Siemens S795

Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / introduction.fm / 09.10.2009
Gigaset S790/S795 – more than just a telephone
Gigaset S790/S795* – more than just a telephone
Your telephone sets new standards for the way you communicate at home.
The configuration and user interface of the cordless phone are excellent,
providing you with first-class voice quality in speaker mode, while the USB port
offers you enormous flexibility.
The large TFT display, user-friendly keypad and clearly laid out menu are very
simple to use.
Your phone can do a whole lot more:
u You can synchronise your directories on your telephone, mobile phone and
PC via the USB port using the Gigaset QuickSync software (¢ page 77).
u You can save appointments (¢ page 54) and anniversaries, e.g., birthdays
(¢ page 34), in your phone and it will remind you of them in advance.
u You can designate important people as VIPs to identify important calls from
the ringtone (¢ page 32).
u You can assign a picture to entries in the directory – in future the picture will
appear every time you receive a call from this number (¢ page 32).
u If you do not want to take calls where the caller has withheld their number,
just set your handset to only ring if Calling Line Identification has not been
withheld (¢ page 64).
u If you do not wish to be disturbed, you can simply set up a time control so
that your phone will only ring when it is convenient (¢ page 64). VIP calls
are still connected.
u You can assign important numbers to the number keys on your phone.
The number is then dialled by simply pressing a key (¢ page 61).
u You can set the display to large font to increase readability in particularly
important situations (e.g., the directory and lists) (¢ page 63).
u You can adapt the menu display to suit your individual requirements so that
only the most important functions (standard mode) or all functions
(expert mode •) are displayed (¢ page 25). Menu options that are only
available in expert mode are marked with the • icon.
u Gigaset Green Home – Be environmentally aware when using your phone.
Details about our ECO DECT products can be found at
www.gigaset.com/customercare.
You can find additional information about your phone at
www.gigaset.com/gigasets790.
Version 4, 16.09.2005
Have fun using your new phone!
* Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG
1
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / overview.fm / 09.10.2009
The handset at a glance
¢
¢
The handset at a glance
i
17
Ã
V
1
2
07:15
INT 1
14 Oct
3
Calls
SMS
4
16
15
5
14
6
13
12
11
7
10
8
9
1 Display in idle status
2 Battery charge status
(
page 16)
3 Side keys
Set call (
page 63) or
ringtone volume (
page 64)
¢
¢
page 20)
4 Display keys (
5 Message key (
page 37)
Access to call and message lists;
Flashes: new message or new call
6 End call key, On/Off key
End call, cancel function, go back one menu
level (press briefly), back to idle status (press
and hold), activate/deactivate handset
(press and hold in idle status)
7 Hash key
Keypad lock on/off (press and hold in
idle status);
toggles between upper/lower case
and digits
8 Mute key (
page 29)
Mute the microphone
9 Microphone
10 Recall key
- Consultation call (flash)
- Insert a dialling pause (press and hold)
11 Star key
Ringtone on/off (press and hold);
with an open connection: switch between
pulse dialling/tone dialling (press briefly);
text input: open table of special characters
page 17)
12 Headset socket (
13 Key 1
Dial answering machine (S795 only)/
network mailbox (press and hold)
14 Talk key
Flashes: incoming call;
Accept a call; open redial list (press briefly);
start dialling (press and hold);
When writing an SMS: send SMS
15 Speaker key
Switch between earpiece and speaker mode
page 19)
16 Control key (
17 Signal strength (
page 16)
Green: Eco Mode (
page 53) activated
18 Answering machine symbol (S795 only)
Answering machine switched on;
Flashes: answering machine is recording a
message or is being operated by another
internal party
¢
¢
¢
¢
¢
¢
Version 4, 16.09.2005
Gigaset service contact numbers:
For personal advice on our range of products and for repairs or guarantee/warranty claims call:
Service Centre UK:
08453 6708 12
(local call cost charge)
Please have your proof of purchase ready when calling.
2
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / overview.fm / 09.10.2009
Display symbols
Display symbols
The following symbols are displayed dependent on the settings and the operating status
of your telephone:
Signal strength i (¢ page 53)
or ECO Mode+ icon ¼ (¢ page 53)
Answering machine switched on (S795 only, ¢ page 4)
Ringtone switched off (¢ page 64)
Keypad lock switched on (¢ page 22)
Batteries are charged (¢ page 16)
Charge status of the batteries (¢ page 16)
i
Ã
ó
Û 08:00
INT 1
Ã
02
™
10
˝
V
07:15
14 Oct
¾
09
Calls
08
SMS
Alarm switched on and wake-up time set (¢ page 56)
Current time (¢ page 15)
Current day and month (¢ page 15)
Name of the handset (¢ page 59)
Number of new messages:
¢
Signalling
¢
External call (¢ page 28)
Internal call (¢ page 58)
Answering machine is
recording (¢ page 46)
Alarm (¢ page 56)
Anniversary (¢ page 54)
Appointment (¢ page 54)
Ø «Ú
Version 4, 16.09.2005
¢
¢
u à on the network mailbox (
page 37)
u ™ in the list of missed calls (
page 37)
u ¾ in the SMS list (
page 40)
u in the list of missed appointments (
page 37)
ØìÚ
ØåÚ
ØðÚ
Ø þÚ
ØáÚ
3
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / overview.fm / 09.10.2009
The base at a glance
The base at a glance
During message playback:
You can use the keys on the base to register handsets to the base, search for handsets (paging), (¢ page 57) and operate
the integrated answering machine
(Gigaset S795 only).
Gigaset S795 base
4 Play/Stop key
Play back new messages from answering
machine or cancel playback (press briefly).
Play back new and old messages (press and
hold).
5 Skip to next message (press once) or skip
ahead two messages (press twice).
6 Skip back five seconds (press briefly once),
skip back to the beginning of the message
(press and hold) or skip back to the previous
message (press twice).
7 Delete current message.
8 Adjust volume during message playback:
÷ = quieter; ø = louder.
While an external call is being signalled:
adjust ringtone volume.
Please note:
If the answering machine is being operated from a handset or if it is recording a
message (00 flashes), it cannot be operated from the base at the same time.
Gigaset S790 base
3
8
4
1
2
6
7
5
1 Registration/Paging key
Press briefly: search for handsets (paging)
(
page 57).
Press and hold: register handsets and DECT
devices (
page 57).
2 On/Off key
Activating/deactivating the answering machine.
3 Display
Lights up: answering machine is activated.
The number of saved messages is displayed.
00 flashes: the answering machine is
recording a new message.
Flashes slowly: there are new messages.
The number of new messages is displayed.
99 flashes quickly: the answering machine
is full.
Version 4, 16.09.2005
¢
4
¢
Registration/Paging key
– Press briefly: search for handsets (paging)
page 57.
– Press and hold: register handsets and
DECT devices (
page 57).
¢
¢
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / S795IVZ.fm / 09.10.2009
Contents
Contents
Gigaset S790/S795 – more than just a telephone . . . . . . . . . . . . . 1
The handset at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Display symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
The base at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Checking the package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting up the base and charger (if included) . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting the charger (if included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting up the handset for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting the headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting the USB data cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
What would you like to do next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Control key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keys on the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Correcting incorrect entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating the keypad lock . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
20
20
20
20
21
22
22
23
Menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Making an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accepting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calling Line Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speaker mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching to mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
28
28
28
29
29
Version 4, 16.09.2005
Making calls using network services . . . . . . . . . . . . . . . . . . . . . . 30
Calling Line Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ringback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call waiting during an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call divert (CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Consultation call, call swap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
30
30
31
31
5
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / S795IVZ.fm / 09.10.2009
Contents
Using the directory and lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Redial list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Incoming SMS message list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Answering machine list (Gigaset S795 only) . . . . . . . . . . . . . . . . . . . . . . . .
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening lists with the message key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of missed alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
35
36
36
36
37
37
Making cost-effective calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Automatic network provider code (preselection) . . . . . . . . . . . . . . . . . . . . . 38
SMS (text messages) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Writing/sending an SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving an SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMS with vCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notification via SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMS mailboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting SMS centres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMS on a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating SMS function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMS troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39
40
42
42
42
43
44
44
45
Operating the Gigaset S795 base answering machine . . . . . . . 46
Operating via the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating call screening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the recording parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting fast access for the answering machine using key 1 . . . . . . . . . . .
Operating when on the move (remote operation) . . . . . . . . . . . . . . . . . . . .
46
49
49
50
50
Using the network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Configuring fast access for the network mailbox . . . . . . . . . . . . . . . . . . . . . 52
Viewing the network mailbox message . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Setting an appointment (calendar) . . . . . . . . . . . . . . . . . . . . . . . 54
Displaying missed appointments, anniversaries . . . . . . . . . . . . . . . . . . . . . . 55
Setting the alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Version 4, 16.09.2005
Using multiple handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
De-registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locating a handset ("Paging") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making internal calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Listening in to an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the name of a handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing a handset's internal number . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
57
57
57
58
58
59
59
60
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / S795IVZ.fm / 09.10.2009
Contents
Using a handset as a room monitor . . . . . . . . . . . . . . . . . . . . . . . 60
Handset settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Quick access to numbers and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating auto answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the speaker/earpiece volume . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resource Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating advisory tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting your own area code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restoring the handset default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61
62
62
63
63
64
65
66
66
66
Setting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Changing the base Gigaset S795 ringtones . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating music on hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeater support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protecting against unauthorised access . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting the base to the factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
67
67
67
68
68
Connecting the base to the PABX . . . . . . . . . . . . . . . . . . . . . . . . . 69
Dialling modes and recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving an access code (outside line code) . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching temporarily to tone dialling (DTMF) . . . . . . . . . . . . . . . . . . . . . . .
69
69
70
70
Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Questions and answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Guarantee Certificate
United Kingdom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Protecting our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Writing and editing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75
75
75
76
Additional functions via the PC interface . . . . . . . . . . . . . . . . . . 77
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Mounting the base on the wall (Gigaset S790 only) . . . . . . . . . 82
Mounting the charger on the wall . . . . . . . . . . . . . . . . . . . . . . . . 82
Version 4, 16.09.2005
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
7
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / security.fm / 09.10.2009
Safety precautions
Safety precautions
Warning
Be sure to read this user guide and the safety precautions before using your telephone
Explain their content and the potential hazards associated with using the telephone to
your children.
$
Use only the power adapter supplied, as indicated on the underside of the base.
Use only rechargeable batteries that correspond to the specification provided on page 75, as this could otherwise result in significant health risks and
personal injury.
Using your telephone may affect nearby medical equipment. Be aware of the
technical conditions in your particular environment, e.g., doctor's surgery.
Do not hold the rear of the handset to your ear when it is ringing or when
speaker mode is activated. Otherwise you risk serious and permanent damage
to your hearing.
Your Gigaset is compatible with the majority of digital hearing aids on the market. However, perfect function with all hearing aids cannot be guaranteed.
The handset may cause an unpleasant humming or whistling noise in hearing
aids or cause them to overload. If you require assistance, please contact the
hearing aid supplier.
Do not install the base or charger in bathrooms or shower rooms. The base and
charger are not splashproof (¢ page 75).
Do not use your phone in environments with a potential explosion hazard
(e.g., paint shops).
ƒ
If you give your Gigaset to a third party, make sure you also give them the user
guide.
Remove faulty bases from use or have them repaired by our Service department,
as they could interfere with other wireless services.
Please note
Version 4, 16.09.2005
Not all of the functions described in this user guide are available in all countries.
8
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
First steps
First steps
Checking the package contents
1
3
or
2
4
5
9
6
8
7
Version 4, 16.09.2005
1 One Gigaset S790/S795 base
2 One power adapter
3 One Gigaset S79H handset
4 One phone cord
5 Two batteries
6 One battery cover
7 One belt clip
8 One plastic headset socket cover
9 One user guide
If you have purchased a
model with multiple
handsets the package
should contain two batteries, a battery cover, a belt
clip and a charger 9 with
power adapter J for each
additional handset.
9
J
9
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
First steps
Setting up the base and charger (if included)
The base and charger are designed for use in dry rooms in a temperature range
of +5°C to +45°C.
¤ Set up the base at a central point in the building on a level, non-slip surface
or mount the base (Gigaset S790 only) or charger on the wall (¢ page 82).
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside
buildings. The range is reduced when Eco Mode (¢ page 53) is activated.
The phone's feet do not usually leave any marks on surfaces. However, due to
the multitude of different varnishes and polishes used on today's furnishings,
the occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u Never expose the telephone to the influence of heat sources, direct sunlight
or other electrical devices.
u Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
Connecting the base
¤ First connect the
¤
power adapter 1.
Then connect the
telephone jack 2
and insert the
cables into the
cable ducts.
1
1
2
1
Please note:
u The power adapter must always be connected, as the phone will not oper-
ate without a mains connection.
u Use only the power adapter and phone cord supplied. Pin connections on
Version 4, 16.09.2005
telephone cables can vary (pin connections ¢ page 76).
10
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
First steps
Connecting the charger (if included)
2
¤ Connect the flat plug from the power
1
adapter 1.
¤ Plug the power adapter into the plug
socket 2.
2
Version 4, 16.09.2005
To disconnect the plug from the charger,
press the release button 1 and disconnect
the plug 2.
1
11
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
First steps
Setting up the handset for use
The display and keypad are protected by plastic films.
Remove the protective films!
Inserting the batteries and closing the battery cover
Warning
Use only rechargeable batteries recommended by Gigaset Communications
GmbH (¢ page 75), i.e., Never use conventional (non-rechargeable)
batteries, as this could result in significant health risks and personal injury.
For example, the outer casing of the batteries could be damaged or the
batteries could explode. The phone could also malfunction or be damaged
as a result of using batteries that are not of the recommended type.
¤ Insert the batteries
with the polarity in the
correct direction.
The polarity is indicated in/on the battery
compartment.
¤ First insert the battery
¤
Version 4, 16.09.2005
To open the battery cover, for
instance to replace the batteries, insert a coin into the cavity on the left-hand side of the
casing, then pull the battery
cover in an upward direction.
12
cover at the top a.
Then press the cover b
until it clicks into place.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
First steps
¤ Insert the plastic cover provided for the
headset socket to ensure optimum sound
in speaker mode.
Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤ To attach – press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤ To remove – press the centre of
the belt clip firmly with your
right thumb, push the fingernail
of your left index finger up
between the clip and the housing and pull the clip in an
upward direction.
Placing the handset in the base/charger
¤ Place the handset in the base/charger with its display facing forward.
Each handset is registered with the base at the factory. You do not need to register the handset again. If you wish to use your handset with a different base
or use further handsets with your base, you have to register the handset manually (¢ page 57).
To charge the batteries, leave the handset in the base/charger.
Please note
Version 4, 16.09.2005
Only place the handset in the designated base/charger.
13
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
First steps
First battery charge and discharge
The correct charge level can only be displayed if the batteries are first fully
charged and discharged.
¤ Charge the handset for 8.5 hours in the
base/charger.
¤ Then remove the handset
8.5 hrs
from the base/charger and
do not replace it until the
batteries are fully discharged.
Please note
u After the first battery charge and discharge, you may replace your hand-
set in the base/charger after every call.
u Always repeat the charging and discharging procedure if you remove the
batteries from the handset and reinsert them.
u The batteries may warm up during charging. This is not dangerous.
u After a while, the charge capacity of the batteries will decrease for tech-
Version 4, 16.09.2005
nical reasons.
14
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
First steps
Setting the date and time
Set the date and time so that the correct date and time can be assigned to
incoming calls, and so that the alarm can be used.
Calls
¤ Press the key below §Time§ on the dis-
play screen to open the input field.
(If you have already set the time and
date, open the input field via the
menu ¢ page 27.)
Time
Date/Time
The Date/Time submenu is shown on
the display.
¤ The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g., 4
Q2Q
QO for 14/10/2009.
Date:
31.01.2009
Time:
00:00
Back
Save
Press the right or left control
key to change the input position and correct an entry.
¤ Press down on the control key to switch
to the time input field.
Date/Time
Date:
Version 4, 16.09.2005
¤ Enter the hours and minutes in
4-digit format via the keypad,
e.g., QM
5
for 07:15 am.
Change the input position with
the control key if necessary.
14.10.2009
Time:
00:00
Back
Save
15
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
First steps
Back
Save
¤ Press the key below §Save§ on the display screen to confirm your entry.
Date/Time
‰
Saved
The display shows Saved. You will hear
a confirmation tone and the handset
will automatically return to idle status.
Display in idle status
Once the phone is registered and the time is set, the idle display is shown as in
this example. If the answering machine is activated, the answering machine
icon à is displayed in the header.
Displays
Version 4, 16.09.2005
u Reception between the base and the handset:
i
Ã
V
07:15
– Poor to good: Ð i Ñ Ò
INT 1
14 Oct
– No reception: | flashes
Green: Eco Mode activated (¢ page 53)
u Charge status of the batteries:
– y y { { (empty to full)
– y flashes red: batteries almost empty
Calls
SMS
– xy x{ x{ (charging)
u INT 1
Internal name of the handset (¢ page 59)
If Eco Mode+ (¢ page 53) is activated, the ¼ icon is displayed in the top left
corner of the display.
Your answering machine is set with a pre-recorded announcement.
Your phone is now ready for use!
16
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
First steps
Connecting the headset
After removing the plastic cover, you can connect a
headset to the left-hand side of your telephone with the
2.5 mm jack connector.
See the relevant product page at www.gigaset.com for
information on recommended headsets.
The headset volume corresponds to the settings for the
handset volume (¢ page 63).
After using the headset, replace the plastic cover to
enable optimum sound in speaker mode.
Connecting the USB data cable
You can connect a standard USB data cable with a mini-B connector to the back
of your handset to connect the handset to a PC (¢ page 77).
¤ Remove the belt clip (if attached)
(¢ page 13).
¤ Remove the battery cover
(¢ page 12).
¤ Connect the USB data cable to
Version 4, 16.09.2005
USB socket 1.
1
17
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
First steps
What would you like to do next?
Now you have successfully set up your Gigaset, you will certainly want to adapt
it to your personal requirements. Use the following guide to quickly locate the
most important topics.
If you are unfamiliar with menu-driven devices such as other Gigaset telephones, read the section entitled "Using the phone" (¢ page 19) first.
Information on ...
Setting the ringtone and volume
Setting the earpiece volume
Recording your own announcement for the
answering machine
Setting Eco Mode / Eco Mode+
Preparing the telephone for SMS reception
Operating the telephone on a PABX
Registering existing Gigaset handsets to a base
Transferring directory entries from existing Gigaset
handsets to new handset(s)
Connecting the phone to the PC
g page 64
g page 63
... is located here.
g page 46
g page 53
g page 39
g page 69
g page 57
g page 34
g page 77
Version 4, 16.09.2005
If you have any questions about using your phone, please read the tips on
troubleshooting (¢ page 71) or contact our Customer Care team (¢ page 71).
18
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
Using the phone
Using the phone
Control key
Below, the side of the control key that you must press in the
respective operating situation is marked in black (top, bottom, right, left, centre), e.g., v for "press right on the control
key" or w for "press the centre of the control key".
The control key has a number of different functions:
When the handset is in idle status
s
v
u
t
Open the directory.
Open the main menu.
Open the list of handsets.
Call up the menu for setting the handset's call volume
(¢ page 63).
In the main menu
t, s, v or u
Navigate to the required function.
In submenus and lists
t/s
Scroll up/down line by line.
In input fields
Use the control key to move the cursor up t, down s, right v or left u.
Press and hold v or u to move the cursor word by word.
During an external call
s
u
t
Open the directory.
Initiate an internal consultation call.
Adjust the loudspeaker volume for earpiece and speaker mode.
Functions when pressing the middle of the control key
Depending on the operating situation, the key has different functions.
u In idle status the key opens the main menu.
u In submenus, selection and input fields, the key takes on the function of
the display keys §OK§, §Yes§, §Save§, §Select§ or §Change§ .
Version 4, 16.09.2005
Please note
These instructions demonstrate the main menu being opened by pressing
the right of the control key and functions being actuated by pressing the
appropriate display key. However, if you prefer, you can use the control key
as described above.
19
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
Using the phone
Display keys
The functions of the display keys change depending on the particular operating
situation. Example:
Back
Save
Current display key functions.
Display keys
Some important display keys:
Options
Open a menu for further functions.
Confirm selection.
OK
Delete key: delete character by character/word by word from right
Û
to left.
Back
Go back one menu level or cancel operation.
Save
Store entry.
Þ
Open the redial list.
à
Forwarding a call to the answering machine.
Keys on the keypad
c / Q / * etc.
Press the matching key on the handset.
~
Enter digits or letters.
Side keys
ø/÷
Press the keys on the right of the handset to set the volume for the
handset, ringtone, speaker, alarm, signalling of appointments
and the headset depending on the situation.
Correcting incorrect entries
Version 4, 16.09.2005
You can correct incorrect characters in the input fields by navigating to the
incorrect entry using the control key. You can then:
u Delete the character to the left of the cursor with the display key Ñ
(press and hold to delete the word)
u Insert characters at the cursor position
u Overwrite the highlighted (flashing) character, e.g., when entering time and
date.
20
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
Using the phone
Using the menus
Your telephone's functions are accessed using a menu that has a number of levels.
The menu display can be extended (expert mode •) or restricted (standard
mode). Expert mode is the active default setting.
Settings or functions that are only available in expert mode are marked in these
instructions by the • icon.
Switching between standard mode/expert mode and the menu overview
(¢ page 25).
Main menu (first menu level)
¤ When the handset is in idle status press the right control key v to open the
main menu.
The main menu functions are shown in the display
with icons. The icon for the selected function is highlighted in orange and the name of the associated
function appears in the display header.
To access a function, i.e., to open the corresponding
submenu (next menu level):
¤ Use the control key p to select the required function and press the display key §OK§.
Briefly press the display key §Back§ or the end call key
a to revert back to idle status.
Ç
Settings
·
É
Â
Ï
Ë Ì
Ê
á
Back
OK
Submenus
The functions in the submenus are displayed as lists
(example on the right).
To access a function:
¤ Scroll to the function with the control key q and
press §OK§.
Briefly press the display key §Back§ or the end call key
a to return to the previous menu level/cancel the
operation.
Settings
Date/Time
Audio Settings
Display
Language
Registration
Version 4, 16.09.2005
Back
OK
21
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
Using the phone
Reverting to idle status
You can revert to idle status from anywhere in the menu as follows:
¤ Press and hold the end call key a.
or:
¤ Do not press any key: after 2 minutes the display will automatically revert
to idle status.
Settings that have not been saved by selecting the display keys §OK§, §Yes§, §Save§
or §Change§ are lost.
An example of the display in idle status is shown on page 16.
Activating/deactivating the handset
a
With the phone in idle status, press and hold the end call key (confirmation tone) to switch off the handset.
Press and hold the end call key again to switch the handset on.
Please note
When the handset is switched on, an animation showing the Gigaset logo
is displayed for several seconds.
Activating/deactivating the keypad lock
The keypad lock prevents any inadvertent use of the phone.
#
Press and hold the hash key in idle status to activate or deactivate
the keypad lock. You will hear the confirmation tone.
If the keypad lock is activated, you will see a message when you press a key.
The keypad lock deactivates automatically when you receive a call. It is reactivated when the call is finished.
Please note
Version 4, 16.09.2005
When the keypad lock is active, you cannot even call emergency numbers.
22
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
Using the phone
Using this guide
The operating steps are shown in abbreviated form.
Example:
The illustration:
v ¢ Ï ¢ Eco Mode ¢ Eco Mode+ (³ = on)
means:
¤ Press right on the control key v
to open the main menu.
Ç
Settings
·
É
Â
Ï
¤ Press right, left, down and up on
control key p to navigate to
the Settings submenu.
Ë Ì
Ê
á
Back
OK
¤ Press the display key §OK§ to
confirm your selection.
Settings
Display
¤ Press down on the control key s
Language
until the Eco Mode menu option
appears on the display.
Registration
Menu View
Eco Mode
Back
OK
¤ Press the display key §OK§ to
Version 4, 16.09.2005
confirm your selection.
23
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / starting.fm / 09.10.2009
Using the phone
Eco Mode
³
´
Eco Mode
Eco Mode+
Back
¤ Press down on the control key s
until the Eco Mode+ menu option
appears on the display.
Change
¤ Press the display key §Change§ to
activate/deactivate the function.
Eco Mode
Eco Mode
Eco Mode+
Back
³
³
The change is effective immediately
and does not need to be confirmed.
Change
¤ Press the key below §Back§ on the
Version 4, 16.09.2005
display screen to jump back to the
previous menu level.
or
Press and hold the end call key a
to return to idle status.
24
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / menuetree.fm / 09.10.2009
Menu overview
Menu overview
Setting standard mode or expert mode
The menu display can be extended (expert mode •) or restricted (standard mode).
Menu options that are only available in expert mode are marked with the • icon.
To change these settings:
Select v ¢ Ï ¢ Menu View ¢ Simplified (standard mode) or Complete (expert
mode) ¢ §Select§ (the active mode is marked with Ø)
Open the main menu: press v when the phone is in idle mode.
Ç Select Services
Withhold Number
All Calls
¢ page 30
Call Divert
Call Waiting
Ringback Off
·
Resource Directory
Capacity
¢ page 65
¢ page 65
¢ page 65
¢ page 65
Room Monitor
¢ page 60
Screensavers
Caller Pictures
Sounds
É Additional Features
Ê Call Lists
All Calls
Outgoing Calls
Accepted Calls
Missed Calls
Version 4, 16.09.2005
¢ page 30
¢ page 31
¢ page 30
¢ page 36
¢ page 36
¢ page 36
¢ page 36
25
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / menuetree.fm / 09.10.2009
Menu overview
Ë SMS
You have activated an SMS mailbox (general or private) without a PIN
New SMS
Incoming
Draft
¢ page 39
¢ page 41
¢ page 40
You have activated an SMS mailbox with a PIN or 2–3 mailboxes
Mailbox
New SMS
Incoming
Draft
Mailbox 1
Mailbox 2
Mailbox 3
•
Settings
New SMS
Incoming
Draft
Service Centres
SMS Mailboxes
Ì Voice Mail
Play Messages
Notification
Network Mailbox
Answering Machine *
Activation *
Announcements *
¢ page 46
Rec. Announcement *
Play Announcement *
Del. Announcement *
•
•
•
•
Recordings *
Call Screening *
Network Mailbox **
Set Key 1 *
•
•
•
Rec. Advisory Msg. *
Play Advisory Msg. *
Del. Advisory Msg. *
¢ page 49
¢ page 49
¢ page 52
Network Mailbox
Answering Machine
* Base with answering machine only
** Base without answering machine only
Version 4, 16.09.2005
á Organizer
Calendar
Alarm Clock
Missed Alarms
26
¢ page 54
¢ page 56
¢ page 55
¢ page 39
¢ page 41
¢ page 40
¢ page 39
¢ page 41
¢ page 40
¢ page 44
¢ page 42
¢ page 42
¢ page 52
¢ page 46
¢ page 46
¢ page 46
¢ page 46
¢ page 46
¢ page 47
¢ page 47
¢ page 52
¢ page 52
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / menuetree.fm / 09.10.2009
Menu overview
 Directory
¢ page 32
Date/Time
¢ page 15
Ï Settings
Audio Settings
Handset Volume
•
Advisory Tones
Ringtones(Handset)
Ringtones (Base)
•
Display
Music on hold
Screensaver
Large Font
Colour Schemes
•
Language
Registration
Backlight
¢ page 62
Register Handset
De-reg. Handset
•
Select Base
Telephony
Auto Answer
Area Codes
Listening In
Preselection
Access Code
Dialling Mode
•
Recall
System
Handset Reset
Base Reset
Repeater Mode
System PIN
Menu View
Simplified
Complete
Eco Mode
Eco Mode
Version 4, 16.09.2005
Eco Mode+
¢ page 63
¢ page 66
¢ page 64
¢ page 67
¢ page 67
¢ page 62
¢ page 63
¢ page 63
¢ page 63
¢ page 57
¢ page 57
¢ page 58
¢ page 63
¢ page 66
¢ page 59
¢ page 38
¢ page 69
¢ page 69
¢ page 69
¢ page 66
¢ page 68
¢ page 67
¢ page 68
¢ page 25
¢ page 25
¢ page 53
¢ page 53
27
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / telefony.fm / 09.10.2009
Making calls
Making calls
If the backlight is deactivated
(¢ page 63) it is switched on by pressing
any key. In this case the pressed key has no
other function.
Making an external call
External calls are calls using the public telephone network.
~c
Enter the number and press
the talk key.
or:
c~
Press and hold the talk key c
and then enter the number.
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call
while the call is in progress.
Please note
Dialling with the directory
(¢ page 32), call list (¢ page 36),
redial list (¢ page 35) and automatic
redial (¢ page 35) saves you from
repeatedly keying in phone numbers.
Ending a call
a
Press the end call key.
Version 4, 16.09.2005
Accepting a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing talk key c.
Accept the call by:
¤ Pressing the talk key c.
¤ Pressing the speaker key d.
¤ Gigaset S790: press the display key
§Accept§.
¤ Gigaset S795: press the display key
Ô to divert the call to the answering
machine (¢ page 49).
28
If the handset is in the base/charger and
the Auto Answer function is activated
(¢ page 63), the handset automatically
answers the call when you remove it from
the base/charger.
To deactivate the ringtone, press the
§Silence§ display key. You can accept the call
as long as it is displayed on the screen.
Calling Line Identification
When you receive a call, the caller's
number is displayed on the screen if the
following conditions are met:
u Your network provider supports CLIP,
CLI.
– CLI (Calling Line Identification): the
caller's number is transmitted.
– CLIP (Calling Line Identification Presentation): the caller's number is displayed.
u You have requested CLIP from your network provider.
u The caller has requested CLI from the
network provider.
Call display with CLIP/CLI
If the number of the caller is saved in your
directory, you will see their name, and if
you have assigned a caller picture to that
caller, this will also be displayed.
Ø«Ú
1
2
1234567890
Accept
Gigaset S790
Silence
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / telefony.fm / 09.10.2009
Making calls
or
Ø«Ú
1234567890
à
Gigaset S795
1
2
Silence
1 Ringtone icon
2 Number or name of caller
The following is displayed in place of the
number:
u External, if no number is transmitted.
u Withheld, if the caller has withheld Calling Line Identification (¢ page 30).
u Unavailable, if the caller has not
arranged Calling Line Identification.
Please note
The ringtone can be switched off for
unknown calls (calls with Calling Line
Identification withheld) (¢ page 64).
Speaker mode
In speaker mode, instead of holding the
handset to your ear you can put it down,
for example on the table in front of you.
This allows others to participate in the call.
Activating/deactivating speaker mode
Switching between earpiece and speaker
mode
d
Press the speaker key.
During a call and when listening to the
answering machine (Gigaset S795 only),
activate or deactivate speaker mode.
If you wish to place the handset in the
base/charger during a call:
¤ Press and hold the speaker key d
while placing the handset in the base/
charger and for a further 2 seconds.
For instructions on adjusting the speaker
volume (¢ page 63).
Please note
If you have a headset connected, you
can switch between the headset and
speaker mode.
Switching to mute
You can deactivate the microphone in
your handset during an external call.
h
Press key to mute the handset.
The display shows Microphone
is off.
Press the key again to reactivate the microphone.
Please note
u If the telephone is muted, all keys
except the mute key h and the
end-call key a will not work.
u A connected headset will also be
muted.
Activating while dialling
~d
Version 4, 16.09.2005
¤
Enter the number and press
the speaker key.
Inform your caller before you use the
speaker function so that the caller
knows a third party may be listening.
29
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / TNet_Features_SAG.fm / 09.10.2009
Making calls using network services
Making calls using network
services
Network services are functions that your
network provider makes available to you.
You have to request these services from
your network provider.
¤ It is not possible to reprogram the
network services.
¤ If you require assistance, please contact your network provider.
Calling Line Identification
Withhold Calling Line Identification once
(CLIR):
If you make a call, your number is shown
in the display of the call recipient if that
person has activated CLIP (¢ page 28).
If, in certain instances, you do not wish to
have your number displayed, you can
withhold your number for the next call
(CLIR).
v ¢ Ç ¢ Withhold Number
~
Enter phone number.
c
Press the talk key.
Ringback
Initiating ringback
If the number you have called is engaged,
you can initiate ringback. As soon as the
line belonging to the person you called is
free, your handset will ring.
You hear the busy tone.
§Options§ ¢ Ringback
a
Press the end call key.
Version 4, 16.09.2005
Cancelling ringback
You can cancel a ringback that has already
been initiated.
v ¢ Ç ¢ Ringback Off
30
Call waiting during an
external call
If the function is activated, during an
external call you will hear a call waiting
tone to signal that another external caller
is trying to get through. If you have CLIP
(¢ page 28), the number of the waiting
caller or the corresponding directory entry
is shown in the display.
Activating/deactivating call waiting
v ¢ Ç ¢ All Calls ¢ Call Waiting
Status
Activate/deactivate.
§Dial§
Press the display key.
Accepting a waiting call
You are making an external call and hear
the call waiting tone.
You have the following options:
If CLIP (¢ page 28) is activated
§Accept§
Press the display key.
If CLIP is not activated
§Options§ ¢ Accept Waiting call
Once you have accepted the waiting
call you can switch between the two
callers ("call swap" ¢ page 31).
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / TNet_Features_SAG.fm / 09.10.2009
Making calls using network services
Call divert (CD)
When diverting a call, the call is forwarded
to another connection.
The following options are available:
u All Calls: Calls are diverted immediately.
No more calls are signalled on your
phone.
u No Answer: Calls are diverted if no one
accepts the call within several rings.
u When Busy: Calls are forwarded when
your line is busy. Call is diverted without a call waiting tone.
v ¢ Ç ¢ All Calls ¢ Call Divert
¤ You can enter data in the following
fields:
When:
Select All Calls / When Busy / No Answer.
Phone Number:
Enter the number to which the call is to
be diverted.
Status:
Activate/deactivate call divert.
§Send§
Press the display key.
a
After the announcement,
press the end call key.
Consultation call, call swap
These functions enable you to:
u Call a second external caller (consultation call)
u Switch between two calls (call swap)
Version 4, 16.09.2005
Consultation call
The phone number is dialled. You are connected to the second participant.
If the caller does not answer, select the
display key §End§ to return to the first participant.
Please note
You can also select the second participant's phone number from the directory or the call list (¢ page 34).
Ending a consultation call
§Options§ ¢ End Active Call
You are reconnected to the first caller.
You can also end the consultation call by
pressing the end call key. The connection
is briefly interrupted and you will receive a
call back. Once you have pressed the talk
key, you are reconnected to the first caller.
Call swap
You can speak to both callers one at a time
(call swap).
Prerequisite: You are conducting an
external call and have called a second participant (consultation call) or have
accepted a waiting call.
¤ Use q to swap between the participants.
The caller you are currently speaking to is
marked with the æ icon.
Ending the current call.
§Options§
¢ End Active Call
You are re-connected to the waiting caller.
You can call a second external caller.
The first call is placed on hold.
During an external call:
§Ext.Call§
Press the display key.
The previous call is placed on
hold. The other participant
hears an announcement.
~
Enter the second participant's
telephone number.
31
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / direct_charges.fm / 09.10.2009
Using the directory and lists
Using the directory and lists
The options are:
u Directory
u Redial list
u Incoming SMS message list
u Call lists
u List of missed appointments
u Answering machine list
(Gigaset S795 only)
You can create a personalised directory for
your own handset. You can also send lists/
entries to other handsets (¢ page 34).
Directory
You can save up to 500 entries in the directory.
Please note
To quickly access a number from the
directory (quick dial), you can assign
the number to a key (¢ page 61).
Directory
In the directory, you can save:
u Up to three numbers and associated
first names and surnames
u E-mail addresses
u Anniversaries with reminder
u VIP ringtone with VIP icon
u Caller pictures.
You open the directory in idle status using
the s key.
Version 4, 16.09.2005
Length of the entries
3 numbers:
each max. 32 digits
First name and surname:
each max. 16 characters
E-mail address:
max. 64 characters
32
Saving a number in the directory
s ¢ <New Entry>
¤ You can enter data in the following
fields:
First Name:/Surname:
Enter first names and/or surnames.
If you do not enter a name in either of
the fields, the phone number is saved
and displayed in place of a surname.
(For instructions on entering text and
special characters, please see
¢ page 76.)
Phone (Home): / Phone (Office): /
Phone (Mobile):
Enter a number in at least one of the
fields.
When scrolling through the directory,
the entries are highlighted by a prefixed symbol: ä/ k/ l.
E-mail:
Enter the e-mail address.
Anniversary:
Select On or Off.
With setting On:
Enter Annivers. (Date) and Anniversary
(time) and select reminder type:
Anniversary (tone) ¢ page 34.
Caller Picture:
If required, select a picture to be
displayed when this person calls
(see "Resource Directory", page 65).
Prerequisite: Calling Line Identification
(CLIP).
Caller Melody (VIP):
Mark a directory entry as a VIP
(Very Important Person) by assigning
a specific ringtone to it. VIP calls are
recognised by the ringtone.
When scrolling through the directory,
VIP entries are highlighted by the
Æ icon.
Prerequisite: Calling Line Identification
(CLIP).
§Save§
Press the display key.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / direct_charges.fm / 09.10.2009
Using the directory and lists
Order of directory entries
Managing directory entries
Directory entries are generally sorted
alphabetically by surname. Spaces and
digits take first priority. If only the first
name was entered in the directory, this is
incorporated into the sort order instead of
the surname.
The sort order is as follows:
1. Space
2. Digits (0–9)
3. Letters (alphabetical)
4. Other characters
To get round the alphabetical order of the
entries, insert a space or a digit in front of
the first letter of the surname. These
entries will then move to the beginning of
the directory.
Viewing entries
Select a directory entry
s
Open the directory.
You have the following options:
u Use s to scroll through the entries
until the required name is selected.
u Enter the first letters of the name (max.
8), if necessary scroll to the entry with
the s key.
The directory searches for the surname.
If a surname has not been entered, the
directory searches for the first name.
Select from the directory
Version 4, 16.09.2005
s ¢ s (Select entry)
c
Press the talk key.
(If several numbers are
entered, select the required
number by pressing r and
press the talk key c again).
The number is dialled.
s ¢ s (Select entry)
§View§
Press the display key.
The entry is displayed.
§Options§
Press the display key.
The following functions can be selected
with q:
Display Number
To edit or add to a saved number, or to
save it as a new entry, press Ó after
the number is displayed.
Delete Entry
Delete selected entry.
Copy Entry
to Internal: Send a single entry to a
handset (¢ page 34).
vCard via SMS: Send a single entry in
vCard format via SMS.
Editing entries
s ¢ s (Select entry)
§View§ §Edit§ Press display keys one after the
other.
¤ Carry out changes and save.
Using other functions
s ¢ s (Select entry)
¢ §Options§ (Open menu)
The following functions can be selected
with q:
Display Number
Edit or add to a saved number and then
dial with c or save as a new entry; to
do so, press Ó after the number is
displayed.
Edit Entry
Edit selected entry.
Delete Entry
Delete selected entry.
33
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / direct_charges.fm / 09.10.2009
Using the directory and lists
Copy Entry
to Internal: Send a single entry to a
handset (¢ page 34).
vCard via SMS: Send a single entry in
vCard format via SMS.
Delete All
Delete all entries in the directory.
Copy All
to Internal: Send the complete list to a
handset (¢ page 34).
Available Memory
Display the number of entries that are
still available in the directory
(¢ page 32).
Using quick dial keys
¤ Press and hold the required quick dial
key (¢ page 61).
Transferring the directory to another
handset
Prerequisites:
u The sending and receiving handsets
Version 4, 16.09.2005
must both be registered to the same
base.
u The other handset and the base can
send and receive directory entries.
s ¢ s (Select entry)
¢ §Options§ (Open menu) ¢ Copy Entry /
Copy All ¢ to Internal
s
Select the internal number of
the receiving handset and
press §OK§.
You can transfer several individual entries
one after the other by responding to the
Entry copied - Copy next entry? prompt with
§Yes§.
A successful transfer is confirmed by a
message and confirmation tone on the
receiving handset.
34
Please note:
u Entries with identical numbers are not
overwritten on the receiving handset.
u The transfer is cancelled if the phone
rings or if the memory of the receiving
handset is full.
u Pictures and sounds assigned to entries
are not transferred.
Copying the displayed number to the
directory
You can copy numbers displayed in a list,
e.g., the call list or the redial list, or in an
SMS, to the directory.
A number is displayed:
§Options§ ¢ Copy to Directory
¤ Complete the entry (¢ page 32).
Gigaset S795: Message playback is interrupted during the number transfer from
the answering machine list.
Copying a number or e-mail address
from the directory
In some operating situations, you can
open the directory to copy a number or email address, for example. Your handset
need not be in idle status.
¤ Depending on the operating situation,
open the directory with s or Ó.
q
Select entry (¢ page 33).
Storing an anniversary in the directory
For each number in the directory, you can
save an anniversary and specify a time at
which a reminder call should be made on
the anniversary (default setting: Anniversary: Off).
s ¢ s (Select entry)
§View§ §Edit§ Press display keys one after the
other.
s
Scroll to the Anniversary line.
v
Select On.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / direct_charges.fm / 09.10.2009
Using the directory and lists
¤ You can enter data in the following
fields:
Annivers. (Date)
Enter day/month/year in 8-digit format.
Anniversary (time)
Enter the hour/minute for the reminder
call in 4-digit format.
Anniversary (tone)
Select the reminder type.
§Save§
Press the display key.
Please note
A time must be specified for reminder
calls. If you select a visual signal, a time
is not required and is automatically set
to 00.00.
Deactivating anniversaries
s ¢ s (Select entry)
§View§ §Edit§ Press display keys one after the
other.
s
Scroll to the Anniversary line.
v
Select Off.
§Save§
Press the display key.
Reminder call on an anniversary
In idle status, a reminder call is indicated
on the handset display and by the selected
ringtone and volume that has been set for
internal calls (¢ page 64).
ØðÚ
Miller,
Frank
Off
SMS
You can:
Version 4, 16.09.2005
§SMS§
§Off§
Write an SMS.
Press the display key to
acknowledge and end the
reminder call.
During the reminder call, you can permanently change the volume by pressing
the side keys ø (louder) or ÷ (quieter).
When you are on the phone, a reminder
call is indicated on the handset with a single advisory tone.
Anniversaries that are indicated during a
call and are not acknowledged are entered
in the Missed Alarms list (¢ page 37).
Redial list
The redial list contains the twenty
numbers last dialled with the handset
(max. 32 digits). If one of the numbers
is in the directory, the corresponding
name is displayed.
Manual redial
c
s
c
Press the key briefly.
Select entry.
Press the talk key again. The
number is dialled.
When a name is displayed, you can display
the corresponding phone number by
pressing the display key §View§.
Managing entries in the redial list
c
s
Press the key briefly.
Select entry.
§Options§
Open menu.
The following functions can be selected
with q:
Copy to Directory
Copy an entry to the directory
(page 32).
Automatic Redial
The selected number is automatically
dialled at fixed intervals (at least every
20 seconds). The speaker key flashes
and "open listening" is activated.
– Party answers:
Press the talk key c. The function
is ended.
35
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / direct_charges.fm / 09.10.2009
Using the directory and lists
– Party does not answer:
The call is terminated after approx.
30 seconds. The function is ended
after pressing any key or after ten
unsuccessful attempts.
Display Number (as in the directory,
page 33)
Delete Entry (as in the directory, page 33)
Delete All (as in the directory, page 34)
Incoming SMS message list
All received SMS messages are saved in
the incoming message list (¢ page 40).
Answering machine list
(Gigaset S795 only)
You can use the answering machine list
to listen to the messages that are on the
answering machine.
Call lists
Version 4, 16.09.2005
Prerequisite: Calling Line Identification
(CLIP, page 28)
Your telephone stores various types of
calls:
u Answered calls
u Outgoing calls
u Missed calls
u Calls recorded by the answering
machine (Gigaset S795 only)
You can view each type of call separately
or gain an overview of all calls. Each call
record contains the last 20 numbers in its
category.
When in idle status, open the call lists by
selecting the §Calls§ display key or via the
menu:
v¢Ê
36
List entry
New messages are displayed at the top.
Example of list entries:
All Calls
™ Frank
14.10.09, 15:40
š 089563795
14.10.09, 15:32
™ ...0123727859362922
14.10.09, 15:07
View
Options
u List type (in header)
u Status of entry
Bold: New entry
u Number or name of caller
u Date and time of call (if set, page 15)
u Type of entry:
Accepted calls ( › )
Missed calls ( ™ )
Outgoing calls ( š )
Calls recorded by the answering
machine (Ã, Gigaset S795 only)
Press the talk key c to call the selected
caller back.
Press the §View§ display key to access additional information, including for example
the number linked to the name.
Select the §Options§ display key to select the
following options:
Copy to Directory
Copy the number to the directory.
Delete Entry
Delete selected entry.
Delete All
Delete all entries.
–
–
–
–
When you quit the call lists, all entries are
set to the status "old", i.e., the next time
you call up the list, they will no longer be
shown in bold.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / direct_charges.fm / 09.10.2009
Using the directory and lists
Opening lists with the
message key
Use the message key f to open the following list selection:
u Answering machine list (Gigaset S795
only) or network mailbox, if your network provider supports this function
and fast access is set for the network
mailbox (¢ page 52).
u Incoming SMS message list
(¢ page 40)
If multiple mailboxes are set up
(¢ page 42), several lists are displayed.
u List of missed calls
u List of missed alarms (¢ page 37)
An advisory tone sounds as soon as a new
message arrives in a list. The f key
flashes (it goes off when the key is
pressed). In idle status, the display shows
an icon for the new message:
Icon
Ã
™
Ë
New message...
... in the answering machine list
(Gigaset S795 only) or on the network mailbox
... in the missed calls list
... in the SMS list
... in the Missed Alarms list:
The number of new entries is displayed
under the corresponding icon.
Ã
02
œ
10
¾
09
08
Please note
Version 4, 16.09.2005
If calls are saved in the network mailbox, you will receive a message if the
appropriate settings have been made
(see your network provider user
guide).
After pressing the message key f, you
can see all lists containing messages and
the network mailbox list.
Lists containing new messages are at the
top of the list and are marked in a bold
font.
Messages & Calls
Calls:
(3)
Missed Alarms
(1)
SMS:
(2)
Back
OK
Select a list with q. To open, press §OK§.
List of missed alarms
Missed (unacknowledged) appointments
from the calendar (¢ page 54) and anniversaries (¢ page 34) are saved in the
Missed Alarms list under the following
circumstances:
u You do not accept an appointment/
anniversary.
u The appointment/anniversary was signalled during a phone call.
u The handset is deactivated at the time
of the appointment/anniversary.
u Automatic redial was activated at the
time of an appointment/anniversary
(¢ page 35).
u Open the list by pressing the message
key f (¢ page 37).
Each entry is displayed with:
u Number or name
u Date and time
The most recent entry is at the head of the
list.
Press the display key §Delete§, to delete the
selected entry.
If 10 entries are already stored in the list,
the next appointment reminder will delete
the oldest entry.
37
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / direct_charges.fm / 09.10.2009
Making cost-effective calls
Making cost-effective calls
Make phone calls through a network provider who offers particularly low-cost call
rates (call-by-call).
Automatic network provider
code (preselection)
You can store a call-by-call number (preselection number), which is automatically
placed in front of numbers when you dial
them.
In the "With Preselection" list, specify the
access codes or the first digits of the
access codes that you wish to assign to the
preselection number.
In the "No Preselection" list, enter the
exceptions to the "With Preselection" list.
Example:
Preselection No.
0999
With Preselection
08
No Preselection
081
084
All numbers that start with 08, except for
081 and 084, are dialled with the preselection number 0999.
Phone number
07112345678
08912345678
Version 4, 16.09.2005
08412345678
38
¢
¢
¢
Dialled number
07112345678
0999 08912345678
08412345678
• Saving preselection numbers
v ¢ Ï ¢ Telephony ¢ Preselection
¢ Preselection No.
~
§Save§
Enter or change the preselection number (call-by-call
number).
Press the display key.
Save or change entries in the
preselection lists
Each of the two lists can contain 20
entries, each with 6 digits.
Numbers may be prefixed according to the
country in the "With Preselection" list.
This means, for example, that all national
calls or calls to the mobile network are
automatically linked to the preselection
number you have saved previously.
v ¢ Ï ¢ Telephony ¢ Preselection
¢ With Preselection / No Preselection
s
Select entry.
~
Enter or edit the first digits of
the number.
§Save§
Press the display key.
Temporarily cancelling preselection
c (press and hold) ¢ §Options§
¢ Preselection off ¢ ~ (dial number)
Permanently deactivating preselection
v ¢ Ï ¢ Telephony ¢ Preselection
¢ Preselection No.
Ñ
Press and hold the display key
until the preselection number
is deleted.
§Save§
Press the display key.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / sms_BRD_neutral.fm / 09.10.2009
SMS (text messages)
SMS (text messages)
Your phone is delivered ready to send SMS
messages immediately.
Prerequisites:
u Calling Line Identification is enabled for
your phone line.
u Your network provider supports SMS on
the fixed line network (information on
this can be obtained from your network
provider).
u You are registered with your service
provider to send and receive SMS messages.
u To receive SMS messages, you must be
registered with your service provider.
This occurs automatically when you
send your first SMS.
Please note
If your phone is connected to a PABX,
please read ¢ page 44.
Please note
u For instructions on entering text
and special characters, please see
page 76.
u An SMS may contain up to
612 characters. If there are more
than 160 characters, the SMS is
sent as a linked SMS (up to 4 SMS
messages with 153 characters
each). The top right of the display
shows how many characters are still
available and which part of a linked
SMS is currently being written.
Sending an SMS
c
or:
§Options§
Send
SMS
~/s
Writing/sending an SMS
Writing an SMS
v¢Ë
Mailbox 2
~
Version 4, 16.09.2005
New SMS
~
Select mailbox if necessary
and press §OK§.
Enter mailbox PIN if necessary
and press §OK§.
Select and press §OK§.
Write an SMS.
Press the talk key
§Send§
Press the display key.
Select and press §OK§.
Select and press §OK§.
Select number with access
code (even if you are in that
area) from the directory or
enter directly. For sending
SMS messages to an SMS mailbox: add the mailbox ID to the
end of the number.
Press the display key. The SMS
is sent.
Please note
u If you are interrupted by an external
call while writing an SMS, the text is
automatically saved in the draft
SMS list.
u If the memory is full, or if the SMS
function on the base is being used
by another handset, the operation
is cancelled. An appropriate message appears in the display. Delete
SMS messages you no longer
require or send the SMS later.
39
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / sms_BRD_neutral.fm / 09.10.2009
SMS (text messages)
Draft SMS list
You can save an SMS in the draft SMS list,
and edit and send it later.
Saving an SMS in the draft SMS list
¤ You are writing an SMS (¢ page 39).
Press the display key.
Save Entry Select and press §OK§.
§Options§
Opening the draft message list
v ¢ Ë ¢ , if necessary ~
(mailbox, mailbox PIN), ¢ Draft
The first entry in the list is displayed, e.g.:
Saved
14.10.08 15:07
If the entry has been saved with the phone
number, i.e., when the SMS was saved
from the incoming message list, the
number is displayed in the first line.
Reading or deleting SMS messages
¤ Open the draft message list and then:
q
Select SMS.
Press the display key. The text
is displayed. Scroll line by line
using q
or delete the SMS with
§Options§ ¢ Delete Entry ¢ §OK§.
§Read§
Writing/editing an SMS
¤ You are reading an SMS in the draft
SMS list.
Open menu.
You have the following options:
Copy
Send stored SMS.
Edit
Edit the text of the saved SMS and then
send it (¢ page 39).
Character Set
Display text in the selected character
set.
Version 4, 16.09.2005
§Options§
40
Deleting draft SMS list
¤ Open the draft message list and then:
§Options§
Delete All
Open menu.
Select, press §OK§ and confirm
with §Yes§. The list is deleted.
Receiving an SMS
All received SMS messages are saved in
the incoming SMS list. Linked SMS messages are displayed as one message. If this
is too long or is not transferred completely, it is split into individual messages.
Since an SMS remains in the list even after
it has been read, regularly delete SMS
messages from the list.
The display tells you if the SMS memory is
full.
Activating/deactivating first ringtone
muting
Each incoming SMS is signalled by a single
ring (ringtone as for external calls). If you
accept such a "call", the SMS is lost. To prevent this ring, suppress the first ringtone
for all external calls.
v
Open the main menu.
*#Q5# O
Press keys.
Q §OK§ Make the first ringtone audible.
or:
§OK§ Mute the first ringtone.
Incoming message list
The incoming message list contains:
u All received SMS messages, starting
with the most recent.
u SMS messages that could not be sent
due to an error.
New SMS messages are signalled on all
Gigaset S79H handsets by the Ë icon on
the display, the flashing message key f
and an advisory tone.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / sms_BRD_neutral.fm / 09.10.2009
SMS (text messages)
Opening the incoming message list with
the f key
f
Press.
The incoming message list is indicated by
the mailbox name and the number of
entries (example):
SMS:
(2)
Bold: new entries
Normal font: old entries
If necessary select a mailbox and open list
by selecting §OK§ (enter mailbox PIN if
required and confirm by pressing §OK§).
The number and date of receipt are displayed in the entry list.
0123727859362922
14.10.09 09:07
Opening the incoming message list via the
SMS menu
v ¢ Ë ¢ (If necessary, select mailbox,
Changing the character set
¤ Read the SMS
§Options§
Press the display key.
Character Set
Text is shown in the selected character
set.
Replying to or forwarding SMS
messages
¤ Read the SMS
Press the display key.
You have the following options:
Reply
Write and send a new SMS in reply to
the sender (¢ page 39).
Edit
Edit the text in the SMS and return it to
the sender (¢ page 39).
Forward
Forward the SMS to another number
(¢ page 39).
§Options§
enter mailbox PIN) ¢ Incoming
Copying the number to the directory
Deleting the incoming message list
Copying the sender's number
All new and old SMS messages in the list
are deleted.
¤ Open the incoming message list.
§Options§
Open menu.
Delete All Select, press §OK§ and confirm
with §Yes§. The list is deleted.
Reading or deleting SMS messages
¤ Open the incoming message list and
select the SMS (¢ page 40).
§Options§ ¢ Copy to Directory
¤ Complete the entry ¢ page 34.
Please note
An attached mailbox identifier is added
to the directory.
¤ Open the incoming message list, then:
q
Select SMS.
Press the display key. The text
is displayed. Scroll line by line
using q
or delete the SMS with
§Options§ ¢ Delete Entry ¢ §OK§.
After you have read a new SMS, it is given
the status "Old" (is no longer shown in
bold).
Version 4, 16.09.2005
§Read§
41
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / sms_BRD_neutral.fm / 09.10.2009
SMS (text messages)
Copying/dialling numbers from an SMS
¤ Read the SMS and scroll to the tele-
phone number.
The digits are highlighted.
Ó
Press the display key.
Complete the entry (¢ page 34).
or:
c
Press the talk key to dial the
number.
If you wish to use the number to send an
SMS:
¤ Save the number with the local area
code (access code) in the directory.
SMS with vCard
The vCard is an electronic business card. It
is displayed by the Å icon in the body of
the SMS.
A vCard can include:
u Name
u Private number
u Business number
u Mobile phone number
u Birthday
Entries in a vCard can be saved to the
directory individually.
Opening the vCard
¤ Read the SMS containing the vCard.
Press the display key.
To return to the body of the
SMS, press §Back§.
q
Select number.
§Save§
Press the display key.
When you save a number, the directory is
opened automatically. The number and
name are copied. If a birthday is entered
on the vCard, the date is copied to the
directory as an anniversary.
¤ If necessary, edit the entry in the directory and save it. You will return to the
vCard automatically.
Version 4, 16.09.2005
§View§
42
• Notification via SMS
You can be notified about missed calls or
new answering machine messages
(Gigaset S795 only) via SMS.
Prerequisite: For missed calls, the caller's
number (CLI) must have been transmitted.
Notification is sent to your mobile phone
or another phone with SMS functionality.
You only need to save the telephone
number to which you wish the notification
to be sent.
v ¢ Ë ¢ Settings ¢ Notification
¤ You can enter data in the following
fields:
To:
Enter the number to which the SMS
should be sent.
On missed call
Select On if you require SMS notification.
On message on answer machine
(Gigaset S795 only)
Select On if you require SMS notification.
§Save§
Press the display key.
Warning
Do not enter your own fixed line network number for the notification of
missed calls. This can lead to chargeable endless looping.
SMS mailboxes
The general mailbox is the default setting. Anyone can access this mailbox and
it cannot be protected by a PIN. You can
set up three additional personal mailboxes and protect these with a PIN. Each
mailbox is identified by a name and a
"mailbox ID" (a kind of extension number).
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / sms_BRD_neutral.fm / 09.10.2009
SMS (text messages)
Please note:
u If you operate a number of devices
(bases) with SMS functionality on a single phone line, then each SMS mailbox
ID may only occur once. In this case,
you must also change the preset ID of
the general mailbox ("0").
u Only use personal mailboxes if your
service provider supports this function.
You can tell whether this is the case by
the addition of a star (*) to the number
of a (preset) SMS centre.
u If you have forgotten your mailbox PIN,
you can reset it by restoring the base's
default settings. This will delete all
SMS messages from all mailboxes.
•
Setting up and editing a personal
mailbox
Setting up a personal mailbox
v ¢ Ë ¢ Settings ¢ SMS Mailboxes
s
Version 4, 16.09.2005
Select mailbox, e.g., Mailbox 2
and press §Edit§.
¤ You can enter data in the following
fields:
Activation:
Activate or deactivate mailbox.
Name:
Enter name.
Box ID:
Select mailbox ID (0–9). You can only
select the available numbers.
Protection:
Activate/deactivate PIN protection.
SMS PIN
If necessary, enter 4-digit PIN.
§Save§
Press the display key.
Active mailboxes are marked with μ in
the mailbox list. They are shown in the
SMS list and can, if necessary, be displayed
by pressing the message key f.
Deactivating a mailbox
¤ Set Activation to Off. Confirm message
with §Yes§ if necessary.
All SMS messages saved in this mailbox
are deleted.
Deactivating PIN protection
¤ Set Protection to Off.
The mailbox PIN is reset to "0000".
Changing the name of a mailbox
v ¢ Ë ¢ Settings ¢ SMS Mailboxes
¢ s (Select mailbox)
§Edit§
~
§Save§
Press the display key.
Enter new name.
Press the display key.
Changing a mailbox's PIN and ID
v ¢ Ë ¢ Settings ¢ SMS Mailboxes
¢ s (Select mailbox)
~
¤
Enter mailbox PIN if necessary
and press §OK§.
Set Box ID, Protection and SMS PIN
(¢ page 43).
Sending an SMS to a personal mailbox
To send an SMS to a personal mailbox, the
sender must know your ID and enter it
after your number.
¤ You can send your SMS contact an SMS
via your personal mailbox.
Along with this SMS, your SMS contact will
receive your SMS number with current ID
and can save it in their directory. If the ID
is invalid, the SMS will not be delivered.
Setting SMS centres
SMS messages are exchanged between
SMS centres operated by service providers. You must enter the SMS centre
through which you wish to send and
receive SMS messages into your phone.
You can receive SMS messages from every
SMS centre that is entered, provided you
have registered with your service provider.
Your SMS messages are sent via the SMS
centre that is entered as the active send
service centre (¢ page 44). Only one
43
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / sms_BRD_neutral.fm / 09.10.2009
SMS (text messages)
SMS centre can be the active send service
centre at any one time.
If no SMS service centre is entered,
the SMS menu only contains the entry
Settings. Enter an SMS Service Centre
(¢ page 43).
• Entering/changing SMS centres
¤ Find out about the services and special
functions offered by your service provider before you make a new application and/or before you delete pre-configured call numbers.
v ¢ Ë ¢ Settings ¢ Service Centres
s
Select SMS centre (e.g.,
Service Centr.1) and press §Edit§.
¤ You can enter data in the following
fields:
Active Send:
Select §Yes§ if SMS messages are to be
sent via the SMS centre.
SMS Service Centre no.:
Enter the number of the SMS service
and insert a star if your service provider
supports personal mailboxes.
Send e-mail to:
Enter the number of the e-mail service.
§Save§
Press the display key.
Please note
Ask your service provider for details on
entering service numbers if you wish
to use personal mailboxes (prerequisite: your service provider supports this
function).
Sending an SMS via another SMS
centre
¤ Activate the SMS centre (2 to 4) as the
active send service centre.
Version 4, 16.09.2005
¤ Send the SMS.
44
SMS on a PABX
u You can only receive an SMS when the
Calling Line Identification is forwarded to the extension of the PABX
(CLIP). The CLIP evaluation of the SMS
centre number is completed in your
Gigaset.
u Depending on your PABX, you may
have to add the access code (external
line prefix) before the number of the
SMS centre.
If in doubt, test your PABX, e.g., by
sending an SMS to your own number:
once with and once without the access
code.
u When you send SMS messages, your
sender number may be sent without
your extension number. In this case,
the recipient cannot reply to you
directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base.
Activating/deactivating
SMS function
If you deactivate the SMS function, you
cannot send or receive any SMS messages
with your phone.
The settings you have made for sending
and receiving SMS messages (e.g., the
numbers of the SMS centres) and the
entries in the incoming and draft message
lists are saved even after deactivation.
v
Open the main menu.
*#Q5# 2 L
Enter the digits.
Q §OK§ Deactivate the SMS function.
or:
§OK§ Activate the SMS function
(default setting).
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / sms_BRD_neutral.fm / 09.10.2009
SMS (text messages)
SMS troubleshooting
The SMS is played back.
Error codes when sending
E0 Calling Line Identification permanently
withheld (CLIR) or Calling Line Identification not activated.
FE Error occurred during SMS transfer.
FD Connection to SMS centre failed; see selfhelp.
1. The "display call number" feature is not activated.
Ask your service provider to activate this
function (chargeable).
¥
2. No agreement is in place between your
mobile phone operator and your fixed line
network SMS service provider.
Obtain information from your fixed line
network SMS service provider.
¥
The following table lists problem situations and possible causes and provides
advice on troubleshooting.
3. Your terminal has been recorded by your
SMS provider as having no fixed line network SMS functionality, i.e., you are not registered with the provider.
Send any SMS to automatically register
your telephone to receive SMS.
You cannot send messages.
Messages are only received during the day.
Self-help with errors
1. You have not requested the CLIP service
(Calling Line Identification Presentation).
Ask your service provider to enable this
service.
¥
2. SMS transmission has been interrupted
(e.g., by a call).
Re-send the SMS.
¥
¥
The terminal is recorded in your SMS provider's database as having no fixed line network SMS functionality, i.e., you are not registered with the provider.
Obtain information from your fixed line
network SMS service provider.
Send any SMS to automatically register
your telephone to receive SMS.
¥
¥
3. The network provider does not support this
feature.
4. No number or an invalid number is entered
for the SMS centre set as the active send
service centre.
Enter the number (
page 43).
¥
¢
You receive an incomplete SMS.
1. Your phone's memory is full.
Delete old SMS messages (
¥
¢ page 40).
2. The service provider has not yet sent the
rest of the SMS.
You have stopped receiving SMS messages.
1. You have changed the ID of your mailbox.
Give your SMS contacts your new ID or
undo the change (
page 43).
¥
¢
2. You have not activated your mailbox.
Activate your mailbox (
page 43).
Version 4, 16.09.2005
¥
¢
3. Call divert (redirecting) is set to When: All
Calls or All Calls is activated for the network
mailbox.
Change the call divert settings
(
page 31).
¥
¢
45
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / answering_m.fm / 09.10.2009
Operating the Gigaset S795 base answering machine
Operating the Gigaset S795
base answering machine
You can access the answering machine via
the handset, the buttons on the base
(¢ page 4) or by remote operation (from
another phone/mobile phone). You can
record your own announcement message
or advisory message via the handset.
Answering machine mode
You can use the answering machine in
two different modes.
u In Answer & record mode, the caller
hears the announcement and can then
leave a message.
u In Answer only mode, the caller hears
your announcement but cannot leave a
message.
Operating via the handset
The handset loudspeaker activates automatically if you receive an acoustic
prompt or message while operating. You
can switch it off with the speaker key d.
Version 4, 16.09.2005
Activating/deactivating and setting the
answering machine mode
You can choose between Answer & record,
Answer only and Alternating. By using the
Alternating setting, you can activate
answer and record mode for a set period
of time, outside this period the caller will
only hear the announcement.
v ¢ Ì ¢ Activation (μ= on)
§Edit§
Press the display key.
¤ You can enter data in the following
fields:
Activation:
Select On or Off to activate/deactivate
the answering machine.
• Mode:
Select Answer & record, Answer only or
Alternating.
46
If Alternating mode is selected:
Record from:
Enter hours/minutes for the start of
the period in 4-digit format.
(The time must be set on the phone
beforehand.)
Record until:
Enter hours/minutes for the end of
the period in 4-digit format.
If Answer & record is not set, Answer only
mode applies.
§Save§
Press the display key.
If the messages memory is full and Activation: On has been selected, saving is interrupted and you will receive an instruction
to delete old messages.
When you switch the answering machine
on, the remaining memory time is
announced. If the time has not yet been
set, an appropriate announcement is
made (set time ¢ page 15). The à icon
appears in the display. The LED display on
the base lights up (¢ page 4).
The phone is supplied with pre-recorded
announcements for Answer & record mode
and for Announce only mode. If a personal
announcement has not been recorded,
the relevant pre-recorded announcement
is used.
Recording personal announcements/
• advisory messages
v ¢ Ì ¢ Announcements
¢ Rec. Announcement / Rec. Advisory Msg.
§OK§
Press the display key to start
the recording.
You hear the ready tone (short tone).
¤ Now speak your announcement (at
least 3 secs.).
§End§
Press the display key to end
the recording.
Cancel recording with a or §Back§. Restart
the recording with §OK§.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / answering_m.fm / 09.10.2009
Operating the Gigaset S795 base answering machine
After recording, the announcement is
played back for you to check. You can rerecord the announcement with §New§.
Please note:
u Recording ends automatically if the
maximum recording time of 170 seconds is exceeded or there is a break in
speech for more than 2 seconds.
u If you cancel the recording, the prerecorded announcement is used again.
u If the answering machine's memory is
full, it will switch to Answer only mode.
¤ Delete old messages and the
answering machine will automatically switch back to Answer & record
mode. Repeat recording if required.
Playing back personal
announcements/ • advisory
messages
v ¢ Ì ¢ Announcements
¢ Play Announcement / Play Advisory Msg.
If you have not recorded a personal
announcement, the relevant pre-recorded
announcement is played.
Version 4, 16.09.2005
Record a new announcement while playing back the announcement:
§New§
Press the display key.
If the answering machine's memory is full,
it will switch to Answer only mode.
¤ Delete old messages and the answering
machine will automatically switch back
to Answer & record mode. Repeat recording if required.
Deleting personal announcements/
• advisory messages
v ¢ Ì ¢ Announcements
¢ Del. Announcement / Del. Advisory Msg.
§Yes§
Press the display key to confirm the prompt.
Once you have deleted your announcement, the relevant pre-recorded
announcement is used again.
Please note
Deleting announcements can take
some time.
Playing back messages
The date and time of each message is
logged (provided this has been set,
¢ page 15) and displayed during the
playback. If Calling Line Identification is
activated, the caller's number is displayed. If the caller's number is saved in
the directory, their name is displayed.
Playing back new messages
New messages that have not yet been
played back are indicated on the display
with an icon and number:
Ã
02
The f key on the handset and the display
on the base will flash. The number of new
messages is displayed on the base.
f
Press the message key.
Answer. Mach.:
Select and press §OK§.
If there are new messages, playback then
begins with the first new message. After
the last new message, you will hear the
end tone and an announcement stating
how much recording time remains.
If the message has been saved with the
date and time, you will hear an appropriate announcement before playback
begins.
47
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / answering_m.fm / 09.10.2009
Operating the Gigaset S795 base answering machine
Playing back old messages
You can listen to old messages if there are
no more new messages. Begin playback as
described under "Playing back new messages".
After the entry time and date have been
played back (after approx. 3 seconds) a
new message assumes the status "old".
Stopping and controlling playback
During message playback:
2
Pause playback. Press 2
again to resume.
or
§Options§
Open menu.
Pause
Select and press §OK§.
To continue select Continue
and press §OK§.
t or Go to the start of the current
message.
Press twice to go back to the
previous message.
s or 3
Skip to next message.
Press twice to skip ahead two
messages.
If playback is interrupted for over a
minute, the answering machine returns to
idle status.
Marking a message as "new"
Version 4, 16.09.2005
A previously played back "old" message is
displayed as a "new" message again.
During message playback:
*
Press the star key.
or:
§Options§
Open menu.
Mark as New
Select and press §OK§.
48
An announcement informs you of the
message's new status.
Playback of the current message is cancelled. Playback of next message starts, if
applicable.
The f key on the handset flashes.
Copying a phone number from a message
to the directory
During playback or pause:
§Options§ ¢ Copy to Directory
¤ Complete the entry (¢ page 34).
Deleting messages
You can either delete all old messages
together or individually.
Deleting all old messages
During playback or pause:
§Options§ ¢ Delete Old List
§OK§
Press the display key to confirm the prompt.
§Yes§
Press the display key to confirm the prompt.
Deleting individual old messages
During playback or pause:
§Delete§
Press the display key.
Picking up a call from the answering
machine
You can pick up a call while the answering
machine is recording or is being operated
via remote operation:
c / §Accept§
Press the talk or display key.
Recording stops and you can speak to the
caller.
If two seconds of the call have already
been recorded when you pick it up, the
call is displayed as a new message. The f
key on the handset flashes.
You can answer the call, even if it is not
signalled on the handset.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / answering_m.fm / 09.10.2009
Operating the Gigaset S795 base answering machine
Version 4, 16.09.2005
Diverting an external call to the
answering machine
• Activating/deactivating call
screening
You can divert an incoming external call to
the answering machine, even if it is deactivated.
Prerequisite: Sufficient memory space is
available on the answering machine.
An external call is signalled on the handset:
Ô
Select display key.
The answering machine starts immediately in Answer & record mode and records
the call. The set time for ring delay
(¢ page 49) is ignored.
v ¢ Ì ¢ Call Screening
¢ Handset / Base (³= on)
§Change§
Select display key to activate/
deactivate the function.
Call screening can be simultaneously activated on the base and handset.
Activating/deactivating two-way
record
Deactivating call screening for the current
recording
You can record an external call with the
answering machine.
¤ Inform the caller that the call is being
recorded.
§Options§
Open menu.
Two-way Record
Select and press §OK§.
Two-way record is indicated on the display
by an advisory text and is added to the
answering machine list as a new message.
§End§
Press the display key to stop
two-way record.
The maximum recording time depends on
the memory available on the answering
machine. If the memory is full, you will
hear an end tone, the recording is
aborted, and the call recorded up to that
point is listed in the answering machine
list as a new message.
You can deactivate the function for your
own handset during the recording.
§Silence§
Press the display key.
While a message is recording, you can
screen calls via the base loudspeaker and
registered handsets.
Permanently activating/deactivating call
screening
• Setting the recording
parameters
The answering machine has already been
preset at the factory. Individual settings
can be adjusted using the handset.
v ¢ Ì ¢ Recordings
¤ You can enter data in the following
fields:
Length:
Select maximum recording time 1 min.,
2 min., 3 min. or Maximum.
Quality:
Select Long Play or High recording quality. If the quality is higher, the maximum recording time is reduced.
Ring Delay:
Select when the answering machine
should accept a call:
Immediately, after 10 sec., 18 sec., 30 sec.
or Automatic.
§Save§
Press the display key.
49
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / answering_m.fm / 09.10.2009
Operating the Gigaset S795 base answering machine
Information about ring delay
In Automatic mode, the following applies
for ring delay:
u If there are no new messages, the
answering machine answers a call after
18 seconds.
u If there are new messages, the answering machine answers a call after
10 seconds.
When operating remotely (¢ page 50),
you can tell after approx. 15 seconds that
there are no new messages (otherwise the
answering machine would have already
accepted your call). There are no call
charges if you hang up now.
Please note:
You can configure your telephone so that
the first ring is suppressed on all calls
(¢ page 40). This means that the time
selected for the ring delay predetermines
how long the caller must wait before the
answering machine accepts the call.
• Resetting fast access for the
answering machine using key 1
By default, key has been assigned for
fast access to the integrated answering
machine. However, if you have set the network mailbox for fast access (¢ page 52),
you can reset this setting.
v ¢ Ì ¢ Set Key 1
Version 4, 16.09.2005
Answering Machine
Select and press §OK§.
Once you have selected the answering
machine, press and hold key . You are
connected directly.
The setting for fast access applies to all
registered handsets.
50
Operating when on the move
(remote operation)
You can check and activate your answering machine from any other telephone
(hotel, pay phone etc.), or initiate ringback from the answering machine with an
SMS.
Prerequisites:
u You have set a system PIN other than
0000 (¢ page 68).
u The phone you are using for remote
operation has tone dialling (DTMF),
i.e., you hear different tones when you
press the keys. Alternatively, you can
use a code transmitter (available from
your mobile phone retailer).
Calling the answering machine and
playing back messages
~
9~
Dial your own number.
When you hear your
announcement, press 9 and
enter the system PIN.
You are informed whether any new messages have been recorded. The messages
are now played back. You can now operate
the answering machine with the keypad.
The following keys are used for operation:
A
To return to the start of the
current message.
Press twice to go back to the
previous message.
B
Stop playback. Press again to
resume.
3
Go to the next message.
0
Delete current message.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / answering_m.fm / 09.10.2009
Operating the Gigaset S795 base answering machine
Activating the answering machine
¤ Phone home and let the phone ring
until you hear: "Please enter PIN".
~
Enter system PIN.
Your answering machine is activated. It
tells you how much memory time is left.
The messages are now played back.
The answering machine cannot be deactivated remotely.
Initiating ringback from the answering
machine with SMS and listening to
messages
Version 4, 16.09.2005
Prerequisite: You must have stored an
SMS notification number (¢ page 42).
You can use the telephone (mobile phone
or any other device with SMS functionality) for which you have stored the SMS
notification number in your phone to send
an SMS to your answering machine when
you are away from home. It will then call
you back. The message playback begins
when you accept the call and press any
digit key.
The SMS must contain the following:
*<System PIN>*<Ringback number>*
The ringback number is optional.
Examples:
*4711* or *4711*089123456*
If a ringback number is entered, it is
dialled; otherwise the SMS notification
number is dialled.
You can now operate the answering
machine via the keypad, as described in
the previous sections.
51
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / T-NetBox_SAG.fm / 09.10.2009
Using the network mailbox
Using the network mailbox
Calling the network mailbox
The network mailbox is your network provider's answering machine within the network. You cannot use the network mailbox unless you have requested it from
your network provider.
d
• Configuring fast access for
the network mailbox
Press and hold. You are connected straight to the network
mailbox.
Press speaker key d if
required. You will hear the network mailbox announcement.
Viewing the network mailbox
message
With fast access, you can dial the network
mailbox or the integrated answering
machine (Gigaset S795 only) directly.
Gigaset S790: Fast access is preset for the
network mailbox. You only need to enter
the number of the network mailbox.
Gigaset S795: The integrated answering
machine is preset for fast access. You can
configure the network mailbox instead.
Ask your network provider about this.
When a message is recorded, you receive
a call from the network mailbox. If you
have requested Calling Line Identification,
the network mailbox number is displayed.
If you accept the call, the new messages
are played back. If you do not accept the
call, the network mailbox number is saved
in the missed call list and the message key
flashes (¢ page 37).
Configuring fast access for the network
mailbox and entering the network mailbox
number
Enter the network mailbox phone
number into your directory along with
the designation "Network mailbox";
the display and the call list will then
show this designation.
Gigaset S790:
v ¢ Ì ¢ Set Key 1
Network Mailbox
Select and press §Network Mailbox§
(Ø Select= selected).
Gigaset S795:
v ¢ Ì ¢ Network Mailbox
To continue:
~
Enter the number for the network mailbox.
§Save§
Press the display key.
The setting for fast access applies to all
Gigaset S79H handsets.
Version 4, 16.09.2005
52
Please note
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
ECO DECT
ECO DECT
You are helping to protect the environment with your Gigaset S790/S795.
Reducing energy consumption
By using a power-saving adapter plug,
your telephone consumes less power.
Reducing radiation
The radiation from your telephone is
reduced automatically:
u The handset's transmission power is
reduced depending on the distance to
the base.
u The transmission power on the base is
reduced to virtually zero when only one
handset is registered and the handset is
placed in the base.
You can reduce the radiation from the
handset and base even more by using Eco
Mode or Eco Mode+.
u Eco Mode
reduces the base's transmission power
by 80% in standby and talk mode.
u Eco Mode+
reduces the base and handset's transmission power by 100% when the
phone is not being used to make or
receive a call.
Eco Mode / Eco Mode+ can be activated/
deactivated independently of one another
and can also be used with multiple handsets. The handset must not be placed in
the base.
Activate/deactivate Eco Mode /Eco Mode+:
Version 4, 16.09.2005
v ¢ Ï ¢ Eco Mode
¢ Eco Mode / Eco Mode+
§Change§
Press the display key
(³ = on).
Status displays
Display icon
Ð i Ñ Ò
| (flashes)
Ð white
Ð green
¼ white
¼ green
Signal strength:
– good to poor
– no signal
Eco Mode deactivated
Eco Mode activated
Eco Mode+ activated
(displayed instead of the
reception strength icon
when in idle status)
Eco Mode and Eco
Mode+ activated
Please note
u With Eco Mode+ activated, press
u
u
u
u
and hold the talk key c to check
that the base can be reached. You
will hear the dialling tone if the base
can be reached.
When Eco Mode+ is activated:
– Call setup is delayed by approx.
two seconds.
– Handset standby time is reduced
by approx. 50%.
Registering handsets that do not
support Eco Mode+ will cause the
mode to be deactivated on the base
and all other handsets.
Activating Eco Mode reduces the
range of the base.
Eco Mode / Eco Mode+ and
repeater support (¢ page 67) cancel each other out, i.e., if you use a
repeater, you cannot use Eco Mode
or Eco Mode+.
53
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Setting an appointment (calendar)
Setting an appointment
(calendar)
You can use your handset to remind yourself of up to 30 appointments. Anniversaries (¢ page 34) entered in the directory
are automatically recorded in the calendar.
Saving an appointment.
Prerequisite: The date and time have
already been set (¢ page 15).
v ¢ Í ¢ Calendar
Oct 2009
Mo
Tu
We
Th
Fr
Sa
Su
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Back
Options
u The current day is selected (highlighted
in white).
Version 4, 16.09.2005
u Days on which appointments have
already been saved are highlighted in
white.
r/q
Select the required day in the
graphical calendar.
The selected day is highlighted in white.
The current day is no longer highlighted.
w
Press the centre of the control
key.
u If appointments have already been
entered, this will open the list of saved
appointments on that day.
Select <New Entry> ¢ §OK§ to open the
data input window.
u If no appointments have been entered,
the data input window will open immediately to add the new appointment.
¤ You can enter data in the following
fields:
54
Activation:
Select On or Off.
Date:
Enter day/month/year in 8-digit format.
Time:
Enter hours/minutes in 4-digit format.
Text:
Enter text (max. of 16 characters). The
text appears as the appointment name
in the list and is displayed on the screen
during the appointment reminder. If
you do not enter any text, only the date
and time of the appointment are displayed.
Signal:
Select the reminder type.
§Save§
Press the display key.
Please note
If you have already saved thirty
appointments, you will have to first
delete an existing appointment before
adding a new one.
Signalling appointments and
anniversaries
An appointment reminder is signalled in
idle status for 60 seconds with the
selected ringtone at the volume that has
been set for internal calls (¢ page 64).
During the reminder call, you can permanently change the volume by pressing
the side keys ø (louder) or ÷ (quieter).
The name is displayed for anniversaries,
while the entered text is displayed for
appointments along with the date and
time.
ØáÚ
Meeting
03.11.09 15:38
Off
SMS
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Setting an appointment (calendar)
You can either deactivate or answer an
appointment reminder:
§§Off§§
Press the display key to deactivate the appointment
reminder.
or:
§SMS
Press the display key to
respond to the appointment
reminder with an SMS.
Please note
During a call, the appointment
reminder is signalled by a short tone.
Managing appointments
v ¢ Í ¢ Calendar
Editing individual appointments
r/q
Select a day in the graphical
calendar and press the control
key w. (Days on which
appointments have already
been saved are highlighted in
white in the calendar).
q
Select appointment for the
day.
You have the following options:
§§View§§
Press the display key and edit
or confirm the entry.
or
§Options§
Open the menu for editing,
deleting and activating/deactivating.
Deleting all appointments
§Options
¢ Delete all ¢ §OK§
Version 4, 16.09.2005
Confirm the security prompt with §Yes§.
All appointments are deleted.
Displaying missed
appointments, anniversaries
Missed appointments/anniversaries
(¢ page 34) are displayed in the Missed
Alarms list if:
u You do not accept an appointment/
anniversary.
u The appointment/anniversary was signalled during a phone call.
u The handset is deactivated at the time
of the appointment/anniversary.
u Automatic redial was activated at the
time of an appointment/anniversary
(¢ page 35).
The icon n and the number of new
entries are shown in the display. The most
recent entry is at the head of the list.
Open the list by pressing the message key
f (¢ page 37) or via the menu:
v ¢ Í ¢ Missed Alarms
Select appointment/anniversary.
Information about the
appointment/anniversary is
displayed. A missed appointment is displayed with the
appointment name and a
missed anniversary is displayed with the last name and
first name. The date and time
will also be given.
§Delete§
Delete appointment.
§SMS§
Write an SMS.
If 10 entries are already stored in the list,
the next appointment reminder will delete
the oldest entry.
55
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Setting the alarm clock
Setting the alarm clock
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Prerequisite: The date and time have
already been set (¢ page 15).
Prerequisite: A wake-up call is sounding.
§OFF§
Press the display key. The
wake-up call is deactivated.
or
§Snooze§
Press the display key or any
key. The wake-up call is deactivated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Activating/deactivating and setting the
alarm clock
Version 4, 16.09.2005
v ¢ á ¢ Alarm Clock
¤ You can enter data in the following
fields:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
How often:
Select Daily or Monday-Friday.
Volume:
Set the volume (1–6).
Melody:
Select melody.
§Save§
Press the display key.
In idle status, the ¼ icon and wake-up
time are displayed.
A wake-up call is signalled on the display
and with the selected ringtone
(¢ page 3). The wake-up call sounds for
60 seconds. If no key is pressed, the wakeup call is repeated twice at five minute
intervals and then switched off.
While the wake-up call sounds, you can
permanently change the volume by pressing the side keys ø (louder) or ÷ (quieter).
During a call, the wake-up call is only signalled by a short tone.
56
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Using multiple handsets
Using multiple handsets
Registering other handsets
Registering handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows. .
You can register up to six handsets to your
base.
A Gigaset S79H handset can be registered
on up to four bases.
1) On the handset
Manually registering a Gigaset S79H to
a Gigaset S790/S795
Press and hold the registration/paging
key on the base (¢ page 4) (approx. 3
sec.).
You must activate manual registration of
the handset on both the handset (1) and
the base (2).
When the registration process has completed successfully, the handset returns to
idle status. The handset's internal number
is shown in the display e.g., INT 1. If not,
repeat the procedure. .
1) On the handset
The handset is not registered to a base.
§Register§
Press the display key.
The handset is already registered to a
base:
v ¢ Ï ¢ Registration
¢ Register Handset
If the handset is already registered to
four bases:
s
Select base, e.g., Base 3 and
press §OK§.
~
If required, enter the system
PIN for the base and press
§OK§.
A message appears stating that the
handset is searching for a base that is
ready for registration.
Version 4, 16.09.2005
2) On the base
Within 60 seconds press and hold the
registration/paging key on the base
(¢ page 4) (approx. 3 seconds).
Start to register the handset as described
in its user guide.
2) On the base
De-registering handsets
You can de-register any other registered
handset from any registered Gigaset S79H
handset.
v ¢ Ï ¢ Registration
¢ De-reg. Handset
s
Select the internal subscriber
you wish to de-register and
press §OK§.
(The handset you are currently
using is highlighted with <).
~
Enter the current system PIN
and press §Save§.
§Yes§
Press the display key.
Locating a handset ("Paging")
You can locate your handset using the
base.
¤ Briefly press the registration/paging
key on the base (¢ page 4).
¤ All handsets will ring simultaneously
("paging"), even if the ringtones are
deactivated.
Ending paging
¤ Briefly press the registration/paging
key on the base or press the talk key c
on the handset.
57
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Using multiple handsets
Changing the base
If your handset is registered to more than
one base, you can set it to a particular
base or to the base that has the best
reception (Best Base).
v ¢ Ï ¢ Registration ¢ Select Base
s
Select one of the registered
bases or Best Base and press
§Select§.
Making internal calls
Internal calls to other handsets registered
on the same base are free.
Calling a specific handset
u
~
or:
u
s
c
Initiate internal call.
Enter the number of the handset.
Initiate internal call.
Select handset.
Press the talk key.
Calling all handsets ("group call")
u
or:
u
*
Press and hold.
Initiate internal call.
Press the star key.
or
Call All
Select
c
Press the talk key.
All handsets are called.
Ending a call
a
Press the end call key.
Version 4, 16.09.2005
Transferring a call to another handset
You can transfer an external call to
another handset (connect).
u
Open the list of handsets.
The external participant hears
music on hold, if activated
(¢ page 67).
58
s
Select a handset or Call All and
press §OK§.
When the internal participant answers:
¤ If necessary, announce the external
call.
a
Press the end call key.
The external call is transferred to the other
handset.
If the internal participant does not answer
or the line is busy, press the display key
§End§ to return to the external call.
When transferring a call, you can also
press the end call key a before the internal participant answers.
Then, if the internal participant does not
answer or the line is busy, the call will
automatically return to you.
Internal consultation/conference calls
When you are conducting an external
call, you can call an internal participant at
the same time for consultation or hold a
conference call between all 3 participants.
You are conducting an external call:
u
Open the list of handsets.
The external participant hears
music on hold, if activated
(¢ page 67).
s
Select handset and press §OK§.
The internal participant is
called.
If the participant picks up, you can either:
§End§
Press the display key.
You are reconnected with the
external participant.
or:
§Conference§ Press the display key.
All 3 participants are connected with each other.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Using multiple handsets
Please note
u If only two handsets are registered,
the other handset is called immediately by pressing the u key.
u Pressing and holding the u key
calls all handsets immediately.
Ending a conference call
a
Press the end call key.
If an internal participant presses the end
call key a, the other handset remains
connected to the external participant.
Accepting/rejecting call waiting
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). With Calling Line Identification, the caller's number will appear in
the display.
Ending an internal call, accepting an
external call
Press the display key.
The internal call is ended. You are connected to the external caller.
§Accept§
Rejecting the external call
Press the display key.
The call waiting tone is turned off. You
remain connected to the internal participant. The ringtone can still be heard on
other registered handsets.
§Reject§
Listening in to an external call
Version 4, 16.09.2005
Prerequisite: The Listening In function
must be activated.
You are conducting an external call. An
internal participant can listen in on this
call and take part in the conversation. All
the participants are made aware of additional listeners by a signal tone.
• Activating/deactivating
listening in
v ¢ Ï ¢ Telephony ¢ Listening In
Press §Change§ to activate/deactivate the
function (³ = on).
Internal listening in
The line is engaged with an external call.
Your screen will display information to
that effect. To listen in to the external call.
c
Press and hold the talk key.
You can listen in to the call. All participants
hear a signal tone. During this time, this
handset displays the Conference message
and it is not possible to dial another
number from this handset.
Ending listening in
a
Press the end call key.
All participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has "listened in" remains connected to the external participant.
Changing the name of a handset
The names "INT 1", "INT 2" etc. are
assigned automatically on registration.
You can change these names. The name
must be no more than 10 characters. The
changed name is displayed in every handset's list.
u
Open the list of handsets. Your
own handset is indicated by f.
s
Select handset.
§Options§
Open menu.
Rename
~
Enter name.
§Save§
Press the display key.
59
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Using a handset as a room monitor
Changing a handset's internal
number
A handset is automatically assigned the
lowest free number when it is registered.
If all slots are occupied, number 6 is overwritten if this handset is in idle status. You
can change the internal number of all registered handsets (1–6).
u
Open the list of handsets. Your
own handset is indicated by f.
§Options§
Open menu.
Assign Handset No.
Select and press §OK§.
r
Select number. Only numbers
that have not been assigned
are displayed.
§Save§
Press the display key to save
the input.
Version 4, 16.09.2005
Using a handset as a
room monitor
If the room monitor is activated, a previously saved destination number is called
as soon as a set noise level is reached. You
can save an internal or external number in
your handset as the destination number.
All of the handset keys are deactivated,
with the exception of the display keys.
The room monitor call to an external
number is terminated after approximately
90 seconds. The room monitor call to an
internal number (handset) is terminated
after approximately 3 minutes (depending
on the base). When the room monitor is
activated, all keys are locked except the
end call key. The handset's speaker is
muted.
When the room monitor is activated,
incoming calls to the handset are indicated without a ringtone and are only
shown on the screen. The display and keypad are not illuminated and advisory
tones are also turned off.
60
If you accept an incoming call, the room
monitor is suspended for the duration of
the call, but the function remains activated.
If you deactivate then reactivate the handset, the room monitor remains activated.
Warning!
u Always check the operation of the
room monitor before use. For
example, test its sensitivity.
Check the connection if you are
diverting the room monitor to an
external number.
u When the function is switched on,
the handset's operating time is considerably reduced. If necessary,
place the handset in the base/
charger. This ensures that the battery does not run down.
u Ideally the handset should be positioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.
Activating the room monitor and
entering the destination number
v ¢ É ¢ Room Monitor
¤ You can enter data in the following
fields:
Activation:
Select On to activate.
Alarm to:
Select Internal or External.
External number: Select the number
from the directory (press display key
ö) or enter it manually.
Internal number: Select display key
§Change§ ¢ . Select handset or Call All to
call all registered handsets ¢ §OK§.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Handset settings
In idle status, the destination number
or the internal destination number is
displayed.
Sensitivity:
Select noise level sensitivity (Low or
High).
¤ Press §Save§ to save the settings.
When the room monitor function is activated, the idle display appears as shown
below:
i
Ã
INT 1
V
07:15
Á
22 Oct
Room Monitor
0891234567
OFF
Options
Changing the set destination number
v ¢ É ¢ Room Monitor
¤ Enter and save number as described in
"Activating the room monitor and
entering the destination number"
(¢ page 60).
Cancel/deactivate room monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle status, press the display key §OFF§ to
deactivate room monitor mode.
Version 4, 16.09.2005
Deactivating the room monitor
remotely
Prerequisites: The phone must support
tone dialling and the room monitor should
be set for an external destination number.
¤ Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There are no further
room monitor calls. The other room moni-
tor settings on the handset (e.g., no ringtone) will remain activated until you press
the display key §OFF§ on the handset.
To reactivate the room function with the
same phone number:
¤ Turn on the activation again and save
with §Save§ (¢ page 60).
Handset settings
Your handset is preconfigured, but you
can change the settings to suit your individual requirements.
Quick access to numbers and
functions
You can assign a number from the directory to each of the digit keys Q and
2 to O.
The left and right display keys have a
default function. You can change the
assignment (¢ page 62).
The number is then dialled or the function
started by simply pressing a key.
Assigning digit keys
Prerequisite: You have not yet assigned a
number to the digit key.
¤ Press and hold the digit key
or
Press the digit key briefly and press the
display key §QuickDial§.
The directory opens.
¤ Select an entry and press §OK§.
The entry is saved to the corresponding
digit key.
Please note
If you delete or edit the entry in the
directory at a later date, this will not
affect the assignment to the number
key.
61
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Handset settings
Selecting numbers/changing an
assignment
Prerequisite: The digit key already has a
number assigned to it.
When the handset is in idle status
¤ Press and hold the digit key:
The number is dialled immediately.
or
¤ Briefly press the digit key.
Press the display key with the number/
name (abbreviated if necessary) to
select the number or
press the display key §Change§ to change
the assignment or to delete the assignment.
Changing display key assignments
Version 4, 16.09.2005
¤ Press and hold the left or right side of
the display key.
The list of possible key assignments is
opened. The following can be selected:
Room Monitor
Assign menu for setting and activating
the room monitor to a key
(¢ page 60).
Alarm Clock
Assign menu for setting and activating
the alarm clock to a key (¢ page 56).
Calendar
Display graphical calendar
(¢ page 54).
Redial
Display the redial list.
More Functions...
More features are available:
Call Lists
Display call lists (¢ page 36).
INT
Internal calls (¢ page 58).
SMS
Assign menu for SMS functions to a
key (¢ page 39).
Withhold Number
Withhold Calling Line Identification
for the next call (¢ page 30).
¤ Select an entry and press §OK§.
62
Changing the display language
You can view the display texts in different
languages.
v ¢ Ï ¢ Language
The current language is indicated by a Ø.
s
Select language and
press §Select§.
If you accidentally choose a language you
do not understand:
v ¢Ï¢ s¢ s¢ s
Press keys in sequence and
confirm by selecting §OK§.
s
Select the correct language
and press the right display
key.
Setting the display
Setting the screensaver
You can set a picture from the Resource
Directory (¢ page 65) or the time to be
displayed as a screensaver when the handset is in idle status. This will replace the
idle status display. It may conceal the calendar, date, time and name.
The screensaver is not displayed in certain
situations, e.g., during a call or if the
handset is de-registered.
If a screensaver is activated, the Screensaver menu option is marked with μ.
v ¢ Ï ¢ Display ¢ Screensaver
The current setting is displayed.
¤ You can enter data in the following
fields:
Activation:
Select On (screensaver is displayed) or
Off (no screensaver).
Selection :
Select screensaver or
§View§
Press the display key. The
active screensaver is displayed.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Handset settings
s
Select screensaver and press
§OK§.
§Save§
Press the display key.
If the screensaver conceals the display,
briefly press a to show the idle display.
Setting large font
You can increase the font size of print and
symbols in call lists and in the directory to
improve readability. Only one entry is
shown at a time on the display instead of
several entries and names are abbreviated
if necessary.
v ¢ Ï ¢ Display ¢ Large Font
§Change§
Press display key (³= on).
Setting the colour scheme
You can set the display to be shown in various colour combinations.
v ¢ Ï ¢ Display ¢ Colour Schemes
Select Colour Scheme (1 to 5) and press
§OK§.
•
Setting the display Backlight
Depending on whether or not the handset
is in the base/charger, you can activate or
deactivate the backlight. If it is activated,
the display is permanently dimmed. If the
backlight is deactivated it is switched on
by pressing any key. In this case the
pressed key has no other function.
v ¢ Ï ¢ Display ¢ Backlight
The current setting is displayed.
¤ You can enter data in the following
fields:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
Version 4, 16.09.2005
Please note
With the On setting, the standby
time of the handset can be significantly reduced.
Press the display key.
§Save§
• Activating/deactivating auto
answer
If you activate this function, when you
receive a call you can simply lift the handset out of the base/charger without having
to press the talk key c.
v ¢ Ï ¢ Telephony ¢ Auto Answer
§Change§
Press display key (³= on).
Changing the speaker/earpiece
volume
You can set the loudspeaker volume for
speaker mode and the earpiece volume to
five different levels.
During a conversation via the earpiece or
in speaker mode:
ø/ ÷
Press the side key to call up the
Handset Volume menu.
Change the volume by pressing ø (louder) or ÷ (quieter).
or
t
Press the control key to call up
the Handset Volume menu.
Set the earpiece or speaker
volume by pressing r.
The setting will automatically be saved
after approximately 3 seconds, if not then
press the display key §Save§.
If t is assigned to another function,
e.g., call swap (¢ page 31):
§Options§
Open menu.
Volume
Select and press §OK§.
Configure setting (see above).
Please note
u The settings for the earpiece also
apply to a connected headset.
u You can also set the call volume
using the menu (¢ page 27).
63
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Handset settings
Changing ringtones
u Volume:
You can choose between five volumes
(1–5; e.g., volume 3 = Š) and the
"crescendo" ringtone (6; volume
increases with each ring = ‡).
u Ringtones:
You can select a ringtone from a list of
pre-loaded melodies.
You can select various ringtones, melodies or any sound from the Resource
Directory (¢ page 65).
You can set different ringtones for the following functions:
u Int. Calls
u Extern. Calls
Setting volume/melodies
In idle status:
v ¢ Ï ¢ Audio Settings
¢ Ringtones(Handset) ¢ Volume/Melodies
r
Setting volume/melodies for
internal calls and anniversaries.
s
Scroll to the next line.
r
Setting volumes/melodies for
external calls.
§Save§
Press the display key to save
the setting.
While the phone is ringing, you can permanently change the volume by pressing
the side keys ø (louder) or ÷ (quieter).
Version 4, 16.09.2005
•
Additionally for external calls:
You can specify a time period when you do
not want the telephone to ring, e.g., during the night.
v ¢ Ï ¢ Audio Settings
¢ Ringtones(Handset) ¢ Time Control
Time Control:
Select On or Off.
If the time control is activated:
Suspend ring. from:
Enter the start of the period in 4-digit
format.
Suspend ring. until:
Enter the end of the period in 4-digit
format.
Please note
During this period, you will continue to
receive calls from numbers to which
you have assigned a personalised melody in the directory (VIP).
Activating/deactivating the ringtone
for unknown calls.
You can set your phone not to ring for calls
where Calling Line Identification has been
withheld. The call will only be signalled on
the display.
In idle status:
v ¢ Ï ¢ Audio Settings
¢ Ringtones(Handset) ¢ Anon. Calls Silent
Press §Change§ to activate or deactivate the
function (³= on).
Activating/deactivating the ringtone
You can deactivate the ringtone on your
handset before you answer a call or when
the handset is in idle status; the ringtone
can be deactivated permanently or just for
the current call. The ringtone cannot be
re-activated while an external call is in
progress.
Deactivating the ringtone permanently
*
Press and hold the star key.
The ó icon appears in the display.
Reactivating the ringtone
*
Deactivating the ringtone for the current
call
§Silence§
64
Press and hold the star key.
Press the display key.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Handset settings
Activating/deactivating the alert tone
In place of the ringtone, you can activate
an alert tone. When you receive a call, you
will hear a short tone ("Beep") instead of
the ringtone.
*
Press and hold the star key
and within 3 seconds:
§Beep§
Press the display key. A call will
now be signalled by one short
alert tone.
ñ appears in the display.
Resource Directory
The resource directory on the handset
manages sounds, which you can use as
ringtones, and pictures, which you can
use as caller pictures or as screensavers.
Prerequisite: Calling Line Identification
(CLIP). The resource directory can manage
the following media types:
Type
Format
Sound
Ringtones
Internal
Monophonic
Internal
Polyphonic
Internal
Imported sounds
WMA, MP3, WAV
Picture
– Caller picture
– Screensaver
BMP, JPG, GIF
128 x 86 pixels
128 x 160 pixels
Version 4, 16.09.2005
Various mono and polyphonic sounds and
pictures are preconfigured on your handset.
You can listen to the available sounds and
view the pictures.
You can download pictures and sounds
from a PC (¢ page 77). If there is not
enough memory available, you must first
delete one or more pictures or sounds.
Playing back sounds/viewing caller
pictures
v ¢ · ¢ Screensavers / Caller Pictures
/ Sounds (select entry)
Pictures:
Press the display key. The
selected picture is displayed.
Switch between pictures using
the q key.
If you have saved a picture in an invalid file
format, you will see an error message
after selecting the entry.
§View§
Sounds:
The selected sound is played back immediately. Switch between the sounds using
the q key.
You can set the volume during playback.
§Options§
Open menu.
Volume
Select and press §OK§.
r
Set volume.
§Save§
Press the display key.
Deleting/renaming a picture/sound
You have selected an entry.
§Options§
Open menu.
If a picture/sound cannot be deleted (¯),
these options are not available. You can
select the following functions:
Delete Entry
The selected entry is deleted.
Rename
Change the name (max. 16 characters)
and press §Save§. The entry is stored with
the new name.
Checking the memory
You can check how much memory is available for screensavers and caller pictures.
v ¢ · ¢ Capacity
65
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Handset settings
• Activating/deactivating
advisory tones
Your handset uses advisory tones to tell
you about different activities and statuses.
The following advisory tones can be activated/deactivated independently of each
other:
u Key tone: every key press is confirmed.
u Acknowledge tones:
– Confirmation tone (ascending tone
sequence): at the end of an entry/
setting and when an SMS or a new
entry arrives in the answering
machine list or call list
– Error tone (descending tone
sequence): when you make an
incorrect entry
– Menu end tone: when scrolling to
the end of a menu
u Battery low beep: the battery needs
charging.
In idle status:
v ¢ Ï ¢ Audio Settings
¢ Advisory Tones
¤ You can enter data in the following
fields:
Key Tones:
Select On or Off.
Confirmation:
Select On or Off.
Battery:
Select On or Off.
§Save§
Press the display key.
Version 4, 16.09.2005
• Setting your own area code
To transfer phone numbers (e.g., in
vCards), it is essential that your area code
(international and local area code) is
saved on the phone.
Some of these numbers are already preset.
v ¢ Ï ¢ Telephony ¢ Area Codes
66
Check that the (pre)set area code is correct.
¤ You can enter data in the following
fields:
q
Select/change input field.
r
Navigate in the input field.
Ñ
If necessary, delete number:
press the display key.
~
Enter number.
§Save§
Press the display key.
Example:
Area Codes
International code:
00 - 44
Local area code:
0-[
Û
]
Save
• Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by
a reset:
u Registration to the base
u Date and time
u Entries in the calendar
u Entries in the directory, the call lists,
the SMS lists and the content of the
resource directory
v ¢ Ï ¢ System ¢ Handset Reset
§Yes§
Press the display key.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Setting the base
Setting the base
The base settings are carried out using a
registered Gigaset S79H handset.
Changing the base Gigaset S795
ringtones
u Volume:
You can choose between five volumes
(1–5; e.g., volume 3 = Š) and the
"crescendo" ringtone (6; volume
increases with each ring = ‡).
u Ringtones:
You can select a ringtone from a list of
pre-loaded melodies.
In idle status:
v ¢ Ï ¢ Audio Settings
¢ Ringtones (Base)
¤ You can enter data in the following
fields:
r
Set volume.
s
Scroll to the next line.
r
Set melody.
§Save§
Press the display key to save
the setting.
• Repeater support
With a repeater, you can increase the
range and signal strength of your base.
You will need to activate repeater mode.
This will terminate any calls that are in
progress at the time.
Prerequisite: A repeater is registered.
v ¢ Ï ¢ System ¢ Repeater Mode
Press §Change§ to activate or deactivate
repeater mode (³= on).
Please note
u Eco Mode / Eco Mode+
(¢ page 53) and repeater support
cancel each other out, i.e., if you
use a repeater, you cannot use Eco
Mode or Eco Mode+.
u Encrypted transmission activated at
the factory is deactivated when a
repeater is registered.
• Activating/deactivating
music on hold
Version 4, 16.09.2005
v ¢ Ï ¢ Audio Settings
¢ Music on hold
Press §Change§ to activate or deactivate the
music on hold (³ = on).
67
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / registr_sett.fm / 09.10.2009
Setting the base
• Protecting against
unauthorised access
factory settings
Protect the system settings of the base
with a PIN known only to yourself. The system PIN must be entered when, for example, registering/de-registering a handset
to/from the base or when restoring the
default settings.
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode is activated and Eco Mode+
is deactivated,
u The system PIN is not reset.
v ¢ Ï ¢ System ¢ Base Reset
~
Enter the system PIN and
press §OK§.
§Yes§
Press the display key.
Changing the system PIN
You can change the 4-digit system PIN set
on the base (default setting: 0000) to a 4digit PIN known only by you.
Gigaset S795: Setting a system PIN facilitates remote operation of the answering
machine (¢ page 50).
v ¢ Ï ¢ System ¢ System PIN
~
Enter the current system PIN
and press §OK§.
~
Enter your new system PIN
and press §OK§.
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code
0000:
Disconnect the power cable from the
base. Hold down the registration/paging
key on the base while reconnecting the
power cable to the base. Hold down the
key for at least 5 seconds.
The base has now been reset and the system PIN set to 0000.
Please note
All handsets are de-registered and
must be re-registered. All settings are
reset to the factory settings.
Version 4, 16.09.2005
• Resetting the base to the
68
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / pabx.fm / 09.10.2009
Connecting the base to the PABX
Connecting the base to the
PABX
The following settings are only necessary
if your PABX requires them; see the PABX
user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
• Dialling modes and recall
The current setting is indicated by Ø.
Changing the dialling mode
The following dialling modes can be
selected:
u Tone dialling (DTMF)
u Pulse dialling (PD)
v ¢ Ï ¢ Telephony ¢ Dialling Mode
s
Select dialling mode and press
§Select§ (Ø = selected).
Setting recall
• Saving an access code
(outside line code)
Prerequisite: You may have to enter an
access code in front of the number for
external calls in your PABX, e.g., "0".
v ¢ Ï ¢ Telephony ¢ Access Code
~
Enter or change access code,
max. 3 digits.
§Save§
Press the display key.
If an access code has been saved:
u The access code is prefixed automatically when you dial a number from the
following lists: SMS centre numbers,
call lists or answering machine list.
u The access code must be entered when
dialling manually and when manually
entering directory, emergency/quick
dial numbers or SMS centre numbers.
u If you copy the recipient's number from
the directory when sending an SMS,
you have to delete the access code.
u An existing access code is deleted
using Ñ.
Version 4, 16.09.2005
Your phone is preset at the factory for
operation on the main connection. For
operation on a PABX, you may have to
change this value. Please refer to the user
guide for your PABX.
v ¢ Ï ¢ Telephony ¢ Recall
s
Select recall and press §Select§
(Ø = set value).
Possible values are:
80 ms, 100 ms, 120 ms,
180 ms, 250 ms, 300 ms,
400 ms, 600 ms, 800 ms.
69
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / pabx.fm / 09.10.2009
Connecting the base to the PABX
Setting pauses
Changing the pause after line seizure
You can change the length of the pause
that is inserted between pressing the talk
key c and sending the number.
v
Open the main menu.
*#Q5#
L
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.;
2 = 3 secs.; 3 = 7 secs.) and
press §OK§.
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5#
2
Press keys.
~
Enter a number for the length
of the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press §OK§.
Version 4, 16.09.2005
Changing a dialling pause (pause after
access code)
Prerequisite: You have saved an access
code (¢ page 69).
v
Open the main menu.
*#Q5#
Press keys.
~
Enter number for the length of
the pause
(1 = 1 sec.; 2 = 2 secs.;
3 = 3 secs.; 4 = 6 secs.)
and press §OK§.
To insert a dialling pause: press and hold
S for 2 seconds. A P appears in the display.
70
Switching temporarily to tone
dialling (DTMF)
If your PABX still operates with pulse dialling (PD), but you need tone dialling for a
connection (e.g., to listen to the network
mailbox), you must switch to tone dialling
for the call.
Prerequisite: You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call ends, pulse dialling is automatically activated again.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / appendix.fm / 09.10.2009
Service (Customer Care)
Service (Customer Care)
We offer you support that is fast and tailored to your specific needs!
Our Online Support on the Internet can be
reached any time from anywhere.
www.gigaset.com/customercare
It provides you with 24/7 support for all
our products. It also provides a list of FAQs
and answers plus user guides and current
software updates (if available for the product) for you to download.
You will also find frequently asked questions and answers in the appendix of this
user guide.
For personal advice on our range of products and assistance with repairs or guarantee/warranty claims you can contact us
on:
UK helpdesk: 0 84 53 67 08 12.
Please have your proof of purchase ready
when calling with regard to guarantee/
warranty claims.
Replacement or repair services are not
offered in countries where our product is
not sold by authorised dealers.
Questions and answers
If you have any questions about the use of
your phone, you can contact us 24/7 at
www.gigaset.com/customercare.
The table below contains a list of common
problems and possible solutions.
The display is blank.
1. The handset is not switched on.
Press and hold the end call key a.
¥
2. The battery is empty.
Charge the battery or replace it
(
page 12).
¥
¢
Not all menu items are displayed.
The menu display is restricted (standard
mode).
Activate extended menu display
(expert mode •) (
page 25).
¥
¢
No Base flashes on the display.
1. The handset is outside the range of the
base.
Move the handset closer to the base.
¥
2. The base's range is reduced because
Eco Mode is activated.
Deactivate Eco Mode (
page 53) or
reduce the distance between the handset and the base.
¥
¢
3. The base is not switched on.
Check the base power adapter
(
page 10).
¥
¢
Please register handset flashes on the display.
Handset has not been registered with the base
or has been deregistered.
Register the handset (
page 57).
¥
Handset does not ring.
¢
1. The ringtone is deactivated.
Activate the ringtone (
page 64).
¥
¢
¥
¢
2. Call divert set for "All Calls".
Deactivate call divert (
page 31).
3. The phone only rings if the phone number
has been transferred.
Switch on the ringtone for unknown
calls (
page 64).
Version 4, 16.09.2005
¥
¢
71
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / appendix.fm / 09.10.2009
Service (Customer Care)
You cannot hear a ringtone/dialling tone
from the fixed line network.
The phone cord supplied has not been used or
has been replaced by a new cord with the
wrong pin connections.
Please always use the phone cord supplied
or ensure that the pin connections are correct when purchasing from a retailer
(
page 10).
¥
¢
Error tone sounds after system PIN prompt.
You have entered the wrong system PIN.
Reset the system PIN to 0000
(
page 68).
¥
¢
Forgotten the system PIN.
¥
Reset the system PIN to 0000
(
page 68).
¢
The other party cannot hear you.
You have pressed the mute button h. The
handset is "muted".
Reactivate the microphone (
page 29).
¥
¢
The number of the caller is not displayed
despite CLIP.
Calling Line Identification is not enabled.
The caller should ask the network provider
to enable Calling Line Identification (CLI).
¥
You hear an error tone when keying an
input (a descending tone sequence).
Action has failed/invalid input.
Repeat the operation.
Watch the display and refer to the user
guide if necessary.
¥
You cannot listen to messages on the network mailbox.
Your PABX is set for pulse dialling.
Set your PABX to tone dialling.
¥
Gigaset S795 only:
No time is specified for a message in the call
list.
Date and time have not been set.
Set the date and time (
page 15).
¥
¢
The answering machine announces "PIN is
incorrect" during remote operation.
1. You have entered the wrong system PIN.
Enter the system PIN again.
Version 4, 16.09.2005
¥
2. The system PIN is still set to 0000.
Set the system PIN to something other
than 0000 (
page 68).
¥
72
¢
The answering machine is not recording
any messages/has switched over to answer
only.
Its memory is full.
Delete old messages.
Play back new messages and delete.
¥
¥
Exclusion of liability
Some displays may contain pixels (picture elements), which remain activated or deactivated. As a pixel is made
up of three sub-pixels (red, green,
blue), it is possible that pixel colours
may vary.
This is completely normal and does not
indicate an error.
Authorisation
This device is intended for analogue
phone lines in the UK.
Country-specific requirements have been
taken into consideration.
We, Gigaset Communications GmbH,
declare that this device meets the
essential requirements and other relevant
regulations laid down in Directive 1999/5/
EC.
A copy of the 1999/5/EC Declaration of
Conformity is available at this Internet
address:
www.gigaset.com/docs
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / appendix.fm / 09.10.2009
Service (Customer Care)
Version 4, 16.09.2005
Guarantee Certificate
United Kingdom
Without prejudice to any claim the user
(customer) may have in relation to the
dealer or retailer, the customer shall be
granted a manufacturer's Guarantee
under the conditions set out below:
u In the case of new devices and their
components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Gigaset Communications shall,
at its own option and free of charge,
either replace the device with another
device reflecting the current state of
the art, or repair the said device. In
respect of parts subject to wear and
tear (including but not limited to, batteries, keypads, casing), this warranty
shall be valid for six months from the
date of purchase.
u This Guarantee shall be invalid if the
device defect is attributable to
improper treatment and/or failure to
comply with information contained in
the user guides.
u This Guarantee shall not apply to or
extend to services performed by the
authorised dealer or the customer
themselves (e. g. installation, configuration, software downloads). User
guides and any software supplied on a
separate data medium shall be
excluded from the Guarantee.
u The purchase receipt, together with the
date of purchase, shall be required as
evidence for invoking the Guarantee.
Claims under the Guarantee must be
submitted within two months of the
Guarantee default becoming evident.
u Ownership of devices or components
replaced by and returned to Gigaset
Communications shall vest in Gigaset
Communications.
u This Guarantee shall apply to new devices purchased in the European Union.
For Products sold in the United King-
dom the Guarantee is issued by: Gigaset Communications UK Limited, Faraday House, Sir William Siemens Square,
Frimley, Camberley, Surrey, GU16 8QD.
u Any other claims resulting out of or in
connection with the device shall be
excluded from this Guarantee. Nothing
in this Guarantee shall attempt to limit
or exclude a Customers Statutory
Rights, nor the manufacturer's liability
for death or personal injury resulting
from its negligence.
u The duration of the Guarantee shall not
be extended by services rendered
under the terms of the Guarantee.
u Insofar as no Guarantee default exists,
Gigaset Communications reserves the
right to charge the customer for
replacement or repair.
u The above provisions does not imply a
change in the burden of proof to the
detriment of the customer.
To invoke this Guarantee, please contact
the Gigaset Communications telephone
service. The relevant number is to be
found in the accompanying user guide.
73
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / appendix.fm / 09.10.2009
Protecting our environment
Protecting our environment
Our environmental mission statement
We, Gigaset Communications GmbH, bear
social responsibility and are actively committed to a better world. Our ideas, technologies and actions serve people, society
and the environment. The aim of our global activity is to secure sustainable life
resources for humanity. We are committed
to a responsibility for our products that
comprises their entire life cycle. The environmental impact of products, including
their manufacture, procurement, distribution, use, service and disposal, are already
evaluated during product and process
design.
Further information on environmentally
friendly products and processes is available on the Internet at www.gigaset.com.
Environmental management system
Version 4, 16.09.2005
Gigaset Communications
GmbH is certified pursuant to the international
standards EN 14001 and
ISO 9001.
ISO 14001 (Environment): certified since
September 2007 by TüV SÜD Management Service GmbH.
ISO 9001 (Quality): certified since 17/02/
1994 by TüV SÜD Management Service
GmbH.
74
Ecological energy consumption
The use of ECO DECT (¢ page 53) saves
energy and makes an active contribution
towards protecting the environment.
Disposal
Batteries should not be disposed of in general household waste. Observe the local
waste disposal regulations, details of
which can be obtained from your local
authority.
All electrical and electronic products
should be disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the government or the local authorities.
IThis crossed-out wheeled
bin symbol on the product
means the product is
covered by the European
Directive 2002/96/EC.
The correct disposal and
separate collection of your old appliance
will help prevent potential negative consequences for the environment and human
health. It is a precondition for reuse and
recycling of used electrical and electronic
equipment.
For more detailed information about disposal of your old appliance, please contact your local council refuse centre or the
original supplier of the product.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / appendix.fm / 09.10.2009
Appendix
Appendix
Specifications
Batteries
Care
¤ Wipe the base station, charging cradle
and handset with a damp cloth (do not
use solvent) or an antistatic cloth.
¤ Impairments in the high-gloss finish
can be carefully removed using diplay
polishes for mobile phones.
Never use a dry cloth. This can cause
static.
Contact with liquid
!
If the handset has come into contact with
liquid:
1. Switch off the handset and remove
the battery pack immediately.
2. Allow the liquid to drain from the handset.
3. Pat all parts dry, then place the handset
with the battery compartment open
and the keypad facing down in a dry,
warm place for at least 72 hours (not
in a microwave, oven etc.).
4. Do not switch on the handset again
until it is completely dry.
When it has fully dried out, you will normally be able to use it again.
Technology:
Nickel-metal-hydride (NiMH)
Size:
AAA (Micro, HR03)
Voltage: 1,2 V
Capacity: 550 - 1000 mAh
The device is supplied with two approved
batteries.
Handset operating times/charging
times
This Gigaset can charge batteries up to a
capacity of 1000 mAh. The use of special
high-performance batteries or batteries
with high capacities is not recommended
for cordless phones.
The operating time of your Gigaset
depends on the capacity and age of the
batteries and the way they are used.
(All times are maximum possible times).
Capacity (mAh) approx.
550
700
800
1000
140/
50
165/
58
185/
67
230/
83
Talktime (hours)
11
12
14
17
Operating time for
1.5 hrs of calls per
day (hours)**
85
95
110
135
Charging time in
base (hours)
7,5
8,5
10
12
Charging time in
charger (hours)
6,5
7,5
8,5
10,5
Standby time
(hours)*
* without/with display backlight
** without display backlight
(Setting the display Backlight
page 63)
Version 4, 16.09.2005
¢
Due to the constant progression in battery
development, the list of recommended
batteries in the FAQ section of the Gigaset
Customer Care pages is regularly updated:
www.gigaset.com/customercare
75
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / appendix.fm / 09.10.2009
Appendix
Writing and editing text
Base power consumption
In standby mode:
Gigaset S790: approx. 1,1 watt
Gigaset S795: approx. 1,2 watt
During the conversation:
Gigaset S790: approx. 1,0 watt
Gigaset S795: approx. 1,1 watt
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission power
10 mW, average power
per channel
The following rules apply when writing
text:
u Each key between Q and O is
assigned several letters and characters.
u Control the cursor with u v t s.
Press and hold u or v to move the
cursor word by word.
u Characters are inserted at the cursor
position.
u Press the star key * to display the
table of special characters. Select the
required character and press the display key §Insert§ to insert the character at
the cursor position.
u Press and hold Q to O to enter
digits.
u Press display key Ñ to delete the character to the left of the cursor. Press and
hold to delete the word to the left of
the cursor.
u The first letter of the name of directory
entries is automatically capitalised, followed by lower case letters.
Range
Up to 300 m outdoors,
up to 50 m indoors
Setting upper/lower case or digits
Base power supply
230 V ~/50 Hz
General specifications
DECT standard
Is supported
GAP standard
Is supported
No. of channels
60 duplex channels
Radio frequency range 1880–1900 MHz
Duplex method
Time multiplex,
10 ms frame length
Environmental condi- +5°C to +45°C, 20% to
tions in operation
75% relative humidity
Dialling mode
DTMF (tone dialling)/
PD (pulse dialling)
Pin connections on the telephone jack
Version 4, 16.09.2005
3
2
1
76
4
5
6
1
2
3
4
5
6
unused
unused
a
b
unused
unused
Repeatedly press the hash key # to
change the text input mode.
123
Writing digits
Abc
Upper case *
abc
Lower case
* First letter in capitals, all others in lower case
The active mode is indicated at the bottom
right of the screen.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / appendix.fm / 09.10.2009
Additional functions via the PC interface
Writing an SMS/names
¤ Enter the individual letters/characters
by pressing the corresponding key.
The characters assigned to the key are
shown in a selection line at the bottom left
of the screen. The selected character is
highlighted.
¤ Briefly press the key several times in
succession to select the required letter/
character.
Standard characters
2
3
4
5
L
M
N
O
Q
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
1)
2)
a
d
g
j
m
p
t
w
.
b
e
h
k
n
q
u
x
,
1
c
f
i
l
o
r
v
y
?
2
3
4
5
6
s
8
z
!
ä
ë
ï
á
é
í
à
è
ì
â
ê
î
ã
ç
Version 4, 16.09.2005
1) Space
2) Line break
ö ñ ó ò ô õ
7 ß
ü ú ù û
9 ÿ ý æ ø å
0
Additional functions via the
PC interface
To enable your handset to communicate
with the PC, the "Gigaset QuickSync" program must be installed on your PC (free to
download at www.gigaset.com/
gigasets790).
After installing "Gigaset QuickSync", connect the handset to your computer using a
USB data cable (¢ page 17).
Transferring data
Start the "Gigaset QuickSync" program.
You can now:
u Synchronise your handset directory
with Outlook
u Download caller pictures (.bmp) from
the computer to the handset,
u Download pictures (.bmp) as a screensaver from the computer to the handset.
u Download sounds (ringtones) from the
computer to the handset.
During the transfer of data between handset and PC, you will see Data transfer in
progress on the display. During this time
the keypad is disabled, and incoming calls
will be ignored.
77
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / appendix.fm / 09.10.2009
Additional functions via the PC interface
Completing a firmware update
¤ Connect you phone to your PC using a
USB data cable (¢ page 17).
¤ Start the "Gigaset QuickSync" program
¤ Press and hold keys 4 and L with
the index and middle finger.
on your PC.
¤ Establish a connection to your handset.
¤ Select [Settings] ¢ [Device properties] to open the [Device] tab.
¤ Click on [Firmware update].
This launches the firmware update.
The update process can take up to 10 minutes (not including the download time).
Do not interrupt the process or remove
the USB data cable.
The data is initially loaded from the
update server on the Internet. The
amount of time this takes is dependent on
the speed of your Internet connection.
The display on your phone is switched off
and the message key f and the talk key
c start flashing.
Once the update is complete, your phone
will automatically restart.
Version 4, 16.09.2005
Procedure in case of an error
If the update procedure fails or your
phone does not work properly following
the update, repeat the update procedure
as follows:
¤ Close the "Gigaset QuickSync" program on the PC.
¤ Remove the USB data cable from the
telephone.
¤ Remove the battery (¢ page 12).
¤ Replace the battery.
¤ Complete the firmware update as
described.
If the update procedure fails several times
or you can no longer connect to the PC,
proceed as follows:
¤ Close the "Gigaset QuickSync" program on the PC.
¤ Remove the USB data cable from the
telephone.
¤ Remove the battery (¢ page 12).
78
¤ Replace the battery.
¤ Release keys 4 and L. The mes¤
sage key f and the talk key c will
flash alternately.
Complete the firmware update as
described.
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / accessories_SAG.fm / 09.10.2009
Accessories
Accessories
Gigaset handsets
Upgrade your Gigaset to a cordless PABX:
Gigaset S79H handset
u
u
u
u
u
u
u
u
Illuminated graphic colour display (65k colours)
Illuminated keypad
Speaker mode
Polyphonic ringtones
Directory for approx. 500 entries
Caller picture
SMS (prerequisite: CLIP must be enabled)
PC interface, e.g., for managing directory entries,
ringtones and screensavers
u Headset socket
u Room monitor
www.gigaset.com/gigasets79h
Gigaset C59H handset
u
u
u
u
u
u
u
u
Version 4, 16.09.2005
Illuminated graphic colour display (65k colours)
Illuminated keypad
Speaker mode
Polyphonic ringtones
Directory for approx. 150 entries
SMS (prerequisite: CLIP must be enabled)
Headset socket
Room monitor
www.gigaset.com/gigasetc59h
79
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / accessories_SAG.fm / 09.10.2009
Accessories
Gigaset SL78H handset
u
u
u
u
u
u
u
u
Illuminated graphic colour display (256k colours)
Illuminated keypad
Speaker mode
Polyphonic ringtones
Directory for approx. 500 entries
Caller picture
SMS (prerequisite: CLIP must be enabled)
PC interface, e.g., for managing directory entries,
ringtones and screensavers
u Room monitor
www.gigaset.com/gigasetsl78h
Gigaset S67H/S68H handset
u
u
u
u
u
u
u
u
u
u
Illuminated graphic colour display (65k colours)
Illuminated keypad
Speaker mode
Polyphonic ringtones
Directory for approx. 250 entries
Caller picture
SMS (prerequisite: CLIP must be enabled)
Headset socket
Bluetooth (Gigaset S68H only)
Room monitor
www.gigaset.com/gigasetS67h
Gigaset SL37H handset
Version 4, 16.09.2005
u
u
u
u
u
u
u
u
Illuminated graphic colour display (65k colours)
Illuminated keypad
Speaker mode
Polyphonic ringtones
Directory for approx. 250 entries
Caller picture
SMS (prerequisite: CLIP must be enabled)
PC interface, e.g., for managing directory entries,
ringtones and screensavers
u Headset socket
u Bluetooth
u Room monitor
u Walky-talky function
www.gigaset.com/gigasetsl37h
80
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / accessories_SAG.fm / 09.10.2009
Accessories
Gigaset repeater
The Gigaset repeater can be used to increase the reception
range between your Gigaset handset and the base.
www.gigaset.com/gigasetrepeater
Gigaset HC450 – door intercom for cordless phones
u Use the intercom from your cordless phone – no need for
a fixed home phone
u Intuitive user functions using the display keys (open door,
switch on entry light)
Simple to configure using the handset menu
Forward to external phone numbers (intercom feature)
Simple to install and register with the Gigaset system
Replaces existing call key – no further cable is needed
Supports the existing doorbell and standard door opener
Configuration options for the second doorbell key
(separate intercom call, activating entrance lighting, or
function like first doorbell key)
www.gigaset.com/gigasethc450
u
u
u
u
u
u
Version 4, 16.09.2005
All accessories and batteries are available from your phone retailer.
Use only original accessories. This will avoid possible health risks and personal
injury, and also ensure that all the relevant regulations are complied with.
81
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / accessories_SAG.fm / 09.10.2009
Mounting the base on the wall (Gigaset S790 only)
Mounting the base on the wall (Gigaset S790 only)
41 mm
Approx.
5.5 mm
Mounting the charger on the wall
23.5 mm
Version 4, 16.09.2005
Approx.
4 mm
82
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / S795SIX.fm / 09.10.2009
Index
Index
Version 4, 16.09.2005
A
Access code . . . . . . . . . . . . . . . . . . . . 69
for a PABX . . . . . . . . . . . . . . . . . . . 69
Access protection . . . . . . . . . . . . . . . . 68
Accessories . . . . . . . . . . . . . . . . . . . . 79
Acknowledge tones . . . . . . . . . . . . . . 66
Activating
advisory tones . . . . . . . . . . . . . . . . 66
answering machine . . . . . . . . . . . . 46
answering machine
(remote operation) . . . . . . . . . . 51
appointment . . . . . . . . . . . . . . . . . 54
handset . . . . . . . . . . . . . . . . . . . . . 22
keypad lock . . . . . . . . . . . . . . . . . . 22
listening in . . . . . . . . . . . . . . . . . . . 59
muting ringtone . . . . . . . . . . . . . . . 40
ring delay . . . . . . . . . . . . . . . . . . . . 63
room monitor . . . . . . . . . . . . . . . . . 60
two-way record . . . . . . . . . . . . . . . 49
Advisory tones . . . . . . . . . . . . . . . . . . 66
Alarm clock . . . . . . . . . . . . . . . . . . . . 56
Alert tone . . . . . . . . . . . . . . . . . . . . . 65
Anniversary . . . . . . . . . . . . . . . . . . . . 34
deactivating . . . . . . . . . . . . . . . . . . 35
missed . . . . . . . . . . . . . . . . . . . 37, 55
saving in the directory. . . . . . . . . . . 34
Announcement (answering machine) . 47
Anonymous calling . . . . . . . . . . . . . . 30
Answer only mode (answering
machine) . . . . . . . . . . . . . . . . . . 46
Answering machine . . . . . . . . . . . . . . 46
activating/deactivating . . . . . . . . . . 46
deleting messages . . . . . . . . . . . . . 48
list . . . . . . . . . . . . . . . . . . . . . . 36, 37
playing back messages . . . . . . . . . . 47
recording a personal
announcement/advisory
message . . . . . . . . . . . . . . . . . 46
remote operation . . . . . . . . . . . . . . 50
scrolling back . . . . . . . . . . . . . . . . . 48
scrolling forward. . . . . . . . . . . . . . . 48
Answering machine, see also
Network mailbox
Appointment . . . . . . . . . . . . . . . . . . . 54
Appointment/anniversary
display missed . . . . . . . . . . . . . . . . 55
Appointments
activating/deactivating . . . . . . . . . . 55
deleting. . . . . . . . . . . . . . . . . . . . . 55
managing . . . . . . . . . . . . . . . . . . . 55
Area code
setting own area code . . . . . . . . . . 66
Assigning a number key . . . . . . . . . . 61
Authorisation . . . . . . . . . . . . . . . . . . 72
Automatic
network provider preselection . . . . 38
redial . . . . . . . . . . . . . . . . . . . . . . 35
ring delay . . . . . . . . . . . . . . . . 28, 63
B
Base
changing . . . . . . . . . . . . . . . . . . . . 58
connecting . . . . . . . . . . . . . . . . . . 10
connecting to PABX . . . . . . . . . . . . 69
restoring to factory settings . . . . . . 68
setting ringtone . . . . . . . . . . . . . . . 67
setting up . . . . . . . . . . . . . . . . . . . 10
settings . . . . . . . . . . . . . . . . . . . . . 67
system PIN . . . . . . . . . . . . . . . . . . 68
Battery
charging . . . . . . . . . . . . . . . . 2, 3, 14
display . . . . . . . . . . . . . . . . . . . . 2, 3
icon . . . . . . . . . . . . . . . . . . . . . . 2, 3
inserting . . . . . . . . . . . . . . . . . . . . 12
tone . . . . . . . . . . . . . . . . . . . . . . . 66
Best base . . . . . . . . . . . . . . . . . . . . . 58
Birthday, see Anniversary
C
Calendar . . . . . . . . . . . . . . . . . . . . . . 54
Call
accepting . . . . . . . . . . . . . . . . . . . 28
connect participant . . . . . . . . . . . . 59
ending . . . . . . . . . . . . . . . . . . . . . 28
external . . . . . . . . . . . . . . . . . . . . . 28
internal . . . . . . . . . . . . . . . . . . . . . 58
make anonymous call . . . . . . . . . . 30
picking up from answering
machine . . . . . . . . . . . . . . . . . 48
transferring (connecting) . . . . . 58, 59
two-way record . . . . . . . . . . . . . . . 49
83
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / S795SIX.fm / 09.10.2009
Version 4, 16.09.2005
Index
Call divert . . . . . . . . . . . . . . . . . . . . . 31
Call duration . . . . . . . . . . . . . . . . . . . 28
Call lists . . . . . . . . . . . . . . . . . . . . . . . 36
Call screening during recording . . . . . 49
Call swap . . . . . . . . . . . . . . . . . . . . . . 31
Call waiting
accepting/rejecting . . . . . . . . . . . . . 30
activating/deactivating . . . . . . . . . . 30
external call . . . . . . . . . . . . . . . . . . 30
internal call . . . . . . . . . . . . . . . . . . 59
Call-by-call . . . . . . . . . . . . . . . . . . . . . 38
Caller Picture . . . . . . . . . . . . . . . . 32, 65
Calling
anonymously . . . . . . . . . . . . . . . . . 30
external . . . . . . . . . . . . . . . . . . . . . 28
internal . . . . . . . . . . . . . . . . . . . . . 58
Calling Line Identification . . . . . . . . . . 28
cancel once . . . . . . . . . . . . . . . . . . 30
Cancelling
preselection . . . . . . . . . . . . . . . . . . 38
Care of the telephone . . . . . . . . . . . . 75
CD, see Call divert
Changing
destination number
(room monitor) . . . . . . . . . . . . 61
dialling mode . . . . . . . . . . . . . . . . . 69
display language . . . . . . . . . . . . . . . 62
earpiece volume . . . . . . . . . . . . . . . 63
internal number of a handset . . . . . 60
name of a handset . . . . . . . . . . . . . 59
pauses . . . . . . . . . . . . . . . . . . . . . . 70
ringtone . . . . . . . . . . . . . . . . . . 64, 67
speaker volume . . . . . . . . . . . . . . . 63
system PIN . . . . . . . . . . . . . . . . . . . 68
Character set . . . . . . . . . . . . . 40, 41, 77
Charge status display . . . . . . . . . . . . 2, 3
CLI, CLIP . . . . . . . . . . . . . . . . . . . . . . 28
CLIR. . . . . . . . . . . . . . . . . . . . . . . . . . 30
Colour scheme . . . . . . . . . . . . . . . . . . 63
Conference
internal . . . . . . . . . . . . . . . . . . . . . 58
Confirmation tone . . . . . . . . . . . . . . . 66
Connecting
base to PABX . . . . . . . . . . . . . . . . . 69
headset . . . . . . . . . . . . . . . . . . . . . 17
Consultation call . . . . . . . . . . . . . . . . 31
internal . . . . . . . . . . . . . . . . . . . . . 58
Control key . . . . . . . . . . . . . . . . . . 2, 19
Correcting incorrect entries . . . . . . . . 20
Customer Care . . . . . . . . . . . . . . . . . . 71
84
D
Deactivating
advisory tones . . . . . . . . . . . . . . . . 66
answering machine . . . . . . . . . . . . 46
appointment . . . . . . . . . . . . . . . . . 54
handset . . . . . . . . . . . . . . . . . . . . . 22
keypad lock . . . . . . . . . . . . . . . . . . 22
listening in . . . . . . . . . . . . . . . . . . 59
muting ringtone . . . . . . . . . . . . . . 40
ring delay . . . . . . . . . . . . . . . . . . . 63
room monitor . . . . . . . . . . . . . . . . 61
two-way record . . . . . . . . . . . . . . . 49
Delete key. . . . . . . . . . . . . . . . . . . . . 20
Deleting
announcement for answering
machine . . . . . . . . . . . . . . . . . 47
characters . . . . . . . . . . . . . . . . . . . 20
message . . . . . . . . . . . . . . . . . . . . 48
De-registering (handset) . . . . . . . . . . 57
Destination number (room monitor) . 60
Dialling
using quick dial . . . . . . . . . . . . 34, 61
using the directory . . . . . . . . . . . . . 33
Dialling mode . . . . . . . . . . . . . . . . . . 69
Dialling pause . . . . . . . . . . . . . . . . . . 70
Directory . . . . . . . . . . . . . . . . . . . . . 32
copying number from text . . . . . . . 34
managing entries. . . . . . . . . . . . . . 33
opening . . . . . . . . . . . . . . . . . . . . 19
order of entries . . . . . . . . . . . . . . . 33
saving anniversary . . . . . . . . . . . . . 34
saving entry . . . . . . . . . . . . . . . . . 32
saving sender’s (SMS) number . . . . 41
sending entry/list to handset . . . . . 34
using to enter numbers . . . . . . . . . 34
Display
backlight . . . . . . . . . . . . . . . . . . . . 63
changing display language . . . . . . . 62
colour scheme . . . . . . . . . . . . . . . . 63
directory memory . . . . . . . . . . . . . 34
in idle status . . . . . . . . . . . . . . 16, 22
memory (resource directory) . . . . . 65
missed anniversaries . . . . . . . . . . . 37
missed appointments/
anniversaries . . . . . . . . . . . . . . 55
network mailbox message . . . . . . . 52
number (CLI/CLIP) . . . . . . . . . . . . . 28
screensaver . . . . . . . . . . . . . . . . . . 62
setting . . . . . . . . . . . . . . . . . . . . . 62
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / S795SIX.fm / 09.10.2009
Index
Display keys . . . . . . . . . . . . . . . . . . 2, 20
assigning . . . . . . . . . . . . . . . . . . . . 61
Disposal . . . . . . . . . . . . . . . . . . . . . . 74
Draft message list (SMS). . . . . . . . . . . 40
E
Earpiece volume . . . . . . . . . . . . . . . . 63
ECO DECT . . . . . . . . . . . . . . . . . . . . . 53
Eco mode . . . . . . . . . . . . . . . . . . . . . 53
Eco mode+ . . . . . . . . . . . . . . . . . . . . 53
E-mail address
copying from the directory . . . . . . . 34
End call key . . . . . . . . . . . . . . . . . . 2, 28
Ending, call . . . . . . . . . . . . . . . . . . . . 28
Entry
saving, changing (preselection) . . . . 38
selecting from directory . . . . . . . . . 33
Environment . . . . . . . . . . . . . . . . . . . 74
Error tone . . . . . . . . . . . . . . . . . . . . . 66
Expert mode . . . . . . . . . . . . . . . . 25, 71
External call
call waiting . . . . . . . . . . . . . . . . . . . 30
forwarding to ans. mach. . . . . . . . . 49
F
Fast access
answering machine . . . . . . . . . . . . 50
network mailbox . . . . . . . . . . . . . . . 52
Firmware update . . . . . . . . . . . . . . . . 78
G
General troubleshooting . . . . . . . . . . 71
Group call . . . . . . . . . . . . . . . . . . . . . 58
Guarantee Certificate . . . . . . . . . . . . . 73
Version 4, 16.09.2005
H
Handset
activating/deactivating . . . . . . . . . . 22
advisory tones . . . . . . . . . . . . . . . . 66
changing internal number . . . . . . . . 60
changing name . . . . . . . . . . . . . . . 59
changing the number . . . . . . . . . . . 60
changing to a different base . . . . . . 58
changing to best reception . . . . . . . 58
colour scheme . . . . . . . . . . . . . . . . 63
contact with liquid . . . . . . . . . . . . . 75
de-registering . . . . . . . . . . . . . . . . . 57
display backlight . . . . . . . . . . . . . . . 63
display language . . . . . . . . . . . . . . 62
earpiece volume . . . . . . . . . . . . . . 63
idle status . . . . . . . . . . . . . . . . . . . 22
large font . . . . . . . . . . . . . . . . . . . 63
list . . . . . . . . . . . . . . . . . . . . . . . . 19
locating . . . . . . . . . . . . . . . . . . . . . 57
muting . . . . . . . . . . . . . . . . . . . . . 29
paging . . . . . . . . . . . . . . . . . . . . . 57
registering . . . . . . . . . . . . . . . . . . . 57
registering to a different base . . . . . 58
restoring to factory settings . . . . . . 66
screensaver . . . . . . . . . . . . . . . . . . 62
set up for use. . . . . . . . . . . . . . . . . 12
setting . . . . . . . . . . . . . . . . . . . . . 61
speaker volume . . . . . . . . . . . . . . . 63
transferring a call . . . . . . . . . . . . . . 58
using multiple . . . . . . . . . . . . . . . . 57
using room monitor . . . . . . . . . . . . 60
Handset mode . . . . . . . . . . . . . . . . . 29
Handset operating time
in room monitor mode . . . . . . . . . . 60
Hash key . . . . . . . . . . . . . . . . . . . . 2, 22
Headset socket . . . . . . . . . . . . . . . . . 17
Hearing aids . . . . . . . . . . . . . . . . . . . . 8
Help . . . . . . . . . . . . . . . . . . . . . . . . . 71
I
Icon
alarm clock . . . . . . . . . . . . . . . . . . 56
answering machine . . . . . . . . . 46, 49
for new messages . . . . . . . . . . . . . 37
keypad lock . . . . . . . . . . . . . . . . . . 22
new message . . . . . . . . . . . . . . . . 47
new SMS . . . . . . . . . . . . . . . . . . . . 40
ringtone . . . . . . . . . . . . . . . . . . . . 64
Idle status (display) . . . . . . . . . . . 16, 22
Idle status, returning to . . . . . . . . . . . 22
Incoming message list (SMS) . . . . . . . 40
Incorrect entries (correction) . . . . . . . 20
Installing, base . . . . . . . . . . . . . . . . . 10
Internal
conference . . . . . . . . . . . . . . . . . . 58
consulting . . . . . . . . . . . . . . . . . . . 58
listening in . . . . . . . . . . . . . . . . . . 59
making calls . . . . . . . . . . . . . . . . . 58
Internal call. . . . . . . . . . . . . . . . . . . . 58
call waiting . . . . . . . . . . . . . . . . . . 59
85
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / S795SIX.fm / 09.10.2009
Index
K
Key
assigning to a function or
number . . . . . . . . . . . . . . . . . . 61
Key 1 (fast access) . . . . . . . . . . . . . 2, 50
Keypad lock . . . . . . . . . . . . . . . . . . . . 22
Keys
control key . . . . . . . . . . . . . . . . . 2, 19
delete key . . . . . . . . . . . . . . . . . . . . 20
display keys . . . . . . . . . . . . . . . . 2, 20
end call key . . . . . . . . . . . . . . . . 2, 28
fast access . . . . . . . . . . . . . . . . . 2, 50
hash key . . . . . . . . . . . . . . . . . . . 2, 22
message key . . . . . . . . . . . . . . . . . . . 2
mute key . . . . . . . . . . . . . . . . . . . . . 2
on/off key . . . . . . . . . . . . . . . . . . . . . 2
quick dial . . . . . . . . . . . . . . . . . . . . 34
recall key . . . . . . . . . . . . . . . . . . . . . 2
side keys . . . . . . . . . . . . . . . . . . . . . 2
speaker key . . . . . . . . . . . . . . . . . . . 2
star key . . . . . . . . . . . . . . . . . . . . . . 2
talk key . . . . . . . . . . . . . . . . . . . 2, 28
L
Language, display . . . . . . . . . . . . . . . 62
Large font . . . . . . . . . . . . . . . . . . . . . 63
Linking, see SMS
Liquid . . . . . . . . . . . . . . . . . . . . . . . . 75
List
answering machine . . . . . . . . . 36, 37
call lists . . . . . . . . . . . . . . . . . . . . . 36
handsets . . . . . . . . . . . . . . . . . . . . 19
missed calls . . . . . . . . . . . . . . . . . . 36
network mailbox . . . . . . . . . . . . . . . 37
SMS draft message list . . . . . . . . . . 40
SMS incoming message list . . . . . . . 40
SMS list . . . . . . . . . . . . . . . . . . . . . 37
Listening in to a call . . . . . . . . . . . . . . 59
Locating, handset . . . . . . . . . . . . . . . 57
Lock
activating/deactivating keypad lock . 22
Version 4, 16.09.2005
M
Mailbox ID, see SMS
Mailboxes, see SMS
Making calls
accepting a call . . . . . . . . . . . . . . . . 28
cost-effective calls . . . . . . . . . . . . . 38
external . . . . . . . . . . . . . . . . . . . . . 28
internal . . . . . . . . . . . . . . . . . . . . . 58
86
Manual redial . . . . . . . . . . . . . . . . . . 35
Medical equipment . . . . . . . . . . . . . . . 8
Memory
directory . . . . . . . . . . . . . . . . . . . . 34
resource directory . . . . . . . . . . . . . 65
Menu
end tone . . . . . . . . . . . . . . . . . . . . 66
opening . . . . . . . . . . . . . . . . . . . . 19
overview . . . . . . . . . . . . . . . . . . . . 25
using. . . . . . . . . . . . . . . . . . . . . . . 21
Menu display
expert mode . . . . . . . . . . . . . . 25, 71
standard mode . . . . . . . . . . . . 25, 71
Message key
open list . . . . . . . . . . . . . . . . . . . . 40
opening lists . . . . . . . . . . . . . . . . . 37
Messages . . . . . . . . . . . . . . . . . . . . . 46
copying the number to the
directory . . . . . . . . . . . . . . . . . 48
deleting. . . . . . . . . . . . . . . . . . . . . 48
key . . . . . . . . . . . . . . . . . . . . . . . . . 2
marking as "new" . . . . . . . . . . . . . . 48
new message icon . . . . . . . . . . . . . 47
playing back . . . . . . . . . . . . . . . . . 47
Microphone . . . . . . . . . . . . . . . . . . . . 2
Missed
anniversary . . . . . . . . . . . . . . . . . . 55
appointment . . . . . . . . . . . . . . . . . 55
Missed calls . . . . . . . . . . . . . . . . . . . 36
Music on hold . . . . . . . . . . . . . . . . . . 67
Mute key . . . . . . . . . . . . . . . . . . . . . . 2
Muting
first ringtone . . . . . . . . . . . . . . . . . 40
handset . . . . . . . . . . . . . . . . . . . . . 29
N
Name
of a handset . . . . . . . . . . . . . . . . .
Network mailbox. . . . . . . . . . . . . . . .
Network provider preselection,
automatic . . . . . . . . . . . . . . . . .
Network services. . . . . . . . . . . . . . . .
Notification via SMS . . . . . . . . . . . . .
Number
as destination for room monitor . . .
copying from an SMS text . . . . . . .
copying from directory . . . . . . . . . .
copying to the directory . . . . . . . . .
displaying caller's number (CLIP) . . .
entering with directory. . . . . . . . . .
59
52
38
30
42
60
42
34
34
28
34
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / S795SIX.fm / 09.10.2009
Index
saving in directory . . . . . . . . . . . . . 32
O
Q
On/Off key . . . . . . . . . . . . . . . . . . . . . . 2
Operating remotely . . . . . . . . . . . . . . 50
Order in directory . . . . . . . . . . . . . . . . 33
Questions and answers . . . . . . . . . . . 71
Quick dial . . . . . . . . . . . . . . . . . . 32, 61
P
Range . . . . . . . . . . . . . . . . . . . . . . . . 10
Recall . . . . . . . . . . . . . . . . . . . . . . . . 69
Recall key . . . . . . . . . . . . . . . . . . . 2, 70
Reception booster, see Repeater
Recording
quality . . . . . . . . . . . . . . . . . . . . . . 49
time . . . . . . . . . . . . . . . . . . . . . . . 49
two-way record . . . . . . . . . . . . . . . 49
Redial . . . . . . . . . . . . . . . . . . . . . . . . 35
Redirect, see Call divert
Registering (handset) . . . . . . . . . . . . 57
Reminder call . . . . . . . . . . . . . . . . . . 35
Repeater . . . . . . . . . . . . . . . . . . . . . . 67
Resource directory . . . . . . . . . . . . . . 65
Ring delay . . . . . . . . . . . . . . . . . . 49, 63
Ringback. . . . . . . . . . . . . . . . . . . . . . 30
Ringtone
changing . . . . . . . . . . . . . . . . . 64, 67
muting . . . . . . . . . . . . . . . . . . . . . 40
setting volume . . . . . . . . . . . . 64, 67
Ringtone deactivated for unknown
call . . . . . . . . . . . . . . . . . . . . . . 64
Room monitor. . . . . . . . . . . . . . . . . . 60
PABX
connecting base . . . . . . . . . . . . . . . 69
pauses . . . . . . . . . . . . . . . . . . . . . . 70
saving access code . . . . . . . . . . . . . 69
setting dialling mode . . . . . . . . . . . 69
setting recall. . . . . . . . . . . . . . . . . . 69
SMS . . . . . . . . . . . . . . . . . . . . . . . . 44
switching to tone dialling . . . . . . . . 70
Package contents . . . . . . . . . . . . . . . . . 9
Paging . . . . . . . . . . . . . . . . . . . . . . . . 57
Pause
after access code . . . . . . . . . . . . . . 70
after line seizure . . . . . . . . . . . . . . . 70
after recall key . . . . . . . . . . . . . . . . 70
PC interface . . . . . . . . . . . . . . . . . . . . 77
PD (pulse dialling) . . . . . . . . . . . . . . . 69
Picture
Caller . . . . . . . . . . . . . . . . . . . . 32, 65
deleting . . . . . . . . . . . . . . . . . . . . . 65
renaming . . . . . . . . . . . . . . . . . . . . 65
PIN change
system PIN . . . . . . . . . . . . . . . . . . . 68
Pin connections . . . . . . . . . . . . . . . . . 76
Playing back
announcement (answering
machine) . . . . . . . . . . . . . . . . . 47
message (answering machine) . . . . 47
Power adapter . . . . . . . . . . . . . . . . . . . 8
Power consumption . . . . . . . . . . . . . . 76
Preselection . . . . . . . . . . . . . . . . . . . . 38
cancelling. . . . . . . . . . . . . . . . . . . . 38
Protecting the phone against access . . 68
Version 4, 16.09.2005
Pulse dialling . . . . . . . . . . . . . . . . . . 69
R
S
Saving (access code) . . . . . . . . . . . . . 69
Screensaver . . . . . . . . . . . . . . . . . . . 62
Search directory . . . . . . . . . . . . . . . . 33
Sending
directory entry to handset . . . . . . . 34
Sensitivity (room monitor) . . . . . . . . . 61
Service . . . . . . . . . . . . . . . . . . . . . . . 71
Setting the date . . . . . . . . . . . . . 15, 27
Setting the time . . . . . . . . . . . . . 15, 27
87
Gigaset S790/S795 / GBR / A31008-M2102-L101-1-7619 / S795SIX.fm / 09.10.2009
Index
Version 4, 16.09.2005
Setting up
handset . . . . . . . . . . . . . . . . . . . . . 12
Side keys . . . . . . . . . . . . . . . . . . . . . . . 2
Signal tone, see Advisory tones
SMS . . . . . . . . . . . . . . . . . . . . . . . . . 39
active send service centre . . . . . . . . 43
changing mailbox . . . . . . . . . . . . . . 43
deleting . . . . . . . . . . . . . . . . . . 40, 41
draft message list . . . . . . . . . . . . . . 40
forwarding . . . . . . . . . . . . . . . . . . . 41
incoming message list. . . . . . . . . . . 40
linked . . . . . . . . . . . . . . . . . . . . . . . 39
list . . . . . . . . . . . . . . . . . . . . . . . . . 37
mailbox ID . . . . . . . . . . . . . . . . . . . 42
mailboxes . . . . . . . . . . . . . . . . . . . . 42
notification by SMS . . . . . . . . . . . . . 42
PIN protection. . . . . . . . . . . . . . . . . 43
reading . . . . . . . . . . . . . . . . . . 40, 41
receiving . . . . . . . . . . . . . . . . . . . . 40
replying to or forwarding . . . . . . . . 41
saving number . . . . . . . . . . . . . . . . 41
self help with error messages . . . . . 45
sending to a personal mailbox . . . . . 43
to PABXs . . . . . . . . . . . . . . . . . . . . . 44
troubleshooting . . . . . . . . . . . . . . . 45
vCard . . . . . . . . . . . . . . . . . . . . . . . 42
writing . . . . . . . . . . . . . . . . . . . 39, 76
SMS centre
changing number . . . . . . . . . . . . . . 44
setting . . . . . . . . . . . . . . . . . . . . . . 43
Snooze mode. . . . . . . . . . . . . . . . . . . 56
Sound, see Ringtone
Speaker
key . . . . . . . . . . . . . . . . . . . . . . . . . . 2
mode . . . . . . . . . . . . . . . . . . . . . . . 29
Special functions . . . . . . . . . . . . . . . . 69
Specifications . . . . . . . . . . . . . . . . . . 75
Standard mode . . . . . . . . . . . . . . 25, 71
Star key . . . . . . . . . . . . . . . . . . . . . . . . 2
System settings . . . . . . . . . . . . . . . . . 68
88
T
Talk key . . . . . . . . . . . . . . . . . . . . 2, 28
Telephone jack, pin connections . . . . 76
Text message, see SMS
Tone dialling . . . . . . . . . . . . . . . . 69, 70
Troubleshooting (SMS) . . . . . . . . . . . 45
U
Unknown . . . . . . . . . . . . . . . . . . . . .
Unknown caller . . . . . . . . . . . . . . . . .
Update . . . . . . . . . . . . . . . . . . . . . . .
USB connection. . . . . . . . . . . . . . . . .
29
29
78
17
V
vCard (SMS) . . . . . . . . . . . . . . . . . . . 42
Viewing the network mailbox
message. . . . . . . . . . . . . . . . . . . 52
Volume
earpiece . . . . . . . . . . . . . . . . . . . . 63
handset speaker volume. . . . . . . . . 63
loudspeaker . . . . . . . . . . . . . . . . . . 63
ringtone . . . . . . . . . . . . . . . . . 64, 67
W
Warning tone, see Advisory tones
Writing (SMS) . . . . . . . . . . . . . . . . . . 39
Writing and editing text . . . . . . . . . . . 76