Corsair Obsidian Series™ 800D Full-Tower Case Owner's Manual
Add to my manualsadvertisement
Corsair Obsidian
Series 800D
User Manual
Corsair Obsidian Series 800D
High Performance Computer Chassis
Obsidian Series 800D USER MANUAL
Congratulations on the purchase of your new Corsair Obsidian Series
800D high-performance PC chassis. The Obsidian 800D has been designed to offer high-end features and performance, such as an innovative cooling design and support for liquid cooling systems. We hope it serves you well in your quest to build your ultimate Dream PC!
CONTENTS OF USER MANUAL
Contents
2
Obsidian Series 800D USER MANUAL
3
Obsidian Series 800D
1.0. Product Overview
1.1. Specifications
Dimensions
Material
Color
Model
Drive Bays
Cooling
Expansion Slots
Motherboard
Front I/O
Power Supply
USER MANUAL
24" (H) x 24" (L) x 9" (W) - (609mm x
609mm x 229mm)
Aluminum Faceplate, Steel Structure
Black
800D
(x5) 5.25"
(x4) 3.5" SATA Hot Swappable
(x2) 3.5" Internal
(x3) 140mm Fans
Up to 4x 120mm Fans (not included)
7 (+1 vent)
ATX, mATX, EATX
(x4) USB 2.0
(x1) IEEE1394
(x1) Headphone, (x1) MIC
ATX (not included)
4
Obsidian Series 800D
1.2. Parts List
USER MANUAL
1
– Side Panels
2 – 140mm rear fan
3 – 3 x 120mm top fan vents
4
– CPU backplate cover
5
– Small rubber grommet
6 – Large rubber grommet
7
– PSU bay shield
8 – 5.25” Bay Covers
9
– HDD Drive Dock Door
10 – Front Bezel
11 – Lower HDD bay cover
12
– Lower HDD bay rails
13
– 140mm intake fan
14 – Case feet
15
– HDD Drive Dock trays
16 – Tool-free mechanism
5
17
– Lower HDD bay shield
18 – HDD Drive Dock Fan Shroud
19 – 140mm HDD fan
20
– HDD SATA Backplane Shield
21
– Front I/O ports
22 – Front I/O port cover
Obsidian Series 800D
1.3. Accessories Included
Image Part Name
Copper Stand Off
(color black)
Qty
16
USER MANUAL
Used for
M/B Tray
Hard Drive and Motherboard
Screws
(color black)
36
Motherboard, Hard
Drives
Case Fan Screws
(color black)
14 For top mount fans
Lower Hard Drive Bay Fan Screws
(color black)
6
For lower HDD bay fan
Drive Rails
(color black)
Rubber Vibration Damper for
120mm fan
(color black)
SATA power connector adapter
(color black)
Nylon zip ties
(color black)
SATA data cables
(color black)
8-pin CPU power connector extension cable
4
Lower HDD bay drive install
1
Lower HDD bay fan
1
8
SATA backplane power
Cable management
4
1
SATA backplane data
Extends CPU power connector on PSUs with shorter power leads
6
Obsidian Series 800D USER MANUAL
2.0. Operation
2.1. How to remove and re-install side panels
2.1.1. Removing the side panel
Press and hold the release button on the rear of the case for the corresponding side panel.
Gently pull the side panel away from case and then lift vertically to remove the panel.
PULL TOWARDS YOU
THEN LIFT
2.1.2. Re-installing the side panel
Step 1 – Slide the side panel back into the case, making sure to catch the three grooved latches at the locations indicated above.
7
Obsidian Series 800D USER MANUAL
Step 2 - Once the panel is securely latched to the bottom of the case, tilt the side panel back up into the case while holding the corresponding release button. When the side panel is flush, release the button and the side panel will lock into place.
2.2. How to remove and re-install the front panel
2.2.1. Removing the front panel
Standing in front of the case, reach under the bottom of the front panel and, using firm pressure, pull upwards and forwards. The front panel is not held in place with any screws or wires, but must be removed in order to access the lower drive bay or remove 5.25” bay covers
Grasp here. Pull firmly but carefully .
8
Obsidian Series 800D USER MANUAL
2.2.2. Re-installing the front panel
Once you are ready to re-install the front panel, line up the mounting pegs with the holes, as indicated in the above image. Press the front panel firmly on the locations indicated until it latches.
2.3. How to install a hard drive into the hot-swap drive dock
2.3.1. Attaching cables to the SATA backplane
Step 1 – Remove the cover of the SATA backplane as shown.
9
Obsidian Series 800D
Step 2 – Connect the included power cable to the SATA backplane.
USER MANUAL
Step 3 – Connect the included SATA data cables to the SATA backplane.
10
Obsidian Series 800D
Step 4 – Re-attach cover.
USER MANUAL
2.3.2. Installing a SATA drive
Step 1 – Open the door
Gently press on the side of the front door and it will pop open.
11
Obsidian Series 800D USER MANUAL
Step 2 – Remove the drive carrier
Press the release switch and pull the drive carrier out of the drive bay using the pull tab.
Step 3 – Install the SATA hard drive into the drive carrier
Use the four provided screws (two per side).
12
Obsidian Series 800D USER MANUAL
Step 4 – Re-install the drive carrier into the drive bay.
Gently slide the drive carrier back into the drive bay, leaving the pull handle open. Once the carrier is secure in the bay, close the handle until it latches shut.
2.3.3. Reversing the front door (optional)
Step 1 – Open front door and press in carefully on the two latches highlighted above.
13
Obsidian Series 800D USER MANUAL
Step 2 – Relocate the door as seen here, holding both latches until lined up with the appropriate holes.
2.4. How to install a hard drive into the lower 3.5” drive bays
Step 1 - With the front panel of the case removed (see 2.2.1), simultaneously press the top and bottom tabs of the lower hard drive bay cover plate.
14
Obsidian Series 800D
Step 2 - Use the included drive rails, one per side, as pictured above.
USER MANUAL
Step 3 - Once the drive rails are installed on the drive, slide it into the bay until it clicks in place and is secure.
Step 4 - Re-attach the drive bay cover plate as shown.
15
Obsidian Series 800D USER MANUAL
2.5. How to use the CPU heatsink backplate door
Step 1 – Gently press on the tab and pull the CPU heatsink backplate door downwards.
Step 2 – Once you have successfully installed your heatsink, simply lift the door up and press until it latches shut.
16
Obsidian Series 800D
2.6. How to install an optical drive
Step 1 – Remove the front panel from the case (see 2.2.1).
USER MANUAL
Step 2 – Decide which bay you will use and remove the corresponding front drive bay cover from the front panel.
Step 3 – Slide your optical drive into the appropriate bay.
17
Obsidian Series 800D USER MANUAL
Step 4 – When the screw hole lines up as shown below, push the latch forward until it locks, then re-install the case front panel as in 2.2.2.
2.7. How to install the motherboard
Step 1 – Determine what type of motherboard you have and install the black colored copper standoffs appropriately. (NOTE: standoffs may be pre-installed for some common board layouts)
18
Obsidian Series 800D USER MANUAL
Step 2 – Place the I/O plate in the rear of the case. (This is provided by the motherboard manufacturer).
Step 3 – Line up the motherboard with the I/O shield and the mounting holes, and use the screws provided to secure the motherboard into the case.
19
Obsidian Series 800D USER MANUAL
2.8. How to install the power supply
Place the power supply in the bottom power supply bay and install the screws as shown.
2.9. How to remove or add case fans
2.9.1. 140mm HDD Bay fan
Step 1 - Remove the plastic cover from the side of the hot-swap drive bay.
20
Obsidian Series 800D USER MANUAL
Step 2 - You now have access to the four screws that hold the 140mm fan in place.
Remove these screws to remove or replace this fan.
Step 3 – Replace the hot-swap drive bay fan cover.
21
Obsidian Series 800D USER MANUAL
2.9.2. 120mm lower HDD Bay fan
See instructions above for 140mm fan installation for hot-swap drive bay. Use the included screws and rubber fan grommet to install a 120mm fan in the space provided (see below).
2.9.3. Top case exhaust fans
Use the provided case fan screws to screw the fans into the top of the case.
2.9.4. Rear case fan
Remove screws from rear of case as shown above.
22
Obsidian Series 800D USER MANUAL
2.9.5. Bottom intake fan – Remove screws from case separator, as shown.
2.10. How to remove the dust filter for maintenance
Remove the dust filter – pull the tab from the bottom rear of the case to remove dust filter. Clean using a clean, damp cloth or canned air. Once the filter is dry, replace it by sliding it back in between the rails.
23
Obsidian Series 800D
2.11. How to install add-in cards
Step 1 – Remove the corresponding thumbscrew from the slot cover.
USER MANUAL
Step 2 – Remove the slot bracket cover.
Step 3 – Install the card, and secure with thumbscrew from step 2.
24
Obsidian Series 800D USER MANUAL
2.12. How to connect the front panel connectors
2.12.1. Audio, USB, 1394A, etc.
Connectors are indicated with the pin-outs as shown.
2.12.2. Power, Reset, HDD LED, PWR LED
Pin 1 is indicated by a small arrow on the connector. For more information, see your motherboard manual.
25
Obsidian Series 800D USER MANUAL
3.0. Support and Warranty Info
3.1. Contacting Technical Support
Corsair Technical support can be reached by using any of the methods listed below.
Online: http://www.corsair.com/helpdesk
Forum: http://www.asktheramguy.com
Phone: 1 (888) 222-4346
3.2. Warranty Information
Limited Warranty And Limitation of Liability
The Product is guaranteed for twenty four (24) months from the date of delivery to the end-user against defects in materials or workmanship. During this period, the Product will be repaired or have parts replaced, at our discretion, provided that: (I) the Product is returned to the agent from whom it was purchased with shipping prepaid; (II) the Product has been purchased by the end-user and not used for hire purposes; (III) the Product has not been misused, handled carelessly, or other than in accordance with any instructions provided with respect to its use; (IV) the Product has not been damaged due to acts of nature, such as lighting, fire, flood, or earthquake; (V) any and all warranty stickers have not been removed or tampered with.
Corsair Memory’s warranty on the Product is to the first end user or consumer only, in accordance with the Corsair Memory’s Limited Warranty. All warranties, express or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose, shall be limited to the duration of the guarantee above. The repair, replacement, or refund as provided under this express limited warranty is the exclusive remedy of the consumer, and is provided in lieu of all other warranties, express or implied. In no event shall
Corsair Memory be liable, whether in contract or tort (including negligence) for damages in excess of the purchase price of the product, or accessory, or for any indirect, incidental, special or consequential damages of any kind, or loss of revenue or profits, loss of business, loss of information or data, software or
26
Obsidian Series 800D USER MANUAL applications or other financial loss arising out of or in connection with the ability or inability to use the products or accessories to the full extent these damages
may be disclaimed by law.
Corsair Memory’s total liability, whether for breach of contract, warranty, tort
(including negligence), indemnification or otherwise, is limited to the price of the Product sold under these terms with respect to which losses or damages are claimed. In no event will Corsair Memory be liable for any loss of use, loss of time, inconvenience, commercial loss, lost profits or savings or other indirect, incidental, special or consequential damages to the full extent that may be disclaimed by law. The limitations, exclusions and disclaimers in these terms shall survive a fundamental breach or breach or the failure of the essential purpose of these terms or of any remedy contained herein. No action will be brought for any breach of these terms more than one year after the accrual of such cause of action. For the purpose of this paragraph, "Corsair Memory" includes its affiliates and its and their respective directors, officers, employees
and agents, each of whom shall be considered as a trust beneficiary.
27
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement