Community TD2215 Spec sheet

TD2215

TWO-WAY, DUAL LF DRIVER FULL RANGE LOUDSPEAKER

S

PECIFICATIONS

(See notes 1 and 2)

Loudspeaker Type: 2-way, full-range

Operating Range: 45 Hz - 16 kHz

60 Hz - 16 kHz (+/- 4 dB)

Max Input Ratings:

400W continuous, 1000W Program

40 volts RMS, 89 volts momentary peak

Recommended Power Amplifier:

830W to 1200W @ 4 Ohms

Sensitivity 1W/1m:

97 dB SPL (100 Hz - 12.5 kHz 1/3 octave bands)

97 dB SPL (250 Hz - 4 kHz speech range)

Maximum Output: 123 dB SPL / 130 dB SPL (peak)

Nominal Impedance: 4 Ohms

Min Impedance: 3.2 Ohms @ 140 Hz

Nominal -6dB Beamwidth:

90° H (-11° / -53°, 2.5 kHz - 12.5 kHz)

40° V (+12° / -16°, 2.5 kHz - 12.5 kHz)

Axial Q / DI: 20.2 / 13.1, 2.5 kHz - 12.5 kHz

Crossover Frequency: 2 kHz

Recommended Signal Processing:

None

Drivers: LF (2) 15” woofer

HF (1) UC1, Ferrofluid-cooled

Driver Protection: IntelliSense™

Input Connection: (2) Locking connectors

(compatible with Speakon™ NL4)

Controls:

Enclosure:

(2) 1/4” jacks

Biamp / passive HF boost/cut

7-ply pine plywood

Enclosure Hardware: (4) Handles

Mounting / Rigging Provisions: (1) 1-3/8” stand socket

(4) 3/8-16 hanging point inserts

Grille: 16 gauge perforated steel, black powder coated

Required Accessories: None

Supplied Accessories: None

Optional Accessories:

STRAPKIT: (3) steel straps for suspending

DSC52: digital speaker controller

Mounting poles available for mounting on Tandem Subwoofer

Dimensions:

Height:

Width:

27.29” / 693.2 mm

17.275” / 438.8 mm

Depth:

Weight:

19.886”/ 505.1 mm

71 lb. / 32.2 kg

Shipping Weight: 80 lb. / 36.3 kg

1. Sensitivity: Free field pink noise measurement at 40 ft / 12.2 m at 50% power; extrapolated to 1 meter and an input voltage of 2 volts RMS.

2. Watts: All wattage figures are calculated using the rated nominal impedance.

A

PPLICATIONS

:

• Club Sound Systems

• Mobile and Installed DJ Rigs

• Regional Event Public Address

• Live Tour Reinforcement

• Theater Stage Systems

F

• Compact Full-range Design with Exceptional LF Capacity

• Two Patented Cool-Coil™ LF Speakers for High Level Low

Distortion LF Response

• IntelliSense™ Multi-Stage Protection Circuitry for Worry-Free Operation

• High Strength Construction Using Low Weight Plywood

• Total Protection Tuf Coat™ Exterior Resists Scratches and Dings

• Cup Handles, 4 Rigging Points and Stand Mount

• Matching Dual 18" and Dual 15" Subwoofers Available

D

EATURES

:

ESCRIPTION

The TD2215 is an exceptional 15" 2-way loudspeaker system delivering all of the features required by today's demanding music scene. Predictable high level low distortion operation, multistage protection circuitry, remarkable low frequency response all in a compact, well braced light weight cabinet clad in a high impact exterior finish.The TD2215 features two of Community's patented Cool-Coil™ 15" speakers, cleverly designed to draw destructive heat away from the voice coil, thus assuring extended high level operation.

Cup handles are provided for easy portability, a built in stand socket, and four rigging points further enhance the versatility of this system.

Each loudspeaker is backed by Community's Five-Year Warranty.

TD2215 Page 1 of 2

COMMUNITY PROFESSIONAL LOUDSPEAKERS

333 East 5th Street, Chester, PA USA 19013-4511 TEL (610) 876-3400 FAX (610) 874-0190

www.loudspeakers.net

Specifications subject to change without notice.

TD2215 [06-02-03]

TD2215

TWO-WAY, DUAL LF DRIVER FULL RANGE LOUDSPEAKER

Impedance Frequency Response

Beamwidth

Frequency in Hertz

20,000

Axial Q

Frequency in Hertz

20,000

D

IMENSIONS

Frequency in Hertz

20,000

Frequency in Hertz

20,000

A

RCHITECTS

A

ND

E

NGINEERS

S

PECIFICATIONS

The loudspeaker system shall be a horn-loaded, two-way, full-range design consisting of two 15" drivers and one

Ferrofluid-cooled compression driver mounted on a horn. The drivers shall be connected to a passive crossover network with a crossover frequency at 2 kHz, with driver protection using high positive current coefficient resistors. The cabinet shall be a 7-ply pine enclosure with a 16 gauge perforated steel grill. The input connections shall be two ¼" jacks, and two locking NL4 type jacks. The system shall incorporate biamp/passive and HF boost controls for flexible operation.

The enclosure shall incorporate one 1-3/8" stand socket for pole mounting and four 3/8-16 hanging point inserts. The loudspeaker system shall have an amplitude response of 60-16 kHz (+/- 4 dB SPL), an input capacity of 40V RMS, 97 dB SPL sensitivity @ 2.83V / 1 meter between 100-12.5 kHz at a nominal 4 Ohm impedance. The nominal dispersion shall be 90º x 40º over a frequency range of 2.5 kHz to 12.5 kHz. The dimensions of the enclosure are defined as 27.29" x 17.275" x 19.886" (HWD) at a weight of 7l lbs.

TD2215 Page 2 of 2

COMMUNITY PROFESSIONAL LOUDSPEAKERS

333 East 5th Street, Chester, PA USA 19013-4511 TEL (610) 876-3400 FAX (610) 874-0190

www.loudspeakers.net

Specifications subject to change without notice.

TD2215 [06-02-03]