Alpine IVX-C806 Owner`s manual

R
IVX-C806
IVX-M706
CVA-1006R
EN
DE
Mobile Multimedia Station
• OWNER'S MANUAL
Please read before using this equipment.
FR
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ES
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom denna användarhandledning.
IT
ALPINE ELECTRONICS, INC.
Tokyo office: 1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-8501, Japan
Tel.: (03) 3494-1101
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
Suite 203, 7300 Warden Ave. Markham,
Ontario L3R 9Z6, Canada
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Yamagata Printing Co., Ltd.
2-6-34, Takashima, Nishi-ku,
Yokohama, Kanagawa, Japan
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Tel.: (03) 9769-0000
ALPINE ELECTRONICS GmbH
Kreuzerkamp 7-11 40878 Ratingen, Germany
Tel.: 02102-45 50
ALPINE ITALIA S.p.A.
Via C. Colombo 8, 20090 Trezzano Sul Naviglio
MI, Italy
Tel.: 02-48 47 81
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue De La Belle Etoile, Z.I. Paris Nord Il
B.P. 50016 F-95945, Roissy, Charles De Gaulle
Cedex, France
Tel.: 01-48 63 89 89
ALPINE ELECTRONICS OF U.K., LTD.
13 Tanners Drive, Blakelands, Milton Keynes
MK14 5BU, U.K.
Tel.: 01908-61 15 56
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal De Gamarra 36, Pabellón 32
01013 Vitoria (Alava)-Apdo. 133, Spain
Tel.: 34-45-283588
Designed by ALPINE Japan
Printed in Japan (Y)
68P41262Y58-O
SE
CD changer for IVX-C806/IVX-M706/CVA-1006R.
CD-Wechsler für IVX-C806/IVX-M706/
CVA-1006R.
Changeur CD pour IVX-C806/IVX-M706/
CVA-1006R.
Cambiador de CD para IVX-C806/IVX-M706/CVA1006R.
Cambia CD per IVX-C806/IVX-M706/CVA-1006R.
CD-växlare för IVX-C806/IVX-M706/CVA-1006R.
CD changer for IVX-C806/IVX-M706/CVA-1006R.
CD-Wechsler für IVX-C806/IVX-M706/
CVA-1006R.
Changeur CD pour IVX-C806/IVX-M706/
CVA-1006R.
Cambiador de CD para IVX-C806/IVX-M706/CVA1006R.
Cambia CD per IVX-C806/IVX-M706/CVA-1006R.
CD-växlare för IVX-C806/IVX-M706/CVA-1006R.
You cannot connect to IVX-C806/IVX-M706/CVA-1006R.
Ein Anschluß an IVX-C806/IVX-M706/CVA-1006R
ist nicht möglich.
Il est impossible de se raccorder au IVX-C806/IVXM706/CVA-1006R.
No es posible conectarlo a IVX-C806/IVX-M706/CVA-1006R.
Non è possibile effettuare il collegamento a
IVX-C806/IVX-M706/CVA-1006R.
Du kan inte ansluta till IVX-C806/IVX-M706/CVA-1006R.
CHA-S624
CHA-1214
CHM-S620
Alpine CD Changers Give You More!
More musical selections, more versatility, more convenience.
An Alpine CD Changer adds more musical choices to your sound system. All models except CHM-S620 can be controlled from Alpine
head units and deliver excellent sound quality. The CHA-S624 is a high-performance 6-disc changer with a new M DAC, Ai-NET
compatibility, Optical Digital Output, 150 Disc Title Memory and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the
CHM-S620 M-Bus model is a super-compact 6-disc changer.
Von Alpine CD-Wechslern haben Sie mehr!
Mehr Musikauswahl, mehr Vielseitigkeit, mehr Komfort.
Mit einem Alpine CD-Wechsler erweitern Sie die Musikauswahl Ihres Systems. Sämtliche Modelle außer dem CHM-S620 lassen sich von
einer Alpine-Bedieneinheit aus steuern und liefern hervorragende Klangqualität. Der CHA-S624 ist ein Ai-NET-kompatibler HochleistungsWechsler für 6 CDs mit dem neuen M-DAC, Digitalausgang für Glasfaserkabel, CD-Titelspeicher für 150 Titel und CD-TEXT. Das AiNET-Modell CHA-1214 nimmt 12 CDs auf, und der M-Bus-kompatible CHM-S620 ist ein superkompakter Wechsler für 6 CDs.
Changeurs de CD Alpine : vous avez le choix!
Plus de sélections musicales, plus de souplesse, plus de confort.
Un changeur de CD Alpine permet d'augmenter la plage des sélections musicales de votre système embarqué. Tous les modèles,
l'exception du CHM-S620, peuvent être contrôlés à partir des autoradios Alpine et offrent une excellente qualité audio. Le modèle CHAS624 est un changeur 6 disques ultra performant compatible Ai-NET et équipé d'un convertisseur N/A standard, d'une sortie optique
numérique, d'une mémoire d'une capacité de 150 titres et de la fonction CD TEXT. Le modèle CHA-1214 Ai-NET peut contenir 12
disques. Le modèle CHM-S620 M-Bus est un changeur 6 disques super compact.
¡Los cambiadores Alpine de CD le ofrecen más!
Más selecciones musicales, más versatilidad y más ventajas.
Un cambiador Alpine de CD añade más opciones musicales a su equipo de sonido. Todos los modelos, excepto el CHM-S620, pueden
controlarse desde las unidades principales de Alpine y proporcionar un sonido de calidad excepcional. El modelo CHA-S624 es un
cambiador de 6 discos de alto rendimiento con el nuevo DAC "M" y compatibilidad con Ai-NET, salida digital óptica, memoria de
títulos de 150 discos y TEXTO CD. El modelo CHA-1214 Ai-NET admite 12 discos y el modelo CHM-S620 Bus-M es un cambiador de
6 discos y tamaño reducido.
I caricatori CD Alpine danno di più!
Più scelta, più versatilità, più comodità.
Un caricatore CD Alpine offre maggiore scelta. Tutti i modelli, eccetto il modello CHM-S620, possono essere controllati tramite le unità
di controllo Alpine e producono un suono di qualità eccellente. CHA-S624 è un caricatore a 6 dischi Ai NET compatibile e dotato di un
nuovo M DAC, di un'uscita ottica digitale, memorizzazione dei titoli di 150 dischi e CD TEXT. Il modello CHA-1214 Ai NET può
contenere un massimo di 12 dischi, mentre il modello CHM-S620 M-Bus è un caricatore a 6 dischi ultra compatto.
Alpines CD-växlare ger mer!
Fler musikval, mer variation, större bekvämlighet.
Med Alpines CD-växlare i systemet får du större musikalisk valfrihet. Alla modeller, utom CHM-S620, kan styras från Alpines
huvudenheter och ger enastående ljudkvalitet. CHA-S624 är en högpresterande växlare för 6 skivor med en ny M D/A-omvandlare,
kompatibel med Ai-NET, optisk digitalutgång, titelminne för 150 skivor och CD-TEXT. Modellen CHA-1214 Ai-NET rymmer 12 skivor
och modellen CHM-S620 M-Bus är en superkompakt växlare för 6 skivor.
ENGLISH
Contents
Operating Instructions
WARNING
WARNING .................................................. 3
CAUTION ................................................... 3
PRECAUTIONS ......................................... 4
Basic Operation
Using Face Cover .............................................. 8
Initial System Start-UP ..................................... 8
Raising the Monitor .......................................... 8
Lowering the Monitor ....................................... 9
Turning Power On or Off .................................. 9
Selecting the Monitor Opening Angle .............. 9
Adjusting the Monitor Viewing Angle .............. 9
Adjusting the Volume/Bass/Treble/Balance
(Between Left and Right)/Fader (Between
Front and Rear) ............................................ 10
Audio Mute Function ...................................... 10
Turning Loudness On or Off ........................... 10
Adjusting Source Signal Levels ...................... 10
Radio Operation
Manual Tuning ................................................ 11
Automatic Seek Tuning .................................. 11
Mono/Stereo Switching .................................. 12
Manual Storing of Station Presets .................. 12
Automatic Memory of Station Presets ............ 13
Tuning to Preset Stations ................................ 13
T.R.V.S. Search for Local Stations ................. 13
RDS Operation
Turning AF (Alternative Frequencies) On or Off ... 14
Receiving RDS Regional (Local) Stations ..... 14
Receiving Traffic Information......................... 15
PTY (Programme Type) Tuning ..................... 15
Receiving Traffic Information While Playing
CD/MD/Radio ............................................. 16
Priority PTY (Programme Type) ..................... 17
Turning Emergency Alarm Display On or Off ... 17
Displaying Radio Text .................................... 17
CD player Operation (IVX-C806 only)
(IVX-M706/CVA-1006R.....optional)
Playback .......................................................... 18
Fast Forward and Backward ........................... 18
Music Sensor (Skip) ........................................ 19
Repeat Play ..................................................... 19
M.I.X. (Random) Play .................................... 19
Displaying and Scrolling CD Title/Text ......... 19
Displaying List of Track Titles/CD Titles ....... 20
Controlling CD Changer (Optional) ............... 21
Multi-Changer Selection ................................. 21
MD Player Operation (IVX-M706 only)
(IVX-C806/CVA-1006R.....optional)
Playing Mini-Disc (MD) ................................. 22
Music Sensor (Skip) ........................................ 22
Fast Forward and Backward ........................... 23
Repeat Play ..................................................... 23
M.I.X. (Random) Play .................................... 23
Scrolling Displayed Titles ............................... 23
Displaying List for Track Titles/MD Titles..... 23
DVD/Video CD/CD Player/DVD
Changer Operation (Optional)
Playing DVD/Video CD/CD ........................... 24
Still/Pause ....................................................... 24
Chapter (DVD)/Track (Video CD) Sensor ...... 24
Fast Forward/Backward .................................. 25
Repeat Play ..................................................... 25
Playing tracks in random order (M.I.X.)
(Video CD/CD) ............................................ 25
Displaying List of Disc Titles ......................... 25
Controlling DVD Changer .............................. 26
Navigation System Operation (Optional)
Controlling Navigation System ....................... 27
Auxiliary Device Operation (Optional)
Operating Auxiliary Devices ........................... 28
1-EN
Audio Processor Operation (Optional)
Selecting Factory (Maker's) Equalization
Presets .......................................................... 29
Creating Personal Equalizer Characteristic
Curves .......................................................... 30
Selecting Factory Surround Mode Presets ...... 30
Adjusting Surround Levels and Surround Delay
Time ............................................................. 31
Selecting DHE (Digital Harmonic Enhancer)
Mode ............................................................ 31
Setting DHE Power or Fine Mode .................. 32
Selecting BBE Mode ...................................... 32
Customizing BBE Mode ................................. 33
Selecting Listening Position ........................... 33
Adjusting Listening Position .......................... 33
Adjustment of Time Correction Value ............ 34
Adjusting Cross-Over (X-Over) Point of 2-Way
Divider ......................................................... 34
Adjusting Levels ............................................. 35
Adjusting Time-Correction for 2-Way Speaker
System ......................................................... 36
Memorizing Divider Settings .......................... 37
Recalling Memorized Divider Settings Using
Function Buttons ......................................... 37
Recalling Divider Settings Memorized Using
Optional Divider .......................................... 37
Memorizing Characteristic Curves ................. 37
Recalling Memorized Characteristic Curves
Using Function Buttons ............................... 38
Selecting Characteristic Curves from Displayed
Audio Processor List ................................... 38
Other Useful Features
Displaying Spectrum Analyzer
(IVX-C806 only) ......................................... 39
Displaying Spectrum Analyzer
(IVX-M706/CVA-1006R only) ................... 40
Turning Defeat Mode On and Off ................... 40
Titling CDs ...................................................... 41
Adjusting Subwoofer Level (when subwoofer
is used with other speakers) ......................... 42
Switching Phase .............................................. 43
Setting the External Device Interrupt Mode ... 43
2-EN
Setting Interrupt Icon Display
(IN-INT) ...................................................... 44
Interrupt Feature (MIX LEVEL) .................... 44
Setting Bass Frequency ................................... 45
Setting Visual Mode ........................................ 45
Selecting Rear Monitor ................................... 46
Displaying Time .............................................. 47
Resetting Clock ............................................... 47
Setting Daylight Saving Time ......................... 47
Sound (Beep) Guide Function ........................ 48
Demonstration ................................................. 48
Setting Automatic Opening/Closing of
Monitor ........................................................ 49
Adjusting Brightness of Picture ...................... 49
Adjusting Tint of Picture ................................. 50
Adjusting Colour of Picture ............................ 50
Illumination Control ....................................... 51
Switching Background Textures/Colours ....... 51
Setting Automatic Background Texture/Colour
Scroll ........................................................... 52
Switching Display Modes ............................... 52
Playing 2 Sources Simultaneously .................. 53
Remote Control Operation
Controls on Remote Control ........................... 54
Battery Replacement ....................................... 55
Information
In Case of Difficulty ....................................... 56
Specifications .................................................. 59
Installation and Connections
Warning ........................................................... 60
Caution ............................................................ 60
Precautions ...................................................... 60
Installation ...................................................... 61
Connections .................................................... 64
* US and foreign patents licensed from Dolby
Laboratories.
WARNING
WARNING
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention
should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before
performing these functions. Failure to do so may result in
an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN
STILL HEAR OUTSIDE NOISE WHILE DRIVING.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to
the product. Return it to your authorized Alpine dealer or
the nearest Alpine Service Centre for repairing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.
INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper
polarity (+ and –) as instructed. Rupture or chemical
leakage from the battery may cause fire or personal injury.
Failure to do so may result in an accident.
KEEP FINGERS AWAY WHILE THE MOTORIZED
FRONT PANEL OR MOVING MONITOR IS IN MOTION.
DO NOT DISASSEMBLE OR ALTER.
Failure to do so may result in personal injury or damage to
the product.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do
so may result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result
in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in
fire, electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN
OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the
product.
3-EN
WARNING
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between
+45°C (+113°F) and 0°C (+32°F) before turning your unit
on.
Moisture Condensation
You may notice the Disc playback sound wavering due to
condensation. If this happens, remove the disc from the
player and wait about an hour for the moisture to
evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged
discs. Playing a bad disc could severely damage the
playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit
yourself. Return it to your Alpine dealer or the nearest
Alpine Service Station for servicing.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled
back into the player by the automatic reloading
mechanism.
Do not attempt to insert a disc into the unit when the unit
power is off.
Inserting Discs
Your player accepts only one disc at a time for playback.
Do not attempt to load more than one disc.
Make sure the label side is facing up when you insert the
disc. Your player will automatically eject any disc that is
inserted incorrectly. If the player continues to eject a
correctly inserted disc, push the RESET switch with a
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may
result in skips, but this will not scratch the disc or damage
the player.
New Discs
As a protective measure to prevent the CD from jamming,
the CD player will automatically eject discs with irregular
surfaces or inserted incorrectly. When a new disc is
inserted into the player and ejected after initial loading,
using your finger, feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps
or irregularities, this could inhibit proper loading of the
disc. To remove the bumps, rub the inside edge of the hole
and outside edge of the disc with a ballpoint pen or other
such instrument, then insert the disc again.
Centre
Hole
Centre
Hole
New
Disc
Bumps
Outside
(Bumps)
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and
never use any special shape discs.
Use of special shape discs may cause damage to the
mechanism.
4-EN
Installation Location
New Discs
Make sure the IVX-C806/IVX-M706/CVA-1006R will
not be installed in a location subjected to:
Before inserting an MD
Never install warped or irregular shaped MD into this
unit. Use your finger to feel around the outer edge of the
MD to make sure there are no irregularities. Inserting
defective or damaged MD could severely damage the
mechanism.
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Bumps
Correct Handling
Do not drop the disc while handling. Hold the disc so you
will not leave fingerprints on the surface. Do not affix
tape, paper, or gummed labels to the disc. Do not write on
the disc.
CORRECT
Using an MD
INCORRECT
CORRECT
Check and ensure the following:
Under no circumstances should you open the MD’s
shutter and touch the inside of the disc. Do not expose the
MD to direct sunlight. Place only 1 label in its proper
position. Make sure the MD is clean before inserting into
the player.
Sound Skips
Playing an MD while driving on a very bumpy road may
result in skips, but this will not damage the player.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could
cause the CD player to skip. For routine cleaning, wipe
the playing surface with a clean, soft cloth from the centre
of the disc to the outer edge. If the surface is heavily
soiled, dampen a clean, soft cloth in a solution of mild
neutral detergent before cleaning the disc.
• Do not expose to rain or water.
• Do not drop or apply shock.
• After turning the system off, a slight ghost of the
image will remain temporarily. This is an effect
peculiar to LCD technology and is normal.
• Under cold temperature conditions, the screen may
lose contrast temporarily. After a short warm-up
period, it will return to normal.
Disc Accessories
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the
disc to be out of standard specifications and may create
operational problems. We recommend not using these
accessories on discs played in Alpine CD players.
Transparent Sheet
Handling the Detachable Front Panel
Alpine products equipped with the Ai-NET bus,
connected to the IVX-C806/IVX-M706/CVA-1006R, can
be operated from the IVX-C806/IVX-M706/CVA-1006R.
Depending on the products connected, the functions and
displays will vary. For details, consult your Alpine dealer.
Disc Stabilizer
5-EN
WARNING
Remove the anti-theft cover when you drive. This prevents
the cover from falling off the unit and interfering with the
safe operation of the vehicle.
Operation of some of the functions of this unit is very
complex. Because of this, it was deemed necessary to
place these functions into a special screen. This will
restrict operation of these functions to times when the
vehicle is parked. This ensures the focus of the driver’s
attention will be on the road and not on the IVX-C806/
IVX-M706/CVA-1006R. This has been done for the safety
of the driver and passengers.
Title Input and Audio Processor Adjustments cannot be
made if the car is moving. The car must be parked and the
parking brake must be engaged for the procedure
described in the Owner’s Manual to be valid. The warning
“CAN’T OPERATE WHILE DRIVING,” will be
displayed if any attempts are made to perform these
operations while driving.
This operation is the same as when selecting sources using
the remote control. When the car is parked, the selection is
made as described in the Owner’s Manual.
6-EN
Basic Operation
PWR
OPEN/CLOSE
PWR
OPEN/CLOSE
SOURCE
(IVX-C806)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
SOURCE Rotary encoder
Rotary encoder
This section describes the basic operation of the radio. These operations also apply to the other
sources.
1
2
3
4
Press the PWR (Power) button on the unit to turn
the power on to the unit.
5
NOTE
If PAGE 1/2 or PAGE 1/3 appears in the Function Guide
menu, there are additional functions available for the
selected source. Access these functions by pressing the
FUNC button.
Press the OPEN/CLOSE button to open the
monitor. The unit beeps 3 times and raises the
monitor. The opening screen appears on the
monitor.
Press the SOURCE button. The display shows
the main menu screen.
Press the rotary encoder to execute the
selection. The Radio mode screen is displayed.
6
Press the SOURCE button again to select
another source.
Rotate the rotary encoder and select "RADIO"
from the main menu.
NOTES
• If a DVD player or DVD Changer is connected and its
power is on, the display shows " DVD or DVD-CHG ,
AUX2 " instead of " AUX1 AUX2 ."
• If both the DVD player and DVD Changer are
connected, the display shows " DVD " instead of
" AUX1 ", and " DVD-CHG " instead of " AUX2 ".
Radio Mode Screen
Selected Source
(IVX-C806 screen)
Current Time
Volume Level
The Function Guide displays the labels for each of the Function buttons. These labels will
change depending upon the functions for the selected source.
7-EN
Basic Operation
and
PWR
and
OPEN/CLOSE
PWR
OPEN/CLOSE
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Using Face Cover
An anti-theft face cover is provided with the
IVX-C806/IVX-M706/CVA-1006R.
Put the face cover onto the IVX-C806/IVX-M706/
CVA-1006R when you leave the vehicle.
Be sure to remove the anti-theft face cover when you
drive.
• Compatibility with Factory Steering Wheel
Radio Controls
If your vehicle has steering wheel controls for
the radio, an optional steering wheel control
interface may be available to connect to your
Alpine radio. For details, contact your Alpine
dealer.
Raising the Monitor
1
Initial System Start-UP
(IVX-C806)
RESET
switch
(IVX-M706/CVA-1006R)
RESET
switch
1
Immediately after installing or applying power to
the unit, it should be initialized. Press the RESET
switch with a ballpoint pen or any other pointed
object.
8-EN
Press the OPEN/CLOSE button.
The unit beeps 3 times and raises the monitor
automatically.
NOTES
• The IVX-C806/IVX-M706/CVA-1006R is a precision
device. With gentle handling, its unique capabilities
can be enjoyed for a long time.
• If the monitor touches an obstacle while it is being
raised, the unit will stop raising the monitor
immediately. Should this occur, remove the obstacle
and press the OPEN/CLOSE button again to lower the
monitor.
• When the movable monitor is opened, do not place any
object on the monitor and be careful not to bump or
apply any pressure to the monitor while it is open. This
can cause damage to the mechanism.
• Under low ambient temperature conditions, the
display may be dark for a short period of time
immediately after the power is turned on. Once the
LCD has warmed up, the display will return to
normal.
• For your safety, some operation of the unit cannot be
performed while the vehicle is in motion. In this case,
first stop the vehicle and engage the parking brake,
then perform the operation.
• Operation of the remote control (described on pages
54-55) can be carried out even while the monitor
screen is closed.
Lowering the Monitor
1
Press the OPEN/CLOSE button.
The unit will beep 3 times and lower the monitor
automatically.
NOTES
• The IVX-C806/IVX-M706/CVA-1006R is a precision
device. With gentle handling, its unique capabilities
can be enjoyed for a long time.
• If the monitor touches an obstacle while it is being
lowered, the unit will stop lowering the monitor
immediately.
Should this occur, remove the obstacle and press the
OPEN/CLOSE button again to lower the monitor.
Turning Power On or Off
1
Press the PWR (Power) button to turn on the
unit.
The opening screen appears automatically.
NOTE
The unit can be turned on by pressing any button on the
unit except the MUTE, OPEN/CLOSE and
(ANGLE) buttons.
2
Press the PWR (Power) button again to turn off
the unit.
NOTES
• Some of this unit's functions, cannot be performed
while the vehicle is in motion. Be sure to stop your
vehicle in a safe location and apply the parking brake,
before attempting these operations.
• The IVX-C806/IVX-M706/CVA-1006R draws minimal
current even when its power switch is turned off. If the
switched power (ignition) lead of the IVX-C806/IVXM706/CVA-1006R is connected directly to the positive
(+) post of the vehicle's battery, the battery may be
discharged. If this lead is unswitched, it must be
disconnected from the battery post should the vehicle
be left unused for an extended period of time.
An SPST (Single-Pole, Single-Throw) switch (sold
separately) can be added to simplify this procedure.
Then, you can simply place it in the OFF position
when you leave the vehicle. Turn the SPST switch back
ON before using the IVX-C806/IVX-M706/CVA1006R. For connecting the SPST switch, refer to
"Connection Diagram of SPST switch" on page 63.
• Some operation of the unit cannot be performed while
the vehicle is in motion. In this case, be sure to first
stop your vehicle and apply the parking brake, then
perform the operation.
Selecting the Monitor Opening
Angle
The monitor opening angle can be set in 2
positions.
1
Press and hold the OPEN/CLOSE button for at
least 2 seconds while the monitor is being
raised. Each press changes the monitor angle
back or forth.
Adjusting the Monitor Viewing
Angle
Adjust the monitor's angle for better visibility.
1
Press the
and
buttons to adjust the
monitor's angle so the screen will be in the best
viewing position. Each press of the buttons
produces a beep and changes the screen angle
between 80 and 104 degrees.
NOTES
• If the monitor touches an obstacle while the angle is
being adjusted the unit will stop the screen
immediately.
Should this happen, remove the obstacle and press the
or
button again.
• The screen colour will vary when viewed at certain
angles. Adjust the screen angle for the best viewing
position.
• If the voltage of the vehicle's battery power is low, the
screen may blink when the screen angle is changed.
This is normal and not a malfunction.
9-EN
Basic Operation
1 2
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
MUTE
(IVX-C806)
6
1 2
FUNC
6
MUTE
FUNC
SOURCE
Rotary encoder
SOURCE Rotary encoder
Adjusting the Volume/Bass/Treble/
Balance (Between Left and Right)/
Fader (Between Front and Rear)
1
Press the rotary encoder repeatedly until the
mode you wish to adjust is obtained. Each press
changes the modes as follows:
Turning Loudness On or Off
Loudness introduces a special low- and highfrequency emphasis at low listening levels. This
compensates for the ear's decreased sensitivity to
bass and treble sound.
NOTE
When an equalizer or digital sound processor is
connected, this function is inoperative.
→ BAS. → TRE. → BAL. → FAD. → VOL.
The volume level can be adjusted at any time by
just rotating the rotary encoder.
NOTE
When the subwoofer mode is ON, its level may also be
adjusted.
2
Rotate the rotary encoder to set to the desired
sound within 5 seconds after selecting the mode.
NOTE
If the rotary encoder is not turned or pressed within 5
seconds after selecting the BAS. (Bass), TRE. (Treble),
BAL. (Balance), or FAD. (Fader), the unit automatically
defaults back to the VOL. (Volume) mode.
Audio Mute Function
Activating this function will instantly lower the
volume level by 20 dB.
1
Press the MUTE button to activate the MUTE
mode. The audio level will decrease by about
20 dB.
Pressing the MUTE button again will bring the
audio back to its previous level.
10-EN
1
Press and hold the rotary encoder for at least 2
seconds to switch between the Loudness On
and Off modes.
Adjusting Source Signal Levels
If the difference in volume level between the CD/
MD player and FM radio is too great, adjust the
FM signal level as follows.
1
2
3
4
5
Press the SOURCE button.
The main menu screen appears in the display.
Press the 6 (SETUP) button.
The Setup mode screen is displayed.
Rotate the rotary encoder and select "FM
LEVEL." The Function Guide appears on the
display.
Press the 1 (LOW) or 2 (HIGH) button to make
the signal levels between the FM band and CD/
MD player closer.
Press the FUNC (RETURN) button to return to
the main menu screen.
Radio Operation
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 2 3
1 2 3
SOURCE
BAND
SOURCE
Rotary encoder
BAND
Rotary encoder
Manual Tuning
Automatic Seek Tuning
1
1
2
3
Press the SOURCE button after turning on the
power.
The main menu screen appears.
Rotate the rotary encoder to scroll the bottom
menu and select "RADIO," then press the rotary
encoder.
The radio mode is activated and the display
changes to the Radio Mode screen.
2
→ Distance
→
Local
g f
g f
5
→
Manual
( )
Press the 1 (() or 3 ()) button to change
the radio frequency downward or upward
respectively. Each press changes the frequency
by one step. When the button is pressed and
held, the frequency changes continuously until
the button is released.
Distance
→
Local
→
Manual
There are two modes you can select for auto
tuning, DX and Local:
Press the BAND button to select the desired
radio band. Each press changes the bands as
follows:
Press the 2 (TUNE) button to choose the
manual tuning mode. Each press changes the
function modes for the buttons 1 and 3 as
follows:
Press the 2 (TUNE) button to select the desired
mode, DX or Local. Each press changes as
follows:
→
• DX (Distance) mode (with DX SEEK indicator ON);
Both strong and weak stations will be tuned in.
• Local mode (with SEEK indicator ON);
Only strong stations will be tuned in.
The initial setting is DX.
→ FM1 → FM2 → FM3 → MW → LW
4
Press the BAND button repeatedly to select the
desired radio band, FM, MW or LW.
3
Press the 1 (g) or 3 (f) button to
automatically seek a radio station downward or
upward respectively.
When the unit finds a station, it stops. To
automatically seek next station, press the same
button again.
NOTE
When a stereo FM station is tuned in, the STEREO
indicator appears in the display.
NOTE
When a stereo FM station is tuned in, the STEREO
indicator appears in the display.
11-EN
Radio Operation
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Function buttons
(1 through 6)
1
Function buttons
(1 through 6)
3 4 5 6
1
3 4 5 6
FUNC
FUNC
BAND
Mono/Stereo Switching
BAND
3
Use the Mono (monaural) mode to reduce the
noise level of noisy stereo broadcast due to weak
signal.
1
Press the 4 (MONO) button in the radio mode.
"STEREO" indicator disappears and the
monaural mode activates.
2
To return to the stereo mode, press the 4
(MONO) button again.
NOTE
"STEREO" indicator appears when a stereo station is
tuned in.
Manual Storing of Station Presets
1
2
Tune in a desired radio station you wish to store
in the preset memory by manual or automatic
seek tuning.
Press the FUNC (PAGE 1/2) button.
Press and hold any one of the Function buttons
1 (P.SET1) through 6 (P.SET6) for at least 2
seconds. The Function Guide indicators in the
display, P.SET1 through P.SET6, will blink for 5
seconds.
12-EN
4
While the P.SET1 through P.SET6 indicators in
the display are blinking, press the Function
button into which you wish to store the station
(within 5 seconds). The indicators in the display
stop blinking, showing that the station has been
memorized at the Preset button pressed.
Repeat the above procedure (1 to 3) to store up
to 5 other stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
FM3, MW or LW).
NOTE
If a preset memory has already been set in the same
Function button, it will be cleared and the new station
will be memorized.
Automatic Memory of Station
Presets
The tuner can automatically seek and store 6
strong stations in the selected band in order of
signal strength.
1
2
T.R.V.S. Search for Local Stations
Using the T.R.V.S. feature of this unit, you can
automatically seek and memorize up to 12 local
stations (max.) in a memory separate from your
regular preset memory. This keeps the currently
preset stations you normally listen to, intact.
Press the BAND button in the radio mode to
select the desired radio band.
1
Press the 6 (A.MEMO) button.
The tuner automatically seeks and stores 6
strong stations into the 1 (P.SET1) to 6
(P.SET6) buttons in order of signal strength.
When the automatic storing has been
completed, the tuner goes to the station stored in
the 1 (P.SET1) button.
2
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the
automatic storing procedure began.
Press the BAND button in the radio mode and
select the desired radio band.
Press the 5 (T.R.V.S.) button to activate the
T.R.V.S. mode. The unit will automatically search
and store up to 12 receivable, local stations.
NOTE
If no stations are memorized, the display shows "NO
MEMORY."
3
Press the 1 (; P.DN) or 3 (P.UP :) button and
select your desired station.
4
To deactivate the T.R.V.S. mode, press the 5
(T.R.V.S.) button.
Tuning to Preset Stations
You can tune in the preset stations in memory on
each band using the Function buttons.
1
2
Press the BAND button in the radio mode to
choose the desired radio band.
Each press changes the radio bands.
Press the Function button 1 (P.SET1) through
6 (P.SET6) that has your desired preset station
in memory. The preset station is received.
13-EN
RDS Operation
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 2 3 4 5 6
1 2 3 4 5 6
FUNC
FUNC
SOURCE
RDS
SOURCE Rotary encoder
RDS Rotary encoder
Tips
The RDS digital data includes the followings:
PI
Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
Turning AF (Alternative
Frequencies) On or Off
The RDS (Radio Data System) is a radio
information system using the 57 kHz subcarrier of
regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic
information, station names, and to automatically
re-tune to a stronger transmitter that is
broadcasting the same programme.
1
2
Press the RDS button in the FM radio mode. The
display changes to the RDS setting screen.
Press the 3 (AF) button to select the AF
(Alternative Frequencies) ON or OFF mode.
• When the AF ON mode is selected, the unit
automatically tunes to a strong signal station in
the AF list.
• When the RDS station signal received has
become weak in the AF seek mode, press and
hold the 3 (AF) button for at least 2 seconds to
have the unit automatically seek a stronger
station in the AF list.
• Use the AF OFF mode when automatic retuning is not required.
3
Press the FUNC (RETURN) or RDS button to
return to the radio mode.
NOTE
To display the RDS Setting (information) screen in other
mode than FM radio band, for example, press the RDS
button.
14-EN
Receiving RDS Regional (Local)
Stations
1
2
3
4
5
Press the SOURCE button in the FM radio
mode.
The display shows the main menu screen.
Press the 6 (SETUP) button.
The Setup mode screen appears in the display.
Rotate the rotary encoder and select "REG."
The Function Guide menu is displayed.
Press the 1 (OFF) or 2 (ON) button to turn off
or on the REG (Regional) mode.
In the REG OFF mode, the unit automatically
keeps receiving the related local RDS station.
Press the FUNC (RETURN) button to return to
the previous screen.
Receiving Traffic Information
PTY (Programme Type) Tuning
1
1
2
3
4
Press the RDS button.
The display changes to the RDS setting screen.
Press the 4 (T.INFO) button to turn on the
Traffic Information mode.
2
Press the FUNC (RETURN) or RDS button to
return to the radio mode screen.
Press the 1 (g) or 3 (f) button and
select the desired traffic information station.
When the traffic information station is tuned in,
the TP indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being
broadcast, the unit is set in the standby mode.
When a traffic information broadcast begins, the
unit automatically receives it and the display
shows "Traffic Info."
Press the 5 (PTY) button to activate the PTY
mode. The Programme Type of the station being
currently received will be displayed for 5
seconds.
NOTE
If no button is pressed within 5 seconds after pressing the
5 (PTY) button, the PTY mode will be automatically
cancelled.
3
Press the 1 (; BACK) or 2 (NEXT :) button
within 5 seconds after activating the PTY mode
to choose the desired programme type while
"PTY" (programme type) is being displayed.
Each press scrolls the programme type by one.
4
Press the 5 (PTY) button within 5 seconds after
selecting the programme type to start searching
for a station in the selected programme type.
When traffic information broadcast is over, the
unit will automatically set in the standby mode.
NOTES
• If the traffic information broadcast signal falls below a
certain level, the unit remains in the receiving mode
for 1 minute. If the signal remains below a certain
level for over 70 seconds, the "TP OFF" indicator
appears in the display.
• If you do not want to listen to the traffic information
being received, lightly press the 4 (T.INFO) button to
skip that traffic information message. The T. INFO
mode will remain in the ON position to receive the
next traffic information message.
• If the volume level is changed while receiving traffic
information, the changed volume level will be
memorized. When traffic information is received next
time, the volume level will be automatically adjusted
to the level memorized.
Press the RDS button. The display changes to
the RDS Setting Screen.
If no station is found, "NO PTY" will be displayed.
5
Press the FUNC (RETURN) button to return to
the radio mode screen.
15-EN
RDS Operation
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 2 3 4
6
1 2 3 4
FUNC
6
FUNC
SOURCE
RDS/R.TEXT SOURCE
RDS/R.TEXT Rotary encoder
Rotary encoder
• When traffic information stations cannot be
received:
In the CD/MD mode:
When the TP signal can no longer be
received, the traffic information station of
another frequency will be selected
automatically.
Receiving Traffic Information While
Playing CD/MD/Radio
1
2
3
4
5
6
7
Press the RDS button. The display changes to
the RDS Setting screen.
Press the 4 (T.INFO) button to select a traffic
information station.
NOTE
The receiver is equipped with the EON (Enhanced Other
Networks) function so if the station being received does
not broadcast the traffic information, the receiver
automatically tunes in the related station that broadcasts
the traffic information.
Press the FUNC (RETURN) or RDS button. The
display returns to the previous source screen.
To end the traffic information mode, press the
RDS button. The display changes to the RDS
Setting screen.
Press the 4 (T.INFO) button to turn off.
Press the FUNC (RETURN) button to return to
the previous source screen.
To select the desired traffic information
station, first display the radio mode screen and
press the 1 (g) or 3 (f) button to select
the desired traffic information station.
• When the traffic information broadcast starts,
the unit automatically mutes the CD/MD player
or the regular FM broadcast.
• When the traffic information broadcast finishes,
the unit automatically returns to the original
source you were playing before the traffic
information broadcast began.
16-EN
8
When the desired traffic information station has
been selected, switch to the desired source
mode screen, CD/MD or Radio.
Priority PTY (Programme Type)
This function allows presetting of a programme
type such as music category, news, etc. You can
listen to a programme in the preset programme
type as the unit automatically gives priority to the
preset programme type when it begins
broadcasting, and interrupts the programme you
are currently listening. This feature is functional
when your unit is set to a mode other than the LW
and MW modes.
1
2
2
3
4
Press the 6 (P.PTY) button to activate the
PRIORITY PTY mode.
The programme type selected by the P.PTY is
displayed for 5 seconds.
Press the 1 (; BACK) or 2 (NEXT :) button
within 5 seconds to choose a desired
programme type. Then press 6 (P.PTY) button.
The PRIORITY PTY function will activate.
The "P.PTY" indicator lights up.
NOTE
When the P.PTY mode is set to the ON position, the unit
automatically plays the preset programme type whenever
the unit receives the programme type even while the unit
is displaying other source screen than radio.
If you do not want to listen to the programme being
received, press the 6 (P.PTY) button to skip the P.PTY
mode. The P.PTY mode will remain in the P.PTY ON
position to receive the next preset programme type when
it occurs.
4
1
Press the RDS button.
The display changes to the RDS Setting Screen.
NOTE
If no button is pressed within 5 seconds after pressing the
6 (P.PTY) button, the PRIORITY PTY mode is
automatically cancelled.
3
Turning Emergency Alarm Display
On or Off
Press and hold the 6 (P.PTY) button for at least
2 seconds to turn on the Priority PTY
(interrupting) mode.
• To disable the PRIORITY PTY (interrupting)
function, press and hold the 6 (P.PTY) button
for more than 2 seconds.
Press the SOURCE button.
The display shows the main menu screen.
Press the 6 (SETUP) button.
The Setup mode screen appears in the display.
Rotate the rotary encoder and select "PTY31."
The Function Guide menu is displayed.
Press the 1 (OFF) or 2 (ON) button to select
the PTY31 Off or On mode.
In the PTY31 On mode, the unit will show
"ALARM" in the display when the unit receives
the PTY31 (Emergency Broadcast) signal.
NOTE
If emergency broadcast is received, the unit changes to
the radio mode even while you are playing a source other
than radio.
5
When your selection has been made, press the
FUNC (RETURN) button to return to the main
menu screen.
Displaying Radio Text
Text messages from a radio station can be
displayed.
1
2
3
Tune in a radio station that transmits text
messages.
Press and hold the R.TEXT button for at least 2
seconds in the FM radio mode to activate the
Radio Text mode.
The display shows "R/T WAIT" for a few
seconds.
To deactivate the Radio Text mode, press and
hold the R.TEXT button for at least 2 seconds.
NOTE
If there is no receivable text message or the unit cannot
receive a text message properly, the display shows "NO
TEXT."
NOTE
In the PRIORITY PTY function, unlike in the T.INFO
function, the volume does not increase during operation.
5
Press the FUNC (RETURN) button to return to
the previous screen.
17-EN
CD player Operation (IVX-C806 only)
(IVX-M706/CVA-1006R.....optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 2 3 4 5 6
1 2 3 4 5 6
SOURCE
c
SOURCE
Rotary encoder
Playback
Rotary encoder
4
Only IVX-C806 has a built-in CD player.
When an optional Alpine CD player or CD Changer
is connected, you can control it from the IVX-C806/
IVX-M706/CVA-1006R.
(When a CD Changer is connected, see page 21 to
select your desired disc.)
Press the eject (c) button when you want to
eject the CD. (If you use an optional CD player,
press the eject button on the optional CD player.)
NOTES (IVX-C806 only)
• Three-inch (8 cm) CD's can be used.
• Only compact discs containing the mark shown can be
used.
IVX-C806 IVX-M706 CVA-1006R
\
×
×
Slave CD player
Option
Option
Option
CD Changer
Option
Option
Option
built-in CD
1
2
Press the SOURCE button to display the main
menu screen.
Rotate the rotary encoder and select the CD
player mode. Then, press the rotary encoder to
execute the selection.
The display shows the CD player mode screen.
When a CD is inserted into the CD SLOT of the
IVX-C806, with the label side facing up, the unit
starts to play the CD.
IVX-M706/CVA-1006R:
When an optional Alpine CD player is connected,
inserting an CD into the optional CD player starts
playback automatically.
3
• We cannot fully guarantee the playback of CD-R (CDRecordable). You cannot playback CD-RW (CDReWritable) on this unit.
• Be sure to turn the ignition key to the ACC or ON
position before inserting an CD. Otherwise it may
cause damage to the player.
To temporarily pause playing, press the 2 (:/J)
button.
To resume play, press the 2 (:/J) button for a
second time.
18-EN
Fast Forward and Backward
1
Press and hold the 3 (f) or 1 (g) button
to quickly move forward or backward respectively
to reach the desired music section on the disc.
Release the button when the desired section is
reached.
Music Sensor (Skip)
This feature allows you to go to the beginning of a
track.
1
Lightly press the 1 (g) button during the CD
play to return to the beginning of the current
track.
If you wish to return to the beginning of a track
further back, repeatedly press the 1 (g)
button until the desired track is reached.
Displaying and Scrolling CD Title/
Text
If titles have been memorized for CDs, the CD
titles can be shown on the display (for titling CDs,
see "Titling CDs" on page 41). The text for the
CD titles/tracks can be displayed and scrolled
while you are playing a music CD with title/text.
1
Lightly press the 3 (f) button during the CD
play to advance to the beginning of the next
track. If you wish to advance to the beginning of
a track further ahead, repeatedly press until the
desired track is reached.
Repeat Play
1
Press the 4 (REPEAT) button while the track
that you want to play repeatedly is playing.
The track will be repeatedly played until the
repeat mode is cancelled.
To cancel the repeat play, press the 4
(REPEAT) button until the REPEAT indicator
disappears.
NOTE
If a CD Changer is connected and the REPEAT ALL
mode is selected, the unit repeatedly plays back all tracks
on the disc selected.
M.I.X. (Random) Play
In the M.I.X. mode, the tracks on the disc will be
played back in a random sequence.
1
Press the 6 (SCROLL) button during CD play.
Each press changes between the CD title
scrolling mode and track title scrolling mode.
Description of "Title" and "Text":
• Title; this unit allows you to title (name) CDs
(see page 41).
• Text; Some CDs have pre-recorded text
information for the CD/track names etc.
NOTES
• If either of the disc and track titles is unavailable, the
space for that title in the display will be left blank.
• If both of the disc and track titles are unavailable, the
display will show "NO TITLE."
For the MD player, the same display as above will be
shown.
2
If the text/title is longer than 12 characters, press
and hold the 6 (SCROLL) button for at least 2
seconds to scroll the text/title.
To stop the scrolling, press and hold the 6
(SCROLL) button for at least 2 seconds.
NOTES
• Depending on the character styles, characters may not
be displayed correctly.
• The unit might automatically scroll the text.
• Text can only be displayed on CD changers that are
enabled with CD TEXT.
Press the 5 (M.I.X.) button in the CD mode.
All the tracks on the disc will be played back in a
random sequence.
The M.I.X. play continues until the M.I.X. mode is
cancelled. To cancel the M.I.X. play, press the 5
(M.I.X.) button repeatedly until the M.I.X.
indicator disappears.
NOTES
• If a CD Changer equipped with the M.I.X. ALL function
is connected, M.I.X. ALL will also be selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback
sequence.
• During M.I.X. play, Repeat Play for a single track will
be disabled.
19-EN
CD player Operation (IVX-C806 only)
(IVX-M706/CVA-1006R.....optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Function buttons
(1 through 6)
Function buttons
(1 through 6)
FUNC
FUNC
SOURCE
BAND SOURCE LIST Rotary encoder
Displaying List of Track Titles/CD
Titles
If CD titles have been memorized, you can select
a CD from the CD title list.
When CD text discs are inserted into the CD
player (for IVA-C806 only), you can select a track
from the displayed list of track titles.
(For memorizing titles, see page 41.)
1
2
3
Press the LIST button in the CD/CD Changer
mode.
CD (built-in player) mode:
If the titles have been memorized for CDs, the
list of CD titles can be displayed.
When CD text discs are inserted. The list of Track
titles will be displayed.
CD Changer/CD (when connected to the CD
player) mode:
If the titles have been memorized for CDs, the
list of CD titles can be displayed.
Rotate the rotary encoder and select (highlight)
your desired track title or CD title to play.
Press the rotary encoder to execute the
selection.
The selected title plays, the title list screen
closes, and the CD mode main screen or CD
Changer mode main screen appears.
20-EN
BAND LIST
CHANGER
(CVA-1006R only)
Rotary encoder
NOTES
• If the disc is not titled, the display shows "NO TITLE
CD." If no disc is loaded, the display shows "NO
DISC."
• Pressing the LIST or FUNC (RETURN) button while
the list of the disc titles is being displayed, changes the
display back to the CD/CD Changer mode screen.
• IVX-C806:
Pressing the 2 button displays the title list or the
track title list only when a CD with text is loaded in
the built-in CD player.
• IVX-M706:
Pressing the 1 button toggles between the MD track
title list screen and CD title list screen.
• CVA-1006R:
When a CD player or CD Changer is connected,
pressing the 1 button displays the CD title list.
NOTES
• To select your desired track number on the selected
disc, lightly press the 1 (g) or 3 (f)
repeatedly until your desired track number is
displayed.
• After selecting the desired, you can operate in the
same way as for the CD player. For details please see
the CD player operation section.
• ∗ If both the CD Changer and DVD Changer are
connected, each pressing of the CHG (CHANGER)
button changes between the CD Changer mode and
the DVD Changer mode.
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be
connected to the IVX-C806/IVX-M706/CVA-1006R
if it is Ai-NET compatible. With a CD Changer
connected to the Ai-NET input of the IVX-C806/
IVX-M706/CVA-1006R, the CD Changer will be
controllable from the IVX-C806/IVX-M706/CVA1006R.
Using the KCA-400C (the Multi-Changer Switching
device) multiple changers can be controlled by the
IVX-C806/IVX-M706/CVA-1006R.
See the Multi-Changer Selection section on this
page for selecting the CD Changers.
∗ You can directly select the CD Changer mode by
pressing the CHANGER (CVA-1006R) button.
1
2
3
Press the SOURCE button to display the main
menu.
Multi-Changer Selection
Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers,
the KCA-400C (Multi-Changer Switching device)
must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2
Switching devices, you can connect up to 6 CD
Changers.
Rotate the rotary encoder to select "CD CHG,"
then press the rotary encoder.
The display changes to the CD Changer mode
screen.
1
When a 6-Disc CD Changer is connected:
2
Press the FUNC (PAGE 1/2) button. The
Function Guide display changes.
Press the Function buttons to select your desired
disc loaded. The Function buttons 1 (DISC1)
through 6 (DISC6) select the discs from the first
disc to 6th disc. For example, press the 3 (DISC
3) button to select the third disc.
NOTE
To select your desired track number on the selected disc,
lightly press the 1 (g) or 3 (f) repeatedly until
your desired track number is displayed.
Rotate the rotary encoder to select changer 1-4
(when one KCA-400C is connected) or changer
1-6 (when two KCA-400Cs are connected). Then
press the rotary encoder.
The display shows the selected CD Changer
mode screen.
NOTE
When one KCA-400C is connected to the changer,
"Changer 1-4" is displayed in the main menu. When two
KCA-400Cs are connected to the changer, "Changer 1-6"
is displayed in the main menu.
3
When a 12-Disc CD Changer is connected:
You can select the disc numbers 1 to 6 in the
same manner as for 6-disc Changer.
Press the FUNC (PAGE 1/3) button twice to
select the disc numbers 7 to 12. The Function
Guide display changes and now the Function
buttons 1-6 represent disc numbers 7-12.
Press the Function buttons (1 through 6) to
select your desired disc. For example, to select
9th disc, press 3 (DISC 9) button.
Press the SOURCE button to display the main
menu.
In changer mode, you can select the next
changer (connected changers only) by pressing
the BAND button on the unit or on the remote.
NOTE
You cannot operate this function in the title display or
Title inputting display.
4
To operate the selected changer, see "CD Player
Operation" section.
21-EN
MD player Operation (IVX-M706 only)
(IVX-C806/CVA-1006R.....optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 2 3 4 5 6
1 2 3 4 56
SOURCE
c
SOURCE LIST Rotary encoder
IVX-C806 IVX-M706 CVA-1006R
built-in MD
Slave MD Player
1
2
×
\
×
Option
Option
Option
Rotary encoder
NOTE
Before inserting an MD, use your finger to feel around
the MD cartridge. If you feel any small bumps or
irregularities, remove them because these may cause a
malfunction or damage to the player.
Playing Mini-Disc (MD)
IVX-M706 has a built-in MD player. This section
describes operation assuming that an Alpine MD
player is connected.
(When the MDA-5051R is connected with the IVXC806/IVX-M706/CVA-1006R, MDs can only be
played back.)
LIST
3
4
Press the 2 (:/J) button to temporarily pause
play. To resume play, press the 2 (:/J) button
for a second time.
Press the eject (c) button when you want to
eject the MD. (If you use an optional MD player,
press the eject button on the optional MD player.)
NOTES (IVX-M706 only)
• The player accepts only one MD at a time for
playback. Do not attempt to load more than one MD.
• Before inserting an MD, make sure that the MD
cartridge is clean and not warped. If it is dirty, wipe it
clean as dust or dirt may cause a malfunction of the
player.
• Never touch the surface of the MD itself by opening
the shutter on the cartridge.
• Do not insert any MD with stacked labels or label
peeling off.
• Be sure to turn the ignition key to the ACC or ON
position before inserting an MD. Otherwise it may
cause damage to the player.
Press the SOURCE button.
The main menu appears on the display.
Rotate the rotary encoder and select "MD" from
the main menu, then press the rotary encoder to
execute the selection.
The MD player mode screen appears on the
display.
IVX-M706
Music Sensor (Skip)
When an MD is inserted into the MD SLOT of
the IVX-M706, with the label side up, the unit
starts to play the MD.
When an optional Alpine MD player is
connected, inserting an MD into the optional MD
player starts playback automatically.
22-EN
1
Momentarily press the 1 (g) button once to
return to the beginning of the current track. If you
wish to access the beginning of a track further
back, repeatedly press until you reach the
desired track.
2
Press the 3 (f) button once to advance to
the beginning of the next track. If you wish to
access the beginning of a track further ahead,
press repeatedly until the desired track is
reached.
Fast Forward and Backward
1
Press and hold the 1 (g) or 3 (f) button
to quickly move backward or forward until you
reach the desired section of the track.
When you reach the desired section, release the
button. The player starts playing from that
section.
Displaying List for Track Titles/
MD Titles
1
Repeat Play
1
Press the 4 (REPEAT) button to play back
repeatedly the track being played. The REPEAT
indicator appears and the track plays repeatedly.
Press the 4 (REPEAT) button repeatedly until
the REPEAT indicator disappears to deactivate
the repeat play.
M.I.X. (Random) Play
1
Press the 5 (M.I.X.) button in the play or pause
mode. The M.I.X. indicator will illuminate and the
tracks on the disc will be played back in a
random sequence. After all the tracks on the disc
have been played back once, the player will
begin a new random sequence play until the
M.I.X. mode is deactivated.
To stop the M.I.X. play, press the 5 (M.I.X.)
button repeatedly until the M.I.X. indicator
disappears.
Scrolling Displayed Titles
2
3
Press the LIST button in the MD player mode.
The list of the Track Titles/ MD titles appears in
the display.
MD (built-in player) mode:
The list of Track Titles will be displayed.
MD (when connected to the MD Player):
The list of MD Titles will be displayed.
Rotate the rotary encoder to select the desired
title by moving the cursor to that title.
Press the rotary encoder to execute the
selection.
The selected Track or MD title will be played
back and the MD player mode screen will
appear.
NOTES
• If the MD is not titled, the display shows "NO TITLE
MD." If no MD is loaded, the display shows "NO
DISC."
• Pressing the LIST or FUNC (RETURN) button while
the list of the titles is being displayed changes the
display back to the MD player mode screen.
• IVX-C806:
Pressing the 2 button displays the CD title list or the
track title list only when a CD with text is loaded in
the built-in CD player.
• IVX-M706:
Pressing the 1 button toggles between the MD track
title list screen and title list screen.
• CVA-1006R:
When a CD/MD player or CD Changer is connected,
pressing the 1 button displays the title list.
With IVX-M706 built-in MD or IVX-C806, CVA1006R connected, the MD player can scroll titles
(disc or track names) having up to a maximum of
32 characters.
1
Press the 6 (SCROLL) button repeatedly while
an MD is being played.
Each press toggles between the MD title
scrolling and track title scrolling.
2
Press and hold the 6 (SCROLL) button for at
least 2 seconds to start the auto scrolling.
The title will be scrolled repeatedly.
To deactivate the auto scrolling, press and hold
the 6 (SCROLL) button for at least 2 seconds.
NOTES
• Depending on the MD deck used for recordings/
inputting titles, the characters may not be displayed
correctly.
• If the MD title or track titles are not memorized, the
unit displays "NO TITLE."
23-EN
DVD/Video CD/CD Player/DVD Changer Operation (Optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 2 3 4 5
1 2 3 4 5
SOURCE
SOURCE
LIST
LIST
Rotary encoder
NOTE
Press the 6 (F.GUIDE) button during DVD/video CD/
CD play to turn on or off the Function Guide display.
In the ON position:
The Function Guide display will always be shown.
In the OFF position:
The Function Guide display will disappear after
approx. 5 seconds if no button is pressed.
If you want to display the Function Guide screen
again, press any one of the Function buttons 1
through FUNC .
Playing DVD/Video CD/CD
If an optional Alpine DVD/video CD/CD player is
connected to the IVX-C806/IVX-M706/CVA-1006R,
you can control it from the IVX-C806/IVX-M706/CVA1006R.
WARNING
It is dangerous (and illegal in many states) for the
driver to watch the TV/Video while driving the
vehicle. The driver may be distracted from looking
ahead and an accident could occur.
Install the IVX-C806/IVX-M706/CVA-1006R
correctly so that the driver cannot watch TV/Video
unless the vehicle is stopped and the emergency
brake is applied.
If the IVX-C806/IVX-M706/CVA-1006R is not
installed correctly, the driver will be able to watch
the TV/Video while driving the vehicle and may be
distracted from looking ahead causing an
accident. The driver or other people could be
severely injured.
1
2
Press the SOURCE button to display the main
menu screen.
Rotate the rotary encoder and select "DVD" from
the menu. Then, press the rotary encoder to
execute the selection.
The display shows the DVD player mode screen.
Insert a disc into the DVD/video CD/CD player,
the player starts playing.
24-EN
Rotary encoder
Still/Pause
1
Press the 2 (:/J) button during DVD/video CD/
CD play to freeze frame or pause. To resume
normal play, press the 2 (:/J) button for a
second time.
Chapter (DVD)/Track (Video CD)
Sensor
1
Lightly press the 1 (g) or 3 (f) button
during DVD/video CD/CD play to return to the
beginning of the chapter/track being currently
played or advance to the beginning of the next
chapter/track respectively.
NOTE
The word "chapter or track" means a division of the
recorded picture/sound on a DVD/video CD/CD
respectively.
Fast Forward/Backward
1
Press and hold the 1 (g) or 3 (f) button
during play to fast backward or forward
respectively. Release the button when you reach
the desired portion you wish to play. Playback
starts from that portion.
Repeat Play
1
Press the 4 (REPEAT) button during play to
repeatedly play the chapter/track or title/disc
being currently played.
Each press changes the repeat play as follows:
DVD:
Chapter
Title
Repeat Off
→
→
(repeat play) (repeat play) (normal play)
Video CD/CD:
Track
Disc
↔
(repeat play)
(repeat play)
NOTE
The track/disc repeat modes cannot be used on video
CDs with playback control (PBC). Press "MENU" to
turn the PBC function off. For more details, see the
operating instructions of your DVD player or DVD
Changer.
Playing tracks in random order
(M.I.X.)(Video CD/CD)
You can play all the tracks in random order.
You can use the M.I.X. function only on the
connected DVD player equipped with the M.I.X.
function.
1
Press the 5 (M.I.X.) button while playing the
Video CD or CD. All the tracks play in random
order.
To cancel M.I.X play and return to the original
play order, Press the 5 (M.I.X.) button again.
Displaying List of Disc Titles
If titles have been memorized for Video CDs/CDs,
the list of the Video CDs/CD titles can be
displayed and Video CDs/CDs can be selected by
their titles. (For memorizing titles, see page 41.)
1
2
3
Press the LIST button in the DVD/DVD Changer
mode.
The list of disc titles will be displayed and
memorized titles will be displayed also.
When DVD disc is inserted, "DVD VIDEO" will be
displayed (Depending on the DVD product, "NO
TITLE CD" may be displayed as well).
Rotate the rotary encoder and select (highlight)
your desired disc title to play.
Press the rotary encoder to execute the
selection.
The selected title plays, the title list screen
closes, and the DVD mode main screen or DVD
Changer mode main screen appears.
NOTES
• If the disc is not titled, the display shows "NO TITLE
CD." If no disc is loaded, the display shows "NO
DISC."
• When the DVA-5205P is connected:
To display the list of disc titles, switch to the DVD
main screen mode and press the LIST button while
playing the video CD or CD.
• Pressing the LIST or FUNC (RETURN) button while
the list of the disc titles is being displayed, changes the
display back to the DVD/DVD Changer mode screen.
• IVX-C806:
Pressing the 2 button displays the title list or the
track title list only when a CD with text is loaded in
the built-in CD player.
• IVX-M706:
Pressing the 1 button displays the title list or the MD
track title list screen.
• CVA-1006R:
When a CD/MD player or changer is connected,
pressing the 1 button displays the title list.
NOTES
• You cannot use the repeat play mode during M.I.X.
play.
• The M.I.X. play mode cannot be used on video CDs
with the playback control (PBC). Press "MENU" to
turn the PBC function off. For more details, see the
operating instructions of your DVD player, DVD
changer.
25-EN
DVD/Video CD/CD Player/DVD Changer Operation (Optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Function buttons
(1 through 6)
Function buttons
(1 through 6)
FUNC
FUNC
SOURCE
SOURCE
Rotary encoder
Controlling DVD Changer
If an optional Alpine DVD Changer is connected
to the IVX-C806/IVX-M706/CVA-1006R, the DVD
Changer can be controlled from the IVX-C806/
IVX-M706/CVA-1006R.
∗ You can directly select the DVD Changer mode
by pressing the CHANGER (CVA-1006R)
button.
1
2
3
Press the SOURCE button to display the main
menu.
Rotate the rotary encoder to select "DVD CHG,"
then press the rotary encoder.
The display changes to the DVD Changer mode
screen.
When a 6-Disc DVD Changer is connected:
Press the FUNC (PAGE 1/2) button. The
Function Guide display changes.
Press the Function buttons to select your desired
disc loaded. The Function buttons 1 (DISC1)
through 6 (DISC6) select the discs from the first
disc to 6th disc. For example, press the 3 (DISC
3) button to select the third disc.
26-EN
CHANGER
(CVA-1006R only)
Rotary encoder
NOTES
• To select your desired track number on the selected
disc, lightly press the 1 (g) or 3 (f)
repeatedly until your desired track number is
displayed.
• After selecting the desired, you can operate in the
same way as for the DVD/Video CD/CD player. For
details please see the DVD/Video CD/CD player
operation section.
• * If both the CD Changer and DVD Changer are
connected, each pressing of the CHG (CHANGER)
button changes between the CD Changer mode and
the DVD Changer mode.
Navigation System Operation (Optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
SOURCE
SOURCE
Rotary encoder
Rotary encoder
Controlling Navigation System
If an optional Alpine Navigation System is
connected to the IVX-C806/IVX-M706/CVA1006R, some of its functions can be controlled
from the IVX-C806/IVX-M706/CVA-1006R.
The functions and display indicators available will
vary depending upon the Navigation System
connected. For details, consult your Alpine dealer.
1
2
Press the SOURCE button. The main menu
screen appears on the display.
Rotate the rotary encoder and select "NAVI,"
then press the rotary encoder to execute the
selection.
The Function Guide display changes to show the
same button names as those for the remote
control supplied with your navigation system.
NOTES
• When the V. SEL button is pressed while the
Navigation selection mode is being selected in the
VISUAL setting (refer to page 45), the navigation
mode will be directly activated.
• If the Navigation mode menu is not displayed on the
main menu screen, select "AUX IN" in the Setup mode
screen and set the Navigation mode to the ON
position.
• If you use the buttons displayed, you can control the
navigation system from IVX-C806/IVX-M706/CVA1006R in the similar way to the remote control
operation.
For operation, refer to the Owner's Manual for your
navigation system.
• Depending on the navigation system connected to this
unit, some functions and displays may vary.
27-EN
Auxiliary Device Operation (Optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
SOURCE
SOURCE Rotary encoder
Operating Auxiliary Devices
To operate your devices connected to the AUX
terminals on the rear panel of IVX-C806/IVX-M706/
CVA-1006R, follow the procedure described below.
WARNING
It is dangerous (and illegal in many states) for the
driver to watch the TV/Video while driving the
vehicle. The driver may be distracted from looking
ahead and an accident could occur.
Install the IVX-C806/IVX-M706/CVA-1006R
correctly so that the driver cannot watch TV/Video
unless the vehicle is stopped and the emergency
brake is applied.
If the IVX-C806/IVX-M706/CVA-1006R is not
installed correctly, the driver will be able to watch
the TV/Video while driving the vehicle and may be
distracted from looking ahead causing an
accident. The driver or other people could be
severely injured.
1
2
Press the SOURCE button.
The main menu screen appears on the display.
Rotate the rotary encoder and select "AUX", then
press the rotary encoder to execute the
selection.
NOTE
If the AUX mode is not displayed on the main menu,
select "AUX IN" in the Setup mode screen. Either AUX1
or AUX2 should be turned ON.
28-EN
Rotary encoder
Audio Processor Operation (Optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Function buttons
(1 through 6)
Function buttons
(1 through 6)
4
FUNC
4
FUNC
SOURCE
SOURCE
Rotary encoder
Selecting Factory (Maker's)
Equalization Presets
If an optional Alpine Equalizer is connected to the
IVX-C806/IVX-M706/CVA-1006R, the Equalizer
can be controlled from the IVX-C806/IVX-M706/
CVA-1006R.
Six equalization curves are preset on the
Equalizer at the factory.
1
2
3
4
5
Rotary encoder
NOTE
When the FUNC (RETURN) button is pressed, the
display returns to the previous screen.
Tip
In the equalizer mode, for example, you can horizontally
scroll each of the mode screens by rotating the rotary
encoder to the left or right. You can also adjust the
volume level by pressing and rotating the rotary encoder
(DHE, Surround, BBE, listening position, time collection
mode main screen only).
Press the SOURCE button.
The main menu screen appears on the display.
Press the 4 (A.PROC) button to display the list
of the Audio Processors (A.PROC).
Rotate the rotary encoder and select "Equalizer."
Then press the rotary encoder to execute the
selection.
The display changes to the Equalizer mode
screen.
Select a desired Equalizer characteristic curve
and press the corresponding Function button
(1 (FLAT) through 6 (NEWS)).
You can select your desired equalizer
characteristic curve from 6 preset characteristic
curves; FLAT, MALE, FEMALE, POPS, ROCK
and NEWS.
When you have selected your desired
characteristic curve, press the FUNC (RETURN).
The display returns to the Audio Processor List
screen.
29-EN
Audio Processor Operation (Optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Function buttons
(1 through 6)
Function buttons
(1 through 6)
1
4
1
FUNC
4
FUNC
SOURCE
SOURCE Rotary encoder
Creating Personal Equalizer
Characteristic Curves
You can create your own equalizer characteristic
curves. The following is the procedure.
NOTE
The Parking Brake must be engaged to access the
Equalizer Adjustment mode screen. Attempting to access
this screen while driving, the warning – CAN’T
OPERATE WHILE DRIVING will be appeared in the
display.
1
2
3
4
5
Display the equalizer mode screen by pressing
one of the Function buttons 1 (FLAT) through
6 (NEWS) to select the desired characteristic
curve you wish to change.
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The display changes to show the equalizer
adjustment screen .
Rotate the rotary encoder clockwise or
counterclockwise to select the frequency that
you wish to adjust. The colour of the frequency
changes when it is selected.
Press the rotary encoder to execute the
selection.
Make level adjustments by rotating the rotary
encoder. Press and release the rotary encoder
at the desired level.
Repeat the above steps to adjust other
frequencies.
6
When the adjustments have been completed,
press the FUNC (RETURN) button.
The display changes to the Equalizer mode
screen.
30-EN
Rotary encoder
Selecting Factory Surround Mode
Presets
Depending upon the music source you listen to,
you can choose your desired surround mode from
6 factory-preset surround modes.
1
2
3
4
Press the SOURCE button.
The main menu screen appears.
Press the 4 (A.PROC) button.
The Audio Processor list will be displayed.
Turn the rotary encoder and select "Surround"
then press the rotary encoder.
The Surround mode screen appears.
Press the Function button (1 through 6) that
has your desired surround mode.
NOTE
You can choose from 6 factory preset surround modes
(NORMAL, STADIUM, LIVE, CHURCH, DANCE, and
HALL).
5
Press the FUNC (RETURN) when your selection
has been made.
The display returns to the Audio Processor List
screen.
Tip
When the FUNC (RETURN) button is pressed, the
display returns to the previous screen.
Adjusting Surround Levels and
Surround Delay Time
If your equalizer connected is equipped with the
surround level/time adjustment feature, you can
adjust the surround sound levels and surround
delay time to suit to your preference.
1
2
3
4
5
Display the surround mode screen and press
one of the Function buttons 2 (STADIUM)
through 6 (HALL) (except "NORMAL") that has
the surround mode you wish to adjust.
Selecting DHE (Digital Harmonic
Enhancer) Mode
The DHE mode enhances the sound of musical
instruments or vocals, while masking road noises
of a moving vehicle. The result is music with more
clarity.
1
2
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The display changes to the surround adjustment
screen.
3
Press the rotary encoder to select the surround
delay time or surround level that you wish to
adjust.
Each press toggles between the surround delay
time and surround level modes.
4
Turn the rotary encoder clockwise or
counterclockwise to adjust the surround sound
level or delay time to your preference.
After adjustment press the rotary encoder.
Press the SOURCE button.
The main menu screen appears on the display.
Press the 4 (A.PROC) button to display the
Audio Processor List screen.
Rotate the rotary encoder and select "DHE,"
then press the rotary encoder to execute the
selection.
The DHE mode screen appears.
Press one of the Function buttons 2 (MODE1)
through 6 (MODE5) that has your desired DHE
mode. There are 5 modes as follows.
When the 1 (OFF) button is pressed, the DHE
mode will be deactivated.
Beat MAX (MODE1)
Enhances the rhythmic bass sound to
make very harmonic bass sound.
Lyric MAX (MODE2)
Enhances voice of female singers to make it brighter.
When your adjustments are complete, press the
FUNC (RETURN) button.
The display returns to the Surround mode
screen.
Beat MIX (MODE3)
Balances the bass sound to make it brighter.
Lyric MIX (MODE4)
Reproduces voice of female singers clearer.
Phase MIX (MODE5)
Reproduces any kind of music sources
more balanced and crisp.
5
When you have selected your desired DHE
mode, press the FUNC (RETURN) button.
The display returns to the Audio Processor List
screen.
Tip
When the FUNC (RETURN) button is pressed, the
display returns to the previous screen.
31-EN
Audio Processor Operation (Optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Function buttons
(2 through 6)
Function buttons
(2 through 6)
1
1
4
4
FUNC
FUNC
SOURCE
SOURCE Rotary encoder
Setting DHE Power or Fine Mode
The DHE Power and Fine modes enhance the
DHE effects. Power makes coarse adjustments to
the overall balance whereas Fine will make more
subtle changes. Listen to how each mode affects
the music and select the one most pleasing to
your taste.
1
2
3
Activate the DHE mode, then press one of the
Function buttons 2 (MODE1) through 6
(MODE5) that has the desired DHE mode to be
adjusted.
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The DHE adjustment mode is activated.
Press the rotary encoder to select the desired
mode either DHE Power or DHE Fine mode,
then rotate the rotary encoder to select the ON
or OFF mode. Each press toggles between the
Power/Fine on and off modes.
When it is set to the ON mode, the DHE effects
will be enhanced.
Effect of the Power On mode:
• More powerful bass sound and crisp, clear
sound will be produced.
Effect of the Fine On mode:
• Vocal/chorus music will be refined and
becomes clearer.
Rotary encoder
Selecting BBE Mode
The BBE (Barcus Berry Electronics) Surround
Processor is designed to return the natural
balance of harmonic time alignment, which
disappears when the sound signal is amplified
and reproduced by loudspeakers. The result of
this processing is crisp, clean sound with tighter
transients and sharper imaging. If you make the
BBE adjustments after adjusting the surround
settings, the audible processing result will be
enhanced remarkably.
1
2
3
4
5
Press the SOURCE button.
The main menu screen appears in the display.
Press the 4 (A.PROC) button. The Audio
Processor List screen is displayed.
Rotate the rotary encoder and select "BBE" from
the list displayed. Press the rotary encoder to
execute the selection.
The display changes to the BBE mode screen.
Select a desired BBE mode and press the
corresponding Function button, 2 (MODE1)
through 4 (MODE3). The effect is proportionally
reduced for the BBE-2 and BBE-3 has the least
effect.
To deactivate the BBE mode, press the 1 (OFF)
button.
When the setting has been completed, press the
FUNC (RETURN) button.
Tip
When the FUNC (RETURN) button is pressed, the
display returns to the previous screen.
32-EN
Customizing BBE Mode
This function is operative only when an audio
processor equipped with the BBE level (Low and
High) adjustment feature is connected.
1
2
3
4
5
Activate the BBE mode (see the previous page),
then press the Function button 2 (MODE1)
through 4 (MODE3) that has the BBE mode you
wish to adjust.
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The BBE adjustment mode is activated.
Adjusting Listening Position
1
2
3
4
Press the rotary encoder to select "HI LEVEL" or
"LOW LEVEL." Each press toggles between "HI
LEVEL" and "LOW LEVEL."
Rotate the rotary encoder and adjust the level to
your desired level.
When adjustment is complete, press the FUNC
(RETURN) button. The display returns to the
BBE mode screen.
5
Activate the L.P.S. mode and select the listening
position you wish to adjust by referring to
"Selecting Listening Position" section.
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The display changes to the L.P.S. Adjustment
mode.
Press the rotary encoder and select "F/R" (Front/
Rear) or "L/R" (Left/Right) you wish to adjust.
Rotate the rotary encoder to adjust to the
desired listening position.
When the rotary encoder is rotated in the F/R
mode, the cursor moves forward or backward,
and when it is rotated in the L/R mode, the
cursor moves to the left or right.
When adjustment has been completed, press the
FUNC (RETURN) button.
The display returns to the L.P.S. mode screen.
Selecting Listening Position
You can select the listening position for optimum
sound field depending on the number of
passengers in the vehicle.
1
2
3
4
Press the SOURCE button.
The main menu screen appears on the display.
Press the 4 (A.PROC) button. The Audio
Processor List screen appears.
Rotate the rotary encoder and select L.P.S.
(Listening Position Setting) in the menu. Press
the rotary encoder to execute the selection. The
display changes to the L.P.S. (Listening Position
Selection) mode screen.
Press the Function button 2 (ALL) through 5
(FRONT/RIGHT) that has your desired listening
position.
NOTES
• The black squares show the listening positions.
• When the 1 (OFF) button is pressed, the L.P.S. mode
is deactivated.
5
When selection has been completed, press the
FUNC (RETURN) button.
The display returns to the Audio Processor List
screen.
Tip
When the FUNC (RETURN) button is pressed, the
display returns to the previous screen.
33-EN
Audio Processor Operation (Optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 2
4 6
1 2
FUNC
4 6
FUNC
SOURCE
SOURCE Rotary encoder
Adjustment of Time Correction
Value
1
2
3
4
5
Press the SOURCE button.
The main menu appears on the display.
Press the 4 (A.PROC) button.
The Audio Processor List appears.
Rotate the rotary encoder and select the "TimeCorr." (Time-Correction), then press the rotary
encoder.
The display changes to the Time-Correction
mode screen.
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The display changes to the Time-Correction
Adjustment mode screen.
7
Adjusting Cross-Over (X-Over)
Point of 2-Way Divider
If an optional Alpine Channel Divider PRA-H400
is connected, you can control the Divider from the
IVX-C806/IVX-M706/CVA-1006R.
Use this procedure when one or two 2-waysystem or 3-way system channel dividers are
connected.
1
2
3
Press the rotary encoder repeatedly to select the
position (seat) you wish to adjust.
Each press changes the seat positions as
follows:
→ Fr/Left → Fr/Righ → Rear/Left → Rear/Right
6
Rotary encoder
Rotate the rotary encoder clockwise or
counterclockwise to increase or decrease the
Time-Correction value respectively to your
desired value.
When adjustment has been completed, press the
FUNC (RETURN) button. The display returns to
the Time-Correction mode screen.
Tip
When the FUNC (RETURN) button is pressed, the
display returns to the previous screen.
34-EN
4
5
Press the SOURCE button.
The main menu screen appears on the display.
Press the 4 (A.PROC) button.
The display shows the Audio Processor list
screen.
Rotate the rotary encoder and select the
"Divider" (when one divider is connected) or
"Divider-F and Divider-R" (when two dividers are
connected), then press the rotary encoder to
execute the selection.
The display changes to the Divider mode screen.
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The mode changes to the Divider Adjustment
mode.
Press the 1 (X-OVER) button. The mode
changes to the Cross-Over Adjustment mode.
6
Press the rotary encoder and select the channel
that you wish to adjust.
Each press changes the channel as follows.
Adjusting Levels
1
When only one 2-way divider is connected:
→ Low → F-High → R-High
When two 2-way dividers are connected:
→
→
Low
→
High
2
3
→
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→
Low
→
Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
Press the 2 (LEVEL) button. The mode changes
to the Level Adjustment mode.
Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way system divider is
connected:
→ L-Low → R-Low → F-High/L
R-High/R ← R-High/L ← F-High/R ←
High
When two 2-way system dividers are
connected:
When only one 3-way divider is connected:
→ Low → Mid-L → Mid-H → High
→
→ L-Low → R-Low → L-High → R-High
When two 3-way dividers are connected:
→
→
→ Low → Mid-L → Mid-H → High
→
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment, and the
display also changes.
→ L-Low → R-Low → L-High → R-High
When only one 3-way divider is connected:
→ Low → Mid-L → Mid-H → High
8
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
Rotate the rotary encoder clockwise or
counterclockwise to adjust the Cross-Over point
upward or downward to your desired point.
When two 3-way dividers are connected:
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
When the adjustment has been completed, press
the FUNC (RETURN) button. The display returns
to the Divider mode screen.
→
7
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment, and Rear adjustment modes,
and the display also changes.
→
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
4
5
Rotate the rotary encoder clockwise or
counterclockwise to adjust to your desired level
upward or downward respectively.
When adjustments have been completed, press
the FUNC (RETURN) button.
The display returns to the Divider mode.
35-EN
Audio Processor Operation (Optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Function buttons
(1 through 6)
3 4 6
Function buttons
(1 through 6)
3 4 6
FUNC
FUNC
SOURCE
SOURCE Rotary encoder
Rotary encoder
Adjusting Time-Correction for
2-Way Speaker System
When two 3-way dividers are connected:
→
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
1
2
3
→
Use this procedure to adjust the sound time
difference between the speakers.
Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
4
Press the 3 (T-CORR.) button.
The mode changes to the Time Correction
Adjustment mode.
5
Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way divider is connected:
→ L-Low → R-Low → F-High/L
R-High/R ← R-High/L ← F-High/R ←
When two 2-way dividers are connected:
→
→ L-Low → R-Low → L-High → R-High
→
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→ L-Low → R-Low → L-High → R-High
When only one 3-way divider is connected:
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
36-EN
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
Rotate the rotary encoder clockwise or
counterclockwise to adjust the time correction
value upward or downward respectively.
When adjustments have been completed, press
the FUNC (RETURN) button.
The display returns to the Divider mode screen.
Memorizing Divider Settings
You can store your settings of the divider(s) in
memory when you have adjusted them.
1
2
After adjusting the divider(s), display the Divider
mode screen.
Press and hold any one of the Function buttons
1 (P.SET1) through 4 (P.SET4) for at least 2
seconds.
The indicators for the 4 buttons blink for 5
seconds.
While the indicators are still blinking, press the
Function button into which you want to
memorize (preset) the divider settings.
Repeat the above steps to memorize 3 other
divider settings.
Recalling Memorized Divider
Settings Using Function Buttons
1
Display the Divider mode screen.
Press the Function button 1 (P.SET1) through
4 (P.SET4) that has your desired divider
settings.
The divider setting stored at the Function button
will be recalled.
Tip
You can also recall your desired divider settings
memorized by pressing the 4 (;P.DN) or 5 (:P.UP)
button in the Divider mode.
Recalling Divider Settings
Memorized Using Optional Divider
4
5
Press the Function button 1 (P.SET1) through
6 (P.SET6) that has your desired setting
memorized using the optional divider.
Press the FUNC (RETURN) button.
The display returns to the main menu screen.
Memorizing Characteristic Curves
Equalization characteristic curves created by
yourself or factory preset can be stored in
memory. (See page 29.)
1
2
3
Select one of the factory preset characteristic
curves or make your own (personal)
characteristic curve. Then, display the Audio
Processor List and select "Private Memo."
Press and hold any one of the Function buttons
1 (P.SET1) through 6 (P.SET6) for at least 2
seconds.
The Function Guide indicators P.SET1 through
P.SET6 in the preset mode display blink
indicating that you can memorize the
characteristic curve.
While the Function Guide indicators are blinking,
press the Function button 1 (P.SET1) through
6 (P.SET6) into which you wish to memorize the
characteristic curve.
Now, the characteristic curve has been
memorized.
Repeat this procedure to memorize other
characteristic curves.
NOTE
This unit can memorize curves together with the settings
of the equalizer, DHE, BBE and Surround Time
Correction.
If an optional Alpine divider (such as PXA-H600/
PXA-H510) is connected, you can recall the
settings memorized using the optional divider.
1
2
3
Press the SOURCE button.
The main menu is displayed on the display.
Press the 4 (A.PROC) button.
The Audio Processor List screen is displayed.
Rotate the rotary encoder and select "Adaptive
EQ." The Function Guide screen is displayed.
37-EN
Audio Processor Operation (Optional)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Function buttons
(1 through 6)
Function buttons
(1 through 6)
Rotary encoder
Recalling Memorized
Characteristic Curves Using
Function Buttons
1
Activate the desired mode, DHE, BBE, surround,
time correction or equalizer, then press the
Function button 1 (P.SET1) through 6 (P.SET6)
that has your desired characteristic curve.
The selected characteristic curve is recalled.
Rotary encoder
Selecting Characteristic Curves
from Displayed Audio Processor
List
You can select your desired characteristic curves
directly from the Audio Processor (A.PROC) List
without switching to individual mode screens.
1
2
38-EN
Display the Audio Processor List screen.
Rotate the rotary encoder and select the desired
mode by moving the cursor. The Function Guide
for the selected mode is displayed.
Press the Function buttons 1 through 6 that
has your desired characteristic curve. The list
shows the details of the curve selected.
Other Useful Features
1
6
(IVX-C806)
SPE.ANA.
Displaying Spectrum Analyzer
(IVX-C806 only)
Mode 3: This mode emphasizes the rhythmical
bass sound and gives an image of vivid
low frequencies.
Depending on the external audio processor
connected to the unit, this function may not work
properly.
1
2
While the main screen for a music source is
displayed, press the SPE.ANA. button to turn on
the spectrum analyzer mode.
Each time you press the SPE.ANA. button, the
spectrum analyzer modes change. There are
three modes, select your desired mode to match
the music being played.
• SCAN Display
It displays mode1 to mode3 repeatedly.
3
To deactivate the spectrum analyzer mode,
press the SPE.ANA. button for at least 2
seconds.
Mode 1: This mode can be used for any genre
of music.
Mode 2: This mode is suitable to vocal song
music.
39-EN
Other Useful Features
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 23 4 5 6
1 2 3 4 5 6
SOURCE
SOURCE INPUT Rotary encoder
INPUT Rotary encoder
Displaying Spectrum Analyzer
(IVX-M706/CVA-1006R only)
Mode 3: This mode emphasizes the rhythmical
bass sound and gives an image of vivid
low frequencies.
Depending on the external audio processor
connected to the unit, this function may not work
properly.
1
2
3
4
Press the SOURCE button.
The main menu appears in the display.
• SCAN Display
It displays mode 1 to mode 3 repeatedly.
Press the 6 (SETUP) button.
The Setup mode screen is displayed.
5
Rotate the rotary encoder and select "SPE.
ANA."
The Function Guide menu appears in the display.
Turning Defeat Mode On and Off
Press any one of the buttons 3 (MODE 1)
through 5 (MODE 3), your desired mode to
match the music being played.
Mode 1: This mode can be used for any genre
of music.
When the defeat mode is on, the sound signals
bypass the BBE and surround circuits and directly
go to the line output. The equalizer curve,
therefore, becomes flat.
1
2
Mode 2: This mode is suitable to vocal song
music.
40-EN
To deactivate the spectrum analyzer mode,
press the 1 (OFF) button.
3
4
Press the SOURCE button. The main menu
screen appears on the display.
Press the 4 (A.PROC) button. The display
shows the Audio Processor List screen.
Rotate the rotary encoder and select "Defeat."
The Function Guide is displayed.
Press the 2 (ON) button to turn on the defeat
mode. The sound signals bypass the BBE and
surround circuits.
To turn off the defeat mode, press the 1 (OFF)
button.
Titling CDs
You can title up to 120 CDs (max.).
Immediately after inputting titles or changing the
settings of Initialize Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
NOTE
The Parking Brake must be engaged to access the TITLE
INPUT mode screen. Attempting to access this screen
while driving will display the warning-CAN'T OPERATE
WHILE DRIVING.
1
2
3
4
5
6
Activate the CD mode.
Play a CD that you want to title (name).
Press and hold the INPUT button for at least 2
seconds.
The Title Inputting screen appears in the display.
Characters are displayed at the bottom menu.
Rotate the rotary encoder and select the desired
character for the first position.
To change between upper case, lower case,
numeral and symbol, press the 3 (A/1) button.
Each press changes the bottom menu.
NOTES
• If the memory capacity for CD titles is full and if you
attempt to title a new CD, the oldest title will be
erased to make room for the new one. To delete a title,
select the title you want to delete, then select "SPC"
(space) and press the 6 (WRITE) button.
• When the 1 (; BACK) or 2 (NEXT -) button is
pressed, the cursor moves to the left or right on the
input titles.
• If an incorrect character has been entered, select
"SPC" (space) and input a new character, or press the
4 (DELETE) button to delete the previous character.
Press the 5 (CLEAR) button while inputting the titles
to erase all the characters you have input.
• Pressing the FUNC (RETURN) button in the Title
Input mode changes the display back to the previous
display.
• You can title the VIDEO CD/CD while it is in DVD or
DVD changer mode. The title you entered is displayed
in the Disc Title List display (P. 25)
(Do not operate while driving. Stop the car, then use
this operation.)
• When the DVA-5205P is connected:
To display the title input screen, switch to the DVD
main screen mode and press and hold the INPUT
button for at least 2 seconds while playing the video
CD or CD.
To display the list of disc titles, switch to the DVD
main screen mode and press the LIST button while
playing the video CD or CD.
When the character for the first position has
been selected, press the rotary encoder. The first
character has been memorized at the first
position. See "Notes" on page.
Repeat steps 3 and 4 to enter the rest of
characters. You can input up to 12 characters for
titling one CD.
When titling has been completed, press the 6
(WRITE) button to store the title in memory.
The display changes to the CD mode.
The input titles will be displayed when a CD titled
is selected.
41-EN
Other Useful Features
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 2 3
6
1 2 3
FUNC
6
FUNC
SOURCE
SOURCE
Rotary encoder
Adjusting Subwoofer Level
(when subwoofer is used with
other speakers)
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
5
Press the SOURCE button.
The main menu appears on the display.
Press the 6 (SETUP) button.
The Setup mode screen is displayed.
Rotate the rotary encoder and select "Sub wf."
The Function Guide appears on the display.
Press the 2 (ON) button to turn on the
subwoofer.
To turn off the subwoofer, press the 1 (OFF)
button.
Press the rotary encoder repeatedly to select
"SUB W." Each press changes the modes as
follows:
→ SUB.W. → BAS. → TRE. → BAL. → FAD. → VOL.
42-EN
Rotary encoder
6
7
Rotate the rotary encoder and adjust the
subwoofer output level.
When your adjustment has been completed,
press the FUNC (RETURN) button.
The display returns to the main menu.
NOTES
• For further information, please contact your Alpine
dealer.
• When you connect a subwoofer, you need an amplifier
with built-in low-pass filter.∗
∗ The low-pass filter passes only the frequencies
below the selected cut-off frequency. Any high
frequency content of the audio signal above the cutoff will be removed.
• With the Setup screen displayed, pressing and rotating
the rotary encoder can adjust the volume level.
Switching Phase
Use the phase-switching function after connecting
your audio-processor, amplifier and subwoofer to
the IVX-C806/IVX-M706/CVA-1006R.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
5
Press the SOURCE button.
The main menu appears on the display.
Press the 6 (SETUP) button.
The Setup mode screen is displayed.
Rotate the rotary encoder and select "Sub Wf."
The Function Guide is displayed.
Setting the External Device
Interrupt Mode
If an Alpine Ai-NET Interrupt Box (NVE-K200) is
connected to the IVX-C806/IVX-M706/CVA-1006R,
an Auxiliary Source will be allowed to interrupt the
current audio source. For example, you can listen
to the voice guidance of your navigation system
when it occurs even while you are playing a CD or
MD. The CD/MD player will be automatically muted
during voice guidance. For further details, please
refer to the manual for NVE-K200.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
Press the 2 (0°) or 3 (180°) button to switch
the phase of the subwoofer output.
1
To turn off this function, press the 1 (OFF)
button.
2
When setting has been completed, press the
FUNC (RETURN) button.
The display returns to the main menu screen.
3
4
Press the SOURCE button.
The main menu screen appears on the display.
Press the 6 (SETUP) button.
The Setup mode screen appears on the display.
Rotate the rotary encoder and select "IN-INT
MUTE" from the Setup mode screen. The
Function Guide appears on the display.
Press the 1 (OFF) button to turn off the mute
mode.
In the mute OFF mode:
The volume level can be adjusted in the
interrupt mode.
NOTE
When the mute ON mode is selected, sound will not
produce.
5
When your setting has been completed, press
the FUNC (RETURN) button.
The display returns to the main menu.
NOTE
The Auxiliary device being connected, must have an
Interrupt wire with a positive trigger, for this function to
operate automatically. Otherwise, a separate switch
needs to be added to switch manually.
43-EN
Other Useful Features
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Function buttons
(1 through 4)
Function buttons
(1 through 4)
1 2 3
6
1 2 3
FUNC
6
FUNC
SOURCE
V.SEL
SOURCE
Rotary encoder
Setting Interrupt Icon Display
(IN-INT)
The unit can display the icon of the external
device such as a telephone whenever a phone
call comes in to tell you there is a phone call.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
Press the SOURCE button.
The main menu appears on the display.
V.SEL
Interrupt Feature (MIX LEVEL)
With an Alpine navigation system connected to
the IVX-C806/IVX-M706/CVA-1006R, the voice
guidance of the navigation system will be mixed
with the radio or CD/MD play. You can adjust the
volume level of the voice guidance.
You cannot use this function with an external
amplifier.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
Press the 6 (SETUP) button.
The Setup mode screen appears.
1
Rotate the rotary encoder and select "IN-INT."
The Function Guide is displayed.
2
Press 1 (TEL) button.
When the external device (telephone) sends the
interrupt signal, the telephone icon appears on
the display.
When the 2 (INT.) button is pressed, the INT
icon appears on the display.
3
4
5
44-EN
Rotary encoder
Press the SOURCE button.
The main menu screen appears on the display.
Press the 6 (SETUP) button.
The Setup mode screen appears.
Rotate the rotary encoder and select "MIX
LEVEL."
The Function Guide is displayed.
Press the 2 (DOWN) or 3 (UP) button to adjust
the volume level of the navigation system's voice
guidance in 7 steps.
To turn off the navigation interrupt mode, press
the 1 (OFF) button.
Press the FUNC (RETURN) button to return to
the main menu screen.
NOTES
• When the voice guidance of the Navigation system
starts to interrupt the audio the display is
automatically changed to the navigation screen.
• The volume level of the audio will be automatically
reduced when the voice guidance of the Navigation
system starts.
Setting Bass Frequency
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
5
Setting Visual Mode
For direct access to the different visual screens,
preset to the Navigation or V. SEL. You can then
display the screen of the preset item by just
pressing the V. SEL button on the IVX-C806/IVXM706/CVA-1006R.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
NOTE
When an equalizer or digital sound processor is
connected, this function is inoperative.
2
Press the SOURCE button.
The main menu appears on the display.
3
Press the 6 (SETUP) button.
The Setup mode screen appears.
4
Rotate the rotary encoder and select "BASS
Cont." to activate the Bass Control mode.
Press the Function button 1 (60 Hz) through
4 (100 Hz) that has the frequency you wish to
control.
Press the FUNC (RETURN) button.
The display returns to the main menu screen.
Press the SOURCE button.
The main menu screen appears on the display.
Press the 6 (SETUP) button.
The Setup mode screen appears.
Rotate the rotary encoder and select "VISUAL."
The Function Guide is displayed.
Press the 1 (NAV.) or 2 (V. SEL) to preset the
desired item.
• When "NAVI" is preset: Pressing the V. SEL
button directly switches to the navigation
screen.
• When "V. SEL" is preset: Each press of the
V. SEL button switches the modes;
→ NAV. → AUX1 → AUX2 → DISPLAY
45-EN
Other Useful Features
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 2 3 4 6
FUNC
1 2 3 4 6
FUNC
SOURCE
SOURCE
Rotary encoder
Selecting Rear Monitor
If a rear-seat monitor and a navigation system are
connected to the IVX-C806/IVX-M706/CVA-1006R,
you can switch the picture/sound of the rear-seat
monitor from the IVX-C806/IVX-M706/CVA-1006R.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
Press the SOURCE button.
The main menu appears on the display.
Press the 6 (SETUP) button.
The Setup mode screen appears.
Rotate the rotary encoder and select "AUX
OUT."
The Function Guide is displayed.
Press the 1 (NAV.) button, the navigation
screen will be displayed and the voice guidance
will be produced on the rear-seat monitor if the
navigation system is connected.
• When the 2 (AUX1) button is pressed, the
device connected to Terminal AUX 1 will be
played on the rear-seat monitor and the
monitor produces picture and sound.
• When the 3 (AUX2) button is pressed, the
device connected to Terminal AUX 2 will be
played on the rear-seat monitor and the
monitor produces picture and sound.
46-EN
Rotary encoder
NOTES
• If the DVD player or DVD changer is connected to the
AUX1 terminal, operate the above four steps when the
DVD picture has been produced in steps 1 through 3 in
“Playing 2 Sources Simultaneously” on page 53.
DVD picture and sound will come from the rear seat
monitor.
• To deactivate the mode, press the same button.
• If no particular picture is selected for the rear-seat
monitor in the AUX OUT mode, the rear-seat monitor
displays the same picture as for the IVX-C806/IVXM706/CVA-1006R.
Displaying Time
6
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
5
Press the SOURCE button.
The main menu appears on the display.
Press the 6 (SETUP) button.
The Setup mode screen appears.
Rotate the rotary encoder and select "CLOCK
DISP."
The Function Guide appears.
Press the 1 (OFF) or 2 (ON) button to turn off
or on the clock display respectively.
Press the FUNC (RETURN) button.
The display returns to the main menu screen.
Resetting Clock
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
Press the SOURCE button.
The main menu appears on the display.
Press the FUNC (RETURN) button after
adjusting the clock.
The display returns to the main menu screen.
NOTE
To quickly set the time to the nearest hour, press the 5
(TIME RESET) button. If the displayed time is before the
half hour, pressing the 5 (TIME RESET) button sets the
clock back to the previous hour. If the displayed time is
after the half hour, pressing the 5 (TIME RESET)
button sets the clock forward to the beginning of the next
hour.
Setting Daylight Saving Time
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
5
Press the SOURCE button.
The main menu screen is displayed.
Press the 6 (SETUP) button. The Setup screen
is displayed.
Rotate the rotary encoder and select "Summer
Time." The Function Guide is displayed.
Press the 2 (ON) button to place the Summer
Time mode ON.
The time advances by one hour.
To return to the ordinary time, press the 1
(OFF) button.
Press the FUNC (RETURN) button.
The display returns to the main menu screen.
Press the 6 (SETUP) button.
The Setup mode screen appears.
Rotate the rotary encoder and select "CLOCK
ADJ." to activate the clock adjustment mode.
The Function Guide appears.
4
Press the 1 ( DN) or 2 (UP ) button to
delay or advance the hours respectively.
5
Press the 3 ( DN) or 4 (UP ) button to
delay or advance the minutes respectively.
47-EN
Other Useful Features
OPEN/CLOSE
1 2 3
OPEN/CLOSE
1 2 3
5 6
5 6
FUNC
FUNC
SOURCE
(IVX-C806)
SOURCE
Rotary encoder
Sound (Beep) Guide Function
This function will give audible feedback with
varying tones depending upon the button
pressed.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
5
Press the SOURCE button.
The main menu appears on the display.
Press the 6 (SETUP) button.
The Setup mode screen appears.
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in) Rotary encoder
Demonstration
In the Demonstration mode, the unit performs
scanning of the basic operation of each source.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
Rotate the rotary encoder and select "BEEP."
The Function Guide is displayed.
Press the 2 (ON) button to activate the Sound
Guide mode. The display shows "BEEP ON."
Press the 1 (OFF) button to deactivate the
Sound Guide mode. The sound guide beep will
not be produced when a button on the unit is
pressed.
When the setting has been completed, press the
FUNC (RETURN) button.
The display returns to the main menu screen.
48-EN
4
Press the SOURCE button.
The main menu appears on the display.
Press the 6 (SETUP) button.
The Setup mode screen appears.
Rotate the rotary encoder and select "DEMO" to
activate the Demonstration Selection mode.
The display shows the Function Guide screen.
Press the 2 (ON) button to activate the
Demonstration mode. When the Demonstration
mode is activated, the unit automatically starts
the demonstration (simulation). The
demonstration continues until the demonstration
mode is deactivated.
To deactivate the demonstration mode, press the
1 (OFF) button. The demonstration stops.
Setting Automatic Opening/
Closing of Monitor
When the Automatic Opening/Closing mode is
"ON," the monitor automatically opens when the
ignition key is turned to the "ACC" or "ON"
position. The monitor automatically closes when
the ignition key is turned OFF.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
5
Adjusting Brightness of Picture
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
NOTE
The Parking Brake must be engaged to access the
display mode screen. Attempting to access this screen
while driving will display the warning-CAN’T
OPERATE WHILE DRIVING.
1
Press the SOURCE button.
The main menu appears on the display.
2
Press the 6 (SETUP) button.
The Setup mode screen appears.
3
Rotate the rotary encoder and select "AUTO
OPEN."
The display shows the Function Guide.
4
Press the 2 (ON) button to set the Auto
Opening mode ON.
To set the Auto Opening mode OFF, press the 1
(OFF) button. If set to the "OFF" position, the
monitor should be manually opened or closed by
pressing the OPEN/CLOSE button.
Press the FUNC (RETURN) button, the display
returns to the main menu screen.
5
Press the SOURCE button.
The main menu appears on the display.
Press the 5 (DISPLAY) button.
The Display mode screen appears.
Rotate the rotary encoder and select "BRIGHT"
to activate the Brightness Adjustment mode.
The display shows the Function Guide.
Press the 1 (; DARK) to make the picture
darker or press the 3 (LIGHT :) to make the
picture brighter. You can adjust the brightness
between MIN (–15) and MAX (+15). When it
reaches the minimum or maximum point, the
display shows "MIN" or "MAX" respectively. To
quickly set to the centre position, press the 2
(±0) button.
When the adjustment has been completed, press
the FUNC (RETURN) button. The display returns
to the main menu screen.
NOTE
With the Display mode screen displayed, pressing and
rotating the rotary encoder can adjust the volume level.
49-EN
Other Useful Features
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Function buttons
(1 through 6)
Function buttons
(1 through 6)
1 2 3
1 2 3
5
5
FUNC
FUNC
SOURCE
SOURCE
Rotary encoder
Adjusting Tint of Picture
Rotary encoder
Adjusting Colour of Picture
Tint adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes.
Tint adjustment cannot be made if a Navigation
system with the RGB feature is connected.
Colour adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes.
Colour adjustment cannot be made if a Navigation
system with the RGB feature is connected.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
Rotate the rotary encoder while the DISPLAY
mode screen is displayed and select "TINT" to
activate the Tint Adjustment mode. The Function
Guide is displayed.
Press the 1 (; GRN) button to adjust green and
press the 3 (RED :) button to adjust red. To
quickly set to the centre position, press the
2 (±0) button.
1
2
When the tint adjustment has been completed,
press the FUNC (RETURN) button. The display
returns to the main menu screen.
3
50-EN
Rotate the rotary encoder while the DISPLAY
mode screen is displayed and select "COLOR" to
activate the colour adjustment mode. The
Function Guide is displayed.
Press the 1 (; THIN) or 3 (THICK :) button to
make the colour of the picture brighter or darker
respectively to get your desired colour. You can
adjust the colour between MIN (–15) and MAX
(+15). When it reaches the minimum or
maximum point, the display shows "MIN" or
"MAX" respectively. To quickly set to the centre
position, press the 2 (±0) button.
When the adjustment has been completed, press
the FUNC (RETURN) button. The display returns
to the main menu screen.
Illumination Control
Setting the illumination control to AUTO,
decreases the illumination brightness of the IVXC806/IVX-M706/CVA-1006R, whenever the
parking lamps of the vehicle are ON.
Use this function if you feel the unit’s illumination
is too bright at night.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
5
Switching Background Textures/
Colours
You have a choice of 12 different background
textures/colours preset at the factory. Select them
following the procedure below.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
Press the SOURCE button.
The main menu appears on the display.
Press the 5 (DISPLAY) button.
The Display mode screen is displayed.
2
Rotate the rotary encoder and select "DIMMER."
The Function Guide is displayed.
• Press the 3 (AUTO) button to activate the
Auto Dimmer mode. In the Auto Dimmer mode,
the background illumination of the monitor is
synchronized with the instrument illumination
of the vehicle (the dimmer input lead should be
connected).
• Press the 1 (OFF) button to deactivate the
Auto Dimmer mode to keep the background
illumination of the monitor bright.
• Press the 2 (ON) button to keep the
background illumination of the monitor dark.
When the setting has been completed, press the
FUNC (RETURN) button.
The display returns to the main menu screen.
Rotate the rotary encoder while the Display
mode screen is displayed and select "B.GND
TEXTURE" or "B.GND COLOR." The Function
Guide appears on the display.
Press the Function buttons (1 through 6) that
has your desired texture.
The Function buttons have textures/colours as
follows.
B.GND TEXTURE
B.GND Colour
MARBLE
C1
2
SKY
C2
3
WOOD
C3
4
GRAD.
C4
5
METAL
C5
6
ABYSS
C6
1
The background colour changes with respect to
the selected texture.
3
When your selection has been made, press the
FUNC (RETURN) button.
The display returns to the main menu screen.
51-EN
Other Useful Features
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
1 2 3
1 2 3
5
5
SOURCE
V.SEL
SOURCE
Rotary encoder
Setting Automatic Background
Texture/Colour Scroll
Turn on the Automatic Background Texture/colour
Scroll to automatically change background
texture/colours. The background texture/colour will
change each time the ignition key is turned off
and turned back on again (12 textures/colours).
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
2
3
4
Press the SOURCE button.
The main menu appears on the display.
Press the 5 (DISPLAY) button to activate the
Display mode.
The Display mode screen appears.
Rotate the rotary encoder and select "AUTO
B.GND."
The Function Guide is displayed.
Press the 2 (ON) button to turn on the Auto
Background Texture/colour Scroll mode.
To turn off the Auto Background Texture/colour
Scroll mode, press the 1 (OFF) button.
The background textures/colours will scroll when
the ignition key is turned off once and turned
back on again as follows:
→ MARBLE → SKY → WOOD → GRAD. → METAL
C6 ← C5 ← C4 ← C3 ← C2 ← C1 ← ABYSS ←
52-EN
V.SEL
Rotary encoder
Switching Display Modes
1
Press and hold the V.SEL button for at least 2
seconds in the AUX or NAVI mode.
Each press changes the display modes as
follows:
→ MODE 1 → MODE 2 → MODE 3 → MODE 4
(WIDE)
(ZOOM) (CINEMA) (NORMAL)
MODE1
In the Mode 1 (Wide), the monitor displays a
normal picture wider to fit in the wide-screen
monitor by evenly stretching out the picture
horizontally.
MODE2
In the Mode 2 (Zoom), the monitor displays a
normal picture wider to fit in the wide-screen
monitor by unevenly stretching out. The centre
portion of the picture is stretched out only slightly
in order to make the important centre portion of
the picture look natural.
(Example)
MODE3
Picture→ NAV → NAV →
Voice
NAV
RADIO
NAV ←
NAV ←
AUX2
AUX1*
NOTE
Operative only when the video source is DVD,
Navigation, AUX1 or AUX 2.
In the Mode 3 (Cinema), the monitor displays a
normal picture by stretching out the picture
horizontally and vertically. This mode is good for
displaying a cinema type picture with the
proportion of 16 to 9.
To change only the video portion while listening
to the current audio source:
Press the 3 (V.SEL) button to select the video
portion.
(Example)
MODE4
Picture→ RADIO
Voice
RADIO
In the Mode 4 (Normal), the monitor displays
normal picture at the centre of the screen with a
vertical black belt at each side.
You can listen to the audio portion of another
source while watching the picture of current
source, or you can watch the video portion of
another source while listening to current source.
2
Press the SOURCE button.
The main menu appears on the display.
To change only the audio portion while watching
the current video source:
Press the 2 (A.SEL) button to select the audio
portion.
→
NAV → AUX1*
RADIO
RADIO
AUX2 ←
RADIO
∗ If a DVD player is connected, the DVD picture
will be displayed and the voice will be
produced.
With the DVD player (DVA-5205P) or DVD
Changer (DHA-S680P) connected, pressing
and holding the V. OUT button on the remote
control supplied with the DVD player or DVD
Changer for more than 2 seconds the picture
and voice of the DVD.
Playing 2 Sources Simultaneously
1
NAV
TAPE
NAV
CHG
3
Rotate the rotary encoder and select your
desired audio source or video source, and press
the rotary encoder to execute the selection.
53-EN
Remote Control Operation
1
2
3
4
5
6
7
8
9
!
"
#
Controls on Remote Control
1 Power Button
Press the button to turn the power on/off.
2 Source Button
Press to select the audio source.
3 -/J Button
Press and hold this button for more than 2 seconds
to play or pause (In CD/MD/Changer mode).
Enter Button
• Press to execute the selection. (The same
function as the rotary encoder on IVX-M706/
IVX-C806/CVA-1006R.)
• Pressing and holding this button for more than
2 seconds turns the loudness on or off (when
neither an equalizer nor a digital sound
processor is connected).
4 ANGLE 89 Buttons
Press the button to adjust the angle of the
movable display.
5 Band/Programme Button
Radio mode: BAND Button
Press the button and the band will change as
shown below.
→ FM1 → FM2 → FM3 → MW → LW
Changer mode: BAND Button
Switches changers (when a Multi-Changer
Switching device is connected).
6 Volume Adjustment Buttons
To increase the volume level:
Press the L button
To decrease the volume level:
Press the K button
The buttons have the same functions as rotating
the rotary encoder on IVX-M706/IVX-C806/CVA1006R.
54-EN
7 8 Button
Radio mode: Pressing the button will select, in
ascending order, stations programmed into the
radio's presets as shown below.
→ 1 → 2 ... 6
CD/DVD Changer mode: DISC Select (UP) Button
Press the button to select a disc in ascending order.
8 g Button
Radio mode: SEEK (DN) Button
CD/CD Changer mode: Press the button to go
back to the beginning of the current track.
Audio Processor Mode:
• When the main menu is displayed:
After pressing the A.PROC button, tilt the
button to select the factory preset curves in the
selected mode.
• When the adjustment mode screen is displayed:
Tilt to select the personal preset curves.
9 f Button
Radio mode: SEEK (UP) Button
CD/CD Changer mode: Press the button to
advance to the beginning of the next track.
Audio Processor Mode:
• When the main menu is displayed:
After pressing the A.PROC button, tilt the
button to select the factory preset curves in the
selected mode.
• When the adjustment mode screen is displayed:
Tilt to select the personal preset curves.
! 9 Button
Radio mode: Pressing the button will select, in
descending order, stations programmed into the
radio's presets as shown below.
→ 6 → 5 ... 1
CD/DVD Changer mode: DISC Select (DN) Button
Press the button to select a disc in descending
order.
" Mute Button
• Press the button to lower the volume by 20 dB
instantly. Press the button again to cancel.
• Press the button for at least 2 seconds to raise
the monitor. Press the button again to lower the
monitor.
# Audio Processor Button∗∗
Press the button to call the external audio
processor mode.∗
∗ For the operation of external audio processor, refer to the
Owner's Manual of the external audio processor you
purchased.
∗∗ This button is used in conjunction with an optional AiNET processor.
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
(IVX-C806)
Remote sensor
Battery Replacement
Remote sensor
2
Applicable battery: Use two “AAA” sized dry
batteries or equivalent.
Replacing the battery
Put the batteries in the case observing the
polarities as illustrated.
• Point the remote control transmitter toward the remote
sensor on the IVX-C806/IVX-M706/CVA-1006R and use
the remote control within 2 meters from the IVX-C806/
IVX-M706/CVA-1006R.
1
Opening the battery cover
Slide out the battery cover while firmly pressing
the direction of arrow.
3
Closing the cover
Push the cover as illustrated until a click is
heard.
55-EN
Information
In Case of Difficulty
If you encounter a problem, please review the
items in the following checklist. This guide will
help you isolate the problem if the unit is at fault.
Otherwise, make sure the rest of your system is
properly connected or consult your authorized
Alpine dealer.
Basic
No function or display.
• Vehicle’s ignition is off.
- If connected following instructions, the unit will not
operate with the vehicle’s ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace
with the proper value if necessary.
• Internal micro-computer malfunctioned due to
interference noise etc.
- Press the Reset button with a ball-point pen or other
pointed article.
• Weak or no battery power.
- Check battery.
No sound or unnatural sound.
• Incorrect setting of volume/balance/fader controls.
- Readjust the controls.
• Connections are not properly or securely made.
- Check the connections and firmly connect.
Screen not displayed.
• Brightness control is set at the minimum position.
- Adjust the Brightness control.
• Temperature in the vehicle is too low.
- Increase the vehicle's interior temperature to operation
temperature range.
• Connections to the DVD, CD player, navigation system
are not securely made.
- Check the connections and firmly connect.
Movement of displayed picture is abnormal.
• Temperature in the vehicle is too high.
- Allow the vehicle's interior temperature to cool.
Unclear or noisy display.
• Fluorescent plate is worn out.
- Replace the fluorescent plate.
Navigation system inoperative.
• Connections with the navigation system are improper.
- Check the connections with the navigation system and
connect the cables correctly and firmly.
Unclear picture display.
• Fluorescent tube is exhausted.
- Replace the fluorescent tube*.
* The fluorescent tube replacement is not free of charge
even within the warranty period, for the tube is an
article of consumption.
56-EN
Radio
Unable to receive stations.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the
antenna may not be grounded and connected properly.
- Check your antenna connections; make sure the
antenna is properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken,
replace the antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its
mounting location.
• The station signal is weak and noisy.
- If above solution does not work, tune in another station.
CD (IVX-C806 only)
CD playback sound is wavering.
• Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate
(about 1 hour).
CD insertion not possible.
• A CD is already in the CD player.
- Eject the CD and remove it.
• The CD is being improperly inserted.
- Make sure the CD is being inserted following
instructions in the CD Player Operation section.
Unable to fast forward or backward the CD.
• The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in
your unit can cause damage to the mechanism.
CD playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
CD playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
MD (IVX-M706 only)
The MD could not be inserted.
• Another MD is already inserted.
- Eject the inserted MD and insert the MD.
• The MD is inserted incorrectly.
- Insert the MD correctly.
Sound skips due to vibration.
• Improper mounting.
- Securely re-mount the unit.
Sound skips without vibration.
• Dirty or scratched MD. Bad recording condition.
- Change the MD.
The play back won’t start.
• Dirty or scratched MD. Bad recording condition. A
non-recorded MD. Not a music MD.
- Change the MD.
• Dew condensation.
- Wait for a while before using.
The power turns on but the playback won’t start.
• The sound volume level of the head unit is adjusted to
minimum.
- Increase the sound volume of the head unit.
Indication for CD Player (IVX-C806 only)
HI-TEMP
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
NO DISC
• No CD is inserted.
- Insert a CD.
• Although a disc is inserted, “NO DISC” is displayed
and the unit does not start to play or eject the disc.
- Remove the disc by following these steps:
1) Press the c button.
The movable display will open.
2) Press the c button again for at least 3 seconds while
the movable display is open.
ERROR
• Mechanism error.
1) Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting,
press the c button again.
If the error indication still does not turn off after
pressing the c button for a few times, consult your
Alpine dealer.
NOTE
When the “ERROR” is displayed:
In case that the disc cannot be ejected by pressing the c
button, press the RESET switch (refer to page 8) and press
the c button again.
If not ejecting, consult your Alpine dealer.
57-EN
Information
Indication for MD Player (IVX-M706 only)
NO DISC
• No MD is inserted.
- Insert an MD.
ERROR
• No recording on disc (blank disc).
- Load disc after recording.
• Dirty or scratched MD, bad recording, a non recorded
MD, not a music MD.
- Press the MD c button and change the MD.
• The MD is inserted incorrectly.
- Press the MD c button and insert the MD correctly.
• Dew condensation.
- Wait a while.
• Mechanism error.
1. Press the MD c button and eject the MD.
If not ejecting, consult your Alpine dealer.
2. When the error indication remains after ejecting, press the
MD c button again.
If the error indication still does not turn off after pressing
the MD c button for a few times, consult your Alpine
dealer.
Indication for CD Changer (Optional)
HI-TEMP
• Temperature in the vehicle is too high.
- Allow the vehicle's interior temperature to cool.
The indicator will disappear when the temperature
returns to within operation range.
NO MAGAZINE
• No CD magazine is loaded into the CD Changer.
- Insert a magazine.
ERROR-01
• Malfunction in the CD Changer.
- Consult your Alpine dealer.
Press the magazine eject button and pull out the
magazine. Check the indication and insert the
magazine again. If the magazine cannot be pulled out,
consult your Alpine dealer.
• Magazine ejection not possible.
- Press the magazine eject button.
If the magazine does not eject, see the Owner's
Manual for the CD Changer.
HI-TEMP
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
58-EN
ERROR-02
• A disc is left inside the CD Changer.
- Press the EJECT button to activate the eject function.
When the CD Changer finishes the eject function,
insert an empty CD magazine into the CD Changer to
receive the disc left inside the CD Changer.
Specifications
MONITOR SECTION
GENERAL
Screen Size
6.5"
LCD Type
Transparent type TN LCD
Operation System
TFT active matrix
Number of Picture Elements 336,960 pcs. (1,440 × 234)
Effective Number of Picture Elements
99.99% or more
Illumination System
U-shaped cold cathode
fluorescent tube
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
87.5 – 108.0 MHz
0.7 µV
11 µV
80 dB
66 dB
35 dB
14.4 V DC
(11–15 V allowable)
Operating temperature
+32°F to +113°F
(0°C to + 45°C)
Maximum Power Output
45 W × 4
Output Voltage
1,000 mV/10k ohms
Maximum Pre-Output Voltage 4 V/10k ohms
Bass
±15 dB at 30 Hz
Treble
±15 dB at 10 kHz
Weight (Monitor Section)
1.7 kg (3 lbs. 12 oz)
(Tuner Section)
1.6 kg (3 lbs. 8 oz)
CHASSIS SIZE (Monitor section)
Width
Height
Depth
178 mm (7")
50 mm (2")
156 mm (6-1/8")
CHASSIS SIZE (Tuner section)
MW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
Power Requirement
531 – 1,602 kHz
25.1 µV/28 dB
Width
Height
Depth
259 mm (10-13/64")
37 mm (1-7/16")
177.5 mm (6-15/16")
LW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
153 – 281 kHz
31.6 µV/30 dB
CD PLAYER SECTION (IVX-C806 only)
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
5 – 20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
95 dB
85 dB (at 1 kHz)
NOTES
• Due to continuous product improvement, specifications
and design are subject to change without notice.
• The LCD panel is manufactured using an extremely high
precision manufacturing technology. Its effective pixel
ratio is over 99.99%. This means that there is a possibility
that 0.01% of the pixels could be either always ON or
OFF.
MD PLAYER SECTION (IVX-M706 only)
Signal-to-Noise Ratio
Dynamic Range
Wow & Flutter (% WRMS)
Frequency Response
90 dB
90 dB (at 1 kHz)
Below measurable limits
20 – 20,000 Hz (±0.5 dB)
REMOTE CONTROL
Battery Type
Width
Height
Depth
Weight
AAA batteries (2 pcs.)
42 mm (1-21/32")
121 mm (4-25/32")
23 mm (29/32")
50 g (1.8 oz)
59-EN
Installation and Connections
Before installing or connecting the unit, please
read the following and pages 3 to 6 of this
manual thoroughly for proper use.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product
damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM
THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED
IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to prevent
obstructions when driving. Cables or wiring that obstruct or hang up
on places such as the steering wheel, gear lever, brake pedals, etc.
can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other equipment.
Doing so will exceed the current carrying capacity of the wire and
result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN
DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND
CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BOLTS OR
SCREWS OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT
HINDER VEHICLE OPERATION, SUCH AS THE
STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical skill
and experience. To ensure safety, always contact the dealer where you
purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL
THEM SECURELY.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not securely
install the unit in place. This may cause parts to become loose resulting
in hazards or product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat rails) or
sharp or pointed edges. This will prevent crimping and damage to the wiring.
If wiring passes through a hole in metal, use a rubber grommet to prevent the
wires insulation from being cut by the metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH
MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of moisture
or dust. Moisture or dust that penetrates into this unit may result in
product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your IVX-C806/IVX-M706/CVA-1006R. This will
reduce any chance of damage to the unit in case of a short-circuit.
• Be sure to connect the colour coded leads according to the diagram.
Incorrect connections may cause the unit to malfunction or damage
to the vehicle's electrical system.
• When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the IVX-C806/IVX-M706/CVA-1006R to
the fuse box, make sure the fuse for the intended circuit of the
IVX-C806/IVX-M706/CVA-1006R has the appropriate amperage.
Failure to do so may result in damage to the unit and/or the
vehicle. When in doubt, consult your ALPINE dealer.
• The IVX-C806/IVX-M706/CVA-1006R uses female RCA-type
jacks for connection to other units (e.g. amplifier) having RCA
connectors. You may need an adaptor to connect other units. If so,
please contact your authorized ALPINE dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
• The Display must be completely retracted in the casing when
installing. If it is not, problems may occur.
• When installing in automobiles, make sure the Display can open/
close without coming in contact with the shift lever.
IMPORTANT
Please record the serial number of your unit in the
space provided below and keep it as a permanent
record. The serial number plate is located on the
bottom of the unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
60-EN
Installation
Installing the Monitor
When your vehicle has the Bracket, mount the
long hex bolt onto the rear panel of the IVX-C806/
IVX-M706/CVA-1006R and put the Rubber Cap
on the hex bolt. If your vehicle does not have the
Mounting Support, reinforce the monitor unit with
the metal mounting strap (not supplied). Secure
the ground lead of the unit to a clean metal spot
using a screw (≤) already attached to the
vehicle’s chassis.
• Place of installation
Before determining the position of installation,
check that the display will not hamper gear
shifting when it is opened and closed in that
position.
NOTE
For the screw marked ≤≤, use an appropriate screw
for the chosen mounting location.
NOTE
Install at an angle of within 30 degrees from the
horizontal.
1
Bracket
Mounting
Sleeve
(Included)
Mounting
Bracket
(Included)
Hex Bolt
(Included)
Rubber Cap
(Included)
Screws
(M5x6)
(Included)
Washers
(Included)
Dashboard
Connect each input lead coming from an amplifier
or equalizer to the corresponding output lead
coming from the left rear of the IVX-C806/IVXM706/CVA-1006R. Connect all other leads of the
IVX-C806/IVX-M706/CVA-1006R according to
details described in the Connections section.
3
IVX-C806/
IVX-M706/
CVA-1006R
Slide mounting sleeve from main unit (see
Removal Procedure below). Slide the mounting
sleeve into the dashboard. Install the supplied
bracket to the monitor.
2
Screw
Hex Nut
(M5)
Bolt Stud
IVX-C806/
IVX-M706/
CVA-1006R
Metal
Mounting
Strap
Ground
Lead
Chassis
Front
Frame
(Included)
Lock Pin
Slide the IVX-C806/IVX-M706/CVA-1006R into
the dashboard. When the unit is in place, make
sure the locking pins are fully seated in the down
position. This can be done by pressing firmly in
on the unit while pushing the locking pin down
with a small screwdriver. This ensures that the
unit is properly locked and will not accidentally
come out from the dashboard. Install the
supplied Front Frame.
Removal
1. Use a small screwdriver (or similar tool) to push
the locking pins to the "up" position (see Step 3).
As each pin is unlocked, gently pull out on the
unit to make sure it does not re-lock before
unlocking the second pin.
2. Pull the unit out, keeping it unlocked as you do
so.
61-EN
Installation and Connections
<JAPANESE CAR>
When mounting with Screws
To install using the vehicle's genuine bracket.
When mounting the tuner with the screws, be sure to
choose a flat location.
When making holes, be careful not to scratch any
pipes or wires.
IVX-C806/
Ground Lead IVX-M706/
CVA-1006R
Screws
(M5x6)
(Included)
1
Connect the bracket to both the flanks of the
tuner with the supplied pan screws (M4x8).
Tuner
Mounting
Bracket
Bracket
(Included)
Installing the Tuner
Pan screws (M4x8) (Included)
When mounting with Velcro fasteners
When mounting the tuner with the Velcro fasteners,
be sure to choose a flat location.
Do not hang the unit from the bottom of the
dashboard or rear deck with the Velcro fasteners.
1
2
Install the tuner on the floor with the supplied
hexagon flange-head screws (M5x15).
Hexagon flange-head screws
(M5x15) (Included)
Placing the Velcro fasteners onto the Tuner.
Peel off the protective paper from the adhesive
side of the Velcro fasteners.
Attach two pieces of the Velcro fasteners (rough
textured) onto the bottom of the Tuner.
Tuner
Tuner
Velcro Fastener
2
Attach two pieces of the Velcro fasteners (soft
textured) onto the mounting location such as
under the front passenger's seat etc. Mount the
Tuner aligning the Velcro Fasteners.
62-EN
Parking Brake Lead Connection
If necessary, use a pinch connector to connect the parking brake lead, etc.
1
Vehicle Cable
2
Pinch Connector
Pliers
Monitor Cable
Stopper
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
ACC
IVX-C806/IVXM706/CVA-1006R
(Monitor and Tuner)
(Red)
SPST SW (Optional)
BATTERY
(Yellow)
Battery
NOTE
If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately).
If the switched power (ignition) lead of the IVX-C806/IVX-M706/CVA-1006R is connected directly to the positive (+) post of
the vehicle‘s battery, the IVX-C806/IVX-M706/CVA-1006R draws some current (several hundred milliamperes) even when
its switch is placed in the OFF position and the battery may be discharged.
Cautions for handling the I/F cord
The I/F cord is used to connect the monitor and the tuner BOX.
Press the LOCK button gently while removing the I/F cord out of the terminal. (See the illustration below.)
If you pull out the lock by force, the lock pins will be forced. This will cause a bad connection.
Some possible problems:
• The power of the unit turns off frequently.
• The display disappears.
• The monitor doesn’t open or close.
LOCK button
Pull out the cord before you unlock the pins.
63-EN
Installation and Connections
Connections (IVX-C806/IVX-M706/CVA-1006R Wiring Diagram)
ILLUMINATION
2
ILLM
(Orange)
3
BATTERY
6
To the instrument cluster
illumination lead
(Orange)
4
IVX-C806/
IVX-M706/
CVA-1006R
1
BATT
(Yellow)
(Yellow)
<Monitor>
7
!
5
GND
(Black)
GND
Antenna
(Black)
8
0
9
<Tuner>
fi
REMOTE OUT
AUX1
FM ANTENNA
@
AUX1
AUX2
(White/Brown)
R
#
AUDIO
L(MONO)
AUX INPUT
REMOTE OUT
AUX2
VIDEO
NAVIGATION INPUT
@
R
(White/Brown)
AUDIO
L(MONO)
^
REMOTE
TURN-ON
DISPLAY OUTPUT
REMOTE OUT
fl
#
AUX OUTPUT
VIDEO
Ai-NET
$
L
R
%
POWER SUPPLY
(Blue/White)
FRONT
REAR
6
AUDIO
SUB W.
POWER ANT
&
P.ANT
(Blue)
›
AUDIO
INTERRUPT IN
NORM
(Blue)
*
(
(Pink/Black)
EQ/DIV
PARKING
BRAKE
)
⁄
(Yellow/Blue)
ACC
¤
‹
BATTERY
ACC
(Red)
(Red)
3
(Yellow)
GND
5
(Black)
SPEAKER
LEFT
FRONT
SPEAKER
RIGHT
REAR
SPEAKER
RIGHT
FRONT
(White)
(White/
Black)
(Green/
Black)
(Green)
(Violet)
(Violet/
Black)
(Grey/Black)
(Grey/Black)
(Grey)
(Grey)
¢
£
™
¡
‚
·
°
‡
F-Lch
64-EN
SPEAKER
LEFT
REAR
Note: Be sure to connect the leads
correctly after identifying the ISO
connector terminals for the Battery
and Ignition (ACC).
R-Lch
R-Rch
F-Rch
1 ISO Connector (Included)
2 Illumination Lead (Orange)
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will allow the
backlighting of the IVX-C806/IVX-M706/CVA-1006R
to dim whenever the vehicle‘s lights are turned on.
3 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the
vehicle’s battery.
4 Fuse Holder (7.5A)
5 Ground Lead (Black)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet metal
screw provided.
6 Power Supply Connector
7 Remote Control Interface Connector
Connect to the remote control interface box.
8 ISO Antenna Converter Plug (Included)
9 ISO Antenna Plug
0 Antenna Extension Cable
! I/F (Interface) Lead
@ Remote Control Output Lead (White/Brown)
# Connect this lead to the remote control input
lead. This lead outputs the controlling signals
from the remote control.
$ Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
% To amplifier or equalizer
^ Remote Output Terminal
& Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power
antenna, if applicable.
* Audio Interrupt In Lead (Pink/Black)
( To vehicle phone
) Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals
to the IVX-C806/IVX-M706/CVA-1006R.
⁄ Connect this lead to the parking brake lead powered
when parking brake is engaged.
¤ Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s
fuse box or another unused power source which
provides (+) 12V only when the ignition is turned on
or in the accessory position.
‹ Fuse Holder (15A)
› System Switch
When connecting an equalizer or divider using AiNET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
Be sure to turn the power off to the unit before changing
the switch position.
fi Antenna Receptacle
fl Display Output Terminal
Connect a monitor to this terminal using the I/F lead
(included).
‡ Right Front (+) Speaker Output Lead (Grey)
° Right Front (–) Speaker Output Lead (Grey/
Black)
· Right Rear (–) Speaker Output Lead (Violet/
Black)
‚ Right Rear (+) Speaker Output Lead (Violet)
¡ Left Rear (+) Speaker Output Lead (Green)
™ Left Rear (–) Speaker Output Lead (Green/Black)
£ Left Front (–) Speaker Output Lead (White/Black)
¢ Left Front (+) Speaker Output Lead (White)
65-EN
Installation and Connections
System Wiring Diagram
2
REMOTE IN
REMOTE OUT
AUX2
(White/Brown)
(White/Brown)
<Tuner>
(
0
FM ANTENNA
R
!
AUDIO
L(MONO)
4
TV Tuner
∗
AUX INPUT
VIDEO
NAVIGATION INPUT
5 6
(Sold Separately)
ON
OFF
AUX1
AUX2
3
KCE-150V
(Sold Separately)
R
AUDIO
L(MONO)
AUX OUTPUT
VIDEO
7
1
DISPLAY OUTPUT
REMOTE OUT
Ai-NET
R
@
Navigation system
POWER SUPPLY
L
(NVE-N077P)
FRONT
REAR
9
(Sold Separately)
REMOTE IN
2
AUDIO
SUB W.
REMOTE OUT
AUX1
(White/Brown)
#
(White/Brown)
NORM
(Yellow)
$
EQ/DIV
DVD Video
Player
%
(Sold Separately)
Equalizer equipped with Ai-NET
8
^
)
(Sold Separately)
7
7
(Red: R-ch)
!
(White: L-ch)
⁄
(Red: R-ch)
!
(White: L-ch)
∗ Colour Control of TV Tuner is set to OFF.
&
When connecting with NVE-N055PV of the Alpine’s Navigation System
IVX-C801/
IVX-M706/
CVA-1006R
@
(NVE-N055PV)
Connector Box
Navigation
CD Changer (Ai-NET)
(Sold Separately)
NTSC
RGB
*
When connecting with NVE-N055PS of the Alpine’s Navigation System
To Video output terminal
IVX-C801/
IVX-M706/
CVA-1006R
RGB Convertor Cable
KCE-030N (Sold Separately)
Connector Box
DISP CONT IN
(Yellow/Red)
GUIDE CONT IN
(White/Green)
66-EN
Navigation
GUIDE OUT
REMOTE OUT
(White/Brown)
RCA Extension Cable
(Included with Navigation)
(NVE-N055PS)
VIDEO IN
REMOTE IN
(White/Brown)
DISP CONT OUT
(Yellow/Red)
GUIDE CONT OUT
(White/Green)
To Guide output terminal
When connecting the DVD Changer
REMOTE IN
2
(White/Brown)
REMOTE OUT
AUX1
(White/Brown)
<Tuner>
To VIDEO
OUTPUT
terminal
(Yellow)
FM ANTENNA
AUX1
AUX2
R
¤
DVD Changer
AUDIO
4
L(MONO)
AUX INPUT
VIDEO
(Sold Separately)
NAVIGATION INPUT
7
R
AUDIO
L(MONO)
7
AUX OUTPUT
VIDEO
7
1
DISPLAY OUTPUT
REMOTE OUT
Ai-NET
POWER SUPPLY
L
R
‹
FRONT
REAR
AUDIO
SUB W.
&
CD Changer (Ai-NET)
(Sold Separately)
#
NORM
EQ/DIV
1 Remote Output Terminal
2 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead.
This lead outputs the controlling signals from the
remote control.
3 To AUX Audio/Video Input (AUX2) Terminals
4 AUX Video Input (AUX1) Terminal
Connect the video output lead of a DVD video player
or DVD Changer to this terminal.
5 RGB Input Terminal
Connect this to the RGB output terminal of the
Navigation System.
6 AUX Output Terminal
Use when connecting an optional monitor etc.
7 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
8 Rear/Front Input Terminal
Use when connecting an amplifier/equalizer.
9 Subwoofer Input Terminal
Connect the output lead of an amplifier for the
subwoofer to this terminal.
0 To Video output Terminals
! RCA Extension Cable (Sold separately)
@ RGB Cable (Included with Navigation)
# System Switch
When connecting an equalizer or divider using AiNET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
Be sure to turn the power off to the unit before changing
the switch position.
$ RCA Extension Cable (Included with DVD video
player)
% Ai-NET Cable (Included with DVD video player)
^ Ai-NET Cable (Included with Equalizer)
& Ai-NET Cable (Included with CD Changer)
* RGB/NTSC Output Switch
To display the picture of Navigation system on the
external monitor, place the switch in the NTSC
Output position.
( AUX Audio Input (AUX1) Terminals
) Front Output RCA Connectors
⁄ Rear Output RCA Connectors
¤ RCA Extension cable (Included with DVD
Changer)
‹ Ai-NET Cable (Included with DVD Changer)
67-EN
68-EN