Makita | 51778 | User manual | Laser Levels
Add to my manuals52 Pages
Makita 51778 is a multi-voltage oscillating multi-tool that can assist in a variety of cutting, scraping, and sanding tasks in your next project. Whether you're a seasoned DIYer or a novice, the tool’s user-friendly design, variable speed control, and universal accessory system (Starlock) will help you get the job done.
advertisement
2005 - 2006
R I G H T A T T H E T O P
Foreword
Welcome to the 2005/2006 CR Kennedy Surveying & Construction equipment catalogue.
The last twelve months have again seen some major technological initiatives from Leica GeoSystems.
We are pleased to present-:
- New series 1200 Total Stations and GPS which allow full data transfer between the instruments – our X Factor
- New SmartStation, a world fi rst incorporating GPS into the
Total Station
- New Sprinter digital levels
- New Rugby 300/400 series grade lasers
- New HDS 4500 Hi Speed 3D laser scanners
- New Rail and Underground Systems
- New Machine Automation for graders and excavators
From Optech in Canada the new wireless Cavity Monitoring System has been widely accepted in the Australian market which leads the world in the use of these stope scanning devices.
Our construction equipment basket has been further enhanced by many new and innovative models from Robotoolz.
CR Kennedy aims to be the “total solution” provider. The products listed in this catalogue have been carefully chosen to represent the highest quality in the industry.
We have also strengthened our states, opened a new offi ce facility in Sydney and established our business in New Zealand.
We hope you enjoy our new catalogue and we look forward to being of service to you…
Stephen Beard
Director
*The item codes displayed are C.R. Kennedy codes and are not necessarily the codes used by the manufacturer. The items displayed in this catalogue are a cross section of available goods and are not our entire product range.
Total Stations & Theodolites
TCRP1200
TCR110
TCR400
Total Station
Angular acc. 1 sec, 2 sec, 3 sec or 5 sec.
Measuring acc. 2mm + 2ppm.
3mm + 2ppm no prism.
Range
Recording Flash card, RS232 interface.
The RX1220T remote control is a compact handheld controller that enables a one person total target point itself or from any other desired position.
www.leica-geosystems.com
4
LEICA TCR110 Total Station
Angular acc. 10 sec (5mm@ 100m)
Measuring acc. 5mm + 3ppm
Range 500m. 80m no prism
Plummet Laser
Survey Equipment
LEICA T110 Theodolite
Resolution 10 seconds.
Min display 10”/5”/1”
selectable.
LEICA 400 Basic Series
Total Station
Angular acc. 3 sec, 5 sec or 7 sec
Measuring acc. 2 mm, + 2ppm
Range 3.5km. 80m no prism
Memory 10,000 points, RS232
Plummet Laser
20 seconds.
30 x.
5 x AA Batt.
15 hrs.
In Base,
2 x mag.
LEICA 800 Performance Series
Total Station
Angular acc. 2 sec, 3 sec or 5 sec
Measuring acc. 2mm + 2ppm
Range 3.5km. 170m no prism
Memory 8000 + points. RS232
interface
Plummet Laser
Apha numeric keyboard as standard www.pentaxsurvey.com
2,3,5 or 6 sec.
1.5 - 4km.
In Base laser.
5mm + 3ppm.
Up to 200m.
30x.
Yes.
Yes.
20,000 points.
5
LEICA SmartStation
Leica Geosystems announces a new and
revolutionary surveying system. Smart
Station is the world’s fi rst TPS and GPS system, perfectly combined. Essentially,
SmartStation is a high performance total station with a powerful GPS receiver.
No need for control points, long traverses or resections. Just set up SmartStation and let GPS determine the position. Then measure & stake out with the total station or GPS.
* Survey easier, quicker & with fewer set
ups.
* Use TPS or GPS separately as required.
* Put the SmartAntenna on a pole as an
RTK rover.
* Use the TPS as a standard total station
or Robotic.
* Undertake any type of survey job.
* Save time and money.
* Increase your productivity and profi ts.
* All TPS1200 total stations can be
upgraded to SmartStation.
SmartStation’s modular design gives you all the options.
SmartStation.
Total Station
www.leica-geosystems.com
6
Survey Equipment
with integrated
GPS.
www.crkennedy.com.au
7
LEICA GPS
Leica GPS 1200
The Leica 1200 GPS system sets the world standard in
GPS surveying. From its small size and light weight to its modular design, the System 1200 has been engineered for outstanding performance. Faster than ever, and providing effi cient cost-effective single and dual frequency solutions for every possible application.
The modular concept of system 1200 allows you to set up the receiver wherever and however you want - on a tripod, or a pole, with a backpack, on a vehicle or a machine. It is extremely versatile & offers the fl exibility users have come to expect from Leica Geosystems.
Leica GPS1200 Options
Leica system1200 receivers provide all the fl exibility, power & performance needed for every type of GPS application.
GPS GX1230 GX1220 GX1210
Channels 12L1 +12L2 12L1 +12L2 12L1 12L1 + 12L2
Yes only)
Yes only)
Status Indicators 3 LED indicators: for Power, tracking, memory
Ports
Voltage
1 power, 3 serial, 1 controller & 1 antenna port
12V
Event input & PPS Optional Optional Optional
+1power , 1 ethernet
Standard
Leica Geo Offi ce (LGO) Desktop software
Everything you need in a single software package for GPS and TPS: imports, visualization, conversion, quality control, processing, adjustment, reporting and export.
www.leica-geosytems.com
8
Survey Equipment
Leica Geosystems SPIDER GPS Reference Station Software
Spider is a new, advanced, affordable software for controlling and operating GPS reference stations and networks.
Spider can control single reference stations providing GPS data to local areas as well as complete networks of stations supplying GPS services over entire regions, states and even countries.
Once started, a Spider reference station network runs continuously and automatically.
Leica GIS Receivers : GS20 & GS5+
The GS20 PDM - Professional Data Mapper combines the accuracy and capabilities of a professional-grade GIS data collection system with the ease-of-use of a recreational
GPS unit.
GS-20
GS5+ Antenna
Leica GS5+ Integrated Antenna
With integrated high accuracy Leica GPS/GIS data acquisition antenna there is no need for separate differential units, external antennas, splitters and excessive wiring. This system connects to almost all PDA’s and data loggers via an NMEA output string.
Leica SR20 Single frequency survey receiver
The Leica SR20 GPS receiver is an easy to use single frequency survey grade device. The SR20 also offers the added benefi t of supporting all forms of static & kinematic surveys.
www.crkennedy.com.au
9
www.leica-geosystems.com
10
Survey Software
Leica Geosystems RoadRunner
RoadRunner is the completely new alignment stakeout application program for System 1200 – the same program and functionality is available for both
GPS1200 and TPS1200.
If you are in anyway involved in the staking out or checking of alignments
– roads, railways, pipes or any other alignments – then you should defi nitely take a close look at RoadRunner – you will be amazed at what it can do.
As RoadRunner is a stringline based application it has no problems dealing with tight curves and other situations
“cross-section based software” cannot handle.
The image below shows how an alignment would appear on-board the
RoadRunner application.
checks and guidance mean that you stakeout the way you want to stakeout.
Graphical stakeout graphical stake page stakeout is quicker and easier with RoadRunner. As with the System 1200 Stakeout application program, the graphics and orientation methods of staking out can be confi gured for both the GPS and TPS instruments.
The RoadRunner software package allows complete fl exibility when either staking out, viewing data or recording results.
Flexibility: Work the way you want.
RoadRunner offers total fl exibility which allows you to customise it to the way you work. Confi gurable Info pages and
Logfi les mean that you see only the information that you need to see.
www.crkennedy.com.au
11
LEICA ACCESSORIES
Retro targets
20/ 40 or 60MM
LG734752
GEB111 or GEB121
for 1100 Series TPS or 500 series GPS.
LG733271
LG733258
LG166637
GDZ2 Thermometer
GLS14 Mini pole
ZNL
Plummet LG406853
LG733269
GEB211
GEB221
LG733270
LG403427 www.leica-geosystems.com
12
GZR4
360 degree prism-
LG639985
GPR111 - LG641618
Basic
prism
plastic
Survey Accessories
GDF111 no o/plummet. LG667305
GRT144
Prism carrier
LG667313 GDF112 with o/p.LG667308
GDF121 no o/p. LG667304
CRC
Adaptor
GPR121 - LG641617
Pro
prism
metal
LG726842
SNLL121
Laser plummet
GDF122 with o/p. LG667307
LG641762
Monitoring prism
Mini prism
Target
LG362823
Prism
LG362830
Holder
LG362820 www.crkennedy.com.au
13
SNLL111
Laser
Plummet
GMP111 Mini prism with poles LG641615
CST ACCESSORIES
Metal prism assy.
5/8 base
Mini prism &
531507 526057
532513 532515
Standard prism
531100
531010
Metal prism assy.
Leica base
526052
Mini prism & bag. Leica base
580654
Illuminated prism
Leica style
prism
541027
Plastic prism assy.
5/8 base
Mini prism plastic.
5/8 base
533024
531200 526053
14
Survey Accessories
With plummet
Tribrach adaptor w
Removable centre
522070
Fixed adaptor
522010
Tribrach adaptor
no o/p
519426
Rotating adaptor
522521
519425
3.6m - 534512
15 www.crkennedy.com.au
MACHINE AUTOMATION
Leica MC1200 Grader system.
Universal Machine Control
Leica MC1200 Control Panel.
Based on the all new CAN-Bus Leica Geosystems Technology, the MC1200 universal Machine
Control System sets the new standard for Machine Control Systems. Modular, robust, fast and reliable – all the qualities you have come to expect from Leica Geosystems.
Works on Graders with ultrasonic and/or slope/ laser receiver mast/s.
Works on Pavers with ultrasonic, slope and laser receiver.
Works on Dozers with single/ dual masts for laser and/or slope.
The universal dual control panel is very user friendly
& works on any machine.
* User friendly operator panel. * Universal machine capability. * Shock and vibration resistant. * Menu structure guides the operator through all system operations. * Integrated display lights show blade position & system status at a glance. * Dedicated function buttons – operators can develop a “feel” for the system so operation is second nature. * Optional “Multistick” fi ngertip controls keep the operator’s hands safely on the control levers.
* Uses Leica’s unique patented ultrasonic triangulation for automatic blade sideshift operation. * Simplifi es operator training. Minimises support & maintenance requirements. * Wide operating temperature range for open or enclosed cab. * Wide input voltage range compatible with all machine electrical systems.
PRO Control and CAB sensor
Proportional sensor and panel systems 360° Laser Control
• Constant accuracy band control
• Ultra-bright LED display
• Rough/fi ne grade bandwidths
• Works with electronic mast systems
• Manual or fully automated systems
• 360° sensor. 100% waterproof
Depthmaster 200 – Sensor
Machine Control Receiver
• Constant Accuracy Band Control
• Magnetic or bracket mounted
• Patented plumb indicators
• Ultra-bright LED displays
(front & back)
• Self-contained rechargeable battery. www.crkennedy.com.au
16
Concrete
Machine Automation
Grading
SAVE TIME AND MONEY...
INTRICATE MACHINE CONTROL
AT THE TOUCH OF A BUTTON.
Save time and work more effi ciently with the automatic
Leica 3D Machine Guidance System - GradeStar for graders and dozers, LMGS-P for road trimmers, profi lers and asphalt pavers, and LMGS-S for concrete pavers.
Complex designs are quickly and precisely achieved according to your exact project data.
Leica Geosystems 3D system controls your machine with your choice of either a high precision Leica
Total Station or GPS system - these instruments are also suitable for all typical survey tasks.
These 3D systems maximise your machines productivity and dramatically reduce earth moving costs. The total station system enables high grading accuracy, with
+/- 5mm in height and +/- 10mm for position, easily achieved. For lower accuracy requirements GPS based systems are available.
Asphalt
. Leica’s GradeStar system can easily be retro fi tted
to most common machines.
. Increased productivity, materials saving and improved
quality of the fi nished project.
. Possible to work with half the blade beyond
the edge of the project.
. Automatic detection of u-turns.
. Minimum training required.
. Easy to use display interface.
360 degree
Precision Prism
Automatic Total Station www.leica-geosystems.com
17
LEICA GRADESTAR
Leica Geosystems
GradeStar
3D machine
automation.
For
Graders
& Dozers.
www.leica-geosystems.com
18
Machine Automation
Leica GradeStar for grader or dozer is a 3D machine automation system.
GradeStar uses either TPS or GPS measurements to track the position of the machines on the earth’s surface.
This actual position is then compared to the engineers design profi le of the new surface. The new surface can be defi ned by either triangulations ( DTM or TIN ) or electronic stringlines.
GradeStar computes the difference between the actual and design position, and reports the cut/ fi ll value to the machine operator. The machine can then be manually or automatically guided to the design surface.
The GradeStar system completes the
Leica Geosystem’s solution in the fi ne grading fi eld and provides full fl exibility for the operator. It is compatible with older versions but is now based on embedded Windows XP technology.
The operator can easily switch from either a GPS or TPS based system as it is all based off a single mast solution.
Like the former version it utilises Laser
Alignment’s very popular 2D machine control systems. All Sonicmaster and
ProControl systems in the market can be easily upgraded to 3-D functionality and still be used as a conventional sonic or laser based system. t for our customers, through a combination of our high-end GPS and TPS technology we can offer the best solution in the market.
www.leica-geosystems.com
19
LEICA MC200 Digger
MC200 sensors.
LEICA MC200 Excavator System
• Utilising robust and futureproof
CANBus technology.
• The 500g shock-resistant sensors
can additionally be used with a
rock breaker attachment.
• Displays real-time digging for
depth reading & target indication.
• Dial-in or “Learn & Dig” any slope
or gradient.
• Alarm setting for maximum height
or depth.
• Laser catcher keeps depth to an
absolute reference.
• Real-time bucket rotation display.
• Up to 9 different bucket sizes and
attachments supported.
• Metric or Imperial units displayed.
• Accurate to centimetres!
• Able to record tarr weights!
• GPS compatible!
Dig your way to greater profi tability!
www.leica-geosystems.com
20
Machine Automation
MIKROFYN MIKRODIGGER
Mikrofyn Mikrodigger System
• Easy to use, one button control.
• Bucket position indicator eliminates costly graphical display.
• 4 extra inputs for zero up/down etc, placed on operating levers.
• Very bright LED display for height.
• The quick reacting display settles
in less than 1 sec.
Mikrodigger display and sensors
• May be fi tted with rotational sensor.
• Quick change possible between 20 different bucket settings, stored by name.
• Slopes displayed as %, deg, gon, or
1:XXX.
• The moveble display is generally mounted in the cabin.
• High power beeper, muteable.
• Very rugged and 100% waterproof MIKRODIGGER
Three inclination sensors, used for measuring the angle of the boom, stick, and bucket, feed information to the Main Display Unit, the XC-1, which makes the calculations.
The operator just establishes a known reference point, sets the desired depth and slope, then chooses
FIXED DEPTH or SLOPE mode and starts digging.
The Main Display Unit indicates the actual depth via a bright
LED numerical display and the operator is able to determine HIGH,
ON GRADE or LOW with the aid of three lights or an audible alarm.
Mikrodigger. At work all over the world!
www.mikrofyn.com
21
High-Defi nition Surveying
HIGH-DEFINITION SURVEYING HDS
The new HDS series from Leica Geosystems represents the next generation of 3D laser scanners. Accurate spatial datasets “point clouds” are quickly and easily captured, resulting in a valuable 3D representation of the required scene on your PC. Take simple dimensions or create traditional survey deliverables.
The HDS series are the ideal tool for capturing accurate dimensional information of complex structures or areas that are diffi cult to survey.
CYCLONE SOFTWARE
Cyclone is an award-winning 3D point cloud modeling software designed to allow multiple users to work on the same point cloud at the same time. The software is ideally suited for the creation of complex 3D models of processing plants and complicated structures. Digital Terrain Model’s, Contours, Volumes and Surface Areas can also be generated from Cyclone Software. www.leica-geosystems.com
22
Laser Scanning
Riegl Scanning system
Riegl Laser Scanner, the ideal choice for rapid acquisition of high quality 3D data.
Riegl LMS-Z420
• Riegl LMS-Z420 Laser Scanner offers a unique combination of fast acquisition, long range and high accuracy, resulting in a 360 degree panoramic colour image.
• Range up to 800m, accuracy of up to 10mm.
• Integration of Photogrammetry and Laser Scanning.
• Easily fl y through the 3D data and measure distances, surface area, volumes and much more.
• Survey mines, tunnels & complex structures easily and safely.
• The Riegl Scanner works with standard Windows PC or notebook.
23 www.crkennedy.com.au
Riegl
LMS- Z420i
Laser
Scanner
www.optech.ca
24
Laser Measuring
Leica TMS Profi le
TMS Profi le consists of two components: TMS Offi ce/ProFit (for PC) and TMS
ProScan (for total station).
TMS Offi ce manages tunnel geometry such as horizontal & vertical alignments, design profi les and control stations. This information can be loaded onto a Leica
TPS1100 or TPS1200 refl ectorless motorised instrument eg. TCRM, TCRA or
TCRP.
TMS Proscan application runs on board TPS1100 or TPS1200 & allows automatic measurements of either vertical or horizontal profi les in tunnels or shafts. Once an initial profi le is measured, parallel profi les can be measured from the same station.
Direct evaluation compares tunnel design to actual measurements on the spot.
The instrument turns to areas of over or under break and marks it with a red laser spot for marking up and correction.
Measured profi les can be loaded into ProFit for further evaluation & producion of graphical and tabular reports such as - work as executed reports, clearance profi les for rail tunnels, shotcrete thickness and volume computations.
TMS ProScan in action
25
Leica total station used www.leica-geosystems.com
LEICA DISTO
™
Leica
Leica
Disto
™
Lite
Leica
Disto
™
viewer
LG740693
DISTO™ stands for fast, accurate and reliable distance measuring inside or outside.
DISTO™ is the fi rst hand held laser metre in the world that measures indoors and outdoors to up to 200 metres, in ideal circumstances, with a precision of +/-
1.5mm; Lite 5 is +/- 3mm.
Whilst all three DISTO™ models offer such features as area, volume, built in bubble and measurement from the front or back of the unit, the Classic also has a number of additional benefi ts. These include a built in view fi nder for outdoor use, pythagorean functions, a 1/4 inch tripod mounting point, tapered base, 15 point memory and a 10 point memory for presets.
With numerous accessories and a modern design, DISTO™ is available in three model confi gurations for use in a variety of situations and trades. www.disto.com
26
Laser Measuring
The Leica DISTO™ plus is the only device in the world that offers the highest accuracy, attractive design and wireless data transfer by means of BLUETOOTH technology.
Even if you are currently still working with pen and paper, the integrated Leica Disto™ technology allows you to make the change at any time. Utilising some PC device this allows you the ability to record measured values electronically in the fi eld as you work.
Utilising the free Disto software which is provided with the Plus, you can draft in the fi eld or save to Excel on a HP Ipac.
Hp iPAC
The DLSA Disto ™ Laser Distance Measuring modules are powerful and easy to integrate distance measuring devices designed to meet the demands of the industrial measurement market. The new DLSA models offer increased measuring performance over the hand held
Disto ™ with the added benefi t of a strong metal body, multi point mounting system as well as a variety of cable communication options.
Used in situations where the Disto ™ needs to be permanently, or semi permanently, mounted to measure to a fi xed target. The DLSA Disto ™ , unlike a hand held Disto ™ , is both powered and controlled remotely from a PC or other computer device. Utilising a variety of readily available software, the DLSA Disto ™ can be made to measure and send this info back to the pc, at set intervals over a defi ned period (eg, take a measurement every 5 seconds for the next 24 hours) or be made to measure on command, or continuously in tracking mode.
DLSA unit
27 www.dimetix.com
LEICA GRP3000 rail survey system
GRP3000 - A lightweight Rail Trolley System which allows measurement and recording of railway geometry. It can be carried and operated by one person and is available for all rail gauges.
GRP3000 accurately measures and records gauge, superelevation and metreage with the press of a button.
In addition, GRP3000 uses an accurate refl ectorless servo distance meter to take automated profi les or single measurements for detail surveys which are recorded onto a ruggedised portable computer.
A various of reports can also be generated for graphical outputs of profi les.
www.crkennedy.com.au
28
Rail Alignment system
The GRP Rail survey system can be used in two modes:
Relative Mode: allows automatic recording of measurements in tunnels, cuttings, underneath bridges or details along open track in relation to track alignment. These measurements can be compared to a design for clearance measurements.
Absolute Mode: The addition of a Leica automated total station
(System1000,1100 or 1200) with radio link enables measurement of true track geometry and coordinates of profi le points.
This system can be used for construction of slab-tracks and export of data to tamping machines.
Ruggedised PC control unit.
Variable guages.
Lightweight
system -
- 25 kg.
Leica GRP 3000
Electrically isolated rollers.
Leica total station.
29 www.leica-geosystems.com
LEICA LASER LEVELS
RUGBY - 100. General
use laser level.
RUGBY 100LR.
• 300m working diameter.
• Self levelling range ± 3°.
• Manual mode for matching control points and grades up to 10%.
• Accuracy of +/- 2.3mm per
30m.
• Uses alkaline batteries or rechargeable battery pack.
• Water resistance watertight to IPX-6 standard.
• Variable rotation speed.
• Class 2 laser.
• With height alert.
RUGBY 200. Horizontal &
• • Automatic horizontal & leveling.
•
• 1,000 feet (300m) working diametre with sensor. diametre with sensor.
• Accuracy of +/-1.5 mm per
30 m.
• Accuracy of +/-1.5 mm per
• Manual with cross-axis
30 m. self-levelling up to 10%.
• Plumb beam for 90
• H.I. (elevation) alert:
degree layout work. automatic and separate
• Plumb down feature. switch.
• H.I. (elevation) alert:
• 2 head speeds: 5 and 10 automatic and separate
RPS. switch.
• Housing made from co-
• Four head speeds: 0, 1, 2, molded rubber and high-
5, 10 RPS. impact plastic.
• Housing made of molded
• Waterproof and dustproof rubber and high-impact to work reliably in all plastic. weather and jobsite
• Waterproof & dustproof. conditions.
• Remote control also shown.
LG731558
LG733621 www.leica-geosystems.com
30
Laser Levels
RUGBY 300. Horizontal automatic single grade.
RUGBY 400. Horizontal automatic dual grade.
• Stainless steel ball bearing
pendulum.
• Automatic single grade,
+ 25% or -5%.
• Greater than 750m working
diametre.
• 12 arc second accuracy at level, +/- 1.2mm @ 30m.
• Auto shut-off if knocked off
grade.
• Large, easy to read LCD
display.
• Uses alkaline or
rechargeable battery pack.
• Optional scope.
• Stainless steel ball bearing
pendulum.
• Automatic dual grade,
+25% or _5%.
• Greater than 750m working
diametre.
• 12 arc second accuracy at level, +/- 1.2mm @ 30m.
• Auto shut-off if knocked off
grade.
• Large, easy to read LCD
display.
• Uses alkaline or rechargeable battery pack.
• Optional scope.
• Remote control also shown.
Rod-Eye
Classic
Sensor
Pipe Lasers
LG725870 LG726116 www.crkennedy.com.au
31
Red or
Green beam.
MIKROFYN LASER LEVELS
• 0 to ± 10% Grade adjustment • 0 to + 10% Grade
• Levelling in both horizontal
range in both axes. adjustment range in one
and vertical planes.
• Grade can be reversed. axis.
• 10° Automatic levelling
• Self calibrating. • Self calibrating.
range.
• Levelling in horizontal. • ±10° Automatic levelling
• ±10° Lateral adjustment
Optional vertical model also range.
left/ right.
available. • Diode Laser 780 nm.
• Diode Laser 780 nm.
• ± 10° Automatic levelling
range.
• Led Display.
Complete with: Case, hand
Complete with: Case, hand
held detector, battery and
charger.
right.
charger.
• Can be controlled remotely by
IR.
• Diode Laser 780 nm. ML-3
• LCD display.
Complete with: Case, hand
held detector, battery and
charger.
ML-2
ML-4 www.mikrofyn.com
32
Laser Levels
ML10 - 14 now enjoy a
three year warranty!!
• Self levelling vert & horiz.
• Plumb up / right angle.
• Dual dial in grade to 10%.
• +/- 1.5mm @ 30 metres.
• Visible beam.
• 150 m radius.
• scan mode.
• with wall bracket.
• “Makita type” batt system.
• 1 hour charge/ 30 hours life.
ML-14
• Self levelling vert & horiz.
• Plumb up / right angle.
• Dual dial in grade to 10%.
• +/- 1.5mm @ 30 metres.
• Visible beam.
• “Makita type” batt system.
• 1 hour charge/ 30 hours life.
ML-13
• Self levelling horizontal.
• Single grade to 10%.
• +/- 1.5mm @ 30 metres.
• 150 m radius.
• “Makita type” battery.
• 1 hour charge/ 30
hours battery life.
MLP-120C Pipe Laser
• Conventional Diode Laser 635nm. • Beam diameter 10mm. • Power output up to 4mW.
• Laser beam with circular cross section that maintains for a distance of more than 100m.
• Grade adjustment range +50% to -15%.
• Automatic levelling range +45% to -20%.
• Cross axis ±10%. • Automatic cross axis compensation ±10%. • Self calibrating.
• High intensity LED display, viewable from a distance of several meters. • IR Remote controlled. Complete with: Case, remote controller, battery and charger (1 hr recharge).
www.crkennedy.com.au
33
•
•
• 150 m radius.
• “Makita type” battery.
• 1 hour charge/ 30
hours of battery life.
ROBOTOOLZ
519757
Self-levelling pendulum
519805
Hand held size
Out of level sensor
RT7600-5 (519757)
* Quick & easy, gravity self levelling.
* 5 laser beams/ dots produced.
* 3 horizontal dots, one up/ one down.
* Excellent for levelling points, plumbing up or for defi ning a right angle.
* Accuracy of +/- 6 mm @ 30m.
* Pendulum lock to maintain accuracy during transit. Don’t be without one!
RT7510-3 (519805)
* As above, with 3 laser beams rather than 5.
* Plumb up, plumb down and one horizontal
519808
RT5250-1 (519775)
* Horizontal laser plane auto levelling, accuracy +/- 3mm @ 30m, and manual vertical laser plane levelling.
* 100m radius with receiver,
(staff bracket also included).
* Several use modes available including laser dot mode, constant line mode or dither/scan mode.
RT5250-xp (519808)
* As above, with extra bright beam &
plumb up beam, or right angle.
“Dual Head”
RT7690-2
* Quick and easy gravity self
levelling for both horizontal &
vertical laser planes.
* Comes with a receiver/ remote
control & staff bracket.
* 100 m radius with receiver.
* Accuracy of +/- 3 mm @ 30m.
* Wall bracket available for side use.
* The laser level for almost
519780 all levelling jobs! www.crkennedy.com.au
34
RT7610
* 5 beam, electronic self levelling.
* 3 laser dots produced horizontally, also with one beam up and one down.
* Great for levelling points, plumbing up or for setting a right angle.
* Also includes an out of level indicator.
RT7615-2
* Automatic levelling, two laser beam cross liner.
* Gravity pendulum levelling system used for quick set up time.
* Graduated 360 degree base with locks at 90 degree increments allow angular layout.
* Out of level indicator helps eliminate errors.
RT7210-1
* The original Robotoolz laser level, this model offers automatic horizontal levelling.
* Through the use of the remote control, either one horizontal dot, or a series of dots, can be ov level.
* Ceiling levelling was never this easy.
Laser Levels
519761
519779
RT3620-2
* The RT3620 is a manual levelling laser level providing plumb up, as well as horizontal and vertical laser planes.
* The plumb beam also provides a right angle when used in vertical mode.
* Also with dot and dither modes, the
3620 includes a receiver & bracket.
RT
1250 4m pole.
519809
35
LEVELS
LEICA NA2
- Accuracy potential 0.7mm.
- 0.3mm with parallel plate
micrometer.
- 32 x magnifi cation.
- 1.6m shortest focus range.
- 0.3 second compensator accuracy.
Leica Sprinter Digital levels
- Models - Sprinter 100 & 100m, Sprinter 200 & 200m.
- Accuracy 2.0mm (100), accuracy 1.5mm (200).
- Internal memory of 500 points for M models.
- Measuring modes - tracking & single.
- Measuring time of 3 seconds.
- Range to Standard staff 2m to 80m.
- GSI format via RS232 (M versions only)
- Utilises 4 x AA batteries. Nicad batteries available.
- Dust/ water resistant to IP55 standard.
- Weight of less than 2.5 kg.
Leica
DNA03 & DNA10
Digital levels
- Programs - Measure & Record, staff height/distance
- Accuracy to 1.5mm (0.9mm with invar) - DNA10
- Accuracy to 1mm (0.3mm with invar) - DNA3
- Staff reading resolution 0.01mm for DNA3
- Staff reading resolution 0.1mm for DNA10
- Range to Standard staff 1.8m to 110m
- Range to Invar staff 1.8m to 60m
- Utilises GEB111 / GEB121 batts
- 6000 points internal memory
- Utilises PCMCIA card
- 24x magnifi cation www.leica-geosystems.com
36
Optical & Digital Levels
LEICA NA series levels
LG641982 - 20 x mag. NA720.
LG641983 - 24 x mag. NA724.
LG641984 - 28 x mag. NA728.
LG641985 - 30 x mag. NA730.
LEICA Runner level
PENTAX AP auto level
519216 - AP120, 20 x mag.
519218 - AP124, 24 x mag.
519217 - AP128, 28 x mag.
37 www.pentax-survey.com.au
TRIPODS
519043
- Wood / fi berglass composite
- Flat top
- H/d
519027
- RA domed top
- Aluminium
- Economy 519026
- RA fl at top
- Aluminium
- Economy
- Leica
- Aluminium
- Flat top
- H/d www.leica-geosystems.com
38
519032
- Wooden
- Flat top
- H/D
General Products
GST120-9 GST20-9
LG667301
- Leica
- Wooden
- Flat top
- Self locking
- H/d www.crkennedy.com.au
39
LG394752
- Leica
- Flat top
- Wooden
- H/d
LEICA DIGICAT
DIGICAT 100 & 200 services locator
- Used for detection
and localisation of
underground services,
including cables,
metallic pipes and
connected equipment.
- To a depth of 3m.
- Visual and audio
indicators.
- 40 hour battery life.
- under 4kg in weight.
- Leica Geosystems
quality.
DIGICAT 200
- As per Digicat 100 with an additional depth indication to pipes.
DIGITRACE 30/50/80
Feed the DIGITRACE up any material pipe, with the Digitex 8/33 connected, to enable very accurate tracing of non-metallic pipes.
Leica
Digicat
DIGITEX 8/33
Create a unique signal with the
DIGITEX 8/33 for the Digicat to follow - the 8/33 is connected to the Digitrace or to a pipe via alligator clips.This combination offers highly accurate results.
Your ideal partner for safe, fast & easy location of underground services www.leica-geosystems.com
40
General Products
PENTAX BINOCULARS
UCF Series:
Pentax original dual-axis eye-distance adjustment system
High-grade BaK4 glass prisms
Encased in protective rubber housing
UCF 10X24G. UCF 16X24 G.
Pentax FB Series:
The smallest and lightest binoculars in the range. Ultra compact and fashionably designed housing.
Perfect for the theater, sports and everyday use.
Pentax Papilio
Named from the Latin word for butterfl y
High-refraction BaK4 glass prisms
Super minimum focusing distance of 1.6 feet
Long 15 mm eye relief, & protective rubber housing
Papilio 6.5X21. Papilio 8.5X21.
Pentax Jupiters:
Entry level binoculars
Compact, ergonomic body design
Short minimum focusing distance (of 3 m.)
8X20 MCF II. 10X20 MCF II.
Pentax. Make no mistake.
www.crkennedy.com.au
41
TAJIMA ACCESSORIES
6600080
5.0 m tape
6100055
6100052
Cutter knife
6600019
450 G magnetic plumb bob
7.0 m tape
6100056
G-lock 7.5m tape
Carry
bag
519130
TR5000
Measuring wheel
6600010
42
General Products
Slant 100
Angle guage
30m Fiber glass - 6400030
50m Fiber glass
6400032
6600060
10m Fiber glass pocket tape
6500003
100m
Fiber glass
6400034
With end hook
6500007
20m Fiber glass pocket tape
10m Steel pocket tape
6300005
30m Plastic coated steel
6300031
With end hook
50m Plastic coated steel 6300032
6300006
20m Steel pocket tape
100m Plastic rope
100m Steel tape
With end hook
6300037
6600015 www.crkennedy.com.au
43
GENERAL PRODUCTS
Scalemaster 2 Map measurer
7290459
Tamaya - Planix 10s
Planimeter
Tramex concrete
Moisture Encounter
7090008
08206964
Tamaya Planix 7
Planimeter
Tramex wood
Encounter
08206962
Tramex Survey
Encounter
Tamaya Super Beta
Planimeter
08206963
Tramex Moisture
Encounter
7090007
44
General Products
0 to 12m range
7090006
HP 33s
Scientifi c Calculator
7310598
Rabone
Ultra sonic
measurer
Sonin - Ultra sonic measurer HP 48GII
graphing calculator
7310527
0 to 18m - 7090075
HP 49G+
45
- 800 yard range
- 7 x mag.
- LED display
- Carry case
- 2 year warranty www.crkennedy.com.au
GENERAL PRODUCTS
Field bags
7090418
7090426
wheel
519090
Flagging tape 7090481
Gammon
reel l/d
526001
Top
580035
7090427
519098
Steel
Paint 7090332
Tip
580030
bob
580010
519097
Plastic
Staff bubbles
46
General Products
Double optical sq.
Single optical sq.
CST Magna Trak
- Ideal for ferous
metal detection
underground.
- Rio
- Survey pins
519504 519503
7090723
7090719
7090720
7090722
20mm
40mm
55mm
8.0m tape
25mm wide
80mm
7230064
Cadastral 75 x 75 x 450mm
Poly Pegs Australia
Polypropolyne survey pegs.
Cadastral 75 x 75 x 350mm
Red: WA. White: QLD.
Cadastral 50 x 50 x 350mm
VIC. QLD. SA. WA. NT. TAS.
Engineering
50 x 50 x210mm
Set Out Peg
Standard
* Lot numbers can be stamped
on each peg.
* Includes a centering point to
accept a nail or metal tag.
* UV resistant.
* Heat resistant & non
infl ammable.
* Impervious to white ants.
* Designed to be easily driven
into various soil types.
* Engineered to suit state
specifi cations.
* Recyclable and available in
a range of colours.
Colours: Green, Yellow, Orange.
www.crkennedy.com.au
47
GENERAL PRODUCTS
Silva
clino-compass
7090278
Rubber cover
7090250
Red & whites
7090151 module 519752
CM 360 Clino
7090271
Maruzen marker
7290550
Sm360 compass
7090270
Clino-height fi nder 7090249
Crayons
7090331
Model 80 compass 7090272
48
7091111
Tribrach tester
519318
General Products
Thommen classic altimeter
Pentax
Pole
7090274
53LD500
Line generator
* Self levelling.
* High visibility laser lines.
* Horizontal & vertical.
* Various mounting options.
5112162
LD500
Machine
Receiver
(magnetic or bracket) f heavy/duty (shown) 7130050 f light duty 7130053
49
Fiberglass staf 2m/ 2 piece range pole www.crkennedy.com.au
3m & 5m 5mm metric staf
CR Kennedy. The services & benefi ts
Over many years, C.R. Kennedy has aquired the expertise of the leaders in the surveying fi eld. We have built a surveyor based service business with a full range of the best products in the world, combined with the best support people in the country.
This has been achieved by combining the experience of our former divisions - SIMAR in Victoria, INSUCO in South Australia,
Precision Instruments in NSW and
Precision Surveying Instruments in Queensland - with the skill and knowledge gained by Leica
Geosystems and its employees in
Australia.
Nation wide active assistance
With C.R. Kennedy & Co., comprehensive customer support is only a quick phone call away. C.R.Kennedy’s highly trained and experienced survey systems specialists ensure pleasant and effi cient co-operation.
Technical services
Our service centers are well able to provide fast turnaround times combined with reliable repairs.
• Technicians are trained regularly by expert factory instructors.
• Computer aided diagnostics locate problems fast.
• Warranty period on repairs.
• Software and hardware upgrades.
• Overhauls, yearly services, calibrations.
50
51
Service contracts
Give yourself and your instrument special attention. Service contracts reduce your instrument costs, promote instrument longevity and ensure the best possible performance.
Typical contracts may include the following-
* Extension of warranty including parts and labour
for remedial services.
* Priority service and repairs.
* Software upgrade free of charge.
* Loan units made available free of charge
(pending availability).
* Annual service including test-protocol,
Service Declaration.
* Flexible invoice periods to suit your
business requirements.
* Fixed cost per annum, allowing
easy budgeting of service costs.
The team...
The combination of sales and service groups from both C.R.
Kennedy & Leica Geosystems has resulted in the formation of an organisation which is unparalleled in scale and ability to service.
One in every two dollars spent in the Australian Survey & Construction
Instrumentation Market is spent with
C.R.Kennedy and Company Pty Ltd.
This remarkable achievement has been possible with the superior product of Leica
Geosystems and the dedication, loyalty and commitment of our staff to providing the highest
possible level of service.
We thank our customers for their business and support, which has made this possible.
Malcolm Kennedy. Managing Director www.crkennedy.com.au
www.crkennedy.com.au
VICTORIA
663 Chapel St
South Yarra 3141
Tel: (03) 9823 1533
Fax: (03) 9827 7248
Email: [email protected]
NEW SOUTH WALES
108 Miller St
Pyrmont 2009
Tel: (02) 9518 9700
Fax: (02) 9518 9711
Email: [email protected]
QUEENSLAND
80 Kingsford Smith Drive
Albion 4010
Tel: (07) 3862 6210
Fax: (07) 3862 6212
Email: [email protected]
QUEENSLAND
Mackay
Tel: (07) 4957 6733
Fax: (07) 4957 6755
Email: [email protected]
SOUTH AUSTRALIA
261 Sturt Street
Adelaide 5000
Tel: (08) 8410 1366
Fax: (08) 8410 1370
Email: [email protected]
WESTERN AUSTRALIA
17-19 Oxford Close
West Leederville 6007
Tel: (08) 9489 8500
Fax: (08) 9489 8501
Email: [email protected]
This catalogue has been compiled and designed by Mark Hickey of CR Kennedy
& Company Pty Ltd ABN 50 008 458 884. The majority of the digital images displayed have been taken using a Pentax Optio digital camera. Thanks to those manufacturers who provided assistance with images and to Samantha Wijaya for assistance with photography.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project