Samsung MAX-ZB550 Instruction manual

THREE-CD CHANGER
MINI-COMPACT SYSTEM
MP3-CD/CD-R/RW PLAYBACK
MAX-ZB550
Instruction Manual
Downloaded From Disc-Player.com Samsung Manuals
Safety Warnings
GB
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Wiring the Main Power Supply Plug(UK Only)
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin
face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same
colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you
should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the
plug to a main socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the main lead are coloured in accordance with the following code:–
BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN
AND YELLOW.
Downloaded From Disc-Player.com Samsung Manuals
Thank you for buying this
SAMSUNG mini-compact system.
Contents
Please take time to read these instructions.
They will allow you to operate your
system with ease and take full advantage
of its features.
SAFETY WARNINGS .................................................................................................................................................................................. 2
INSTALLING YOUR MINI-COMPACT SYSTEM
Front Panel View ...................................................................................................................................................................................... 4
Display Windowl ...................................................................................................................................................................................... 5
Rear Panel View ...................................................................................................................................................................................... 6
Remote Control ........................................................................................................................................................................................ 6
Where to Install Your Mini-Compact System............................................................................................................................................ 7
Connecting your System to the Power Supply ........................................................................................................................................ 7
Inserting Remote Control Batteries .......................................................................................................................................................... 7
Connecting to an External Source .......................................................................................................................................................... 8
CD Digital Out Jack .................................................................................................................................................................................. 8
Connecting the Loudspeakers ................................................................................................................................................................ 8
Connecting the AM (MW)/LW Aerial ........................................................................................................................................................ 9
Connecting the FM Aerial ........................................................................................................................................................................ 9
Demo/Dimmer function ............................................................................................................................................................................ 10
Setting the Clock ...................................................................................................................................................................................... 10
CD/MP3-CD-PLAYER
Loading and Changing Compact Discs.................................................................................................................................................... 11
To reply the CD/MP3-CD ........................................................................................................................................................................ 11
Selecting a CD in the Disc changer ........................................................................................................................................................ 12
Selecting a CD Track .............................................................................................................................................................................. 12
To select the MP3-CD title and track ...................................................................................................................................................... 12
Searching for a Specific Music Passage on a CD .................................................................................................................................. 13
Shuffle Play Function .............................................................................................................................................................................. 13
Function to skip through 10 track at a time ............................................................................................................................................ 14
Last Memory Function ............................................................................................................................................................................ 14
Repeating One or All Tracks on the Compact Discs................................................................................................................................ 15
Programming the Order of CD Playback ................................................................................................................................................ 15
Checking or Changing Programmed CD Tracks...................................................................................................................................... 16
TUNER
Searching for and Storing the Radio Stations ........................................................................................................................................ 16
Selecting a Stored Station........................................................................................................................................................................ 17
Improving Radio Reception...................................................................................................................................................................... 17
About RDS broadcasting.......................................................................................................................................................................... 18
About RDS DISPLAY function.................................................................................................................................................................. 18
PTY (Program Type) indication and PTY-SEARCH function .................................................................................................................. 19
TAPE DECK
Listening to a Cassette ............................................................................................................................................................................ 20
CD Synchro Record Feature.................................................................................................................................................................... 20
Recording a Compact Disc ...................................................................................................................................................................... 20
Recording a Radio Program .................................................................................................................................................................... 21
Copying a Cassette (Dubbing) ................................................................................................................................................................ 21
Selecting the Cassette Playback Mode (Deck 2 Only) ............................................................................................................................ 21
Tape Counter............................................................................................................................................................................................ 21
OTHER FUNCTIONS
Timer Function ........................................................................................................................................................................................ 22
Cancelling the Timer ................................................................................................................................................................................ 22
Mute Function .......................................................................................................................................................................................... 23
Selecting Sound Mode ............................................................................................................................................................................ 23
Power Surround Function ........................................................................................................................................................................ 23
Setting the System to Switch off Automatically ........................................................................................................................................ 24
Super Bass Level .................................................................................................................................................................................... 24
Connecting Headphones.......................................................................................................................................................................... 24
RECOMMENDATIONS FOR USE
Safety Precautions .................................................................................................................................................................................. 25
Cleaning Your Mini-Compact System ...................................................................................................................................................... 25
Precautions When Using Compact Discs ................................................................................................................................................ 26
Precautions When Using Audio Cassettes .............................................................................................................................................. 26
Before Contacting the After-Sales Service .............................................................................................................................................. 26
Technical Specifications .......................................................................................................................................................................... 27
Symbols
Downloaded From Disc-Player.com Samsung Manuals
Press
Push
Important
Note
GB
Front Panel View
GB
31 30 29 28 27
26
1
2
3
4
25
24
23
22
5
21
6
20
7
19
18
17
16
8
9 10 11 12 13 14 15
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Display Window
Display(RDS)
PTY(RDS)
Timer / Clock
Function Selection buttons
Standby / On
Demo/Dimmer
Cassette Deck 1
REC / Pause
Memory
Mono/ST
Search Function buttons/
Tuning Mode / Stop button
13. CD Synchro Recording
14. Program / MP3-CD last memory
15. CD Repeat
Downloaded From Disc-Player.com Samsung Manuals
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
Cassette Deck 2
Headphone Jack Connector
Enter
Sound Mode
Multi Jog / MP3-CD Album Searching
S.BASS Level
Volume
Power Surround
Open/Close
Disc Change
Disc Selection buttons
Deck 1/2
Counter Reset
Reverse Mode
TAPE Normal Speed Dubbing
Compact Disc Compartment
Display Window
GB
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Power Surround
Sound Mode
Volume and EQ Level
CD Program and Tuner Preset Number
Title
Main Display (Function, Frequency, Time, etc.)
FM Mode (STEREO)
EQ
D.S.P
CD-RW
Tape Reverse Mode
CD Synchro Recording
Tuner Frequency unit
AI SLEEP or SLEEP
CD Playing Disc Mode or CD Repeat Mode
MP3-CD
Clock
Playing Disc Number
Recording
Tape 1/2
Tuning Mode (Auto)
FM RDS Mode
CD Program or Tuner Memory to Program
Tuner Preset
TUNED
Super BASS
Downloaded From Disc-Player.com Samsung Manuals
Rear Panel View
GB
1. FM Aerial Connector Terminal
2. AM Aerial Connector Terminal
1
3. CD Digital out Jack
4. Loudspeaker Connector Terminals
2
5. AUX-Input
3
4
5
Remote Control
1
2
3
4
5
6
7
8
9
25
24
23
22
21
20
19
18
17
16
15
14
10
11
Downloaded From Disc-Player.com Samsung Manuals
13
12
1. Standby / On
2. Sound Mode
3. TAPE Fast-Forward/ Rewind
4. Deck 1/2
5. Reverse Mode
6. CD Repeat
7. CD Stop
8. Program/Set/MP3-CD last memory
9. CD Track or Radio Station Search
10. Tuning Mode/MP3-CD Album
Track Mode
11. FM Mono/Stereo
12. Volume Decrease
13. Tuner Band
14. Volume Increase
15. Disc Skip
16. CD Play/Pause
17. CD Shuffle PLAY/MP3-CD Random Play
18. +10 Button
19. AI Sleep
20. TAPE Stop
21. TAPE Play
22. Super Bass Level
23. AUX
24. Timer On/Off
25. Mute
Where to Install Your Mini-Compact System
Inserting Remote Control Batteries
GB
To take full advantage of your new mini-compact system, follow
these installation instructions before connecting the unit.
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 6 inches (15 cm) on the
sides and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the compact disc
compartment easily.
Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.
Insert or replace remote control batteries when you:
Purchase the mini-compact system
Find that the remote control is no longer operating correctly
When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.
1
Place your thumb on the position marked
on the battery
compartment cover (rear of the remote control) and push the cover in
the direction of the arrow.
2
Insert two AAA, LR03 or equivalent batteries, taking care to respect
the polarities:
+ on the battery against + in the battery compartment
– on the battery against – in the battery compartment
3
Replace the cover by sliding it back until it clicks into position.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Connecting your System to the
Power Supply
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check
the voltage.
1
Plug the main lead (marked AC Cord on the rear of the system) into
an appropriate socket.
2
Press the Standby/On button to switch your mini-compact system on.
Downloaded From Disc-Player.com Samsung Manuals
Connecting to an External Source
Connecting the Loudspeakers
The auxiliary input can be used to take advantage of the
sound quality of your mini-compact system when listening to
other sources.
Examples: A television
A video disc player
A Hi-Fi stereo video cassette recorder
The loudspeaker connector terminals are located on the rear
of the system.
GB
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
1
2
There are four terminals on the system:
Two for the left speaker (marked L)
Two for the right speaker (marked R)
To achieve the correct sound quality, connect the:
Red wire to the + terminals
Black wire to the – terminals
Set the system to standby mode and disconnect it and the external
source from the main.
1
To connect a wire to a terminal, push the tab as far as it will go:
To the right on the system
Connect the audio cable to the rear of the mini-compact system.
2
3
Insert the wire, up to the plastic sheathing, in the hole.
4
Repeat the operation for each wire.
Connect the...
To the connector marked...
Red jack
White jack
R (right)
L (left)
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the main socket and press Standby/On to
switch it on.
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
5
6
Switch the external source on.
Push the tab back:
To the left on the system, until it clicks into place
To the top on the loudspeaker
Result: The wire is pinched and held firmly in place.
Adjust the volume and balance as required:
Volume
Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
Directions in Installing Speaker
CD Digital Out Jack
This unit can output CD digital sound signals through this
jack. Use an optical cable to connect digital audio equipment.
(DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the CD DIGITAL OUT jack. Then,
connect an optical cable plug to the CD DIGITAL OUT jack.
(1)
When the CD DIGITAL OUT jack is not being used
Attach the supplied dust cap.
Downloaded From Disc-Player.com Samsung Manuals
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation
of the speaker.
Do not install on the wall or on a high place of pole or other
unstable place to prevent any safety accident caused by falling
of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.
Connecting the AM (MW)/LW Aerial
GB
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM aerial connector terminals are located on the rear of the system and are
marked AM .
To avoid noise interference, check that the loudspeaker wires do not run
close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
AM ANT.
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 16 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
Downloaded From Disc-Player.com Samsung Manuals
9
Demo/Dimmer function
Setting the Clock
GB
All functions available on the system can be viewed on the
display and the display's brightness can be switched between
"on" and "off".
1
Press the Demo/Dimmer button.
Result: All functions available on the system appear on the front
panel display.
Your system is equipped with a clock which allows you to
turn your system on and off automatically. You should set the
clock:
When you first purchase the mini-compact system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Each of these are explained in detail in this guide. Please refer to
the relevant section.
2
Press the Demo/Dimmer button again.
Result: The Dimmer function is selected and the display darkens.
Press the Demo/Dimmer button once again to brighten the front
panel display.
3
1
2
3
A display brightness control can only be performed while the
system power is on.
4
Switch the system on by pressing Standby/On.
Press Timer/Clock twice.
Result: CLOCK is displayed.
Press Enter.
Result: The hour flashes.
To...
Turn the Multi Jog knob to the...
Increase the hours
Decrease the hours
Right
Left
5
When the correct hour is displayed, press Enter.
Result: The minutes flash.
6
To...
Turn the Multi Jog knob to the...
Increase the minutes
Decrease the minutes
Right
Left
7
When the correct time is displayed, press Enter.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
You can also use Program/Set button on the remote control
to instead Enter button in step 3, 5, 7.
You can also use
/
buttons to instead Multi Jog
knob in step 4, 6.
2
3,5,7
1
4,6
Downloaded From Disc-Player.com Samsung Manuals
Loading and Changing Compact
Discs
To replay the CD/MP3-CD
GB
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
This is a player that enables the playback of audio CD, CD-R,
CD-RW and MP3-CD and does not possess the function that
saves MP3 files.
Never force the compact disc carrousel when opening and
closing the compartment.
Do not use CDs of irregular shapes like heart or octagon shapes.
The performance of the player may be degraded.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled “Precautions When Using Compact Discs” on
page 26 .
1
Switch the system on by pressing Standby/On.
2
Press the Open/Close( ) button on the front panel.
Result: The compartment opens.
3
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
4
If you wish to load a third compact disc, press the Disc Change
button on the front panel (or Disc Skip on the remote control).
Result: The carrousel rotates by 120°.
5
Close the compartment by pressing the Open/Close( ) button
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play...
1
2
3
4
Press the On/Standby button to switch on the power.
Press the CD(
) of the main unit to select the CD function.
Insert more than one CD or a MP3-CD.
Press the CD(
remote control.
) button of the main unit or the
button of the
If there is more than one CD or an MP3-CD inserted,
replays are then processed in order.
Your CD Player will take a few moments to scan through
all the tracks recorded on a particular MP3-CD.
The English name of the song may be indicated on the display
only if directly downloaded from the PC or if the purchased
MP3-CD is sorted according to titles(directory). (Other
languages besides English may not be indicated.)
The English name of the track may not be indicated
depending on the characteristics of the MP3-CD.
<CD Playback>
<During the MP3-CD playback>
Press...
Disc 1
CD (
) or Disc 1
Disc 2
Disc 2
Disc 3
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
At least more than one CD should be inserted for playbacks.
Playtime Indicator
5
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
6
5
2,5
If it is desired to stop while the playback is processing, press the
) button.
Press the CD(
7
Title(Directory) Indicator Playtime Indicator
Adjust the volume according to needs with the following procedures.
Turn the Volume control of the main unit.
or
Press the VOL. + or – button of the remote control.
CD(
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
4
Track Indicator
Track Indicator
) button once again to playback again.
To stop playback, press the
button.
A new disc may be inserted in the remaining two compartments excluding the CD which is being played back. Press the
Disc Changer button to open the CD tray. The revolving part
does not turn during playbacks.
If there is not even one CD inserted in the CD tray, it is
indicated as “NO DISC”.
If the CD Repeat function is not selected, 3 CDs are played
back which automatically stops.
5
5
1
2,4,6
1
7
Downloaded From Disc-Player.com Samsung Manuals
Selecting a CD in the Disc changer
To select the MP3-CD title and
track
GB
The CD function is automatically selected when Disc Skip is
pushed.
To select a specific disc, press the corresponding Disc (1, 2, 3) button
on the front panel or Disc Skip on the remote control, until the
required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
If you wish to play the current disc only, press CD Repeat on
the front panel one or more times, until 1 CD is displayed.
If you use the Disc (1, 2, 3) function when listening to the
radio or to a tape, the system switches automatically to the CD
mode.
If the disc selected is not loaded, the next disc is played
automatically.
The title and track of the MP3-CD desired to listen may be
selected on stopping or during playbacks.
Main Unit
To move the title(Album),
If ‘Title’ is selected,
Turn the Multi Jog Knob.
1
2
3
To move the track,
press the
button.
,
Moves the track within the title.
If the
button is pressed
,
more than the number of tracks
within the title, it moves to the next title.
Title Movement
Track Movement
Selecting a CD Track
You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the...
Turn the Multi Jog knob...
Next track
One notch to the right
Current track
One notch to the left
Previous track
Two notches to the left
Track of your choice
The appropriate number of
notches to the right or to the left
You can also use the
and
buttons on the front panel, or
the
and
buttons on the remote control to select a track.
Downloaded From Disc-Player.com Samsung Manuals
Remote Control
Press the Tune/CD Mode button, then select MP3-CD ‘Title’ or ‘Track’ and
press the
,
button.
If ‘Title’ is selected in the display, the title moves.
If ‘Track’ is selected in the display, the track moves.
Searching for a Specific Music
Passage on a CD
GB
When listening to a compact disc, you can quickly search for a
specific music passage on a track.
What is MP3?
MP3 means MPEG1 Layer 3, the global standard for audio
signal compression technology. It uses digital compression
technology to compress original sound data by up to 12 times
without sound quality degradation.
File Compatibility
The unit will playback files created in MP3 format
(Mpeg1.Layer3) with *.mp3 as their extension.
Files created in MP2 format (Mpeg1.Layer2) with
*.mp2 as their extension can also be played back.
It is recommended that you turn the volume down before using
this function.
To search through the tracks...
Press and hold down...
Forwards
for at least one second
Backwards
for at least one second
You can also press and hold down
ssearch through the tracks.
/
on the front panel to auto
How many MP3 files can a CD-R or CD-RW disc record?
The maximum capacity of one CD-R or CD-RW disc is
680MB.
Normally, one MP3 file has a capacity of 4MB, therefore
approximately 170 files can be recorded on a single disc.
Regarding the playback of CD-R/RW
In the case of an original CD-R(Recordable) recorded in
audio CD format, CD-RW(Rewitable) and editing by the
user, playback is processed on the respective
completed status. (The player may not be played back
according to the characteristics of the CD or recorded
status.)
The CD-RW is comparably less reflexive than CD which
causes more time delay to read.
Playback sequence of titles and tracks
In case of Window Explorer display.
The arrows indicates playback sequence of titles and
tracks.
Tracks with jpg, wav or doc only are not audio files and
therefore will be skipped.
(E) CD-ROM drive
Shuffle Play Function
You can listen to the tracks on a compact disc in a different
order each time, as the various tracks will be selected
automatically in a random sequence.
1
Press the Shuffle button.
Result: The SHUFFLE (CD)or RANDOM(MP3-CD) indication appears
and all the tracks are played in a random order. Both the track
number and the playing time are displayed.
2
When playing tracks in a random order, you can:
Move on to the next track (selected at random) by pressing
/
or turning Multi Jog one notch to the right
Search quickly for a specific point in the current track by pressing
/
or turning Multi Jog one notch to the left
3
When you have finished the random playback, press
Shuffle button again.
or press the
TITLE 01
Repeat and CD Synchro function are not available in Shuffle playing
mode.
Skipped
Kevin01.mp3
Kevin02.mp3
Kevin03.mp3
Kevin04.mp3
Kevin.jpg
Life.doc
TITLE 02
TITLE 04
Summer05.mp3
Summer06.mp3
Garden.mp3
Garden.mp3
TITLE 03
TITLE 05
Michael07.mp3
Michael08.mp3
3
Water.mp3
Water.mp3
2
Skipped
TITLE 06
Kenny01.wav
Kenny02.wav
Downloaded From Disc-Player.com Samsung Manuals
TITLE 07
Butterfly.mp3
Piano14.mp3
John15.mp3
1,3
2
Function to skip through 10
tracks at a time
GB
Last Memory Function
Press the +10 button briefly while playing back a
CD. The track 10 tracks after the current one will then
be played back.
Example: If you want to select track 43 during playback of track
15, press the +10 button three times, and then press
the
button three times.
15 ➝ 20 ➝ 30 ➝ 40 ➝ 41 ➝ 42 ➝ 43
+10
+10
+10
CD
Downloaded From Disc-Player.com Samsung Manuals
CD
CD
*This function is only available during playback of an MP3-CD.
When MP3-CD playback is selected again after your CD player has
been stopped or turned off, this function allows playback from the
start of the track that you last listened to.
Press the Program button on the main set or Program/Set button
on the remote control while your MP3-CD is being played back.
The LAST ON and OFF may be repeatedly selected.
Repeating One or All Tracks on the
Compact Discs
GB
7
8
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
1
To repeat...
The current track indefinitely
The selected disc
All discs loaded
2
Press CD Repeat on the Front
Panel one or more times until...
9
REPEAT 1 is displayed
REPEAT 1 CD is displayed
REPEAT ALL CD is displayed
To select other tracks, repeat Steps 4 to 6.
Press CD (
) to listen to the track selection in the order
programmed.
To...
Turn the Multi Jog knob...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
One notch to the left
Two notches to the left
One notch to the right
The appropriate number of
notches to the right or to the
left
When you wish to stop the Repeat function, press CD Repeat until ALL
CD or 1 CD is displayed, or press
10
.
To cancel the selection, press
.
Once if the compact disc player is stopped
Result: PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the
tracks in step 5, 9.
/
buttons to select the required
4
Programming the Order of CD Playback
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
8
5,9
1,10
1
2
3
If the CD function is selected, stop the player by pressing
.
Load the selected CDs.
Press Program.
Result: The following indications are displayed:
(01 = Program no., DI = Disc no., – – = Track no. on the disc)
4
If necessary, select the disc containing the required track by pressing
the corresponding Disc (1, 2, 3) button.
5
Select the required track by turning the Multi Jog knob:
To the left to move back through the tracks
To the right to move forward through the tracks
6
Press Program to confirm your selection.
Result: The selection is stored and
Downloaded From Disc-Player.com Samsung Manuals
is displayed.
3,6
Searching for and Storing the Radio
Stations
Checking or Changing Programmed
CD Tracks
GB
GB
You can check or change your selection of tracks at any time.
1
2
Press
You can store up to:
15 FM stations
8 MW stations
7 LW stations
once if you have started listening to the selection.
Press Program.
Result: The following indications are displayed:
1
2
3
Switch the system on by pressing Standby/On.
4
To search for a
station...
Press Tuning Mode
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
Manually
Press
Automatically
One or more times until MANUAL is
displayed.
One or more times until AUTO is
displayed.
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press Program.
3
Press Program again.
Result: The first track selected is displayed, together with the letter CH (Change).
4
5
6
7
8
Press Program one or more times until the track to be changed is displayed.
and
or turn Multi Jog to select a different track.
Select the TUNER function by pressing TUNER.
Select the required frequency band by pressing TUNER (Band)
again on the front panel or Tuner (Band) on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW
Long Wave
Press Program to confirm your change.
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
5
Select the station to be stored by:
Turning the Multi Jog knob to the right or to the left to increase or
decrease the frequency respectively
or
Pressing Tuning
or
on the remote control
To scroll through the frequencies faster when searching
manually, hold down the Tuning Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
5
6
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
7
Select the stereo or mono mode by pressing Mono/ST.
8
6
6
6
1
2,3,4,7
6
2,3
5
5
1
1
8
2,3,4,7
6
4
6
4
5
7
Downloaded From Disc-Player.com Samsung Manuals
5
5
Searching for and Storing the Radio
Stations (continued)
Selecting a Stored Station
GB
8
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Memory.
Result: The PRGM is displayed for a few seconds.
b Press Tuning Down and Up to assign a program number
between 1 and 15.
c Press Memory to store the radio station.
Result: PRGM is no longer flashed and the station is stored.
9
You can listen to a stored radio station as follows:
1
2
3
Select the TUNER function by pressing Tuner on remote control.
Select the required frequency band by pressing Tuner (Band) on the
remote control or TUNER (Band) again on the front panel.
4
Press the Tuning Mode button on the front panel of the unit, or the
Tune CD/Mode button on the remote control until “PRESET” is
displayed.
5
Turning Multi jog on the front panel left or right until the desired
station is found or press
/
to select the desired station.
or
Select the desired station by pressing the station number stored,
using the Tuning
or
button on the remote control.
Result: The desired station is now received.
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
You can also use Program/Set button on the remote control
to instead Memory button in step 8.
Switch the system on by pressing Standby/On.
1
8
8
8
5
4
5
2,3
In Tuner mode
Improving Radio Reception
In manual tuning mode, you can use Multi Jog or
/
button to manual search a radio station.
During Tuner auto searching, press
button to stop auto
searching.
In Preset tuning mode, you can use Multi Jog or
button to search a stored radio station.
/
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
Downloaded From Disc-Player.com Samsung Manuals
About RDS broadcasting
About RDS DISPLAY function
GB
This unit has the RDS (Radio Data System) function, which
enables for the various information such as broadcasting
station, radio text, time and 30 types of programs (News,
Rock, Classic, etc.) to be received from the FM RDS station
together with normal radio signal.
1
2
3
Press the Standby/On button.
Receive the FM radio.
See the radio receiving method on the page 16.
FM and frequency are shown on the display
If the received station transfers the RDS information, 'RDS'
appears automatically on the display.
About "PS NAME" MODE
Displays the name of broadcasting station.
Press the RDS Display button to select the PS NAME.
"PS NAME" appears on the display.
If the PS information is being received, the PS name (BBC, AFO,
NDR, etc.) is shown on the display.
If the PS information isn't received, the original FM frequency is
shown.
Even though no RDS Display button is pressed, the reception
of PS information ensues the PS name is displayed.
Press the RDS Display button to select the desired RDS mode.
Whenever the button is pressed, RDS mode changes as follows.
PS NAME
RT
CT
Current FM frequency
The RDS function is available only in FM broadcasting.
Description on RDS function
1. PTY (Program Type) : Displays the type of programme
currently being broadcast
About 'RT' MODE
Displays the character transmitted from the broadcasting station.
2. PS NAME (Program Service Name) : Indicates the name of
broadcasting station and is composed of 8 characters.
3. RT (Radio Text) : Decodes the text broadcast by a station (if
any) and is composed of maximum 64 characters.
4. CT (Clock Time) : Decodes the real time clock from the FM frequency.
Some stations may not transmit PTY, RT or CT information
therefore this may not be displayed in all cases.
Press the RDS Display button to select the RT MODE.
"RT" appears on the display.
If the RT information is being received, the received information is
shown on the display.
If the RT information isn't received, the "NO RT" is shown.
On the display.
5. TA (Traffic Announcement) : When this symbol flashes it
shows that the traffic announcement is in progress.
About CT(Clock Time)
1
3
Sets the time of RDS clock.
To select the CT time, set the RDS Display button to CT MODE.
The CT information will take up to 2 minutes to be decoded therefore the clock isn’t displayed immediately.
If there is no received CT information, "NO CT" is displayed.
Downloaded From Disc-Player.com Samsung Manuals
PTY (Program Type) indication and
PTY-SEARCH function
GB
The PTY information is composed of an identification symbol,
which helps the FM radio to recognize the program type of each FM
station.
The 30 PTY modes are shown in the display by pressing the PTY
button.
Program Type
Display
NEWS
• News including an announced opinion and report
AFFAIRS
• Several matters including a current incident, documentary,
discussion and analysis.
INFO
• Information including weights and measures, returns and forecast, matters interesting the customer, medical information, etc.
SPORT
• Sports
EDUCATE
• Education
DRAMA
• Drama-Radio serial, etc.
CULTURE
• Culture-National or local culture including the religious problem,
social science, language, theater,etc.
SCIENCE
• Natural science and technology
VARIED
• Others-Speech, amusing program (quiz, game), interview,
comedy and satirical play, etc.
POP M
• Pop music
ROCK M
• Rock music
M.O.R.M
• M.O.R- Comfortable music, occasionally vocal or piece
LIGHT M
• Light classical music- Classical music and instrumental
and chorus music
CLASSIC
• Heavy classical music-Orchestra music, symphony, chamber
music and opera
OTHER M
• Other music - Jazz, R&B country music
WEATHER
• Weather
FINANCE
• Finance
CHILDREN
• Children’s programmes
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATIONAL M
OLDIES
FOLK M
DOCUMENT
TEST
• Social affairs
• Religion
• Phone in
• Travel
• Leisure
• Jazz Music
• Country Music
• National Music
• Oldies Music
• Folk Music
• Documentary
• Alarm Test
Downloaded From Disc-Player.com Samsung Manuals
About PTY-SEARCH
1
Tuned to an FM station broadcasting a PTY MODE.
See the FM receiving method on the page 16.
If the received station is transmitting the RDS information, "RDS"
lights up.
2
Press the PTY button.
The PTY MODE(NEWS, AFFAIRS, etc) appears on the display.
Press the Tuning Down or Up button to select the desired PTY
MODE.
If the station is transmitting no PTY information, 'NO PTY' shows
on the display.
When the PTY MODE is selected(The PTY MODE is shown in the
display), press the PTY KEY once again to convert into
PTY-SEARCH MODE and auto-search the station sequentially.
If a station is found broadcasting required PTY MODE then the
search station and the stop is selected.
If the PTY MODE isn’t found it is retuned to the original station
frequency at beginning the PTY SEARCH and auto-search and
PTY SEARCH are suspended.
2
2
Listening to a Cassette
CD Synchro Record Feature
GB
Always treat your cassettes with care; refer, if necessary, to
the section entitled “Precautions When Using Audio Cassettes”
on page 26.
1
2
3
Switch the system on by pressing the Standby/On button.
Select the TAPE function by pressing TAPE on the front panel.
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where PUSH EJECT ( ) is written.
4
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
5
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
6
If you have inserted two cassettes, press Deck 1/2 on the front panel
or directly the Deck 1/2 button on the remote control to select the
cassette to be played.
You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
2
3
4
5
6
Switch the system on by pressing Standby/On.
7
To stop recording, press
Insert a blank cassette in Deck 2.
Select the CD function by pressing CD on the front panel.
Load a compact disc.
Select the required disc.
Select the required track and press CD Synchro or press CD Synchro directly to start recording at the beginning of the disc.
Result: REC is displayed and recording starts.
.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
7
8
To listen to...
Press ...
Side A
TAPE (
) once
Side B
TAPE (
) twice
Result: The cassette starts playing.
3
DECK 1 and DECK 2
DECK 2 only
7
1
When the cassette is stopped, select one of the following functions
as required or on the remote control.
6
Main Unit
To...
Rewind the cassette
Fast-forward the cassette
Press...
Recording a Compact Disc
The direct recording mode enables you to start recording with
any track on the compact disc.
Remote Control
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
To...
Rewind the cassette
Fast-forward the cassette
Press ...
1
2
3
4
5
6
7
8
6
2,7
9
1
8
8
Switch your system on by pressing Standby/On.
Insert a blank cassette in Deck 2.
Select the CD function by pressing CD on the front panel.
Load the compact disc.
Select the required disc.
Select the required track on the compact disc and press
on the front
panel or
on the remote control to set the compact disc player to Pause
mode.
Press the REC/Pause.
Result: REC is displayed.
Press the
to start playing the track.
Result: The track is recorded on the cassette.
To stop recording, press
3,6,8
1
Downloaded From Disc-Player.com Samsung Manuals
.
7
9
Recording a Radio Program
Selecting the Cassette Playback
Mode (Deck 2 Only)
GB
You can record a radio program of your choice.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on
the recording.
Your mini-compact system has three cassette playback modes
which enable you to listen to both sides of a cassette
automatically.
Press REV.Mode until the appropriate symbol is displayed.
When the display indicates... The mini-compact system plays back...
1
2
3
4
Switch the system on by pressing Standby/On.
Insert a blank cassette in Deck 2.
One side of the selected cassette and
then stops.
Select the TUNER function by pressing TUNER.
Select the radio station that you wish to record by pressing Tuning
One side of the cassette.
The other side of the cassette and then
stops.
or
on the remote control or by press the Tuning Down or
Up on the front panel.
Both sides of the cassette indefinitely until
you press stop.
5
Press REC/Pause.
Result: REC is displayed in red and recording starts.
6
To stop recording, press
.
3
5
6
1
4
4
Copying a Cassette (Dubbing)
You can copy a cassette from Deck 1 to Deck 2. Two options
are available:
Normal speed dubbing
You do not need to adjust the volume, as it has no effect on the
recording.
Take care not to insert the tape to be copied in Deck 2, as it will
be erased when you start recording.
1
2
3
4
Switch your system on by pressing Standby/On.
Insert a blank cassette in Deck 2.
When playing a cassette in one of the cassette decks, a
counter is displayed to enable you to take note of the counter
value at the start of each track to start playback at the
beginning of the track to which you wish to listen.
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing Counter Reset .
Insert the tape to be copied in Deck 1.
To copy a cassette at...
Press...
Normal speed
Dubbing
Result: The appropriate indications are displayed and the cassette in
Deck 1 is copied to the cassette in Deck 2.
5
Tape Counter
To stop dubbing, press
.
4
1
5
Downloaded From Disc-Player.com Samsung Manuals
Each cassette deck has a separate counter.
Timer Function
GB
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If the timer switch on and off times are identical, the word ERROR is
displayed.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
2
3
4
5
2
Switch the system on by pressing Standby/On.
Press Timer/Clock until
1,9
TIMER is displayed.
4,5,7
6
6
Press Enter.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Enter.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d Press Enter.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Enter.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d Press Enter.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
3,4,5,6,7,8
To set the timer function
You may use Multi Jog or
/
buttons to adjust in step 4,
5, 6, 7.
You can also use Program/Set button on the remote control to
instead Enter button in step 3, 4, 5, 6, 7, 8.
Cancelling the Timer
6
Press Tuning Down and Up to adjust the volume level and press
Enter.
Result: The source to be selected is displayed.
7
Turn the Multi Jog knob to select the source to be played when the
system switches on.
You can stop the timer at any time (system on or in standby mode).
If you select...
You must also...
To...
Press Timer-On/Off...
TAPE (cassette)
Insert a recorded cassette in one of
the decks before setting the
system to standby.
Cancel the timer
Once.
Result:
is no longer displayed.
Restart the timer
Twice.
Result:
is displayed again.
8
9
TUNER (radio)
a Press Enter.
b Select a preset station by tuning
the Multi Jog knob to the right or
to the left.
CD (compact disc)
Load one or more compact discs.
Press Enter to confirm the timer.
Press Standby/On to set the system to standby mode.
is displayed to the bottom left of the time, indicating that
Result:
the timer has been set. The system will switch on and off
automatically at the required times.
Downloaded From Disc-Player.com Samsung Manuals
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
Mute Function
Power Surround Function
GB
You can turn the sound off temporarily on your system.
Example: You wish to answer a telephone call.
1
2
Press Mute.
To switch the sound back on (at the same volume as before), press
Mute again or the Volume buttons.
Your mini-compact system is equipped with the function
of Power Surround.
The Power Surround replaces conventional stereo sound
with a wider and more true-to-life sound. It creates the
feeling of being right at the centre of the music and being
surrounded by total music sound.
Press P. Surround button on the front panel until the
required option is selected. Each time the P. Surround
button is pressed, “P,SURR, ” is selected or cancelled in this
order.
Selecting Sound Mode
Your mini-compact system is equipped with a preset equalizer
that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to.
This model provides D.S.P modes so that you can enjoy
virtually original sound.
Turn Sound Mode on the front panel or Press Sound Mode on the remote
control until the required option is selected.
To obtain a...
Select...
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for classic music
Balance suitable for hall
Balance suitable for live
Balance suitable for cinema
PASS
POP
ROCK
CLASSIC
HALL
LIVE
CINEMA
Downloaded From Disc-Player.com Samsung Manuals
Setting the System to Switch off
Automatically
Connecting Headphones
GB
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
1
Press AI Sleep.
Result: playback starts and the following indications are displayed:
2
Press AI Sleep one or more times to indicate how long the
system should continue playing before it switches off:
90 MIN
At any time, you can:
Check the remaining time by pressing AI Sleep
Change the remaining time by repeating Steps 1 and 2
3
Press AI Sleep one or more times until AI SLEEP is displayed.
Result: The system will automatically switch off at the end of the disc
or cassette.
4
To cancel SLEEP or AI OFF function, press AI Sleep one or more
times until OFF is display.
Super Bass Level
Your mini-compact system has a bass amplification function
called S.Bass (Super Bass Sound). This function makes the
sound more powerful and real.
1
Turn S.Bass Level knob on the front panel or press the S.BASS Level
button on the remote control.
Press the button on the remote control repeatedly to select
➞“OFF ➞ S, BASS1 ➞ S, BASS 2 ➞ S, BASS3 ➞ S, BASS4”.
or turn the knob on the front panel repeatedly to select
“OFF ↔ S, BASS1↔ S, BASS 2 ↔ S, BASS3↔S, BASS4”.
2
You can select the level of low tones you desired.
Downloaded From Disc-Player.com Samsung Manuals
You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The earphones
must have a 3.5 mm jack or an appropriate adapter.
Connect the headphones to the Phones jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
Prolonged use of headphones at a high volume may damage
your hearing.
Cleaning Your Mini-Compact
System
Safety Precautions
GB
The following diagrams illustrate the precautions to be taken
when using or moving your mini-compact system.
To obtain the best possible results from your mini-compact
system, you must clean the following elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
Ambient operating conditions:
Ambient temperature
5°C-35°C
Humidity
10-75%
Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.
Compact Disc Player
1
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
2
Regularly clean the player with a special cleaning disc (available from
your local dealer).
Tape Decks
1
2
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to lightning could damage the unit.
Press Push Eject(
) to open the cassette deck.
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
3
VOLUME
UP
1
2
DOWN
Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.
Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment (fire
hazard) and can cause electric
shock.
Downloaded From Disc-Player.com Samsung Manuals
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
Do not remove any equipment panels.
The inside of the unit
contains live components, which
cause electric shock.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.
Precautions When Using Compact
Discs
Before Contacting the After-Sales
Service
Handle your compact discs with care. Always hold them by the
edges to avoid leaving fingerprints on the shiny surface.
When you have finished playing a compact disc, always put it back
in its case.
Do not fix paper or adhesive tape to the discs and do not write on
the label.
Clean them with a special-purpose cloth.
Store your compact discs in a clean place, out of direct sunlight,
where they will not be exposed to high temperatures.
Always use compact discs marked
.
It always takes a little time to become familiar with a new appliance. If you
have any of the problems listed below, try the solutions given. They may
save you the time and inconvenience of an unnecessary service call.
GB
Problem
Checks/Explanation
The system does not work
• The main lead is not correctly plugged into
a wall socket or the wall socket is not
switched on.
• The remote control batteries need replacing
or the polarity has not been respected.
• The Standby/On button has not been
pressed.
There is no sound
• The volume has been completely turned
down.
• The correct function (TUNER, CD, TAPE,
AUX) has not been selected.
• You have connected a set of earphones.
• The loudspeaker wires have been
disconnected.
• The MUTE button has been pressed.
The Timer does not work
• The timer has been stopped by pressing
Timer On/Off.
Precautions When Using Audio
Cassettes
In case it does not work, even the
action is taken as above.
• Press the P. Surround button for 5 seconds
in power ‘OFF’(standby), then it is returned
the original position (RESET)
Check that the tape in the cassette is sufficiently taught.
To prevent erasing a cassette that you wish to keep, remove the
safety tab on the upper edge of the cassette. To record a cassette,
where the tab has been broken, simply cover the opening with
adhesive tape.
When you have finished playing a cassette, always put it back in its
case.
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they place unnecessary strain
on the tape mechanism.
The compact disc player does not
start playing
COMPACT
DIGITAL AUDIO
G
E
N
E
R
A
L
C
D
C
A
S
S
E
T
T
E
S
R
A
D
I
O
The tape does not start playing
• The CD function has not been selected.
• The disc has been inserted face down or is
either dirty or scratched.
• The laser sensor is dirty or dusty.
• The system has not been installed on a flat,
horizontal surface.
• Condensation has formed in the player;
leave the system in a warm, airy room for at
least one hour.
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Reception is poor or no radio stations are received at all
• The TUNER function has not been selected.
• The radio frequency has not been correctly
selected.
• The aerial has been disconnected or is not
facing the right way. Turn it until you find the
best orientation.
• You are in a building that blocks radio
waves; you must use an outside aerial.
If the above guidelines do not allow you to solve the problem, take a
note of:
The model and serial numbers, normally printed on the rear of
the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG after-sales service.
Downloaded From Disc-Player.com Samsung Manuals
Technical Specifications
GB
SAMSUNG strives to improve its products at all times. Both the design specifications and these user
instructions are thus subject to change without notice.
RADIO
LW
Tuning range
Usable sensitivity
144 - 290 KHz
60 dB
AM (MW)
Tuning range
522 - 1611 KHz
Signal/noise ratio
40 dB
Usable sensitivity
54 dB
Total harmonic distortion
2%
FM
Tuning range
87.5 - 108 MHz
Signal/noise ratio
60 dB
Usable sensitivity
10 dB
Total harmonic distortion
0.5 %
COMPACT DISC PLAYER
Capacity
3 discs
Frequency range
20 Hz - 20 KHz (± 1 dB)
Signal/noise ratio
85 dB (at 1 KHz) with filter
Distortion
0.1 % (at 1 KHz)
Channel separation
70 dB
Disc sizes
Diameter: 120 or 80 mm. Thickness: 1.2 mm
TAPE DECK
Frequency range
125 Hz ~ 10 KHz
Signal/noise ratio
40 dB
Channel separation
35 dB
Erasing effect
60 dB
AMPLIFIER
Output power (6 Ω)
2 x 50 Watts RMS,IEC (total harmonic distortion: 10 %)
Channel separation
50 dB
Signal/noise ratio
75 dB
GENERAL
Dimensions
Downloaded From Disc-Player.com Samsung Manuals
270 (W) x 332 (H) x 443 (D) mm
THIS APPLIANCE IS MANUFACTURED BY:
ELECTRONICS
Downloaded From Disc-Player.com Samsung Manuals
AH68-01058B