Chery QQ6 Service manual

Foreword
ADVICE
This Service Manual clearly defines the agreement between CHERY Automobile Co., Ltd. and
its customers on the product quality assurance, and the establishment and termination of rights
and bligations on after-sales service. Please carefully read this Service Manual before using the
parts manufactured by the CHERY Company.
Sevice Munual for CHERY QQ6
You are sincerely congratulated to be an owner of CHERY QQ6! Thank you for your belief for Chery Automobile Co., Ltd and your choice
for Chery products!
You will receive the high quality services from Chery Authorized Sales and Service Station whose employees have been trained well and
specially.
State-of-art technology offers CHERY QQ6 the excellent performance. Selecting CHERY QQ6 shows that you have very high
requireements on the performance and style of a vehicle.
Prior to using this car, please carefully read this service manual because the information hereto enables you to know how to properly
manipulate and maintain this vehicle, and get the maximum enjoyable driving experience.
This Service Manual is applied to the CHERY QQ6 only.
Chery Automobile Co., LTD
1
Foreword
This manualis compiled in accordance
with the structural features of QQ6
manufactured by CHERY Automobile Co.,
Ltd.. This manual is applied to the QQ6.
This manual covers the latest information
until it is printed. Chery Automobile Co.,
Ltd. is fully responsible for the revision
and explanation of this manual and
reserves the right of changing products
without further notice. Some pictures in
the manual are the schemes only for
references, and in the case of
unconformity between objects and
pictures, the objects will dominate.
This manual is the principal evidence, on
which you can get the automobile quality
guarantee and it should be placed in your
vehicle so that it is available whenever it is
needed. In the event that you want to sell
your vehicle, please hand over the manual
and complete set of documents together
with the vehicle to the new owner so that
the new owner for their use at necessary
moment.
Important Declaration
Before operating the products, please
carefully read the Manual, which your
rights for enjoy services of warranty from
our corporation are lost due to the
violation of the operational provisions.
CHERY Autombile Co., Ltd (hereinafter
refer to as ―the Company‖ or ―CHERY
Company‖) has established the technical
maintenance specifications of different
phases and the running-in of new vehicle,
including the maintenance on initial 5,000
km. The maintenance an care specified
above are crucial for your vehicle safety
and maintaining fine running conditions,
so please abide by without violation.
In the event that your vehicle or its parts
fail in the function due to misuse,
negligence, improper operation, and
maintenance that not in line with the
prescribed interval of mileage/running
hour, or signing the name or sealing on the
maintenance evidence as required, or
refitting /adding equipment on the vehicle
without approval, you will lose the right of
claiming, and any direct or indirect
application for services of warranty will be
refused by the Chery authorized sales and
service station.
In case that abnormality occurs to your
vehicle during the operation, it must be
overhauled and maintained by the Chery
authorized sales and service station, and
during the overhauling and maintenance
the Chery authorized sales and service
station has the right to decide whether to
maintain the vehicle through the method
of repairing or replacing identical part or
component depending on condition of the
vehicle.
If you are confused during reading the
manual, Chery company and Chery
authorized sales and service station will
explain to you in detail, and at the same
time precious opinions are welcome from
our customers.
WISH YOU A HAPPY DRIVING!
The copyright of this manual belongs to
the CHERY Automobile Co., Ltd.
2
Content
Chapter 1 Brief Introduction错误!未定义书
签。
Safety and Environmental Protection ........... 错误!未定义书签。
Check of A New Vehicle .............................. 错误!未定义书签。
Run-in of A New Vehicle.............................. 错误!未定义书签。
Description of Common Symbols on Vehicle错误!未定义书签。
Instrumental Panel ........................................ 错误!未定义书签。
Warning Device ............................................ 错误!未定义书签。
Instruments ................................................... 错误!未定义书签。
Audio............................................................ 错误!未定义书签。
Panel Description ......................................... 错误!未定义书签。
Performance ................................................. 错误!未定义书签。
Know-How Before Use ................................ 错误!未定义书签。
Operating Method ........................................ 错误!未定义书签。
Operating Method of Accessaries ................. 错误!未定义书签。
Troubleshooting ........................................... 错误!未定义书签。
Error Display ................................................ 错误!未定义书签。
Specifications ............................................... 错误!未定义书签。
Audio System Refit ...................................... 错误!未定义书签。
A/C System .................................................. 错误!未定义书签。
Ventilation .................................................... 错误!未定义书签。
Electronic Control Automatic A/C System ... 错误!未定义书签。
Troubleshooting ........................................... 错误!未定义书签。
Rear Windscree Defroster/Exterior Rear-View Mirror Heater 错误!
未定义书签。
Light Control ................................................ 错误!未定义书签。
Headlamp Switch ......................................... 错误!未定义书签。
Headlamp Dimmer ....................................... 错误!未定义书签。
Headlamp Flasher ......................................... 错误!未定义书签。
Front / Rear Fog Lamp Switch ..................... 错误!未定义书签。
Turn Signal Lamp ......................................... 错误!未定义书签。
Lane Change Singal Light ............................ 错误!未定义书签。
Instrument Light Dimmer ............................. 错误!未定义书签。
Interior Front Ceiling Light .......................... 错误!未定义书签。
Interior Rear Ceiling Light ........................... 错误!未定义书签。
Luggage Compartment Light ....................... 错误!未定义书签。
Sun Visor & Cosmetic Mirror Light ............. 错误!未定义书签。
Front Doorsill & Key Hole Lights ................ 错误!未定义书签。
Hazard Flasher Indicator Switch .................. 错误!未定义书签。
Operation & Adjustment of Interior Devices 错误!未定义书签。
Steering Wheel Lock & Ignition Switch....... 错误!未定义书签。
Adjust the Steering Wheel ............................ 错误!未定义书签。
Horn ............................................................. 错误!未定义书签。
Windscreen Wiper and Washer System ........ 错误!未定义书签。
Interior Rear-View Mirror ............................ 错误!未定义书签。
Sun Visor ...................................................... 错误!未定义书签。
Control Switches On Doors .......................... 错误!未定义书签。
Switches on the Central Console .................. 错误!未定义书签。
Rear Cup Holder........................................... 错误!未定义书签。
3
Content
External Power Interface .............................. 错误!未定义书签。
Door Lock and Theft Prevention .................. 错误!未定义书签。
Vehicle Keys ................................................ 错误!未定义书签。
Centrol Door Lock System ........................... 错误!未定义书签。
Rear Door Child Lock .................................. 错误!未定义书签。
Luggage Compartment Door Open .............. 错误!未定义书签。
Filler Cap Release Rod ................................. 错误!未定义书签。
Engine Hood Open ....................................... 错误!未定义书签。
Wireless Remote Control System with Anti-theft Function ( ) 错
误!未定义书签。
Seat and Safety Protection ............................ 错误!未定义书签。
Seat............................................................... 错误!未定义书签。
Seat Belt ....................................................... 错误!未定义书签。
Airbag .......................................................... 错误!未定义书签。
Child Safety Seat .......................................... 错误!未定义书签。
Driving ......................................................... 错误!未定义书签。
Starting ......................................................... 错误!未定义书签。
Caution the Vehicle’s Exhaust Fume ............ 错误!未定义书签。
Engine Control Unit Selfadapting Function . 错误!未定义书签。
Engine Speed Limiter ................................... 错误!未定义书签。
Engine Shutdown ......................................... 错误!未定义书签。
Brake ............................................................ 错误!未定义书签。
Steering ........................................................ 错误!未定义书签。
A/T Transmission Operation ( ) ............... 错误!未定义书签。
Wading ......................................................... 错误!未定义书签。
Three-way Catalytic Converter .................... 错误!未定义书签。
Parking ......................................................... 错误!未定义书签。
Fuel Consumption ........................................ 错误!未定义书签。
Radiator Fan ................................................. 错误!未定义书签。
Emergency Assistance .................................. 错误!未定义书签。
Hazard warning flasher ................................ 错误!未定义书签。
Refuel in time ............................................... 错误!未定义书签。
Bulb Replacement ........................................ 错误!未定义书签。
Fuse and Relay ............................................. 错误!未定义书签。
Tire Replacement ......................................... 错误!未定义书签。
Battery .......................................................... 错误!未定义书签。
Engine’s battery-assisted start method.......... 错误!未定义书签。
Breakdown trailer ......................................... 错误!未定义书签。
Maitenance and Care .................................... 错误!未定义书签。
Items you must follow .................................. 错误!未定义书签。
Maintenance Items of the Engine Compartment错误!未定义书签。
Tire ............................................................... 错误!未定义书签。
Train Belts .................................................... 错误!未定义书签。
Vehicle washing ........................................... 错误!未定义书签。
Maintenance ................................................. 错误!未定义书签。
Regular Maintenance Specifications ............ 错误!未定义书签。
First 5,000 KM Maintenance Card ............... 错误!未定义书签。
Maintenance Record ..................................... 错误!未定义书签。
Warranty Service .......................................... 错误!未定义书签。
4
Content
Capacity and Specification Parameters 错误!未定义书签。
Vehicle Identification Direction ................... 错误!未定义书签。
Fuel .............................................................. 错误!未定义书签。
Ening Oil ...................................................... 错误!未定义书签。
Automobile oil/fluid ..................................... 错误!未定义书签。
Vehicle ........................................................ 错误!未定义书签。
Wheel and Tire ............................................. 错误!未定义书签。
Engine Data .................................................. 错误!未定义书签。
Train Belts .................................................... 错误!未定义书签。
Vehicle Dimension ....................................... 错误!未定义书签。
Vehicle Parameters ....................................... 错误!未定义书签。
Emergency Maintenace Guide...................... 错误!未定义书签。
Introductioni ................................................. 错误!未定义书签。
Full use of your CHERY Authorized Service Station错误!未定义
书签。
First aid ........................................................ 错误!未定义书签。
5
Brief Introduction
Chapter 1
Introduction
Brief
6
Brief Introduction
Prior to reading this
instruction manual, you
should learn about the
following:
Thank you for your purchasing a
Chery vehicle. To help you use your
car properly and ensure your benefit,
please take time to read this manual
carefully.
This
manual
contains
some
important information for daily
operation and normal maintenance.
It is designed to assist you to be
familiar with operation of your car.
Thorough familiarity with your
vehicle will provide you enhanced
security, lower cost and enjoyable
driving experience.
Any improper operation might cause
your vehicle damage, and you might
lose your right to claim.
series vehicles until printing this manual,
Regular maintenance will keep your
future or to certain market, hence, some
vehicle in good condition and play a
items in this manual may be inapplicable
significant role in maintaining and the
to your vehicle.
resale value of your vehicle. And many

skillful auto repair technicians from Chery
i.e., all of the standard and optional
installation for a A5 model. Some
equipment may be only supplied in the
Warning Symbols In
This Manual
Authorized Service Stations nationwide
can provide you high quality repair or
maintenance service. Chery Authorized
Service Stations are also the reliable
sources for providing genuine spare parts
from the original manufacturer.

SCOPE OF EQUIPMENT
This manual specifies the utmost scope of
would-be installed equipment for A5
When using a vehicle, how to
minimize the damage to vehicle and its
equipment as well as prevent from
passenger’s injury? In this manual, the
answers are contained in the explanations
marked with triangle warning symbol.
Please read it carefully and abide by
relating contents.
Equipment marked with asterisk
7
Brief Introduction
only are used for certain models, or only
above-mentioned information.
complete the purchase.
supplied for options for some kind of
models, or only supplied in certain market.
If you see this symbol in your
vehicle, prior to any operations,
you must read the relating chapters in this
manual.
Safety
and
environmental
protection
We
must
shoulder
our
obligatory responsibilities and obligations
Inspection of a New
Vehicle
use a vehicle and dispose wasted cleaning
articles as well as lubricants in accordance
with relating regulations so as to achieve
this goal. In this manual, arboraceous
symbol
is
used
to
highlight
the
Owing to machining and assembling
Prior to hand over the vehicle to you, the
errors, the frictional resistance between the
dealer of Chery Automobile has already
moving parts of a new vehicle will be
carried out inspection in accordance with
much larger than normal condition at the
the provision specified by Chery Company.
initial stage. The running-in effect of the
The dealer should fill in the date of vehicle
initial stage has considerable influences on
delivery in the ―Vehicle Delivery and
the vehicle’s service life, operational
Inspection Record‖, and stamp his official
reliability, and economy. So the using of a
seal of specific dealer.
new vehicle must strictly comply with
in the effort of environmental protection.
It is an important procedure to properly
Running-In of a New
Vehicle


The dealer will check the performance of
an entire car in accordance with ―Vehicle
Sales and Delivery Card of Chery
Automobile",
and
introduce
common
knowledge of using the vehicle, then the
sales clerk and user sign their names to
specifications on running-in.
Specification of
Within 1,000 Km:
Running

is
Full
speed
in
absolutely
impermissible;
8
Brief Introduction


In general, it shall not exceed 100km
the red indication area, it must switch into
necessary. Under such circumstance, when
/ h;
the adjacent high gear.
driving during the first 100 km, it ought to
Each gear shall avoid running at full
Unnecessary high speed of engine should
throttle.
be avoided. Change up as soon as possible
Specification of Running in
within the Range of 1,000 - 1,500
KM:

be relatively slow, and the driver should be
extraordinarily cautious.
is favorable for fuel saving, work noise
Running-in for the new friction lining of
decrease
brake is also quite necessary. When
as
well
as
environmental
pollution reduction.
It can gradually increase to the
However, engine speed should not be too
maximum speed or run at the
slow when cruise, only when the engine is
maximum allowable speed of the
overloaded should it is necessary to shift
engine.
down.
driving during the first 200 km, ideal
friction of the brake is not available. In
this phase, if the braking is comparatively
poor, the driver can conduct properly
larger pedal pressure. This action is also
applicable to the newly replaced brake
Attentions Should be Paid after
the Period of Running In:
When a vehicle is cold, no matter whether
certain gear, the engine should not work at
When driving a vehicle with speed meter,
friction lining.
it is on neutral position or driving on
maximum speed.
After 800 km of cruise, the wheel nut of a
new vehicle must be again screwed down
to specified torque. Refer to the chapter
the allowable maximum transient speed is
When manually shift the
When using a new tire, at the beginning it
"Specification Parameters" in this manual
gear, if the cursor of speedometer reaches
has no optimal adhesive force. Hence,
for proper torque value. Similarly, if a
6000 r/min.
running-in for first-life tire is also quite
9
Brief Introduction
wheel is replaced or a wheel nut has ever
when you purchase a car. If you have any
been loosened, after 800 km of cruise, the
problems during the process of driving,
wheel nut should be again screwed down
please contact your consultant, who will
according to specified torque value.
provide you with high quality services.

One-to-One Service
To provide better vehicle services as well
as application, a Chery vehicle dealer will
appoint one service consultant for you
10
Brief Introduction
Vehicle Delivery and Inspection Record:
This vehicle's delivery inspection has been
finished in accordance with the provision
specified by Chery Company Limited, and the
quality conforms to the technical specification
of Chery Company. And the certification is
presented herein.
Date of vehicle delivery:_________________
Registration
number:
Owner
_________________
Name(unit)
_________________
Address
_________________
Service Station
________________
_________________
_________________
Manager of the service station
________________
Seal of Dealer:
Telephone __________ Telephone ____________
11
Brief Introduction
Date of Vehicle Delivery:
Seal of dealer
Vehicle Model
Body VIN number
Engine No.
Transmission No
12
Brief Introduction
Vehicle Sales and Devlivery Card of CHERY
Performance of Complete Vehicle
Category
S/N
Item
Whether inspected and
clarified or not
1
Engine
Yes
□
No
□
2
Engine oil, brake fluid, steering fluid, coolant, electrolyte, windshield washer fluid
Yes
□
No
□
3
Identifications such as VIN number, engine number, nameplate, etc.
Yes
□
No
□
4
Locks and keys of the complete vehicle
Yes
□
No
□
5
Lighting system of the entire vehicle includes headlamp, directional signals, fog lamp,
combination light, interior light, stop lamp, reverse light, taillight, reading light, door lamp
and instrument light.
Yes
□
No
□
6
Windshield glass and body finish
Yes
□
No
□
7
Speedometer, tachometer, and odometer.
Yes
□
No
□
8
Wheel house, spare tyre in luggage boot, tool box and service manual for complete vehicle.
Yes
□
No
□
9
Seat belt, seat, cigarette lighter, A/C switch and duct, glove box and sun visor.
Yes
□
No
□
10
Window regulator, rearview mirror, wiper, washer, horn/speaker, radio (CD) and antenna
Yes
□
No
□
13
n
o
i
c
at
93# gasoline for fuel
li
p
1
p
A
f
o
s
e
n
Brief Introduction
Yes
□
No
No
□
14
Brief Introduction
2
Proper use in running-in period
Yes
□
No
□
3
Operation of complete set of vehicle lights
Yes
□
No
□
4
Meanings of warning light.
Yes
□
No
□
Yes
□
No
□
5
Proper maintenance time and mileage
6
Items of vehicle maintenance in winter/summer
Yes
□
No
□
7
Proper understanding on cooling system and use of coolant
Yes
□
No
□
8
Proper operation of air conditioner
Yes
□
No
□
9
Precautions while starting the vehicle
Yes
□
No
□
10
Proper operation of audio devices
Yes
□
No
□
Signature of seller:
Date:
Signature of owner:
Date:
15
Brief Introduction
“One-to-One” Consulting Service Card
Date of Purchase:
Model:
The following items shall be confirmed by the owner.
II. Introduction of ―one-to-one‖ consulting service mode ("√" for
yes and"×" for no)
□Always contact your service consultant if the owner has any
problem or requirement, while not someone else
□The service consultant is the only person who is designated by
the service station to communicate with the owner
□ "one-to-one ": only one service consultant shoulders the
III. Introduction of service consultant's main work ( "√" for yes
and "×" for no)
□ Service and reception of repair and maintenance requirement □
Accept complaints
□ Regular maintenance reminding and return visit □Consulting and
solutions for repair/maintenance
□Regular greeting return visit
□Repair/maintenance
reservation accepting
□ Service activities reminding and return visit □ Annual review
reminding/accepting
□Significant festivals greeting □Miscellaneous items handling of
owner's requirement
IV. Establishment of ―one-to-one" consulting service relation
Business card of service
consultant
Signature of owner / date:
Signature of service consultant/ date:
16
Reserved by Service Station
I. Confirmation of matters of concern when delivery (―√‖ for yes
and ―×‖ for no)
□ Basic methods of application has been introduced, vehicle has
been inspected face to face when delivery
□ Warranty service regulation has been clarified
□ Notices of driving have been clarified
□The significance of regular maintenance as well as maintenance
time/ mileage intervals has been clarified
□The significance of accepting maintenance /service in Chery
Authorized Service Station has been acknowledged.
□ "Maintenance Manual" and "Instruction Manual" have been
delivered, and reminded the owner to read carefully
□ Usage and function of Chery Company's customer service hot
line have been acknowledged
responsibility of one owner
□ If not satisfied, owner can select another service consultant
First sheet
Owner’s name:
Dealer of Sale Service:
VIN No.
Brief Introduction
17
Brief Introduction
“One-to-One” Consulting Service Card
Date of Purchase:
Model:
The following items shall be confirmed by the owner.
II. Introduction of ―one-to-one‖ consulting service mode ("√" for
yes and"×" for no)
□Always contact your service consultant if the owner has any
problem or requirement, while not someone else
□The service consultant is the only person who is designated by
the service station to communicate with the owner
□ "one-to-one ": only one service consultant shoulders the
responsibility of one owner
III. Introduction of service consultant's main work ( "√" for yes
and "×" for no)
□ Service and reception of repair and maintenance requirement □
Accept complaints
□ Regular maintenance reminding and return visit □Consulting and
solutions for repair/maintenance
□Regular greeting return visit
□Repair/maintenance
reservation accepting
□ Service activities reminding and return visit □ Annual review
reminding/accepting
□Significant festivals greeting □Miscellaneous items handling of
owner's requirement
IV. Establishment of ―one-to-one" consulting service relation
Business card of service
consultant
Signature of owner / date:
Signature of service consultant/ date:
18
Reserved by
I. Confirmation of matters of concern when delivery (―√‖ for yes
and ―×‖ for no)
□ Basic methods of application has been introduced, vehicle has
been inspected face to face when delivery
□ Warranty service regulation has been clarified
□ Notices of driving have been clarified
□The significance of regular maintenance as well as maintenance
time/ mileage intervals has been clarified
□The significance of accepting maintenance /service in Chery
Authorized Service Station has been acknowledged.
□ "Maintenance Manual" and "Instruction Manual" have been
delivered, and reminded the owner to read carefully
□ Usage and function of Chery Company's customer service hot
line have been acknowledged
□ If not satisfied, owner can select another service consultant
Second sheet
owner
Owner’s name:
Dealer of Sale Service:
VIN No.
Operation & Adjustment of Interior Devices
Description of Common Symbols on Vehicle
Symbol
Definition
CHECK ENGINE
Glass Drive Switch
Prohibitted
Rear Fog Lamp
Symbol
Definition
Antilock
Symbol
braking
system
Position light
Engine oil pressure
Safety warning
Throttle
Definition
warning light
fault
indicator lamp
Coolant temperature
overhigh
warning
light (red)
Coolant temperature
Front Fog Lamp
Cigarette Lighter
normal
indicator
(green)
A/C
Air
System
Conditioning
Brake
warning light
system
Identification of air
bag
19
Operation & Adjustment of Interior Devices
Symbol
Definition
Battery
Definition
Symbol
Seat belt ready
Hazard
High beam
warning
brake
indicator light
Lockup indicator
Air
bag
Horn
Vehicle maintenance
Battery positive
Headlamp switch
Definition
Windshield washing
flasher
Low beam
Parking
Symbol
indicator
fault
Windshield
indicator light
defrosting/defogging
Fuel level low
Inner circulating air
Rear
windshield
heating indicator
Outer circulating air
20
Operation & Adjustment of Interior Devices
Symbol
Definition
Symbol
light
Symbol
Definition
Indicator for interior
Unlock indicator
Warning
Definition
lamp switch
for
door and trunk lid
Audible alarm
open
Right
turn
lamp indicator
signal
Left
turn
signal
lamp indicator
21
Operation & Adjustment of Interior Devices
Chapter 2
Operation & Adjustment of Interior Devices
22
Steering Wheel Lock &
Ignition Switch
To lock the steering wheel, after
avoid using up the power of battery.
removing the lock, the steering wheel
II – Switch on the ignition circuit to
shall be turned slightly until you hear
the engage sound of steering wheel
locking.
enable all electrical circuits to work.
Both warning lamp and indicator light.
This is the proper position of key
I -- Steering system unlocked. The
during driving, and also is the position
circuits of electrical accessories are
that must be selected when the vehicle
switched on to operate the audio,
is trailed.
cigarette lighter, wiper and other
III – To switch on the starting motor,
electric appliances. But the ignition
and start up the engine.
switch and primary electrical circuits
The built-up
lock/ignition
type steering wheel
switch
includes
the
following key positions:
When the locking hole is in this
power off.
position, the wiper, audio and other
If it fails or is difficult to turn the key
from the LOCK position to this
B--the ignition switch is turned off, and
position, you can slightly turn the
the steering wheel is locked.
steering wheel to the left and right, and
When the key is drawn out from the
ignition switch, the steering wheel lock
then
the
steering
wheel
electrical
apparatuses
with
large
electric power consumption all be
switched off to ensure the vehicle starts
up.
locking
mechanism will be able to release.
There is a restart proofing equipment
inside the ignition switch. Once the
will be activated to lock up the steering
The key of ignition switch shall not be
wheel.
placed this position for a long time to
engine operates, this equipment can
prevent the starter from false startup to
23
avoid damaging the engine and the
Press down the
engine flywheel.
steering wheel to operate the horn. You
If failing to start, the ignition key must
be turned back to the B position prior
to restart, and then be turned to this
position. After the completion of
startup, release the key and then it will
rebound to the II position.
Horn
button on the
also can operate the horn even when
the ignition switch is in the OFF state.
Windshield Wiper &
Washer System
In the cold seasons, you shall
check whether the wiper
blade is frozen on the
windscreen prior to the use of wiper. If
the blade is frozen on the windscreen,
the wiper can be used only after the
ice-out of blade. Otherwise, it may
damage the motor of wiper.
It also may damage the motor of wiper
if you operate the wiper when there are
some obstructers on the windscreen,
such as snow cover.
Please clear the obstructers before you
operate theOnce
wiper.the engine starts up,
the keytheshall
DO NOT operate
wiperbeonreleased
the dry
immediately.
NOT
stay
windscreen,
otherwise itDO
may
scratch
the and
III position
forpermanent
a long
theonglass
result in the
damage
time.to the wiper blade.
The following functions are available
only when the ignition switch is turned
on. There are four operational positions
in total which shall be in OFF position
in case that the wiper is out of service.
24
INT (Intermittent Wipe)
HI (High-Speed Wipe)
from the nozzles in front of the
windshield and at the same time the
wipers operate.
Shift the control lever upward to INT
position from OFF position.
Shift the control lever dupward past
The wiper controller will operate
two positions to HI position from OFF
automatically once at every period of
position.
time.
The operation of water-jet
must not be more than 10
seconds, and the operation
cannot be done if cleaning liquid is
not available in the reservoir of
cleaning liquid, otherwise the
water-jet motor may be damaged.
Interior
Mirror
Rearview
Water-Spraying Switch
Regular Wipe
Shift the control lever upward past one
Pull the switch lever towards the
position to LO position from OFF
steering wheel and hold it at this
position.
position, then cleaning liquid will spurt
Turn
Left
Turn
Right
Anti-glare doctor bar
You can turn the doctor bar rightwards
25
or leftwards to adjust the angle of the
26
Driving
rear-view mirror if you want to reduce
the glare when driving at night. When
Control
Doors
Switches
on
Left rear-view mirror
adjusting position
the doctor bar is turned leftwards, the
Central
Position
rear-view mirror turns downwards a
certain angle; when the bar is turned
Left rear-view mirror
adjusting position
rightwards, the mirror turns upwards a
certain angle.
Sun Visor
The driver-side control switches
are left front, right front, left rear and
right rear electric window switches
and rear window safety switches
respectively.
Electric window switch of rear seat
The electric rear-view mirror
can be
adjusted using the regulating switch at
the driver-side The control switch can
operate only when the ignition switch
is in ON position.
The sun visor can be unfastened by
When the control switch is turned
loosening the retaining clip and turned
counterclockwise to the proper position,
to the side window.
The car running certificate, toll and
invoice etc. can be placed behind the
sun visor.
the left outdoor rearview mirror can be
Electric Exterior Rear-View
Mirror
adjusted; when the control switch is
turned clockwise to the proper position,
the right outdoor rearview mirror can
be adjusted.
27
Driving
When the control switch is turned left
The rearview mirror can be resumed to
or right to the proper position, push the
its original position by unfolding it
switch foreword, backward, leftward
outward to the proper position.
Rear Door
and rightward respectively to adjust the
position of mirror surface upward,
downward, leftward and rightward. The
switch should be turned to the central
position once more after the proper
adjustment.
The image in the convex
rear-view
mirror
is
seemingly smaller and
farther than the actual object.
Attention that the actual distance
away from the object shall not be
over-estimated.
Rear Electric Window Switch
The electric window can be operated
only when the ignition switch is at ON
position.
Electric Window
Each window can be operated by its
Left RearLeft
Window
Switch
front
doorLeft Front
Switch
Window
control switch which fitted on each
door trim panel.
The window can be opened or closed
by press-down or lift its control switch.
Right Rear Window Switch Right Front Window Switch During the ascending or descending of
window glass, if the switch is released,
If necessary, for example the car is in
narrow space, the outdoor rearview
the window glass will stay at the
current position.
mirror can be folded inside by hand.
28
Driving
The window lift control switch has
delay function, that is, it can still
NOTICE:
operate within 60 seconds after pulling
There is a safety switch button on the
out the key.
Each window lift control switch has the
function of light touch, that is to say,
the window glass can automatically
lower to the bottom if the switch is
pressed for one second.
door trim panel at the side door. If
press down the button, the switches of
the electric windows on the right front
door and two back doors are controlled.
In this case, the corresponding rear
window switches can be controlled
The control switches of other three
only through
windows are available on the door trim
window switch. It is recommended to
panel at the driver’s side besides the
do so when there is a person with
control switch of the window at the
qualified civil capacity or no civil
driver’s side.
disposition capacity children in the rear
Rear
Window
Switch
Safety
Take car to close the windows! It is to
be noted that you shall observe the
surroundings to avoid the occurrence of
injury accident generated due to
squeeze!
Front
Ashtray,
Cigarette Lighter
the driver-side rear
seat.
The cigar lighter cannot
be inserted for a long
time to prevent danger
from happening. If a baby solely
stays in the car, the cigar lighter
should be taken away.
The front ashtray is located at the front
of the shift lever. Pull outwards the
ashtray by hand and then use it. To
empty the ashtray, draw out the insert
first
The cigarette lighter is located at the
right side of ashtray. Press the cigar
lighter inwards and wait until it
automatically rebound, then the cigar
lighter can be used. Even if the ignition
29
Driving
switch is off, the cigar lighter can also
be used.
Lighting
Control
Front Ashtray
Cigar
Lighter
Headlamp Switch
Backlight
Switch
Regulating
OFF – Turn off the exterior lamps.
Side Light:
While operating the following lighting
equipment, please abide by relevant
traffic regulations.
Headlamp Switch
Turn
the
headlamp
switch
on
the
st
instrumental panel to the 1 position (i.e.
width lamp position), and, in this case,
front/rear postion lamp and the license plate
lamp light at the same time.
Backlight adjustment:
After the width lamp turns on, the
nightlighting of instrument, audio, A/C,
switch and etc light; and the brightness
of interior backlight can be adjusted by
30
Driving
operating
the
backlight
regualting
handle, and pass through the
force
switch.
point and then convert into the high
Low beam:
beam. The high beam indicator lamp
in the dashboard is also light on
Turn
the
headlamp
switch
on
the
instrumental panel to the 2nd position (i.e.
low beam position), and then the low beam
lights.
together with the headlamp high beam.
Move the handle towards the steering
continuously.
Front/Rear Fog Lamp
Switch
wheel to its original position to return
low beam lamp.
Flashing OF Headlamp
Headlamp
High\low
Beam Conversion
The front and rear fog lamps switch is
located on the control handle at the
lower left side of steering wheel.
During driving, if it is necessary to
flash the headlamp, just move the
handle towards the steering wheel to
When the headlamp swithc is in the
the resistant point, and then release the
low beam position, i.e., in case that the
handle to make it auto return. Repeat
low beam turns on, pull downwards the
this operation to flash the headlamp
When the headlamp switch is in the 1st
or 2nd position, turn the handle (section
with a black round point as shown in
the figure), turn on the front fog lamp,
and then turn the handle to turn on the
rear fog lamp.
31
Driving
Remind that the headlamp switch shall
st
Turning Signal Lamp
Interior front ceiling lamp
nd
be turned on (at 1 or 2 position) first
in order to turn on the fog lamp. Turn
on the front fog lamp, and then turn on
the rear fog lamp.
When the front fog light is connected,
its
indicator
lamp
in
the
instrument light will light on.
Switch is in the right position: ceiling
Only when it is in foggy, snowy and
lamp extinguishes.
rainy weather that badly limit the
Only with the ignition switch on can
visibility can the front fog light be
the turn signal light works.
used.
Left turn signal light --- Move the
When the rear fog light is light on, its
indicator lamp
in the instrument
light will light.
It is allowed to use rear fog light under
the condition of much lower visibility
due to its strong dazzle function.
handle downwards.
Switch is in the left position: ceiling
normally lights.
Switch in in the central position:
ceiling lamp lights when any door
Right turn signal light --- Move the
opens while extinguishes when the
handle upwards.
door closes.
When the turn signal light is connected,
its turn signal indicator light in the
dashboard will flash together with.
Trunk Lamp
If the trunk opened, the light will turn
32
Driving
on (but it is not under the control of the
give an alarm to the vehicles which
ignition switch). After parking, please
follow your vehicle and tell them that
notice to cover the trunk properly.
your vehicle has trouble or hazard. The
system can by turn on/off immediately
Hazard
Warning
Flasher Switch
press-down
the
switch.
With
the
Backup Lamp
After turning on the ignition switch and
shifting to the Backup position, the
backup lamp lights while extinguishes
after turning off the ignition switch or
shifting to other gear positions.
ignition switch at OFF position, this
hazard flasher warning lamp can also
be operated.
After the warning flasher turns on, the
indicator light (yellow area) on the
switch flashes. The right and left turn
signal
The triangle shape as shown in the
lights
on
the
combination
instrument also flash at the same time.
figure is the hazard warning flasher
switch. This switch is located on the
Braking Lamp
central instrument console, and the
position between the audio panel and
A/C control panel.
Step down the brake pedal to light on
braking lamp; if release it, the lamp
will turn off immediately.
The hazard warning flasher switch is
applied only in case of a emergency to
前排烟灰缸
33
Driving
Chapter 3
Driving
34
Driving
DRIVING
Safety considerations
The idling speed of an engine is
controlled by the electric control
Start-up
system. The idling speed is high when
the
Preparatory work before
start-up
The start-up of engine is controlled by
the electric control system of the
engine.
engine
advantageous
starts,
to
which
increase
is
the
temperature of the engine. After the
The long-time high-speed idling
ofDO an
NOTengine
start up may
your vehicle
create
over-high
on the airproof
temperature
garage orofother
the
engine and
enclosed
exhaust
locations.
system,The
which
exhaust
has
the
gasrisk
fromofa vehicle
firing and
is noxious.
other damages.
The door
Therefore,
of garage DO
mustNOT
be opened
make your
before
vehicle
the
stop,
engine
travel
starts.
at idle
For speed
the details,
or run see
on the
ground
sectionwhere
―Caution
there against
are hay the
or other
exhaust
dry
coverings.
fume from The
a vehicle‖
exhaust
in this
system
chapter.may
make the temperature of the engine
compartment and exhaust pipe rise up,
which it may cause a fire.
their safety belt. For the safety
temperature of the engine rise, the
idling
speed
shall
belt and its instruction, see the
decrease
Chapter
automatically. If the idling speed fails
―Seat
and
Safety
Protection‖
to decrease automatically, you shall get
To start up the electronic injection
to
engine, do not step on the gas pedal
Station to make your vehicle repaired.
and other electrical accessories
before and during starting. You step on
Do not make the engine operate at the
power off.
the gas pedal only when it is a poor
speed, which is more than the specific
start. For the details about the start of a
idling speed, for above 10 minutes.
the
Chery
Authorized
Service
2.
3.
Before the vehicle starts:
1.
Confirm that all passengers fasten
Confirm that the handbrake is
pulled up.
vehicle, see the Section ―Start-up of
engine‖ of this chapter.
Confirm that the front headlamp
4.
Confirm that the selector lever is
in NEUTRAL position.
35
Driving
5.
Turn the ignition switch to the
Station to make your vehicle
the first start, then you shall turn
―Ⅱ‖ position other than the (III).
required.
the key to the OFF position and
Turn the ignition switch to the
If the driver’s safety belt is already
fastened tightly before the ignition key
turns on, the safety belt warning lamp
doesn’t light.
can be turned freely. This may be
―Ⅲ‖ position, DO NOT step on
wait for 10 seconds to have a
conducted by the following several
the accelerator pedal, and release
retry. If the engine fails to start
reasons:
the key immediately after the
twice continuously, you can step
engine starts. In this case, the key
on the gas pedal to the extreme
returns back to the ―II‖ position.
and keep this position, and then
If it needs great effort to turn the key,
Start the engine
you can turn the steering wheel
leftwards and rightwards until the key
1.

The front wheel deflects.

The front wheel touches the curb.

The steering wheel is turned when
-12C and it is difficult to start
you go abroad or get down. (The
the engine within 5 seconds for
steering wheel self-locks).
the first start, then you shall turn
6.
2.
position. After the engine starts,
release the key, and then release
the accelerator pedal slowly as
the engine speed increases.
the key to the OFF position and
Turn on the ignition key, and, at
wait for 10 seconds to have a
the same time, confirm that the
retry.
instrument panel warning lamp
lights for a short time. If the lamp
turn the key to the START
If the temperature is more than
3.
If the temperature is less than
doesn’t light, it is required to get
-12C and it is difficult to start
to the Chery Authorized Service
the engine within 5 seconds for
4.
After the engine starts, it operates
for several seconds at the idling
speed, and then you step on the
foot brake, release the handbrake
and shift to a drive gear to
36
Air vent
prepare for driving.
5.
The ambient temperature range
applicable to normally start an
In the following cases, check the
exhaust
system
and
the
body
ventilation system of the car.
engine is -25℃ - 40℃ (when the

Lifts the car for overhaul.
ambient temperature is out of this

The sounds of the exhaust system
range, other abnormal conditions
Driving
In case foreign smell of exhaust fume
is smelt inside the car,
immediately request a
Chery Authorized Service
Station to overhaul the car and do not
continue to drive. The exhaust fume is
noxious and may endanger life.
change.
may appear).

Beware of the car’s
exhaust fume
The car is damaged by collision.
Remember to ventilate
Open the car’s windows for more than
Though the car’s exhaust fume is
2.5cm when parking and idling the car
colorless and odorless, it contains
long in an open area, or, turn on
carbon monoxide, the poison of which
ventilation function of A/C system to
you must beware of. Some integrants in
enable fresh air to enter the car.
the engine’s exhaust gas and chemicals
Clear snow, fallen leaves
and
other
foreign
material blocking at the
air inlet to improve the ventilation
capacity of the car.
contained in or emitted by some
automotive parts may be carcinogenic,
cause neonate defects or other genital
system impairments.
37
Driving
Self-adapting function
of the engine’s control
system
Shut down the engine
The engine temperature will remain
high after the ignition switch is turned
off and the engine stops, so, leave the
electronic cooling fan of the radiator
continue to run for about 10 minutes.
Even if the cooling fan stops running, it
may run again suddenly because of
high temperature. Therefore, take
special care when working by the
engine.
If the battery cable has been ever
removed, some abnormal phenomena
may occur in the initial running stage
of the car after reconnection.
Note:
This is
because the engine’s control system is
Release the accelerator pedal, wait until
re-studying to adapt the engine, which
the engine revolution falls to idle speed,
are normal phenomena.
and then turn off the ignition switch.
Revolution limitation to
the engine
Do
not
shut
down
the
engine
immediately when parking after a long
Brake
Do
not
apply
the
accelerator pedal before
shutting down the engine.
time high speed running; leave the
To
protect
the
engine,
engine
engine continue to run for 2 minutes at
revolution is limited by an electronic
a revolution higher than the idle speed,
unit-ECU.
so that the engine temperature can fall
gradually.
38
Driving
Dual-circuit brake system
You car is equipped with a diagonal
dual-circuit brake system. In case one
of the two circuits fails, the other
circuit still can maintain effective
operation.
grinding between metals or screams,
The wear status of the brake lining
the brake linings may be seriously
depends greatly on the operating mode
worn and need to be replaced.
Then,
and driving method. For a vehicle
send the car to a Chery Authorized
mainly used in urban traffic, the
Service Station for overhaul.
working conditions of its brake linings
Send the car to a Chery Authorized
Service Station for overhaul, in case
Brake fluid
there is a steady chatter or vibration
If the brake system alarm lamp does
not extinguish when releasing the hand
being transferred to the steering wheel
when braking.
brake, it indicates that the brake fluid
The new brake lining must go through
level is too low.
a running-in before reaching its optimal
Check the brake fluid level height
regularly as required.
braking effect. The braking effect will
Working instructions for
the brake system
under which case, apply a larger force
to
the
brake
pedal
properly
to
compensate the braking effect. This gist
also applies to the new brake lining
make
replaced.
noises
occasionally.
However, in case it makes sounds like
In case one of the two brake
circuits fails, you need to
apply a larger force to the
brake pedal and the stopping distance
will also be longer. In such case,
send your car to a Chery Authorized
Service Station for overhaul before
proceeding to your journey.
the car to a Chery Authorized Service
Station for inspection of the thickness
fall a little in the initial 200 kilometers,
It is normal for the brake system to
some
is very hard, therefore, be sure to send
Immediately add brake
fluid to maintain the liquid
level at MAX mark and
send the car to a Chery Authorized
Service Station for inspection of the
brake system.
of the brake linings or for replacement
of
the
linings
at
the
specified
39
Driving
maintenance mileage.
When running downhill, shift to a
Brake booster:
lower gear timely to make full use of
the engine’s brake action so as to
reduce the load of the brake system.
At this time, do not keep stepping on
the brake pedal even if braking is
The brake booster is
controlled by the engine vacuum.
This device will operate only when
the engine works, so, never slide
when the engine is engine flameout
during downhill running.
needed.
In case the brake booster is unable to
The damp brake disc may reduce the
brake
efficiency.
After
paddling,
rainstorm or car washing, apply the
brake pedal lightly to make the brake
work because of the car’s being towed
or sole failure, apply a larger force on
the pedal to compensate the booster’s
If the front spoiler is added on
the car, ensure that the airflow to the
front brake is unblocked; otherwise, the
brake system may overheat due to poor
heat emission, thus reducing braking
effect.
ABS Antilock brake system
(ABS)( )
ABS can avoid lock of wheel. It
can even enable the car maintain
steering behavior during emergency
brake, which allows you to avoid the
barriers.
effect.
disc and brake lining rub to generate
heat, which will evaporate the water
Therefore, it is desirable that no foot
and recover the braking effect.
pad or other coverings are laid on the
Each pedal could be stepped
to extreme and can return completely
and move freely.
floor around the pedal. If really
required, ensure that the foot pad laid
will neither hamper the movement of
the pedal nor slide itself.
40
Driving
Actions of ABS
the barriers where enough space is
available.
We recommend you firstly get familiar
with this brake technique, however,
avoid taking any unnecessary risk.
ABS does not work during the normal
braking; it works only when the wheel
is to be locked. When braking, the
brake pedal’s fluctuation accompanied
by noises indicates that ABS is working;
such fluctuation and noises are normal.
At this time, do not release the brake
pedal.
Use ABS to brake
Keep applying the brake pedal with full
force during an emergence may initiate
Self-inspection of ABS
ABS will perform self-inspection after
the car starts. Some mechanical noises
can be heard during this course, which
is normal.
Though ABS can ensure
the optimal braking effect,
the stopping distances
may vary greatly with road surface
status. ABS can not always ensure
reduction of stopping distance. For
example, on sands or snow, the
stopping distance of a car with ABS
may be longer than that of a car
without ABS. Also, you can not use
ABS to eliminate the dangers
caused by extreme close to a car
before, paddling, sharp turning or
In case the ABS alarm lamp
bad road surfaces as well as to
is found light during
prevent the accidents due to mistake
running, it indicates that a
and incorrect driving. Please drive
failure occurs in ABS system; then,
with care and slow down when
stop the car and contact a Chery
turning.
Authorized Service Station.
ABS immediately, which enables you
to keep control over steering and avoid
41
Driving
Use the important
principle of ABS
brake
Hand brake
To release the hand brake, pull up the
hand lever slightly, press down the
release button at the end of the handle
and simply push it down.
The hand brake applies action on the
rear wheel. Applying the brake pedal
while pulling up the hand brake can
facilitate the hand brake’s pulling up.
1. Apply the brake
pedal with full force
and then hold
After parking, tighten the hand brake
upwards to prevent the car from sliding
Gearshift
Methods
and
attentions
for
due to lapse of attention.
Pull up the hand brake
handle before leaving the
car.
When applying hand brake with the
ignition switch turned on, the brake
alarm lamp will light.
2. Turn the steering wheel to
round the barrier. No matter how
fierce the braking is, you can
maintain control performance
Pull up the hand lever to use the hand
when turning.
brake.
use/operation:

When shifting gear, completely
apply the clutch pedal and rapidly
control the gearshift lever to shift
gear after the driver has detached
42
Driving
the engine torque.

Apply a slow speed gear when
with
the
clutch
When shifting the transmission

engine under NEUTRAL and
flameout
otherwise,
state
the
is
forbidden;
synchronizer’s
service life may be affected.

When shifting gear, the flapping
or right dead point) for more than
10 seconds.

transmission is heard and such
abnormal phenomena as obvious
resistance during operation etc.
are found. Continue to drive only
Refill power steering fluid at once
when its liquid level is blow MIN
mark in its reservoir. Do not drive
Immediately stop the car to
the car before refilling.
In case of failure in the power steering
system or engine shutting down, the car
will lose the steering booster force.
Then, you still can turn the steering
wheel, but a larger force is required.
after the failure is removed.
Check the following items if the car
Steering
method (i.e. one push and one
release) is forbidden and you
extreme position (turn to its left
Do not put your hand on the
inspect when abnormal sound in
When the engine is running, do
not turn the steering wheel to its
wear of the shift fork.

forcibly shift gear to start the
reducing
otherwise, it will cause excessive
the synchronizer’s service life
Utilizing the synchronizer to
greatly
gearshift lever when driving;
do not step over gear; otherwise,


thus
reducing friction.
from a lower gear to a higher gear,
may be affected.
lever,
synchronizer’s lock ring and
disengaged is not allowable.

steering system:
sliding and rubbing time of the
running downhill and turning;
sliding
should keep pressing the gearshift
wanders or swings:

If any tire is under-inflation
In order to avoid damage to the power
43
Driving


If the wear status of the tires is
If water enters the intake pipe of the
even
engine, it will cause serious damage to
If any suspension component is
loose or worn
the engine. In case of a deeply paddling,
the
water
can
enter
into
the
transmission from the air vent, which

If any steering component is loose
may damage the transmission.
or worn
After paddling, be sure to drive slowly

If wheel alignment is correct
and slightly apply the brake pedal for
several times to remove the water from
Wading
Be sure to use the unleaded
fuel. The leady fuel can cause
permanent damage to the
catalyticUnleaded
convertergasoline
and the oxygen
sensor. Chery Automobile Corporation
Limited will not be responsible for any
damage due to use of leady fuel. The
damages of this kind are beyond the
scope of maintenance guarantee.
Please contact the nearest Chery
Authorized
Service
Station
immediately if you have added the
leady fuel by accident.
the brake. The water on the brake will
make brake performance fall.
If the car has to wade during journey,
be sure to drive carefully and slowly,
especially when you do not learn the
water situation. Do not continue to
3-way
converter
catalytic
drive ahead if the water can submerge
The catalytic converter helps to reduce
the wheel hubs.
the exhaust gas pollution.
When paddling, both traction and brake
The gasoline engine car is equipped
performance of the car will fall and the
with narrow-necked filler, which can
car also may be in danger of flameout.
only accommodate the compressor gun
44
Driving
for unleaded gasoline.
Drive a car equipped with
the catalytic converter
Avoid any case that
may cause
unburned or partly unburned fuel to
enter the catalyst, especially when the
engine is at a high temperature.
Note:
If the engine is working all
the times, the 3-way catalytic
converter will become very
hot. Therefore, remember to
wear protective glove during
maintenance to avoid scald.
Avoid the following cases:

Fuel is exhausted.

Unnecessary and long starting of
the engine.
Parking
During driving, drive the
car at a lower speed to the
nearest Chery Authorized
is absolutely
unallowable
to
Service ItStation
in case
of poor
out the ignition
of
ignitionpull
or performance
fall ofcable
the car.
check
if the
Be surethe
notignition
to drivecoil
at ato
high
speed.
working status of the engine is normal
or to observe the spark jump status of
the spark plug by means of cylinder
flameout; otherwise, the 3-way
catalytic converter may be damaged.
Do not park, idle or drive the car on dry
leaves or hay. Potential fire hazard still
exists even if the engine is flameout,



Let the engine run with one of the
because the exhaust gas will still emit
spark-plug cable joints removed.
considerable heat in a short time.
Start the car whose engine is still
Be sure to turn off the ignition switch
at the working temperature by
before leaving the car. Do not leave the
pushing or towing.
engine run with nobody inside the car.
Turn off the ignition switch
If you neglect this point, your car may
during running.
move by chance, which may cause
45
Driving
Good driving habit
personnel injury or property damage.
Foreseeing the dangerous condition and
Chassis protection
keeping a safe running distance with
You car is equipped with heat shield.
Do not apply any painting dressing on
the body of the heat shield, exhaust
pipe or catalytic converter or its
vicinity area. Do not remove the heat
the vehicle before can reduce not only
The above chart indicates
how the fuel consumption is affected
by the driving speed and the gear
selection. Maintaining at a lower gear
to improve acceleration performance
may cause obviously higher fuel
consumption.
the fuel consumption but also wear and
noise of the brake.
shield.
Fuel consumption
Fuel consumption is
affected by the following
factors:
Driving speed and gear
selection
Stroke
temperature
distance/engine
Frequent cold start and short distance
When the car is in a traffic jam
at a level crossing or waiting for the green
light long, engine flameout is
recommended, because too long idling of
the engine may increase fuel consumption.
driving may obviously make the fuel
Load condition of the car
consumption rise.
Increasing the load of the car may
Fuel consumption
Traffic and road status
cause higher fuel consumption.
Traffic jam, uphill, excessive curves
and rough road surface will all have
adverse
influences
consumption.
Speed
on
the
fuel
Technical condition of the car
Under pressure of the tire or improper
maintenance for the engine and the car
will
also
cause
higher
fuel
46
Driving
consumption.
pressure.
Essentials for fuel-saving
driving and environmental
protection:


Regularly perform maintenance
for the car, which should be
implemented
Authorized
Run under fuel-saving mode and
by
a
Service
Chery
Station
preferably.
use additional electric load only
when necessary.
Radiator fan
After parking and shutting
down the engine, the
radiator fan will continue to
run for a period of time (about 10
minutes) because the engine is still
under a thermal state and it will stop
running until cooled to a certain
temperature. Even so, the fan still can
start suddenly due to temperature rise
in the engine compartment caused by
the
temperature
of
outside
surroundings (under insolation or in a
high temperature region). Therefore,
be careful when working in the
engine compartment to avoid
occurrence of any accident!

Start without pre-warming the car.

Apply the gas pedal smoothly.

Quickly shift to the next higher
ECU of the engine. The switch will
gear to obtain a lower engine
automatically turn on the fan circuit
revolution.
when the coolant or the engine
If the fan fails to run after the
compartment
temperature of the coolant reaches the
The radiator fan is an electric one and
its working condition is controlled by
reaches
a
certain
Descriptions:

Foresee the traffic status.

Immediately turn off A/C and rear
the fuse of the fan for blowing out, if
windshield
necessary, replace the fuse.
temperature.
heating
functions
start-up temperature of the fan, check
when unnecessary.
The revolution of the fan has no

Regularly check/adjust the tire
relation to that of the engine and
47
Driving
shifting to a lower gear can not
increase the cooling effect of the fan.
Therefore, need not to shift to a lower
gear when the engine runs smoothly
and its speed does not fall obviously
when climbing.
48
Instrument Panel
Chapter 4 Instrument
Panel
49
Instrument Panel
Instrument
Turn Signal
A/C Vent
&
Position Lamps
Switch
Steering
Wheel
Combination
Instrument
Wiper Switch
A/C Vent
Panel
Exterior
Rear-view
Mirror Knob
Engine Hood Nightlight Horn Switch
Pull-up Switch Adjusting
Switch
A/C System
Audio System
Wind Direction
Glove Box Adjusting Knob
50
Instrument Panel
1. Left Turn Signal Lamp Indicator
2. Door Open Warning Light
3. Battery Charging Indicator
4. Seat Belt Warning Light
5. Engine Fault Warning Light
6. ABS Warning Light
7. Airbag Warning Light
8. Brake System Warning Light
9. Engine Oil Low Warning Light
10. Fuel Low Level Warning Light
11. Coolant Temperature/Level
Warning Light
12. Electronic Throttle Fault
Warning Light
13. Right Turn Signal L
Indicator
14. Maintenance Indicator
15 Front Passenger Side Air
Switch Indicator
16. Parking Position Indicato
17. Front Fog Lamp
Combination Instrument
Panel ( )
18
19
16
17
15
51
20
20
22
1
2
3 4
5
7
9
10 11
12 13 14
Instrument Panel
6
8
self-checking. If a certain warning light
In case that the ignition switch turns on,
does not light, or it still lights or flashes
this warning light will light for a short
continuously after the engine has started,
time and the ABS system will perform
please drive your vehicle to the CHERY
self-checking at the same time and
Authorized Service Station to make the
determine whether the system is in good
related system repaired.
condition.
If
this
warning
light
continuously light or flash after the
Low fuel indicator lamp
ignition switch turns on or during the
traveling of vehicle, it indicates that this
ABS system has trouble. However, the
vehicle still has the general braking
Warning devices
The warning devices are used to show
driver the traveling condition of the
vehicle and whether the vehicle has
gotten problems which can cause serious
ability (without ABS) unless the brake
When the level of fuel in the fuel tank is
system warning light also lights. In this
below 10 liters, this lamp lights and give
case, please drive your vehicle to the
an alarm, and the pointer of the fuel
CHERY Authorized Service Station to
gauge will point to the red alarm line.
make it repaired A.S.A.P. However, you
damage and harm to the vehicle. If some
When the indicator lamp lights, please
one system has trouble, its corresponding
refuel as soon as possible.
warning light will light or flash.
should drive carefully and don’t drive at
high speed. Please refer to ―Brake‖ for
the precautions on the use of ABS
ABS Warning light
system.
When the ignition switch turns on, a
majority of warning lights will light for a
short time to perform the system
52
Instrument Panel
Parking brake warning light
please get to the CHERY Authorized
Engine fault warning lamp
Service Station to make this system
inspected.
This warning light works only after the
ignition switch turns on.
Parking/Position
lamp
indicator
After the hand brake is pulled up, this
warning light will keep lighting.
Brake system warning light
When the position lamp turns on, this
indicator lamp lights.
Seat belt warning lamp
This warning light works only after the
ignition switch turns on. In case that the
brake system fails to operate or the brake
fluid level is low, this warning light will
light.
In case that the ignition switch turns on,
the warning lamp will light to remind the
When this warning light turns on, check
whether the brake fluid level is low. If
driver to fasten his/her seat belt if he/she
doesn’t fasten the seat belt.
If the brake system warning light lights
during driving, it indicates
there is something wrong
with one of dual-brake circuits. In this
case, carefully drive your vehicle to the
nearest CHERY Authorized Service
Station to make this system examined
and repaired by the professionals.
Considering the serious decrease of
braking performance and the extension
of braking distance, you shall keep
longer distance from the previous
vehicle during driving, and shall
increase the pressure applied on pedal
as required.
If both the ABS warning light and the
brake system warning light are ON
simultaneously and persistently, stop
the vehicle immediately under the
condition of safety warranty. Prior to
continuing your journey, please drive
your vehicle to the CHERY Authorized
Service Station to make the brake
system examined.
the brake fluid level is low, immediately
refill the brake fluid up to the level
between the MIN and MAX marks, and
53
Instrument Panel
When the ignition key is ON, this
Airbag warning light ( )
light will light.
warning light flashes and the engine’s
electric
control
system
is
in
the
Turn signal indicator light
self-checking state. If there is no trouble
in this system, then the warning light
When the ignition switch is ON, the fault
extinguishes after the engine starts up,
There are a left turn signal indicator light
indicator shall light for 3 – 4 s and then
and if the warning light flashes at all
and a right turn signal indicator light.
extinguish. It indicates that the airbag
times, the engine must be checked.
When the left/right turn signal lamp turns
system works normally. If the fault
If the warning light flashes during
on,
indicator lights continuously, it indicates
driving, it indicates there is something
indicator light also flashes slowly at the
wrong with the electric control system of
same time. When the hazard flasher
the engine, please get to the nearest
warning light is ON, the left/right turn
CHERY Authorized Service Station as
signal lamp and the left /right turn signal
soon as possible to make your car
indicator light will flash at the same time.
examined and repaired.
If the flashing rate of the turn signal
Service Station to make this system
indicator light is quicken to the twice of
examined.
High beam indicator light
the
corresponding
turn
signal
there are trouble codes.
If this warning light flashes during
driving, it indicates there are some
troubles in this system. In the case, drive
the vehicle to the CHERY Authorized
original value, it indicates there is some
wrong with the corresponding turn lamp.
When the high beam indicator light lights
or the headlamp flashes, this warning
54
Instrument Panel
Front passenger side airbag
switch indicator light ( )
extinguishes after the engine starts up. If
The warning light shall light when the
this lamp still light persistently after the
ignition switch turns on, and extinguish
engine starts up or if it flashes during
after the engine starts.
driving, please stop your car immediately,
There is a front passenger side air bag
switch at the side of front passenger side
shut down the engine and check the
engine oil level.
instrument panel, with the ON/OFF
In case that the engine oil pressure is
position which can be selected by
below 0.3 Bar and the speed of engine is
inserting and turning the ignition switch.
less than 300 rpm, the indicator lamp
In case that OFF is selected, the indicator
flashes to give an alarm to the driver.
light of PAB (Passenger Airbag) on the
instrument panel lights, and the front
passenger side air bag fails to operate.
And in case that ON is selected, the
indicator light extinguishes.
Low engine oil
indicator lamp
pressure
lamp
flashes,
and
then
your vehicle immediately, shut down the
engine, and then check the generator belt.
If the generator belt is in good condition,
please immediately drive your vehicle to
the nearest CHERY Authorized Service
Station to make your vehicle examined
below 0.3 Bar and the speed of engine is
and repaired. But in consideration of the
greater than 300 rpm, the indicator lamp
fact that the battery will discharge
flashes, and the buzzer gives an alarm at
continuously during driving, all the
the same time.
unnecessary electrical equipment shall be
If the engine oil level is considerably low,
Generator warning light
indicator
or if it lights during driving, please stop
In case that the engine oil pressure is
immediately refill the engine oil.
When the ignition switch is ON, this
If this warning light does not extinguish
turned off, including A/C system.
If the generator belt has been damaged,
If the engine oil is used out
quickly, please get to the
CHERY Authorized Service
Station to make your vehicle
examined.
you should not drive further, and the
55
Instrument Panel
vehicle
must
be
overhauled
by
professionals.
Coolant
temperature/level
warning light
This warning light is located at the center
throttle, please get to the nearest CHERY
of the clock display on the center of
Authorized Service Station as soon as
instrument panel. When the ignition
possible to make your car examined and
switch turns on, this light will indicate
repaired.
the condition of four doors and trunk lid
Brake lining warning light
if not properly close.
Electronic throttle
warning light
After the ignition key is ON, this light
shall light for several seconds, and then
extinguishes. If the lamp still light after
several seconds or if the light flashes due
to the over-high temperature or low level
of the coolant, and the buzzer gives an
alarm at the same time during driving,
stop your car immediately, shut down the
engine and check the coolant level, and
refill the coolant as required.
Door/Trunk
warning light
lid
OEPN
fault
When the brake lining is seriously worn,
this warning light will light to give an
This warning light shall light when the
alarm. In this case, please drive your
ignition switch turns on, and the engine’s
vehicle carefully and get to the Service
electric
Station to make brake lining replaced
control
automatically
check
system
the
shall
electronic
A.S.A.P.
throttle. If this system has no trouble, the
warning light will extinguish after the
completion of self-checking, and if this
warning light flashes at all times, the
eletronic throttle must be checked.
If the warning light flashes during
driving, it indicates there is something
Be care not to be scalded!
If the engine is hot, the
cooling system is in high
temperature, high-pressure state.
Thus, take care to open the radiator
cap only after the engine cools down.
Never touch the radiator fan!
wrong with the engine’s electronic
56
Instrument Panel
Maintenance indicator light
Engine coolant thermometer
zone for a long time, please drive your
vehicle to
the CHERY Authorized
Service Station to make your car
examined and repaired.
C to H – Normal temperature
zone
When the mileage reading on the
odometer reaches the preset value (5,000
In the case of normal driving, the needle
km), this warning light will light to
of the thermometer shall stay within this
remind the owner to get to the Service
zone.
Station for maintenance of the complete
vehicle.
After
maintenance,
the
completion
of
the technician of
the
Service Station will turn off this indicator
It
is
designated
to
display
the
temperature of engine coolant.
The needle may drift out of this zone
when the outside temperature is very
high and the engine load is very heavy.
<C – Low temperature zone
You still can drive the vehicle so long as
During the warming up process, the
the coolant warning light does not flash.
engine will operate within this zone for a
If the coolant warning light flashes, shut
short period of time. It shall be avoided
down the engine and then check the
that the engine operates at high speed in
cooling system.
light.
this temperature zone. Meanwhile, the
working load of the engine can’t be too
heavy
>H - Overheat Zone
If the needle of the thermometer goes
into this red zone, it indicates that the
If the needle of thermometer stays in this
57
Instrument Panel
engine is overheated. In this case, please
have the front bumper repaired.
distance.
Fuel gauge
When refueling the fuel tank again, the
securely stop your car immediately, turn
off the ignition key and find the cause of
refillable fuel quantity may slightly lower
problem after the engine cools down.
Installing the auxiliary front headlamp on
than the rated capability because some
Please DO NOT open the
radiator cap when the engine
is still overheated. Restart the
engine only after troubleshooting.
the front of cold air inlet located under
fuels remain in the tank.
the front bumper will make influence on
If the low fuel warning light is ON,
the circulation of the cooling airflow,
please refuel A.S.A.P. See ―Low fuel
which has some disadvantages to cool
warning light‖.
Description:
the engine.
If the outside temperature is very high,
Capacity of Fuel Tank: 48 Liters
the engine is easily overheated when the
When the needle of fuel gauge gets to the
engine operates under heavy load!
―E (Empty)‖ position (indicated by the
The front spoiler is also used for
directing the cooling air. It may cause the
engine overheating if the spoiler is
Speedometer
arrow as shown in the figure.), it
indicates that there are still about 5 liters
of fuel left in the fuel tank.
damaged or even broken due to impact.
The needle of fuel gauge leaves the ―F
In this case, please get to the CHERY
(Full)‖ position only after the vehicle is
Authorized Service Station in time to
fully refueled and then travels a stretch of
It indicates the current driving speed of
58
Instrument Panel
vehicle.
The intermediate area of LCD display is
used to display the vehicle’s total
NOTICE:
mileage.
The right area of LCD display is
The speedometer is subject to the
applicable
influence of size of the vehicle’s tires.
mileage/instantaneous
fuel
Please utilize the CHERY’s authorized
consumption/average
fuel
tire with the same size of original tire,
consumption/clock display (which can be
otherwise the speedometer may not
switched).
display the propre speed of the vehicle.
LCD display (
to
display
the
one-way
The method to switch
the
one-way
mileage/instantaneous
fuel
consumption/average
fuel
consumption/clock
display is as follows:
)
Press the clock adjustment button on the
vehicle instrument (<0.3 s) to switch the
display
of
the
one-way
mileage/instantaneous
fuel
In the left area of LCD display, the gear
consumption/average
fuel
position is displayed. This area is applied
consumption/clock
to display the current gear position of the
one-way mileage mode, press the button
vehicle with automatic transmission. And
for a long time (>1 s) to clear the
the vehicle with manual transmission
one-way mileage.
display.
In
the
only has no the function.
59
Instrument Panel
The method to adjust the
clock
display
is
as
follows:
MIN digit of the clock, with one minute
The red area in the upper right side of the
increament every one press. And pressing
dial represents the highest allowable
this button for a long time will
speed range that the engine can get in a
automatically increase the value of MIN
short period of time under the operating
digit.
temperature of the engine after its
After the completion of time adjustment
Press the clock adjustment button on the
vehicle instrument to adjust the right area
of LCD display to the clock display
mode. In this case, press the clock
running-in.
of the clock, several seconds later, the
However, it is recommended to push the
digital clock doesn’t flash any more. It
shift control rod into the next higher gear
indicates that the time of clock is
or remove your leg from the accelerator
corrected.
pedal when the needle reaches this zone.
adjustment button and keep it for
approximate 4 s. And the HOUR digit of
Tachometer
NOTICE:
the digital clock will frequently flash.
Press the clock adjustment button to
Entering into the next higher gear early is
adjust the hour digit of the clock, with
favorable to save fuel and decrease the
one hour increament every one press.
driving noise.
Pressing the button for a long time will
automatically increase the value of
Once you find the engine operates
HOUR digit; after the completion of
unsteadily, please immediately shift the
HOUR digit adjustmenet, about 6 s later,
control rod into the next lower gear.
the MIN digit of the digital clock will
automatically flash. In this case, press the
clock adjustment button to adjust the
It is used to display the engine speed
(rpm).
During the running-in period,
DO NOT let the engine
operate at high speed!
60
Ventilation and A/C System
Chapter 5
Ventilation and Air Conditioning (A/C)
System
Ventilation and A/C System
Air Conditioner System
VENTILATION
The outside air enters the vehicle via
the
air
intake
in
the
front
of
windscreen. Please keep the air intake
located under the window glass free of
snow cover, tree leaves, and other
foreign materials to ensure that the
heating and ventilating parts can
normally and effectively operate.
Ventilation and A/C System
.
Windscreen Vent
Side Defroster Vent
Side Defroster Vent
Instrument Panel Vent
Floor Vent
63
Ventilation and A/C System
Side vent
Central vent
The conditioned air flows into the
Front windscreen defroster vent
The conditioned air flows into the
The cold or hot air is guided to the side
interior of vehicle via two side vents.
windows via this vents (controlled in
interior of vehicle via two central vents.
the range of exterior rear-view mirror)
The direction of airflow can be changed
by turning the grille.
3
1
1
2
2
1. Front Window Defroster Vent 2. Side Vent 3. Central Vent
Ventilation and A/C System
Ventilation and warm air
Control Panel
The A/C system mixes the cold air
1. Temperature control knob
with hot air to adjust the
2.Air flow distribution knob
temperature which is kept constant
3.Blower knob
at any speed of vehicle.
4.Inner/Outer air circulation control
lever
2
3
5. A/CSwitch
1
5
4
The velocity of air flow depends on
the blower. Turn on the blower
during driving, if necessary.
Ventilation and A/C System
speed of blower (4 positions in total). The
vehicle.
Temperature control knob
velocity of wind is adjusted by the blower.
It is applicable for the normal ventilation,
The temperature control knob is used to
To improve the comfortability, turn on the
heating and cooling.
control the temeprature of air which flows
blower during drviing.
Inner circulation mode (
)
out via the vent.
The interior air circulates within the
Blue position: cold air
interior of vehicle. In the dusty
Red position: heating
environment, or to avoid that the exterior
waste gas enters into the interior of vehicle,
and to rapidly cool or heat the interior air,
this mode applies..
Inner/Outer air circulation
control lever
The
continuous
use
of
the
inner
circulation mode will make the interior
It is applied to select the exterior fresh air
sultry and the window glass frosting. So,
or interiro circulating air.
the inner circulation mode is in service
Blower knob
Outer circulation mode (
The blower knob is used to control the
The exterior air enters into the interior of
66
!NOTICE:
)
only for a short time.
Ventilation and A/C System
Air flow distribution knob
This knob is ued to select the direction of
The air flows out from the central and
side vents.
air flow.
This knob has the following five
positions:
“Foot defrosting” position (
“Head and foot” position (
)
The air flows out from the lower
)
discharge ports of front seats, windscreen
The air flows out from the central vents
defroster
and the lower discharge ports of the front
defroster vents
vents
and
front
window
seats..
Head
Head and foot
Foot
“Foot” position (
Foot defrosting
The air mainly flows out from the lower
Defrosting
discharge ports of front seats.
“Head” position (
67
)
)
“Defrosting” position (
)
The air flows out via the windscreen
Ventilation and A/C System
defroster
vents
and
front
window
defroster vents.
This switch is used to turn on/off the
conditioner will make the engine hot.
compressor of the A/C system.
Observe the water temperature gauge, and
Start the engine, turn the blower knob to
the appropriate wind velocity, and then
turn on the A/C switch to activate the air
A/C system
turn off the air conditioner if the engine is
overheat.
Forced cooling
conditioner. After the air conditioner
In the hot weather, if the vehicle is
turns on, the indicator lights. Press the
exposed to the sunshine for a long time,
A/C switch again to turn off the air
open the window for a short time to make
conditioner. When the blower knob is
the interior hot air discharge rapidly.
in ‖OFF‖ position, the compressor of
A/C system doesn’t work.
A/C switch: ON
A control system consists of ventilation,
Inner/Outer circulation control lever:
heating and cooling parts. This system
(
can proovide a maximum comfortability
)
Air flow distribution knob: (
)
no matter what the weather is.
Temperature control knob: Turn it to the
The refrigeration unit of the A/C system
cools the air and removes the moisture
and dust, such as flower powder, etc.
A/C switch
68
end in the anticlockwise direction
! NOTICE:
(Blue)
When the vehicle climbs a long slop or
the traffic is busy, turning on the air
Blower knob: Max Speed
Ventilation and A/C System
Betweenn the blue (cold) and red (hot).
Blower knob: Optional
Head and foot
It is normal cooling when the vehicle
It is used to the transition period, such as
travels for a long distance and travels at
exterior temperature low, no sunshine.
high speed.
When adjusting the temperature control
Ventilation
knob between the cold (blue) and hot
The exterior air flows into the interior of
(red), the hot air flows into the lower area
vehicle via the central and side vents
Inner/Outer circulation control lever:
of the vehicle while the cold and normal
A/C SWITCH: OFF
(
air flows into the upper space of the
A/C switch: ON
)
Air flow distribution knob: (
(
)
) or
Inner/Outer circulation control lever:
interior.
(
Air flow distribution knob:
Temperature control knob: Blue
Inner/Outer circulation control lever:
Blower knob: Optional
(
)
Air flow distribution knob:
Temperature control knob:
69
)
A/C SWITCH: ON or OFF
(
)
Temperature control knob: Blue
(
)
Blower knob: Optional
(
) or
Ventilation and A/C System
the window frosts or becomes wet, turn
Blower knob: Optional
off the inner circulation switch. The
―forced heating‖ is applied only to rapidly
increase temperature, and then returns
back to the ―normal heating‖ ASAP.
Defrosting
Forced heating
A/C SWITCH: OFF or ON
A/C SWITCH: OFF
Inner/Outer circulation control lever:
Inner/Outer circulation control lever:
(
(
)
Air flow distribution knob:
(
)
Temperature control knob: Turn it to the
end in the clockwise direction
Blower knob: Max Speed
!NOTICE:
Normal heating
(
Inner/Outer circulation control lever:
)
DO NOT use the ―foced heating‖ for a
Air flow distribution knob:
long time so as to avoid that the interior
(
air deteriorates and the window frosts. If
Temperature control knob: Red
70
Air flow distribution knob:
A/C SWITCH: OFF
(
)
)
)
Temperature control knob: Red
Blower knob: Optional
(
) or
(
) or
Ventilation and A/C System
Inner/Outer circulation control lever:
exterior air and windscreen to make the
Outer circulation (
internal surface of windscreen frosting
)
Air flow distribution knob:
(
and affect the eye reach.
)
Temperature control knob: in the red area
Rinsing the inner
Operation prompt on cooling
system
surface of window glass with the cleaning
If the vehicle is directly under sunshine,
agent is an effective method to avoid the
open the window before the air conditioner
frosting. Dip the agent with the absorbent
turns on.
Blower knob: Appropriate position
NOTICE:
! NOTICE:
Turning on the air conditioner can
improve the defrosting efficiency. In case
of cooling, if it is a very rainy weather,
(1)
cotton or soft cloth, and apply it on the
DO NOT use (
) or (
) position,
otherwise it may result the difference of
temperature between the exterior air and
windscreen to make the internal surface
of windscreen frosting and affect the eye
reach.
internal side of front/rear windscreen
(including the windscreen at the rear-view
mirror). After drying, utilize the soft dry
colth to clean the fiber remained on the
on the air conditioner to redcue the interior
temeprature which is effective in both rainy
and high temperature weather.
When driving in a busy traffic area, the
windscreens during applying.
(2) In case of cooling, if it is a very rainy
frequently parking and driving at low speed
may make the cooling system not fully
Defrosting
weather, DO NOT use (
A/C SWITCH: ON (pressed down), the
position, otherwise it may result the
working indicator lights.
difference of
71
In the rainy day, clean the window, and turn
) or (
)
temperature between the
work.
If the A/C system hasn’t
been used for a month or
Ventilation and A/C System
more, operate the engine
at the idle speed and turn
on the air conditioner
even in winter, at least
once every month. with
duration
of
several
minutes so as to keep the
appropriate lubrication
and sealability of engine
and extend the service
life of the system.
After the blower knob is in OFF position,
the compressor of the A/C system doesn’t
operate.
72
Door Lock & Theft Prevention
Chapter 6
73
Door Lock & Theft Prevention
Door Lock & Theft Prevention
Door Lock &
of vehicle, DO NOT leave the key code
plate in the interior of your vehicle.
The code plate shall be placed in a
safety location, and its code is recorded.
Please DO NOT pleace the code record
into the interior to avoid that the
unauthorized person gets the code and
then duplicate the key.
Theft
Prevention
Key
The two keys equipped are applicable
for all lock holes on the vehicle, one of
which is used as a spare key. The key
code plate is attached to the cover of
number plate. For the sake of the safety
74
Before leaving the vehicle,
please lock all doors and
luggage boot lid in case of
unattended condition..
Unlock
Lock
1. DO NOT leave the key in
the vehicle.
2. Lock your vehicle.
3. Carry the key with you.
Door lock
The door lock pushbutton located at the
Unlock or lock the front doors with the
edge of window can be used to lock or
key attached with the vehicle when you
unlock the door when you are sitting
stands in the extrior of vehicle. Turn
in the interior of vehicle.
the key in the anticlockwise direction
Apart from the left front door, all doors
to open the door while turn the key in
can be locked at the exterior by
the clockwise direction to close the
applying such the operation as pressing
dooro.
the door lock pushbutton and then
Door Lock & Theft Prevention
closing the door.
controller while you leave your vehicle.
When leaving your vehicle, lock the
Central door lock (
Child lock
)
left front door from the exterior of the
vehicle with the key only.
The central door lock is controlled by
the driver-side door (left front door).
The front door can be locked/unlocked
by using the key from the exterior. The
door also can be unlocked by using
door handle from the interior of the
When the driver-side door (left front
door) is unlocked or locked with a key
or door lock pushbutton, all doors can
be unlocked or locked at the same time.
vehicle.
To lock the rear doors, turn forwards
Before leaving the vehicle,
please lock left front door in
case
of
unattended
condition..
the safety switch and close the doors
while you leave your vehicle. However,
for the safety consideration, it is the
best to lock the door with a remote
Unlock
Lock
Child Lock
Any rear door of a vehicle is equipped
with a child lock which can prevent the
rear passenger(s), especially child from
opening the rear door at the interior by
accident with a door inner handle on
the door.
Press downwards the metal lock tongue
under any rear door lock. In this case,
75
Door Lock & Theft Prevention
this door can’t be opened when you are
doors only.
sitting in the interior, and the door
inner handle is also secured to the
fastening position, i.e., the child lock is
Open the trunk lid
locked up, the door can’t be opened
Insert the key into the key hole, and
with the door inner handle.
turn the key in the clockwise direction
Pull upwards the rear door child lock
to open the trunk lid (i.e., luggage boot
switch and then activate the child lock.
lid). Lay down and forcefully push the
In this case, the rear door can be
trunk lid to reliably close and lock the
opened from the exterior of vehicle
lid
only. Pull downwards the rear door
In the hot whether, the
interior temperature raises
quickly after the engine stop
operating. If the human being or
animals is in the high-temperature
environment, although the time is very
short, they also may be injured and
even die (including the brain die). The
infant is especially dangerous. Thus,
you shall check your vehicle before
locking the doors, and do not leave the
infant or animal in your vehicle.
Fuel filler cap release
lever
child lock switch, and then deactivate
the child lock function.
The unlocking position of the child
lock is shown in the figure above. Pull
upwards the child lock control lever,
and then activate the child lock. The
child locks are secured to the two rear
76
The exhaust gas is harmful.
Please shut down the engine
to avoid the entrance of
exhaust gas into the driver’s cab when
the trunk boot lid opens.
Door Lock & Theft Prevention
Open the engine hood
pull bar, and pull upwards engine
hood at the same time. Pull up the
release handle to unlock the
engine hood lock.
Pull up the release lever at the left side
3.
of driver’s seat to open fuel tank refiller
Lift up the engine hood, and then
support it with the support bar.
cap.
4.
While closing the engine hood,
lower it to a position 20-30 cm
1.
away from the engine hood lock,
The pull handle of engine hood is
and then fall the hood down into
located at the lower left of
As shown in the figure above, the tank
instrument panel. Pull backwards
cap screwed off can be put on the fuel
the lever to make the engine hood
filler cap.
bounce a little.
2.
the latch. In this case, the engine
hood closes.
Get to front of the vehicle and
insert your hand through the
lower front of the engine hood
and touch the pull bar of the
engine hood, push upwards the
77
5.
After the engine hood closes, the
Door Lock & Theft Prevention
engine hood must be lift upwards
to determine whether the engine
The remote controller covers approx. 6
hood lock is fully engaged.
m. If the distance between the vehicle
and the remote controller is beyond this
Remote keyless system
with anti-theft function
( )
The purpose of this system is to
prevent an unauthorized person from
unlocking the doors, trunk lid and
engine hood.
If any door, engine hood and
trunk boot lid are fully
closed, pressinig down the
LOCK button on the remote controller
can’t get the anti-theft state.
No access to the anti-theft system is
accompanied by the following
instances:
① The left and right turn signal lamps
flash twice in succession.
c The anti-theft indicator lamp doesn’t
light.
78
value, the remote controller cannot
operate properly.
Locking and unlocking of a
door
When pressing the LOCK button
on the remote controller once, all doors
are locked, and the turn signal lamp
flashes once at the same time. And then
the theft prevention is activated.
When pressing the UNLOCK button
on the remote controller once, all
doors are unlocked, and the turn signal
lamp continuously flashes twice at the
same time, and then the anti-theft
system is disactivated.
If the frequency of your
remote
controller
is
disturbed,
you
cannot
unlock the locks, and then you can
lock/unlock them directly by using
the engine
the key.During
Otherdriving,
short-range
radio
hood(such
must be
transmitters
as reliably
amateurlocked.
radio
it is found
that the engine
station, Ifmedical
equipment,
radio
hood
is not fully
during
driving,
earphone,
otherclosed
remote
controllers,
you
stop may
your
vehicle
alarm shall
system etc.)
also use
the
immediately
and properly
close
the
working frequency
of your
remote
engine
hood.
controller,
WARNING:
If any unauthorized person has an
If the
or
button
on the remote controller is
pressed down by accident (it is
unnecessary to make the key directly
face to the vehicle. For example, the
key is in your pocket), the door will
open..
attempt to forcedly open the door, trunk
boot or engine hood, the left/right turn
signal lamp will continuously flash for
Door Lock & Theft Prevention
28 s.
Replace the battery
remote controller
of
If the coverage of remote controller
reduces gradually, replace the battery
(battery type: 3V CR 2032).
The anti-theft system can
enter into the anti-theft state
only while all the doors,
engine hood and trunk lid fully close.
After the body is in the normal
anti-theft mode, ① four doors are
locked; ② the anti-theft indicator
light in the front of instrument panel
continuously flash.
The battery is replaced according to the
unit in the reverse order of
following procedures:
removal.
1.
2.
Open the remote controller unit
The lithium battery can’t be
from the side fastener with a flat
disposed as the common domestic
head tools.
wastes. Please dispose the used battery
Carefully unclench and take off
in accordance with the regulations on
the battery. Install a new battery
environmental protection.
on the position between two
contacts with the symbol (+)
facing upward.
3.
Reinstall the remote controller
The chip, built in each key, integrates
the key, electronic anti-theft equipment
and engine computer into one entity,
which forms an active theft preventive
system. If one person has made one key
matching with the vehicle key in the
After the key is opened, the
chip in it cannot be thrown
away; otherwise the engine
cannot be started.
shape without the permission of the
owner while this key has no chip
containing information the same as the
anti-theft
Electronic anti-theft system
equipment
and
engine
computer, the engine cannot be started
by using this key, which reduce
The electronic anti-theft system is
directly
engine-oriented,
probability of the vehicle loss.
which
considerably improves the complete
79
safety of vehicle theft prevention.
In the event that you have lost your
Door Lock & Theft Prevention
vehicle key by accident, you shall go to
the CHERY Authorized Service Station
A.S.A.P. to make a new key matchable
with your vehicle key. The Service
Station has the special electronic
equipment which can be used to make
a new key for your vehicle and
invalidate your lost key.
80
Seat and Safety Protection
Chapter 7
81
Seat and Safety Protection
Seat and Safety Protection
Seat and Safety Protection
Front Seat
82
Rear Seat
Seat and Safety Protection
Seat and Safety
Correct sitting posture
when driving, and his/her legs also
shall bend slightly so that he/she
The seats, head restraints, seat belts and
can step on the pedal to its extreme.
airbags all are helpful to protect the
passengers. If you make the best of them,
Protection
The shoulder belt shall go through
the center of your outside shoulder,
protection. Thus, please stand to the
hug closely and cross slantways
following:
through your chest. Do not make

the belt cross through your neck.
Use the erect sitting posture. The
lower part of back is backward as
Seat
soon as possible, and the inclination
of the back of seat shall not be
more than 25 degrees.

Properly adjust the head restraint to
make the top of head restraint flush
with the upper part of your head.

DO NOT make the front seat close
excessively to the instrument panel.
The driver shall hold the steering
wheel with the slightly-bent arms
83

they would provide you with much more
The waist belt shall hug closely and
cross through your hip other than
your stomach.
Adjustement of driver-side
seat
Seat and Safety Protection
backrest. Adjust the backrest to the
your desired angle, and then place
down the handle seat to secure the
Knob
seat backrest.
Handle
If the seat is adjusted during
driving, it may result that
the vehicle is out of control.
So, the seat can be adjusted only when
the vehicle stops.
There are an adjusting knob and an
adjusting handle at the outside of
driver-side seat cushion, and its specific
functions are as follows:
Knob: suitable for adjusting the lifting of
seat cushion.

cushion while turn the knob in the
anticlockwise direction to fall down
the cushion.
Handle:
applicable
to
adjust
the
inclination angle of seat backrest.
Pull upwards the handle to change
the
84
front
Turn the knob by hand in the
clockwise direction to lift up the

Adjustment
of
passenger-side seat
inclination
angle
of
seat
Adjust the inclination angle of
front seat backrest
Please enable your body to contact the
seat
backrest, and then pull the
adjusting handle of right backrest of the
seat. Change the inclination angle of your
body to adjust the backrest to your
desired angle. (The adjusting handle of
driver’s seat backrest is located at the left
side of seat.)
Adjust
the
forward
backward sliding of seat
and
As shown in the figure below, pull
upwards the adjusting lever located at the
outside front edge of seat to move the
Seat and Safety Protection
seat forwards and backwards. After the
vertebrae if your vehicle is impacted by
height according to her/his body height
seat is adjusted to its proper position,
the
so that the head restraints can effectively
release the adjusting lever, and then
However, the head restraint can be able
swing forwards and backwards the seat
to protect you only when it is adjusted to
to confirm whether the seat is fastened to
a correct position.
Method to
restraint:
Front head restraint
Press and keep the spring clamp, and pull
other
vehicle
during
driving.
the slide rail.
Seat Adjusting
Lever
Spring clamp
protect you.
adjust
the
head
upwards or push downwards the head
restraint to its proper position;
The optimal height of a head restraint is
to make its top flush with the top of your
head.
Method
to
disassembly/reassemble the head
restraint:
When the head restraint is disassembled,
Head restraint
The head restraint can restrict your head
movement to protect your cervical
85
There are some height-adjustable head
press the spring clamp located at the
restraints installed on the backrests of
outside of head restraint’s guide member
front seats. The occupant shall adjust the
by hand, and, at the same time, pull out
head restraints of seats to the proper
the head restraint from the guide member;
Seat and Safety Protection
the figure, and then fold the rear backrest
in the direction of arrow as shown in the
figure.
when the head restraint is reassembled,
the head restraint of front/rear seat shall
be differentiated firstly (the head restraint
of front seat is big while the head
restraint of rear seat is small), and then
Return the rear seat
push the pin of head restraint into the
Lift up the seat backrest in the direction
guide member until the spring clamp on
as shown in the figure. DO NOT apply
the guide member engages with the pin
too big force so as to avoid the damage
properly.
of angle regulator of seat backrest.
Rear head restraint
The adjustment method of rear head
restraint is the same as that of front head
restraint.
Rear seat
Fold the rear seat
Pull upwards the ―ring-pull‖ shown in
86
CAUTION: DO NOT
remove the head restraint
or adjust it too low for fear that your
neck is injured due to the shortage
of supporting your head when an
impact accident occurs. The head
restrain shall be adjusted to its
proper position.
Seat and Safety Protection
The driver and passanger
sitting in the front seats shall
wear the seat belts when
driving. Avoid to put on too loose
chothes. To get the best protection
effect, the seat belt shall be tightly
contact your body.
Deliver the luggage
If the goods must be placed in
your vehicle, please reliably
secure it to avoid
its moving.
CAUTION:
In case
that the
luggage and other goods are
piled up, its height shall not exceed the
height of front seat.
DO NOT sit on the back of folded seat
during the vehicle is travelling. When
the vehicle suddenly stops or a traffic
accident occurs, the luggage unbound
on the back of folded seat or the
passenger without any protection device
may impact all-round in the interior or
is thrawn out to the exterior. It may
result serious injury or death.
87
Fold the rear seat to make the rear
of vehicle have space enough to
store the luggage.
Seat belt
The seat belts/child safety seats must be
applied at any moment. DO NOT share
one seat belt with two or more persons at
the same time. Make sure that the belt is
fastened well, without looseness,
distortion, and barrier.
Seat belt warning light
The warning light shall light when the
The luggage and other
loaded goods shall be places
in the front part of boot as
soon as possible. It is very dangerous
that the vehicle is running under the
condition of the tail door open. In the
case, the excessive exhaust gas will be
inhaled into the vehicle through the tail
door opened.
Seat and Safety Protection
Maintenance of seat belt
ignition switch turns on. The light will
keep lighting to remind that the
passengers shall wear their seat belts.
This light extinguishes after wearing the
driver-side seat belt.
Fasten the seat belt
Pull out the belt smoothly and steadily.
The belt may be locked if the pulling
force is too large or the vehicle is in a
slope. The seat belt shall be placed on the
center of your outside shoulder. The
waist part of the belt shall adhere to your
hip tightly other than your stomach.
To release the seat belt, press the red
button on the belt buckle and smoothly
retract the belt.
Make sure that each seat belt is equipped
with a proper belt buckle.
Two-point seat belt at the
center of rear seat
88
Seat belt check
The length of this seat belt can’t be
adjusted automatically. During the use of
the belt, insert the tongue plate into the
clamp until you hear the click sound, and
then manually adjust its length to make
the belt tightly contact your hip.
Insert the tongue plate into
the belt buckle until you can
hear the click sound.
Otherwise the seat belt is improperly
locked.
If it is difficult to pull out the
belt, please pull it once by
force and then release it. To
do so, the seat belt can be smoothly
pulled out.
Seat and Safety Protection
Clean the seat belt
Please DO NOT try to repair
or lubricate the retractor for
seat belt or the belt buckle
mechanism. Please do not amend the
safety belt by any means, otherwise
any problem caused hereto is without
warranty provided by CHERY
Automobile Co., Ltd.
CAUTION:
Use the interior cleaning agent or fresh
Regularly check whether the seat belt is
warm water to clean the seat belt and
damaged or worn or not.
make it dry naturally. DO NOT employ
The belt stretched (e.g. after a traffic
the manual heating method to dry the
accident) shall be replaced immediately
belt.
by the CHERY Authorized Service
Station and the relevant parts shall be
Airbag ( )
checked.
Employ the airbag together with the
safety belt to help reduce the possibility
of the serious injured in the major impact
accidents.
89
The airbag will give out some loud
sounds when air charging. In addition,
there are also some harmless smoke-like
powder residues. The both are the normal
phenomena.
Please DO NOT use the
chemical cleaning agent,
boiling water, bleaching
agent or coloring agent to clean the
seat belt. Please DO NOT make the
water penetrate into the retractor
mechanism of the seat belt.
Seat and Safety Protection
The seat and backrest shall be positioned
correctly to work together with the airbag
to get the best protection effect. Use the
The passenger in the front seat can be
erect sitting posture and make the lower
effectively protected only when he/she
part of your back adhere to the seat
take an erect sitting posture A.S.A.P.
backrest tightly as soon as possible,
axle center or within the range of left and
right 25 degrees departure from the
center) will create the explosion of airbag.
grasp the steering wheel with slightly
Fasten the belt at any
moment and keep a proper
distance away from the
steering wheel.
Only using Take
the safety
Very Dangerous!
care
belt can ensure
yourthe
body
is in the
not tothat
apply
rear-facing
position that
the airbag
child
seat is
onabletheto exert
seat
its optimalwith
effect
equipped
the front airbag!
bent arms during driving. This is an ideal
Within the one several thousandth of a
drive posture, which helps to reduce the
second after an impact occurs, the airbag
possibility of the driver injured when the
charges and swells up. It will discharge
airbag swells up
and damp the frontward movement of a
which the caster angle of the backrest
Front airbag
The severe frontal impact (on the front of
shall not be more than 25 degrees. Please
do not make the front seat close to the
instrument panel excessively. You shall
passenger when it touches the body of
the passenger. For the slight impact,
rollover and rear/side impact, the front
90
Seat and Safety Protection
airbag will not explode.
of airbag installed on the vehicle that the
airbag shall be replaced after the use of
10 years. Up to that time, both the
Airbag warning light
efficiency of aerating agent and the
performance of airbag have deteriorated.
If you do not know the service life of
your vehicle/airbag, you can contact the
When the ignition switch is turned to the
ON position, the indicator light on the
instrument
panel
lights
and
extinguishes after approximate 3 -4
then
s to
indicate that this system can be operated.
CHERY Authorized Service Station to
inquire the relevant detailed data.
Child safety seat
manufacturer’s instructions before the
keeps intermittent or continuous lighting
child safety seat is installed.
occurs. For the sake of your safety,
please get to the CHERY Authorized
Service Station to check your vehicle
It is recommended by the manufacturer
91
The airbag system shall be handled only
by the CHERY Authorized Service
Station.
Please carefully read and follow the
If the indicator light doesn’t light, or if it
during driving, it indicates that a trouble
Very Dangerous! Take care
not to apply the rear-facing
child
for the
seat
Keep seat
the clearance
space
at
equipped with
themoment
front
airbag!
any
in thewheel,
front
The
steering
When the front
seat
toairbag.
use a child
area
of has
thecolumn
DO
steering
and
safety
forany
thesystem
vehicle
the
NOTseat,
place
obstruction
in this
airbag
are with
repaired
PAB
function,
the PAB
arealockup
orbyitsthe
upper.
only
technicians
whoswitch
have
shall
be turned
to OFF position
to
taken
the special
training.so as
The
make
the
front
passenger
side
airbag
unexpected explosion of airbag may
outresult
of service.
(Referoftooccupants.
Operation &
in the injury
Adjustment of Interior Devices of this
manual.)
Please DO NOT hold the
child on your lap during the
vehicle is travelling.
Seat and Safety Protection
For the child whose age is less than 12
seat on the rear seat.

The little child whose age is below
years or whose height is below 150 cm, a
4 years and whose weight is
special child safety seat (such as infant
between 10 to 18 kg shall sit in the
seat, child safety seat or heightened
child safety seat on the rear seat of
cushion and etc.) must be applied and
the vehicle.
carefully secured.
The child safety seat must be applicable
and approved by the government.
This kind of safety seat is used together
with the seat belt to help us provide the
Drive Direction
utmost safety for our children.

The infant whose weight is less
than 10 kg or whose age is below
Drive Direction
one year shall be placed in the
infant bed of rear seat so as to make

the infant take a horizontal position
child shall sit on the rear seat with
in the bed and to constraint or
secure
the
infant.
The
best
protection method for the infant is
to use the rear-facing infant safety
92
The 4 to 12 years old or 18 to 36 kg
the
Drive Direction
heightened
cushion.
The
adjustable auxiliary safety belt
fixed on the heightened cushion can
Seat and Safety Protection
be able to ensure that the diagonal
belt crosses the shoulder properly.
The heightened seat position can
ensure that the adult seat belt is
correctly led to go across the center
of shoulder other than the neck, and
the waist safety belt tightly contact
he lap other than the stomach.
Drive Direction
93
Any a safety seat is limited to
a infant.
Based on the provisions of
road traffic safety laws, it is absolutely
prohibited that children sit on the front
seat. The safety seats applicable shall
be available for children.
Audio System
Chapter 8 Audio System
95
Audio System
NOTICE: If this vehicle is equipped with the audio systems which are NOT indicated below, please
carefully read the audio instrucation manual accompanied with the vehicle.
CD Panel (
)
96
Audio System
Panel Description
1.
USB sound module (switch sound module) button
12.
Preset button 3 (Radio)
2.
FM/AM(Radio FM/AM band switch) button
3.
CD(CD play selection) button
13.
Preset button 6 (Radio) /DISC
4.
CD entrance
14.
Preset button 2 (Radio)
5.
LCD display
15.
Preset button 5 (Radio)
6.
Exit button
16.
Preset button 4 (Radio) /DISC
7.
AST (Automatic Storage) button
17.
Preset button 1 (Radio) / RANDOM button
SET (press it for above 2 s to set) button
18.
High frequency search (radio)/Fast forward/Play (CD play
8.
SCN (Radio frequency/CD play track scan) button
19.
MUTE button
9.
USB data interface
20.
Low frequency search (radio)/Fast Backward/Play (CD play)
10.
Search next (CD play)
21.
SEL (Sound Effect Mode Selection) button
11.
Search previous (CD play)
22. Power Switch/Volume (Knob) Button
REPEAT button
select the previous disc (CD Cartridge)
select the next disc (CD Cartridge)
97
Emergency Assistance
Method of Operation
Basic Operation
NOTICE:
Please refer to the front view in the Section ―Description‖ to read this chapter.
WARNING:
Please decrease the volume of sound prior to turn off the ignition key or the main power supply. This machine can memory the
finial setting value of volume prior to shut down the machine. If the volume is very high prior to shut down the machine, the
sudden high volume may hurt your ear or damage your machine when you startup the machine again.
Turn ON or OFF power supply
NOTICE:
If the engine of the vehicle doesn’t start up, you shall take care of the long time operation of this machine, because the vehicle will
fail to start up if the battery wears out, what’s more, the service light of the battery may shorten due to the long time operation of
this machine.
99
Emergency Assistance
Press the POWER button to turn on/off the machine.
Select the mode
1.
Press the FM/AM button to select the required band.
2.
Press the CD button to select the CD play mode.
3.
Press the USB button to select the USB sound module play mode (after connecting the
).
Adjust the volume
Turn the knob in the clockwise direction to increase the volume; and turn the knob in the anticlockwise direction to decrease the
volume.
-Please ensure that you still can hear the traffic signals (whistle, alarm,……).
NOTICE:
This machine can automatically adjust the volume after POWER ON:
1. When the volume exceeds 12, automatically adjust the volume to 11 after the next power ON of the machine.
2. When the volume is below 12, keep the volume constant after the next power ON of the machine.
3. When the volume is 0, automatically adjust the volume to 12 after the next power ON of the machine.
100
Emergency Assistance
Adjust the bass
1.
Press the SEL button to select the ―BASS‖.
2.
Turn this button in the clockwise direction to increase the bass; and turn the button in the anticlockwise direction to decrease
the bass.
*Its value is set as ―0‖ prior to leaving factory.
The range of adjustment: -7 to +7.
3.
After the completion of adjustment, press the SEL button for a long time to fulfill the setting.
Adjust the treble
1.
Press the SEL button to select the ―TREB‖.
2.
Turn this button in the clockwise direction to increase the treble; and turn the button in the anticlockwise direction to
decrease the treble.
*Its value is set as ―0‖ prior to leaving factory.
The range of adjustment: -7 to +7.
3.
After the completion of adjustment, press the SEL button for a long time to fulfill the setting.
101
Emergency Assistance
Adjust the balance
1.
Press the SEL button to select the ―BAL‖.
2.
Turn this button in the clockwise direction to increase the volume of right speaker; and turn the button in the anticlockwise
direction to increase the volume of left speaker.
*Its value is set as ―0‖ prior to leaving factory.
3.
After the completion of adjustment, press the SEL button for a long time to fulfill the setting.
Adjust the fade
1.
Press the SEL button to select the ―FAD‖.
2.
Turn this button in the clockwise direction to increase the volume of front speaker; and turn the button in the anticlockwise
direction to increase the volume of rear speaker.
*Its value is set as ―0‖ prior to leaving factory.
3.
After the completion of adjustment, press the SEL button for a long time to fulfill the setting.
Loudness function
The loudness effect adds the woofer and bass to create the natural tone. This function is automatic.
102
Emergency Assistance
Method to Operate the Radio
Tune into broadcasting
1.
Press the FM/AM button to select the Radio mode.
2.
Press the FM/AM button to select band, and when you press the FM/AM button, the button will convert according to the
following sequence:
FMFM1FM2AMFM….
3.
Press the button  or  to tune the radio to find out your required radio station.
Frequency scanning
The frequency scanning function enables you to listen to the first 10 seconds of program of each current band of local radio station.

Press the SCN button to open/close the frequency scanning function.
Automatic search

Press the button  to tune into the lower-frequency radio station.

Press the button  to tune into the higher-frequency radio station.
- Press the button or  again to search another radio station
103
Emergency Assistance
Station Search sensitivity (for FM band only)

The Local/Remote mode switch is available. The specific method of operation is as follows:
1.
Press the button SET for at least 2 seconds to enter the SETUP menu.
2.
Press the button
3.
Press the button SET to change the setting LO/DX.
4.
Press the button SET for at least 2 seconds to exit the SETUP menu.
or
to select the SRCH option that you want to change.
Manual tuning
Please switch to the manual tuning mode, which the specific method of operation is as follows:

1.
Press the button SET for at least 2 seconds to enter the SETUP menu.
2.
Press the button
3.
Press the button SET to change the setting AUTO/MAN, and set to MAN.
4.
Press the button SET for at least 2 seconds to exit the SETUP menu.
or
to select the TUN option that you want to change.
Press the button  to tune into the lower-frequency radio station.
104
Emergency Assistance

Press the button  to tune into the higher-frequency radio station.
Automatic storing (AST)
You can store 6 powerful FM radio stations in the FM AST band or store 6 radio stations in the MW (AM) AST band. When you
use the automatic storing function, the radio stations that are originally stored in the FM AST or MW (AM) AST band will be
covered.

Press the button AST to enter the automatic storing mode, subsequently,
-- the machine give out a sound of ―Hua‖, and then mute, the display starts to flash.
-- after the completion of storage, you will hear a sound of ―Hua‖ again, and the display stops flashing.
-- The stations are stored in the Preset button 1 through 6.
-- Sometimes, it is possible that the stations available are less than 6 radio stations.
Preset and store
Use the preset buttons 1 through 6 to store 6 radio stations in each band.

Tune to the required radio station.

Press the required Preset button for at least 2 seconds and hear a sound of ―Hua‖, it indicates you can store the current radio
station into the preset button.
105
Emergency Assistance
Method to operate the CD player
CD play

Make the disk enter the CD entrance, and there is the word ―LOAD‖ in the display of the machine, and then the machine
begins to play.

Screen display:
-- Sound effect mode (if selected)
-- CD play symbol
-- Current track number, time elapses.
Track scanning
The track scanning function enables you to listen to the first 10 seconds of contents of each track.

Press the button SCN to enter the track scanning mode
-- Press the button SCN again to exit the track scanning mode.
Previous/Next play

Press the button
or
to select the next/previous track.
= to next track
106
Emergency Assistance
= to previous track
-- Start to play the track after the completion of selection.
Fast Backward/Forward

Press the button or  to fast backward or fast forward the selected track.
-- Press this button again to make the machine return to the normal play mode.
Random play

Press the RANDOM button to enter the random play mode.
-- Press the button to exit the random play mode.
Repeat play

Press the REPEAT button to enter the repeat play current track mode.
-- Press the button again to exit the repeat play mode.
Eject disc
Press the EJECT button to exit the disc.
CD maintenance

Please don’t leave your finger mark on a disc.
107
Emergency Assistance

After a disk ejects from the machine, please place it into the CD box to prevent from damaging or foreign particles.

Please avoid CD heating or exposing to long period of direct sunshine.
Method to Operate the MP3(USB) Player
Connect the moveable storage device which stores the mp3 muisc to the
MP3 play mode.
interface, and press the USB button to enter the
Track scanning
The track scanning function can search and play the first 10 seconds of contents of all music on this disc.

Press the SCN button to enter the track scanning.
-- Press the button SCN again to stop the track scanning.
Previous/Next track

Press the button
or
to select the previous/next track.
= To the next track
= To the previous track
-- It starts to play the track after the completion of selection.
108
Emergency Assistance
Fast Backward/Forward

Press the button or  to fast backward or fast forward the selected track.
-- Press this button again to make the machine return to the normal play mode.
Random play

Press the RANDOM button to enter the random play mode.
-- Press the button to exit the random play mode.
Repeat play

Press the REPEAT button to enter the repeat play current track mode.
-- Press the button again to exit the repeat play mode.
Exit the mp3 play
Press the USB button to switch to the original play mode.
109
Emergency Assistance
Chapter 9
Emergency Assistance
110
Emergency Assistance
vehicles that your vehicle goes wrong
Emergency
or the approach to your vehicle is
When the fuel level reaches the
extremely low value, the engine will
dangerous. Press this switch to turn on
or off the flasher. The flasher can still
operate even when the ignition switch
Assistance
turns off.
operate unsteadily, which is acted as an
Partial operation function
The control system of the vehicle’s
Hazard warning flasher
engine
has
the
partial
operation
performance of the engine may decline.
The hazard warning flasher is applied
only under the emergency condition to
the
coming
and
following
additional warning, within the stretch
of time after the low fuel warning light
is ON. Please get to the nearest gas
station to refuel.
function. The engine can still operate
when the system fails. However, the
warn
If the fuel gauge has
indicated that the fuel level is
low or the warning flasher
lights, please refuel immediately.
Refuel in time
The failure to refuel in time
will be able to make the
engine
shut
down
automatically and result the difficulty
Please
get Intothisthecase,
Chery
to start the
engine.
the
Authorized
Service
Station
emergency assistance conducted by the
to make
CHERY immediately
Authorized Service
Stationthe
is
engine
examined.
required. In addition, The failure to
refuel in time may damage the engine.
111
Emergency Assistance
Please take care to properly use
the compressor gun while
fueling.

The compressor gun shall be fully
inserted into the fuel tank. Do not
tilt the gun against the filler
opening.



Please take care to abide by the
bulbs are replaced. However, it may
local related laws and regulations
cause great trouble when no tools are
when you carry the spare canned
available.
fuel with your vehicle
necessary, the light/lamp and the
For the sake of safety, it is
recommended
that
you
don’t
If
the
replacement
is
ignition switch must be turned off
before any bulb is replaced.
carry the spare canned fuel with
DO NOT directly hold the bulb glass
If the automatic compressor gun
your vehicle in order to avoid that
with
is applied, it indicates that the fuel
the fuel tank is damaged and the
fingerprint upon it will be heated and
tank is refilled up once the
fuel spills over to result a fire
volatilizes when the headlamp turns on,
compressor
disaster when a traffic accident
and deposits on the mirror surface,
occurs.
which will darken the reflector.
gun
closes
automatically while refueling. In
the
fingers,
otherwise
the
this case, be sure not to try to
refuel
continuously,
otherwise
Replace the lamp bulb
there is no expansion space inside

the fuel tank. The fuel will spill
Unless it is a very emergent case, it is
over from the fuel tank once the
unallowable
temperature rises.
himself/herself to replace the bulbs of
Please take care to screw up the
tank cap after refueling.
for
an
owner
During the replacement of any bulb,
make certain that the same model of
bulb is applied. Please review the bulb
specification before installation.
the headlamp group since the front
bumper shall be removed before these
112
Emergency Assistance
Bulb of headlamp:
Bulbs of license plate,
parking,
side
12V 55W
directional
Bulbs of turn signal,
backup,
Lamps:
rear
and
The headlamp shall be
aligned after the headlamp
bulb is replaced every time.
The CHERY Authorized Service
Station offers you the best service.
high
mount stop lamps:
fog
12V 5W
Bulb of stop lamp/side
12V 21W
light:
Headlamp group (including
high/low
beam/position
lamps/turn signal lights)
If the damage of bulb results that the
headlamp is out of service, please
replace the corresponding bulb
according to the following procedures.
1.
Open the engine compartment
cover.
2.
Unscrew the protective cover of
low beam or press downwards
the protective cover according to
the position shown in the figure
so as to loosen the retaining clip
of protective cover of high beam
lamp bulb.
3.
Pull out the harness connector
from the bulb, press downwards
12V 21W/ 5W
Bulb of front fog lamp:
12V 55W
113
Emergency Assistance
Low Beam
the clip of bulb holder by hand to
make the clip go across the
locating groove and then separate
the clip to both sides, take out the
bulb and pay more attention to
the locating mark of the bulb.
4.
CAUTION: DO NOT tauch the
surface of new bulb by hand so as
to avoid the influence on the
brightness of bulb. The lighting
system is a safety part. Please
note that any detailed operation
shall
be
correct
when
replacement. If necessary, please
get to the CHERY Authorized
Service Station to make it
repaired.
Tail lamp bulb
Fog Lamp
Position and Stop lamps
High Beam
It is difficult to replace the bulbs of
Turn Signal Lamp
front turn signal and position lamps. If
Backup Lamp
Station in time to make these lamps
If the tail lamp fails to work due to the
damage of its bulb, please replace the
corresponding bulb according to the
following procedures.
repaired.
1.
these bulbs have some troubles, please
get to CHERY Authorized Service
Front fog lamp bulb
Open the tail door, and unscrew
in the anticlockwise direction two
nuts (under the sound isolation
To replace the front fog lamp bulb,
gasket) used to fasten the tail
please get to the CHERY Authorized
lamp from the internal side of
Service Station to replace it.
luggage boot. Then unscrew three
fixing bolts in the anticlockwise
114
Emergency Assistance
2.
direction from the surface of tail
brightness of bulb. The lighting
lamp,
harness
system is a safety part. Please
connector from the tail lamp, and
note that any detailed operation
then take off the tail lamp.
shall
pull
out
the
Unscrew the protective cover of
the bulb in the anticlockwise
direction
according
to
the
position as shown in the figure.
3.
Pull out the harness connector
from the bulb, press downwards
the clip of bulb holder by hand to
make the clip go across the
locating groove and then separate
the clip to both sides, take out the
be
correct
License plate lamp bulb
when
replacement. If necessary, please
get to the CHERY Authorized
Installation position: over the license
Service
plate.
Station
to
make
it
repaired.
1.
It is difficult to replace the bulbs of rear
screws used to fix the license
position and stop lamps. If these bulbs
plate lamp.
have some troubles, please get to
2.
CHERY Authorized Service Station in
draw out the damaged bulb.
3.
High mount stop lamp bulb
CAUTION: DO NOT tauch the
surface of new bulb by hand so as
CHERY Authorized Service Station in
Install a new bulb into the lamp
holder and then install the lamp
holder.
It is difficult to individually replace the
stop lamp bulb. Please get to the
4.
Pull out the lamp holder and then
time to make these lamps repaired.
bulb and pay more attention to
the locating mark of the bulb.
Unscrew and remove the tapping
4.
Secure the license plate with
some tapping screws.
time to make it repaired.
to avoid the influence on the
115
Emergency Assistance
Interior front ceiling lamp
bulb
light shade and then carefully pry
out the light shade.
1.
Turn off the interior lamp.
2.
Replace the bulb.
2.
Insert a screwdriver into the gap
3.
Reinstall the light shade into the
between the lamp housing and
installation hole of the light
the lamp shade, and carefully pry
housing.
Replace the bulb, and reinstall the
reflector.
4.
Reinstall the lamp shade into the
installation hole of the lamp
housing again.
including main fuse and relay is shown
Adjust the headlamp beam
Replacing the relay requires the related
The proper adjustment of headlamp
professional knowledge.
beam directly affects the driving safety.
It is recommended that multiple spare
So, the special device is available only
fuses shall be carried with your vehicle
to adjust the beam. Please pay attention
for emergency use.
to the laws and regulations applicable
Luggage boot light bulb
during adjustment.
Installation position: at the middle of
Fuse and relay
The
CHERY
Authorized
Service
Station has various specifications of
the luggage compartment.
1.
The ignition switch and all
electrical devices shall be
turned
off
before
the
replacement of the fuse and relay
in the figure below.
out the lamp shade.
3.
value. The position of the fuse box that
spare fuses.
The brownout fuse can be identified in
Insert a screwdriver into the gap
The damaged fuse shall be replaced
term of the fuse broken. All fuses are
between the light housing and
with a new one with the same rated
the push-in type ones.
116
Emergency Assistance
Any unauthorized change on
the vehicle electrical or fuel
system can be able to make
influence on the performance of
vehicle and may result a fire disaster or
hazard on security. So, it is
recommended that any work related to
the removal of fuel or electrical system
or to the replacement of relay is
implemented
by
the
CHERY
Authorized Service Station.
Fuse
Cartridge fuse
Replace the fuse
Color Code of Fuse
Color Code of Cartridge Fuse
Color
Ampere
Auburn
5
Brown
7.5
Color
Ampere
Red
10
Green
30
Blue
15
Pink
40
Yellow
20
Yellow
60
117
Emergency Assistance
Your vehicle is accompanied with a
fuse extractor. You can find it in the
fuse box of the engine compartment.
Engine Compartment Fuse Box:
118
Emergency Assistance
This fuse box is located at the right side of the engine compartment, and behind the battery. During checking or replacing the fuse,
loosen the latch of engine hood and then pull up the hood cover to remove the cover of the fuse box (―B+‖ is the primary power of
the fuse box).
119
Emergency Assistance
Replace the wheel
Spare wheel
screws attached to the body are inserted
The spare wheel is stored in the
Park your vehicle in the proper position,
and please make sure that it can’t make
an influence on the traffic and also
Please take care to abide by
the following precautions
before the vehicle is jacked
luggage boot.
Steps to replace a spare tire:
Open the luggage boot, unscrew in the
the tire is replacing.
anticlockwise direction the nuts used to
on the reliable level ground. The
up.
and then tighten the spare tire fixing
can’t endanger your body safety while
Please ensure that your vehicle stands
into any installation hole of the tire,
secure the spare tire
screw in the clockwise direction to
fasten the tire.
by hand, and
then take off the spare tire.
Attached jack
appropriate wedges are applied to
Using the jack to lift up the
vehicle isGroove
suitable for
replacing wheel only. In this
case, DO NOT operate under the
bottom of vehicle.
block your vehicle wheels to further
secure your vehicle, if necessary.
Please make sure that the front wheels
point to the dead ahead.
Please select the P position if the
vehicle equips with the automatic
transmission.
In case that the spare tire or default
wheel is installed, the spare tire fixing
120
Emergency Assistance
The jack is placed in front of spare
wheel stored in luggage boot.
The maximum working load of
a jack is 1,000 kg.
Jack lift point
Remove the wheel
The jack is available to bear the
specified position of the bottom of car
as shown in the figure only. The groove
position of the jack supports the raised
position of the bottom of car.
1.
The jack lift point shall be fully close
to wheel to be repaired.
2.
Turn off the ignition switch.
3.
Please select the P position, in
Make sure that the vehicle parks
on a reliable level ground and the
front wheel points to the dead
ahead.
The jack lift position of rear wheel (the
black block as showin in the figure)
case of the vehicle equipped with
the automatic transmission.
4.
Please let passengers leave the
vehicle.
5.
Use
the
appropriate
wheel
stopper to secure the vehicle to
The jack lift position of front wheel
(the black block as showin in the
figure)
avoid tumbling or slipping, if
necessary.
6.
Insert a flat screwdriver into the
121
Emergency Assistance
gap between the steel ring and
9.
hub cap, and then turn it carefully
to remove the hub cap.
7.
the lift point.
10.
Use a special tool to unscrew the
wheel nuts, as shown in the
11.
figure below.
110±10N•M).
The jack must rise vertically to
4.
Press the hub cap steadily into its
Lift up the vehicle until the wheel
proper position by your both
leaves the ground.
hands.
Remove the wheel nuts and then
5.
dismount the wheel.
Collect the jack and disable
wheel in the reserve order and fix
them.
Install the wheel
6.
1.
Please
get
to
the
CHERY
Service
Station
Push the wheel to the wheel
Authorized
cotter, and screw up the wheel
A.S.A.P. to make the wheel nut
nuts in the clockwise direction,
screwing torque and tire pressure
and then make certain that the tip
examined.
of any wheel nut faces to the
7.
wheel.
Since the spare tire may not be
used for a long time, to keep the
2.
8.
Jack
down
the
vehicle
and
tire, please charge it with the air
Full tighten the wheel nuts with
pressure which is slightly greater
the diagonal tightening mode (the
than
tightening
pressure of a tire.
Place the jack and make sure that
the jack seat stays on a solid
ground.
3.
standard air pressure of the spare
remove the jack.
torque
shall
be
the
normally-used
air
122
Emergency Assistance
Battery
doctor immediately. If the acid
liquor splashes to your skin or
Safety recommendations
clothes, you can use the alkaline
Take care to apply the
following
preventive
measures when carrying the
water (soap) to neutralize the acid
and then clean it with fresh water.
If swallowing the acid liquor, you
battery.
shall see a doctor immediately.

Open flames, sparks and smoking
prohibited. Please prevent from
the sparks when the wiring and
electric operation are conducted.
Please


The battery acid features with
electrodes.
the acid liquid of the battery.
short-circuit
corrosivity. Be sure to wear
gloves and safety goggles.
do
Keep the children far away from
not
The
may
connect
the
resulted
create
the
sparks and make people injured.
Do
not lean the battery because the
acid liquor may flow out from the
vent. If the acid liquor splashes
into your eyes, please clean them
immediately with fresh water for
several minutes and then see a

The battery will release the
explosive gas when charging.

There is the high voltage in the
electronic ignition system. Please
123
Emergency Assistance
DO NOT touch these components
Company. For the right, detailed
disassembly and reconnection, the
in the case of the engine operating
specification of battery, please
vehicle may be indicative of some
or the ignition switch turning on.
enquire the Chery Authorized
abnormal performances during
Service Station.
the initial stage of driving. This is
Disassemble and install
Take care to apply the following
preventive measures when the battery
is disassembled and installed.


cable firstly after the ignition and
all electrical equipment are turned
off.
Your vehicle is equipped with a
12 V, 75 A•h, maintenance-free

lead and acid battery.

Please remove the negative (-)
Please operate carefully and avoid
two
electrodes
of
battery
with a new lead and acid battery
simultaneously or contact the
when replacing the battery. Do
positive electrode and the vehicle
not use the other kinds of
body by accident.
batteries.
The
current
and

When
again, you shall connect the
be the same as that of the old
positive (+) cable firstly, and then
battery
the negative (-) cable.
specification
conform
of
the
to
the
Chery

you can go unheard.
sulfuric acid and lead. DO
NOT discard the battery according to
the requirement of general domestic
waste. Please send it to the local waste
disposal station qualified.
connecting the battery
capacity of the new battery must
or
being adapted to the engine, and
The used battery contains
that the metal tools contact the
The old battery must be replaced
that the engine control system is
After the battery is subject to
124
Engine’s
battery-assisted
method
Emergency Assistance
Connect the down-lead
started. The jumper wire shall be
start
fixed so as to avoid that it contact
the motion parts in the engine
1.
Park the vehicles properly to
In the case that the vehicle battery has
avoid the batteries contacting
no power, the engine of the vehicle can
each other.
start by means of inputting the power
of other vehicle batteries.
2.
The engine is connected to the battery
with the same nominal voltage (12 V)
only. Please use the jumper wire (with
the insulating clip) and the cable with
of the power-shortage battery to
appropriate size. Please DO NOT
the positive (+) terminal of the
remove the battery from the vehicle
DO NOT connect the lead B
to the negative (-) terminal of
the low power battery.
5.
4.
parts of the engine.
Start the engine
1.
Run the engine of the vehicle
equipped with support battery to
make it operate at a proper high
speed.
2.
Start up the vehicle’s engine with
the low power battery. Start up
the vehicle with a low power
battery within 1 minute A.S.A.P.
Connect one end of the lead B to
the negative (-) terminal of the
support battery. And then connect
the other end of the lead B to the
Make sure that the jumper wire
can’t interfere with the operating
support battery.
electrical system.
Support
battery
Shut down the engine. And turn
Low power
off all unnecessary
battery
Low
electrical equipment.
power
battery
3.
Use the lead A to
Support
connect the positive (+) battery
terminal
compartment.
metal part of the engine to be
125
Emergency Assistance
3.
The engines of both vehicles
shall run for three minutes before
the down-leads are removed.
Remove the down-lead

Remove the down-lead B (+) and
then the down-lead A (-).
Please turn on the fan and
electrical heating type rear
windscreen of the vehicle
equipped with low power battery in
order to minimize the voltage surge
during disassembly.
Please DO
NOT light the headlamp to substitute
the
heating
type
windscreen.
Otherwise the surge voltage may
damage the bulb.
The ignition switch of the
vehicle trailed shall be in the
―ON‖ position to make all the
steering wheel, turn signal lamp and
stop lamp work while trailing. There
are no the braking-assisted force and
the steering-assisted force because the
engine is switched off. So, the required
operating physical force shall be
increased correspondingly.
Breakdown trailer
Both the rear and front of the vehicle
are equipped with the trailing ring to
fix the towing rope.
You shall drive your vehicle slowly and
smoothly to avoid the jump of the
vehicle trailed when trailing. The
over-great pulling force of the towing
rope may damage the vehicle.
126
Maintenance and Care
Chapter 10
Maintenance and Care
127
Maintenance and Care
It is essential to implement the
regular maintenance on your vehicle
Maintenance
Services offered by the
CHERY Authorized Service
Station
during the use of your vehicle. Please
strictly maintain your vehicle according
to this manual so as to ensure that your
vehicle can keep the best performance
vehicle.
& care
Only the genuine spare parts and
and good running conditions and
materials can guarantee the service life
effectively improve the service life of
of your vehicle. Here, please specially
your vehicle. It also enables you to
note that: the genuine spare parts are
timely find and clear up the potential
Maintenance and care is classified as
provided by the CHERY Automobile
hazard and avoid the occurrence of an
two
regular
Co., Ltd to the CHERY Authorized
accident. In the subsequent sections,
maintenance which can be done by the
Service Stations nationwide only. So,
the commonly-used examination and
owner, and the other is the scheduled
you can get the genuine spare parts
maintenance methods will be addressed
maintenance, examination, and repair,
from the CHERY Authorized Service
in detail. Please carefully read it.
which shall be done by the CHERY
Stations only.
Authorized Service Station.
The
Please strictly employ the engine oil,
Station is the unique maintenance
gasolinie, brake fluid and antifreeze
service point authorized by the CHERY
fluid which are recommended in this
Automobile Co., Ltd.. The employees
manual. Otherwise it may damage your
in any service station have taken the
categories:
one
is
CHERY
Authorized
Service
128
Maintenance and Care
strict, professional training conducted
by the CHERY Automobile Co., Ltd.
and
offer
you
the
high-quality
Maintenance Sheet below, for your
reference only.)
domestic waste or drain it into the
public drainage system.
The brake fluid, coolant and power
Everyone
shall
concern
about
environment. Please offer your
contribution and shoulder your
responsibility
to
environmental
protection.
after-sales services. If you have some
steering
fluid
reservoirs
are
complaints about the services and work
semi-transparent containers which are
provided by the CHERY Authorized
convenient to the straight and instant
Service Station, please feel free to
check of these fluids.
directly mail or e-mail to us. We will
response to your problem(s) A.S.A.P.
When mailing or emailing to us, please
DO NOT forget to clearly indicate the
General Maintenance
model of vehicle, chassis number,
engine number, mileage, and date of
vehicle delivery in your mail or email.
Itmes you must follow
Regularly check fluid level and refill
oil/fluid. Check the tire pressure, lamps
and brake system. Then check the
warning lights. (See the Scheduled
Clean your car only at the
washing area that does not
damage
the
ecological
drainage system.
The electrical ignition system
Turn
is with
off high
the ignition
voltage. switch
Please
DO NOTtouch
before working
these parts
in the
when
engine
the
engine is operating
compartment.
Even or
if the
the ignition
switch turns
turns on.
off, the cooling fan may
operate automatically. So, please take
care not to let your clothes (tie) to be
caught by the fan or driving belt.
The used engine oil, brake
fluid, anti-freeze fluid, battery
and tire must be disposed by
the qualified waste treatment agencies,
or after consulting the related
manufacturer. DO NOT throw it as the
129
Maintenance and Care
Scheduled
Sheet
Maintenance
ventilation system have no any
NOTICE:
damage and bend symptom.
The A/C system shall operate for at
least 30 minutes every month.
Daily check:
Monthly check:
Check the working condition of all

exterior lamps and interior lights.
Replace the burned or dim bulbs and
ensure that all mirrors are clean.
Coolant level (engine is in the
cold state)

Keep the engine oil, lubricant
grease and oil/fluid out of the
reach of a child. Follow the
safety instructions on the containers.
Avoid the skin contacts the used oil.
Leakage of assy, pipeline, hose
and oil tank
In case of refuelling, pleace
check:

Brake fluid level

Power steering oil level

Engine oil level

Working

Brake fluid level

Windscreen cleaning fluid level

Working conditon of hand brake

Tire pressure and status (in the

Working conditon of horn
conditon
of
A/C
system*
cold state only)

Check all pipelines of crankcase
130
Maintenance and Care
Maintenance Items of the Engine Compartment
Power Steering Fluid Reservoir
Brake Fluid Reservoir
Access Hole for Battery
Maintenance
Engine oil dipstick
Coolant Filler Opening
Windscreen Cleaning Fluid
Reservoir
Auxiliary Coolant Radiator
131
Maintenance and Care
the engine in the cold state. Pull out the
dipstick and clean it with a
flannelette-free cloth, and then fully
insert the dipstick into the tank and pull it
out again.
Engine Oil Dipstick
MAX MIN
Engine oil consumption is affected by
many factors. A new engine reaches the
normal value only after the mileage of
approx. 5,000 KM. More engine oil
might be consumed under the high-load
of engine.
Regularly check the engine oil, e.g.,
when refueling or before a long-distance
journey.
Stop your vehicle on a level surface
before the engine oil check. Turn off the
ignition switch and wait for a few
minutes to let the engine oil flows into
the oil pan (it may spend more time if the
exterior temperature is low or the
temperature of engine does not reach the
normal working temperature). Before the
engine oil check, please DO NOT start up
Engine oil filler cap
The oil refilled shall not
exceed the upper limit.
If the oil level is between MIN and MAX
marks at the lower of dipstick, DO NOT
refill the oil. The hot engine oil may
exceed the upper mark several
millimeters due to its thermal expansion.
If the oil level is at the MIN mark or
below, please refill the engine oil
conforming to CHERY’s specifications
only until the oil level reaches the area
between the MIN and MAX marks.
Please
refer
to
―Capacity
and
Specification Parameters‖ in the manual
for the details.
Turn the engine oil filler cap in the
anticlockwise direction and pull it out to
open the cap. Please DO NOT open the
cap when the engine is operating.
Please DO NOT use any
engine oil additives or engine
treating compound, which is
not only unnecessary but also
sometimes may damage the engine.
And this damage is without the
warranty.
Turn the oil filler cap in the clockwise
direction until you hear a ―Kala‖ sound
which indicates that the cap closes.
132
Maintenance and Care
DO NOT dispose the empty oil
container as the domestic waste.
In case of the disposal of these
containers, please utilize the local waste
treatment facilities qualified.
warning light will light.
Brake fluid
in this manual. Get to the CHERY
refill the coolant until it can be seen
Refill the brake fluid conforming to the
CHERY’s specification only. Refer to
the filler cap in the anticlockwise
―Capacity and Specification Parameters‖
direction, start up the engine and let it
Authorized Service Station to check the
leakage of this system A.S.A.P.
In case that the brake fluid is refilled,
make certain that it is absolutely clean.
Engine coolant reservoir
The brake fluid reservoir is located at the
and MAX marks at the side of the fluid
reservoir. If the fluid level falls down to
the MIN mark, the brake fluid level
operate at the idle speed for about 1
minute, and then shut down the engine.
Please DO NOT let the brake
fluid contact your skin or
eye(s). If this accident
occurs, please wash the affected
position with a lot of clean water and
immediately go to sea a doctor.
When the fluid contacts the
paintwork, please wipe it
with the wet sponge or wash
the paintwork with a lot of clean water.
QQ6 engine has a main radiator and an
auxiliary radiator. When refilling the
coolant, pay attention to the following
methods:
Open the filler cap and continuously refill
Method to refill the coolant at the filler
In
cap: In case of the engine’s cold state and
temperature is high or in case of each
standstill, turn the filler cap in the
maintenance, note that the coolant is
clockwise
refilled in time from the filler cap.
right rear portion of engine compartment.
The fluid level must be between the MIN
viewing from the filler opening. Tighten
direction
and
apply
the
the coolant until it can be visiable
viewing from the filler opening.
case
that
the
engine’s
water
pressure on the cap to open it, and then
133
Maintenance and Care
Please DO NOT mix the
different
colors
and
specifications of coolants.
Method to refill the coolant into an
auxiliary radiator: In case of the
engine’s cold state and standstill,
pull upwards and open the auxiliary
radiator filler cap. The capacity of
coolant refilled must exceed the
MIN mark and below the MAN
mark.
Regularly observe the capacity of
coolant in the auxiliary radiator.
Refill the coolant in time if below
the MIN mark.
The coolant level can be checked through
the semi-transparent auxiliary radiator.
When the engine is in the cold state, the
coolant level shall be between the MIN
and MAX marks.
If it is necessary to refill the coolant
when the engine is hot, wait for 10
minutes first to cool the engine. Loosen
the filler cap one quarter turn to release
the pressure. Wait for a period of time,
and then fully open the cap to refill the
coolant which conforms to the
specifications of this vehicle.
Using the coolant with the proper
concentration can’t only protect the
engine free from be frozen in winter, but
also provide the corrossion protection all
This coolant is a noxious
fluid which can’t be used to
wash your hands or clothes.
Pay more attention to the coolant when
refilling and avoid that the coolant
sprays on any position of the engine. If
the fluid contacts your skin or eye(s)
by accident, please wash the affected
Please
DO NOTgoopen
position and
immediately
to seethea
filler
cap
and
auxiliary
doctor.
radiator cover when the
engine is operating or in case of high
temperature. Otherwise, the coolant
will spray out from the system, which
may result the injury or corrode the
other parts.
the year around. Now, the engine can
operate under very high temperature but
the bad coolant can’t provide the cooling
system the proper corrosion protection.
So, please use the coolant conforming to
the CHERY’s specifications. DO NOT
substitute the coolant with the main
water.
See the ―Capacity and Specification
Parameters‖ for the capacity of coolant
to be freilled.
134
Maintenance and Care
Check the power steering
fluid level
In case that the engine is in cold state, the
power steering fluid level shall reach the
MAX mark.
If the level is below the MIN mark, refill
the specified fluid.
Select the
conforming
specification.
power steering fluid
to
the
CHERY’s
Battery
On the battery, an inspection hole which
can display the status of battery is
available. Please charge or replace the
battery according to the indication in the
inspection hole.
Your
vehicle
equips
with
a
maintenance-free
battery.
It
isn’t
recommended to use the other type
batteries. The current and capacity of a
new battery must be the same as that of
the old one or conform to the CHERY’s
specifications. Please consult the CHERY
Authorized Service Station for the correct
specifications of battery.
Windscreen washer system
The washer system is watered by the
reservoir. If necessary, refill the clean
water and windscreen cleaning fluid
according to the concentration of (1: 20).
Please close the cover of reservoir after
refilling.
135
Maintenance and Care
Check the wiper blade
Slide the tip of your finger on the edge of
a wiper blade to check the roughness of
the blade. The butter, silicone resin and
fuel may enable the wiper blade not to
normally work. It is recommended that
the glass cleaning fluid is applied to clean
Replace the wiper blade
Lift the wiper arm and make it
perpendicular to the wiper blade. To
remove the wiper blade, press down the
retaining clip according to the arrow as
shown in the figure, loosen the wiper
blade and then pull out the wiper arm in
the reverse direction.
Tire
the wiper blade.
Follow the correct tire pressure in case of
high load and driving at high speed. The
shortage of tire pressure may reduce the
stability, increase the rolling resistance,
and quicken the wear of tire, which may
result the traffic accident and injured.
If you have to drive your vehicle on the
edge of a road, you slowly drive it only.
If possible, the wheel shall be
perpendicular to the edge of road and
approach the edge. Avoid the erected and
sharp-edged obstacles. Pay attention not
to scratch the side wall of tire when you
are stopping your vehicle.
Regularly check whether there are
scratches, foreign materials and uneven
wear in the surface of a tire. The uneven
wear of tire tread indicates the wheel
related is not properly aligned.
For the sake of your safety, when
refuelling, please check the air pressure
of tires (including the spare tire) after the
tire cools. Refer to the ‖Capacity and
Specification Parameters‖ in this manual
for the recommended tire pressure.
136
Maintenance and Care
The related regulations specify the depth
of wear of the tire surface. Note that
when the depth reaches the limit of 3mm,
aluminum-alloy wheel rim. Please
contact the CHERY Authorized Service
Station for other type tires and wheel
rims applicable.
a wear strip will appear on the tire tread,
The improper tire and wheel
rim may result an accident
and without the warranty.
which indicates the performance and
safety of tire here considerably reduce
the wheel is different from that of the
original one, it is difficult to display the
proper speed of vehicle.
Snow tire chain
1. The speed of vehicle shal
not exceed 50 KM/h when
the snow tire chain is
and the tire must be replaced.
Dispose the worn tire according
to
local
regulations
on
environmental
protection.
Change the winter tire to summer tire as
soon as road condition permits, which
can reduce fuel consumption and lower
the noise.
Replace the tire
The wheels applicable for your vehicle
are properly selected to provide the best
operation, comfortability and safety of
your vehicle. The above specifications
for the combination of tire and wheel rim
are suitable for the steel or
It is strongly recommended to use
original
tire
or
refer
to
the
recommendations provided by the
CHERY Authorized Service Station when
you install a tire.
If you want to install a
non-standard tire or wheel
rim (e.g., light-alloy wheel
rim or winter tire), please follow the
related instructions or consult the
CHERY Authorized Service Station.
NOTICE:
The speedometer is affected by the
dimension of wheel. If the diameter of
available.
2. Immediately remove the
snow tire chain if the vehicle travels on
the road witout snow.
The snow tire chain is applicable for
summer and winter tires while is used on
the driving wheel (front wheel) only.
When the snow chain is in service, the
driving performance of a vehicle
equipped with an anti-skid system might
be slightly abnormal. Turning off the
system can solve the problem.
To avoid the damage of the full-diameter
wheel cap, remove it before the
installation of the snow tire chain.
Immediately reinstall the wheel cap back
137
Maintenance and Care
to its original position after
disassembly of the snow tire chain.
the
extension reaches a certain level, which
Train belt
The train belt is one of the parts subject
to the most severe stress. So, the belt
vehicle. So, the tension of the generator
DO NOT throw the cleaning materials
belt must be checked once after the
into the domestic waster. Please utilize
mileage of 1,000 KM.
the
1.
meet operational needs.
Turn off the ignition switch and
2.
meet the requirement. For the sake of
belt
is
NOTICE:
facilities
that
doesn’t
damage
the
the clean water is the most important
with your thumb (with the force of
factor to protect the vehicle’s paintwork.
100N)
to
check
the
Max allowable flexibility: 10 mm.
3.
Use the vehicle cleaning area
Press the middle part of the belt
flexibility of the belt:
available in any CHERY Authorized
Service Station.
treatment
ecological drainage system ONLY. Using
approx.
safety, please use CHERY’s original belt
The genuine spare
waste
draw out the key.
When replacing the belt, choosing a belt
with the same dimension only cannot
local
qualified.
Check the tension of driving belt
must be of high quality and reliable to
ONLY.
Vehicle washing
will result an accident and damage your
If
the
flexibility
allowable
exceeds
value,
The cold or slightly warm water
is available only to clean your
vehicle.
the
please
immediately get to the CHERY
Authorized Service Station to make
A train belt may extend after a period of
it regulated.
use, and the belt will be loose when the
138
Maintenance and Care
Automatica vehicle washer
The best method to wash a vehicle is to
employ the brushless washing facilities
available in a good vehicle-washing
workshop.
In
the
the engine. This results considerable
damage
to
the
engine.
So,
the
high-pressure water gun shall NOT aim
at the intake grille when washing.
vehicle-washing
workshop using the high-pressure water,
Clean the headlamp
the high-pressure washer may .spray into
To avoid the damage of the plastic mirror
your vehicle.
of headlamp, DO NOT use the corrosive
Chassis corrosion protection
The
chassis
If using the vehicle shampoo, please rinse
the vehicle with a lot of clean water after
the completion of washing. And then
or
clean
the
mirror
with
sharp-edged articles to clean the cover.
Clean the rear windscreen
clean and dry the vehicle with a dry
cloth.
In case that the vehicle is washed, the
water from a high-pressure water gun
may enter into the intake pipe of a engine
via the intake grille on the engine hood,
and even may enter into the interior of
treated
by
Before entering into the
automatic vehicle washer,
please turn off the heating
wipe the headlamp when the mirror is
drying
been
the corrosion protection of chassis, and
After cleaning the vehicle,
please slightly step on the
brake pedal to eliminate the
moisture from the brake disc during
driving.
abrasives or chemical solvents. DO NOT
Manual washing
has
anti-corrosion process. Regularly check
fan first.
get to the CHERY Authorized Service
Station to make it repaired, if necessary.
In case of cleaning the rear windscreen,
Clean the wheel
to avoid the damage of the heating parts
Cleaning the wheel depends on the
and radio antenna, use a soft cloth ONLY
traveling distance. Clean all wheels once
to wipe the rear windscreen. DO NOT
evey week so as to avoid that the dust
use any solvent or sharp-edged articles to
deposits on the brake. Please use the
clean the windscreen.
wheel shampoo, warm water and soft
139
Maintenance and Care
sponge to clean the wheel. DO NOT use
the abrasive materials to avoid it damages
the special processed surface.
Cleaning products
To get the best effect, please properly use
the cleaning products for your vehicle.
Paint-dropping treatment
Please get to the CHERY Authorized
Service Station to handle the paintwork
damage or slight scratch caused by the
rocks and gravels on the road.
Paintwork protection
Wax your vehicle paintwork once or
twice every year to keep the paintwork
ensure the vehicle paintwork
durable, remove in time
anything harmful to the
paintwork,
e.g.,
bird
droppings, tree excretions, dead
insects, tar spots, salt for removing
snow on road or industrial droppings,
etc.
cotton cloth and a tower, and wipe the
surface with a clean soft cloth. Extremely
dirty surface can be cleaned with a
neutral cleaning agent, such as soap
foaming agent. During the normal service,
it is recommended to care the leather
once every six months with the special
leather-caring agent.
Please use the proper
cleaning material or agent to
clean the leather fabrics
ONLY.
To
Do not make the leather excessive wet,
especially note that water is unallowable
entering into the seams.
Clean the radiator
When polishing the vehicle, DO NOT
let the polishing agent contact
the plastic surface. Otherwise
it will be hard to remove the
agent. Additionally, DO NOT polish
the vehicle under strong sunshine.
After a period of traveling of a complete
vehicle,
the windward
face
of its
condenser and radiator will be blocked by
some inserts, tree leaves and other
foreign materials. In this cae, it may
make an influence on the performance of
A/C and cooling systems, which results
that the A/C system can’t normally work
smooth.
and the cooling system is overheat, etc. If
Leather fabric care
Clean the leather
surface with a wet
so, clean the condenser and radiator.
It is best to clean the front face of
140
Maintenance and Care
radiator once every year. Use the
compressed air or water to clean the
radiator wings and blow out the small
inserts, tree leaves and etc.
The condenser can be rinsed by blowing
the air from the rear to the front via the
radiator. Also wash the condenser with
The radiator wings are the
indispensable parts in the
good thermal conduction. DO
NOT brush the wings, which may
damage the wings and reduce the
thermal condution.
Absolutely DO NOT spray the water
on a hot radiator, which the hot vapour
generated may result the injured.
Wash the radiator only when the
engine stops operating and cools down.
water when the engine cools down.
The pressure of air and water shall not
exceed 150 KPa. The pressure of above
150 KPa may damage the radiator wings.
Regular Maintenance Specifications
Please drive your vehicle to the CHERY Authorized Service Station for regular maintenance according to the specified mileage.
Maintenance Item
Mileage (Km)
141
Maintenance and Care
5000
15000
30000
Lighting, warning flasher devices, horn: Check its performance
★
★
Wiper and cleaning devices: Check its performance, and refill the cleaning fluid, if necessary
★
★
Check the free travel and liquid level of clutch, and adjust it if necessary
★
★
Engine oil: Replace it
★
★
★
Oil cleaner: Replace it
★
★
★
Transmission oil: Check the oil level, quality, color, and refill it, if necessary
★
★
★
Engine: Check the leakage (engine oil, antifreeze fluid, fuel, A/C system, etc)
★
★
★
★
★
Battery: Check the electrolyte level, and refill the distilled water if necessary (equipped with the
maintenance-free battery)
★
Timing belt: Check the wear and tension, and adjust or replace it if necessary
Engine hood hinge and lock body: Lubricate it
★
★
★
Door hinge and door stopper: Lubricate it
★
★
★
★
★
★
★
★
★
★
★
Spark plug: Check it, and replace it, if necessary
Air cleaner: Clean its housing, clear the element, and replace its element, if necessary
★
A/C filter: Check its cleanness, and replace it, if necessary
Ignition timing: Check it
Fuel cleaner: Replace it
★
★
142
Maintenance and Care
Mileage (Km)
Maintenance Item
5000
15000
30000
Wedge-shaped belt: Check its tension, and adjust or replace it, if necessary
★
★
Transmission: Check its leakage or damage
★
★
Dust cap of constant velocity universal joint: Check its damage
★
★
★
Steering tie rod end: Check its free play and the damage of dust cap
★
★
★
Protective sleeve of steering universal joint assy: Check its dislocation or damage
★
★
Hand brake: Check its travel and adjust it, if necessary
★
★
★
★
★
★
Brake lining/shoe: Check its thickness, and replace it, if necessary
Brake disc/drum: Check its working condition, damage, and replace it, if necessary
★
★
Vehicle bottom protector: Visually check its damage
Seat belt: Check its damage
★
★
Toe-in value, wheel camber angle: Check it, and adjust it, if necessary
★
★
Ball pin: Check its clearance
★
★
Rubber rear axle hingle: Check its damage
★
★
Steering knuckle/front wheel bearing: Check the looseness of connection, abnormal sound
★
Engine oil pan bolt: Check its looseness, and tighten it if necessary
★
143
Maintenance and Care
Mileage (Km)
Maintenance Item
15000
30000
Control arm rubber sleeve: Check its damage
★
★
Brake hose: Check its ageing, damage
★
★
Brake pipe: Check its damage, corrosion and the leakage at any joint
★
★
★
★
Suspension components: Check its abnormal looseness or friction, damage, and normal working
5000
★
★
All joints of fuel system: Check its ageing, damange, abnormal looseness or friction
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
Exhaust system: Check its leakage and damage, adjust or replace it, if necessary
Steering system: Check the power steering fluid level, whether the clearance between the racks of
steering wheel’s gear is proper, the connection condition of all linkages, whether the system works
normally, and repair or replace it, if necessary
Cooling system: Check the antifreeze fluid level, the status of all connecting pipes, leakage, and replace
it, if necessary
Brake system: Check the brake fluid level, the status of all connecting pipes, damage and leakage, the
working condition of the system, and repair or replace it, if necessary
A/C system: Check whether its pressure is normal, damaged, has abnormal sound, odor, and works
normally
Tire (including spare tire): Check the depth of tire pattern, regulate the air pressure of tire, and check the
144
Maintenance and Care
Mileage (Km)
Maintenance Item
5000
15000
30000
tightening torque of wheel bolt.
★
Tire position change
Chassis and body connecting bolt: Check its looseness, and tighten it, if necessary
★
★
★
Wheel: Check its looseness
★
★
★
★
★
★
★
★
★
Engine idling check: Check whether the engine working condition of the engine, parameters of
electronic fuel injector, and its exhaust are normal when the engine operates at the idle speed, adjust it, if
necessary
Trail driving: Check whether the functions of all mechanisms are normal or not, adjust it, if necessary
Note: For the manual transmission, the transmission gear oil shall be replaced every one-year of traveling or the mileage of 30,000 KM,
and the brake fluid must be replaced every two-year of travelling or the mileage of 50,000 KM.
145
Maintenance and Care
___________________
First 5000km Maintenance Card (within
from purchase
date)
CHERY 6 months asOwner:
First 2500km
Company (Name):_________________
Maintenance Card
Address:________________________
Check itmes:
11. Check the tension
of generator and Yes
No
Telephone:________________________
Date:_______________
air conditioner belts, adjust the
E-Mail:_____________________
tension, if necessary.
Mileage: _____________
Purchase
□ Service
□ Station
12. Check the engine
hood Date::____________________
hinge and □
□
Purpose:____________________ Purpose: ___________
(Seal) lock tongue.
□ Vehicle
□ data13. Check the leakage
of A/C
system.
□
□
License
Plate
Number:__________________
First 5,000 KM
Date: ________________ Mileage: _______________
Maintenance
Check
items:
1. Check Card
the leakage of lubrication, Yes
No
cooling and fuel systems.
(Within 6 months as
from
puchase
2.
Replace
the date)
engine oil and oil
cleaner.
Date:_______________
3. Check the transmission oil level,
quality and color, and refill the oil if
Mileage:_______________
necessary.
4.
Check the coolant level, and
Purpose:___________
refillthe coolant or adjust the coolant
concentration
if necessary.
License
Plate Number
:_______
5. Check the leakage of transmission.
6. Check the damage of dust cap of
Service Station (seal)
steering tie rod.
7. Check the damage of dust cap of
transmission’s
constant
velocity
universal joint.
8. Check the leakage of brake fluid,
the damage of brake hose/pipe.
□
□
License plate number : __
□
□
Service Station (seal)
□
□
17. Check the looseness of chassis and
body connecting bolts.
□
□
18. Check the working condition of
seat belt.
□
□
14. Check the leakage of power
steering pipeline, and refill the power
steering oil.
Chassis No
15. Check the installation and damage
Model
of dust cap of steering universal joint.
□ Vehicle
□ Description
16. Check the smooth gear shifting of
□ Engine
□ No
manual transmission.
□
□
□
Transmission No
□
Paint Grade/Interior Deviices
Optional Parts
□
□
Signature of Owner: ____
Signature of owner :_________
146
Maintenance and Care
9. Check the effective work of brake
wheel cylinder.
10. Check whether the tire inflation
pressure conforms to the specification.
□□
□□
19. Check the working condition,
eletronic fuel injector parameters and
exhaust of the engine while idling.
20. Trial driving to check the functions
of all mechanisms.
□
□
□
□
Maintenance Record
Regular Maintenance
Regular Maintenance
Up to 10,000 KM mileage or
Up to 25,000
KM mileage
or
within
six months
after last
within six months implement
after last
maintenance,
maintenance,
implement
5,000KM
maintenance
items
5,000KM maintenance items
Date: ________________
Date: ________________
Mileage:
_______________
Mileage: _______________
Seal of service station
Seal of service
station
Signature
of owner
Signature
owner for next
Time
or ofmileage
Time or mileage for next
service:
service:
Regular Maintenance
Regular Maintenance
Up to 15,000 KM mileage or
within six months after last
maintenance,
implement
15,000KM maintenance items
Up to 20,000 KM mileage or
within six months after last
maintenance,
implement
5,000KM maintenance items
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Seal of service station
Signature of owner
Time or mileage for next
service:
Seal of service station
Signature of owner
Time or mileage 147
for next
service:
Maintenance and Care
Regular Maintenance
Regular Maintenance
Up to 30,000 KM mileage or
within six months after last
maintenance,
implement
30,000KM maintenance items
Up to 35,000 KM mileage or
within six months after last
maintenance,
implement
5,000KM maintenance items
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Seal of service station
Signature of owner
Time or mileage for next
service:
Seal of service station
Signature of owner
Time or mileage for next
service:
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Implement the regular maintenance in accordance with the Regular Maintenance Specifications for QQ6 (for the
mileage and date requirements within the maintenance period above, whichever occurs first)
148
Maintenance and Care
Regular Maintenance
Regular Maintenance
Regular Maintenance
Up to 40,000 KM mileage or
within six months after last
maintenance,
implement
5,000KM maintenance items
Up to 45,000 KM mileage or
within six months after last
maintenance,
implement
15,000KM maintenance items
Up to 50,000 KM mileage or
within six months after last
maintenance,
implement
5,000KM maintenance items
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Seal of service station
Signature of owner
Time or mileage for next
service:
Seal of service station
Signature of owner
Time or mileage for next
service:
Seal of service station
Signature of owner
Time or mileage for next
service:
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Implement the regular maintenance in accordance with the Regular Maintenance Specifications for QQ6 (for the
mileage and date requirements within the maintenance period above, whichever occurs first)
149
Maintenance and Care
Regular Maintenance
Regular Maintenance
Regular Maintenance
Up to 55,000 KM mileage or
within six months after last
maintenance,
implement
5,000KM maintenance items
Up to 60,000 KM mileage or
within six months after last
maintenance,
implement
30,000KM maintenance items
Up to 65,000 KM mileage or
within six months after last
maintenance,
implement
5,000KM maintenance items
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Seal of service station
Signature of owner
Time or mileage for next
service:
Seal of service station
Signature of owner
Time or mileage for next
service:
Seal of service station
Signature of owner
Time or mileage for next
service:
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Implement the regular maintenance in accordance with the Regular Maintenance Specifications for QQ6 (for the
mileage and date requirements within the maintenance period above, whichever occurs first)
150
Maintenance and Care
Regular Maintenance
Regular Maintenance
Regular Maintenance
Up to 70,000 KM mileage or
within six months after last
maintenance,
implement
5,000KM maintenance items
Up to 75,000 KM mileage or
within six months after last
maintenance,
implement
15,000KM maintenance items
Up to 80,000 KM mileage or
within six months after last
maintenance,
implement
5,000KM maintenance items
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Seal of service station
Signature of owner
Time or mileage for next
service:
Seal of service station
Signature of owner
Time or mileage for next
service:
Seal of service station
Signature of owner
Time or mileage for next
service:
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Implement the regular maintenance in accordance with the Regular Maintenance Specifications for QQ6 (for the
mileage and date requirements within the maintenance period above, whichever occurs first)
Regular Maintenance
Up to 90,000 KM mileage or
within six months after last
151
Maintenance and Care
Regular Maintenance
Regular Maintenance
Up to 85,000 KM mileage or
within six months after last
maintenance,
implement
5,000KM maintenance items
Up to 95,000 KM mileage or
within six months after last
maintenance,
implement
5,000KM maintenance items
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Seal of service station
Signature of owner
Time or mileage for next
service:
Seal of service station
Signature of owner
Time or mileage for next
service:
Date: ________________
Mileage: _______________
Date: ________________
Mileage: _______________
Implement the regular maintenance in accordance with the Regular Maintenance Specifications for QQ6 (for the
mileage and date requirements within the maintenance period above, whichever occurs first)
152
Warranty Serivce
Safety
System
Protection
Your vehicle equipps with the airbag
system. The complete set of airbag
system must be replaced once every 10
years as from the purchase date. And
the airbag system must be replaced by
the
CHERY
Authorized
Service
Station.
To ensure the normal operation of the
airbag system, you shall get to the
CHERY Authorized Service Station
according to the specified time and
have the airbag system replaced.
If the airbag system is replaced before
the specified time (e.g., after the
occurrence of an accident), please
carefully complete the replacement
record for future reference.
Safety System Replacement
Record








Driver’s Airbag
Front Passenger’s Airbag
Left Side Airbag
Right Side Airbag
Airbag Control Module
Airbag Cable
Pretensioner Seat Belt
Other Parts
1.---------------------------2.---------------------------3.---------------------------4.---------------------------5.---------------------------6.---------------------------Date: -----------------------Seal of CHERY Authorized
Service Station:
Safety System Replacement
Record








Driver’s Airbag
Front Passenger’s Airbag
Left Side Airbag
Right Side Airbag
Airbag Control Module
Airbag Cable
Pretensioner Seat Belt
Other Parts
1.---------------------------2.---------------------------3.---------------------------4.---------------------------5.---------------------------6.---------------------------Date: -----------------------Seal of CHERY Authorized
Service Station:
153
Warranty Serivce
Safety System Replacement
Record
Safety System Replacement
Record
Safety System Replacement
Record
























Driver’s Airbag
Front Passenger’s Airbag
Left Side Airbag
Right Side Airbag
Airbag Control Module
Airbag Cable
Pretensioner Seat Belt
Other Parts
Driver’s Airbag
Front Passenger’s Airbag
Left Side Airbag
Right Side Airbag
Airbag Control Module
Airbag Cable
Pretensioner Seat Belt
Other Parts
Driver’s Airbag
Front Passenger’s Airbag
Left Side Airbag
Right Side Airbag
Airbag Control Module
Airbag Cable
Pretensioner Seat Belt
Other Parts
1.---------------------------2.---------------------------3.---------------------------4.---------------------------5.---------------------------6.----------------------------
1.---------------------------2.---------------------------3.---------------------------4.---------------------------5.---------------------------6.----------------------------
1.---------------------------2.---------------------------3.---------------------------4.---------------------------5.---------------------------6.----------------------------
Date: -----------------------Seal of CHERY Authorized
Service Station:
Date: -----------------------Seal of CHERY Authorized
Service Station:
Date: -----------------------Seal of CHERY Authorized
Service Station:
154
Capacity and Specification Parameters
Chapter 12
Capacity And Specification Parameters
155
Capacity and Specification Parameters
Vehicle Identification
Direction
VIN
Vehicle Data Plate
156
Capacity and Specification Parameters
VIN
The CHERY
Vehicle Data Plate
Engine No
QQ6’s VIN code is
engraved on the lower of gutter channel
at front side of the vehicle (as shown in
the figure below).
Engine No.
Number of SQR472F series engine is
printed on the boss of cylinder body
over the engine exhaust side oil cleaner
(as shown in the figure below).
The vehicle data plate is secured on the
crossbeam of radiator.
Number of SQR473F series engine is
printed on the boss of cylinder body
near the engine exhaust side oil cleaner
Fuel
(as shown in the figure below).
Fuel Tank Capacity:
Gasoline Engine: 45 L
Use the following fuel level only, and
use the high quality fuel containing the
cleaning agents and other additive
Engine No
agents. Using the lower level fuel can
damage the engine.
If you can’t buy the high quality
157
Capacity and Specification Parameters
gasoline
containing
additives
temporarily, or when the engine has
such defaults as poor start, inconsistent
93# Above Unleaded Gasoline
(Its Octane Number is Above
93)
idle or poor power and etc, a proper
The usage of gasoline with the grade
amount of additives shall be added
lower than No. 93 is not permitted;
when refueling. The fuel additives play
otherwise it may damage the engine,
a role in preventing the engine from
which is excluded from the warranty
corroding and scaling, and cleaning the
scope.
fuel system.
The vehicles equipped with catalytic
The CHERY
Authorized Service
converter must use unleaded gasoline
If you fill the leaded gasoline
into the fuel tank by
accident, please don’t start
up the engine (even if filling a little
of leaded gasoline only). The lead
contained in the fuel may make the
oxygen
sensor
and
catalytic
converter damaged permanently. It is
recommended to contact the nearest
CHERY Authorized Service Station
immediately.
Engine Oil
Station has the fuel additives in stock
only.
Replace engine oil
certified by this company. The staff of
To avoid the occurrence of filling
The
the service station is accomplished in
improper fuel, the necked refiller
CHERY Company is:
its application method and the method
opening design is applied for the fuel
to process the scale of engine, and
tank to enable the compressor gun for
provide you with warm service.
unleaded gasoline only to stretch into
You may hear the fizz sound when you
the opening to fill fuel.
open the fuel filler cap. And this is
normal.
engine
oil
recommended
by
API SJ SAE 10W-40 for the SQR473F
series engines, with the refilling of
3.5-4.0L; API SF SAE 10W-30 for the
SQR472F series engines, with the
refilling of 3.5L. The engine of your
vehicle is designed to apply this kind of
158
Capacity and Specification Parameters
engine oil. Please strictly abide by this
pleasantly help you.
provision so as to get best performance.
Please
don’t
use
the
additional
additives
or
engine treatment agents
approved by CHERY
Company
because these additives aren’t only
unnecessary to use, but also may
damage the engine under some
conditions. This kind of damage is
NOT covered in this warranty.
Automobile oil/fluid
Refill engine oil
M/T (Manual Transmission)
Please replace the oil/fluid according
to the time interval listed in the
Maintenance and Care.
the CHERY Company’s specification.
Please don’t use the engine
oil that doesn’t conform to
the
specification
and
requirement above because these
improper engine oils may damage
the engine, which this kind of
damage is NOT covered in this
warranty.
The
Transmission oil
CHERY
Authorized
Service
Station has the CHERY OEM oil/fluid
stocked.
Service
QR513MHA transmission oil employs
Brake fluid and clutch oil
Station will keep the related records on
the 75W-90 synthetic gear oil, with the
The Dot 4 brake fluid is available, and
date to renew the oil, and will also use
refilling of 1.8±0.1L;
refilled to the MAX mark as required.
QR512 transmission oil employs the
The brake fluid without paraffin wax is
75W-90 synthetic gear oil, with the
available only.
Any
CHERY
Authorized
the recommended engine oil. The
engine oil refilled shall not exceed the
MAX mark on the dip stick.
refilling of 2.1L.
If you require the detailed comments or
information,
Authorized
each
Service
CHERY
Station
will
Power assisted steering oil
Use the hydraulic oil conforming to
159
Capacity and Specification Parameters
designated windscreen washer fluid
The curb weight means the weight that
concentrated solution and water (1:20).
the vehicle can drive under this weight,
If the exterior temperature is low, the
including coolant, lubricating oil, fuel
winter windscreen washer fluid is
tank filling to 90%, tools, spare tire and
In the case of heavy load (with
trailer, a long time driving in
the mountain area, for
example), it shall be performed to
simultaneously replace the brake
gasket and the brake fluid. It must be
ensured that the brake system is
absolutely clean during adding the
brake fluid, and it may make the
braking performance if any foreign
follow the
pollutedPlease
substances
entervehicle
into load
the
braking capacity
system. prescribed in the
Manual (if applicable), and it
is not permitted to exceed the
allowable gross weight, otherwise, it
may cause the vehicle braking and
operation control performance change
and may result in traffic accident.
applied.
drive weight (75 kg).
gross weight minus the curb weight.
Please refer to the instruction on the
Effective load means the allowable
The optional and subsequent additional
Coolant
container for correct concentration.
Use the coolant that meets the CHERY
The empty/scrap engine oil containers
specification. The CHERY Authorized
and strainers shall not be disposed as
Service Station has the CHERY EM oil
household waste. Please use local
stocked.
authorized waste disposal facilities.
Windscreen Washer Fluid
WOC (Weight of Car)
Fill the reservoir with the CHERY
devices will reduce the effective load.
160
Capacity and Specification Parameters
CAPACITY (L)
Engine Oil
SQR473F series: 3.5—4.0 L
(Including strainer)
SQR472F series: 3.5 L
QR513MHA: 1.8±0.1L
M/T (Manual Transmission)
QR512: 2.1L
Power Assisted Steering
MAX mark
1.3L displacement: 6.5 L
Cooling System
1.1L displacement: 6.0 L
Windscreen
Cleaning
System
Fuel Tank
Brake Fluid /Clutch Oil
Reservoir
MAX mark
45L
MAX mark
161
Capacity and Specification Parameters
Capacity
Complete Vehicle Curb Mass
Model
SQR7130QQ6
SQR7110QQ6
kg
1050
990
Front Axle kg
650
586
Rear Axle kg
400
404
375
375
1425
1365
730
705
695
660
5
5
Complete Vehicle Kerb Mass
Complete Vehicle
Kerb
Axle-Load
Mass
Maximum Manufacturer’s Load
Maximum Manufacturer's Total Mass
kg
Axle-load Mss at Front Axle kg
Maximum
Manufacturer's
Rear Axle kg
Total Mass
Occupants (including driver) person
162
Capacity and Specification Parameters
month, especially for the tire pressure during driving at
high speed.
Wheel and Tire

The pressure values listed in this table are applicable to
the cold tire, and it is unnecessary to decrease the air
pressure if it increases slightly after the tire is heated.

If the winter tire is applied, the pressure values listed in
the table above shall increase by 20kPa.

To make you convenient to search the specific value of
inflation pressure, the sticky label is attached on the
inside of cover board of fuel filler cap on where the
specific inflation pressure value of tire is marked.
Tire pressure
The pressure of cold tire shall be inspected before you begin
to take your journey (Don’t forget to check the air pressure of
spare tire).
Tire pressure (Cold tire) (KPA)
Item
Front
Wheel
Rear
Wheel
Unloaded/S
emi-loaded
Laden
Unloaded/S
emi-loaded
Laden
Tire
Pressure
(kPa)
Spare
Tire
230
230
Tightening torque of wheel bolts
The tigntening torque of wheel bolts shall be 110±10N•m.
Wheel
230
210
Tire
210
175/60R14×79H
Wheel Rim
5J
Precautions on tire pressure

The tire pressure shall be checked at least once every
163
Capacity and Specification Parameters
164
Capacity and Specification Parameters
Engine Information
Model
SQR473F
SQR472F
Vertical, water-cooled, four-strokes,
in-line, double overhead camshaft,
multipoint
electronic
gasoline
injection
Cylinder Diameter (mm)
Vertical, water-cooled, four-strokes,
in-line, double overhead camshaft, 4
valves, multipoint electronic gasoline
injection
73
Piston Stroke (mm)
77.5
66.5
Displacement ml
1297
1083
Compression Ratio
10
9.5:1
Rated Power (Net Power) kW
61
50
Speed at rated power (r/min)
6000
6000
Max Torque N.m
114
90
Speed at max. torque (r/min)
3800~4500
3500~4000
Min Fuel Consumption g/kw.h
280
275
Type
72
165
Capacity and Specification Parameters
The adjustment or inspection shall be conducted at least 5 minutes later after the engine stops operating.
Vehicle Dimension
166
Capacity and Specification Parameters
Item
Dimension (mm)
A=Max Length
3998
B=Full Width
1640
C=Full Height (Kerb Weight)
1535
D=Wheelbase
2340
Front
1420
Rear
1420
Ground Clearance
≥130
E=Wheel
Track
167
169