel) decoding of DTS sound tracks. To enjoy
DTS multi-channel surround, you must connect the
HDD/DVD Recorder to a DTS compatible receiver
via one of the HDD/DVD Recorder’s digital audio
outputs.
Rear of HDD/DVD Recorder
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
HDD/DVD Recorder to the left and right audio in
jacks on your amplifier, receiver, or stereo system,
using the supplied audio cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/Video
receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
16
Downloaded From Disc-Player.com Daewoo Manuals
X
A
OPTICAL
COAXIAL
DIGITAL INPUT
DIGITAL INPUT
L
R
AUDIO INPUT
Amplifier (Receiver)
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 17
mac001
1200DPI 100LPI
Connections
Connecting a Digital Camcorder
To receive audio/video signals from other
equipment, connect the AVF (Audio/Video Front)
jacks on the HDD/DVD Recorder to the audio/video
out jacks on your external component, using
optional audio/video cables.
Using the front panel DV IN jack, it is possible to
connect a DV digital camcorder, video deck or
DVD+R/RW recorder and digitally transfer DV tapes
or DVD+R/RW discs to DVD±R, DVD±RW or HDD in
HDD/DVD Recorder.
Use a DV cable (not supplied) to connect the DV
In/Out jack of your DV camcorder/video deck to the
front panel DV IN jack of the HDD/DVD Recorder.
Jack Panel of Accessory Component
(VCR, Analog Camcorder, etc.)
This jack is for connection to DV equipment only. It
is not compatible with digital satellite tuners or DVHS video decks.
DV Digital Camcorder
DV
IN/OUT
Front of HDD/DVD Recorder
DV IN
Front of HDD/DVD Recorder
17
Downloaded From Disc-Player.com Daewoo Manuals
CONNECTIONS
Connecting Optional Equipment
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 18
mac001
1200DPI 100LPI
Initial Installation
After successfully connecting your HDD/DVD
Recorder to your TV and other devices, this chapter
will show you how to complete the initial
installation.
You must follow the initial installation process to
set the time, date, channels, and language
preferences for the HDD/DVD Recorder.
1
A ‘Welcome‘ message is displayed on the
screen. Make sure the RF cable from your
antenna or cable TV jack is connected. Press
[ENTER] to begin initial installation.
2
Select the desired language for the on-screen
menu using […/†]. Press [ENTER] to confirm.
3
Select the desired country using […/†]. Press
[ENTER] to confirm.
4
Select the desired disc menu language using
[…/†]. Press [ENTER] to confirm.
5
Select the desired disc playback audio
language using […/†]. Press [ENTER] to
confirm.
6
Select the desired disc playback subtitle
language using […/†]. Press [ENTER] to
confirm.
Installation
7
The HDD/DVD Recorder detects channels
automatically and stores them in memory.
8
After finishing Auto Channel Search, set the
clock.
9
Use [œ/√] to move left/right and use […/†]
to change the settings.
10
After setting the clock, press [ENTER] to
confirm. If you cancel the process during Initial
Installation, you should repeat this procedure.
Re-Installation
This set is equipped with the multi-tuner for
receiving many countries' broadcasting. In order to
receive broadcasting of different countries, follow
as below.
1 Press [SETUP] and select the 'Restore
Defaults' using [œ /√]. Then, RESET the set.
(see page 31)
2 Power On, then you see the 'Initial
Installation'.
3 Select the country which you want to (see
step 3), then repeat the steps 4~10.
Installation
Installation
Instructions:
Please select your language to begin auto
install procedure:
English
Spanish
French
Danish
Catalan
German
Icelandic
Instructions:
Please select your country of use:
UK & Ireland
Switzerland
Belgium
Denmark
Finland
France
Germany
Greece
Instructions:
Setup-Exit
Enter-Confirm Setup-Exit Move …†
Welcome.
Press [Enter] to begin auto channel search.
Ensure aerial is connected.
Installation
Please select disc menu language:
Default
Installation
English
Spanish
Please select disc audio language:
French
Default
Czech
Installation
English
Danish
Spanish
Please select disc subtitle language:
German
French
Default
Czech
English
Instructions:
Danish
Spanish Setup-Exit Move …†
Enter-Confirm
German
French
Czech
Instructions:
Danish
Enter-Confirm
Setup-Exit Move …†
German
18
Downloaded From Disc-Player.com Daewoo Manuals
Installation
Searching for available TV stations:
2 channels found
Please wait...
Instructions:
Setup-Exit
Enter-Confirm Setup-Exit Move …†
Set Clock
Please set the clock:
…
Time : 13 : 00
†
Date : 02 \ Jan \ 2010 (Sat)
Instructions:
Enter-Confirm Setup-Exit Move …†
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 19
mac001
1200DPI 100LPI
Setup menu
Setup Menu Overview
The HDD/DVD Recorder Setup menu includes six
categories, including: Installation, Recording
Options, Languages, Preferences, System Info, and
Restore Defaults. Press [SETUP] and [œ/√] on the
remote control to view the first and second levels of
the Setup menu.
4
Press [ENTER]. The ‘Manual Setup’ menu
appears.
5
Use […/†] to select ‘Standard‘. Press [ENTER]
to move to the second level.
6
Use […/†] to select the desired ‘Standard’
(PAL-BG, PAL-II, PAL-DK, or SECAM-L), then
press [ENTER].
Menu Navigation
Press [SETUP]. The Setup menu appears.
4
5
Press [ENTER] to move to the third level.
Use [œ/√] to select the desired category.
While the desired category is selected, press
[…/†] to move to the second level.
Press [SETUP] to exit the Setup menu.
INSTALLATION Settings
Manual Set
To complete the set-up of your HDD/DVD Recorder
when the auto set has not stored all of the channels
or when you wish to store a new channel.
1
2
3
Press [SETUP]. The Setup menu appears.
Use [œ/√] to select ‘Installation‘.
While ‘Installation‘ is selected, press [†] to
select ‘Manual Set‘.
PAL-BG
Select The
Aerial
standard.
CH-02
PAL-BG
PAL-II
Off
PR-01
PAL-DK
P-01
SECAM-L
Enter-Confirm Setup-Exit Move …†
Use […/†] to select the desired setting, then
press [ENTER] to confirm your selection.
Some items require additional steps. Press
[SETUP] at any time to return to the previous
menu.
6
Standard
Reception
Auto Search
Fine Tune
Decoder
Store Channel
Program Name
Instructions:
SETUP
1
2
3
Manual Setup
This set is equipped with the Multi-Tuner. You can
search broadcasting of other countries. If the set
can not search the channels, please Re-Install. (see
page 18.)
7
Use […/†] to select ‘Reception‘. Press
[ENTER] to move to the second level.
8
Use […/†] to select the desired broadcast
system (Aerial or Cable), then press [ENTER].
Aerial: If you are using a standard antenna to
receive channels.
Cable: If you are using basic cable to receive
channels.
Manual Setup
Standard
Reception
Auto Search
Fine Tune
Decoder
Store Channel
Program Name
Instructions:
PAL-BG
Aerial
Select The
CH-02
Reception.
Aerial
Off
PR-01
Cable
P-01
Enter-Confirm Setup-Exit Move …†
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
Instructions:
Enter-Confirm Setup-Exit
Move …†
19
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 20
mac001
1200DPI 100LPI
Setup menu
9
10
Use […/†] to select ‘Auto Search‘.
14
Search the real channel number by pressing
[œ/√].
Use […/†] to select ‘Store Channel‘. Press
[ENTER] to move to the second level.
15
Use […/†] to select program number to store
and press [ENTER] to confirm.
Manual Setup
Standard
Reception
Auto Search
Fine Tune
Decoder
Store Channel
Program Name
Instructions:
Manual Setup
PAL-BG
Aerial
CH-02
Standard
Reception
Auto Search
Fine Tune
Decoder
Store Channel
Program Name
Instructions:
Off
PR-01
P-01
Enter-Confirm Setup-Exit Move …†
PAL-BG
Aerial
CH-02
Off
PR-01Channel
Select
P-01
To Store
PR-01
Enter-Confirm Setup-Exit Move …†
11
Select ‘Fine Tune’. You can adjust the fine
tuning.
16
Use […/†] to select ‘Program Name‘. Press
[√] to move to the second level. If your
HDD/DVD Recorder is showing no station name
or is showing a station name incorrectly, you
can correct this.
17
Either select the name from the stored list or
you create the station name and enter a 4-digit
name. Change the letters with the […/†],
move the next letter with the [œ/√].
Manual Setup
Standard
Reception
Auto Search
Fine Tune
Decoder
Store Channel
Program Name
Instructions:
PAL-BG
Aerial
CH-02
Off
PR-01
P-01
Enter-Confirm Setup-Exit Move …†
Manual Setup
12
Use […/†] to select ‘Decoder‘. Press [ENTER]
to move to the second level.
13
When the program is encoded (and you have a
decoder connected to socket EURO AV2), press
[…/†] to select ‘On’ and press [ENTER] to
confirm.
Manual Setup
Standard
Reception
Auto Search
Fine Tune
Decoder
Store Channel
Program Name
Instructions:
PAL-BG
Aerial
CH-02
Off Decoder
Select
PR-01
State
P-01
Off
Enter-Confirm Setup-ExitOnMove …†
20
Downloaded From Disc-Player.com Daewoo Manuals
Standard
Reception
Auto Search
Fine Tune
Decoder
Store Channel
Program Name
Instructions:
PAL-BG
Aerial
CH-02
Off
PR-01
Edit
Channel
P-01
Name
P – 0 1
Enter-Confirm Setup-Exit Move …†
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 21
mac001
1200DPI 100LPI
Setup menu
Auto Set
The HDD/DVD Recorder has a frequency
synthesized tuner capable of receiving channels
that include VHF Low E2~S6, VHF High S7~S36, and
UHF S37~E69.
Set Clock
1 Follow steps 1-2 as shown under ‘Manual Set’.
2 Use […/†] to select ‘Set Clock‘.
Preparation:
Installation
Connect the HDD/DVD Recorder to the desired type
of antenna or cable TV system, as shown in
‘Connecting Antenna/Cable‘ on page 15.
1
2
Follow steps 1-2 as shown under ‘Manual Set’.
Manual Set
Auto Set
Set Clock
Adjust Channels
While ‘Installation‘ is selected, press […/†] to
select ‘Auto Set‘.
Instructions:
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
3
Press [ENTER]. The ‘Set Clock’ menu appears.
Set Clock
Please set the clock:
…
Instructions:
Time : 13 : 00
Enter-Confirm Setup-Exit
Move …†
3
†
Date : 02 \ Jan \ 2010 (Sat)
Instructions:
Press [ENTER] to begin the channel search.
The tuner will automatically search for all
available channels in your area and place them
in the tuner’s memory.
Enter-Confirm Setup-Exit Move …†
4
œ /√ (left/right): Moves the cursor to the
previous or next column.
Installation
…/† (up/down): Changes the setting at the
current cursor position.
Searching for available TV stations:
5 channels found
Please wait...
Enter the date and time.
5
Press [ENTER] to confirm your setting, then
press [SETUP] to exit the Setup menu.
Instructions:
Setup-Exit
After Auto Set is complete, follow the instructions
above to make sure that Tuning Band is set
correctly.
21
Downloaded From Disc-Player.com Daewoo Manuals
SETUP
Enter-Confirm Setup-Exit
Move …†
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 22
mac001
1200DPI 100LPI
Setup menu
Adjust Channels
1 Follow steps 1-2 as shown under ‘Manual Set’.
2 Use […/†] to select ‘Adjust Channels‘.
2
Press […/†] to select the PR number you want
to move to.
3
Press [ENTER]. The selected PR Will be moved
to the new PR number.
Delete
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
After tuning TV stations into your HDD/DVD
Recorder, you may wish to delete a station.
1
Use […/†] to select 'Delete' and press
[ENTER].
Instructions:
Enter-Confirm Setup-Exit
Move …†
RECORDING OPTIONS Settings
3
Press [ENTER]. The Adjust Channels menu
appears.
Adjust Channels
…
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
-------------------
†
Select Channel
Options
Edit
Align
Delete
DVD Record Quality
You can set the default DVD recording quality to
(Approx. time) : HQ (High Quality - 1 hr/disc), SP
(Standard Play - 2 hrs/disc), EP (Extended Play - 4
hrs/disc), or SLP (Super Long Play - 6 hrs/disc).
1
2
3
Press [SETUP]. The Setup menu appears.
4
5
Press [ENTER] to move to the second level.
6
Press [ENTER] to confirm your selection, then
press [SETUP] to exit the menu.
Instructions:
Enter-Confirm Setup-Exit Move …†
4
Use […/†] to select the PR number you want
to adjust. Then press [ENTER].
Edit
After tuning TV stations into your HDD/DVD
Recorder, you may wish to put a name into any
channel you want to.
1
2
Use […/†] to select 'Edit' and press [ENTER].
3
Press [ENTER] to confirm.
You can put a name by pressing […/†] and
[œ /√].
Align
After tuning TV stations into your HDD/DVD
Recorder, you may wish to change the order of PR's
you have in your set, as your preference.
1
Use […/†] to select 'Align' and press [ENTER].
22
Downloaded From Disc-Player.com Daewoo Manuals
Use [œ/√] to select ‘Recording Options‘.
While ‘Recording Options‘ is selected, press
[†] to select ‘DVD Record Quality‘.
Use […/†] to to select the desired Record
Quality (HQ, SP, EP, or SLP).
Recording Options
DVD Record Quality
HDD Record Quality
Auto Chapter
SP Record
Select
SP
Quality
5 min
SLP
EP
Instructions:
SP
Enter-Confirm Setup-Exit
HQ
Move …†
DG-M32D1P-2A(GB)
2006.5.16 5:28 PM
˘
` 23
mac001
1200DPI 100LPI
Setup menu
LANGUAGE Settings
HDD Record Quality
You can set the default HDD recording quality to
(Approx. time) : HQ (High Quality - 51 hrs), SP
(Standard Play - 105 hrs), EP (Extended Play - 204
hrs), or SLP (Super Long Play - 310 hrs).
Follow the same procedure as the 'DVD Record
Quality'.
Recording Options
DVD Record Quality
HDD Record Quality
Auto Chapter
SP
SP HDD
Select
5Quality
min
SLP
Instructions:
EP
Select a language for the HDD/DVD Recorder Setup
menu and on-screen displays.
1
2
3
Press [SETUP]. The Setup menu appears.
4
5
6
Press [ENTER] to move to the second level.
Use [œ] and [√] to select ‘Languages‘.
While ‘Languages‘ is selected, press [†] to
select ‘OSD Language‘.
Use […/†] to select the desired language.
Press [ENTER] to confirm your selection, then
press [SETUP] to exit the menu.
HQ
Auto Chapter
Languages
During recording, chapter markers are added
automatically at fixed intervals. You can set this
interval to 5 minutes, 10 minutes or 15 minutes. To
turn off automatic chapter marking, select ‘Off‘.
Follow the same procedure as the ‘DVD Record
Quality’.
OSD Language
Menu Language
Subtitle Language
Audio Language
Instructions:
English
Select OSD
Default
Language
Default
English
Default
Spanish
French
Enter-Confirm Setup-Exit
Czech
Move …†
Recording Options
DVD Record Quality
HDD Record Quality
Auto Chapter
Instructions:
SP
Select Auto
SP
Chapter
5 min
Off
Menu/Subtitle/Audio Language
5min
Follow the same procedure as the OSD Language.
10min
Enter-Confirm Setup-Exit
15min
Move …†
Select your preferred language for Disc Menus,
Subtitles, and Audio soundtracks.
Default : The disc’s default language is selected.
23
Downloaded From Disc-Player.com Daewoo Manuals
SETUP
Enter-Confirm Setup-Exit SP
Move …†
OSD Language
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 24
mac001
1200DPI 100LPI
Setup menu
PREFERENCES / Video Settings
1
2
3
4
Auto : Convert to the appropriate aspect ratio
Press [SETUP].
automatically.
Use [œ/√] to select ‘Preferences‘.
Video Output
While ‘Preferences‘ is selected, press [†] to
select ‘Video‘.
Progressive Scan Video provides the highest picture
quality with reduced flickering.
Press [ENTER]. The ‘Video‘ submenu is
displayed.
RGB : If you connect the HDD/DVD Recorder to an
analog television using the SCART jacks, set Video
Output to ‘RGB’.
Interlace or Progressive : If you connect the
HDD/DVD Recorder to a digital television (DTV) or
Monitor using the COMPONENT jacks, set Video
Output to ‘Interlace’ or ‘Progressive’.
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Follow the same procedure as ‘TV Aspect Ratio’ to
change the ‘Video Output’.
Instructions:
Video
Enter-Confirm Setup-Exit
Move …†
TV Aspect Ratio
1 Use […/†] to select ‘TV Aspect‘ while the
TV Aspect
Video Output
Interlace
‘Video‘ submenu is displayed.
2
3
Progressive
Press [ENTER] or [√] to go to the second level.
Instructions:
RGB
Enter-Confirm Setup-Exit Move …†
Use […/†] to select the desired ‘TV Aspect’.
Video
TV Aspect
Video Output
Auto
Select Picture
Interlace
Format
4:3 LB
4:3 PS
16:9
Instructions:
Auto
Enter-Confirm Setup-Exit Move …†
4
5
Auto
Interlace
Select Video
Output
Press [ENTER] to confirm your selection.
Press [SETUP] to exit the menu.
4:3 LB : Select when a standard 4:3 TV is
connected. Displays theatrical images with masking
bars above and below the picture.
4:3 PS : Select when a standard 4:3 TV is
connected. Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
16:9 : Select when a 16:9 wide screen TV is
connected.
24
Downloaded From Disc-Player.com Daewoo Manuals
Caution
• Once the Progressive Scan setting is entered,
an image will only be visible on a Progressive
Scan compatible TV or monitor. Press and
hold [P.SCAN] for 5 seconds to return to
Interlace Scan mode.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 25
mac001
1200DPI 100LPI
Setup menu
PREFERENCES / Audio Settings
Follow the same procedure as ‘Video’ Settings to
select ‘Audio’ Settings.
Select when connected to a Dolby Digital or DTS
decoder (or an amplifier or other equipment with a
Dolby Digital or DTS decoder).
Dynamic Range
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
While watching DVD movies, you may wish to
compress the dynamic range of the audio output
(the difference between the loudest and quietest
passages). This allows you to listen to a movie at a
lower volume without losing clarity of sound. Set
‘Dynamic Range‘ to Low or High for this effect.
Follow the same procedure as ‘Digital Output‘ to set
the ‘Dynamic Range’.
Instructions:
Enter-Confirm Setup-Exit
Move …†
‘Audio’ submenu is displayed.
Press [ENTER] or [√] to go to the second level.
Audio
Digital Output
Dynamic Range
Virtual Surround
Use […/†] to select the desired digital output
type.
Low
High
Enter-Confirm Setup-Exit Move …†
Audio
Bitstream
Select Digital
Off
Output
Off
Off
Bitstream
LPCM
Instructions:
Enter-Confirm Setup-Exit Move …†
4
5
Bitstream
Off
Select Dynamic
Off
Range
Off
Instructions:
Digital Output
Dynamic Range
Virtual Surround
SETUP
Digital Output
1 Use […/†] to select ‘Digital Output‘ while the
2
3
Bitstream
Press [ENTER] to confirm your selection.
Press [SETUP] to exit the menu.
Off
Virtual Surround
You can enjoy a simulated 3D effect from two
speakers by setting Virtual Surround to On.
Follow the same procedure as ‘Digital Output‘ to set
the ‘Virtual Surround’ option.
Audio
Digital Output
Dynamic Range
Virtual Surround
Surround
No signal will be output from the Digital Audio Out
jacks.
LPCM
Bitstream
Off
Off
Select Virtual
Off
Instructions:
On
Enter-Confirm Setup-Exit Move …†
Select when connected to a 2 channel digital stereo
amplifier. The HDD/DVD Recorder's digital audio
signal will be output in the PCM 2ch format when
you play a DVD (or HDD) recorded with a Dolby
Digital (only for DVD) or MPEG soundtrack. If the
DVD is recorded with a DTS sound track then no
sound will be heard.
25
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 26
mac001
1200DPI 100LPI
Setup menu
PREFERENCES / Parental Controls
The initial password is ‘0000‘. You must enter this
password before you can change the Parental
Level.
Set Parental Level
The Parental Controls feature allows you to prevent
DVDs from being played based on their ratings or to
have certain discs played with alternative scenes.
You can set the parental level from ‘Adult’ to ‘Kid
safe’.
1
2
3
Press [SETUP].
Use [œ/√] to select ‘Preferences‘.
While ‘Preferences‘ is selected, press [†] to
select ‘Parental Controls‘. And press [ENTER].
Set the new password to something other than
'0000'.
5
After setting the password, press [ENTER]
while 'Set Parental Level' is displayed.
6
7
Enter your new password.
Use […/†] to select the desired parental level
and press [ENTER] to confirm.
Off : If you select Unlock, the Lock feature is not
active. All discs will play in full.
Adult to Kid safe: Some discs contain scenes
Preferences
not suitable for children. If you set a rating for
the HDD/DVD Recorder, all scenes with the
same rating or lower will be played. Higher
rated scenes will not be played unless an
alternative scene is available on the disc. The
alternative must have the same rating or a
lower one. If no suitable alternative is found,
playback will stop. You must enter the 4-digit
password or change the rating level in order to
play the disc.
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move …†
4
Use […/†] to select ‘Set Parental Level’ and
press [ENTER]. The Password Input dialog will
appear. Enter a 4-digit password using the [0-9]
buttons. If this is the first time you have
entered a password, you will be prompted to
enter the password again to confirm it.
Parental Control
Set Parental Level Select
Offthe
Change Password parental level
Parental Country CodeOff AU
Set Hdd Parental LockAdultOff
NC-17
R
Parental Control
Set Parental Level
Change Password
Parental Country Code
Set Hdd Parental Lock
Instructions:
Off
Enter-Confirm Setup-Exit Move …†
AU
Off
8
Press [ENTER] to confirm your rating selection,
then press [SETUP] to exit the menu.
Instructions:
Parental Control
Enter-Confirm Setup-Exit Move …†
Set Parental Level
Adult
Change Password
Parental Country Code AU
Set Hdd Parental Lock Off
Change Password
Current Code
____
Enter New Code
____
ConfirmPassword
Code
____
Enter Password
Instructions:
Setup-Exit Enter-Confirm
Instructions:
Setup-Exit Enter-Confirm
26
Downloaded From Disc-Player.com Daewoo Manuals
**__
Instructions:
Enter-Confirm Setup-Exit Move …†
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 27
mac001
1200DPI 100LPI
Setup menu
Change Password
1 While ‘Preferences‘ is selected, press [†] to
Parental Country Code
1 While ‘Preferences‘ is selected, press [†] to
select ‘Parental Controls‘. Then press [†] to
select ‘Parental Country Code‘.
select ‘Parental Controls‘.
2
Press [ENTER]. The ‘Parental Controls‘ submenu
appears.
3
Use […/†] to select ‘Change Password‘ then
press [ENTER].
Parental Control
Set Parental Level
Adult
Change Password
Parental Country Code AU
Set Hdd Parental Lock Off
Parental Control
Set Parental Level
Adult
Change Password
Parental Country Code AU
Set Hdd Parental Lock Off
Enter-Confirm Setup-Exit Move …†
2
Press [ENTER]. Enter your current 4-digit
password then press [ENTER].
3
Use […/†] to select the desired country and
press [ENTER] to confirm.
Enter-Confirm Setup-Exit Move …†
4
The ‘Change Password’ submenu appears.
Enter your current 4-digit password.
Change Password
Current Code
SETUP
Instructions:
Instructions:
Parental Country Code
Please select Country for Parental Setup
****
Enter New Code
****
Confirm Code
**__
Instructions:
Setup-Exit Enter-Confirm
…
Australia
†
Belgium
Denmark
Finland
France
Instructions:
Enter-Confirm Setup-Exit Move …†
5
Enter a new 4-digit password. Re-enter the
new password to confirm, press [ENTER].
• Master Password : If you forget your
password, press 3,3,0,8 on the remote control
and then press [ENTER].
• Set the new password to something other than
'0000'.
27
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 28
mac001
1200DPI 100LPI
Setup menu
Set Hdd Parental Lock
It allows you to prevent from being played the title
parental locked in HDD video menu. You can set the
HDD parental lock as follow.
1
While ‘Preferences‘ is selected, press [†] to
select ‘Parental Controls‘. And press [ENTER].
2
Use […/†] to select ‘Set Hdd Parental Lock’
and press [ENTER]. The Password Input dialog
will appear. Enter a 4-digit password using the
[0-9] buttons. If this is the first time you have
entered a password, you will be prompted to
enter the password again to confirm it.
PREFERENCES / Auto Settings
1
While ‘Preferences‘ is selected, press [†] to
select ‘Auto Settings‘.
2
Press [ENTER] to display the submenu.
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move …†
Parental Control
Set Parental Level
Adult
Change Password
Parental Country Code AU
Set Hdd Parental LockSelect
Offthe
parental lock
Off
On
Instructions:
Enter-Confirm Setup-Exit Move …†
active. All titles in the HDD will play in full.
Auto Clock enables the HDD/DVD Recorder to set
the clock automatically whenever it is in Standby
mode (plugged in but powered off).
Auto Clock is only available for models with the VPS/PDC
function.
Some broadcasting stations may send the time and date
along with the VPS/PDC data. The video will
automatically use this time and date during the initial
setting up procedure during normal use, and every time
you switch the video off at the mains. If you find that this
time and date is incorrect you can remove this feature by
following the steps below changing it to the OFF mode,
you will then have to manually set the time and date, see
above.
On : If you select On, the Parental Lock feature
1
Use […/†] to select 'Auto Clock Set' and press
[ENTER].
2
Use […/†] to change the 'Auto Clock Set'
status, and press [ENTER] to confirm.
3
After setting the password, press [ENTER]
while 'Set Hdd Parental Lock' is displayed.
4
5
Enter your new password.
Use […/†] to select the desired parental level
and press [ENTER] to confirm.
Off : If you select Off, the Lock feature is not
is active in HDD Edit menu. To playback the
title parental locked in HDD video menu, you
must enter the 4-digit password. For detailed
information, refer to page 50.
6
Auto Clock Set
Press [ENTER] to confirm your rating selection,
then press [SETUP] to exit the menu.
Auto Settings
Auto Clock Set
VPS/PDC
On
Select Auto
On
Clock Status
Off
On
Instructions:
Enter-Confirm Setup-Exit Move …†
28
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 29
mac001
1200DPI 100LPI
Setup menu
VPS/PDC
Auto Settings
Auto Clock Set
VPS/PDC
On
On
Select VPS/
PDC Status
Off
On
Instructions:
Enter-Confirm Setup-Exit Move …†
"VPS/PDC" and "Auto Clock Set" are not provided
for some countries.
PREFERENCES / Hard Disk
1
While ‘Preferences‘ is selected, press [†] to
select ‘Hard Disk‘.
2
Press [ENTER] to display the submenu.
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move …†
Auto Title Delete
1 Use […/†] to select ‘Auto Title Delete‘ while
the ‘Hard Disk’ submenu is displayed. Press
[ENTER] or [√] to go to the second level.
HDD Preferences
Auto Title Delete
Buffering Mode
Jump To Interval
Reset Hard Disk
On
Preserve
Select Auto
5 Min
Delete
Off
On
Model : ST3160022ACE 250GB
Instructions:
Enter-Confirm Setup-Exit Move …†
2
3
4
SETUP
VPS/PDC is a service provided by some stations to
enable you to perform timer recordings precisely
even if the broadcaster delays the start time of the
program slightly. The time you enter is the VPS/PDC
time so this must be correct. Not all stations offer
VPS/PDC, in which case the player will start at the
time you enter and not the actual start time of the
programme.
If you wish to start recording at a specific time
without it being adjusted by the VPS/PDC system in
the event of a delay, switch VPS/PDC off otherwise
the player will not record.
Follow the same procedure as ‘Auto Clock Set’ to
set the ‘VPS/PDC’ status.
Use […/†] to select the desired option.
Press [ENTER] to confirm your selection.
Press [SETUP] to exit the menu.
Off
With this selection, the HDD/DVD Recorder will
stop recording and prompt the user to erase some
titles and create more room on the HDD, if the
[STOP] is not pressed and the recording takes all the
available space on the hard disk drive.
On
With this selection, the HDD/DVD Recorder
overwrites un-protected titles, if the [STOP] is not
pressed and the recording takes all the available
space on the hard disk drive.
Buffer Mode
1 Use […/†] to select ‘Buffering Mode‘ while
the ‘Hard Disk’ submenu is displayed. Press
[ENTER] or [√] to go to the second level.
HDD Preferences
Auto Title Delete
Buffering Mode
Jump To Interval
Reset Hard Disk
On
Preserve
Select Buffering
5 Mode
Min
Preserve
Refresh
Model : ST3160022ACE 250GB
Instructions:
Enter-Confirm Setup-Exit Move …†
29
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 30
mac001
1200DPI 100LPI
Setup menu
2
3
4
Use […/†] to select the desired option.
Reset Hard Disk
Press [ENTER] to confirm your selection.
This feature enables you to erase the entire content
of the HDD. Please proceed with caution, as this
process is irreversible.
Press [SETUP] to exit the menu.
Preserve
1
“Preserve” maintains the content of the buffer upon
changing the TV channel.
Use […/†] to select ‘Reset Hard Disk’ while
the ‘Hard Disk’ submenu is displayed.
2
Press [ENTER].
Refresh
HDD Preferences
Refreshes the buffer upon changing the TV channel.
Auto Title Delete
Buffering Mode
Jump To Interval
Reset Hard Disk
Jump To Interval
This feature enables you to skip to interval which is
set in timeshift mode.
1
Model : ST3160022ACE 250GB
Use […/†] to select ‘Jump To Interval‘ while
the ‘Hard Disk’ submenu is displayed. Press
[ENTER] or [√] to go to the second level.
HDD Preferences
Auto Title Delete
Buffering Mode
Jump To Interval
Reset Hard Disk
On
Preserve
Select Jump
5 Min
Interval
30 Sec
Instructions:
Enter-Confirm Setup-Exit Move …†
3
The Reset menu will appear. Use the […/†]
buttons to select ‘Yes‘ or ‘No’ and press
[ENTER].
4
Select ‘Yes‘ to begin Hard Disk Formatting.
While hard disk is reformatted, do Not power
Off absolutely.
1 Min
Model : ST3160022ACE 250GB
Instructions:
3 Min
Enter-Confirm Setup-Exit Move5…†
Min
2
3
4
On
Preserve
5 Min
Reset Hard Disk
All recorded programs will be
deleted. Are you Sure?
Use […/†] to select the desired option.
Yes
Press [ENTER] to confirm your selection.
No
Instructions:
Press [SETUP] to exit the menu.
Enter-Confirm Setup-Exit
Reformat Hard Disk
Hard Disk currently Erasing.
Please do not power off...
5
30
Downloaded From Disc-Player.com Daewoo Manuals
Power is turned off automatically when HDD
reset is finished.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 31
mac001
1200DPI 100LPI
Setup menu
System Information
Restore Defaults
System Information helps service personnel identify
key firmware information about your HDD/DVD
Recorder in case service is required.
If you wish, you can reset the HDD/DVD Recorder to
its original factory settings.
1
2
Press [SETUP].
Use [œ/√] to select ‘Restore Defaults‘.
System Info
System Version
DivX VOD
Restore Defaults
If you select this function all
settings will be removed and
the product will be set into
initial (factory) mode.
System Version
Version
FD30902DXVL
3.6.5
Micom Software
23.10.5
Enter-Confirm
Setup-Exit
BDR-B2DY
Move Loader
…† Version
Main Build
Instructions:
Instructions:
SETUP
Enter-Confirm Setup-Exit
Move …†
Instructions:
Setup-Exit
3
4
System Info
System Version
DivX VOD
Press [ENTER].
The Initialize menu will appear. Use the […/†]
buttons to select ‘Yes‘ and press [ENTER].
Restore Defaults
DivX Video On Demand
Are you sure you want to restore
default settings?
Your registration code is : 6S4XBYKI
Yes
Instructions:
To learn more visit www.divx.com/vod
Enter-Confirm Setup-Exit
Move …†
No
Instructions:
Enter-Confirm Setup-Exit
Instructions:
Setup-Exit
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and
purchase videos using the DivX® VOD service. For
more information, visit www.divx.com/vod.
• Some options cannot be reset, including
Parental Controls, Password, and Country
Code.
• After Restoring Defaults, the unit is powered
off automatically. At this time, if you power on
again, the Installation menu appears. You
must set the country, language, channel, and
clock settings again.
31
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 32
mac001
1200DPI 100LPI
On-Screen Display Overview
The On-Screen Display provides feedback on the
status of the HDD/DVD Recorder and/or the
currently loaded disc or HDD. To access the OnScreen Display (or OSD), press [DISPLAY].
3
Use […†] to change the numbers. Press [ENTER]
to confirm.
Chapter
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Displaying Disc Information
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
To display information about the currently loaded
disc or HDD:
2
Use […†] to select the ‘Chapter‘ icon on the onscreen display. Press [ENTER] to display a
submenu.
3
Use […†] to change the numbers. Press [ENTER]
to confirm.
On-screen display operation
1
Press [DISPLAY] repeatedly to display/change
the information displayed on-screen.
2
To remove the on-screen display, press
[DISPLAY] repeatedly until it disappears.
See the descriptions below for detailed
explanations of the on-screen displays for each
media type.
Some discs may not provide all the features shown
in the on-screen display examples.
Temporary Feedback Icons
Action prohibited or not available
Angle
Shows the current angle number and total number of
angles, and changes the angle number.
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
2
Use […†] to select the ‘Angle‘ icon on the onscreen display. Press [ENTER] to display a
submenu.
3
Use […†] to change the numbers. Press [ENTER]
to confirm.
Audio
Disc Information options for DVD, HDD
DVD
Title
1 of 3
Chapter
23 of 41
Angle
1 of 1
Audio
2. Eng
Subtitle
Off
Elapsed
01:29:31
Instructions:
Enter-Confirm Setup-Exit
Move …†
HDD
Title
Chapter
Audio
Elapsed
1 of 3
23 of 41
2. Eng
01:29:31
Instructions:
Enter-Confirm Setup-Exit
Move …†
Title
Shows the current title number and total number of
titles, and skips to the desired title number.
Shows the current audio soundtrack language,
encoding method, and channel number, and changes
the setting.
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
2
Use […†] to select the ‘Audio‘ icon on the onscreen display. Press [ENTER] to display a
submenu.
3
Use […†] to change the numbers. Press [ENTER]
to confirm.
Subtitle
Shows the current subtitle language, and changes the
setting.
1
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
2
2
Use […†] to select the ‘Title‘ icon on the onscreen display. Press [ENTER] to display a
submenu.
Use […†] to select the ‘Subtitle‘ icon on the onscreen display. Press [ENTER] to display a
submenu.
3
Use […†] to change the numbers. Press [ENTER]
to confirm.
32
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 33
mac001
1200DPI 100LPI
On-Screen Display Overview
Elapsed
Shows the elapsed playing time, and skips to the
desired time.
Changing the TV Audio Channel
You can change the TV audio using the [AUDIO]
button.
Press [AUDIO] repeatedly to change the TV audio,
according to the Broadcast audio signal as shown
below.
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
2
Use […†] to select the ‘Elapsed’ icon on the onscreen display. Press [ENTER] to search by time.
The submenu appears.
3
Use […†] to change the numbers and use [œ √]
to move left or right.
• BIL Audio Signal
4
Within 7 seconds, press [ENTER] to confirm the
start time. Playback starts from the selected time
on the disc.
• MONO Audio Signal
Stereo ➝ Mono ➝ Stereo
BIL I ➝ BIL II ➝ (BIL Off) ➝ BIL I
Mono
The current audio channel is displayed on-screen.
• If the sound is poor quality when set to Stereo,
you can often improve it by changing to Mono.
• When an external input is selected, the audio
channel can be switched only to Stereo.
Changing TV Channels
If no disc is playing, you can change TV channels
using the [0-9] or [PR+/–] buttons on the remote
control or [PR+/–] buttons on the front panel.
33
Downloaded From Disc-Player.com Daewoo Manuals
SETUP
For the title recorded without DVD navigation
information, such as the one from broadcast or line
input, ‘Elapsed’ function does not work.
• STEREO Audio Signal
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 34
mac001
1200DPI 100LPI
DVD Playback
Playing a DVD
1
Still Picture and Frame-by-Frame Playback
1 Press [PLAY/PAUSE] during playback. The
Press [DVD] to set the remote
control to operate the DVD.
HDD/DVD Recorder will go into Still mode.
DVD Selected
Turn the TV on and select the
video input source connected
to the HDD/DVD Recorder.
Actions are now for
DVD
Audio system: Turn the audio ■ Stop
system on and select the input
source connected to the HDD/DVD Recorder.
2 Press [OPEN/CLOSE] to open the disc tray.
3 Load your disc in the tray with the playback side
down (label side up).
2
Fast Forward/Backward
1 Press [REW (œœ)] or [FF (√√)] during playback.
The HDD/DVD Recorder will go into Search
mode.
2
4 Press [OPEN/CLOSE] to close the tray.
5 'LOAD' appears on the front panel display, and
playback starts automatically. If playback does
not start, press [PLAY (√)]. In some cases, the
Disc menu may appear instead.
Playing a DVD
When a DVD+RW or unfinalised DVD+R/-R/-RW is
inserted, no title is played automatically but the
current TV channel displays on the screen.
If you want to play a title on the DVD+R (+RW), you
must press [MENU] or [PLAY] to display the disc
menu. Select a title to play then press [ENTER].
If a Disc menu is displayed
• A Disc menu may be displayed when you load
a DVD. Use the [œ √…†] buttons to select
the title/chapter you want to view, then press
[ENTER] to start playback. Press [TITLE] or
[MENU] to return to the Disc menu.
• The HDD/DVD Recorder will not play discs
with Region codes different from the HDD/DVD
Recorder. The Region code for this HDD/DVD
Recorder is 2 (two).
• Unless stated otherwise, all operations
described below use the remote control. Some
features may also be available in the Setup
menu.
• A disc which is recorded by computer at high
speeds (greater than or equal to 2x) may not be
recognized.
• A disc which is recorded with unauthorized
movie material may not be played.
• A disc which is recorded by another recorder or
not recorded correctly may not be recognized
or played.
34
Downloaded From Disc-Player.com Daewoo Manuals
You can back up or advance the picture frameby-frame by pressing [FF (√√)] repeatedly
during Still mode.
Press [REW] or [FF] to select the desired speed:
√√ X2, √√ X4, √√ X8, √√ X16, √√ X32, √
(forward) or œ, œœ X2, œœ X4, œœ X8, œœ
X16, œœ X32 (backward).
Slow Motion
Press [SLOW+] or [SLOW-] to select the desired
speed: 1/2, 1/4, 1/8,1/2, ...(forward), or 1/2, 1/4,
1/8, 1/2, ... (backward).
Changing the Audio Language
Press [AUDIO] and then press [AUDIO] repeatedly
during playback to hear a different audio language
or audio track.
Subtitles
Press [SUBTITLE] and then press [SUBTITLE]
repeatedly during playback to select among all
available subtitle languages.
Zoom
The Zoom function allows you to magnify the video
image and scroll around the enlarged image.
1
Press [ZOOM] during Play mode to activate the
Zoom function.
Each press of the [ZOOM] button changes the
Zoom level as follows: X1 (normal size) ➝ X2
➝ X4 ➝ X1 (normal size)
2
Use the [œ √…†] buttons to scroll around the
zoomed picture.
3
To resume normal playback, press [ZOOM]
repeatedly until the X1 (normal picture)
appears.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 35
mac001
1200DPI 100LPI
DVD Playback
Selecting Titles
• The Zoom function may not work on some
DVDs (ex. Jpg..)
• The Zoom function does not work in PAUSE
mode.
When a disc has more than one title, you can select
among all available titles as follows:
1
Repeat
1 To repeat the currently playing chapter, press
[REPEAT]. ‘REPEAT CHAPTER’ appears on the
TV screen.
Selecting Chapters
2
To repeat the currently playing title, press
[REPEAT] twice. ‘REPEAT TITLE’ appears on the
TV screen.
3
To repeat the whole disc, press [REPEAT] three
times. ‘REPEAT DISC’ appears on the TV
screen.
4
1
Press [PREV (§)] or [NEXT (∞)] briefly during
playback to select the next or previous chapter.
2
To skip directly to any chapter during playback,
press [DISPLAY]. Use […†] to select the
Chapter icon, then press [ENTER] to display a
submenu. Use […†] to select the desired
chapter number and press [ENTER] to confirm.
Disc Menus
[VCD] Track ➝ Disc ➝ Off ➝ Track ...
Many DVDs contain Disc menus that allow you to
access special features. To open a Disc menu, press
[MENU]. Then use the […†] buttons to highlight
your desired selection and press [ENTER].
[CDDA, MP3] Track ➝ All ➝ Off ➝ Track ...
A-B
You can repeat a scene between two points (A and
B):
Press [PLAY/PAUSE] play to the start of the
desired scene.
2
3
4
5
Press [A-B] to mark the start point.
1
2
the Title menu will appear on the TV screen.
Otherwise, the Disc menu may appear.
Press [A-B] to mark the end point.
The marked scenes are repeated continuously
until you stop the repeat by pressing [A-B]
button again.
the Search menu.
T/
3
œ
C
1
To exit the Disc menu, press [STOP] or [HDD].
Title Menus
1 Press [TITLE]. If the current title has a menu,
Use [FF], [NEXT] to search the end point.
Search
1 Press [SEARCH] to display
Press [MENU]. The Disc menu is displayed.
2
The Title menu may contain camera angles,
spoken languages and subtitle options, as well
as the chapters for the title.
…
†
Use [œ √] to move to Title
√
(T) or Chapter (C) and use
[…†] to set the title or chapter number.
35
Downloaded From Disc-Player.com Daewoo Manuals
PLAYBACK
[DVD] Chapter ➝ Title ➝ Disc ➝ off ➝
Chapter ...
2
When a title on a disc has more than one chapter,
you can select among all available chapters as
follows:
Each press of the [REPEAT] button changes the
repeat mode as follows:
1
Press [DISPLAY] and use […†] to select the
Title icon. Press [ENTER] to display a submenu.
Use […†] to select the desired title number
and press [ENTER] to confirm.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 36
mac001
1200DPI 100LPI
Playing a Picture, Music or DivX files
DivX Playback (HDD Media, DVD)
The HDD/DVD Recorder can play DivX files on a
disc such as CD-R/RW, DVD+R/RW, DVD-R/RW, or
on HDD Media.
1
Prior to playing Divx files on disc, insert disc
and close the tray.
2
Press [MENU] to bring up the Media Browser
and select the media (HDD Media, DVD) you
want to play.
HDD Media Browser
HDD Pictures
HDD Music
HDD DivX
55 Files
Subtitles
When the subtitles are not displayed provided
although it has a file of subtitles:
1
Move to the Menu of DivX by pressing the
[STOP] button.
2
Use […†] to select a file of subtitles you want
by using it.
3
Select the file of subtitles at that time by
pressing the [ENTER] button.
4
After moving the file of DivX you want to play,
play it by pressing the [ENTER] button.
DVD Browser
DVD Pictures
DVD Music
DVD DivX
55 Files
Move-…† Select-ENTER Back-MENU Exit-SETUP
3
Press [ENTER] and select the DivX category
using […†], then press [ENTER].
DVD DivX
Item : DivX
Vid : 1/2
.. \
1 Shrek 2-1.AVI
2 Shrek 2-2.AVI
2 Items
Move-…†œ √ Edit-EDIT
4
5
6
1/2 …†
Copy-DUB
Exit-SETUP
The DivX Menu appears on the TV screen.
Use […†] to select a file, then press [ENTER].
Press [FF] or [REW] during playback. The
HDD/DVD Recorder will go into Search mode.
Press [FF ]or [REW ]to select the desired speed:
√√X2, √√X4, √√X8, √ PLAY (forward) or
œœ X2, œœ X4, œœ X8, œ PLAY (backward)
Use [PLAY/PAUSE] to pause playback while the
title is playing.
7
To stop playback at any time, press [STOP].
36
Downloaded From Disc-Player.com Daewoo Manuals
• Playable DivX files are ".avi",".divx" and
playable DivX subtitles are ".smi", ".srt", ".txt",
".sub (Micro DVD,Subviewer)".
• The file size of the DivX subtitle is limited to
128KB.
• Playable MPEG 4 SP and ASP is XVID, DivX5.1,
DivX5.05, DivX5.02, DivX4.1.2, DivX3.11, and
Dr. DivX1.0.2.
• ASP does not support GMC & Qpel(Quarter
Pixel).
• Playable biterates is to max. 4MBPS.
• Playable frame number of screens per a
second is 30, 25, 24, 12, and 8.
• Playable resolution is from Min. 200X100 to
max. 720X576.
• Playable audio stream formats are DTS, MPEG
I Layer III, MPEG II, PCM and AC-3.
• It may not be played according to a type of
DivX files, a recording method, or a disc state.
(The device was authenticated for DivX files
from the DivX Networks, Inc. and it is available
for playing a normal DivX but may be
unavailable for playing the DivX files that have
been manufactured with an illegal or abnormal
Codec.)
• DivX,DivX certified and associated logos are
trademarks of DivX Networks, Inc. and are
used under license.
• When the image/sound structure of a recorded
file have not been undergone the interleave, it
will output either the image or the sound.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 37
mac001
1200DPI 100LPI
Playing a Picture, Music or DivX files
Audio CD Playback
The HDD/DVD Recorder can play audio CDs on CDR/RW, DVD+R/RW, DVD-R/RW.
1
2
DVD Music
Item : MP3
Tr : 10/204
Insert the disc and close the tray. In case an
audio CD is already loaded, press [MENU] and
select the DVD browser using […†], then
press [ENTER].
■ STOP
Normal
The CD Music folder tree appears. Use […†]
to select a track or a file, then press [ENTER]
twice or just [PLAY].
01 INTRO.MP3
01 SHE’S MINE.MP3
01 --,--- --- --.MP3
01 --,--- --- --.MP3
01 CLOSE YOUR EYES.MP3
01 TIMELESS-S.G..MP3
01 TOO LATE.MP3
01 ROCK WITH YOU.MP3
01 IT’S MY LIFE.MP3
01 --,--- --- --.MP3
216 Items
Move-…†œ √ Edit-EDIT
Copy-DUB
22/216 …†
Exit-SETUP
Playback will stop at the end of the disc.
Item : CD Audio
Tr : 3/13
■ STOP
Normal
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
TRACK 9
TRACK 10
00:03:45
00:03:46
00:03:47
00:03:48
00:03:49
00:03:50
00:03:51
00:03:52
00:03:53
00:03:54
13 Tracks
1/13 …†
Move-…†œ √ Select-ENTER Back-MENU Exit-SETUP
3
While playing an Audio CD, use [FF] or [REW]
for 2x speed playback.
4
Use [PLAY/PAUSE] to pause playback while the
disc is playing.
5
To stop playback at any time, press [STOP].
MP3 Playback (HDD Media, DVD)
The HDD/DVD Recorder can play MP3 files on a
disc such as CD-R/RW, DVD+R/RW, DVD-R/RW, or
on HDD Media.
1
Prior to playing Divx files on disc, insert disc
and close the tray.
2
Press [MENU] to bring up the Media Browser
and select the media (HDD Media, DVD) you
want to play.
3
Press [ENTER] and select the Music category
using […†], then press [ENTER].
4
The MP3 folder tree appears. Use […†] to
select a track or a file, then press [ENTER] or
[PLAY].
JPEG Playback (HDD Media, DVD)
The HDD/DVD Recorder can play JPEG Picture files
on a disc such as CD-R/RW, DVD+R/RW, DVDR/RW, or on HDD Media.
1
Prior to playing Divx files on disc, insert disc
and close the tray.
2
Press [MENU] to bring up the Media Browser
and select the media (HDD Media, DVD) you
want to play.
3
Press [ENTER] and select the Picture category
using […†], then press [ENTER].
4
The JPEG folder tree appears. If there are
folders which contain JPEG files, select the
desired folder using […†] and press [ENTER].
5
Select the thumbnail you want to display using
[…†] and press [ENTER].
Playback will stop at the end of the media.
37
Downloaded From Disc-Player.com Daewoo Manuals
PLAYBACK
• On the MP3 CD menu, you can display the
folders on the disc. Use […†] to select the
folder icon on the MP3 CD menu then press
[ENTER]. You can also display just the tracks in
the folders. Use […†] to select a folder then
press [ENTER].
• Press [REPEAT] to repeat a track (file) and press
again to repeat the whole media.
• If the disc contains JPEG files as well as MP3
files, you can change the Play mode to display
JPEG image files by pressing [MENU].
CD Music
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 38
mac001
1200DPI 100LPI
Playing a Picture, Music or DivX files
Playing MP3 Files During a Slide Show
You can enjoy a slide show while listening to MP3
music files.
DVD Pictures
Item : JPG
Pic : 2/143
.. /
IMG_0248.JPG
IMG_0250.JPG
IMG_0261.JPG
IMG_0268.JPG
IMG_0266.JPG
IMG_0277.JPG
IMG_0282.JPG
24 Items
Move-…†œ √ Edit-EDIT
6
2/24 …†
Copy-DUB
Exit-SETUP
The full size image will be displayed and a slide
show starts automatically with a time interval
of 10 seconds.
7
Press [NEXT] or [PREV] to manually skip to the
next or previous image.
8
Press [√] (or [œ]) to rotate the image (counter)
clockwise.
9
Press [STOP] to exit the slideshow.
• If the disc contains MP3 files as well as JPEG
files, you can change the Play mode to play
MP3 files by pressing [MENU].
• When a CD contains both MP3 files and JPEG
files, the default Play mode is JPEG image
files.
• MP3 files encoded below 32kbps are not
supported.
38
Downloaded From Disc-Player.com Daewoo Manuals
1
Prepare the Disc which includes both MP3 and
JPEG files. Or copy the files to HDD Media
category.
2
Insert the disc. Then press [MENU] to bring up
Media browser.
3
Select the media you want to play between
HDD Media and DVD and go to music category.
4
During playback of the MP3 files, press [MENU]
to return to the selected media browser. The
music playback will not stop.
5
Go to Picture category, and select the image
files and press [ENTER] to start the slide show.
6
The MP3 files you selected continue to play
during the JPEG slide show.
• The HDD/DVD Recorder can playback up to
1000 files per disc.
• Press [œ/ √] to move up and down per 10 files
in DVD(HDD) Pictures(Music,DivX) Browser.
Either HDD Videos does.
• Customers should note that permission is
required in order to download MP3 and music
from the Internet. Our company has no right to
grant such permission. Permission should
always be sought from the copyright owner.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 39
mac001
1200DPI 100LPI
Time shifting & Saving
Time shifting in HDD mode
When the HDD/DVD Recorder is turned on or you
press the [HDD] button on the remote control or the
[DVD/HDD] button on the front panel to move to
HDD mode from other menus, the last viewed TV
channel will be tuned in and Time shifting starts
automatically. Time shifting allows ‘pausing’ the
live TV broadcast for up to 60 minutes. At any time,
the viewing can resume. Press [PLAY/PAUSE] to
pause the broadcast, press [PLAY/PAUSE] again to
resume TV viewing. If the system is paused for 60
minutes, it will automatically resume TV viewing.
12 : 34
13 : 34
√ LIVE
If you are using the default value of “Setup –>
Preferences –> Hard Disk –> Buffer mode –>
Refresh”, and change Channels, the Time shifting
buffer data will be lost. No message will be
provided prior to doing so. However, if you set
“Setup –> Preferences –> Hard Disk –> Buffer
mode –> Preserve”, and change Channels, the Time
shifting buffer data will be maintained.
During Time shifting, a Timer recording may come
up. As you cannot watch one program in Time
shifting and record another channel, the HDD/DVD
Recorder will prompt you to confirm if you want to
keep the current channel or proceed with Timer
recording. If there is no response, this combination
assumes Timer recording should be started. The
message will appear 5 seconds before the TImer
recording is due.
Press [STOP] to return to the live broadcast.
Navigation in Time Shifting mode
You can navigate in Time shifting mode and control
the output by using the following remote control
keys:
Changes the channel
Fast Forward. Press to cycle
through 2, 4, 8, 16, 32X speeds.
Fast Rewind. Press to cycle
through 4, 8, 16, 32X speeds.
Slow forward/reverse. Press to
cycle through 1/2, 1/4 or 1/8
speeds.
Jumps back to the 'jump to
interval' time is set in the setup
menu.
Jumps forward to the 'jump to
interval' time is set in the setup
menu. Refer to page 30.
39
Downloaded From Disc-Player.com Daewoo Manuals
PLAYBACK
Time shifting is stored in a buffer that contains 60
minutes of recording. After 60 minutes, the buffer
will be progressively overwritten. If you need to
keep the video contained in this buffer for future
usage, you can Save all or part of the buffer.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 40
mac001
1200DPI 100LPI
Time shifting & Saving
Saving to HDD
Save
While viewing a program, press [REC]. This will
start saving the segment you are watching. You can
navigate forward. During the saving operation, by
pressing [REC], you will increase the length of the
program you are saving by 15 minutes up to a
maximum of 10 hours. Press [STOP] to indicate the
end of the saving operation. In case of recording a
part of Time shifting buffer, the buffer will be
empty.
You can not change the channel or the source if
saving is on-going (the end of the recording
segment is either not entered, or in case of a long
recording, it has not been reached.) Saving has to
be manually stopped first ( by pressing [STOP].) The
HDD/DVD Recorder will prompt you to Stop saving
first. The segment will be saved on the HDD and
then channel or source change will be performed.
The saved program will be removed from the Time
shifting buffer when it is about to be overwritten by
a Live recording. During recording from the Time
shifting buffer, [PLAY/PAUSE] dose not work as
pause(play) the recording but work as pause(play)
the broadcast in the buffer.
Indicates
recording to
the HDD and
Rec Speed
Indicates Time shifting operation: PLAY,
STILL, LIVE, STOP, FF, REW, etc
recording
Other Operations in TIme shifting saving mode
While in Time shifting saving mode, you can use the
following keys for other operations: HDD, DVD,
MENU, OPEN/CLOSE, SETUP, INPUT, P.SCAN
buttons.
40
Downloaded From Disc-Player.com Daewoo Manuals
• If the unit is set as “Setup –> Preferences
–> Hard Disk –> Auto Title Delete –> On”
if the [STOP] is not pressed and the recording
takes all the available space on the hard disk
drive, the HDD/DVD Recorder will erase
unprotected titles to the amount of about 10
hours in HQ mode (approx. 40GB) and keep
recording.
• If the unit is set as “Setup –> Preferences
–> Hard Disk –> Auto Title Delete –> Off”
if the [STOP] is not pressed and the recording
takes all the available space on the hard disk
drive, the HDD/DVD Recorder will stop
recording and prompt the user to erase some
titles and create more room on the HDD.
• If you want to stop recording in Time shifting
specific operation (FF, REW, STILL, etc), press
[STOP] to return to LIVE mode and then press
[STOP] again.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 41
mac001
1200DPI 100LPI
Basic Recording
Recording to DVD or HDD
If you press [DVD] or [HDD], you will be in DVD or
HDD mode.
You can start recording to DVD or HDD by pressing
the [REC] button. (In the case of a DVD, it must be a
recordable media in the tray.)
1 Turn on the HDD/DVD Recorder and load a
recordable disc .
Make sure your TV input is set to view the
HDD/DVD Recorder.
Select the media to record by pressing [DVD] ,
[HDD], or [DVD/HDD] on the front panel.
2 Set the desired Recording mode by pressing [REC
SPEED] repeatedly.
Record Mode
Record Mode
Dvd record quality
now set to :
Hdd manual record
quality set to :
HQ 0Hrs 58Mins
HQ 27Hrs 13Mins
■ Stop
√ LIVE
or [INPUT].
You can select which video input you want to
record from the following options are available.
TV, AV, AVF, S-VIDEO Input, DV Input
4 Press [AUDIO] to select the audio channel to
record (Stereo, BIL, or Mono).
The table below shows what audio channel will
be recorded with different settings and
different types of broadcasts.
The last column (Monitor Audio) shows what
you will hear during recording. For example, if
the TV broadcast is in Stereo, then setting the
HDD/DVD Recorder to Stereo will record the
broadcast in Stereo, and the Monitor Audio will
also be in Stereo.
Broadcast Audio
L Ch
R Ch
MONO
MONO
L
R
MONO
MONO
BIL I
BIL I
BIL II
BIL II
(BIL I)
(BIL I)
6 Press [STOP (■)] to stop recording.
• The maximum number of DVD titles per disc is
49. If the HDD/DVD Recorder is powered off
during DVD recording, the recording will not be
saved.
• If a DVD+RW or unfinalised DVD±R, DVD-RW
disc is inserted in the tray, no title is played
automatically after loading is finished.
• If you are recording to a blank DVD±R (±RW)
disc, it may take up to 7 minutes (it depends on
the disc) for post processing after recording.
One Touch Record (OTR)
3 Set the desired Recording source by pressing [DV]
TV
Selected
Broadcast Audio
MONO MONO
STEREO STEREO
MONO
BIL I
BIL
BIL II
(BIL Off)
Recording will start. The REC indicator lights on
the front panel display.
Recording continues until you press [STOP] or
the disc is full.
To record for a fixed length of time, see One
Touch Record.
One Touch Recording allows you to add recording
time in fixed increments at the touch of a button.
1 Follow steps 1-4 under Recording from TV.
2 Press [REC (●)] repeatedly to set the length of the
recording.
Recording starts after the first press. Each
subsequent press increases the recording time
by 15 minutes within the available space (DVD)
or 10 hours (HDD). The recording time is
displayed on the front panel.
Monitor
Audio
MONO
STEREO
MONO
BIL I
BIL II
(BIL Off)
41
Downloaded From Disc-Player.com Daewoo Manuals
PLAYBACK
Available
disc (or
HDD)
space will
be
displayed
by
selecting
recording
mode.
5 Press [REC (●)] once.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 42
mac001
1200DPI 100LPI
Timer Recording
To Pause the Recording
1
Press [PLAY/PAUSE] to pause the disc during
recording.
2
To continue recording in DVD mode, press
[PLAY/PAUSE] or [REC (●)].
• To quit One Touch Recording, press and hold
[STOP] for 5 seconds.
• The HDD/DVD Recorder will automatically
power off when One Touch Recording ends.
• You cannot record on the HDD and DVD at the
same time.
• Pressing [PLAY/PAUSE] during HDD recording
does not act as record pause but time shifting
still. Recording is still under way and other
time shifting operation (FF, REW, etc) works
properly.
Timer Recording using Manual Set
Record Screen
The Timer Recording function allows you to record
up to 8 programs within a period of one month.
1 Insert recordable media such as DVD±R,
DVD±RW if you are recording to DVD.
2 Press [TIMER].
The ‘Select Record Method’ menu appears.
Select Record Method
Please choose your preferred
method for scheduling a recording
Manual edit timer
VideoPlus
Timer Recording
PR No. Date Start End Mode
Instructions:
---- --/-- --:-- --:-- --Enter-Confirm Setup-Exit Move …†
---- --/-- --:-- --:-- ------ --/-- --:-- --:-- ------ --/-- --:-- --:-- ------ --/-- --:-- --:-- ------ --/-- --:-- --:-- ------ --/-- --:-- --:-- ------ --/-- --:-- --:-- --Instructions:
Playing under recording
1
Press [MENU] to play DVD or HDD during
recording. Then Media Browser appears.
2
In Media Browser, Select and play the media
you want to view among HDD and DVD.
• You can’t play a DVD disc during DVD
recording.
• The maximum number of titles that can be
recorded on the HDD is 254.
• Using the HDD allows you to record a
maximum of 10 hours continuously.
Enter-Edit Setup-Exit Move …†
3 Select ‘Manual edit timer’ with […/†] and confirm
with [ENTER].
•
•
•
•
•
•
•
42
Downloaded From Disc-Player.com Daewoo Manuals
The ‘Timer Recording’ menu appears.
Use […†] to move to a timer recording slot,
and press [ENTER] to modify it.
If you did not set the clock on the HDD/DVD
Recorder, you must do so before programming a
timer recording.
Media - Choose desired media (DVD or HDD)
using […†].
PR No. – Choose the desired channel, or one of
the external inputs from which to record.
Date – Choose a date up to 1 month in
advance, or select a daily or weekly program.
Start Time – Set the recording start time.
End Time – Set the recording end time.
Mode – Choose a Record mode.
HQ, SP, SLP or EP
Repeat-Choose frequency of the recording.
Once, Daily, Weekly, Weekday.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 43
mac001
1200DPI 100LPI
Timer Recording
4 Enter the necessary information for your Timer
Recording(s).
• œ √ – Moves the cursor left/right.
• …† – Changes the setting of the current
cursor position.
• Press [SETUP] to exit the Timer Record menu.
• Press [ENTER] after filling in all the program
information.
• Press [TIMER] to display the Timer Record List.
Edit Timer
Media
PR No.
Date
Start
End
Mode
Repeat
Delete
Instructions:
PR-03
02/Jan Sun
13:30
14:30
HQ
Once
finishes to confirm the recorded program. If
two timer recordings are set to record
sequentially (one right after the other), the very
beginning of the later program may not be
recorded.
Timer Recording using VideoPlus
system
Thanks to this programming system, you no longer
need to tediously enter the date, programme
number, start and end time. All the information
needed by the HDD/DVD Recorder for programming
is contained in the VideoPlus programming number.
This VideoPlus number is found in most TV listings.
1 Insert recordable media such as DVD±R,
Enter-Save Setup-Exit
5 Press [ENTER] to save the program.
The Timer Record List will appear.
DVD±RW if you are recording to DVD.
2 Press [TIMER].
The ‘Select Record Method’ menu appears.
Timer Recording
PR No. Date Start
PR-03 02/01 13:30
---- --/-- --:----- --/-- --:--
End Mode
14:30 HQ
--:-- ----:-- ---
must power off the HDD/DVD Recorder to start
the Timer Recording.
• The Timer indicator lights on the front panel
display when the HDD/DVD Recorder is ready
for the Timer Recording.
• The timer indicator will flash if any of the
following conditions occur;
- Empty or non-recordable disc is found in the
tray when DVD Timer recording starts.
- When you go into Media browser, SETUP,
Timer Recording menu after Timer Recording
setup.
- When you record the TV signal after Timer
Recording setup.
- When you play titles after Timer Recording
setup.
• The HDD/DVD Recorder will automatically
power off when the Timer Recording ends.
• There is a short delay when a timer recording
Please choose your preferred
method for scheduling
Manual edit timerVideoPlus
VideoPlus
Please enter your VideoPlus Code.
Instructions:
–––––––––
Enter-Confirm Setup-Exit Move …†
3 Select ‘VideoPlus’ with […/†] and confirm with
[ENTER].
The ‘VideoPlus’ menu appears.
Enter the entire ‘VideoPlus’ number. This
number is up to 9 digits long and can be found
next to the start time of the TV programme in
your TV listings magazine.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the ‘VideoPlus’ number.
If you make a mistake, you can clear it with
[CLEAR].
4 Press [ENTER] to confirm.
43
Downloaded From Disc-Player.com Daewoo Manuals
RECORDING
6 Press [SETUP] to exit the Timer Record List.
7 Timer indicator will light or start blinking. You
Select Record Method
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 44
mac001
1200DPI 100LPI
Timer Recording
5
The decoded information appears after
confirmation. You can go back at any time to
change the information by pressing [ENTER].
Select the appropriate input field using […†].
If required, change the information using
[…†].
If all the information is correct, press the
[ENTER] button. The programming information
is stored in a TIMER block.
Timer Recording
PR No. Date Start
PR-03 02/01 13:30
---- --/-- --:----- Edit
--/---:-Timer
---- Media
--/-- --:----- --/-- --:-No. --:----- PR--/----- Date
--/-- --:-Start
---- --/-- --:-End
Instructions:
Mode
Enter-Edit
Setup-Exit
Repeat
Delete
Instructions:
End Mode
14:30 HQ
--:-- ----:-- ----:-- ----:-- --PR-03
--:-- ----:--02/Jan
--- Sun
13:30
--:-- --14:30
HQ
Move …†
Once
Enter-Save Setup-Exit
6 Press [SETUP] to exit the Timer Record List.
7 Timer indicator will light or start blinking. You
must power off the HDD/DVD Recorder to start
the Timer Recording.
Timer Recording Troubleshooting
Even if a Timer Recording is set, the HDD/DVD
Recorder will not record if:
• No disc is loaded.
• A non-recordable disc is loaded.
• ‘Lock Disc’ is set to ON in the DISC Settings
menu; see page 54.
• There are already 49 titles recorded on the disc
or 254 titles recorded on the HDD.
You cannot enter a Timer Recording if:
• A recording (dubbing, copying) or playing titles
is already under way.
• The start time has already passed.
• Eight Timer Recordings have already been set.
If two or more Timer Recordings overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later
program starts.
• If two programs are set to start at exactly the
same time, the program entered first takes
priority.
Confirmation is not possible when:
• The DISC Lock setting is set to ON.
• There are already 49 titles recorded on the disc
or 254 titles recorded on the HDD.
VideoPlus is not available for some countries.
Canceling a Timer Recording
You can clear a Timer Recording any time before
the recording actually starts.
• Use […†] to select the program you want to
erase on the Timer Recorder List, then press
[ENTER] to modify it. Use [œ √] to select
'Delete' then press [ENTER].
Or just press [CLEAR] on the Timer Recorder
List.
Stopping a Timer Recording in
Progress
After a Timer Recording has started, you can still
cancel the program by pressing and holding [STOP]
for 5 seconds.
44
Downloaded From Disc-Player.com Daewoo Manuals
If the disc is damaged, the recording may not
complete successfully, even if the Check field
shows ‘Rec. OK‘.
Recording Priority
• Timer Recording and OTR (One Touch Record)
have the same priority but they have lower
priority than manual recording. During manual
recording, Timer Recording or OTR will be
ignored.
The cooling fan continues to work when a Timer
recording is set and VPS/PDC is turned ON,
because the HDD/DVD Recorder has to get time
data from the station.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 45
mac001
1200DPI 100LPI
Recording from an External Input
Recording from External Components
You can record from an external component, such
as a camcorder, VCR or Digital Camera, connected
to any of the HDD/DVD Recorder’s external inputs.
1 Make sure the component you want to record
from is connected properly to the HDD/DVD
Recorder; see pages 15~17.
2 Use [PR+/–] or [INPUT] to select the external input
3
to record from.
Load a recordable disc if you are recording onto
a DVD. And then select HDD or DVD to record.
When you load a new, blank recordable disc
(DVD±RW, DVD±R), the recorder will take a
moment to initialize it for recording.
DV Input screen appears. Then, if you select
'Yes', it will be changed to DV input.
3 Find the place on the camcorder tape from which
you want to start recording.
For best results, pause playback at the point
you want to start recording.
4 Press [REC] once to start recording.
Recording is automatically paused if the
HDD/DVD Recorder detects no signal. You can
pause or stop the recording by pressing
[PLAY/PAUSE] or [STOP].
You can select media you want to record as
pressing the [DVD] or [HDD].
4 Set the desired Recording mode by pressing [REC
SPEED] repeatedly.
Available disc (or HDD) space will be displayed
by selecting recording mode.
5 Press [REC (●)] once.
Recording will start. The REC indicator lights on
the front panel display.
Recording continues until you press [STOP] or
the disc (or HDD) is full.
To record for a fixed length of time, see ‘One
Touch Record‘ on page 40.
6 Press [STOP (■)] to stop recording.
RECORDING
• If your source is copy-protected, you will not be
able to record it using the HDD/DVD Recorder.
See ‘Copyright Notice‘ on page 8 for more
details.
Recording from a Digital Camcorder
You can record from a digital camcorder connected
to the DV IN jack on the front panel of the
HDD/DVD Recorder.
1 Make sure your digital camcorder is connected to
the front panel DV IN jack; see page 17.
2 Press [DV] to select the DV input.
DV Input
This will stop the Timeshifting
Buffer. Proceed?
Yes
No
Instructions:
Enter-Confirm Setup-Exit Move …†
45
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 46
mac001
1200DPI 100LPI
Dubbing
Dubbing will copy the selected titles (+VR format)
with the same properties (title name, duration,
index picture, chapter mark) in HDD Videos to
DVD or vice versa.
The Media BROWSER can not be activated in the
middle of dubbing, that means play, stop, any edits
does not work.
Dubbing from HDD to DVD
1 Prior to selecting titles for dubbing, you need to
HDD to DVD Dubbing
Add
Start Dubbing
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---5. Title PR-05 ---6. Title PR-06 ---Dub : 0 Titles
7. Title PR-06 ---8. Title PR-06 ---9. Title PR-06 ---10. Title PR-06 ---HDD Space : 99% 13 Titles
1/13 …†
Move-…†œ √HDD
Select-ENTER
Back-MENU
Exit-SETUP
to DVD
Dubbing
insert a recordable disc into the tray.
Add
Start Dubbing
The DVD+HDD Combination may take a few
moments to format the disc if it is used for the
first time, determine compatibility and free
recordable space. During this time you will see
the Disc Loading logo.
Dub : 1 Titles
2 Press [DUB], then 'Media Dubbing' appears.
You can see the titles in your HDD browser and
will select them to be dubbed to DVD.
HDD to DVD Dubbing
This will dub 1 title(s)
The Time Shift Buffer will stop
Continue?
Yes
No
HDD Space : 99% 13 Titles
1/13 …†
Move-…†œ √ Select-ENTER Back-MENU Exit-SETUP
HDD to DVD
Dubbing Completed
3 Select 'HDD to DVD' using […†] and press
[ENTER].
4 Select the title you want to dub using […†] and
press [ENTER] to add.
Then select more titles using […†] and press
[ADD].
Repeating the same process, you can add many
titles.
You can see charged space you selected in
DVD with progress bar in red, also how many
titles you selected to be dubbed and free space
in DVD.
5 If you select all the titles you want to dub, select
‘Start Dubbing’ using […†].
Press [ENTER] to confirm, then Dubbing will be
started.
Media Dubbing
HDD to DVD
DVD to HDD
HDD to DVD Dubbing
Date : 22/06/05
Time : 11/16
Length : 00:13
Quality : HQ
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---5. Title PR-05 ---6. Title PR-06 ---Dub : 0 Titles
7. Title PR-06 ---Move-…†œ √ Select-ENTER Back-MENU
8. Title Exit-SETUP
PR-06 ---9. Title PR-06 ---10. Title PR-06 ---HDD Space : 99% 13 Titles
1/13 …†
Move-…†œ √ Select-ENTER Back-MENU Exit-SETUP
46
Downloaded From Disc-Player.com Daewoo Manuals
When dubbing process is completed, the tray will
be open automatically.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 47
mac001
1200DPI 100LPI
Media files Copying
Dubbing from DVD to HDD
1 Prior to selecting titles for dubbing, you need to
insert a disc to be dubbed into the tray.
Press [DUB], then 'Media Dubbing' appears.
2
3 Select 'DVD to HDD'' using […†] and press
[ENTER].
4 Select the title you want to dub using […†] and
press [ENTER] to add.
Then select more titles using […†] and press
[ADD].
Repeating the same process, you can add many
titles.
5 If you select all the titles you want to dub, select
‘Start Dubbing’ using […†].
Press [ENTER] to confirm, then Dubbing will be
started.
Media Dubbing
HDD to DVD
DVD to HDD
Copying and Editing media file (DVD,
HDD)
Copying will copy the media files (jpg, mp3, DivX)
in HDD Media to DVD, or vice versa.
HDD Media to HDD Media copy (DVD to DVD) is
also available.
If you want to copy media files on your DVD to HDD,
these files will be saved in each category (HDD
Pictures, Music, DivX) of HDD Media and they
cannot be saved in HDD Video.
The folders in the HDD media browser can be
viewed in any category, but the jpg files in folders
can only be viewed in HDD Pictures.
Mp3, DivX files in the folder can only be viewed in
the same way and either in DVD Media browser.
If you want to copy media files in HDD Media to
your DVD, Disc recorded with DVD Video format
cannot be supported.
Media BROWSER can not be activated in the middle
of Copying, that means play, stop, any edits do not
work.
1 Select the desired media to copy from.
Then enter the HDD Media Browser (or DVD
Media Browser).
DVD to HDD Dubbing
Date : 22/06/05
Time : 11/16
Length : 00:13
Quality : HQ
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---Move-…†œ √ Select-ENTER Back-MENU
5. Title Exit-SETUP
PR-05 ---DVD6.toTitle
HDD
Dubbing
PR-06
---Title PR-01 ---Dub : 0 TitlesAdd 7. Title PR-061.---Start8.Dubbing
Title PR-02 ---Title PR-062.---Title PR-03 ---9. Title PR-063.---4. Title
10. Title PR-06
---- PR-04 ---5. Title PR-05 ---DVD Space : 99% 13 Titles 6.1/13
…† ---Title PR-06
DVD to :HDD
Dubbing
0 Titles
7. Title
PR-06 ---Move-…†œ √ Dub
Exit-SETUP
Add Select-ENTER Back-MENU
8. Title PR-06 ---Start Dubbing DVD 9.
to Title
HDD PR-06
Dubbing
---This will
dub 1PR-06
title(s)
10. Title
---The Time Shift Buffer will stop
DVD Space :Continue?
99% 13 Titles
1/13 …†
Yes
Select-ENTER Back-MENU Exit-SETUP
Dub :Move-…†œ
1 Titles √ No
Use […†] to select HDD (DVD) Pictures, HDD
(DVD) Music or HDD (DVD) Divx, then press
[ENTER].
HDD Media Browser
HDD Pictures
HDD Music
HDD DivX
55 Pictures Files
DVD Browser
DVD Pictures
DVD Music
DVD DivX
1/13 …†
to HDD
Move-…†œ √ Select-ENTER DVD
Back-MENU
Exit-SETUP
55 Pictures Files
Dubbing Completed
2
If you want to edit a folder including copy,
select the folder you want to edit using […†]
and press [EDIT].
- Create Folder : Create folder where you want
- Delete Folder
47
Downloaded From Disc-Player.com Daewoo Manuals
RECORDING
DVD Space : 99% 13 Titles
Press [MENU] to enter the HDD Media Browser
(or DVD Media Browser).
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 48
mac001
1200DPI 100LPI
Media files Copying
- Copy Folder : Copy folders including all files in
the folder.
- Rename Folder
HDD Music
Create Folder
Delete Folder
Copy Folder
Rename Folder
DVIX/
1/
MU/
02_LIVIN ON PRAYER.MP3
Select the title you want to copy using […†]. Then
select 'Edit‘ using […†] and press [ENTER].
HDD Music
6 After selecting the destination to be copied, select
'Copy here' and press [ENTER].
Select 'YES' and press [ENTER] to confirm, the
Copy process will be started.
Copy Completed
Play
View Info
Edit
DVIX/
1/
MU/
02_LIVIN ON PRAYER.MP3
HDD Music
DVIX/
1/
4/4 …†
MU/
02_LIVIN ON PRAYER.MP3
Move-…†œ √ Select-ENTER Back-MENU Exit-SETUP
4572 MB Free
- Open : Open the media and folder you want to
copy to.
- Copy Here : Copy to the media immediately
after confirmation message.
- Create folder : Create folder in the media you
want to copy to.
Whole copy process is displayed with a
percent unit on the upper right corner.
Delete
Copy
4Create
ItemsFolder
3 Select 'Copy‘ using […†] and press [ENTER]. Or
If you press [DISPLAY] button, progress bar per
each file (or folder) is displayd on the lower
part.
just press [DUB].
Using the same procedure as Dubbing, repeat
the process; select the titles using […†] and
press [ADD], you can add as many titles you
want. ‘Media Copy’ will appear.
4 Select 'Done' and press [ENTER] after selecting all
the titles you want to copy, and then 'Media
Copy - Select Destination' appears.
5 Select the media you want to copy to and press
[ENTER].
HDD Media Copy
Remove
Done
Copy : 1 files
7MB
DVIX/
1/
MU/
02_LIVIN ON PRAYER.MP3
HDD Media Copy - Select Destination
Open
HDD
Copy Here
DVD
4 Items
4/4 …†
Create Folder
Move-…†œ √ Select-ENTER Back-MENU Exit-SETUP
Copy : 1 files
296 KB
4572 MB Free
48
Downloaded From Disc-Player.com Daewoo Manuals
• DivX copy works only in Divx model.
• To format a DVD±RW disc that contains
media files (mp3, jpg, DivX), press [SETUP] to
return to DVD-EE MODE. Press [REC] and then
[YES] to confirm, the disc format will be
started.
• When the copy process is completed the tray
will open automatically.
• HDD Media (Picture,Music,DivX) capacity is
limited to 10% of HDD. (Approx. 16GB for
160GB Model, 25GB for 250GB Model)
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 49
mac001
1200DPI 100LPI
HDD Playback and Editing
This section explains various functions of HDD editing.
At first, go to ‘HDD Videos’ mode.
1 Press [HDD] to select HDD
Or press [PLAY/PAUSE] to play the title.
6
To stop playback at any time, press [STOP].
Then it will return to media browser.
7
To leave the media browser mode, press
[SETUP].
mode.
HDD Selected
Actions are now for
HDD
√ Live
Still Picture and Frame-by-Frame Playback,
Fast Forward/Backward, Slow Motion,
Zoom, A-B, Search , Selecting Titles
2
Press [MENU] to enter the
media browser.
Same with ‘DVD Playback’. (Fast rewind : x4, x8,
x16, x32)
3
While ‘HDD Videos‘ is selected, press [ENTER]
to go to the ‘HDD Videos’ page.
Repeat
Media Browser
HDD Videos
HDD Media
DVD
Multimedia files
HDD Videos
Date : 22/06/05
Time : 11/16
Length : 00:13
Quality : HQ
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---Move-…† Select-ENTER Back-MENU
Exit-SETUP
5. Title PR-05
---6. Title PR-06 ---7. Title PR-06 ---8. Title PR-06 ---9. Title PR-06 ---10. Title PR-06 ---Free Space : 99% 13 Titles
1/13 …†
Playing a HDD title
Follow these instructions to play back a scene from
the Title List.
Select the title to playback using [ENTER].
Then select ‘Play‘ using [… †]. Press [ENTER]
to play the title.
HDD Videos
Play
Delete
Edit
Sort
Dubbing
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---5. Title PR-05 ---6. Title PR-06 ---7. Title PR-06 ---8. Title PR-06 ---9. Title PR-06 ---10. Title PR-06 ---Free Space : 99% 13 Titles
1/13 …†
Move-…† Select-ENTER Back-MENU
Follow these instructions to delete a title from the
Title List.
4
5
6
7
Select the title to be erased using [ENTER].
Then select ‘Delete‘ using [… †].
Press [ENTER] to erase the title.
Select 'Yes' and press [ENTER] to confirm.
HDD Videos
Play
Delete
Edit
Sort
Dubbing
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---5. Title PR-05 ---6. Title PR-06 ---7. Title PR-06 ---HDD Videos
8. Title PR-06
----PR-01 ---Play
1. Title
----PR-02 ---Delete 9. Title PR-06
2. Title
10. Title PR-06
Edit
3. Title---PR-03 ---PR-04
---Free SpaceSort
: 99% 13 Titles 4. Title
1/13
…†
Dubbing
5.
Title
PR-05 ---Move-…† Select-ENTER Back-MENU
6. Title PR-06 ---7. Title PR-06 ---8. Title PR-06 ---HDD Videos
9. Title PR-06 ---Play
10. Title PR-06 ---Delete
Delete Title
Free Space
:
99%
13 TitlesAre you1/13
…†
Edit
sure you
want to delete?
Move-…†Sort
Select-ENTER Back-MENU
Dubbing
YES
NO
Free Space : 99% 13 Titles
1/13 …†
Move-…† Select-ENTER Back-MENU
49
Downloaded From Disc-Player.com Daewoo Manuals
EDITING
4
5
Deleting a HDD title
RECORDING
Move-…† Select-ENTER Back-MENU Exit-SETUP
While playing the HDD, each press of the [REPEAT]
button changes the repeat mode as follows:
Chapter ➝ Title ➝ Disc ➝ off ➝ Chapter ...
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 50
mac001
1200DPI 100LPI
HDD Playback and Editing
Editing a HDD title
Renaming (Labeling) a Title
Follow these instructions to rename a title list
name,i.e., to edit the title of a recorded program.
4
5
6
7
8
9
Select the title to be labeled using [ENTER].
Select ‘Edit’ using [… †] .
Press [ENTER] to go to submenu.
Select ‘Name’ using [… †] .
Press [ENTER] to change the title name.
4
5
6
7
8
9
10
11
The Keyboard Menu will be displayed. Use [œ
√…†] to select a character or function and
press [ENTER].
Play
Delete
Edit
Sort
Dubbing
1/13 …†
Move-…† Select-ENTER Back-MENU
Parental Lock
This menu will appear only when you set to 'On' in
'Setup - Preferences - Parental Controls - Set Hdd
Parental Lock' menu.
When you lock a program, the parental password
selected in the Setup menu will be used.
The user will be asked to Unlock the program before
Play or any Edit or Dubbing operation.
50
Downloaded From Disc-Player.com Daewoo Manuals
Select ‘Parental Lock’ using [… †] .
Press [ENTER] to lock the title.
If you enter the password, the title is locked.
Lock icon ‘
’ will appear in front of Title name.
To ‘Unlock’ the title, select ‘Unlock’ in step 7.
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---5. Title PR-05 ---6. Title PR-06 ---7. Title PR-06 ---8. Title PR-06 ---9. Title PR-06 ---HDD Videos
10. Title PR-06
----PR-01 ---Date : 22/06/05
1. Title
Time
:
11/16
Free Space : 99% 13 Titles 2. Title
1/13PR-02
…†---Length : 00:13 3. Title PR-03 ---Move-…† Quality
Select-ENTER
: HQ Back-MENU
4. Title PR-04 ---5. Title PR-05 ---6. Title PR-06 ---7. Title PR-06 ---8. Title PR-06 ---9. Title PR-06 ---10. Title PR-06 ---Free Space : 99% 13 Titles
1/13 …†
HDD Videos
Free Space : 99% 13 Titles
Press [ENTER] to go to submenu.
Name
Parental Lock
Unprotect
Video Edit
After the new title name is complete, select
‘SAVE’ and press [ENTER].
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---5. Title PR-05 ---6. Title PR-06 ---HDD Videos
7. Title PR-06 ------- PR-01 ---Name 8. Title PR-06
1. Title
Title PR-06
---- PR-02 ---Parental9.Lock
2. Title
10. Title PR-06
----PR-03 ---Unprotect
3. Title
Free Space Video
: 99% Edit
13 Titles 4. Title
1/13PR-04
…†---5. Title PR-05 ---Move-…† Select-ENTER Back-MENU
6. Title PR-06 ---Title PR-06 ---HDD7.
Videos
8. Title PR-06 ---Name9. Title PR-06 ---Title PR-01 ---Parental
10. Lock
Title PR-06 ---Unprotect
CLR SP DEL SAVE
Free Space : 99%
Titles 1 1/13
Video13
Edit
2 3 4…†
5 6 7 8 9 0
AB C DE F G H I J
Move-…† Select-ENTER Back-MENU
K LMNO PQ R ST
UVWXY Z ( ) . ,
: ; & !
Select ‘Edit’ using [… †] .
HDD Videos
CLR : Clear the title name / SP : Space / DEL :
Delete a character / SAVE : Save the title name
10
Select the title to be locked using [ENTER].
Move-…† Select-ENTER Back-MENU
Protecting a Title
If you want to protect a title from accidental
recording, editing, or erasing, you can protect the
title. Later, if you change your mind, you can
unprotect the title.
4
5
6
7
8
9
Select the title to be protected using [ENTER].
10
To ‘Unprotect’ the title, select ‘Unprotect’ in
step 7.
Select ‘Edit’ using [… †] .
Press [ENTER] to go to submenu.
Select ‘Protect’ using [… †] .
Press [ENTER] to protect the title.
Protect icon will appear at the back of Title
name.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 51
mac001
1200DPI 100LPI
HDD Playback and Editing
• Hide Chapter :
HDD Videos
Name
Parental Lock
Protect
Video Edit
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---Title PR-05 ---HDD5.Videos
Title PR-061.---Date 6.
: 22/06/05
Title PR-01 ---Title PR-062.---Time7.: 11/16
Title PR-02 ---8. :Title
PR-063.---Length
00:13
Title PR-03 ---9.
Title
PR-06
---Quality : HQ
4. Title PR-04 ---10. Title PR-06
---- PR-05 ---5. Title
Title…†
PR-06 ---Free Space : 99% 13 Titles 6.1/13
7. Title PR-06 ---Move-…† Select-ENTER Back-MENU
8. Title PR-06 ---9. Title PR-06 ---10. Title PR-06 ---Free Space : 99% 13 Titles
1/13 …†
Move-…† Select-ENTER Back-MENU
Use to hide or unhide chapter markers in the
title. Depending on whether a chapter is
currently hidden or unhidden, one of the
following options will be available :
Hide : press [ENTER] to hide the current chapter
during playback.
Unhide : press [ENTER] to unhide the current
chapter during playback.
Note : You can use this feature to remove
commercials during playback by inserting chapter
markers at the start and end of a commercial
interruption and hiding the chapter created.
• Change Index Picture :
Use to edit the title index picture. When
highlighted by pressing [ENTER], the image on
the screen is used as the new title index
picture.
Editing a Title
4 Select the title to be edited using [ENTER].
5 Select ‘Edit’ using [… †] .
6 Press [ENTER] to go to submenu.
7 Select ‘Video Edit’ using [… †] .
8 Press [ENTER] to go to HDD Edit menu.
9 The HDD Edit Menu will be displayed.
• Split Title :
Use to divide the title into two separate titles.
When highlighted by pressing [ENTER], the
current title is divided into two separate titles
at the point where [ENTER] is pressed.
HDD Videos
Name
Parental Lock
Unprotect
Video Edit
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---5. Title PR-05 ---6. Title PR-06 ---7. Title PR-06 ---HDD8.Edit
Title PR-06 ---Title9. Title PR-06 ---1 of 2
10. Title PR-061 ---Chapter
of 11
Edit 13
Chapters
Free Space : 99%
Titles
1/13 …†
• Title :
Press [ENTER] and select the title you want to
edit using [… †].
Hide Chapter
Change Index Picture
Split Title
• Chapter :
Move-…† Select-ENTER Back-MENU
Press [ENTER] and select the chapter you want
to edit using [… †].
Instructions:
Enter-Confirm Setup-Exit
Move …†
Use to create, delete and edit chapter markers
in the title. Use the cursor button to choose one
of the following options :
Add : when highlighted, creates a new chapter
marker at the point in the title where [ENTER] is
pressed.
Delete : when highlighted and [ENTER] is
pressed, deletes the last chapter that was
created in the title.
Delete all : when highlighted and [ENTER] is
pressed, deletes all chapter markers within the
title.
•
•
•
Please note that any edits made will not be in
effect until [MENU] or [STOP] button is
pressed. During this time, the HDD/DVD
Recorder will update the title with the edits
made. Once the update is complete, the edits
will be available the next time the title edited
is played back.
Press [MENU] or [STOP] to exit from editing
menu.
You can enter into HDD Edit menu directly by
pressing [EDIT] button.
51
Downloaded From Disc-Player.com Daewoo Manuals
EDITING
• Edit Chapters :
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 52
mac001
1200DPI 100LPI
HDD Playback and Editing
Sorting a HDD title
Dubbing a HDD title to DVD disc
Follow these instructions to sort a title from the
Title List by varying the order.
Follow these instructions to copy the title(s)
selected with the same properties (title name,
duration, index picture, Lock, Chapter Mark)
information over to DVD.
4
5
6
7
8
Select the title to be sorted using [ENTER].
Then select ‘Sort‘ using [… †].
Press [ENTER] to go to submenu.
Select ‘Record Date’ using [… †] .
4
5
6
Select the title to be dubbed using [ENTER].
7
The ‘HDD to DVD Dubbing’ Menu will be
displayed. For more detailed information about
‘HDD to DVD Dubbing’ procedure, go to page
46.
Press [ENTER] to sort the list by record date.
Record Date : sorts by record date.
Alphabetical : sorts by alphabetical order.
Delete Order : sorts by record date and displays
protected titles at the end.
Protected : sorts by protected titles.
HDD Videos
Play
Delete
Edit
Sort
Dubbing
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---5. Title PR-05 ---HDD6.Videos
Title PR-06 ---7. Title
Record
Date PR-061.---Title PR-01 ---8. Title PR-062.---Alphabetical
Title PR-02 ---9. Order
Title PR-063.---Delete
Title PR-03 ---10. Title PR-06
---- PR-04 ---Protected
4. Title
Title…†
PR-05 ---Free Space : 99% 13 Titles 5.1/13
6. Title PR-06 ---Move-…† Select-ENTER Back-MENU
7. Title PR-06 ---8. Title PR-06 ---9. Title PR-06 ---10. Title PR-06 ---Free Space : 99% 13 Titles
1/13 …†
Move-…† Select-ENTER Back-MENU
52
Downloaded From Disc-Player.com Daewoo Manuals
Then select ‘Dubbing‘ using [… †].
Press [ENTER] to go to ‘HDD to DVD Dubbing’
menu.
HDD Videos
Play
Delete
Edit
Sort
Dubbing
1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---5. Title PR-05 ---6. Title PR-06 ---Title
PR-06
---HDD7.
to
DVD
Dubbing
8. Title PR-06 ---Date 9.
: 22/06/05
Title PR-01 ---Title PR-061.---Time10.
: 11/16
2. Title
Title PR-06
---- PR-02 ---Length : 00:13 3. Title PR-03 ---Free Space : 99%
13 :Titles
Quality
HQ
4.1/13
Title…†
PR-04 ---5. Title PR-05 ---Move-…† Select-ENTER Back-MENU
6. Title PR-06 ---Dub : 0 Titles
7. Title PR-06 ---8. Title PR-06 ---9. Title PR-06 ---10. Title PR-06 ---Free Space : 99% 13 Titles
1/13 …†
Move-…† Select-ENTER Back-MENU
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 53
mac001
1200DPI 100LPI
Disc Manager
This section explains edit functions for the entire disc and for the titles in the disc.
At first, go to ‘Disc Menu’ mode.
1 Press [MENU] to go to ‘Disc Menu’ menu.
2 If you want to display ‘Title Edit’ menu, press
[√] in ‘Disc Menu’ menu. Go to ‘Title Editing’
on page 56~57.
3
If you want to display ‘Disc’ top menu, press
[…] in ‘Disc Menu’ menu. The Disc top Menu
shows you disc information, such as disc type,
number of recordings, total titles, free space,
etc.
4
If you want to display ‘Disc Edit’ menu, press
[√] ‘Disc’ top menu. Go to ‘Disc Editing’ on
page 53~55.
1
2
3
…
†
1. TITLE
02/01/2004
03:24:48
HQ 00:03:21
2. TITLE
02/01/2004
03:24:48
SP 00:01:12
EMPTY TITLE
Disc Editing in DVD±RW disc
At first, go to ‘Disc Edit’ mode.
Press
[MENU]
then
√
For recordable DVD media, such as DVD±R and
DVD±RW discs, you can manage the disc using the
Disc Menu.
The DVD±R Disc Menu allows you to rename your
disc or finalise it so it will be compatible with most
other DVD players.
The DVD±RW Disc Menu allows you to erase, lock,
or unlock your disc. You can also make it compatible
with most other DVD players.
EMPTY
√
Play Title
†
MY DVD
DVD
Press [Enter] to begin
playback of title.
NTSC
EMPTY
Instructions:
Enter-Confirm
02/01/2004
√
06:43:08
Press [√]. ‘Disc Edit’ menu will be displayed.
The Disc ‘Information’ Menu shows you disc
information, such as disc type, number of
recordings, total titles, free space, etc.
…
Step1] ‘Disc Menu’ menu
NTSC
Press […]. ‘Disc’ Top menu will be displayed.
Disc Information
4 Use [œ/√] to select the ‘Information’ menu.
Press
[√] then
Press
[…] then
Press [MENU] to go to ‘Disc Menu’ menu.
DVD
Step2] ‘Title Edit’ menu
EDIT
EDIT
†
Press
[√] then
EDIT
†
Type
DVD+RW
Recordings
5
Total Title 00:57:57
Free Space 01:48:48
Finalized
Locked
No
Compatible
Yes
Instructions:
Setup-Exit
NTSC
DVD
Information
√
EDITING
Step3] ‘Disc’ top menu
†
√
Information
Type
Recordings
Total Title
Free Space
Finalized
Locked
Compatible
DVD+RW
5
00:57:57
01:48:48
No
Yes
Instructions:
Setup-Exit
Erase the disc (DVD±RW)
4 Use [œ/√] to select ‘Erase the disc’ menu.
5 If you want to erase the whole disc, press
[ENTER].
Step4] ‘Disc Edit’ menu
6
To confirm, select ‘Yes‘. To cancel, select ‘No‘.
If you select ‘Yes‘ and press [ENTER], all the
contents of the disc will be lost.
53
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 54
mac001
1200DPI 100LPI
Disc Manager
Make Compatible
Erase the disc
Press [Enter] if you want
to erase the disc.
All the disc
Erase
existing recordings will
be cleared. Erase the disc?
All recordings will be lost.
Yes
No
'Make Compatible' for a DVD+RW will
automatically create a menu screen for navigating
the disc. This menu screen is accessible by pressing
[TITLE].
4
Use [œ/√] to select ‘Make Compatible‘ for
DVD+RW. Press [ENTER] as shown on the
screen.
5
Select 'Yes' using […] and press [ENTER] to
make the disc compatible.
6
7
Press [ENTER] again.
Instructions:
Enter-Confirm
Instructions:
Enter-Confirm Move …†
DVD±R discs cannot be locked (unlocked) or
erased.
Press [SETUP] to go to the top disc menu.
Lock/Unlock Disc (DVD±RW)
If you want to protect a disc from accidental
recording, editing, or erasing, you can lock the disc.
Later, if you change your mind, you can unlock the
disc.
4
5
6
7
Use [œ/√] to select
‘Lock/Unlock Disc’. Press
[ENTER] as shown on the
screen.
You can see the current
disc status (Locked or
Unlocked).
Make Compatible
Press [Enter] to lock the
disc. This prevents future
disc operations or
recordings.
Instructions:
Enter-Confirm
Lock/Unlock Disc
Disc is unlocked.
Do you want to lock it?
Yes
No
Lock/Unlock Disc
Changing disc lock status.
Instructions:
PleaseMove
wait…†
a moment....
Enter-Confirm
54
Downloaded From Disc-Player.com Daewoo Manuals
Press [Enter] to make any
previous title editing
compatible with your DVD
player.
Lock/Unlock Disc
You can change the disc status by selecting
‘Yes‘ and pressing [ENTER]. The ‘Changing Disc
Status’ bar will appear. This process takes a
few seconds.
After the process
is finished the
menu disappears
automatically.
Make Compatible
Instructions:
Enter-Confirm
Make disc compatible with
your DVD player.
Yes
No
Make Compatible
Finished.
This Disc should already
be compatible.
ok
Instructions:
Enter-Confirm Move …†
Instructions:
Enter-Confirm Move …†
• ‘Make Compatible’ can take up to 3-4 minutes
depending on the type of disc, how much is
recorded on the disc, and the number of titles
on the disc.
• If you do not make your DVD+RW disc
compatible, your edits will not be recognized
by other DVD players.
• It may take over 7 minutes for finalizing the
edited disk, you must wait till the set finishes
the finalizing operation.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 55
mac001
1200DPI 100LPI
Disc Manager
Disc Editing in DVD±R, DVD-RW disc
Change Disc Name
You can rename your disc to any name you choose.
The default disc name is ‘MY DVD‘.
4
Use [œ/√] to select ‘Change Disc Name‘. Press
[ENTER] as shown on the screen.
5
6
The Keyboard Menu appears.
Finalising a DVD±R (or DVD-RW) ‘locks’ its
recordings in place so the disc can be played on
most standard DVD players or computers equipped
with DVD-ROM drives.
4
Use [œ/√] to select ‘Finalise Disc‘ for a DVD±R
(or DVD-RW). Press [ENTER] as shown on the
screen.
5
Select 'Yes' using […] and press [ENTER] to
finalise the disc.
6
7
Press [ENTER] again.
Use [œ √…†] to select and press [ENTER] to
enter the name of the disc.
CLR : Clear the disc name / SP : Space / DEL :
Delete a character / SAVE : Save the disc name
7
8
Finalise
Press [ENTER] again.
To save the name of the disc, select ‘SAVE‘ and
press [ENTER].
If ‘Lock Disc’ is set to ‘On’ in the DISC Settings
menu, you cannot rename your disc; see page 54.
Change Disc Name
Press [SETUP] to go to the top disc menu.
Once you have finalised a DVD±R (or DVD-RW) disc,
you cannot edit or record anything else on that disc.
Finalise Disc
Finalise Disc
Press [Enter] if you want to
finalise the disc.
No changes can be made
afterwards. Continue?
Yes
No
Instructions:
Enter-Confirm
Instructions:
Enter-Confirm Move …†
Press [Enter] to change
the disc name.
Change Disc Name
MY DVD
CLR SP
1 2 3 4 5
ABC D E
Instructions:
Enter-Confirm K L M N O
U VW X Y
: ; &
DEL
6 7
F G
P Q
Z (
SAVE
Disc Name
8 9 Change
0
H I Problem.
J
R S This
T disc is locked. It
) . cannot
,
be renamed.
ok
Enter-Confirm Move …†
Instructions:
Enter-Confirm Move …†
EDITING
55
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 56
mac001
1200DPI 100LPI
Disc Manager
Title Editing
You can manage the titles on your DVD±R/±RW
discs using the Title menu.
At first, go to ‘Title Edit’ mode.
1
2
Press [MENU] to go to ‘Disc Menu’ menu.
3
Press [√]. ‘Title Edit’ menu will be displayed.
Select the desired title you want to manage
using […†].
Change Name
To change the name of a title:
4
5
6
4
5
7
Select ‘Play Title' using [œ √] .
Press [ENTER] to change the title name.
The Keyboard Menu will be displayed. Use [œ
√…†] to select a character or function and
press [ENTER].
CLR : Clear the whole title. / SP : Add a space /
DEL : Delete a character / SAVE : Save the title
name
Play a Title
To play a title:
Select ‘Change Name’ using [œ √] .
After the new title name is complete, select
‘SAVE’ and press [ENTER].
Press [ENTER] to play the title.
Large arrow
pointing to
disc menu or
next page is
only visible
for a moment
when […/†]
is pressed.
…
√
†
TITLE
CLR SP
1 2 3 4 5
ABC D E
K LMN O
U VW X Y
: ; &
Press [Enter] to begin
playback of title.
Instructions:
Enter-Confirm
Instructions:
Enter-Confirm
Erase a Title
4 Select ‘Erase Title‘ using [œ √].
5 Press [ENTER] to erase the title.
6 Select 'Yes' and press [ENTER] to confirm. The
Erase Title progress bar will be displayed. This
may takes several seconds.
After erasing is complete, the erased title
remains as an empty title.
You can erase titles on DVD±RW discs only.
Erase Title
Erase Title
Press [Enter] to erase
Erase Title
this title.
Would you like to Erase
the title?
Yes
Title is being erased.
No
Instructions:
Enter-Confirm
Change Name
Press [Enter] to change
the title name.
Play Title
EMPTY
7
Change Name
Please wait a moment...
Instructions:
Enter-Confirm Move …†
56
Downloaded From Disc-Player.com Daewoo Manuals
DEL
6 7
F G
P Q
Z (
SAVE
8 9 0
H I J
R S T
) . ,
Enter-Confirm Move …†
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 57
mac001
1200DPI 100LPI
Disc Manager
Advanced Disc Editing
Record Option
To set DVD±R and DVD±RW recording options:
4
Select ‘Record Options’ using [œ √] and press
[ENTER].
5
Select your preferred record options for each
disc type:
For DVD±R
The last recorded title :
Allows you to append your new recording to
the end of your last recording, or record it as a
new title.
Others :
Allows you to record your new title until the
end of the disc.
When you insert a DVD±R or DVD±RW disc already
recorded by your HDD/DVD Recorder, you can edit
the titles and chapters in a variety of ways.
At first, go to ‘DVD Edit’ mode.
1
2
Press [MENU] to go to ‘Disc Menu’ menu.
3
Press [EDIT]. ‘DVD Edit’ menu will be displayed.
Select the recorded title you want to edit using
[…†].
…
√
†
2. TITLE
02/01/2004
03:24:48
SP 00:01:12
For DVD±RW
The last blank title :
Allows you to record your new title until the
end of the disc.
The last recorded title :
Allows you to record over your last recorded
title and then stop.
Allows you to record over your last recorded
title and continue recording until the end of the
disc.
Allows you to append your new recording to
the end of your last recording. (option)
Others :
Allows you to record over the title and then
stop.
Allows you to record over the title and continue
recording until the end of the disc.
Record Options
Press [Enter] to select
a method for overwriting
this title.
You can choose
Overwrite then stop
Overwrite and continue
(Append to existing)
Instructions:
Enter-Confirm
Instructions:
Enter-Confirm Move …†
EMPTY TITLE
EMPTY
Titles and Chapters
When you insert a DVD±R or DVD±RW disc already
recorded by your HDD/DVD Recorder, all titles
recorded on the disc appear on your screen. If a
selected title has chapters, you can skip to the next
or previous chapter by pressing [NEXT] or [PREV].
You can also see how many chapters are in a title
by pressing [DISPLAY] during playback.
Title
To select a specific title:
DVD Edit
Title
1 of 2
Chapter
1 of 11
Select Title …
Edit Chapters
Hide Chapter 1 of 2
Change Index Picture †
Split Title
1
Use […†] to select
‘Title‘.
2
Press [ENTER] to display
the submenu.
3
Use […†] to select the
desired title number and then press [ENTER].
Instructions:
Enter-Confirm Setup-Exit
Move …†
Chapter
As overwriting function may take several minutes to
finish and save recording, we recommend to delete
the title and record function.
To select a specific chapter:
1
Use […†] to select
‘Chapter‘.
2
Press [ENTER] to display
the submenu.
3
Use […†] to select the
DVD Edit
Title
1 of 2
Chapter
1 of 11
Edit Chapters
Hide Chapter
Select Chapter…
Change Index Picture
1 of 11 †
Split Title
Instructions:
Enter-Confirm Setup-Exit
Move …†
57
Downloaded From Disc-Player.com Daewoo Manuals
EDITING
Record Options
1. TITLE
02/01/2004
03:24:48
HQ 00:03:21
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 58
mac001
1200DPI 100LPI
Disc Manager
desired chapter number and then press
[ENTER].
Edit Chapters
You can add a chapter marker anywhere in a title
during playback.
Once the chapter is marked, you can use the
chapter search feature as described above.
You can add/delete chapter markers or delete all
chapter markers in a title.
1
Use […†] to select ‘Edit
Chapters‘.
2
Press [ENTER] to display
the submenu.
3
Use […†] to select one
of the various chapter
marker functions (Add,
Delete, or Delete All).
4
Title
1 of 2
Chapter
1 of 11
Edit Chapters
Hide Chapter
Change Index
Picture
Choose
the edit
Split Title
Delete All
Press [ENTER] to display
the submenu.
3
Use […†] to select ‘Yes‘
if you prefer to change the
picture.
4
DVD Edit
Title
1 of 2
Chapter
1 of 11
Edit Chapters
Hide Chapter
Change Index Picture
Split Title
Instructions:
Enter-Confirm Setup-Exit
Move …†
DVD Edit
Title
1 of 2
Chapter
1 of 11
Edit Chapters
Hide Chapter
Change Index Picture
Split Title
Instructions: Change Picture
Enter-ConfirmAreSetup-Exit
you sure?
Move …†
Yes
No
Press [ENTER] when the preferred picture is on
your TV screen.
58
Downloaded From Disc-Player.com Daewoo Manuals
2
Press [ENTER] to display
the submenu.
3
Use […†] to select 'Yes'
if you prefer to split the
title.
4
DVD Edit
Title
1 of 2
Chapter
1 of 11
Edit Chapters
Hide Chapter
Change Index Picture
Split Title
Instructions:
Enter-Confirm Setup-Exit
Move …†
Press [ENTER] at the
point where you want to divide the
title into two separate titles
Split the title
in two?
Yes
No
Split Title
Splitting title into 2 titles.
Instructions:
Setup-Exit
Each title displayed in the Playlist menu is
represented by a thumbnail picture taken from the
start of that title or chapter. If you prefer, you can
select a different still picture from within the title.
2
Use […†] to select 'Split
Title'.
Please wait a moment....
Change Index Picture
Use […†] to select
‘Change Index Picture‘.
1
Function
Instructions:Add
Enter-Confirm
Setup-Exit
Delete
Move …†
Hide Chapters
1
This feature allows you to split a title into two
titles.
DVD Edit
Press [ENTER] to confirm.
This feature allows you to
hide or unhide a chapter.
After hiding a chapter, the
chapter is not deleted but
only hidden. If a chapter is
hidden then it shows ‘Unhide
Chapter‘ and vice versa.
Split Title
• Split Title may take several minutes.
• After editing is complete, a DVD-RW,DVD±R
disc will not be compatible with other DVD
players until you make the disc compatible; see
page 54~55.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 59
mac001
1200DPI 100LPI
Troubleshooting
Check the following guide for the possible cause of a problem before contacting customer support.
Symptom
No power.
Cause
Solution
The power cord is disconnected.
Downloaded From Disc-Player.com Daewoo Manuals
REFERENCE
59
EDITING
Plug the power cord into the wall outlet
securely.
The TV is not set to receive HDD/DVD Select the appropriate video input on the
No picture.
Recorder signal output.
TV so the picture from the HDD/DVD
Recorder appears on the TV screen.
The video cable is not connected
Connect the video cable securely.
securely.
The TV power is turned off.
Turn on the TV.
The equipment connected with the
No sound.
Select the correct input mode on the audio
audio cable is not set to receive
receiver so you can listen to the sound
HDD/DVD Recorder signal output.
from the HDD/DVD Recorder.
The audio cables are not connected
Connect the audio cables securely.
securely.
The power on the equipment
Turn on the equipment connected with the
connected with the audio cable is
audio cable.
turned off.
The audio cables are damaged.
Replace with new ones.
Playback picture is poor. The disc is dirty.
Clean the disc.
HDD/DVD Recorder does No disc is inserted.
Insert a disc. (Check that the disc
not start playback.
indicator on the front panel display is lit.)
An unplayable disc is inserted.
Insert a playable disc. (Check the disc
type, colour system, and regional code.)
The disc is placed upside down.
Place the disc with the playback side
down.
Place the disc on the disc tray correctly
The disc is not placed within the
inside the guide.
guide.
Clean the disc.
The disc is dirty.
Cancel the Parental Control function or
The Parental Control level is set.
change the rating level.
You cannot connect via the HDD/DVD
The video signal from the external
Picture from external
Recorder. Connect the component
component is copy-protected.
input is distorted.
directly to your TV.
Use the ‘Adjust Channels’ feature to
Some channels are skipped The skipped channels were deleted
restore channels.
with the ‘Adjust Channels’ feature.
over when using [PR+/–].
Tighten connections or replace cable.
Antenna or cables are loose.
Picture or sound of
broadcasting channel is Wrong Tuning Band is selected in the Try all ‘Auto Set‘ options; see page 21 for
details.
HDD/DVD Recorder Setup menu.
weak or missing.
Turn camcorder on and operate properly.
Camcorder is off.
Camcorder image not
shown.
Use [INPUT] to select AV input channel
Camcorder image via A/V The HDD/DVD Recorder’s source is
(AV, AVF or DV).
not set to AV, AVF or DV.
input to HDD/DVD
Recorder is not shown on
The disc was not finalised (or not made
TV screen.
Finalise the disc; see page 55.
Can’t play disc recorded compatible if using a DVD+RW).
Some players will not play even a
on this HDD/DVD
No solution.
Recorder on another DVD finalised disc.
Discs recorded with copy-once
player.
No solution.
material cannot be played on other
players.
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 60
mac001
1200DPI 100LPI
Troubleshooting
Symptom
Cannot record or did not
record successfully.
Timer Recording not
possible.
Stereo Audio Record
and/or Playback not
present.
Remote control does not
work properly.
Cause
Solution
The remaining blank space on the
disc is insufficient.
The source you are trying to record is
copy-protected.
When setting the recording channel,
the channel is tuned on your TV’s
tuner.
Clock in HDD/DVD Recorder is not set
to correct time.
Timer has been programmed
incorrectly.
TIMER indicator light does not appear
after programming timer.
TV is not Stereo-compatible.
Broadcast program is not in stereo
format.
HDD/DVD Recorder A/V Out jacks are
not connected to TV A/V In jacks.
Use another disc.
You cannot record the source.
Select the channel on the HDD/DVD
Recorder’s built-in TV tuner.
Set clock to correct time. See ‘Set Clock‘
on page 21.
Reprogram Timer. See ‘Timer Recording‘
on page 42~44.
Reprogram Timer.
No solution.
No solution.
Make A/V connections. Stereo is available
only via A/V output from HDD/DVD
Recorder.
HDD/DVD Recorder Audio/Video Out is Select AUX or A/V source as TV input.
not selected for viewing at the TV.
Set TV audio channel mode to Stereo.
HDD/DVD Recorder’s TV audio
channel is set to BIL or MONO.
See ‘Changing the TV Audio Channel‘ on
The remote control is not pointed at
page 33.
the remote sensor of the HDD/DVD
Point the remote control at the remote
Recorder.
sensor of the HDD/DVD Recorder.
The remote control is too far from the
HDD/DVD Recorder.
Operate the remote control within 23 ft
There is an obstacle in the path of the (7m).
remote control and the HDD/DVD
Remove the obstacle.
Recorder.
The batteries in the remote control are
dead.
Replace the batteries.
RESET : If the set is in malfunctions, press [DVD/HDD] key on the front panel for 5 seconds or unplug the power cord,
and then plug it in after 5 seconds. As this set is a Digital Multimedia Product, malfunction may occur.
Moisture Condensation
Moisture condensation can occur:
In locations where moisture condensation may occur:
When the HDD/DVD Recorder is moved from a cold
place to a warm place.
Keep the HDD/DVD Recorder plugged into an AC
power outlet with the power on. This will help
prevent condensation.
Under extremely humid conditions.
When condensation has occurred, wait a few hours
for the HDD/DVD Recorder to dry before using it.
60
Downloaded From Disc-Player.com Daewoo Manuals
DG-M32D1P-2A(GB)
2006.5.16 4:40 PM
˘
` 61
mac001
1200DPI 100LPI
Technical Specifications
General
Power requirements 200–240V~, 50/60 Hz
Power consumption 40W
Dimensions(approx.) 435 x 55 x 343 mm (w x h x d)
Mass (approx.)
Net : 4.3kg Gross : 5.6kg
Operating temperature
41°F to 95°F (5°C to 35°C)
Operating humidity
5% to 90%
Signal system
PAL Colour
Recordable discs
Recordable time
DVD Video Recording, DVDVIDEO
DVD±R, DVD±RW
[DVD] (Approx.) 1 hour (HQ
mode), 2 hours (SP mode), 4
hours (EP mode), 6 hours (SLP
mode)
[HDD] (Approx.) 51 hours (HQ
mode), 105 hours (SP mode),
204 hours (EP mode), 310 hours
(SLP mode)
Video recording format
Sampling frequency
Compression format
27MHz
MPEG 2
Audio recording format
Sampling frequency
Compression format
Over 500 lines (HQ Recording)
Inputs
Antenna In/Out
Video In
Audio In
DV IN
U/V-mixed; 75 Ω unbalanced
1.0 Vp-p, unbalanced
-8.8 dBm
4pin (i.LINK/IEEE 1394
standard)
Outputs
Recording
Recording formats
Resolution
48kHz
MPEG1 Layer2
HDD Specifications
Capacity
250GB (1 platter)
RPM
7200 RPM
Start Time
8 sec (15 sec max )
Stop time
12 sec ( 20 sec max )
HDD Recording Capacity (250GB) (Approx.)
HQ : 9.5 Mbps, 51Hr, SP : 5.1
Mbps, 105Hr, EP : 2.5 Mbps,
204Hr, SLP : 1.7 Mbps, 310Hr
Audio Frequency range 20Hz to 20 KHz
Video S/N
Over 50 dB
Audio S/N
Over 65 dB
Resolution
Over 500 lines (HQ Recording)
Video output
Video output terminal, 1.0 Vp-p,
unbalanced, RGB output (75Ω
in load, R : 0.7Vp-p, G : 0.7Vp-p,
B : 0.7Vp-p)
Audio output
Audio output terminal (2
kinds), 2Vrms (DVD) Analog
audio output : 2.0Vrms,
Digital audio output : coaxial,
optical
S-Video output
1.0Vp-p, 75Ω unbalanced,
Mini DIN 4-pin x 1, C :
0.286Vp-p, 75Ω
Component Video output/Progressive Scan
(Y) 1.0Vp-p, 75 Ohm, negative
sync, RCA jack X 1, (Pb)/(Pr)
0.7Vp-p, 75 ohm , RCA jack X2
Accessories
RF cable ...................................................................... 1
Blank DVD+RW disc .................................................. 1
Remote control .......................................................... 1
Batteries ..................................................................... 2
Design and specifications are subject to change
without notice.
DVD Specifications
Video S/N
Audio S/N
Harmonic distortion
Dynamic range
DVD (PCM 48 kHz): 8 Hz to 22
kHz, CD: 8 Hz to 20 kHz
More than 60 dB
More than 90 dB
Less than 0.04%
More than 90 dB
Manufactured under license from Dolby
Laboratories. ‘Dolby‘ and the double-D symbol
are registered trademarks of Dolby Laboratories.
DTS and DTS Digital Out are registered
trademarks of Digital Theater Systems, Inc.
61
Downloaded From Disc-Player.com Daewoo Manuals
REFERENCE
Frequency response
Downloaded From Disc-Player.com Daewoo Manuals
The information provided will be held on computer by the DAEWOO Registration Department of Domestic & General Insurance Co. Limited for the provision
of warranty insurance or product related purposes.
The information will not be disclosed to third parties, should you prefer not to receive product related details writes to Domestic & General Insurance Co.
DAE REG / 295
Limited, on the address overleaf.
TODAY
DATE OF PURCHASE
TEAR
OFF HERE
AND RETURN
MODEL No.
KEEP THIS SECTION FOR FUTURE REFERENCE
SERIAL No.
PRODUCT VALUE
DATE OF PURCHASE
NAME OF RETAILER
SERIAL No.
POSTCODE
Please keep this with your purchase receipt, which
will be required if service is needed on this product
during the guarantee period.
On the expiry date of the manufacturer’s guarantee you will be sent details of our annual insurance plan but if you have already bought an extended warranty
for this product from your retailer please tick box
PRODUCT DESCRIPTION
MODEL No.
PRODUCT DETAILS
COUNTRY
TOWN
INITIALS
mac001
NUMBER/HOUSE NAME/STREET
SURNAME
` 62
MR
MRS
MS
YOUR 1ST YEAR
MANUFACTURER’S
GUARANTEE
˘
To register you product for its 12 month guarantee please complete and return the section below.
IMPORTANT
2006.5.16 4:40 PM
REGISTERING YOUR NEW DAEWOO PRODUCT
GUARANTEE REGISTRATION
DG-M32D1P-2A(GB)
1200DPI 100LPI
DAEWOO GUARANTEE CONDITIONS
This product is guaranteed for 12 months from the date of original
purchase. Any defect that arises due to faulty materials or
workmanship will be repaired free of charge during this period by
the dealer from whom you purchased the unit. The guarantee is
subject to the following provisions.
The guarantee does not cover accidental damage, misuse, cabinet
parts, knobs or consumable items such as batteries, drive belts or
bulbs.
The product must be correctly installed and operated in accordance
with the instructions contained in the manual. It must be used solely
for domestic purposes. For further information regarding your
guarantee please see the section at the rear of your user manual.
The guarantee will be rendered invalid if the product is resold or has
been damaged by inexpert repair.
DAEWOO disclaims any liability for incidental or consequential
damages.
The guarantee is in addition to and does not diminish your statutory
or legal rights.
In the event of a breakdown please refer to your instruction manual
and check all plugs, fuses and electricity supply.
In the event of there being no breakdown you will be charged for
the repair.
AFFIX
STAMP
HERE
DAEWOO GUARANTEE DEPARTMENT
Leicester House
17, Leicester Street
Bedworth
Nuneaton
Warwickshire CV12 8JP
Downloaded From Disc-Player.com Daewoo Manuals
1200DPI 100LPI
mac001
` 63
˘
2006.5.16 4:40 PM
DG-M32D1P-2A(GB)