Whirlpool Easy-Yo-Use Automatic Washer User guide

Welcome to the Whirlpool family
Welcome To Whirlpool Family
1
Dear Homemaker,
Know your Fully Automatic
2
Installing your Fully Automatic Washing Machine
3
Washing Process
5
Understanding the control panel
6
Simple tips for trouble free performance
9
Congratulations on bringing home the new Whirlpool Whitemagic Washing
Machine. We would like to welcome you to the global fraternity of Whirlpool
homemakers who believe in giving their families nothing but the best.
You would be proud to know that Whirlpool is the largest home appliance
company in the world and that a Whirlpool appliance finds a new home in some part of
the world, every two seconds.This has been possible because homemakers like you
choose Whirlpool and reinforce our belief in Innovation, Operational and Customer
Excellence. Whitemagic Washing Machines are elegantly styled and convenient to use.
They promise you premium quality and fill your life with the magic of Whirlpool.To get the
best out of your Whitemagic Washing Machine , use this simple and easy to understand
guide and follow the instructions.We would love to assist you with your queries and
suggestions at the Whirlpool Home Care Centre number mentioned in this user guide or
Easy troubleshooting that keeps you in control
10
Safety Precautions and Maintenance suggestions
11
Program Timing
12
at www.whirlpool.com.ph.
Wiring Diagram
13
We wish you years of joyful homemaking with your Whirlpool Whitemagic
Washing Machine and look forward to having a great relationship with you.
Service at your door step
14
Specifications
16
Yours Sincerely
Whirlpool Corporation
1
Know your Fully Automatic
Installing your Fully
Automatic Washing Machine
Installing Electrical Connections
Ensure the earth connection in your electrical supply is proper before connecting the power cord. The
socket should be standard and independent of pin type of 220V AC, 60Hz.A connection with separate line
fuse or circuit breaker of the value of 6A.
Top
Lid Assembly
WARNING
Tub Ring
Caution:
• Do not use extension junction box since it may not be properly earthed.
• The appliance must be earthed. The producer declines any responsibility
for damage caused by failure to observe this rule. You are therefore
advised to check that your household supply has an efficient earth.
Balance Ring
Basket
User Interface
Cabinet
Electrical Shock Hazard
•
•
•
•
Do not remove ground point.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire or electrical
shock.
Installing the Machine:
• Do not place on slanting, uneven, unstable surfaces.
WARNING
• Place on a solid leveled surface to avoid excessive vibration during
Personal Injury Hazard
• Use two or more people to move
operation.
and install the Washing
machine.
• Keep the machine at least 10cm away from the wall on all sides.
• Failure to do so can injure back
or other body parts.
• Place the drain hose flat on the floor before operating the machine.
• Carpet must not obstruct the opening in the base.
• Washing machine should be connected always to socket.
• If the supply cord is damaged it must be replaced by the manufacturer, its service or similarly qualified
persons in order to avoid a hazard.
• Discard the cushion balance ring assy cover.
• Ensure the assembly of rat mesh at the time of installation.
Under base
Note:
• Installation shall be done only by authorized service engineer.
• Parts removed during installation shall be properly disposed like screws, inlet valve plug.
Foot
WASH SYSTEM
2
3
Washing Process
Fill Hose Connection
1. Preparation for Washing :
a. Connect the fill hose to a water tap and turn the tap on.
b. Unhook the drain hose and lay it flat on the floor
c. Plug the power cord into the electrical socket properly.
The fill hose connection will be demonstrated by the technician when he comes to install your washing
machine. However, the steps for the connections are given below for your reference.
Fill Hose
To be connected
to the water tap.
2.
Loading the machine:
• Separate whites from colored clothes, and lint givers ( e.g. towels) from lint takers( e.g. corduroy, synthetic fabrics,
black color garments etc).
• Do not stuff the clothes or wrap them around the Agipeller – drop them loosely and evenly.
• The clothes should be able to move freely in the water for best results.
3.
Setting the water level:
•Set the water level by selecting in the control panel to the desired level based on wash load.
4.
Detergent.
• Open the lid assy and put the detergent in the dispenser.
STEP 1
Locate the Tap end of the Fill hose to the Tap and
gently screw it with the Tap.
The Fill Hose connector consists of 2 Ends:
A- The Tap End
STEP 2
Fit the other end of the fill hose provided to the machine inlet.
B- The Machine End
Note:
1. In case you have a very low water pressure i.e. if it takes more than 12 minutes to fill water to the ‘ high
level’, scatter the detergent evenly on the clothes around the Agitator/ Agipeller instead of using the detergent
dispenser.
2.Some detergents must be fully dissolved before putting into the dispenser to get the best wash performance.
Check instructions on the detergent pack .Pre dissolving detergent in warm water when washing in cold water
can improve its performance.
3.If too much detergent is used or cold water is used ,it doesn’t dissolve completely and remain on the garments,
hose or spin basket, causing contamination on clothes
4. Use only mild liquid detergent specially recommended for woollen fabrics.
5.
Power button:
Press the Power button to switch On or Off the machine.
6.
Programming the machine:
7.
Program the machine for the washing process as explained earlier. Press ‘Start ‘ to begin the wash process
End of the Wash Process:
To Machine
Use the adaptor only on circular cross section of taps.
Do not use on elliptical or hexagonal mouth taps since
the thread will not grip the tap properly.
The machine chimes to indicate the end of the wash process. If the clothes are not removed for up to 15 mins,
How to detach Fill Hose:
A. Close the Water Tap
after the end of the wash, the machine chimes again to remind you to do so. There is a second reminder
after another 15 mins
B. Unscrew the Fill Hose.
Note:
* Ensure the cloth load is immersed well below the Balance Ring assy, also ensure small clothes are loaded in the middle of
the basket to avoid falling out of clothes when dry sensing (Load Detection) is in operation.
* In case you want to add clothes after the 6th sense water level selection ensure the water level above the cloth by pressing the
pause button and select the desired water level and press start to continue wash
4
5
Understanding the
Control Panel
Wash option
•
STEP 1
STEP 3
Start/Pause
•
•
•
•
Press ‘Start’ button to begin the washing process.
Pressing this button while the washing is on, causing the machine to ‘Pause’. You
can now add more clothes can also change the selected option,if desired
STEP 2
Select the wash program (After you
have switched on the machine)
Ÿ
Select the required program.
‘Normal’ for regular wash.
Ÿ
‘Speedy’ for lightly soiled
Ÿ
clothes.
‘Wool’ for delicate
Ÿ
fabric/garments with embroidery
( Recommended maximum 2 kg
load).’
‘Heavy’ for very dirty or very
Ÿ
large/heavy clothes.
‘Stain Wash’ for stained clothes
Ÿ
Select ‘Aqua Store’ to pre
Ÿ
program the washer to fill and
store water if the water supply is
erratic.
Water Level
Ÿ
Manually select the water level
based on your wash loads.
Always ensure that wash load is
Ÿ
submerged well in the water
Special Cycle
=
=
=
6
•
Press the button again to restart.
If you wish to soak the clothes before washing select ‘
Soak’.
Select ‘Aqua Save’ to prevent the water from draining
automatically at the end of Wash/Rinse. So that you can
reuse the water for second round of wash load. Also if
you may wish to remove clothes without spinning ,this
feature is useful
You can Select ‘Wash’, ‘Rinse’& ‘spin’ as desired, if you
want one or more of these functions and not the whole
cycle.
Select ‘Extra Rinse’ for an
additional rinse when washing
heavy/very dirty or baby clothes.
Select ‘Low Spin’ for drying
delicate clothes.
Select ‘Tub Clean’ for removing the
muck accumulated in the tub
7
Auto Restart
In the event of power cut, the
machine will automatically start its
function where it left off, when
power is resumed.
How to get the best
out of your Washing Machine
Cleaning the Machine
After each wash, wipe the body of the washing machine with a soft cloth. If it is still dirty,
wipe with a cloth soaked in a solution of water detergent.
WARNING
Explosion Hazard
•
•
DetergentDispenser:
• Pull out the tray fully and lift it upwards to remove the detergent holder.
• Clean the dispenser housing & drawer with water if you find any traces of detergent in it.
• Reassemble the tray and push it back to its position (Flush with top).
Bleach Dispenser
• Flush the dispenser clean with water after every use.
Simple Tips
For Trouble Free Performance
Use non-flammable cleaners.
Failure to do so can result in
explosion or fire.
Foreign object entrapment
Please ensure that you empty all pockets of objects such as coins, pens, toothpicks, match
sticks etc. They may stuck inside the machine and could even cause damage to your
clothes.
Metallic buckles / zippers
All metallic buckles/zippers must be closed putting clothes into the washing machine. Open
buckles/zippers could damage/ scratch inner plastic parts and may even damage clothes.
Lint
Separate whites from colored clothes when washing. Always ensure that ‘lint – giving’
clothes (e.g. towels) are separated from ‘lint – takers’ (e.g. Synthetic fibers, black color
garments). Make
Sure that you dose the recommended amount of detergent for each wash load.
Lint Filter
•
Loose lint is captured in a unique comb structure which is placed
under the basket
Water Inlet
• Over the period of time, impurities in the water reduces the water
inflow to a trickle, which in turn clogs the inlet and slows down the
overall wash process.
• Unscrew fill hose from machine
• Gently pull out filter
• Wash directly under tap.
• Fit back filter and fill hose.
Tangling
Do not stuff clothes or wrap them around the Agitator/Impeller/ Agipeller.. Drop them
loosely around the Agitator/Impeller/ Agipeller.
Electrical
Kindly ensure that the household electrical wiring and earthing is proper, Plug point must be
intact.
Rodents/Insects
Protect your machine from Rodents/Insects. Rat bites can damage the wiring leading to
short circuits or general non – functioning of the machine . We recommend a WOIL rat
mesh
Following these simple trouble shooting tips can help you avoid a visit
by our technician and also help you save Rs.100/- the charge for one visit
Filter shall be properly assembled back to the machine after cleaning
8
9
Safety
precautions and Maintenance suggestions
Easy Trouble
Shooting that keeps you in control
Error type
LE - Lid Open during
wash, Rinse and Spin
dE - Long drain
(Pressure sensor not
detecting the Reset
level even after 4
minutes of drain)
FE - Long Fill
E1- Frequency output
from the Pr. Sensor
out of Range
tSC - Key short circuit
error
Beeper timings
Beep 1.5 s – Off 5 s
This sequence to be
repeated until the lid
is closed.
500 ms on – 500 ms
off
Above sequence
repeated every 5
Seconds interval
500 ms on – 500 ms
off
Above sequence
repeated every 5
seconds interval
500 ms on – 500 ms
off
Above sequence
repeated every 5
seconds interval
200 ms beep, 200
ms Off.
The sequence to be
repeated endlessly.
LED display
Cycle status LEDs should
start flashing at 1Hz rate.
Wash Option group LEDs
should flash at 2 Hz rate.
Water Level group LEDs
should flash at 2 Hz rate.
Program group LEDs
should flash at 2 Hz rate.
All LEDs to be turned Off.
•
Do not pull the cord to disconnect the plug. Hold the plug itself.
•
Do not use an adaptor or extension cord to plug in your washing machine.
•
Do not drag the washing machine to its position. Always lift
and move the machine keeping the wheel’s direction in
mind.
•
Do not move the washing machine if it contains the wash
load or water or when in operation.
WARNING
Electrical Shock Hazard
•
•
•
Do not remove ground point.
Do not use an adapter.
Do not use an extension cord. Failure to follow these
instructions can result in death, fire or electrical
shock.
•
Do not attempt to dismantle the washing machine.
•
Do not expose the machine to direct sunlight or rain*.
•
Do not install the machine in a damp area such as
bathroom, with exposure to direct shower, there is a danger of electric shock , fire , machine trouble,
corrosion and rusting
•
Do not spill water over the machine*. In case of spillage, wipe & dry.
•
Avoid the machine coming in contact with floor cleaning chemicals*.
•
Do not wash or spray water over switch or control panel.
•
To prevent deformation of plastic parts, do not use water with a temperature greater than 55 °C.
•
Do not allow children to play with the machine.
•
Do not wash shoes or utensils in the machine.
•
Do not put your hands in the rotating spin-basket till it stops completely.
•
Do not place heavy objects on the power cord.
•
Do not use caustic soda or bleach to clean the washing machine.
•
Make sure the lid is closed while washing or spinning.
•
Keep machine away from fire or heat.
•
WOIL will not be responsible if the user uses accessories not manufactured or recommended by WOIL
•
*Exposure can lead to rusting/corrosion.
WARNING
Electrical Shock Hazard
• Do not attempt to modify any part of this appliance.
• Do not connect this appliance to power sources other than specified.
• If the power cord is damaged, have it replaced by your Whirlpool
Service Centre.
10
11
Wire Diagram
Program Timing
( TIME IN MINUTES )
Sequence
Normal
Heavy
SPEEDY
Wool
All
All
Low
Levels
Levels
-
-
-
-
-
-
RED
YELLOW
BLACK
GREEN
GREY
BROWN
BLUE ORANGE
VIOLET
GREEN BLACK
BLUE
PROGRAM
CW
-
1
R
Y
B
GR
GY
BR
BO
V
GB
BL
2
B
1
3
R
Low
2
Xtra High Medium
3.0
5.0
4.0
Agitation
3.0
2.0
3.0
-
-
3.0
3.0
3.0
SCB
8
7
V
LCB
5
4
4
6
1
1
LC
2
2
Motor Capacitor
(MC)
SIS
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
Spin
2.0
2.0
2.0
2.0
0.5
2.0
2.0
2.0
-
-
-
-
-
-
-
-
Agitation
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
Untangle cycle
1.0
Fill
1.0
1.0
1.0
1.0
-
1.0
1.0
Drain, Max
-
-
-
-
-
4.0
4.0
4.0
SIS
-
-
-
-
-
3.0
3.0
3.0
2.0
-
Agitation
-
-
-
-
-
4.0
4.0
4.0
Total Time (Excluding Fill &
Including Agitronic soak)
Total Timing (Excluding Fill &
Agitronic Soak)
-
-
-
1.0
1.0
1.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
SIS
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
Spin
2.0
2.0
2.0
2.0
3.0
2.0
2.0
2.0
Motor-off
0.3
0.3
0.3
0.3
-
0.3
0.3
0.3
Spin
2.0
-
-
2.0
Motor-off
0.3
-
-
0.3
Spin
1.5
1.5
1.5
1.5
-
1.5
1.5
1.5
Motor-off
0.5
0.5
0.5
0.5
-
0.5
0.5
0..5
75.5
68.3
67.3
33.3
43.5
93.5
85.3
81.8
49.5
42.3
41.3
-
-
70.5
61.3
56.8
SIS - Short Interval Spin
12
13
4
LS1
1
2
1
3
BL
2
1
3
GR
-
4.0
Motor Plate
SPIN
-
Drain, Max
GR
Untangle cycle
4
3
2
1
2
1
3
3
2
-
1
2.0
-
2
2.0
-
1
-
-
Main
Fuse
-
-
B
-
-
N
-
-
E
-
Fill
Power Cord
Spin
L
R
RINSE
LS2
4.0
2
2.0
4.0
3
1
2.0
4.0
B
2.0
4.0
CONTROL BOARD
-
4.0
PCB
1.5
4.0
4
2.0
4.0
PC
2.0
4.0
B
2.0
Drain, Max
4
Untangle cycle
B
-
BA
-
-
2
-
4.0
2.0
1
6.0
-
3.0
GY
20.0
2.0
Agitation
B
6.5
Dynamic soak
2
2.0
1
4.0
4.0
GB
5.0
3.0
2
2.0
2.0
1
-
-
N
-
2.0
L
3.0
2.0
BA
3.0
3.0
WIV
3.0
Agitation
Brake Actuator
(BA)
Dynamic soak
Cold Valve (VC)
Wash
Pressure
Sensor (PS)
3.0
6.0
Lid Switch (LS)
3.0
-
PS
-
-
4
-
3.0
3
3.0
3.0
2
3.0
3.0
1
3.0
Dynamic soak
SC
Agitation
( Optional )
BO
32.0
8
32.0
4
32.0
7
-
3
-
6
32.0
2
32.0
BR
32.0
5
Soak/ Agitation
PSW
CCW
Soak
-
3
Xtra High Medium
Fill
High &
Motor (M)
Water Level
High &
Y
M
Operation
Service at your door step
Shifting your Whirlpool Washing Machine
·
It is essential to pack the machine properly before it is move from one place to another to
prevent any damages during transportation.
·
To pack the machine properly, kindly contact the authorized Whirlpool Service Center in your
city. During the warranty period, whenever the machine is shifted from the original location
to another, a warranty transfer fee may be collected. This will also include the reinstallation
charge.
·
In addition to proper packing, please take extra precautions to prevent transit damage.
Damages to the machine during transportation by the customer is not covered by the
warranty provided by Whirlpool.
Service on Sundays and Holidays
·
In some cities where Whirlpool provides service, customers can avail of Sunday/Holiday
Service upon your specific request. For details, please contact our service centers.
After Sales Service
For any questions or service requests , please contact our Customer Service Office
Excellence Appliance Technologies Inc.
24 D. Tuazon Street Quezon City 1113 Philippines
Tel No (632) 7327370
Fax No (632) 7414929
Email : service@exatech.com.ph
Mobile : +63918-9373783
Specifications
Model code???
Power Supply
220V AC ,60Hz
6 Amps
Capacity*
6.5 kg of dry
clothes
Type of
Wash System
Agipeller
Agipeller rpm
150
Spin Speed
740rpm(Max)
Machine Weight
33kg
Input Power
(Motor Rating)
360W
Wash/Spin Basket
Stainless Steel
Soak
Yes
Bleach inlet
Yes
Lint Filter
Yes
Rat Mesh
Yes
Dimensions(WxDxH)
540x565x925
Water Pressure
0.2kg/cm2 to 7kg/cm2
Temperature
Permitted
Machine Class
14
50°C
60°C
Class 1
15