MPS 602 - Extron Electronics

SWITCHERS
MPS 602
MEDIA PRESENTATION SWITCHER
WITH TWISTED PAIR INPUT
AND OUTPUT
Simplified AV Switching with Powerful
Integration Capabilities
AA Integrates HDMI, RGB, and audio
sources into presentation systems
AA Selectable HDMI or DTP 230 twisted
pair output
AA DTP 230 input and output extend
HDMI or DVI, audio, control, and
analog audio over one CATx cable
AA Mic/line input with 48 volt phantom
power and ducking
AA HDMI audio embedding and deembedding
AA Optional integrated stereo or mono
Class D power amplifiers
Introduction
The Extron MPS 602 is a simple-to-use, six input media
Reliable Switching for Digital and Analog Formats
presentation switcher for digital and analog sources. It offers digital
The MPS 602 features a unique independent switching capability
video switching with three HDCP-compliant HDMI inputs and one
for digital and analog RGB video sources. The MPS 602 digitizes
DTP 230 twisted pair input, and analog video switching with two
analog RGB input signals to ensure that a reliable, high quality digital
RGB inputs that are digitized for distribution to the digital outputs.
video signal is sent to the HDMI and DTP 230 outputs. The RGB
For increased flexibility, the MPS 602 includes a DTP 230 twisted
inputs can be switched independently to the local RGB output.
pair output and an HDMI output that are switch-selectable. The
DTP 230 input and output extend video, audio, and bidirectional
control signals to DTP 230 transmitters and receivers, each over a
single CATx cable up to 230 feet (70 meters). The MPS 602 also
includes several audio switching and processing features, available
power amplification, plus flexible control options for complete
switching and distribution with local and remote display support.
To enhance and simplify integration of sources and displays, and
to help ensure optimal system performance and dependability, the
MPS 602 features two Extron-exclusive technologies: EDID Minder®
and Key Minder®. EDID Minder manages EDID communication
between the display device and input sources to ensure that the
correct video formats are displayed reliably. For HDMI signals
with protected content, Key Minder authenticates and maintains
Integrated Digital Twisted Pair Extension
continuous HDCP encryption between input and output devices to
The DTP 230 twisted pair input on the MPS 602 can receive
ensure quick and reliable switching.
signals from a remote DTP 230 transmitter in areas such as a
conference table, lectern, or wall for connecting a guest laptop. The
DTP 230 twisted pair output can be used to transmit signals from
an MPS 602 in a rack to a DTP 230 receiver behind a flat-panel
display on a wall, above a ceiling-mounted projector, or any other
remote location. DTP 230 transmitters and receivers are available in
compact, low-profile enclosures or Decora wallplate versions.
®
Audio Integration Capabilities with Available Power
Amplification
The MPS 602 includes six-input analog audio switching, a mic/line
input with 48 volt phantom power, HDMI audio embedding and
de-embedding, and several audio processing features for mixing and
ducking. The mic ducking feature automatically reduces program
audio when it detects a microphone signal, replacing the need for
The DTP 230 twisted pair input and output include additional,
a separate audio ducking processor. To streamline audio setup, the
convenient, integrator-friendly features designed to help simplify
MPS 602 features front panel mic and program audio output volume
installation. Bidirectional RS-232 and IR signals can be inserted
controls which allow for independent adjustment of mic volume,
from a control system and transmitted over the single CATx cable
program audio volume, and muting.
together with the video and audio, enabling control of a source or
display. Additionally, the MPS 602 can send power to the DTP 230
transmitter and receiver over the same CATx cable, streamlining
system design and installation.
The MPS 602 is available in three models, two of which feature
integrated power amplifiers. The MPS 602 is a non-amplified
model with a variable preamp output. The MPS 602 SA delivers
stereo power amplification with 50 watts rms per channel into
4 ohms and 25 watts rms per channel into 8 ohms, while the
MPS 602 MA provides mono 70 volt amplification with 100 watts
rms output. Both of the amplified models feature an Extron
exclusive Class D amplifier design with patented CDRS™ - Class
D Ripple Suppression technology that provides a smooth, clean
audio waveform as well as an improvement in signal fidelity over
conventional Class D amplifier designs.
Features
Three HDMI inputs and two
RGB inputs
Digital conversion of analog
input signals
The MPS 602 allows for switching between
HDMI and analog video sources.
The MPS 602 digitizes analog input signals,
ensuring that a reliable, high quality digital
video signal is sent to the output.
Automatically reduces program audio when
a microphone signal is detected, eliminating
the need for a separate audio ducking
processor.
HDCP compliant
Audio breakaway
Selectable HDMI or DTP 230
output
The input signal can be routed to either the
HDMI output or the DTP 230 output.
The MPS 602 fully supports HDCPencrypted sources, with selectable
authorization for unencrypted content.
Independent RGB input
switching
Compatible with all DTP 230
Series models
The MPS 602 supports DTP 230 twisted
pair signal transmission of HDMI or DVI,
analog audio, control, and remote power up
to 230 feet (70 meters) over a single CATx
cable.
Auto-switching between inputs
Authenticates and maintains continuous
HDCP encryption between input and
output devices to ensure quick and reliable
switching in professional AV environments.
The MPS 602 SA includes a stereo power
amplifier with 50 watts per channel into
4 ohms and 25 watts per channel into
8 ohms. The MPS 602 MA offers a mono
70 volt amplifier with 100 watts rms output.
HDMI audio de-embedding
Embedded HDMI two-channel PCM audio
can be extracted to the analog outputs.
SIG
LINK
AUDIO
IR
Tx Rx G Tx Rx
Extron
DTP HDMI 230 Tx
Extron
TLP 1000TV
Wireless
Microphone
System
Transmitter
CATx Cable
up to 230' (70 m)
Rack-mountable 1U, full rack
width metal enclosure
sync
select
ready
power
Extron
MPS 602 SA
WiFi
1 2 3 4
FL OFF
LINK
OVER DTP
OVER DTP
RS-232
5
DTP IN
SIG
HDMI
LINK
1
R
L
2
R
L
3
R
IR
Tx Rx G Tx Rx
L
4
R
L
5
R
AUDIO OUT
3
SELECT
Tx Rx G Tx Rx
6
SIG
50/60 Hz
OPEN/CLOSE
L
MUTE HDMI AUDIO
INPUTS
2
IR
OUTPUTS
4
RGB OUT
PHANTOM POWER
RS-232
1
AUDIO IN
X.XA MAX
MIC LINE
L
PROGRAM
L
FIXED
R
R
CLASS 2 WIRING
RS-232
POWER
12V
500mA
MAX
R
COM1
RTS CTS
Tx Rx
COM 2
Tx Rx
INPUT
2 3 4
COM 3
Tx Rx
1
Switcher
Control RS-232
Audio
Receiver
OVER DTP
RS-232
IR
Tx Rx G Tx Rx
POWER
12V
0.7A MAX
RS-232
HDMI
SIG
LINK
DTP HDMI 230 Rx
OUTPUTS
L
DTP IN
AUDIO
R
3
IR
IR
2
4
S G S G
RS-232
Extron
DTP HDMI 230 Rx
1
AV Device
Control
Extron
SI 28
Surface Mount
Speakers
RELAY
2
1
S G S G
LAN
Tx Rx G
Flat Panel Display
ETV
Control Processor
REMOTE
8Ω / 4Ω
CATx Cable
up to 230' (70 m)
HDMI
USB
Extron
IPL 250
MPS 602 SA
R
AMP OUT
L
MIC
MIX
DTP OUT
Ethernet
Media Presentation
Switcher
Audio
100-240V
TCP/IP
Network
menu
audio
VGA
HDMI
Ethernet
10" Tabletop
TouchLink
Touchpanel
Audio
PQLS
The MPS 602 provides multiple control and
monitoring options in addition to the front
panel.
A mic or line level audio source can be
mixed with program audio. Selectable
48 volt phantom power allows the use of
condenser microphones.
OVER DTP
RS-232
DTP OUT
USB and RS-232 control
Mic/line input with 48 volt
phantom power
HDMI
STANDBY/ON
Available power amplification
Analog input audio signals can be
embedded onto the HDMI output signal.
Bidirectional RS-232 control and IR signals
can be transmitted alongside video and
audio over the DTP 230 twisted pair cable,
simplifying integration with a control system
for managing AV devices.
Blu-ray Player
Front panel security lockout
HDMI audio embedding
Bidirectional RS-232 and IR
insertion
Rack PC
Auto-switching allows for simple,
unmanaged installation in locations such
as in a lectern or under a conference
table. When multiple inputs are active, the
switching priority is configurable.
Key Minder
XTP DTP 24 cable is highly recommended
for optimum signal transmission between
the MPS 602 and DTP 230 transmitters and
receivers.
Laptop
The MPS 602 provides volume control and
muting for the program and amplified audio
outputs, as well as a separate control for
mic volume and muting.
Automatically manages EDID
communication between connected
devices. EDID Minder ensures that all
sources power up properly and reliably
output content for display.
Extron XTP DTP 24
Shielded Twisted Pair cable
recommended
Audio
Output volume control
EDID Minder
Compatible with CAT 5e, CAT6,
and CAT 7 twisted pair cable
INPUTS
Provides the capability to break an analog
audio signal away from its corresponding
video signal and route to the audio outputs,
allowing the analog audio channels to be
operated as a separate switcher.
Supported HDMI specification
features include data rates up
to 6.75 Gbps, Deep Color up
to 12-bit, 3D, and HD lossless
audio formats
An RGB input can be independently
switched to the local RGB output.
POWER
12V
0.7A MAX
Mic ducking
RELAY
3
4
Features
COMPATIBLE WITH ALL EXTRON DTP 230 TRANSMITTERS AND RECEIVERS
The MPS 602 includes one DTP 230 twisted pair input and one DTP 230 output that support transmission of HDMI, analog stereo
audio, and bidirectional RS-232 and IR signals over a single CATx cable up to 230 feet (70 meters). They can be mixed and matched
with DTP 230 transmitters and receivers, available in low-profile enclosures and Decora wallplate models for HDMI or DVI. The
MPS 602 can conveniently power these devices over the same CATx cable, and directly interface with control systems for sending
RS‑232 and IR control to remote devices. These capabilities allow system integrators to create flexible yet efficient system designs
serving local and remote source and display locations in a variety of presentation environments.
INTUITIVE SETUP AND OPERATION
The MPS 602 can be easily configured by using the Product Configuration Software via the front panel USB port. The user-friendly
GUI of the configuration software allows for expedited setup. The intuitive user-interface makes it easy to independently apply EDID
settings to each input, allowing the user to select from EDID captured from connected output devices, factory default EDID, or custom
EDID uploaded to the unit. Users can also view details about the current input and output, such as signal format, resolution, and
HDCP status, and conveniently switch between the inputs. In addition, audio settings are available for input gain, volume, mic talk
over, and more.
Overview
HDCP compliant
Worry-free display of protected
content from digital video sources.
Independent RGB analog
input switching
An RGB input can be independently
switched to the local RGB output.
Analog and digital input
switching
Volume and muting controls
HDMI, DTP 230, or RGB analog inputs
can be selected for independent
switching to the HDMI or DTP 230 output.
Allow for adjustment of the
microphone level, as well as the
program and amplified audio level.
MPS 602
HDMI and RGB inputs
Ensure compatibility with
digital and analog sources.
Input and output for
DTP 230 twisted pair
extension
Support digital signal
transmission up to 230 feet
(70 meters) over a single
twisted pair cable.
Selectable HDMI or
DTP 230 output
Mic/line input with
48 V phantom power
The input signal can be
routed to either the HDMI
output or the DTP 230 output.
One mic/line input is available
for mixing microphones or
line level sources into the
audio output.
RS-232 control
The MPS 602 can be controlled and
monitored using serial commands.
MPS 602 SA
Optional integrated power amplifier
Two models are available with efficient Class D amplifiers:
a stereo power amplifier with 50 watts rms output per
channel into 4 ohms, and a mono 70 volt power amplifier
with 100 watts rms output.
Specifications
VIDEO — VGA
AUDIO OUTPUT — POWER AMPLIFIER
Bandwidth350 MHz (-3 dB)
Switching speed<5 ms (max.)
Number/signal type
MPS 602 SA1 stereo (default) or 2 mono, 2 channels total
MPS 602 MA1 mono, 70V line
Output power
MPS 602 SA25 watts per channel, 8 ohms, 1 kHz, 0.1% THD
50 watts per channel, 4 ohms, 1 kHz, 0.1% THD
MPS 602 MA100 watts per channel, 4 ohms, 1 kHz, 0.1% THD
Amplifier typeClass D
VIDEO — HDMI AND DTP
Maximum data rate6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock165 MHz
Resolution1920x1200 @ 60 Hz or 1080p @ 60 Hz, 12 bit color, and
2K
FormatsRGB and YCbCr digital video
VIDEO INPUT
Number/signal type
VGA inputs2 VGA-QXGA, RGBHV, RGBS
HDMI inputs3 HDMI (or single link DVI-D, with appropriate DVI-HDMI
adapters)
DTP input1 DTP 230 input
Connectors
VGA inputs2 female 15 pin HD
HDMI inputs3 female HDMI, type A
DTP input1 RJ-45 female
VIDEO OUTPUT
Number/signal type
Local VGA output1 VGA-QXGA RGBHV, RGBS
HDMI outputs1 HDMI (or single link DVI-D)
DTP output1 DTP 230 output
DTP signal
Transmission distanceup to 230' (70 m) using CAT 5e/6/6a/7 cable or XTP DTP
24 TP cable
Cable requirementsSolid conductor, 24 AWG or better
Cable recommendations400 MHz bandwidth, STP (shielded twisted pair)
NOTE: Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
AUDIO — INDIVIDUAL AUDIO GROUPS (VGA, HDMI)
GainUnbalanced output: 0 dB; balanced output: +6 dB
Frequency response20 Hz to 20 kHz, ±0.5 dB
AUDIO INPUT — (VGA, AND HDMI VIDEO)
Number/signal type
VGA inputs2 stereo, unbalanced/balanced
HDMI inputs3 stereo, unbalanced
DTP input1 stereo, unbalanced/balanced analog,
1 embedded digital audio from DTP
Embedded digital audio source formats2-ch PCM
AUDIO OUTPUT
Number/signal type(2) stereo, balanced/unbalanced (fixed and variable
outputs)
(1) DTP 230 analog audio and 1 embedded digitl audio
on DTP signal
(1) embedded digital audio on HDMI
Connector(2) 3.5 mm captive screw connector, 5-pole
(1) RJ-45
(1) female HDMI type A
MIC/LINE INPUT
Number/signal type1 mono balanced/unbalanced
Connector(1) 3.5 mm captive screw connector
Input gain adjustment-18 dB to +60 dB, 1 dB steps, adjustable per input
Microphone volume range-66 dB to +12 dB
Microphone DC power+48 VDC phantom power, can be turned on or off
NOTE: Mic/Line audio is not embedded on DTP analog audio output or digital embedded audio.
CONTROL/REMOTE — SWITCHER
Serial control port1 RS-232, 3.5 mm captive screw connector, 3-pole, rear
panel
USB control ports1 front panel female mini USB B
CONTROL/REMOTE
External device (pass-through, unidirectional or bidirectional)
Quantity/type(2) RS-232 and IR via (2) 3.5 mm 5-pole captive screw
connectors
Serial control pass-through portsRS-232 and IR via (2) 3.5mm 5-pole captive screw
connectors
IR pass-through control ports(2) bidirectional TTL level (0 to 5 V) modulated infrared
control from 30 kHz up to 60 kHz
IR control pin configuration3 = GND, 4 = IR Tx, 5 = IR Rx
GENERAL
Power supplyInternal
Input: 100-240 VAC, 50-60 Hz
Remote power capabilitySupports up to two endpoints (one DTP Tx, one DTP Rx)
Mounting
Rack mountYes, with included brackets
Enclosure typeMetal
Enclosure dimensions1.75" H x 17.4" W x 8.5" D (1U high, full rack wide)
4.4 cm H x 43.2 cm W x 21.6 cm D
(Depth excludes connectors and knobs. Width excludes
rack ears.)
Regulatory compliance
SafetyCE, c-UL, UL
EMI/EMCCE, C-tick, ICES, FCC Class A, VCCI, ICES
EnvironmentalComplies with the appropriate requirements of RoHS,
WEEE
Model
MPS 602
MPS 602 SA
MPS 602 MA
Version Description
Variable Preamp Output - No Amplifier
2x50 Watt Stereo Power Amplifier
100 Watt 70 Volt Mono Power Amplifier
Part number
60-1313-01
60-1314-01
60-1315-01
For complete specifications, please go to www.extron.com
Specifications are subject to change without notice.
Worldwide Sales Offices
A n a h e i m • R a l e i g h • S i l i c o n Va l l ey • Da l l a s • N ew Yo r k • Wa s h i n g to n, DC • To ro nto • M ex i c o C i t y • Pa r i s • Lo n d o n • F r a n k f u r t
A m e r s foo r t • M o s c ow • D u b a i • J o h a n n e s b u r g • N e w D e l h i • B a n g a l o r e • S i n g a p o r e • S e o u l • S h a n g h a i • B e i j i n g • To k yo
UNITED STATES
EUROPE
ASIA
MIDDLE EAST
+800.633.9876
+800.3987.6673
+800.7339.8766
+971.4.299.1800
Inside USA/Canada
Inside Europe
Inside Asia
+1.714.491.1500
+31.33.453.4040
+65.6383.4400
© 2013 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.
06-2013
68-2467-01
REV. A1
Letter - English - NP