Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
S E C T I O N 10
Hoists
AIR CHAIN HOISTS ..........................10-22–23
CHAIN CONTAINER, HOIST.............10-20–21
CHAIN HOISTS
Air ....................................................10-22–23
Chain Container ..............................10-20–21
Cord Reels ............................................10-21
Electric ............................................10-12–19
Festooning Packages ...........................10-21
Hand....................................................10-7–9
Trolley Hoist ........................................10-7–8
Weather Resistant Covers ...................10-20
CORD REELS, HOIST.............................10-21
FALL ARREST DEVICES........................10-26
FESTOONING PACKAGES ...................10-21
GRIPHOIST WINCH HOIST ....................10-26
HAND
Chain Hoists ........................................10-7–9
Chain Pullers .......................................10-3–6
HOIST
Air, Chain .........................................10-22-23
Chain Container ..............................10-20–21
Chain Electric ..................................10-12–19
Cord Reels ............................................10-21
Festooning Packages ...........................10-21
Hand Chain .........................................10-7–9
How to Choose the Right Hoist ...............10-2
I-Beam Specifications .............................10-3
Ordering Hand Hoists..............................10-2
Ordering Lever Operated Hoist ...............10-2
Ordering Powered Hoists ........................10-2
Repairs? Need a Hoist or
Puller Repaired? ....................................10-1
Safety Tips ..........................................10-1–2
Weather Resistant Covers ...................10-20
Wire Rope, Electric .........................10-24–25
I-BEAM SPECIFICATIONS .......................10-3
LOAD
Binder, Ratchet........................................10-6
LUG-ALL WINCH HOIST
Hot Stick Hoist (Livewire Puller) ............10-25
Portable Winch Models .........................10-24
MANUAL TROLLEYS..........................10-9–11
PULLERS
Griphoist Winch Hoist............................10-26
Hand Chain Pullers .............................10-4–6
Hot Stick Hoist (Livewire Puller) ............10-25
Lug-All Winch Hoist ...............................10-24
Maasdam - Pow'R-Pulls ........................10-24
Rope Pullers..........................................10-25
Web Strap Pullers .................................10-25
Wire Rope Winch-Hoists .................10-23–25
Wyeth-Scott Co. - The More
Power Puller®......................................10-25
TROLLEYS
Close Radius .........................................10-10
Economical............................................10-10
Electric ..................................................10-19
Hoists ..................................................10-7–8
Low Headroom .................10-8, 10-10, 10-13
Manual (Push) ...................................10-9–11
Motorized .............................10-13, 10-19–20
Overhead Traveling ...............................10-11
Plain and Gear Models ......................10-8–11
Wide Range...........................................10-11
WEB STRAP PULLERS..........................10-25
WINCH-HOISTS, WIRE ROPE
Fall Protection Devices (Block Stop) .....10-26
Griphoist Winch/Hoist......................10-26–27
Lug-All Winch Hoist ...............................10-24
Maasdam - Pow'R-Pulls ........................10-24
Wyeth-Scott Co. - The More
Power Puller®......................................10-25
WIRE ROPE
Electric Hoist ...................................10-23–24
Pullers .............................................10-24–27
Winch Hoist .....................................10-24–27
10
10- A
Hoists
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Hoist or Puller need a repair?
WE OFFER COMPLETE IN-HOUSE REPAIR OF ELECTRIC AND MANUAL CHAIN HOISTS.
Repairs and testing comply with
ANSI B30.16 specifications.
We repair all types and brands
of manual and electric hoists.
We are a stocking distributor of
Columbus McKinnon, Harrington,
Coffing,Tractel, JD Newhouse, and
Lugall Hoists & Pullers.
We repair, service, and test
hoists in our facilities.
Rentals are also Available.
Hoist Safety
!
WARNING
Consult company for any usage of hoists
that do not involve lifting of the load on the
lower hook, or usage of hoists in the
inverted position. Using hoists, without
special precautions, in such applications
may cause an accident that could result in
injury and/or property damage.
DO’S AND DON’TS
Safe Operation of Hoists
The following are Do's and Don’ts for safe
operation of overhead hoists. Taking precedence
over any specific rule listed here, however, is the
most important rule of all-USE COMMON
SENSE. A few minutes spent reading these rules
can make an operator aware of dangerous
practices to avoid and precautions to take for
his/her own safety and the safety of others.
Frequent examinations and periodic inspections
of the equipment as well as a conscientious
observance of safety rules may save lives as well
as time and money.
!
WARNING
To Avoid Injury
1.
2.
3.
4.
5.
10
6.
Hoists
7.
DO read ANSI B30.16 Safety Standard for
Overhead Hoists and Hoist Manufacturer's
Operating and Maintenance Instructions.
DO be familiar with hoist operating
controls, procedures, and warnings.
DO make sure hook travel is in the same
direction as shown on controls.
DO make sure hoist limit switches
function properly.
DO maintain firm footing when operating
hoist.
DO make sure that load slings or other
approved single attachments are properly
sized and seated in the hook saddle.
DO make sure that the hook latch, if used, is
closed and not supporting any part of the
load.
10-1
8. DO make sure that load is free to move and
will clear all obstructions.
9. DO take up slack carefully, check load
balance, lift a few inches, and check load
holding action before continuing.
10 DO avoid swinging of load or load hook.
11. DO make sure that all persons stay clear of
the suspended load.
12. DO warn personnel of an approaching load.
13. DO protect wire rope and load chain
from weld spatter or other damaging
contaminants.
14. DO promptly report any malfunction,
unusual performance, or damage of the
hoist.
15. DO inspect hoist regularly, replace damaged
or worn parts, and keep appropriate records
of maintenance.
16. DO use the hoist manufacturer's
recommended parts when repairing a hoist.
17. DO use hook latches whenever possible.
18. DO apply lubricant to the wire rope or load
chain as recommended by the hoist manufacturer.
19. DO NOT lift more than rated load.
20. DO NOT use the hoist load limiting device to
measure the load.
21. DO NOT use a damaged hoist or a hoist
that is not working correctly.
22. DO NOT use a hoist with twisted, kinked,
damaged or worn wire rope or chain.
23. DO NOT lift a load unless wire rope is
properly seated in its groove(s) or unless
chain is properly seated in chain wheel(s)
or sprocket(s).
24. DO NOT use wire rope or load chain as a
sling or wrap rope or chain around the load.
25. DO NOT lift a load if any binding
prevents equal loading on all supporting
ropes or chains.
26. DO NOT apply the load to the tip of the hook.
WWW.HANESSUPPLY.COM
27. DO NOT operate unless load is centered
under hoist.
28. DO NOT allow your attention to be
diverted from operating the hoist.
29. DO NOT operate the hoist beyond limits of
wire rope or load chain travel.
30. DO NOT use limit switches as routine
operating stops unless recommended. They
are emergency devices only.
31. DO NOT use hoist to lift, support or
transport people.
32. DO NOT lift loads over people.
33. DO NOT leave a suspended load
unattended unless specific precautions have
been taken.
34. DO NOT allow sharp contact between two
hoists or between hoist and obstructions.
35. DO NOT allow the rope, chain, or hook to be
used as a ground for welding.
36. DO NOT allow the rope, chain, or hook to be
touched by a live welding electrode.
37. DO NOT remove or obscure the warnings on
the hoist.
38. DO NOT adjust or repair a hoist unless
qualified to perform hoist maintenance.
39. DO NOT attempt to lengthen the load rope
or chain or repair damaged load rope or
chain.
The safety laws for elevators, for lifting of people,
and for dumbwaiters specify construction details
that are not incorporated in CM industrial hoists.
For such applications, refer to the requirements
of applicable state and local codes, and the
American National Safety Code for elevators,
dumbwaiters, escalators, and moving walks
(ANSI A17.1-1978). Columbus McKinnon
Corporation cannot be responsible for
applications other than those for which CM
equipment is intended.
*Copies of this Standard can be obtained from American
National Standards Institute, 1430 Broadway, New York,
NY 10018, U.S.A.
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Hoist Safety & Ordering Information
Hoist Safety:
1. Choose the Right Hoist for the Job
Choose a hoist with the capacity for the job. Know
the capacities of your hoists and the weight of
your loads.
Then match them.
The application, the size and type of load, the
attachments to be used, and the period of use
must also be taken into consideration in selecting
the right hoist for the job.
Remember the hoist was designed to ease our
burden and carelessness not only endangers the
operator, but in many cases, a valuable load.
2. Inspect
All hoists should be visually
inspected before use, in
addition to regular, periodic
maintenance inspections.
Inspect hoists for operation
warning notices and legibility.
Deficiencies should be noted
and brought to the attention of
supervisors. Be sure defective
hoists are tagged and taken out of service until
repairs are made.
Under no circumstances should you operate a
malfunctioning hoist.
Check for gouged, twisted, distorted links, and
foreign material. Do not operate hoists with
twisted, kinked, or damaged chain links.
The ABC’s on how to
choose the right hoist for
your application
key questions you should be ready to answer
when you order a hoist.
Whatever the lifting need, CM has the right
hoist to move the load. Your factory-trained CM
representative stands ready to help you select the
right CM hoist for the job.
Hoists are tremendous aids in efficient and safe
lifting and material handling operations. All CM
hoists are engineered to deliver powerful, efficient
and reliable operation. With proper use and
To order CM hoists, chains and hoist accessories,
maintenance, CM hoists offer excellent service.
please call the number listed above. See charts
That’s why selecting the proper hoist for the
that follow for key ordering information.
application is a critical decision. Here are some
How to Order A Hoist
A Ordering Lever
Operated Hoists
B Ordering
Hand Hoists
• What type of upper/lower
hook - standard, special
or Latchlok hook?
• What are you moving
or lifting?
• Is overload indicator
or protection required?
• How much does the load
weigh (capacity)?
• How much lift is required
(in feet)?
• Do you need a short
or long handle?
• What type of suspension
(hook or trolley mount)?
• What are you moving
or lifting?
• Do you know the weight?
• How much lift is required
(in feet)?
• How long is the hand chain
drop (in feet)?
• Any special requirements?
Load chain should be properly lubricated.
Hooks that are bent, worn, or whose openings
are enlarged beyond normal throat opening
should not be used. If latch does not engage
throat opening of hook, hoist should be taken
out of service.
C Ordering Powered Hoists
What size beam will the
trolley operate on?
Chains should be checked for deposits of
foreign material which may be carried into
the hoist mechanism.
What type of suspension
(rigid hook, swivel hook,
lug mount, plain, geared
or motor driven trolley)?
Check brake for evidence of slippage under load.
3. Use Hoist Properly
Be sure hoist is solidly held in the uppermost part
of the support hook arc.
Be sure hoist and load are in a straight line.
Do not pull at an angle.
What is the headroom
requirement?
What capacity
is required?
Be sure load is hooked securely. Do not tip load
the hook. Do not load hook latch. Hook latch is to
prevent detachment of load under slack chain
conditions only.
Do not operate with hoist head resting against
any object. Lift the load gently. Do not jerk it.
4. Practice Caution Always
Do not lift co-workers with a hoist.
Make sure everyone is clear of the load when
you lift.
Do not remove or obscure operational warning
notices.
Do you require a
two-speed or
single-speed
electric hoist
and/or trolley?
Do you require
a variable-speed
air hoist?
5. Operator Service
CLEANING: Hoists should be kept clean and free
of dust, dirt, moisture, etc., which will in
any way affect the operation or safety of
the equipment.
LUBRICATION: Chain should be
properly lubricated.
What control function
is required?
Will the hoist be used under
unusual environmental
conditions (weatherproofing, acid proofing, or
other)?
WWW.HANESSUPPLY.COM
Is a trolley
break required?
How will the hoist be
powered (air, electric,
cord reel, conductor
bar, festoon, etc.)?
What is your
application?
Is a chain
container
required?
What lifting speed
do you require?
How long is the
lift (in feet)?
Standard or
Latchlok hook?
10
What voltage is required?
Special electrification needs?
10- 2
Hoists
AFTER REPAIRS:
Carefully operate the
hoist before
returning it to full
service.
What length of
cord is required?
What trolley
speed is required?
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
I-Beams Specs/Hand Chain Pullers
I-Beam Specifications
This table shows the standard sizes, flange widths, and weights for both
American Standard and Wide Flange I-beams.
I-beams designated with an asterisk (*) denote New Series specifications
which conform ASTM A6 standards, effective September 1,1978.
When ordering a Hoist Trolley, be sure to include:
• Total rated load (lbs.)
• I-beam weight per foot (lbs.)
• Required trolley speed (Ft./Min.)+
• Trolley model number
• Motor Voltage+
• Hoist model number
• I-beam height (in.)
• MT series trolleys only
American Standard
Wide Flange
• I-beam flange width (in.)
Pat Track Beam
H
(Norm.)
American Standard
Wt.
H Per Ft.
W
(in) (lbs)
(in)
4
7.7 2.663
9.5 2.796
4
5
10
3.004
5
14.75 3.284
6
12.5 3.332
17.25 3.565
6
7
15.3 3.662
7
20
3.860
8
18.4 4.001
23
4.171
8
10
25.4 4.661
35
4.944
10
12
31.8 5
12
35
5.078
12
40.8 5.252
12
50
5.477
15
42.9 5.501
15
50
5.640
18
54.7 6.001
18
70
6.251
20
65.4 6.25
20
75
6.385
20
86
7.060
20
96
7.200
24
79.9 7.001
24
90
7.125
24 100
7.245
24 105.9 7.875
24 121
8.050
Hoists
10
10-3
Wt.
H Per Ft.
(in) (lbs)
6
8.5
6*
9
6
12
6* 12
6
16
6* 16
6* 15
6
15.5
6
20
6* 20
6
25
6* 25
8
10
8* 10
8
13
8* 13
8
15
8* 15
8
17
8* 18
8
20
8* 21
8
24
8* 24
8
28
8* 28
8
31
8* 31
8
35
8* 35
8
40
8* 40
8
48
8* 48
8
58
8* 58
8
67
8* 67
10
11.5
10* 12
10
15
10* 15
10
17
10* 17
10
19
10* 19
10
21
10* 22
10
25
10* 26
10
29
10* 30
10
33
10* 33
10
39
10* 39
10
45
10* 45
10
49
10* 49
10
54
10* 54
10
60
10* 60
10
66
10* 68
10
72
W
(in)
3.940
4
4
4
4.030
4.030
5.990
5.995
6.020
6.018
6.080
6.080
3.940
3.940
4
4
4.015
4.015
5.250
5.250
5.268
5.270
6.495
6.5
6.535
6.535
7.995
7.995
8.020
8.020
8.070
8.070
8.110
8.110
8.220
8.220
8.280
8.280
3.950
3.960
4
4
4.010
4.010
4.020
4.020
5.75
5.75
5.762
5.770
5.799
5.810
7.960
7.960
7.985
7.985
8.020
8.020
10
10
10.030
10.030
10.080
10.080
10.117
10.130
10.170
W
Wide Flange
Wt.
H
Per Ft. W
(in)
(lbs)
(in)
10
77
10.190
10* 77
10.190
10* 88
10.625
10
89
10.275
10 100
10.340
10* 100
10.340
10 112
10.415
10* 112
10.415
12
14
3.968
12* 14
3.970
12* 16
3.990
12
16.5 4
12
19
4.005
12* 19
4.007
12
22
4.030
12* 22
4.030
12* 26
6.490
12
27
6.497
12* 30
6.520
12
31
6.525
12* 35
6.560
12
36
6.565
12
40
8
12* 40
8.005
12
45
8.042
12* 45
8.045
12
50
8.077
12* 50
8.080
12
53
10
12* 53
9.995
12
58
10.014
12* 58
10.010
14
22
5
14* 22
5
14
26
5.025
14
26
5.025
14
30
6.730
14* 30
6.730
14
34
6.75
14* 34
6.745
14
38
6.770
14* 38
6.770
14
43
8
14* 43
7.995
14
48
8.031
14* 48
8.030
14
53
8.062
14* 53
8.060
14
61
10
14* 61
9.995
14
68
10.035
14
68
10.035
14
74
10.072
14* 74
10.070
14
78
12
14
87
14.500
14* 82
10.130
16
26
5.5
16
31
5.525
16* 31
5.525
16
36
6.992
16* 36
6.985
16
40
7
16* 40
6.995
16
45
7.039
16* 45
7.035
16
50
7.073
H
(Norm.)
CM Short Handle Puller
• Easy one-hand operation.
• Lever pull range is 45 to 62 pounds to lift full load.
• Handle that rotates 360°, making it easy to operate
in any position and in small spaces.
• Tough yet lightweight aluminum construction and
powder coat finish.
• CM® Hoistaloy® hardened steel load chain for
strength, long wear life and flexibility.
• Free chaining for fast, easy attachment to load.
• Forged upper and lower hooks with latches.
• Simple construction with fewer parts for ease of
maintenance.
• Optional Load Limiter® device protects against overload
• Lifetime warranty
• Made in U.S.A.
3/4 ton
Puller
Shown
Also
available in
1-1/2 & 3
ton capacity
W
H
(in)
16*
16*
16
16*
16*
16*
16*
16
16
18
18*
18
18*
18*
18
18
18*
18
18*
18
18*
18*
18
18
18
18*
18*
18*
18*
18*
18
21
21*
21*
21*
21
21
21*
21
21*
21
21*
21*
21*
21
24
24*
24*
24
24*
24
24*
24
24*
24
24*
Wt.
Per Ft.
(lbs)
50
57
58
67
77
89
100
88
96
35
35
40
40
46
45
50
50
55
55
60
60
71
64
70
77
76
86
97
106
119
96
44
44
50
57
55
62
62
68
68
73
73
83
93
82
55
55
62
68
68
76
76
84
84
94
94
W
(in)
7.070
7.120
8.464
10.235
10.295
10.365
10.425
11.502
11.5
6
6
6.015
6.015
6.060
7.477
7.5
7.5
7.532
7.530
7.558
7.555
7.635
8.715
8.75
8.787
11.035
11.090
11.145
11.200
11.265
11.75
6.5
6.5
6.530
6.555
8.215
8.240
8.240
8.270
8.270
8.295
8.295
8.355
8.420
8.962
7.005
7.005
7.040
8.961
8.965
8.965
8.990
9.015
9.020
9.065
9.065
Rated Product Std.
Pull to Lever
Hook
Capacity* Code
Lift Reeving Lift Full Length Throat
(tons)
(ft)
Load
(in.)
Opening
(in)
(lbs)
Min.
Approx.
Distance Shipping
Between
Wt.
Hooks (in)
(lbs)
3/4
7300P
5
1
45
12
1-1/32
12-1/4
16
7320P
5
1
55
16-3/4
1-1/8
14-3/4
27
1-1/2
3
7330P
5
2
62
16-3/4 1-3/16
17-5/8
40
* Do not exceed Working Load Limits
®
Optional kits also available - Load Limiter, Anchor Sling & Latchlok Hook. Call Hanes
Supply for complete details.
CM Puller
CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag, or stretch, it features:
• Simple construction with fewer parts for ease of maintenance.
• Tough aluminum alloy construction & powder coat finish.
• Weatherproof for outdoor service.
• Hoistaloy hardened steel link type load chain for strength,
long wear life and flexibility.
• Weatherized Weston-type automatic braking system
for positive load control.
• Easy, one-hand operation and control—only 58 lbs
of pull required for 3/4 ton model capacity.
• Forged upper and lower hooks with latches
standard.
• Free wheeling for fast and easy attachment to load.
• Optional Load Limiter protection device stops transmission of
lever forces protecting against dangerous overload.
• Optional Load Sentry warns of overload condition.
• Optional zinc-plated chain available.
• Unlimited lift.
• Optional shorter lever for 3/4 & 1-1/2 ton units available.
• Upper & lower Latchlok hooks available for all capacities.
• Lifetime warranty.
• Optional anchor sling simplifies attachment that allows anchor hook
to swivel in tight space applications (3/4 & 1-1/2 ton units only).
• Made in U.S.A.
Latchloc
type hook
Product Code Load Rating
5310
5311
5312
5313
5328
5315
5316
5317
5318
5329
5320
5321
3/4 tons
3/4 tons
3/4 tons
3/4 tons
1 ton
1-1/2 tons
1-1/2 tons
1-1/2 tons
1-1/2 tons
2 tons
3 tons
3 tons
Optional
anchor sling
(3/4 &
1-1/2 ton)
Optional
Load
Limiter
Lift/Reach (ft)
Lever Pull to Lift Rated Load
Approx Ship Wt.
5
10
15
20
5
5
10
15
20
5
5
10
33 lbs
33 lbs
33 lbs
33 lbs
44 lbs
51 lbs
51 lbs
51 lbs
51 lbs
68 lbs
77 lbs
77 lbs
15.0 lbs
15.8 lbs
16.6 lbs
17.3 lbs
15.0 lbs
27.0 lbs
31.4 lbs
35.8 lbs
40.2 lbs
27.0 lbs
45.0 lbs
52.3 lbs
† Can be supplied with lifts longer than 5 feet *Do not exceed rated capacity.
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Hand Chain Pullers
CM 653 Series
• Weston type braking system for positive load control
and positioning.
• Simple one-handed, free chaining for fast load
attachment.
• Hardened steel chain for strength and long wear life.
• Forged upper and lower hooks with heavy cast steel
latches.
• Rubber handle grip for added operator comfort.
• Minimal maintenance with no special tools required.
• 5-year warranty against defects in materials and
workmanship.
• Metric rated.
• Meets ASME B30.21 – Manually Lever Operated Hoist
Standard and European CE Standard.
• Designed and manufactured by Columbus McKinnon
Corporation.
The Series 653 lever operated hoist is a high quality,
rugged,steel tool for close quarter pulling, stretching,
and hoisting applications.
Its characteristic short handle, along with minimal
lever pull effort, make this tool ideal for a broad range
of applications.
• Capacities from 3/4 to 6 tons.
• Impact resistant, stamped steel frame, gear case,
and cover for durability and light weight.
• Powder coated finish for added corrosion protection.
• Hardened steel load sharing gears.
• Double pawl arrangement for assured load control.
• Two chain guide rollers for positive chain engagement.
Product Std. Pull to
Min.
Rated
Capacity* Code
Lift† Lift Full Distance
(tons)
(ft)
Loads
Between
(lbs)
Hooks(in)
3/4
4043
5
58
10-3/4
4045
5
89
14-1/4
1-1/2
3
4047
5
95
16-15/16
4050
5
96
21-3/8
6
Lever
Hook
Approx.
length Reeving Throat Shipping
(in)
Openings
Wt.
(in)
(lbs)
21-1/4
1
1-1/32
16
21-1/4
1
1-1/8
16
21-1/4
2
1-7/32
38
21-1/4
4
1-3/4
73
CM Series 602/603 Mini Ratchet Lever Hoist
CM Series 603 & 602 Mini-Hoists are the most compact ratchet lever
hoists in the market:
• Plated load chain is standard.
• Weston-type load brake.
• Rubber hand grip for better comfort and security.
Capacity
Number
of
Model No.
Chainfalls
Handle
Length
(in)
Minimum
Distance
Between
Hooks
(in)
Lift w/
One Full
Lever
Turn (in)
Handle
Pull @
WLL
(lbs)
Standard
Lift
(lbs)
(lbs)
(Kg)
550
250
602
1
6.300
9.45
3.15
56
5.0
1100
500
603
1
6.375
11.125
1.57
78
5.0
• Lightweight design for ease of portability.
Use in confined conditions with one-hand
operation.
• Forged upper and lower hooks with latches
standard.
• Impact resistant, all-steel frame, gear case
and cover.
• Hardened link-type alloy steel load chain
for strength and long wear.
• Free wheeling feature serves to quickly
attach the load.
• Metric rated.
• Made in U.S.A.
Coffing G Series Ratchet Lever Hoists
Coffing G Series Model - Malleable iron roller chain ratchet
lever hoists are efficient and durable. Roller chain can be spliced to
create longer lifts and can handle higher capacities than coil chain.
G Series hoists are ideal for utility transmission and distribution work.
Capacity
lbs
tons
1500
3/4
Model
No.
Standard Strands
Lift
of Load
(in)
Chain
Min
Distance
Between
Hooks
Handle
Length
(in)
Minimum Ave
Net
Handle
Increment
Weight
Effort
(in)
(lbs) (lbs)
56-1/2
1
13
18-3/4
.624/.313
56
14
57
2
15
18-3/4
.313/.156
60
17
FG/FGI
56-1/2
1
16
27-5/8 1.000/.500
116
25
FTG/FTGI
57
2
17-5/8
27-5/8
.500/.250
120
34
9000 4-1/2 ZG-4-1/2
53
3
25
33-5/8
.333
124
49
12000
6
ZG-6
53
4
25
33-5/8
.250
124
59
18000
9
WG-9
60
5
30
33-5/8
.200
124
120
22000
11
WG-11
60
6
30
33-5/8
.167
124
130
26000
13
WG-13
60
7
30
33-5/8
.143
124
140
30000
15
WG-15
60
8
30
33-5/8
.125
124
150
AG/AGI
3000 1-1/2 ATG/ATGI
3000 1-1/2
6000
3
• Capacities & Lift - Rated loads from 3/4 to 15 Tons.
For standard lift, see chart. Other lifts available.
• Rugged - Unit and handle made from malleable iron.
Riveted construction makes the unit tamper-resistant.
• Free Chaining - Free chaining mechanism allows quick and
easy take-up and positioning of slack chain. Hoist will not
free chain when under load.
• Handle Stops - Prevent handle from spinning if it is
accidently released by the operator.
• Single or Double Locking Pawl Design.
• Multiple Rigging Positions - Hoist can lift, pull, or bind.
Can be operated from either side and will work in any
position with equal efficiency.
• Snap Hook & Link - Allows operator to convert unit
to next smaller capacity giving longer lift and faster
operation. Snap hook acts as an end stop
and will not pass through chain sprocket.
• Options - Bullard hooks, bronze hooks,
and zinc-plated hooks - consult factory.
• Lifetime Warranty.
10
10- 4
Hoists
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Hand Chain Pullers
Coffing LSB-B Ratchet Lever Hoist – Stamped Steel – Versatile Performer
Coffing LSB-B Models are available with optional Load Limiters. Also
featuring through-hardened load chain, these stamped steel ratchet lever
hoists are lightweight, durable, and are ideal for construction and
commercial applications. All LSB-B hoists are metric rated.
Capacity
Model Number
Strands
Lift
of Load
(ft.)*
Chain
Minimum
Dist.
Between
Hooks (in.)
Handle
Length
(in.)
Average
Net
Handle
Weight
Effort
(lb.)
(lb.)
(lb.)
(Ton)
1500
3/4
LSB-1500B-5
5
1
11 5/8
9 1/4
46
12
1500
3/4
LSB-1500B-10
10
1
11 5/8
9 1/4
46
14
1500
3/4
LSB-1500B-15
15
1
11 5/8
9 1/4
46
16
1500
3/4
LSB-1500B-20
20
1
11 5/8
9 1/4
46
18
3000 1 1/2
LSB-3000B-5
5
1
13
14 9/16
59
21
3000 1 1/2
LSB-3000B-10
10
1
13
14 9/16
59
24
3000 1 1/2
LSB-3000B-15
15
1
13
14 9/16
59
27
3000 1 1/2
LSB-3000B-20
20
1
13
14 9/16
59
30
6000
3
LSB-6000B-5
5
1
16 5/16
14 9/16
75
35
6000
3
LSB-6000B-10
10
1
16 5/16
14 9/16
75
40
6000
3
LSB-6000B-15
15
1
16 5/16
14 9/16
75
45
6000
3
LSB-6000B-20
20
1
16 5/16
14 9/16
75
50
12000
6
LSB-12000B-5
5
2
22 3/4
14 9/16
76
67
12000
6
LSB-12000B-10
10
2
22 3/4
14 9/16
76
77
12000
6
LSB-1200B-15
15
2
22 3/4
14 9/16
76
88
12000
6
LSB-1200B-20
20
2
22 3/4
14 9/16
76
99
• Capacities & Lift - Rated loads of 3/4, 1-1/2, 3,
and 6 tons, with 5, 10, 15, and 20 foot standard
lifts. Other lifts available.
• Rugged & Lightweight - Impact resistant, stamped
steel housing withstands rigorous use. Compact
design is portable and easy to rig.
• Low Handle Effort - Double reduction gearing
and short, cushioned-grip handle provide easy
operation with minimal handle effort.
• 360O Rotating Handle - Provides versatile rigging
options when used in confined spaces.
• Easy Free Chaining - State-of-the-art free
wheeling mechanism allows quick and easy
one-handed take-up and positioning of slack chain.
• Positive Load Control - Enclosed screw-and-disc
type load brake stays clean and dry for positive
load positioning. Latches on hooks provide
positive load engagement.
• Options- Shipyard hook available for 1-1/2 ton
& 3 ton models.
• Lifetime Warranty.
*Standard lifts shown. Other lifts available - Consult factory.
Note: For complete dimensional data, refer to Coffing Dimensional Databook.
Harrington LX Lever Puller
1/4 and 1/2 Ton Capacities
Harrington’s LX lever pullers are ultra lightweight and compact yet extremely
durable. Known as the perfect “toolbox hoists”, these little hoists have all the
power you need to get the job done. Revolutionary 1/2 Ton model is the only
1/2 Ton “toolbox” sized puller in the industry.
Capacity Product Headroom
(tons) Code
(in)
Load Chain
Weight
Standard Pull to
Net
Ship
Dia (mm) x
for Add
Lift Lift Load
Weight Weight
Chain Fall Lines
1 ft of Lift
(ft)
(lbs)
(lbs)
(lbs)
(in)
(lbs)
1/4
LX003
8.1
5
40
3.2 x 1
3.5
4.0
0.15
1/2
LX005
9.7
5
62
4.3 x 1
5.7
6.2
0.25
• Capacities 1/4 Ton and 1/2 Ton
• Compact, low headroom design makes it a perfect
tool for use in tight quarters
• Low pulling force required for ease of use
• Effortless to transport, install & store
• Free-chain mechanism for quick adjustments
• Rugged die-cast aluminum body with steel frame
Harrington LB Lever Hoists
Harrington’s LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded
as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing,
shipbuilding, and day-to-day maintenance and repair.
• 5-foot lift is standard, 10-, 15-and 20-foot lifts also stocked; nonstandard lifts available as well.
• Grade 100 heat-treated load chain is nickel plated for corrosion resistance.
• Forged and heat-treated alloy steel
Harrington LB Level Hoists 3/4, 1, 1-1/2, 2-3/4, 3, 6, and 9 Ton Capacities
hooks open slowly without
Weight for
fracturing under excessive loads.
Load Chain
Net
Shipping
Additional
Product Headroom C Std. Lift Pull to Lift
Top and bottom hooks rotate 360.˚
Diameter (mm) x Weight Weight ApCap. (Tons)
Code
(in)
(ft)
Loads (lbs)
One Foot of
Chain Fall Lines
(lbs.)
prox. (lbs)
• Test certificate verifies that every
Lift (lbs)
hoist has been factory load tested
3/4
LB008
11.0
5
54 (36)
5.6 X 1
13
13
0.5
to 125% of rated capacity,
1
LB010
11.8
5
72 (46)
5.6 X 1
13
14
0.5
in accordance with ASME B30.21
1 1/2
LB015
13.2
5
64 (45)
7.1 X 1
18
18
0.7
requirements.
Hoists
10
2
LB020
14.8
5
59 (42)
8.8 X 1
25
26
1.1
2 3/4
LB028
14.8
5
81 (57)
8.8 X 1
25
26
1.1
3
LB030
15.6
5
69
10.0 X 1
33
35
1.5
6
LB060
21.3
5
72
10.0 X 2
57
60
3.2
9
LB090
26.8
5
78
10.0 X 3
88
93
4.7
10-5
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Hand Chain Pullers
CM Oil Field Puller
Coffing GT Model Wire Rope Lever Tool
The CM Oil Field Puller can be used to pull, lift, drag,
or stretch. The rugged design is used in heavy-duty
construction, industrial applications, or any tough
outdoor service. The heavy duty jaw shackles make
attaching large or multiple slings very simple and easy.
• Capacities of 3/4 & 1-1/2 ton.
• Tough aluminum alloy construction
& powder coat finish.
• Simple construction with fewer parts for ease
of maintenance and lower inventories.
• Hoistaloy hardened steel link type load chain
for strength, long wear life and flexibility.
• Weatherized weston-type automatic braking system
for positive load control.
• Easy, one-hand operation and control — only 58 lbs
of pull required for 3⁄4 ton model capacity.
• Free wheeling for fast and easy attachment to load.
• Optional zinc-plated chain available.
• Lifetime warranty.
• Metric rated.
• Made in U.S.A.
Rates
Standard Lift Full
Product
Capacity
Lift
Loads
Code
(tons)
(ft)
(lbs)
Minimum
Distance
Between
Hooks
(in)
The Coffing GT Models - Designed
for heavy-duty pulling, rigging,
dragging, stretching, and lifting
applications. Its versatility and
ability makes it perfect for use in
the construction and transportation
industries, as well as hundreds of
other industrial applications.
Coffing GT models are lightweight,
compact, and built tough for long
life and trouble-free service.
GT-1300-32
• Capacities - Rated loads from
1 to 3 Tons. 32' of wire rope
on 1 and 3 Ton models, 6'
of wire rope on 2 Ton models.
GT-2000-65
• Smooth Operation - Large
surface area of dual clamping
jaws provide an evenly
distributed grip for smooth
operation and low wear.
GT-3500-32
• Lifetime warranty.
Approx
Lever
Shackle
Ship
Length Reeving Opening
Weight
(in)
(in)
(lbs)
3/4
4053
5
58
10-3/4
21-1/4
1
1.13
16
1-1/2
4055
5
89
14-1/4
21-1/4
1
1.25
26
Coffing A & AD Ratchet Lever Load Binders
Incremental Take-Up for Proper Tensioning
Coffing A and AD Models - Roller chain load binders provide quality
and durability. Unlike over-center binders, the ratchet and pawl design
protects the operator by providing incremental take-up for proper
tensioning and securing of the load.
• Capacities & Lift Rated loads from
3/4 to 1-1/2 Tons.
For standard lift, see chart.
• Convertible - Double-chain
model converts to single-chain.
• Lifetime Warranty.
Standard Wire
Lever
Lever
* Rope
Wire
Rope Length Length
Advance
Rope
Dia Extended Retracted
(in)
Length (ft) (in)
(in)
(in)
Rated
Cap.
(tons)
Model
No.
Product
Code
Overall
Dimensions
(in)
1
GT-1300-32
0013
32
5/16
29.1
21.3
1.30
19.7 x 9.1 x 4.0
2
GT-2000-65
0020
65
7/16
29.1
21.3
1.45
24.8 x 13.0 x 5.9
3
GT-3500-32
0035
32
5/8
29.1
21.3
0.78
28.6 x 12.8 x 7.0
* Per full stroke at rated load.
3/4 - 1-1/2 Ton
Made in USA
Load
Working
(lbs)
1,500
3,000
Strands
Min.
Limit Ultimate
Std.
of
Dist.
Proof Strength
Take-Up Load
Betw.
(lbs)
(lbs) Model
(in)
Chain Hooks (in)
3,000 7,500
A
19-1/2
1
15-1/2
6,000 15,000
AD 20
2
16-3/4
Handle Take-Up
Net
Length Increment Wt.
(in)
(in)
(lbs)
19-1/4
5/8
11-1/2
19-1/4
5/16
14-1/2
NOTE: A and AD models feature 3/8" roller chain and grab hooks with 1/2" throat opening.
Please call for complete dimensional data.
10
10- 6
Hoists
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Hand Chain Hoists
CM Cyclone Hand Chain Hoist
One of the most popular and reliable hoists ever designed, the CM Cyclone
combines superior engineering, efficiency, and durability. Available in
a variety of capacities from 1/4 ton to 10 tons, CM Cyclone features:
• Most interchangeability of parts in the industry.
• Standard Load Limiter for simple, automatic overload protection.
• Enclosed contoured Weston-type automatic brake for positive load control.
• High-efficiency spur gearing for greater lift with minimum effort.
• Rugged CM Hoistaloy chain for added strength and durability.
Rated
Cap.*
(tons)
Product
Code
1/4
1/2
1
1-1/2
2
3
4
5
6
8
10
4621
4622
4624
4625
4626
4627
4628
4629
4630
4631
4632
Std. Reeving
Lift †
(ft)
8
8
8
8
8
8
8
8
8
8
8
1
1
1
1
1
2
2
3
3
4
5
Min.
distance
between
hooks (in)
12-7/8
12-7/8
14
17-5/16
17-5/16
21-1/2
21-1/2
24-1/4
25-1/4
34-1/2
35-1/2
Chain
overhauled
to lift load
one foot (ft)
22-1/2
22-1/2
30
40-1/2
52
81
104
156
156
208
260
Chain pull
to lift full
load (lbs)
Shipping
Wt.
(lbs)
23
46
69
80
83
85
88
75
90
89
95
37
37
40
65
64
96
96
128
132
235
249
• Fully machined, forged liftwheel pockets for easier
lifting and smooth free chaining.
• High-strength aluminum alloy castings in frame
and covers.
• Inspected over 75 times to meet or exceed HMI
and ASME/ANSI performance and safety standards.
• Standard hand chain drop is 2 feet less than lift,
(example: 8 foot lift hoist has 6 foot hand chain drop.)
• Lifetime warranty
• Made in U.S.A.
3 and 4 ton
capacity
5 & 6 ton
capacity
8 ton
capacity
10 ton
capacity
1/4 to 2 ton
capacity
† Can be supplied with longer lifts–contact us with your exact needs.
CM Series 622 Hand Chain Hoist
• CM Series 622 has a simple, efficient,
economical design.
• Equipped with hardened load chain for
flexibility and long wear.
• Compact design, low headroom,
and lightweight for easy installation, even
in confined spaces.
• Weston-type load brake requires
no lubrication.
• Hans wheel cover with guide slots
minimizes jamming and slipping.
!
• Forged swivel hooks with latches
reduce twisting of chain and
unintentional unhooking of load
when chain is slack.
• Standard hand chain drop is 2 feet
less than lift (example: 8 foot lift hoist
has 6 foot hand chain drop).
• One-year warranty.
• Imported.
WARNING
Overloading and improper use can result in injury.
To avoid injury:
• Do not exceed working load limit, load rating, or capacity.
• Do not use to lift people or loads over people.
• Use only alloy chain and attachments for overhead lifting.
• Read and follow all instructions.
Product
code
Rated
Cap.*
(tons)
Std.
lift
(ft)
Chain Pull
to Lift Rated
Load
(lbs)
2255
2208
2231
2263
2256
2204
2262
2264
2258
2213
2233
2272
2259
2223
2214
2260
2257
2234
2277
1/2
1/2
1/2
1/2
1
1
1
1
2
2
2
2
3
3
3
5
5
5
5
10
15
20
30
10
15
20
30
10
15
20
30
10
15
20
10
15
20
20
53
53
53
53
77
77
77
77
82
82
82
85
65
65
65
105
105
105
105
Hand chain Approx.
Overhauled Shipping
to Lift Load Wt. (lbs)
One Foot (ft)
29
29
29
29
37
37
37
37
80
80
80
80
154
154
154
147
147
147
289
18
25
30
38
26
30
38
48
61
71
80
85
89
99
109
91
107
123
170
CM Cyclone Army Type Trolley Hoist
Same quality and performance as the CM Cyclone in a compact, low
headroom integral trolley mount. Ideal for applications requiring a moveable
hoist including:
• Rugged steel loadbars connected directly to hoist frame.
• Reduced headroom, side clearances, and end approach for easy
maneuvering of heavy loads in tight places.
• Standard Load Limiter automatic overload protection.
• Plain and geared trolley mounts in capacities from 1/4 to 12 tons.
• Universal tread trolley wheels for operation on sloped or flat flanged beams.
Product Code
Hoists
10
Rated
Cap.* Plain Geared
(tons) Trolley Trolley
1/4
4521
4541
1/2
4522
4542
1
4524
4544
1-1/2 4525
4545
2
4526
4546
3
4527
4547
4
4528
4548
5
4529
4549
6
4530
4550
8
4531
4551
10
4532
4552
12
4533
4553
10-7
• Standard hand chain drop 2 feet less than lift (example: 8 foot lift hoist
has 6 foot hand chain drop.)
• Chain containers, zinc-plated load and hand chain, aluminum unwelded
hand chain, Latchlok hooks, bronze hooks, bullard hooks, larger beam
trolleys, trolley guards, and units without Load Limiter optional,
depending on capacity.
• Lifetime warranty.
• Made in U.S.A.
Beam
Chain
Chain
American Adjustment
Pull
Overhauled
Min.
Std.
Standard
Ranges
to Lift
to Lift
Min.
Radius
Lift
Depth
Flange Width Capacity
Load One Headroom Curve
(ft) Reeving (in) †
(in) †
Loads (lbs)
Foot (ft)
(in)
(in)
8
1
4-12**
2-5/8 – 5-1/2
23
22-1/2
11-3/4
30
8
1
4-12**
2-5/8 – 5-1/2
46
22-1/2
11-3/4
30
8
1
4-12**
2-5/8 – 5-1/2
69
30
11-3/4
30
8
1
6-15
3-3/8 – 5-5/8
80
40-1/2
15-5/16
30
8
1
6-15
3-3/8 – 5-5/8
83
52
15-5/16
30
8
2
7-15
3-3/8 – 5-5/8
85
81
8-7/8
48
8
2
7-15
3-3/8 – 5-5/8
87
104
18-7/8
48
8
3
8-18
4 – 6-1/4
74
156
23-1/2
60
8
3
8-18
4 – 6-1/4
89
156
24
60
8
4
12-24
5–8
91
208
28-1/4
72
8
5
12-24
5–8
93
260
28-1/4
72
8
6
15-24
5-1/2 – 8
95
312
30-3/8
96
Shipping
Wt. (lbs)
Plain
Trolley
66
66
78
136
136
182
182
268
273
506
513
1,050
WWW.HANESSUPPLY.COM
Geared
Trolley
108
108
130
164
164
230
230
300
305
589
596
1,130
**For 1/4 through 1 ton geared
trolleys - minimum beam size
S6 x 12.5 (3-3/8 flange width)
† Universal tread track wheels
designed to operate on either
sloped or flat flange beam, rails
or tracks
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Hand Chain Hoists
CM Cyclone Low Headroom Trolley Hoist
CM Cyclone and trolley all in one unit for low headroom applications features:
• Crowned tread and flanged wheels to minimize rolling friction.
• Simple, efficient design.
• Reduced headroom, side clearances, and end approach for easy
maneuvering of loads in tight places.
• Plain trolley mounts in capacities from 1/2 to 6 tons.
• Geared trolley mounts in capacities from 1-1/2 to 6 tons.
• Standard hand chain drop 2 feet less than lift (example: 8 foot lift hoist
has 6 foot hand chain drop).
Product Code
Rated
Cap.* Plain Geared
(tons) Trolley Trolley
4832
—
1/2
1
4834
—
1-1/2 4835
4925
2
4836
4926
3
4837
4927
4838
4928
4
5
4839
4929
6
4840
4930
American
Std.
Standard
Lift
Depth
(ft) Reeving (in) ††
8
1
6-12**†
8
1
6-12**†
8
1
7-15**†
8
1
7-15†
8
2
7-15†
8
2
8-24†
8
3
8-24†
8
3
8-24†
• Chain containers, zinc-plated load and hand chain, aluminum unwelded
hand chain, Latchlok hooks, bronze hooks, bullard hooks, larger beam
trolleys, trolley guards, and units without Load Limiter optional, depending
on capacity.
• Standard Load Limiter/automatic overload protection.
• Lifetime warranty.
Geared Trolley
• Made in U.S.A.
Plain Trolley
Beam
Chain
Chain
Shipping
Adjustment
Pull
Overhauled
Min.
Wt. (lbs)
Ranges
to Lift
to Lift
Min.
Radius
Flange Width Full Loads Load One Headroom Curve
Plain Geared
(in)
(lbs)
Foot (ft)
(in)
(in)
Trolley Trolley
3-3/8 – 5
46
22-1/2
8-7/8
36
88
—
3-3/8 – 5
69
30
9-1/4
36
93
—
3-5/8 – 5-1/2
80
40-1/2
12-1/2
48
186
210
3-5/8 – 5-1/2
83
52
12-1/2
48
186
216
3-5/8 – 5-1/2
85
81
14-1/8
48
203
233
4–7
88
104
16-3/4
96
308
372
4–7
75
156
18-1/4
96
328
370
4–7
90
156
18-3/4
96
333
375
**1/2 and 1 ton also available for 4" and 5" S-beam, and 1-1/2 and 2 ton for 6" S-beam without extra charge.
† Universal tread trackwheels designed to operate on either sloped or flat flange beams, rails, or tracks. Also can be used on flat flange
beams within the same range of flange widths, provided beam depth will accommodate wheel diameter (check clearance diagram).
†† Applies to minimum size S-beam within adjustability range.
CM Hurricane 360° Hand Chain Hoist
CM Hurricane unleashes a full circle of flexibility for lifting and pulling.
Rated Standard
Product
Net Weight
Capacity
Lift
Code
(lbs)
(tons)
(ft)
Hand Chain
Pull to Lift
Rated Load
Hand Chain
Overhaul to Lift
Rated Load
• Standard Load Limiter - For simple, automatic overload protection.
5623A
1/2
10
• Braking Power - Weston style braking system provides reliable positive
load control.
5624A
1/2
15
23
44 lbs
30 lbs
28
44 lbs
5625A
1/2
30 lbs
20
33
44 lbs
5651A
30 lbs
1/2
30
43
44 lbs
30 lbs
5626A
1
10
26
54 lbs
49 lbs
• Heat Treated Steel Gearing - All internal gears and pinions
are heat treated steel for high strength and long life.
5627A
1
15
33
54 lbs
49 lbs
5628A
1
20
41
54 lbs
49 lbs
• Chain Guide and Stripper - Assures load chain alignment.
5653A
1
30
58
54 lbs
49 lbs
5629A
2
10
45
74 lbs
71 lbs
• Precision 4-Pocket Liftwheel - Fully machined for better chain
fit and reduced wear allowing for accurate movement of the load chain.
5630A
2
15
48
74 lbs
71 lbs
5631A
2
20
51
74 lbs
71 lbs
• Hardened Steel Chain - Alloy steel load chain assures high
strength and long wear life.
5635A
3
10
68
92 lbs
87 lbs
5636A
3
15
79
92 lbs
87 lbs
5637A
3
20
90
92 lbs
87 lbs
5639A
5
10
122
76 lbs
174 lbs
• Powder Coated Finish - For corrosion protection.
• Minimal Maintenance - Easily disassembled, requiring
no special tools.
5640A
5
15
142
76 lbs
174 lbs
• Meets ASME B30.16 - And European CE Standard
5641A
5
20
162
76 lbs
174 lbs
• 5-Year Warranty - Against defects in materials and workmanship.
5643A
10
10
210
102 lbs
261 lbs
5644A
10
15
240
102 lbs
261 lbs
5645A
10
20
270
102 lbs
261 lbs
Harrington CX Mini Hand Chain Hoists
1/4 Hand Chain Hoist
Harrington’s CX mini hand chain hoist is the world’s smallest
industrial hoist. This uniquely compact and lightweight hoist is
the perfect choice for jobs with light loads in high or difficult to
reach places such as duct installation, plumbing and heating,
home automobile maintenance, and crane repair.
• Unique design is extremely compact and lightweight.
• Durable stainless steel hand chain.
• Strong hook latches include safety tip.
• Available in 10-foot or 20-foot lifts.
• Sold individually or in convenient 4-packs.
• Test certificate verifies that every hoist has been factory load tested to
125% of rated capacity in accordance with ASME B30.16 requirements.
• Aluminum body with steel frame provides superior strength.
• Load limiter prevents the hoist from being used to lift
damaging loads beyond rated capacity.
• Very low force is required to lift load.
• Effortless to transport, install and store.
Prod.
Code
CX003
CX003
Std.
Lift
(Ibs)
10
20
Pull to
Lift
Load
Ratio
33
33
Overhaul
Fall
Lines
34
34
Load Chain
Dia. (mm)
x Chain
Fall Lines
3.2 x 1
3.2 x 1
Net
Wt.
(Ibs)
5.6
9.5
Ship
Wt. for
Wt. Add’l One
Approx. Foot of Lift
(Ibs)
(Ibs)
6.1
0.3
10.0
0.3
10
Weights are approximant.
WWW.HANESSUPPLY.COM
10- 8
Hoists
• Grade 100, nickel-plated load chain is corrosion
and wear resistant.
Cap.
(tons)
1/4
1/4
Headroom
(in)
8.5
8.5
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Hand Chain Hoists/Manual Trolleys
Harrington CB Hand Chain Hoists
1/2 Hand Chain Hoist
Harrington CB hand chain hoists combine a rugged exterior
shell with machined interior components to handle your most
demanding lifting operations. An efficient drive train minimizes
manual effort, while double enclosed brake cover, standard
slip clutch, and double pawl springs enhance performance
and reliability.
Cap.
Prod.
(tons) Code
1/2
CB005
1
CB010
1-1/2 CB015
2
CB020
2-1/2 CB025
3
CB030
5
CB050
8
CB080
10
CB100
15
CB150
20
CB200
30
CB300
40
CB400
50
CB500
80
CB800
100
CB1000
• Experience exceptional durability thanks to all-steel construction
featuring rugged gear case enclosure and handwheel cover.
• Enjoy increased lifting height thanks to low headroom.
• Compact design results in light-weight and easy portability.
• Minimize manual effort thanks to efficient drive train.
• Standard slip clutch device prevents the hoist from being
used to lift damaging loads beyond rated capacity.
• Double pawl springs provide redundancy for reliable
operation of brake mechanism.
Headroom
(in)
11.2
11.6
13.8
14.8
16.5
20.1
23.6
30.3
29.9
40.2
46.5
51.2
58.3
61.4
100.8
125.2
Std.
Lift
(Ibs)
8
8
8
8
8
8
8
8
12
12
12
12
12
12
12
12
Pull to
Lift
Load
Ratio
48
58
70
72
66
72
68
75
72
74
72 x 2
86 x 2
86 x 2
98 x 2
86 x 4
98 x 4
Overhaul
Fall
Lines
25
43
57
70
99
114
198
297
396
594
396 x 2
495 x 2
693 x 2
792 x 2
693 x 4
792 x 4
Load Chain
Dia. (mm)
x Chain
Fall Lines
5.0 x 1
6.3 x 1
7.1 x 1
8.0 x 1
9.0 x 1
7.1 x 2
9.0 x 2
9.0 x 3
9.0 x 4
9.0 x 6
9.0 x 8
9.0 x 10
9.0 x 14
9.0 x 16
9.0 x 28
9.0 x 32
Ship
Wt. for
Net
Wt. Add’l One
Wt. Approx. Foot of Lift
(Ibs)
(Ibs)
(Ibs)
22
23
1.0
25
26
1.2
32
33
1.4
41
43
1.6
56
58
1.8
49
53
2.1
85
89
3.0
124
131
4.2
186
203
5.5
346
368
7.9
524
678
10.9
690
889
13.3
1068
1398
18.2
1422
1752
20.6
3392
36.3
6525
41.2
Note: Special lengths of load and hand chain available upon request.
Weights are approximant.
• Get reliable braking with double enclosed brake cover
that keeps out dust, rain, and dirt.
Coffing LHH Hand Chain Hoists
Coffing LHH Models - Stamped steel hand chain hoists are an excellent
low cost option in the Coffing line. The compact, lightweight design is ideal
for construction and contractor applications where portability and easy
rigging are critical.
Capacity
(lbs) (tons)
1,000 1/2
2,000
1
3,000 1-1/2
4,000
2
6,000
3
10,000
5
16,000
8
20,000 10
24,000 12
30,000 15
40,000 20
50,000 25*
60,000 30*
80,000 40*
100,000 50*
Model †
LHH-1/2
LHH-1
LHH-1-1/2
LHH-2
LHH-3
LHH-5
LHH-8
LHH-10
LHH-12
LHH-15
LHH-20
LHH-25
LHH-30
LHH-40
LHH-50
Lifts
(ft)**
10/15/20
10/15/20
10/15/20
10/15/20
10/15/20
10/15/20
10/20
10/20
10/20
10/20
10/20
10
10
10
10
Strands Min.
Ave.
of
HeadOverhaul
Load
room
for 1 Ft.
Chain
(in)
Lift (ft)
1
10-1/4
32
1
11-13/16
56
1
13-9/16
75
1
15
75
1
17-1/8
95
3
22-5/8
203
3
32-1/2
312.5
3
32-1/2
312.5
5
50-5/8
526
5
50-5/8
526
6
52-3/8 312.5 x 2 †
8
52-3/8 416.7 x 2 †
10
65
526.3 x 2 †
14
73-5/16 714.3 x 2 †
20
77-5/8
1000 x 2 †
Net Pull
to Lift
Rated
Load (lbs)
55
53
65
74
84
79
77
95
84
103
99 x 2 †
97 x 2 †
104 x 2 †
101 x 2 †
104 x 2 †
Wt. for
10 Ft.
Lift
(lbs)
19
25
36
45
66
75
158
158
328
328
535
680
945
1,400
1,840
*25, 30, 40, and 50 Ton models available by special order - call for more details.
** Standard lifts shown. Other lifts available - call for more details.
† LHH-20 through LHH-50 models have two hand chains.
NOTE: Please call for complete dimensional data.
• Capacities & Lift - Rated loads from 1/2 to 20 Tons in
stock with standard lifts of 10, 15, and 20 feet. Standard
hand chain drop is 2-feet less than lift. Other lifts, hand
chain drops, and 25 - 50 Ton models available - Please
call for details.
• Compact & Light Weight - Designed for portability and
easy installation. Compact gear housing provides low
headroom.
• Easy to Operate - Lubricated bearings and bushings,
bearing mounted pinions, and heat-treated spur
gearing ensure smooth and efficient operation
with minimal effort.
• Safety & Load Control - Mechanical load brake engages
instantly for precise load holding and positioning.
360-degree swivel hooks with safety latches for positive
load engagement.
• Durable - Through hardened load chain provides added
strength and wear resistance for greater chain life.
Stamped steel housing withstands rugged conditions.
• Easy to Maintain - Designed for easy inspection and
maintenance. Hoist can be dismantled easily
with simple hand tools.
• Lifetime Warranty.
1/2 - 50 Ton
Coffing CTA Trolley
Coffing CTA Model - Available in plain and geared models which can be
modified to fit a wide range of beam sizes and styles. The CTA is designed
to provide easy operation and superior performance in industrial lifting
applications.
• Capacities - Rated loads from 1/4 to 5 Tons in plain and geared models.
Geared trolleys have standard 6-foot hand chain drop. Other hand chain
drops available.
• Rugged - Designed to provide superior performance and long,
efficient service.
Capacity
Hoists
10
Lbs.
500
1,000
2,000
4,000
6,000
8,000
10,000
Tons
1/4
1/2
1
2
3
4
5
Std.
Model
Beam Ht.
No.*
(in)
CTA-05P(G)
6-18
CTA-10P(G)
6-18
CTA-20P(G)
6-18
CTA-40P(G)
6-18
CTA-60P(G)
6-18
CTA-80P(G)†
6-18
CT-100P(G)†
6-18
I-Beam
Width
(in)
3.33-7.00
3.33-7.00
3.33-7.00
3.33-7.00
3.33-7.00
3.33-7.00
3.33-7.00
Min.
Radius
Curve (in)
48
48
48
48
48
**
**
Net Wt. (lbs)
Plain
Geared
(P)
(G)
46
52
46
52
46
52
46
52
46
57
125
130
125
130
* When ordering, specify “P” for plain trolley or “G” for geared trolley.
**Standard model for straight track only. Articulating model for 4-foot minimum
radius curve available - call for more information.
† Eight-wheel trolley design - reduces beam flange stress
NOTE: Please call for complete dimensional data.
10-9
• Easy Operation - Lowest rolling effort of Coffing
trolley lines.
• Universal Mounting - Clevis accepts all Coffing
hook-mounted hoists, or lug-mounted hoists
attach directly to load pins.
• Adjustable - Trolley easily adjusts to fit any beam
flange within range of adjustment.
• Wrap-Around Side Plates - Act as safety lugs
to increase operator safety and bumpers
to protect wheels.
• Dual Tread Wheels - Fully machined wheels
fit any tapered beam flange within range of
adjustment. Wheels include permanently
lubricated, shielded ball bearings for long
life and low maintenance.
• Options - Spark resistant and corrosion
resistant wheels available. Track clamps
available on 1/4 to 4 Ton models.
• Lifetime Warranty.
WWW.HANESSUPPLY.COM
1/4 - 5 Ton
Made in
USA
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Manual Trolleys
Coffing CBT Trolley
Coffing CBT Model - Available in plain and geared models, the CBT is the
economical choice for most applications. The trolley features steel wrap
around side plates, dual tread wheels, and lifetime lubricated shielded ball
bearings. All the CBTs’ features combine to ensure you a trolley that is
smooth rolling, versatile, and reliable.
• Capacities - Rated loads from 1/4 to 5 Ton (Metric Rated). In plain
and geared models.
• Economical - Excellent low cost choice for manual and powered hoists.
Capacity
(tons)
Model
No.
Beam
Height
(in)
I-Beam
Width
(in)
Min Radius
Curve
(in)
Wheel
Tread Dia
(in)
Net
Weight
(lbs)
1/4
1/2
1
1-1/2
2
3
5
CBTP-0025
CBTP-0050
CBTP(G)-0100
CBTP(G)-0150
CBTP(G)-0200
CBTP(G)-0300
CBTP(G)-0500
4 - 24
4 - 24
5 - 24
6 - 24
6 - 24
8 - 24
10 - 24
2.0 - 8.7
2.0 - 8.7
2.3 - 8.7
2.3 - 8.7
2.3 - 8.7
3.0 - 8.7
3.5 - 8.7
27
27
36
45
45
55
70
2.36
2.36
2.36
3.15
3.15
4.41
4.92
19
19
26
46
46
86
130
CM 84A Trolley
CM Series 84A Plain or Geared Trolley - Manufactured for heavy duty,
industrial grade applications. CM Series 84A trolleys feature fully sealed,
precision bearings, heavy duty side frames and fully machined wheel tread
for superior performance and long life — with minimal maintenance.
Flange
Width
(in)
Min
Radius
Curve
(in)
Approx
Net Weight
Plain
Less Chain
(lbs)
Approx
Net Weight
Geared
Less Chain
(lbs)
4 - 12
2.66 - 5.00
20
23
38
4 - 12
2.66 - 5.00
20
23
38
1
5 - 12
3.00 - 6.00
24
43
62
1642-0150
1-1/2
5 - 12
3.00 - 6.00
24
45
65
1641-0200
1642-0200
2
6 - 18
3.33 - 6.25
30
67
90
1641-0300
1642-0300
3
6 - 18
3.33 - 6.25
30
70
93
1641-0400
1642-0400
4
8 - 24
4.00 - 7.00
36
155
184
1641-0500
1642-0500
5
8 - 24
4.00 - 7.00
36
160
188
1641-0600
1642-0600
6
8 - 24
4.00 - 7.00
36
160
188
1641-0800
1642-0800
8
10 - 24 4.62 - 8.00
60
300
347
1641-1000
1642-1000
10
10 - 24 4.62 - 8.00
60
310
360
1641-1200
1642-1200
12
10 - 24 4.62 - 8.00
60
310
360
1631-1600
1632-1600
16
18 - 24 6.00 - 8.00
96
800
895
1631-2000
1632-2000
20
18 - 24 6.00 - 8.00
96
845
955
1631-2500
1632-2500
25
18 - 24 6.00 - 8.00
120
1045
1200
Rated Beam
Capacity Height
(tons)
(in)
Product
Code
Geared
1641-0025
1642-0025
1/4
1641-0050
1642-0050
1/2
1641-0100
1642-0100
1641-0150
• Rugged - Designed to provide superior
performance & long, efficient service.
• Low Rolling Effort - Geared models
have standard 6-foot hand chain drop.
Other hand chain drops available.
• Universal Hanging Clevis - Accepts
most hook mounted hoists.
• Adjustable - Trolley easily adjusts to
fit any beam flange within range of
adjustment, up to an 8.7" flange width.
• Wrap-Around Side Plates - Lugs provide
additional security to increase operator
safety and act as bumpers to protect wheels.
• Dual Tread Wheels - Will fit either tapered or
flat beam flange within range of adjustment.
Wheels include permanently lubricated,
shielded ball bearings for long life
and low maintenance.
• Lifetime Warranty.
• Available in capacities from 1/4 through 25 ton
with 30 through 50 ton trolleys available as tandem
construction.
• Lifetime lubricated, precision ball bearings on trolleys
through 3 ton capacity. Trolleys with capacities 4 tons
and greater are equipped with eight sealed, Timken
tapered roller bearings and grease fittings.
• Heavy rolled steel side frames extend beyond the wheels
to provide these trolleys with superior strength, rigidity and
added protection for the trackwheels. Units with capacities
from1/4 through 12 tons employ universal wheel treads for
use on flat or tapered beam flanges. Units with capacities
from 16 through 25 tons operate on American Standard
I-beams with tapered flanges. For patented track, consult
factory.
• Trolley wheels are fully machined from alloy cast iron
and hardened for high strength and long life.
• Alloy steel axles and equalizer pins are heat treated for maximum
strength and wear life.
• Geared versions have fully machined trackwheel gears and incorporate a
swinging chain guide which keeps the hand chain aligned and free from
jamming.
• Available to fit a broad range of wider flange beams and patented track
applications not listed - contact factory.
• Made in the USA.
• Spark resistant models available — add suffix “SR.”
CM Series 632 Close Radius Trolley
With revolutionary advances, this shorter, more
compact trolley is 50% lighter than competitive
trolleys, yet every bit as tough.
• Negotiates radius curves as tight
as 7 to 10 inches
• Made of highest quality rolled steel
• Unique double row, ball bearing wheel
design for greater wear capacity
• Larger V-bars available for wider flange
adjustment
• For low headroom applications
• Bearings prepacked with lifetime lubricant
• Trolleys available for larger beams, rails,
or tracks; contact your Sales Rep.
• Cast iron trolley guards available
(except for 3 ton)
• Lifetime warranty
• Exclusive Dial-Fit collar quickly adapts trolley
to wide range of beams and patented rails
• Dust covers shield and protect bearings
Rated
Cap.*
(tons)
1/4 – 1/2
1
1-1/2 – 2
3
Adj. for Std. S-beams
Product Depth
Flange
code of beam
Width
(in)
(in)
3222
3224
3226
3230
4-12
4-12
6-15
8-18
2-5/8 – 5-1/16
2 5/8 – 5 1/16
3 3/8 – 5 5/8
4 – 6-1/4
Tread
Dia.
(in)
Net
Wt.
(lbs)
Ship
Wt.
(lbs)
Min.
radius
curve
(in)
2-3/4
2-3/4
3-1/2
3-1/2
9
10
23
29
10
12
25
33
7
7
10
10
Made in U.S.A.
10
All capacities can be supplied for S-beams larger than listed and also for wide
flange beams, rails, or tracks w/approx. equivalent flange widths.
10- 10
Hoists
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Manual Trolleys
CM Series 633 Wide Range Trolley
Simple, rugged, built for trouble-free service, and
ease of operation across a wide range of beam
applications. Series 633 features:
• Rugged steel side plates formed to include
bumpers and trolley guards for added security
• Frames connected by steel equalizer pin,
secured by two nuts on each side
• Universal tread flanged trackwheels equipped
with shielded ball bearings
• Easy rolling on American standard shapes, wide
flange shapes, or patented rail
• Hardened wheels and axles for added strength
and durability
• Spacer washers can be shifted inside or outside
for easy adjustment to wide range of beams
• To be used with hook suspended hoist
• Suspension plate for easy attachment is std.
• Bearings prepacked with lifetime lubricant
Rated
Cap.*
(tons)
1/2
1
2
3
5
Adj. for Std. S-beams
Product Depth
Flange
Tread
Code of Beam
Width
Dia.
(in)
(in)
(in)
3302
3-15 2-1/2 – 5-5/8 2-9/32
3304
5-24
3–8
3-15/32
3306
6-24
3-5/8 – 8
3-15/16
3307
8-24
4–8
5-1/8
3309
10-24
4-5/8 – 8
6-1/8
• One-year warranty
• Imported
Net Ship
Wt. Wt.
(lbs) (lbs)
15
17
34
36
50
53
95
100
172 175
Harrington RH-Advantage Wire Rope Trolley Hoists
Harrington’s Wire Rope Hoists Have Space Saving Design and
Exceptional Quality. Harrington’s RH-Advantage electric wire rope trolley
hoists are built with an ultra-low headroom configuration which provides the
lowest headroom possible by positioning the trolley and hoist parallel with
the beam. Product line includes a standardized selection of commonly
used trolley hoists designed for heavy-duty applications.
Selection
• Stocked in 5, 7-1/2 and 10 Ton capacities
• Ultra-Low headroom configuration.
• Standard 23 foot or 33 foot lift.
• Voltage 460V-3-60 or 230V-3-60.
Dependability
• Revolutionary conical rotor brake virtually eliminates brake maintenance
issues.
• IP55-rated and suitable for harsh environments.
• Spring-tensioned, next generation rope guide secures rope to drum.
• Hoist and trolley feature heavy-duty fan cooled motors.
• Premium hoist rope provides resistance to fatigue and wear.
Ease of use
• Low headroom configuration.
• Requires very little maintenance.
• Easy access design simplifies inspection of rope, drum, and related
components.
• Installation on beam requires no special tools and does not utilize
threaded rods common on other brands.
Cap
(tons)
Product Code
5
5
7-1/2
7-1/2
10
10
RH05U23D4G-1-WA
RH05U33D4G-1-WA
RH08U23D4G-1-WA
RH08U33D4G-1-WA
RH10U23D4G-1-WA
RH10U33D4G-1-WA
Hoists
10
10-11
WWW.HANESSUPPLY.COM
Dual Speed Lifting Motor
Lifting
3 Phase 60Hz
Speed Reeving Rope
Net
Lift (ft/min)
Rated Current Weight
(part/ (mm(ft)
(amps)
reeving) spec) Output
(lbs)
(Hp)
Dual
@460V @230V
Speed
23
33
23
33
23
33
16/5
16/5
16/5
16/5
16/5
16/5
4/1
4/1
4/1
4/1
4/1
4/1
9
9
9
9
13
13
8.0/2.7 11.5/9.6
8.0/2.7 11.5/9.6
8.0/2.7 11.5/9.6
8.0/2.7 11.5/9.6
16.1/5.4 23.0/17.3
16.1/5.4 23.0/17.3
23.0/19.0
23.0/19.0
23.0/19.0
23.0/19.0
46.0/34.5
46.0/34.5
991
1101
991
1101
2429
2671
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Electric Chain Hoists
CM Lodestar Electric Chain Hoist
The balanced, integrated, proven design of the CM Lodestar has made it
the most popular electric chain hoist in the industry. Lodestar gives you
more value for your money including:
• Up to 3 ton capacities for heavy-duty industrial applications
• Gear train lifetime lubricated with non-oxidizing grease
• Precision machined and hardened liftwheel with hardened chain guides
for precise chain liftwheel fit
• Gearing designed for exceptionally long life and quiet operation.
• H4 duty standard
• Rugged control station (NEMA 4x)
• Hoist duty motor, standard Protector overload device
and standard screw type limit switches.
Specifications–Single Speed
Product code †
Rated Std.
Lift
Approx.
less suspension
Cap.* lift speed Motor
shipping
(tons) (ft.) (F.P.M.) H.P. Model Reeving 115-1-60 230/460-3-60 wt.(lbs.)
1/8
1/8
1/8
1/8
1/8
1/8
1/4
1/4
1/4
1/4
1/4
1/4
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
10
10
15
15
20
20
10
10
15
15
20
20
10
10
10
10
15
15
15
15
20
20
20
20
10
10
10
15
15
15
20
20
20
10
10
15
15
20
20
10
10
15
15
20
20
32
60
32
60
32
60
16
32
16
32
16
32
8
16
32
64
8
16
32
64
8
16
32
64
8
16
32
8
16
32
8
16
32
8
16
8
16
8
16
5.5
11
5.5
11
5.5
11
1/4
1/2
1/4
1/2
1/4
1/2
1/4
1/2
1/4
1/2
1/4
1/2
1/4
1/2
1
2
1/4
1/2
1
2
1/4
1/2
1
2
1/2
1
2
1/2
1
2
1/2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
A
AA
A
AA
A
AA
B
C
B
C
B
C
E
F
J
JJ
E
F
J
JJ
E
F
J
JJ
H
L
LL
H
L
LL
H
L
LL
R
RR
R
RR
R
RR
RT
RRT
RT
RRT
RT
RRT
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
1
1
1
2
1
1
1
2
1
1
2
1
1
2
1
1
2
2
2
2
2
2
3
3
3
3
3
3
2702
2712
3101
3111
3102
3112
2722
2732
3121
3131
3122
3132
2742
2752
3512
—
3141
3151
4212
—
3142
3152
4213
—
2762
3522
—
3161
4222
—
3162
4223
—
3532
—
4232
—
4233
—
9501
—
9502
—
9503
—
2705
2715
3103
3113
3104
3114
2725
2735
3123
3133
3124
3134
2745
2755
3515
3545
3143
3153
4214
4244
3144
3154
4215
4245
2765
3525
3555
3163
4224
4254
3164
4225
4255
3535
3565
4234
4264
4235
4265
9505
9508
9506
9509
9507
9510
† Single speed hoist factory wired 460V, convertible to 230V.
* DO NOT exceed working load limit, load rating, or capacity.
60
66
64
70
68
74
60
66
64
70
68
74
69
66
110
117
76
70
116
123
83
74
121
128
75
110
117
82
116
123
89
121
128
130
137
140
147
150
157
155
162
169
176
183
190
• Hardened, forged steel, latch type hooks, and Hoistaloy
load chain for long, dependable service
• Easy to install and maintain
• No special tools required to disassemble
• Lifetime warranty
• Each hoist thoroughly inspected and tested to over 125%
of rated load prior to shipment
• Meets ASME B30.16
• Made in U.S.A.
Special applications
• Harsh environment hoists available for severe duty of plating,
galvanizing, and washdown applications
• Hoists with climbing capability available for temporary rigging or lifting
applications–must be used in inverted position only
• Hoists with creep control allow precise positioning through field
adjustment within the time delay range of .05 sec. to 3 sec.
• Articulating suspension 3 ton only
Double
Reeved
Single
Reeved
Triple
Reeved
Approx.
Shipping
Rated Standard Lift Speed Motor
Capacity Lift (ft) (F.P.M.) H.P. Model Reeving 230-3-60 460-3-60 Weight (lbs)
1/8
1/8
1/4
1/4
1/2
1/2
1/2
1/2
1
1
1
2
2
3
3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10/32
20/60
5/16
10/32
2.5/8
5/16
10/32
21/64
2.5/8
5/16
10/32
2.5/8
5/16
1.75/5.5
3.5/11
1/4
1/2
1/4
1/2
1/4
1/2
1
2
1/2
1
2
1
2
1
2
A2
AA2
B2
C2
E2
F2
J2
JJ2
H2
L2
LL2
R2
RR2
RT2
RRT2
1
1
1
1
2
1
1
1
2
1
1
2
2
3
3
2707
2717
2727
2737
2747
2757
3502
3549
2767
3504
3553
3506
3561
9511
9512
2708
2718
2728
2738
2748
2458
3503
3550
2768
3505
3554
3507
3562
9513
9514
70
74
70
74
79
74
116
130
83
116
130
136
150
161
175
† Specify voltage 230 or 460
10
10- 12
Hoists
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Electric Chain Hoists
CM Lodestar with Hook Suspension
Type
Swivel hook
Swivel hook
Swivel hook
Swivel hook
Swivel hook
Swivel latchlok hook
Swivel latchlok hook
Swivel latchlok hook
Rigid lug for low head trolley
Rigid lug for low head trolley
Rigid lug for low head trolley
Rigid lug for low head trolley
Rigid lug for low head trolley
Rigid hook
Rigid hook
Rigid hook
Rigid hook
Rigid hook
Rigid latchlok hook
Product Code
2792
2793
3661
3660
9557
2796
3662
3663
2778
2779
3677
3668
9561
2788
2789
3651
3658
9559
2790
Models
A-AA-B-C-F
E-H
J-L-JJ-LL
R-RR
RT-RRT
A-AA-B-C-F
J-L-JJ-LL
R-RR
A-AA-B-C-F
E-H
J-L-JJ-LL
R-RR
RT-RRT
A-AA-B-C-F
E-H
J-L-JJ-LL
R-RR
RT-RRT
A-AA-B-C-F
CM Lodestar with Series 635
Low Headroom Trolley
Rated
Cap.*
(tons)
1/8 to 1
2
3
Std. Range of Adjust.
Am. Std. S-beams
Flange
Product
Depth
Width
Code
Models
(in)
(in)
3575
A–L
4 – 15 2-5/8 – 5-5/8
3569
R – RR 6 – 18 3-3/8 – 6
9576 RT – RRT 8 – 15
4 – 5-5/8
Min. Approx.
Tread Radius Ship
Dia. Curve Wt.
(in)
(in)
(lbs)
3-1/8
24
22
4-3/4
24
52
4-3/4
30
58
Note: Rigid lug suspension required for attaching to hoist. Apply for other
than standard beam adjustment. Beam end stop omitted for picture clarity.
Note: 3 ton lug
suspension prevents
hoist from rotating
but allows hoist to
articulate below trolley.
CM Lodestar with Series 635 Motor Driven Trolley
Std.
Std. Range of Adj.
Min. Approx.
For use
Travel
Am. Std. S-beams
Radius Ship
Rated
Cap.* Product with
Power Speed Motor Depth
Flange
Curve
Wt.
(in)
(in)
(in)
(lbs)
(tons) Code Model Supply (F.P.M.) H.P.
1/8 – 2 3670
A-RR 115-1-60
75
1/4 6 – 15 3-3/8 – 5-5/8
30
118
1/8 – 2 3671
A-RR 230-3-60
75
1/4 6 – 15 3-3/8 – 5-5/8
30
118
1/8 – 2 3672
A-RR 460-3-60
75
1/4 6 – 15 3-3/8 – 5-5/8
30
118
3
9577 RT-RRT 115-1-60
75
1/4 8 – 15
4 – 5-5/8
30
120
3
9578 RT-RRT 230-3-60
75
1/4 8 – 15
4 – 5-5/8
30
120
3
9579 RT-RRT 460-3-60
75
1/4 8 – 15
4 – 5-5/8
30
120
1/8 – 2 9315
A-RR 115-1-60
30
1/4 6 – 15 3-3/8 – 5-5/8
30
113
1/8 – 2 9316
A-RR 230-3-60
30
1/4 6 – 15 3-3/8 – 5-5/8
30
113
1/8 – 2 9317
A-RR 460-3-60
30
1/ 4 6 – 15 3-3/8 – 5-5/8
30
113
3
9318 RT-RRT 115-1-60
30
1/4 8 – 15
4 – 5-5/8
30
120
3
9319 RT-RRT 230-3-60
30
1/4 8 – 15
4 – 5-5/8
30
120
3
9320 RT-RRT 460-3-60
30
1/4 8 – 15
4 – 5-5/8
30
120
Can be modified to fit larger beams. - Flat tread wheel available. - Beam size and voltage
required for ordering. - Apply for other than standard travel speeds.
CM Lodestar XL Electric Chain Hoists
The CM Lodestar XL gives you the same lifting reliability as our popular
original Lodestar, but with faster speeds, less reeving, and higher
capacities. Operators in automotive, heavy manufacturing, paper mills and
other industries will come to rely on the Lodestar XL under any conditions.
Heavy-duty motor and gearing assure you’ll get reliable load lifting, day
after day, especially when the going gets tough. It’s the Lodestar tradition.
230/460-3-60
Plain Geared
Speed
Capacity
Hook
Reeving
Trolley Trolley
(fpm)
(tons)
Hoists
10
2
2
2
3
3
3
4
4
4
5
5
5
5
5
6
6
6
7.5
10-13
1
1
1
2
2
2
2
2
2
3
3
2
2
2
3
3
3
23
18
24
30
9
12
15
9
12
15
6
8
9
12
15
6
8
10
6
5201H
5204H
5265H
5209H
5212H
5267H
5215H
5218H
5269H
5221H
5224H
5279H
5283H
5285H
5227H
5230H
5287H
5201P
5204P
5265P
5209P
5212P
5267P
5215P
5218P
5269P
5221P
5224P
5279P
5283P
5285P
5227P
5230P
5287P
5289P
5201G
5204G
5265G
5209G
5212G
5267G
5215G
5218G
5269G
5221G
5224G
5279G
5283G
5285G
5227G
5230G
5287G
5289G
575-3-60
Motor
Driven
Trolley
5201M
5204M
5265M
5209M
5212M
5267M
5215M
5218M
5269M
5221M
5224M
5279M
5283M
5285M
5227M
5230M
5287M
5289M
Hook
5231H
5232H
5266H
5233H
5234H
5268H
5235H
5236H
5278H
5237H
5238H
5280H
5284H
5286H
5239H
5240H
5288H
Plain Geared
Trolley Trolley
5231P
5232P
5266P
5233P
5234P
5268P
5235P
5236P
5278P
5237P
5238P
5280P
5284P
5286P
5239P
5240P
5288P
5290P
5231G
5232G
5266G
5233G
5234G
5268G
5235G
5236G
5278G
5237G
5238G
5280G
5284G
5286G
5239G
5240G
5288G
5290G
Motor
Driven
Trolley
5231M
5232M
5266M
5233M
5234M
5268M
5235M
5236M
5278M
5237M
5238M
5280M
5284M
5286M
5239M
5240M
5288M
5290M
Product
Type
Code
2992
Rigid lug for motor driven trolley
Rigid lug for motor driven trolley
2993
3679
Rigid lug for motor driven trolley
Rigid lug for motor driven trolley
3668
Rigid lug for motor driven trolley
9561
Models
A-AA-B-C-F
E-H
J-L-JJ-LL
R-RR
RT-RRT
Note: Beam end stop omitted for picture clarity.
* WARNING!
Overloading and improper use can result in injury.
To avoid injury:
• Do not exceed working load limit, load
rating, or capacity.
• Do not use to lift people or loads over people
• Use only alloy chain and attachments for overhead lifting.
• Read and follow all instructions.
The Lodestar XL electric
chain hoist features:
• 2 to 7-1/2 ton capacities for heavy-duty
industrial applications
• Forged 10 pocket oblique lay liftwheel for
smooth chain operation, constant chain
speed, and reduced chain wear
• Gearing operates in oil bath. Designed for
exceptionally long life and quiet operation
• Heavy-duty multiple disc braking system
• Hardened forged steel latch type hooks
• Hoistaloy load chain for long, dependable
service
• Thermally protected hoist duty motor
• Standard Protector overload device
• Standard screw type limit switches
• Easy installation and maintenance
• Provides high reliability
and long life
• Rated H-4, heavy duty
• Factory tested
at 125% of rated
capacity prior
to shipment
• Lifetime warranty
• Made in U.S.A.
3 & 4 ton
double
reeved at
9 or 12
F.P.M.
WWW.HANESSUPPLY.COM
2 ton single reeved
at 18 or 24 F.P.M.
5 & 6 ton
triple
reeved at
6 or 8
F.P.M.
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Electric Chain Hoists
CM Prostar Electric Chain Hoist
CM Lodestar Electric Chain Hoists
with Long Lift
• Designed and built to take the rigors of the touring industry
• Black powder coat finish for durability
• 115 VAC control circuit
• Heat treated formed steel chain guides
• Easy to handle, operate, and maintain
• Designed for operation in the inverted position
• H4 duty rated at 30 minutes/300 starts/hour
• Operates with voltage drops up to 10% below
name plate rating
• Capacities of up to 3 tons
• Adjustable screw limits provide added reliability
• Standard overload protection offers increased safety
• Minimum 5:1 design ratio
• Zinc plated load chain protects against corrosion
• Grease lubrication in gear case eliminates oil drips on stage
• Hoist motor is completely enclosed in durable protective cast aluminum
housing
• Interfaces with all existing controllers and power distros
• Fits in standard road case
• Lifetime warranty
• Each hoist thoroughly inspected and tested to
over 125% of rated load prior to shipment
• Meets ASME B30.16, HMI (Hoist Manufacturing Institutte), NEC and OSHA standards and
regulations
• Made in U.S.A.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Lightweight, quiet, and portable, the CM Prostar is designed and built
for the unique rigging needs encountered at small venues.
Featuring an overload device that protects the hoist,
operator, and structure from damaging overloads.
Key Features — DC electro-mechanical double brakes,
non-adjusting for low maintenance and quiet operation.
Gearing — Precision machined gears heat treated
for strength and durability.
Chain Guide — One piece jam free for smooth
operation.
Housing — Lightweight, cast aluminum, durable
and strong black powder coated finish for low visibility.
Lift Wheel — CM patented 10 pocket oblique lift wheel
for quiet and smooth operation.
Low Voltage Control — 110 volt for long cable runs without
voltage drop 24 and 48 volt optional.
Duty Cycle — H-4 duty rated, designed for heavy duty application.
Standard Features — Overload protection, helps prevent lifting
of dangerous overloads.
Chain Stop — Mounted on load chain prevents over-travel.
Metric Rated Load Chain — Designed and manufactured by Columbus
Mckinnon. Zinc plated to protect against corrosion. Black phosphate
finish optional.
The industry’s best lifetime warranty.
Meets or exceeds world standards.
Optional features — Chain bag, easy-to-mount cloth type bags.
Double brake.
Encoder.
Capacity
Clearance Dimensions (in)
A
B
C
D
F
H
I
J
M
P
Lodestar model
A, AA, B, C & F J, JJ, L & LL
R & FIR
16-1/4
18-9/16
24-1/8
6-1/8
7-5/8
7-5/8
11/16
7/8
1-1/8
11
9-1/2
9-1/2
7-3/4
10-11/16
10-11/16
1
1-3/16
1-1/2
4-13/16
7-1/4
6-3/16
3-15/16
5-7/16
6-1/2
1
1-1/8
1-5/16
6-5/8
7-13/16
7-13/16
300
300
500
500
600
600
1000
Models
Hoist Specs - Black Finish Hoist Alloy w/ 60 ft.** Lift
Suspensions must be ordered separately.
Rated
Lifting
Product code
Cap.*
Speed Lift
Less
(tons) Model (fpm) (ft.) Suspension H.P
1/4
1/4
1/4
1/4
1/2
1/2
1/2
1/2
1
1
2
2
2
B
B
C
C
F
F
J
J
L
L
R
R
RR
16
16
32
32
16
16
32
32
16
16
8
8
16
60
60
60
60
60
60
60
60
60
60
60
60
60
3140
3169
3200
3201
2867S
2868S
3394
3482
3609S
3610S
4238
4239
4272
1/4
1/4
1/2
1/2
1/2
1/2
1
1
1
1
1
1
2
Operating
voltage
Full
Load
Amps
HMI
FEM
ISO
115-1-60
230/460-3-60
115-1-60
230/460-3-60
115-1-60
230/460-3-60
115-1-60
230/460-3-60
115-1-60
230/460-3-60
115-1-60
230/460-3-60
230/460-3-60
5.2
1.8/1.1
8.0
1.7/1.2
8.0
1.7/1.2
17
3.8/2.3
17
3.8/2.3
17
3.8/2.3
11.3/6
H-4
H-5
H-4
H-5
H-4
H-5
H-4
H-4
H-4
H-4
H-4
H-4
H-4
L4 - 1AM
L4 - 1AM
L4 - 1AM
L4 - 1AM
L4 - 1AM
L4 - 1AM
L4 - 1AM
L4 - 1AM
L4 - 1AM
L4 - 1AM
L4 - 1AM
L4 - 1AM
L3 - 1BM
M-4
M-4
M-4
M-4
M-4
M-4
M-4
M-4
M-4
M-4
M-4
M-4
M-3
Work rating
300
300
300
500
500
500
600
600
1000
1000
1000
Number Motor
of Chains (HP)
1
1
1
1
2
2
2
Lift Speed
(FPM)
16
24
40
12
16
20
8
12
6
8
12
1/6
1/6
1/6
1/6
1/6
1/6
1/6
Lift
Wt. Less Weight 1 ft
Speed Less Chain of Chain
(FPM)
(lbs)
(lbs)
16
16
16
12
8
8
8
28
28
28
28
36
36
36
0.35
0.35
0.35
0.35
0.7
0.7
0.7
Full Load Amps
1-Phase 3-Phase
3.6
4
3.6
3.6
.6*/1.2ˇ
.6*/1.1ˇ
.7/1.2ˇ
.6*/1.1ˇ
.6*/1.1ˇ
.7*/1.2
Operating Voltage
Single Phase
Three Phase
115-1-50/60
200-1-50/60 220-3-50/60 415-3-50/60
220-3-50/60 415-3-50/60
220-3-50/60 415-3-50/60
115-1-50/60
200-1-50/60
220-3-50/60 415-3-50/60
220-3-50/60 415-3-50/60
115-1-50/60
200-1-50/60
220-3-50/60 415-3-50/60
115-1-50/60
200-1-50/60
220-3-50/60 415-3-50/60
220-3-50/60 415-3-50/60
Note: All theatrical hoists are shipped with 2-1/2 ft. power and control cords less control
station unless otherwise specified. For other lifts, speeds, and capacities, please call.
**For lifts other than 60 ft., contact your nearest CM theatrical distributor.
CM Lodestar Hook Suspensions with Black Finish
10
Note: For other hook suspensions or special configurations, please call.
WWW.HANESSUPPLY.COM
10- 14
Hoists
Model
AA - F
J - LL
R & RR
Conventional Conventional Latchlok Latchlok
Rigid
Swivel
Rigid
Swivel
Hook
Hook
Hook
Hook
2998
2999
2998E
2999E
3631
3624
3631E
3624E
3634
3600
3634E
3600E
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Electric Chain Hoists
Model
No.
UJL-1016-1
UJL-1016-3
UJL-1032-1
Rated No.
Load
of
(lbs) Chains
1000
1
1000
1
1000
1
Ship. Wt. Net Wt.
Max Lifting
Motor Voltage/Pahse/Hertz**
Unit Less Unit Less
Lift Speed Motor
Chain
Chain
(ft) (FPM) H.P.
Amps
Amps (lbs)
(lbs)
120 16
1/2 115/1/60 7.6 230/1/60 3.8
73
68
120 16
1/2 230/3/60 1.9 460/3/60 .95
68
63
120 32
1
115/1/60 14.0 230/1/60 7.0
86
81
UJL-1032-3
UJL-2016-1
UJL-2016-3
UJL-4008-1
UJL-4008-3
1000
2000
2000
4000
4000
120
120
120
60
60
Coffing Model UJL
Coffing UJL Models are designed to meet your toughest rigging
applications. Whether flying truss for lighting and sound or moving sets
and backdrops, the UJL is your rigging solution. Compact and quiet,
the UJL features multiple disc motor brake, mechanical overload clutch,
and chain end stop for safety.
• Crowd Pleaser - Rated loads from 1/2 to 2 ton, lifts to 120 feet,
and speeds of 8, 16, and 32 FPM.
• Road Warrior - Rugged aluminum housing withstands setup and tear
down show after show.
• Powerful - Dual voltage, industrial duty motors for long service.
115-volt control standard, 24 VC optional.
• Quiet - Five-pocket load sheave for smooth, quiet operation
and reduced chain wear.
• Cool - Oil bath transmission runs cooler, lasts longer.
• Versatile Performer - Spring-loaded contractor allows for inverted
or upright lifting.
• “No Worries, Mon” - Hoist motor, electrical panel,
and chaining parts are easily
accessible for maintenance and repair
without disassembly of transmission.
• Tough Act to Follow - Lifetime warranty against
defective workmanship and materials.
• Local Gig - Made in USA.
1
1
1
2
2
32
16
16
8
8
1
1
1
1
1
230/3/60 3.0 460/3/60
115/1/60 14.0 230/1/60
230/3/60 3.0 460/3/60
115/1/60 14.0 230/1/60
230/3/60 3.0 460/3/60
1.5
7.0
1.5
7.0
1.5
75
86
75
96
85
70
81
70
91
80
*All units are less chain and less control pendant. Specify lift, number pigtails,
and control pendant, if required.
**All motors are dual voltage. 3-phase and 1-phase motors will operate on
50-hertz power, but will only run 5/6 nominal speed. Optional 3-phase
voltages - 208, 380, 415, 575. 60 hertz standard. 50 hertz available.
UJL Dimensional Specifications
Hoist Dimensions
Model
No.
UJL-1016
UJL-1032
UJL-2016
UJL-4008
Rated
A
A
Load 1-PH 3-PH
(lbs)
(in)
(in)
1000
9
8-1/4
1000 10-1/2 8-5/8
2000 10-1/2 8-5/8
4000 10-1/2 8-5/8
Chain Container Dimensions
E
Ship. Net
Model
Dia. F
Wt.
Wt.
No.
(in) (in) (lbs) (lbs)
14 2-1/2
1
UJL-927-1 9
UJL-927-2 12 15
3
1-1/2
Chain Container Cap. (ft)
UJL-1016 & 1032
UJL-2016
UJL-4008
1/4" Single Chain 9/32" Single Chain 9/32" Double Chain
90
120
70
120
35
60
• Two sizes - Available for lifts up to 120 feet.
• Construction - Bag made from heavy-duty #6 canvas, with molded polyurethane bottom,
and swivel snap for attachment.
• Compact Design - Black finish, lightweight, and collapsible for easy storage.
• Suspension - Mounts easily and quickly to eyebolt for take-up of slack chain.
• Made in USA.
CM Valustar Electric Chain Hoists
CM Valustar is designed specifically for general commercial applications.
Product code
Hoist
Max
Lifting
Model Capacity
115-1-60 230/460-3-60
(tons) Speed FPM
2401
2403
2405
2407
2409
2401B
2403B
2405B
2407B
2409B
2401C
2403C
2405C
2407C
2402
2404
2406
2408
2410
2402B
2404B
2406B
2408B
2410B
2402C
2404C
2406C
2408C
WB
WF
WH
WL
WR
WB
WF
WH
WL
WR
WB
WF
WH
WL
1/4
1/2
1
1
2
1/4
1/2
1
1
2
1/4
1/2
1
1
16
16
8
16
8
16
16
8
16
8
16
16
8
16
Approximate Shipping wt. (lbs)
115-1-60
230/460-3-60
54
60
70
105
130
64
64
77
111
136
68
68
84
116
58
58
68
106
122
62
62
75
112
128
66
66
82
117
This compact, lightweight hoist features:
• Fully machined and heat treated liftwheel with
hardened chain guides for smooth chain operation
and reduced chain wear
• Heavy-duty caliper type AC brake
• Rugged NEMA 4 control station, 115 volt control circuit
• Easy to install and maintain
• CM Hoistaloy load chain for smooth operation
and maximum chain life
• Efficient regenerative braking system to avoid heat
generation in power train.
• Enclosed hoist duty motor
• Gear train lifetime lubricated with non-oxidizing grease
• Latch type hooks
• Hook suspension standard
• Fully machined and heat treated gear train
• Standard overload Protector device
• H3 duty-1 phase; H-4 duty-3 phase
• One-year warranty
• Made in U.S.A.
CM Powerstar® High Capacity Electric Chain Hoists
Hoists
10
Faster speeds than ever before in chain hoists this size including the first
single-chain electric hoist ever in a 3 ton capacity.
CM Powerstar Electric Chain Hoists are designed for high duty cycle
applications. The hoist uses efficient regenerative braking, avoiding heat
generation in the power train inherent in wire rope hoists which utilize power
robbing, mechanical braking systems.
STANDARD/CLOSE HEADROOM MODELS
With a helical gearing system that
Cap. (Tons) Hoist Speeds (Ft/Min)
assures smooth, quiet operation, the
2
20, 24, 32, 40, 48
Powerstar lifts more safely and
3
20, 24, 32, 40
efficiently than comparable wire rope
4
10, 12, 16, 20, 24
hoists. CM's hardened alloy steel
5
10, 12, 16, 20, 24
6
10, 12, 16, 20
Hoistaloy® load chain provides high
7-1/2
7, 8, 11, 14, 16
strength and long service life. Chain has
9
7, 8, 11, 13
more flexibility – will not twist, kink, or
10
7, 8, 11, 13
jam when properly used and maintained.
12
5, 6, 8, 10
It has a much longer life than wire rope,
15
4, 5, 6, 8
is easier to inspect, easier to replace,
and assures true vertical lift. Longer lifts are available without an increase
in hoist frame size or a substantial increase in cost.
10-15
Standard safety equipment includes: Protector® to prevent lifting of excessive overloads; Latchlok® hook for more secure load attachment; triple disc,
DC rectified brake, and adjustable screw type limit switches. Lightweight,
streamlined design. All capacities can be equipped with plain, geared, or
motor driven trolleys.
These are basic
single speed
catalog units.
For other capacities, speeds,
lifts & complete
dimensional information,
please contact
your sales rep.
WWW.HANESSUPPLY.COM
Single
reeved
Double
reeved
Triple
reeved
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Electric Chain Hoists
EC Hook & Lug Suspension Models Electric Chain Hoists - Strength & Dependability
Coffing EC Models - High performance hoists engineered for heavy duty
industrial service. Designed for safety, the EC incorporates mechanical
load brake, motor brake, and overload clutch as standard.
• Capacities & Lifts - Rated loads from 1/4 to 5 Tons, with 10, 15, and
20-foot standard lifts. Other lifts available. Standard push button drop
is 4-feet less than lift.
• Voltage & Motor Options - 115/230, 208 - single phase; 230/460, 208,
220/380, 575 - three phase; 60 hertz standard, 50 hertz available.
Two-speed motors available (3 to 1 speed ratio.)
Capacity
(lbs) (Ton)
500
1/4
1/4
500
500
1/4
1,000
1/2
1,000
1/2
1,000
1/2
1
2,000
2,000
1
1
2,000
1
2,000
2,000
1
1
2,000
4,000
2
4,000
2
4,000
2
4,000
2
3
6,000
6,000
3
3
6,000
8,000
4
8,000
4
10,000
5
10,000
5
Model Frame* No. of Motor Lift Speed (FPM)
No.
Size Chains HP
Single
Two
EC-0516
S
1
1/4
16
5.3
EC-0532
S
1
1/2
32
10.7
EC-0564
S
1
1
64
21.3
EC-1009
S
1
1/4
9
3
EC-1016
S
1
1/2
16
5.3
EC-1032
S
1
1
32
10.7
EC-2004
S
2
1/4
4
1.3
EC-2008
S
2
1/2
8
2.7
EC-2012
S
1
3/4
12
4
EC-2048
L
1
3
48
16
EC-2016
S
1
1
16
5.3
EC-2032
L
1
2
32
10.7
EC-4006
S
2
3/4
6
2
EC-4008
S
2
1
8
2.7
EC-4016
L
1
2
16
5.3
EC-4024
L
1
3
24
8
EC-6005
S
3
1
5
1.7
EC-6010
L
2
2
10
3.3
EC-6016
L
2
3
16
5.3
EC-8008
L
2
2
8
2.7
EC-8012
L
2
3
12
4
EC-10005
L
3
2
5
1.7
EC-10008
L
3
3
8
2.7
Headroom
(in) †
16-7/8
16-7/8
16-7/8
16-7/8
16-7/8
16-7/8
18-1/4
18-1/4
16-7/8
23
16-7/8
23
18-15/16
18-15/16
23
23
23-1/4
27-3/8
27-3/8
27-3/8
27-3/8
27-7/8
27-7/8
• Suspension Options - Rigid or swivel top hook, lug, plain, geared,
and motorized trolley available.
• Small Frame Design - Features housings of cast aluminum alloy
construction for minimum weight. Engineered and designed for use
with motors up to 1 HP.
• Large Frame Design - Features load bearing housings of ductile iron
construction for maximum strength. Non-load bearing housings of cast
aluminum alloy for minimum weight. Engineered and designed for use
with higher torque 2 and 3 HP three phase motors.
CM Shopstar Electric Chain Hoists
Specifications
The CM ShopStar electric chain hoist features rugged
construction and high H4 duty cycle. It keeps lifting and
lifting, up to 1,000 pounds and 300 motor starts per hour.
Additional features and benefits include:
115-1-60
• H4 duty cycle (300 motor starts/hour)
• Easy installation and maintenance
• Standard protector overload device
• 10 pocket oblique lay liftwheel
provides longer chain wear
• Epoxy powder coat finish
• 6-1/2 ft. power cord with molded 3
prong plug on 115 volt units
• NEMA 4 industrial rated control station
• Optional impact-resistant chain
container available
• Gear train lifetime lubricated with
non-oxidizing grease
• CM hoist alloy load chain (zinc plated optional)
• Thermally protected hoist duty motor
• Dual braking system–D.C. plus regenerative
• Rugged cast aluminum alloy hoist frame
• 5:1 design factor
• Small, compact design for commercial applications
• Rigid hook prevents tangling of power cord
• Hardened forged steel latch style lower hook rotates 360°
• Totally enclosed non-ventilated hoist frame protects motor from
environmental contamination
• True vertical lift
• Precision bearings used throughout hoist
• Lifetime warranty
• Made in U.S.A.
!
WARNING
2070
2000
2095
2090
2001
2110
-
• Accessories & Options - Full line
available to meet a variety
of applications.
• Lifetime Warranty.
* S=Small frame hoist, parallel
mounted, single or three phase.
L = Large frame hoist, cross
mounted, three phase only.
**For 10 ft. lift, top hook suspension
and lug suspension units.
† Metric rated options available
NOTE: Call for complete
dimensional information.
1/4 - 5 Ton
Made in USA
Product Code
230-1-60 230-3-60 460-3-60
2069
2047
2094
2089
2048
2109
-
2071
2076
2081
2026
2086
2074
2096
2091
2080
2101
2099
2035
2106
2105
2111
2116
2119
2072
2077
2082
2029
2087
2075
2097
2092
2084
2102
2100
2038
2107
2114
2112
2117
2121
Max.
cap.
Ibs.
Lifting
speed
F.P.M.
Reeving
Lift
ft.
Approx.
shipping
wt. (Ibs.)
Motor
H.P.
250
250
250
250
300
300
300
300
500
500
500
500
500
500
500
600
600
600
600
1000
1000
1000
1000
16
16
24
40
16
16
24
40
8
8
12
12
16
20
24
8
8
12
20
6
6
8
12
single
single
single
single
single
single
single
single
double
double
single
single
single
double
single
double
double
double
double
double
double
double
double
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
26
28
28
28
26
28
28
28
32
34
26
28
28
34
28
32
34
34
34
32
34
32
32
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
1/6
Clearance dimensions (in.)
Reeving
Single
Double
A
11-1/16
11-15/16
B
3
3-9/16
C
2-15/16
2-3/8
D
3-7/8
5-3/4
CM ShopStar Chain Container
Product
code
2063
2064
2065
2066
2067
Single
reeved
Double
reeved
Approx.
Shipping
wt., Ibs.
10
20
40
80
120
5
10
20
40
60
1
1.4
1.4
1.4
2.2
WWW.HANESSUPPLY.COM
10
10- 16
Hoists
Overloading and improper use can result in injury.
To avoid injury:
• Do not exceed working load limit, load rating, or capacity.
• Do not use to lift people or loads over people
• Use only alloy chain and attachments for overhead lifting.
• Read and follow all instructions.
• Durable Construction - Built in compliance
with ASME/ANSI B30.16 and CSA standards.
Housing Dim. (in)
Net Wt.**
H
W
L
(Lbs)
8
11-5/8 23-3/8
100
8
11-5/8 23-3/8
108
8
11-5/8 23-3/8
116
8
11-5/8 23-3/8
104
8
11-5/8 23-3/8
106
8
11-5/8 23-3/8
118
8
11-5/8 23-3/8
116
8
11-5/8 23-3/8
116
8
11-5/8 23-3/8
114
10-7/8 14-13/16 31-3/16
302
8
11-5/8 23-3/8
118
10-7/8 14-13/16 31-3/16
295
8
11-5/8 23-3/8
127
8
11-5/8 23-3/8
133
10-7/8 14-13/16 31-3/16
295
10-7/8 14-13/16 31-3/16
302
8
11-5/8 26-3/8
200
10-7/8 14-13/16 31-3/16
340
10-7/8 14-13/16 31-3/16
347
10-7/8 14-13/16 31-3/16
345
10-7/8 14-13/16 31-3/16
352
10-7/8 14-13/16 31-3/16
393
10-7/8 14-13/16 31-3/16
393
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Electric Chain Hoists
EC Trolley Suspension Electric Chain Hoists - Suspensions for a Variety of Applications
Coffing ECT, ECGT, and ECMT Models - Plain, geared, and motorized
trolley suspensions with all the features of basic EC models for added
flexibility in a variety of applications.
• Plain Trolley - For manual positioning of hoist and load.
• Geared Trolley - For more precise positioning of hoist and load. Standard
hand chain drop is 2-feet less than lift.
• Motorized Trolley - For faster positioning of hoist and load over longer
distances. 35 or 75 FPM speeds standard with optional speeds of 18,
24, 50, 100, and 150 FPM.
• Voltages - 115/230, 208 - single phase; 230/460, 208, 220/380,
575 - three phase, 60 hertz standard, 50 hertz available.
• Two-Speed Motorized Trolley Models - Optional with 3 to 1 speed ration,
three-phase, single voltage only.
Capacity
(Lbs) (Ton)
500
1/4
1/4
500
500
1/4
1,000
1/2
1,000
1/2
1,000
1/2
1
2,000
2,000
1
1
2,000
2,000
1
1
2,000
2,000
1
4,000
2
4,000
2
4,000
2
4,000
2
6,000
3
6,000
3
6,000
3
8,000
4
8,000
4
10,000
5
10,000
5
Model
Frame Trolley ++ ECT & ECGT
ECMT
No.
Size* Mount
Hdrm (in) Hdrm (in)
EC(†)-0516
S
P
17-1/4
17-1/4
EC(†)-0532
S
P
17-1/4
17-1/4
EC(†)-0564
S
P
17-1/4
17-1/4
EC(†)-1009
S
P
17-1/4
17-1/4
EC(†)-1016
S
P
17-1/4
17-1/4
EC(†)-1032
S
P
17-1/4
17-1/4
EC(†)-2004
S
P
18-5/8
18-5/8
EC(†)-2008
S
P
18-5/8
18-5/8
EC(†)-2012
S
P
17-1/4
17-1/4
EC(†)-2016
S
P
17-1/4
17-1/4
EC(†)-2032
L
C
21-9/16
22-1/4
EC(†)-2048
L
C
21-9/16
22-1/4
EC(†)-4006
S
P
19-5/16
19-3/8
EC(†)-4008
S
P
19-5/16
19-3/8
EC(†)-4016
L
C
21-9/16
22-1/4
EC(†)-4024
L
C
21-9/16
22-1/4
EC(†)-6005
S
P
23-1/4
22-25/32
EC(†)-6010
L
C
26
26-5/8
EC(†)-6016
L
C
26
26-5/8
EC(†)-8008
L
C
25-15/16
26-3/4
EC(†)-8012
L
C
25-15/16
26-3/4
EC(†)-10005 L
C
29-3/4
30-5/8
EC(†)-10008 L
C
29-3/4
30-5/8
• Wrap-Around Side Plates - Act as safety lugs and as bumpers to protect
wheels. Available to fit American Standard I-Beams, wide-flange, and
patented track beams. Specify track type and beam size.
• Precision Trolley Wheels - Machined, cast iron wheels with sealed,
lifetime lubricated ball bearings for extended trolley life. Motorized trolley
wheels heat treated for added durability. Bronze and stainless steel
wheels optional.
• Two Trolley Designs - 4-wheel design on 1/4 - 3 ton negotiates 48"
minimum radius curve, including patented track applications. 8-wheel
design on 4 and 5 ton reduces beam flange stress.
• Accessories & Options - Full line available to meet a variety applications.
• Lifetime Warranty.
Flange Min. Rad. Net Wt. ECMT Net
Width (In) Curve (in) (Lbs)** Wt. (lbs)
3.332-6
48
145
180
3.332-6
48
153
188
3.332-6
48
161
196
3.332-6
48
151
186
3.332-6
48
151
186
3.332-6
48
163
198
3.332-6
48
161
196
3.332-6
48
161
196
3.332-6
48
158
194
3.332-6
48
163
198
3.332-6
48
347
375
3.332-7
48
347
375
3.332-6
48
172
207
3.332-6
48
178
213
3.332-6
48
347
375
3.332-6
48
354
362
3.332-6
48
260
320
3.332-6
48
396
424
3.332-6
48
403
431
4-6
***
520
560
4-6
***
527
567
4-6
***
561
599
4-6
***
568
606
1/4 - 5 Ton
Made in USA
† Specify ECT for plain trolley, ECGT for geared trolley, and ECMT for motorized trolley models.
* S = Small frame hoist, single or three phase. L = Large frame hoist, three phase only.
+ P = Parallel mount, standard on small frame hoists. C = Cross mount, standard on large frame hoists.
+
**Weight for 10 ft. lift ECT units. Add 10 lb. for ECGT unit weights.
***4 & 5 ton straight track only. Articulated model for 48" min. radius curved track available – consult factory.
NOTE: Call for complete dimensional data..
ED Extended Duty Hoists - EC Hoists for Special Applications
Coffing ED Models - Extended duty service for special applications which
require a hoist that exceeds the duty rating of basic EC models.
• Capacities & Lifts - Rated loads from 1/4 to 2 Tons, with 10, 15, and
20-foot standard lifts. Other lifts available. Standard push button drop
is 4-feet less than lift.
• Voltage & Motor Options - 230/460, three phase motors standard. Totally
enclosed, fan-cooled motor keeps both motor and transmission from
overheating. Consult factory for other voltage and speed options.
• Suspension Options - Rigid lug; plain, geared, and motorized trolleys.
• Load Chain - Zinc plated standard for
corrosion resistance.
• Duty Cycle - Exceeds H4 duty service.
• External Strain Relief - Secures to
NEMA 3R push button station with
extra strain relief protection.
• Accessories - Full line of options
are available to meet a variety of
applications.
• Lifetime Warranty.
Capacity
Model*
No. of Motor Lift Speed Headroom Housing Dimensions (in) Net Wt.
(Lbs) (Ton)
No.
Chains HP
(FPM)
(in)
H
W
L
(Lbs)
1000
1/2 ED(†)-1032
1
1
32
17-1/4
8-1/4 11-5/8 26-1/4
128
2000
1
ED(†)-2016
1
1
16
17-1/4
8-1/4 11-5/8 26-1/4
130
4000
2
ED(†)-4008
2
1
8
19-5/16
8-1/4 11-5/8 26-1/4
145
NOTE: Call for complete dimensional information.
* Lug, plain, geared, or motorized trolley mounting.
† Specify ED for rigid lug, EDT for plain trolley, EDGT for geared trolley & EDMT for motorized trolley models.
Hoists
10
10-17
WWW.HANESSUPPLY.COM
1/2 - 2 Ton
Made in USA
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Electric Chain Hoists
Harrington
ED-II/Dual Speed Adjustable
Harrington
ED-II/Single & Dual
Single Phase Electric Chain Hoist
Single Phase Electric Chain Hoist
In our ED Series of electric chain hoists, we offer the
user a powerful combination of benefits. A wide variety
of lifting speeds. A low headroom designed to fit most
applications. A unique, ergonomically designed,
one-handed cylinder control that results in maximum
load control. These features tied together with the
convenience of single-phase power, make these hoists
ideal for both commercial and industrial applications.
• Maximum extension – 9 ft. of lift.
• High Speed/Low Speed control.
• One hand cylinder control buton.
• Detachable hook.
• Screw adjustment for low speed setting.
Specifications
Dual
Dual
Single
Speed
Speed
Adj.
S Model DS Model DA Model
Cap.
(lbs)
125
220
250
350
400
525
Prod.
Code
ED125S
ED220S
ED250S
ED350S
ED400S
ED525S
Prod.
Code
ED125DS
ED220DS
ED250DS
ED350DS
ED400DS
ED525DS
Lifting Speed
(ft/min)
Std. Lift
(ft)
Prod.
S
DS & DA
Code
Model Model
ED125DA
69
69/13
ED220DA
43
43/10
ED250DA
26
26/10
ED350DA
66
66/13
ED400DA
26
26/10
ED525DA
44
44/10
S & DS
Model
Push Button
Cord: L (ft)
DA
Model
S & DS
Model
Intermittent Duty
0.4
10
6
8
Rated
Max. Start Duty Current
Freq.
Rating at 120V
(Times/Hr) (min) (amps)
Motor Duty
DA
Output Rating
Model (HP)
% ED
Coiled
0.8
0.4
0.8
30
180
15
5
20
30
20
30
120
180
120
180
10
20
10
20
6
10
6
10
Dimensions (in)
Cap.
(lbs)
125
220
250
350
400
525
Headroom
C (in)
S & DS
DA
Model Model
12.4
13.0
12.4
13.0
37.2
37.8
37.2
37.5
a
d
e
f
14.6
7.4
7.2
8.1
16.9
14.6
16.9
8.1
7.4
8.1
8.8
7.2
8.8
8.6
8.1
8.6
g
1.0
h
i
4.8
3.1
5.3
4.9
5.3
j
k
13.4
1.0
3.3
3.1
3.3
14.3
13.4
14.3
S
Model
23
23
24
33
24
33
Net Wt.
(lbs)
DS
Model
24
24
25
34
25
34
Wt. for Additional
One Foot of Lift
(lbs)
S
DS
Model
Model
DA
Model
31
31
32
40
32
40
0.26
0.29
EC Turnover Hoists - EC Hoists for Special Applications
• Operation - Load hooks operate in opposite directions.
Coffing EC Turnover Models - Specially modified EC hoist designed for
• Application - Completely inverts virtually any shape load
machining, assembly, or repair applications which require complete rotation
with use of simple slings and successive repositioning
and/or precise positioning of large, non-symmetrical work pieces.
of load hooks.
• Capacities & Lifts - Rated loads from 1/4 to 4 Tons. Lift stroke is 15-foot
• Accessories - Full line of options to meet a variety
standard. Consult factory for longer lift strokes.
of applications.
• Voltage - 230/460, three phase motors standard. Consult factory for other
• Lifetime Warranty.
voltages and two speed motors.
Housing Dim. (in)
Capacity Model Frame Load ChainLift Stroke
Motor Lift SpeedHeadroom
Net Wt.
• Suspension Options - Rigid lug mount only.
(Lbs) (Ton)
Number
Size* Length (Ft)
(Ft)
HP
(FPM)
(in)
H
W
L
(Lb.)
Allows attachment to load hook of another hoist
500 1/4 EC-0516-TH
S
16
15
1/4
16
19-7/8
9-7/8
11-5/8 23-3/8
120
for vertical lifting.
1,000 1/2 EC-1016-TH
S
16
15
1/2
16
19-7/8
9-7/8
11-5/8 23-3/8
126
2,000
1
EC-2016-TH
S
16
15
1
16
19-7/8
9-7/8
11-5/8 23-3/8
138
• Two Load Hooks - Color coded load hooks
with corresponding push button for operator
4,000
2
EC-4016-TH
L
16
15
2
16
28-1/2 12-5/16 14-13/16 31-3/16
325
6,000
3
EC-6008-TH
L
34**
15
3
8
33
13-5/16 15-3/8 31-3/16
385
convenience.
8,000
4
EC-8008-TH
L
34**
15
3
8
33
13-5/16
15-3/8
31-3/16
390
* S = Small frame hoist, single or three phase. L = Large frame hoist, three phase only.
** Each load block is double-chained on 6000 lb. and 8000 lb. models. NOTE: Call for complete dimensional data.
Engine block is
raised straight up
(1) by special
cylinder lift rings,
then rotated approx. 450 until one
load hook (2) supports total weight.
Sling is guided
under block and attached to free hook
(3). Hoist is then
reversed (4) until
block is inverted.
How to Specify Coffing Electric Chain Model
Numbers
Models
Electric Chain, Hook Mounted
Electric Chain, Hook Mounted
Electric Chain, w/Plain Trolley
Electric Chain, w/Plain Trolley
Electric Chain, w/Geared Trolley
Electric Chain, w/Motorized Trolley
Electric Chain, w/Motorized Trolley
Extended Duty, Lug Mounted
Extended Duty, w/Plain Trolley
Extended Duty w/Geared Trolley
Extended Duty w/Motorized Trolley
Capacity
(lb)
02
250
05
500
10 1,000
20 2,000
40 4,000
60 6,000
80 8,000
100 10,000
WWW.HANESSUPPLY.COM
Lift
Speed
04
05
06
08
09
10
12
16
24
32
64
4 FPM
5 FPM
6 FPM
8 FPM
9 FPM
10 FPM
12 FPM
16 FPM
24 FPM
32 FPM
64 FPM
Voltage
1
2
3
4
5
6
7
8
115/230 V (Single-Speed)
230 V (Two-Speed)
230/460 V (Single-Speed)
460 V (Two Speed)
575 V (Single-Speed)
575 V (Two-Speed)
208 V (Single-Speed)
208 V (Two-Speed)
Consult your Sales Rep.
for special voltages
Lift
10
15
20
25
30
35
40
45
10 Ft.
15 Ft.
20 Ft.
25 Ft.
30 Ft.
35 Ft.
40 Ft.
45 Ft.
Etc.
10- 18
10
Hoists
EC
ELC
ECT
ELCET
ECGT
ECMT
ELCMT
ED
EDT
EDGT
EDMT
EC - 05 16 - 1 - 10
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Electric Chain & Wire Hoists
JLC Top Hook and Lug Suspension - The Choice for Value and Performance
Coffing JLC Models - Designed for industrial duty performance. Compact
in size, the JLC features a multiple disc motor brake, overload clutch,
and chain end stop for safety.
• Capacities & Lifts - Rated loads from 1/8 to 2 Tons, with 10, 15, and
20 foot standard lifts. Other lifts available. Standard push button drop
is 4-feet less than lift.
• CSA Approved.
• Voltages - 115/230 - single phase; 230/460, 208, 380, 415, 575 - three
phase, 60 hertz standard, 50 hertz available.
Capacity
(Lbs) (Ton)
250 1/8
500 1/4
500 1/4
1,000 1/2
1,000 1/2
2,000 1
4,000 2
No. of Motor
Model
No.
Chains
HP
JLC-0232
1
1/4
JLC-0516
1
1/2
JLC-0532
1
1/2
JCL-1016
1
1/2
JLC-1032
1
1
JLC-2016
1
1
JLC-4008
2
1
• Two-Speed Hoist Models - Optional with 3 to 1
speed ratio, three-phase, single voltage only.
• Limit Switches - Adjustable to regulate upper
and lower load travel. Brass nuts standard for
improved repeatability and chain positioning.
• Oil Bath Transmission - Precision machined
alloy steel gears run in oil bath for longer, quieter
operation.
• NEMA 3R Push Button Station - Ergonomic design fits
operator's hand for thumb or two-handed
Lift Speed (FPM) Headroom*
Housing Dim. (in)
Net Wt. operation. 24 Volt Control for operator safety.
Single Two
(in)
H
W
L
(Lbs)** 115 Volt Control available upon request.
• Frame - Compact aluminum housing for
32
10.7
18-1/8
8-11/16 8-11/16 24-1/8
63
16
5.3
18-1/8
8-11/16 8-11/16 24-1/8
63
portability and ease of installation.
32
10.7
18-1/8
8-11/16 8-11/16 24-1/8
75
• Accessories - Call for complete details.
16
5.3
18-1/8
8-11/16 8-11/16 24-1/8
75
• Lifetime Warranty.
32
10.7
18-1/8
8-11/16 8-11/16 24-1/8
88
16
8
5.3
2.7
18-1/8
20-13/16
8-11/16 8-11/16
8-11/16 8-11/16
24-1/8
24-1/8
90
100
1/8 - 2 Ton
Made in USA
* For hook and lug mounted models only. ** Weight and dimensions for 10 ft. lift, single phase, top hook and lug suspension units.
NOTE: Call for complete dimensional data.
JLC Trolley Suspensions
Coffing JLCET and JLCMT Models - Plain and motorized trolley
suspensions with all the features of the basic JLC models for added
flexibility in a variety of applications.
• Plain Trolley - For manual positioning of hoist and load.
• Motorized Trolley - For faster positioning of hoist and load over longer
distances. 35 or 75 FPM speeds standard other speeds available. Trolley
brake optional.
• Voltages - 115/230 - single phase; 230/460, 208, 380, 415, 575 - three
phase, 60 hertz standard, 50 hertz available.
• Two-Speed Motorized Trolley Models - Optional with 3 to 1 speed ratio,
three-phase, single voltage only.
JLCET
Model Trolley JLCET
JLCMT Flange*
(lb) (ton) Number Mount † Hdrm (in.) Hdrm (in) Width
(in)
JLC(†)250 1/8
C
17-15/16 17-15/16
3-8
0232
JLC(†)500 1/4
C
17-15/16 17-15/16
3-8
0516
JLC(†)500 1/4
C
17-15/16 17-15/16
3-8
0532
Capacity
Min.
JLCET JLCMT
Beam
Rad
Net Wt. Net Wt.
Ht.
Curve
(in)
(lb)
(in)
(in)
5-12
48
87
173
5-12
48
87
173
5-12
48
99
185
1000
1/2
JLC(†)1016
1000
1/2
JLC(†)1032
C
17-15/16 17-15/16
3-8
5-12
48
112
198
1
JLC(†)2016
C
17-15/16 17-15/16
3-8
5-12
48
114
200
2000
C
17-15/16 17-15/16
3-8
5-12
48
91
185
CM Motorized Trolley - Smooth, Reliable Operation
Coffing MT Model Trolley - Features rugged construction with wraparound side plates and heat treated wheels for reliable service. Universal
clevis allows quick mounting of most hook mounted electric chain hoists.
• Capacities - Rated loads from 1/4 to 5 Tons. Push button drop is 6-feet.
• Voltages - 115/230, 208 - single phase; 230/460, 208, 220/380, 575 three phase, 60 hertz standard, 50 hertz available.
Hoists
10
Capacity
(lbs) (ton)
500 1/4
500 1/4
1,000 1/2
1,000 1/2
2,000
1
2,000
1
3,000 1-1/2
3,000 1-1/2
4,000
2
4,000
2
6,000
3
6,000
3
8,000
4
8,000
4
10,000
5
10,000
5
10-19
Model
Number
MT-05035
MT-05075
MT-10035
MT-10075
MT-20035
MT-20075
MT-30035
MT-30075
MT-40035
MT-40075
MT-60035
MT-60075
MT-80035
MT-80075
MT-100035
MT-100075
Motor Flange Min. Rad. Net Wt.
HP Width (in) Curve (in) (Lb)
1/4
3.332-7
48
115
1/4
3.332-7
48
115
1/4
3.332-7
48
115
1/4
3.332-7
48
115
1/4
3.332-7
48
115
1/4
3.332-7
48
115
1/4
3.332-7
48
115
1/4
3.332-7
48
115
1/4
3.332-7
48
115
1/4
3.332-7
48
115
1/4
3.332-7
48
115
1/2
3.332-7
48
115
(2)1/4
4-7
**
220
(2)1/2
4-7
**
220
(2)1/4
4-7
**
220
(2)1/2
4-7
**
220
** 4 & 5 Ton straight track
only. Articulated
model for 48"
min. radius
curved track
available –
consult your
Sales Rep.
Note: Pleas call
for complete dimensional data.
• Wrap-Around Side Plates - Act as safety
lugs and as bumpers to protect wheels.
Available to fit American Standard
I-Beams, wide-flange, and patented track
beams.
• Precision Trolley Wheels - Machined, cast
iron wheels with sealed, lifetime lubricated
ball bearings for extended trolley life.
Motorized trolley wheels are heat treated
for added durability, with bronze and
stainless steel wheels optional.
• Trolley Design - 4-wheel design
negotiates 48" minimum radius curve,
including patented track applications (60"
1/8- 2 Ton
for JLCET 2-Ton only). Specify track type
Made in USA
and beam size.
• Lifetime Warranty.
† Specify JLCET for plain trolley and ELCMT
for motorized trolley models.
+ P = Parallel Mount, standard on all JLC trolley models.
+
* For JLCMT models, standard flange adjustment
is 3.33 - 6" and standard beam height is 6 -18".
NOTE: Call for complete dimensional data.
• Speeds - 35 and 75 FPM speeds standard
with optional speeds of 18, 24, 50, 100,
and 150 FPM.
• Two-Speed Models - Optional with 3 to 1 speed
ratio, three-phase, single voltage only. Slow
speed feature for gentler start and greater
positioning accuracy.
• Mounting - Universal clevis will accept top hook
models. Can change EC and ELC suspensions
to lug mount directly to MT trolley – consult
1/4 - 5 Ton
your Sales Rep.
Made in USA
• Trolley Design - 4-wheel design on 1/4 - 3 Ton
and under. 8-wheel design on 4 and 5-Ton for
reduced beam flange stresses. Specify track
type and beam size.
• NEMA 3R Push Button - Ergonomic design fits operator's hand for thumb
or two-handed operation. 24 Volt Control standard for operator safety.
115 Volt Control available upon request.
• Accessories - Trolley brake and other options available to meet a variety
of applications.
• Lifetime Warranty.
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Accessories for Electric Chain Hoists
Fabric Chain Container – CM Lodestar & Valustar Models
CM’s chain bags offer an alternative to the standard metal chain container
for use with Lodestar or Valustar electric chain hoists. Chain bags are
made from an open weave vinyl coated polyester designed especially
for extended outdoor life. Not recommended for applications over 300°F,
in extremely caustic environments or for chain weight exceeding 300 lbs.
Maximum length of lift (ft)
Models Models Models Models
E-H J, JJ, L, LL R, RR Models
Product A-AA-B-C-F
WB-WF WH-WE Wl-WJ
WR RT, RRT
Code
2470
20
10
–
–
–
2471
40
20
–
–
–
60
30
–
–
–
2472
2473
90
45
–
–
–
100
60
–
–
–
2474
2475
140
90
–
–
–
2476
–
–
10
–
–
2477
–
–
20
10
–
2478
–
–
30
15
10
–
–
45
20
–
2479
2480
–
–
60
30
20
2481
–
–
90
45
30
Bag
Size
(in)
7-1/2 x 7-1/2
7-1/2 x 7-1/2
7-1/2 x 7-1/2
7-1/2 x 7-1/2
7-1/2 x 7-1/2
7-1/2 x 7-1/2
7-1/2 x 7-1/2
7-1/2 x 7-1/2
7-1/2 x 7-1/2
7-1/2 x 7-1/2
7-1/2 x 7-1/2
7-1/2 x 7-1/2
Bag
Ht.
(in)
7
10
13
16
18
20
7
10
13
16
18
20
Approx.
Wt.
(lbs)
3
3
3
4
4
4
3
3
3
4
4
4
Features include:
• Flexible and lightweight material
• Dampens noise
• Will not hold water
• Excellent resistance to ultraviolet rays, mildew
stains, rot, and weather
• Moisture resistant - quick drying
• High tensile and tear strength
• Abrasion resistant
• No shrinkage
• Bags and brackets are suitable for chain
weights up to 300 lbs.
• Made in U.S.A.
Metal Chain Container –
CM Lodestar
• Convenient for slack chain
storage
• Simple one pin attachment
for easy installation
• Security cable included
• Available for every Lodestar
and Valustar model
• Made in U.S.A.
Maximum Length of Lift (ft)
Models
Approximate Models
Models
Models Models
Product Bucket Bucket
J, JJ, L
Shipping Wt A, AA, B,
E&H
R & RR RT & RRT
Code Length ‡ Diameter
C&F
& LL
(lbs)
2450
8
5
4
10
2451
11
5
5
20
10
10
2452
14
5
5
30
15
15
2453
17
5
6
40
20
20
10
2454
20
5
7
50
254
25
2455
23
5
7
60
30
30
15
10
2456
31
5
9
90
45
40
20
2457
36
5
10
100
50
60
30
20
2458
48
5
13
140
*70
90
45
30
2461
10
10
13
44
22
20
14
9
2463
15
10
15
104
52
66
33
2210
2464
20
10
17
166
83
106
53
35
2465
25
10
20
230
115
144
72
48
2466
30
10
23
290
145
150
90
60
† Advise if bucket length
causes headroom problems,
larger diameter shorter
length buckets available.
* E & H limit switch
maximum is 60 ft.
When ordering, specify
code number(s), model
capacity, beam size, power
supply, suspension, lift,
extra control cord or power
cord (if required) and type
of electrification
(if required).
Weather Resistant Covers (Fits Coffing EC & ELC Models)
• Models - To fit Coffing EC
and ELC models.
• Material - Waterproof to
protect hoist in outdoor use.
• Safety - Does not interfere
with normal hoist operation
while in place.
For Small Frame EC Models EC-0516 - EC-4008 (except EC-2032)
Hoist Rated Load (lbs)
Type of Mount
Part No.
500
Hook or Lug
EC-760-1
1,000
Hook or Lug
EC-760-2
2,000
Hook or Lug
EC-760-3
4,000
Hook or Lug
EC-760-4
6,000
Not Available
Not Available.
For Large Frame EC Models EC-2032, EC4016 - EC- 10008 (except EC-6005)
4,000
Hook
EC-761-1
4,000
Lug
EC-761-2
6,000
Hook
EC-761-3
6,000
Lug
EC-761-4
8,000
Lug
EC-761-5
10,000
Lug
EC-761-6
For Large Frame EC Models
EC-2032, EC4016 - EC- 10008
(except EC-6005)
10
10- 20
Hoists
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Accessories for Electric Chain Hoists
Chain Containers (Fits Coffing EC, ED, & JLC Models)
Cord Reels – Coffing
• Models - To fit Coffing EC, ED, and JLC models.
• Mounting - Suspends from hoist and does not interfere with hoist
operation. Suspension bracket included.
• Safety: Recommended where slack chain may create a hazardous condition.
Electrification necessary for Electric Chain Hoists
• Construction - NEMA 3R all-welded, solid steel construction.
UL and CSA listed.
• Design - Provides instant availability of power cord
and prevents looping and snagging.
• Ratchet Lock - Works in any position to hold cord in place
and may be disengaged for constant use.
• Cable Guide - Multi-position, field adjustable,
and removable for different payout configurations.
• Collector Assembly - Rated at 600 volts.
• Optional Pivot Base - For 340O off-line payout.
Model
No.
“ ”
Dim.
(in)
Capacity (in Feet Per Hoist Lift)
1-Chain
2-Chain
3-Chain
Single
Double
Triple
For Small Frame EC Models EC-0516 - EC-4008
(except EC-2032), EC-6005, and all ED Models
927JG17
927JG18
927JG19
927JG20
927JG202A
927JG203A
927JG204A
10-7/16
12-1/2
16
20-1/4
20
24
35
20
25
35
50
75
100
150
10
12.5
17.5
25
37
50
75
N/A
N/A
12
17
25
33
50
Cable Size
(AWG)
No. 14-3 Conductor
No. 14-3 Conductor
No. 14-4 Conductor
No. 14-4 Conductor
For Large Frame EC Models EC-2032,
EC-4016 - EC-10008 (except EC-6005)
927JG201
927JG202
927JG203
927JG204
927JG205
927JG207
927JG208
16
20
24
35
48-3/4
26
32
15
30
50
75
100
150
200
N/A
15
25
37.5
50
75
100
For JLC Models - Molded Polyeolefin
20-1/2
20
10
16
35
17
20-1/4
50
225
N/A
Over 50
25
For JLC Models - Fabric Type
JLC927-20F
16
20
10
JLC927-35F
22
35
17-1/2
JLC927-50F
26
50
25
JLC927-70F
31
70
35
JLC927-1
JLC927-2
JLC927-3
JLC927-4
N/A
10
16.5
25
33.3
50
66.6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Festooning Packages (Coffing)
• Flat Cable Kit - Includes suspension wire and power cable.
• Round Cable Kit - Includes suspension wire but not power cable.
Model
Cable Size Length
No. of
No.
(Gauge)
(F.t)
Carriers
Flat Cable Festooning Package
HEF-12-35
12
35
4
HEF-12-50
12
50
6
Round Cable Festooning Package
HER-35
–
35
4
HER-50
–
50
6
Hoists
10
10-21
WWW.HANESSUPPLY.COM
Model
No.
DN-3-25
DN-3-50
DN-4-25
DN-4-45
Phase
1
1
3
3
Active Cable
Length (Ft.)
25
50
25
45
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Air Chain Hoists
AirStar 6 Air Hoist
Rated
capacity* Product
(tons)
code
Reeving
Model
AIRSTAR 6 WITH HOOK SUSPENSION
Standard Model
1
7405A
1
1
7405B
1
2
7406A
2
2
7406B
2
3
7407A
3
7407B
3
3
Spark Resistant Models
1/2
7408A
1
7409A
2
1
2
7410A
3
AIRSTAR 6 WITH LUG SUSPENSION
Standard Models
1
7405C
1
1
7405D
1
2
7406C
2
2
7406D
2
3
7407C
3
3
7407D
3
Spark Resistant Models
7408B
1
1/2
1
7409B
2
2
7410B
3
Full load
Full load
Approx.
hoist Speed** lowering speed**
net
(FPM)
(FPM)
Wt.
13
30
6
15
4
10
18
42
9
21
6
14
93
95
110
112
144
146
16
8
5
22
11
7
95
112
146
13
30
6
15
4
10
18
42
9
21
6
14
106
108
116
118
164
166
16
8
5
22
11
7
110
120
170
AirStar Air Hoist
CM AirStar is designed for general commercial applications where variable
speed pneumatic power is preferable. Rated for 1/4, 1/2 and 1 ton capacities, this compact, lightweight hoist features:
Rated Pull cord control
Cap.* Product Net wt.
Type
(tons) code no. (Ibs.)
AIRSTAR WITH HOOK SUSPENSION
Standard Models
Roller Chain
1/4
7400A
37
1/2
7401A
37
1
7402A
51
Link Chain
1/4
7400C
36
1/2
7401C
36
1
7402C
49
Spark Resistant Models
Link Chain
3/8
7403A
36
3/4
7404A
49
AIRSTAR WITH LUG SUSPENSION
Standard Models
Link Chain
1/4
7400F
36
1/2
7401F
36
1
7402F
49
Spark Resistant Models
Link Chain
3/8
7403C
36
3/4
7404C
49
Pendant **
throttle control
Product Net wt.
code no. (lbs.)
Reeving
Lifting Lowering
speed
speed
max.†
max.†
(FRM.) (FRM.)
7400B
7401B
7402B
7400D
7401D
7402D
47
47
61
46
46
59
1
1
2
1
1
2
65
45
23
65
45
23
95
120
60
95
120
60
7403B
7404B
46
59
1
2
60
29
100
52
7400G
7401G
7402G
46
46
59
1
1
2
65
45
23
95
120
60
7403D
7404D
46
59
1
2
60
29
100
52
** Equipped with 6 ft. pendant control.
† Speeds based on 90 PSI line pressure and with full rated hoist load.
Hoist speeds are adjustable and can be reduced to 50% of full rated speed. Shipped from factory
with hoisting speed set at maximum rated speed; lowering speed set at reduced speed.
Standard lift 10 feet. Longer lifts available.
CM AirStar 6 air hoist is designed for general industrial applications where
variable speed pneumatic power is preferable. Rated for loads of up to 3
tons. This compact, lightweight hoist features:
• CM Hoistaloy load chain for heavy duty or stainless steel chain for spark
resistant, medium duty loads
• Lightweight aluminum frame and cover
• Positive action, spring biased Weston-type load
brake holds the load, provides exacting load spotting
and control
• Multi-vane rotary air motor with eight vanes for high
torque, smooth operation, positive starting
• Precision cut heat treated helical and spur gear
combination for quiet, efficient operation
• Pendant throttle handle is full flow design for precision throttle capabilities
• Spark resistant models available for hazardous
environments
• Hook or lug suspension available
• Standard overload protector device
• Chain container optional
• Lifetime warranty
• Made in U.S.A.
** Hoist speeds based on 90 PSI line
pressure with full load at throttle.
• CM Hoistaloy load chain for heavy duty or stainless steel chain
for spark resistant, medium duty loads
• Positive action, heavy-duty shoe type brake
that holds the load
• Multi-vane rotary air motor for high torque,
smooth operation
• Accurately machined heat treated alloy steel spur gears
• Spark resistant models available for hazardous
environments
• Pull cord or pendant throttle control available
• Pull cord control hoists provide a lightweight,
economical hoist for accurate control of loads
• Hook or lug suspension available
• Optional pendant throttle control hoists offer ergonomic,
one-hand control for ease of operation
• Inlet air swivel with built-in strainer provides free
hoist movement
• Aluminum frame and end cover contributes
to the lightweight, easily portable, and rugged design
• External brake adjustment
• Limit stops prevent over-travel in upper
and lowering directions
• Equa-torque gearing of alloy steel, heat treated spur gears
are accurately machined to provide a close meshed,
compact gear reduction
• Tapped exhaust port 1/2 NPTF... for cleanroom applications
or to add a supplemental muffler in addition to the built-in muffler
for even quieter operation
• Lifetime warranty
• Made in U.S.A.
10
10- 22
Hoists
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Air Chain Hoists
Profi - J.D.Neuhaus
JDN Air Hoists Profi Series are very robust and therefore suitable for tough
industrial applications even in continuous working processes. According
to your requirements, there are various control systems available. For
traversing loads there are also different trolley designs to meet your
particular demands.
Where the JDN Profi excellence has been proven:
Aircraft construction, assembly lines, chemical industry, dairies, electro
plating, explosives and pyrotechnics industry, food industry, foundries,
furniture industry, glass industry, lacquer and varnish factories, match
industry, mechanical engineering, auto industry, oil storage plants,
on and offshore, paint shops, paper industry, power plants, refineries,
sawmills, shipyards, space industry, tempering plants, textile industry.
Standard features
• Suitable for application in hazardous areas
• Sensitive infinitely variable speed control for the precise
positioning of loads
• Easy operation
• Suitable for lube-free operation
• 100% duty rating and unlimited duty cycles
• Low maintenance
• Low headroom, lightweight
• Sound absorption
• Insensitive to dust, humidity, and temperatures ranging
from -20°C bis +70°C
• From 1t upwards with overload protection
(EC-version)
Type
25TI
30TI
85
85
6
6
Capacity
25
30
Number of Chain Strands
2
2
Motor Output
kW
6.3
6.3
ft/min
7.9
3.3
Lifting Speed Without Load
m/min
2.4
1
ft/min
4.1
7.9
Lifting Speed at Full Load
m/min
1.25
2.4
ft/min
9.2
9.2
Lowering Speed at Full Load
m/min
2.8
2.8
cfm
230
230
Air Consumption at Full Load - Lifting
m3/min
6.5
6.5
cfm
102
102
Air Consumption at Full Load - Lowering
m3/min
2.9
2.9
Air Connection
G1-1/2
G1-1/2
inch
1-1/2
1-1/2
Hose Dimension (0 inside)
mm
35
35
lbs
1213
1213
Weight with Standard Lift, Rope Control
kg
550
550
Chain Dimension
mm
23.5 x 66 23.5 x 66
lbs/ft
8.2
8.2
Weight of Chain
kg/m
12.2
12.2
ft
10
10
Standard Lift
m
3
3
ft
6.5
6.5
Length of Control at Standard Lift
m
2
2
Noise Level at Full Load* - Lifting
78
78
78
Noise Level at Full Load* - Lowering
82
82
82
Air Pressure
PSI
bar
mt
37TI
85
6
37.5
3
6.3
5.6
1.7
2.5
0.75
6.6
2
230
6.5
102
2.9
G1-1/2
1-1/2
35
1874
850
23.5 x 66
8.2
12.2
10
3
6.5
2
78
82
40TI
85
6
40
3
6.3
2.3
0.7
5.6
1.7
6.6
2
230
6.5
102
2.9
G1-1/2
1-1/2
35
1874
850
23.5 x 66
8.2
12.2
10
3
6.5
2
78
82
Technical Details
• Smooth starting, low maintenance vane motor
• Chain sprocket in the mid section runs in dust-proof
maintenance-free ball bearings
• Planetary gear box with long-life grease lubrication, all gears made
of tempered or hardened high-grade steel
• Load chain and hooks manufactured from high quality tempered steels
with a breaking strength of five times the nominal load
The advantages at a glance
• Strong – Fast – Silent
• High performance with more efficiency by reliability plus high lifting
and lowering speeds. Low sound emissions.
• High Level of Safety
• Integrated emergency stop switch in the main air supply*.
• From 1t upwards with overload protection. Oil-free operation
• Patented, permanent motor lubrication during operation, using
a high-performance grease. No additional motor lubrication required.
• Patented Motor-Brake System
• For operation with low maintenance and little wear. Based on the proven
design of the JDN Mini Series.
• Modern Design – Compact Size
• No protruding control hoses or parts susceptible to damage
• PROFI also suitable for horizontal pulling.
100% Duty rating – No Downtime
50TI
85
6
50
4
6.3
4.3
1.3
1.8
0.55
5.3
1.6
230
6.5
102
2.9
G1-1/2
1-1/2
35
2072
940
23.5 x 66
8.2
12.2
10
3
6.5
2
78
82
60TI
85
6
60
4
6.3
1.5
0.45
4.3
1.3
5.3
1.6
230
6.5
102
2.9
G1-1/2
1-1/2
35
2072
940
23.5 x 66
8.2
12.2
10
3
6.5
2
78
82
75TI
85
6
75
4
10
1.5
0.45
2.8
0.85
3.3
1
230
6.5
102
2.9
G1-1/2
1-1/2
35
5622
2550
23.5 x 66
8.2
12.2
10
3
6.5
2
78
82
100TI
85
6
100
4
10
2.3
0.7
1.1
0.35
2.6
0.8
390
11
425
12
G1-1/2
1-1/2
35
5820
2640
32 x 90
14.3
21.3
10
3
6.5
2
88
89
* Measured at 1m distance acc. to DIN45635 part 20 Group mechanism at 6 bar: Profi 25TI - Profi 50 M3 (1Bm), Profi 100TI M2 (1Cm)
4 bar versions on request
Hoists
10
10-23
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Wire Rope Winch-Hoists
Aluminum alloy
frame-anodized
on Marine models
Portable Cable Winch-Hoists - LUG-ALL
Self- lubricating bearings
Interlocking Pawl
System will not slip
Three Basic Frame Sizes
All cable stores on drum
Lift, lower, pull, bend, stretch, tighten at any angle, in any
position (when used in accordance with accepted rigging
practices)
Double
Cable
Lift
Lightweight, portable Lug-Alls are easy to carry...easy to rig.
Safe and sturdy, these dependable cable ratchet-lever
winch-hoists have unlimited applications in industry and
construction. Safety features include reversible handle that
bends when the hoist is severely overloaded, and an
interlocking pawl system that provides positive control.
Open
construction for
daily visual
inspection
Single
Cable
Lift
Reversible handle
bends on overload
to protect user
and hoist
Cable guide allows
cable to move freely
within guide
A variety of Lug-All models is available in four basic frame
sizes. Options include rapid lowering for backing off 4
notches-per-stroke, and marine grade for highly corrosive
conditions. Call for additional details.
Crimped copper sleeve
7 x 19 Highly
flexible aircraft cable
LUG-ALL CAR DOOR PULLERS - Compact and portable–
but rugged enough to open box car doors without banging or
prying. With a Lug-All, even dislodging stuck doors becomes
a one-man job.
Medium
Frame
Large
Frame
360 Swivelling hook with latches
for positive load engagement
Model 30-HDR, 3000 lb. - capacity, 30ft. cable
Model 12-HDR, 3000 lb. capacity, 10 ft. cable.
Double Line Capacity
Sm.
Med.
Lg.
Cap. Tons
LUG-ALL
Model No.s
1/2
3/4
1-1/8
1-1/8
1-1/2
1-1/8
1-1/2
2
3
1000-15* or 115-R*
1500-25 OR 125-R
2250-15 OR 215-R
2250-20
3000-10 OR 310-R
2250-38 OR 238-R
3000-30 OR 330-R
4000-20 OR 420-R
6000-15
Cap.
(lbs)
Handle
Lifting
Pull for
Distance
Full Load
(ft)
(lbs)
—
1,500
2,250
2,250
3,000
2,250
3,000
4,000
6,000
—
67
86
86
100
100
100
115
110
—
12-1/2
7-1/2
10
5
19
15
10
7-1/2
Single Line Capacity
Min.
Distance
between
Hooks (ft)
Cap
(lbs)
—
21
21
21
21
23-1/2
23-1/2
26-1/2
34
1,000
750
1,125
1,125
1,500
1,125
1,500
2,000
3,000
Handle
Lifting
Pull for
Distance
Full Load
(ft)
(lbs)
77
65
83
83
97
83
97
110
105
Cable
Min.
Distance
between
Hooks (in)
15
25
15
20
10
38
30
20
15
Dia. Length
(in)
(ft)
16
16
16
16
16
18
18
18-1/2
26-1/2
3/16
5/32
3/16
3/16
7/32
3/16
7/32
1/4
5/16
16
26
16
21
11'6"
39'6"
31'6"
22
18
Total Wt.
(lbs)
7
8-1/2
8-3/4
9-1/4
9
13-3/4
13-3/4
15-1/2
34
Suffix “R” denotes rapid lowering units.
*Without pulley block
Specifications subject to change without notice.
For Marine Grade (with stainless steel cable, anodized castings, and oiled-for-life bearings throughout) add suffix “M” to model number.
Pow'R-Pulls
Maasdam Pow’R-Pull®
LIFETIME WARRANTY
For over 60 years, Maasdam has produced
Pow’R-Pulls to exacting standards. Using
only premium components, we produce the
finest quality winch/ puller available, backed
by a full Lifetime Warranty- a first for
domestic winches.
144S-6
1 Ton
Pow'R-Pull
Features:
• 1 piece, aluminum alloy ratchet wheel
• High strength, electro-plated steel parts
• “Notch-at-a-time” letdown
• Drop forged steel slip hooks
• Non-slip plastic grip
• OSHA recommended safety latches
• Uses galvanized, aircraft quality cable
Part
No.
144SB-6
144S-6
Cap.
(ton)
2
1
Max.
Lift (ft)
6
12
Cable
Dia. (in)
3/16
3/16
Leverage*
30:1
15:1
Ship. Wt.
(lbs/oz)
8 lbs 12 oz
7 lbs 10 oz
144SB-6
2 Ton
Pow'R-Pull
* Ratio of pressure exerted on handle to load placed on cable. For example,
10 pounds of pressure exerted on handle of part no. 144SB-6 with a 30:1 load
factor places load of 300 pounds on cable
Strap Pull'Rs - LIFETIME WARRANTY
Pow'R-Pull features... Strap Pull'R benefits
• Flexible strapping material conforms to and controls
the load – non-conductive properties
• Precision-cast aluminum alloy ratchet wheel – one piece
construction
• Interlocking, precision fit, steel alloy pawls with safety
spacer sleeve
• Cold rolled, high strength, tempered steel frame and handle
• Drop-forged steel slip hooks with osha recommended
safety latches
• Heavy gauge steel, reinforced ratchet guard
WS-25
• Aircraft-type, heat treated bolts
1 Ton Strap Pull'R
w/25'
Strap
• High tensile, fully rotating steel swivel
• Trouble free, “notch-at-a-time” letdown
• Permanent, comfortable, non-slip grip
Part
No.
WS-25
Cap.
(ton)
1
Strap
Lgth. (ft)
25
Leverage*
10:1
Ship. Wt.
(lbs/oz)
7.67 lbs
* Ratio of pressure exerted on handle to load placed on strap.
10
10- 24
Hoists
WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Wire Rope Winch-Hoists
Long Haul Rope Pullers
Useful cost-effective options
LIFETIME WARRANTY
• Manufactured to the same exacting standards as our
other pullers
• Uses highway approved, 1/2" diameter wear resistant
dacron® polyester rope – twisted or braided
• Can Accommodate an Unlimited Length of Rope
Part
No.
A-20
Cap.
(ton)
3/4 Ton
Max.
Rope
Lift (ft) Dia. (in) Leverage*
20
1/2
10:1
Five hook styles that are designed to meet your application
requirements and work practice standards. Models equipped with hot stick
levers, rings, and hot stick latches for remote operation using approved hot
line tools. All make for smooth operation with heavy insulated gloves.
The Right Hook for Any Application
Standard Latching Hook (A) – Forged alloy steel hooks for lasting strength
and durability. Latches are standard.
Ship. Wt.
(lbs/oz)
8.8 lbs
Swivel Gate Hook (U) – Hook latch revolves on hook shank and locks
under spring tension in open or closed position.
Hot Stick Ring with Standard Latching Hook (B) – Hot stick hooks have a
welded 1-inch diameter ring and standard latches for use with approved
hot stick tools.
The More Power Puller®
The Wyeth-Scott Co.
WARNING!
These hoists are intended for industrial use and not for lifting or
supporting human cargo.
2 Ton Capacity (with double line)
This heavy-duty industrial portable ratchet
puller/hoist has been designed and proven to
perform in a variety of demanding environments
without bending, breaking, or collapsing.
The components are made of solid, thick cast iron.
The cable is 5/16" flexible wire rope. The More
Power Puller® is not light-weight like other brands of
come alongs. This cable puller is 27 pounds of
Model
iron and steel.
Features:
• 2 ton and 3 ton capacity (dead lift rating)
• Dimensions: 17” length x 6” width x 8” height
Cable
Lgth (ft)
20
30
35
20
No.
2-20
2-30
2-35C
1-1/2-20*
Wt.
(lbs)
25
27
28
23
Insulated for Electrical Work*
• 27 lbs. of solid ductile and malleable iron construction
Swivel Gate Hook with Hot Stick Ring (UB)
– Offers same revolving and locking hook
shank features as our standard swivel gate,
but incorporates a 1-inch diameter welded
hot stick ring.
• Extra heavy duty 5/16" (6 x 37) wire rope
• More built-in safety factors than other brands
• Easily field repairable and inexpensive to maintain
• Lasts for generations
Webstrap Pullers/ Hotstick Hoists
Hot Stick Ring with Hot Stick Hook Latch
(HB) – Hot stick hook latch models have
rings on the hook and latch for use on energized lines. Using holding sticks, the latch
and hook can be easily manuvered.
Designed for overhead maintenance and construction of energized lines.
Engineered for reliable operation
LUG-ALL Models
2, 3 and 4 Insulated
Winch Hoists
Meets ANSI B30.21 and has been tested to 125% of rated load.
Forged Hooks with latches.
Double flanged drum prevents the web strap from coming in contact with
the ratchet teeth.
Exclusive breakable stress link that signals the operator of an overload
condition by breaking before the fiberglass handle breaks and/or
load-carrying part of the hoist is overloaded.
Positive load holding in all environments
Double interlocking pawl mechanism. No load brakes to slip or foul.
Ease of operation
Open frame construction allows for cleaning and visual inspection.
Self-lubricating bearings throughout the housing and on the pulley assure
smooth operation.
Hoists
10
Model
Capacity
(ton)
2-A
2-B
2-U
2-UB & HB
25-A
25-B
25-U
25-UB
25-HB
3-A
3-B
3-U
3-UB
3-HB
4-A
4-B
4-U
4-UB
4-HB
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
Single Pull
Distance
Min
16"
16"
18"
18"
16"
16"
18"
18"
18"
19"
19"
21"
21"
20"
19"
19"
21"
21"
20"
Max
9'-6"
9'-6"
9'-6"
9'-6"
7'-6"
7'-6"
7'-6"
7'-6"
7'-6"
11'-3"
11'-3"
11'-3"
11'-3"
11'-3"
9'-4"
9'-4"
9'-4"
9'-4"
9'-4"
Capacity
(ton)
1
1
1
1
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
Double Pull
Distance
Min
21"
21"
24"
24"
21"
21"
24"
24"
24"
27"
27"
30"
30"
29"
27"
27"
31"
31"
29"
Max
4'-5"
4'-5"
4'-4"
4'-4"
3'-5"
3'-5"
3'-4"
3'-4"
3'-4"
5'-1"
5'-1"
5'-0"
5'-0"
5'-0"
4'-1"
4'-1"
4'-0"
4'-0"
4'-0"
Strap Handle
Net
Length Length Weight
10'
10'
10'
10'
8'
8'
8'
8'
8'
11'-5"
11'-5"
11'-5"
11'-5"
11'-5"
10'
10'
10'
10'
10'
30"
32"
30"
32"
20"
22"
20"
22"
22"
30"
32"
30"
32"
32"
36"
38"
36"
38"
38"
Model 2 has formed opening for hook at bottom of frame, instead of eye bolt.
Every LUG-ALL is fully guaranteed for one full year against defective
workmanship and/or materials.
10-25
WWW.HANESSUPPLY.COM
10.25
10.5
10.75
11
10
10.5
10.5
10.75
11
14
14.5
15
15
15.25
15.5
16
16
16.5
16.25
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Griphoist- Trifor Wire Rope Winch/Hoist
GRIPHOIST – Hoist Technical Information
Approx.
Material Lifting Weight Wire Rope
Model Speed
Capacity (lbs) (lbs)
(lbs)
per Min
TU-17
7-9
2000*/1500**
18.5
Overall
Dimensions
20-3/4x93/4x4-1/2
60ft @ 28.9 26x13x5-3/4
30ft @ 8
TU-28
7-8
4000*/3000**
41
TU-32
7-9
8000*/6000**
59.5
30ft @ 8
T-508
7-9
2000*
14.25
30ft @ 8
T-516
6
4000*
30
60ft @ 18
T-532
6
8000*
51
30ft @ 8
27x13x6-1/8
16-1/2x
9-7/8x3-7/8
20-7/8x
12-7/16x5
24-7/16x14x
5-1/8
Grihoist-Trifor
Handle
Wire Rope
Ext./
Closed Dia.
Break
(in) Load (lbs)
28/18
5/16
10,000
45/26
7/16
20,000
45/26
5/8
40,000
27/16
5/16
10,000
45/26
7/16
20,000
45/26
5/8
40,000
* Capacity for material handling.
**Capacity for manriding - conform to all safety regulations.
Increase of Lifting and Pulling Power
Griphoist machines used in conjunction
with sheave blocks will efficiently solve
most of your pulling and lifting problems.
By using sheave blocks on the hauling
rope, the nominal capacity of Griphoist
machines can be multiplied 2, 3 and
even 4 times as shown in the diagram.
As a rule, it is not difficult to figure the
number of line parts to be used for a
given load. It is however important,
especially when there is a greater
number of line parts, to take into
account the friction in the sheaves,
which can have a non negligible
influence on the strain exerted on the
hoist and the top anchoring hook of
the block.
Lifting
TU-28
Material Hoisting
Capacity 1 ton
N.S.N. 3950-00-226-9444
1-1/2 tons manriding
U.L. classified
TU-17
T-532
N.S.N. 3950-00-724-6156
3/4 tons manriding U.L.
classified
Material Hoist
Capacity 4 ton
Pulling
x1
x1
x2
x3
x2
x4
T-516
TU-32
Material Hoisting Capacity 2 ton
N.S.N. 3950-01-006-0733
3 tons manriding
U.L. classified
x3
x4
BLOCSTOP® Fall Arrest Device - Griphoist
The BLOCSTOP is a fall arrest safety device which has been designed
to be mounted on a steel wire rope and to work in conjunction with a
scaffolding hoist. A set of jaws, used successfully in TIRFOR machines
over many years, serves as the gripping device.
The system is of the self-locking type i.e. if the wire rope is pulled against
the direction of the pull, the jaws automatically clamp onto the wire rope.
The greater the pull, the more the jaws grip the wire rope. The self-gripping
jaw system of the BLOCSTOP is designed not to damage the wire rope,
even when used in emergency situations.
Applications:
• On basketball backboards
• On spreader bars of overhead
cranes
• On special lifts for the handicapped
T-508
The Automatic BLOCSTOP BSA (continued)
When the hoist and BLOCSTOP BSA are mounted on an articulated
platform stirrup as it is generally the case in North America, the BLOCSTOP
BSA protects against the failure of the hoist and the main wire rope. When
the hoist and BLOCSTOP BSA are mounted on a stirrup which is rigidly
connected to the platform, as is generally the case in Europe, the
BLOCSTOP BSA not only protects against failure of the hoist and the main
wire rope but also against excessive slope of the platform. To ensure
operation of this BLOCSTOP BSA, the distance between the upper
suspension points has to be 100 mm.
• On canvas aircraft hangar doors
• When ascending lift shafts
• When stowing goods in aircraft
• For use as a mobile anchor lifting
device.
Model
BSA 15.301
BSA 15.303
BSA 20.300
BSA 20.303
BSA 20.330
BSA 20.301
BSA 35.30
The Manual BLOCSTOP BS
The hand operated BLOCSTOP of the BS type may be mounted either on
a safety wire rope and fixed to the platform or on the main suspension wire
rope above the scaffolding hoist.
When lifting a load, the wire rope passes through the BLOCSTOP. There
is no need to open the jaws. When lowering a load, the BLOCSTOP has
to be opened by lifting the operating lever upwards.
Model
BS 15.311
BS 15.301
BS 20.300
BS 20.303
BS 20.330
BS 20.301
BS 35.30
Cap.
(lbs)
1000
1500
1500
2000
2000
3000
6000
Wt.
(lbs)
4.4
4.4
8
8
8
8
19
For TIRFOR/TIRAK
Wire Rope Dia.
(in)
1/4
5/16
5/16
3/8
13/32
7/16
5/8
The Automatic BLOCSTOP BSA
Wt.
(lbs)
9
9
13
13
13
13
21
For TIRFOR/TIRAK
Wire Rope Dia.
(in)
5/16
3/8
5/16
3/8
13/32
7/16
5/8
The overspeed BLOCSTOP BSO
This type of BLOCSTOP may be mounted either on the main suspension
wire rope above the scaffolding hoist or on the safety wire rope. In North
America, the BLOCSTOP BSO is an integral part of our TIRAK hoist.
In this BLOCSTOP version the jaws are maintained in an open position
during normal operation. A centrifugal governor which permanently checks
the speed of the wire rope passing through the BLOCSTOP BSO, engages
the clamping mechanism when a preset overspeed is reached. It is,
therefore, a safety device against failure of the hoist or the main wire rope
run-off. In order to cover the case of a slow slippage of the hoist, this type
of BLOCSTOP BSO is also fitted with an emergency stop button, which
allows manual engagement of the clamping mechanism.
Model
Cap.
(lbs)
Weight
(lbs)
For
TIRAK
Series
Wire Rope
Dia
(in)
BSO 510
BSO 500
BSO 500
BSO 500
BSO 520
BSO 1000
BSO 1020
BSO 1030
660
1500
1500
1500
1500
1750
2000
2000
10
10
10
10
10
13
13
13
X-310
X-300
X-500
T-500
X-520
T-1000
T-1020
T-1030
1/4
5/16
5/16
5/16
3/8
5/16
3/8
13/32
WWW.HANESSUPPLY.COM
10
10- 26
Hoists
This type of BLOCSTOP is an automatic slack wire rope safety device
which can only be used on a secondary safety wire rope positioned parallel
to the main suspension wire rope.
Cap.
(lbs)
1500
1500
1500
2000
2000
3000
6000
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
Griphoist Information
5 Facts
• Griphoist is a universal tool: it is a hoist, a
winch, a tensioner, a binder, a puller and much
more.
• Griphoist is a portable tool: it has the lowest
weight to capacity ratio of any hoist or winch
with nearly comparable capacities.
• Griphoist is a unique tool: due to its unique wire
rope gripping system, it provides
unlimited pulling length or lifting height and pinpoint accuracy in positioning any work load.
• Griphoist offers safety: it
is simply designed and
ruggedly constructed
with the finest alloy
heat-treated steel. The
load is automatically
held securely with
overload protection.
• Griphoist is an
indispensable tool for
all construction and
maintenance jobs. It is
used daily by millions of
people all over the
world.
TU-17 - material lifting capacity 2000 lbs.
U.L. classified 1500 lb. man-riding capacity**
N.S.N. 3950-00-724-6165
T-532 - material
lifting capacity
8000 lbs.
The Manriding Specialist - moves platforms
and suspended
scaffolds for
rough casting,
cleaning, repairing, and painting
facades,
chimneys,
reservoirs, ships,
oil rigs, etc.
Other uses:
Building and
Installation:
guying formwork,
accurate positioning lightweight elements such
as air conditioning.
Electricity: tensioning lines, guying masts,
antennas, etc.
Agriculture: tensioning wire fencing, pulling out
trees, maintenance on equipment and buildings.
Leisure: de-ditching cars and pulling boats
ashore.
The Lightweight
#3 - again a
low-weight
machine (51 lbs.)
in comparison to
its capacity
8,000 lbs.)
Makes its use interesting for applications where
the weight factor is important.
T-516 - material lifting capacity 4000 lbs.
6 Models
Over 30 years of manufacturing experience are
behind the present T-500 and TU-GRIPHOIST
range which is protected by the original
GRIPHOIST patents and manufactured in 14
countries throughout the world under the
trademarks TIRFOR - GRIPHOIST - GREIFZUG.
The 3 new SUPER LIGHTWEIGHTS, Models
T-508, T-516, and T-532 are 20% lighter, more
compact and handy and have an improve load
capacity vs: weight ratio, and range in capacity
from 2000 - 8000 lbs.
The TU-GRIPHOIST range includes presently 3
hand-operated models with systematically
graduated capacities from 2000 up to 8000 lbs.
The TU-17, TU-28, and TU-32 are also accepted
for manriding in the major industrial countries
(for example by Underwriters Lab., Chicago, USA,
Germany, etc.)
The general principle may be described as a
“hand-over-hand” principle like a sailor pulling on a
rope: while one hand pulls, the other one changes
position in order to pull in turn.
The 2 jaw grips represent the 2 hands of the
GRIPHOIST: they grip the wire rope without
damaging it and alternately haul it during forward
motion and clamp it during reverse motion.
T-508 - material lifting capacity 2000 lbs.
Hoists
10
The Lightweight #1 - The T-508 is the lightweight
#1 of the new T-500 series. It has an improved
load capacity vs: weight ratio. Also new is that with
only a 60O angle lever operation you get a faster
lift or pull. This saves considerable amount of
energy, time and money. The T-508 is exactly right
for applications in construction, steel and frame
structures, mining, utilities etc.
The Lightweight #2 - for all jobs where
minimum weight is of maximum interest:
Steel erection: accurate positioning of metal
structures, guying
metal framework.
Electricity:
tensioning aerials
(electricity and
telephone), erecting
poles, assembling
pylons.
Transport: loading
and unloading,
securing loads.
Industry: rigging operations in workshops,
maintenance of machinery, installation of boilers,
valves, pipes, spotting railroad cars.
TU-28 - material lifting capacity 4000 lbs.
U.L. classified 3000 lb. man-riding capacity**
N.S.N. 3950-00-226-9444
The Allrounder - basic model which allows to
cover the largest field of applications. Due to its
sturdiness, the
best-suited hoist
for:
Construction, civil
engineering, and
public works:
lifting and removing
formwork,
positioning precast
elements,
reservoirs, erecting steel structures and cranes,
guying piling, planking and upright formwork,
lifting heavy suspended scaffolds, tensioning
safety nets.
Also: fire brigades and civil defense: removing
crash wreckage, installing temporary bridges,
demolishing buildings.
10-27
WWW.HANESSUPPLY.COM
Steel erection: fixing heavy girders, erection
steel buildings, derricks, silos; lifting hopper
bottoms; assembling tall aerial cableway pylons.
Industry: installation and removal of heavy
machinery, presses; removal for repairs of heavy
machinery parts in sugar mills, cement plants,
oil and chemical industries.
Transport: debogging trucks, securing heavy
loads.
TU-32 - material lifting capacity 8000 lbs.
U.L. classified
6000 lb. man-riding capacity**
N.S.N. 3950-01-006-0723
The Heavy-duty The strongest and the
sturdiest machine of
the whole range.
Indispensable for:
Construction:
moving complete
frameworks and
heavy formwork,
installing elevators
and escalators, lifting
heavy working platforms for construction or
maintenance of chimneys, blast furnaces,
containment vessels.
Public works: moving bridge structures, pulling
precast concrete beams into position, laying and
joining pipes (even underwater), tensioning
tracks and conveyor belts.
Army: countless use for Engineering Corps,
Army, Commandos, Signals, and Transportation
as well as for Air Force and Navy.
Available now the 2 ton and 4 ton motorized
GRIPHOIST TU-28H and TU- 32H with
electrohydraulic and pneumatic drives. Also our
GRIPWINCH unit for material handling with
faster speed, unlimited travel, 1000 - 2000 lbs.
capacity. Ask for detailed brochures.
**according to OSHA regulations
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
NOTES
10
10- 28
Hoists
WWW.HANESSUPPLY.COM
NOTES
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Hoists
10
10-29
WWW.HANESSUPPLY.COM