CCD-1_e.book 1 ページ 2004年5月31日 月曜日 午後2時2分
Owner’s Manual
Thank you for purchasing the EDIROL CCD-1.
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and
“IMPORTANT NOTES” (p. 2 – p. 4). These sections provide important information concerning
the proper operation of the unit. Additionally, in order to feel assured that you have gained a
good grasp of every feature provided by your new unit, Owner’s manual should be read in its
entirety. The manual should be saved and kept on hand as a convenient reference.
CCD-1 Features
•
•
•
•
380,000-pixel 1/3" color CCD image sensor
Highly-sensitive CCD works with a minimum illumination of 0.1 Lux
Auto Iris Lens handles a wide range of lighting in locations from dark to bright
Numerous settable functions
Flickerless Mode, Backlight Compensation, Auto Gain Control, White Balance,
Mirror, Digital Zoom (x1/x2)
• Focal point adjustable with lens
• Included bracket provides freedom in setting the vertical and horizontal camera angle
• Included adaptor allows attachment of the camera to mic stands
Package Contents
•
•
•
•
CCD-1 (Camera)
AC Adaptor
Mic Stand Adaptor
Video Power Extension Cord (5 m)
• CS-Mount Lens (8 mm, F1.2)
• Bracket
• BNC-RCA Pin Adaptor Plug
• Owner's Manual
Copyright © 2004 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
CCD-1_e.book 2 ページ 2004年5月31日 月曜日 午後2時2分
USING THE UNIT SAFELY
The
symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers
other adverse effects
respect to the home
furnishings, as well
animals or pets.
to damage or
caused with
and all its
to domestic
001
• Before using this unit, make sure to
read the instructions below, and the
Owner’s Manual.
..................................................................................................
002c
• Do not open (or modify in any way)
the unit or its AC adaptor.
..................................................................................................
003
• Do not attempt to repair the unit, or
replace parts within it (except when
this manual provides specific instructions directing you to do so). Refer all
servicing to your retailer, the nearest
Roland Service Center, or an authorized Roland distributor, as listed on
the “Information” page.
..................................................................................................
004
• Never use or store the unit in places
that are:
• Subject to temperature extremes
(e.g., direct sunlight in an enclosed
vehicle, near a heating duct, on top
of heat-generating equipment); or
are
• Damp (e.g., baths, washrooms, on
wet floors); or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
2
The
symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
007
• Make sure you always have the unit
placed so it is level and sure to remain
stable. Never place it on stands that
could wobble, or on inclined surfaces.
..................................................................................................
008c
• Be sure to use only the AC adaptor
supplied with the unit. Also, make
sure the line voltage at the installation
matches the input voltage specified on the AC
adaptor’s body. Other AC adaptors may use a
different polarity, or be designed for a
different voltage, so their use could result in
damage, malfunction, or electric shock.
..................................................................................................
008e
• Use only the attached power-supply
cord. Also, the supplied power cord
must not be used with any other
device.
..................................................................................................
009
• Do not excessively twist or bend the
power cord, nor place heavy objects
on it. Doing so can damage the cord,
producing severed elements and short
circuits. Damaged cords are fire and shock
hazards!
..................................................................................................
011
• Do not allow any objects (e.g.,
flammable material, coins, pins); or
liquids of any kind (water, soft drinks,
etc.) to penetrate the unit.
CCD-1_e.book 3 ページ 2004年5月31日 月曜日 午後2時2分
013
• In households with small children, an
adult should provide supervision until
the child is capable of following all the
rules essential for the safe operation of
the unit.
..................................................................................................
014
• Protect the unit from strong impact.
(Do not drop it!)
..................................................................................................
015
• Do not force the unit’s power-supply
cord to share an outlet with an unreasonable number of other devices. Be
especially careful when using
extension cords—the total power used
by all devices you have connected to
the extension cord’s outlet must never
exceed the power rating (watts/
amperes) for the extension cord.
Excessive loads can cause the
insulation on the cord to heat up and
eventually melt through.
..................................................................................................
016
• Before using the unit in a foreign
country, consult with your retailer, the
nearest Roland Service Center, or an
authorized Roland distributor, as
listed on the “Information” page.
101b
• The unit and the AC adaptor should
be located so their location or position
does not interfere with their proper
ventilation.
..................................................................................................
102c
• Always grasp only the plug on the AC
adaptor cord when plugging into, or
unplugging from, an outlet or this unit.
103b
• At regular intervals, you should
unplug the AC adaptor and clean it by
using a dry cloth to wipe all dust and
other accumulations away from its
prongs. Also, disconnect the power
plug from the power outlet whenever
the unit is to remain unused for an
extended period of time. Any accumulation of dust between the power plug
and the power outlet can result in
poor insulation and lead to fire.
..................................................................................................
104
• Try to prevent cords and cables from
becoming entangled. Also, all cords
and cables should be placed so they
are out of the reach of children.
..................................................................................................
106
• Never climb on top of, nor place heavy
objects on the unit.
..................................................................................................
107c
• Never handle the AC adaptor or its
plugs with wet hands when plugging
into, or unplugging from, an outlet or
this unit.
..................................................................................................
108b
• Before moving the unit, disconnect the
AC adaptor and all cords coming from
external devices.
..................................................................................................
109b
• Before cleaning the unit, turn off the
power and unplug the AC adaptor
from the outlet.
..................................................................................................
110b
• Whenever you suspect the possibility
of lightning in your area, disconnect
the AC adaptor from the outlet.
..................................................................................................
118
• Should you remove BNC/RCA phono
converter plug, make sure to put them
in a safe place out of children's reach,
so there is no chance of them being
swallowed accidentally.
3
CCD-1_e.book 4 ページ 2004年5月31日 月曜日 午後2時2分
IMPORTANT NOTES
291a
In addition to the items listed under “USING THE UNIT SAFELY” on page 2, please read and
observe the following:
Power Supply
Maintenance
301
401a
• Do not connect this unit to same electrical
outlet that is being used by an electrical
appliance that is controlled by an inverter
(such as a refrigerator, washing machine,
microwave oven, or air conditioner), or that
contains a motor. Depending on the way in
which the electrical appliance is used, power
supply noise may cause this unit to
malfunction or may produce audible noise. If
it is not practical to use a separate electrical
outlet, connect a power supply noise filter
between this unit and the electrical outlet.
• For everyday cleaning wipe the unit with a
soft, dry cloth or one that has been slightly
dampened with water. To remove stubborn
dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be sure
to wipe the unit thoroughly with a soft, dry
cloth.
302
• The AC adaptor will begin to generate heat
after long hours of consecutive use. This is
normal, and is not a cause for concern.
307
• Before connecting this unit to other devices,
turn off the power to all units. This will help
prevent malfunctions and/or damage to
speakers or other devices.
Placement
352a
• This device may interfere with radio and
television reception. Do not use this device in
the vicinity of such receivers.
352b
• Noise may be produced if wireless communications devices, such as cell phones, are
operated in the vicinity of this unit. Such
noise could occur when receiving or initiating
a call, or while conversing. Should you
experience such problems, you should
relocate such wireless devices so they are at a
greater distance from this unit, or switch
them off.
355b
• When moved from one location to another
where the temperature and/or humidity is
very different, water droplets (condensation)
may form inside the unit. Damage or
malfunction may result if you attempt to use
the unit in this condition. Therefore, before
using the unit, you must allow it to stand for
several hours, until the condensation has
completely evaporated.
4
402
• Never use benzine, thinners, alcohol or
solvents of any kind, to avoid the possibility
of discoloration and/or deformation.
Additional
Precautions
553
• Use a reasonable amount of care when using
the unit’s buttons, sliders, or other controls;
and when using its jacks and connectors.
Rough handling can lead to malfunctions.
556
• When connecting / disconnecting all cables,
grasp the connector itself—never pull on the
cable. This way you will avoid causing shorts,
or damage to the cable’s internal elements.
559a
• When you need to transport the unit, package
it in the box (including padding) that it came
in, if possible. Otherwise, you will need to use
equivalent packaging materials.
CCD-1_e.book 5 ページ 2004年5月31日 月曜日 午後2時2分
Names of Things and What They Do
fig.panel.eps
1
2
5
4
3
6
7
8
9
10
1. C-Mount Lens Attachment Screw
Used to attach the C-mount lens to the CCD-1.
The CS-mount lens is normally used, so the C-mount lens attachment screw is
not usually necessary.
2. CS-Mount Lens Attachment Screw
Use this to attach the included CS-mount lens to the CCD-1.
3. Camera Mounting Holes
Used for attaching the included bracket to the CCD-1. The holes are 1/4” in
diameter, the same size as attachment screws on conventional camera tripods.
There is one hole each on the top and bottom sides. Use the one that best suits
your setup.
* If attaching the CCD-1 to a mic stand, use the mic stand adaptor included with the unit.
4. DC Iris Lens Adjustment Control
Adjusts the lens iris. Rotate to the right (clockwise) to make the image brighter,
or to the left (counterclockwise) to make the image darker.
Differences in hue may occur when more than one CCD-1 is used. Adjust the
DC iris lens control while focusing the cameras on a white object until the tone
is uniform.This step of adjusting the iris while focusing the cameras on a white
object is also recommended when using the CCD-1 together with another type
of camera.
* Shining a strong light on the object may cause the object to be overly bright, which may turn the
screen white and prevent proper imaging. In such instances, rotate the DC iris lens adjustment
control to adjust the brightness.
* In certain situations, such as when the amount of light on the object changes suddenly, it may
take some time after adjusting the DC iris lens control for the Auto Iris function to complete
processing.
5
CCD-1_e.book 6 ページ 2004年5月31日 月曜日 午後2時2分
Names of Things and What They Do
5. Iris Select Switch
Allows you to select either DC or VIDEO to match the type of lens being used.
Set this to DC when using the CCD-1 in combination with the lens that was
supplied with it.
6. Auto Iris Connector
Plug the CS-mount lens cable to the Auto Iris connector when using the CCD-1
with the included CS-mount lens attached.
7. Function Select Switch
Switch used for setting the function.
AGC OFF
BLC OFF
ALC
AWC
REVERSE
x2
fig.sw-table
AES
BLC ON
AGC ON
x1
NORMAL
ATW
*
(7) and (8) are not used with the CCD-1.
Settings Chart
Iris Mode
OFF
1
Switches the Iris mode.
ON
Switches the CCD-1 to Auto Iris mode. This adjusts
the diaphragm automatically.
AES Auto Digital Shutter Mode
Switches the CCD-1 to Flickerless mode. Set to Flickerless mode when using the CCD-1 in 50 Hz regions.
This eliminates flicker in the images.
ALC Auto Level Control
Automatically adjusts the iris.
BLC (Backlight Compensation)
2
Function that compensates for higher backlight.
ON
Backlight compensation is performed automatically.
Use this setting when the background of the object is
relatively bright.
OFF
The backlight is not compensated for automatically.
ON
OFF
The gain level is adjusted automatically.
The gain level is fixed.
ATW
Automatically tracks and adjusts the white level.
Automatically tracks and adjusts the white level, then
locks it in.
AGC (Auto Gain Control)
3
Auto Gain Control
White Balance
4
Setting used in compensating for the white level
in the white balance.
AWB
Mirror
5
A mirror-like effect that
reverses the image left to
right.
Normal
Reverse
The actual image as captured by the camera is displayed in the monitor.
The image taken by the camera is reversed laterally
then displayed in the monitor.
Digital Zoom
6
6
Allows the images to be
enlarged.
x1
The images are shown in the monitor at the normal
size.
x2
The images are shown in the monitor at twice the normal size.
CCD-1_e.book 7 ページ 2004年5月31日 月曜日 午後2時2分
Names of Things and What They Do
8. POWER Indicator
Lights in green when the power is on.
9. AC Adaptor Jack
Connect the included AC adaptor here.
Be sure to use only the AC adaptor included with this camera.
10. BNC Video Signal Output Connector
Connect the included BNC/RCA phono converter plug here, then connect the
RCA phono type AV cable to a television or monitor.
7
CCD-1_e.book 8 ページ 2004年5月31日 月曜日 午後2時2分
Setup and Connections
Attaching the Lens
The CCD-1 is focused manually. Adjust the control at the base of the lens to bring
the object into focus according to the distance between the object and the camera.
1. Use the CS-mount lens attachment screw to attach the included CS-mount
lens.
2. Connect the included CS-mount lens cable to the Auto Iris connector on the
CCD-1’s rear panel.
Attaching the Camera to a Mic Stand
1. Attach the upper part of the included bracket to the camera mounting hole on
the CCD-1 camera housing.
2. Attach the bottom part of the bracket to the mic stand adaptor.
3. Attach the mic stand adaptor to the mic stand.
Connection Example
The figure shows two CCD-1 cameras connected to a V-4 video mixer.
fig.V-4
• Differences in hue may result when more than one CCD-1 is used.
Adjust the DC iris lens control while focusing the cameras on a white object
until a uniform hue is achieved.
• Using the camera in dark environments may cause noise to appear in the
screen.
• Shining a spotlight at the camera when using it in darker environments may
disrupt the white balance.
• Setting the Digital Zoom to x2 results in a coarser image.
8
CCD-1_e.book 9 ページ 2004年5月31日 月曜日 午後2時2分
Specifications
Dimensions
Weight
TV System
Image Sensor
CCD Total Pixels
Pixels
Scanning System
Sync System
Minimum Illumination
Resolution
S/N Ratio
VIDEO Output
Gamma Correction
Operation Temperature
Flickerless
Gain Control
B.L.C. Function
White Balance
Mirror Function
Digital Zoom
Auto Iris
Electronic Shutter
Power Supply
Accessories
NTSC
PAL
50.5 (W) x 110 (D) x 64.5 (H) mm
2 (W) x 4-3/8 (D) x 2-9/16 (H) inches
Camera 335 g / 12 oz
Lens 53 g / 2 oz
NTSC
PAL
1/3-inch CCD
816 (H) x 495 (D) pixels
798 (H) x 548 (D) pixels
380,000 pixels
525 lines, 60 fields/sec
625 lines, 50 fields/sec
Internal
0.1 Lux / F 1.2
480 TVL
52 dB (MIN) / 60 dB (TYP: AGC OFF)
Composite 1.0 V 9-9 at 75 ohms
0.45
-20 – 50˚C (humidity 85 %)
ON / OFF switchable
AGC ON / OFF switchable
ON / OFF switchable
ATW / AWB switchable
NORMAL / REVERSE switchable
ON (x2) / OFF (x1) switchable
VIDEO / DC / A.E.S.
1/60 – 1/100000 sec.
1/50 – 1/100000 sec.
DC 12 V / 150 mA
AC adaptor, CS mount lens (8 mm / 3/8 inchs, F 1.2), Bracket,
Mic Stand Adaptor, BNC-RCA Pin Adaptor Plug,
Video Power Extension Cord (5 m), Owner's Manual
* In the interest of product improvement, the specifications and/or appearance of this unit are
subject to change without prior notice.
Function Select Switch Setting
Color Control setting
Electronic Shutter setting
Iris Adjust Level
120 %
1/100 sec.
95 K
Function Select Switch
For more detailed information about the functions, refer to “Function Select Switch” (p. 6).
fig.sw1
1 Iris Mode
2 BLC
3 AGC
4 White Balance
5 Mirror
6 Digital Zoom
0
1
1
1
1
1
9
CCD-1_e.book 10 ページ 2004年5月31日 月曜日 午後2時2分
For EU Countries
This product complies with the requirements of European Directive 89/336/EEC.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Information
When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor
in your country as shown below.
U. S. A. / CANADA
EUROPE
EDIROL (Europe) Ltd.
Studio 3.4 114 Power Road
London W4 5PY
U. K.
TEL: +44 (0)20 8747 5949
FAX:+44 (0)20 8747 5948
http://www.edirol.com/europe
Deutschland
TEL: 0700 33 47 65 20
France
TEL: 0810 000 371
Italia
TEL: 02 93778329
ASIA
EUROPE
TAIWAN
AUSTRIA
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Roland Elektronische
Musikinstrumente HmbH.
Austrian Office
Room 5, 9fl. No. 112 Chung Shan
N.Road Sec.2, Taipei, TAIWAN,
R.O.C.
TEL: (02) 2561 3339
AUSTRALIA
AUSTRALIA
Roland Corporation
Australia Pty., Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
TEL: (02) 9982 8266
CENTRAL/LATIN
AMERICA
BRAZIL
Roland Brasil Ltda
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
Eduard-Bodem-Gasse 8,
A-6020 Innsbruck, AUSTRIA
TEL: (0512) 26 44 260
BELGIUM/HOLLAND/
LUXEMBOURG
Roland Benelux N. V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: (014) 575811
CZECH REP.
K-AUDIO
Kardasovska 626.
CZ-198 00 Praha 9,
CZECH REP.
TEL: (2) 666 10529
DENMARK
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
TEL: 3916 6200
FRANCE
Roland France SA
4, Rue Paul Henri SPAAK,
Parc de l'Esplanade, F 77 462 St.
Thibault, Lagny Cedex FRANCE
TEL: 01 600 73 500
EDIROL Corporation North
America
425 Sequoia Drive, Suite 114
Bellingham, WA 98226
U. S. A.
TEL: (360) 594-4276
FAX: (360) 594-4271
http://www.edirol.com/
GERMANY
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844 Norderstedt,
GERMANY
TEL: (040) 52 60090
GREECE
STOLLAS S.A.
Music Sound Light
NORWAY
Roland Electronics
de España, S. A.
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: 2273 0074
Calle Bolivia 239, 08020
Barcelona, SPAIN
TEL: (93) 308 1000
POLAND
Roland Scandinavia A/S
SWEDISH SALES OFFICE
MX MUSIC SP.Z.O.O.
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
HUNGARY
PORTUGAL
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint, HUNGARY
TEL: (23) 511011
IRELAND
Roland Ireland
Tecnologias Musica e Audio,
Roland Portugal, S.A.
Cais Das Pedras, 8/9-1 Dto
4050-465 PORTO
PORTUGAL
TEL: (022) 608 00 60
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
ROMANIA
ITALY
RUSSIA
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
SPAIN
Roland Scandinavia Avd.
Kontor Norge
FBS LINES
Piata Libertatii 1,
535500 Gheorgheni, ROMANIA
TEL: (266) 364 609
MuTek
3-Bogatyrskaya Str. 1.k.l
107 564 Moscow, RUSSIA
TEL: (095) 169 5043
SWEDEN
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
SWITZERLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
UKRAINE
TIC-TAC
Mira Str. 19/108
P.O. Box 180
295400 Munkachevo, UKRAINE
TEL: (03131) 414-40
UNITED KINGDOM
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
UNITED KINGDOM
TEL: (01792) 702701
FINLAND
Roland Scandinavia As,
Filial Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
As of May 1, 2004 (EDIROL-2)