Samsung MAX-VJ550 Instruction manual

THREE-CD CHANGER
VIDEO-CD
MINI-COMPACT SYSTEM
VCD/MP3-CD/CD-R/RW
PLAYBACK
MAX-VJ550
Instruction Manual
Downloaded From Disc-Player.com Samsung Manuals
Safety Warnings
Contents
Thank you for buying this
SAMSUNG mini-compact system.
Please take time to read these instructions.
They will allow you to operate your
system with ease and take full advantage
of its features.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
SAFETY WARNINGS .................................................................................................................................................................................. 2
INSTALLING YOUR MINI-COMPACT SYSTEM
Front Panel View ...................................................................................................................................................................................... 4
Display Window........................................................................................................................................................................................ 4
Remote Control ........................................................................................................................................................................................ 5
Rear Panel View ...................................................................................................................................................................................... 6
Where to Install Your Mini-Compact System............................................................................................................................................ 6
Connecting your System to the Power Supply ........................................................................................................................................ 7
Inserting Remote Control Batteries .......................................................................................................................................................... 7
Connecting to an External Source ............................................................................................................................................................ 7
Connecting the Loudspeakers ................................................................................................................................................................ 8
Connecting the AM (MW/LW) Aerial ........................................................................................................................................................ 8
Connecting the FM Aerial ........................................................................................................................................................................ 8
Connecting the SW Aerial (option)............................................................................................................................................................ 9
Connecting to the Equipment .................................................................................................................................................................. 9
Demo/Dimmer function ............................................................................................................................................................................ 9
Setting the Clock ...................................................................................................................................................................................... 10
CD/MP3-CD-PLAYER
Loading and Changing Compact Discs.................................................................................................................................................... 10
To reply the CD/MP3-CD ........................................................................................................................................................................ 11
Selecting a CD in the Disc changer ........................................................................................................................................................ 11
MP3-CD Playback .................................................................................................................................................................................... 12
Selecting a Track...................................................................................................................................................................................... 12
Repeating One or All Tracks on the Compact Discs................................................................................................................................ 13
Function to skip through 10 track at a time ............................................................................................................................................ 13
Last Memory Function ............................................................................................................................................................................ 13
Programming the Order of Playback........................................................................................................................................................ 14
Checking or Changing Programmed Tracks ............................................................................................................................................ 14
Video CD Player Playback ...................................................................................................................................................................... 15
Search Functions .................................................................................................................................................................................... 15
Time Search Functions .......................................................................................................................................................................... 15
When adjusting play speed .................................................................................................................................................................... 16
NTSC/PAL Selection Method .................................................................................................................................................................. 16
Sound Select Function ............................................................................................................................................................................ 16
KEY CONTROL Function ........................................................................................................................................................................ 16
VCD View Function .................................................................................................................................................................................. 17
ZOOM Function........................................................................................................................................................................................ 17
Symbols
Press
Push
TUNER
Searching for and Storing the Radio Stations ........................................................................................................................................ 18
Selecting a Stored Station........................................................................................................................................................................ 19
Improving Radio Reception...................................................................................................................................................................... 19
TAPE DECK
Listening to a Cassette ............................................................................................................................................................................ 20
CD Synchro Record Feature.................................................................................................................................................................... 20
Recording a Compact Disc ...................................................................................................................................................................... 20
Recording a Radio Program .................................................................................................................................................................... 21
Copying a Cassette (Dubbing) ................................................................................................................................................................ 21
Selecting the Cassette Playback Mode (DECK 2 only) .......................................................................................................................... 21
Tape counter ............................................................................................................................................................................................ 21
OTHER FUNCTIONS
Timer Function ........................................................................................................................................................................................ 22
Cancelling the Timer ................................................................................................................................................................................ 22
Mute Function .......................................................................................................................................................................................... 23
Selecting Sound Mode ............................................................................................................................................................................ 23
How to adjust USER EQ?(option)............................................................................................................................................................ 23
Power Sound Function ............................................................................................................................................................................ 23
S.BASS Function...................................................................................................................................................................................... 24
Setting the System to Switch off Automatically ........................................................................................................................................ 24
Connecting Headphones.......................................................................................................................................................................... 24
Microphone Function(option).................................................................................................................................................................... 24
Important
Note
RECOMMENDATIONS FOR USE
Safety Precautions .................................................................................................................................................................................. 25
Cleaning Your Mini-Compact System ...................................................................................................................................................... 25
Precautions When Using Compact Discs ................................................................................................................................................ 26
Precautions When Using Audio Cassettes .............................................................................................................................................. 26
Before Contacting the After-Sales Service .............................................................................................................................................. 26
Technical Specifications .......................................................................................................................................................................... 27
2
Downloaded From Disc-Player.com Samsung Manuals
3
GB
Front Panel View
Remote Control
GB
30
28
29
1.
2.
3.
27
26
25
1
24
2
3
23
22
4
5
21
20
19
6
7
8
9
10
18
17
16
15
11
12
13
14
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
STANDBY/ON
DEMO/DIMMER
SEARCH FUNCTION BUTTONS
OR STOP OR TUNING MODE
MIC LEVEL(option)
MIC (option)
PHONES
RECORD/PAUSE
COUNTER RESET
DUBBING
TAPE 1/2
CD SYNCHRO
REVERSE MODE
MONO/STEREO
TIMER/CLOCK
TIMER ON/OFF
TUNER MEMORY
AI SLEEP
CD PROGRAM
ENTER
MULTI JOG
SUPER BASS
SOUND MODE
WINDOW DISPLAY
VOLUME+,POWER SOUND
COMPACT DISC COMPARTMENT
CD Open/Close
DISC CHANGE
DISC SELECTION BUTTONS
FUNCTION SELECTION BUTTONS
Display Window
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
FM MODE (STEREO)
Volume
POWER SOUND
SUPER BASS
TAPE 1/2
TAPE RUNNING DIRECTOR
TAPE REVERSE MODE
PLAYING DISC NUMBER
MAIN DISPLAY(FUNCTION,FREQUENCY,TIME,ETC.)
CD SYNCHRO RECORDING
RECORDING
PBC
TUNER FREQUENCY UNIT
CLOCK
AI SLEEP OR SLEEP
CD PLAYING DISC MODE OR CD
REPEAT MODE
CD PROGRAM OR TUNER MEMORY
TO PROGRAM
TUNER PRESET
CD PROGRAM AND TUNER PRESET
NUMBER
4
Downloaded From Disc-Player.com Samsung Manuals
1
28
2
4
27
26
5
6
7
8
25
24
23
22
9
10
12
21
20
19
18
17
13
14
16
15
3
11
1. STANDBY/ON
2. Digit Buttons/Direction Buttons
3. TUNER(BAND)
4. TAPE Rewind/TAPE Fast-Forward
5. TAPE Stop
6. Key Control
7. Disc Number Skip
8. Key Control
9. SOUND MODE
10. TIME SEARCH(Last Memory)
11. Track Previous
12. CD Stop
13. SOUND
14. VCD Slow Play
15. Return
16. Disc View
17. Tuning Mode
18. Track Next
19. Disc Play/Pause
20. CD Repeat
21. AI Sleep
22. Volume Decrease
23. FM Mono/Stereo/VCD zoom
24. Volume increase
25. TAPE Play
26. +10/0
27. TAPE 1/2
28. Mute
5
Connecting your System to the
Power Supply
Rear Panel View
Before plugging your system into a main socket, you must check
the voltage.
1
Check the position of the voltage selector on the rear of the system
(OPTIONAL).
2
3
Plug the main lead into an appropriate socket.
2
GB
The auxiliary input can be used to take advantage of the
sound quality of your mini-compact system when listening to
other sources.
Examples: A television
A video disc player
A Hi-Fi stereo video cassette recorder
Press the Standby/ON button to switch your mini-compact system .
To connect to the external source, the source must have an
audio output. In addition, you need an RCA connection cable.
1
8
7
1
Connecting to an External Source
2
6
Set the system to standby mode and disconnect it and the external
source from the main socket.
Connect the audio cable to the rear of the mini-compact system.
Connect the...
To the connector marked...
Red jack
White jack
R (right)
L (left)
For optimum sound quality, do not invert the right and left
channels.
5
3
4
1. Video (DISC) Output
2. Audio (DISC) Output
3. SW Aerial Connector Terminals (Option)
Inserting Remote Control Batteries
Insert or replace remote control batteries when you:
Purchase the mini-compact system
Find that the remote control is no longer operating correctly
3
Plug the system back into the main socket and press
STANDBY/ON to switch it on.
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
5
6
Switch the external source on.
Adjust the volume and balance as required:
Volume
Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.
4. Voltage Selector(Option)
5. Loudspeaker Connector Terminals
6. AUX-Input
1
Place your thumb on the position marked
on the battery
compartment cover (rear of the remote control) and push the cover in
the direction of the arrow.
2
Insert two AAA, LR03 or equivalent batteries, taking care to respect
the polarities:
+ on the battery against + in the battery compartment
– on the battery against – in the battery compartment
7. AM Aerial Connector Terminals
8. FM Aerial Connector Terminal
Where to Install Your Mini-Compact System
3
To take full advantage of your new mini-compact system, follow
these installation instructions before connecting the unit.
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 6 inches (15 cm) on the
sides and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the compact disc
compartment easily.
Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.
6
Downloaded From Disc-Player.com Samsung Manuals
Replace the cover by sliding it back until it clicks into position.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
3
4
7
Connecting the Loudspeakers
The loudspeaker connector terminals are located on the rear
of the system.
There are four terminals on the system:
Two for the left speaker (marked L)
Two for the right speaker (marked R)
To achieve the correct sound quality, connect the:
Red wire to the + terminals
Black wire to the – terminals
1
2
3
Connecting the AM (MW)/LW Aerial
Connecting the SW Aerial (option)
DEMO/DIMMER function
GB
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM aerial connector terminals are located on the rear of the system
and are marked AM .
To avoid noise interference, check that the loudspeaker wires do not
run close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
How to connect a WIRE TYPE aerial.
Spread the SW aerial out and attach the ends to a wall, in the position
providing the best reception.
If reception is poor (e.g. distance from transmitter too great, walls blocking
the radio waves, etc.), install an outdoor aerial.
All functions available on the system can be viewed on the
display and the display's brightness can be switched between
"on" and "off".
1
Press the DEMO/DIMMER button.
Result: All functions available on the system appear on the front
panel display.
Each of these are explained in detail in this guide. Please refer to
the relevant section.
Press and hold the terminal tab.
Insert the speaker cord.
Release the finger.
2
Press the DEMO/DIMMER button again.
Result: The Dimmer function is selected and the display darkens.
3
Press the DEMO/DIMMER button once again to brighten the front
panel display.
A display brightness control can only be performed while the
system power is on.
L
Connecting to the Equipment
R
Using the Audio Cord, Connect the Audio Output Terminals (Left, Right)
of the System with the Audio Input Terminals (Left, Right) of the Video
Input Cassette Recorder, so as to Record VCD.
Using the Video Cord, Connect the Video Output Terminal of the system
with the Video Input Terminal of TV.
Turn on the TV and Select the Video mode by pressing the TV/VIDEO
SELECT button to the VIDEO Position.
Please Pay Attention not to Connect the Audio Output Terminals (left,
right) of the System with the Audio Input Terminal of TV.
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket
(75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 18 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear
of the system using a 75Ω coaxial cable (not supplied).
TV
AMPLIFIER
VIDEO INPUT
AUDIO INPUT
R
8
Downloaded From Disc-Player.com Samsung Manuals
L
9
Loading and Changing Compact
Discs
Setting the Clock
To replay the CD/MP3
Selecting a CD in the Disc changer
GB
Your system is equipped with a clock which allows you to
turn your system on or off automatically.
You should set the clock:
When you first purchase the mini-compact system
After a power failure
After unplugging the unit
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and
closing the compartment.
Switch the system on by pressing STANDBY/ON.
3
Press ENTER.
Result: The hour flashes.
4
Press TIMER/CLOCK twice.
Result: CLOCK is displayed.
To...
Turn the MULTI JOG knob to the...
Increase the hours
Decrease the hours
Right
Left
5
When the correct hour is displayed, press ENTER.
Result: The minutes flash.
6
To...
Turn the MULTI JOG knob to the...
Increase the minutes
Decrease the minutes
Right
Left
7
At least more than one CD should be inserted for playbacks.
Always treat your compact discs with care; refer, if necessary, to
the section entitled “Precautions When Using Compact Discs” on
page 26 .
1
Switch the system on by pressing STANDBY/ON.
2
Press the OPEN/CLOSE( ) button on the front panel.
Result: The compartment opens.
3
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted
in the holder before closing the compartment.
4
If you wish to load a third compact disc, press the DISC CHANGE
button on the front panel (or DISC SKIP on the remote control).
Result: The carrousel rotates by 120°.
5
Close the compartment by pressing the OPEN/CLOSE( ) button
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
When the correct time is displayed, press ENTER.
Result: The clock starts and is displayed, even when the system is
in standby mode.
You can display the time, even when you are using another
function, by pressing TIMER/CLOCK once.
You can also use
/
buttons on the panel front or
/
on the remote control to instead of MULTI JOG knob in
step 4, 6.
Do not use CDs of irregular shapes like heart or octagon shapes.
The performance of the player may be degraded.
Never press down or place objects on the carrousel.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
2
This is a player that enables the playback of audio CD, CD-R,
CD-RW , MP3-CD , VCD but does not possess the function that
saves MP3 files.
To play...
Press...
Disc 1
VCD/CD (
) or Disc 1
Disc 2
Disc 2
Disc 3
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not
using it, to prevent dust from entering.
1
5
4
1
2
3
4
) of the main unit to select the CD function.
Insert more than one CD or a MP3-CD.
Press the VCD/CD(
) button on the front panel or the
ton of the remote control.
To select a specific disc, press the corresponding DISC (1, 2, 3) button on the front panel or DISC SKIP on the remote control, until the
required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
If you wish to play the current disc only, press CD REPEAT on
the front panel one or more times, until 1 CD is displayed.
Press the STANDBY/ON button to switch on the power.
Press the VCD/CD(
The CD function is automatically selected when Disc Skip is
pushed.
If you use the DISC (1, 2, 3) function when listening to the radio
or to a tape, the system switches automatically to the CD mode.
If the disc selected is not loaded, the next disc is played
automatically.
but-
If there is more than one CD or an MP3-CD inserted,
replays are then processed in order.
Your CD Player will take a few moments to scan through
all the tracks recorded on a particular MP3-CD.
5
Adjust the volume according to needs with the following procedures.
Turn the VOLUME control on the front panel
or
Press the VOLUME + or – button on the remote control.
The volume level can be adjust in 31 steps(VOL MIN,VOL
1- VOL 29,and VOL MAX).
6
If it is desired to stop while the playback is processing, press the
VCD/CD(
) button.
Press the VCD/CD(
again.
7
To stop playback, press the
) button once again to playback
button.
A new disc may be inserted in the remaining two compartments excluding the CD which is being played back.
Press the DISC CHANGER button to open the CD tray.
The revolving part does not turn during playbacks.
If there is not even one CD inserted in the CD tray, it is indicated as “NO DISC”.
2,5
1
2,4,6
4,6
4,6
5
4,6
7
1
5
2
3,5,7
10
Downloaded From Disc-Player.com Samsung Manuals
11
What is MP3?
MP3 means MPEG1 Layer 3, the global standard for audio
signal compression technology. It uses digital compression
technology to compress original sound data by up to 12 times
without sound quality degradation.
2
You can see the following information of Disc on the TV.
MP3 TOTAL : 150
FOLDER: ROOT
PAGE : 02/02
DIR 9999 -> DIR
DIR 9999
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
9999
File Compatibility
The unit will playback files created in MP3 format
(Mpeg1.Layer3) with *.mp3 as their extension.
Playback will be impossible for the file of MP2 or
22KHz.
How many MP3 files can a CD-R or CD-RW disc record?
1
Select the title by pressing
then press
In the case of an original CD-R(Recordable) recorded in
audio CD format, CD-RW(Rewritable) and editing by
the user, playback is processed on the respective
completed status. (The player may not be played back
according to the characteristics of the CD or recorded
status.)
The CD-RW is comparably less reflexive than CD which
causes more time delay to read.
MP3-CD PLAYBACK
and
then press
and
To repeat...
buttons and
button to enter the title.
Select the song by pressing
The current track indefinitely
The selected disc
buttons and
Function to skip through 10
tracks at a time
Press the +10 button briefly while playing back a
CD and MP3-CD. The track 10 tracks after the current
one will then be played back.
Press CD REPEAT on the Remote
control once or more times
until...
REPEAT 1 is displayed
REPEAT 1 CD is displayed
Example: If you want to select track 43 during playback of track
5, press the +10 button four times, and then press
the
button three times .
5 ➝10➝ 20 ➝ 30 ➝ 40 ➝ 41 ➝ 42 ➝ 43
button to enjoy the music.
2
MP3 TOTAL : 150
FOLDER: DIR 999
PAGE : 01/02
01
02
03
04
05
06
07
08
The maximum capacity of one CD-R or CD-RW disc is
680MB.
Normally, one MP3 file has a capacity of 4MB, therefore
approximately 170 files can be recorded on a single disc.
Regarding the playback of CD-R/RW
Repeating One or All Tracks
on the Compact Discs
When you wish to stop the Repeat function, press CD REPEAT until
1 CD is displayed, or press
.
Selecting a Track
1,2
You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the...
Turn the MULTI JOG knob...
Next track
Current track
Previous track
Track of your choice
One notch to the right
One notch to the left
Two notches to the left
The appropriate number of
notches to the right or to the left
2
You can also use the
and
buttons on the front panel, or
the
and
buttons on the remote control to select a track.
HOW TO PLAYBACK MP3-CD directly
1
2
After inserting MP3-CD in the Set, Press
ber button after Reading.
button or Num-
You can see the information of Disc on the TV.
MP3 TOTAL : 150
FOLDER: DIR 999
PAGE : 01/02
01
02
03
04
05
06
07
08
Last Memory Function
When a disc playback is selected again after your CD player has been stopped , turned off, or other functions(TUNER,
TAPE, AUX), this function allows playback from the start
of the track that you last listened to.
Select the No of song on the remote control Digits button and you can enjoy
the Music.
HOW TO PLAYBACK MP3-CD on MENU MODE
1
After inserting MP3-CD in the Set, Press the “DISC VIEW” button in the stop
mode.
12
Downloaded From Disc-Player.com Samsung Manuals
13
GB
Checking or Changing Programmed
Tracks
Programming the Order of Playback
Search Functions
Video CD Player Playback
GB
You can decide:
The order of the track desired to listen
The track not desired to listen
A maximum of up to 30 order of tracks desired to listen may
be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD Repeat
function.
1
2
3
4
If the CD function is selected, stop the player by pressing
In order to playback video VIDEO-CD(‘S), make sure that your
unit is connected to your TV set.
1
2
This unit is designed for playback of video CD(‘S), version 1.1 and 2.0.
Only with version 2.0, is it possible to call up the on screen menu
function. This unit will not play back any other video VIDEO-CD(‘S)
other than 1.1 and 2.0 versions.
Press
once if you have started listening to the selection.
Press PROGRAM.
Result: The following indications are displayed:
(C = Check, 01=Program No, I = Disc No, – – – – = Track No on the disc)
If you have already programmed 30 tracks, C is displayed
instead of P when you press PROGRAM.
Load the selected CDs.
Press PROGRAM.
Result: The following indications are displayed:
3
Press PROGRAM again.
Result: The first track selected is displayed, together with the letter C (Change).
(01 = Program no., I = Disc no., – – – – = Track no. on the disc)
4
Press PROGRAM one or more times until the track to be changed is displayed.
5
6
Press
7
Press VCD/CD (
) to start listening to the selection.
Result: The first track selected is played.
Select the required track by turning the MULTI JOG knob:
To the left to move back through the tracks
To the right to move forward through the tracks
5
Press PROGRAM to confirm your selection.
Result: The selection is stored and
6
7
8
To select other tracks, repeat Steps 4 to 6.
9
.
You can check or change your selection of tracks at any time.
Press VCD/CD (
is displayed.
and
1
2
3
4
5
To...
Turn the MULTI JOG knob...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
One notch to the left
Two notches to the left
One notch to the right
The appropriate number of
notches to the right or to the left
If you open the compartment, the selection is cancelled.
You can also use the
/
buttons to select the required
tracks in step 4, 8.
In the video CD version 1.1, where the disc’s contents are over 15
minutes long, you can scan up or down by intervals of five minutes.
Load a video-CD(’S) with the label facing upwards in the tray.
Press the OPEN/CLOSE (
) button again to close the CD tray.
3
In the SKIP/SEARCH or SCAN mode, the sound can only be partially
heard and the picture scenes will change sporadically, until the required
passage has been found.
The search speed FF changes as follows X1, X2, X3, X4 speed.
To return to the previous menu, press the RETURN button on the
Remote control or ENTER button on the front panel .
When playing a video-CD(‘S) version 2.0, reading time on the
display may take longer, depending on the disc’s contents.
Press
button on the remote control to receive a still picture.
Result: Pause is displayed, a still picture appears and the sound is
muted.
7
8
To return to normal playback, press VCD/CD(
Press the Stop (
Press...
Result: The picture is still, and the disc’s contents are forwarded or
reversed by 5 minute intervals. Playback then resumes from
this new position.
) button.
6
To...
Scan forwards by 5 minute intervals
Scan backwards by 5 minute intervals
To playback:
) button.
) button to stop playback.
Please make sure that the VIDEO-CD(‘S) to be played is not
flawed optically, as this may cause a distorted sound or the unit to
malfunction.
Time Search Function
5
2,4
1
7
1
1
2
3
Press the TIME SEARCH button.
Set a desired time by pressing the DIGIT buttons.
Press the PLAY (
) button.
5,6,7
7
5
Please use this function for reproducing a desired track in a
certain time of playback.
5
1
2,3,4,6
1,9
Release the SKIP/SEARCH buttons when the desired passage has
been found.
(This function is available only during the playback of a CD/VCD)
7
5
Press and hold down...
Press the OPEN/CLOSE ( ) button on the unit, to open the CD tray.
Result: “OPEN” is displayed and CD tray slides open.
are displayed on the TV screen. Press the
button and the
menu is displayed on the TV screen.
Select a number from the menu using Digits button on the remote
When selecting the tracks of numbers larger than 3 digit figures (figures
from the number 100), for MP3-CD please use the Digit buttons.
To...
Scan forwards
Scan backwards
In version 1.1, press the
button for direct access to the film,
as there is no menu-on-screen.
In version 2.0, load a video CD, “Video CD2.0”, and “MENU ON”
or turn MULTI JOG to select a different track.
Press PROGRAM to confirm your change.
To cancel the selection, press
.
Once if the compact disc player is stopped,twice the selection is
canceled.
Result: PRGM is no longer displayed.
1
2
Turn on the STANDBY/ON switch and set the VCD mode.
control or MULTI JOG knob and press the VCD/CD(
) to listen to the track selection in the order programmed.
You can find a certain passage faster during playback.
This function is possible in CD or VCD Ver 1.1 or Ver 2.0
menu off mode.
2
5
8
1
3
3,5
4,8
14
Downloaded From Disc-Player.com Samsung Manuals
15
When adjusting play speed
Sound Selection Function
VCD View function
GB
Turn on the TV and set video mode.
Press the Slow button on the remote controller when the play function is on.
Voices do not come out when the Slow button is pressed.
Slow playing is 1/2, 1/4, 1/8 the normal playing speed.
With this function, you can playback video CD’s that provide
2-channel tone(bilingual) in the original language. Similarly,
with karaoke video CD’s, you can select between the channel
for music without vocals for sing-along purpose, or the channel complete with music and vocals.
This function can be used conveniently to search a desired
track in a VCD. This function is possible in CD or VCD Ver 1.1
or Ver 2.0menu off mode.
When you want to select a track
Press the DISC VIEW button in the stop state.
Result: "TRACK VIEW" menu is displayed on the screen.
The screen is split into 9 with each screen picture being
reproduced for 8 seconds.
– Press NEXT(
) button to see the rest tracks.
– Press PREV.(
) button to see the previous tracks.
2
Press the (
) button or select a track by pressing the Digits buttons.
Result: The picture that you selected is displayed in full screen.
During playback, press the SOUND button on the remote control.
Result: Each time the SOUND button is pressed, the following appears in
the display and on the TV screen:
To return to normal operation.
Press the VCD/CD (
) button.
When the slow mode or frame mode is selected a disc will only forward
operation.
Lch MONO
( L-CH )
Rch MONO
( R-CH )
STEREO
L-CH : Only the left channel (instrumental parts) is played back
through both the right and left speakers.
R-CH : Only the right channel (vocal parts) is played back through
both the right and left speakers.
STEREO : Cancels the Multiplex Sound (normal stereo playback
resumes).
INDEX VIEW
1
3
When you wish to stop the DISC VIEW function, press
3
1
button.
2
1
2
3
4
5
6
7
8
9
When using more than 10 tracks :
Press the Digits and +10/0 button, select the desired track number
(Reference page 13).
– Press NEXT(
) button to see the next track.
– Press PREV.(
) button to see the previous track.
You can select between listening to the tone from the left channel,
the right channel or both channels.
ZOOM Function
1
Press ZOOM button during playback.
Result: The picture being reproduced will be enlarged twice as large
as the previous one.
2
Press ZOOM button in the state of twice times sized zoom.
Result: The picture will return to the initial size.
TRACK VIEW
2
During operating the zoom function, if you want to move the
picture upward/downward/leftward/rightward, please press the
respective Digits button (2,4,6,8).
KEY CONTROL Function
NTSC/PAL Selection Method
According to a DISC or TV, Press the REC/Pause button on the front
panel.
Set the system to standby(power off) mode, press the REC/Pause button
on the front panel.
Result: Each time the REC/Pause button is pressed, the following appears
in the display:
NTSC
1,3
2
1,3
This function can work only at VCD mode when microphone is connected.
3
Press the Key Control button to adjust the key to your voice. (the 15 step
key control you can select )
Result: Each time the Key Control #, b button is pressed, the following
appears on the TV screen:
1
2
3
4
5
6
7
8
9
1
b : Low-Pitched Key
# : High-Pitched Key
When you want to select an INDEX
PAL
This function is convenient to search a desired scene as it
displays a track reproduced by time.
1
2
3
16
Downloaded From Disc-Player.com Samsung Manuals
Reproduce the pictures by pressing the (
) button.
Press the DISC VIEW button.
Result: "INDEX VIEW" menu is displayed on the screen.
The screen is split into 9 with each screen picture being
reproduced for 8 seconds.
1,2
Reproduce the pictures by pressing a desired Digits button.
Result: The one of nine picture is displayed in full screen.
17
Searching for and Storing the Radio
Stations
Selecting a Stored Station
Improving Radio Reception
GB
You can store up to:
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
1
2
3
4
15 FM stations
15 AM stations
(8 MW stations,7 LW stations )
2,3
6
1
Switch the system on by pressing STANDBY/ON.
Select the TUNER function by pressing TUNER.
Select the required frequency band by pressing TUNER (BAND)
again on the front panel or TUNER (BAND) on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW(Option)
Long Wave
SW1/SW2(Option)
Short Wave
To search for a
station...
Press TUNING MODE
Manually
Once or more times until MANUAL
is displayed.
Once or more times until AUTO is
displayed.
Automatically
5
You can listen to a stored radio station as follows:
or
5,8
5,8
7
8
4
Press the TUNING MODE button on the front panel of the unit, or the
TUNING MODE button on the remote control until “PRESET” is
displayed.
4
7
8
5
Turning MULTI JOG on the front panel left or right until the desired
station is found or press
/
to select the desired station.
or
Select the desired station by pressing the
or
button on the remote control.
Result: The desired station is now received.
Select the TUNER function by pressing TUNER on remote control.
Select the required frequency band by pressing TUNER (BAND) on
the remote control or TUNER (BAND) again on the front panel.
1
Adjust the volume by:
Turning the VOLUME knob on the front panel
or
Pressing the VOLUME + or – buttons on the remote control
If reception from a specific FM radio station is poor, press MONO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
2,3
3
Select the station to be stored by:
Turning the MULTI JOG knob to the right or to the left to increase
or decrease the frequency respectively
or
Pressing
or
on the remote control
5
4
6
6
5,8
5,8
1
4
Select the FM stereo or mono mode by pressing MONO/ST.
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press TUNER/MEMORY.
Result: The PRGM is displayed for a few seconds.
b Press
or
to assign a program number .
c Press TUNER/MEMORY to store the radio station.
Result: PRGM is no longer flashed and the station is stored.
9
Switch the system on by pressing STANDBY/ON.
5
To scroll through the frequencies faster when searching
manually, hold down the
or
buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
1
2
3
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
In Tuner mode
3
In manual tuning mode, you can use MULTI JOG or
/
button on the panel front to manual search a radio station.
During Tuner auto searching, press
button to stop auto
searching.
In Preset tuning mode, you can use MULTI JOG or
/
button on the panel front to search a stored radio station.
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
18
Downloaded From Disc-Player.com Samsung Manuals
5
5
4
19
Listening to a Cassette
1
2
3
4
5
6
7
8
9
CD Synchro Record Feature
Always treat your cassettes with care; refer, if necessary, to
the section entitled “Precautions When Using Audio Cassettes”
on page 26.
Switch the system on by pressing the STANDBY/ON button.
Select the TAPE function by pressing TAPE on the front panel.
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where PUSH EJECT ( ) is written.
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
If you have inserted two cassettes, press TAPE 1/2 on the front panel
or directly the TAPE 1/2 button on the remote control to select the
cassette to be played.
You can record a compact disc on a cassette in two different ways:
You can record a radio program of your choice.
Synchr onised recording
Direct recording
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on
the recording.
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
2
3
4
5
6
7
Select the CD function by pressing VCD/CD on the front panel.
Load a compact disc.
Select the required disc.
Select the required track and press CD SYNCHRO or press CD
SYNCHRO directly to start recording at the beginning of the disc.
Result: REC and SYNC are displayed and recording starts.
To stop recording, press
.
1
2
3
4
Switch the system on by pressing STANDBY/ON.
5
Press REC/PAUSE.
Result: REC is displayed in red and recording starts.
6
To stop recording, press
Insert a blank cassette in Deck 2.
One side of the selected cassette and
then stops.
Select the TUNER function by pressing TUNER.
One side of the cassette.
The other side of the cassette and then
stops.
Select the radio station that you wish to record by pressing Tuning
or
on the remote control or by press the Tuning Down or
Up on the front panel.
3
1
7
5
Press ...
To...
Press ...
Stop the playback
1
2,7
Recording a Compact Disc
The direct recording mode enables you to start recording with
any track on the compact disc.
Remote Control
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1
2
3
4
5
6
Switch your system on by pressing STANDBY/ON.
7
Press the REC/PAUSE.
Result: REC is displayed.
8
Press the
to start playing the track.
Result: The track is recorded on the cassette.
9
To stop recording, press
Copying a Cassette (Dubbing)
Select the CD function by pressing VCD/CD on the front panel.
Load the compact disc.
Select the required disc.
Select the required track on the compact disc and press
on the front
panel or
on the remote control to set the compact disc player to Pause
mode.
3,6,8
1
8
6
.
Tape Counter
You can copy a cassette from Deck 1 to Deck 2.
Normal speed dubbing in selecting Tape function mode.
You do not need to adjust the volume, as it has no effect on the
recording.
Take care not to insert the tape to be copied in Deck 2, as it will
be erased when you start recording.
Insert a blank cassette in Deck 2.
8
9
.
4 6 4
6
Main Unit
To...
Rewind the cassette
Fast-forward the cassette
Both sides of the cassette indefinitely until
you press stop.
1
DECK 1 and DECK 2
DECK 2 Only
Press...
Your mini-compact system has three cassette playback modes
which enable you to listen to both sides of a cassette
automatically.
Press REVERSE MODE until the appropriate symbol is displayed.
3
Result: The cassette starts playing.
When the cassette is stopped, select one of the following functions
as required or on the remote control.
To...
Rewind the cassette
Fast-forward the cassette
Selecting the Cassette Playback
Mode (DECK 2 Only)
When the display indicates... The mini-compact system plays back...
Switch the system on by pressing STANDBY/ON.
Insert a blank cassette in DECK 2.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
To listen to... Press ...
Side A
TAPE (
) once
Side B
TAPE (
) twice
Recording a Radio Program
1
2
3
4
Switch your system on by pressing STANDBY/ON.
Insert a blank cassette in Deck 2.
When playing a cassette in one of the cassette decks, a
counter is displayed to enable you to take note of the counter
value at the start of each track to start playback at the
beginning of the track to which you wish to listen.
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET .
Insert the tape to be copied in Deck 1.
To copy a cassette at...
Press...
Normal speed
DUBBING
Each cassette deck has a separate counter.
Result: The appropriate indications are displayed and the cassette in
Deck 1 is copied to the cassette in Deck 2.
5
To stop dubbing, press
.
1
9
5
7
4
20
Downloaded From Disc-Player.com Samsung Manuals
21
GB
Mute Function
Timer Function
GB
e timer enables you to switch the system on or off at
ecific times.
ample: You wish to wake up to music every morning.
1
2
3
4
5
6
7
8
9
How to adjust USER EQ?(option)
If the timer switch on and off times are identical, the word ERROR is
displayed.
1
2
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have 12 seconds to set the required
options. If you exceed this time, you must start again.
You can turn the sound off temporarily on your system.
Example: You wish to answer a telephone call.
Press MUTE.
To switch the sound back on , press MUTE again or the VOLUME
buttons.
1,9
You can freely set the desired tone (BASE/TREBLE) by
using the USER EQ function.
1
Press the Sound Mode button longer.
Result: "USER EQ" flashes on the display for 5 seconds.
2
Press the Tuning Mode button.
Result: TREBLE level appears on the display.
(Factory-set TREBLE level is "TRE 0 dB".)
3
Press Tuning
,
to adjust the TREBLE level (-6 to +6).
* TREBLE level can be adjusted at a 2 dB increment.
4
Press the Tuning Mode button to complete the setting.
This function is available only on the remote control.
Switch the system on by pressing STANDBY/ON.
Press TIMER/CLOCK until
TIMER is displayed.
4,5,6,7
4,5,6,7
Press ENTER.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a Set the hour by tuning the MULTI JOG knob to the right or to the
left.
b Press ENTER.
Result: The minutes flash.
c Set the minutes by tuning the MULTI JOG knob to the right or to
the left.
d Press ENTER.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a Set the hour by tuning the MULTI JOG knob to the right or to the
left.
b Press ENTER.
Result: The minutes flash.
c Set the minutes by tuning the MULTI JOG knob to the right or to
the left.
d Press ENTER.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
Press Down and Up to adjust the volume level and press
ENTER.
Result: The source to be selected is displayed.
2
To set the timer function
You may use
/
You must also...
TAPE (cassette)
Insert a recorded cassette in one of
the decks before setting the
system to standby.
TUNER (radio)
a Press ENTER.
b Select a preset station by tuning
the Multi Jog knob to the right or
to the left.
CD (compact disc)
Load one or more compact discs.
buttons to adjust in step 4, 5, 6, 7.
1
2,4
Cancelling the Timer
3
Selecting Sound Mode
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Press Timer-On/Off...
Cancel the timer
Once.
Result:
Restart the timer
Twice.
Result:
Turn the MULTI JOG knob to select the source to be played when
the system switches on.
If you select...
3,4,5,6,7,8
is no longer displayed.
is displayed again.
Your mini-compact system is equipped with a preset equalizer
that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to.
1
Turn SOUND MODE on the front panel or Press SOUND MODE on
the remote control until the required option is selected.
To obtain a...
Select...
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for classic music
PASS
POP
ROCK
CLASSIC
3
Power Sound Function
Your mini-compact system is equipped with the function
of Power Sound .
The function of Power Sound amplifies bass and improves
high key or bass twice as much for you to appreciate
powerful real sound.
1
2
Press the P.SOUND button on the front panel.
Result: Press P.SOUND button on the front panel, “P,SOUND” is
displayed.
To cancel this function, press P.SOUND button again .
1
Press ENTER to confirm the timer.
Press STANDBY/ON to set the system to standby mode.
is displayed to the top of the time, indicating that the timer
Result:
has been set. The system will switch on and off automatically
at the required times.
22
23
Downloaded From Disc-Player.com Samsung Manuals
S.BASS Function
our mini-compact system has a bass amplification function
alled SBS (Super Bass Sound). This function makes the
ound more powerful and real.
1
Press the S.BASS button on the front panel.
Result: S. BASS is displayed and “SBS ON” is displayed for a few
seconds.
2
To cancel this function, press S.BASS again, “OFF” is displayed for
a few seconds.
Connecting Headphones
You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The headphones
must have a 3.5ø jack or an appropriate adapter.
Cleaning Your Mini-Compact
System
Safety Precautions
GB
The following diagrams illustrate the precautions to be taken
when using or moving your mini-compact system.
Connect the headphones to the PHONES jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
To obtain the best possible results from your mini-compact
system, you must clean the following elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Prolonged use of headphones at a high volume may damage
your hearing.
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
Ambient operating conditions:
Ambient temperature
5°C-35°C
Humidity
10-75%
Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.
Setting the System to Switch off
Automatically
2
3
4
90 MIN
Press AI SLEEP once or more times to indicate how long the
system should continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing AI SLEEP
Change the remaining time by repeating Steps 1 and 2
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
2
Regularly clean the player with a special cleaning disc (available from
your local dealer).
1
2
Microphone Function(option)
Press AI SLEEP.
Result: playback starts and the following indications are displayed:
1
Tape Decks
hile listening to a compact disc or a cassette, you can
et the system to switch off automatically
xample: You wish to go to sleep to music.
1
Compact Disc Player
The microphone enables the user to mix in his or her vocals
to sing-along with the music or recording .
Preparation
Plug the microphone with a 6.3mm mic jack into microphone terminal.
1
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to lightning could damage the unit.
Press PUSH EJECT(
) to open the cassette deck.
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
3
Turn the MIC LEVEL knob to adjust the mic volume.
VOLUME
UP
1
Press AI SLEEP once or more times until AI SLEEP is displayed.
Result: The system will automatically switch off at the end of the disc
or cassette.
To cancel SLEEP function, press AI SLEEP once or more times until
OFF is display.
24
2
DOWN
Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment (fire
hazard) and can cause electric
shock.
Do not remove any equipment panels.
The inside of the unit
contains live components, which
cause electric shock.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.
25
Downloaded From Disc-Player.com Samsung Manuals
Precautions When Using Compact
Discs
Before Contacting the After-Sales
Service
Technical Specifications
GB
Handle your compact discs with care. Always hold them by the
edges to avoid leaving fingerprints on the shiny surface.
When you have finished playing a compact disc, always put it back
in its case.
Do not fix paper or adhesive tape to the discs and do not write on
the label.
Clean them with a special-purpose cloth.
Store your compact discs in a clean place, out of direct sunlight,
where they will not be exposed to high temperatures.
Always use compact discs marked
.
It always takes a little time to become familiar with a new appliance.
If you have any of the problems listed below, try the solutions given.
They may save you the time and inconvenience of an unnecessary
service call.
Problem
The system does not work
COMPACT
DIGITAL AUDIO
G
E
N
E
R
A
L
Precautions When Using Audio
Cassettes
Check that the tape in the cassette is sufficiently taught.
To prevent erasing a cassette that you wish to keep, remove the
safety tab on the upper edge of the cassette. To record a cassette,
where the tab has been broken, simply cover the opening with
adhesive tape.
When you have finished playing a cassette, always put it back in its
case.
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they place unnecessary strain
on the tape mechanism.
There is no sound
• The volume has been completely turned
down.
• The correct function (TUNER, CD, TAPE,
AUX) has not been selected.
• You have connected a set of earphones.
• The loudspeaker wires have been
disconnected.
• The MUTE button has been pressed.
The Timer does not work
• The timer has been stopped by pressing
TIMER ON/OFF.
In case it does not work, even the
action is taken as above.
• Press the P.SOUND button for 5 seconds in
power ‘OFF’(standby), then it is returned the
original position (RESET)
C
D
The compact disc player does not
/
start playing
M
P
3
C
D
C
A
S
S
E
T
T
E
S
R
A
D
I
O
Checks/Explanation
• The main lead is not correctly plugged into
a wall socket or the wall socket is not
switched on.
• The remote control batteries need replacing
or the polarity has not been respected.
• The STANDBY/ON button has not been
pressed.
• The CD function has not been selected.
• The disc has been inserted face down or is
either dirty or scratched.
• The laser sensor is dirty or dusty.
• The system has not been installed on a flat,
horizontal surface.
• Condensation has formed in the player;
leave the system in a warm, airy room for at
least one hour.
The MP-3 CD player cannot be
played.
• Use the PC to confirm if the extension is
*.mp3.
The tape does not start playing
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Reception is poor or no radio
stations are received at all
• The TUNER function has not been selected.
• The radio frequency has not been correctly
selected.
• The aerial has been disconnected or is not
facing the right way. Turn it until you find the
best orientation.
• You are in a building that blocks radio
waves; you must use an outside aerial.
If the above guidelines do not allow you to solve the problem, take a
note of:
The model and serial numbers, normally printed on the rear of
the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG after-sales service.
26
SAMSUNG strives to improve its products at all times. Both the design specifications and these user
instructions are thus subject to change without notice.
RADIO
LW(option)
Usable sensitivity
SW(option)
Usable sensitivity
AM (MW)
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
FM
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
60 dB
40 dB
40 dB
54 dB
4%
62 dB
10 dB
1%
COMPACT DISC PLAYER
Capacity
Frequency range
Signal/noise ratio
Distortion
Channel separation
Disc sizes
3 discs
20 Hz - 20 KHz (± 1 dB)
90 dB (at 1 KHz) with filter
0.05 % (at 1 KHz)
74 dB
Diameter: 120 or 80 mm. Thickness: 1.2 mm
TAPE DECK
Frequency range
Signal/noise ratio
Channel separation
Erasing effect
125 Hz ~ 8 KHz
40 dB
35 dB
50 dB
AMPLIFIER
Output power (6 Ω)
Channel separation
Signal/noise ratio
50 Watts/CH RMS,IEC (total harmonic distortion: 10 %)
45 dB
75 dB
GENERAL
Dimensions
270 (W) x 317 (H) x 385 (D) mm
27
Downloaded From Disc-Player.com Samsung Manuals
THIS APPLIANCE IS MANUFACTURED BY:
AH68-01410A
Downloaded From Disc-Player.com Samsung Manuals