Whirlpool ED20ZK Specifications

.
A Note To You
2
!FZEfdW
3
Parts And Features
4
Before Using Your
Refrigerator
5
Using Your
Refrigerator
7
~$;e~i-I&our
17
Food Storage Guide 19
If You Need
gy;ez
22
24
Warranty
1-800-253-1301
Call us with questions
NO-FROST REFRIGERATOR-FREEZERS
A
MODELS
ED20PK
ED20ZK
or comments.
0 -sa
ED22ZR
A Note To You
Thank
you for
buying
a Whirlpool
appliance.
You have purchased a quality, world-class home appliance. Years of engineering experience have gone
into its manufacturing. To ensure that you will enjoy many years of trouble-free operation, we have
developed this Use and Care Guide. It is full of valuable information on how to operate and maintain
your appliance properly and safety. Please read it carefully. Also, please complete and mail the Ownership Registration Card provided with your appliance. This will help us notify you about any new information on your appliance.
Your
safety
is important
to us.
This guide contains safety symbols and statements. Please pay special attention to these symbols and
follow any instructions given. Here is a brief explanation of the use of each symbol.
This symbol will help alert you to such dangers as
personal injury, burns, fire and electrical shock.
This symbol will help you avoid actions which
could cause product damage (scratches, dents,
etc.) and damage to your personal property.
Our Consumer
is TOLL-FREE,
number,
Assistance
Center
24 hours a day.
l-800-253-1301,
If you ever have a question concerning your appliance’s operation, or if you need service, first see “If
You Need Assistance Or Service” on page 22. If you need further help, feel free to call our Consumer
Assistance Center. When calling, you will need to know your appliance’s complete model number and
serial number. You can find this information on the model and serial number label (see diagram on page
4). For your convenience, we have included a handy place below for you to record these numbers, the
purchase date from the sales slip and your dealer’s name and telephone number. Keep this book and
the sales slip together in a safe place for future reference.
Model Number
Dealer Name
Serial Number
Dealer Phone
Purchase
2
Date
Imraortant Safetv Instructions
To reduce the risk of fire, electrical shock, or injury when using your
refrigerator, follow these basic precautions:
Read all instructions before using the
refrigerator.
Child entrapment and suffocation are not
problems of the past. Junked or abandoned
refrigerators are still dangerous . . . even if
they will “just sit in the garage a few days.”
If you are getting rid of your old refrigerator,
do it safely. Please read the enclosed safety
booklet from the Association of Home
Appliance Manufacturers. Help prevent
accidents.
I
Help
l
Never allow children to operate, play with, or
crawl inside the refrigerator.
Never clean refrigerator parts with flammable
fluids. The fumes can create a fire hazard or
explosion.
l FOR YOUR SAFETY
l
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND LIQUIDS
IN THE VICINITY OF THIS OR ANY OTHER
APPLIANCE. THE FUMES CAN CREATE A
FIRE HAZARD OR EXPLOSION.
- SAVE THESE INSTRUCTIONS
us help
-
you
Please:
Install and level the refrigerator on a floor that
will hold the weight and in an area suitable for
its size and use.
l Do not install the refrigerator
near an oven,
radiator or other heat source.
l Do not use the refrigerator
in an area where the
room temperature will fall below 55°F (13°C).
l Keep the refrigerator
out of the weather.
l Connect
the refrigerator only to the proper kind
of outlet, with the correct electrical supply and
grounding. (Refer to the Electrical Requirements and Grounding Instructions Sheet.)
l Do not load the refrigerator
with food before it
has time to get properly cold.
l Use the refrigerator
only for the uses described
in this manual.
l Properly
maintain the refrigerator.
l Be sure the refrigerator
is not used by anyone
unable to operate it properly.
l
l
Also, remove tape and any inside labels (except
the model and serial number label) before using
the refrigerator.
To remove any remaining glue:
l Rub briskly with thumb to make a ball, then
remove.
OR
l Soak area with liquid hand dishwashing
detergent before removing glue as described
above. Do not use sharp instruments, rubbing
alcohol, flammable fluids or abrasive cleaners.
These can damage the material. See “lmportant Safety Instructions” above.
NOTE: Do not remove any permanent instruction
labels inside your refrigerator. Do not remove the
Tech Sheet fastened under the refrigerator at the
front.
PartsAnd
Feahms
This section contains captioned illustrations of your appliance. Use them to become familiar with where
all parts and features are located and what they look like. The model you have purchased may have all
or some of the parts and features shown and they may not match the illustration exactly. This manual is
designed to cover several models.
Control
Dane1
Liaht
Automatic ice
maker and ice
Door shelves
Model EDSOZK shown
Control
panel
Freeze;
control
Refrigerator
control
Before Using Your
Refrigerator
In This
Section
Page
Page
Cleaning
it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 5
Instelling
it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Plugging
it in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 5
Leveling
it . . .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to
a power source, install it and level it.
Cleaning
it
Clean your refrigerator before using it, if necessary. See cleaning instructions on page 17.
Plugging
it in
Recommended
Grounding Method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical supply is
required. It is recommended that a separate
circuit serving only this appliance be provided.
Use a receptacle which cannot be turned off with
a switch or pull chain. Do not use an extension
cord.
See Electrical Requirements and Grounding
Instructions Sheet in your Literature Package.
Installing
it
1. Allow lh inch (1.25 cm) space on each side
and at the top of the refrigerator for ease of
installation.
2. If the refrigerator is to be against a wall, you
might want to leave extra space on the hinge
side closest to the wall so the door can be
opened wider.
3. The refrigerator can be flush against the wall.
%-prong grounding
type wall receptacle
Refrigerator
power cord
\
I
J-prong
g~ounchg
I
plug
Leveling
it
Your refrigerator has 2 leveling screws-one on
the right and one on the left. To adjust one or
both of these, follow the directions below.
1. Remove base grille. (See page 14.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclockwise.
4. Check with level.
5. Replace base grille. (See page 14.)
6
Right to raise;
Ml to lower
Front
r0lh
Use a screwdriver
Using Your Refrigerator
In This
Section
-
Paw
Setting the controls ........................................... .7
settings.
9
..........................
Changing
the control
Adjusting
the refrigerator
Removing
the freezer
shetvcs
Removing
the freezer
door shelves
Adjusting
the shelf glides ..................................
shelves
................... .6
9
...........................
.................. 9
9
the crisper and crisper cover ...... ..lO
Removing the meat drawer and cover.. ..........10
Removing
Adjusting
the meat drawer
Removing
the freezer
temperature..
...... .10
bin.. ..............................
.ll
Paw
Using the ice cubs trays.. .............................
Using the automatic
...............................
12
Solving
the ice maker storage
common
bin .......... .13
ice maker/
.......................................
14
Removing
the base grille .............................
.14
Changing
the light bulbs ...............................
15
dispenser
problems
you may hear .. .16
Undwstanding
the sounds
Saving energy
................................................
In order to obtain the best possible results from your refrigerator,
properly. This section will tell you how to do just that.
Setting
.l 1
Using the ice dispenser..
Removing
.ll
ice maker ....................
16
it is important that you operate it
the controls
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time:
1. Set the Ref rigeretor Control to 3.
Refrigerator Control adjustments range from 1
(warmest) to 5 (coldest).
2. Set the Freezer Control to B.
Freezer Control adjustments range from A
(warmest) to C (coldest).
3. Give the refrigerator time to cool down completely before adding food. This may take
several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls will be set correctly when
milk or juice is as cold as you like and when ice
cream is firm. If you need to adjust these
settings, see “Changing the control settings” on
page 8.
NOTE: The Automatic Exterior Moisture control
continuously guards against moisture build-up on
the outside of your refrigerator cabinet. This
control does not have to be set or adjusted.
7
Changing
the control
settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 23.)
RECOMMENDED
CONTROL SETTINGS:
REASON:
If Refrigerator
Section is
TOO WARM
Door opened often
Large amount of food added
Room temperature too warm
Refrigerator
Freezer
i
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Refrigerator
Freezer
3
C
If Refrigerator
Section is
TOO COLD
Controls not set correctly
for your conditions
Refrigerator
Freezer
2
B
If ICE isn’t
MADE FAST
ENOUGH
Heavy ice usage
Very cold room temperature
(can’t cycle often enough)
Refrigerator
Freezer
3
C
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
Freezer
ii
the refrigerator
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy food
items.
remove shelves:
Remove items from shelf.
Tilt shelf up at front.
Lift shelf up at back.
Pull shelf straight out.
To replace shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slots.
3. Lower front of shelf to level position.
NOTE: The above instructions apply to all
models in this manual (ED20PK with glass
shelves and ED20ZK and ED22ZR with wire
shelves).
8
l
Adjust the Refrigerator Control first.
Wait at least 24 hours between adjustments.
Then adjust the Freezer Control if needed.
CONDITION:
Adjusting
To
1.
2.
3.
4.
l
l
shelves
Removing
the freezer
To
1.
2.
3.
remove the shelves:
Lift right side of shelf off supports.
Slide shelf out of shelf support holes.
Replace in reverse order.
To
1.
2.
3.
4.
adjust the shelves:
Remove shelf as above.
Remove supports by sliding upward.
Replace supports on desired level.
Replace shelf.
shelves
NOTE: The cup-shaped
of the freezer.
supports go in the back
Removing
the freezer
door shelves
(ED~~ZR)
Shelves can be removed for easier cleaning.
To remove door shelves:
1. Grasp shelf at both ends.
2. Lift shelf up and pull out.
To replace door shelves:
1. Insert hooks into guides on both sides of door.
2. Push shelf down to lock into place.
Adjusting
the shelf
The shelf glides can be used to secure oddshaped items or to separate other items.
1. Grasp glide.
2. Slide guide along track.
NOTE: Shetf glides cannot be removed.
glides
(EDZOPK)
Slide along
track
Removing
To
1.
2.
3.
4.
the crisper
and crisper
remove the crisper:
Slide the crisper straight out to the stop.
Lift the front.
Slide out the rest of the way.
Replace in reverse order.
cover
Pull out to the stop,
lift the front
To remove the cover:
1. Push glass insert up from bottom, then slide
out with both hands.
2. Lift front of cover frame.
3. Lift cover frame out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator, then lower front into place.
2. Slide back of glass insert into place, then
lower front into place.
Lift the covew
Removing
To
1.
2.
3.
4.
the meat drawer
and cover
remove the meat drawer:
Slide the meat drawer out to the stop.
Lift the front.
Slide meat drawer out the rest of the way.
Replace in reverse order.
To remove the cover:
1. Remove crisper, crisper cover and meat
drawer.
2. Tilt front of cover up, lift at back and pull
straight out.
3. Replace in reverse order.
Adjusting
the meat drawer
Cold air flows against the meat drawer through
an opening between the freezer and the refrigerator. This helps keep the meat drawer colder
than the rest of the refrigerator for better storage
of meats.
Slide the control to let more or less cold air
through.
10
temperature
Removing
the freezer
bin
For proper air movement, keep the freezer bin in
place when the refrigerator is operating.
To remove
the bin:
1. Slide bin out to the stop.
2. Lift bin at the front to clear the stop.
3. Slide bin out the rest of the way.
To replace the bin:
1. Place bin on the slides.
2. Make sure the stops clear the front of the
slides.
3. Slide bin in.
Using
the ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
Using
the automatic
(Factory-installed
on ED22ZR,
ice maker
optional
If you have the automatic ice maker accessory
(Part No. ECKMF80), or if you plan to add one
later, there are a few things you will want to
know:
l The ON/OFF
lever is a wire signal arm.
Down . . . to make ice automatically.
up . . . to shut off the ice maker.
NOTE: Do
connected to the water suDDlv.lostructlons
for
water supply hook up are at tached to the back of the refriaeratoc
cabinet.
l The dial or lever on the side of the ice maker
changes the size of the cubes.
l Shake the bin occasionally
to keep cubes
separated and to obtain increased storage
capacity.
l It is normal for ice crescents
to be attached by
a corner. They will break apart easily.
l You will hear water running when ice maker is
working. You’ll hear ice fall into the bin. Don’t
let these sounds bother you.
on EDZOPK
and EDZOZK)
Raise
signal
arm to
stop ice
maker.
Lower
signal
arm to
8tart ice
maker.
11
l
l
l
l
The ice maker will not operate until the freezer
is cold enough to make ice. This can take
overnight.
Because of new plumbing connections, the first
ice may be discolored or off-flavored. Discard
the first few batches of ice.
If ice is not being made fast enough and more
ice is needed, turn the Refrigerator Control
toward a higher number. Walt a day and, if
necessary, turn the Freezer Control toward C.
If you remove the ice bin, raise the signal arm
to shut off the ice maker. When you return the
bin, push it in all the way and lower the signal
arm to the ON position.
Using
the ice dispenser
Personal Injury Hazard
Tumbling ice and pressure on a fragile
glass can break it. Do not use a fragile
glass when dispensing ice.
Doing so could result in personal injury or
breakage.
Ice is dispensed from the ice maker storage bin
in the freezer. When the dispenser bar is
pressed, a trapdoor opens in a chute between
the dispenser and the ice bin. Ice is moved from
the bin and falls through the chute. When the
dispenser bar is released, a buzzing sound may
be heard for a few seconds as the trapdoor
closes.
The dispensing system will not operate when
the freezer door is open.
NOTE: Large amounts of ice should be taken
from the ice bin, not through the dispenser.
To dispense ice:
1. Press a sturdy glass against the ice dispenser bar. Hold glass close to the dispenser
opening so ice does not fall outside of glass.
2. Remove the glass to stop dispensing.
NOTE: The first few batches of ice may have an
off taste from new plumbing and parts. Throw the
ice away.
12
. If cubes are stored too long, they may develop
an off-flavor . . . like stale water. Throw them
away. Ice maker will make new ice. Cubes in
the ice bin can also become smaller by
evaporation.
l Good water quality
is important for good ice
quality. It is not recommended that the ice
maker be connected to a softened water
supply. Water softener chemicals, such as salt
from a malfunctioning softener, can damage the
ice maker mold and lead to poor ice quality. If a
softened water supply cannot be avoided, it is
important that the water softener be well
maintained and operating properly.
(~~222~)
Removing
the ice maker
storage
bin
(ED~~ZR)
Remove, empty and clean the storage bin if:
the ice dispenser has not, or will not, be used
for a week or more.
l a power failure causes
ice in the bin to melt and
freeze together.
l the ice dispenser
is not used regularly.
l
To remove ice bin:
1. Pull the covering panel out from the bottom
and slide it to the rear.
2. Lift the signal arm so it clicks into the OFF (up)
position. Ice can still be dispensed, but no
more can be made.
3. Lift the front of the storage bin and pull it out.
4. Empty the ice bin. Use hot or warm water to
melt the ice if necessary. Never use anything
sharp to break up ice in the bin. This can
damage the bin and dispenser mechanism.
5. Wash with mild detergent. Rinse well. Do not
use harsh or abrasive cleaners or solvents.
6. When replacing the bin, make sure it is
pushed in all the way. Then push the signal
arm down to the ON position to restart ice
production.
13
Solving common
problems
PROBLEM
ice maker/dispenser
CAUSE
Ice dispenser
won’t work
l
l
l
l
Ice dispenser
working
stops
l
Freezer door open
Ice bin not properly
installed
Wrong ice in bin
Dispenser not used for
extended periods,
causing ice cubes to
meft together
Ice dispenser bar held
in too long
SOLUTIONS
Close the freezer door.
. Make sure bin is pushed in all the way.
l
l
l
l
l
Off-taste
in ice
or o&r
l
l
l
Foods not properly
wrapped
Ice bin and freezer may
need cleaning
Plumbing to ice maker
l
New ice maker
l
l
Removing
Ice attracts airborne
odors; old ice
Water quality
the base grille
To remove the grille:
1. Open both doors.
2. Pull base grille forward to release the support
tabs from the metal clips.
3. Do not remove Tech Sheet fastened behind
the grille.
To
1.
2.
3.
replace the grille:
Line up grille support tabs with metal clips.
Push firmly to snap into place.
Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 18.
14
l
l
l
l
l
l
Use only crescents from ice maker.
Shake the bin occasionally to keep cubes
separated and to obtain increased storage
capacity.
Dump old ice and make a new supply.
Wait about 3 minutes for the dispenser
motor to reset.
Large amounts of ice should be taken
from the bin, not through the dispenser.
Dump old ice and make a new supply.
Store excess ice in covered container.
Water containing minerals (such as sulfur)
may require a filter to remove.
Wrap properly. See pages 20 and 21.
Clean freezer and ice bin. See cleaning
chart on page 17.
Follow Installation Instructions for proper
ice maker water supply hook up. (See
back of refrigerator cabinet.)
The first few loads of ice from a new ice
maker may have an off-taste. Dump ice
and make a new supply.
Conderyr
coilr
.
Changing
the light
bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to it at the main power supply.
Failure to do so could result in personal
injury.
To change refrigerator
light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to remove
bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change crisper light (ED22ZR):
1. Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
To
1.
2.
3.
change freezer light:
Disconnect refrigerator from power supply.
Grasp front of light shield.
Pull bottom of light shield forward until it snaps
free.
4. Replace with a 40-watt appliance bulb.
5. Press light shield straight on until it snaps into
place.
6. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace bulb with one
of the same size and shape.
15
Understanding
the sounds
Your new refrigerator may make sounds that your
old one didn’t. Because the sounds are new to
you, you might be concerned about them. Don’t
be. Most of the new sounds are normal. Hard
surfaces like the floor, walls and cabinets can
make the sounds seem louder.
The following describes the kinds of sounds
that might be new to you. and what may be
making-them.
-
Slight
hum,
soft
hiss
You may hear the refrigerator’s
moving air.
Clicking
or snapping
fan motor and
sounds
sounds
When the refrigerator stops running, you may
hear gurgling in the tubing for a few minutes after
it stops. You may also hear defrost water running
into the defrost water pan.
Ice maker
sounds
trickling water
thud (clatter of ice)
If your refrigerator has an automatic ice maker,
you may hear buzzing (from the water valve),
trickling water and the clatter of ice dumped into
the bin.
l
Running
sounds
Your refrigerator has a high-efficiency compressor and motor. It will run longer than older
designs. It may even seem to run most of the
time.
energy
You can help your refrigerator use less electricity.
l Check door gaskets
for a tight seal. Level the
cabinet to be sure of a good seal.
l Clean the condenser
coils regularly.
l Open the door as few times as possible.
Think
about what you need before you open the door.
Get everything out at one time. Keep food
organized so you won’t have to search for what
you want. Close door as soon as food is
removed.
16
Water
l
The thermostat makes a definite click when the
refrigerator stops running. It also makes a sound
when the refrigerator starts. The defrost timer will
click when the defrost cycle starts.
Saving
you may hear
Go ahead and fill up the refrigerator, but don’t
overcrowd it so air movement is blocked.
. It is a waste of electricity to set the refrigerator
and freezer to temperatures colder than they
need to be. If ice cream is firm in the freezer
and drinks are as cold as your family likes
them, that’s cold enough.
l Make sure your refrigerator
is not next to a heat
source such as a range, water heater, furnace,
radiator or in direct sunlight.
l
Caring For Your Refrigerator
In This
Section
Page
Cleaning your refrigerator ............................... 17
Paw
Power interruptions
....................................... 19
Vacation and moving care .......... ..................... 19
Your refrigerator is built to give you many years of dependable service. However, there are a few things
you can do to help extend its product life. This section will tell you how to clean your refrigerator and
what to do when going on vacation, moving or during a power outage.
Cleaning
your
refrigerator
Both the refrigerator and freezer sections defrost
automatically. But both should be cleaned about
once a month to help prevent odors from building
up. Spills should be wiped up right away.
To clean your refrigerator, turn the Refrigerator
Control to OFF, unplug it, take out all removable
parts and clean the refrigerator according to the
following directions.
Personal Injury Hazard
Refrigeration system tubes are located near
the defrost pan and can become hot. Remove
and install defrost pan carefully.
Failure to do so could result in personal injury.
PART
WHAT TO USE
Removable parts
(shelves, crisper, etc.)
Sponge or cloth with mild
detergent and warm water
Outside
Sponge, cloth or paper towel
with mild detergent, warm
water and an appliance wax
(or good auto paste wax)
Inside walls
(freezer should be
allowed to warm up
so cloth won’t stick)
Sponge, soft cloth or paper
towel with baking soda or
mild detergent and warm
water
HOW TO CLEAN
l
l
l
l
l
l
Door liners and
gaskets
Plastic parts
(covers and panels)
Sponge, soft cloth or paper
towel with mild detergent
and warm water
Soft, clean sponge or soft,
clean cloth with mild
detergent and warm water
Hand wash, rinse and dry thoroughly.
Wash outside of cabinet. Do not use
abrasive or harsh cleaners.
Rinse and dry thoroughly.
Wax painted metal surfaces at least
twice a year. Apply wax with a clean,
soft cloth. Waxing painted metal
surfaces provides rust protection.
Do not wax plastic parts.
Wash with mixture of warm water and
- mild detergent, or
-baking soda (2 tablespoons [26 g]
to 1 quart [.95 L] of water).
Rinse and dry thoroughly.
Wash, rinse and dry thoroughly.
DO NOT USE cleaning waxes,
concentrated
detergents,
bleaches
cleaners containing
petroleum on
plastic parts.
l
or
Wash, rinse and dry thoroughly.
DO NOT USE paper towels, window
sprays, scouring cleansers or
flammable fluids. These can scratch
or damage material. See “Important
Safety Instructions”
on page 3.
l
continued
on next page
,7
PART
Defrost
pan
WHAT TO USE
HOW TO CLEAN
Sponge or cloth with
mild detergentand
warm water
l
l
l
l
l
l
Condenser
coils
Vacuum cleaner with
extended narrow
attachment
l
l
l
Floor under
refrigerator
Floor cleaners
l
l
l
l
Vacation
Long
and moving
base grille.
coils when dusty or dirty. Coils may
be cleaned as often as every other
base grille.
Roll refrigerator out away from the wall.
Clean floor.
Roll refrigerator back into place.
Check to see if the refrigerator is level.
Short
Remove all the food if you are going for a month
or more. If your refrigerator is equipped with an
automatic ice maker, turn off the water supply to
the ice maker at least once day ahead. When the
last load of ice drops, turn off the ice maker.
Make sure all ice is dispensed out of mechanism.
Unplug the refrigerator. Clean it, rinse well and
dry. Tape rubber or wood blocks to the tops of
both doors to prop them open far enough for air
to get in. This will keep odor and mold from
building up.
Personal Injury Hazard
Do not allow children to climb on, play near
or climb inside the refrigerator when the
doors are blocked open.
They may become injured or trapped.
16
Remove
Vacuum
need to
month.
Replace
care
vacations
To restart refrigerator,
tor” on page 7.
Remove base grille. (See page 14.)
To remove defrost pan, lift pan over wire brace
(remove tape; if any).
Wash, rinse and dry thoroughly.
Replace with notched corner to the rear. Push it
in all the way.
Make sure defrost pan drain tube is pointing
into pan.
Replace base grille.
No need to shut off the refrigerator is you will be
away for less than four weeks. Use up perishables; freeze other items. If you have an automatic ice maker:
1. Turn off your ice maker by raising signal arm.
2. Shut off the water supply to the ice maker.
3. Empty the ice bin.
Moving
If your refrigerator is equipped with an automatic
ice maker, shut off the ice maker water supply at
least a day ahead. Disconnect the water line.
After the last load of ice drops, lift the signal arm
to turn off the ice maker.
Remove all food. Pack frozen food in dry ice.
Unplug the refrigerator and clean it thoroughly.
Take out all removable parts. Wrap all parts
well and tape them together so they don’t shift
and rattle. Screw in the leveling legs; tape the
doors shut; and tape the electric cord to the
cabinet.
When you get to your new home, put everything back and refer to page 5. Also, if you have
an automatic ice maker, remember to reconnect
the water supply line.
1
see “Using Your Refrigera-
vacations
Power
interruptions
If electricity goes off, call the power company.
Ask how long power will be off.
1. If service is to be interrupted 24 hours or less,
keep both doors closed. This will help foods
stay frozen.
2. If service is to be interrupted longer than
24 hours:
(a) Remove all frozen food and store in a
frozen food locker.
OR
(b) Place 2 Ibs. (0.9 kg) of dry ice in freezer for
every cubic foot of freezer space. This will
keep food frozen for 2 to 4 days. Wear
gloves to protect your hands from dry ice
burns.
OR
(c) If neither a food locker or dry ice is available, use or can perishable food at once.
3. A full freezer will stay cold longer than a partly
filled one. A freezer full of meat will stay cold
longer than a freezer full of baked goods. If
food contains ice crystals, it may be safely
refrozen, although the quality and flavor may
be affected. If the condition of the food is poor
or if you feel it is unsafe, dispose of it.
Questions
1
Call our Consumer Assistance
number, l-900-253-1 301.
Center telephone
Food Storage Guide
In This
Storing
Section
Pa*
Paw
fresh food . . . . . . . . . . .. .. . . . . . . . . .. . . .. . . .. . . . . . . . . . . . . 19
Storing
There is a correct way to package and store refrigerated
take the time to study these recommended steps.
Storing
fresh
food ..,.....................................
20
or frozen food. To keep food fresher, longer,
food
Food placed in the refrigerator should be
wrapped or stored in air and moisture proof
material. This prevents food odor and taste
transfer throughout the refrigerator. For dated
products, check code date to ensure freshness.
Leafy
frozen
vegetables
Remove store wrapping and trim or tear off
bruised and discolored areas. Wash in cold water
and drain. Place in plastic bag or plastic container and store in crisper.
Vegetables
with skins
(carrots,
peppers)
Fruit
Wash, let dry and store in refrigerator in plastic
bags or crisper. Do not wash or hull berries until
they are ready to use. Sort and keep berries in
their store container in a crisper, or store in a
loosely closed paper bag on a refrigerator shelf.
E99s
Store without washing in the original carton on
interior shelf.
Milk
Wipe milk cartons. For best storage, place milk
on interior shetf.
Store in crisper, plastic bags or plastic container.
19
Butter
or margarine
Keep opened butter in covered dish or closed
compartment. When storing an extra supply,
wrap in freezer packaging and freeze.
TYPE
APPROXIMATE
(DAYS)
Chicken
1 to2
Leftovers
Cold cuts
3 to 5
Cover leftovers with plastic wrap or aluminum foil.
Plastic containers with tight lids can also be used.
Variety meats
1 to2
TIME
Cheese
Store in the original wrapping until you are ready
to use it. Once opened, rewrap tightly in plastic
wrap or aluminum foil.
Meat
Most meat can be stored in original wrapping as
long as it is air and moisture proof. Rewrap if
necessary. See the following chart for storage
times.
Storing
frozen
Packaging
The secret of successful freezing is in the
packaging. The way you close and seal the
package must not allow air or moisture in or out.
Packaging done in any other way could cause
food odor and taste transfer throughout the
refrigerator and drying of frozen food.
Packaging recommended
for use:
Rigid plastic containers with tight-fitting lids
l Straight-sided
canning/freezing jars
l Heavy-duty
aluminum foil
l Plastic-coated
paper
l Non-permeable
plastic wraps (made from a
Saran film)
Follow package or container instructions for
proper freezing methods.
20
NOTE: Fresh fish and shellfish should be used
the same day as purchased.
food
The freezer section is designed for storage of
commercially frozen food and for freezing food at
home. For further information about preparing
food for freezing, contact your local Cooperative
Extension Service or check a freezer guide or
cookbook
l
‘If meat is to be stored longer than the times
given, follow the directions for freezing.
Do not use:
Bread wrappers
l Non-polyethylene
plastic containers
l Containers
without tight lids
l Waxed paper
l Waxedcoated
freezer wrap
l Thin, semi-permeable
wrap
The use of these wrappings could cause food
odor, taste transfer and drying of frozen food.
l
Freezing
Do not expect your freezer to quick-freeze any
large quantity of food. Put no more unfrozen food
into the freezer than will freeze within 24 hours.
(No more than 2 to 3 pounds of food per cubic
foot of freezer space.) Leave enough space for
air to circulate around packages. Be careful to
leave enough room at the front so the door can
close tightly.
Freezer
food
storage
chart
FOOD
Storage times will vary according to the quality of
the food, the type of packaging or wrap used (air
and moisture proof) and the storage temperature
which should be 0°F (-17.8%).
STORAGE
FOOD
TIME
Fruits
l
Citrus
l
Commercially frozen
l
Juice concentrates
l
Others
12 months
8 to 12 months
Vegetables
l
Commercially
l
Home frozen
8 months
8 to 12 months
frozen
Meats
l
Bacon*
l
Corned beef’
l
Frankfurters
l
Ground beef, veal and
lamb
l
Roasts:
-Beef
-Lamb 8 veal
-Pork
l Sausage
(fresh)
l Steaks & chops:
-Beef
-Lamb, veal 8 pork
Fish
l
Alaskan king crab
l
Blue fish & salmon
l
Breaded fish
(purchased)
. Clams, oysters,
cooked fish, crab 8
scallops
l
Cod, flounder, sole 8
haddock
l
Mackerel 8 perch
l
Shrimp (uncooked)
Pouttry
l
Chicken or turkey
(whole or parts)
l
Cooked (w/ gravy)
l
Duck
l
Giblets
l
Slices (no gravy)
4 to 6 months
12 months
4 weeks or less
4 weeks or less
1 month
2 to 3 months
6 to 12
6 to 9
4 to 8
1 to 2
months
months
months
months
8 to 12 months
3 to 4 months
10 months
2 to 3 months
3 months
3 to 4 months
6 months
2 to 3 months
12 months
12
6
6
2 to 3
months
months
months
months
1 month
Main dishes
l
Casseroles (meat,
poultry 8 fish)
l
Stews
l
TV dinners
Dairy products
l
Butter
l
Margarine
l
Cheese:”
-Camembert,
Farmer’s 8
Mozzarella
-Creamed cottage
-Cheddar, Edam,
Gouda, Swiss,
Brick, etc.
l
Ice cream, ice milk 8
sherbet
Eggs
l
Whole (mixed)
l
Whites
l
Yolks
STORAGE
TIME
2 to 3 months
2 to 3 months
3 to 6 months
6 to 9 months
12 months
3 months
do not freeze
6 to 8 weeks
2 months
12 months
12 months
12 months
NOTE: Add sugar or satt to yolks or whole
mixed eggs.
Baked goods
l
Brown ‘N Serve rolls
(baked)
l
Cakes (frosted)
l
Cakes (unfrosted)
l
Cookies (baked)
l
Cookie dough
l
Fruit cakes
l
Pies (baked)
l
Pies dough
l
Quick breads
l
Unbaked breads
l
Yeast breads 8 rolls
3
8 to 12
2 to 4
8 to 12
3
12
1 to 2
4 to 6
2 to 3
months
months
months
months
months
months
months
months
months
1 month
3 months
‘Salting meat shortens freezer life.
**Freezing can change texture of cheese.
Based on U.S.D.A. and Michigan Cooperative
Extension Service suggested storage times.
21
If You Need Assistance
sewice
Or
This section is designed to help you save the cost of a service call. Part 1 of this section outlines
possible problems, their causes, and actions you can take to solve each problem. Parts 2 and 3 tell YOU
what to do if you still need assistance or service. When calling our Consumer Assistance Center for help
or calling for service, please provide a detailed description of the problem, your appliance’s complete
model and serial numbers and the purchase date. (See page 2.) This information will help us respond
properly to your request.
1. Before
calling
for assistance
...
Performance problems often result from little things you can find and fix without tools of any kind. Please
check the chart below for problems you can fix. It could save you the cost of a service call.
CAUSE
SOLUTION
PROBLEM
POSSIBLE
Your refrigerator
will not operate
The power supply cord is not
plugged into a live circuit with
proper voltage.
A household fuse has blown or
circuit breaker tripped.
The Refrigerator Control is not
set correctly.
Firmly plug power cord into a live circuit
with proper voltage. (See page 5.)
Unfamiliar
sounds or a
rattling/jingling
noise
There is something on top of or
behind the refrigerator.
The sounds are normal.
Remove item from on top of or behind
the refrigerator.
New features on your new refrigerator
make new sounds. (See “Understanding
the sounds you may hear” on page 16.)
There is water in
the defrost pan
This is normal in hot, muggy
weather. The pan may even be
half full.
Make sure the refrigerator
pan does not overflow.
The lights do not
work
A household fuse has blown or
circuit breaker tripped.
The power supply cord is not
plugged into a live circuit with
proper voltage.
The bulb is burned out.
Replace household fuse or reset circuit
breaker.
Firmly plug power cord into a live circuit
with proper voltage. (See page 5.)
The ‘ce maker
will not operate
The freezer has not had enough
time to get cold.
The signal arm is in the OFF
(up) position.
The water valve is turned off.
Water is not getting to the ice
maker.
Allow the freezer time to get cold-this
could take overnight.
Push signal arm down to the ON
position. (See page 11.)
Turn the water valve on.
Check the water line for clogs or leaks.
The motor
seems to run too
much
The condenser coils are dirty.
It is hot outside or in the room.
Clean the coils. (See page 18.)
On hot days, or if the room is too warm,
the motor naturally runs longer.
Open the door as few times as possible.
The door has been opened
frequently.
A large amount of food has
been put in at one time.
Replace household fuse or reset circuit
breaker.
Set Refrigerator Control to a numbered
setting. (See page 7.)
is level so the
Replace bulb. (See page 15.)
The motor will run longer in order to cool
down the interior when food is added.
Remember:
Motor running time depends on different things:
number of door openings, amount of food stored,
temperature of the room, setting of controls, etc.
Your new refrigerator may be larger than your
old one so it has more space to be cooled. It also
has a regular freezer instead of a frozen food
compartment. All this means better refrigeration
and may require more running time than your old
one.
2. If you need
assistance
...
Call Whirlpool Consumer Assistance
Center
telephone number. Dial free from anywhere in
the U.S.:
1-800-253-l 301
and talk with one of our trained consultants. The
consultant can instruct you in how to obtain
satisfactory operation from your appliance or, if
service is necessary, recommend a qualified
service company in your area.
If you prefer, write to:
Mr. William Clark
Consumer Assistance Representative
Whirlpool Corporation
2000 M-63
Benton Harbor, Ml 49022
Please include a daytime phone number in your
correspondence.
3. If you need
service
4. If you need FSP
ment parts . . .
replace-
FSP is a registered trademark of Whirlpool
Corporation for quality parts. Look for this symbol
of quality whenever you need a replacement part
for your Whirlpool appliance. FSP replacement
parts will fit right and work right, because they
are made to the same exacting specifications
used to build every new Whirlpool appliance.
To locate FSP replacement parts in your area,
refer to Step 3 above or call the Whirlpool
Consumer Assistance Center number in Step 2.
5. If you are not satisfied
how the problem
was
solved . . .
l
l
l
with
Contact the Major Appliance Consumer Action
Panel (MACAP). MACAP is a group of independent consumer experts that voices consumer
views at the highest levels of the major appliance industry.
Contact MACAP only when the dealer, authorized servicer and Whirlpool have failed to
resolve your problem.
Major Appliance Consumer Action Panel
20 North Wacker Drive
Chicago, IL 60606
MACAP will in turn inform us of your action.
...
Whirlpool has a nationwide
network of authorized
01
Whirlpoolsu service compaSEmrrcE nies. Whirlpool service
9
technicians are trained to
fulfill the product warranty and provide afterwarranty service, anywhere in the United States.
To locate the authorized Whirlpool service
company in your area, call our Consumer
Assistance Center telephone number (see
Step 2) or look in your telephone directory Yellow
Pages under:
-.
y
*APPLIANCE-HOUSEHOLDMAJOR, SERWCE 6 REPAIR
- sL9m whlrlpml
Appllancss
or
Authorized
Whirlpool Service
(Ex.smpb. xx! SeNlcS CO.)
-WASHING
MACHINES
A
DRYERS, SERVICE 6 REPAIR
. Sem Whirlpool AppHancw
or
Authorized Whirlpool Service
(Emmp*rxYZ
service Co.)
23
wHlRLPooL@
Refrigerator Warranty
LENGTH OF WARRANTY
WHIRLPOOL
FULL ONE-YEAR WARRANTY
From Date of Purchase
FSPQ replacement parts and repair labor to correct defects in
materials or workmanship. Service must be provided by an
authorized Whirlpoolsu service company.
FULL FIVE-YEAR
WARRANTY
From Date of Purchase
FSP replacement parts and repair labor to correct defects in
materials or workmanship in the sealed refrigeration system.
These parts are:
1. Compressor
2. Evaporator
3. Condenser
4. Drier
5. Connecting tubing
Sewice must be provided by an authorized WhirlpooP” service
company.
WHIRLPOOL
WlLL PAY FOR
WILL NOT PAY FOR
A Service calls to:
1. Correct the installation of the refrigerator.
2. Instruct you how to use the refrigerator.
3. Replace house fuses or correct house wiring or plumbing.
4. Replace light bulbs.
B. Repairs when refrigerator is used in other than normal, single-family household use.
C. Pickup and delivery. This product is designed to be repaired in the home.
D. Damage to refrigerator caused by accident, misuse, fire, flood, acts of God or use of products not
approved by Whirlpool.
E. Any food loss due to product failure.
F. Repairs to parts or systems caused by unauthorized modifications made to the appliance.
S-02
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages,
so this limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
Outside the United States, a different warranty may apply. For details, please contact your
authorized Whirlpool distributor or military exchange.
If you need service, first see the “Assistance or Service” section of this book. After checking
“Assistance or Service,” additional help can be found by calling our Consumer Assistance Center
telephone number, l-800-253-1301,
from anywhere in the U.S.
PART NO. 2155745 Rev. A
0 1882 Whirlpool
Corporation
@ Regislered
Trademark/
SM Sewice
Mark of Whirlpool
Corporation
Ptinkd
In UsA