Siemens Gigaset 150 Operating instructions

Gigaset AS150 / English / A31008-M1811-R601-3-TN19 / Wytana.fm / 05.05.2008
1
Gigaset AS150 english
Handset AS15
1 Charge status of the
battery pack
2 Internal number of the
handset
3 Display keys
4 Talk key
5 Directory key
6 End call and
On/Off key
7 Ringer on/off
(long press)
8 keypad lock
(long press)
9 Recall key
- Confer (Flash)
- Dial pause
(long press)
10 Microphone
11 Speed dial list key
Base
1
2
V
22-35
Þ Ü INT MENU
Register/Paging key
(page 4/page 5)
1
Display keys:
Pressing the keys launches whichever function
appears above them in the display.
3
Display
icon
4
5
Þ
6
Ü
Move cursor to the left/right.
ß
Backspace deletes one character at
a time.
Confirm menu function or store an
entry.
and s
8
9
10
11
and v
OK
Do not install the phone in a bathroom or
shower room as the handset and base are not
splash-proof. (page 7)
Read this manual and the safety precautions carefully before use. Explain their contents to your
children, and the potential hazards associated
with using the telephone.
$
u
MENU
Safety precautions
W
t
Open the last number redial list
(page 4).
Open the calls or network mailbox
list (page 4).
Open the list of registered handsets (page 5).
Open main menu/submenu.
Scroll up/down, or adjust volume.
INT
7
Only use the mains unit supplied.
Fit only the approved rechargeable battery
pack! Never use a conventional (non-rechargeable) battery pack as this could damage your
health and cause injury. Use the battery pack as
directed in these instructions (page 6).
The operation of medical appliances may be
affected. Be aware of the technical conditions
within the particular environment (e.g. doctor's
practice).
The handset may cause an intrusive 'hum' in
hearing aids. Do not hold the handset against
your ear while it is ringing (incoming call).
Meaning when pressed
Do not use the telephone in environments
subject to explosion hazard (e.g. auto paint
shops).
ƒ
If you give your Gigaset to someone else, make
sure you also give them the operating manual.
Dispose of the battery pack and telephone in
accordance with environmental regulations.
Do not pollute the environment. Emergency numbers cannot be dialled if the keypad lock (page 3) is activated!
Not all of the functions described in this manual are available in all countries.
Gigaset AS150 / English / A31008-M1811-R601-3-TN19 / Wytana.fm / 05.05.2008
2
Setting up the telephone for use
◆ To close the battery compartment, position the
cover and press until it snaps home.
Step 1: Connecting the base
1
2
Connect the phone jack with the phone cord 1
and the mains units (230 V) with the power cord
2 as shown. Place the cords in the cord recesses.
The two cords must be plugged in at all times.
◆ Only use the supplied mains unit (see the bottom of the base) and the supplied phone cord.
◆ If you ever purchase another phone cord from a
store, ensure that the phone conductors are correctly connected: 3-4 connection of the telephone
conductors/EURO CTR37.
Step 2: Setting up the handset
Fitting the battery pack
◆ To open the battery compartment, push the
tongue on the battery cover inwards (see picture on left) and lift off the cover.
◆ Fit the left side of the battery pack under the
clips then press down on the right side so that
the pack snaps home.
◆ Plug the jack firmly into the socket (see picture
on right).
W
◆ Place the battery leads in the cable
guides so that the battery cover cannot
catch on the leads and damage them
when it is closed.
◆ Only insert the recommended rechargeable battery pack, i.e. never use a
normal battery pack as this could damage
your health and cause injury.
◆ Never use non-Siemens battery chargers as this could damage the battery pack.
◆ Only place the handset in the base/
charging cradle that is intended for it.
Step 3: Registering the handset to the
base and charging the battery pack
Place your handset in the base with the display
facing forwards. The handset will now register
automatically to the base. For procedure see
page 4.
Charging the battery pack
To charge the battery pack, leave the handset in
the base for approx. ten hours. The battery pack is
now fully charged. The charge status of the battery
pack is correctly displayed only after uninterrupted
charging/discharging. You should not therefore
interrupt the charging process.
Charging is electronically controlled to prevent
overcharging. The battery pack heats up during
charging; this is normal and not dangerous. After
a time the charge capacity of the pack will
decrease for technical reasons.
You must set the date and time to ensure that the
times of calls are logged correctly (page 9). Your
telephone is now ready to use.
If you have any queries about the use of your telephone, please read the tips under "Questions and
answers" (page 7) or contact our service (Customer Care, page 8).
Activating/deactivating the handset
Press the 'end call' key a and hold.
If you place a deactivated handset in the base station or charger, it will automatically activate.
Gigaset AS150 / English / A31008-M1811-R601-3-TN19 / Wytana.fm / 05.05.2008
3
Activating/deactivating the keypad lock
You can "lock" the keys on the handset to protect
the keypad against inadvertent activation.
To activate: press the hash key R and hold.
The display shows the icon Ø.
To deactivate: press the hash key R and hold.
The keypad lock deactivates automatically when
you receive a call and activates again after the call.
When the keypad lock is active you cannot even
call emergency numbers!
Making calls
Making external calls/Ending a call
External calls are calls using the public telephone
network.
~ (Enter the number) c.
The number is dialled. (Or you can first press c
[dial tone] and then enter the number.) During the
call you can adjust the earpiece volume with t
and s.
End the call/cancel dialling:
Press the end call key a.
You can automatically insert a network provider
prefix before any number (see Menu Tree, PRESELECT, page 9).
¢
Answering a call
Your handset rings and you wish to take the call:
Press the talk key c.
If "Auto Answer" is active (page 6) just lift the
handset out of its base/charging cradle.
Press the display key INT. The call is 'held' (wait
melody).
To cancel the function: Press a briefly.
Using the directory and other
lists
Directory and speed dial list
These two lists are used in the same way.
To open the directory: Press h.
To open the speed dial list: Press C.
Directory: Can store up to 20 numbers and associated names.
Speed dial list: Can store up to 8 numbers (12 digits max.), e.g. private phone numbers, prefixes of
network providers ("Call-by-Call") etc.
Press the h or C key to open the required list
then press MENU. The following functions are
available:
EDIT ENTRY
Add/edit number and use to
dial
NEW ENTRY
Save new phone number
SHOW ENTRY
Show/edit number
DELETE
Delete a single entry
Clear the list: h/C
Storing a number in the directory/speed dial list
h/C¢ MENU ¢ NEW ENTRY
~OK
Enter phone number and confirm.
~OK
Directory: Enter name and confirm.
Speed dial: Enter the digit of the
required speed dial key (2–9), then
enter the name and confirm.
a
Long press (back to idle status).
Calling Line Identification
When you get a call, the caller's number will be displayed on your handset; the caller's name will be
displayed if it is stored in the directory .
Requirements:
1 You have asked your network provider for the
caller's number (CLIP) to be displayed on your
handset screen.
2 The caller has asked the network provider for
his number to be identified (CLI).
The display shows
if you have not requested
CLIP, WITHHELD if the caller has withheld CLI, or
UNAVAILABLE if it has not been requested.
Muting
You can mute you handset when making external
calls. The other party hears a wait melody. You do
not hear your caller either.
¢MENU¢L ¢OK.
Table for text/numerical entry: see page 6.
Cursor control: see page 1.
Dialling with the directory
h
Open the directory.
~
Enter the first letter of the name.
s
If there is more then one entry,
select the name.
c
Press the talk key.
Speed dialling
Example: Press key I long
¢ c.
Gigaset AS150 / English / A31008-M1811-R601-3-TN19 / Wytana.fm / 05.05.2008
4
Last number redial list
This list contains the five last dialled numbers.
Þ (open the list)
MENU.
The following functions are available:
¢
EDIT ENTRY
Add/edit number and use to
dial
COPY TO DIR
Store number in directory
Clear the list: Þ
¢MENU¢L ¢OK.
Dialling a number
You can select a number from the last number
redial list:
Þ
Select an entry
c.
¢
¢
Calls list/Select services list
Press the display key Û to open the caller list and
select services list (see Menu Tree, page 9).
Calls list: The number of the last 30 missed calls
are stored.
When the phone is in idle status, new missed calls
are indicated by a flashing Û .
Example of how the calls list appears:
CALLS 02/08
Number of old, read entries
Number of new entries
Opening the calls list and selecting an entry
You can view entries you have already read.
Û
s CALLS
Open calls list.
OK
Confirm.
The last incoming call is displayed.
Select entry.
s
Using the calls list
¢
¢
Û
Select an entry (see above)
MENU.
The following functions are available:
DELETE
Delete an individual number
COPY TO DIR
Store a number in the directory. Enter name
TIME
Establish date and time of a call
STATUS
Read or not read
DELETE LIST
Delete complete calls list
Calling back a caller from the calls list:
Û
Select an entry
c.
¢
¢
Registering and de-registering
handsets
You can register up to four handsets on your base
station.
A Gigaset AS15handset that is not yet registered on
a base is registered automatically. Other handsets
must be registered manually.
Automatic registering:
Gigaset handset AS15
Any Gigaset AS15handset that is not registered to
a base can be registered automatically. To register
a handset for the first time, place it in the base with
the display facing forward. Registering takes
about 1 minute; a number of icons flash in the display. The handset is automatically assigned the
next available internal number (1–4). This number
appears in the top left of the display after successful registering, e.g. "2". If all of the internal numbers 1 to 4 are used up (i.e. four handsets have
been registered), handset number 4 is de-registered and overwritten.
Manual registering:
Gigaset handset AS15
¢
¢
1. On the handset: MENU
REGISTER HS
enter your system PIN (default is 0000)
OK.
The display shows REGISTER HS during the registration procedure.
2. On the base: Within 60 sec. of entering the system PIN, press the register/paging key on the front
of the base (page 1) and hold for approx. 3 sec.
The registration process starts.
¢
Manual registering: Other handsets
Other handsets are registered as follows:
1. On the handset: Start to register your handset
as described in its operating instructions.
2. On the base: Press the register/paging key on
the front of the base (page 1) for approx. 3 sec.
The registration process starts.
Gigaset AS150 / English / A31008-M1811-R601-3-TN19 / Wytana.fm / 05.05.2008
5
De-registering handsets
Barging in on an external call
You can de-register another handset from any registered Gigaset AS15handset as follows:
INT
Select handset
MENU
You are conducting an external call. An internal
party can 'barge in' on your call and join in the conversation (all parties hear a beep). Requirement:
The BARGE IN function is activated.
¢
¢
¢
¢ OK¢
Enter the system PIN (default is 0000) ¢ OK ¢
DE-REGISTER? ¢ OK ¢ a.
DE-REG H/SET
The internal number disappears from the de-registered handset. Handsets that have not been deregistered retain their internal number.
Using several handsets
Internal calls
Internal calls are no-cost calls to other handsets
that are registered to the same base.
Press the display key.
Your own handset is marked "<".
INT
either ...
Call a single handset:
or ...
Press the star key.
... then
Ending the call:
Press the end call key.
a
Internal conference/Call connecting
You are in conversation with an external caller.
To confer:
INT (the external party hears the wait melody)
Select a handset
c (confer with internal
party).
End: MENU
GO BACK
OK.
You are reconnected with the external caller.
Or to connect the call:
INT
Select a handset
c (announce the
call if required)
a Press the end call key.
You can also press the end call key a immediately (without announcing the call). If the internal
party does not answer or is busy the call will come
back to you automatically.
¢
¢
¢
¢
¢
¢
¢
¢ ADD FEATURES ¢
Internal barge-in
The display shows LINE IN USE. You wish to barge
in on the call.
c Press the talk key.
You are connected. All parties hear a signal tone.
The display shows LISTENING IN.
End: a Press the end call key.
If one of the internal parties presses the end call
key a, a signal tone sounds. This does not affect
the connection between the other handset and the
external caller.
If you have mislaid your handset you can page it
with the help of the base. To do this, briefly (2 seconds max.) press the register/paging key on the
front of the base (page 1). All handsets will ring at
the same time.
End paging: Briefly press the registration/paging
key (on the base) or the talk key c on any handset.
Calling all handsets:
P
¢
MENU
BASE SET
BARGE IN (‰ = on).
Looking for a handset ("paging")
Enter number of handset,
e.g. 2.
~
Activating/deactivating internal barge-in
i
Pressing the registration/paging key for
more than 2 seconds puts the base into
registration mode. The handsets will not
ring in this case.
Gigaset AS150 / English / A31008-M1811-R601-3-TN19 / Wytana.fm / 05.05.2008
6
Handset settings
Changing the display language
You can view the display texts in different languages.
MENU
O2
Select language
(e.g. digit combination Q1 for German)
¢
Q
Q
Q
Q
Q
1
2
I
4
5
¢
Q
Q
Q
Q
1
German
English
French
Slovenian
Hungarian
L
M
N
O
Q
¢
Appendix
Character set chart
Croat
Press the required key the number of times indicated.
Czech
Polish
Russian
When you get a call you can simply lift the handset
out of the base or charger without having to press
the talk key c.
To activate: MENU
O 1 1.
To deactivate: MENU
O 1 Q.
¢
¢
Activating/deactivating battery warning
tone
If this function is activated, a beep sounds in idle
status when the battery pack is almost flat.
To deactivate: MENU
O 4 Q.
To activate: MENU
O 4 1.
¢
¢
Resetting the handset
Restoring the factory settings of the handset will
not affect entries in the directory, the calls list or
the speed dial list or the handset's registration to
the base.
¢ OI ¢ RESET ? ¢ OK.
Base station settings
Changing pause after line seizure
You can change the length of the pause that is
inserted between pressing the talk key c and
sending the number:
MENU
NO1L
The digit for the current
pause length flashes: 1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec.; 4 = 2.5 sec.
Enter digit
OK.
¢
¢
¢
Romanian
Activating/deactivating Auto Answer
¢
¢
To insert a dial pause: press S for 2 seconds. A “P”
appears in the display.
Q
1
MENU
¢
NO12
The digit for the current
pause length flashes: 1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms
Enter digit
OK.
MENU
¢
Changing the pause after the Recall key
(dial pause)
You can change the length of the dial pause if your
PABX requires this (refer to the operating instructions of the PABX):
1x
2x
3x
4x
5x
6x
+
0
-
|
?
_
Space
1
R
# (appears in display as j)
P
*
/
(
)
,
Specifications
Power consumption
In ready status: approx. 2 Watt. During charging:
approx. 3 Watt. During a call: approx. 2 Watt.
General specifications
Standard
Range
Mains unit
Operating temperature
Dimensions/Handset
Dimensions/Base
Weight/Handset
Weight/Base
Re-chargeable battery
pack
Battery pack re-order
number
Battery pack capacity
Charging time
Calling time
Standby time
DECT and GAP (compatible)
up to 300 m outdoors, up to 50
m indoors
230 V ~/50 Hz
+5 °C to +45 °C
155 x 56 x 28 mm (L × W × H)
85 x 113 x 68 mm (L x W x H)
approx. 116 g (including battery pack)
approx. 94 g
NiMH, 2xAAA Pack
V30145-K1310-X383
approx. 410 mAh
approx. 10 hours in base,
approx. 5 hours in charging
shell
up to 9 hours
up to 130 hours (5 days)
Gigaset AS150 / English / A31008-M1811-R601-3-TN19 / Wytana.fm / 05.05.2008
7
Care
Problem
Wipe the base station, charging cradle and handset
with a damp cloth (do not use solvent) or an antistatic cloth.
Never use a dry cloth. This can cause static.
Contact with liquid
Questions and answers
If you have any queries about the use of your telephone, go to
www.siemens.com/gigasetcustomercare
for assistance 24/7. The table below contains a list
of common problems and possible solutions.
Cause
Forgot PIN
!
If the handset has come into contact with liquid:
1 Switch off the handset and remove the battery pack immediately.
2 Allow the liquid to drain from the handset.
3 Pat all parts dry, then place the handset with
the battery compartment open and the keypad
facing down in a dry, warm place for at least
72 hours (not in a microwave, oven etc.).
4 Do not switch on the handset again until it is
completely dry.
When it has fully dried out, you will normally be
able to use it again.
Problem
Cause
Error tone
The system PIN
after entering entered is incorsystem PIN.
rect.
Solution
Nothing
The handset is not Press the end call
key a for approx.
appears in the switched on.
display.
5 seconds or place
the handset in the
base.
Battery pack is
Charge/replace the
flat.
battery pack (page 2).
No response The keypad lock is Press the hash key R
to key press, activated.
for approx. 2 sec
"HOLD KEY"
(page 3).
appears in the
display.
Move the handset
The handset is
No wireless
connection to outside the range closer to the base.
the base, dif- of the base.
The handset is not Register the handset
ferent icons
(page 4).
registered.
flash in the
Check the power conThe base is not
display.
nector at the base
switched on.
(page 2).
Cords not routed Check cord routing
(page 2).
correctly
Please always use the
The supplied
You cannot
phone cord was supplied phone cord
hear a ring/
dialling tone not used or it has and ensure that the
from the fixed been replaced by pin connections are
a new cord with correct when purchasnetwork.
ing a new one
the wrong pin
(page 2).
assignment.
Solution
Restore the system
PIN to the factory setting (0000). To do this
disconnect the mains
unit ¢hold down the
paging-key ¢reconnect the mains unit¢
hold the paging key
down for at least a
further 2 seconds
then release it.
The resetting procedure is carried out.
The handsets are
deregistered. The
calls list is deleted.
Authorisation
This device is intended for analogue phone
lines in your network.
Country-specific requirements have been
taken into consideration.
We, Siemens Home and Office
Communication Devices GmbH & Co. KG,
declare that this device meets the essential
requirements and other relevant regulations
laid down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of
Conformity is available at this Internet
address:
http://www.siemens.com/gigasetdocs.
Gigaset AS150 / English / A31008-M1811-R601-3-TN19 / Wytana.fm / 05.05.2008
8
Service (Customer Care)
You can get assistance easily when you have technical questions or questions about how to use your device
by using our online support service on the Internet at:
http://www.siemens.com/gigasetcustomercare
This site can be accessed at any time wherever you are. It will give you 24/7 support for all our products. It
also a list of FAQs and answers plus user guides for you to download. You will also find frequently asked
questions and answers in the Questions and Answers section of this user guide in the appendix.
If the device needs to be repaired, please contact one of our Customer Care Centers:
Abu Dhabi. . . . . . . . . . . . .97 12 62 23 800
Argentina . . . . . . . . . . . . . 0800-888-9878
Australia . . . . . . . . . . . . . . . .1300 665 366
Austria . 05 17 07 50 04 (0,065 Euro/Min.)
Bahrain . . . . . . . . . . . . . . .97 31 73 11 173
Belgium . . . . . . . . . . . . . . . . 0 78 15 66 79
Bosnia Herzegovina . . . . . . . . 033 276 649
Brazil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Grande Capitais e Regiões Metropolitanas:
. . . . . . . . . . . . . . . . . . . . . . . . . 4003 3020
. . . . . . . . . . . . . . . . . .R$ 0,14 (US$ 0,069)
Demais localidades: . . . . . 0800 888 3020
. . . . . . . . . . . . . . . . . .R$ 0,20 (US$ 0,098)
Bulgaria. . . . . . . . . . . . . . . . . 02 873 94 88
Canada . . . . . . . . . . . . . . . . .866 247 8758
China . . . . 0 21 400 670 6007 (RMB 0.11)
Croatia . . . . . . . . 016 10 53 81 (0,23 Kun)
Czech Republic . . . . . . . . . . . . 233 032 727
Denmark . . . . . . . . . . . . . . . . . 35 25 86 00
Dubai . . . . . . . . . . . . . . . .97 14 39 69 944
Egypt. . . . . . . . . . . . . . . . . . . 202 7623441
Finland . . . . . . . . . . . . . . . . 09 23 11 34 25
France. . . 01 56 38 42 00 (Appel national)
Germany . . . . . . . . . . . . . . .01805 333 222
(0,14 Euro/Min. aus dem Festnetz der Deutschen Telekom. Für Anrufe aus den Mobilfunknetzen können abweichende Preise
gelten)
Greece . . . . . . 801 1000 500 (0,026 Euro)
Hungary . . . . . . . . . 06 14 71 24 44 (27 Ft)
Ireland . . . . . . . . . . . . . . . . 18 50 77 72 77
Italy. . . . . . . . . . . . . . . . . . . . 199.15.11.15
Jordan . . . . . . . . . . . 00962 6 5625460/1/2
Kuwait . . . . . . . . . . . . . . . 00965-2464993
Latvia . . . . . . . . . . . . . . . . . . . . . 7 50 11 18
Lebanon. . . . . . . . . . . . . . 00961-1236110
Luxembourg . . . . . . . . . . . 40 66 61 56 40
Malaysia. . . . . . . . . . . . . . . .603 77124304
Malta . . . . . . . . . . . . . . +353 21 4940 632
Mexico . . . . . . . . . . . . . .01 80 07 11 00 03
Netherlands
. . . . . . . . .0900-3333102 (0,25 Euro/min.)
New Zealand . . . . . . . . . . . 08 00 27 43 63
Norway . . . . . . . . . . . . . . . . . . 22 70 84 00
Oman. . . . . . . . . . . . . . . . 96 82 47 09 281
Poland . . . . . . . . . . . . . . . . . 0 801 140 160
Portugal . . . . . . . . . . . . (351) 808 781 223
Romania . . . . . . . . . . . . . . 02 12 04 91 00
Russia. . . . . . . . . . . . . . . 8 (495) 228 1312
Serbia. . . . . . . . . . . . . . . . . . 0800 222 111
Singapore . . . . . . . . . . . . . . . . 62 27 11 18
Slovak Republic
. . . . . . . . . . . . . 02 59 68 22 66 (4,428 sk)
Slovenija . . . . . . . . . . . . . . . 0 14 74 63 36
South Africa. . . . . . . . . . . . 08 60 10 11 57
Spain . . . . . . . . . . . . . . . . . . . . 902 103935
Sweden . . . . . . . . . . . . . . . . . 08 750 99 11
Switzerland
. . . . . . . . . . 0848 212 000 (0,08 SFr./Min.)
Taiwan . . . . . . . . . . . . . . . . 02 23 96 10 06
Thailand. . . . . . . . . . . . . . . . . 02 722 1118
Turkey . . . . . . . . . . . . . . . 0 21 64 59 98 59
Ukraine . . . . . . . . . . . .+380-44-451-71-72
United Arab Emirates . . . . . 0 43 66 03 86
United Kingdom . . . . . . . 0 84 53 67 08 12
USA . . . . . . . . . . . . . . . . . 1-866 247-8758
. . . . . . . . . . . . . . . . . . . . . . . . . . . (toll free)
Please have your record of purchase ready when calling.
Replacement or repair services are not offered in countries where our product is not sold by
authorised dealers.
Gigaset AS150 / English / A31008-M1811-R601-3-TN19 / Wytana.fm / 05.05.2008
9
Menu tree
Your phone has an extensive range of features.
These are offered in the form of menus.
With the phone in the idle status, press MENU
(open menu), scroll to the required function and
then press OK to confirm your choice.
1
SEL SERVICES
1-1
WITHHOLD NO
1-2
CALL WAITING
1-3
RINGBACK OFF
1-4
CALL DIVERT
To return to idle status: press key a long.
There are two ways in which you can access a function:
◆ Scroll with keys t and s,
◆ Key in the appropriate digit combination,
e.g. MENU I 1 2 to set the time.
Select services are functions provided by your network provider.
You can only use these services if you have requested them from
your network provider. Your network provider can supply further
information about these functions.
When you have chosen a select service, do not hang up until after
the confirmation tone from the phone network.
The following select services are available during the call when you press the MENU display key: RINGBACK, ACCEPT,
REJECT, EXTN CALL, END CALL, CONFERENCE, END CONF.
2
3
AUDIO SET UP
BASE SET
2-2
RINGER
5 level settings + "Crescendo" + OFF
2-3
MELODY
10 selectable melodies
3-1
DATE/TIME
3-1-1
DATE SET
Input format: DDMMYY
3-1-2
CLOCK SET
Input format: HHMM
3-1-3
CLOCK MODE
Select 12 or 24 hour clock
3-2
SYSTEM PIN
Change system PIN (default is 0000)
3-3
BASE RESET
Restore factory settings (system PIN does not change, handsets are
still registered)
3-4
ADD FEATURES
3-4-1
DIAL MODE
3-4-2
TBR
3-4-3
BARGE IN
3-5-1
PRESELECT NO
3-5
4
ANS MACHINE
4-1
PRESELECT
Select between TONE and PULSE
Use s to select the setting
Activate/deactivate the function
Network provider prefix to be inserted
automatically before any dialled
number.
MAILBOX
MAILBOX --> Store the number of the network mailbox for fast access (for dialling, press
the 1 key and hold in idle status).
Network mailbox: Your service provider's answering machine; must be ordered separately. The network mailbox list can be displayed if your network service provider supports
this function and the mailbox has been defined for fast access.
5
REGISTER HS