TM-5-4310-277-25P

TM 5-431O-277-25P

DEPARTMENT OF THE ARMY TECHNICAL MANUAL

ORGANIZATIONAL, DIRECT AND GENERAL SUPPORT,

AND DEPOT MAINTENANCE REPAIR PARTS

AND SPECIAL TOOLS LIST

COMPRESSOR, RECIPROCATING, AIR, 15 CFM, 175

PSI, TANK MOUNTED, GED. (CHAMPION PNEUMATIC

MODEL HGR5-8M-1) FSN 4310-880-0186

COMPRESSOR, RECIPROCATING, AIR, 15 CFM, 175

PSI, TRAILER MOUNTED, GED. (CHAMPION

PNEUMATIC MODEL BGR-5M-1) FSN 4310-852-1745

This copy is a reprint which includes current pages from Changes 1 through 4

H E A D Q U A R T E R S , D E P A R T M E N T O F

THE A R M Y

NOVEMBER 1968

CHANGE

No. 4

C h a n g e s i n f o r c e :

C1, C2, C3 and C4

TM 5-4310-277-25P

C 4

HEADQUARTERS

DEPARTMENT OF THE ARMY

WASHINGTON, D.C., 26 March 1987

O r g a n i z a t i o n a l ,

D i r e c t a n d G e n e r a l S u p p o r t and Depot Maintenance

R e p a i r P a r t s a n d S p e c i a l T o o l s L i s t

COMPRESSOR, RECIPROCATING, AIR, 15CFM, 175PSI, TANK MOUNTED, GED,

(CHAMPION PNEUMATIC MODEL HGR5-8M-1) NSN 4310-00-880-0186 AND

(CHAMPION PNEUMATIC MODEL HGR5-8M-6) NSN 4310-00-880-0186

COMPRESSOR, RECIPROCATING, AIR, 15CFM, 175PSI, TRILER MOUNTED, GED,

(CHAMPION PNEUMATIC MODEL BGR-5M-1) NSN 4310-00-852-1745)

TM 5-4310-277-25P, November 1968, is changed as follows:

Page 1, Index No.

00005 is changed to read: Col. 1, SMR Code: PAFHH; Col. 2, FSN:

2 8 0 5 - 0 1 - 1 3 9 - 0 5 9 6 ; C o l . 3 , R e f e r e n c e N o . : (97403); Col. 3, MFR Code: 13206E0000-3.

Page 3, Index No.

0 0 0 3 4 , i s c h a n g e d t o r e a d : C o l . 1 , S M R C o d e : P B .

Page 8 of Change 3, add to bottom of page:

F i g u r e

No.

I tern

No.

Reference No. &

MFR Code

V a l v e , S a f e t y ( 1 1 5 6 8 )

2 2 0 6 - 2 0 0 (% inch)

T e e (% i n c h ) ( 1 1 5 6 8 )

M1003B

N i p p l e (% i n c h ) ( 1 1 5 6 8 )

M1015B

3 . 1

3.1

3 . 1

12

14

15

Page 29, Index No.

0 0 0 7 3 i s c h a n g e d t o r e a d : C o l . 1 , F S N : 4 9 1 0 - 2 0 4 - 2 6 4 4 ; C o l . 2 ,

D e s c r i p t i o n : Inflator Gauge, Pneumatic; Col. 2, Reference No. and MFR Code:

( 8 1 3 4 8 ) G G G 9 1 ; C o l . 1 1 , F i g . N o . : 3 . 1 ; C o l . 1 1 , I t e m N o . : 1 .

Page 29, Index No.

0 0 0 8 3 i s c h a n g e d t o r e a d : C o l . 2 , F S N : 4 7 2 0 - 8 7 4 - 3 1 4 9 ; C o l . 1 1 ,

F i g . N o . : 3 . 1 ; C o l . 1 1 , I t e m N o . : 4 .

P a g e 4 9 , a f t e r l a s t e n t r y a t b o t t o m o f p a g e , a d d : C o l . 1 , S M R C o d e P O ; C o l . 2 , F S N :

4 7 3 0 - 0 0 - 2 4 9 - 2 0 2 9 ; C o l . 3 , D e s c r i p t i o n : T e e ; C o l . 3 , R e f e r e n c e N o . : ( 8 2 6 6 6 ) ; C o l .

3 , M F R C o d e : 631+; C o l . 1 1 , F i g . N o . : 3 . 1 ; C o l . 1 1 , I t e m N o . : 1 4 .

P a g e 4 9 , a f t e r l a s t e n t r y a t b o t t o m o f p a g e , a d d : C o l . 1 , S M R C o d e : P O ; C o l . 2 ,

FSN: 4 7 3 0 - 0 0 - 1 9 6 - 1 4 6 5 ; C o l . 3 , D e s c r i p t i o n : N i p p l e ; C o l . 3 , R e f e r e n c e N o . :

( 9 6 9 0 6 ) ; C o l . 3 , M F R C o d e : M S 5 1 8 7 3 - 2 5 ; C o l . 1 1 , F i g . N o . : 3 1 ; C o l . 1 1 , I t e m N o . :

15.

1

TM 5-4310-277-25P

C 4

By Order of the Secretary of the Army:

JOHN A. WICKHAM, JR.

General, United States Army

Chief of Staff

Official:

R. L. DILWORTH

Brigadier General, United States Army

The Adjutant General

DISTRIBUTION:

T o b e d i s t r i b u t e d i n a c c o r d a n c e w i t h D A F o r m 1 2 - 2 5 A , O r g a n i z a t i o n a l , D i r e c t a n d

G e n e r a l S u p p o r t M a i n t e n a n c e r e q u i r e m e n t s f o r A i r C o n d i t i o n e r , V e r t i c a l C o m p a c t ,

18,000 BTU, 208V, 400 HZ, 3PH (F18T4-2S).

2

C H A N G E

NO.3

Changes in force, C1, C2, and C3

TM 5-4310-277-25P

C3

HEADQUARTERS


WASHINGTON, DC, 4 November 1977

Organizational, Direct and General Support, and Depot Maintenance Repair Parts and Special Tools List

COMPRESSOR, RECIPROCATING, AIR, 15CFM,

175PSI, TANK MOUNTED, GED, (CHAMPION PNEUMATIC MODEL HGR5-8M-1)

NSN 4310-00-880-0186 AND (CHAMPION PNEUMATIC MODEL HGR5-8M-6)

NSN 4310-00-880-0186

COMPRESSOR, RECIPROCATING, AIR, 15CFM,

175PSI, TRILER MOUNTED, GED, (CHAMPION PNEUMATIC MODEL BGR-5M-1)

NSN 4310-00-852-1745

Current as of 31 August 1977

TM 5-4310-277-25P, 18 November 1968, is changed as follows:

Title is changed as shown above.

All changes, additions, or deletions of Federal and National Stock Numbers or Manufacturer’s

Parts Numbers should be appropriately reflected in the parts listing and index of the manual.

Page u, paragraph 4a, Code C is added as

follows:

C Model HGR5-8M-6 only

SECTION III and V change, add, or delete as shown on the following pages.

1

5306-225-8499

4310-631-3398

5330-252-6639

5330-584-9011

4310-625-6759

5305-952-0760

4310-625-6757

4310-631-3399

4310-625-6762

5305-952-0760

4310-625-6760

5310-176-8097

5330-584-9010

4310-654-3590

5306-225-8499

4

4

4310-631-3398

5330-252-6639

5330-584-9011

4310-625-6759

5305-952-0760

4310-625-6757

4310-631-3399

4310-625-6762

5305-952-0760

4310-625-6760

5310-176-8097

5330-584-9010

GASKET

(11568) RE10-66

4310-654-3590

C3, TM 5-4310-277-25P

11

Following page 59, Figure 9.1 is added.

Figure No. 9.1. Check Valve (Model HGR-8M-6).

13

TM 5-4310-277-25P

C3

By Order of the Secretary of the Army

BERNARD W. ROGERS



Official

J. C. PENNINGTON

Brigadier General, United States Army


Distribution:

To be distributed in accordance with DA Form 12 25A, Organizational maintenance requirement for Air

Compressors, 15 CFM.

Changes in force: C 1 and C 2

T M 5 - 4 3 1 0 - 2 7 7 - 2 5 P

C 2

CHANGE

No. 2

HEADQUARTERS


WASHINGTON, D.C., 19 June 1973

O r g a n i z a t i o n a l , D i r e c t a n d G e n e r a l S u p p o r t a n d D e p o t M a i n t e n a n c e R e p a i r P a r t s and Special Tool List

C O M P R E S S O R , R E C I P R O C A T I N G , A I R , 1 5 C F M

1 7 5 P S I , T A N K M O U N T E D , G E D

( C H A M P I O N P N E U M A T I C M O D E L H G R 5 - 8 M - 1 )

F S N 4 3 1 0 - 8 8 0 - 0 1 8 6

C O M P R E S S O R , R E C I P R O C A T I N G , A I R , 1 5 C F M

1 7 5 P S I , T R A I L E R M O U N T E D , G E D

( C H A M P I O N P N E U M A T I C M O D E L B G R - 5 M - 1 )

F S N 4 3 1 0 - 8 5 2 - 1 7 4 5


Page v. Paragraph 4a is changed to:

Code

A

AA

B a. Identification of the usable on codes are: through 10400

Model HGR5-8M-1 serial numbers 13655 through 13745

Model BGR-5M-1

Used On

Model HGR5-8M-1 serial numbers 10160

Uncoded items u/o all models.

Page 2, Group 0306. In line 00023, col. (3),

add usable on code AB.



Page 2, Group 0306. Add line 00024A as

follows: Col. (1): X20; Col. (3) (same indent as NUT, P/N M773) FITTING, COMPRES-

SION: 1 4 in. tube, 18 in NPT (11568) 2508

(usable on code) AA; Col. (4) EA; Col. (6): 2:

Col. (8) (a): 2; Col. (8) (b): 5.



Page 2, Group 0306. Add line 00027A, as

follows: Col. (1): X20; Col. (3): (same indent as Tank P/N 2540) TANK, FUEL (11568)

M1309 (usable on code) AA; Col. (4) Ea; Col.

(6): 1; Col. (8) (a): 2; Col. (8) (b): 4.

add

Page 3, Group 0306. In line 00028, Col. (3),

usable on code AB.

Page 3, Group 0306. Add line 00028A, Col.

(1): X20; Col. (3): (same indent as CAP, P/N

CD297) CAP, FUEL TANK (11568) M1163

(usable on code) AA; Col. (4): Ea; Col. (6):

1; Col, 8 (a): 2; Col. 8 (b): 2.

Page 3, Group 0306. Add line 00028B, Col.

(1) : X20; Col (3): (same indent as CAP, P/N

M1163) GASKET, CAP (11568) M1164 (usable on code) AA; Col. (4): Ea; Col. (6): 1, Col. (8)

(a) : 2; Col. (8) (b): 2A.

Page 3, Group 0306, In line 00029, Col. (3),



follows: Col. (1) : X20; Col. (3) : (same indent as FLANGE P/N ND1252) STRAINER, TANK

(11568) M1309 (usable on code) AA; Col. (4):

EA; Col. (6): 1: Col. (8) (a): 2; Col. (8) (b): 3.

Page 7, Group 2210. Add line 00094A. col.

(1) : X20; Col. (3): (same indent as plate P/N

M 8 5 2 ) P L A T E , I D E N T I F I C A T I O N ( 1 1 5 6 8 )

M1681 (usable on code) AA; Col. (4): EA; Col.

(6): 1.

Page 8, Group 5000. In line 00109, col.

(3), add usable on code AB.

Page 8, Group 5000. Add line 00109A. Col.

(1) : 0; Col. (3): (same indent as SCREW, FSN

5305-269-3213) SCREW, CAP, HEXAGON

HEAD: Compressor mtg., 3/8-16 thd size, 1 1/2 in. lg. (11568) M1460 (usable on code) AA; Col.

(4) : EA; Col. (6): 4; Col. (8) (a): 7; Col. (8)

(b): 55.

Page 9, Group 5001: In line 00121, col.



follows: Col. (1) : 0; Col. (3): (same indent as

SCREW, FSN 5305-710-4192) SCREW, CAP,

H E X A G O N H E A D : C y l i n d e r H e a d m t g . ,

7 16-20 thd size, 1 1/4 in. lg. (11568) M817

(usable on code) AA; Col. (4): EA; Col. (6): 6;

Col. (8) (a): 6; Col. (8) (b): 25.





Page 12, Group 5007. In line 00192, add

usable on code AB.


follows: Col. (1) 0; Col. (3): (same indent as

BOLT, P/N RE4-105) SCREW, CAP, HEXA-

GON HEAD: Flywheel mtg., 1/2-13 thd size,

4 in. lg. (11568) M738 (usable on code) AA;

Col. (4): EA; Col. (6): 1; Col. (8) (a): 7; Col.

(8) (b) :14.


usable on code AB.


follows: Col. (1): X20; Col. (3): (same indent as NUT, P/N M151) NUT, HEXAGON, 1 4-28 thd size (11568) M926A (usable on code) AA;


(8) (b): 6.

Page 14, Group 5008. Add line 00214B as

follows: Col. (1) : X20; Col. (3): (same indent as NUT, P/N M926A) WASHER, LOCK: 1/4 in., external teeth (11568) M919A (usable on code) AA; Col. (4): EA; Col. (6): 2; Col, (8)

(a): 10; Col. (8) (b): 6A.



Page 16, Group 5009. In line 00240, col. 3,


add

Page 16, Group 5009.

usable on code AB.

In line 00241, col, 3, add


usable on code AB.

In line 00249, col. 3, add


usable on code AB.



usable on code AB.


Page 17, Group 5009,

usable on code AB.



usable on code AB.

In line 00272, col, 3, add


usable on code AB.



usable on code AB.



usable on code AB.



usable on code AB.



usable on code AB.



usable on code AB.



usable on code AB.

In line 00284, coI. 3, add


usable on code AB.



usable on code AB.

In line 00286, col. 3,

Col

Page 17, Group 5009. Add line 00286A:

(1): X20; Col. (3): (same indent as

SLEEVE, P/N M546) FITTING, COMPRES-

SION (11568) Z499 (usable on code) AA; Col.

(4): EA; Col. (6): 2;



Page 18, Group 5009. Add line 00288A,

Col. (1): X20; Col. (3): (same indent as NUT,

P/N M545) FITTING, COMPRESSION (11568)

Z499 (usable on code) AA; Col. (4): EA; Col.

(6): 2; Col. (8) (a): 6; Col. (8) (b); 31.






follows: Col. (1) : X20; Col, (3) : (same indent as NUT, FSN 4730-142-1593) FITTING, COM-

PRESSION (11568) Z499 (usable on code) AA;

Col. (4): EA; Col. (6); 1; Col. (8) (a): 6; Col.

(8) (b): 2.


follows: Col. (1): X20; Col. (3) ; (same indent as VALVE, P/N Z544) VALVE ASSEMBLY,

CHECK (11568) Z57A (usable on code) AA;

Col. (4): EA; Col. (6): 1; Col, (8) (a): 6; Col.

(8) (b): 40.


follows: Col. (1) : X20; Col, (3) : (move to first indent under VALVE ASSY. P/N Z57A) CAP

(11568) M146 (usable on code) AA; Col,

(4): EA; Col, (6): 1; Col. (8) (a): 9A; Col.

(8) (b): 1.

Page 19, Group 5009. Add line 00302C as

follows: Col. (1) : X20; Col. (3) : (same indent as CAP, P/N M146) PLUG, SPRING GUIDE

(11568) M1103 (usable on code) AA: Col. (4):

EA; Col. (6): 1; Col. (8) (a): 9A; Col. (8)

(b): 2.

Page 19, Group 5009. Add line 00302D as

follows: Col. (1): X20; Col. (3): (same indent a s P L U G , P / N M 1 1 0 3 ) S P R I N G , V A L V E

(11568) M453A (usable on code) AA; Col. (4):

EA; Col. (6): 1; Col. (8) (a): 9A; Col. (8)

(b): 3.

Page 19, Group 5009. Add line 00302E as

follows: Col. (1) : X20; Col. (3) : (same indent a s S P R I N G , P / N M 4 5 3 A ) D I S C , V A L V E


EA; Col. (6): 1; Col. (8) (a): 9A; Col. (8)

(b): 4.

Page 19, Group 5009. Add line 00302F as

follows: Col. (1) : X20; Col. (3): (same indent as DISC, P/N M1102) SEAT, VALVE (11568)

M1100 (usable on code) AA; Col, (4): EA; Col.

(6) : 1; Col. (8) (a): 9A; Col. (8) (b): 5.

Page 19, Group 5009. Add line 00302G

as follows: Col. (1): X20; Col. (3) : (same indent as SEAT P/N M1100) GUIDE, VALVE


EA; Col. (6): 1; Col. (8) (a): 9A; Col. (8)

(b): 6.

Page 19, Group 5009. Add line 00302H as

follows: Col. (1): X1; Col. (3) (same indent as

GUIDE, P/N M1109) BODY, VALVE (11568)


(6): 1; Col. (8) (a): 9A; Col. (8) (6): 7.

Page 19, Group 5009. Add line 003021 as

follows: Col. (1) : X20; Col. (3): (same indent as line 00302A) NIPPLE, CLOSE, 3 4 NPT

(11568) M1034B (usable on code) AA; Col. (4) :

EA; Col. (6): 1.

Page 19, Group 5009. Add line 302J as

follows: Col. (1): X20; Col. (3): (same indent as NIPPLE, P/N M1034B) ELBOW, STREET,

3 4 in. 90° (11568) M1296 (usable on code)

AA; Col. (4): EA; Col, (6): 1.

Page 21, Group 5010. In line 00335, Col.



follows: Col. (1): X20; Col. (3): (same indent as NUT, P/N M151) NUT, HEXAGON, 1/4-28 thd size (11568) M926A (usable on code) AA;

Col. (4): EA: Col. (6): 2; Col. (8) (a): 10; Col.

(8) (b): 6.


follows: Col. (1) : X20; Col. (3): (same indent as NUT, P/N M926A) WASHER, LOCK, 1/4 in., external teeth (11568) M919A (usable on code) AA; Col. (4): EA; Col. (6): 2; Col. (8)

(a) : 10; Col. (8) (b): 6A.




follows: Col. (1): X20; Col. (3): (same indent as TUBE, P/N C1286) TUBE, AFTERCOOLER


EA; Col. (6): 1; Col. (8) (a): 6; Col. (8) (b): 41.

(3).



(3),




follows: Col. (1): X20; Col. (3): (same indent as NUT, P/N M773) FITTING, COMPRES-

SION: 1/4 in. tube, 1/8 in. NPT (Used in place of BODY, P/N M774; and NUT, P/N M773 as coded) (usable on code) AA; Col. (4): EA; Col.

(6): 2; Col. (11) (a): 2; Col. (11) (b): 5.




follows: Col. (1): X20; Col. (3): (same indent

as TANK, P/N Z540) TANK, FUEL (11568)


(6): 1; Col. (11) (a): 2; Col. (11) (b): 4.




follows: Col. (1): X20; Col. (3) : (same indent a s C A P , P / N C D 2 9 7 ) C A P , F U E L T A N K

(11568) M1163 (usable on code) AA: Col. (4):

EA; Col. (6): 1; Col. (11) (a): 2; Col. (11)

(b): 2.


follows: Col. (1): X20; Col. (3): (same indent as CAP P/N M1163) GASKET. CAP (11568)


(6): 1; Col. (11) (a): 2; Col. (11) (b): 2A.



Page 26, Group 0306. Acid line 00029A as

follows: Col. (1) : X20; Col. (3) : (same indent as FLANGE, P/N ND1252) STRAINER, TANK


EA; Col. (6): 1; Col. (11) (a): 2; Col. (11)

(b): 3.


follows: Col, (1) : X20; Col. (3): (same indent as PLATE, P/N M852) PLATE, IDENTIFICA-

TION (11568) M1681 (usable on code) AA; col. (4) : EA; Col. (6): 1.

Page 31. Group 5000. In line 00109, col.



follows: Col. (1): 0; Col. (3): (same indent as

SCREW. FSN 5305-269-3213) SCREW, CAP,

HEXAGON HEAD: Compressor mtg, 3/8-16 thd size, 1 1/2 in. lg. (11568) M1460 (usable on code) AA; Col. (4): EA; Col. (6): 4; Col. (11)

(a): 7: Col. (11) (b): 55.



Page 32. Group 5001. Add line 00121A as

follows: Col. (1): 0; Col. (3): (same indent as

SCREW, FSN 5305-710-4192) SCREW, CAP,

H E X A G O N H E A D : C y l i n d e r H e a d M t g . ,

7/16-20 Thd Size, 1 1/4 in. lg. (11568) M817

(usable on code) AA; Col. (4); EA; Col. (6):

6; Col. (11) (a): 6; Col. (11) (b): 25.






usable on code AB.


follows: Col. (1) : 0; Col. (3) : (same indent as

BOLT, P/N RE4-105) SCREW, CAP, HEXA-

GON HEAD: Flywheel Mtg., 1/-13 thd size, 4 in. lg. (11568) C738 (usable on code) AA; Col.

(4): EA; Col. (6): 1; Col. (11) (a): 7; Col. (11)

(b): 14.


usable on code AB.


follows: Col. (1) : X20; Col. (3) : (same indent as NUT, P/N M151) NUT, HEXAGON, 1/4-28 thd size (11568) M926A (usable on code) AA;

Col. (4): EA; Col. (6): 2; Col. (11) (a): 10;

Col. (11) (b): 6.


follows: Col. (1): X20; Col. (3) : (same indent as NUT, P/N. M926A) WASHER, LOCK: 1 4 in., external teeth (11568) M919A (usable on code) AA; Col. (4): EA; Col. (6): 2; Col. (11)

(a) : 10; Col. (11) (b): 6A.

(3),



(3),



(3),



(3),



(3),



(3),



(3),



(3),



(3),



(3),



(3),

Page 42, Group 5009, In line 00275, Col.


(3),



(3),



(3),



(3),



(4),



(3),



(3),

Page 43, Group 5009. In line 00286, CO].


Col.


(1): X20; Col. (3): (same indent as

SLEEVE, P/N M546) FITTING, COMPRES-

SION (11568) Z499 (usable on code) AA; Col.

(4): EA; Col. (6): 2.




Col. (1): X20; Col. (3): (same indent as NUT,

P/N M545) FITTING, COMPRESSION (11568)

Z499 (usable on code) AA; Col. (4): EA; Col.

(6) 2; (11) (a): 6; Col. (11) (b): 31.

(3),



(3).




follows: Col. (1): X20; Col. (3): (same indent as NUT, FSN 4730-142-1593) FITTING, COM-

PRESSION (11568) Z499 (usable on code) AA;

Col. (4): EA: COl. (6): 1; Col. (11) (a): 6; Col.

(11) (b): 2


follows: Col. (1) : X20; Col. (3) (same indent as VALVE, P/N Z544) VALVE ASSEMBLY,

CHECK (11568) Z57A (usable on code) AA:


(11) (b): 40.


follows: Col. (1) : X20; Col. (3): (Move to first indent under VALVE ASSY., P/N Z57A) CAP


EA; COl. (6): 1; Col. (11) (a): 9A; Col. (11)

(b): 1.

Page 44, Group 5009. Add line 00302C as

follows: Col. (1): X20; Col. (3): (same indent as CAP, P/N M146) PLUG, SPRING GUIDE


EA; Col. (6): 1; Col. (11) (a): 9A; Col. (11)

(b): 2.

Page 44, Group 5000. Add line 00302D as

follows: Col. (1): X20; Col. (3): (same indent a s P L U G , P / N M 1 1 0 3 ) S P R I N G , V A L V E

(11568) M453A (usable on code) AA; Col. (4):

EA; Col. (6): 1; Col. (11) (a): 9A; Col. (11)

(b): 3.

Page 44, Group 5009. Add line 00302E as

follows: Col. (1): X20; Col. (3): (same indent a s S P R I N G . P / N M 4 5 3 A ) D I S C , V A L V E


EA; Col. (6): 1; Col. (11) (a): 9A; Col. (11)

(b): 4.

Page 44, Group 5009. Add line 00302F as

follows: Col. (1): X20; Col. (3): (same indent as DISC, P/N M1102) SEAT, VALVE (11568)

Ml 100 (usable on code) AA; Col. (4); EA; Col.

(6): 1; Col. (11) (a): 9A; Col. (11) (b): 5.

Page 44, Group 5009. Add line 00302G as

follows: Col. (1): X20; Col. (3) : (same indent as SEAT, P/N M1100) GUIDE, VALVE (11568)

Ml 109 (usable on code) AA; Col. (4): EA; Col.

(6): 1; Col. (11) (a): 9A; Col. (11) (b): 6.

Page 44, Group 5009. Add line 00302H as

follows: Col. (1): X20; Col. (3): (same indent as GUIDE, P/N M1109) BODY, VALVE


EA; Col. (6): 1; Col. (11) (a): 9A; COl. (11)

(b): 7.

Page 44, Group 5009. Add line 003021 as

follows: Col. (1): X20; Col. (3): (same indent as line 00302A) NIPPLE, CLOSE, 3/4 NPT

(11568) M1034B (usable on code) AA; Col.

(4): EA; Col. (6): 1.

Page 44, Group 5009. Add line 00302J as

follows: Col. (1) : X20; Col. (3): (same indent as NIPPLE, P/N M1034M) ELBOW, STREET,

3 4 in. 90' (11568) M1296 (usable on code) AA;

Col. (4): EA; Col. (6): 1.




follows: Col. (1) : X20; Col. (3): (same indent as NUT, P/N M151) NUT, HEXAGON, 1/4-28

thd size (11568) M926A (usable on code) AA;

Col. (4): EA; Col. (6): 2; Col. (11) (a): 10;

Col. (11) (b): 6.


follows: Col. (1): X20; Col. (3): (same indent as NUT, P/N M926A) WASHER, LOCK, 1/4 in., external teeth (11568) M919A (usable on code) AA; Col. (4): EA; Col. (6): 2; Col. (11)

(a): 10; Col. (11) (b): 6A.



Page 47, Group. 5010. Add line 00345A as

follows: Col. (1): X20; Col. (3): (same indent as TUBE, P/N C1286) TUBE, AFTERCOOLER


EA; Col. (6): 1; Col. (11) (a): 6; Col. (11)

(b): 41.

Page 51. Figure 2 is superseded.

Figure No. 2. Fuel Tank and Related Parts.

Page 59A and Figure 9A are added.

Figure No. 9A. Check Valve.

Page 60. Figure 10 is superseded.

Figure No. 10. Unloader Head, High and Low Preasure.

Reflect all changes, additions and deletions of

Federal Stock Numbers, manufacturers’ codes and part numbers in the index.


CREIGHTON W. ABRAMS



Official:

VERNE L. BOWERS

Major General, United States Army


Distribution:

To be distributed in accodance with DA Form 12-25A (qty rqr block No. 18) Organizational Maintenance requirements for Compressor, Air, 15 CFM.

CHANGE

NO. 1

TM 5-4310-277-25P

C 1

HEADQUARTERS


Washington, D.C., 21 May 1970

Organizational, Direct and General Support, and Depot Maintenance

Repair Parts and Special Tools List

COMPRESSOR, RECIPROCATING, AIR, 15 CFM, 175 PSI,

TANK MOUNTED, GED {CHAMPION PNEUMATIC MODEL HGR5-8M-1)

FSN 4310-880-0186

COMPRESSOR, RECIPROCATING, AIR, 15 CFM, 175 PSI,

TRAILER MOUNTED, GED, (CHAMPION PNEUMATIC MODEL BCR-5M-1)

FSN 4310-852-1745


Page v, paragraph 4a. Change Code A, Model HGR-8M-1 to Code A, Model HGR5-8M-1.

Change Code B, Model HGR-5M-1 to Code B, Model BGR-5M-1.

Paragraph 4b, line 2. Change 100 hours to read 1000 hours.

Paragraph 4d. Change TM 5-4130-277-15 to TM 5-4310-277-15.

Change TM 5-3805-203-24P to TM 5-2805-203-24P.

Page vi. Paragraph 8 is superseded as follows:

8. Reporting of Equipment Publication Improvements

The reporting of errors, omissions, and recommendations for improving this publication by the individual user is encouraged. Reports should be submitted on DA Form 2028 (Recommended Changes to DA Publications) and forwarded direct to Commanding General, U.S. Army Mobility Equipment Command,

ATTN: AMSME-MPP, 4300 Goodfellow Boulevard, St. Louis, Mo., 53120.


Official:

KENNETH G. WICKHAM,

Major General, United States Army,

The Adjutant General.

W. C. WESTMORELAND,

General, United States Army,

Chief of Staff.

Distribution:

To be distributed in accordance with DA Form 12-25, Section I, (qty rqr block no. 18) organizational maintenance requirements

for Air Compresssors, 15 CGM.

TECHNICAL MANUAL

No. 5-4310–277–25P

TM 5-4310-277–25P

H E A D Q U A R T E R S


WASHINGTON, D.C. 18 November 1968

ORGANIZATIONAL, DIRECT AND GENERAL SUPPORT,

AND DEPOT MAINTENANCE REPAIR PARTS

AND SPECIAL TOOLS LIST

C O M P R E S S O R , R E C I P R O C A T I N G , A I R , 1 5 C F M , 1 7 5 P S I ,

T A N K M O U N T E D , G E D . ( C H A M P I O N P N E U M A T I C M O D E L

H G R 5 - 8 M - 1 ) F S N 4 3 1 0 - 8 8 0 - 0 1 8 6 C O M P R E S S O R ,

R E C I P R O C A T I N G , A I R 1 5 C F M , 1 7 5 P S I ,

T R A I L E R M O U N T E D , G E D . ( C H A M P I O N P N E U M A T I C M O D E L

B G R - 5 M - 1 ) F S N 4 3 1 0 - 8 5 2 - 1 7 4 5

Current as of 14 September 1968

Paragraph

SECTION I. INTRODUCTION

Scope - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1

G e n e r a l - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2

Explanation of columns -------------------------------------------------- 3

Special information -------------------------------------------------------------------------4

How to locate repair parts ------------------------------------------------ 5

Abbreviations ------------------------------------------------------------------6

Federal Supply Codes for Manufacturers ---------------------------------------------- 7

Report of Equipment Publication Improvements ---------------------------- 8

II. PRESCRIBED LOAD ALLOWANCE -------------------------------------------------------

III. REPAIR PARTS FOR ORGANIZATIONAL MAINTENANCE

Group

01. Engine

0100 Engine assembly ----------------------------------------------------------------

0102 Crankshaft ----------------------------------------------------------------------

0107 Engine starting system ---------------------------------------------------------

03. Fuel System

0306 Tanks, lines, fittings ------------------------------------------------------------

0309 Fuel filters ---------------------------------------------------------------------

0312 Accelerator, choke controls -------------------------------------------------------

04. Exhaust System

0401 Muffler and pipes ---------------------------------------------------------------

06. Electrical System

0615 Radio interference suppression----------------------------------------------------

15. Frame

1501 Frame assembly ---------------------------------------------------------------

18. Body, Cab, Hood and Hull

1808 Tool box -----------------------------------------------------------------------

22. Body, Chassis or Hull and Accessory Items

2201 Canvas, rubber or plastic items ---------------------------------------------------

2202 Accessory items ----------------------------------------------------------------

2210 Data plates ---------------------------------------------------------------------

47. Gages

4702 Gages

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - -

Page

3

4

4

5

8

1

1

2

5

6

7

2

3

3

v

vi vi vi

iii iii iii

v

vii

i

TM 5-4310-277-25P

Group 50. Pneumatic Equipment

5000 Air compressor assembly ---------------------------------------------------------

5001 Crankcase, block, cylinder head ---------------------------------------------------

5002 Crankshaft

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

5005 Valves, camshaft and timing mechanism --------------------------------------------

5006 Lubrication system --------------------------------------------------------------

5007 Compressor drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

5008 Air intake ---------------------------------------------------------------------

5009 Unloader system components -----------------------------------------------------

5010 Compressor cooling -------------------------------------------------------------

5014 Air receiver --------------------------------------------------------------------

5015 Air discharge system -----------------------------------------------------------

SECTION IV. SPECLIAL. TOOLS, TEST, AND SUPPORT EQUIPMENT

FOR ORGANIZATIONAL MAINTENANCE—NOT APPLICABLE

V. REPAIR PARTS FOR DS, GS, AND DEPOT MAINTENANCE

Group

01. Engine

0100 Engine assembly ----------------------------------------------------------------

0 1 0 2 C r a n k s h a f t - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

0107 Engine starting system ---------------------------------------------------------

03. Fuel System

0306 Tanks, lines, fittings -------------------------------------------------------------

0309 Fuel filters ---------------------------------------------------------------------

0312 Accelerator, choke controls -------------------------------------------------------

04. Exhaust System

0401 Muffler and pipes ---------------------------------------------------------------

06. Electrical System

0615 Radio interference suppression ---------------------------------------------------

15. Frame

1501 Frame assembly ------------------------------------------------------------------

18. Body, Cab, Hood and Hull

1808 Tool box ------------------------------------------------------------------------

22. Body Chassis or Hull and Accessory Items

2201 Canvas, rubber or plastic items --------------------------------------------------

2202 Accessory, items -----------------------------------------------------------------

2210 Data plates ---------------------------------------------------------------------

47. Gages

4702 Gages

-----------------------------------------------------------------------------

50. Pneumatic Equipment

5000 Air compressor assembly ---------------------------------------------------------

5001 Crankcase, block, cylinder head ---------------------------------------------------

5002 Crankshaft --------------------------------------------------------------------

5004 Pistons, connecting rods ----------------------------------------------------------

5005 Valves, camshaft and timing mechanism -------------------------------------------

5006 Lubrication system ---------------------------------------------------------------

5007 Compressor drive ---------------------------------------------------------------

5008 Air intake -----------------------------------------------------------------------

5009 Unloader system components -----------------------------------------------------

5010 Compressor cooling --------------------------------------------------------------

5014 Air receiver ---------------------------------------------------------------------

5015 Air discharge system ----------------------------------------------------------

SECTION VI. SPECIAL TOOLS, TEST AND SUPPORT EQUIPMENT FOR DS,

GS, AND DEPOT MAINTENANCE—NOT APPLICABLE

VII. FEDERAL STOCK NUMBER AND REFERENCE NUMBER INDEX -------------------

Page

24

24

25

25

26

26

26

27

27

28

28

29

30

31

62

8

12

14

15

20

9

12

8

9

21

22

36

37

38

39

46

47

48

31

31

32

32

33

TM 5-4310-277-25P

SECTION I

INTRODUCTION

1. Scope

This manual lists repair parts and special tools required for the performance of organizational, direct support, general support, and depot maintenance of the compressor.

2. General

a. The repair parts list is arranged as follows:

(1) Individual parts and major assemblies are listed alphabetically by item name within the numbered functional groups.

(2) Assembly components and subassemblies are indented and listed alphabetically by item name under major assemblies.

b. This Repair Parts and Special Tools List is divided into the followng sections:

(1) Prescribed Load Allowaance (PLA)-

Section II. A consolidated listing of repair

parts (quantitatively allocated for initial stockage at the organizational level. This is a mandatory minimum stockage allowance.

(2) Repair Parts-Section III. A list of

repair parts authorized for the performance of maintenance at the organizational level.

(3) Specal Tools, T e s t a n d S u p p o r t

Equipment–Section IV. Not Applicable.

(4) Repair Parts-Section V. A list of

repair parts authorized for the performance of maintenance at the direct support, general support, and depot level.

(5) Special Tools,

T e s t a n d S u p p o r t

Equipment—Section VI. Not Applicable.

(6) Federal Stock Number and Reference

Number Index-Section VII. A list of Federal

stock numbers followed by reference numbers, appearing in all the listings, in ascending alphanumeric sequence cross-referenced to index number.

3. Explanation of Columns

The following provides an explanation of col-

umns in the tabular lists in sections II through

V I .

a. Source, Mainteenance, and Recoverability

Codes (SMR).

Note. Common hardware items known to be readily available in Army supply channels will be assigned

Maintenance codes only. Source codes, Recoverability codes, and Maintenance Allowance will not be assigned to this category.

(1) Source Code. Indicates the selection status and source for the listed item. Source codes used are:

P

M

A

X

X1

X2

Explanation

Applied to repair parts which are stocked in or supplied from DSA/GSA or Army supply system, and authorized for use at indicated categories.

Applied to repair parts which are not procured or stocked but are to be manufactured at indicated maintenance categories.

Applied to assemblies which are not procured or stocked as such but made up of two or more units, each of which carry individual stock numbers and descriptions and are procured and stocked and can be assembled by units at indicated maintenance categories.

Applied to parts and assemblies which are not procured or strocked, the mortality of which is normally below that of the applicable end item, and the failure of which should result in retirement of the end item from the supply system.

Applied to repair parts which are not procured or stocked, the requirement for which will be supplied by use of the next higher assembly or components.

Applied to repair parts which are not stocked. The indicated maintenance category requiring such repair parts will attempt to obtain them through cannibalization; if not obtainable through cannibalization, such repair parts will be requisitioned with supporting justification through normal supply channels.

iii

TM 5-4310-277-25P

Code

C

G

Code

O

F

H

D

Explanation

Applied to repair parts authorized for local procurements. If not obtainable from local procurement, such repair parts will be requisitioned through normal supply channels with a suporting statement of nonavailability from local procurement.

Applied to major assemblies that are procured with PEMA (Procurement Equipment Missile Army) funds for initial issue only to be used as exchange assemblies at DSU and CSU maintenance Ievel.

These assemblies will not he stocked above

DSU and GSU level or returned to depot supply level.

(2) Maintenance Code. Indicates the lowest category of maintenance authorized to install the listed item. The maintenance level codes are:

Explanation

Organizational maintenance

Direct support maintenance

General support maintenance

Depot maintenance

(3) Recorerbility Code. Indicates whether unserviceable items should be returned for recovery or salvage. Items not coded are expendable. Recoverability codes are:

Code

R

T

U

Explanation

Applied to repair parts and assemblies which are economically repairable at DSU and GSU activities and normally are furnished by supply on an exchange basis.

Applied to high dollar value recoverable repair parts which are subject to special handling and are issued on an exchange basis. Such repair parts normally are repaired or overhauled at depot maintenance activities.

Applied to repair parts specifically selected for salvage by reclamation units because of precious metal content, critical materials, high dollar value reusable casings or castings.

(4) This column also lists, below the

SMR code, an index number for each item in ascending numerical sequence, which is used to locate items in the publication when the

Federal stock number and/or reference number is known.

b. Federal Stock Number. Indicates the

Federal stock number for the item.

iv

c. Description. Indicates the Federal item name and any additional description of the item required. The applicable five-digit Federal Supply Code for manufacturers, in parentheses, is followed by a part number or other reference number.

d. Unit of Issue. Indicates the unit used as a basis for issue, e.g., ea, pr, ft, yd, etc.

e. Quantity lncorporated in Unit Pack. Indicates the actual quantity contained in the unit pack.

f. Quantity Incorporated in Unit. Indicates the quantity of the item used in the functional group.

g. Fifteen-Day Organizational Maintenance

Allowances.

(1) The allowance columns are divided into four subcolumns. Indicated in each subcolumn opposite the first appearance of each item is the total quantity of items authorized for the number of equipments supported. Subsequent appearances of the same item will have no entry in the allowance columns but will have in the description column a reference to the first appearance of the item. Items authorized for use as required but not for initial stockage are identified with an asterisk in the allowance column.

(2) The quantitative allowances for organizational Ievel of maintenance represents one initial prescribed load for a 15-day period for the number of equipments supported. Units and organizations authorized additional prescribed loads will multiply the number of prescribed loads authorized by the quantity of repair parts reflected in the appropriate density column to obtain the total quantity of repair parts authorized.

(3) organizational units providing maintenance for more than 100 of these equipments shall determine the total quantity of parts required by the equipment quantity to a decimal factor by placing a decimal point before the next to last digit of the number to indicate hundredths, and multiplying the decimal factor by the parts quanity authorized in the

51–100 allowance column. Example, authorized allowance for 51–100 equipments is 12; for

140 equipments multiply 12 by 1.40 or 16.80

rounded off to 17 parts required.

(4) Subsequent changes to allowances will be limited as follows: No change in the range of items is authorized. If additional items are considered necessary, recommendation should be forwarded to U. S. Army Mobility Equipment Command for exception or revision to the allowance list. Revisions to the range of items authorized will be made by this

Command based upon engineering experience, demand data, or TAERS information.

h. Thirty-Day DS/GS Maintenance Allowances.

(1) The allowance columns are divided into three subcolumns, Indicated in each subcolumn, opposite the first appearance of each item, is the total quantity of items authorized for the number of equipments supported. Subsequent appearances of the same item will have no entry in the allowance column, but will have in the description column a reference to the first appearance of the item. Items authorized for use as required but not for initial stock age are identified with an asterisk in the allowance column.

(2) The quantitative allowances for DS/

CS Ievels of maintenance will represent initial stockage for a 30-day period for the number of equipments supported.

(3) Determination of the total quantity of parts required for maintenance of more than 100 of these equipments can be accomblished by converting the equipment quantity to a decimal factor by placing a decimal point before the next to last digit of the number to indicate hundredths, and multiplying the decimal factor by the parts quantity authorized in the 51–100 allowance column. Example, authorized allowance for 51–100 equipments is

40; for 150 equipments multiply 40 by 1.50 or

60 parts required.

i. One-Year Allowance Per 100 Equipment/

Contingency Planning Purposes. Indicates opposite the first appearance of each item the total quantity required for distribution and contingency planning purposes. The range of items indicates total quantities of all authorized items required to provide for adequate support of 100 equipments for one year.

j. Depot Maintenance Allowance Per 100

Equipments. Indicates opposite the first ap-

TM 5-4310-277-25P

pearance of each item the total quantity authorized for depot maintenance of 100 equipments. Subsequent appearances of the same item will have no entry in this column, but will have in the description column a reference to the first appearance of the item. Items authorized for use but not for initial stockage are identified with an asterisk in the allowance column.

k. Illustration.

(1) Figure Number. Indicates the figure number of the illustration in which the item is shown,

(2) Item Number. Indicates the callout number used to reference the item in the illustration.

4. Special Information

a. Identification of the usable on codes of this publication are:

Code

A

B

Used on

Model HGR–8M–1, only

Model HGR–5M-1, only

Uncoded items u/o all models b. Repair parts mortality has been based on 100 hours of operation per year.

c. Parts which require manufacture or assembly at a category higher than that authorized for installation will indicate in the source column the higher category.

d. The following publications pertain to compressor and its components:

TM 5-4130-

277-15

TM 5-3805-

203-24P

TM 9-2330–

251-14P

Operator, Organizational, Direct support, General Support and Depot

Maintenance Manual

Organizational, DS and GS Maintenance

Repair Parts and

Special Tool Lists

Operator, Organizational, DS, GS,

Maintenance Instructions with Repair Parts and

Special Tool Lists

v

TM 5-4310-277-25P

5. How to Locate Repair Parts

a. When Federal Stock Number or reference number is unknown:

(1) First. Using the table of contents, determine the functional group or subgroup within which the repair part belongs. This will refer to a page in the parts listing.

(2) Second. The illustration column of the page refers to a figure number.

(3) Third. Locate the figure and identify the repair parts, noting the item number.

(4) Fourth. Refer back to the page of the parts listing. Find the item number in the illustration column that corresponds with the figure number.

b. When Federal Stock number or reference number is known:

(1) First. Using the Index of Federal

Stock Numbers and Reference Numbers, find the pertinent Federal stock number or reference number. This index is in ascending alphanumeric sequence cross-referenced to an index number,

(2) Second. Using the Repair Page Listing, find the index number referenced in the

Index of Federal Stock Numbers and Reference Numbers.

6. Abbreviations

deg ------------------------degree (s) id --------------inside ----- inside diameter in. ----------------------inch (s) lh -------------------------cleft hand lg -------------------------length mtg -----------------------mounting

No. ----------------------number

NPT ---------------------National Pipe Threads rh -------------------------bright hand thd ------------------------thread (s) thk --------------------------thick (ness) u/o -------------------------used on

7. Federal Supply Codes for Manufacturers

Code Manufacturer

11568 ----

24617 ----

25472 ----

53477 ----

60038 ----

70925 ----

72219 ----

73540 ----

75336 ----

78349 ----

79150 ----

79470 ----

80201 ----

81118 ----

81336 ----

86107 ----

88044 ----

92976 ----

94849 ----

96906 ----

Champion Pneumatic Machinery Co.

General Motors Corp.

Goodrich B.F. Co., The

Schraders A, and Son Div. of Scovill

Mfg. Co.

Timken Roller Bearing Co.

Bijur Lubricating Corp.

Consolidated Brass Co.

G and O Mfg. Co., The

Kingston, F.C. Co.

Smith Hinshman and Grylls Inc.

Victor Mfg. and Gasket Co.

Featherhead Co., The

Chicago Rawhide Mfg. Co.

Eaton Mfg. Co.

Chief of Engineers

Central Brass Mfg. Co.

Aeronautical Standards Group Dept of

Navy and Air Force

Kaddis A.G. Screw Products Inc.

Albright Co.

Military Standards

8. Report of Equipment Publication

Improvement

Report of errors, omissions, and recommendations for improving this manual by the individual user is encouraged. Reports should be submitted on a DA Form 2028 (Recommended

Changes to DA Publications) and forwarded direct to Commanding General, U.S, Army

Mobility Equipment Command, A T T N :

AMSME-MPP, 4300 Goodfellow Boulevard, St.

Louis, Mo. 63120.

vi

TM5-4310-277-25P

(1)

FEDERAL

STOCK

NUMBER

SECTION II

PRESCRIBED LOAD ALLOWANCE

(1)

DESCRIPTION

3030-854-7351

4310-065-0338

GROUP 50-PNEUMATIC EQUIPMENT

5007-COMPRESSOR DRIVE

BELT, V, MATCHED SET

(25472) 4L710-2

5008-AIR INTAKE

PACKING PREFORMED

(11568) OR111

2

1

(8)

QTY

INC 1N

PACK

(4)

15-DAY ORG. MAINT. ALW

(A)

1-6

(B)

5-20

(C) (D)

21-50 51-100

2

2

2

2

VII

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-

SMR FEDERAL QTY QTY 15-DAY ORGANIZATIONAL TRATION

CODE STOCK DESCRIPTION INC INC MAINTENANCE ALW (A) (B)

----- NUMBER UNIT UNIT

INDEX PACK (A) (B) (C) (D) FIG. ITEM

NO NO NO.

REFERENCE NO. & MFR. CODE USABLE ON CODE UNIT OF ISSUE 1-5 6-20 21-50 51-100

00001 SECTION III - REPAIR PARTS FOR ORGANIZATIONAL

MAINTENANCE

00002 GROUP 01 - ENGINE

00003 0100 - ENGINE ASSEMBLY

0 5306-225-8499 BOLT, MACHINE: ENGINE MTG, 5/16-18 THD SIZE, EA 4 1 6

00004 1 IN. LG

(96906) MS35295-34

P O T 2805-068-7512 ENGINE, GASOLINE EA 1 * * * * 1 1

00005 (81336) 4A032-11

X20 EXTENSION: ENGINE OIL DRAIN A EA 1

00006 (11568) M724

X1 2805-690-8866 PACKING, PREFORMED: ENGINE OIL DRAIN A EA 1

00007 (11568) OR11

O NUT, PLAIN, HEXAGON: ENGINE MTG, 5/16-18 THD SIZE EA 4 1 8

00008 (11568) M936A

O 5310-209-0110 WASHER, FLAT: ENGINE MTG, 5/16 IN. SCREW SIZE EA 4 1 9

00009

O 5310-514-6674 WASHER, LOCK: ENGINE MTG, 5/16 IN. SCREW SIZE EA 4 1 7

00010 (11568) M911A

00011 0102 - CRANKSHAFT

X20 2930-014-6993 BUSHING, SLEEVE: V PULLEY EA 1 5 16

00012 (11568) M721

X20 PULLEY, V: COMPRESSOR FLYWHEEL DRIVE EA 1 5 17

00013 (11568) M722

O 5305-225-3839 SCREW, CAP, HEXAGON HEAD: BUSHING MTG TO PULLEY, EA 2 5 14

00014 1/4-20 THD SIZE, 1 IN. LG

(96906) MS90725-8

1

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


O SCREW, CAP, HEXAGON HEAD: STUB SHAFT MTG, EA 4 5 20

00014A 5/16-24 THD SIZE, 1 IN. LG

(11568) M924A

X20 STUB SHAFT, EXTENSION EA 1 5 18

00015 (11568) M725

O 5310-012-1753 WASHER, LOCK: BUSHING MTG TO PULLEY, 1/4 IN. SCREW SIZE, EA 2 5 15

00016 EXTERNAL TOOTH

(96906) MS35335-19

O 5310-514-6674 WASHER, LOCK: STUB SHAFT MTG, 5/16 IN. SCREW SIZE, EA 4 5 19

00016A EXTERNAL TOOTH

00017 0107 - ENGINE STARTING SYSTEM

P O 2990-142-0080 STARTING ROPE, ENGINE EA 1 * * * *

0018 (96906) MS9786E

00019 GROUP 03 - FUEL SYSTEM

00020 0306 - TANKS, LINES, FITTINGS

X20 CLAMP: FUEL TANK MTG EA 2 2 1

00021 (11568) M841

X20 LINE, FUEL: TANK TO CARBURETOR EA 1 2 7

00022 (11568) M850

X20 BODY, FLARE: 1/4 X 1/8 IN. EA 2 2 5

00023 (11568) M774

X20 NUT, FLARE: 1/4 IN. EA 2 2 6

00024 (11568) M773

O 4730-187-4200 PLUG, PIPE: FUEL TANK DRAIN, 1/8 IN. NPT EA 1 2 10

00025

O 5310-543-5180 NUT, SELF-LOCKING, HEXAGON: FUEL TANK CLAMP EA 2 2 11

00026

X20 TANK ASSEMBLY, FUEL EA 1 2 4

00027 (11568) Z540

2

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X20 2910-496-4949 CAP, FUEL TANK EA 1 2 2

00028 (81118) CD297

X20 2910-678-9133 FLANGE, FILLER NECK EA 1 2 3

00029 (81118) ND1252

00030 0309 - FUEL FILTERS

X20 ELBOW, PIPE, STREET: FILTER MTG TO TANK, 1/8 IN. NPT EA 1 2 9

00031 (11568) M9798

P O 2910-905-9792 FILTER, FLUID PRESSURE: FUEL EA 1 * * * * 2 8

00032 (96906) MS51086-1

00033 0312 - ACCELERATOR, CHOCK CONTROLS

X20 ARM, THROTTLE EA 1 6 36

00034 (11568) M703

O SCREW, MACHINE: THROTTLE ARM MTG, NO. 8-32 THD SIZE, EA 1 6 35

00035 1/2 IN. LG

(11568) M1052A

O NUT, PLAIN, HEXAGON: THROTTLE ARM MTG, EA 1 6 34

00036 NO. 8-32 THD SIZE

(11568) M925A

O WASHER, LOCK: THROTTLE ARM MTG, NO. 8 SCREW SIZE, EA 1


(11568) M918A

00038 GROUP 04 - EXHAUST SYSTEM

00039 0401 - MUFFLER AND PIPES

X20 BRACKET: MUFFLER SUPPORT LH EA 1 1 10

00040 (11568) M758

X20 BRACKET: MUFFLER SUPPORT RH EA 1 1 2

00041 (11568) M761

3

(1) (2)

SMR

CODE

-----

INDEX

NO

FEDERAL

STOCK

NUMBER

X20

00042

2990-903-3864

O

00043

O

00044

5305-068-0502

O

00045

O

00046

5310-012-1753

00047

00048

O

00049

5310-584-5005

O

00050

5305-068-0502

X20

00051

O

00052

5310-012-1753

00053

00054

X20

00055

(3)

DESCRIPTION

REFERENCE NO. & MFR. CODE

MUFFLER, EXHAUST: ENGINE

(11568) Z282

NUT, PLAIN, HEXAGON: MUFFLER MTG, 1/4-28 THD SIZE, BRASS

(11568) M151

SCREW, CAP, HEXAGON HEAD: MUFFLER BRACKET MTG,

1/4-20 THD SIZE, 3/4 IN. LG

(96906) MS35297-6

STUD, PLAIN: MUFFLER MTG, 1/4-28 THD SIZE,

3/4 IN. LG

(11568) M759

WASHER, LOCK: MUFFLER BRACKET AND MUFFLER TO BRACKET

MTG, 1/4 IN. SCREW SIZE, EXTERNAL TOOTH

(96906) MS35335-19

GROUP 06 - ELECTRICAL SYSTEM

0615 - RADIO INTERFERENCE SUPPRESSION

NUT, PLAIN, HEXAGON: GROUND STRAP MTG,

1/4-20 THD SIZE

(11568) M939A

SCREW, CAP, HEXAGON HEAD: GROUND STRAP MTG,


(96906) MS35297-6

STRAP, GROUND

(11568) M640

WASHER, LOCK: GROUND STRAP MTG, 1/4 IN. SCREW SIZE,

EXTERNAL TOOTH

(96906) MS35335-19

GROUP 15 - FRAME

1501 - FRAME ASSEMBLY

BASE ASSEMBLY

(11568) M757

B

B

USABLE ON CODE

(4)

UNIT OF ISSUE

EA

EA

EA

(5) (6) (7)

QTY

INC

QTY

INC

UNIT UNIT

PACK

15-DAY ORGANIZATIONAL

MAINTENANCE ALW

(A) (B) (C) (D)

1-5 6-20 21-50 51-100

2

(8)

ILLUS-

TRATION

(A) (B)

FIG.

ITEM

NO NO.

1 5

4

2

1

1

11

4

1 12 EA

EA

4

6 1 3

B

EA

EA

EA

EA

EA

2

1

1

2

1

4

4 10

4 8

4

4

7

9

4 5

(1) (2)

SMR

CODE

-----

INDEX

NO

FEDERAL

STOCK

NUMBER

O

00056

5310-732-0588

X20

00057

X20

00058

X20

00059

O

00060

5305-269-3213

O

00061

5310-186-7448

00062

00063

O

00064

5306-638-1459

X20

00065

O

00066

5310-880-7744

X20

00067

O

00068

5310-514-6674

00069

00070

X20

00071

(3)

DESCRIPTION


NUT, PLAIN, HEXAGON: BASE MTG, 3/8-16 THD SIZE

(96906) MS35690-605

PLATE, FRONT ANCHOR

(11568) M778

PLATE, REAR ANCHOR

(11568) M779

PLATE, SIDE ANCHOR

(11568) M777

SCREW, CAP, HEXAGON HEAD: BASE MTG, 3/8-16 THD SIZE,

1 1/4 IN. LG

WASHER, LOCK: BASE MTG, 3/8 IN. SCREW SIZE

GROUP 18 - BODY, CAB, HOOD AND HULL

1808 - TOOL BOX

BOLT, MACHINE, HEXAGON: TOOL BOX MTG,

5/16-18 THD SIZE, 3/4 IN. LG

BOX ASSEMBLY, TOOL

(11568) Z539

NUT, PLAIN, HEXAGON: TOOL BOX MTG, 5/16-18 THD SIZE

(96906) MS35690-505

PADLOCK WITH CLEVIS, CHAIN, KEYS

(11568) M846

WASHER, LOCK: TOOL BOX MTG, EXTERNAL TOOTH,

5/16 IN. SCREW SIZE

GROUP 22 - BODY, CHASSIS OR HULL AND ACCESSORY ITEMS

2201 - CANVAS, RUBBER OR PLASTIC ITEMS

COVER, CANVAS

(11568) M756

B

B

B

B

B

B

B

B

B

B

B

USABLE ON CODE

B

(4)

UNIT OF ISSUE

EA

EA

EA

EA

EA

EA

(5) (6) (7)

QTY

INC

QTY

INC

UNIT UNIT

PACK

15-DAY ORGANIZATIONAL

MAINTENANCE ALW

(A) (B) (C) (D)

1-5 6-20 21-50 51-100

8

(8)

ILLUS-

TRATION

(A) (B)

FIG.

ITEM

NO NO.

4 12

1

1

4

8

8

4

4

4

4

4

17

13

14

6

11

EA

EA

EA

EA

EA

EA

4

1

4

4

1

4

4

4

4

19

1

15

16

1

5

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


00072 2202 - ACCESSORY ITEMS

P O 4910-030-2365 GAUGE, TIRE PRESSURE EA 1 * * * * 3 8

00073 (11568) Z218B

X1 CHAIN, LINK EA 2

00074 (94894) 1507

X1 COUPLER EA 1 3 9

00075 (94894) 61F1-715

X1 6685-910-8359 GAGE, PRESSURE, DIAL INDICATING EA 1

00076 (94894) 1506

X1 HOSE, WHIP EA 1

00077 (94894) 506-32

X1 4910-806-8185 INFLATOR-GAGE, PNEUMATIC EA 1

00078 (94894) 506

X1 PLUG EA 2

00079 (94894) 729

X1 PROBE, STANDARD EA 1

00080 (94894) 5004

X1 RING, KEY: 1/2 IN. EA 2

00081 (94894) 1509

X1 RING,KEY: 7/8 IN. EA 1

00082 (94894) 1508

P O 4310-874-3179 HOSE ASSEMBLY, AIR: 50 FT EA 1 * * * * 3 5

00083 (11568) Z538A

X1 4730-595-1721 ADAPTER, STRAIGHT, PIPE TO HOSE EA 1

00084 (53477) 6362

X20 COUPLING EA 1 3 4

00085 (72219) M3413

X20 FERRULE, HOSE EA 2

00086 (53477) DD

6

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X1 HOSE, RUBBER: 2 BRAID EA 1

00087 (78394) 11613

(50 FT REQUIRED)

X20 NUT, UNION EA 1

00088 (72219) C1439

X20 STEM, HOSE EA 1

00089 (72219) J2807

00090 2210 - DATA PLATES

O NUT, PLAIN, HEXAGON: INSTRUCTION PLATE MTG, BRASS, B EA 4

00091 NO. 3-56 THD SIZE

(11568) M1054A

X20 2805-690-8860 PACKING, PREFORMED: INSTRUCTION PLATE MTG B EA 4

00092 (11568) OR12

X20 PLATE, IDENTIFICATION B EA 1

00093 (11568) M851

X20 PLATE, IDENTIFICATION A EA 1

00094 (11568) M852

X20 PLATE, INSTRUCTION EA 1

00095 (11568) M811

O SCREW, DRIVE: IDENTIFICATION PLATE MTG, EA 4

00096 NO. 8 SCREW SIZE, 3/8 IN. LG, TYPE V

(11568) M835

O SCREW, DRIVE: INSTRUCTION PLATE MTG, A EA 4

00097 NO. 4 SCREW SIZE, 1/4 IN. LG

(11568) M1058A

O SCREW, MACHINE: INSTRUCTION PLATE MTG, BRASS, B EA 4

00098 NO. 3-56 THD SIZE, 1/4 IN. LG

(11568) M1053A

O WASHER, FLAT: INSTRUCTION PLATE MTG, BRASS, B EA 4

00099 7/64 IN. ID

(11568) M1055A

7

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


O WASHER, LOCK: INSTRUCTION PLATE MTG, BRASS, B EA 4

00100 EXTERNAL TOOTH, NO. 3 SCREW SIZE

(11568) M1056A

00101 GROUP 47 - GAGES

00102 4702 - GAGES

P O 6685-264-3961 GAGE, PRESSURE, DIAL EA 1 * * * * 3 11

00103 (94894) 20-1000-02LXPS

00104 GROUP 50 - PNEUMATIC EQUIPMENT

00105 5000 - AIR COMPRESSOR ASSEMBLY

X20 ATTACHMENT, LIFTING: COMPRESSOR B EA 1

00106 (11568) M853

X20 R COMPRESSOR ASSEMBLY EA 1

O 5310-732-0588 NUT, PLAIN HEXAGON: COMPRESSOR MTG, 3/8-16 THD SIZE EA 4 7 57

00108 (96906) MS35690-605

O 5305-269-3213 SCREW, CAP, HEXAGON HEAD: COMPRESSOR MTG, EA 4 7 55

00109 3/8-16 THD SIZE, 1 1/4 IN. LG

O 5310-186-7448 WASHER, LOCK: COMPRESSOR MTG, 3/8 IN. SCREW SIZE EA 8 7 56

00110

00111 5001 - CRANKCASE, BLOCK. CYLINDER HEAD

O 5306-225-8499 BOLT, MACHINE: HAND HOLE PLATE MTG, EA 6 7 25

00013 5/16-18 THD SIZE, 1 IN. LG

(11568) M458

X20 CRANKCASE EA 1 7 50

00114 (11568) NR9A

O GASKET: HAND HOLE PLATE MTG EA 1 7 23

00115 (11568) NR31B

8

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X20 PLATE, HAND HOLE EA 1 7 24

00116 (11568) NR15A

O 5305-710-4192 SCREW, CAP, HEXAGON: CYLINDER HEAD MTG, EA 6 6 25

00121 7/16-20 THD SIZE, 1 1/4 IN. LG

(96906) MS35292-87


00139 5005 - VALVES, CAMSHAFT AND TIMING MECHANISM

P O 4310-875-4107 GASKET SET: VALVE EA 1 * * * *

00140 (11568) Z102G

X1 5330-584-8999 GASKET EA 1

00141 (79150) 2325

X1 5330-584-9011 GASKET EA 1

00142 (79150) 4298

X1 GASKET EA 1

00143 (79150) 2237

X1 5330-584-9010 GASKET EA 2

00144 (79150) 2165

X1 5330-599-5888 GASKET EA 2

00145 (79150) 2185

P O 4310-631-3396 VALVE ASSEMBLY, DISCHARGE: HIGH PRESSURE EXHAUST EA 1 * * * * 6 43

00146 (11568) Z115

X1 5330-599-5888 GASKET: VALVE EA 1 11 1

00147 (79150) 2185

(COMPONENT OF GASKET KIT, STOCK NO. 4310-875-4107)

X1 5330-584-9010 GASKET: VALVE EA 11 8

00148 (79150) 2165


X1 4310-625-6753 HOUSING, HIGH PRESSURE VALVE EA 1 11 4

00149 (11568) RE7-53A

9

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


O 5305-952-0760 SCREW, MACHINE: NO. 10-32 THD SIZE, 3/8 IN. LG EA 1 11 2

00150

X1 4310-625-6752 SEAT, HIGH PRESSURE, EXHAUST: VALVE EA 1 11 7

00151 (11568) RE7-57A

X1 4310-616-4372 SPRING, HELICAL, COMPRESSION: VALVE EA 1 11 5

00152 (11568) RE7-60

X1 5310-625-6755 WASHER, FLAT EA 1 11 6

00153 (11568) RE10-62

O 5310-010-6497 WASHER, LOCK: VALVE EA 1 11 3

00154 (96906) MS35335-7

P O 4310-631-3398 VALVE ASSEMBLY, DISCHARGE: LOW PRESSURE EXHAUST EA 1 * * * * 6 42

00155 (11568) Z117

X1 5330-252-6639 GASKET: VALVE EA 1 11 16

00156 (79150) 2237


X1 5330-584-9011 GASKET: VALVE EA 1 11 21

00157 (79150) 4298


X1 4310-625-6759 HOUSING, LOW PRESSURE VALVE EA 1 11 20

00158 (11568) RE10-51A


00159

X20 4310-625-6757 SEAT, LOW PRESSURE EXHAUST: VALVE EA 1 11 17

00160 (11568) RE10-65A

X1 4310-619-0215 SPRING, HELICAL, COMPRESSION: VALVE B EA 1 11 19

00161 (11568) RE10-59

O 5310-625-6758 WASHER, FLAT EA 1 11 18

00162 (11568) RE10-61

O 5310-010-6497 WASHER, LOCK: NO. 10 SCREW SIZE EA 1 11 3

00163 (96906) MS35335-7

P O 4310-631-3397 VALVE ASSEMBLY, INLET: HIGH PRESSURE EA 1 * * * * 6 6

00164 (11568) Z113

10

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X1 5330-584-9010 GASKET: VALVE EA 1 11 8

00165 (79150) 2165


X1 5330-599-5888 GASKET: VALVE EA 1 11 1

00166 (79150) 2185


X1 HOUSING, HIGH PRESSURE VALVE EA 1 11 9

00167 (11568) RE7-52A


00168

X20 4310-625-6754 SEAT, HIGH PRESSURE INLET: VALVE EA 1 11 10

00169 (11568) RE7-56A

P O 4310-616-4372 SPRING, HELICAL, COMPRESSION: VALVE EA 1 * * 2 2 11 5

00170 (11568) RE7-60

O 5310-625-6755 WASHER, FLAT EA 1 11 6

00171 (11568) RE10-62

O 5310-010-6497 WASHER, LOCK: NO. 10-32 SCREW SIZE EA 1 11 3

00172 (96906) MS35335-7

P O 4310-631-3399 VALVE ASSEMBLY, INLET: LOW PRESSURE INTAKE EA 1 * * * * 6 19

00173 (11568) Z118

X1 GASKET: VALVE EA 1 11 15

00174 (11568) RE14-75A



00175 (11568) RE14-72


00176

X20 4310-625-6760 SEAT, LOW PRESSURE, INLET VALVE EA 1 11 11

00177 (11568) RE14-71


00178 (11568) RE14-58

11

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


0 5310-625-6761 WASHER, FLAT EA 1 11 12

00179 (11568) RE14-70

0 5310-010-6497 WASHER, LOCK: NO. 10-32 THD SIZE EA 1 11 3

00180 (96906) MS35335-7

00181 5006 - LUBRICATION SYSTEM

0 4730-228-1619 CAP, PIPE: OIL DRAIN, 3/8 IN. NPT A EA 1 7 27

00182 (11568) 14461

0 4730-192-9513 NIPPLE PIPE: COMPRESSOR CRANKCASE OIL DRAIN, A EA 1 7 26

00183 3/8 IN. NPT, 6 IN. LG

(11568) M460

X20 PLUG, PIPE: OIL DRAIN, 1/4 IN. NPT EA 2 7 20

00184 (11568) M504

X20 4730-263-3124 PLUG, PIPE: OIL FILLER MOLE, 3/4 IN. NPT EA 1 7 51

00185

X20 TUBE, BREATHER EA 1 6 20

00186 (11568) UB375

X20 COUPLING, STRAIGHT: 3/8 X 1/4 EA 1

00187 (11568) Z509

0 4730-287-1537 NUT, TUBE COUPLING EA 1 6 21

00188 (96906) MS39176-5

0 4730-273-8561 ADAPTER, STRAIGHT, PIPE TO TUBE EA 1 6 22

00189

00190 5007 - COMPRESSOR DRIVE

P O 3030-854-7351 BELT, V, MATCHED SET ST 2 * * 2 2 5 2

00191 (25472) 4L710-2

0 BOLT, MACHINE, SQUARE HEAD: FLYWHEEL MTG, EA 1 7 14

00192 1/2-13 THD SIZE, 4 IN. LG

(11568) RE4-105

12

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X20 BRACKET: GUARD MTG EA 1 5 3

00193 (11568) M842


00194 (11568) M843


00195 (11568) Z271-3

X20 FLYWHEEL EA 1 7 15

00196 (11568) NR7A EA 1 7 15

X20 GUARD ASSEMBLY, BELT EA 1 5

00197 (11568) Z543

X20 SHELL, GUARD EA 1 5 7

00198 (11568) Z271-1

X20 SHIELD EA 1 5 1

00199 (11568) M847

0 KEY, MACHINE: FLYWHEEL MTG, 1/4 IN. SQ, 2 IN. LG EA 1 7 17

00200 (11567) SE5-8

0 5310-596-7373 NUT, PLAIN, HEXAGON: GUARD MTG, 3/8-16 THD SIZE EA 1 5 9

00201


00202 (96906) MS35690-505

0 5310-768-0318 NUT, PLAIN, HEXAGON: FLYWHEEL MTG, 1/2-13 THD SIZE EA 1 7 16

00203 (96906) MS35690-805

0 5305-012-2119 SCREW, CAP, HEXAGON HEAD: GUARD MTG, EA 7 5 13

00204 3/8-18 THD SIZE, 3/4 IN. LG

(96906) MS35291-58

0 5310-044-6548 WASHER, FLAT: GUARD MTG, 3/8 IN. SCREW SIZE EA 1 5 11

00205


00206

0 5310-186-7448 WASHER, LOCK: GUARD MTG, EXTERNAL TOOTH, EA 1 5 12

00207 3/8 IN. SCREW SIZE

13

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.




00209 5008 - AIR INTAKE

X20 HEAD UNLOADER ASSEMBLY, LOW PRESSURE EA 1 6 18

00210 (11568) Z545

X20 CLAW, LOW PRESSURE EA 1 10 8

00211 (11568) N1-21-13

X20 CYLINDER EA 1 10 2

00212 (11568) N1-15-6

X20 MANIFOLD, INTAKE, LOW PRESSURE EA 1 10 7

00213 (11568) R10HUB2

X20 NUT, LOCK EA 2 10 6

00214 (11568) M151

P O 4310-065-0338 PACKING, PREFORMED EA 1 * * 2 2 10 1

00215 (11568) OR111

X20 PISTON EA 1 10 4

00216 (11568) N1-15-4

X20 ROD, PISTON EA 1 10 5

00217 (11568) N1-15-3

X20 SPRING EA 1 10 9

00218 (11568) TD8

X20 MUFFLER ASSEMBLY, INTAKE EA 1 6 24

00219 (11568) Z66A

X1 4310-993-4188 COVER, FILTER, LOWER EA 1 8 6

00220 (11568) M30

X1 COVER, FILETER, UPPER EA 1 8 2

00221 (11568) M673

X20 ELEMENT EA 1 8 4

00222 (11568) M673

0 5310-176-8097 NUT, PLAIN, HEXAGON EA 1 8 1

00223 (88044) AN340C10

14

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X20 PLATE EA 1 8 3

00224 (11568) M54C

X20 SCREEN EA 1 8 5

00225 (11568) M674

0 SCREW, MACHINE: MUFFLER, 3/16 X 5 1/2 IN. LG EA 1 8 7

00226 (88044) AN515C10-88

0 5305-637-4042 SCREW, CAP, HEAXAGON HEAD: LOW PRESSURE UNLOADER ASSEMBLY EA 2 6 4

00227 MTG, 3/8-16 THD SIZE, 1 3/4 IN. LG

(96906) MS35291-65

0 5305-010-2705 SETSCREW: MUFFLER MTG, 1/4-20 THD SIZE, 1/4 IN. LG EA 1 6 23

00228 (24617) 102705

00229 5009 - UNLOADER SYSTEM COMPONENTS

X20 BRACKET: CYLINDER MTG A EA 1 6 37

00230 (11568) M724

X20 BRACKET: CYLINDER MTG B EA 1 6 37

00231 (11568) M723

X20 BRACKET: PILOT VALVE MTG EA 1 6 27

00232 (11568) M807

X20 4310-896-5984 BREATHER: UNLAODER EA 1

00233 (11568) Z60A

X1 BODY, UNLOADER MUFFLER EA 1 7 36

00234 (11568) M1046

X1 FELT EA 1 7 38

00235 (11568) M97A

X1 SCREEN EA 1 7 37

00236 (11568) M98A

X20 BUSHING, REDUCING: 1/4 X 18 NPT EA 1

00237 (11568) M947B

X20 4820-391-3782 COCK, SHUTOFF, SCREW TYPE EA 1 6 32

00238 (79470) A555

15

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.



00239 (11568) Z509


00240 (11568) M509


00241

X20 ELBOW, PIPE TO TUBE: 1/4 IN. NPT ONE END, EA 1 7 3

00249 1/8 IN. TUBE OTHER END, 90 DEG

(11568) Z513

0 4730-277-8837 ELBOW, PIPE TO TUBE EA 1

00250 (11568) M513

0 4730-142-1593 NUT, COMPRESSION EA 1 7 2

00251

P O 4310-927-5652 GASKET SET: GOVERNOR EA * * * * 7 31

00253 (11568) Z130

(AS REQUIRED)

X1 4310-633-6114 GASKET: .005 IN. THK EA 1

00254 (11568) SE14-30A

X1 GASKET: .010 IN THK EA 1

00255 (11568) SE14-30B

X1 GASKET: .015 IN. THK EA 1

00256 (11568) SE14-30C

X1 4310-585-9950 GASKET: 03125 IN. THK EA 1

00257 (11568) SE14-30

X20 NIPPLE, PIPE: TANK TO CHECK VALVE, 1/2 IN. NPT, A EA 1

00260 3 IN. LG

(11568) M1057B

X20 NIPPLE, PIPE: TANK TO CHECK VALVE, 1/2 IN. NPT, B EA 1

00261 4 IN. LG

(11568) M1030B

X20 TUBE, ACTUATING EA 1 6 13

00270 (11568) M801

16

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.



00271

X20 NUT, COMPRESSION EA 1 6 31

00272 (11568) M545

X20 SLEEVE, COMPRESSION EA 1 6 11

00273 (11568) M546

X20 TUBE, MANIFOLD EA 1 6 8

00274 (11568) M705

X20 ELBOW, COMPRESSION: 90 DEGREE EA 1

00275 (11568) M499

X20 4730-277-8837 ELBOW, PIPE TO TUBE: MANIFOLD TUBE EA 1 6 17

00276


00277 (11568) M545

0 4730-142-1593 NUT, COMPRESSION: MANIFOLD TUBE EA 2 6 10

00278

0 SLEEVE, COMPRESSION: MANIFOLD TUBE EA 2 6 11

00279 (11568) M546

X20 TEE, BRANCH: MANIFOLD TUBE EA 1 6 12

00280 (11568) M535

X20 TUBE, SENSING A EA 1 6 26

00281 (11568) M858

X20 TUBE, SENSING B EA 1 6 26

00282 (11568) M848

X20 BODY, COMPRESSION: 1/4 X 1/4 EA 1

00283 (11568) M441

X20 ELBOW, COMPRESSION: 90 DEG, 1/4 X 1/4 EA 1

00284 (11568) M499

X20 NUT, COMPRESSION: 1/4 IN. EA 2

00285 (11568) M545

X20 SLEEVE, COMPRESSION: 1/4 IN. EA 2

00286 (11568) M546

17

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X20 TUBE, SLOWDOWN EA 1 6 30

00287 (11568) M849


00288 (11568) M545


00289 (11568) M546

X20 TEE: MALE BRANCH, 1/4 X 1/4 X 1/8 EA 1 6 12

00290 (11568) M535

X20 4310-961-5554 TUBING, RELIEF VALVE EA 1 6 1

00291 (11568) SB250A

X20 ELBOW, PIPE TO TUBE: 90 DEG, 1/4 X 1/8 NPT EA 2 6 3

00292 (11568) Z513


00293


00294

X20 VALVE ASSEMBLY, CHECK B EA 1 6 40

00295 (11568) ZR44

(COMPONENTS SAME AS VALVE ASSEMBLY, STOCK NO. (11568)

Z544, EXCEPT WHERE INDIVIDUAL ITEMS ARE ANNOTATED)

X20 VALVE ASSEMBLY, CHECK A EA 1 6 40

00296 (11568) Z544

X20 BODY, VALVE B EA 1 9 1

00297 (11568) R10-44B

(USED ON VALVE ASSEMBLY, STOCK NO. (11568)

ZR44, ONLY)

X20 BODY, VALVE A EA 1 9 1

00298 (11568) R10-44D

(USED ON VALVE ASSEMBY, STOCK NO. (11568)

Z544, ONLY)

X1 5330-584-9010 GASKET EA 1 9 2

00299 (11568) RE10-66

X1 PACKING, PREFORMED EA 1 9 4

00300 (11568) 0R218

18

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X1 PLUG EA 1 9 5

00301 (11568) M806

P O 4310-654-3590 VALVE ASSEMBLY, AIR EA 1 * * * * 9 3

00302 (11568) Z114

P O 4310-858-8107 VALVE ASSEMBLLY, INTERSTAGE SAFETY EA 1 * * * * 6 9

00303 (75336) 128

P O 4820-909-6585 VALVE ASSEMBLY, PILOT EA 1 * * * * 6 29

00304 (75336) 751100F1G751

X1 BARREL, ADJUSTING EA 1

00305 (75336) 750103

X1 BASE EA 1

00306 (75336) 750W101

X1 BODY EA 1

00307 (75336) 751102

X1 GUIDE, SPRING EA 1

00308 (75336) 750108

X1 LOCKNUT EA 1

00309 (75336) KC565-2-12

X1 LOCKNUT EA 1

00310 (75336) 750104

X1 PACKING, PREFORMED EA 1

00311 (75336) KC600-1-7

X1 PACKING, PREFORMED: VALVE EA 1

00312 (75336) KC601-1-4Q

X1 PACKING, PREFORMED: VALVE SEAT EA 1

00313 (75336) KC601-1-5Q

X1 RIVET, VALVE EA 1

00314 (75336) 7501048

X1 SCREW, ADJUSTING EA 1 6 28

00315 (75336) 750105

19

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X1 SPRING EA 1

00316 (75336) KC780-118

X1 VALVE EA 1

00317 (75336) 750104A

X1 WASHER, SEAT EA 1

00318 (75336) 750109

P O 4310-013-7320 VALVE ASSEMBLY, RELIEF EA 1 * * * *

00319 (11568) Z124-14A

X1 3110-198-1050 BALL BEARING: RELEASE VALVE EA 1 7 41

00320 (11568) SE5-95

X1 BODY, RELEASE EA 1 7 39

00321 (11568) NR101

X1 4310-625-6747 PLUNGER, RELEASE VALVE EA 1 7 42

00322 (11568) SE5-86B

X1 4310-610-4373 SPRING, HELICAL, COMPRESSION EA 1 7 40

00323 (11568) SE5-91

P O 4820-844-8636 VALVE, RELEASE SAFETY EA 1 * * * * 3 1

00324 (75336) 112

0 5310-012-1753 WASHER, LOCK: BRACKET MTG, 1/4 IN. SCREW SIZE EA 1

00326 (96906) MS35335-19

00329 5010 - COMPRESSOR COOLING

X20 HEAD UNLOADER ASSEMBLY, HIGH PRESSURE EA 1 6 7

00330 (11568) Z546

X20 CLAW: HIGH PRESSURE EA 1 10 8

00331 (11568) N1-15-13


00332 (11568) N1-15-6

X20 4310-065-0339 GASKET EA 1 10 3

00333 (11568) NRS34

X20 MANIFOLD, INTAKE, HIGH PRESSURE EA 1 10 7

00334 (11568) NE15-2A

20

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.



00335 (11568) M151

P O 4310-065-0338 PACKING, PREFORMED EA 1

00336 (11568) OR111

(INITIALLY SHOWN AS INDEX NO. 00215)

X1 PISTON EA 1 10 4

00337 (11568) N1-15-4


00338 (11568) N1-15-3


00339 (11568) TD8

X20 4730-277-9741 FERRULE, TUBE EA 4 6 14

00340 (11568) SE5-42

0 4730-850-7971 INVERTED NUT, TUBE COUPLING EA 4 6 15

00341 (11568) SE5-41

X20 MANIFLOD, LOW PRESSURE, EXHAUST EA 1 6 44

00342 (11568) RE10-2E

X20 MANIFOLD, HIGH PRESSURE, EXHAUST EA 1 6 5

00343 (11568) NR2B

0 5305-637-4042 SCREW, CAP, HEXAGON HEAD: MANIFOLD MTG, EA 2 6 4

00344 3/8-16 THD SIZE, 1 3/4 IN. LG

(96906) MS35291-65

X20 TUBE, AFTERCOOLER EA 1 6 41

00345 (73540) C1286

X20 4310-977-8670 TUBE, INTERCOOLER EA 1 6 16

00346 (11568) RE4-12A

00347 5014 - AIR RECEIVER

X20 4730-228-9930 BODY: 1/4 X 1/4 B EA 1

00348 (11568) M441

0 5306-638-1459 BOLT, MACHINE, HEXAGON HEAD: TANK MTG, EA 4 4 19

00349 5/16-18 THD SIZE, 3/4 IN. LG

(11568) M567

21

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X20 4310-874-3181 COCK, DRAIN: RECEIVER TANK EA 1 8 7

00350 (92976) 1825A

0 ELBOW, PIPE, STREET: TANK TO CHECK VALVE B EA 1

00351 (11568) M989B

0 5310-012-0376 NUT, PLAIN, HEXAGON: TANK MTG, 5/16-18 THD SIZE B EA 4 4 15

00352 (11568) M935A

X20 RECEIVER, AIR A EA 1 3 2

00353 (11568) P2924D

X20 PLUG, PIPE: INSPECTION HOLE, 2 IN. NPT A EA 2 3 10

00354 (11568) M569

X20 RECEIVER, AIR B EA 1 4 2

00355 (11568) P2221G42

X20 PLUG, PIPE: TANK INSPECTION, 1 1/2 IN. NPT B EA 2 4 18

00356 (11568) M1001

0 5310-013-8485 WASHER, LOCK: TANK MTG, 5-16 IN. SCREW SIZE B EA 4 4 16

00357 (11568) M911A

00358 5015 - AIR DISCHARGE SYSTEM

X20 NIPPLE, PIPE: CLOSE, GLOVE VALVE MTG, 1/4 IN. NPT B EA 1 4 3

00359 (11568) M1015B

X20 NIPPLE, PIPE: CLOSE, GLOBE VALVE MTG, 1/2 IN. NPT A EA 1 4 3

00360 (11568) M1027B

X20 VALVE ASSEMBLY, GLOBE: RECEIVER TANK OUTLET, A EA 1 3 3

00361 1/2 IN. NPT

(86107) 592-14

X1 BODY A EA 1

00362 (86107) 4752-712

X1 BONNET A EA 1

00363 (86107) 4490

X1 HANDLE A EA 1

00364 (86107) 588

22

(1) (2) (3) (4) (5) (6) (7) (8)

ILLUS-





NO NO NO.


X20 NUT, BONNET A EA 1

00365 (86107) 4431

X20 PACKING A EA 1

00366 (86107) 811

X20 SCREW A EA 1

00367 (86107) 107S

X20 SCREW, SEAT A EA 1

00368 (86107) 105

X1 STEM A EA 1

00369 (86107) 4491

X20 WASHER, ASBESTOS A EA 1

00370 (86107) 402E

X20 WASHER, SEAT A EA 1

00371 (86107) 917

X20 VALVE ASSEMBLY, GLOBE: OUTLET, RECEIVER TANK, B EA 1 4 4

00372 1/4 IN. NPT

(86107) N3685

X1 BODY B EA 1

00373 (86107) 5-4701

X1 HANDLE B EA 1

00374 (86107) H2449

X1 NUT, PACKING B EA 1

00375 (86107) C1428

X1 PACKING B EA 1

00376 (86107) D1615

X1 SCREW B EA 1

00377 (86107) B1200

X1 STEM B EA 1

00378 (86107) G2235

X1 WASHER, SEAT B EA 2

00379 (86107) D1620

23

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)

SMR QTY 30-DAY 30-DAY 1-YR DEPOT ILLUS-

CODE FEDERAL DESCRIPTION INC QTY DS MAINT GS MAINT ALW MAINT TRATION

_____ STOCK IN INC ALLOWANCE ALLOWANCE PER ALW- (A) (B)

INDEX NUMBER UNIT IN (A) (B) (C) (A) (B) (C) 100 PER

NO. PACK UNIT EQUIP 100 FIG ITEM

REFERENCE NO. & MFR. CODE USABLE ON CODE UNIT OF ISSUE 1-20 21-50 51-100 1-20 21-50 51-100 CNTGCY EQUIP NO. NO.

00001 SECTION V - REPAIR PARTS FOR DS, GS, AND DEPOT

MAINTENANCE

00002 GROUP 01 - ENGINE

00003 0100 - ENGINE ASSEMBLY

0 5306-225-8499 BOLT, MACHINE: ENGINE MTG, 5/16-18 THD SIZE, EA 4 1 6

00004 1 IN. LG

(96906) MS35295-34

P O T 2805-068-7512 ENGINE, GASOLINE EA 1 * * 2 * * 2 6 6 1 1

00005 (81336) 4A032-11

X20 EXTENSION: ENGINE OIL DRAIN A EA 1

00006 (11568) M724

X1 2805-690-8866 PACKING, PREFORMED: ENGINE OIL DRAIN A EA 1

00007 (11568)

0 NUT, PLAIN, HEXAGON: ENGINE MTG, 5/16-18 THD SIZE EA 4 1 8

00008 (11568) M936A

0 5310-209-0110 WASHER, FLAT: ENGINE MTG, 5/16 IN. SCREW SIZE EA 4 1 9

00009

0 5310-514-6674 WASHER, LOCK: ENGINE MTG, 5/16 IN. SCREW SIZE EA 4 1 7

00010 (11568) M911A


X20 2930-014-6993 BUSHING, SLEEVE: V PULLEY EA 1 5 16

00012 (11568) M721

X20 PULLEY, V: COMPRESSOR FLYWHEEL DRAIN EA 1 5 17

00013 (11568) M722

0 5305-225-3839 SCREW, CAP, HEXAGON HEAD: BUSHING MTG TO PULLEY, EA 2 5 14

00014 1/4-20 THD SIZE, 1 IN. LG

(96906) MS90725-8

0 SCREW, CAP, HEXAGON: STUB SHAFT MTG, EA 4 5 20

00014A 5/16-24 THD SIZE, 1 IN. LG

(11568) M924A

24

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X20 STUB SHAFT, EXTENSION EA 1 5 18

00015 (11568) M725

0 5310-012-1753 WASHER, LOCK: BUSHING MTG TO PULLEY, 1/4 IN. SCREW SIZE, EA 2 5 15


(96906) MS35335-19

0 5310-514-6674 WASHER, LOCK: STUB SHAFT MTG, 5/16 IN. SCREW SIZE, EA 4 5 19

00016A EXTERNAL TOOTH

00017 0107 - ENGINE STARTING SYSTEM

P O 2990-142-0080 STARTING ROPE, ENGINE EA 1 * * 2 * * 2 6 25

00018 (96906) MS9786E

00019 GROUP 03 - FUEL SYSTEM

00020 0306 - TANKS, LINES, FITTINGS

X20 CLAMP: FUEL TANK MTG EA 1 2 1

00021 (11568) M841

X20 LINE, FUEL: TANK TO CARBURETOR EA 2 2 7

00022 (11568) M850

X20 BODY, FLARE: 1/4 X 1/8 IN. EA 1 * * 2 2 2 5

00023 (11568) M774

X20 NUT, FLARE: 1/4 IN. EA 1 2 6

00024 (11568) M773

0 4730-187-4200 PLUG, PIPE: FUEL TANK DRAIN, 1/8 IN. NPT EA 1 2 10

00025

0 5310-543-5180 NUT, SELF-LOCKING, HEXAGON: FUEL TANK CLAMP EA 2 2 11

00026

X20 TANK ASSEMBLY, FUEL EA 1 2 4

00027 (11568) Z540

X20 2910-496-4949 CAP, FUEL TANK EA 1 2 2

00028 (81118) CD297

25

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X20 2910-678-9133 FLANGE, FILLER NECK EA 1 2 3

00029 (81118) ND1252

00030 0309 - FUEL FILTERS

X20 ELBOW, PIPE, STREET: FILTER MTG TO TANK, 1/8 IN. NPT EA 1 2 9

00031 (11568) M979B

P O 2910-905-9792 FILTER, FLUID PRESSURE: FUEL EA 1 * * 2 * * 2 6 6 2 8

00032 (96906) MS51086-1

00033 0312 - ACCELERATOR, CHOCK CONTROLS

X20 ARM, THROTTLE EA 1 6 36

00034 (11568) M703

0 SCREW, MACHINE: THROTTLE ARM MTG, NO. 8-32 THD SIZE, EA 1 6 35

00035 1/2 IN. LG

(11568) M1052A

0 NUT, PLAIN, HEXAGON: THROTTLE ARM MTG, EA 1 6 34

00036 NO. 8-32 THD SIZE

(11568) M925A

0 WASHER, LOCK: THROTTLE ARM MTG, NO. 8 SCREW SIZE, EA 1


(11568) M918A

00038 GROUP 04 - EXHAUST SYSTEM

00039 0401 - MUFFLER AND PIPES

X20 BRACKET: MUFFLER SUPPORT LN EA 1 1 10

00040 (11568) M758

X20 BRACKET: MUFFLER SUPPORT RM EA 1 1 2

00041 (11568) N761

X20 2990-903-3864 MUFFLER, EXHAUST: ENGINE EA 2 1 5

00042 (11568) Z282

26

(1)

SMR

CODE

_____

INDEX

NO.

(2)

FEDERAL

STOCK

NUMBER

0

00043

0

00044

5305-068-0502

0

00045

0

00046

5310-012-1753

00047

00048

0

00049

5310-584-5005

0

00050

5305-068-0502

X20

00051

0

00052

5310-012-1753

00053

00054

X20

00055

(3)

DESCRIPTION


NUT, PLAIN, HEXAGON: MUFFLER MTG, 1/4-28 THD SIZE,

BRASS

(11568) M151

SCREW, CAP, HEXAGON HEAD: MUFFLER BRACKET MTG,


(96906) MS35297-6

STUD, PLAIN: MUFFLER MTG, 1/4-28 THD SIZE,

3/4 IN. LG

(11568) M759

WASHER, LOCK: MUFFLER BRACKET AND MUFFLER TO BRACKET

MTG, 1/4 IN. SCREW SIZE, EXTERNAL TOOTH

(96906) MS35335-19

GROUP 06 - ELECTRICAL SYSTEM

0615 - RADIO INTERFERENCE SUPPRESSION

NUT, PLAIN, HEXAGON: GROUND STRAP MTG,

1/4-20 THD SIZE

(11568) M939A

SCREW, CAP, HEXAGON HEAD: GROUND STRAP MTG,


(96906) MS35297-6

STRAP, GROUND

(11568) M640

WASHER, LOCK: GROUND STRAP MTG, 1/4 IN. SCREW SIZE,

EXTERNAL TOOTH

(96906) MS35335-19

GROUP 15 - FRAME

1501 - FRAME ASSEMBLY

BASE ASSEMBLY

(11568) M757

B

B

USABLE ON CODE

(4)

UNIT OF ISSUE

EA

(5) (6)

QTY

INC

IN

QTY

INC

UNIT IN

PACK UNIT

(7)

30-DAY

DS MAINT

ALLOWANCE

(A) (B)

1-20 21-50

4

(C)

51-100

(8)

30-DAY

GS MAINT

ALLOWANCE

(A) (B)

1-20 21-50

(C)

51-100

(9)

1-YR

ALW

PER

100

EQUIP

CNTGCY

(10)

DEPOT

MAINT

ALW-

PER

100

EQUIP

(11)

ILLUS-

TRATION

(A) (B)

FIG

NO.

1

ITEM

NO.

11

EA

EA

EA

2

4

6

1

1

1

4

12

3

B

EA

EA

EA

EA

EA

2

1

1

2

* * *

1

*

4

4

4

4

4

10

8

7

9

5

27

(1)

SMR

CODE

_____

INDEX

NO.

(2)

FEDERAL

STOCK

NUMBER

0

00056

5310-732-0588

X20

00057

X20

00058

X20

00059

0

00060

5305-269-3213

0

00061

5310-186-7448

00062

00063

0

00064

5306-638-1459

X20

00065

0

00066

X20

00067

0

00068

00069

5310-880-7744

5310-514-6674

00070

X20

00071

(3)

DESCRIPTION


NUT, PLAIN, HEXAGON: BASE MTG, 3/8-16 THD SIZE

(96906) MS35690-605

PLATE, FRONT ANCHOR

(11568) M778

PLATE, REAR ANCHOR

(11568) M779

PLATE, SIDE ANCHOR

(11568) M777

SCREW, CAP, HEXAGON HEAD: BASE MTG, 3/8-16 THD SIZE,

1 1/4 IN. LG

WASHER, LOCK: BASE MTG, 3/8 IN. SCREW SIZE

GROUP 18 - BODY, CAB, HOOD AND HULL

1808 - TOOL BOX

BOLT, MACHINE, HEXAGON: TOOL BOX MTG,

5/16-18 THD SIZE, 3/4 IN. LG

BOX ASSEMBLY, TOOL

(11568) Z539

NUT, PLAIN, HEXAGON: TOOL BOX MTG, 5/16-18 THD SIZE

(96906) MS35690-505

PADLOCK WITH CLEVIS, CHAIN KEYS

(11568) M846

WASHER, LOCK: TOOL BOX MTG, EXTERNAL TOOTH,

5/16 IN. SCREW SIZE

GROUP 22 - BODY, CHASSIS OR HULL AND ACCESSORY

ITEMS

2201 - CANVAS, RUBBER OR PLASTIC ITEMS

COVER, CANVAS

(11568) M756

B

B

B

B

B

B

B

B

B

USABLE ON CODE

B

B

(4)

EA

EA

UNIT OF ISSUE

EA

EA

EA

EA

(5) (6)

QTY

INC

IN

QTY

INC

UNIT IN

PACK UNIT

(7)

30-DAY

DS MAINT

ALLOWANCE

(A) (B)

1-20 21-50

8

(C)

51-100

(8)

30-DAY

GS MAINT

ALLOWANCE

(A) (B)

1-20 21-50

(C)

51-100

(9)

1-YR

ALW

PER

100

EQUIP

CNTGCY

(10)

DEPOT

MAINT

ALW-

PER

100

EQUIP

(11)

ILLUS-

TRATION

(A) (B)

FIG

NO.

4

ITEM

NO.

12

1

1

4

4

17

13

4

8

4

4

14

6

8 4 11

EA

EA

EA

EA

EA

4

1

4

1

4

4

4

4

4

19

1

15

16

B EA 1

28

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







00072 2202 - ACCESSORY ITEMS

P O 4910-030-2365 GAUGE, TIRE PRESSURE EA 1 * * 2 * * 2 10 10 3 8

00073 (11568) Z218B

X1 CHAIN, LINK EA 2

00074 (94894) 1507

X1 COUPLER EA 1 3 9

00075 (94894) 61F1-715

X1 6685-910-8359 GAGE, PRESSURE, DIAL INDICATING EA 1

00076 (94894) 1506

X1 HOSE, WHIP EA 1

00077 (94894) 506-32

X1 4910-806-8185 INFLATOR-GAGE, PNEUMATIC EA 1

00078 (94894) 506

X1 PLUG EA 2

00079 (94894) 729

X1 PROBE, STANDARD EA 1

00080 (94894) 5004


00081 (94894) 1509


00082 (94894) 1508

P O 4310-874-3179 HOSE ASSEMBLY, AIR: 50 FT EA 1 * * 2 * * 2 6 10 3 5

00083 (11568) Z538A

X1 4730-595-1721 ADAPTER, STRAIGHT, PIPE TO HOSE EA 1

00084 (53477) 6362

X20 COUPLING EA 1 3 4

00085 (72219) M3413

X20 FERRULE, HOSE EA 2

00086 (53477) DD

29

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X1 HOSE, RUBBER: 2 BRAID EA 1

00087 (78394) 11613

(50 FT REQUIRED)

X20 NUT, UNION EA 1

00088 (72219) C1439

X20 STEM, HOSE EA 1

00089 (72219) J2807

00090 2210 - DATA PLATES

0 NUT, PLAIN, HEXAGON: INSTRUCTION PLATE MTG, BRASS EA 4

00091 NO. 3-56 THD SIZE

(11568) M1054A

X20 2805-690-8860 PACKING, PREFORMED: INSTRUCTION PLATE MTG B EA 4

00092 (11568) OR12

X20 PLATE, IDENTIFICATION B EA 1

00093 (11568) M851

X20 PLATE, IDENTIFICATION A EA 1

00094 (11568) M852

X20 PLATE, INSTRUCTION EA 1

00095 (11568) M811

0 SCREW, DRIVE: IDENTIFICATION PLATE MTG, EA 4

00096 NO. 8 SCREW SIZE, 3/8 IN. LG, TYPE V

(11568) M835 * * * *

0 SCREW, DRIVE: INSTRUCTION PLATE MTG, A EA 4

00097 NO. 4 SCREW SIZE, 1/4 IN. LG * * * *

(11568) M1058A

0 SCREW, MACHINE: INSTRUCTION PLATE MTG, BRASS, B EA 4

00098 NO. 3-56 THD SIZE, 1/4 IN. LG

(11568) M1053A

0 WASHER, FLAT: INSTRUCTION PLATE MTG, BRASS, B EA 4

00099 7/64 IN. ID

(11568) M1055A

0 WASHER, LOCK: INSTRUCTION PLATE MTG, BRASS, B EA 4

00100 EXTERNAL TOOTH: NO. 3 SCREW SIZE

(11568) M1056A

30

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







00101 GROUP 47 - GAGES

00102 4702 - GAGES

P O 6685-264-3961 GAGE, PRESSURE, DIAL EA 1 * * 2 * * 2 6 5 3 11

00103 (94894) 20-1000-02LXPS

00104 GROUP 50 - PNEUMATIC EQUIPMENT

00105 5000 - AIR COMPRESSOR ASSEMBLY

X20 ATTACHEMENT, LIFTING: COMPRESSOR B EA 1

00106 (11568) M853

X20 R COMPRESSOR ASSEMBLY EA 1

00107 (11568) R15HU

0 5310-732-0588 NUT, PLAIN, HEXAGON: COMPRESSOR MTG, 3/8-16 THD SIZE EA 4 7 57

00108 (96906) MS35690-605

0 5305-269-3213 SCREW, CAP, HEXAGON HEAD: COMPRESSOR MTG, EA 4 7 55

00109 3/8-16 THD SIZE, 1 1/4 IN. LG

0 5310-186-7448 WASHER, LOCK: COMPRESSOR MTG, 3/8 IN. SCREW SIZE EA 8 7 56

00110

00111 5001 - CRANKCASE, BLOCK, CYLINDER HEAD

A CRANKCASE SHAFT AND PISTON ASSEMBLY EA 1

00112 (11568) Z330

0 5306-225-8499 BOLT, MACHINE: HAND HOLE PLATE MTG, EA 6 7 25

00013 5/16-18 THD SIZE, 1 IN. LG

(11568) M458

X20 CRANKCASE EA 1 7 50

00114 (11568) NR9A

0 GASKET: HAND HOLE PLATE MTG EA 1 7 23

00115 (11568) NR31B

31

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X20 PLATE, HAND HOLE EA 1 7 24

00116 (11568) NR15A

X2F 6680-377-4915 WINDOW, OBSERVATION: OIL LEVEL EA 1 7 52

00117 (70925) B5093

X2F CYLINDER AND MANIFOLD ASSEMBLY EA 1

00118 (11568) Z329

X2F CYLINDER EA 1 6 39

00119 (11568) NR14-6A

X2F GASKET: CYLINDER FLANGE EA 1 6 38

00120 (11568) MR29A

0 5305-710-4192 SCREW, CAP, HEXAGON HEAD: CYLINDER HEAD MTG, EA 6 6 25

00121 7/16-20 THD SIZE, 1 1/4 IN. LG

(96906) MS35292-87


X2F CRANKSHAFT EA 1 7 28

00123 (11568) R15-5

A MAIN BEARING ASSEMBLY EA 2

00124 (11568) ZMR16

P F 3110-100-3150 CONE AND ROLLER, TAPERED BEARING EA 2 * 2 2 * 2 2 20 20 7 29

00125 (60038) 141384

P F 3110-100-0516 CUP, TAPERED, ROLLER BEARING EA 2 * 2 2 * 2 2 20 20 7 30

00126 (60038) 14276

P F 5330-724-0793 SEAL, PLAIN ENCASED: CRANKSHAFT, FLYWHEEL END EA 1 * * 2 * * 2 10 10 7 18

00127 (80201) 212112DSTYLE1

00128 5004 - PISTONS, CONNECTING RODS

X2F BOLT: CONNECTOR ROD EA 4 7 22

00129 (11568) R10-20

P F 4310-811-6046 BUSHING, SLEEVE: PISTON PIN EA 2 * 2 2 * 2 2 20 20 7 7

00130 (11568) R10-37

32

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X2F DIPPER, OIL EA 2 7 21

00131 (11568) R15-24

X2F PIN, PISTON EA 2 7 11

00132 (11568) R10-21

X2F PISTON, HIGH PRESSURE EA 1 7 9

00133 (1568) R10-4

X2F PISTON, LOW PRESSURE EA 1 7 13

00134 (11568) R15-4

X2F RING, PISTON RETAINING EA 2 7 8

00135 (11568) R10-102

P F 4310-649-8398 RING SET, PISTON: HIGH PRESSURE ST 1 * * 2 * * 2 10 10 7 10

00136 (11568) Z189B

P F 4310-773-7986 RING SET, PISTON: LOW PRESSURE ST 1 * * 2 * * 2 10 10 7 12

00137 (11568) Z179C

X2F ROD, CONNECTING EA 2 7 19

00138 (11568) R15-3

00139 5005-VALVES, CAMSHAFT AND TIMING

MECHANISM

P O 4310-875-4107 GASKET SET: VALVE EA 1 * * 2 * * 2 10 100

00140 (11568) Z102G

X1 5330-584-8999 GASKET EA 1

00141 (79150) 2325

X1 5330-584-9011 GASKET EA 1

00142 (79150) 4298

X1 GASKET EA 1

00143 (79150) 2237

X1 5330-584-9010 GASKET EA 2

00144 (79150) 2165

X1 5330-599-5888 GASKET EA 2

00145 (79150) 2185

33

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







P O 4310-631-3396 VALVE ASSEMBLY, DISCHARGE: HIGH PRESSURE EXHAUST EA 1 * * 2 * * 2 10 10 6 43

00146 (11568) Z115

X1 5330-599-5888 GASKET: VALVE EA 1 11 1

00147 (76150) 2185


X1 5330-584-9010 GASKET:VALVE EA 1 11 8

00148 (79150) 2165


X1 4310-625-6753 HOUSING, HIGH PRESSURE VALVE EA 1 11 4

00149 (11568) RE7-53A

0 5305-952-0760 SCREW, MACHINE: NO. 10-32 THD SIZE, 3/8 IN. LG EA 1 11 2

00150

X1 4310-625-6752 SEAT, HIGH PRESSURE, EXHAUST: VALVE EA 1 11 7

00151 (11568) RE7-57A


00152 (11568) RE7-60

X1 5310-625-6755 WASHER, FLAT EA 1 11 6

00153 (11568) RE10-62

0 5310-010-6497 WASHER, LOCK: VALVE EA 1 11 3

00154 (96906) MS35335-7

P O 4310-631-3398 VALVE ASSEMBLY, DISCHARGE: LOW PRESSURE EXHAUST EA 1 * * 2 * * 2 10 10 6 42

00155 (11568) Z117

X1 5330-252-6639 GASKET: VALVE EA 1 11 16

00156 (79150) 2237


X1 5330-584-9011 GASKET: VALVE EA 1 11 21

00157 (79150) 4298



00158 (11568) RE10-51A


00159

34

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X20 4310-625-6757 SEAT, LOW PRESSURE EXHAUST: VALVE EA 1 11 17

00160 (11568) RE10-65A

X1 4310-619-0215 SPRING, HELICAL, COMPRESSION: VALVE B EA 1 11 19

00161 (11568) RE10-59

0 5310-625-6758 WASHER, FLAT EA 1 11 18

00162 (11568) RE10-61

0 5310-010-6497 WASHER, LOCK: NO. 10 SCREW SIZE EA 1 11 3

00163 (96906) MS35335-7

P O 4310-631-3397 VALVE ASSEMBLY, INLET: HIGH PRESSURE EA 1 * * 2 * * 2 6 10 6 6

00164 (11568) Z113

X1 5330-584-9010 GASKET: VALVE EA 1 11 8

00165 (79150) 2165


X1 5330-599-5888 GASKET: VALVE EA 1 11 1

00166 (79150) 2185


X1 HOUSING, HIGH PRESSURE VALVE EA 1 11 9

00167 (11568) RE7-52A


00168

X20 4310-625-6754 SEAT, HIGH PRESSURE INLET: VALVE EA 1 11 10

00169 (11568) RE7-56A

P O 4310-616-4372 SPRING, HELICAL, COMPRESSION: VALVE EA 1 2 2 3 2 2 3 30 30 11 5

00170 (11568) RE7-60

0 5310-625-6755 WASHER, FLAT EA 1 11 6

00171 (11568) RE10-62

0 5310-010-6497 WASHER, LOCK: NO. 10-32 SCREW SIZE EA 1 11 3

00172 (96906) MS35335-7

P O 4310-631-3399 VALVE ASSEMBLY, INLET: LOW PRESSURE INTAKE EA 1 * * 2 * * 2 10 10 6 19

00173 (11568) Z118

X1 GASKET: VALVE EA 1 11 15

00174 (11568) RE14-75A


35

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)








00175 (11568) RE14-72


00176

X20 4310-625-6760 SEAT, LOW PRESSURE, INLET VALVE EA 1 11 11

00177 (11568) RE14-71


00178 (11568) RE14-58

0 5310-625-6761 WASHER, FLAT EA 1 11 12

00179 (11568) RE14-70

0 5310-010-6497 WASHER, LOCK: NO. 10-32 THD SIZE EA 1 11 3

00180 (96906) MS35335-7

00181 5006 - LUBRICATION SYSTEM

0 4730-228-1619 CAP, PIPE: OIL DRAIN, 3/8 IN. NPT A EA 1 7 27

00182 (11568) M461

0 4730-192-9513 NIPPLE PIPE: COMPRESSOR CRANKCASE OIL DRAIN, A EA 1 7 26

00183 3/8 IN. NPT, 6 IN. LG

(11568) M460

X20 PLUG, PIPE: OIL DRAIN, 1/4 IN. NPT EA 2 7 20

00184 (11568) M504

X20 4730-263-3124 PLUG, PIPE: OIL FILLER HOLE, 3/4 IN. NPT EA 1 7 51

00185

X20 TUBE, BREATHER EA 1 6 20

00186 (11568) UB375


00187 (11568) Z509


00188 (96906) MS39176-5


00189

36

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







00190 5007 - COMPRESSOR DRIVE

P O 3030-854-7351 BELT, V, MATCHED SET ST 2 2 2 3 2 2 3 30 30 5 2

00191 (25472) 4L710-2

0 BOLT, MACHINE, SQUARE HEAD: FLYWHEEL MTG, EA 1 7 14

00192 1/2-13 THD SIZE, 4 IN. LG

(11568) RE4-105


00193 (11568) M842


00194 (11568) M843


00195 (11568) Z271-3

X20 FLYWHEEL EA 1 7 15

00196 (11568) NR7A

X20 GUARD ASSEMBLY, BELT EA 1 5

00197 (11568) Z543

X20 SHELL, GUARD EA 1 5 7

00198 (11568) Z271-1

X20 SHIELD EA 1 5 1

00199 (11568) M847

0 KEY, MACHINE: FLYWHEEL MTG, 1/4 IN. SQ, 2 IN LG EA 1 7 17

00200 (11568) SE5-8


00201


00202 (96906) MS35690-505

0 5310-768-0318 NUT, PLAIN, HEXAGON: FLYWHEEL MTG, 1/2-13 THD SIZE EA 1 7 16

00203 (96906) MS35690-805

0 5305-012-2119 SCREW, CAP, HEXAGON HEAD: GUARD MTG, EA 7 5 13

00204 3/8-16 THD SIZE, 3/4 IN. LG

(96906) MS35291-58

37

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)








00205


00206





00209 5008 - AIR INTAKE

X20 HEAD UNLOADER ASSEMBLY, LOW PRESSURE EA 1 6 18

00210 (11568) Z545

X20 CLAW, LOW PRESSURE EA 1 10 8

00211 (11568) N1-21-13


00212 (11568) N1-15-6

X20 MANIFOLD, INTAKE, LOW PRESSURE EA 1 10 7

00213 (11568) R10HUB2


00214 (11568) M151

P O 4310-065-0338 PACKING, PREFORMED EA 1 2 2 3 2 2 3 30 100 10 1

00215 (11568) OR111

X20 PISTON EA 1 10 4

00216 (11568) N1-15-4


00217 (11568) N1-15-3


00218 (11568) TD8

X20 MUFFLER ASSEMBLY, INTAKE EA 1 6 24

00219 (11568) Z66A

38

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X1 4310-993-4188 COVER, FILTER, LOWER EA 1 8 6

00220 (11568) M30

X1 COVER, FILTER, UPPER EA 1 8 2

00221 (11568) M31A

X20 ELEMENT EA 1 8 4

00222 (11568) M673

0 5310-176-8097 NUT, PLAIN, HEXAGON EA 1 8 1

00223 (88044) AN340C10

X20 PLATE EA 1 8 3

00224 (11568) M54C

X20 SCREEN EA 1 8 5

00225 (11568) M674

0 SCREW, MACHINE: MUFFLER, 3/16 X 5 1/2 IN. LG EA 1 8 7

00226 (88044) AN515C10-88

0 5305-637-4042 SCREW, CAP, HEXAGON HEAD: LOW PRESSURE UNLOADER ASSEMBLY EA 2 6 4

00227 MTG, 3/8-16 THD SIZE, 1 3/4 IN. LG

(96906) MS35291-65

0 5305-010-2705 SETSCREW: MUFFLER MTG, 1/4-20 THD SIZE, 1/4 IN. LG EA 1 6 23

00228 (24617) 102705

00229 5009 - UNLOADER SYSTEM COMPONENTS

X20 BRACKET: CYLINDER MTG A EA 1 6 37

00230 (11568) M724

X20 BRACKET: CYLINDER MTG B EA 1 6 37

00231 (11568) M723

X20 BRACKET: PILOT VALVE MTG EA 1 6 27

00232 (11568) M807

X20 4310-896-5984 BREATHER: UNLOADER EA 1

00233 (11568) Z60A

X1 BODY, UNLOADER MUFFLER EA 1 7 36

00234 (11568) M1046

39

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X1 FELT EA 1 7 38

00235 (11568) M97A

X1 SCREEN EA 1 7 37

00236 (11568) M98A

X20 BUSHING, REDUCING: 1/4 X 1/8 NPT EA 1

00237 (11568) M947B

X20 4820-391-3782 COCK, SHUTOFF, SCREW TYPE EA 1 6 32

00238 (79470) A555


00239 (11568) Z509


00240 (11568) M509


00241

X2F COVER, GOVERNOR HOUSING EA 1 7 4

00242 (11568) RE10-100A

P F 4310-922-1911 CYLINDER ASSEMBLY, COMPRESSOR EA 1 * * 2 * * 2 6 5 6 33

00243 (11568) Z266

X1 BODY CYLINDER EA 1

00244 (11568) M708

X2F NUT, SELF-LOCKING, HEXAGON: CONDUIT, 3/8 IN. EA 2

00245 (11568) M1062A

X2F 2805-690-8866 PACKING, PREFORMED EA 1

00246 (11568) OR11

X1 PISTON, AIR CYLINDER EA 1

00247 (11568) M709

X1 SPRING, AIR CYLINDER EA 1

00248 (11568) M710

X20 ELBOW, PIPE TO TUBE: 1/4 IN. NPT ONE END, EA 1 7 3

00249 1/8 IN. TUBE OTHER END, 90 DEG

(11568) Z513

40

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)








00250 11568) M513


00251

P O 4310-585-4283 GASKET: GOVERNOR COVER TO HOUSING EA 1 * * 2 * * 2 6 10 7 34

00252 (11568) SE14-89

P O 4310-927-5652 GASKET SET: GOVERNOR (AS REQUIRED) EA * * 2 * * 2 6 10 7 31

00253 (11568) Z130

X1 4310-633-6114 GASKET: .005 IN. THK EA 1

00254 (11568) SE14-30A


00255 (11568) SE14-30B


00256 (11568) SE14-30C

X1 4310-585-9950 GASKET: 03125 IN. THK EA 1

00257 (11568) SE-14-30

X20 4310-884-4582 GUIDE, SPRING EA 1 7 44

00258 (11568) SE5-87

X20 HOUSING, GOVERNOR EA 1 7 32

00259 (11568) NR80A

X20 NIPPLE, PIPE: TANK TO CHECK VALVE, 1/2 IN. NPT, A EA 1

00260 3 IN. LG

(11568) M1057B

X20 NIPPLE, PIPE: TANK TO CHECK VALVE, 1/2 IN. NPT, B EA 1

00261 4 IN. LG

(11568) M1030B

X20 PIN, SPRING EA 2 7 6

00262 (11568) SE5-92A

X20 PLATE, BAFFLE EA 1 7 35

00263 (11568) NR104

0 5305-710-4190 SCREW, CAP, HEXAGON HEAD: 7/16-20 THD SIZE, 1 IN. LG EA 1 7 47

00264 (96906) MS35296-85

41

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







0 5305-269-3211 SCREW, CAP, HEXAGON HEAD: GOVERNOR HOUSING MTG, EA 4 7 33

00265 3/8-16 THD SIZE, 1 IN. LG

0 5305-263-9874 SCREW, MACHINE: GOVERNOR HOUSING COVER MTG, EA 6 7 1

00266 NO. 10-32 THD SIZE, 5/8 IN. LG

(11568) SE14-84

X20 2990-863-0926 SPINDLE, GOVERNOR EA 1 7 49

00267 (11568) SE5-83B


00268 (11568) SE5-90

X20 4310-896-2104 SPRING, HELICAL, COMPRESSION: BUMPER EA 2 7 43

00269 (11568) H110P

X20 TUBE, ACTUATING EA 1 6 13

00270 (11568) M801


00271


00272 (11568) M545


00273 (11568) M546

X20 TUBE, MANIFOLD EA 1 6 8

00274 (11568) M705

X20 ELBOW, COMPRESSION: 90 DEGREE EA 1

00275 (11568) M499

X20 4730-277-8837 ELBOW, PIPE TO TUBE: MANIFOLD TUBE EA 1 6 17

00276


00277 (11568) M545

0 4730-142-1593 NUT, COMPRESSION: MANIFOLD TUBE EA 2 6 10

00278

0 SLEEVE, COMPRESSION: MANIFOLD TUBE EA 2 6 11

00279 (11568) M546

42

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X20 TEE, BRANCH: MANIFOLD TUBE EA 1 6 12

00280 (11568) M535

X20 TUBE, SENSING A EA 1 6 26

00281 (11568) M858

X20 TUBE, SENSING B EA 1 6 26

00282 (11568) M848

X20 BODY, COMPRESSION: 1/4 X 1/4 EA 1

00283 (11568) M441

X20 ELBOW, COMPRESSION: 90 DEG, 1/4 X 1/4 EA 1

00284 (11568) M499

X20 NUT, COMPRESSION: 1/4 IN. EA 2

00285 (11568) M545

X20 SLEEVE, COMPRESSION: 1/4 IN. EA 2

00286 (11568) M546

X20 TUBE, SLOWDOWN EA 1 6 30

00287 (11568) M849


00286 (11568) M545


00289 (11568) M546

X20 TEE: MALE BRANCH, 1/4 X 1/4 X 18 EA 1 6 12

00290 (11568) M535

X20 4310-961-5554 TUBING, RELIEF VALVE EA 1 6 1

00291 (11568) SB250A

X20 ELBOW, PIPE TO TUBE: 90 DEG, 1/4 X 1/8 NPT EA 2 6 3

00292 (11568) Z513


00293


00294

43

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X20 VALVE ASSEMBLY, CHECK B EA 1 6 40

00295 (11568) ZR44

(COMPONENTS SAME AS VALVE ASSEMBLY, STOCK NO. (11568)

Z544, EXCEPT WHERE INDIVIDUAL ITEMS ARE ANNOTATED)

X20 VALVE ASSEMBLY, CHECK A EA 1 6 40

00296 (11568) Z544

X20 BODY, VALVE B EA 1 9 1

00297 (11568) R10-44B


ZR44, ONLY)

X20 BODY, VALVE A EA 1 9 1

00298 (11568) R10-44D


Z544, ONLY)

X1 5330-584-9010 GASKET EA 1 9 2

00299 (11568) RE10-66

X1 PACKING, PREFORMED EA 1 9 4

00300 (11568) OR218

X1 PLUG EA 1 9 5

00301 (11568) M806

P O 4310-654-3590 VALVE ASSEMBLY, AIR EA 1 * * 2 * * 2 6 20 9 3

00302 (11568) Z114

P O 4310-858-8107 VALVE ASSEMBLY, INTERSTAGE SAFETY EA 1 * * 2 * * 2 10 10 6 9

00303 (75336) 128

P O 4820-909-6585 VALVE ASSEMBLY, PILOT EA 1 * * 2 * * 2 6 10 6 29

00304 (75336) 75110F1G751

X1 BARREL, ADJUSTING EA 1

00305 (75336) 750103

X1 BASE EA 1

00306 (75336) 750W101

X1 BODY EA 1

00307 (75336) 751102

44

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X1 GUIDE, SPRING EA 1

00308 (75336) 750108

X1 LOCKNUT EA 1

00309 (75336) KC565-2-12

X1 LOCKNUT EA 1

00310 (75336) 750104

X1 PACKING, PREFORMED EA 1

00311 (75336) KC600-1-7

X1 PACKING, PREFORMED: VALVE EA 1

00312 (75336) KC601-1-4Q

X1 PACKING, PREFORMED: VALVE SEAT EA 1

00313 (75336) KC601-1-5Q

X1 RIVET, VALVE EA 1

00314 (75336) 750104B

X1 SCREW, ADJUSTING EA 1 6 28

00315 (75336) 750105

X1 SPRING EA 1

00316 (75336) KC780-118

X1 VALVE EA 1

00317 (75336) 750104A

X1 WASHER, SEAT EA 1

00318 (75336) 750109

P O 4310-013-7320 VALVE ASSEMBLY, RELIEF EA 1 * * 2 * * 2 6 6

00319 (11568) Z124-14A

X1 3110-198-1050 BALL, BEARING: RELEASE VALVE EA 1 7 41

00320 (11568) SE5-95

X1 BODY, RELEASE EA 1 7 39

00321 (11568) NR101

X1 4310-625-6747 PLUNGER, RELEASE VALVE EA 1 7 42

00322 (11568) SE5-86B


00323 (11568) SE5-91

45

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







P O 4820-844-8636 VALVE, RELEASE SAFETY EA 1 * * 2 * * 2 10 10 3 1

00324 (75336) 112

0 5310-018-7076 WASHER FLAT: 3/8 IN. SCREW SIZE EA 1 7 46

00325

0 5310-012-1753 WASHER, LOCK: BRACKET MTG, 1/4 IN. SCREW SIZE EA 1

00326 (96906) MS35335-19

0 5310-010-3322 WASHER, LOCK: SPRING, 7/16 IN. SCREW SIZE EA 1 7 48

00327 (96906) MS35338-9

X20 4310-896-2105 WEIGHT, GOVERNOR EA 2 7 5

00328 (11568) SE5-82

00329 5010 - COMPRESSOR COOLING

X20 HEAD UNLOADER ASSEMBLY, HIGH PRESSURE EA 1 6 7

00330 (11568) Z546

X20 CLAW: HIGH PRESSURE EA 1 10 8

00331 (11568) N1-15-13


00332 (11568) N1-15-6

X20 4310-065-0339 GASKET EA 1 10 3

00333 (11568) NRS34

X20 MANIFOLD, INTAKE, HIGH PRESSURE EA 1 10 7

00334 (11568) NE15-2A


00335 (11568) M151

P O 4310-065-0338 PACKING, PREFORMED EA 1

00336 (11568) 0R111

(INITIALLY SHOWN AS INDEX NO. 00215)

X1 PISTON EA 1 10 4

00337 (11568) N1-15-4


00338 (11568) N1-15-3

46

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)








00339 (11568) TD8

X20 4730-277-9741 FERRULE, TUBE EA 4 6 14

00340 (11568) SE5-42

0 4730-850-7971 INVERTED NUT, TUBE COUPLING EA 4 6 15

00341 (11568) SE5-41

X20 MANIFOLD, LOW PRESSURE, EXHAUST EA 1 6 44

00342 (11568) RE10-2E

X20 MANIFOLD, HIGH PRESSURE, EXHAUST EA 1 6 5

00343 (11568) NR2B

0 5305-637-4042 SCREW, CAP, HEXAGON HEAD: MANIFOLD MTG, EA 2 6 4

00344 3/8-16 THD SIZE, 1 3/4 IN. LG

(96906) MS35291-65

X20 TUBE, AFTERCOOLER EA 1 6 41

00345 (73540) C1286

X20 4310-977-8670 TUBE, INTERCOOLER EA 1 6 16

00346 (11568) RE4-12A

00347 5014 - AIR RECEIVER

X20 4730-228-9930 BODY: 1/4 X 1/4 B EA 1

00348 (11568) M44:

0 5306-638-1459 BOLT, MACHINE, HEXAGON HEAD: TANK MTG, EA 4 4 19

00349 5/16-18 THD SIZE, 3/4 IN. LG

(11568) M567

X20 4310-874-3181 COCK, DRAIN: RECEIVER TANK EA 1 3 7

00350 (92976) 1825A

0 ELBOW, PIPE, STREET: TANK TO CHECK VALVE B EA 1

00351 (11568) M989B

0 5310-012-0376 NUT, PLAIN, HEXAGON: TANK MTG, 5/16-18 THD SIZE B EA 4 4 15

00352 (11568) M935A

X20 RECEIVER, AIR A EA 1 3 2

00353 (11568) P2924D

47

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X20 PLUG, PIPE: INSPECTION HOLE, 2 IN. NPT A EA 2 3 10

00354 (11568) M569

X20 RECEIVER, AIR B EA 1 4 2

00355 (11568) P2221G42

X20 PLUG, PIPE: TANK INSPECTION, 1 1/2 IN. NPT B EA 2 4 18

00356 (11568) M1001

0 5310-013-8485 WASHER, LOCK: TANK MTG, 5/16 IN. SCREW SIZE B EA 4 4 16

00357 (11568) M911A

00358 5015 - AIR DISCHARGE SYSTEM

X20 NIPPLE, PIPE: CLOSE, GLOBE VALVE MTG, 1/4 IN. NPT B EA 1 4 3

00359 (11568) M1015B

X20 NIPPLE, PIPE: CLOSE, GLOBE VALVE MTG, 1/2 IN. NPT A EA 1 3 6

00360 (11568) M1027B

X20 VALVE ASSEMBLY, GLOBE: RECEIVER TANK OUTLET, A EA 1 3 3

00361 1/2 IN. NPT

(86107) 592-14

X1 BODY A EA 1

00362 (86107) 4752-712

X1 BONNET A EA 1

00363 (86107) 4490

X1 HANDLE A EA 1

00364 (86107) 588

X20 NUT, BONNET A EA 1

00365 (86107) 4431

X20 PACKING A EA 1

00366 (86107) 811

X20 SCREW A EA 1

00367 (86107) 107S

X20 SCREW, SEAT A EA 1

00368 (86107) 105

48

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)







X1 STEW A EA 1

00369 (86107) 4491

X20 WASHER, ASBESTOS A EA 1

00370 (86107) 402E

X20 WASHER, SEAT A EA 1

00371 (86107) 917

X20 VALVE ASSEMBLY, GLOBE: OUTLET, RECEIVER TANK, B EA 1 4 4

00372 1/4 IN. NPT

(86107) N3685

X1 BODY B EA 1

00373 (86107) 5-4701

X1 HANDLE B EA 1

00374 (86107) M2449

X1 NUT, PACKING B EA 1

00375 (86107) C1428

X1 PACKING B EA 1

00376 (86107) D1615

X1 SCREW B EA 1

00377 (86107) B1200

X1 STEM B EA 1

00378 (86107) G2235

X1 WASHER, SEAT B EA 1

00379 (86107) D1620

49

Figure No. 2 Fuel Tank And Related Parts

5 1

52

Figure No. 3 Air Receiver Tank And Related Parts (Model HGR-8M-1)

12

13

10

11

14

7

8

9

6

5

4

4

1

2

ITEM FUNCT

NO.

GROUP

3

5009

5009

5009

5010

5008

5010

5005

5010

5009

5009

5009

5009

5009

5009

5010

ITEM

NAME

TUBE

NUT

ELBOW

SCREW

SCREW

MANIFOLO

VALVE AY

HEAD UN LOADER

TUBE

VALVE AY

NUT

SLEEVE

TEE

TUBE

FERRULE

5007

5007

5007

5007

FUNCT

GROUP

5007

5007

5007

5007

5007

5007

4

5

6

2

3

1

ITEM

NO.

9

10

7

8

LEGEND TO PARTS, FIGURE 5

ITEM

NAME

ITEM

NO.

SHIELD

BELT

11

12

BRACKET

NUT

WASHER

13

14

15

WASHER

16

SHELL

BRACKET

17

18

NUT

BRACKET

19

20

FUNCT

GROUP

5007

5007

5007

0102

0102

0102

0102

0102

0102

0102

ITEM

NAME

WASHER

WASHER

SCREW

SCREW

WASHER

BUSHING

PULLEY

STUB SHAFT

WASHER

SCREW

24

25

26

27

28

29

19

20

21

22

23

15

16

17


ITEM FUNCT

NO.

GROUP

ITEM

NAME

5010

5010

INVERTED NUT

TUBE

18

5009

5008

ELBOW

5005

5006

5006

5006

5008

HEAD UNLOADER

VALVE AY

TUBE

NUT

ADAPTER

SETSCREW

5008

5001

5009

5009

5009

5009

MUFFLER AY

SCREW

TUBE

BRACKET

SCREW

VALVE AY

32

33

34

35

36

37

38

39

42

43

40

41

44

ITEM

NO.

30

31

FUNCT

GROUP

5009

5009

5001

5009

5010

5005

5005

5010

5009

5009

0312

0312

0312

5009

5001

ITEM

NAME

TUBE

NUT

COCK

CYLINDER AY

NUT

SCREW

ARM

BRACKET

GASKET

CYLINDER

VALVE AY

TUBE

VALVE AY

VALVE AY

MANIFOLD

5 5

5 6

Figure No. 6 Manifolds, Valves, Tubes And Fittings

5

4

3

2

9

8

10

11

14

15

16

!7

18

19

ITEM

NO.

FUNCT

GROUP

5004

5004

5004

5004

5007

5007

5007

5007

5002

5004

5009

5009

5009

5009

5009

5009

5004

5004

5004

ITEM

NAME

SCREW

NUT

ELBOW

COVER

WEIGHT

PIN

BUSHING

RING

PISTON

RING SET

PIN

RING SET

PISTON

BOLT

FLYWHEEL

NuT

KEY

SEAL

ROD

Figure No. 7 Compressor Crankcase


31

32

33

34

27

28

29

30

35

36

37

38

ITEM FUNCT

NO.

GROUP

20

21

22

24

25

5002

5002

5002

5009

5009

5009

5009

5009

5006

5004

5004

5001

5001

5001

5006

5006

5009

5009

5009

ITEM

NAME

PLUG

DIPPER

BOLT

CASKET

PLATE

BOLT

NIPPLE

CAP

(RANK SHAFT

CONE-ROLLER

CUP

GASKET SET

HOUSING

SCREW

GASKET

PLATE

BODY

SCREEN

FELT

ITEM FUNCT

NO.

GROUP

5009

5009

5009

5001

5006

5001

5009

5009

5009

5009

5009

5009

5009

5009

5009

5009

5000

5000

5000

53

54

55

56

57

49

50

51

52

43

44

45

46

39

40

41

42

47

48

ITEM

NAME

BODY

SPRING

BALL

PLUNGER

SPIRNG

GUIDE

SPRING

WASHER

WASHER

WASHER

SPINDLE

CRANKCASE

PLUG

WINDOW

ADAPTER

NUT

SCREW

WASHER

NUT

5 7

58

3

2

Figure No. 8 Intake Manifold

LEGEND TO PARTS, FIGURE 8

1

ITEM FUNCT lTEM

NO.

GROUP NAME

5008 NUT 5

ITEM FUNCT

NO.

GROUP

ITEM

NAME

5008 SCREEN

5008 COVER

5008

PLATE

7

6

5008

COVER

5008 SCREW

4 5008 ELEMENT

Figure No. 9 Check Valve

59

60

Figure No.

10 Unloader Head, High And Low Pressure

Figure No. 11 Compressor Valves

61

MS35338-9

MS35690-505

MS35690-605

MS35690-805

MS39176-5

MS51086-1

MS90725-8

MS9786E

M1001

M1015B

M1027B

M1030B

M1046

M1052A

M1053A

M1054A

M1055A

M1056A

M1057B

M1058A

M1062A

M151

M504

M509

M513

M535

M540

M545

M30

M31A

M3413

M441

M458

M460

M461

M499

SECTION VII.

REFERENCE NO.

AN340C10

AN515C10-88

A555

B1200

B5093

CD297

C1286

C1428

C1439

DD

D1615

D1620

G2235

H110P

H2449

J2807

KC565-2-12

KC600-1-7

KC601-1-4Q

KC601-1-5Q

KC780-118

MS35291-58

MS35291-65

MS35292-87

MS35295-34

MS35296-85

MS35297-6

MS35335-19

MS35335-7

INDEX-FEDERAL STOCK NUMBER AND REFERENCE NUMBER

CROSS-REFERENCE TO INDEX NUMBER

MFG CODE

88044

88044

79470

86107

70925

81118

73540

86107

72219

53477

86107

86107

86107

11568

86107

72219

75336

75336

75336

75336

75336

96906

96906

96906

96906

96906

96906

96906

96906

96906

96906

96906

96906

96906

96906

96906

96906

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

72219

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

INDEX NO.

00184

00240

00250

00280

00290

00224

00272

00277

00285

00085

00283

00348

00013

00183

00182

00275

00284

REFERENCE NO.

M545

M546

M567

M569

M640

M673

M674

M703

M705

M708

M709

M710

M721

M722

M723

M724

M918A

M924A

M925A

M935A

M936A

M939A

M947B

M97A

M979B

M98A

M989B

ND1252

NE15-2A

NRS34

NR101

NR104

NR14-6A

NR15A

NR2B

NR29A

NR31B

NR7A

NR80A

NR9A

N1-15-13

N1-15-3

M841

M842

M843

M846

M847

M848

M849

M850

M851

M852

M853

M858

M911A

M774

M777

M778

M779

M801

M806

M807

M811

M835

M725

M756

M757

M758

M759

M761

M773

00260

00097

00245

00043

00214

00335

00220

00221

00359

00360

00261

00234

00035

00098

00091

00099

00100

00056

00108

00203

00188

00032

00014

00018

00356

00326

00154

00163

00172

00180

00327

00066

00202

00344

00121

00004

00264

00044

00050

00016

00046

00052

00089

00309

00311

00312

00313

00316

00204

00227

00223

00226

00238

00377

00117

00028

00345

00375

00088

00086

00376

00379

00378

00269

00374

N1-15-4

N1-15-6

N1-21-13

MFG CODE

11568

11568

INDEX NO.

00235

00031

00236

00351

00029

00334

00333

00321

00010

00357

00037

00014

00036

00352

00008

00049

00237

00199

00282

00287

00022

00093

00094

00106

00281

00301

00232

00095

00096

00021

00193

00194

00067

00114

00331

00217

00338

00216

00337

00212

00332

00211

00263

00119

00116

00343

00120

00115

00196

00259

00040

00045

00041

00024

00023

00059

00057

00058

00270

00012

00013

00231

00006

00230

00015

00071

00055

00288

00273

00279

00286

00289

00349

00354

00051

00222

00225

00034

00274

00244

00247

00248

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

81118

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

62

SECTION VII.

REFERENCE NO.

N3685

OR11

OR111

SE14-30B

SE14-30C

SE14-84

SE14-89

SE5-41

SE5-42

SE5-8

SE5-82

SE5-83B

SE5-86B

SE5-87

SE5-90

SE5-91

SE5-92A

SE5-95

TD8

R10-102

R10-20

R10-21

R10-37

R10-4

R10-44B

R10-44D

R10HUB2

R15-24

R15-3

R15-4

R15-5

R15HU

SB250A

SE14-30

SE14-30A

OB375

ZNR16

ZR44

Z102G

Z113

Z114

Z115

Z117

Z118

Z124-14A

Z130

Z179C

Z189B

Z218B

Z266

Z271-1

Z271-3

Z282

Z329

OR12

OR218

P2221G42

P2924D

RE10-100A

RE10-2E

RE10-51A

RE10-59

RE10-61

RE10-62

RE10-65A

RE10-66

RE14-58

RE14-70

RE14-71

RE14-72

RE14-75A

RE4-105

RE4-12A

RE7-52A

RE7-53A

RE7-57A

RE7-60


CROSS-REFERENCE TO INDEX NUMBER

MFG CODE INDEX NO.

REFERENCE NO. MFG CODE

86107

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

11568

00262

00320

00218

00339

00186

00124

00295

00140

00340

00200

00328

00267

00322

00258

00268

00323

00107

00291

00257

00254

00255

00256

00266

00252

00341

00133

00297

00298

00213

00131

00138

00134

00123

00164

00302

00146

00155

00173

00319

00253

00137

00136

00073

00243

00198

00195

00042

00118

00167

00149

00151

00152

00170

00135

00129

00132

00130

00299

00178

00179

00177

00175

00174

00192

00346

00372

00007

00246

00215

00336

00092

00300

00355

00353

00242

00342

00158

00161

00162

00153

00171

001960

Z330

Z509

Z513

Z538A

Z539

Z540

Z543

Z544

Z545

Z546

Z60A

Z66A

102705

105

107S

112

11613

128

1413843

14276

1506

1507

1508

1509

1825A

20-1000-02LXPS

212112DSTYLE1

2165

2185

2237

2325

4A032-11

4L710-2

402E

4298

4431

4490

4491

4752-712

5-4701

5004

506

506-32

588

592-14

6IFI-715

6362

729

750W101

750103

750104

750104A

750104B

750105

750108

750109

751100F1G751

751102

811

917

79150

79150

79150

81336

25472

86107

79150

8607

86107

94894

53477

94894

75336

75336

75336

86107

86107

86107

86107

86107

94894

94894

94894

75336

75336

75336

75336

75336

75336

75336

86107

86107

11568

11568

11568

11568

24617

86107

86107

75336

78394

75336

60038

11568

11568

11568

11568

11568

11568

11568

11568

60038

94894

94894

94894

94894

92976

94894

80201

79150

INDEX NO.

00317

00314

00315

00308

00318

00304

00307

00366

00371

00364

00361

00075

00084

00079

00306

00305

00310

00157

00365

00363

00369

00362

00373

00080

00078

00077

00166

00143

00156

00141

00005

00191

00370

00143

00081

00350

00103

00127

00144

00148

00165

00145

00147

00324

00087

00303

00125

00126

00076

00074

00082

00296

00210

00330

00233

00219

00228

00368

00367

00112

00187

00239

00249

00292

00083

00065

0027

00197

63

SECTION VII.

STOCK NUMBER

2805-068-7512

2805-690-8860

2805-690-8866

2910-496-4949

2910-678-9133

2910-905-9792

2930-014-6993

2990-142-0080

2990-863-0926

2990-903-3864

3030-854-7351

3110-100-0516

3110-100-3150

3110-198-1050

4310-013-7320

4310-065-0338

4310-065-0339

4310-585-4283

4310-585-9950

4310-610-4373

4310-616-4372

4310-616-4374

4310-619-0215

4310-625-6747

4310-625-6752

4310-625-6753

4310-625-6757

4310-625-6759

4310-625-6760

4310-625-6762

4310-631-3396

4310-631-3397

4310-631-3398

4310-631-3399

4310-633-6114

4310-649-8389

4310-654-3590

4310-773-7986

4310-811-6046

4310-850-5541

4310-858-8107

4310-874-3179

4310-874-3181

4310-875-4107

4310-884-4582

4310-896-2104

4310-896-2105

4310-896-5984

4310-922-1911

4310-927-5652

4310-961-5554

4310-977-8670

4310-993-4188

4730-142-1593

4730-187-4200

4730-192-9513

4730-228-1619

4730-228-9930

4730-263-3124

4730-273-8561

4730-277-8837

4730-277-9741

4730-287-1537

4730-595-1721

4730-850-7971

4820-391-3782

4820-844-8636

4820-909-6585

4910-030-2365

4910-806-8185

5305-010-2705

5305-012-2119

64


CROSS REFERENCE TO INDEX NUMBER

INDEX NUMBER STOCK NUMBER INDEX NUMBER

00293

00025

00183

00182

00348

00185

00139

00240

00233

00243

00253

00291

00346

00220

00251

00271

00278

00268

00303

00083

00350

00140

00258

00269

00328

00164

00155

00173

00254

00136

00302

00137

00130

00250

00276

00294

00340

00188

00241

00084

00341

00238

00324

00304

00073

00078

00228

00204

00161

00322

00151

00149

00160

00158

00177

00175

00146

00336

00333

00252

00257

00323

00152

00170

00178

00267

00042

00191

00126

00125

00320

00319

00215

00005

00092

00007

00246

00028

00029

00032

00012

00018

5305-068-0502

5305-225-3839

5305-263-9874

5305-269-3211

5305-269-3213

5305-637-4042

5305-710-4190

5305-710-4192

5305-952-0760

5306-225-8499

5306-638-1459

5310-010-3322

5310-010-6497

5310-012-0376

5310-012-1753

5310-013-8485

5310-018-7076

5310-044-6548

5310-176-8097

5310-186-7448

5310-209-0110

5310-5414-6674

5310-543-5180

5310-584-5005

5310-596-7373

5310-625-6755

5310-625-6758

5310-625-6761

5310-732-0588

5310-768-0318

5310-880-7744

5330-252-6639

5330-584-8999

5330-584-9010

5330-5684-9011

5330-599-5888

5330-724-0793

6680-377-4915

6685-264-3961

6685-910-8359

00299

00142

00157

00145

00147

00166

00127

00117

00103

00076

00108

00203

00066

00202

00156

00141

00144

00148

00165

00026

00049

00201

00153

00171

00162

00179

00056

00110

00207

00009

00206

00010

00016

00068

00208

00016

00046

00052

00326

00357

00325

00205

00223

00061

00064

00349

00327

00154

00163

00172

00180

00352

00264

00121

00150

00159

00168

00176

00004

00013

00044

00050

00014

00266

00265

00060

00109

00227

00344

TM 5-4310-277-25P

By Order of the Secretary of the Army:

W. C. WESTMORELAND,

General, United States Army,

Chief of Staff.

Official:

KENNETH G. WICKHAM,

Major General, United States Army,

The Adjutant General.

Distribution:

To be distributed in accordance with DA Form 12-25, Section I, (qty rqr block no. 18) organizational

maintenance requirements for air Compressors 15 CFM.

* U.S. GOVERNMENT PRINTING OFFICE : 1989 0 - 242-466 (3781)

PIN : 026815-004

This fine document...

Was brought to you by me:

Liberated Manuals -- free army and government manuals

Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap “watermarks” and other junk on it, and sell it.

Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it...

They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends?

I am setting this document FREE. This document was made by the US

Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on.

I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines:

<A HREF= http://www.liberatedmanuals.com/ >Free Military and Government Manuals</A>

–

Sincerely

–

Igor Chudov http://igor.chudov.com/

Chicago Machinery Movers

TM-5-4310-277-25P

DEPARTMENT OF THE ARMY TECHNICAL MANUAL

ORGANIZATIONAL, DIRECT AND GENERAL SUPPORT,

AND DEPOT MAINTENANCE REPAIR PARTS

AND SPECIAL TOOLS LIST

COMPRESSOR, RECIPROCATING, AIR, 15 CFM, 175

PSI, TANK MOUNTED, GED. (CHAMPION PNEUMATIC

MODEL HGR5-8M-1) FSN 4310-880-0186

COMPRESSOR, RECIPROCATING, AIR, 15 CFM, 175

PSI, TRAILER MOUNTED, GED. (CHAMPION

PNEUMATIC MODEL BGR-5M-1) FSN 4310-852-1745

This copy is a reprint which includes current pages from Changes 1 through 4

SECTION I

INTRODUCTION

This fine document...

Was brought to you by me:

Liberated Manuals -- free army and government manuals

Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap “watermarks” and other junk on it, and sell it.

Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it...

They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends?

I am setting this document FREE. This document was made by the US

Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on.

I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines:

<A HREF= http://www.liberatedmanuals.com/ >Free Military and Government Manuals</A>

–

Sincerely

–

Igor Chudov http://igor.chudov.com/

Chicago Machinery Movers

Related manuals

Everbilt

BPGH4WHD6

SportsArt

5009U

TK Classics

3DS30-123-KIT

LG

KC780