advertisement
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff at our full-service, in-house repair center
Instra
View
SM
REMOTE INSPECTION
Remotely inspect equipment before purchasing with our interactive website at
www.instraview.com
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
LOOKING FOR MORE INFORMATION?
Visit us on the web at
www.artisantg.com
for more information on price quotations, drivers, technical specifications, manuals, and documentation
Contact us:
(888) 88-SOURCE | [email protected] | www.artisantg.com
Trim to 5.5 x 9 inches.
Quick Reference Guide
Front-Panel Menu Reference (SCPI Mode)
• Turn the knob to select an item at the current menu level.
• Press
Enter
• Press the to move to the next level in the menu.
same
menu key again to return to the previous menu level.
View MENU
View
ERROR
á
SCAN LIST
á
RELAY CYCLES
S.List MENU
S.List
ADD TO SCAN
á
CONFIG SCAN
á
DELAY TIME
SELECT ARM Source SET ALL
á
SET CH
COUNT: nnnnn nnnnn.nnn SECS SELECT CH
TRIG Source nnnnn.nnn SECS
Mode MENU
A. Select a Slot
Mode
If MUX Installed : If DIO Installed :
CONFIG MUX CONFIG DIO
FUNCTION MODE
CONT POL POS
á
CONT POL NEG
FLAG POL POS
á
FLAG POL NEG
I/O POL POS
á
I/O POL NEG
B. Select a DIO Port
DATA POLARITY
á
DISP FORMAT
DECIMAL
á
BINARY
POS POLARITY
á
NEG POLARITY
Menu MENU
Menu
CARD PAIR
á
CONF EXT TRIG
á
INTERFACE
á
SELFTEST
á
SYST MODE
á
REV INFO
á
SERIAL NO
FIRST SLOT n TRIG SLOT n
SECOND SLOT n ENABLE
á
DISABLE GPIB/488
á
RS-232
ADDRESS
SRQ ON
á
SRQ OFF
BAUD RATE
á
PARITY
á
FLOW
SCPI
á
HP 3488A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Front-Panel Menu Reference (3488 Mode)
• Turn the knob to select an item at the current menu level.
• Press
Enter
to move to the next level in the menu.
• Press the
same
menu key again to return to the previous menu level.
View MENU
View
ERROR
á
SCAN LIST
á
RELAY CYCLES
S.List MENU
S.List
ADD TO SCAN
á
DELAY TIME
SELECT nnnnn.nnn SECS
Mode MENU
A. Select a Slot
Mode
CONFIG DIO
MODE
CONT POL POS
á
CONT POL NEG
FLAG POL POS
á
FLAG POL NEG
I/O POL POS
á
I/O POL NEG
B. Select a DIO Port
DATA POLARITY
á
DISP FORMAT
DECIMAL
á
BINARY
POS POLARITY
á
NEG POLARITY
Menu MENU
Menu
CARD PAIR
á
CONF EXT TRIG
á
INTERFACE
á
SELFTEST
á
SYST MODE
á
REV INFO
á
SERIAL NO
FIRST SLOT n
SECOND SLOT n
TRIG SLOT n
ENABLE
á
DISABLE GPIB/488 SCPI
á
HP 3488A
ADDRESS
SRQ ON
á
SRQ OFF
Note:
You can operate the 3499A/B/C in either the SCPI mode or the 3488A mode.
• In the
SCPI
mode, you can operate the instrument from the front panel or over the remote interface (GPIB or RS-232) using SCPI commands.
• In the
3488A
mode, you can operate the instrument from the front panel or over the remote interface (GPIB only) using 3488A commands.
2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SCPI Commands Quick Reference
• Square brackets ([ ]) indicate optional keywords or parameters.
• Angle brackets (< >) enclose parameters for which you must specify a value.
Default parameters are shown in
bold
.
• A vertical bar ( | ) separates multiple parameters.
Channel numbers have the form (
@
snn
), where
s
is the slot number and is the channel number. Examples are shown below.
nn
ROUT:CLOS ( @ 111)
ROUT:CLOS ( @ 111,112,203,204)
ROUT:CLOS (
@
101:111)
Switch Commands
[ROUTe:]
CLOSe <
channel_list
>
CLOSe? <
channel_list
>
CLOSe:STATe?
OPEN <
channel_list
>|ALL
OPEN? <
channel_list
>
Specific Plug-in Commands
[ROUTe:]
CPAir <
slot1
>,<
slot2
>|-1
CPAir?
FUNCtion <
slot
2
FUNCtion? <
slot
>
WIRE2
INPut
:ATTenuation[:LEVel] <
port
>,<
dB
>
:ATTenuation[:LEVel]?
|BIWIRE2|WIRE4>
Scan List Commands
[ROUTe:]
SCAN[:LIST] <
scan_list
>
SCAN[:LIST]?
SCAN CLEar
SCAN:SIZE?
Scanning Commands
INITiate
ABORt
TRIGger[:IMMediate]
*TRG
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Scan Configuration Commands
ARM
:SOURce <BUS|EXTernal|
IMMediate
|TIMer|MIX|HOLD>
:SOURce?
:COUNt <
number
>|MIN|
MAX
|INFinity
:COUNt? [MIN|MAX|INFinity]
:TIMer <
seconds
>|
MIN
|MAX
:TIMer? [MINimum|MAXimum]
TRIGger
:SOURce <BUS|EXTernal|
IMMediate
|TIMer|MIX|HOLD>
:SOURce?
:TIMer <
seconds
>|
MIN
|MAX
:TIMer? [MIN|MAX]
[ROUTe:]
[CHANnel:]DELay <
seconds
>,<
channel_list
>|ALL
[CHANnel:]DELay? <
channel_list
>
CONFigure
:EXTernal[:TRIGger]:SOURce <
slot
>
:EXTernal[:TRIGger]:SOURce?
:EXTernal[:TRIGger][:OUTPut] < |1|
OFF
|ON>
:EXTernal[:TRIGger][:OUTPut]?
State Storage Commands
*SAV <
mem
>
*RCL <
mem
>
SYSTem:STATe:DELete <
mem
>|ALL
Valid Memory Locations
01 - 10 (Rev 1.0, 2.0, 3.0)
01 - 50 (Rev 4.0)
Digital Input Commands
SENSe:DIGital:DATA
:BIT? <
bit_port
>
[:<
BYTE
|WORD|LWORD>][:VALue]? <
port
>
[:<
BYTE
|WORD|LWORD>]:BLOCK? <
port
>,<
size
>
Digital Output Commands
SOURce:DIGital:DATA
:BIT <
bit_port
>,<0|1|POS|NEG>
[:<
BYTE
|WORD|LWORD>][:VALue] <
port
>,<
data
>
[:<
BYTE
|WORD|LWORD>]:BLOCK <
port
>,<
block_data
>
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Digital Configuration Commands
SOURce:DIGital
:MODE <
slot
>,<
mode
>
:MODE? <
slot
>
:CONTrol:POLarity <
slot
>,<0|1|POS|NEG>
:CONTrol:POLarity? <
slot
>
:FLAG:POLarity <
slot
>,<0|1|POS|NEG>
:FLAG:POLarity? <
slot
>
:IO:POLarity <
slot
>,<0|1|POS|NEG>
:IO:POLarity? <
slot
>
SOURce:DIGital:DATA
[:<
BYTE
|WORD|LWORD>]:POLarity <
port
>,<0|1|POS|NEG>
[:<
BYTE
|WORD|LWORD>]:POLarity? <
port
>
SOURce:DIGital:DATA
[:<
BYTE
|WORD|LWORD>]:TRACe <
port
>,<
sys_mem_name
>
SOURce:DIGital:TRACe
:DEFine <
sys_mem_name
>,<
size
>[,<
fill
>]
:DEFine? <
sys_mem_name
>
:DEFine:CATalog?
[:DATA] <
sys_mem_name
>,<
block_data
>
:DELete[:NAME] <
sys_mem_name
>
:DELete:ALL
SENSe:DIGital:DATA
[:<
BYTE
|WORD|LWORD>]:TRACe <
port
>,<
sys_mem_name
>
SENSe:DIGital:TRACe
[:DATA]? <
sys_mem_name
>
5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Status System Commands
STATus
:OPERation:CONDition?
:OPERation:ENABle <
unmask
>
:OPERation:ENABle?
:OPERation[:EVENt]?
:PRESet
*CLS
*ESE <
value
>
*ESE?
*SRE <
value
>
*SRE?
*STB?
SCPI Status System
6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
System Information Commands
*IDN?
SYSTem
:CTYPE? <
slot
>
:ERRor?
:VERSion?
DIAGnostic
[:RELay]:CYCLes? <
channel_list
>
[:RELay]:CYCLes:MAX? <
slot
>
[:RELay]:CYCLes:CLEar <
channel_list
>
System-Level Control Commands
*OPC
*OPC?
*RST
*TST?
*WAI
SYSTem:CPON <
slot
>|ALL
DIAGnostic
:DISPlay[:INFOrmation] <
message
>
:DISPlay:STATe <0| |OFF|
ON
>
:DISPlay:STATe?
:MONitor <
slot
>|<
channel
>|<
port
>|-1
:MONitor?
SYSMODE < |1|
SCPI
|HP3488>
SYSMODE?
RS-232 Commands
SYSTem
:LOCal
:REMote
:RWLock
7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3488 Commands Quick Reference
Channel numbers have the form
snn
, where
s
is the slot number and the channel number. Examples are shown below.
nn
is
CLOSE 111
CLOSE 111,112,203,204
CLOSE 101-111
3488A Standard Commands
CLOSE <
channel_address
>[,<
channel_address
>
...
]
OPEN <
channel_address
>[,<
channel_address
>
...
]
VIEW <
channel_address
>
CTYPE <
slot
>
CRESET <
slot
>[,<
slot
>,
...
]
SLIST <
channel_address
>[(,
or
-)<
channel_address
>
...
]
STEP
CHAN [<
channel_address
>]
CMON <
slot
>
DELAY [<
time in milliseconds
>]
3488A Digital Commands
DMODE <
slot
>[,<
mode
>][,<
polarity
>][,<
EI
>]
DWRITE <
slot
><
port
>,<
data
>[,<
data
>
...
]
DREAD <
slot
><
port
>[,<
number of times to read
>]
DELAY [<
time in milliseconds
>]
DBW <
slot
><
port
>,#I<
block data
>
DBR <
slot
><
port
>[,<
number of times to read
>]
3488A System Commands
SYSMODE <0|1|SCPI|HP3488A>
SYSMODE?
RESET
TEST
ID?
STATUS
STORE <1-40>
RECALL <1-40>
ERROR
MASK [<
decimal value
>]
OLAP <1|0>
EHALT <1|0>
DISP <
ASCII character string
>
DON/DOFF
LOCK <1|0>
8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Error Messages
See Chapter 6 in the 3499A/B/C User's Manual for more information.
Execution Errors (SCPI Mode)
-101 Invalid character
-102 Syntax error
-103 Invalid separator
-105 GET not allowed
-108 Parameter not allowed
-109 Missing parameter
-112 Program mnemonic too long
-113 Undefined header
-121 Invalid character in number
-123 Exponent too large
-124 Too many digits
-128 Numeric data not allowed
-131 Invalid suffix
-134 Suffix too long
-138 Suffix not allowed
-148 Character data not allowed
-151 Invalid string data
-158 String data not allowed
-161 Invalid block data
-168 Block data not allowed
-178 Expression data not allowed
-222 Data out of range
-223 Too much data
-224 Illegal parameter value
-310 System error
-350 Queue overflow
-410 Query INTERRUPTED
-420 Query UNTERMINATED
-430 Query DEADLOCKED
-440 Query UNTERMINATED after indefinite response
+0 PASSED
+1 ROM test failed
+2 GPIB test failed
+3 RS-232 test failed
+4 Front panel test failed
Instrument Errors (3488A Mode)
100 Number of SAV/RCL out of range
101 Unable to recall - scan is running
102 Unable to recall - memory is empty
103 Unable to recall - modules were changed
104 Unable to store - scan is running
110 Slot number out of range
111 Data out of range
112 Not able to perform requested operation
113 Block name not exist
114 Block name already exist
115 Two Blocks already exist
116 Channel number out of range
201 Scan list is empty
202 Scan initiated
203 Scan init ignored
204 Trig ignored
206 Too many channels
207 Card in use
208 N2282A execution error
300 Unable to execute this command in local mode
501 RS232 data receiving error
502 Internal command error
503 RS232 only - unable to execute on GPIB
Error Conditions (3488A Mode)
In 3488A mode, you can query the error queue when the ERROR annuciator is on. The value returned is equal to the sum of the values of the possible error conditions:
1
2
4
8
16
Syntax Error
Execution Error which include:
a b c
Parameter out of range
Module type mismatch
Attempt to access a non-existent stored state or scan list
Hardware Trigger too fast
Logical Failure
Power Supply Failure
Note:
If the string “+00000” is returned by the
ERROR command, the error queue is empty.
If this is the case, “0000” is displayed on the front panel.
9
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Factory Default and Reset States (SCPI Mode)
Input/Output Configuration
Interface
GPIB Address
System Mode
Baud Rate (RS-232)
Parity (RS-232)
Flow Control (RS-232)
Module-Related Operation
Switching Channels
Digital I/O Ports
Card Pair
System-Related Operation
Display State
Stored State
Error Queue
Scan-Related Operation
Scanning
Scan List
ARM SOURce
ARM TIMer (seconds)
ARM COUNt
TRIGger SOURce
TRIGger TIMer (seconds)
Channel Delay (seconds)
Trigger Out Pulse
Factory Default State
GPIB
09
SCPI
9600
Odd (7 Data Bits)
XON/XOFF
Factory Default State
Open
Input
None
Factory Default State
On
Empty
Empty
Factory Default State
None
Empty
IMMediate
0
1
IMMediate
0
0
Disabled
Reset State
Keep current setting
Keep current setting
Keep current setting
Keep current setting
Keep current setting
Keep current setting
Reset State
Open
Input
None
Reset State
On
Keep current setting
Empty
Reset State
Stop scan in progress
Empty
IMMediate
0
1
IMMediate
0
0
Disabled
Factory Default and Reset States (3488A Mode)
Input/Output Configuration
Interface
GPIB Address
System Mode
Module-Related Operation
Switching Channels
Digital I/O Ports
Card Pair
System-Related Operation
Display State
Stored State
Error Queue
Scan-Related Operation
Scanning
Scan List
Factory Default State
GPIB
09
SCPI
Factory Default State
Open
Input
None
Factory Default State
On
Empty
Empty
Factory Default State
None
Empty
Reset State
Keep current setting
Keep current setting
Keep current setting
Reset State
Open
Input
None
Reset State
On
Keep current setting
Empty
Reset State
Stop scan in progress
Empty
10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Plug-In Module Selection Guide
Multiplexer Modules
Module Description
N2260A 40-Channel
N2266A 40-Channel
Max
Voltage
200 V
200 V
Max Current
Per Channel
# Slots Terminal Blocks/Cables
1 A
0.5 A
1 Slot N2290A Screw Terminal
N2297A DIN96-to-Twin D50 Cable
N2299A DIN96-to-Quad D25 Cable
N2290A Screw Terminal
1 A
2 A
2 A
1 Slot
2 Slots N2320A Crimp-and-Insert Kit
1 Slot
1 Slot
N2297A DIN96-to-Twin D50 Cable
N2299A DIN96-to-Quad D25 Cable
44480A Screw Terminal
44480B Screw Terminal
N2270A 10-Channel
44470A 10-Channel
44470D 20-Channel
Module Description
N2261A 40-Channel
N2267A 8-Channel
44471A 10-Channel
44471D 20-Channel
44477A 7-Channel
Matrix Modules
Module Description
N2262A 4x8 Matrix
44473A 4x4 Matrix
1000 V
250 V
250 V
General-Purpose Relay Modules
Max
Voltage
200 V
250 V
250 V
250 V
250 V
Max
Voltage
200 V
250 V
Max Current
Per Channel # Slots Terminal Blocks/Cables
1 A 1 Slot N2291A Screw Terminal
N2297A DIN96-to-Twin D50 Cable
N2299A DIN96-to-Quad D25 Cable
N2327A Crimp-and-Insert Kit 8 A
2 A
1 A
2 A
1 Slot
1 Slot
1 Slot
1 Slot
44481A Screw Terminal
44481D Screw Terminal
44487A Screw Terminal
Max Current
Per Channel # Slots Terminal Blocks/Cables
1 A
2 A
1 Slot
1 Slot
N2292A Screw Terminal
N2298A DIN96-to-D25 Cable
44483A Screw Terminal
Digital I/O Modules
Module Description
N2263A 32-Bit TTL
44474A 16-Bit TTL
Max
Voltage
42 V
30 V
Max Current
Per Channel # Slots Terminal Blocks/Cables
0.6 A
0.125 A
1 Slot
1 Slot
N2293A Screw Terminal
N2297A DIN96-to-Twin D50 Cable
N2299A DIN96-to-Quad D25 Cable
44484A Screw Terminal
Breadboard Module
Module Description
44475A Provides space for customized circuitry
# Slots Terminal Block
1 Slot 44485A Screw Terminal
Continued on next page
á
11
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Module Selection Guide (cont'd)
Multifunction Modules
Module Description
N2264A 12-Chan GP
3-Chan GP
16-Bit DIO
N2265A 4x4 Matrix
16-Bit DIO
Max
Voltage
200 V
125 V
42 V
200 V
42 V
Max Current
Per Channel
1 A
5 A
0.6 A
1 A
0.6 A
# Slots Terminal Blocks/Cables
1 Slot N2294A ScrewTerminal
N2297A DIN96-to-Twin D50 Cable
N2299A DIN96-to-Quad D25 Cable
1 Slot N2295A ScrewTerminal
N2297A DIN96-to-Twin D50 Cable
N2299A DIN96-to-Quad D25 Cable
Optical Multiplexer Modules
(typical specs)
Module Description
N2280A Quad 1x2
N2281A Dual 1x4
N2282A Single 1x8
Insertion
Loss
0.5 dB
0.5 dB
0.5 dB
Stability# Slots Connectors
± 0.03 dB
± 0.03 dB
± 0.02 dB
2 Slots SC/APC Connectors on Module
2 Slots SC/APC Connectors on Module
2 Slots SC/APC Connectors on Module
RF and Microwave Modules
Module Description
N2268A Dual 1x4
N2272A Single 1x9
N2276A Dual 1x6
Dual 1x4
Insertion
Loss
<0.35 dB
<0.5 dB
<0.36 dB
<0.36 dB
Cross Talk
<-64 dB
<-75 dB
<-100dB
<-100dB N2276A/
Opt 204
N2276B Supports 2 external microwave switches or attenuators (sold separately).
44472A
44478A
44478B
44476A
44476B
Technical specifications vary depending on external switch selection.
Dual 1x4
Dual 1x4
Dual 1x4
Triple 1x2
<0.75 dB
<1.1 dB
<1.1 dB
<0.25 dB
<-85 dB
<-70 dB
<-70 dB
<-90 dB
Supports 2 external microwave switches
(sold separately). Technical specifications vary depending on external switch selection.
# Slots Connectors
1 Slot SMA Connectors on Module
1 Slot BNC Connectors on Module
3 Slots SMA Connectors on Module
3 Slots SMA Connectors on Module
3 Slots Typically SMA Connectors on external switches
1 Slot BNC Connectors on Module
1 Slot BNC Connectors on Module (50 W )
1 Slot
BNC Connectors on Module (75 W )
1 Slot SMA Connectors on Module
1 Slot Typically SMA Connectors on external switches
© Copyright Agilent Technologies, Inc. 1999, 2002
Printed in Malaysia
November 2002 E1102
*03499-90018*
03499-90018
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff at our full-service, in-house repair center
Instra
View
SM
REMOTE INSPECTION
Remotely inspect equipment before purchasing with our interactive website at
www.instraview.com
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
LOOKING FOR MORE INFORMATION?
Visit us on the web at
www.artisantg.com
for more information on price quotations, drivers, technical specifications, manuals, and documentation
Contact us:
(888) 88-SOURCE | [email protected] | www.artisantg.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project