Trendnet TU2-ET100 USB to 10/100Mbps Adapter User's Guide

- i -

Mac 10.4.x Installation

1. Insert the provided CD into your CD-ROM drive. Copy the archive file under the directory of \Driver\Mac10.4\ to the desktop and then double-click the file until you locate the setup file.

2. Double-click the setup file “AX88772”.

3. When the welcome screen appears, click Continue.

4. Select a destination disk to install the driver and click Continue.

field and click OK.

8. When the software was successfully installed, click Restart.

9. After the restart, plug the Ethernet adapter’s USB cable into an available USB port on your computer. Then attach one end of an Ethernet cable to the

Ethernet port on the adapter and the other end to your network switch, hub or router.

10. Mac system will detect the new hardware and show the name of the adapter, e.g. Ethernet Adapter (en1) as in the example below.

Configuring Network Settings and Making a Connection

System Preferences. Then double-click the Network icon.

Ethernet Adapter (en1). Configure the network settings as required by your network and then click Apply Now.

Configure the network settings as required by your network environment.

3. To make a connection, select Network Status from the Show drop-down list and highlight the adapter representing the USB Ethernet adapter and click

Connect to establish a network connection.