Preliminary

TQMa6ULx

Energy efficient for future designs

The Minimodule TQMa6ULx, based on the i.MX6UL from NXP, combines the ARM Cortex-A7 core technology with a variety of interfaces.

The integrated graphics controller supports applications with display and touch screen requirements. For various applications such as, industrial automation and controls with requirements for low power and secure data processing, there are three CPU variants available. With a

Single Cortex™-A7 core and a clock rate up to 528 MHz the TQMa6ULx provides a balanced ratio between applications for visualization and control performance and power dissipation.

The highlights:

 Graphic

 Extended temperature range

 2x Ethernet with IEE1588

 Low power consumption (typ. 1 W)

 Camera Sensor Interface

 Security functions

 Long term availability

Block Diagram TQMa6ULx

ARM Cortex A7 @528 MHz

32 KB I/D L1 Cache 128 KB L2 Cache

Security

RNG, eFuse, 10 tamper pins, Ciphers, OTF DRAM Encryption, RTC, RSA 4096, 32k storage

Camera

16Bit Interface

2 x Ethernet

IEEE 1588

4 x SPI

ADC

Grafik

1366 x 768

2 x

USB 2.0

SDIO/

MMC

3 x I²S,

4 x I²C

2 x

CAN

8 x UART

5 V

Module connector 200 Pins

DDR3L-SDRAM

Q-SPI

NOR Flash eMMC Flash

RTC

EEPROM

Power

Technical specification

Microprocessor i.MX6UL-1, i.MX6UL-2, i.MX6UL-3

System interfaces

Up to 2x Ethernet 10/100 Mbit

Up to 2x CAN

Up to 2x USB 2.0 high speed OTG interface

Up to 8x UART

Periphery interfaces

Up to 2x SDIO/MMC

Up to 4x I²C

Up to 4x SPI

Up to 3x I²S

Graphic

LCD Interface (24 Bit RGB)

1 x 16 Bit Camera Sensor Interface

Memory

DDR3L-SDRAM: Up to 512 MB

Quad SPI NOR: Up to 256 MB (TBD)

Up to 32 GB eMMC flash

EEPROM: 0 / 64 kbit

Other

Real Time Clock (RTC)

Temperature sensor

CPU JTAG Interface

Power supply

5 V TBD

Ambient conditions

Standard temperature range: -25°C…+85°C

Extended temperature range: -40°C…+85°C

Dimensions

46 mm x 32 mm (TBD)

Plug-in system

Board-to-board plug-in system 200 pins (TBD)

Operating systems

Linux

Operating systems on request

VxWorks, QNX, WIN EC 2013

Ordering information (preliminary)

TQMa6UL1-AA (Prototypes Q2/16)

TQMa6UL1, Cortex-A7 / 528 MHz, 4 GB eMMC Flash

256MB DDR3L, 64 kB EEPROM, -25°C …+85°C

TQMa6UL2-AA (Prototypes Q2/16)

TQMa6UL2, Cortex-A7 / 528 MHz, 4 GB eMMC Flash

256MB DDR3L, 64 kB EEPROM, -25°C …+85°C

TQMa6UL3-AA (Prototypes Q2/16)

TQMa6UL3, Cortex-A7 / 528 MHz, 4 GB eMMC Flash

256 MB DDR3L, 64 kB EEPROM, -25°C …+85°C

STKa6ULx-AA (Prototypes Q2/16)

STKa6 (Eval Kit) with TQMa6ULx-AA, Cortex-A7 / 528 MHz, 256

MB DDR3L, 4 GB eMMC Flash,

64 kB EEPROM, 1x RS232, 1x RS485, 2 x CAN 2.0B separated

3x USB 2.0 HOST, 1x USB 2.0 OTG, 2x ETH 10/100,

LCD Port, 1xHDMI, LVDS, 1x Mini PCIe (only USB), RTC,

Temperature sensor, Reset-Button, SD interface,

Power supply, 4 GB SD card, Cables

Starter kit STKa6ULx set

The core of the STKa6ULx set is the TQMa6ULx module with a

Cortex-A7 CPU. The components contained in the starter kit constitute a modular system enabling you to develop your own product ideas. Development of graphic interfaces can be started immediately using the prepared combination of closed display unit and starter kit that are matched to each other. To develop your own hardware you can use the certified and qualified circuit components of the starter kit in your own designs.

TQ-Systems GmbH

Mühlstr. 2 l Gut Delling | 82229 Seefeld | Germany

Phone: +49 8153 9308-0 | Fax: +49 8153 4223 [email protected] | www.tq-group.com

>> Quicklink: www.tq-group.com/en/TQMa6ULx

Technology in Quality