TESTING
CV Rockwell Hardness Tester
W-600A / W-600MA / W-600MA/S
Basic regular Rockwell type tester (600A/MA) and Superficial Rockwell type tester (600MA/S) offering accuracy, reliability and durability at an
extremely affordable price.
W-600A
W-600MA
W-600MAS
Features
• Rugged construction, will stand up to the harshest environments
• Direct reading of Rockwell scales HRC, B, A, F or Superficial: HRT, HRN
• Other scales with the use of optional indenters
• Accuracy conforms to EN-ISO 6508 and ASTM E-18
• Easy load force selection by robust dial knob
• Oil brake with variable damping by adjustable knob (W-600A)
• Large capacity to accommodate large test specimen
• Electronic control of load duration (dwell time) (W-600MA & W-600MA/S)
• Motorised testing procedure (W-600MA & W-600MA/S)
• Standard delivery including accessories ready for testing all scales
140
For more information visit www.bowers.co.uk
BUK2014_P140-141.indd 140
25/03/2014 15:29
TESTING
CV Rockwell Hardness Tester
W-600A / W-600MA / W-600MA/S
TECHNICAL SPECIFICATION
Rockwell scales
Standard A, B, C, F (W-600A/W-600MA)
Superficial HRT, HRN (W-600MA/S)*
Hardness resolution 1 of a Rockwell unit
Test loads
Rockwell 10kgf preload / 60, 100, 150kgf main load
Superficial Rockwell 3kgf preload / 15, 30, 45kgf main load
Display Dial indicator
Test force application By force lever (W-600A)
Motorised load system (W-600MA & W-600MA/S)
Test cycle Manual (W-600A);
Motorised (preload applied manually) (W-600MA & W-600MA/S)
Load duration Manually, following display indication (W-600A),
Automatic (W-600MA & W-600MA/S)
Dwell time 2-99 sec (1 sec. step) (600MA/S)
Data output Non
Accuracy Conforms to EN-ISO 6508 and ASTM E-18
Specimen accommodation Vertical space 170mm (6.7")
Horizontal space (from center-line)
165mm (6.5")
Specimen access
External surfaces
Power supply
Non (600A), 220V 50Hz (600MA & 600MA/S)
Machine dimensions 150mm x 485mm x 700mm (WxDxH)
Machine weight
Approx. 85kg
*Other scales with the use of optional indenters.
CV ROCKWELL ANALOGUE HARDNESS TESTER
Code No
W-600A
W-600MA
W-600MAS
Description
Rockwell Tester, Manual, Analogue display
Rockwell Tester, Motorised, Analogue display
Superficial Rockwell Tester, Motorised, Analogue display
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P140-141.indd 141
Standard Delivery
• Main unit
• Diamond Rockwell indenter
• Rockwell ball indenter 1/16"
• Hardness test block ±60HRC
• Hardness test block ±25HRC
• Hardness test block ±85HRB
• Flat anvil ø 60mm
• Large flat anvil ø 150mm
• V-anvil Ø 40mm
• Adjustable feet (4 pcs)
• Spindle protection cover
• Solid accessories case
• CV Instruments certificate
• Installation & user manual
• Spare lamps 6V-12W (2pcs)
(W-600MA/S)
• Spare balls 1/16" (5pcs)
• Power cable (W-600MA/S)
• Fuse 0.5A (2pcs) (W-600MA/S)
Optional Accessories
• Certified test blocks
• Certified indenters & balls
• Clamping protection nose
• Pedestal spot anvil Ø 10mm
Partners in Precision
141
31/03/2014 09:41
TESTING
CV Advanced Digital Rockwell Hardness Tester
W-600BDL / W-600MBDL / W-600MBDL/S
Basic digital regular Rockwell type tester (W-600BDL/MBDL) and Superficial Rockwell type tester (W-600MBDL/S) offering accuracy, reliability
and durability at an extremely affordable price.
W-600BDL
W-600MBDL
W-600MBDLS
Features
• Advanced functions such as CONVERSION to Brinell, Vickers and all Rockwell scales. USB-2 output, printer output for
detailed measuring report, Go/No Go limit settings, 99 memory positions, PROGRAM mode stores 50 test program
settings, shape correction setting, full statistics
• Direct reading of Rockwell scales HRA, B, C, D, E, F, G, K, L, M, P, R, S (HRN, T, W, X & Y W-600MBDL/S)
• Accuracy conforms to EN-ISO 6508 and ASTM E-18
• Easy load force selection by robust dial knob
• Oil brake with variable damping by adjustable knob (W-600BDL)
• Large capacity to accommodate large test specimen
• Selectable control of load duration (dwell time)
• Motorised testing procedure (W-600MBDL & W-600MBDL/S)
• Rugged construction, will stand up to the harshest environments
• Standard delivery including accessories ready for testing all scales
142
For more information visit www.bowers.co.uk
BUK2014_P142-143.indd 142
25/03/2014 15:30
TESTING
CV Advanced Digital Rockwell Hardness Tester
W-600BDL / W-600MBDL / W-600MBDL/S
TECHNICAL SPECIFICATION
Rockwell scales
Standard Superficial Hardness resolution
Test loads
Rockwell Superficial Rockwell Display
Test force application Test cycle Load duration Dwell time
Measuring protocol
Indications on display Accuracy
Specimen accommodation Specimen access
Data output
Power supply Machine dimensions Machine weight A,B,C,D,E,F,G,K,L,M,P,R,S
HRN, T, W, X & Y (W-600MBDL/S)
0.01 of a Rockwell unit
10kgf preload /60, 100, 150kgf main load
3kgf preload /15, 30, 45kgf main load
Full colour multi function indicator
By force lever (W-600BDL)
Motorised load system (W-600MBDL)
Manual (W-600BDL); Motorised (preload
applied manually) (W-600MBDL)
Manually, following display indication
(W-600BDL); Automatic (W-600MBDL)
2-99 sec. (1 sec. step)
ISO / ASTM / JIS
Progress bar for preload, preload applied, main load applied,
dwell time, invalid reading, invalid measurement, invalid
procedure, Rockwell value, Go/No Go, shape correction, limits,
program number, conversion scale, statistics, scale applied
Conforms to EN-ISO 6508 and ASTM E-18
Vertical space 170mm (6.7")
Horizontal space (from center-line) 165mm (6.5")
External surfaces
Cylindrical surfaces down to 3mm diameter
USB
Input 110/220Volt 50/60Hz
150mm x 485mm x 700mm (WxDxH)
Approx. 85kg
CV ROCKWELL DIGITAL HARDNESS TESTERS
Code No
W-600BDL
W-600MBDL
W-600MBDLS
Description
Rockwell Tester, Manual, LED display
Rockwell Tester, Motorised, LED display
Superficial Rockwell Tester, Motorised, LED display
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P142-143.indd 143
Standard Delivery
• Diamond Rockwell indenter
• Rockwell ball indenter 1/16"
• Hardness test block ±60HRC
• Hardness test block ±25HRC
• Hardness test block ±85HRB
• Spare balls 1/16" (5 pcs)
• Flat anvil ø60mm
• Testing table large ø150mm
• V-anvil ø40mm
• Power cable
• Adjustable feet (4 pcs)
• Spindle protection cover
• Spare lamps 6V-12W (2pcs)
• Solid accessories case
• CV Instruments certificate
• Installation & user manual
Optional Accessories
• Reference hardness blocks
• Certified indenters & balls
• Clamping protection nose
• Pedestal spot anvil Ø10mm
Partners in Precision
143
31/03/2014 09:46
TESTING
Eseway® Premium Rockwell Hardness Tester
EW-650
LCD touch screen, superior functionality, ultra high precision, 3 models available.
Features
• Measures all standard Rockwell hardness values
• Simultaneous conversion to HV, HB and other HR scales
• Rugged fine cast frame, allowing larger dimension work pieces
• ASTM, ISO, JIS compliant
• ESELOAD™ unique motorised load application system, auto selection of main loads
depending on HR scale (656 & 657 only)
• Superior depth measuring system through Heidenhain (Germany) transducer
• ESETOUCH™ advanced LCD touch screen & operator panel with user friendly menu
operation in multiple languages
• High speed preload, loading and unloading procedure for ultra high efficiency
• ESELIFT™ (657 only) motorised elevating screw simplifies and speeds up test operation
• Automatic measurement procedure, load / dwell / unload (655 & 656 models)
• ESEMATIC™ fully automatic positioning and measuring procedure (positioning, preload,
load, dwell, unload (657 only))
• Storage of 50 test programs and tester settings, allowing you to set up your tester
in just seconds
• Alpha numerical data entry
• Continuous automatic "online’’ statistics, incl. average of readings etc.
• Storage of 99 single hardness values
• Go / No Go mode
• Convex and concave measuring mode
• Calibration date expired (reminder)
Standard Delivery
• Service mode including electronic linearity calibration, tests counter, maintenance system
• Main unit
• Prints statistics to built-in printer or external printer
• Built-in thermal printer
• Connects with PC or SPC network via built-in bi-directional USB2 connector
• Data-output USB2
• Diamond Rockwell indenter
• Rockwell ball indenter 1/16"
TECHNICAL SPECIFICATION
Rockwell scales
Conversion to
Hardness resolution
Pre-load
Main loads
Pre-load application
Test load application
Data entry
Test force application
Data output
LCD Display
Specimen accommodation
Power supply
Machine dimensions
Net weight A,B,C,D,E,F,G,K,L,M,P,R,V
HV, HB, other HR scales
0.1 of a Rockwell unit
10kgf
60, 100, 150kgf
Manual (automatic for 657 ESEMATIC™)
Fully automatic
Membrane keypad
Automatic main load application
Built in high speed printer & USB2
Hardness value, conversion value, test force indicator,
dwell time, memory contents, all machine settings, go / no go, all statistics
Vertical space 275mm
Horizontal space (from centre of elevator) 190mm
110/240V, 50-60Hz
Approx. 940mm x 390mm x 670mm (HxWxD)
Approx. 140kg
ESEWAY® PREMIUM ROCKWELL TYPE HARDNESS TESTER
Code No
W-EW-655
W-EW-656
W-EW-657
144
Description
ESETOUCH Manual load, Manual elevator lead screw
ESELOAD Automatic load selection, Manual elevator lead screw
ESEMATIC Automatic load selection, motorised elevator lead screw / Full automatic
• Rockwell testing balls
• Flat testing anvil ø 60mm
• Flat anvil Ø 150mm
• V-anvil Ø 50mm
• Hardness test blocks:
±60 HRC, ±25 HRC, ±85 HRB
• Power cable
• Spare fuse
• Adjustable feet (4 Pcs)
• Spindle protection cover
• Machine cover
• Solid accessories case
• ESEWAY® certificate
• User and installation manual
Optional Accessories
• Clamping and indenter protection nose
• UKAS, DKD, ASTM Certified test blocks
• UKAS, DKD, ASTM Indenters & balls
• Pedestal spot anvil Ø 10mm
• Special support systems for large work pieces
For more information visit www.bowers.co.uk
BUK2014_P144-145.indd 144
25/03/2014 15:31
TESTING
Eseway® Premium Twin Scale Rockwell Hardness
Tester EW-670
LCD touch screen, superior functionality, ultra high precision, 3 models available.
Features
• Measures all Standard & Superficial Rockwell hardness values
• Simultaneous conversion to HV, HB and other HR scales
• Rugged fine cast frame allowing large dimension work pieces
• ASTM, ISO, JIS compliant
• ESELOAD™ unique motorised load application system, auto selection of main loads
depending on HR scale (676 & 677 only)
• Superior depth measuring system through Heidenhain (Germany) transducer
• ESETOUCH™ advanced LCD touch screen & operator panel with user friendly menu
operation in multiple languages
• High speed preload, loading and unloading procedure for ultra high efficiency
• ESELIFT™ (677 only) motorised elevating screw simplifies and speeds up test operation
• Automatic measurement procedure, load / dwell / unload (677 only)
• ESEMATIC™ fully automatic positioning and measuring procedure (positioning, preload,
load, dwell, unload (676 and 677 models))
• Storage of 50 test programs and tester settings, allowing you to set up your tester
in just seconds
• Alpha numerical data entry
• Continuous automatic "online’’ statistics, incl. average of readings etc.
• Storage of 99 single hardness values
• Go / No Go mode
• Convex and concave measuring mode
• Calibration date expired (reminder)
Standard Delivery
• Service mode including electronic linearity calibration, tests counter, maintenance system
• Main unit
• Prints statistics to built-in printer or external printer
• Built-in printer
• Connects with PC or SPC network via built-in bi-directional USB2 connector
• Data-output USB2
• Diamond Rockwell indenter
• Rockwell ball indenter 1/16"
TECHNICAL SPECIFICATION
Rockwell scales
Standard
A,B,C,D,E,F,G,K,L,M,P,R,V
Superficial
15N, 30N, 45N, 15T, 30T, 45T, 15W,
30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y
Conversion to
HV, HB, other HR scales
Hardness resolution
0.1 of a Rockwell unit
Pre-load
3kgf / 10kgf
Main loads
15, 30, 45, 60, 100, 150kgf
Pre-load application
Manual (automatic for 677 ESEMATIC™)
Test load application
Fully automatic
Data output
Built-in high speed printer & USB2
LCD Display
Hardness value, conversion value, test force indicator, dwell time,
memory contents, all machine settings, go / no go, all statistics
Specimen accommodation
Vertical space 275mm
Horizontal space (from centre of elevator shaft) 190mm
Power supply
110/240V, 50-60Hz
Machine dimensions
Approx. 940mm x 390mm x 670mm (HxWxD)
Net weight Approx. 140kg
ESEWAY® PREMIUM ROCKWELL TYPE HARDNESS TESTER
Code No
W-EW-675
W-EW-676
W-EW-677
Description
ESETOUCH Manual load, Manual elevator lead screw
ESELOAD Automatic load selection, Manual elevator lead screw
ESEMATIC Automatic load selection, Motorised elevator lead screw, full automatic
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P144-145.indd 145
• Rockwell testing balls
• Flat testing anvil ø 60mm
• Flat anvil ø 150mm
• V-anvil ø 50mm
• Hardness test blocks:
±60HRC, ±25HRC, ±85HRB,Â�
±50HR30N, ±80HR30N, ±70HR30T
• Power cable
• Adjustable feet (4 Pcs)
• Spindle protection cover
• Machine cover
• Solid accessories case
• ESEWAY® certificate
• User and installation manual
Optional Accessories
• Clamping and indenter protection nose
• UKAS, DKD, ASTM Certified test blocks
• UKAS, DKD, ASTM Indenters & balls
• Pedestal spot anvil
• Special support systems for large work pieces
Partners in Precision
145
25/03/2014 15:31
TESTING
Load Cell Closed Loop Brinell Hardness Tester
NEXUS 3000 Series
The advanced Load Cell, Force Feedback Closed Loop, load application system of the NEXUS 3000 allows a wide
variety of test loads ranging from 30kgf to 3000kgf in one hardness test frame.
W-3001
Features
• Large multi function LCD display, Brinell microscope and built-in hardness calculator
• Shows Brinell hardness value directly on the display; converts to Rockwell, Vickers, Leebs and tensile strength
• Test loads 30kgf - 3000kgf
• Innovaview Computer & CCD (USB camera) technology allows measurement of HB indents automatically and
stores them in the system's database program, or export CSV files to Excel
• Motorised automatic elevator spindle available for easy work-piece positioning and running fully automatic
test procedures; positioning, main load, dwell, unload. Automatic start sequence option (NEXUS 3001 XLM)
• Frame types:
- Standard: vertical capacity - 220mm, throat depth - 220mm
- XL: vertical capacity - 390mm, throat depth - 220mm
146
For more information visit www.bowers.co.uk
BUK2014_P146-147.indd 146
31/03/2014 09:52
TESTING
Load Cell Closed Loop Brinell Hardness Tester
NEXUS 3000 Series
TECHNICAL SPECIFICATION
W-3001
Test force selection
Test procedure Hardness value Loading speed
Test force accuracy User display Display resolution Hardness conversion
Standardisation Statistics Control panel Memory
Data output Dwell time setting Eyepiece microscope Vertical capacity Horizontal capacity Humidity Weight Power 30, 31.25, 62.5, 100, 125, 187.5, 250, 500, 1000, 1500, 3000Kgf (Brinell)
Electronic, closed loop, load cell, force feedback system, indication in kgf or N.
Test force selectable over menu operation
Automatic, loading/dwell/unloading
5 digits
variable depending on load application
<1% full range
Diameter of indent, Length of diagonals, hardness value, converted value,
test force, online statistics
0.1 HB
Rockwell, Vickers, Brinell, Leeb & Tensile 2 scale simultaneously
EN ISO 6506, ASTM E-10-08
Total test, max, min, average, range, standard deviation,
all in real time after each test
Start test, stop test, light intensity, dwell time, print, clear
Large memory for testing results
RS-232, Bi-Directional
Default 10 seconds, user defined 1 to 60 seconds
Analogue
Standard 220mm, optional 390mm
220mm (from centre line)
10% to 90% non condensing
130Kg, XL version 160Kg
220V/110V, 50/60Hz, single phase
Standard Delivery
• Main unit
• Flat anvil 200mm
• Analogue microscope 20x (Brinell)
• Brinell test blocks & indenters
• RS232 data output
• 4 adjustable feet
• Fuse
• Installation & user manual
• Quality certificate
• Colour: laboratory white
Optional Accessories
• Motorised spindle
• Analogue microscope with LED light
30x, 40x, 100x
• HB100 Video measuring and
database system
• Extended height/width frame
• Motorised X-Y stage
• Certified indenters & test blocks
NEXUS 3000 SERIES TESTER
• Indenters & test blocks for Brinell
Code No
W-3001
• Solid tester table & storage cabinet
Description
Load Cell Closed Loop Brinell Hardness Tester
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P146-147.indd 147
• Specify alternative colour of unit
Partners in Precision
147
31/03/2014 09:52
TESTING
‘King’ Brinell Portable Hardness Tester
The 'King' Brinell Portable Hardness Tester is a lightweight, full load (3000kg) instrument capable of accurately testing a large variety of metal
specimens. The testers portability allows it to be used in any plane, conventionally for full load (3000Kg), in-situ Brinell testing of
large components.
Features
• Wide measuring range to 3000kgf
• Simple handling and low test expenditure
• High accuracy
• Conforms to ASTM and ISO Brinell Standards
• API approved
Standard Delivery
• Main unit
• 10mm Brinell ball
• Flat, dome and V-anvils
Optional Accessories
• Chain adapter
• Test blocks
• Reverse direction adapters
• Low pressure test head
• Video measurement microscope system
TECHNICAL SPECIFICATION
Pressure exerted
Pressure gauge indication
Max specimen height
Max specimen depth
Brinell ball
Accuracy
Up to 3000kgf
True load and load reached indication
14", (20" optional model)
4", (6" optional model)
Standard 10mm, optional 2.5mm, 5mm etc
0.5 of 1% of load ASTM/BS certifiable
BRINELL PORTABLE HARDNESS TESTER
Code No
W-WHB-120
W-WHB-MIC
Description
King Brinell Tester
20X Microscope for King Brinell
Kingscan IV Automatic Brinell Video Microscope
Features
• Major improvement in accuracy and repeatability of measurement
• Reduced cost of testing 2 sec test time typical
• 6ft and 15ft camera cables
• LED array lighting to maximise test accuracy under any condition
• Remote measure facility
BRINELL VIDEO MICROSCOPE
Code No
W-WHB-KIIIK
W-WHB-PACK
W-WHB-CASE
148
Description
KingScanIV Video Microscope System
KingScan/Case/Laptop
Case
For more information visit www.bowers.co.uk
BUK2014_P148-149.indd 148
25/03/2014 15:32
TESTING
‘King’ Brinell Portable Hardness Tester Accessories
•S
tandard test head
Calibrated accurate to 1/2 of 1% load.
Releases at 3000kg automatically.
Capable of incremental loads
•C
hain adapter
Used for large cylinders it fits onto a standard
test head and wraps around specimens that are
too big for regular tester. High strength
chrome/molybdenum steel arms hold the chain
to the test head and allow it to stay rigid while
the chain takes the full thrust of the load.
Supplied with 4' chain
•S
tandard test head with long ram
Same features as standard test head plus
a long ram that puts impression head at end
of 2" extension for easy access into recessed
areas or over raised edges
•B
ase
14" base with 14" test height opening and 4"
throat is standard. Optional 6" throat with
either 14" or 20" test height opening available,
20" base also available with 4" throat and 20"
test height opening
• L ow pressure test head
Applied load and indicator dial are
coordinated for softer metals.
Can be calibrated to release at loads of
62-1/2kg, 125kg, 250kg, 500kg, or 1000kg
• L ow pressure test head with long ram
Same features as low pressure test head plus
a long ram that puts impression head at end
of 2" extension for easy access into recessed
areas or over raised edges
•A
dapter to hold test head upright
without base
For testing large flats it enables test heads to be
used under large drill presses, boring mills,
arbor presses and beams that are capable of
withstanding 3000kg load
•2
.5mm and 5mm ball adapter
Used on softer materials or where
a smaller impression is desired
•S
tage micrometer
Used to check calibration of Brinell Microscope
by placing the microscope on the stage
micrometer and aligning the grid on the stage
micrometer with the grid on the microscope.
If the grids do not match perfectly, the
microscope is out of calibration and should be
re-calibrated.
Meets ASTM50, and is traceable to NIST standards
•B
rinell microscope
Constructed from stainless steel, the rugged
and optically reliable Brinell microscope is
the most versatile on the market today.
Featuring a 20x pre-focused lens, the
microscope has a narrow nosepiece which
easily fits into tight recesses, resulting in less
grinding on castings, billets and dies. For
added stability when performing flat work,
a slip-on base adapter is included. A side
opening in the microscope allows plenty of
natural light for viewing, and a cordless
movable pen light can be used in dim
conditions. Calibrated on equipment
traceable to NIST standards, the Brinell
microscope meets ASTM 5-10 specifications.
It is ready to use and comes equipped with
a handy storage case
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P148-149.indd 149
Partners in Precision
149
25/03/2014 15:32
TESTING
Premium Micro-Vickers Hardness Tester
NEXUS 410AAT/DAT Series
Motorised turret with analogue / digital measurement
microscope and easy-to-use integrated hardness calculator.
Features
• Two models available with 10gf - 1 Kgf or 10gf - 2Kgf depending
on model
• Fully automatic 4 position turret for
Micro Vickers /Knoop measurements
- Choice of turret configuration
- 3 objectives and 1 indenter
- 2 objectives and 2 indenter (Vickers & Knoop)
- Dual indenter (Vickers/Knoop) turret optional
• High resolution eyepiece
Analogue Eyepiece
Digital Eyepiece
• Built in high speed printer
NEXUS 410AAT/DAT SERIES TESTER
Code No
W-412AAT
W-413AAT
W-412DAT
W-413DAT
Standard Delivery
Description
Analogue, 2 objectives, 0.01 - 0.025 - 0.05 - 0.1 - 0.2 - 0.3 - 0.5 - 1Kgf (HV)
Analogue, 3 objectives, 0.01 - 0.025 - 0.05 - 0.1 - 0.2 - 0.3 - 0.5 - 1Kgf (HV)
Digital, 2 objectives, 0.01 - 0.025 - 0.05 - 0.1 - 0.2 - 0.3 - 0.5 - 1Kgf (HV)
Digital, 3 objectives, 0.01 - 0.025 - 0.05 - 0.1 - 0.2 - 0.3 - 0.5 - 1Kgf (HV)
• Main unit
• Manual X-Y stage
• Objectives according to model
(10x & 40x or 10x, 20x & 40x)
• Analogue eyepiece 15x (410AAT)
TECHNICAL SPECIFICATION
Test force selection
Test procedure Hardness value Turret Test force accuracy User display Display resolution Standardisation Statistics Control panel Firmware Memory
Data output Dwell time setting Printer Eyepiece microscope Light source Optical path Vertical capacity Horizontal capacity Stage dimensions Operating temperature Humidity Dimensions Weight
Power 150
Manual
Automatic, loading/dwell/unloading
5 digits
4 positions over 360º, fully automatic, memorised
start position, option for 2
< +/-1% for force from 100gr to 2kg, < +/-1.5%
for force below 100gr
Length of diagonals, hardness value, converted value,
test force, online statistics
0.1 HV, HK
EN, ISO 6507, ASTM E-384, EN 1S0 4545
Total test, max, min, average, range, standard deviation,
all in real time after each test
Start test, stop test, light intensity, dwell time, print, clear
English
Memory for 20 test results, with CCD-VIEW software unlimited results
RS-232 Bi-Directional
Default 5 seconds, user defined 1 to 60 seconds (5 sec. increments)
Built in, silent high speed thermal printer
Bright dual line filar eyepiece with 15x magnification, 0.1µm reading
Halogen 12V, 30W, green filter, dimmable
2 way, eyepiece / camera
90mm (maximum specimen height)
120mm (from centre line)
100x100mm, travel 25x25mm, and reading 0.01mm
5ºC to 40ºC (+/-20º for force 25gr and 50gr)
10% to 90% non condensing
420 x 250 x 490mm
37.5Kg
240V/110V, 50/60Hz, single phase
• Digital eyepiece 15x (410DAT)
• Vickers test block (+/- 725 HV 1)
• Vickers test block (+/- 450 HV 0.2)
• Built-in thermal printer
• RS-232 data output
• 4 adjustable feet
• Set of work piece fixtures - vice, chuck & clamp
• Spare halogen bulb
• Fuse
• Installation & user’s manual
• Quality certificate
Optional Accessories
• Choice of objective configuration
• IMP Video measuring systems
• Dual indenter turret, Vickers & Knoop
• Motorised X-Y stage
• Motorised X-Y-Z stage (auto focus)
• Metal support table with storage cabinet
• Indenter & test blocks
• Certified indenter & test blocks
Optional System
• IMP system for semi and automatic traverses, pattern
testing through PC support and motorised XY stage
For more information visit www.bowers.co.uk
BUK2014_P150-151.indd 150
31/03/2014 09:58
TESTING
Premium Micro-Vickers Hardness Tester
NEXUS 420AAT/DAT Series
Motorised turret with analogue / digital measurement
microscope and easy-to-use integrated hardness calculator.
Features
• Two models available with 10gf - 1 Kgf or 10gf - 2Kgf depending
on model
• Fully automatic 4 position turret for Micro Vickers /Knoop
measurements
- Choice of turret configuration
-3
objectives and 1 indenter
- 2 objectives and 2 indenter (Vickers & Knoop)
- Dual indenter (Vickers/Knoop) turret optional
Analogue Eyepiece
Digital Eyepiece
• High resolution eyepiece
• Built in high speed printer
NEXUS 420AAT/DAT SERIES TESTER
Code No
W-422AAT
W-423AAT
W-422DAT
W-423DAT
Standard Delivery
Description
Analogue, 2 objectives, 0.01 - 0.025 - 0.05 - 0.1 - 0.2 - 0.3 - 0.5 - 1 - 2Kgf (HV)
Analogue, 3 objectives, 0.01 - 0.025 - 0.05 - 0.1 - 0.2 - 0.3 - 0.5 - 1 - 2Kgf (HV)
Digital, 2 objectives, 0.01 - 0.025 - 0.05 - 0.1 - 0.2 - 0.3 - 0.5 - 1 - 2Kgf (HV)
Digital, 3 objectives, 0.01 - 0.025 - 0.05 - 0.1 - 0.2 - 0.3 - 0.5 - 1 - 2Kgf (HV)
• Main unit
• Manual X-Y stage
• Objectives according to model
(10x & 40x or 10x, 20x & 40x)
• Analogue eyepiece 15x (420AAT)
TECHNICAL SPECIFICATION
Test force selection
Manual
Test procedure Automatic, loading/dwell/unloading
Hardness value 5 digits
Turret 4 positions over 360º, fully automatic, memorised start position,
option for 2 indenters and 2 objectives or 1 indenter and 3 objectives
Test force accuracy < +/-1% for force from 100gr to 2kg, < +/-1.5%
for force below 100gr
User display Length of diagonals, hardness value, converted value,
test force, online statistics
Display resolution 0.1 HV, HK
Standardisation EN, ISO 6507, ASTM E-384, EN ISO 4545
Statistics Total test, max, min, average, range, standard deviation,
all in real time after each test
Control panel Start test, stop test, light intensity, dwell time, print, clear
Firmware English
Memory
Memory for 20 test results, with CCD-VIEW software unlimited results
Data output RS-232 Bi-Directional
Dwell time setting Default 5 seconds, user defined 1 to 60 seconds (5 sec. increments)
Printer Built in, silent high speed thermal printer
Eyepiece microscope Bright dual line filar eyepiece with 15x magnification, 0.1µm reading
Light source Halogen 12V, 30W, green filter, dimmable
Optical path 2 way, eyepiece / camera
Vertical capacity 90mm (maximum specimen height)
Horizontal capacity 120mm (from centre line)
Stage dimensions 100x100mm, travel 25x25mm, and reading 0.01mm
Operating temperature 5ºC to 40ºC (+/-20º for force 25gr and 50gr)
Humidity 10% to 90% non condensing
Dimensions 420 x 250 x 490mm
Weight
37.5Kg
Power 240V/110V, 50/60Hz, single phase
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P150-151.indd 151
• Digital eyepiece 15x (420DAT)
• Vickers test block (+/- 725 HV 1)
• Vickers test block (+/- 450 HV 0.2)
• Built-in thermal printer
• RS-232 data output
• 4 adjustable feet
• Set of work piece fixtures - vice, chuck & clamp
• Spare halogen bulb
• Fuse
• Installation & user’s manual
• Quality certificate
Optional Accessories
• Choice of objective configuration
• IMP Video measuring systems
• Dual indenter turret, Vickers & Knoop
• Motorised X-Y stage
• Motorised X-Y-Z stage (auto focus)
• Metal support table with storage cabinet
• Indenter & test blocks
• Certified indenter & test blocks
Optional System
• IMP system for semi and automatic traverses, pattern
testing through PC support and motorised XY stage
Partners in Precision
151
31/03/2014 09:58
TESTING
Premium Closed Loop Micro/Macro Vickers,
Knoop & Brinell Hardness Tester
NEXUS 4000 Series
High-end Vickers/Knoop/Brinell hardness testers with low and high forces ranging from HV0.01 to HV50. The NEXUS 4000 series features
state of the art Closed Loop, Load Cell, and Force feedback technology for a reliable fast measurement procedure.
Features
STAGES:
• Manual X-Y stage
• Motorised X-Y stage
• Motorised X-Y-Z stage
• IMPRESSIONS Video Measuring System
TURRET SYSTEM:
• Fully automatic 4 position turret for Micro Vickers / Macro Vickers
or Knoop measurements
• Featuring 3 objectives at choice, all 3 objectives can be used for
measuring and observation
INDENTERS:
• Vickers 136º
• Knoop 172.5º x 130º
• Brinell 1 & 2.5mm
EYEPIECE:
• Electronic eyepiece microscope with precision encoder providing
15x magnification
Standard Delivery
OBJECTIVES:
• Main unit
• 5x for 75x magnification
• Manual X-Y stage
• 10x for 150x magnification
• Flat anvil 60mm
• 20x for 300x magnification
• Objectives 5x, 10x, 20x or 10x, 20x, 40x
• 40x for 600x magnification
• Digital eyepiece 15x
• Vickers test block (+/- 700 HV10)*
• Vickers test block (+/- 700 HV30)*
• Built in thermal printer
• RS232 data output
• 4 adjustable feet
• Spare halogen lamp
• Installation & user manual
• Quality certificate
NEXUS 4000 SERIES TESTER
Code No
W-4300
W-4301
W-4302
W-4303
W-4304
W-4305
W-4500
W-4501
W-4502
W-4503
W-4504
152
Rockwell Scales
Vickers/Knoop
Brinell
Macro Vickers/Knoop
Micro/Macro Vickers/Knoop
Micro/Macro Vickers/Knoop/Brinell
Micro/Macro Vickers/Knoop
Vickers/Knoop
Brinell
Macro Vickers/Knoop
Micro/Macro Vickers/Knoop
Micro/Macro Vickers/Knoop/Brinell
Load Range
1Kgf - 30Kgf
1Kgf - 31.25Kgf
300gf - 30Kgf
20gf - 30Kgf
20gf - 31.25Kgf
10gf - 10Kgf
1Kgf - 50Kgf
1Kgf - 62.5Kgf
300gf - 50Kgf
100gf - 50Kgf
100gf - 62.5Kgf
• Set of work piece fixtures, vice, chuck, clamp
*May vary depending on model
Optional Accessories
• IMP video measuring system
• Motorised X-Y stage
• Motorised X-Y-Z stage
• Indenters & test blocks
• Certified indenters & test blocks
• Solid tester table & storage cabinet
For more information visit www.bowers.co.uk
BUK2014_P152-153.indd 152
31/03/2014 10:01
TESTING
Premium Closed Loop Micro/Macro Vickers, Knoop
& Brinell Hardness Tester NEXUS 4000 Series
High accuracy and repeatability through Closed Loop, Load Cell and Force feedback system, 11 models available.
TEST PROCEDURE CONTROL
Closed loop vs Dead weight
Closed loop vs Dead weight
Selected
Force
Selected
Force
Overshoot
seC
d
Co
m
lo
loso
epd
fo
loroc
pe fo
feer
cdeb
acek
fe
db
ack
mCo
onm
dm
eaon
d d
weea
igd w
ht e
syigh
ste t
msys
s te
m
s
Overshoot
Clo
Traditional hardness testing systems use a "dead weight"
mechanical design or inaccurate spring force mechanism to apply
the test force. Such systems lack test control as there is no feedback
on the actual applied force. The Closed Loop technology with
a force feedback system, as applied in the NEXUS 4000 series,
constantly measures and controls the applied force on the tester’s
indenter and tested surface. Consequently, this superior control
system offers an almost unlimited selection of test loads and test
rates for virtually any test condition imaginable.
Force
ACCURACY, RELIABILITY & EFFICIENCY
Time
Force
Time
Elimination of overshoot due to sophisticated algorithms detecting
contact with the indenter and the tested object’s surface.
Closed loop vs Dead weight
Closed loop vs Dead weight
Selected
Force
Selected
Force
Overshoot
Overshoot
seC
d lo
loso
epd
fo
loroc
pe fo
feer
cdeb
acek
fe
Co
db
m C
ack
mo
onm
dm
eaon
d d
weea
igd w
ht e
syigh
ste t
msys
s te
m
s
The application and removal of the test force is fully automatic,
as well as the positioning of the indenter and the pre-determined
objective. The result is an absolute vibration-free operation while
reducing the operator’s workload to a minimum.
Superior force control
Superior force control
Upgrades on the NEXUS 4000 series are available on request. For
instance, your budget and your requirements allow a Vickers tester;
your choice could be an Eseway Vickers / Knoop tester 4300. After
your purchase you can upgrade your tester from, for instance,
Vickers to Macro, Micro Vickers or even to Brinell at a fixed price.
The upgrades are possible in the 4300 or 4500 range. Investing in
an NEXUS 4000 series tester guarantees access to almost any load
application in the Vickers, Knoop and Brinell range up to 62.5kg.
Clo
UPGRADE
Force
Force
Time
Time
High speed measurement
High speed measurement
TECHNICAL SPECIFICATION
Test force selection
Test procedure Hardness value Loading speed Turret Test force accuracy User display Display resolution Hardness conversion Standardisation Statistics Control panel Firmware Memory
Data output Loading mechanism Dwell time setting Printer Eyepiece microscope Light source Optical path Vertical Range Horizontal Range Stage dimensions Operating temperature Humidity Dimensions Weight
Power Electronic, Closed Loop, Load Cell, Force feedback system, indication in Kgf or N. Test force selectable over menu operation
Automatic, loading/dwell/unloading
5 digits
Variable, depending on selected force
4 positions over 360º, fully automatic, memorised start position, option for 2 indenters and 2 objectives or 1 indenter and 3 objectives
< +/-1% for force from 100gr to 30kg, < +/-1,5% for force below 100gr
Length of diagonals, hardness value, converted value, test force, online statistics
0.1 HV, HK and HB
Rockwell, Rockwell Superficial, Brinell, Leeb & Tensile
EN, ISO 6507, EN ISO 6506, EN ISO 4545, ASTM E-384, ASTM E-10-08, ASTM E-384
Total test, max, min, average, range, standard deviation, all in real time after each test
Start test, stop test, light intensity, dwell time, print, clear, menu operation for date, time, scale and load settings, language
V2.01, German, English, French (standard), V2.02, English, Italian, Spanish
Memory for 20 test results, with INNOVAVIEW software unlimited results
RS-232 Bi-Directional
Fully automatic, Closed Loop, Force feedback, loading, dwell, unloading
Default 5 seconds, user defined 0 to 60 seconds
Built in, silent high speed thermal printer
Bright dual line filar eyepiece with 15x magnification, 0.1µm reading
Halogen 12V, 30 watt, green filter, dimmable
2 way, eyepiece / camera
165mm (maximum specimen height)
135mm (from centre line)
100x100mm, travel 20x20mm, and reading 0.01mm
5ºC to 40ºC (+/-20º for force 25gr and 50gr)
10% to 90% non condensing
220 x 540 x 650mm
51Kg
220V/110V, 50/60Hz, single phase
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P152-153.indd 153
Partners in Precision
153
31/03/2014 10:01
TESTING
IMPRESSIONS Video Measuring System
IMPRESSIONS is the new advanced user operating system that will be adopted on all future developments. The software incorporates manual
and automatic measurement for all scales, image editing, file storing, image storing, report printing, turret operation, manual or automatic
focusing and many other advanced functions.
All data can be copied or exported in to MS applications like Word, Excel, or a report generator that emails test results directly to your
workstation, or server. All data can be accessed over the LAN or WLAN connections.
Standard delivery
For manual X-Y stage - IMPRESSIONS software, CCD camera and C-mount included software for manual and automatic measurement of
indentations, Indent zoom function, automatic light adjustment, LCD industrial DVI touch screen included (IMP-2, IMP-3, IMP-4)
For motorized XY stage & auto focus - IMPRESSIONS software, motorized X-Y stage and motorized Z-axis. CCD camera and C-mount
included. Software for manual and fully automatic measurement of indentations. Indent zoom function, automatic indent focus, automatic
light adjustment, coordinate multi pattern testing module, motorized X-Y stage, LCD industrial touch screen included, virtual mouse function.
(IMP-5 and IMP-6)
IMPRESSIONS VIDEO MEASURING SYSTEM
Code No
W-IMP2
W-IMP3
W-IMP4
W-IMP5MV
W-IMP5V
W-IMP6MV
W-IMP6V
154
Description
IMPRESSIONS software for manual X-Y stage
IMPRESSIONS software with 1 analogue micrometer and 1 digital micrometer on XY stage
IMPRESSIONS software with 2 digital micrometers on manual XY stage
IMPRESSIONS software with 3Kg motorized XY stage and coordinate multi pattern testing module (for micro Vickers)
IMPRESSIONS software with 30Kg motorized XY stage and coordinate multi pattern testing module (for macro Vickers),
IMPRESSIONS software with 3Kg motorized XY stage with Z axis auto focus and coordinate multi pattern testing module. (for micro Vickers)
IMPRESSIONS software with 30kg motorized XY stage with Z axis auto focus and coordinate multi pattern testing module.(for macro Vickers),
For more information visit www.bowers.co.uk
BUK2014_P154-155.indd 154
25/03/2014 16:09
TESTING
Micro/Macro Vickers Hardness Tester
FALCON 500 Series
The FALCON 500 series, Micro Vickers, Vickers and Micro Brinell hardness testing machines are a new generation of instruments, improving
conventional hardness testing methods and focused on eliminating user influence on the test results. The unique force actuator system utilizes
an electronically controlled closed loop system and advanced force sensor technology, to achieve absolute accuracy, reliability and repeatability,
on each of the forces used for a test.
The innovative software functions of IMPRESSIONS software allow file storing, test program setting and storing, image zoom, auto focus,
limit settings, conversions to other hardness scales, system setup and (remote) control, pattern testing (CHD/Nht/Rht) and widely contributes
to the high reproducibility of test results. Fully automatic image evaluation combined with intuitive operator software avoid operator influence
on the test results.
W-501
W-501XL
Features
• Load cell, closed loop force control
• IMPRESSIONS operator control
• Auto Brightness
• Auto Contrast
• Auto Sharpness
• Auto Focus
• Automatic indent measurement
• 2 indenter positions, 4 objective positions
• 5mp HD camera
• High power LED vertical illuminator with filter position
• Anti-collision system
• Powerful Embedded Micro Controller; MS Windows,
80gb dual SSD data storage keyboard & mouse
• 15'' portrait mode, HD industrial touch screen on
adjustable table stand
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P154-155.indd 155
Partners in Precision
155
11/03/2014 07:55
TESTING
Micro/Macro Vickers Hardness Tester
FALCON 500 Series
Optional Accessories
• Overview camera
• Click & Go software option (requires motorised X-Y stage & Overview camera)
• Pattern testing (requires motorized X-Y stage)
• CHD, Nht, Rht (requires Pattern testing and motorized X-Y stage)
• Certified indenters
• Certified hardness test blocks
• Motorized X-Y stage
• 2nd indenter position
• 150mm Ø table
• Choice of objectives (see specification leaflet)
• V-anvil for 1-6mm
• V-anvil for 4-20mm
General functionality
Intuitive operator interface IMPRESSIONS
IMPRESSIONS software is the ultra-modern user interface of all Innovatest hardness testing machines. IMPRESSIONS offers unparalleled simplicity in operation
but yet, includes the most advanced functions found in hardness testing.
With only a minimum of operator skills required, IMPRESSIONS guides you through the set up process, in just seconds. Standard features, complex tasks and
advanced work flow at your fingertips.
Fully automatic image evaluation
IMPRESSIONS software evaluates sharpness and brightness of all camera images and measures the indentation independent of the operator. The automatic
adjustment of the picture parameters ensures reproducible test results, even for different materials and difficult, scratched or damaged test surfaces.
The standard fast auto-focus technology guarantees a sharp image of the indentation, in just a few seconds.
Overview & full view zoom camera
The optional overview & full view autofocus zoom camera with additional surface illumination, ensures a perfect overview or full view on your sample
or samples.
The combination of the zoom overview & zoom full view camera and superior measuring objectives ranges allow a viewing range of 60µm to 200mm.
This technology allows an overall picture of the test subject or subjects or a further magnified part of the object. The overview/full view images can also be
saved with the test report.
IMPRESSIONS 'click and go' functionality allows random test point selection on the screen, while the high speed motorized X-Y stage perfectly positions the
selected test point under the indentor and measuring objective.
Anvils, X-Y stage or CNC motorized X-Y stage
The basic version provides a manual X-Y stage and a plane anvil with all the requirements for quick and easy single tests.
The FALCON allows to expanded to a wide choice of motorized X-Y stages while the IMPRESSIONS tester control and workflow software has many advanced
positioning functions, from single indent to advanced pattern testing. The onboard controller allows up to 5 axis CNC work piece positioning.
Dynamic Z-Axis height adjustment
Intelligent precision positioning of the work piece is a standard feature on the FALCON series.
The 2 button control system allows ultra-fast pre-positioning, while the scroll wheel provides a pulse by pulse control on the actual fine adjustment on the
focus position.
* All FALCON models have a standard auto-focus system!
Dual view screen technology
The dual screen option gives the image of the overview camera (normally also provided on a single screen solution) next to the standard operator screen.
The advantage is that a larger image of the overview image can viewed simultaneous with the normal measurement camera images.
156
For more information visit www.bowers.co.uk
BUK2014_P156-157.indd 156
25/03/2014 16:11
TESTING
Micro/Macro Vickers Hardness Tester
FALCON 500 Series
TECHNICAL SPECIFICATION
Hardness scale
Load application
Load range
Motorized turret
Optical system
Objectives
Overview & full view
Electronic system
Test loads
Vickers test range
Brinell test range
Knoop
Indentors
Test cycles
Standards
Test force accuracy
Display resolution
Hardness conversion
Statistics
Data storage capacity
Connectivity
Dwell time setting
Printer
Manual stage dimensions
Operating temperature
Humidity
Machine dimensions
Machine weight
Power consumption
Power supply
(Micro/Macro) Vickers, Knoop & Brinell
Load cell, force feedback, closed loop system
1gf up to 62.5Kgf
6 positions; 2 indentor positions, 4 objectives positions
High definition, 5Mpx machine Vision system
2.5x, 5x, 10x, 20x, 40x, 60x, 100x
5Mpx optical ZOOM camera, field of view 35x35mm / 200x200mm
High performance embedded micro system controller, MS Windows® ,
15" full color industrial touch screen, automatic and manual measurement
1gf, 2gf, 3gf, 4gf, 5gf, 6gf, 7gf, 8gf, 9gf, 10gf, 20gf, 25gf, 50gf, 100gf, 200gf, 300gf, 500gf,
1kgf, 2kgf, 2.5kgf, 3kgf, 4kgf, 5kgf, 6.25kgf, 10kgf, 15.625kgf, 20kgf, 25kgf, 30kgf, 31.25kgf, 50kgf, 62.5kgf
HV0.001, HV0.002, HV0.003, HV0.004, HV0.005, HV0.006, HV0.007, HV0.008, HV0.009, HV0.010, HV0.020, HV0.025, HV0.050,
HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2, HV2.5, HV3, HV4, HV5, HV10, HV20, HV25, HV30, HV50
HB1/1kgf, HB1/2.5kgf, HB1/5kgf,
HB1/10kgf, HB1/30kgf;
HB2.5/6.25kgf, HB2.5/15.625kgf,
HB2.5/31.25kgf, HB2.5/62.5kgf
HK0.01, HK0.02, HK0.025, HK0.05,
HK0.1, HK0.2, HK0.3, HK0.5, HK1, HK2, HK5
Factory indentors or certified indentors (DKD, UKAS, ASTM) (optional)
Fully automatic, automatic and manual
Complies to or exceeds, ISO, ASTM, JIS (Nadcap) standards
<1% for test force 200gr to 62.5kg, <1.5% for test force below 100gr
0.1 HV, HK, 0.5 HB
Rockwell, Rockwell Superficial, Brinell, Leeb & Tensile
Total test, max, min, average, range, standard deviation, all in real time after each test
Dual SSD 80Gb, RAID system
2 USB ports, RJ45 Ethernet LAN, W-LAN, RS-232, Blue Tooth, 5 Axis CNC & motorized X-Y stage connector
Default 10 seconds, user defined 1 to 99 seconds (1 sec increments)
A4, A3 full colour laser printer (optional)
Stage
100mm x 100mm,
Travel
25mm x 25mm,
Reading
0.01mm
101⁄4C to 351⁄4C, non-condensing
10% to 90% non-condensing
485mm x 322mm x 683mm
525mm x 323mm x 773mm (XL)
60kg, 75kg(XL)
100W
100VAC to 240VAC, 50/60Hz, single phase
FALCON 500 SERIES TESTER
Code
W-501
W-502
W-503
W-504
W-505
W-506
W-507
W-508
W-509
W-5010
W-5011
Description
3gf - 2kgf, Vickers & Knoop
50gf - 10kgf, Vickers, Knoop & Brinell
10gf - 10kgf, Vickers, Knoop & Brinell
1gf - 10kgf, Vickers, Knoop & Brinell
200gf - 31.25kgf, Vickers, Knoop & Brinell
50gf - 31.25kgf, Vickers, Knoop & Brinell
10gf - 31.25kgf, Vickers, Knoop & Brinell
1gf - 31.25kgf, Vickers, Knoop & Brinell
200gf - 62.5kgf, Vickers, Knoop & Brinell
10gf - 62.5kgf, Vickers, Knoop & Brinell
1gf - 62.5kgf, Vickers, Knoop & Brinell
Code
W-501XL
W-502XL
W-503XL
W-504XL
W-505XL
W-506XL
W-507XL
W-508XL
W-509XL
W-5010XL
W-5011XL
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P156-157.indd 157
Description
3gf - 2kgf, Vickers & Knoop, large frame
50gf - 10kgf, Vickers, Knoop & Brinell, large frame
10gf - 10kgf, Vickers, Knoop & Brinell, large frame
1gf - 10kgf, Vickers, Knoop & Brinell, large frame
200gf - 31.25kgf, Vickers, Knoop & Brinell, large frame
50gf - 31.25kgf, Vickers, Knoop & Brinell, large frame
10gf - 31.25kgf, Vickers, Knoop & Brinell, large frame
1gf - 31.25kgf, Vickers, Knoop & Brinell, large frame
200gf - 62.5kgf, Vickers, Knoop & Brinell, large frame
10gf - 62.5kgf, Vickers, Knoop & Brinell, large frame
1gf - 62.5kgf, Vickers, Knoop & Brinelll, large frame
Partners in Precision
157
01/04/2014 08:17
TESTING
Universal Hardness Tester VERZUS 700 Series
The VERZUS 700 series is a new generation of hardness testing machines. Featuring closed loop system based on a precision load cell,
guarantees the best GR & R results ever seen on Universal hardness testers. Test forces ranging from 1 to 250kgf.
W-700-AS
Features
• Load cell, force feedback, closed loop system
• Unparalleled rigidity
• Unmatched GR & R results
• Load range 1kgf up to 250kgf depending on model
• Complies to all applicable EN/ISO, ASTM and JIS standards
• Shape correction settings for curved surfaces
• Optical depth measuring system (Rockwell, HBT, HVT, Hb)
• Powerful Embedded PC with 2 hard disks and HD industrial
touch screen (VERZUS 750 models)
• IMPRESSIONS™ high end video based hardness testing firmware
including CCD camera, automatic indent measurement, indent
ZOOM system, conversion to other hardness scales, test data &
image storage, statistic results storage, Jominy stage operation,
X-Y stage operation (VERZUS 750 models)
W-750-LCD
• Go / No Go function with visual and acoustic warning
(VERZUS 700 RS, RSB, AS models)
• Large memory for measurements with statistic results
(VERZUS 700 RS, RSB, AS models)
• Easy calibration function
• Testing program storage
• Standard nose cone clamping attachment
• Printer & USB-2 output (VERZUS 700 RS, RSB, AS models)
• External Brinell microscope with LED ring light (RSB model)
• Built on Vickers / Brinell microscope with LED ring light
(AS, CCD models)
• Work piece sliding table (AS, CCD models)
• Large work piece accommodation
• Motorised spindle (Optional)
• OLED full colour user-friendly interface, easy to operate
(VERZUS 700 RS, RSB, AS models)
158
For more information visit www.bowers.co.uk
BUK2014_P158-159.indd 158
25/03/2014 16:14
TESTING
Universal Hardness Tester VERZUS 700 Series
W-700-AS
TECHNICAL SPECIFICATION
Load application Hardness scales (RS)
Hardness scales (RSB)
Hardness scales (AS)
Hardness scales (LCD)
Hardness scales (CCD)
Load range (RS)
Load range (RSB/AS)
Load range (LCD)
Load range (CCD)
Test loads
Vickers test range Brinell test range Rockwell scales Rockwell superficial scales
Optical system (RS)
Optical system (RSB)
Optical system (AS)
Optical system (LCD)
Optical system (CCD)
Objectives (AS, CCD)
Eyepiece (AS,LCD)
Scale resolution (depth)
Display (RS,RSB,AS)
Display (LCD,CCD)
Standards Test cycles Force control Data output Specimen accommodation
Load cell, force feedback, closed loop system
Rockwell / Superficial Rockwell, HVT, HBT, Hb
Rockwell / Superficial Rockwell, Brinell, HVT, HBT, Hb
Rockwell / Superficial Rockwell, Brinell, Vickers, HVT, HBT, Hb
Rockwell / Superficial Rockwell, HVT, HBT, Hb
Rockwell / Superficial Rockwell, Brinell, Vickers, HVT, HBT, Hb
1kgf to 187.5kgf
1kgf to 250kgf
1kgf to 187.5kgf
1kgf to 250kgf
1, 2, 2.5, 3, 5, 10, 15, 15.625, 20, 30, 31.25, 45, 50, 60,
62.5, 100, 125,150, 187.5, 250kgf depending on model.
HV1, HV 2, 3, 5, 10, 20, 30, 50, 100, 120kgf;
HVT 50, 100kgf
HB1/2.5, 5, 10, 31.25kgf;
HB2.5/6.25,15.625, 31.25, 62.5, 187.5kgf;
HB5/25, 62.5, 125kgf;
HB10/100kgf;
HBT2.5/62.5, 187.5kgf
A, B, C, D, E, F, G, H, K, L, M, P, R, S, V
15N, 30N, 45N, 15T, 30T, 45T, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y
None
External Brinell microscope with LED ring light
Built on electronic microscope with 3 objectives and LED ring light
None
High resolution 5Mp video camera mounted on built on Microscope
Interchangeable 2.5x, 5x and 10x magnification with LED ring light (CCD)
10x magnification (15x optional)
0.1 micron
Full colour OLED display, testing results, statistics, built-in hardness calculator,
program overview, settings, calibration and many more
Large high definition industrial touch screen can also be operated by
mouse and keyboard
Complies to, or exceeds, EN/ISO, ASTM and JIS
Fully automatic, Load, Dwell, Unload
1- 99 seconds
USB-2.,RS-232 (RS,RSB,AS) RJ-45 LAN,W-LAN (LCD,CCD)
Height 300mm
Throat 200mm
W-750-LCD
Standard Delivery
• Brinell microscope with LED ring
light for dark field illumination
(AS, RSB, CCD)
• Objectives for 37.5x, 75x and 150x
magnification (AS, CCD)
• Sliding testing table (AS, CCD)
• Flat anvil, hardened, ø 60mm
• Testing table, hardened, ø 180mm
• V-anvil hardened ø 40mm
• Fuse 3A slow 2 pcs
• Power cable
• INNOVATEST® certificate
• Installation and user manual
• Test blocks and indenters optional
Optional Accessories
• Knoop hardness testing scale (CCD)
• V-Anvil 60mm
• Certified indenters
• Certified or factory reference
hardness blocks
• Long indenters
• Goose neck indenter holder
• Large testing table 300 x 200mm
with T-slot
• Custom testing tables
• Precision vices, V-blocks and
special clamps
UNIVERSAL HARDNESS TESTER VERZUS 700 SERIES
Code
W-700-RS
W-700-RSB
W-700-AS
W-750-RS
W-750-RSB
W-750-LCD
W-750-CCD
Description
Rockwell, Superficial Rockwell, HVT, HBT, Hb, Plastic ISO 2039/1
Rockwell, Superficial Rockwell, Brinell, HVT, HBT, Hb, Plastic ISO 2039/1
Rockwell, Superficial Rockwell, Brinell, Vickers, HVT, HBT, Hb, Plastic ISO 2039/1
Rockwell, Superficial Rockwell, HVT, HBT and Ball indentation for plastic ISO 2039/1
Rockwell, Superficial Rockwell, Brinell, HVT, HBT and Ball indentation for plastic ISO 2039/1
Rockwell, Superficial Rockwell, HVT, HBT, Hb, Plastic ISO 2039/1
Rockwell, Superficial Rockwell, Brinell, Vickers, HVT, HBT, Hb, Plastic ISO 2039/1
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P158-159.indd 159
Partners in Precision
159
01/04/2014 07:59
TESTING
Universal Hardness Tester NEXUS 7501 Series
The NEXUS 7501 universal hardness tester is based on the successful NEXUS 7000 load cell closed loop concept with indenter/objective
swivel system.
The NEXUS 7501 is a hardness tester for all hardness procedures according to Rockwell, Superficial Rockwell, Brinell, Vickers and Knoop. Also
possible are ball and indentation hardness testing for thermo plastics and the new Vickers depth (HVT) and Brinell depth (HBT) procedures.
The load range goes from 1 to 250kgf (optional from 0.5kgf). All procedures complying to EN/DIN/ISO, ASTM and JIS.
The new user interface IMPRESSIONS guarantees hassle free tester operation with a minimum amount of training. IMPRESSIONS
allows you to operate the tester's main functions but also incorporates advanced algorithms for automatic impression detection and
hardness measurement.
W-7501
160
For more information visit www.bowers.co.uk
BUK2014_P160-161.indd 160
02/04/2014 08:56
TESTING
Universal Hardness Tester NEXUS 7501 Series
W-7501
TECHNICAL SPECIFICATION
Hardness scales
Optical
Load range
Display
CPU
Firmware
Standards
Test load type
Test cycle
Test loads
Brinell test procedures
Vickers test procedures
Rockwell test procedures
Indenter types (included)
Load duration
Connectivity
Specimen accommodation
Specimen access
Dimensions
Weight
Power Supply
Brinell, Vickers,
Rockwell, Superficial Rockwell,
Knoop, Vickers depth (HVT),
Brinell depth (HBT), Plastic
5 mega-pixel HD camera, indent zoom function
1-250kgf
High resolution industrial LCD touch screen
Optional: desk top LCD screen
Optional: desk top LCD touch screen
Optional: Height adjustable LCD touch screen
Embedded high performance PC with 2 solid state HD drives
Optional: External high performance PC
IMPRESSIONS, advanced hardness testing software including options for:
manual measurement, automatic measurement, indent zoom function, scale,
conversion, file storage, report printing, test program storage, machine settings
storage, graphic interface for swivel system position
Conforms to ISO 6506, 6507, 6508, 4545,
ASTM E18, E92, E10 & JIS
Loadcell closed loop, force feedback system
Complies to EN/ISO and ASTM standards
Automatic and indent evaluation
(0,5*) 1, 3, 5, 10, 15, 15.625, 20, 30, 31.25, 50, 60, 62.5, 100, 125,
150, 187.5, 250kgf
HB1 1, 2.5, 5, 10, 30
HB2.5: 6.25, 15.625, 31.25, 62.5, 187.5
HB5: 25, 62.5, 125, 250
HB10: 100, 250
HV (0,5*) 1, 2, 3, 5, 10, 20, 30, 50, 100
A, B, C, D, E, F, G, H, K, L, M, P, R, S, V,
Bm, Fm, 15N, 30N, 45N, 15T, 30T, 45T,
15W, 30W, 45W, 15X,30X, 45X, 15Y, 30Y, 45Y,
30 TM, HMR 5/25
Brinell Balls: 1, 2.5, 5, 10mm
Vickers Diamond: 136º
Rockwell Diamond Cone: 120º
Balls: 1/16 in, 1/8 in, 1/4 in, 1/2 in
0.1-255 seconds
USB-2(6) RS-232, UTP RJ45, LAN, W-LAN
Maximum test height 300mm, maximum throat 220mm
External surfaces,internal surfaces with goose neck adapter (optional)
620mm x 250mm x 900mm (L x W x H)
170kg
230V / 50Hz other voltages and/or frequencies on request
Standard Delivery
• Objective for 70x magnification
• Objective for 140x magnification
• Clamping protection nose
• Testing table Ø80mm
• Power cable
• Installation & user manual
• INNOVATEST® certificate
• Test blocks and indenters optional
Optional Accessories
• Objectives for 10x, 20x,
44x magnification
• Testing table Ø150mm
• Testing table Ø235mm
• V-Anvil Ø80mm
• V-Anvil Ø120mm
• Certified indenters and hardness
test blocks
• Long Vickers indenter
• Other testing tables and XY stages
• Precision vices, V-blocks and
special clamps
• Software solutions for
advanced application
UNIVERSAL HARDNESS TESTER NEXUS 7501 SERIES
Code
W-7501
Description
Universal hardness tester with video indent measuring system
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P160-161.indd 161
Partners in Precision
161
01/04/2014 08:00
TESTING
Universal Hardness Tester NEXUS 8000 Series
The NEXUS 8000 Series can be used for all hardness procedures according to standards Rockwell, Superficial Rockwell,
Brinell, Vickers and Knoop. But it is also capable of ball and indentation hardness testing for thermoplastics and the new
Vickers depth (HVT) and Brinell depth (HBT) procedures. The NEXUS 8000 universal hardness testers include all standard
hardness testing methods between 1kgf - 250kgf(8001), 3kgf - 750kgf(8002), 10kgf - 3000kgf(8003). All procedures
meet or exceed DIN, ISO, ASTM and JIS standards.
TECHNICAL SPECIFICATION
Hardness scales
Rockwell, Vickers, Brinell, Vickers depth (HVT), Brinell depth (HBT),
Ball indentation for plastic ISO 2039/1
Load application
Load cell, force feedback, closed loop system
Load range
1kgf - 250kgf (NEXUS 8001)
3kgf - 750kgf (NEXUS 8002
10kgf - 3000kgf (NEXUS 8003)
Motorized turret
3 indentor positions, 3 objectives positions
Optical system
High definition, 5Mp machine Vision system
Objectives
3 installed for 0.7x - 1000x magnification
Electronic system
High performance embedded micro PC, MS Windows®,
15" full color touch screen, automatic and manual measurement
Standards Meets or exceeds, ISO, ASTM, JIS (Nadcap) standards
Rockwell test scales A, B, C, D, E, F, G, H, K, L, M, P, R, S, V, 15N, 30N, 45N, 15T, 30T, 45T, 15W,
30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y (8003 no superficial scales)
Vickers test range 1kgf - 120kgf (depending on model)
HV:
1kgf, 2kgf, 3kgf, 4kgf,
5kgf, 10kgf, 20kgf, 30kgf,
50kgf, 100kgf, 120kgf
HVT: 50kgf, 100kgf
Brinell test range
1kgf - 3000kgf (depending on model)
HB1:
1kgf, 2.5kgf, 5kgf, 10kgf, 30kgf
HB2.5:
6.25kgf, 15.625kgf, 31.25kgf,
62.5kgf, 187.5kgf
HB5:
25kgf, 62.5kgf, 125kgf, 250kgf
HB10:
100kgf, 250kgf, 500kgf,
750kgf, 1000kgf, 1500kgf, 3000kgf
HBT:
5kgf, 250kgf
Test cycles
Fully automatic, automatic and manual
Force tolerance
<0.5%
Force control
1 - 99 seconds
Connectivity
USB (4), UTP-RJ45-LAN, W-LAN, RS232, Motorized X-Y stage
Workpiece Vertical capacity 350mm,
accommodation Horizontal capacity 250mm (from center-line)
Operating temperature10ºC to 35ºC, non-condensing
Machine dimensions 380mm x 753mm x 1390mm
Machine weight 425kg
Power supply 100V AC to 240V AC, 50Hz/60Hz, single phase
UNIVERSAL HARDNESS TESTER NEXUS 8000 SERIES
Code No
W-8001
W-8002
W-8003
162
Description
Universal hardness tester with video indent measuring system with Brinell,
Vickers, Rockwell, Superficial Rockwell, Knoop, HVT, HBT, Ball indentation,
test forces 1kgf - 250kgf
Universal hardness tester with video indent measuring system with Brinell,
Vickers, Rockwell, Superficial Rockwell, HVT, HBT, Ball indentation,
test forces 3kgf - 750kgf
Universal hardness tester with video indent measuring system with Brinell,
Vickers, Rockwell, HVT, HBT, Ball indentation, test forces 10kgf - 3000kgf
Standard Delivery
• Flat anvil, hardened, Ø 80mm
• V-anvil, hardened, Ø 80mm
• Testing table, hardened, Ø 200mm
• Ringlight for (Brinell) dark field illumination
• Power cable
• Four adjustable feet
• INNOVATEST® calibration certificate
• Installation and user manual
Optional Accessories
• Flat anvil, hardened, Ø 80mm
• V-anvil, hardened, Ø 80mm
• Testing table, hardened, Ø 200mm
• Ringlight for (Brinell) dark field illumination
• Power cable
• Four adjustable feet
• Calibration certificate
• Installation and user manual
For more information visit www.bowers.co.uk
BUK2014_P162-163.indd 162
02/04/2014 09:00
TESTING
Heavy Duty Universal and Brinell Hardness Tester
NEXUS 8000XL Series
The sturdy design of the NEXUS 8000XL Series allows rough workshop conditions. The tester can be used for measuring
hardness according to global standards in most of the common hardness scales:Rockwell, Superficial Rockwell, Brinell,
Vickers and Knoop. But it is also capable of ball and indentation hardness testing for thermoplastics and the Vickers
depth (HVT) and Brinell depth (HBT) procedures. The NEXUS 8000XL Universal hardness testers applies all common test
forces between 1kgf - 250kgf (8001XL), 3kgf - 750kgf (8002XL), 10kgf - 3000kgf (8003XL). All procedures meet or
exceed DIN, ISO, ASTM and JIS standards.
TECHNICAL SPECIFICATION
Hardness scales
Rockwell, Vickers, Brinell, Vickers depth (HVT), Brinell depth (HBT),
Ball indentation
for plastic ISO 2039/1
Load application
Load cell, force feedback, closed loop system
Load range
1kgf - 250kgf (8001XL),
3kgf - 750kgf (8002XL),
10kgf - 3000kgf (8003XL)
Motorized turret
3 indenter positions, 3 objectives positions
Optical system
High definition, 5Mp machine Vision system
Objectives
3 installed for 0.7x - 1000x magnification
Electronic system
High performance embedded micro system controller, MS Windows® ,
15" full color touch screen, automatic and manual measurement
Standards Meets or exceeds, ISO, ASTM, JIS (Nadcap) standards
Rockwell test scales A, B, C, D, E, F, G, H, K, L, M, P, R, S, V, 15N, 30N, 45N, 15T, 30T, 45T, 15W,
30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y (8003XL no superficial scales)
Vickers test range
1kgf - 120kgf (depending on model)
HV:
1kgf, 2kgf, 3kgf, 4kgf,
5kgf, 10kgf, 20kgf, 30kgf,
50kgf, 100kgf, 120kgf
HVT:
50kgf, 100kgf
Brinell test range
1kgf - 3000kgf (depending on model)
HB1:
1kgf, 2.5kgf, 5kgf, 10kgf, 30kgf
HB2.5:
6.25kgf, 15.625kgf, 31.25kgf,
62.5kgf, 187.5kgf
HB5:
25kgf, 62.5kgf, 125kgf, 250kgf
HB10:
100kgf, 250kgf, 500kgf,
750kgf, 1000kgf, 1500kgf, 3000kgf
HBT:
5kgf, 250kgf
Test cycles
Fully automatic, automatic and manual
Force tolerance
<0.5%
Force control
1 - 99 seconds
Connectivity
USB (4), UTP-RJ45-LAN, W-LAN, RS232, Motorized X-Y stage
Workpiece Vertical capacity 520mm
accommodation
Horizontal capacity 300mm (from center-line)
Operating temperature10ºC to 35ºC, non-condensing
Machine dimensions 380mm x 830mm x 1680mm
Machine weight
540kg
Power supply
100V AC to 240V AC, 50Hz/60Hz, single phase
Standard Delivery
• Workpiece clamping attachment
• Large work piece table 600mm x 500mm
with T slot
• Ringlight for (Brinell) dark field illumination
• Wireless mouse and keyboard
• Power cable
• Four adjustable feet
HEAVY DUTY UNIVERSAL AND BRINELL HARDNESS TESTER
NEXUS 8000XL SERIES
Code No
W-8001XL
W-8001XLM
W-8002XL
W-8002XLM
W-8003XL
W-8003XLM
Description
Universal hardness tester, tall version, with video indent measuring system Brinell, Vickers,
Rockwell, Superficial Rockwell, Knoop, HVT, HBT, Ball indentation, test forces 1kgf-250kgf
Universal hardness tester, tall version with motorized spindle and video indent measuring
system Brinell, Vickers, Rockwell, Superficial Rockwell, Knoop, HVT, HBT, Ball indentation,
test forces 1kgf-250kgf
Universal hardness tester, tall version, with video indent measuring system Brinell, Vickers,
Rockwell, Superficial Rockwell, HVT, HBT, Ball indentation, test forces 3kgf-750kgf
Universal hardness tester, tall version with motorized spindle and video indent measuring
system Brinell, Vickers, Rockwell, Superficial Rockwell, HVT, HBT, Ball indentation,
test forces 3kgf-750kgf
Universal hardness tester, tall version, with video indent measuring system Brinell, Vickers,
Rockwell, HVT, HBT, Ball indentation, test forces 10kgf-3000kgf
Universal hardness tester, tall version with motorized spindle and video indent measuring
system Brinell, Vickers, Rockwell, HVT, HBT, Ball indentation, test forces 10kgf-3000kgf
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P162-163.indd 163
• INNOVATEST® calibration certificate
• Installation and user manual
Optional Accessories
• Certified indenters
• Factory reference hardness blocks
• Certified reference hardness blocks
• Testing table, hardened, Ø 200mm
• Flat anvil, hardened, Ø 80mm
• V-anvil, hardened, Ø 80mm
• Motorised X-Y stages, motorised rotary
or tilting tables
• Built-in 5 axis support driver
• Solid tester stand and storage cabinet
Partners in Precision
163
02/04/2014 09:00
TESTING
Universal Hardness Tester NEMESIS 9000 Series
The NEMESIS 9000 Series represents the latest top of the range
development in universal hardness testing. Modern design, innovated
technology, multi purpose hardness testing instrument, based on the
application of mechatronic components and high resolution video
machine vision systems. A superior level of precision combined with
high definition imaging creates an almost unlimited field
of applications.
The NEMESIS 9000 Series represents universal hardness testing in the
most versatile meaning. Aircraft engine parts, automobile parts,
production lines, general quality assurance and laboratory use are all
fields covered by the NEMESIS 9000 Series.
Manual operation or full scale automation to the highest possible level
are both standard on the NEMESIS 9000.
The NEMESIS 9000, Load Cell, Closed loop, Force feedback system is
suitable for the following:
Optical Hardness Testing Methods:
• Vickers (HV), EN ISO 6507, ASTM E 92
• Knoop (HK) ISO 4545, 4546
• Brinell (HB) EN ISO 6506, ASTM E 10
Depth Measuring Hardness Testing Methods:
• Rockwell (HR) EN ISO 6508, ASTM E 18
• Vickers depth measurement HVT VDI/VDE 2616-1
• Brinell depth measurement HBT VDI/VDE 2616-1
• Ball indentation hardness (H) (ISO 2039-1) (plastics)
Features
• Rockwell, Superficial Rockwell, Vickers, Knoop, Brinell, Ball
indentation, HVT and HBT scales
• Built-in hard disk offers nearly endless file storing, standard
• Superior range of test loads/force application ranging from
1kgf to 3000kgf (over 3 models)
• On board built-in driver for (optional) motorised X-Y
stage, standard
• Fixed work piece position (no spindle)
• Descending test head with automatic work piece detection
• Free definable test patterns case depth, traverse, free style,
etc., optional
• Free definable, manual or motorised 6 position turret for objectives
and indenters of choice
• Machine covers made of shock, damage and fire proof
recyclable materials
• High definition optical system for images of 0.7x to
1000x magnification
• Large range of optional accessories
• PC based hardness testing firmware and database file
system as standard
• Large, adjustable 15" industrial touch screen
• Automatic or manual focus, manual or fully automatic
indent measurement standard
164
• LAN, WLAN, USB-2, RS-232, Printer and DVI connectivity, standard
•Large test piece accommodation H=300mm, D=220mm
can be upgraded to a taller frame of, for instance,
H=450mm, D=220mm or 300mm; even years after purchasing
the tester
• 3 years free firmware upgrade, standard
• Designed and manufactured in The Netherlands
For more information visit www.bowers.co.uk
BUK2014_P164-165.indd 164
31/03/2014 10:22
TESTING
Universal Hardness Tester NEMESIS 9000 Series
TECHNICAL SPECIFICATIONS
W-9001 Universal
W-9002 Universal
W-9003 Universal
W-9004 Pure Rockwell W-9005 Pure Vickers W-9006 Pure Brinell
Scales / Test Loads/Force 1kgf to 250kgf 3kgf to 750kgf
10kgf to 3000kgf 3kgf to 150kgf
1kgf to 120kgf
Rockwell, A, B, C, D, E, F, G, H, K, L, M, P, R,V All scales All scales
All scales All scales
No
Superficial Rockwell, N, T, X, Y All scales All scales
No
All scales
No
Macro Rockwell HRM Yes Yes
Yes
Yes
No
Vickers HV 1kgf to 120kgf 3kgf to 120kgf
10kgf to 120kgf
No
500gf to 120kgf
Knoop All scales All scales
No
No
All scales
HVT 50, 100kgf 50, 100kgf
50, 100kgf
No
No
Brinell 1kgf to 250kgf 3kgf to 750kgf
10kgf to 3000kgf
No
No
HBT 5/2505/2505/250No
No
H (ball indentation) Up to 250kgf Up to 750kgf
Up to 3000kgf
No
No
Force Application System
Linear force actuator
StandardStandardStandardStandard
Standard
Load cell, closed loop, force feed back system
Standard
Standard
Standard
Standard
Standard
Motorised heavy duty TURRET with 6 positions
Standard
Standard
Standard
Standard
Standard
Indenter positions
3
3
3
3 (or 6, option)
3
Objective positions
333None 3
LED optical indent illumination
Standard
Standard
Standard
None
Standard
LED ring light indent illumination
Optional
Optional
Optional
None
Optional
175-200
0.007
Optical Measuring System
5 mega pixels optical ZOOM system Standard
Standard
Standard
None
Standard
Auto focus
StandardStandardStandardNo
Standard
Manual focus
StandardStandardStandardNo
Standard
Fully automatic indent measuring
Standard
Standard
Standard
No
Standard
Manual on screen indent measuring
Standard
Standard
Standard
No
Standard
Zoom and magnification ratio
0.7x to 1000x
0.7x to 1000x
0.7x to 1000x
No
0.7x to 1000x
Dual view working area overview camera
Optional
Optional
Optional
No
Optional
External Electronic Brinell microscope and objectives No
No
No
No
No
Depth Measurement System
Heidenhain™ high resolution scale & reading head Standard
Standard
Standard
Standard
No
Hardware & User Interface
Built-in industrial Pentium PC and harddrive
Standard
Standard
Standard
Standard
Standard
Adjustable 15" full color industrial touch screen
Standard
Standard
Standard
Standard
Standard
MS Windows 7 Ultimate license
Standard
Standard
Standard
Standard
Standard
W-9000 hardness testing firmware
Standard
Standard
Standard
Standard
Standard
Automatic image and file storage
Standard
Standard
Standard
No
Standard
Stores and handles 3000 files & images
Standard
Standard
Standard
Standard
Standard
Stores and handles 9000 files & images
Optional
Standard
Standard
Standard
Standard
Forms 9000 set of customised certificates
Optional
Standard
Standard
Standard
Standard
Universal motorised X-Y stage controls Standard
Standard
Standard
Standard
Standard
Connectivity
External digital (DVI) TFT screen output Standard
Standard
Standard
Standard
Standard
External keyboard & mouse connections
Standard
Standard
Standard
Standard
Standard
LAN (local area network connection)
Standard
Standard
Standard
Standard
Standard
WLAN (Wireless network connection)
Standard
Standard
Standard
Standard
Standard
Bi-directional RS-232
StandardStandardStandardStandard
Standard
Printer / USB-2 output
Standard
Standard
Standard
Standard
Standard
Built-in motorized X-Y stage driver
Standard
Standard
Standard
Standard
Standard
10kgf to 3000kgf
No
No
No
No
No
No
10kgf to 3000kgf
No
Up to 3000kgf
Standard
Standard
No
None
None
None
None
None
No
No
No
No
No
No
Standard
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Standard
Standard
No
Work piece accommodation height: 3
00mm (opt. 500mm)
Power: 2
20volt / 50Hz, others on request
Work piece accommodation horizontal: 2
20mm from center
Objectives: 3
installed for 0.7x to 1000x
Machine dimensions: 1
400mm x 420mm x 640mm (HxWxD)
Force tolerance: M
ax. < 1%
Machine weight: 242kg
Force control: 1
-99 sec.
Tester colour (standard): B
lack / Metallic silver
Hardness resolution: 0.01 Rockwell, 0.1 Vickers, 1 Brinell
Light source: W
hite power LED (Opt. green/blue/red)
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P164-165.indd 165
Partners in Precision
165
31/03/2014 10:22
TESTING
Universal Hardness Tester NEMESIS 9500 Series
Load cell, closed loop,
linear force actuator,
fixed workpiece position
Force configuration for
maximum 250kgf, 750kgf
or 3000kgf
High performance PC, Windows 7
operating system with refined algorithms
for automatic image measuring system
15" high
resolution
industrial
touch-screen
6 positions modular motorised turret,
5 Mp built-in camera,
Optional overview camera
LED illumination,
LED ringlight
Microscope quality
optical system with
long working distance
objectives
Motorised spindle
W-9501
166
For more information visit www.bowers.co.uk
BUK2014_P166-167.indd 166
25/03/2014 16:19
TESTING
Universal Hardness Tester NEMESIS 9500 Series
The NEMESIS 9500 is the universal hardness tester most suitable for heavy duty testing in the Eseway standard range of testers. Partly based
on the technology of the NEMESIS 9000. Built for tough environments, the floor type welded frame reaches a height of 2 meters and offers
a work space of not less than 650mm height and a throat depth of 300mm.
Rockwell, Vickers and Brinell, but also pure depth test methods such as H, HVT and HBT are part of the standard test procedures of the
NEMESIS 9500. 3 models cover a range of test loads either up to 250kgf, 750kgf or 3000kgf.
The frame of the NEMESIS 9500 is equipped with a heavy duty motorised spindle, allowing positioning of the test piece on the required
working height. The NEMESIS 9500 has a descending test head allowing each test piece to be tested on an ergonomic working height. The
linear actuator of the NEMESIS 9500 is equipped with a load cell closed loop system guaranteeing excellent accuracy and a wide range of
fast testing procedures.
The test head is equipped with a 6 positions modular turret (indenters and objectives) and an optical zoom video system
with 5mp HD camera. High performance PC driven automatic and manual indent measurement with automatic filing and storage functions.
Refined algorithms for automatic measurement on materials normally less suitable for automatic measurement.
Three years free firmware upgrade as standard.
TECHNICAL SPECIFICATION
Hardness scales Load application
Load range
Motorised turret
Optical system
Objectives
Scale resolution
Electronic system
Standards
Test loads
Vickers test range
Brinell test range
Rockwell test scales
Test cycles
Force control
Connectivity
Specimen accommodation
Machine dimensions
Machine weight
Power supply
Brinell, Vickers, Rockwell, HVT, HBT
Load cell, force feed back, closed loop system
1-250kgf, 3-750kgf, 10-3000kgf
3 indenter positions; 3 objectives positions
High definition, 5Mp machine Vision system
3 installed for 0.7x-1000x magnification
0.0005mm (0.5 micron)
High performance built-in PC, Windows 7,
15" full color touch screen, automatic and
manual measurement
Complies to all applicable EN/ISO and
ASTM standards
1, 2, 2.5, 3, 5, 10, 15, 15.625, 20, 30, 31.25, 45,
50, 60, 62.5, 100, 125, 150, 187.5, 250, 750, 3000kgf
1 - 120kgf (depending on model)
1 - 3000kgf (depending on model)
A, B, C, D, E, F, G, H, K, L, M, P, R, S, V
Automatic & Manual
2-99 seconds
USB-2, Blue tooth, WLAN, LAN
Max. height: 650mm
Max. throat: 400mm
2125mm x 998mm x 540mm (HxDxW)
1100kg
220V / 50Hz others on request
Standard Delivery
• Motorised turret with 6 positions
• Objectives for 0.7x-1000x magnification
• Built-in 3 axis support driver
• Large testing table
• Installation & user manual
• Innovatest calibration certificate
• Toolset
• Test blocks and indenters optional
Optional Accessories
• Built-in 5 axis support driver
• Testing table Ø235mm
• V-Anvil Ø80mm
• V-Anvil Ø120mm
• Certified indenters & hardness
test blocks
• Long Vickers indenter
• Other testing tables and XY-stages
• Precision vices, V-blocks and
special clamps
UNIVERSAL HARDNESS TESTER NEMESIS 9500 SERIES
Code
W-9501
W-9502
W-9503
Description
Heavy duty, video based universal hardness tester, test forces 1kgf to 250kgf
Heavy duty, video based universal hardness tester, test forces 3kgf to 750kgf
Heavy duty, video based universal hardness tester, test forces 10kgf to 3000kgf
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P166-167.indd 167
Partners in Precision
167
01/04/2014 08:00
TESTING
Hardness Reference Blocks For All Scales
With official calibration certificates UKAS, DKD or ASTM.
CV Instruments hardness reference blocks are used for annual verification and
calibration of hardness testing machines, as well as for periodical check and
sometimes for overtaking of hardness scales on a hardness testing machine. That’s
why hardness reference blocks are a necessary help of industrial Quality
Management. Only the use of high quality, precise hardness reference blocks
calibrated to applicable standards can ensure the functionality and relative reliability
and accuracy of measurement of a hardness testing machine.
The hardness reference blocks used for indirect verification should conform largely
to the workpiece to be tested, in terms of material characteristics and hardness
range. For this reason a hardness reference block made of aluminium was
developed for the lower hardness range which can not be covered by steel, using
new materials technology methods.
When using hardness reference blocks it is irrelevant whether the value of the
nominal hardness to be delivered corresponds exactly to the actual calibration value
observed, since scale adaptation should be carried out with at least two hardness
values.
A hardness reference block shall only be used as according to the standards to that
method and test condition for which it was calibrated.
CV Instruments certified hardness reference blocks are available as follows and all
conform to the international standards as mentioned above.
Hardness reference “soft” blocks made of aluminium
These CV Instruments reference blocks are available with DKD/MPA certificate only.
For several years there has been a need for “soft” blocks.
Using new materials technology methods, it is now possible to produce blocks
made of aluminium.
They are available in lower nominal values in Rockwell, Brinell and Vickers scales.
Ask for our separate sales list.
TECHNICAL SPECIFICATION
All CV Instruments hardness reference block certificates are based on following international standards:
Brinell
DIN-EN-ISO 6506-3
ASTM E 10
Vickers
DIN-EN-ISO 6507-3
ASTM E 92 / E 384
Rockwell
DIN-EN-ISO 6508-3
ASTM E 18
Knoop
ISO 4545-3
ASTM E 384
Rockwell carbide
DIN 30999
ISO 3738
Martens hardness
DIN 50359
ISO DIS 14577
CV Instruments certified hardness reference blocks are available as follows and
all conform to the international standards as mentioned above.
Scale
Regular Rockwell (all scales)
Superficial Rockwell (all scales)
Brinell (all scales)
Macro Vickers (all scales)
Micro Vickers (all scales)
Knoop Martens hardness
UKAS
Yes
Yes
Yes
Yes
Yes
Yes
Yes
DKD
Yes
Yes
Yes
Yes
Yes
Yes
Yes
DKD/MPA
Yes
Yes
Yes
Yes
Yes
Yes
Yes
ASTM
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CV
Yes
Yes
Yes
Yes
Yes
Order your blocks based on nominal values.
Please ask for our separate product list of nominal hardness values available per hardness scale and type of certificate.
168
For more information visit www.bowers.co.uk
BUK2014_P168-169.indd 168
25/03/2014 16:21
TESTING
CV Portable Analogue Hardness Tester
- CV Instrumatic
A fully mechanical instrument of the highest precision, robust, and maintenance free. The large clearly marked dials on these unique
instruments cover a full range of hardness values in Vickers, Brinell, Rockwell A, B, C, covering national and international standards.
The Instrument
The system is entirely mechanical employing the use of special pre-loaded springs which provide a load of about 15Kg to the diamond.
Maximum penetration of the diamond into the specimen is 0.125mm (0.005").
Operation and Use
The simplicity of the tester enables it to be used in almost any direction, without affecting accuracy. It can be used ‘on site’ with complete
success. The grips are depressed to the fullest extent by using the palms of the hands and the hardness value can be read off the appropriate
scale. Repeatability is excellent and the calibration can be checked by the user against a UKAS certified reference test block supplied with each
instrument. Each tester is supplied complete with case and detailed operating instructions.
Features
• Accurate and easy to use
• No batteries required
• UKAS certified test block supplied
• Optional bench stand with V base for round parts
• Precision Instrument
• Able to test even thin materials due to low
penetration of indenter (0.25mm and above)
• Bench stand available for testing small components
• No. 3 - general purpose
PORTABLE ANALOGUE HARDNESS TESTER
Code No
POR0002
POR0003
POR0006
PBS0001
Description
No. 2
No. 3
No. 6
Precision Bench Stand
Scale
Rockwell A
Vickers Pyramid
Brinell
Range (mm)
40-85
100-1000
40-300
Scale
Vickers Pyramid
Brinell
Vickers Pyramid
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P168-169.indd 169
Range (mm)
50-100
100-400
40-300
Scale
Brinell
Rockwell B
Range (mm)
20-70
50-99
Scale
Range (mm)
Rockwell C
20-70
Partners in Precision
169
25/03/2014 16:21
TESTING
CV Portable Digital Hardness Tester
The Bowers CV Rangemaster Plus Hardness Tester represents an ideal solution to the problems associated with portable
hardness testing. Its clear digital display, ease of use and ability to operate in all major international scales make it the most
comprehensive unit of its type currently available. The optional sturdy bench stand adds further to the flexible nature of
this ergonomic gauge.
Features
• Dynamic test indicator
• Large digital readout
• Hardness values in all major international scales with simple
conversion facilities from one to the other
• RS232 output for connection to PC or serial printer
• Memory storage range for in excess of 400 readings
• Statistical summary
• Integral icon facility provides operator with easy visual
identification of mode in which unit is operating
• Operates in temperatures from -5ºC to +35ºC
• Upper and lower control limits
• Last reading recall
• Supplied with two UKAS certified test blocks, adjuster key
and carrying case
TECHNICAL SPECIFICATION
Hardness Scale
Testing Range
Resolution
Power
Output
Vickers Pyramid No., Brinell, Rockwell B, Rockwell C,
Tensile Strength,Shore Scleroscope
Vickers Pyramid No. 35-1000
Brinell 100-500
Rockwell B 30-100
Rockwell C 20-70
Tensile Strength 255-1999 N/mm≈
Shore Scleroscope 24-97
1
Vickers Pyramid No., Brinell, Tensile Strength, Shore Scleroscope
0.1 Rockwell B, Rockwell
9V battery or adaptor
RS-232 serial output
CV RANGEMASTER
PLUS HARDNESS TESTER
Code No
RANP001
PBS0001
RAN0004
170
Description
Rangemaster
Precision Bench Stand
RS232 PC Connection Cable
Standard Delivery
• Main unit
• 2 UKAS certified test blocks
• Case
• Adjusting keys
• CV Instruments certificate
• Manual
Optional Accessories
• Bench stand
• RS-232 cable
For more information visit www.bowers.co.uk
BUK2014_P170-171.indd 170
25/03/2014 16:22
TESTING
Universal Portable Hardness Tester
- TH-1100 Series
The new entry-level TH-1100 offers a very affordable but accurate hardness testing solution for on-site testing in workshops and in field
operations. The unit assures accurate and reliable measurement.
Any metallic products with a minimum solid mass of 2 kg can be tested according to the Leeb principle. The display shows hardness values
in all common scales, such as HLD, HB, HRC, HRA, HRB, HV and HS. The instrument is equipped with chargeable batteries that provide
16 hours continuous operation.
Features
• Direct display of hardness values in Rockwell HRB, HRC, Vickers HV,
Brinell HB, Shore HS, Leebs (HLD)
• Test results appear directly on the large display
• Impact Device D integrated: no cables
• Memory up to 99 data group files
• Tests at any angle, even upside down
• High quality LCD display
• Battery Range display
TECHNICAL SPECIFICATION
Standard impact device
Hardness scales Measuring range/materials Tolerance Memory Output Min. surface roughness of workpiece Max. workpiece hardness
Min. radius of workpiece (convex/concave)
Min. workpiece weight Min. workpiece thickness coupled
Min. thickness of hardened layers Charging time Continuous working time Power
Operating temperature
Overall dimensions
Weight
D integrated
HLD, HB, HRC, HRA, HRB, HV, HS
See table below
0.5% at 800HLD
99 data group files
No
1.6µ (Ra)
960HLD
Rmin = 50mm (with support ring Rmin = 10mm)
2~5kg on stable support
0.05~2kg with compact coupling
5mm
0.8mm
3 hours
16 hours
Rechargeable Li battery
0ºC to 40ºC
145 x 35 x 30mm
110g
TH-1100
Material HLDHRBHRAHRCHB HV HS
Steel & cast steel
300-900 38.4-99.859.1-85.820-68.4 81-654 81.1-955 32.5-99.5
Cold work tool steel 300-840
-
-
20.4-67.1 -
80-898
Stainless steel 300-80046.5-101.7
-
19.6-62.4
85-65585-802
Grey cast iron
360-650
---93-334
-
Nodular cast iron
400-660
---131-387
-
Cast aluminium alloys
200-570
23.8-34.6
--26.8-164
-
Brass 200-550
13.5-95.3
--40-173
-
Bronze 300-700
---60-290
-
Copper 200-690
---45-315
-The ranges are stipulated by the application limits of the relevant static procedure
Standard Delivery
• Main unit integrated with
impact device
• Test block with HLD value
• Charger
• Cleaning brush
• Certificate
• Manual
• Carrying case
UNIVERSAL PORTABLE TESTER
- TH-1100 SERIES
Code No
W-TH1100
Description
Universal Tester
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P170-171.indd 171
Optional Accessories
• Support rings
• UKAS certified test blocks
Partners in Precision
171
02/04/2014 09:01
TESTING
Portable Hardness Tester - TH-170 Series
Handheld dynamic metal hardness tester with integrated Impact device D.
Features
• Impact device D integrated: no cables!
(TH-170)
• Integrated impact device C featuring
low impact energy for surface hardened
components and thin walled components
(TH-172)
• Integrated impact device DL featuring
testing in confined spaces (TH-174)
• Wide measuring range
• Simple handling and low test expenditure
• Direct display of hardness scales
Rockwell HRB, HRC, Vickers HV, Brinell HB,
Shore HS, Leebs HLD (TH-170)/Leebs HLC
(TH-172)/Leebs HLDL
• High accuracy ±0.5%
• For all metallic materials (TH-170),for steel
and cast steel (TH-172/174), and cold work
tool steel (TH-172)
• Clear LCD display showing all functions and
parameters
• Conforms to ASTM A 956 and DIN 50156
• USB output to PC only
• Provides testing at any angle
TH-170
TH-172
TH-174
TECHNICAL SPECIFICATION
Material
HLDHRCHRBHRAHB HV HS
Steel & cast steel
300-900
20-68
39-100
59-86
81-654
81-955
32-100
Cold work tool steel
300-840
20-67
-
-
-
80-898
Stainless steel
300-80020-62 46-101-
85-65580-802
Grey cast iron360-650
---93-334
-
Nodular cast iron
400-660
---131-387
-
Cast aluminium alloys
200-570
-24-34
-27-164
-
Brass
200-550
-13-95
-40-173
-
Bronze
300-700
---60-290
-
Copper
----45-315
-
Material
HLD
HBHRC
HVHSHSHS
Steel & cast steel 350-96080-68320-69 80-99631-10232-10032-100
Cold work tool steel
350-900
-
20-68
100-941
-
-
-
Material
HLDLHB HRBHRCHV HS HS
Steel & cast steel
560-950
81-646
37-100
21-68
80-950
80-96
32-100
Hardness parameter HRC, HRB, HRA, HV, HB, HS, HLD or HLC or HLDL
Accuracy Within ±6HLD (TH-170), Within ±12 HLC (TH-172), Within ±12HLDL (TH-174)
Data memory 270 average data in 9 files
Output RS-232
Min. Surface Roughness of Workpiece 1.6µm (Ra) (TH-170/174), 0.4µm (Ra) (TH-172)
Impact device D (standard) integrated (TH-170), C integrated (TH-172) or DL integrated (TH-174)
Needle front section of DL-device (TH-174)
Diameter = 4.2mm, Length = 50mm
Workplace max. hardness value 900HLD (TH-170), 960HLC (TH-172), 950HLDL (TH-174)
Workplace radius (convex/concave)
Rmin = 50mm (with support ring Rmin = 10mm)
Workplace minimum weight 2kg-5kg on solid support (TH-170/174)
0.5kg-1.5kg on solid support (TH-172)
(0.05kg-2kg with couplant paste) (TH-170/174)
(0.02kg-0.5kg with couplant paste) (TH-172)
Workplace min thickness coupled
5mm (TH-170/134), 1mm (TH-172)
Workplace min. case hardened depth 0.8mm (TH-170/134), 0.2mm (TH-172)
Power AAA Batteries (x2)
Charger
9V, 200mA (1.8VA)
Operating temperature
0ºC to 40ºC
Overall dimensions
155mm x 24mm x 55mm (TH-170/172) 210mm x 24mm x 55mm (TH-174)
Dimensions DL impact device (TH-174) LxD 50mm x 4mm diameter
Weight
180g (TH-170/172) or 200g (TH-174)
PORTABLE HARDNESS TESTER
- TH-170 SERIES
Code No
W-TH170
W-TH172
W-TH174
172
Description
Universal type
Low impact force (for low weight parts)
For narrow or confined spaces
Standard Delivery
• Main unit integrated with
impact Device D, C or DL
• Test block with HLD, HLC or
HLDL value
• Cleaning brush
• Battery AAA 1.5V (2pcs)
• Certificate
• Manual
• Carrying case
• Data cable (USB)
Optional Accessories
• Support rings for convex and
concave surfaces
• UKAS certified test blocks
• Dataview software TH-170
For more information visit www.bowers.co.uk
BUK2014_P172-173.indd 172
02/04/2014 09:02
TESTING
Portable Hardness Tester - TH-110
The new TH-110, part of the unbeatable series of CV Leeb type dynamic hardness testers offers a very affordable but accurate hardness testing
solution for on-site testing in workshops and in field operations. The unit assures accurate and reliable measurement. All results and statistics
can be directly printed on the built-in printer. Any metallic products with a minimum solid mass of 2kg can be tested according to the Leeb
principle and directly converted to any common hardness scale. All test results appear immediately on the display, while you toggle between
scales and conversions.
Features
• Test results appear directly on the large display
• According to ASTM and DIN standard
• Display scales HV, HB, HRC, HRB, HS and conversion to
tensile strength
• Highly accurate readings ± 0.5% at 800 HL
• Correction for impact direction 360 degrees
• Chargeable battery pack to ensure many hours of
undisturbed testing and printing
• Direct keys for easy set up of testing parameters
• Thermal mini-printer installed on the main unit
• Ridged ABS anti-shock casing with sealed keypad
• Optional impact devices available on request
TECHNICAL SPECIFICATION
Hardness scales Tensile strength U.T.S range (steel only) Accuracy Printer Statistics
Impact device
Optional impact devices
Workpiece max. hardness value Workpiece radius (convex/concave)
Min. Workpiece weight Workpiece min. case hardened depth Power
Charger
Charger time
Operating temperature
Overall dimensions
Weight
HL, HRC, HRB, HV, HB, HS
b from 374 to 2652
Within ±0.5% at 800HL
Thermal printer showing all test results,
settings and histogram
Average value, min-max, upper-lower limits
D (standard)
DC/D+15/DL/G/C/E
900HLD
Rmin = 50mm (with support ring Rmin = 10mm)
2-5kg on stable support
0.05-2kg with compact coupling
0.8mm
Rechargeable Li battery, 6V (1pc)
6V, 500mA (1.8VA)
2.5-4 hours
0 to 40ºC
235mm x 90mm x 47mm
615gr (including impact device and printer)
PORTABLE HARDNESS TESTER TH-110
Code No
W-TH110
Description
Dynamic Hardness Tester
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P172-173.indd 173
Standard Delivery
• Main unit with impact device type D
• Printer (on top)
• Test block with HLD-value
• Charger
• Cleaning brush
• Coupling paste
• Table support for main unit
• Certificate
• Manual
• Plastic carrying case
Optional Accessories
• Special impact devices
• UKAS certified test blocks
• Support rings for convex and
concave surfaces
Partners in Precision
173
25/03/2014 16:23
TESTING
Portable Magnetic Rockwell Tester - W-INMR/01
Magnetic base hardness tester designed according to the principle of Rockwell hardness testing.
Features
Optional Accessories
• The test head can be fixed to the surface of iron and steel components by
magnetic force. Support to the test piece is not required as the 350kg+
magnetic base will hold the unit firmly in position
• Rockwell indenters
• Rockwell balls
• The testing accuracy complies to ISO 6508 or ASTM E18 and is comparable
to a Rockwell bench hardness tester
• Testing can be done regardless of the shape of the component as long as
there is a flat surface for positioning of the magnetic base
• Able to test large-size workpieces which are assembled, unable to cut or
inconvenient to move such as large-size moulds, steel plates, steel tubes, steel
structures, pressure vessels, metallic pipe lines or the slide ways of machine tools
TECHNICAL SPECIFICATION
Initial test force
Rockwell test force
Indenter
Force applying method
Maximum magnetic force
Test range
Resolution
Accuracy
Minimum specimen size
Net weight
Package gross weight
10kg
60kg, 100kg or 150kg
120º diamond cone
1.588mm carbide ball
By screw
>350kg
Rockwell hardness HRC, HRB, HRA etc.
15 scales
Rockwell hardness 0.5HR
In accordance with ISO 6508
60mm x 180mm
4.9kg
7.4kg
PORTABLE MAGNETIC ROCKWELL TESTER
Code No
W-INMR/01
Description
Rockwell Hardness Tester
Portable Brinell Hardness Tester
The HB1500 Portable Brinell Hardness Tester is designed following the Brinell hardness test method. The test force is controlled by a shear
pin. After reading the diameter of the indention with the reading microscope, the brinell hardness number can be obtained.
Features
• Solid framework
• Easy to operate
• Tolerance is controlled by a shear pin
• Three types of application: bench, C clamp and hammer impact
• Suitable for assemblies inconvenient to be taken to the
lab and not allowed to be cut
• Accuracy is much higher than any other type hammer impact tester
• Used to test the hardness of forgings, castings, steels, nonferrous metal
and its alloy products, and to test the hardness of annealed, normalizing
and tempered mechanical parts
TECHNICAL SPECIFICATION
Test force
Tolerance of test force
Accuracy
Indenter
Net weight
174
1580kg
<0.5%
In accordance with ISO 6506
Ø 7.26mm steel spherical surface indenter (range: 100-400HB)
Ø 4.0mm carbide spherical surface indenter
(Optional) (range: 400-650HB)
C clamp:
4.2kg
Hammer impact: 0.8kg
Bench:
5.1kg
PORTABLE BRINELL
HARDNESS TESTER
Code No
W-HB1500
Description
Brinell Hardness Tester
For more information visit www.bowers.co.uk
BUK2014_P174-175.indd 174
31/03/2014 10:28
TESTING
Webster Type Portable Hardness Tester
The WEBSTER Hardness Testers are portable instruments that can perform on-site hardness testing on aluminium alloys, brass, copper and
soft steel. A quick and easy test, the hardness value can be read out directly from the indicator with a simple clamp. Suitable for testing
aluminium alloy profiles, tubings and sheet materials. Especially suitable for fast, non destructive quality inspection on the production site.
Features
• One hand operation and portability
• Variety of anvils permits testing a great variance of shapes
• Simple operation permits readings independent of the operator’s skill
• Test is made by simply applying pressure to the handles until
"�bottom" is felt
• Easy-to-read dial indicator with 20 graduations permits use of the
tester as "go" and "no-go" gauge
• Standard hardness gauge tests materials up to 13mm in thickness
WEBSTER TYPE HARDNESS TESTER
TECHNICAL SPECIFICATION
Measuring Scope Accuracy Net Weight Package Gross Weight
Package Dimensions
0-20HW
0.5HW
0.5kg
1.55kg
330mm x 255mm x 150mm
Code No
W-WH100
Material
Aluminium alloy
W-WH110
Aluminium alloy
W-WH120
Aluminium alloy
W-WH130
Brass in hard/half hard state
super-hard Aluminium alloy
Brass in hard/half hard state
super-hard Aluminium alloy
Soft Brass, pure Copper
Soft Brass, pure Copper
Cold-rolled steel sheet,
stainless steel
W-WH140
W-WH150
W-WH160
W-WH170
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P174-175.indd 175
Hardness Scale
25-110HRE
58-131HV
25-110HRE
58-131HV
25-110HRE
58-131HV
63-105HRF
Thickness
Max. 6
Diameter (mm)
Min. 10
Max. 13
Min. 10
Max. 8
Min. 6
Max. 6
Min. 10
63-105HRF
Max. 8
Min. 6
18-100HRE
18-100HRE
48-100HRB
Max. 6
Max. 8
Max. 8
Min. 10
Min. 6
Min. 6
Partners in Precision
175
31/03/2014 10:28
TESTING
Ultrasonic Portable Hardness Tester ‘Ultramatic 2’
The ULTRAMATIC 2 is the next generation portable and laboratory use ultrasonic hardness tester. The instrument covers several new
advanced features that can be selected from a menu-operated full colour display.
TECHNICAL SPECIFICATION
Measuring principle
Standards
Indenter type
Measuring range
Reproducibility
Test probes available
Display
Calibration
Memory
Statistics
Interface
Power
UCI method (ultrasonic contact impedance principle)
Conforms to DIN 50159, ASTM A 1038-05 and
VDI/VDE directive 2616
Vickers diamond (angle 136o)
Vickers
HV
10-3000 (direct)
Rockwell
HRC
20-68 (conversion)
Brinell
HB
76-447 (conversion)
UTS
N/mm2
255-2180 (conversion)
HV +/- 1%, HRC +/- 0.5, HB +/- 1%
3N, 10N, 20N, 30N, 49N, 98N (30N standard)
Large backlit LCD, displays hardness HV, HRC, HB and UTS
20 preset calibrations for different materials (user definable)
1000 readings, expandable to 30,000
Mean, min, max, std dev, Go-No-Go%
Serial RS-232, RS-485 and parallel printer
Mains / rechargeable battery / shows continuous use
PORTABLE HARDNESS TESTER - HV400
Code No
W-HV400
W-HV400/08
W-HV400/10
W-HV Guide
Description
UCI Vickers Portable Tester without probe
30N Probe (standard)
49N Probe
Guide Support
Standard Delivery
Optional Accessories
• Probe with one fixed load (30N
as standard, others available)
• Probe SL type (slim nose)
• Charger 230V
• Bench Stand TH-4S
• Certificate
• Guide Support
• Manual
Call for full specification and
accessory list.
• Carrying case
• Memory for 30,000 readings
Ultrasonic Portable Hardness Tester MET-U1A
Portable hardness tester for accurate testing on metals, plastics and ceramics.
Features
• Uses UCI principle of hardness testing
• Suitable for hardness testing of metals,
plastics and ceramics
• Rockwell (HRC), Brinell (HB), Vickers (HV)
and Shore (HSD)
• Leaves almost no visible indent on the
tested article surface
176
Standard Delivery
Optional Accessories
• Main unit
• Hardness reference test blocks
• U1 ultrasonic probe
• Power unit
• Precision holding fixture
for probe
PORTABLE HARDNESS TESTER - MET-U1A
• Battery: NiMh, C size
• Battery operated grinder
Code No
W-MET-U1A
W-MET-U1A/10
• Carrying case
• Changeable headpiece to probe
• Instruments certificate
• Probe stand
Description
Ultrasonic Portable Hardness Tester
Stand for MET-U1A probe
• User and installation manual
For more information visit www.bowers.co.uk
BUK2014_P176-177.indd 176
26/03/2014 14:09
TESTING
CV Shore Durometers - Analogue / Digital
These advanced Shore Scale Durometers provide fast easy-to-read instruments ideal for testing rubber, plastic, leather and all other soft
materials. The gauges can be used in hand held mode or mounted onto a sturdy bench stand for improved accuracy and repeatability.
Features: Analogue
• Fast and easy to read
• Portable
• Hand-held operation or via optional bench stand
• Available in either Shore A or Shore D
• Supplied with a setting / reference block
• Supplied with UKAS calibration certificate
CV SHORE DUROMETERS - ANALOGUE / DIGITAL
Code No
SHA0001
SHD0002
DSAS001
DSDS001
SHA0003
Description
Analogue Shore ‘A’ Scale
Analogue Shore ‘D’ Scale
Digital ‘A’ Scale Durometer, Sylvac RS232 output
Digital ‘D’ Scale Durometer, Sylvac RS232 output
Shore ‘A/D’ Bench Stand
Features: Digital
• Testing rubber, plastic, leather and all other soft materials
• Fast and easy to read
• Large digital display, digits 6mm high
• Portable
• Use by hand or mounted on a stand
• Supplied with a reference block
• Data output for SPC
• Zero setting
• Preset - value input options
• Auto display off
• Electronic module protection to IP65, even with data output
• Can be used in conjunction with Shore bench stand
• Supplied with UKAS calibration certificate
TECHNICAL SPECIFICATION - DIGITAL
Scale
Resolution
Standards
Display Range
Pressure foot
Indentor
Tip angle
Indentor diameter
Battery
Data output Shore A
0.1
Conforms to ASTM D2240 and ISO 868
0-100
Ø 18mm
Blunt taper
35º
1.25mm
Lithium 3V, CR2032
RS-232 combined with external power supply
Shore D
0.1
Conforms to ASTM D2240 and ISO 868
0-100
Ø 18mm
Sharp point
30º
1.25mm
Lithium 3V, CR2032
RS-232 combined with
external power supply
Manufactured in accordance with specifications, ASTM D2240 and ISO 868. For all flexible
materials i.e. rubber, leather, vinyl sheets, perspex and plastics using the Shore ‘A’ and ‘D’ Scales.
The bench stand is intended for use with 1Kg. loading for Shore ‘A’ scales and 5Kg. for Shore ‘D’
scales. Using the stand ensures a greater repeatability and better accuracy.
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P176-177.indd 177
Partners in Precision
177
26/03/2014 14:09
TESTING
Surface Roughness Standards
Ideal for use in the drafting room, engineering department or small shop.
Features
• Made from solid electroformed nickel
• Markings in AA (microinches) and metric in Ra (micrometers)
• Each type of surface finish is truly and consistently reproduced
to give the operator a realistic idea of the feel, appearance
and texture of the machined component
• Conforms to S.A.E. and military specifications for visual and
tactile inspection
• Set contains 30 Specimens, each 7/8" x 3/8"
SURFACE ROUGHNESS STANDARDS
Code No
10-7524
Description
3 Specimens Flat Lapping 2, 4 and 8µ" AA
3 Specimens Reaming 16, 32 and 63µ" AA
6 Specimens Grinding 2, 4, 8, 16, 32 and 63µ" AA
6 Specimens Horizontal Milling 16, 32, 63, 125, 250 and 500µ" AA
6 Specimens Vertical Milling 16, 32, 63, 125, 250 and 500µ" AA
6 Specimens Turning 16, 32, 63, 125, 250 and 500µ" AA
Moore & Wright Surface Roughness
Tester - MTR110
The Surfmatic MTR110 is a pocket sized surface roughness measuring instrument ideally suited to rapid on-the-spot surface measurements.
Conforms to ISO Class 3.
Features
• Back-light LCD
• Dynamic Test Display: progress of cut-off length during testing
• Li-ion rechargeable batteries
• Protection slide on pick-up
• Auto-off after 90 seconds
• Pocket-size and economically priced
• Both Ra and Rz parameters in one instrument
• Features external calibration specimen
• Large measuring range suitable for most materials
• Piezo-electric pick-up stylus for external surfaces
• Includes steel test piece
• Includes charger unit
• Measurements of shafts above 40mm diameter
using the Vee groove in base
SURFACE ROUGHNESS TESTER
Code No
MTR-110UK
178
Description
Surface Roughness Tester
Please visit www.bowers.co.uk for full technical specification.
For more information visit www.bowers.co.uk
BUK2014_P178-179.indd 178
26/03/2014 14:13
TESTING
Surface Roughness Tester - R-135
Handheld surface roughness tester for external surfaces and grooves.
The R-135 is a portable, battery-powered instrument for checking surface
roughness, with the measured values displayed on a digital readout display.
The instrument can be used in laboratory, inspection area, workshop, or
wherever on-site surface roughness testing is required.
Features
• Pocket-sized and economically priced!
• External and internal finish testing with swivable tracer
• Ra and Rz parameters in one instrument and all available after each
individual test
• Standard 9V battery (not included)
• Three cut-off 0.25mm, 0.8mm and 2.5mm, adjustable to 1-3-5 times
• Pi‘zo-electric pick-up stylus for external surfaces with
diamond tip of 2 micron according to the latest ISO standards
Parallel chisel probe for gauging sharp
edges or small O.D., perpendicular for
axis of traverse
• With data output
Standard probe for most applications
0.5mm
3.8mm 7.0mm
3.8mm
7.0mm
Small bore probe, minimum inside
diameter 5.0mm, up to depth of
15.0mm
15mm
6.0mm
Transverse chisel probe for gauging
sharp edges or small O.D., aligned to
axis of traverse
TECHNICAL SPECIFICATION
Measuring ranges
Rz-- 0.2µm ~ 25.3µm (8µ"~999µ")
Display resolution
Cut-off
Display
Accuracy
Probe Type
Maximum stylus force
Stylus tip radius
Power
Battery capacity
Output
Ra-- 0.03µm ~ 6.35µm (1µ"~250µ")
7.0mm
0.01µm / 1µ"
0.25mm / 0.001", 2RC filter, select 1-3-5 times
0.8mm / 0.03", 2RC filter, select 1-3-5 times
2.5mm / 0.01", 2RC filter, select 2 times
3-digit LCD
Meets ISO and DIN standards
Piezoelectric
15.0mN / 1500mgf
Diamond, 2 micron
9V alkaline battery (not included)
Approx. 3000 measurements
RS-232 to pc or printer (only IPX-104)
CV SURFACE ROUGHNESS TESTER
Description
Surface Roughness Tester + RS-232 output
Stand for R-135
Data cable to PC or Printer
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P178-179.indd 179
4.0mm
0.5mm
3.8mm
Groove bottom probe for measuring
the bottoms of O-ring grooves, recesses
and holes up to 8.0mm depth
55mm
8.0mm
8.0mm
1.5mm
Standard Delivery
• Main unit
• Protection cover
Code No
W-R135
W-R130/3200
W-R130/4101
58.0mm
Optional
Accessories
• Roughness test plate Ra
• Tracers for special
applications
• Carrying case
• Stand for stable testing
• Manual
• Mini-printer with cable
• RS-232
• Datacable to
MS-Hyperterminal
• Certificate
Partners in Precision
179
02/04/2014 09:03
TESTING
CV Surface Roughness Tester - TR-200
The comprehensive, hand-held TR-200 represents the ideal multi-function solution for surface roughness testing. This
compact gauge has a large measuring range, easy-to-read, backlit graphical and text display and is suitable for a wide
variety of applications.
DataView PC Software
TECHNICAL SPECIFICATION
Roughness parameter
Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv, Rs, Rsm, Rsk, Rmr
Assessed profiles
Primary profile (P), Roughness profile (R)
Tp curve (material ratio Mr)
Profile recording magnification Vv: 200x - 20000x Vh: 20x, 50x, 200x
Standard
Conforms ISO / DIN / JIS / ANSI (menu selectable)
Measuring system
Metric µm, imperial µinch
Display resolution
0.001µm / 0.04 µinch
Display features
Detector stylus position indicator
Battery level indicator, Direct printing,
Direct display of parameters and profiles
Data output
RS-232 port
Measuring range
Ra, Rq : 0.0-40.0µm
Rz, Ry, Rp, Rt, R3z, : 0.02-160µm
Sm, S : 2-4000µm
Tp : 1-100% (% Ry)
Cut-off lengths
0.25mm / 0.8mm / 2.5mm
Evaluation length Ln
1-5 cut-off
Standard Delivery
• Certificate
• Main unit, Stylus TS100
• Protection nose piece
• Steel support for stand alone use
• Roughness test plate Ra
• Charger
• Carrying case
Optional Accessories
A large range of accessories are available
including TA220 printer, pickups/
extensions, measuring platform,
PC software.
W-TS-100
CV SURFACE ROUGHNESS TESTER
Code No
W-TR200
W-TA-220
W-TS-100
W-TS-110
W-TS-120
W-TSEA
W-TS-130
W-TS-131
W-TSEB
W-200/0320
W-200/0500
W-200/0510
180
Description
TR-200 Surface Roughness Tester
Printer for TR200
Tracer, standard
Tracer, narrow skid, special
Tracer, with skid, bores from 2mm
Extension arm, 50mm x 10mm
Tracer, deep grooves <3mm
Tracer, deep grooves <10mm
Extension arm, 90º, 70mm x 25mm
DataView Software - Windows XP
Granite platform TA610 without ‘L’ attachment
‘L’ attachment for TR200
W-TSEA
W-TSEB
For more information visit www.bowers.co.uk
BUK2014_P180-181.indd 180
26/03/2014 14:14
TESTING
Diavite DH8 High Precision Surface
Roughness Meter
New high precision surface roughness meter for universal use in workshops and inspection rooms. VH model for use with
probes with skids only. VHF model for use with probes with and without skids.
Features
• Automatic calibration
• Memory for 50 measurements
• 5 measuring lengths, all selectable between 0.5 and 15.0mm
• Selectable measuring speed
• Calibration for max. 8 tracers
• 8 measuring programs
• Choice of many types of tracers to solve nearly all measuring
tasks, also customer specific ones
• User friendly comprehensive multilingual menu guidance
Swiss Precision
• Tolerance indication for measuring values exceeding permissible
allowance set
• Key lock for lt, lc and R to prevent any settings being changed by
mistake during measuring procedure
• USB output for data transfer (Option: Bluetooth)
• Choice of capable software programmes DIASOFT (optional)
• Numerous accessories for many applications,
needed for working with skid less tracers
• Rechargeable battery for mobile applications
DIAVITE DH8 HIGH PRECISION SURFACE
ROUGHNESS METER
Code No
13-3053
13-3051
13-3074
13-3074HG
13-3052/A
13-3030
Description
Diavite DH8 Surface finish tester VH
Diavite DH8 Surface finish tester VHF
Stand with alu base
Stand with black granite base
Motor nose piece clamp
Extension - 100mm
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P180-181.indd 181
Partners in Precision
181
26/03/2014 14:14
TESTING
Diavite Tracers
The flexible application of a surface roughness meter can be reached using a Diavite tracer, of which there are several to
choose from. For DH-8 and COMPACT II, 17 different tracers are available, and thanks to the integrated reference flat in the
VHF traversing unit, very precise measurements are no longer a problem - even using skid-less tracers.
TRACER WITH SKID
Swiss Precision
TRACER WITH SKID CONTINUATION
Standard tracer
SH
Transversal tracer
QH
13-3022
Smallest bore: Ø 8mm
Max. measuring depth: 27mm
Included in the delivery
Slot tracer
NH
Transversal tracer
QKKH
13-3025
Max. depth of slot:
15mm and 20mm
Min. width of slot: 3mm
Concave-convex tracer
KKH
13-3058
For measuring concave and
convex work pieces having
a minimum radius of 5mm. Also irregular curves can be measured.
Use minimum cut-off and length of traverse.
Bore tracer
BH
13-3056
Smallest bore: Ø 2.5mm
Max. measuring depth: 20mm
Axis and knives tracer
AH
For measuring small axis,
knives, edges and wires.
13-3024
For measuring radially slots in bores
and tubes.
Circumference and ball tracer
UH
Minimum possible diameter Ø 8mm.
Transversal tracer
QBH
13-3027
13-3023A
For measuring radially in bores
and tubes.
Basis tracer
TH
13-3054
13-3023
For use in slots and for crank shaft.
13-3066
For measuring of deep level
flats till 140mm.
Gear tooth flanks tracer
ZH
Tracer with skid for tooth flanks up to module 2.
13-3028
SKIDLESS TRACER
Bore tracer
BZFH
Smallest bore: Ø 1.5mm
Max. measuring depth: 15mm
Gear tooth flanks: from module 0.75
Small bore tracer
BZFH-06
13-3060
Transversal tracer
WFH
For measuring slots inside
of flanks.
Smallest bore: Ø 0.8mm
Max. measuring depth: 15mm
Gear tooth flanks: from module 0.5
Slot tracer
NFH-06
13-3062R & 13-3062L
Slot tracer
NFH
Max. depth of slot: 10mm
Min. width of slot: 1.0mm
182
13-3069A
Axis and knives tracer
AFH
13-3068
Max. depth of slot: 25mm
Min. width of slot: 1.5mm
13-3067
For measuring small axis,
knives, edges and wires.
13-3063
For more information visit www.bowers.co.uk
BUK2014_P182-183.indd 182
26/03/2014 14:15
TESTING
Diavite Accessories & Applications
13-3074
13-3074HG
“Tubemaster” for
measuring the roughness
radially at the inner and
outer circumference of
tubes and cylindrical parts.
13-3077
13-3078
Measuring support with alu- or granite base plate and column
250mm or 500mm high.
Adapter for measurements
with skid less tracers on
big work pieces.
Cross table 70 x 70mm for vices.
Vices with jaws width 15mm, 25mm and 35mm.
13-3034
Various small supports.
Various metal or glass specimen.
13-3030
Device for the manual
measurement of crank shafts
(without tracer and motor unit).
To extend the tracers for deep bores
(up to 700mm), (standard 100mm).
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P182-183.indd 183
Partners in Precision
183
26/03/2014 14:15
TESTING
CV Ultrasonic Thickness Gauge - TT-100 Series
The TT series represents a range of quality, hand-held, ultrasonic gauges for accurate measurement of wall thickness of a variety of materials,
displaying results on a clear digital display. Suitable for metals, glass and plastics.
Features
• Easy to operate ultrasonic wall thickness gauge
• Standard 5 MHz transducer included, special
purpose types available
• Clear 4-Digit LCD display
• Retention of last 10 readings
TECHNICAL SPECIFICATION
Four models:
TT-100, TT-110, TT-120, TT-130
Measuring range
4.0-80.00mm with ZW5P transducer (TT-120)
Measuring range (in steel)
1.2-225.0mm with 5mHz transducer (TT-100, TT-110, TT-130)
Measuring restriction
Minimum 3mm thickness, 20mm dia
Transducer frequency
Standard 5 MHz, diameter probe 10mm
Display resolution
0.1mm (0.01mm for model TT-130)
Measuring accuracy
+/- 0.1mm (+/- 0.02mm for model TT-130)
Measuring units
mm
Sound velocity range
1000-9999m/s (5900m/s for TT-110, steel only)
Working temperature
All standard -15ºC to + 150ºC,
Model TT120 up to 3001⁄4C max
Applications:
TT-100 for metal, glass, plastics etc (Standard model)
TT-110 for steel thickness only
TT-120 for high temperature steel (Up to 300ºC)
TT-130 for metals, glass, plastics etc, 0.01mm resolution
Standard Delivery
• Transducer 5MHz
• Transducer ZW5P (TT-120)
• Integrated steel calibration plate 4.0mm
• Ultrasonic couplant
• Operation manual
• Carrying case
ULTRASONIC THICKNESS GAUGE - TT-100
Code No
W-TT100
W-TT110
W-TT120
W-TT130
184
Description
Universal / 0.1mm reading / incl. transducers (5MHz)
Steel only / 0.1mm reading / incl. transducers (5MHz)
High temp., reading 0.1mm / incl. special transducer
Universal / 0.01mm reading / incl. transducer (5MHz)
For more information visit www.bowers.co.uk
BUK2014_P184-185.indd 184
31/03/2014 10:38
TESTING
CV Ultrasonic Thickness Gauge - TT-300 Series
Handheld gauge with external transducer series for metals, glass and plastics.
Features
• Four models available
• Easy to operate ultrasonic wall thickness gauge
for metals, glass, plastics
• Display resolution menu selectable
• Automatic zero setting
• Two-point calibration possible
• LCD display with back-light
• Min. mode for minimum thickness measurement
• Mm/inch selectable
• Data output RS-232
Mode key
• Large internal memory
for 500 readings
• Including protection case,
couplant and carrying case
Memory
key
Sound
velocity
value
MODE
OFF
ON
Adjustment
keys
MEM
VEL
Display
back-light
Power keys
ENTER
Integrated
steel
calibration
plate
TECHNICAL SPECIFICATION
Measuring range
Transducer frequency
Display resolution
Measurement accuracy
Measuring units
Sound velocity range
Display
Display Min. mode
Alarm function
Calibration setting
Data output
Memory
Surface temperature
Battery indicator
Power supply
Operation time
Dimensions
Weight
1.2-225.0mm (steel) with 5Mhz transducer
5.0-80.0mm (steel-high temp (300ºC)) 5Mhz transducer
5.0-40.0mm (cast iron) 2Mhz probe
Standard 5 MHz, diameter probe 10mm
Menu selectable, low 0.1mm, high 0.01mm
0.75-9.99mm: ±0.05mm
10-99.99mm: (0.5%H+0.01)mm
100mm - 300mm: (1%H+0.1)mm
mm/inch selectable
1000-9999m/s
LCD with back-light
Display current thickness or minimum thickness (menu selectable)
Minimum / Maximum limits exceeding alarm
Automatic zero setting, two-point calibration possible
RS-232 serial port,
Baud rate selectable to printer or pc
Storage of 500 thickness readings
Standard -10ºC to +60ºC
(high temperature see TT-320)
Low battery indicator
2 pcs AA batteries 1.5V
With back-light 60 hours continuously
Without back-light 100 hours continuously
152 x 74 x 35mm
370g
Standard Delivery
• Main unit
• Integrated steel calibration plate
• Transducer 5MHz
• Transducer ZW5P (TT-320)
• Batteries AA 1.5V (2 pcs)
• Ultrasonic couplant
• Manual
• Certificate
• Carrying case
Optional Accessories
• Transducers for special applications
• TA-220 printer with cable
• Software Dataview TT-300
ULTRASONIC THICKNESS GAUGE - TT-300
Code No
W-TT300
W-TT310
W-TT320
W-TT340
Description
Universal, 0.01mm resolution, 5MHz probe (std)
Universal, 0.10mm resolution, 5MHz
High temperature version, (300ºC) 5MHz probe
Castings version, 2MHz probe
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P184-185.indd 185
Partners in Precision
185
31/03/2014 10:38
TESTING
Coating Thickness Gauge - TT-210
Features
• Easy to use
• Integrated probe FN
• Automatic substrate recognition
• Automatic calculation: Mean/Max/Min/No./S.Dev
• Upper-lower limit setting and sound alarm
• Data output RS-232 to printer TA-220S or PC
• Storage function for 500 measuring results
• Measurement modes: continuous/single
• Battery operated
TECHNICAL SPECIFICATION
Operating principle Measurement range Measuring system Minimum resolution Measuring accuracy Statistics Power supply Display Dimensions Weight Magnetic induction/eddy current
0µm to 1250µm
Selectable mm/inch
0.1µm (coating thickness <100µm)
F: ±(3%H+1µm)
N: ±(3%H+1.5µm)
H = nominal value
Average (MEAN), MAX., MIN.,
number of measurements (NO.), standard deviation (S.Dev)
Battery AAA 1.5V (2 pcs)
LCD with back-light
110mm x 50mm x 23mm
100gr
Standard Delivery
• Calibration foil set
• AAA 1.5V battery (2 pcs)
• Manual
• Certificate
• Carrying case
COATING THICKNESS GAUGE - TT-210 SERIES
Code No
W-TT210
186
Description
Handheld gauge with integrated FN probe
Optional Accessories
• Printer TA-220S with cable
For more information visit www.bowers.co.uk
BUK2014_P186-187.indd 186
26/03/2014 14:20
TESTING
Coating Thickness Gauge TT-270 Series
The measuring methods of the TT-270 are magnetic induction (F) and eddy current (N). When a F series probe is connected, the unit measures
non-magnetic coating on ferro substrates, when a N series probe is connected, the unit measures non-conductive coating on non-ferro
substrates.
Features
• Several types of probes are available for various applications: F400, F1, F1/90, F10, N1, CN02
• Measurement modes: continuous / single
• Automatic calculation: Mean values / Max. values / Min. values / No. of test, S.Dev.
• Memory for maximum 640 readings
• Working modes: direct mode (DIRECT) and Batch mode (APPL)
• With backlight display
• Integrated printer
• Battery low indication
• Switch off modes: manual and auto
TECHNICAL SPECIFICATION
Measuring range
Probes available
Tolerance
Minimum resolution
Measuring conditions
Operation language
Standards
Min. measuring area
Calibration
Statistics
Data memory
Limits
Interface
Operating temperature
Humidity Power supply
Dimensions
Weight
Refer to table below
F400, F1, F1/90, F10, N1, CN02
Refer to table below
Refer to table below
Refer to table below
English
DIN, ISO, ASTM, BS
Ø5mm (standard probe N1),
Ø7mm (standard probe F1)
Zero and foil calibration
Maximum and minimum, mean, standard deviation of
3000 readings, number of measurements
640 readings
Min-max with alarm
RS-232
-5ºC-40ºC
20%~90%
NiMH rechargeable batteries, 1.25V
230mm x 86mm x 47mm
530g
Standard Delivery
• Controller unit & integrated printer
• Probe F1 or N1
• Charger
• Substrate & calibration foil set
• Printer paper
• Manual
• Quality certificate
Optional Accessories
• Various probes for different applications
PROBE MODEL
F400
F1
F1/90º
F10 N1
CN02
Operating principle
Magnetic induction
Magnetic induction
Magnetic induction
Magnetic induction
Eddy current
Eddy current
Measuring range (µm)
0-400 0-12500-100000-12500-40
10-200 (for chrome
plate on copper)
Low range resolution (µm)
0.10.10.110 0.11
Accuracy One-point calibration (µm)
±(3%H+1)±(3%H+1)±(3%H+1)±(3%H+10) ±(3%H+1.5)
±(3%H+1)
Accuracy Two-point calibration (µm) ±[(1~3)H%+0.7]±[(1~3)H%+1] ±[(1~3)H%+1] ±[(1~3)%H+10] ±[(1~3)%H+1.5] Measuring conditions
Convex 1 1.5 Flatten
10
3
Flatten
Min curvature of the min area (mm)
Min diameter of the area (mm)
Ø 3
Ø 7
Ø 7
Ø 40
Ø 5
Ø 7
Critical thickness of substrate (mm)
0.20.50.52 0.3unlimited
COATING THICKNESS GAUGE - TT-270 SERIES
Code No
W-TT270F
W-TT270N
W-TT270FN
Description
Coating thickness gauge with integrated printer and F1 probe
Coating thickness gauge with integrated printer and N1 probe
Coating thickness gauge with integrated printer and FN probe
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P186-187.indd 187
Partners in Precision
187
26/03/2014 14:20
TESTING
Ultrasonic Thickness Gauge TT-500
The new handheld TT-500 Ultrasonic Wall Thickness Gauge offers the ability to measure the wall thickness through paint and eliminate
coatings. It assures accurate measuring of wall thickness and the extent of corrosion of all metals from the outside.
Features
• A-Scan display for waveform verification
• Wide thickness range (0.75-508mm)
• Echo-echo mode to determine the distance excluding the coating between two echoes
• Min. and Max. mode
• Two Differential modes:
- Thickness difference between actual measuring and reference value
- % difference between actual measuring and reference value
• Manual gain adjustment/auto gain selectable
• Large backlit LCD display
TECHNICAL SPECIFICATION
Measuring range 0.75mm - 508.00mm
Sound speed 1000m/s - 9999m/s
Scanning mode A scan
Gain range 20db - 70db step: 1db
Rectification Positive half wave, negative wave, full wave, and RF
Testing mode
Standard mode: testing from primary pulse to the first echo.
Testing between two echoes
Resolution
Standard: 0.01 low: 0.1
Memory
100 A scan graphs and 10000 thickness values in 100 groups
Communication
RS-232 port to PC or printer
Tolerance (steel)A) When the selected resolution is 0.01mm and the thickness is
H<10mm, the tolerance is = 0.05mm maximum
B) W
hen the resolution is 0.01mm and the thickness H>10mm,
the tolerance is = (0.5% H 0.01mm) maximum
C) When the resolution is 0.1mm the tolerance is
= (1% H 0.1mm) maximum
Pulse frequency
1KHz
Protection Class
IP54
ULTRASONIC THICKNESS GAUGE TT-500
Code No
W-TT-500
188
Description
TT-500 Coating wall thickness gauge
For more information visit www.bowers.co.uk
BUK2014_P188-189.indd 188
02/04/2014 09:05
TESTING
Multi-Functional Digital Force Gauge
With integrated load cell and external load cell.
Features
• High accuracy +/- 0.5% of full scale
• Peak hold function
• Tolerance setting
• Calculation of average values
• Lbf, kgf and Newton units
• RS232 digital output
• Clear LCD display showing all functions and parameters
• Supplied with standard accessories and software
• Optional stands available
13-03650
TECHNICAL SPECIFICATION
Measurement unit
Accuracy
Resolution
Output
Memory
Power
Battery life
Operating temperature
Dimensions
Weight of main unit
Lbf, kgf or Newtons
+/-0.5% of full scale
Depending on range, see table below
RS232
10 readings to calculate average
Rechargeable Ni-Hi batteries
20 hours of use
20ºC +/- 10ºC
225mm x 65mm x 35mm
650g
DIGITAL PUSH-PULL FORCE GAUGE
Code No
13-03611
13-03612
13-03613
13-03614
13-03615
13-03616
13-03617
13-03618
13-03650
13-03652
Description
SH-2
SH-5
SH-10
SH-20
SH-50
SH-100
SH-200
SH-500
Stand (Mechanical)
Stand (Motorised)
Maximum Scale
Newtons
2
5
10
20
50
100
200
500
13-03652
Minimum Scale
Newtons
0.001
0.001
0.005
0.01
0.01
0.05
0.1
0.1
STANDS SPECIFICATION
13-03650
Dimension
152x233x425 (LxWxH)
Weight
10.6Kg
Capacity
500N
Stroke
70mm
13-03652
Dimension
245x430x570 (LxWxH)
Weight
24.2Kg
Test speed: 50-245mm/min
Capacity: 200N
Test speed: 200-500mm/min
Capacity: 500N
Stroke
250mm
Accuracy of speed
10%
Resolution of speed
5 mm/min
Max Cycle Times
9999
Tel: 08708 50 90 50 Fax: 08708 50 90 60
BUK2014_P188-189.indd 189
Standard Delivery
• Main unit
• AC adaptor
• 5 measuring tips
• 4 M3 x 8 mounting screws
• CD-ROM with PC software
• Extension shaft
• Inspex certificate
• Instruction manual
Optional Accessories
• Various stands
• UKAS calibration certificate
• RS232 serial cable
Partners in Precision
189
02/04/2014 09:05